/* -*- mode: C; c-file-style: "gnu"; indent-tabs-mode: nil; -*- */ /* Simple box operations */ /* * Copyright (C) 2005, 2006 Elijah Newren * [meta_rectangle_intersect() is copyright the GTK+ Team according to Havoc, * see gdkrectangle.c. As far as Havoc knows, he probably wrote * meta_rectangle_equal(), and I'm guessing it's (C) Red Hat. So...] * Copyright (C) 1995-2000 GTK+ Team * Copyright (C) 2002 Red Hat, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA * 02110-1301, USA. */ #include "boxes.h" #include "util.h" #include /* Just for the definition of the various gravities */ char* meta_rectangle_to_string (const MetaRectangle *rect, char *output) { /* 25 chars: 2 commas, space, plus, trailing \0 + 5 for each digit. * Should be more than enough space. Note that of this space, the * trailing \0 will be overwritten for all but the last rectangle. */ g_snprintf (output, RECT_LENGTH, "%d,%d +%d,%d", rect->x, rect->y, rect->width, rect->height); return output; } char* meta_rectangle_region_to_string (GList *region, const char *separator_string, char *output) { /* 27 chars: 2 commas, 2 square brackets, space, plus, trailing \0 + 5 * for each digit. Should be more than enough space. Note that of this * space, the trailing \0 will be overwritten for all but the last * rectangle. */ char rect_string[RECT_LENGTH]; GList *tmp = region; char *cur = output; if (region == NULL) g_snprintf (output, 10, "(EMPTY)"); while (tmp) { MetaRectangle *rect = tmp->data; g_snprintf (rect_string, RECT_LENGTH, "[%d,%d +%d,%d]", rect->x, rect->y, rect->width, rect->height); cur = g_stpcpy (cur, rect_string); tmp = tmp->next; if (tmp) cur = g_stpcpy (cur, separator_string); } return output; } char* meta_rectangle_edge_to_string (const MetaEdge *edge, char *output) { /* 25 chars: 2 commas, space, plus, trailing \0 + 5 for each digit. * Should be more than enough space. Note that of this space, the * trailing \0 will be overwritten for all but the last rectangle. * * Plus 2 for parenthesis, 4 for 2 more numbers, 2 more commas, and * 2 more spaces, for a total of 10 more. */ g_snprintf (output, EDGE_LENGTH, "[%d,%d +%d,%d], %2d, %2d", edge->rect.x, edge->rect.y, edge->rect.width, edge->rect.height, edge->side_type, edge->edge_type); return output; } char* meta_rectangle_edge_list_to_string (GList *edge_list, const char *separator_string, char *output) { /* 27 chars: 2 commas, 2 square brackets, space, plus, trailing \0 + 5 for * each digit. Should be more than enough space. Note that of this * space, the trailing \0 will be overwritten for all but the last * rectangle. * * Plus 2 for parenthesis, 4 for 2 more numbers, 2 more commas, and * 2 more spaces, for a total of 10 more. */ char rect_string[EDGE_LENGTH]; char *cur = output; GList *tmp = edge_list; if (edge_list == NULL) g_snprintf (output, 10, "(EMPTY)"); while (tmp) { MetaEdge *edge = tmp->data; MetaRectangle *rect = &edge->rect; g_snprintf (rect_string, EDGE_LENGTH, "([%d,%d +%d,%d], %2d, %2d)", rect->x, rect->y, rect->width, rect->height, edge->side_type, edge->edge_type); cur = g_stpcpy (cur, rect_string); tmp = tmp->next; if (tmp) cur = g_stpcpy (cur, separator_string); } return output; } MetaRectangle meta_rect (int x, int y, int width, int height) { MetaRectangle temporary; temporary.x = x; temporary.y = y; temporary.width = width; temporary.height = height; return temporary; } int meta_rectangle_area (const MetaRectangle *rect) { g_return_val_if_fail (rect != NULL, 0); return rect->width * rect->height; } gboolean meta_rectangle_intersect (const MetaRectangle *src1, const MetaRectangle *src2, MetaRectangle *dest) { int dest_x, dest_y; int dest_w, dest_h; int return_val; g_return_val_if_fail (src1 != NULL, FALSE); g_return_val_if_fail (src2 != NULL, FALSE); g_return_val_if_fail (dest != NULL, FALSE); return_val = FALSE; dest_x = MAX (src1->x, src2->x); dest_y = MAX (src1->y, src2->y); dest_w = MIN (src1->x + src1->width, src2->x + src2->width) - dest_x; dest_h = MIN (src1->y + src1->height, src2->y + src2->height) - dest_y; if (dest_w > 0 && dest_h > 0) { dest->x = dest_x; dest->y = dest_y; dest->width = dest_w; dest->height = dest_h; return_val = TRUE; } else { dest->width = 0; dest->height = 0; } return return_val; } gboolean meta_rectangle_equal (const MetaRectangle *src1, const MetaRectangle *src2) { return ((src1->x == src2->x) && (src1->y == src2->y) && (src1->width == src2->width) && (src1->height == src2->height)); } void meta_rectangle_union (const MetaRectangle *rect1, const MetaRectangle *rect2, MetaRectangle *dest) { int dest_x, dest_y; int dest_w, dest_h; dest_x = rect1->x; dest_y = rect1->y; dest_w = rect1->width; dest_h = rect1->height; if (rect2->x < dest_x) { dest_w += dest_x - rect2->x; dest_x = rect2->x; } if (rect2->y < dest_y) { dest_h += dest_y - rect2->y; dest_y = rect2->y; } if (rect2->x + rect2->width > dest_x + dest_w) dest_w = rect2->x + rect2->width - dest_x; if (rect2->y + rect2->height > dest_y + dest_h) dest_h = rect2->y + rect2->height - dest_y; dest->x = dest_x; dest->y = dest_y; dest->width = dest_w; dest->height = dest_h; } gboolean meta_rectangle_overlap (const MetaRectangle *rect1, const MetaRectangle *rect2) { g_return_val_if_fail (rect1 != NULL, FALSE); g_return_val_if_fail (rect2 != NULL, FALSE); return !