1 files changed, 124 insertions, 32 deletions
diff --git a/po/zh_CN.po b/po/zh_CN.po
index e385eca..87b129b 100644
--- a/po/zh_CN.po
+++ b/po/zh_CN.po
@@ -6,6 +6,7 @@
 # Aron Xu <[email protected]>, 2009
 # Ma Xiaojun <[email protected]>, 2012
 # Funda Wang <[email protected]>, 2003
+# liushuyu011 <[email protected]>, 2016
 # Liu Songhe <[email protected]>, 2003
 # Ray Wang <[email protected]>, 2009
 # Wang Li <[email protected]>, 2002
@@ -13,14 +14,14 @@
 # Wylmer Wang <[email protected]>, 2013
 # Xiong Jiang <[email protected]>, 2003
 # Yang Zhang <[email protected]>, 2009
-# 白铭骢 <[email protected]>, 2015
+# Mingcong Bai <[email protected]>, 2015
 msgid ""
 msgstr ""
 "Project-Id-Version: MATE Desktop Environment\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-09-06 20:16+0200\n"
-"PO-Revision-Date: 2015-10-23 19:50+0000\n"
-"Last-Translator: 白铭骢 <[email protected]>\n"
+"POT-Creation-Date: 2016-03-21 17:48+0300\n"
+"PO-Revision-Date: 2016-03-26 12:12+0000\n"
+"Last-Translator: liushuyu011 <[email protected]>\n"
 "Language-Team: Chinese (China) (http://www.transifex.com/mate/MATE/language/zh_CN/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -166,129 +167,220 @@ msgstr "使用公制单位"
 msgid "Use metric units instead of english units."
 msgstr "使用公制单位，而不是英制单位。"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:9
+#. TRANSLATORS: pick a default distance unit for your locale, see key
+#. description
+#. for valid values; values must be quoted
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:11
+msgid "'miles'"
+msgstr "'英里'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:12
 msgid "Distance unit"
 msgstr "距离单位"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:10
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:13
 msgid "The unit to use for visibility. Values: 'meters', 'km' ,'miles'."
 msgstr "用于能见度的单位。取值有：'meters', 'km' ,'miles'."
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:11
+#. TRANSLATORS: pick a default pressure unit for your locale, see key
+#. description
+#. for valid values; values must be quoted
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:16
+msgid "'inHg'"
+msgstr "‘英尺汞柱’"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:17
 msgid "Pressure unit"
 msgstr "气压单位"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:12
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:18
 msgid ""
-"The unit to use for pressure. Values: 'kPa', 'hPa', 'mb', 'mmHg', 'inHg, "
+"The unit to use for pressure. Values: 'kPa', 'hPa', 'mb', 'mmHg', 'inHg', "
 "'atm'."
 msgstr "压力单位。取值有：'kPa', 'hPa', 'mb', 'mmHg', 'inHg, 'atm'."
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:13
+#. TRANSLATORS: pick a default speed unit for your locale, see key description
+#. for valid values; values must be quoted
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:21
+msgid "'knots'"
+msgstr "'节'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:22
 msgid "Speed unit"
 msgstr "速度单位"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:14
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:23
 msgid ""
 "The unit to use for wind speed. Values: 'm/s', 'km/h, 'mph', 'knots', "
 "'Beaufort scale'."
 msgstr "默认风速单位。取值有： 'm/s', 'km/h, 'mph', 'knots', 'Beaufort scale'。"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:15
+#. TRANSLATORS: pick a temperature unit that should be used by default in your
+#. locale, see key description for valid values; values must be quoted
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:26
+msgid "'Fahrenheit'"
+msgstr "'华氏度'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:27
 msgid "Temperature unit"
 msgstr "温度单位"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:16
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:28
 msgid ""
 "The unit to use for temperature. Values: 'Kelvin', 'Centigrade', "
 "'Fahrenheit'."
 msgstr "温度单位。取值有：'Kelvin', 'Centigrade', 'Fahrenheit'."
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:17
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:29
 msgid "Not used anymore"
 msgstr "不再使用"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:18
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:30
 msgid "Display radar map"
 msgstr "显示雷达图"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:19
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:31
 msgid "Fetch a radar map on each update."
 msgstr "每次更新时取回雷达图。"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:20
+#. TRANSLATORS: Change this to the default location name, used
+#. when you first start the Weather Applet. This is the common
+#. localised name that corresponds to the location code
+#. (DEFAULT_CODE) you will put on the next message. For example, for
+#. the Greek locale, we set this to "Athens", the capital city and we
+#. write it in Greek. It's important to translate this name. If you
+#. do not require a DEFAULT_LOCATION, set this to
+#. "DEFAULT_LOCATION".
