msgid ""
msgstr ""
"Project-Id-Version: mate-calc-help\n"
"POT-Creation-Date: 2010-07-16 07:12+0000\n"
"PO-Revision-Date: 2010-07-16 18:25+0800\n"
"Last-Translator: YunQiang Su <wzssyqa@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Poedit-Language: Chinese\n"
"X-Poedit-Country: CHINA\n"

#: C/legal.xml:3(p)
msgid ""
"This work is licensed under a <link href=\"http://creativecommons.org/"
"licenses/by-sa/3.0/\">Creative Commons Attribution-Share Alike 3.0 Unported "
"License</link>."
msgstr ""
"本文采用 <link href=\"http://creativecommons.org/licenses/by-sa/3.0/\">知识共"
"享署名-相同方式共享 3.0 Unported 许可协议</link>。"

#: C/legal.xml:6(p)
msgid ""
"As a special exception, the copyright holders give you permission to copy, "
"modify, and distribute the example code contained in this document under the "
"terms of your choosing, without restriction."
msgstr ""
"作为一个特殊的例外，著作权人允许您使用自己的许可协议复制、修改和分发包含在本"
"文档中的范例代码，不受约束。"

#: C/variables.page:9(title)
msgid "Variables"
msgstr "变量"

#: C/variables.page:11(p)
msgid ""
"To assign a value to a variable use the = symbol or choose the variable to "
"assign to with the <gui>→R</gui> button in <link xref=\"mouse\">advanced "
"mode</link>. A variable name must only contain upper or lower characters."
msgstr ""
"要赋值给一个变量，请使用 = 或在 <link xref=\"mouse\">高级模式</link> 中，选择"
"一个变量用 <gui>→R</gui> 按钮赋值。变量名只能用大小写字母。"

#: C/variables.page:16(p)
msgid "x=5"
msgstr "x=5"

#: C/variables.page:19(p)
msgid "value=82"
msgstr "value=82"

#: C/variables.page:23(p)
msgid ""
"Variables can be used in any equation and are substituted for their assigned "
"value. Variables can be inserted using the <gui>←R</gui> button."
msgstr "变量可以用在等式中替代数值，变量可以用 <gui>←R</gui> 按钮插入。"

#: C/variables.page:28(p)
msgid "6x+3"
msgstr "6x+3"

#: C/variables.page:31(p)
msgid "xy−3x+7y−21"
msgstr "xy−3x+7y−21"

#: C/variables.page:35(p)
msgid "The following variables are always defined."
msgstr "下面的变量是预定义好的。"

#: C/variables.page:40(p)
msgid "ans"
msgstr "ans"

#: C/variables.page:41(p)
msgid "Result of previous calculation"
msgstr "上次运算结果"

#: C/variables.page:44(p)
msgid "e"
msgstr "e"

#: C/variables.page:45(link)
msgid "Euler's Number"
msgstr "欧拉数"

#: C/variables.page:48(p) C/keyboard.page:35(p)
msgid "π"
msgstr "π"

#: C/variables.page:49(link)
msgid "Pi"
msgstr "Pi"

#: C/variables.page:52(p)
msgid "rand"
msgstr "rand"

#: C/variables.page:53(p)
msgid "Random value in the range [0,1] (changes on each read)"
msgstr "在 [0,1] 之间的随机值(在每次读取时改变)"

#: C/trigonometry.page:9(title)
msgid "Trigonometry"
msgstr "三角函数"

#: C/trigonometry.page:11(p)
msgid ""
"Trigonometry can be performed using the sin, cos, and tan <link xref="
"\"function\">function</link>."
msgstr "三角函数可以执行 sin、cos 和 tan <link xref=\"function\">函数</link>。"

#: C/trigonometry.page:15(p)
msgid "sin 45"
msgstr "sin 45"

#: C/trigonometry.page:19(p)
msgid ""
"The angle units used can be changed from the <guiseq><gui>Calculator</"
"gui><gui>Preferences</gui></guiseq> menu. Trigonometry buttons are visible "
"when in <link xref=\"mouse\">scientific mode</link>."
msgstr ""
"角度单位可以在 <guiseq><gui>计算器</gui><gui>首选项</gui></guiseq> 菜单中更"
"改。当进入 <link xref=\"mouse\">科学模式</link> 时，三角函数按钮可见。"

#: C/trigonometry.page:23(p)
msgid ""
"Hyperbolic functions are available by adding \"h\" to the end of a function."
msgstr "在函数的最后添加“h”，则双曲线函数可用。"

#: C/trigonometry.page:27(p)
msgid "sinh 0.34"
msgstr "sinh 0.34"

#: C/trigonometry.page:31(p)
msgid ""
"Inverse functions are entered either using the inverse symbol ⁻¹ "
"(<keyseq><key>Ctrl</key><key>I</key></keyseq>) or the \"a\" form of the "
"function. The following two equations are equivalent."
msgstr ""
"反函数是将输入使用反函数符号 ⁻¹ (<keyseq><key>Ctrl</key><key>I</key></"
"keyseq>) 或在一个函数前面加“a”。下面两个式子是等价的。"

#: C/trigonometry.page:36(p)
msgid "sin⁻¹ 0.5"
msgstr "sin⁻¹ 0.5"

#: C/trigonometry.page:39(p)
msgid "asin 0.5"
msgstr "asin 0.5"

#: C/trigonometry.page:43(p)
msgid ""
"To enter <link xref=\"variable\">π</link> with the keyboard use "
"<keyseq><key>Ctrl</key><key>P</key></keyseq>."
msgstr ""
"要输入 <link xref=\"variable\">π</link>，按键盘组合键 <keyseq><key>Ctrl</"
"key><key>P</key></keyseq>。"

#. Place this at the end of the section
#: C/superscript.page:7(title)
msgid "_"
msgstr "_"

#: C/superscript.page:11(title)
msgid "Superscript and Subscript"
msgstr "上标和下标"

#: C/superscript.page:13(p)
msgid ""
"Some equations may require numbers to be entered in superscript or subscript "
"form. e.g."
msgstr "一些等式中可能需要输入带有上标和下标的数，例如："

#: C/superscript.page:17(p)
msgid "x³+2x²−5"
msgstr "x³+2x²−5"

#: C/superscript.page:21(p)
msgid ""
"To enter superscript numbers with the mouse select the number mode using the "
"the <gui>↑n</gui> and <gui>↓n</gui> buttons. When one of these modes is "
"active clicking the number buttons will enter numbers in superscript or "
"subscript. To return to normal number mode click the active button."
msgstr ""
"要输入一个上标数，用鼠标点 <gui>↑n</gui> and <gui>↓n</gui> 按钮。当激活一种模"
"式后，再点击输入的数字将是上标或下标。要返回到普通模式，再次点击激活的按钮。"

#: C/superscript.page:26(p)
msgid ""
"To enter superscript numbers with the keyboard hold down <key>Ctrl</key> "
"while entering the number. Hold <key>Alt</key> for subscript."
msgstr ""
"要用键盘输入上标，在输入数字的时候按住 <key>Ctrl</key> 键，按住 <key>Alt</"
"key> 是下标。"

#: C/superscript.page:30(p)
msgid ""
"The number mode returns to normal when entering the next non-number "
"character (e.g. +)."
msgstr "当接着输入一个非数字字符时(如 +)，也会回到普通模式。"

#: C/scientific.page:9(title)
msgid "Scientific Notation"
msgstr "科学计数"

#: C/scientific.page:11(p)
msgid ""
"To enter numbers in scientific format use the <gui>×10x</gui> button "
"(<keyseq><key>Ctrl</key><key>E</key></keyseq>). The <link xref=\"superscript"
"\">number mode</link> automatically changes to superscript. To enter "
"2×10¹⁰⁰, start by entering the mantissa (2):"
msgstr ""
"要输入一个科学计数值，使用 <gui>×10x</gui> 按钮(<keyseq><key>Ctrl</"
"key><key>E</key></keyseq>)。<link xref=\"superscript\">数字模式</link> 自动变"
"为上标。要输入 2×10¹⁰⁰，从尾数(2)开始输入："

#: C/scientific.page:17(p)
msgid "2"
msgstr "2"

#: C/scientific.page:21(p)
msgid ""
"Then press the scientific notation button (or press <keyseq><key>Ctrl</"
"key><key>E</key></keyseq>):"
msgstr ""
"然后点科学计数按钮(或者按 <keyseq><key>Ctrl</key><key>E</key></keyseq>):"

#: C/scientific.page:25(p)
msgid "2×10"
msgstr "2×10"

#: C/scientific.page:29(p)
msgid "Then enter the exponent (100):"
msgstr "然后输入指数 (100):"

#: C/scientific.page:33(p)
msgid "2×10¹⁰⁰"
msgstr "2×10¹⁰⁰"

#: C/scientific.page:37(p)
msgid ""
"To show results in scientific form change the <link xref=\"number-display"
"\">result format</link>."
msgstr ""
"要让结果用科学计数格式，在 <link xref=\"number-display\">结果格式</link> 里更"
"改。"

#: C/power.page:9(title)
msgid "Powers and Roots"
msgstr "幂和根"

#: C/power.page:11(p)
msgid ""
"Powers are entered by putting a <link xref=\"superscript\">superscript "
"number</link> after the value."
msgstr "幂是通过在一个数后面加上 <link xref=\"superscript\">上标</link>。"

#: C/power.page:15(p)
msgid "5²"
msgstr "5²"

#: C/power.page:19(p)
msgid ""
"The inverse of a number can be entered using the inverse symbol ⁻¹ "
"(<keyseq><key>Ctrl</key><key>I</key></keyseq>)."
msgstr ""
"一个数的倒数可以通过输入倒数符号 ⁻¹ (<keyseq><key>Ctrl</key><key>I</key></"
"keyseq>)。"

#: C/power.page:23(p)
msgid "3⁻¹"
msgstr "3⁻¹"

#: C/power.page:27(p)
msgid ""
"Powers can also be calculated using the ^ symbol. This allows the power to "
"be an equation."
msgstr "幂运算也可以使用 ^ 符号。这使幂成为一个代数式。"

#: C/power.page:32(p)
msgid "5^(6−2)"
msgstr "5^(6−2)"

#: C/power.page:36(p)
msgid ""
"If your keyboard does not have a <key>^</key> key you can use <key>*</key> "
"twice."
msgstr "如果您的键盘上没有 <key>^</key> 键，也可以使用两个 <key>*</key>。"

#: C/power.page:39(p)
msgid ""
"Square roots can be calculated using the symbol (<keyseq><key>Ctrl</"
"key><key>R</key></keyseq>)."
msgstr "平方根运算可以使用根号(<keyseq><key>Ctrl</key><key>R</key></keyseq>)。"

#: C/power.page:43(p)
msgid "√2"
msgstr "√2"

#: C/power.page:47(p)
msgid ""
"n-th roots can be calculated by putting a <link xref=\"superscript"
"\">subscript number</link> before the root sign."
msgstr ""
"n 次根式运算，可以在根号前面使用 <link xref=\"superscript\">下标</link>。"

#: C/power.page:51(p)
msgid "₃√2"
msgstr "₃√2"

#: C/percentage.page:9(title)
msgid "Percentages"
msgstr "百分数"

#: C/percentage.page:11(p)
msgid "Percentages are calculated using the % symbol."
msgstr "百分比运算使用 %"

#: C/percentage.page:14(p)
msgid ""
"When added or subtracted the percentage symbol resolves to one percent of "
"the value being added or subtracted from. The following equation calculates "
"the price of a $140 item with 15% tax (140 + (15÷100)×140)."
msgstr ""
"如果使用加减，加减的是这个值的百分数。下面的式子计算了 140 元和 15% 税物品的"
"价格(140 + (15÷100)×140)："

#: C/percentage.page:19(p)
msgid "140+15%"
msgstr "140+15%"

#: C/percentage.page:23(p)
msgid ""
"In all other cases the percentage symbol resolves to a fraction out of 100. "
"The following equation calculates one quarter of 80 apples ((25÷100)×80)."
msgstr ""
"在其他百分号情况，结果是100里的一部分。下面的式子计算了80个苹果的四分之一"
"((25÷100)×80)："

#: C/percentage.page:28(p)
msgid "25%×80"
msgstr "25%×80"

#: C/number-display.page:9(title)
msgid "Result Format"
msgstr "结果格式"

#: C/number-display.page:11(p)
msgid ""
"The format used to display results can be changed from the "
"<guiseq><gui>Calculator</gui><gui>Preferences</gui></guiseq> menu."
msgstr ""
"显示结果的格式，可以在 <guiseq><gui>计算器</gui><gui>首选项</gui></guiseq> 菜"
"单中更改。"

#: C/number-display.page:16(p)
msgid "Decimal"
msgstr "十进制"

#: C/number-display.page:17(p)
msgid "Results are displayed as decimal numbers"
msgstr "结果显示为十进制数"

#: C/number-display.page:20(p) C/mouse.page:25(p)
msgid "Scientific"
msgstr "&ldquo;科学&rdquo;"

#: C/number-display.page:21(p)
msgid ""
"Results are displayed in <link xref=\"scientific\">scientific notation</link>"
msgstr "结果显示为 <link xref=\"scientific\">科学计数</link>"

#: C/number-display.page:24(p)
msgid "Engineering"
msgstr "工程"

#: C/number-display.page:25(p)
msgid ""
"Results are displayed in scientific notation except the exponent is always a "
"multiple of three"
msgstr "结果以科学计数法显示，指数始终为 3 的倍数。"

#: C/number-display.page:28(p)
msgid "Binary"
msgstr "二进制"

#: C/number-display.page:29(p)
msgid "Results are displayed as <link xref=\"base\">binary numbers</link>"
msgstr "结果显示为 <link xref=\"base\">二进制数</link>"

#: C/number-display.page:32(p)
msgid "Octal"
msgstr "八进制"

#: C/number-display.page:33(p)
msgid "Results are displayed as <link xref=\"base\">octal numbers</link>"
msgstr "结果显示为 <link xref=\"base\">八进制数</link>"

#: C/number-display.page:36(p)
msgid "Hexadecimal"
msgstr "十六进制"

#: C/number-display.page:37(p)
msgid "Results are displayed as <link xref=\"base\">hexadecimal numbers</link>"
msgstr "结果显示为 <link xref=\"base\">十六进制数</link>"

#: C/number-display.page:40(p)
msgid ""
"The number of decimal places, if trailing zeroes and if thousands separators "
"are shown can also be configured."
msgstr "十进制数的小数点，是否后面补零，是否千分位分隔，也可以进行配置。"

#: C/mouse.page:9(title)
msgid "Using the Mouse"
msgstr "使用鼠标"

#: C/mouse.page:11(p)
msgid ""
"All equations can be entered using the mouse. To access all buttons there "
"are a number of modes that can be selected from the <gui>View</gui> menu."
msgstr ""
"所有的式子都可以用鼠标来输入，要访问所有各种模式的按钮，可以在 <gui>查看</"
"gui> 菜单选择。"

#: C/mouse.page:17(p)
msgid "Basic"
msgstr "&ldquo;基本&rdquo;"

#: C/mouse.page:18(p)
msgid ""
"Provides buttons suitable for <link xref=\"equation\">basic equations</link>"
msgstr "为 <link xref=\"equation\">基本运算</link> 提供一套按钮"

#: C/mouse.page:21(p)
msgid "Advanced"
msgstr "高级"

#: C/mouse.page:22(p)
msgid "Provides buttons suitable for advanced mathematics"
msgstr "为高级运算提供一套按钮"

#: C/mouse.page:26(p)
msgid ""
"Provides buttons suitable for <link xref=\"trigonometry\">trigonometry</link>"
msgstr "为 <link xref=\"trigonometry\">三角函数</link> 提供一套按钮"

#: C/mouse.page:29(p)
msgid "Financial"
msgstr "财务"

#: C/mouse.page:30(p)
msgid ""
"Provides buttons suitable for <link xref=\"financial\">financial equations</"
"link>"
msgstr "为 <link xref=\"financial\">财务运算</link> 提供一套按钮"

#: C/mouse.page:33(p)
msgid "Programming"
msgstr "编程"

#: C/mouse.page:34(p)
msgid "Provides buttons suitable for computer programmers"
msgstr "为计算机编程提供一套按钮"

#: C/modulus.page:9(title)
msgid "Modulus Division"
msgstr "取模运算"

#: C/modulus.page:11(p)
msgid "Modulus division is performed using the mod operator."
msgstr "取模运算使用 mod 操作符。"

#: C/modulus.page:15(p)
msgid "9 mod 5"
msgstr "9 mod 5"

#: C/logarithm.page:9(title)
msgid "Logarithms"
msgstr "常用对数"

#: C/logarithm.page:11(p)
msgid ""
"Logarithms can be calculated using the log <link xref=\"function\">function</"
"link>."
msgstr "对数运算可以使用 log<link xref=\"function\">函数</link>。"

#: C/logarithm.page:15(p)
msgid "log 100"
msgstr "log 100"

#: C/logarithm.page:19(p)
msgid ""
"To calculate a logarithm in a different base use a <link xref=\"superscript"
"\">subscript number</link> after the function."
msgstr ""
"要计算一个不同底数的对数，请在对数函数后面使用 <link xref=\"superscript\">下"
"标</link>。"

#: C/logarithm.page:23(p)
msgid "log₂ 32"
msgstr "log₂ 32"

#: C/logarithm.page:27(p)
msgid "To calculate a natural logarithm use the ln function."
msgstr "要进行自然对数运算，请使用 ln 函数。"

#: C/logarithm.page:31(p)
msgid "ln 1.32"
msgstr "ln 1.32"

#: C/logarithm.page:35(p)
msgid ""
"Euler's number can be entered by using the <link xref=\"variable\">variable</"
"link> e."
msgstr "欧拉数可以用 <link xref=\"variable\">变量</link> e"

