From b678af6c09b45c7dd2488972ec78a8d86b34a206 Mon Sep 17 00:00:00 2001 From: info-cppsp Date: Sat, 18 Nov 2017 16:21:24 +0100 Subject: Fix indents 04 --- plugins/udisks2/udisks2-plugin.c | 573 ++++++++++++++++++--------------------- 1 file changed, 270 insertions(+), 303 deletions(-) (limited to 'plugins/udisks2') diff --git a/plugins/udisks2/udisks2-plugin.c b/plugins/udisks2/udisks2-plugin.c index 2fe401e..c23d09d 100644 --- a/plugins/udisks2/udisks2-plugin.c +++ b/plugins/udisks2/udisks2-plugin.c @@ -1,6 +1,4 @@ -/* -*- Mode: C; tab-width: 8; indent-tabs-mode: t; c-basic-offset: 8 -*- - * vim: sts=0 sw=8 ts=8 tw=78 noexpandtab - * +/* * Copyright (C) 2009 Pramod Dematagoda * * This program is free software; you can redistribute it and/or modify @@ -36,7 +34,6 @@ syslog(LOG_ERR, "hellodd"); - #ifdef HAVE_CONFIG_H #include "config.h" #endif /* HAVE_CONFIG_H */ @@ -67,11 +64,11 @@ syslog(LOG_ERR, "hellodd"); * Info about a single sensor */ typedef struct _DevInfo{ - gchar *path; - gchar *id; - gdouble temp; - GDBusProxy *sensor_proxy; // dbus object - GError *error; + gchar *path; + gchar *id; + gdouble temp; + GDBusProxy *sensor_proxy; // dbus object + GError *error; } DevInfo; @@ -84,64 +81,58 @@ GHashTable *devices = NULL; GDBusConnection *connection = NULL; -static void update_device(DevInfo *info) -{ - GError *error = NULL; - GVariant *tempgvar = NULL; - GVariant *tempgvar2 = NULL; - gdouble temp; +static void update_device(DevInfo *info) { + GError *error = NULL; + GVariant *tempgvar = NULL; + GVariant *tempgvar2 = NULL; + gdouble temp; - // check valid input parameter - g_return_if_fail(info != NULL); + // check valid input parameter + g_return_if_fail(info != NULL); - // check connection too - g_return_if_fail(connection != NULL); + // check connection too + g_return_if_fail(connection != NULL); - g_clear_error(&info->error); + g_clear_error(&info->error); // for the udisks plugin a new sensor_proxy was created here, which seems stupid, as one is already stored in the DevInfo struct // I only create one direct connect proxy here in this function - // check for sensor_proxy, which should exist at this point, make one if necessary and save it into DevInfo - // this is used to get the temp value the direct way - if(NULL == info->sensor_proxy) - { - info->sensor_proxy = g_dbus_proxy_new_sync(connection, G_DBUS_PROXY_FLAGS_NONE, NULL, - UDISKS2_BUS_NAME, - info->path, - UDISKS2_PROPERTIES_INTERFACE, - NULL, &error - ); - - // check, just to be sure - if (NULL == info->sensor_proxy) - { + // check for sensor_proxy, which should exist at this point, make one if necessary and save it into DevInfo + // this is used to get the temp value the direct way + if(NULL == info->sensor_proxy) { + info->sensor_proxy = g_dbus_proxy_new_sync(connection, G_DBUS_PROXY_FLAGS_NONE, NULL, + UDISKS2_BUS_NAME, + info->path, + UDISKS2_PROPERTIES_INTERFACE, + NULL, &error ); + + // check, just to be sure + if (NULL == info->sensor_proxy) { #ifdef UD2PD syslog(LOG_ERR, "Failed to get drive temperature 1"); #endif - g_debug("Failed to get drive temperature 1: %s", - error->message); - g_clear_error(&error); - return; - } - } + g_debug("Failed to get drive temperature 1: %s", error->message); + g_clear_error(&error); + return; + } + } // "DriveAtaSmartTimeCollected" in ud2 is "drive ata SmartUpdated" // fd: The point in time (seconds since the Unix Epoch) that the SMART status was updated or 0 if never updated. // should we bother getting this time?? /* - if (!g_dbus_proxy_call_sync(sensor_proxy, "Get", NULL, - G_TYPE_STRING, UDISKS2_BUS_NAME, - G_TYPE_STRING, "DriveAtaSmartTimeCollected", G_TYPE_INVALID, - G_TYPE_VALUE, &smart_time, - G_TYPE_INVALID) || - !g_value_get_uint64(&smart_time)) - { - g_object_unref(sensor_proxy); - return; - } + if (!g_dbus_proxy_call_sync(sensor_proxy, "Get", NULL, + G_TYPE_STRING, UDISKS2_BUS_NAME, + G_TYPE_STRING, "DriveAtaSmartTimeCollected", G_TYPE_INVALID, + G_TYPE_VALUE, &smart_time, + G_TYPE_INVALID) || !g_value_get_uint64(&smart_time)) { + + g_object_unref(sensor_proxy); + return; + } */ @@ -154,56 +145,50 @@ syslog(LOG_ERR, "Failed to get drive temperature 1"); // this smartblob was needed, bc there was no other way to get the smart temperature from udisks /* - if (!g_dbus_proxy_call_sync(sensor_proxy, "Get", &info->error, - G_TYPE_STRING, UDISKS2_BUS_NAME, - G_TYPE_STRING, "DriveAtaSmartBlob", G_TYPE_INVALID, - G_TYPE_VALUE, &smart_blob_val, - G_TYPE_INVALID)) - { - g_debug("Error getting DriveAtaSmartBlob %s", - info->error ? info->error->message : "NULL"); - g_object_unref(sensor_proxy); - return; - } - smart_blob = g_value_get_boxed(&smart_blob_val); - - sk_disk_open(NULL, &sk_disk); - sk_disk_set_blob(sk_disk, smart_blob->data, smart_blob->len); - if (sk_disk_smart_get_temperature(sk_disk, &temperature) < 0) - { - g_debug("Error getting temperature from AtaSmartBlob"); - g_free(sk_disk); - g_array_free(smart_blob, TRUE); - g_object_unref(sensor_proxy); - return; - } + if (!g_dbus_proxy_call_sync(sensor_proxy, "Get", &info->error, + G_TYPE_STRING, UDISKS2_BUS_NAME, + G_TYPE_STRING, "DriveAtaSmartBlob", G_TYPE_INVALID, + G_TYPE_VALUE, &smart_blob_val, + G_TYPE_INVALID)) { + + g_debug("Error getting DriveAtaSmartBlob %s", info->error ? info->error->message : "NULL"); + g_object_unref(sensor_proxy); + return; + } + smart_blob = g_value_get_boxed(&smart_blob_val); + + sk_disk_open(NULL, &sk_disk); + sk_disk_set_blob(sk_disk, smart_blob->data, smart_blob->len); + if (sk_disk_smart_get_temperature(sk_disk, &temperature) < 0) { + g_debug("Error getting temperature from AtaSmartBlob"); + g_free(sk_disk); + g_array_free(smart_blob, TRUE); + g_object_unref(sensor_proxy); + return; + } */ - // directly asking the device's DBus object for the temp - tempgvar = g_dbus_proxy_call_sync(info->sensor_proxy, "Get", - g_variant_new ("(ss)", - UDISKS2_DEVICE_INTERFACE2_NAME, - "SmartTemperature"), // parameters - G_DBUS_CALL_FLAGS_NONE, // flags - -1, // timeout - NULL, // cancellable - &error); + // directly asking the device's DBus object for the temp + tempgvar = g_dbus_proxy_call_sync(info->sensor_proxy, "Get", + g_variant_new ("(ss)", + UDISKS2_DEVICE_INTERFACE2_NAME, + "SmartTemperature"), // parameters + G_DBUS_CALL_FLAGS_NONE, // flags + -1, // timeout + NULL, // cancellable + &error); - if (NULL == tempgvar) - { + if (NULL == tempgvar) { #ifdef UD2PD syslog(LOG_ERR, "Failed to get drive temperature 2"); #endif - g_debug("Failed to get drive temperature 2: %s", - error->message); - g_clear_error(&error); - // throw away proxy, maybe next time it will be better - g_clear_object(&info->sensor_proxy); - return; - } - else - { + g_debug("Failed to get drive temperature 2: %s", error->message); + g_clear_error(&error); + // throw away proxy, maybe next time it will be better + g_clear_object(&info->sensor_proxy); + return; + } else { #ifdef UD2PD syslog(LOG_ERR, "tempgvar value: %s", g_variant_print(tempgvar, TRUE)); @@ -211,25 +196,25 @@ syslog(LOG_ERR, "tempgvar value: %s", g_variant_print(tempgvar, TRUE)); //syslog(LOG_ERR, "tempgvar value: %s", g_variant_print(g_variant_get_variant(g_variant_get_child_value(tempgvar, 0)), TRUE)); #endif - // tempgvar comes back as sg along the lines of array(gvariant(tempasdouble)) - // hence unpacking - // need to free up every param / return value, so can't do it like: - //temp = g_variant_get_double(g_variant_get_variant(g_variant_get_child_value(tempgvar, 0))); - tempgvar2 = g_variant_get_child_value(tempgvar, 0); - g_variant_unref(tempgvar); - tempgvar = g_variant_get_variant(tempgvar2); - g_variant_unref(tempgvar2); - temp = g_variant_get_double(tempgvar); - g_variant_unref(tempgvar); + // tempgvar comes back as sg along the lines of array(gvariant(tempasdouble)) + // hence unpacking + // need to free up every param / return value, so can't do it like: + //temp = g_variant_get_double(g_variant_get_variant(g_variant_get_child_value(tempgvar, 0))); + tempgvar2 = g_variant_get_child_value(tempgvar, 0); + g_variant_unref(tempgvar); + tempgvar = g_variant_get_variant(tempgvar2); + g_variant_unref(tempgvar2); + temp = g_variant_get_double(tempgvar); + g_variant_unref(tempgvar); - // temp in K - info->temp = temp - 273.15; + // temp in K + info->temp = temp - 273.15; #ifdef UD2PD syslog(LOG_ERR, "Refresh udisks2 device temp: '%f'\n", info->temp); #endif - } + } } @@ -239,15 +224,15 @@ syslog(LOG_ERR, "Refresh udisks2 device temp: '%f'\n", info->temp); /* This is the handler for the Changed() signal emitted by UDisks. */ /* static void udisks2_changed_signal_cb(GDBusProxy *sensor_proxy) { - const gchar *path; - DevInfo *info; + const gchar *path; + DevInfo *info; - // fd2: Gets the object path sensor_proxy is for. - path = g_dbus_proxy_get_object_path(sensor_proxy); - g_debug("%s changed()", path); - info = g_hash_table_lookup(devices, path); + // fd2: Gets the object path sensor_proxy is for. + path = g_dbus_proxy_get_object_path(sensor_proxy); + g_debug("%s changed()", path); + info = g_hash_table_lookup(devices, path); -// update_device(info); +// update_device(info); } */ @@ -262,133 +247,125 @@ static void udisks2_plugin_get_sensors(GList **sensors) { syslog(LOG_ERR, "fstart"); #endif - GDBusProxy *proxy = NULL; - GError *error = NULL; + GDBusProxy *proxy = NULL; + GError *error = NULL; - DevInfo *info; + DevInfo *info; - /* This connection will be used for everything, including the obtaining - * of sensor data - */ - // fd1: Returns a connection to the given bus. The connection is a global variable shared with other callers of this function. - // fd2: Synchronously connects to the message bus specified by bus_type . Note that the returned object may shared with other callers, e.g. if two separate parts of a process calls this function with the same bus_type , they will share the same object. - connection = g_bus_get_sync(G_BUS_TYPE_SYSTEM, NULL, &error); - if (NULL == connection) - { + /* This connection will be used for everything, including the obtaining + * of sensor data + */ + // fd1: Returns a connection to the given bus. The connection is a global variable shared with other callers of this function. + // fd2: Synchronously connects to the message bus specified by bus_type . Note that the returned object may shared with other callers, e.g. if two separate parts of a process calls this function with the same bus_type , they will share the same object. + connection = g_bus_get_sync(G_BUS_TYPE_SYSTEM, NULL, &error); + if (NULL == connection) { #ifdef UD2PD syslog(LOG_ERR, "dbus conn fail"); #endif - g_debug("Failed to open connection to DBUS: %s", - error->message); - g_clear_error(&error); - return; - } + g_debug("Failed to open connection to DBUS: %s", error->message); + g_clear_error(&error); + return; + } #ifdef