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:40
+msgid "'DEFAULT_LOCATION'"
+msgstr "'DEFAULT_LOCATION'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:41
 msgid "Weather location information"
 msgstr "天气位置信息"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:21
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:42
 msgid "Weather location information."
 msgstr "天气位置信息。"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:22
+#. TRANSLATORS: Change this to the code of your default location
+#. that corresponds to the DEFAULT_LOCATION name you put above. This
+#. is normally a four-letter (ICAO) code and can be found in
+#. https://github.com/mate-
+#. desktop/libmateweather/blob/master/data/Locations.xml.in.
+#. NB. The web page is over 1.7MB in size. Pick a default location
+#. like a capital city so that it would be ok for more of your users.
+#. For example, for Greek, we use "LGAV" for the capital city, Athens.
+#. If you do not require a DEFAULT_CODE, set this to "DEFAULT_CODE".
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:51
+msgid "'DEFAULT_CODE'"
+msgstr "'DEFAULT_CODE'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:52
 msgid "Nearby city"
 msgstr "临近城市"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:23
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:53
 msgid ""
 "Nearby major zone, such as a capital city, as found from "
 "https://raw.github.com/mate-"
 "desktop/libmateweather/master/data/Locations.xml.in"
 msgstr "附近的主要城市，比如一个首都或省会，可在 https://raw.github.com/mate-desktop/libmateweather/master/data/Locations.xml.in 中查询"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:24
+#. TRANSLATORS: Change this to the zone of your default location
+#. that corresponds to the DEFAULT_LOCATION and DEFAULT_CODE you put
+#. above. Normally, US and Canada locations have zones while the rest
+#. do not. Check
+#. https://github.com/mate-
+#. desktop/libmateweather/blob/master/data/Locations.xml.in
+#. as any zone you put here must also be present in the Locations.xml
+#. file. If your default location does not have a zone, set this to
+#. "DEFAULT_ZONE".
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:62
+msgid "'DEFAULT_ZONE'"
+msgstr "'DEFAULT_ZONE'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:63
 msgid "Zone location"
 msgstr "区域位置"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:25
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:64
 msgid ""
 "A unique zone for the city, as found from https://raw.github.com/mate-"
 "desktop/libmateweather/master/data/Locations.xml.in"
 msgstr "城市的唯一区域，可在 https://raw.github.com/mate-desktop/libmateweather/master/data/Locations.xml.in 查询"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:26
+#. TRANSLATORS: Change this to the radar of your default location
+#. that corresponds to the DEFAULT_LOCATION and DEFAULT_CODE you put
+#. above. Normally, US and Canada locations have radar names while the
+#. rest do not. Check
+#. https://github.com/mate-
+#. desktop/libmateweather/blob/master/data/Locations.xml.in
+#. as any radar you put here must also be present in the Locations.xml
+#. file. If your default location does not have a radar, set this to
+#. " " (or space).
+#. If you do not have a default location, set this to DEFAULT_RADAR.
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:74
+msgid "'DEFAULT_RADAR'"
+msgstr "'DEFAULT_RADAR'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:75
 msgid "Radar location"
 msgstr "雷达位置"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:27
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:76
 msgid ""
 "A three-digit-long code for retrieving radar maps from weather.com, found "
 "from https://raw.github.com/mate-"
 "desktop/libmateweather/master/data/Locations.xml.in"
 msgstr "从 weather.com 获取雷达地图的三位数代码，可在 https://raw.github.com/mate-desktop/libmateweather/master/data/Locations.xml.in 查询"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:28
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:77
 msgid "Weather for a city"
 msgstr "城市天气"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:29
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:78
 msgid "The city that mateweather displays information for."
 msgstr "mateweather 显示信息的城市。"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:30
+#. TRANSLATORS: Change this to the coordinates of your default
+#. location that corresponds to the DEFAULT_LOCATION and DEFAULT_CODE
+#. you put above. Check
+#. https://github.com/mate-
+#. desktop/libmateweather/blob/master/data/Locations.xml.in
+#. as any coordinates you put here must also be present in the
+#. Locations.xml file. If your default location does not have known
+#. coordinates, set this to " " (or space). If you do not have a
+#. default location, set this to DEFAULT_COORDINATES.
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:87
+msgid "'DEFAULT_COORDINATES'"
+msgstr "'DEFAULT_COORDINATES'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:88
 msgid "Location coordinates"
 msgstr "位置坐标"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:31
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:89
 msgid ""
 "Latitude and longitude of your location expressed in DD-MM-SS[NS] DD-MM-"
 "SS[EW]."
 msgstr "您所在位置的经纬度，格式为“度-分-秒[NS] 度-分-秒[EW]”"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:32
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:90
 msgid "Use custom url for the radar map"
 msgstr "对雷达图使用自定义地址"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:33
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:91
 msgid ""
 "If true, then retrieve a radar map from a location specified by the "
 "\"radar\" key."
 msgstr "如果为 true，则从“radar”键中指定的位置取回雷达图。"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:34
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:92
 msgid "Url for the radar map"
 msgstr "雷达图的 URL"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:35
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:93
 msgid "The custom url from where to retrieve a radar map."
 msgstr "收取雷达图的自定义 URL。"