#: C/logarithm.page:39(p)
msgid "e^1.32"
msgstr "e^1.32"

#: C/keyboard.page:9(title)
msgid "Using the Keyboard"
msgstr "使用键盘"

#: C/keyboard.page:11(p)
msgid "All mathematical equations can be entered using the keyboard."
msgstr "所有的表达式都可以用键盘输入。"

#: C/keyboard.page:14(p)
msgid ""
"The following key combinations can be used to enter keys that may not be "
"available on your keyboard."
msgstr "下列组合键可以用于输入，可能在您的键盘上不可用的符号。"

#: C/keyboard.page:19(p)
msgid "×"
msgstr "×"

#: C/keyboard.page:20(key)
msgid "*"
msgstr "*"

#: C/keyboard.page:23(p)
msgid "÷"
msgstr "÷"

#: C/keyboard.page:24(key)
msgid "/"
msgstr "/"

#: C/keyboard.page:27(p)
msgid "^"
msgstr "^"

#: C/keyboard.page:28(p)
msgid "<key>*</key> twice"
msgstr "<key>*</key> 两次"

#: C/keyboard.page:31(p)
msgid "√"
msgstr "√"

#: C/keyboard.page:32(key) C/keyboard.page:36(key)
msgid "Ctrl"
msgstr "Ctrl"

#: C/keyboard.page:32(key)
msgid "R"
msgstr "R"

#: C/keyboard.page:36(key)
msgid "P"
msgstr "P"

#: C/keyboard.page:39(p)
msgid ""
"To enter <link xref=\"superscript\">superscript numbers</link> use "
"<keyseq><key>Ctrl</key>number</keyseq>, for subscript use <keyseq><key>Alt</"
"key>number</keyseq>."
msgstr ""
"要输入 <link xref=\"superscript\">上标 numbers</link>，请使用 "
"<keyseq><key>Ctrl</key> 数字</keyseq>，下标用<keyseq><key>Alt</key> 数字</"
"keyseq>。"

#: C/index.page:7(name)
msgid "Robert Ancell"
msgstr "Robert Ancell"

#: C/index.page:8(email)
msgid "robert.ancell@gmail.com"
msgstr "robert.ancell@gmail.com"

#: C/index.page:13(title)
msgid "mate-calc Help"
msgstr "mate-calc 帮助"

#: C/index.page:16(title)
msgid "User Interface"
msgstr "用户界面"

#: C/index.page:20(title)
msgid "Equations"
msgstr "表达式"

#: C/index.page:24(title)
msgid "Numbers"
msgstr "数"

#: C/index.page:28(title)
msgid "Conversions"
msgstr "转换"

#: C/index.page:32(title)
msgid "Financial Calculations"
msgstr "财务运算"

#: C/functions.page:9(title)
msgid "Functions"
msgstr "函数"

#: C/functions.page:11(p)
msgid ""
"Functions can be used by inserting the name of the function followed by the "
"function argument. If the argument is not a number or <link xref=\"variable"
"\">variable</link> then use parenthesis around the argument."
msgstr ""
"函数可以用插入函数名和参数的方法，如果参数不是数字或 <link xref=\"variable\">"
"变量</link>，那么要用括号括起来。"

#: C/functions.page:16(p)
msgid "sin 30"
msgstr "sin 30"

#: C/functions.page:19(p)
msgid "abs (5−9)"
msgstr "abs (5−9)"

#: C/functions.page:23(p)
msgid "The following functions are defined."
msgstr "下面是预定义的函数。"

#: C/functions.page:28(p)
msgid "abs"
msgstr "abs"

#: C/functions.page:29(link)
msgid "Absolute Value"
msgstr "绝对值"

#: C/functions.page:32(p)
msgid "cos"
msgstr "cos"

#: C/functions.page:33(link)
msgid "Cosine"
msgstr "余弦"

#: C/functions.page:36(p)
msgid "cosh"
msgstr "cosh"

#: C/functions.page:37(link)
msgid "Hyperbolic Cosine"
msgstr "双曲余弦"

#: C/functions.page:40(p)
msgid "frac"
msgstr "frac"

#: C/functions.page:41(p)
msgid "Fractional Component"
msgstr "小数部分"

#: C/functions.page:44(p)
msgid "int"
msgstr "int"

#: C/functions.page:45(p)
msgid "Integer Component"
msgstr "整数部分"

#: C/functions.page:48(p)
msgid "ln"
msgstr "ln"

#: C/functions.page:49(link)
msgid "Natural Logarithm"
msgstr "自然对数"

#: C/functions.page:52(p)
msgid "log"
msgstr "log"

#: C/functions.page:53(link)
msgid "Logarithm"
msgstr "常用对数"

#: C/functions.page:56(p)
msgid "not"
msgstr "not"

#: C/functions.page:57(link)
msgid "Boolean NOT"
msgstr "逻辑非"

#: C/functions.page:60(p)
msgid "ones"
msgstr "ones"

#: C/functions.page:61(p)
#, fuzzy
msgid "Ones complement"
msgstr "Ones complement"

#: C/functions.page:64(p)
msgid "sin"
msgstr "sin"

#: C/functions.page:65(link)
msgid "Sine"
msgstr "正弦"

#: C/functions.page:68(p)
msgid "sinh"
msgstr "sinh"

#: C/functions.page:69(link)
msgid "Hyperbolic Sine"
msgstr "双曲正弦"

#: C/functions.page:72(p)
msgid "sqrt"
msgstr "sqrt"

#: C/functions.page:73(link)
msgid "Square Root"
msgstr "平方根"

#: C/functions.page:76(p)
msgid "tan"
msgstr "tan"

#: C/functions.page:77(link)
msgid "Tangent"
msgstr "正切"

#: C/functions.page:80(p)
msgid "tanh"
msgstr "tanh"

#: C/functions.page:81(link)
msgid "Hyperbolic Tangent"
msgstr "双曲正切"

#: C/functions.page:84(p)
msgid "twos"
msgstr "twos"

#: C/functions.page:85(p)
#, fuzzy
msgid "Twos complement"
msgstr "Twos complement"

#: C/functions.page:88(p)
msgid "<app>mate-calc</app> does not support user-defined functions."
msgstr "<app>计算器</app>不支持用户自定义函数。"

#: C/financial.page:9(title)
msgid "Financial Functions"
msgstr "财务函数"

#: C/financial.page:10(p)
msgid ""
"When in <link xref=\"superscript\">financial mode</link> the following "
"buttons are available."
msgstr "在 <link xref=\"superscript\">财务</link> 模式中，下列按钮可用："

#: C/financial.page:15(p)
msgid "Ctrm"
msgstr "Ctrm"

#: C/financial.page:16(p)
msgid ""
"Calculate the number of compounding periods necessary to increase an "
"investment of present value to a future value, at a fixed interest rate per "
"compounding period."
msgstr ""
"计算复利周期需要增加投资将现值投资从当前值到将来值，在每个复利期的固定利率。"

#: C/financial.page:19(p)
msgid "Ddb"
msgstr "Ddb"

#: C/financial.page:20(p)
msgid ""
"Calculate the depreciation allowance on an asset for a specified period of "
"time, using the double-declining balance method."
msgstr "使用双倍余额递减法计算资产在指定时间期间内的折旧额。"

#: C/financial.page:23(p)
msgid "Fv"
msgstr "Fv"

#: C/financial.page:24(p)
msgid ""
"Calculate the future value of an investment based on a series of equal "
"payments at a periodic interest rate over the number of payment periods in "
"the term."
msgstr "计算投资的未来值，按约定付款基数的固定利率下每期等额付款。"

#: C/financial.page:27(p)
msgid "Gpm"
msgstr "Gpm"

#: C/financial.page:28(p)
msgid ""
"Calculate the resale price of a product, based on the product cost and the "
"wanted gross profit margin."
msgstr "计算某产品的转售价格，按产品成本及期望的毛利润。"

#: C/financial.page:31(p)
msgid "Pmt"
msgstr "Pmt"

#: C/financial.page:32(p)
msgid ""
"Calculate the amount of the periodic payment of a loan, where payments are "
"made at the end of each payment period."
msgstr "计算一笔贷款的分期支付额，支付活动在每个支付期末进行。"

#: C/financial.page:35(p)
msgid "Pv"
msgstr "Pv"

#: C/financial.page:36(p)
msgid ""
"Calculate the present value of an investment based on a series of equal "
"payments discounted at a periodic interest rate over the number of payment "
"periods in the term."
msgstr "计算一项投资的现值，该投资基于投资期各支付期间的一系列等量支付。"

#: C/financial.page:39(p)
msgid "Rate"
msgstr "Rate"

#: C/financial.page:40(p)
msgid ""
"Calculate the periodic interest necessary to increase an investment to a "
"future value, over the number of compounding periods."
msgstr "计算某投资增加到某一未来值所需的每期利率，在期间内的复利周期数。"

#: C/financial.page:43(p)
msgid "Sln"
msgstr "Sln"

#: C/financial.page:44(p)
msgid ""
"Calculate the straight-line depreciation of an asset for one period. The "
"straight-line method of depreciation divides the depreciable cost evenly "
"over the useful life of an asset. The useful life is the number of periods, "
"typically years, over which an asset is depreciated."
msgstr ""
"计算某项资产在一段时间期限内的直线折旧额。直线折旧法在资产的使用期限内平均分"
"担可折旧值。使用期限为资产折旧的期间数，通常为年数。"

#: C/financial.page:47(p)
msgid "Syd"
msgstr "Syd"

#: C/financial.page:48(p)
msgid ""
"Calculate the depreciation allowance on an asset for a specified period of "
"time, using the Sum-of-the-Years'-Digits method. This method of depreciation "
"accelerates the rate of depreciation, so that more depreciation expense "
"occurs in earlier periods than in later ones. The useful life is the number "
"of periods, typically years, over which an asset is depreciated."
msgstr ""
"计算资产在指定时间期限内的折旧额，使用年数总和法。这种折旧方法会加快折旧的速"
"度，因此前期比后期发生更多折旧费用。使用期限指该资产折旧期数，通常情况为年。"

#: C/financial.page:51(p)
msgid "Term"
msgstr "Term"

#: C/financial.page:52(p)
msgid ""
"Calculate the number of payment periods that are necessary during the term "
"of an ordinary annuity, to accumulate a future value, at a periodic interest "
"rate."
msgstr "计算期限内普通年金积累到某一未来值需要的付款期数，按某一每期利率。"

#: C/financial.page:56(p)
msgid "Financial functions cannot be performed using the keyboard."
msgstr "财务函数不能使用键盘来执行。"

#: C/factorize.page:9(title)
msgid "Factorization"
msgstr "因式分解"

#: C/factorize.page:11(p)
msgid ""
"You can factorize the number currently displayed by pressing the <gui>fact</"
"gui> button. This button is visible in <link xref=\"mouse\">programming "
"mode</link>."
msgstr ""
"您可以将当前显示的数进行因式分解，通过点 <gui>fact</gui> 按钮，这个按钮在 "
"<link xref=\"mouse\">编程模式</link> 下可见。"

#: C/factorial.page:9(title)
msgid "Factorials"
msgstr "阶乘"

#: C/factorial.page:11(p)
msgid ""
"Factorials are entered using the ! symbol. To calculate the factorial of 6 "
"enter the following."
msgstr "阶乘用 ! 符号输入，要计算 6 的阶乘，按如下操作："

#: C/factorial.page:16(p)
msgid "6!"
msgstr "6!"

#. Place this at the start of the section
#: C/equation.page:7(title)
msgid "0"
msgstr "0"

#: C/equation.page:11(title)
msgid "Basic Equations"
msgstr "基本式子"

#: C/equation.page:13(p)
msgid ""
"Equations are entered in standard mathematical form. For example to add 7 "
"and 2 enter the following:"
msgstr "表达式在标准数学模式中输入，例如 7 加 2 如下操作："

#: C/equation.page:18(p)
msgid "7+2"
msgstr "7+2"

#: C/equation.page:22(p)
msgid ""
"To solve, press the <gui>=</gui> button with your mouse or the <key>Enter</"
"key> key on your keyboard."
msgstr "要得到结果，用鼠标点 <gui>=</gui> 按钮，或者按键盘上的回车键。"

#: C/equation.page:25(p)
msgid ""
"Calculations are performed in mathematical order - multiplication and "
"division are performed before addition and subtraction. The following "
"equation solves to 1 (3×2 = 6, 7−6 = 1)."
msgstr ""
"计算按数学运算法则 - 先乘除后加减。下面的式子结果为 1 (3×2 = 6，7−6 = 1)。"

#: C/equation.page:30(p)
msgid "7−3×2"
msgstr "7−3×2"

#: C/equation.page:34(p)
msgid ""
"To change the order of calculation use parenthesis. The following equation "
"solves to 8 (7−3 = 4, 4×2 = 8)."
msgstr "可以用括号来改变运算顺序，下面的式子结果为 8 (7−3 = 4，4×2 = 8)。"

#: C/equation.page:39(p)
msgid "(7−3)×2"
msgstr "(7−3)×2"

#: C/equation.page:43(p)
msgid ""
"To clear the display press the <gui>Clr</gui> button or <key>Escape</key>."
msgstr "要清除显示，点击 <gui>Clr</gui> 按钮或按 <key>Escape</key> 键。"

#: C/conv-weight.page:9(title)
msgid "Mass"
msgstr "质量"

#: C/conv-weight.page:11(p)
msgid "To convert between mass use the <em>in</em> operator."
msgstr "要转换两个质量单位，请使用 <em>in</em> 操作符。"

#: C/conv-weight.page:15(p)
msgid "1kg in pounds"
msgstr "1kg in pounds"

#: C/conv-weight.page:20(p)
msgid "Mass conversions must be performed using the keyboard."
msgstr "质量转换必须使用键盘来执行。"

#: C/conv-time.page:9(title)
msgid "Time"
msgstr "时间"

#: C/conv-time.page:11(p)
msgid "To convert between time use the <em>in</em> operator."
msgstr "要转换两个时间单位，请使用 <em>in</em> 操作符。"

#: C/conv-time.page:15(p)
msgid "3 years in hours"
msgstr "3 years in hours"

#: C/conv-time.page:20(p)
msgid "Time conversions must be performed using the keyboard."
msgstr "时间转换必须使用键盘来执行。"

#: C/conv-length.page:9(title)
msgid "Length/Area/Volume"
msgstr "长度/面积/体积"

#: C/conv-length.page:11(p)
msgid ""
"To convert between length, area and volume units use the <em>in</em> "
"operator."
msgstr "要转换两个长度、面积和体积单位，请使用 <em>in</em> 操作符。"

#: C/conv-length.page:15(p)
msgid "6 meters in inches"
msgstr "6 meters in inches"

#: C/conv-length.page:18(p)
msgid "1 acre in cm²"
msgstr "1 acre in cm²"

#: C/conv-length.page:21(p)
msgid "1 pint in mL"
msgstr "1 pint in mL"

#: C/conv-length.page:26(p)
msgid "Length/Area/Volume conversions must be performed using the keyboard."
msgstr "长度/面积/体积转换必须使用键盘来执行。"

#: C/conv-currency.page:9(title)
msgid "Currency"
msgstr "货币"

#: C/conv-currency.page:11(p)
msgid ""
"To convert currencies press the <gui>¤$€</gui> button in <link xref="
"\"superscript\">financial mode</link>."
msgstr ""
"要转换货币，请在  <link xref=\"superscript\">财务模式</link> 中点 <gui>¤$€</"
"gui> 按钮。"

#: C/conv-currency.page:14(p)
msgid ""
"You can also convert currencies using the keyboard and the <em>in</em> "
"operator."
msgstr "您也可以用键盘和 <em>in</em> 操作符来转换货币。"

#: C/conv-currency.page:18(p)
msgid "13.65 USD in GBP"
msgstr "13.65 USD in GBP"

#: C/conv-currency.page:23(p)
msgid ""
"Currency information is approximate and should not be used for making "
"financial decisions."
msgstr "货币信息是一个大约值，不应该用于财务决策。"

#: C/conv-character.page:9(title)
msgid "Character Codes"
msgstr "字符代码"

#: C/conv-character.page:11(p)
msgid ""
"When in <link xref=\"mouse\">programming mode</link> the <gui>á</gui> button "
"opens a dialog to convert characters to character codes."
msgstr ""
"在 <link xref=\"mouse\">程序模式</link>，点 <gui>á</gui> 按钮会弹出一个转换字"
"符到字符代码的对话框。"

#: C/conv-character.page:15(p)
msgid "Characters cannot be converted using the keyboard."
msgstr "字符转换不能使用键盘操作。"

#: C/conv-base.page:9(title) C/base.page:9(title)
msgid "Number Bases"
msgstr "数值进制"

#: C/conv-base.page:11(p)
msgid ""
"To convert between number bases enter a number (or solve an equation) and "
"change the <link xref=\"number-display\">result format</link> from the "
"<guiseq><gui>Calculator</gui><gui>Preferences</gui></guiseq> menu."
msgstr ""
"要转换输入数(或一个式子的结果)的进制，在 <guiseq><gui>计算器</gui><gui>首选项"
"</gui></guiseq> 菜单的 <link xref=\"number-display\">结果格式</link> 中更改。"

#: C/complex.page:9(title)
msgid "Complex Numbers"
msgstr "复数"

#: C/complex.page:11(p)
msgid "Complex numbers are not supported in <app>mate-calc</app>."
msgstr "<app>计算器</app> 不支持复数。"

#: C/boolean.page:9(title)
msgid "Boolean Algebra"
msgstr "逻辑运算"

#: C/boolean.page:11(p)
msgid "Boolean algebra can be calculated using the AND, OR and XOR operators."
msgstr "逻辑运算可以用 AND、OR 和 XOR 操作符。"