((rect1->x + rect1->width <= rect2->x) || (rect2->x + rect2->width <= rect1->x) || (rect1->y + rect1->height <= rect2->y) || (rect2->y + rect2->height <= rect1->y)); } gboolean meta_rectangle_vert_overlap (const MetaRectangle *rect1, const MetaRectangle *rect2) { return (rect1->y < rect2->y + rect2->height && rect2->y < rect1->y + rect1->height); } gboolean meta_rectangle_horiz_overlap (const MetaRectangle *rect1, const MetaRectangle *rect2) { return (rect1->x < rect2->x + rect2->width && rect2->x < rect1->x + rect1->width); } gboolean meta_rectangle_could_fit_rect (const MetaRectangle *outer_rect, const MetaRectangle *inner_rect) { return (outer_rect->width >= inner_rect->width && outer_rect->height >= inner_rect->height); } gboolean meta_rectangle_contains_rect (const MetaRectangle *outer_rect, const MetaRectangle *inner_rect) { return inner_rect->x >= outer_rect->x && inner_rect->y >= outer_rect->y && inner_rect->x + inner_rect->width <= outer_rect->x + outer_rect->width && inner_rect->y + inner_rect->height <= outer_rect->y + outer_rect->height; } void meta_rectangle_resize_with_gravity (const MetaRectangle *old_rect, MetaRectangle *rect, int gravity, int new_width, int new_height) { /* FIXME: I'm too deep into this to know whether the below comment is * still clear or not now that I've moved it out of constraints.c. * boxes.h has a good comment, but I'm not sure if the below info is also * helpful on top of that (or whether it has superfluous info). */ /* These formulas may look overly simplistic at first but you can work * everything out with a left_frame_with, right_frame_width, * border_width, and old and new client area widths (instead of old total * width and new total width) and you come up with the same formulas. * * Also, note that the reason we can treat NorthWestGravity and * StaticGravity the same is because we're not given a location at * which to place the window--the window was already placed * appropriately before. So, NorthWestGravity for this function * means to just leave the upper left corner of the outer window * where it already is, and StaticGravity for this function means to * just leave the upper left corner of the inner window where it * already is. But leaving either of those two corners where they * already are will ensure that the other corner is fixed as well * (since frame size doesn't change)--thus making the two * equivalent. */ /* First, the x direction */ switch (gravity) { case NorthWestGravity: case WestGravity: case SouthWestGravity: rect->x = old_rect->x; break; case NorthGravity: case CenterGravity: case SouthGravity: /* FIXME: Needing to adjust new_width kind of sucks, but not doing so * would cause drift. */ new_width -= (old_rect->width - new_width) % 2; rect->x = old_rect->x + (old_rect->width - new_width)/2; break; case NorthEastGravity: case EastGravity: case SouthEastGravity: rect->x = old_rect->x + (old_rect->width - new_width); break; case StaticGravity: default: rect->x = old_rect->x; break; } rect->width = new_width; /* Next, the y direction */ switch (gravity) { case NorthWestGravity: case NorthGravity: case NorthEastGravity: rect->y = old_rect->y; break; case WestGravity: case CenterGravity: case EastGravity: /* FIXME: Needing to adjust new_height kind of sucks, but not doing so * would cause drift. */ new_height -= (old_rect->height - new_height) % 2; rect->y = old_rect->y + (old_rect->height - new_height)/2; break; case SouthWestGravity: case SouthGravity: case SouthEastGravity: rect->y = old_rect->y + (old_rect->height - new_height); break; case StaticGravity: default: rect->y = old_rect->y; break; } rect->height = new_height; } /* Not so simple helper function for get_minimal_spanning_set_for_region() */ static GList* merge_spanning_rects_in_region (GList *region) { /* NOTE FOR ANY OPTIMIZATION PEOPLE OUT THERE: Please see the * documentation of get_minimal_spanning_set_for_region() for performance * considerations that also apply to this function. */ GList* compare; compare = region; if (region == NULL) { meta_warning ("Region to merge was empty! Either you have a some " "pathological STRUT list or there's a bug somewhere!\n"); return NULL; } while (compare && compare->next) { MetaRectangle *a = compare->data; GList *other = compare->next; g_assert (a->width > 0 && a->height > 0); while (other) { MetaRectangle *b = other->data; GList *delete_me = NULL; g_assert (b->width > 0 && b->height > 0); /* If a contains b, just remove b */ if (meta_rectangle_contains_rect (a, b)) { delete_me = other; } /* If b contains a, just remove a */ else if (meta_rectangle_contains_rect (b, a)) { delete_me = compare; } /* If a and b might be mergeable horizontally */ else if (a->y == b->y && a->height == b->height) { /* If a and b overlap */ if (meta_rectangle_overlap (a, b)) { int new_x = MIN (a->x, b->x); a->width = MAX (a->x + a->width, b->x + b->width) - new_x; a->x = new_x; delete_me = other; } /* If a and b are adjacent */ else if (a->x + a->width == b->x || a->x == b->x + b->width) { int new_x = MIN (a->x, b->x); a->width = MAX (a->x + a->width, b->x + b->width) - new_x; a->x = new_x; delete_me = other; } } /* If a and b might be mergeable vertically */ else if (a->x == b->x && a->width == b->width) { /* If a and b overlap */ if (meta_rectangle_overlap (a, b)) { int new_y = MIN (a->y, b->y); a->height = MAX (a->y + a->height, b->y + b->height) - new_y; a->y = new_y; delete_me = other; } /* If a and b are adjacent */ else if (a->y + a->height == b->y || a->y == b->y + b->height) { int new_y = MIN (a->y, b->y); a->height = MAX (a->y + a->height, b->y + b->height) - new_y; a->y = new_y; delete_me = other; } } other = other->next; /* Delete any rectangle in the list that is no longer wanted */ if (delete_me != NULL) { /* Deleting the rect we compare others to is a little tricker */ if (compare == delete_me) { compare = compare->next; other = compare->next; a = compare->data; } /* avoid false positive warning in Clang static analyzer */ g_assert (a != delete_me->data); /* Okay, we can free it now */ g_free (delete_me->data); region = g_list_delete_link (region, delete_me); } } compare = compare->next; } return region; } /* Simple helper function for get_minimal_spanning_set_for_region()... */ static gint compare_rect_areas (gconstpointer a, gconstpointer b) { const MetaRectangle *a_rect = (gconstpointer) a; const MetaRectangle *b_rect = (gconstpointer) b; int a_area = meta_rectangle_area (a_rect); int b_area = meta_rectangle_area (b_rect); return b_area - a_area; /* positive ret value denotes b > a, ... */ } /* This function is trying to find a "minimal spanning set (of rectangles)" * for a given region. * * The region is given by taking basic_rect, then removing the areas * covered by all the rectangles in the all_struts list, and then expanding * the resulting region by the given number of pixels in each direction. * * A "minimal spanning set (of rectangles)" is the best name I could come * up with for the