#: C/boolean.page:15(p)
msgid "010011₂ AND 110101₂"
msgstr "010011₂ AND 110101₂"

#: C/boolean.page:19(p)
msgid ""
"Buttons for these symbols are available in <link xref=\"mouse\">programming "
"mode</link>."
msgstr "在 <link xref=\"mouse\">编程模式</link> 这些按钮是可用的。"

#: C/boolean.page:22(p)
msgid ""
"The NOT <link xref=\"function\">function</link> inverts the bits in a "
"number. The word size is set from the <guiseq><gui>Calculator</"
"gui><gui>Preferences</gui></guiseq> menu."
msgstr ""
"NOT <link xref=\"function\">函数</link> 反转一个数的每一数位。字的大小在 "
"<guiseq><gui>计算器</gui><gui>首选项</gui></guiseq> 菜单中设置。"

#: C/boolean.page:27(p)
msgid "NOT 010011₂"
msgstr "NOT 010011₂"

#: C/base.page:11(p)
msgid ""
"To enter numbers in a particular number base use <link xref=\"superscript"
"\">subscript numbers</link>. The following numbers are equivalent."
msgstr ""
"要用特定的数制输入一个数，请使用 <link xref=\"superscript\">下标</link>。下面"
"的数是等价的。"

#: C/base.page:16(p)
msgid "1001011₂"
msgstr "1001011₂"

#: C/base.page:19(p)
msgid "113₈"
msgstr "113₈"

#: C/base.page:22(p)
msgid "75"
msgstr "75"

#: C/base.page:25(p)
msgid "4B₁₆"
msgstr "4B₁₆"

#: C/base.page:29(p)
msgid ""
"When in <link xref=\"mouse\">programming mode</link> there are buttons for "
"binary (<keyseq><key>Ctrl</key><key>B</key></keyseq>), octal "
"(<keyseq><key>Ctrl</key><key>O</key></keyseq>) and hexadecimal "
"(<keyseq><key>Ctrl</key><key>H</key></keyseq>)."
msgstr ""
"在 <link xref=\"mouse\">编程模式</link> 里，有二进制按钮(<keyseq><key>Ctrl</"
"key><key>B</key></keyseq>)、八进制按钮 (<keyseq><key>Ctrl</key><key>O</key></"
"keyseq>) 和十六进制按钮 (<keyseq><key>Ctrl</key><key>H</key></keyseq>)。"

#: C/base.page:32(p)
msgid ""
"To set the base that results are shown in change the <link xref=\"number-"
"display\">result format</link>."
msgstr ""
"要设置运算结果的数制，请在 <link xref=\"number-display\">结果格式</link> 中更"
"改。"

#: C/base.page:35(p)
msgid ""
"To change the base of the current result use a base button or "
"<keyseq><key>Ctrl</key><key>D</key></keyseq> to show in decimal form."
msgstr ""
"要更改当前结果的数制，点击一个数制按钮或按 <keyseq><key>Ctrl</key><key>D</"
"key></keyseq> 显示十进制格式。"

#: C/absolute.page:9(title)
msgid "Absolute Values"
msgstr "绝对值"

#: C/absolute.page:11(p)
msgid ""
"Absolute values are calculated using the | symbol or abs <link xref="
"\"function\">function</link>."
msgstr "绝对值运算使用 | 符号，或 abs <link xref=\"function\">函数</link>。"

#: C/absolute.page:15(p)
msgid "|−1|"
msgstr "|−1|"

#: C/absolute.page:18(p)
msgid "abs (−1)"
msgstr "abs (−1)"

#. Put one translator per line, in the form of NAME <EMAIL>, YEAR1, YEAR2
#: C/index.page:0(None)
msgid "translator-credits"
msgstr "TeliuTe <teliute@163.com>, 2010"

#~ msgid "<application>mate-calc</application> Manual V2.5"
#~ msgstr "<application>Calculator</application> 手册 V2.5"

#~ msgid "mate-calc Manual V2.5"
#~ msgstr "mate-calc 手册 V2.5"

#~ msgid "mate-calc Manual V2.4"
#~ msgstr "mate-calc 手册 V2.4"

#~ msgid "June 2003"
#~ msgstr "2003 年 6 月"

#~ msgid "mate-calc Manual V2.3"
#~ msgstr "mate-calc 手册 V2.3"

#~ msgid "April 2003"
#~ msgstr "2003 年 4 月"

#~ msgid "mate-calc Manual V2.2"
#~ msgstr "mate-calc 手册 V2.2"

#~ msgid "mate-calc Manual V2.1"
#~ msgstr "mate-calc 手册 V2.1"

#~ msgid "March 2003"
#~ msgstr "2003 年 3 月"

#~ msgid "mate-calc Manual V2.0"
#~ msgstr "mate-calc 手册 V2.0"

#~ msgid ""
#~ "This manual describes version 4.2.100 of <application>mate-calc</"
#~ "application>."
#~ msgstr "本手册介绍 <application>Calculator</application> 4.2.103 版。"

#~ msgid "Feedback"
#~ msgstr "反馈"

#~ msgid ""
#~ "To report a bug or make a suggestion regarding the "
#~ "<application>mate-calc</application> application or this manual, follow "
#~ "the directions in the <ulink url=\"ghelp:mate-feedback\" type=\"help"
#~ "\">MATE Feedback Page</ulink>."
#~ msgstr ""
#~ "要报告关于 <application>Calculator</application> 应用程序或本手册的错误或"
#~ "提出建议，请遵循 <ulink url=\"ghelp:mate-feedback\" type=\"help\">MATE "
#~ "反馈页</ulink>中的指导。"

#, fuzzy
#~ msgid "Calculator"
#~ msgstr ""
#~ "#-#-#-#-#  zh_CN-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "计算器\n"
#~ "#-#-#-#-#  zh_CN-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "&ldquo;计算器&rdquo;"

#~ msgid "Introduction"
#~ msgstr "简介"

#~ msgid ""
#~ "The <application>mate-calc</application> application is multifunctional "
#~ "and can handle different types of mathematical approaches."
#~ msgstr ""
#~ "<application>Calculator</application> 应用程序是一个多功能应用程序，可以处"
#~ "理不同类型的数学方法。"

#~ msgid ""
#~ "The <application>mate-calc</application> application has the following "
#~ "modes:"
#~ msgstr "<application>Calculator</application> 应用程序具有以下模式："

#~ msgid "Basic Mode"
#~ msgstr "基本模式"

#~ msgid ""
#~ "Provides standard calculator functions. You can store numbers in 10 "
#~ "different memory registers, and easily retrieve and replace the numbers "
#~ "in the memory registers. Basic Mode is the default mode. You can use all "
#~ "of the Basic Mode functions in each of the other modes."
#~ msgstr ""
#~ "提供标准计算器功能。您可以将数字存储于 10 个不同的存储寄存器中，并可以方便"
#~ "的检索和替换存储寄存器中的数字。&ldquo;基本模式&rdquo;是默认模式。在所有其"
#~ "它模式中您都可以使用所有&ldquo;基本模式&rdquo;功能。"

#~ msgid "Provides several complex financial functions."
#~ msgstr "提供若干复杂的财务功能。"

#~ msgid ""
#~ "Provides many additional mathematical functions, including trigonometric "
#~ "and logical functions. You can also store your own functions and "
#~ "constants, when you use Scientific Mode."
#~ msgstr ""
#~ "提供许多附加的数学函数，包括三角函数和逻辑函数。在使用&ldquo;科学模式"
#~ "&rdquo;时，您还可以存储自己的函数和常量。"

#~ msgid ""
#~ "You can use <application>mate-calc</application> in the following "
#~ "numbering systems:"
#~ msgstr "您可以在下列进位系统中使用 <application>Calculator</application>："

#~ msgid "Numbering System"
#~ msgstr "进位系统"

#~ msgid "Base"
#~ msgstr "进制"

#~ msgid ""
#~ "To start <application>mate-calc</application></application> from a "
#~ "command line, type the following command, then press <keycap>Return</"
#~ "keycap>:"
#~ msgstr ""
#~ "To start <application>Calculator</application></application> from a "
#~ "command line, type the following command, then press <keycap>Return</"
#~ "keycap>:"

#~ msgid ""
#~ "When you start <application>mate-calc</application></application>, the "
#~ "following window is displayed:"
#~ msgstr ""
#~ "When you start <application>Calculator</application></application>, the "
#~ "following window is displayed:"

#~ msgid "<application>mate-calc</application> Basic Mode Window"
#~ msgstr "<application>Calculator</application>&ldquo;基本模式&rdquo;窗口"

#~ msgid "Shows <application>mate-calc</application> Basic Mode window."
#~ msgstr ""
#~ "显示 <application>Calculator</application>&ldquo;基本模式&rdquo;窗口。"

#~ msgid ""
#~ "The <application>mate-calc</application></application> window contains "
#~ "the following elements:"
#~ msgstr ""
#~ "<application>Calculator</application></application> 窗口包含以下元素："

#~ msgid "Menubar"
#~ msgstr "菜单栏"

#~ msgid ""
#~ "The menus on the menubar contain all of the commands that you need to "
#~ "work with <application>mate-calc</application></application>."
#~ msgstr ""
#~ "菜单栏上的菜单包含使用 <application>Calculator</application></"
#~ "application> 时所需的全部命令。"

#~ msgid "Display area"
#~ msgstr "显示区域"

#~ msgid ""
#~ "The display area shows the numbers that you enter, and the results of "
#~ "calculations. You can enter numbers of up to forty digits."
#~ msgstr "显示区域显示您输入的数字以及运算结果。您最多可以输入 40 位数字。"

#~ msgid "Mode area"
#~ msgstr "模式区域"

#~ msgid ""
#~ "The mode area displays the buttons for the currently selected mode. The "
#~ "Basic Mode buttons are always displayed. When you choose Financial Mode, "
#~ "the Financial Mode buttons are displayed above the Basic Mode buttons. "
#~ "When you choose Scientific Mode, the Scientific Mode buttons are "
#~ "displayed above the Basic Mode Buttons."
#~ msgstr ""
#~ "模式区域显示的是当前所选模式的按钮。&ldquo;基本模式&rdquo;按钮是始终显示"
#~ "的。选择&ldquo;财务模式&rdquo;时，&ldquo;财务模式&rdquo;按钮显示在&ldquo;"
#~ "基本模式&rdquo;按钮的上方。选择&ldquo;科学模式&rdquo;时，&ldquo;科学模式"
#~ "&rdquo;按钮显示在&ldquo;基本模式&rdquo;按钮的上方。"

#~ msgid "Popup Menu"
#~ msgstr "弹出菜单"

#~ msgid "Shows popup-menu symbol."
#~ msgstr "显示弹出菜单符号。"

#~ msgid ""
#~ "The <placeholder-1/> symbol on a <application>mate-calc</application> "
#~ "button indicates that a popup menu is displayed when you click on that "
#~ "button."
#~ msgstr ""
#~ "<placeholder-1/> 符号（位于 <application>Calculator</application> 按钮上）"
#~ "指示单击按钮时显示一个弹出菜单。"

#~ msgid "Usage"
#~ msgstr "用法"

#~ msgid "To Use Calculator Functions"
#~ msgstr "使用计算器功能"

#~ msgid "To perform a calculation, use one of the following methods:"
#~ msgstr "要执行一项运算，请使用以下方法之一："

#~ msgid ""
#~ "Click on the <application>mate-calc</application> buttons to enter "
#~ "numbers and functions."
#~ msgstr "单击 <application>Calculator</application> 按钮，输入数字和函数。"

#~ msgid ""
#~ "Give focus to the <application>mate-calc</application> window, then use "
#~ "the keyboard or numeric keypad to specify the calculation that you want "
#~ "to perform. For a complete list of keyboard shortcuts, see <xref linkend="
#~ "\"mate-calc-keyboard-shortcut\"/>."
#~ msgstr ""
#~ "将焦点转到 <application>Calculator</application> 窗口，然后使用键盘或数字"
#~ "键盘指定要执行的运算。有关键盘快捷键的完整列表，请参见 <xref linkend="
#~ "\"mate-calc-keyboard-shortcut\"/>。"

#~ msgid ""
#~ "The <application>mate-calc</application> application automatically "
#~ "displays numbers with more than 40 digits, and small numbers, as "
#~ "exponential numbers. For example, the following table shows the value "
#~ "that is displayed when you use the decimal numeric base with an accuracy "
#~ "of 2 significant places:"
#~ msgstr ""
#~ "<application>Calculator</application> 应用程序自动以指数的形式显示超过 40 "
#~ "位的数字和小数。例如，下表显示了在使用十进制并精确到小数点后两位时显示的"
#~ "值："

#~ msgid "Display"
#~ msgstr "显示"

#~ msgid "Signifies"
#~ msgstr "表示"

#~ msgid ""
#~ "For information about how to enter a number in exponential format, see "
#~ "<xref linkend=\"mate-calc-enter-exp\"/>."
#~ msgstr ""
#~ "有关如何以指数格式输入数字的信息，请参见 <xref linkend=\"mate-calc-enter-"
#~ "exp\"/>。"

#~ msgid ""
#~ "To copy the result of a calculation, choose <menuchoice><guimenu>Edit</"
#~ "guimenu><guimenuitem>Copy</guimenuitem></menuchoice>. You can paste the "
#~ "value into another application."
#~ msgstr ""
#~ "要复制运算结果，请选择 <menuchoice><guimenu>&ldquo;编辑&rdquo;</"
#~ "guimenu><guimenuitem>&ldquo;复制&rdquo;</guimenuitem></menuchoice>。 您可"
#~ "以将该值粘贴到其它应用程序中。"

#~ msgid ""
#~ "To paste a previously copied value into the display area, choose "
#~ "<menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></"
#~ "menuchoice>."
#~ msgstr ""
#~ "要将以前复制过的值粘贴到显示区域，请选择 <menuchoice><guimenu>&ldquo;编辑"
#~ "&rdquo;</guimenu><guimenuitem>&ldquo;粘贴&rdquo;</guimenuitem></"
#~ "menuchoice>。"

#~ msgid "To Perform Basic Calculations"
#~ msgstr "执行基本运算"

#~ msgid ""
#~ "Basic Mode is displayed by default when you first start "
#~ "<application>mate-calc</application>. To explicitly invoke Basic Mode, "
#~ "choose <menuchoice><guimenu>View</guimenu><guimenuitem>Basic Mode</"
#~ "guimenuitem></menuchoice>."
#~ msgstr ""
#~ "首次启动 <application>Calculator</application> 时，默认显示的是&ldquo;基本"
#~ "模式&rdquo;。要明确调用&ldquo;基本模式&rdquo;，请选择 "
#~ "<menuchoice><guimenu>&ldquo;视图&rdquo;</guimenu><guimenuitem>&ldquo;基本"
#~ "模式&rdquo;</guimenuitem></menuchoice>。"

#~ msgid "To Perform Simple Calculations"
#~ msgstr "执行简单运算"

#~ msgid ""
#~ "To perform simple calculations, use the buttons described in <xref "
#~ "linkend=\"mate-calc-TBL-simple-calc\"/>."
#~ msgstr ""
#~ "要执行简单的运算，请使用 <xref linkend=\"mate-calc-TBL-simple-calc\"/> 中"
#~ "介绍的按钮。"

#~ msgid "Performing Simple Calculations"
#~ msgstr "执行简单运算"

#~ msgid "Button"
#~ msgstr "按钮"

#~ msgid "Description"
#~ msgstr "说明"

#~ msgid "Example"
#~ msgstr "示例"

#~ msgid "Numerals"
#~ msgstr "数字"

#~ msgid "<guibutton>0</guibutton> to <guibutton>9</guibutton> inclusive"
#~ msgstr ""
#~ "<guibutton>&ldquo;0&rdquo;</guibutton>至<guibutton>&ldquo;9&rdquo;</"
#~ "guibutton>"

#~ msgid ""
#~ "In decimal and hexadecimal base, all numerals are available. In octal "
#~ "base, <guibutton>8</guibutton> and <guibutton>9</guibutton> are "
#~ "unavailable. In binary base, only <guibutton>0</guibutton> and "
#~ "<guibutton>1</guibutton> are available. The default base is decimal."
#~ msgstr ""
#~ "在使用十进制和十六进制时，所有数字都可用。在使用八进制时，"
#~ "<guibutton>&ldquo;8&rdquo;</guibutton>和<guibutton>&ldquo;9&rdquo;</"
#~ "guibutton>不可用。在使用二进制时，仅<guibutton>&ldquo;0&rdquo;</guibutton>"
#~ "和<guibutton>&ldquo;1&rdquo;</guibutton>可用。默认进制为十进制。"

#~ msgid "Numeric point"
#~ msgstr "小数点"

#~ msgid "Starts the fractional part of a numeric entry."
#~ msgstr "开始数字项的分数部分。"

#, fuzzy
#~ msgid "Calculate a result"
#~ msgstr ""
#~ "#-#-#-#-#  zh_CN-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "运算结果\n"
#~ "#-#-#-#-#  zh_CN-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "计算结果"

#~ msgid "Displays the result of the current calculation in the current base."
#~ msgstr "使用当前进制显示运算的结果。"

#~ msgid "Addition"
#~ msgstr "加"

#~ msgid ""
#~ "Adds the current value in the display area to the next number that you "
#~ "enter."
#~ msgstr "将显示区域中的当前值与您输入的下一个数字相加。"

#~ msgid ""
#~ "Subtracts from the current value in the display area the next number that "
#~ "you enter."
#~ msgstr "从显示区域中的当前值中减去您输入的下一个数字。"

#~ msgid "Multiplication"
#~ msgstr "乘"

#~ msgid ""
#~ "Multiplies the current value in the display area by the next number that "
#~ "you enter."
#~ msgstr "将显示区域中的当前值与您输入的下一个数字相乘。"

#~ msgid ""
#~ "Divides the current value in the display area by the next number that you "
#~ "enter."
#~ msgstr "用显示区域中的当前值除以您输入的下一个数字。"

#~ msgid "To Erase Characters"
#~ msgstr "擦除字符"

#~ msgid ""
#~ "To erase characters, use the buttons described in <xref linkend="
#~ "\"mate-calc-TBL-erase-char\"/>."
#~ msgstr ""
#~ "要擦除字符，请使用<xref linkend=\"mate-calc-TBL-erase-char\"/>中介绍的按"
#~ "钮。"

#, fuzzy
#~ msgid "Backspace"
#~ msgstr ""
#~ "#-#-#-#-#  zh_CN-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "Backspace（退格键）\n"
#~ "#-#-#-#-#  zh_CN-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "退格\n"
#~ "#-#-#-#-#  zh_CN-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "Backspace（退格键）\n"
#~ "#-#-#-#-#  zh_CN-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "退格"

#~ msgid "Removes the rightmost character from the display area."
#~ msgstr "删除显示区域中最右端的字符。"

#~ msgid "Clear Entry"
#~ msgstr "清除项"

#~ msgid "Removes the current value from the display area."
#~ msgstr "删除显示区域中的当前值。"

#~ msgid "Clear"
#~ msgstr "清除"

#~ msgid ""
#~ "Resets the current value in the display area to zero. <guibutton>Clr</"
#~ "guibutton> also deselects the <guilabel>Hyp</guilabel> and <guilabel>Inv</"
#~ "guilabel> options in Scientific Mode."
#~ msgstr ""
#~ "将显示区域中的当前值复位为零。在&ldquo;科学模式&rdquo;中，"
#~ "<guibutton>&ldquo;Clr&rdquo;</guibutton>还取消对<guilabel>&ldquo;"
#~ "Hyp&rdquo;</guilabel>和<guilabel>&ldquo;Inv&rdquo;</guilabel>选项的选择。"

#~ msgid "To Perform Arithmetic Calculations"
#~ msgstr "执行算术运算"

#~ msgid ""
#~ "To perform arithmetic calculations, use the buttons described in <xref "
#~ "linkend=\"mate-calc-TBL-arith-calc\"/>."
#~ msgstr ""
#~ "要执行算术运算，请使用<xref linkend=\"mate-calc-TBL-arith-calc\"/>中介绍的"
#~ "按钮。"

#~ msgid "Performing Arithmetic Calculations"
#~ msgstr "执行算术运算"

#~ msgid ""
#~ "Uses the next number that you enter to calculate that percentage of the "
#~ "current value in the display area."
#~ msgstr "使用输入的下一个数字计算显示区域中当前值的百分数。"

#~ msgid "Reciprocal"
#~ msgstr "倒数"

#~ msgid "Divides 1 by the current value in the display area."
#~ msgstr "用 1 除以显示区域中的当前值。"

#, fuzzy
#~ msgid "Change the arithmetic sign"
#~ msgstr ""
#~ "#-#-#-#-#  zh_CN-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "更改算术符号\n"
#~ "#-#-#-#-#  zh_CN-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "更改算数符号"

#~ msgid ""
#~ "Changes a positive number to a negative number, or a negative number to a "
#~ "positive number."
#~ msgstr "将正数更改为负数，或将负数更改为正数。"

#~ msgid "Calculates the square root of the current value in the display area."
#~ msgstr "计算显示区域中的当前值的平方根。"

#~ msgid "Square"
#~ msgstr "平方"

#~ msgid "Calculates the square of the current value in the display area."
#~ msgstr "计算显示区域中的当前值的平方。"

#~ msgid ""
#~ "Calculates the integer portion of the current value in the display area."
#~ msgstr "计算显示区域中的当前值的整数部分。"

#~ msgid ""
#~ "Calculates the fractional portion of the current value in the display "
#~ "area."
#~ msgstr "计算显示区域中的当前值的分数部分。"

#~ msgid ""
#~ "Calculates the absolute value of the current value in the display area."
#~ msgstr "计算显示区域中的当前值的绝对值。"

#~ msgid "To Use the Calculator Memory Registers"
#~ msgstr "使用计算器存储寄存器"

#~ msgid ""
#~ "You can store values in any of the ten <application>mate-calc</"
#~ "application> memory registers <guilabel>R0</guilabel> to <guilabel>R9</"
#~ "guilabel>. To display the memory registers, choose "
#~ "<menuchoice><guimenu>View</guimenu><guimenuitem>Memory Registers</"
#~ "guimenuitem></menuchoice>."
#~ msgstr ""
#~ "您可以将值存储于<guilabel>&ldquo;R0&rdquo;</guilabel>至<guilabel>&ldquo;"
#~ "R9&rdquo;</guilabel>这十个 <application>Calculator</application> 存储寄存"
#~ "器中的任何一个中。要显示存储寄存器，请选择 <menuchoice><guimenu>&ldquo;视"
#~ "图&rdquo;</guimenu><guimenuitem>&ldquo;存储寄存器&rdquo;</guimenuitem></"
#~ "menuchoice>。"

#~ msgid ""
#~ "<xref linkend=\"mate-calc-TBL-mem-reg\"/> describes the memory functions "
#~ "that you can use."
#~ msgstr ""
#~ "<xref linkend=\"mate-calc-TBL-mem-reg\"/> 介绍了可以使用的存储功能。"

#~ msgid "Memory Functions"
#~ msgstr "存储功能"

#~ msgid "Store Value in Memory Register"
#~ msgstr "将值存储于存储寄存器中"

#~ msgid ""
#~ "Stores the current contents of the display area in the specified memory "
#~ "register. Click on <guibutton>Sto</guibutton>, and select a memory "
#~ "register from the popup menu."
#~ msgstr ""
#~ "将显示区域中的当前内容存储于指定的存储寄存器中。单击<guibutton>&ldquo;"
#~ "Sto&rdquo;</guibutton>，然后从弹出菜单中选择一个存储寄存器。"

#~ msgid ""
#~ "To clear a memory register during a <application>mate-calc</application> "
#~ "session:"
#~ msgstr ""
#~ "在 <application>Calculator</application> 会话运行期间清除存储寄存器："

#~ msgid "Click <guibutton>Clr</guibutton>."
#~ msgstr "单击<guibutton>&ldquo;Clr&rdquo;</guibutton>。"

#~ msgid "Click on <guibutton>Sto</guibutton>."
#~ msgstr "单击<guibutton>&ldquo;Sto&rdquo;</guibutton>。"

#~ msgid "Select the memory register from the popup menu."
#~ msgstr "从弹出菜单中选择该存储寄存器。"

#~ msgid "The value 22 is stored in memory register <guilabel>R2</guilabel>"
#~ msgstr "将值 22 存储于存储寄存器<guilabel>&ldquo;R2&rdquo;</guilabel>中"

#~ msgid "Retrieve Value From Memory Register"
#~ msgstr "从存储寄存器中检索值"

#~ msgid ""
#~ "Retrieves the contents of the specified memory register. Click on "
#~ "<guibutton>Rcl</guibutton>, and select the memory register from the popup "
#~ "menu."
#~ msgstr ""
#~ "检索指定存储寄存器中的内容。单击<guibutton>&ldquo;Rcl&rdquo;</guibutton>，"
#~ "然后从弹出菜单中选择该存储寄存器。"

#, fuzzy
#~ msgid "where 22 is the value previously stored in memory register R2"
#~ msgstr ""
#~ "#-#-#-#-#  zh_CN-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "其中，22 是以前存储于寄存器 R2 中的值\n"
#~ "#-#-#-#-#  zh_CN-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "其中，22 是以前存储于存储寄存器 R2 中的值"

#~ msgid "Exchange Memory Register Value and Displayed Value"
#~ msgstr "交换存储寄存器值与显示值"

#~ msgid ""
#~ "Exchanges the contents of the specified memory register and the current "
#~ "value in the display area. Click on <guibutton>Exch</guibutton>, and "
#~ "select the memory register from the popup menu."
#~ msgstr ""
#~ "将指定存储寄存器的内容与显示区域中的当前值进行交换。单击<guibutton>&ldquo;"
#~ "Exch&rdquo;</guibutton>，然后从弹出菜单中选择该存储寄存器。"

#~ msgid ""
#~ "Value in display area changes from 44 to 22, value in R2 changes from 22 "
#~ "to 44"
#~ msgstr "显示区域中的值从 44 改为 22，R2 中的值从 22 改为 44"

#~ msgid ""
#~ "If you use keyboard shortcuts, you can use the keyboard to specify the "
#~ "memory register, as shown in the following examples:"
#~ msgstr ""
#~ "如果使用键盘快捷键，则可以使用键盘指定该存储寄存器，如下面的示例所示："

#~ msgid "Keyboard Entry"
#~ msgstr "键盘项"

#~ msgid ""
#~ "Stores the current contents of the display area in memory register "
#~ "<guilabel>R2</guilabel>."
#~ msgstr ""
#~ "将显示区域的当前内容存储于存储寄存器<guilabel>&ldquo;R2&rdquo;</guilabel>"
#~ "中。"

#~ msgid ""
#~ "Retrieves the current contents of memory register <guilabel>R2</guilabel> "
#~ "into the display area."
#~ msgstr ""
#~ "将存储寄存器<guilabel>&ldquo;R2&rdquo;</guilabel>中的当前内容检索到显示区"
#~ "域中。"

#~ msgid ""
#~ "Exchanges the current value of the display area with the contents of "
#~ "memory register <guilabel>R2</guilabel>."
#~ msgstr ""
#~ "将显示区域的当前内容与存储寄存器<guilabel>&ldquo;R2&rdquo;</guilabel>的内"
#~ "容进行交换。"

#~ msgid "To Display ASCII Values"
#~ msgstr "显示 ASCII 值"

#~ msgid ""
#~ "To display the ASCII value of a character, choose "
#~ "<menuchoice><guimenu>Edit</guimenu><guimenuitem>Insert ASCII Value</"
#~ "guimenuitem></menuchoice>."
#~ msgstr ""
#~ "要显示字符的 ASCII 值，请选择 <menuchoice><guimenu>&ldquo;编辑&rdquo;</"
#~ "guimenu><guimenuitem>&ldquo;插入 ASCII 值&rdquo;</guimenuitem></"
#~ "menuchoice>。"

#~ msgid "The Insert ASCII Value dialog is displayed."
#~ msgstr "即可显示&ldquo;插入 ASCII 值&rdquo;对话框。"

#~ msgid ""
#~ "Enter the required character in the <guilabel>Character</guilabel> field, "
#~ "and click on <guibutton>Insert</guibutton>. The ASCII value of that "
#~ "character, in the current numeric base, appears in the display area. For "
#~ "example, the ASCII value of B in decimal base is 66."
#~ msgstr ""
#~ "在<guilabel>&ldquo;字符&rdquo;</guilabel>字段中输入所需字符，然后单击"
#~ "<guibutton>&ldquo;插入&rdquo;</guibutton>。该字符的 ASCII 值将以当前数值进"
#~ "制显示在显示区域中。例如，&ldquo;B&rdquo;的 ASCII 值以十进制显示为 66。"

#~ msgid ""
#~ "To change to Financial Mode, choose <menuchoice><guimenu>View</"
#~ "guimenu><guimenuitem>Financial Mode</guimenuitem></menuchoice>."
#~ msgstr ""
#~ "要更改为&ldquo;财务模式&rdquo;，请选择 <menuchoice><guimenu>&ldquo;视图"
#~ "&rdquo;</guimenu><guimenuitem>&ldquo;财务模式&rdquo;</guimenuitem></"
#~ "menuchoice>。"

#~ msgid ""
#~ "When you change to Financial Mode, the following Financial Mode buttons "
#~ "are displayed above the Basic Mode buttons:"
#~ msgstr ""
#~ "更改为&ldquo;财务模式&rdquo;后，下列&ldquo;财务模式&rdquo;按钮将显示在"
#~ "&ldquo;基本模式&rdquo;按钮的上方："

#~ msgid "<application>mate-calc</application> Financial Mode Buttons"
#~ msgstr "<application>Calculator</application>&ldquo;财务模式&rdquo;按钮"

#~ msgid "Shows <application>mate-calc</application> Financial Mode buttons."
#~ msgstr ""
#~ "显示 <application>Calculator</application>&ldquo;财务模式&rdquo;按钮。"

#~ msgid ""
#~ "To perform financial calculations, use the buttons described in <xref "
#~ "linkend=\"mate-calc-TBL-financial-calc\"/>."
#~ msgstr ""
#~ "要执行财务运算，请使用 <xref linkend=\"mate-calc-TBL-financial-calc\"/> 中"
#~ "介绍的按钮。"

#~ msgid "Performing Financial Calculations"
#~ msgstr "执行财务运算"

#~ msgid "Compounding Term"
#~ msgstr "复利期间"

#~ msgid "This function uses the following memory registers:"
#~ msgstr "此功能使用下列存储寄存器："

#~ msgid "Register 0"
#~ msgstr "寄存器 0"

#~ msgid "<replaceable>int</replaceable>, the periodic interest rate"
#~ msgstr "<replaceable>int</replaceable>，分期利率"

#~ msgid "Register 1"
#~ msgstr "寄存器 1"

#~ msgid "<replaceable>fv</replaceable>, the future value"
#~ msgstr "<replaceable>fv</replaceable>，终值"

#~ msgid "Register 2"
#~ msgstr "寄存器 2"

#~ msgid "<replaceable>pv</replaceable>, the present value"
#~ msgstr "<replaceable>pv</replaceable>，现值"

#~ msgid ""
#~ "You have just deposited $8000 in an account that pays an annual interest "
#~ "rate of 9%, compounded monthly. Given the annual interest rate, you "
#~ "determine that the monthly interest rate is 0.09 / 12 = 0.0075. To "
#~ "calculate the time period necessary to double your investment, put the "
#~ "following values into the first three memory registers:"
#~ msgstr ""
#~ "您刚刚在一个帐户中存入了 $8000，其年利率为 9%（按月复利计算）。在给定的年"
#~ "利率下，可以算出月利率为 0.09 / 12 = 0.0075。要计算使投资变为两倍的时间期"
#~ "间，请将下列值放入前三个存储寄存器中："

#~ msgid "Click on <guibutton>Ctrm</guibutton>."
#~ msgstr "单击<guibutton>&ldquo;Ctrm&rdquo;</guibutton>。"

#~ msgid "The investment doubles in value in 92.77 months."
#~ msgstr "投资变为原来的两倍需要 92.77 个月的时间。"

#~ msgid "Double-Declining Depreciation"
#~ msgstr "双倍余额递减折旧"

#~ msgid "<replaceable>cost</replaceable>, the amount paid for the asset"
#~ msgstr "<replaceable>原值</replaceable>，资产总支付成本"

#, fuzzy
#~ msgid ""
#~ "<replaceable>salvage</replaceable>, the value of the asset at the end of "
#~ "its life"
#~ msgstr ""
#~ "#-#-#-#-#  zh_CN-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "<replaceable>残值</replaceable>，资产在生命周期结束时的值\n"
#~ "#-#-#-#-#  zh_CN-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "<replaceable>残值</replaceable>，资产在生命周期末的值\n"
#~ "#-#-#-#-#  zh_CN-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "<replaceable>残值</replaceable>，资产在生命周期末的值"

#~ msgid "<replaceable>life</replaceable>, the useful life of the asset"
#~ msgstr "<replaceable>年限</replaceable>，资产使用年限"

#~ msgid "Register 3"
#~ msgstr "寄存器 3"

#~ msgid ""
#~ "<replaceable>period</replaceable>, the time period for depreciation "
#~ "allowance"
#~ msgstr "<replaceable>期间</replaceable>，计算折旧额的时间期间"

#~ msgid ""
#~ "You have just purchased an office machine for $8000. The useful life of "
#~ "this machine is six years. The salvage value after six years is $900. To "
#~ "calculate the depreciation expense for the fourth year, using the double-"
#~ "declining balance method, put the following values into the first four "
#~ "memory registers:"
#~ msgstr ""
#~ "您刚刚购买了一台价值 $8000 的办公用计算机。此计算机的使用年限为六年。六年"
#~ "后的残值为 $900。 要使用双倍余额递减法计算第四年的折旧额，请将下列值放入前"
#~ "四个存储寄存器中："

#~ msgid "Click on <guibutton>Ddb</guibutton>."
#~ msgstr "单击<guibutton>&ldquo;Ddb&rdquo;</guibutton>。"

#~ msgid "The depreciation expense for the fourth year is $790.12."
#~ msgstr "第四年的折旧额为 $790.12。"

#~ msgid "Future Value"
#~ msgstr "终值"

#~ msgid "<replaceable>pmt</replaceable>, the periodic payment"
#~ msgstr "<replaceable>pmt</replaceable>，分期支付额"

#~ msgid "<replaceable>n</replaceable>, the number of periods"
#~ msgstr "<replaceable>n</replaceable>，期间数"

#~ msgid ""
#~ "You plan to deposit $4000 in a bank account on the last day of each year "
#~ "for the next 20 years. The account pays 8% interest, compounded annually. "
#~ "Interest is paid on the last day of each year. To calculate the value of "
#~ "your account in 20 years, put the following values into the first three "
#~ "memory registers:"
#~ msgstr ""
#~ "您计划在未来 20 年内在每年的最后一天向银行存入 $4000。帐户利率为 8%，按年"
#~ "复利计算。利息在每年的最后一天予以支付。 要计算 20 年后您的帐户余额，请将"
#~ "下列值放入前三个存储寄存器中："