concept I had in mind. Basically, for a given region, I * want a set of rectangles with the property that a window is contained in * the region if and only if it is contained within at least one of the * rectangles. * * The GList* returned will be a list of (allocated) MetaRectangles. * The list will need to be freed by calling * meta_rectangle_free_spanning_set() on it (or by manually * implementing that function...) */ GList* meta_rectangle_get_minimal_spanning_set_for_region ( const MetaRectangle *basic_rect, const GSList *all_struts) { /* NOTE FOR OPTIMIZERS: This function *might* be somewhat slow, * especially due to the call to merge_spanning_rects_in_region() (which * is O(n^2) where n is the size of the list generated in this function). * This is made more onerous due to the fact that it involves a fair * number of memory allocation and deallocation calls. However, n is 1 * for default installations of Mate (because partial struts aren't used * by default and only partial struts increase the size of the spanning * set generated). With one partial strut, n will be 2 or 3. With 2 * partial struts, n will probably be 4 or 5. So, n probably isn't large * enough to make this worth bothering. Further, it is only called from * workspace.c:ensure_work_areas_validated (at least as of the time of * writing this comment), which in turn should only be called if the * strut list changes or the screen or xinerama size changes. If it ever * does show up on profiles (most likely because people start using * ridiculously huge numbers of partial struts), possible optimizations * include: * * (1) rewrite merge_spanning_rects_in_region() to be O(n) or O(nlogn). * I'm not totally sure it's possible, but with a couple copies of * the list and sorting them appropriately, I believe it might be. * (2) only call merge_spanning_rects_in_region() with a subset of the * full list of rectangles. I believe from some of my preliminary * debugging and thinking about it that it is possible to figure out * apriori groups of rectangles which are only merge candidates with * each other. (See testboxes.c:get_screen_region() when which==2 * and track the steps of this function carefully to see what gave * me the hint that this might work) * (3) figure out how to avoid merge_spanning_rects_in_region(). I think * it might be possible to modify this function to make that * possible, and I spent just a little while thinking about it, but n * wasn't large enough to convince me to care yet. * (4) Some of the stuff Rob mentioned at http://mail.gnome.org/archives\ * /marco-devel-list/2005-November/msg00028.html. (Sorry for the * URL splitting.) */ GList *ret; GList *tmp_list; const GSList *strut_iter; MetaRectangle *temp_rect; /* The algorithm is basically as follows: * Initialize rectangle_set to basic_rect * Foreach strut: * Foreach rectangle in rectangle_set: * - Split the rectangle into new rectangles that don't overlap the * strut (but which are as big as possible otherwise) * - Remove the old (pre-split) rectangle from the rectangle_set, * and replace it with the new rectangles generated from the * splitting */ temp_rect = g_new (MetaRectangle, 1); *temp_rect = *basic_rect; ret = g_list_prepend (NULL, temp_rect); for (strut_iter = all_struts; strut_iter; strut_iter = strut_iter->next) { GList *rect_iter; MetaRectangle *strut_rect = &((MetaStrut*)strut_iter->data)->rect; tmp_list = ret; ret = NULL; rect_iter = tmp_list; while (rect_iter) { MetaRectangle *rect = (MetaRectangle*) rect_iter->data; if (!meta_rectangle_overlap (rect, strut_rect)) ret = g_list_prepend (ret, rect); else { /* If there is area in rect left of strut */ if (BOX_LEFT (*rect) < BOX_LEFT (*strut_rect)) { temp_rect = g_new (MetaRectangle, 1); *temp_rect = *rect; temp_rect->width = BOX_LEFT (*strut_rect) - BOX_LEFT (*rect); ret = g_list_prepend (ret, temp_rect); } /* If there is area in rect right of strut */ if (BOX_RIGHT (*rect) > BOX_RIGHT (*strut_rect)) { int new_x; temp_rect = g_new (MetaRectangle, 1); *temp_rect = *rect; new_x = BOX_RIGHT (*strut_rect); temp_rect->width = BOX_RIGHT(*rect) - new_x; temp_rect->x = new_x; ret = g_list_prepend (ret, temp_rect); } /* If there is area in rect above strut */ if (BOX_TOP (*rect) < BOX_TOP (*strut_rect)) { temp_rect = g_new (MetaRectangle, 1); *temp_rect = *rect; temp_rect->height = BOX_TOP (*strut_rect) - BOX_TOP (*rect); ret = g_list_prepend (ret, temp_rect); } /* If there is area in rect below strut */ if (BOX_BOTTOM (*rect) > BOX_BOTTOM (*strut_rect)) { int new_y; temp_rect = g_new (MetaRectangle, 1); *temp_rect = *rect; new_y = BOX_BOTTOM (*strut_rect); temp_rect->height = BOX_BOTTOM (*rect) - new_y; temp_rect->y = new_y; ret = g_list_prepend (ret, temp_rect); } g_free (rect); } rect_iter = rect_iter->next; } g_list_free (tmp_list); } /* Sort by maximal area, just because I feel like it... */ ret = g_list_sort (ret, compare_rect_areas); /* Merge rectangles if possible so that the list really is minimal */ ret = merge_spanning_rects_in_region (ret); return ret; } GList* meta_rectangle_expand_region (GList *region, const int left_expand, const int right_expand, const int top_expand, const int bottom_expand) { return meta_rectangle_expand_region_conditionally (region, left_expand, right_expand, top_expand, bottom_expand, 0, 0); } GList* meta_rectangle_expand_region_conditionally (GList *region, const int left_expand, const int right_expand, const int top_expand, const int bottom_expand, const int min_x, const int min_y) { GList *tmp_list = region; while (tmp_list) { MetaRectangle *rect = (MetaRectangle*) tmp_list->data; if (rect->width >= min_x) { rect->x -= left_expand; rect->width += (left_expand + right_expand); } if (rect->height >= min_y) { rect->y -= top_expand; rect->height += (top_expand + bottom_expand); } tmp_list = tmp_list->next; } return region; } void meta_rectangle_expand_to_avoiding_struts (MetaRectangle *rect, const MetaRectangle *expand_to, const MetaDirection direction, const GSList *all_struts) { const GSList *strut_iter; /* If someone wants this function to handle more fine-grained * direction expanding in the future (e.g. only left, or fully * horizontal plus upward), feel free. But I'm hard-coding for both * horizontal directions (exclusive-)or both vertical directions. */ g_assert ((direction == META_DIRECTION_HORIZONTAL) ^ (direction == META_DIRECTION_VERTICAL )); if (direction == META_DIRECTION_HORIZONTAL) { rect->x = expand_to->x; rect->width = expand_to->width; } else { rect->y = expand_to->y; rect->height = expand_to->height; } /* Run over all struts */ for (strut_iter = all_struts; strut_iter; strut_iter = strut_iter->next) { MetaStrut *strut = (MetaStrut*) strut_iter->data; /* Skip struts that don't overlap */ if (!meta_rectangle_overlap (&strut->rect, rect)) continue; if (direction == META_DIRECTION_HORIZONTAL) { if (strut->side == META_SIDE_LEFT) { int offset = BOX_RIGHT(strut->rect) - BOX_LEFT(*rect); rect->x += offset; rect->width -= offset; } else if (strut->side == META_SIDE_RIGHT) { int offset = BOX_RIGHT (*rect) - BOX_LEFT(strut->rect); rect->width -= offset; } /* else ignore the strut */ } else /* direction == META_DIRECTION_VERTICAL */ { if (strut->side == META_SIDE_TOP) { int offset = BOX_BOTTOM(strut->rect) - BOX_TOP(*rect); rect->y += offset; rect->height -= offset; } else if (strut->side == META_SIDE_BOTTOM) { int offset = BOX_BOTTOM(*rect) - BOX_TOP(strut->rect); rect->height -= offset; } /* else ignore the strut */ } } /* end loop over struts */ } /* end meta_rectangle_expand_to_avoiding_struts */ void meta_rectangle_free_list_and_elements (GList *filled_list) { g_list_foreach (filled_list, (void (*)(gpointer,gpointer))&g_free, /* ew, for ugly */ NULL); g_list_free (filled_list); } gboolean meta_rectangle_could_fit_in_region (const GList *spanning_rects, const MetaRectangle *rect) { const GList *temp; gboolean could_fit; temp = spanning_rects; could_fit = FALSE; while (!could_fit && temp != NULL) { could_fit = could_fit || meta_rectangle_could_fit_rect (temp->data, rect); temp = temp->next; } return could_fit; } gboolean meta_rectangle_contained_in_region (const GList *spanning_rects, const MetaRectangle *rect) { const GList *temp; gboolean contained; temp = spanning_rects; contained = FALSE; while (!contained && temp != NULL) { contained = contained || meta_rectangle_contains_rect (temp->data, rect); temp = temp->next; } return contained; } gboolean meta_rectangle_overlaps_with_region (const GList *spanning_rects, const MetaRectangle *rect) { const GList *temp; gboolean overlaps; temp = spanning_rects; overlaps = FALSE; while (!overlaps && temp != NULL) { overlaps = overlaps || meta_rectangle_overlap (temp->data, rect); temp = temp->next; } return overlaps; } void meta_rectangle_clamp_to_fit_into_region (const GList *spanning_rects, FixedDirections fixed_directions, MetaRectangle *rect, const MetaRectangle *min_size) { const GList *temp; const MetaRectangle *best_rect = NULL; int best_overlap = 0; /* First, find best rectangle from spanning_rects to which we can clamp * rect to fit into. */ for (temp = spanning_rects; temp; temp = temp->next) { MetaRectangle *compare_rect = temp->data; int maximal_overlap_amount_for_compare; /* If x is fixed and the entire width of rect doesn't fit in compare, * skip this rectangle. */ if ((fixed_directions & FIXED_DIRECTION_X) && (compare_rect->x > rect->x || compare_rect->x + compare_rect->width < rect->x + rect->width)) continue; /* If y is fixed and the entire height of rect doesn't fit in compare, * skip this rectangle. */ if ((fixed_directions & FIXED_DIRECTION_Y) && (compare_rect->y > rect->y || compare_rect->y + compare_rect->height < rect->y + rect->height)) continue; /* If compare can't hold the min_size window, skip this rectangle. */ if (compare_rect->width < min_size->width || compare_rect->height < min_size->height) continue; /* Determine maximal overlap amount */ maximal_overlap_amount_for_compare = MIN (rect->width, compare_rect->width) * MIN (rect->height, compare_rect->height); /* See if this is the best rect so far */ if (maximal_overlap_amount_for_compare > best_overlap) { best_rect = compare_rect; best_overlap = maximal_overlap_amount_for_compare; } } /* Clamp rect appropriately */ if (best_rect == NULL) { meta_warning ("No rect whose size to clamp to found!\n"); /* If it doesn't fit, at least make it no bigger than it has to be */ if (!(fixed_directions & FIXED_DIRECTION_X)) rect->width = min_size->width; if (!(fixed_directions & FIXED_DIRECTION_Y)) rect->height = min_size->height; } else { rect->width = MIN (rect->width, best_rect->width); rect->height = MIN (rect->height, best_rect->height); } } void meta_rectangle_clip_to_region (const GList *spanning_rects, FixedDirections fixed_directions, MetaRectangle *rect) { const GList *temp; const MetaRectangle *best_rect = NULL; int best_overlap = 0; /* First, find best rectangle from spanning_rects to which we will clip * rect into. */ for (temp = spanning_rects; temp; temp = temp->next) { MetaRectangle *compare_rect = temp->data; MetaRectangle overlap; int maximal_overlap_amount_for_compare; /* If x is fixed and the entire width of rect doesn't fit in compare, * skip the rectangle. */ if ((fixed_directions & FIXED_DIRECTION_X) && (compare_rect->x > rect->x || compare_rect->x + compare_rect->width < rect->x + rect->width)) continue; /* If y is fixed and the entire height of rect doesn't fit in compare, * skip the rectangle. */ if ((fixed_directions & FIXED_DIRECTION_Y) && (compare_rect->y > rect->y || compare_rect->y + compare_rect->height < rect->y + rect->height)) continue; /* Determine maximal overlap amount */ meta_rectangle_intersect (rect, compare_rect, &overlap); maximal_overlap_amount_for_compare = meta_rectangle_area (&overlap); /* See if this is the best rect so far */ if (maximal_overlap_amount_for_compare > best_overlap) { best_rect = compare_rect; best_overlap = maximal_overlap_amount_for_compare; } } /* Clip rect appropriately */ if (best_rect == NULL) meta_warning ("No rect to clip to found!\n"); else { /* Extra precaution with checking fixed direction shouldn't be needed * due to logic above, but it shouldn't hurt either. */ if (!(fixed_directions & FIXED_DIRECTION_X)) { /* Find the new left and right */ int new_x = MAX (rect->x, best_rect->x); rect->width = MIN ((rect->x + rect->width) - new_x, (best_rect->x + best_rect->width) - new_x); rect->x = new_x; } /* Extra precaution with checking fixed direction shouldn't be needed * due to logic above, but it shouldn't hurt either. */ if (!(fixed_directions & FIXED_DIRECTION_Y)) { /* Clip the top, if needed */ int new_y = MAX (rect->y, best_rect->y); rect->height = MIN ((rect->y + rect->height) - new_y, (best_rect->y + best_rect->height) - new_y); rect->y = new_y; } } } void meta_rectangle_shove_into_region (const GList *spanning_rects, FixedDirections fixed_directions, MetaRectangle *rect) { const GList *temp; const MetaRectangle *best_rect = NULL; int best_overlap = 0; int shortest_distance = G_MAXINT; /* First, find best rectangle from spanning_rects to which we will shove * rect into. */ for (temp = spanning_rects; temp; temp = temp->next) { MetaRectangle *compare_rect = temp->data; int maximal_overlap_amount_for_compare; int dist_to_compare; /* If x is fixed and the entire width of rect doesn't fit in compare, * skip this rectangle. */ if ((fixed_directions & FIXED_DIRECTION_X) && (compare_rect->x > rect->x || compare_rect->x + compare_rect->width < rect->x + rect->width)) continue; /* If y is fixed and the entire height of rect doesn't fit in compare, * skip this rectangle. */ if ((fixed_directions & FIXED_DIRECTION_Y) && (compare_rect->y > rect->y || compare_rect->y + compare_rect->height < rect->y + rect->height)) continue; /* Determine maximal overlap amount between rect & compare_rect */ maximal_overlap_amount_for_compare = MIN (rect->width, compare_rect->width) * MIN (rect->height, compare_rect->height); /* Determine distance necessary to put rect into compare_rect */ dist_to_compare = 0; if (compare_rect->x > rect->x) dist_to_compare += compare_rect->x - rect->x; if (compare_rect->x + compare_rect->width < rect->x + rect->width) dist_to_compare += (rect->x + rect->width) - (compare_rect->x + compare_rect->width); if (compare_rect->y > rect->y) dist_to_compare += compare_rect->y - rect->y; if (compare_rect->y + compare_rect->height < rect->y + rect->height) dist_to_compare += (rect->y + rect->height) - (compare_rect->y + compare_rect->height); /* See if this is the best rect so far */ if ((maximal_overlap_amount_for_compare > best_overlap) || (maximal_overlap_amount_for_compare == best_overlap && dist_to_compare < shortest_distance)) { best_rect = compare_rect; best_overlap = maximal_overlap_amount_for_compare; shortest_distance = dist_to_compare; } } /* Shove rect appropriately */ if (best_rect == NULL) meta_warning ("No rect to shove into found!\n"); else { /* Extra precaution with checking fixed direction shouldn't be needed * due to logic above, but it shouldn't hurt either. */ if (!(fixed_directions & FIXED_DIRECTION_X)) { /* Shove to the right, if needed */ if (best_rect->x > rect->x) rect->x = best_rect->x; /* Shove to the left, if needed */ if (best_rect->x + best_rect->width < rect->x + rect->width) rect->x = (best_rect->x + best_rect->width) - rect->width; } /* Extra precaution with checking fixed direction shouldn't be needed * due to logic above, but it shouldn't hurt either. */ if (!(fixed_directions & FIXED_DIRECTION_Y)) { /* Shove down, if needed */ if (best_rect->y > rect->y) rect->y = best_rect->y; /* Shove up, if needed */ if (best_rect->y + best_rect->height < rect->y + rect->height) rect->y = (best_rect->y + best_rect->height) - rect->height; } } } void meta_rectangle_find_linepoint_closest_to_point (double x1, double y1, double x2, double y2, double px, double py, double *valx, double *valy) { /* I'll use the shorthand rx, ry for the return values, valx & valy. * Now, we need (rx,ry) to be on the line between (x1,y1) and (x2,y2). * For that to happen, we first need the slope of the line from (x1,y1) * to (rx,ry) must match the slope of (x1,y1) to (x2,y2), i.e.: * (ry-y1) (y2-y1) * ------- = ------- * (rx-x1) (x2-x1) * If x1==x2, though, this gives divide by zero errors, so we want to * rewrite the equation by multiplying both sides by (rx-x1)*(x2-x1): * (ry-y1)(x2-x1) = (y2-y1)(rx-x1) * This is a valid requirement even when x1==x2 (when x1==x2, this latter * equation will basically just mean that rx must be equal to both x1 and * x2) * * The other requirement that we have is that the line from (rx,ry) to * (px,py) must be perpendicular to the line from (x1,y1) to (x2,y2). So * we just need to get a vector in the direction of each line, take the * dot product of the two, and ensure that the result is 0: * (rx-px)*(x2-x1) + (ry-py)*(y2-y1) = 0. * * This gives us two equations and two unknowns: * * (ry-y1)(x2-x1) = (y2-y1)(rx-x1) * (rx-px)*(x2-x1) + (ry-py)*(y2-y1) = 0. * * This particular pair of equations is always solvable so long as * (x1,y1) and (x2,y2) are not the same point (and note that anyone who * calls this function that way is braindead because it means that they * really didn't specify a line after all). However, the caller should * be careful to avoid making (x1,y1) and (x2,y2) too close (e.g. like * 10^{-8} apart in each coordinate), otherwise roundoff error could * cause issues. Solving these equations by hand (or using Maple(TM) or * Mathematica(TM) or whatever) results in slightly messy expressions, * but that's all the below few lines do. */ double diffx, diffy, den; diffx = x2 - x1; diffy = y2 - y1; den = diffx * diffx + diffy * diffy; *valx = (py * diffx * diffy + px * diffx * diffx + y2 * x1 * diffy - y1 * x2 * diffy) / den; *valy = (px * diffx * diffy + py * diffy * diffy + x2 * y1 * diffx - x1 * y2 * diffx) / den; } /***************************************************************************/ /* */ /* Switching gears to code for edges instead of just rectangles */ /* */ /***************************************************************************/ gboolean meta_rectangle_edge_aligns (const MetaRectangle *rect, const MetaEdge *edge) { /* The reason for the usage of <= below instead of < is because we are * interested in in-the-way-or-adject'ness. So, a left (i.e. vertical * edge) occupying y positions 