#~ msgid "Click on <guibutton>Fv</guibutton>."
#~ msgstr "单击<guibutton>&ldquo;Fv&rdquo;</guibutton>。"

#~ msgid "At the end of 20 years, the value of the account is $183,047.86."
#~ msgstr "在第 20 年末，您的帐户余额为 $183,047.86。"

#~ msgid "Periodic Payment"
#~ msgstr "分期支付"

#~ msgid "<replaceable>prin</replaceable>, the principal"
#~ msgstr "<replaceable>prin</replaceable>，本金"

#~ msgid "<replaceable>n</replaceable>, the term"
#~ msgstr "<replaceable>n</replaceable>，期间"

#~ msgid ""
#~ "You are considering a $120,000 mortgage for 30 years at an annual "
#~ "interest rate of 11.0%. Given the annual interest rate, you determine "
#~ "that the monthly interest rate is 0.11 / 12 = 0.00917. The term is 30 * "
#~ "12 = 360 months. To calculate the monthly repayment for this mortgage, "
#~ "put the following values into the first three memory registers:"
#~ msgstr ""
#~ "您正在考虑一笔为期 30 年、年利率为 11.0%、金额为 $120,000 的抵押贷款。在给"
#~ "定的年利率下， 可以算出月利率为 0.11 / 12 = 0.00917。期间为 30 * 12 = 360 "
#~ "个月。要计算这笔抵押贷款的月支付额，请将下列值放入前三个存储寄存器中："

#~ msgid "Click on <guibutton>Pmt</guibutton>."
#~ msgstr "单击<guibutton>&ldquo;Pmt&rdquo;</guibutton>。"

#~ msgid "The monthly repayment is $1143.15."
#~ msgstr "月支付额为 $1143.15。"

#~ msgid "Present Value"
#~ msgstr "现值"

#~ msgid ""
#~ "You have just won a million dollars. The prize is awarded in 20 annual "
#~ "payments of $50,000 each. Annual payments are received at the end of each "
#~ "year. If you were to accept the annual payments of $50,000, you would "
#~ "invest the money at a rate of 9%, compounded annually."
#~ msgstr ""
#~ "您刚刚赢得一百万美元的奖金。这笔奖金分 20 年支付给您，每年 $50,000。每年的"
#~ "支付在年末进行。假如您每年收到 $50,000，您会将这笔钱按 9% 的年复利进行投"
#~ "资。"

#~ msgid ""
#~ "However, you are given the option of receiving a single lump-sum payment "
#~ "of $400,000 instead of the million dollars annuity. To calculate which "
#~ "option is worth more in today's dollars, put the following values into "
#~ "the first three memory registers:"
#~ msgstr ""
#~ "但是，您现在可以选择一次性接收 $400,000，而不是选择百万美元的年金。 要计算"
#~ "哪种做法按现值美元计算更加合算，请将下列值放入前三个存储寄存器中："

#~ msgid "Click on <guibutton>Pv</guibutton>."
#~ msgstr "单击<guibutton>&ldquo;Pv&rdquo;</guibutton>。"

#~ msgid ""
#~ "The $1,000,000 paid over 20 years is worth $456,427.28 in present dollars."
#~ msgstr "跨 20 年支付的 $1,000,000 合现值美元为 $456,427.28。"

#~ msgid "Periodic Interest Rate"
#~ msgstr "分期利率"

#~ msgid ""
#~ "You have invested $20,000 in a bond. The bond matures in five years, and "
#~ "has a maturity value of $30,000. Interest is compounded monthly. The term "
#~ "is 5 * 12 = 60 months. To calculate the periodic interest rate for this "
#~ "investment, put the following values into the first three memory "
#~ "registers:"
#~ msgstr ""
#~ "您将 $20,000 投资与债券。债券五年后到期，到期值为 $30,000。利息按月复利计"
#~ "算。投资期为 5 * 12 = 60 个月。 要计算此项投资的分期利率，请将下列值放入前"
#~ "三个存储寄存器中："

#~ msgid "Click on <guibutton>Rate</guibutton>."
#~ msgstr "单击<guibutton>&ldquo;Rate&rdquo;</guibutton>。"

#~ msgid ""
#~ "The monthly interest rate is 0.678%. The annual interest rate is 0.678% * "
#~ "12 = 8.14%."
#~ msgstr "月利率为 0.678%。年利率为 0.678% * 12 = 8.14%。"

#~ msgid "Straight-Line Depreciation"
#~ msgstr "直线折旧"

#~ msgid ""
#~ "You have just purchased an office machine for $8000. The useful life of "
#~ "this machine is six years. The salvage value after six years is $900. To "
#~ "calculate the yearly depreciation expense, using the straight-line "
#~ "method, put the following values into the first three memory registers:"
#~ msgstr ""
#~ "您刚刚购买了一台价值 $8000 的办公用计算机。此计算机的使用年限为六年。六年"
#~ "后的残值为 $900。 要使用直线折旧法计算年折旧额，请将下列值放入前三个存储寄"
#~ "存器中："

#~ msgid "Click on <guibutton>Sln</guibutton>."
#~ msgstr "单击<guibutton>&ldquo;Sln&rdquo;</guibutton>。"

#~ msgid "The yearly depreciation expense is $1183.33."
#~ msgstr "年折旧额为 $1183.33。"

#~ msgid "Sum-Of-The-Years'-Digits Depreciation"
#~ msgstr "年数总和折旧"

#~ msgid ""
#~ "You have just purchased an office machine for $8000. The useful life of "
#~ "this machine is six years. The salvage value after six years is $900. To "
#~ "calculate the depreciation expense for the fourth year, using the sum-of-"
#~ "the-years'-digits method, put the following values into the first four "
#~ "memory registers:"
#~ msgstr ""
#~ "您刚刚购买了一台价值 $8000 的办公用计算机。此计算机的使用年限为六年。六年"
#~ "后的残值为 $900。 要使用年数总和法计算第四年的折旧额，请将下列值放入前四个"
#~ "存储寄存器中："

#~ msgid "Click on <guibutton>Syd</guibutton>."
#~ msgstr "单击<guibutton>&ldquo;Syd&rdquo;</guibutton>。"

#~ msgid "The depreciation expense for the fourth year is $1014.29."
#~ msgstr "第四年的折旧额为 $1014.29。"

#~ msgid "Payment Period"
#~ msgstr "支付期间"

#~ msgid ""
#~ "You plan to deposit $1800 in a bank account on the last day of each year. "
#~ "The account pays 11% interest, compounded annually. Interest is paid on "
#~ "the last day of each year. To calculate the time period necessary to "
#~ "accumulate $120,000, put the following values into the first three memory "
#~ "registers:"
#~ msgstr ""
#~ "您计划在每年的最后一天向银行帐户存入 $1800。 帐户利率为 11%，按年复利计"
#~ "算。利息在每年的最后一天予以支付。 要计算累积到 $120,000 所需的时间期间，"
#~ "请将下列值放入前三个存储寄存器中："

#~ msgid "Click on <guibutton>Term</guibutton>."
#~ msgstr "单击<guibutton>&ldquo;Term&rdquo;</guibutton>。"

#~ msgid "$120,000 accumulates in the account in 20.32 years."
#~ msgstr "20.32 年后帐户中会累积到 $120,000。"

#~ msgid "To Perform Scientific Calculations"
#~ msgstr "执行科学运算"

#~ msgid ""
#~ "To change to Scientific Mode, choose <menuchoice><guimenu>View</"
#~ "guimenu><guimenuitem>Scientific Mode</guimenuitem></menuchoice>."
#~ msgstr ""
#~ "要更改为&ldquo;科学模式&rdquo;，请选择 <menuchoice><guimenu>&ldquo;视图"
#~ "&rdquo;</guimenu><guimenuitem>&ldquo;科学模式&rdquo;</guimenuitem></"
#~ "menuchoice>。"

#~ msgid ""
#~ "When you change to Scientific Mode, the following Scientific Mode buttons "
#~ "are displayed above the Basic Mode buttons:"
#~ msgstr ""
#~ "更改为&ldquo;科学模式&rdquo;后，下列&ldquo;科学模式&rdquo;按钮将显示在"
#~ "&ldquo;基本模式&rdquo;按钮的上方："

#~ msgid "<application>mate-calc</application> Scientific Mode Buttons"
#~ msgstr "<application>Calculator</application>&ldquo;科学模式&rdquo;按钮"

#~ msgid "Shows <application>mate-calc</application> Scientific Mode buttons."
#~ msgstr ""
#~ "显示 <application>Calculator</application>&ldquo;科学模式&rdquo;按钮。"

#~ msgid "To Set the Accuracy"
#~ msgstr "设置精度"

#~ msgid ""
#~ "To set the accuracy of the display area and of the memory registers, "
#~ "click on <guibutton>Acc</guibutton>, and select from the popup menu the "
#~ "accuracy level that you require. The current accuracy level is indicated "
#~ "by a preceding black circle in the popup menu. Up to 9 significant places "
#~ "can be displayed. The default accuracy is 9 significant places."
#~ msgstr ""
#~ "要设置显示区域和存储寄存器的精度，请单击<guibutton>&ldquo;Acc&rdquo;</"
#~ "guibutton>，然后从弹出菜单中选择所需的精度级别。当前的精度级别在弹出菜单中"
#~ "以前置的黑色圆圈指示。最多可显示 9 个小数位。默认精度为 9 个小数位。"

#~ msgid ""
#~ "By default, trailing zeroes are not shown. To display trailing zeroes, "
#~ "click on <guibutton>Acc</guibutton> and select <guilabel>Show Trailing "
#~ "Zeroes</guilabel> from the popup menu, or choose "
#~ "<menuchoice><guimenu>View</guimenu><guimenuitem>Show Trailing Zeroes</"
#~ "guimenuitem></menuchoice>. A preceding tick in the <guibutton>Acc</"
#~ "guibutton> popup menu or <guimenu>View</guimenu> menu indicates that the "
#~ "<guilabel>Show Trailing Zeroes</guilabel> option has been selected. To "
#~ "hide trailing zeroes, choose <menuchoice><guimenu>View</"
#~ "guimenu><guimenuitem>Show Trailing Zeroes</guimenuitem></menuchoice> "
#~ "again."
#~ msgstr ""
#~ "默认情况下，末尾不补零。要在末尾补零，请单击<guibutton>&ldquo;Acc&rdquo;</"
#~ "guibutton>，然后从弹出菜单中选择<guilabel>&ldquo;末尾补零&rdquo;</"
#~ "guilabel>，或者选择<menuchoice><guimenu>&ldquo;视图&rdquo;</"
#~ "guimenu><guimenuitem>&ldquo;末尾补零&rdquo;</guimenuitem></menuchoice>。"
#~ "<guibutton>&ldquo;Acc&rdquo;</guibutton>弹出菜单或<guimenu>&ldquo;视图"
#~ "&rdquo;</guimenu>菜单中的前置记号指示<guilabel>&ldquo;末尾补零&rdquo;</"
#~ "guilabel>选项已经选中。要隐藏末尾的零，请再次选择"
#~ "<menuchoice><guimenu>&ldquo;视图&rdquo;</guimenu><guimenuitem>&ldquo;末尾"
#~ "补零&rdquo;</guimenuitem></menuchoice>。"

#~ msgid ""
#~ "The examples in the following table show how the accuracy setting affects "
#~ "<replaceable>x</replaceable> in the display area, when you use decimal "
#~ "base, with the <guimenuitem>Show Trailing Zeroes</guimenuitem> option "
#~ "selected, for the <literal>1 / 8 = <replaceable>x</replaceable></literal> "
#~ "calculation:"
#~ msgstr ""
#~ "下表中的示例显示了精度设置对显示区域中的 <replaceable>x</replaceable> 的影"
#~ "响，当使用十进制并选中了<guimenuitem>&ldquo;末尾补零&rdquo;</guimenuitem>"
#~ "选项时，对于运算 <literal>1 / 8 = <replaceable>x</replaceable></literal>："

#~ msgid "Accuracy"
#~ msgstr "精度"

#~ msgid "1 significant place"
#~ msgstr "1 个小数位"

#~ msgid "2 significant places"
#~ msgstr "2 个小数位"

#~ msgid "3 significant places"
#~ msgstr "3 个小数位"

#~ msgid "To Set the Numeric Base"
#~ msgstr "设置数值进制"

#~ msgid ""
#~ "To set the numeric base, select one of the buttons described in <xref "
#~ "linkend=\"mate-calc-TBL-num-base\"/>."
#~ msgstr ""
#~ "要设置数值进制，请选择 <xref linkend=\"mate-calc-TBL-num-base\"/> 中介绍的"
#~ "按钮之一。"

#~ msgid "Setting the Numeric Base"
#~ msgstr "设置数值进制"

#~ msgid "Binary Base"
#~ msgstr "二进制"

#~ msgid "Sets the numeric base to binary, that is, base 2."
#~ msgstr "将数值进制设置为二进制，即以 2 为底数。"

#~ msgid "Octal Base"
#~ msgstr "八进制"

#~ msgid "Sets the numeric base to octal, that is, base 8."
#~ msgstr "将数值进制设置为八进制，即以 8 为底数。"

#~ msgid "Decimal Base"
#~ msgstr "十进制"

#~ msgid ""
#~ "Sets the numeric base to decimal, that is, base 10. Decimal is the "
#~ "default numeric base. If you change from Scientific Mode to either Basic "
#~ "Mode or Financial Mode, <application>mate-calc</application> "
#~ "automatically sets the numeric base to decimal."
#~ msgstr ""
#~ "将数值进制设置为十进制，即以 10 为底数。十进制为默认数值进制。在从&ldquo;"
#~ "科学模式&rdquo;更改为&ldquo;基本模式&rdquo;或&ldquo;财务模式&rdquo;时，"
#~ "<application>Calculator</application> 会将数值进制自动设置为十进制。"

#~ msgid "Hexadecimal Base"
#~ msgstr "十六进制"

#~ msgid "Sets the numeric base to hexadecimal, that is, base 16."
#~ msgstr "将数值进制设置为十六进制，即以 16 为底数。"

#~ msgid "To Set the Display Type"
#~ msgstr "设置显示类型"

#~ msgid ""
#~ "To set the display type, select one of the buttons described in <xref "
#~ "linkend=\"mate-calc-TBL-display-type\"/>."
#~ msgstr ""
#~ "要设置显示类型，请选择 <xref linkend=\"mate-calc-TBL-display-type\"/> 中介"
#~ "绍的按钮之一。"

#~ msgid "Setting the Display Type"
#~ msgstr "设置显示类型"

#~ msgid "Fixed-Point Display Type"
#~ msgstr "&ldquo;定点&rdquo;显示类型"

#~ msgid ""
#~ "Sets the display type to Fixed-Point format. Results are not displayed in "
#~ "scientific notation. Fixed-Point is the default display type. If you "
#~ "change from Scientific Mode to either Basic Mode or Financial Mode, "
#~ "<application>mate-calc</application> automatically sets the display type "
#~ "to Fixed-Point format."
#~ msgstr ""
#~ "将显示类型设置为&ldquo;定点&rdquo;格式。结果不以科学计数法显示。&ldquo;定"
#~ "点&rdquo;为默认显示类型。在从&ldquo;科学模式&rdquo;更改为&ldquo;基本模式"
#~ "&rdquo;或&ldquo;财务模式&rdquo;时，<application>Calculator</application> "
#~ "会将显示类型自动设置为&ldquo;定点&rdquo;格式。"

#~ msgid "Scientific Display Type"
#~ msgstr "&ldquo;科学&rdquo;显示类型"

#~ msgid ""
#~ "Sets the display type to Scientific format. Results are displayed in "
#~ "scientific notation, with a fixed number of numeric digits."
#~ msgstr ""
#~ "将显示类型设置为&ldquo;科学&rdquo;格式。结果以科学计数法显示，数字位数固"
#~ "定。"

#~ msgid "To Set the Trigonometric Type"
#~ msgstr "设置三角类型"

#~ msgid ""
#~ "To set the trigonometric type, select one of the buttons described in "
#~ "<xref linkend=\"mate-calc-TBL-trig-type\"/>."
#~ msgstr ""
#~ "要设置三角类型，请选择 <xref linkend=\"mate-calc-TBL-trig-type\"/> 中介绍"
#~ "的按钮之一。"

#~ msgid "Setting the Trigonometric Type"
#~ msgstr "设置三角类型"

#~ msgid "Degrees"
#~ msgstr "角度"

#~ msgid ""
#~ "Sets the trigonometric type to Degrees. Degrees is the default "
#~ "trigonometric type."
#~ msgstr ""
#~ "将三角类型设置为&ldquo;角度&rdquo;。&ldquo;角度&rdquo;为默认的三角类型。"

#~ msgid "Gradients"
#~ msgstr "梯度"

#~ msgid "Sets the trigonometric type to Gradients."
#~ msgstr "将三角类型设置为&ldquo;梯度&rdquo;。"

#~ msgid "Radians"
#~ msgstr "弧度"

#~ msgid "Sets the trigonometric type to Radians."
#~ msgstr "将三角类型设置为&ldquo;弧度&rdquo;。"

#~ msgid "To Set the Trigonometric Options"
#~ msgstr "设置三角选项"

#~ msgid ""
#~ "To set the trigonometric options, use the options described in <xref "
#~ "linkend=\"mate-calc-TBL-trig-options\"/>."
#~ msgstr ""
#~ "要设置三角选项，请使用 <xref linkend=\"mate-calc-TBL-trig-options\"/> 中介"
#~ "绍的选项。"

#~ msgid "Setting the Trigonometric Options"
#~ msgstr "设置三角选项"

#~ msgid ""
#~ "Selects the hyperbolic option for use with the trigonometric functions."
#~ msgstr "选择用于三角函数的双曲线选项。"