0-9 (which has a y of 0 and a height of * 10) and a rectangle with top at y=10 would be considered to "align" by * this function. */ switch (edge->side_type) { case META_SIDE_LEFT: case META_SIDE_RIGHT: return BOX_TOP (*rect) <= BOX_BOTTOM (edge->rect) && BOX_TOP (edge->rect) <= BOX_BOTTOM (*rect); case META_SIDE_TOP: case META_SIDE_BOTTOM: return BOX_LEFT (*rect) <= BOX_RIGHT (edge->rect) && BOX_LEFT (edge->rect) <= BOX_RIGHT (*rect); default: g_assert_not_reached (); } } static GList* get_rect_minus_overlap (const GList *rect_in_list, MetaRectangle *overlap) { MetaRectangle *temp; MetaRectangle *rect = rect_in_list->data; GList *ret = NULL; if (BOX_LEFT (*rect) < BOX_LEFT (*overlap)) { temp = g_new (MetaRectangle, 1); *temp = *rect; temp->width = BOX_LEFT (*overlap) - BOX_LEFT (*rect); ret = g_list_prepend (ret, temp); } if (BOX_RIGHT (*rect) > BOX_RIGHT (*overlap)) { temp = g_new (MetaRectangle, 1); *temp = *rect; temp->x = BOX_RIGHT (*overlap); temp->width = BOX_RIGHT (*rect) - BOX_RIGHT (*overlap); ret = g_list_prepend (ret, temp); } if (BOX_TOP (*rect) < BOX_TOP (*overlap)) { temp = g_new (MetaRectangle, 1); temp->x = overlap->x; temp->width = overlap->width; temp->y = BOX_TOP (*rect); temp->height = BOX_TOP (*overlap) - BOX_TOP (*rect); ret = g_list_prepend (ret, temp); } if (BOX_BOTTOM (*rect) > BOX_BOTTOM (*overlap)) { temp = g_new (MetaRectangle, 1); temp->x = overlap->x; temp->width = overlap->width; temp->y = BOX_BOTTOM (*overlap); temp->height = BOX_BOTTOM (*rect) - BOX_BOTTOM (*overlap); ret = g_list_prepend (ret, temp); } return ret; } static GList* replace_rect_with_list (GList *old_element, GList *new_list) { GList *ret; g_assert (old_element != NULL); if (!new_list) { /* If there is no new list, just remove the old_element */ ret = g_list_remove_link (old_element, old_element); } else { /* Fix up the prev and next pointers everywhere */ ret = new_list; if (old_element->prev) { old_element->prev->next = new_list; new_list->prev = old_element->prev; } if (old_element->next) { GList *tmp = g_list_last (new_list); old_element->next->prev = tmp; tmp->next = old_element->next; } } /* Free the old_element and return the appropriate "next" point */ g_free (old_element->data); g_list_free_1 (old_element); return ret; } /* Make a copy of the strut list, make sure that copy only contains parts * of the old_struts that intersect with the region rect, and then do some * magic to make all the new struts disjoint (okay, we we break up struts * that aren't disjoint in a way that the overlapping part is only included * once, so it's not really magic...). */ static GList* get_disjoint_strut_rect_list_in_region (const GSList *old_struts, const MetaRectangle *region) { GList *strut_rects; GList *tmp; /* First, copy the list */ strut_rects = NULL; while (old_struts) { MetaRectangle *cur = &((MetaStrut*)old_struts->data)->rect; MetaRectangle *copy = g_new (MetaRectangle, 1); *copy = *cur; if (meta_rectangle_intersect (copy, region, copy)) strut_rects = g_list_prepend (strut_rects, copy); else g_free (copy); old_struts = old_struts->next; } /* Now, loop over the list and check for intersections, fixing things up * where they do intersect. */ tmp = strut_rects; while (tmp) { GList *compare; MetaRectangle *cur = tmp->data; compare = tmp->next; while (compare) { MetaRectangle *comp = compare->data; MetaRectangle overlap; if (meta_rectangle_intersect (cur, comp, &overlap)) { /* Get a list of rectangles for each strut that don't overlap * the intersection region. */ GList *cur_leftover = get_rect_minus_overlap (tmp, &overlap); GList *comp_leftover = get_rect_minus_overlap (compare, &overlap); /* Add the intersection region to cur_leftover */ MetaRectangle *overlap_allocated = g_new (MetaRectangle, 1); *overlap_allocated = overlap; cur_leftover = g_list_prepend (cur_leftover, overlap_allocated); /* Fix up tmp, compare, and cur -- maybe struts too */ if (strut_rects == tmp) { strut_rects = replace_rect_with_list (tmp, cur_leftover); tmp = strut_rects; } else tmp = replace_rect_with_list (tmp, cur_leftover); compare = replace_rect_with_list (compare, comp_leftover); if (compare == NULL) break; cur = tmp->data; } compare = compare->next; } tmp = tmp->next; } return strut_rects; } gint meta_rectangle_edge_cmp_ignore_type (gconstpointer a, gconstpointer b) { const MetaEdge *a_edge_rect = (gconstpointer) a; const MetaEdge *b_edge_rect = (gconstpointer) b; int a_compare, b_compare; /* Edges must be both vertical or both horizontal, or it doesn't make * sense to compare them. */ g_assert ((a_edge_rect->rect.width == 0 && b_edge_rect->rect.width == 0) || (a_edge_rect->rect.height == 0 && b_edge_rect->rect.height == 0)); a_compare = b_compare = 0; /* gcc-3.4.2 sucks at figuring initialized'ness */ if (a_edge_rect->side_type == META_SIDE_LEFT || a_edge_rect->side_type == META_SIDE_RIGHT) { a_compare = a_edge_rect->rect.x; b_compare = b_edge_rect->rect.x; if (a_compare == b_compare) { a_compare = a_edge_rect->rect.y; b_compare = b_edge_rect->rect.y; } } else if (a_edge_rect->side_type == META_SIDE_TOP || a_edge_rect->side_type == META_SIDE_BOTTOM) { a_compare = a_edge_rect->rect.y; b_compare = b_edge_rect->rect.y; if (a_compare == b_compare) { a_compare = a_edge_rect->rect.x; b_compare = b_edge_rect->rect.x; } } else g_assert ("Some idiot wanted to sort sides of different types.\n"); return a_compare - b_compare; /* positive value denotes a > b ... */ } /* To make things easily testable, provide a nice way of sorting edges */ gint meta_rectangle_edge_cmp (gconstpointer a, gconstpointer b) { const MetaEdge *a_edge_rect = (gconstpointer) a; const MetaEdge *b_edge_rect = (gconstpointer) b; int a_compare, b_compare; a_compare = a_edge_rect->side_type; b_compare = b_edge_rect->side_type; if (a_compare == b_compare) return meta_rectangle_edge_cmp_ignore_type (a, b); return a_compare - b_compare; /* positive value denotes a > b ... */ } /* Determine whether two given edges overlap */ static gboolean edges_overlap (const MetaEdge *edge1, const MetaEdge *edge2) { if (edge1->rect.width == 0 && edge2->rect.width == 0) { return meta_rectangle_vert_overlap (&edge1->rect, &edge2->rect) && edge1->rect.x == edge2->rect.x; } else if (edge1->rect.height == 0 && edge2->rect.height == 0) { return meta_rectangle_horiz_overlap (&edge1->rect, &edge2->rect) && edge1->rect.y == edge2->rect.y; } else { return FALSE; } } static gboolean rectangle_and_edge_intersection (const MetaRectangle *rect, const MetaEdge *edge, MetaEdge *overlap, int *handle_type) { const MetaRectangle *rect2 = &edge->rect; MetaRectangle *result = &overlap->rect; gboolean intersect = TRUE; /* We don't know how to set these, so set them to invalid values */ overlap->edge_type = -1; overlap->side_type = -1; /* Figure out what the intersection is */ result->x = MAX (rect->x, rect2->x); result->y = MAX (rect->y, rect2->y); result->width = MIN (BOX_RIGHT (*rect), BOX_RIGHT (*rect2)) - result->x; result->height = MIN (BOX_BOTTOM (*rect), BOX_BOTTOM (*rect2)) - result->y; /* Find out if the intersection is empty; have to do it this way since * edges have a thickness of 0 */ if ((result->width < 0 || result->height < 0) || (result->width == 0 && result->height == 0)) { result->width = 0; result->height = 0; intersect = FALSE; } else { /* Need to figure out the handle_type, a somewhat weird quantity: * 0 - overlap is in middle of rect * -1 - overlap is at the side of rect, and is on the opposite side * of rect than the edge->side_type side * 1 - overlap is at the side of rect, and the side of rect it is * on is the edge->side_type side */ switch (edge->side_type) { case META_SIDE_LEFT: if (result->x == rect->x) *handle_type = 1; else if (result->x == BOX_RIGHT (*rect)) *handle_type = -1; else *handle_type = 0; break; case META_SIDE_RIGHT: if (result->x == rect->x) *handle_type = -1; else if (result->x == BOX_RIGHT (*rect)) *handle_type = 1; else *handle_type = 0; break; case META_SIDE_TOP: if (result->y == rect->y) *handle_type = 1; else if (result->y == BOX_BOTTOM (*rect)) *handle_type = -1; else *handle_type = 0; break; case META_SIDE_BOTTOM: if (result->y == rect->y) *handle_type = -1; else if (result->y == BOX_BOTTOM (*rect)) *handle_type = 1; else *handle_type = 0; break; default: g_assert_not_reached (); } } return intersect; } /* Add all edges of the given rect to cur_edges and return the result. If * rect_is_internal is false, the side types are switched (LEFT<->RIGHT and * TOP<->BOTTOM). */ static GList* add_edges (GList *cur_edges, const MetaRectangle *rect, gboolean rect_is_internal) { MetaEdge *temp_edge; int i; for (i=0; i<4; i++) { temp_edge = g_new (MetaEdge, 1); temp_edge->rect = *rect; switch (i) { case 0: temp_edge->side_type = rect_is_internal ? META_SIDE_LEFT : META_SIDE_RIGHT; temp_edge->rect.width = 0; break; case 1: temp_edge->side_type = rect_is_internal ? META_SIDE_RIGHT : META_SIDE_LEFT; temp_edge->rect.x += temp_edge->rect.width; temp_edge->rect.width = 0; break; case 2: temp_edge->side_type = rect_is_internal ? META_SIDE_TOP : META_SIDE_BOTTOM; temp_edge->rect.height = 0; break; case 3: temp_edge->side_type = rect_is_internal ? META_SIDE_BOTTOM : META_SIDE_TOP; temp_edge->rect.y += temp_edge->rect.height; temp_edge->rect.height = 0; break; } temp_edge->edge_type = META_EDGE_SCREEN; cur_edges = g_list_prepend (cur_edges, temp_edge); } return cur_edges; } /* Remove any part of old_edge that intersects remove and add any resulting * edges to cur_list. Return cur_list when finished. */ static GList* split_edge (GList *cur_list, const MetaEdge *old_edge, const MetaEdge *remove) { MetaEdge *temp_edge; switch (old_edge->side_type) { case META_SIDE_LEFT: case META_SIDE_RIGHT: g_assert (meta_rectangle_vert_overlap (&old_edge->rect, &remove->rect)); if (BOX_TOP (old_edge->rect) < BOX_TOP (remove->rect)) { temp_edge = g_new (MetaEdge, 1); *temp_edge = *old_edge; temp_edge->rect.height = BOX_TOP (remove->rect) - BOX_TOP (old_edge->rect); cur_list = g_list_prepend (cur_list, temp_edge); } if (BOX_BOTTOM (old_edge->rect) > BOX_BOTTOM (remove->rect)) { temp_edge = g_new (MetaEdge, 1); *temp_edge = *old_edge; temp_edge->rect.y = BOX_BOTTOM (remove->rect); temp_edge->rect.height = BOX_BOTTOM (old_edge->rect) - BOX_BOTTOM (remove->rect); cur_list = g_list_prepend (cur_list, temp_edge); } break; case META_SIDE_TOP: case META_SIDE_BOTTOM: g_assert (meta_rectangle_horiz_overlap (&old_edge->rect, &remove->rect)); if (BOX_LEFT (old_edge->rect) < BOX_LEFT (remove->rect)) { temp_edge = g_new (MetaEdge, 1); *temp_edge = *old_edge; temp_edge->rect.width = BOX_LEFT (remove->rect) - BOX_LEFT (old_edge->rect); cur_list = g_list_prepend (cur_list, temp_edge); } if (BOX_RIGHT (old_edge->rect) > BOX_RIGHT (remove->rect)) { temp_edge = g_new (MetaEdge, 1); *temp_edge = *old_edge; temp_edge->rect.x = BOX_RIGHT (remove->rect); temp_edge->rect.width = BOX_RIGHT (old_edge->rect) - BOX_RIGHT (remove->rect); cur_list = g_list_prepend (cur_list, temp_edge); } break; default: g_assert_not_reached (); } return cur_list; } /* Split up edge and remove preliminary edges from strut_edges depending on * if and how rect and edge intersect. */ static void fix_up_edges (MetaRectangle *rect, MetaEdge *edge, GList **strut_edges, GList **edge_splits, gboolean *edge_needs_removal) { MetaEdge overlap; int handle_type; if (!rectangle_and_edge_intersection (rect, edge, &overlap, &handle_type)) return; if (handle_type == 0 || handle_type == 1) { /* Put the result of removing overlap from edge into edge_splits */ *edge_splits = split_edge (*edge_splits, edge, &overlap); *edge_needs_removal = TRUE; } if (handle_type == -1 || handle_type == 1) { /* Remove the overlap from strut_edges */ /* First, loop over the edges of the strut */ GList *tmp = *strut_edges; while (tmp) { MetaEdge *cur = tmp->data; /* If this is the edge that overlaps, then we need to split it */ if (edges_overlap (cur, &overlap)) { GList *delete_me = tmp; /* Split this edge into some new ones */ *strut_edges = split_edge (*strut_edges, cur, &overlap); /* Delete the old one */ tmp = tmp->next; g_free (cur); *strut_edges = g_list_delete_link (*strut_edges, delete_me); } else tmp = tmp->next; } } } /* This function removes intersections of edges with the rectangles from the * list