#~ msgid "Inverse Option Indicator"
#~ msgstr "反转选项指示器"

#~ msgid "Selects the inverse option for use with the trigonometric functions."
#~ msgstr "选择用于三角函数的反转选项。"

#~ msgid ""
#~ "By default, the options described in <xref linkend=\"mate-calc-TBL-trig-"
#~ "options\"/> are not selected. Click <guibutton>Clr</guibutton> to "
#~ "deselect these options."
#~ msgstr ""
#~ "默认情况下，<xref linkend=\"mate-calc-TBL-trig-options\"/> 中介绍的选项处"
#~ "于非选中状态。单击<guibutton>&ldquo;Clr&rdquo;</guibutton>可取消对这些选项"
#~ "的选择。"

#~ msgid "To Calculate Trigonometric Values"
#~ msgstr "计算三角值"

#~ msgid ""
#~ "To calculate trigonometric values, use the buttons described in <xref "
#~ "linkend=\"mate-calc-TBL-trig-calc\"/>."
#~ msgstr ""
#~ "要计算三角值，请使用 <xref linkend=\"mate-calc-TBL-trig-calc\"/> 中介绍的"
#~ "选项。"

#~ msgid "Calculating Trigonometric Values"
#~ msgstr "计算三角值"

#~ msgid "Cosine <literal>cos</literal>"
#~ msgstr "余弦 <literal>cos</literal>"

#~ msgid ""
#~ "<guibutton>Cos</guibutton>, <guilabel>Hyp</guilabel> option not selected, "
#~ "<guilabel>Inv</guilabel> option not selected"
#~ msgstr ""
#~ "<guibutton>&ldquo;Cos&rdquo;</guibutton>、<guilabel>&ldquo;Hyp&rdquo;</"
#~ "guilabel> 选项处于非选中状态，<guilabel>&ldquo;Inv&rdquo;</guilabel>选项处"
#~ "于非选中状态"

#~ msgid "Calculates the cosine of the current value in the display area."
#~ msgstr "计算显示区域中的当前值的余弦。"

#~ msgid "Arc Cosine <literal>acos</literal>"
#~ msgstr "反余弦 <literal>acos</literal>"

#~ msgid ""
#~ "<guibutton>Cos</guibutton>, <guilabel>Hyp</guilabel> option not selected, "
#~ "<guilabel>Inv</guilabel> option selected"
#~ msgstr ""
#~ "<guibutton>&ldquo;Cos&rdquo;</guibutton>、<guilabel>&ldquo;Hyp&rdquo;</"
#~ "guilabel> 选项处于非选中状态，<guilabel>&ldquo;Inv&rdquo;</guilabel>选项处"
#~ "于选中状态"

#~ msgid "Calculates the arc cosine of the current value in the display area."
#~ msgstr "计算显示区域中的当前值的反余弦。"

#~ msgid "Hyperbolic Cosine <literal>cosh</literal>"
#~ msgstr "双曲余弦 <literal>cosh</literal>"

#~ msgid ""
#~ "<guibutton>Cos</guibutton>, <guilabel>Hyp</guilabel> option selected, "
#~ "<guilabel>Inv</guilabel> option not selected"
#~ msgstr ""
#~ "<guibutton>&ldquo;Cos&rdquo;</guibutton>、<guilabel>&ldquo;Hyp&rdquo;</"
#~ "guilabel> 选项处于选中状态，<guilabel>&ldquo;Inv&rdquo;</guilabel>选项处于"
#~ "非选中状态"

#~ msgid ""
#~ "Calculates the hyperbolic cosine of the current value in the display area."
#~ msgstr "计算显示区域中的当前值的双曲余弦。"

#~ msgid "Arc Hyperbolic Cosine <literal>acosh</literal>"
#~ msgstr "反双曲余弦 <literal>acosh</literal>"

#~ msgid ""
#~ "<guibutton>Cos</guibutton>, <guilabel>Hyp</guilabel> option selected, "
#~ "<guilabel>Inv</guilabel> option selected"
#~ msgstr ""
#~ "<guibutton>&ldquo;Cos&rdquo;</guibutton>、<guilabel>&ldquo;Hyp&rdquo;</"
#~ "guilabel> 选项处于选中状态，<guilabel>&ldquo;Inv&rdquo;</guilabel>选项处于"
#~ "选中状态"

#~ msgid ""
#~ "Calculates the arc hyperbolic cosine of the current value in the display "
#~ "area."
#~ msgstr "计算显示区域中的当前值的反双曲余弦。"

#~ msgid "Sine <literal>sin</literal>"
#~ msgstr "正弦 <literal>sin</literal>"

#~ msgid ""
#~ "<guibutton>Sin</guibutton>, <guilabel>Hyp</guilabel> option not selected, "
#~ "<guilabel>Inv</guilabel> option not selected"
#~ msgstr ""
#~ "<guibutton>&ldquo;Sin&rdquo;</guibutton>、<guilabel>&ldquo;Hyp&rdquo;</"
#~ "guilabel> 选项处于非选中状态，<guilabel>&ldquo;Inv&rdquo;</guilabel>选项处"
#~ "于非选中状态"

#~ msgid "Calculates the sine of the current value in the display area."
#~ msgstr "计算显示区域中的当前值的正弦。"

#~ msgid "Arc Sine <literal>asin</literal>"
#~ msgstr "反正弦 <literal>asin</literal>"

#~ msgid ""
#~ "<guibutton>Sin</guibutton>, <guilabel>Hyp</guilabel> option not selected, "
#~ "<guilabel>Inv</guilabel> option selected"
#~ msgstr ""
#~ "<guibutton>&ldquo;Sin&rdquo;</guibutton>、<guilabel>&ldquo;Hyp&rdquo;</"
#~ "guilabel> 选项处于非选中状态，<guilabel>&ldquo;Inv&rdquo;</guilabel>选项处"
#~ "于选中状态"

#~ msgid "Calculates the arc sine of the current value in the display area."
#~ msgstr "计算显示区域中的当前值的反正弦。"

#~ msgid "Hyperbolic Sine <literal>sinh</literal>"
#~ msgstr "双曲正弦 <literal>sinh</literal>"

#~ msgid ""
#~ "<guibutton>Sin</guibutton>, <guilabel>Hyp</guilabel> option selected, "
#~ "<guilabel>Inv</guilabel> option not selected"
#~ msgstr ""
#~ "<guibutton>&ldquo;Sin&rdquo;</guibutton>、<guilabel>&ldquo;Hyp&rdquo;</"
#~ "guilabel> 选项处于选中状态，<guilabel>&ldquo;Inv&rdquo;</guilabel>选项处于"
#~ "非选中状态"

#~ msgid ""
#~ "Calculates the hyperbolic sine of the current value in the display area."
#~ msgstr "计算显示区域中的当前值的双曲正弦。"

#~ msgid "Arc Hyperbolic Sine <literal>asinh</literal>"
#~ msgstr "反双曲正弦 <literal>asinh</literal>"

#~ msgid ""
#~ "<guibutton>Sin</guibutton>, <guilabel>Hyp</guilabel> option selected, "
#~ "<guilabel>Inv</guilabel> option selected"
#~ msgstr ""
#~ "<guibutton>&ldquo;Sin&rdquo;</guibutton>、<guilabel>&ldquo;Hyp&rdquo;</"
#~ "guilabel> 选项处于选中状态，<guilabel>&ldquo;Inv&rdquo;</guilabel>选项处于"
#~ "选中状态"

#~ msgid ""
#~ "Calculates the arc hyperbolic sine of the current value in the display "
#~ "area."
#~ msgstr "计算显示区域中的当前值的反双曲正弦。"

#~ msgid "Tangent <literal>tan</literal>"
#~ msgstr "正切 <literal>tan</literal>"

#~ msgid ""
#~ "<guibutton>Tan</guibutton>, <guilabel>Hyp</guilabel> option not selected, "
#~ "<guilabel>Inv</guilabel> option not selected"
#~ msgstr ""
#~ "<guibutton>&ldquo;Tan&rdquo;</guibutton>、<guilabel>&ldquo;Hyp&rdquo;</"
#~ "guilabel> 选项处于非选中状态，<guilabel>&ldquo;Inv&rdquo;</guilabel>选项处"
#~ "于非选中状态"

#~ msgid "Calculates the tangent of the current value in the display area."
#~ msgstr "计算显示区域中的当前值的正切。"

#~ msgid "Arc Tangent <literal>atan</literal>"
#~ msgstr "反正切 <literal>atan</literal>"

#~ msgid ""
#~ "<guibutton>Tan</guibutton>, <guilabel>Hyp</guilabel> option not selected, "
#~ "<guilabel>Inv</guilabel> option selected"
#~ msgstr ""
#~ "<guibutton>&ldquo;Tan&rdquo;</guibutton>、<guilabel>&ldquo;Hyp&rdquo;</"
#~ "guilabel> 选项处于非选中状态，<guilabel>&ldquo;Inv&rdquo;</guilabel>选项处"
#~ "于选中状态"

#~ msgid "Calculates the arc tangent of the current value in the display area."
#~ msgstr "计算显示区域中的当前值的反正切。"

#~ msgid "Hyperbolic Tangent <literal>tanh</literal>"
#~ msgstr "双曲正切 <literal>tanh</literal>"

#~ msgid ""
#~ "<guibutton>Tan</guibutton>, <guilabel>Hyp</guilabel> option selected, "
#~ "<guilabel>Inv</guilabel> option not selected"
#~ msgstr ""
#~ "<guibutton>&ldquo;Tan&rdquo;</guibutton>、<guilabel>&ldquo;Hyp&rdquo;</"
#~ "guilabel> 选项处于选中状态，<guilabel>&ldquo;Inv&rdquo;</guilabel>选项处于"
#~ "非选中状态"

#~ msgid ""
#~ "Calculates the hyperbolic tangent of the current value in the display "
#~ "area."
#~ msgstr "计算显示区域中的当前值的双曲正切。"

#~ msgid "Arc Hyperbolic Tangent <literal>atanh</literal>"
#~ msgstr "反双曲正切 <literal>atanh</literal>"

#~ msgid ""
#~ "<guibutton>Tan</guibutton>, <guilabel>Hyp</guilabel> option selected, "
#~ "<guilabel>Inv</guilabel> option selected"
#~ msgstr ""
#~ "<guibutton>&ldquo;Tan&rdquo;</guibutton>、<guilabel>&ldquo;Hyp&rdquo;</"
#~ "guilabel> 选项处于选中状态，<guilabel>&ldquo;Inv&rdquo;</guilabel>选项处于"
#~ "选中状态"

#~ msgid ""
#~ "Calculates the arc hyperbolic tangent of the current value in the display "
#~ "area."
#~ msgstr "计算显示区域中的当前值的反双曲正切。"

#~ msgid "To Calculate Logarithms"
#~ msgstr "计算对数"

#~ msgid ""
#~ "To calculate logarithms, use the buttons described in <xref linkend="
#~ "\"mate-calc-TBL-logs-calc\"/>."
#~ msgstr ""
#~ "要计算对数，请使用 <xref linkend=\"mate-calc-TBL-logs-calc\"/> 中介绍的按"
#~ "钮。"

#~ msgid "Calculating Logarithms"
#~ msgstr "计算对数"

#~ msgid "Common Logarithm Base 10"
#~ msgstr "常用对数（以 10 为底）"

#~ msgid ""
#~ "Calculates the common logarithm of the current value in the display area."
#~ msgstr "计算显示区域中的当前值的常用对数。"

#~ msgid ""
#~ "Common antilogarithm and natural antilogarithm are not supported in this "
#~ "version of <application>mate-calc</application>."
#~ msgstr ""
#~ "此版本 <application>Calculator</application> 不支持常用对数和自然对数。"

#~ msgid "To Perform Logical Calculations"
#~ msgstr "执行逻辑运算"

#~ msgid ""
#~ "To perform logical calculations, use the buttons described in <xref "
#~ "linkend=\"mate-calc-TBL-logic-calc\"/>."
#~ msgstr ""
#~ "要执行逻辑运算，请使用 <xref linkend=\"mate-calc-TBL-logic-calc\"/> 中介绍"
#~ "的按钮。"

#~ msgid "Performing Logical Calculations"
#~ msgstr "执行逻辑运算"

#~ msgid "Logical OR"
#~ msgstr "逻辑 OR"

#~ msgid ""
#~ "Performs a logical OR operation on the current value in the display area "
#~ "and the next number that you enter, treating both numbers as unsigned "
#~ "long integers."
#~ msgstr ""
#~ "对显示区域中的当前值和输入的下一个数字执行逻辑 OR 运算， 将这两个数字都作"
#~ "为无符号长整数处理。"

#~ msgid "Logical AND"
#~ msgstr "逻辑 AND"

#~ msgid ""
#~ "Performs a logical AND operation on the current value in the display area "
#~ "and the next number that you enter, treating both numbers as unsigned "
#~ "long integers."
#~ msgstr ""
#~ "对显示区域中的当前值和输入的下一个数字执行逻辑 AND 运算， 将这两个数字都作"
#~ "为无符号长整数处理。"

#~ msgid "Logical NOT"
#~ msgstr "逻辑 NOT"

#~ msgid ""
#~ "Performs a logical NOT operation on the current value in the display "
#~ "area, treating the number as an unsigned long integer."
#~ msgstr ""
#~ "对显示区域中的当前值执行逻辑 NOT 运算，将该数字作为无符号长整数处理。"

#~ msgid "Logical XOR"
#~ msgstr "逻辑 XOR"

#~ msgid ""
#~ "Performs a logical XOR operation on the current value in the display area "
#~ "and the next number that you enter, treating both numbers as unsigned "
#~ "long integers."
#~ msgstr ""
#~ "对显示区域中的当前值和输入的下一个数字执行逻辑 XOR 运算， 将这两个数字都作"
#~ "为无符号长整数处理。"

#~ msgid "Logical XNOR"
#~ msgstr "逻辑 XNOR"

#~ msgid ""
#~ "Performs a logical XNOR operation on the current value in the display "
#~ "area and the next number that you enter, treating both numbers as "
#~ "unsigned long integers."
#~ msgstr ""
#~ "对显示区域中的当前值和输入的下一个数字执行逻辑 XNOR 运算， 将这两个数字都"
#~ "作为无符号长整数处理。"

#~ msgid "To Enter Exponential Numbers"
#~ msgstr "输入幂指数"

#~ msgid ""
#~ "To enter exponential numbers, use the <guibutton>Exp</guibutton> button."
#~ msgstr "要输入幂指数，请使用<guibutton>&ldquo;Exp&rdquo;</guibutton>按钮。"

#~ msgid ""
#~ "The <guibutton>Exp</guibutton> button enables you to enter numbers in "
#~ "scientific notation, that is, <replaceable>mantissa</replaceable> * "
#~ "10<superscript><replaceable>exponent</replaceable></superscript>. The "
#~ "current non-zero value in the display area is the mantissa. If the "
#~ "current value in the display area is zero, the mantissa is 1.0. The next "
#~ "number that you enter is the exponent."
#~ msgstr ""
#~ "<guibutton>&ldquo;Exp&rdquo;</guibutton>按钮使您可以以科学计数法输入数字，"
#~ "即<replaceable>尾数</replaceable> * 10<superscript><replaceable>指数</"
#~ "replaceable></superscript>。显示区域中当前的非零值为尾数。如果显示区域中的"
#~ "当前值为零，则尾数为 1.0。您输入的下一个数字为指数。"

#~ msgid ""
#~ "When you click on <guibutton>Exp</guibutton>, the calculator displays "
#~ "<literal>. +</literal> to represent 10 to the power of the next number "
#~ "that you enter. To change the sign of the number, use the <guibutton>+/-</"
#~ "guibutton> button in the last action of the operation, as shown in the "
#~ "following example:"
#~ msgstr ""
#~ "单击<guibutton>&ldquo;Exp&rdquo;</guibutton>后，计算器显示 <literal>。+</"
#~ "literal>，代表以 10 为底、以输入的下一个数字为幂的幂指数。要更改数字的符"
#~ "号，请在运算的最后一步操作中使用<guibutton>&ldquo;+/-&rdquo;</guibutton>按"
#~ "钮，如下面的示例所示："

#~ msgid "Keypad Entry"
#~ msgstr "键盘项"

#~ msgid "Calculator Display"
#~ msgstr "计算器显示"

#~ msgid ""
#~ "To enter a number in exponential format, use the guidelines in the "
#~ "following table:"
#~ msgstr "要输入一个幂指数格式的数字，请遵循下表中的指导："

#~ msgid "Enter"
#~ msgstr "输入"

#~ msgid "Number Displayed"
#~ msgstr "显示的数字"

#~ msgid "To Use Constant Values"
#~ msgstr "使用常数值"

#~ msgid ""
#~ "Click on <guibutton>Con</guibutton> to display the list of defined "
#~ "constant values. All constant values are specified in decimal numeric "
#~ "base, even if the current numeric base is not decimal."
#~ msgstr ""
#~ "单击<guibutton>&ldquo;Con&rdquo;</guibutton>显示定义的常数值的列表。所有常"
#~ "数值都以十进制指定，即使当前数值进制不是十进制亦如此。"

#~ msgid ""
#~ "Select a constant from the menu to enter its value in the display area. "
#~ "If you use the keyboard shortcut <keycap>#</keycap>, you can use the "
#~ "keyboard to specify the constant, as shown in the following example:"
#~ msgstr ""
#~ "从菜单中选择一个常数，将其值输入显示区域中。如果使用键盘快捷键 <keycap>#</"
#~ "keycap>，则可以使用该键盘指定该常数，如下面的示例所示："

#~ msgid "Constant"
#~ msgstr "常数"

#~ msgid ""
#~ "The <application>mate-calc</application> application provides ten default "
#~ "constant values, as described in the following table:"
#~ msgstr ""
#~ "<application>Calculator</application> 应用程序提供了十个默认常数值，如下表"
#~ "所述："

#~ msgid "kilometers per hour or miles per hour"
#~ msgstr "公里每小时或英里每小时"

#~ msgid ""
#~ "Multiply the current value in the display area by this constant, to "
#~ "convert from kilometers per hour to miles per hour. For example, 8 * "
#~ "<guibutton>Con</guibutton><guilabel>C0</guilabel><keycap>=</keycap> 5."
#~ msgstr ""
#~ "将显示区域中的当前值与此常数相乘，将公里每小时转换成英里每小时。例如，8 * "
#~ "<guibutton>Con</guibutton><guilabel>C0</guilabel><keycap>=</keycap> 5。"

#~ msgid ""
#~ "Divide the current value in the display area by this constant, to convert "
#~ "from miles per hour to kilometers per hour. For example, 5 / "
#~ "<guibutton>Con</guibutton><guilabel>C0</guilabel><keycap>=</keycap> 8."
#~ msgstr ""
#~ "用显示区域中的当前值除以此常量，将英里每小时转换成公里每小时。例如 5 / "
#~ "<guibutton>Con</guibutton><guilabel>C0</guilabel><keycap>=</keycap> 8。"

#~ msgid "square root of 2"
#~ msgstr "2 的平方根"

#~ msgid ""
#~ "Multiply the current value in the display area by this constant, to "
#~ "convert from centimeters to inches. For example, 30 * <guibutton>Con</"
#~ "guibutton><guilabel>C4</guilabel><keycap>=</keycap> 12."
#~ msgstr ""
#~ "将显示区域中的当前值与此常数相乘，将厘米转换成英寸。例如，30 * "
#~ "<guibutton>Con</guibutton><guilabel>C4</guilabel><keycap>=</keycap> 12。"

#~ msgid ""
#~ "Divide the current value in the display area by this constant, to convert "
#~ "from inches to centimeters. For example, 12 / <guibutton>Con</"
#~ "guibutton><guilabel>C4</guilabel><keycap>=</keycap> 30."
#~ msgstr ""
#~ "用显示区域中的当前值除以此常量，将英寸转换成厘米。例如，12 / "
#~ "<guibutton>Con</guibutton><guilabel>C4</guilabel><keycap>=</keycap> 30。"

#~ msgid "degrees in a radian"
#~ msgstr "弧度中的角度"

#~ msgid "grams or ounces"
#~ msgstr "克或盎司"

#~ msgid ""
#~ "Multiply the current value in the display area by this constant, to "
#~ "convert from grams to ounces. For example, 500 * <guibutton>Con</"
#~ "guibutton><guilabel>C7</guilabel><keycap>=</keycap> 18."
#~ msgstr ""
#~ "将显示区域中的当前值与此常数相乘，将克转换成盎司。例如，500 * "
#~ "<guibutton>Con</guibutton><guilabel>C7</guilabel><keycap>=</keycap> 18。"

#~ msgid ""
#~ "Divide the current value in the display area by this constant, to convert "
#~ "from ounces to grams. For example, 18 / <guibutton>Con</"
#~ "guibutton><guilabel>C7</guilabel><keycap>=</keycap> 500."
#~ msgstr ""
#~ "用显示区域中的当前值除以此常数，将盎司转换成克。例如，18 / "
#~ "<guibutton>Con</guibutton><guilabel>C7</guilabel><keycap>=</keycap> 500。"

#~ msgid "kilojoules or British thermal units"
#~ msgstr "千焦耳或英热单位"

#~ msgid ""
#~ "Multiply the current value in the display area by this constant, to "
#~ "convert from kilojoules to British thermal units. For example, 10 * "
#~ "<guibutton>Con</guibutton><guilabel>C8</guilabel><keycap>=</keycap> 9.48."
#~ msgstr ""
#~ "将显示区域中的当前值与此常数相乘，将千焦耳转换成英热单位。例如，10 * "
#~ "<guibutton>Con</guibutton><guilabel>C8</guilabel><keycap>=</keycap> 9.48。"

#~ msgid ""
#~ "Divide the current value in the display area by this constant, to convert "
#~ "from British thermal units to kilojoules. For example, 9.48 / "
#~ "<guibutton>Con</guibutton><guilabel>C8</guilabel><keycap>=</keycap> 10."
#~ msgstr ""
#~ "用显示区域中的当前值除以此常数，将英热单位转换成千焦耳。例如，9.48 / "
#~ "<guibutton>Con</guibutton><guilabel>C8</guilabel><keycap>=</keycap> 10。"

#~ msgid "cubic centimeters or cubic inches"
#~ msgstr "立方厘米或立方英寸"

#~ msgid ""
#~ "Multiply the current value in the display area by this constant, to "
#~ "convert from cubic centimeters to cubic inches. For example, 100 * "
#~ "<guibutton>Con</guibutton><guilabel>C9</guilabel><keycap>=</keycap> 6.10."
#~ msgstr ""
#~ "将显示区域中的当前值与此常数相乘，将立方厘米转换成立方英寸。例如，100 * "
#~ "<guibutton>Con</guibutton><guilabel>C9</guilabel><keycap>=</keycap> 6.10。"

#~ msgid ""
#~ "Divide the current value in the display area by this constant, to convert "
#~ "from cubic inches to cubic centimeters. For example, 6.10 / "
#~ "<guibutton>Con</guibutton><guilabel>C9</guilabel><keycap>=</keycap> 100."
#~ msgstr ""
#~ "用显示区域中的当前值除以此常数，将立方英寸转换成立方厘米。例如，6.10 / "
#~ "<guibutton>Con</guibutton><guilabel>C9</guilabel><keycap>=</keycap> 100。"

#~ msgid ""
#~ "You cannot add new constants in this version of <application>mate-calc</"
#~ "application>. However, you can overwrite the default constants to store "
#~ "your own constants."
#~ msgstr ""
#~ "在此版本的 <application>Calculator</application> 中，您不可以添加新常数。"
#~ "然而，在存储自己的常数时可能会覆盖默认常数。"

#~ msgid ""
#~ "To store a new constant or edit an existing constant, perform the "
#~ "following steps:"
#~ msgstr "要存储新常数或编辑现存常数，请执行下列步骤："

#~ msgid ""
#~ "Click on <guibutton>Con</guibutton> and select <guilabel>Edit Constants</"
#~ "guilabel> from the popup menu."
#~ msgstr ""
#~ "单击<guibutton>&ldquo;Con&rdquo;</guibutton>，然后从弹出菜单中选择"
#~ "<guilabel>&ldquo;编辑常数&rdquo;</guilabel>。"

#~ msgid ""
#~ "In the <guilabel>Edit Constants</guilabel> window, select the constant "
#~ "that you want to overwrite or edit."
#~ msgstr ""
#~ "在<guilabel>&ldquo;编辑常数&rdquo;</guilabel>窗口中，选择要覆盖或编辑的常"
#~ "数。"

#~ msgid "Click on the Value field, and enter the new value."
#~ msgstr "单击&ldquo;值&rdquo;字段，然后输入新值。"

#~ msgid "Click on the Description field, and enter the new description."
#~ msgstr "单击&ldquo;说明&rdquo;字段，然后输入新的说明。"

#~ msgid ""
#~ "Click <guibutton>OK</guibutton> to save your changes and close the "
#~ "<guilabel>Edit Constants</guilabel> window."
#~ msgstr ""
#~ "单击<guibutton>&ldquo;确定&rdquo;</guibutton>，保存所作的更改并关闭"
#~ "<guilabel>&ldquo;编辑常数&rdquo;</guilabel>窗口。"

#~ msgid "To Use Functions"
#~ msgstr "使用函数"

#~ msgid ""
#~ "To show the available functions, click on <guibutton>Fun</guibutton>. A "
#~ "popup menu displays the list of defined functions. Select a function from "
#~ "the menu to run that function. If the function is not defined, the value "
#~ "zero is returned."
#~ msgstr ""
#~ "要显示可用函数，请单击<guibutton>&ldquo;Fun&rdquo;</guibutton>。在一个弹出"
#~ "菜单中会显示已定义函数的列表。从菜单中选择一个函数以运行该函数。如果该函数"
#~ "未定义，将返回值 0。"

#~ msgid ""
#~ "If you use the keyboard shortcut <keycap>F</keycap>, you can use the "
#~ "keyboard to specify the function, as shown in the following example:"
#~ msgstr ""
#~ "如果使用键盘快捷键 <keycap>F</keycap>，则可以使用该键盘指定该函数，如下面"
#~ "的示例所示："

#~ msgid "F3"
#~ msgstr "F3 键"

#~ msgid ""
#~ "The <application>mate-calc</application> application does not provide any "
#~ "default functions. You can store up to ten functions."
#~ msgstr ""
#~ "<application>Calculator</application> 应用程序没有提供任何默认函数。您最多"
#~ "可以存储十个函数。"

#~ msgid ""
#~ "To store a new function or edit an existing function, perform the "
#~ "following steps:"
#~ msgstr "要存储新函数或编辑现存函数，请执行下列步骤："

#~ msgid ""
#~ "Click on <guibutton>Fun</guibutton> and select <guilabel>Edit Functions</"
#~ "guilabel> from the popup menu."
#~ msgstr ""
#~ "单击<guibutton>&ldquo;Fun&rdquo;</guibutton>，然后从弹出菜单中选择"
#~ "<guilabel>&ldquo;编辑函数&rdquo;</guilabel>。"

#~ msgid ""
#~ "In the <guilabel>Edit Functions</guilabel> window, select a blank entry, "
#~ "or the function that you want to overwrite."
#~ msgstr ""
#~ "在<guilabel>&ldquo;编辑函数&rdquo;</guilabel>窗口中，选择一个空项，或者选"
#~ "择要覆盖的函数。"

#~ msgid ""
#~ "Click on the Value field, and enter the new value. Use the keyboard "
#~ "shortcuts to invoke a <application>mate-calc</application> button. For "
#~ "example, enter <literal>90K</literal> to calculate sine(90)."
#~ msgstr ""
#~ "单击&ldquo;值&rdquo;字段，然后输入新值。使用键盘快捷键调用 "
#~ "<application>Calculator</application> 按钮。例如，输入 <literal>90K</"
#~ "literal> 计算 sine(90)。"

#~ msgid ""
#~ "Click on the Description field, and enter the new description. For "
#~ "example, <literal>Sine 90</literal>."
#~ msgstr ""
#~ "单击&ldquo;说明&rdquo;字段，然后输入新的说明。例如，<literal>Sine 90</"
#~ "literal>。"

#~ msgid ""
#~ "Click <guibutton>OK</guibutton> to save your changes and close the "
#~ "<guilabel>Edit Functions</guilabel> window."
#~ msgstr ""
#~ "单击<guibutton>&ldquo;确定&rdquo;</guibutton>，保存所作的更改并关闭"
#~ "<guilabel>&ldquo;编辑函数&rdquo;</guilabel>窗口。"

#~ msgid "To Manipulate Binary Numbers"
#~ msgstr "处理二进制数字"

#~ msgid ""
#~ "To manipulate binary numbers, use the buttons described in <xref linkend="
#~ "\"mate-calc-TBL-num-manip\"/>."
#~ msgstr ""
#~ "要处理二进制数字，请使用 <xref linkend=\"mate-calc-TBL-num-manip\"/> 中介"
#~ "绍的按钮。"

#~ msgid "Manipulating Binary Numbers"
#~ msgstr "处理二进制数字"

#~ msgid "Left Shift <replaceable>n</replaceable>"
#~ msgstr "左移 <replaceable>n</replaceable>"

#~ msgid ""
#~ "Shifts the current unsigned 32-bit binary value in the display area, the "
#~ "specified number of places to the left. Click on <guibutton>&lt;</"
#~ "guibutton>, and select the number of shift places from the popup menu. "
#~ "The number can be shifted up to 15 places left."
#~ msgstr ""
#~ "将显示区域中当前的无符号 32 位二进制值向左移动指定的位数。单击 "
#~ "<guibutton>&lt;</guibutton>，然后从弹出菜单中选择移动的位数。最多可以向左"
#~ "移动 15 位。"

#~ msgid "111 <guibutton>&lt;</guibutton><guilabel>1 place</guilabel>"
#~ msgstr "111 <guibutton>&lt;</guibutton><guilabel>1 位</guilabel>"

#~ msgid "Right Shift <replaceable>n</replaceable>"
#~ msgstr "右移 <replaceable>n</replaceable>"

#~ msgid ""
#~ "Shifts the current unsigned 32-bit binary value in the display area, the "
#~ "specified number of places to the right. Click on <guibutton>&gt;</"
#~ "guibutton>, and select the number of shift places from the popup menu. "
#~ "The number can be shifted up to 15 places right."
#~ msgstr ""
#~ "将显示区域中当前的无符号 32 位二进制值向右移动指定的位数。单击 "
#~ "<guibutton>&gt;</guibutton>，然后从弹出菜单中选择移动的位数。最多可以向右"
#~ "移动 15 位。"

#~ msgid "1011 <guibutton>&gt;</guibutton><guilabel>1 place</guilabel>"
#~ msgstr "1011 <guibutton>&gt;</guibutton><guilabel>1 位</guilabel>"

#~ msgid "Get a 16-Bit Unsigned Integer"
#~ msgstr "获取 16 位无符号整数"

#~ msgid ""
#~ "Truncates the current value in the display area and returns a 16-bit "
#~ "unsigned integer."
#~ msgstr "截断显示区域中的当前值，返回一个 16 位无符号整数。"

#~ msgid "Get a 32-Bit Unsigned Integer"
#~ msgstr "获取 32 位无符号整数"

#~ msgid ""
#~ "Truncates the current value in the display area and returns a 32-bit "
#~ "unsigned integer."
#~ msgstr "截断显示区域中的当前值，返回一个 32 位无符号整数。"

#~ msgid ""
#~ "If you use keyboard shortcuts, you can use the keyboard to specify the "
#~ "number of places to shift, as shown in the following examples:"
#~ msgstr ""
#~ "如果使用键盘快捷键，则可以使用键盘指定移动的位数，如下面的示例所示："

#~ msgid ""
#~ "Shifts the current binary value in the display area 4 places to the left."
#~ msgstr "将显示区域中当前的二进制值向左移动 4 位。"

#~ msgid ""
#~ "Shifts the current binary value in the display area 4 places to the right."
#~ msgstr "将显示区域中当前的二进制值向右移动 4 位。"

#~ msgid "To Perform Miscellaneous Scientific Calculations"
#~ msgstr "执行杂项科学运算"

#~ msgid ""
#~ "To calculate miscellaneous scientific calculations, use the buttons "
#~ "described in <xref linkend=\"mate-calc-TBL-misc-calc\"/>."
#~ msgstr ""
#~ "要计算杂项科学运算，请使用 <xref linkend=\"mate-calc-TBL-misc-calc\"/> 中"
#~ "介绍的按钮。"

#~ msgid "Performing Miscellaneous Scientific Calculations"
#~ msgstr "执行杂项科学运算"

#~ msgid "Parentheses"
#~ msgstr "圆括号"

#~ msgid "<guibutton>(</guibutton> and <guibutton>)</guibutton>"
#~ msgstr ""
#~ "<guibutton>&ldquo;(&rdquo;</guibutton>和<guibutton>&ldquo;)&rdquo;</"
#~ "guibutton>"

#~ msgid ""
#~ "Provide precedence in arithmetic calculations. Calculations within "
#~ "parentheses are performed first. If parentheses are not used, arithmetic "
#~ "calculations are performed from left to right with no arithmetic "
#~ "precedence. Parentheses can be nested to any level. When the last "
#~ "parenthesis is matched, the display area is updated."
#~ msgstr ""
#~ "在算术运算中提供优先顺序。首先执行圆括号中的运算。如果不使用圆括号，算术运"
#~ "算按从左至右的顺序执行，没有算术优先顺序。圆括号可以多层嵌套。上一个圆括号"
#~ "得以匹配后，显示区域即会更新。"

#~ msgid "e to the <replaceable>x</replaceable> Power"
#~ msgstr "e 的 <replaceable>x</replaceable> 次幂"

#~ msgid ""
#~ "Calculates the value of <literal>e</literal> raised to the power of the "
#~ "current value in the display area."
#~ msgstr ""
#~ "计算以 <literal>e</literal> 为底，以显示区域中当前值为幂的幂指数的值。"

#~ msgid "10 to the <replaceable>x</replaceable> Power"
#~ msgstr "10 的 <replaceable>x</replaceable> 次幂"

#~ msgid ""
#~ "Calculates the value of 10 raised to the power of the current value in "
#~ "the display area."
#~ msgstr "计算以 10 为底、以显示区域中当前值为幂的幂指数的值。"

#~ msgid "y to the <replaceable>x</replaceable> Power"
#~ msgstr "y 的 <replaceable>x</replaceable> 次幂"

#~ msgid ""
#~ "Raises the current value in the display area to the power of the next "
#~ "value that you enter."
#~ msgstr "计算以显示区域中的当前值为底、以输入的下一个值为幂的幂指数的值。"

#~ msgid "<replaceable>x</replaceable> Factorial"
#~ msgstr "<replaceable>x</replaceable> 的阶乘"

#~ msgid ""
#~ "Calculates the factorial of the current value in the display area. "
#~ "<replaceable>x</replaceable> factorial is <replaceable>x</replaceable>*"
#~ "(<replaceable>x</replaceable>-1)*(<replaceable>x</replaceable>-2)...*1. "
#~ "This function applies only to positive integers."
#~ msgstr ""
#~ "计算显示区域中的当前值的阶乘。<replaceable>x</replaceable> 的阶乘为 "
#~ "<replaceable>x</replaceable>*(<replaceable>x</replaceable>-1)*"
#~ "(<replaceable>x</replaceable>-2)...*1。此函数仅适用于正整数。"