of edges. */ GList* meta_rectangle_remove_intersections_with_boxes_from_edges ( GList *edges, const GSList *rectangles) { const GSList *rect_iter; const int opposing = 1; /* Now remove all intersections of rectangles with the edge list */ rect_iter = rectangles; while (rect_iter) { MetaRectangle *rect = rect_iter->data; GList *edge_iter = edges; while (edge_iter) { MetaEdge *edge = edge_iter->data; MetaEdge overlap; int handle; gboolean edge_iter_advanced = FALSE; /* If this edge overlaps with this rect... */ if (rectangle_and_edge_intersection (rect, edge, &overlap, &handle)) { /* "Intersections" where the edges touch but are opposite * sides (e.g. a left edge against the right edge) should not * be split. Note that the comments in * rectangle_and_edge_intersection() say that opposing edges * occur when handle is -1, BUT you need to remember that we * treat the left side of a window as a right edge because * it's what the right side of the window being moved should * be-resisted-by/snap-to. So opposing is really 1. Anyway, * we just keep track of it in the opposing constant set up * above and if handle isn't equal to that, then we know the * edge should be split. */ if (handle != opposing) { /* Keep track of this edge so we can delete it below */ GList *delete_me = edge_iter; edge_iter = edge_iter->next; edge_iter_advanced = TRUE; /* Split the edge and add the result to beginning of edges */ edges = split_edge (edges, edge, &overlap); /* Now free the edge... */ g_free (edge); edges = g_list_delete_link (edges, delete_me); } } if (!edge_iter_advanced) edge_iter = edge_iter->next; } rect_iter = rect_iter->next; } return edges; } /* This function is trying to find all the edges of an onscreen region. */ GList* meta_rectangle_find_onscreen_edges (const MetaRectangle *basic_rect, const GSList *all_struts) { GList *ret; GList *fixed_strut_rects; GList *edge_iter; const GList *strut_rect_iter; /* The algorithm is basically as follows: * Make sure the struts are disjoint * Initialize the edge_set to the edges of basic_rect * Foreach strut: * Put together a preliminary new edge from the edges of the strut * Foreach edge in edge_set: * - Split the edge if it is partially contained inside the strut * - If the edge matches an edge of the strut (i.e. a strut just * against the edge of the screen or a not-next-to-edge-of-screen * strut adjacent to another), then both the edge from the * edge_set and the preliminary edge for the strut will need to * be split * Add any remaining "preliminary" strut edges to the edge_set */ /* Make sure the struts are disjoint */ fixed_strut_rects = get_disjoint_strut_rect_list_in_region (all_struts, basic_rect); /* Start off the list with the edges of basic_rect */ ret = add_edges (NULL, basic_rect, TRUE); strut_rect_iter = fixed_strut_rects; while (strut_rect_iter) { MetaRectangle *strut_rect = (MetaRectangle*) strut_rect_iter->data; /* Get the new possible edges we may need to add from the strut */ GList *new_strut_edges = add_edges (NULL, strut_rect, FALSE); edge_iter = ret; while (edge_iter) { MetaEdge *cur_edge = edge_iter->data; GList *splits_of_cur_edge = NULL; gboolean edge_needs_removal = FALSE; fix_up_edges (strut_rect, cur_edge, &new_strut_edges, &splits_of_cur_edge, &edge_needs_removal); if (edge_needs_removal) { /* Delete the old edge */ GList *delete_me = edge_iter; edge_iter = edge_iter->next; g_free (cur_edge); ret = g_list_delete_link (ret, delete_me); /* Add the new split parts of the edge */ ret = g_list_concat (splits_of_cur_edge, ret); } else { edge_iter = edge_iter->next; } /* edge_iter was already advanced above */ } ret = g_list_concat (new_strut_edges, ret); strut_rect_iter = strut_rect_iter->next; } /* Sort the list */ ret = g_list_sort (ret, meta_rectangle_edge_cmp); /* Free the fixed struts list */ meta_rectangle_free_list_and_elements (fixed_strut_rects); return ret; } GList* meta_rectangle_find_nonintersected_xinerama_edges ( const MetaRectangle *screen_rect, const GList *xinerama_rects, const GSList *all_struts) { /* This function cannot easily be merged with * meta_rectangle_find_onscreen_edges() because real screen edges * and strut edges both are of the type "there ain't anything * immediately on the other side"; xinerama edges are different. */ GList *ret; const GList *cur; GSList *temp_rects; /* Initialize the return list to be empty */ ret = NULL; /* start of ret with all the edges of xineramas that are adjacent to * another xinerama. */ cur = xinerama_rects; while (cur) { MetaRectangle *cur_rect = cur->data; MetaEdge *new_edge; if (BOX_LEFT(*cur_rect) != BOX_LEFT(*screen_rect)) { new_edge = g_new (MetaEdge, 1); new_edge->rect = meta_rect (BOX_LEFT (*cur_rect), BOX_TOP (*cur_rect), 0, cur_rect->height); new_edge->side_type = META_SIDE_LEFT; new_edge->edge_type = META_EDGE_XINERAMA; ret = g_list_prepend (ret, new_edge); } if (BOX_RIGHT(*cur_rect) != BOX_RIGHT(*screen_rect)) { new_edge = g_new (MetaEdge, 1); new_edge->rect = meta_rect (BOX_RIGHT (*cur_rect), BOX_TOP (*cur_rect), 0, cur_rect->height); new_edge->side_type = META_SIDE_RIGHT; new_edge->edge_type = META_EDGE_XINERAMA; ret = g_list_prepend (ret, new_edge); } if (BOX_TOP(*cur_rect) != BOX_TOP(*screen_rect)) { new_edge = g_new (MetaEdge, 1); new_edge->rect = meta_rect (BOX_LEFT (*cur_rect), BOX_TOP (*cur_rect), cur_rect->width, 0); new_edge->side_type = META_SIDE_TOP; new_edge->edge_type = META_EDGE_XINERAMA; ret = g_list_prepend (ret, new_edge); } if (BOX_BOTTOM(*cur_rect) != BOX_BOTTOM(*screen_rect)) { new_edge = g_new (MetaEdge, 1); new_edge->rect = meta_rect (BOX_LEFT (*cur_rect), BOX_BOTTOM (*cur_rect), cur_rect->width, 0); new_edge->side_type = META_SIDE_BOTTOM; new_edge->edge_type = META_EDGE_XINERAMA; ret = g_list_prepend (ret, new_edge); } cur = cur->next; } temp_rects = NULL; for (; all_struts; all_struts = all_struts->next) temp_rects = g_slist_prepend (temp_rects, &((MetaStrut*)all_struts->data)->rect); ret = meta_rectangle_remove_intersections_with_boxes_from_edges (ret, temp_rects); g_slist_free (temp_rects); /* Sort the list */ ret = g_list_sort (ret, meta_rectangle_edge_cmp); return ret; }