#~ msgid "Random Number Generator"
#~ msgstr "随机数据生成器"

#~ msgid ""
#~ "Generates a random number in the range 0.0 to 1.0 and displays the random "
#~ "number in the display area."
#~ msgstr "生成一个 0.0 到 1.0 之间的随机数，并将其显示在显示区域中。"

#~ msgid "Hexadecimal Numerals"
#~ msgstr "十六进制数字"

#~ msgid "<guibutton>A</guibutton> to <guibutton>E</guibutton> inclusive"
#~ msgstr "<guibutton>A</guibutton> 至 <guibutton>E</guibutton>"

#~ msgid "These numerals are available in hexadecimal base only."
#~ msgstr "这些数字仅在采用十六进制时可用。"

#~ msgid "To Quit"
#~ msgstr "退出"

#~ msgid ""
#~ "To quit <application>mate-calc</application>, choose "
#~ "<menuchoice><guimenu>Calculator</guimenu><guimenuitem>Quit</guimenuitem></"
#~ "menuchoice>."
#~ msgstr ""
#~ "要退出 <application>Calculator</application>，请选择 "
#~ "<menuchoice><guimenu>&ldquo;计算器&rdquo;</guimenu><guimenuitem>&ldquo;退"
#~ "出&rdquo;</guimenuitem></menuchoice>。"

#~ msgid ""
#~ "When you quit <application>mate-calc</application>, the current values of "
#~ "the following settings are stored and automatically applied the next time "
#~ "you start <application>mate-calc</application>:"
#~ msgstr ""
#~ "退出 <application>Calculator</application> 时将存储下列设置的当前值，在下"
#~ "次启动 <application>Calculator</application> 时会自动应用这些设置值："

#~ msgid ""
#~ "Mode: <link linkend=\"mate-calc-basic-mode\">Basic</link>, <link linkend="
#~ "\"mate-calc-financial-mode\">Financial</link>, or <link linkend="
#~ "\"mate-calc-scientific-mode\">Scientific</link>"
#~ msgstr ""
#~ "模式：<link linkend=\"mate-calc-basic-mode\">&ldquo;基本&rdquo;</link>、"
#~ "<link linkend=\"mate-calc-financial-mode\">&ldquo;财务&rdquo;</link>或"
#~ "<link linkend=\"mate-calc-scientific-mode\">&ldquo;科学&rdquo;</link>"

#~ msgid ""
#~ "<link linkend=\"mate-calc-mem-reg\">Memory Registers window</link> "
#~ "displayed or not displayed"
#~ msgstr ""
#~ "显示和不显示的<link linkend=\"mate-calc-mem-reg\">&ldquo;存储寄存器&rdquo;"
#~ "窗口</link>"

#~ msgid "Display type"
#~ msgstr "显示类型"

#~ msgid "Technical Information"
#~ msgstr "技术信息"

#~ msgid "Order of Operations"
#~ msgstr "运算顺序"

#~ msgid ""
#~ "Calculations are performed from left to right with no arithmetic "
#~ "precedence. To apply arithmetic precedence, use parentheses."
#~ msgstr ""
#~ "运算从左至右执行，没有算术优先顺序。要应用算术优先顺序，请使用圆括号。"

#~ msgid ""
#~ "For example, without parentheses: <screen><literal>2 + 3 * 4 = 20 </"
#~ "literal></screen>"
#~ msgstr ""
#~ "例如，不使用圆括号： <screen><literal>2 + 3 * 4 = 20 </literal></screen>"

#~ msgid ""
#~ "With parentheses: <screen><literal>2 + (3 * 4) = 14</literal></screen>"
#~ msgstr "使用圆括号： <screen><literal>2 + (3 * 4) = 14</literal></screen>"

#~ msgid "Error Conditions"
#~ msgstr "错误情况"

#~ msgid "Displays the word <literal>Error</literal> in the display area."
#~ msgstr "在显示区域中显示单词 <literal>Error</literal>。"

#~ msgid ""
#~ "Makes all calculator buttons unavailable, except <guibutton>Clr</"
#~ "guibutton>."
#~ msgstr ""
#~ "使所有计算器按钮不可用（<guibutton>&ldquo;Clr&rdquo;</guibutton>按钮除"
#~ "外）。"

#~ msgid "Makes all calculator options unavailable."
#~ msgstr "使所有计算器选项不可用。"

#~ msgid ""
#~ "Makes all calculator menu items unavailable, except "
#~ "<menuchoice><guimenu>Calculator</guimenu><guimenuitem>Quit</guimenuitem></"
#~ "menuchoice> and <menuchoice><guimenu>Help</guimenu><guimenuitem>Contents</"
#~ "guimenuitem></menuchoice>."
#~ msgstr ""
#~ "使所有计算器菜单项不可用（以下按钮除外：<menuchoice><guimenu>&ldquo;计算器"
#~ "&rdquo;</guimenu><guimenuitem>&ldquo;退出&rdquo;</guimenuitem></"
#~ "menuchoice>和<menuchoice><guimenu>&ldquo;帮助&rdquo;</"
#~ "guimenu><guimenuitem>&ldquo;内容&rdquo;</guimenuitem></menuchoice>。"

#~ msgid ""
#~ "If you perform an invalid calculation, <application>mate-calc</"
#~ "application> indicates the error condition as follows: <placeholder-1/>"
#~ msgstr ""
#~ "如果执行了无效运算，<application>Calculator</application> 会以下列方式指示"
#~ "发生了错误： <placeholder-1/>"

#~ msgid "To Change the Input Mode"
#~ msgstr "更改输入模式"

#~ msgid ""
#~ "To change the input mode, right-click in the text window, then select "
#~ "<guimenuitem>Input Methods</guimenuitem>."
#~ msgstr ""
#~ "要更改输入模式，请右击文本窗口，然后选择<guimenuitem>&ldquo;Input "
#~ "Methods&rdquo;</guimenuitem>。"

#~ msgid "Quick Reference: Keyboard Shortcuts"
#~ msgstr "快速参考：键盘快捷键"

#~ msgid ""
#~ "<xref linkend=\"mate-calc-TBL-keyboard-shortcut-button\"/>, <xref linkend="
#~ "\"mate-calc-TBL-keyboard-shortcut-sci-options\"/>, and <xref linkend="
#~ "\"mate-calc-TBL-keyboard-shortcut-menu\"/> provide a quick reference for "
#~ "all of the <application>mate-calc</application> keyboard shortcuts."
#~ msgstr ""
#~ "<xref linkend=\"mate-calc-TBL-keyboard-shortcut-button\"/>、<xref linkend="
#~ "\"mate-calc-TBL-keyboard-shortcut-sci-options\"/> 和 <xref linkend="
#~ "\"mate-calc-TBL-keyboard-shortcut-menu\"/> 提供了对所有 "
#~ "<application>Calculator</application> 键盘快捷键的快速参考。"

#~ msgid ""
#~ "Quick Reference for Keyboard Shortcuts of <application>mate-calc</"
#~ "application> Buttons"
#~ msgstr "<application>Calculator</application> 按钮键盘快捷键快速参考"

#~ msgid "Keyboard Shortcut"
#~ msgstr "键盘快捷键"

#~ msgid "See"
#~ msgstr "请参见"

#~ msgid "<keycap>0</keycap> to <keycap>9</keycap> inclusive"
#~ msgstr "<keycap>0</keycap> 至 <keycap>9</keycap>"

#~ msgid "Exponential"
#~ msgstr "指数"

#~ msgid "Constant Value"
#~ msgstr "常数值"

#~ msgid "<keycap>(</keycap> and <keycap>)</keycap>"
#~ msgstr "<keycap>(</keycap> 和 <keycap>)</keycap>"

#~ msgid "<keycap>*</keycap> or <keycap>x</keycap>"
#~ msgstr "<keycap>*</keycap> 或 <keycap>x</keycap>"

#~ msgid "<keycap>=</keycap> or <keycap>Return</keycap>"
#~ msgstr "<keycap>=</keycap> 或<keycap>回车</keycap>键"

#~ msgid "Delete"
#~ msgstr "删除"

#~ msgid ""
#~ "Quick Reference for Keyboard Shortcuts of <application>mate-calc</"
#~ "application> Scientific Mode Options"
#~ msgstr ""
#~ "<application>Calculator</application>&ldquo;科学模式&rdquo;选项键盘快捷键"
#~ "快速参考"

#~ msgid "Option"
#~ msgstr "选项"

#~ msgid "Set the trigonometric type to Gradients."
#~ msgstr "将三角类型设置为&ldquo;梯度&rdquo;。"

#~ msgid "Set the numeric base to binary."
#~ msgstr "将数值进制设置为二进制。"

#~ msgid "Set the numeric base to decimal."
#~ msgstr "将数值进制设置为十进制。"

#~ msgid "Set the display type to Fixed-Point format."
#~ msgstr "将显示类型设置为&ldquo;定点&rdquo;格式。"

#~ msgid "Set the trigonometric type to Degrees."
#~ msgstr "将三角类型设置为&ldquo;角度&rdquo;。"

#~ msgid "Select the inverse option for use with the trigonometric functions."
#~ msgstr "选择用于三角函数的反转选项。"

#~ msgid "Set the display type to Engineering format."
#~ msgstr "将显示类型设置为&ldquo;工程&rdquo;格式。"

#~ msgid "Set the numeric base to octal."
#~ msgstr "将数值进制设置为八进制。"

#~ msgid "Set the trigonometric type to Radians."
#~ msgstr "将三角类型设置为&ldquo;弧度&rdquo;。"

#~ msgid "Set the display type to Scientific format."
#~ msgstr "将显示类型设置为&ldquo;科学&rdquo;格式。"

#~ msgid "Set the numeric base to hexadecimal."
#~ msgstr "将数值进制设置为十六进制。"

#~ msgid ""
#~ "Select the hyperbolic option for use with the trigonometric functions."
#~ msgstr "选择用于三角函数的双曲线选项。"

#~ msgid ""
#~ "Quick Reference for Keyboard Shortcuts of <application>mate-calc</"
#~ "application> Menu Items"
#~ msgstr "<application>Calculator</application> 菜单项键盘快捷键快速参考"

#~ msgid "Menu Item"
#~ msgstr "菜单项"

#~ msgid "View"
#~ msgstr "&ldquo;视图&rdquo;"

#~ msgid "Change to Basic Mode"
#~ msgstr "更改为&ldquo;基本模式&rdquo;"

#~ msgid "Edit"
#~ msgstr "&ldquo;编辑&rdquo;"

#~ msgid "Copy"
#~ msgstr "&ldquo;复制&rdquo;"

#~ msgid "Copy the current value in the display area to the clipboard"
#~ msgstr "将显示区域中的当前值复制到剪贴板上"

#~ msgid "Change to Financial Mode"
#~ msgstr "更改为&ldquo;财务模式&rdquo;"

#~ msgid "Insert ASCII Values"
#~ msgstr "&ldquo;插入 ASCII 值&rdquo;"

#~ msgid "Display the <guilabel>Insert ASCII Values</guilabel> window"
#~ msgstr "显示<guilabel>&ldquo;插入 ASCII 值&rdquo;</guilabel>窗口"

#~ msgid "Memory Registers"
#~ msgstr "&ldquo;存储寄存器&rdquo;"

#~ msgid "Display the <guilabel>Memory Registers</guilabel> window"
#~ msgstr "显示<guilabel>&ldquo;存储寄存器&rdquo;</guilabel>窗口"

#~ msgid "Quit"
#~ msgstr "&ldquo;退出&rdquo;"

#~ msgid "Quit the <application>mate-calc</application> application"
#~ msgstr "退出 <application>Calculator</application> 应用程序"

#~ msgid "Change to Scientific Mode"
#~ msgstr "更改为&ldquo;科学模式&rdquo;"

#~ msgid "Show Trailing Zeroes"
#~ msgstr "&ldquo;末尾补零&rdquo;"

#~ msgid "Show trailing zeroes"
#~ msgstr "末尾补零"

#~ msgid "Paste"
#~ msgstr "&ldquo;粘贴&rdquo;"

#~ msgid "Paste the current value in the clipboard to the display area"
#~ msgstr "将剪贴板中的当前值粘贴到显示区域中"

#~ msgid "Help"
#~ msgstr "&ldquo;帮助&rdquo;"

#~ msgid "Display the <application>mate-calc</application> online help"
#~ msgstr "显示 <application>Calculator</application> 联机帮助"

#~ msgid ""
#~ "Permission is granted to copy, distribute and/or modify this document "
#~ "under the terms of the GNU Free Documentation License (GFDL), Version 1.1 "
#~ "or any later version published by the Free Software Foundation with no "
#~ "Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. You "
#~ "can find a copy of the GFDL at this <ulink type=\"help\" url=\"ghelp:fdl"
#~ "\">link</ulink> or in the file COPYING-DOCS distributed with this manual."
#~ msgstr ""
#~ "对于本文档的复制、分发和/或修改必须遵循自由软件基金会 (Free Software "
#~ "Foundation) 发布的 GNU 自由文档许可证 (GFDL) 版本 1.1 或更高版本， 该许可"
#~ "证没有固定的部分、没有封面和背页文本。您可以在此<ulink type=\"help\" url="
#~ "\"ghelp:fdl\">链接</ulink>上或在随本手册一起分发的 COPYING-DOCS 文件中找"
#~ "到 GFDL 的副本。"

#~ msgid ""
#~ "This manual is part of a collection of MATE manuals distributed under "
#~ "the GFDL. If you want to distribute this manual separately from the "
#~ "collection, you can do so by adding a copy of the license to the manual, "
#~ "as described in section 6 of the license."
#~ msgstr ""
#~ "本手册是在 GFDL 许可之下分发的 MATE 手册集合的一部分。如果想要 单独分发此"
#~ "手册，可以在手册中添加该许可证的一份副本然后分发，如该许可证的 第 6 部分所"
#~ "述。"

#~ msgid ""
#~ "Many of the names used by companies to distinguish their products and "
#~ "services are claimed as trademarks. Where those names appear in any MATE "
#~ "documentation, and the members of the MATE Documentation Project are "
#~ "made aware of those trademarks, then the names are in capital letters or "
#~ "initial capital letters."
#~ msgstr ""
#~ "各个公司使用的许多用于区别它们产品和服务的名称都声明为商标。在所有的 "
#~ "MATE 文档以及 MATE Documentation Project 的成员中，这些名称都 是以全大写"
#~ "字母或首字母大写显示，从而表明它们是商标。"

#~ msgid ""
#~ "DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS, WITHOUT WARRANTY OF ANY KIND, "
#~ "EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES "
#~ "THAT THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS FREE OF DEFECTS "
#~ "MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE "
#~ "RISK AS TO THE QUALITY, ACCURACY, AND PERFORMANCE OF THE DOCUMENT OR "
#~ "MODIFIED VERSION OF THE DOCUMENT IS WITH YOU. SHOULD ANY DOCUMENT OR "
#~ "MODIFIED VERSION PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL "
#~ "WRITER, AUTHOR OR ANY CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY "
#~ "SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES "
#~ "AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED "
#~ "VERSION OF THE DOCUMENT IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS "
#~ "DISCLAIMER; AND"
#~ msgstr ""
#~ "文档按“原样”提供，不提供任何明示或暗示的保证，包括但不 限于：文档或文档的"
#~ "修改版本没有适销性方面的缺陷、适合特定目的的适用 性，以及没有侵权行为。您"
#~ "将自行承担本文档以及文档修改版本的质量、准 确性以及性能方面的风险。如果任"
#~ "何文档或文档修改版本存在缺陷，您（而 不是最初的编写者、作者或撰写人）将承"
#~ "担所有必需的服务、维修或更正的 费用。此免责声明是本许可证的重要组成部分。"
#~ "如果不接受此免责声明， 那么您就没有权利使用任何文档或文档的修改版本；并且"

#~ msgid ""
#~ "UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN TORT "
#~ "(INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL THE AUTHOR, INITIAL "
#~ "WRITER, ANY CONTRIBUTOR, OR ANY DISTRIBUTOR OF THE DOCUMENT OR MODIFIED "
#~ "VERSION OF THE DOCUMENT, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE "
#~ "LIABLE TO ANY PERSON FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR "
#~ "CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, "
#~ "DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR "
#~ "MALFUNCTION, OR ANY AND ALL OTHER DAMAGES OR LOSSES ARISING OUT OF OR "
#~ "RELATING TO USE OF THE DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT, "
#~ "EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH "
#~ "DAMAGES."
#~ msgstr ""
#~ "无论在任何情况以及在任何法律理论下，本文档或文档修改版本的作 者、最初的编"
#~ "写者、任何撰写人或任何分发者，或者任意这些方的任何提供 者都不对任何人由于"
#~ "使用本文档或文档修改版本引起或带来的任何直接的、间接的、 特殊的、偶然的或"
#~ "继发的损失承担任何民事（包括疏忽）、合同或其它方面的 责任，这些损失包括但"
#~ "不限于信誉损失、工作停止、计算机失败或故障，或任 何以及所有其它损失或由此"
#~ "引发的或与之相关的损失，即使这些方已被告知存 在出现此类损失的可能性时也是"
#~ "如此。"

#~ msgid ""
#~ "DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT ARE PROVIDED UNDER THE "
#~ "TERMS OF THE GNU FREE DOCUMENTATION LICENSE WITH THE FURTHER "
#~ "UNDERSTANDING THAT: <placeholder-1/>"
#~ msgstr ""
#~ "本文档以及文档的修改版本都是在遵循 GNU 自由文档许可证的条款下提供，这表 示"
#~ "具有以下含义： <placeholder-1/>"