UD2PD syslog(LOG_ERR, "dbus conn success"); #endif - /* This was the proxy which is only used once during the enumeration of - * the device object paths - */ - // I use it to get all info of all devices at once - // fd1: Creates a new proxy for a remote interface exported by a connection on a message bus. - // fd2: Creates a proxy for accessing interface_name on the remote object at object_path owned by name at connection and synchronously loads D-Bus properties unless the G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES flag is used. - proxy = g_dbus_proxy_new_sync(connection, G_DBUS_PROXY_FLAGS_NONE, NULL, - UDISKS2_BUS_NAME, - UDISKS2_OBJECT_PATH, - UDISKS2_INTERFACE_NAME, - NULL, &error - ); - - if (NULL == proxy) - { + /* This was the proxy which is only used once during the enumeration of + * the device object paths + */ + // I use it to get all info of all devices at once + // fd1: Creates a new proxy for a remote interface exported by a connection on a message bus. + // fd2: Creates a proxy for accessing interface_name on the remote object at object_path owned by name at connection and synchronously loads D-Bus properties unless the G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES flag is used. + proxy = g_dbus_proxy_new_sync(connection, G_DBUS_PROXY_FLAGS_NONE, NULL, + UDISKS2_BUS_NAME, + UDISKS2_OBJECT_PATH, + UDISKS2_INTERFACE_NAME, + NULL, &error ); + + if (NULL == proxy) { #ifdef UD2PD syslog(LOG_ERR, "dbus conn proxy fail"); #endif - g_debug("dbus conn proxy fail: %s", - error->message); - g_clear_error(&error); - g_clear_object(&connection); - return; - } + g_debug("dbus conn proxy fail: %s", error->message); + g_clear_error(&error); + g_clear_object(&connection); + return; + } #ifdef UD2PD syslog(LOG_ERR, "dbus conn proxy success"); #endif - /* The object paths of the disks are enumerated and placed in an array - * of object paths - */ - // fd1: Function for synchronously invoking a method and receiving reply values. - // fd2: Synchronously invokes the method_name method on proxy. - // called "EnumerateDevices" method on UDisks object through dbus - // which returned an array of objectpaths - // "GetManagedObjects" returns dict of (objectpath, (dict of (string [ie. if. name], dict of(string [ie. property name], variant [ie. prop. value])))) + /* The object paths of the disks are enumerated and placed in an array + * of object paths + */ + // fd1: Function for synchronously invoking a method and receiving reply values. + // fd2: Synchronously invokes the method_name method on proxy. + // called "EnumerateDevices" method on UDisks object through dbus + // which returned an array of objectpaths + // "GetManagedObjects" returns dict of (objectpath, (dict of (string [ie. if. name], dict of(string [ie. property name], variant [ie. prop. value])))) - // g_dbus_proxy_call_sync() returns NULL on error, GVariant * otherwise - // need second param to prevent memory leak - GVariant *managed_objects, *managed_objects2; + // g_dbus_proxy_call_sync() returns NULL on error, GVariant * otherwise + // need second param to prevent memory leak + GVariant *managed_objects, *managed_objects2; - managed_objects2 = g_dbus_proxy_call_sync(proxy, "GetManagedObjects", - NULL, // parameters - G_DBUS_CALL_FLAGS_NONE, // flags - -1, // timeout - NULL, // cancellable - &error); + managed_objects2 = g_dbus_proxy_call_sync(proxy, "GetManagedObjects", + NULL, // parameters + G_DBUS_CALL_FLAGS_NONE, // flags + -1, // timeout + NULL, // cancellable + &error); - if (NULL == managed_objects2) - { + if (NULL == managed_objects2) { #ifdef UD2PD syslog(LOG_ERR, "Failed to enumerate disk devices"); #endif - g_debug("Failed to enumerate disk devices: %s", - error->message); - g_clear_error(&error); - g_clear_object(&proxy); - g_clear_object(&connection); - return; - } + g_debug("Failed to enumerate disk devices: %s", error->message); + g_clear_error(&error); + g_clear_object(&proxy); + g_clear_object(&connection); + return; + } - // the result dictionary is enclosed in an array, unpack - managed_objects = g_variant_get_child_value(managed_objects2, 0); - g_variant_unref(managed_objects2); + // the result dictionary is enclosed in an array, unpack + managed_objects = g_variant_get_child_value(managed_objects2, 0); + g_variant_unref(managed_objects2); #ifdef UD2PD //syslog(LOG_ERR, "managed_objects type: %s", g_variant_print(managed_objects, TRUE)); syslog(LOG_ERR, "success to enumerate disk devices"); #endif - // iterator for the result dictionary + // iterator for the result dictionary - // iterator code is based on the g_variant_iter_next() documentation - // iter is freed if the GVariant is, when using g_variant_iter_init() - GVariantIter iter; - gchar *key; // object path (like '/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_250GB_*insert drive serial nr.*') - GVariant *value; + // iterator code is based on the g_variant_iter_next() documentation + // iter is freed if the GVariant is, when using g_variant_iter_init() + GVariantIter iter; + gchar *key; // object path (like '/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_250GB_*insert drive serial nr.*') + GVariant *value; #ifdef UD2PD // log collection size syslog(LOG_ERR, "iter init count: %d", (int) g_variant_iter_init(&iter, managed_objects)); #else - g_variant_iter_init(&iter, managed_objects); + g_variant_iter_init(&iter, managed_objects); #endif - // "{sv}" is a GVariant format string - // {} dictionary of, s string, v GVariant - // changed to "{oa{sa{sv}}}" on error message 'the GVariant format string '{sv}' has a type of '{sv}' but the given value has a type of 'a{oa{sa{sv}}}'' - // a is array, o is object path - // NOO!! the right format string is "{o@*}", which means get an object path into the 1st variable (key) - // and get 'everything else' (as a GVariant) into the 2nd variable (value) - // needs the & before the key and value params! - while (g_variant_iter_next(&iter, "{o@*}", &key, &value)) - { + // "{sv}" is a GVariant format string + // {} dictionary of, s string, v GVariant + // changed to "{oa{sa{sv}}}" on error message 'the GVariant format string '{sv}' has a type of '{sv}' but the given value has a type of 'a{oa{sa{sv}}}'' + // a is array, o is object path + // NOO!! the right format string is "{o@*}", which means get an object path into the 1st variable (key) + // and get 'everything else' (as a GVariant) into the 2nd variable (value) + // needs the & before the key and value params! + while (g_variant_iter_next(&iter, "{o@*}", &key, &value)) { #ifdef UD2PD syslog(LOG_ERR, "in iter while loop"); @@ -396,43 +373,42 @@ syslog(LOG_ERR, "key value: %s", key); //syslog(LOG_ERR, "value type: %s", g_variant_print(value, TRUE)); #endif - // level 2 - // create a dictionary of value - // the two interface names that we are searching for are known and defined - // can't use GVariantDict, it only supports '{sv}' but the given value has a type of '{sa{sv}}' - // using general lookup + // level 2 + // create a dictionary of value + // the two interface names that we are searching for are known and defined + // can't use GVariantDict, it only supports '{sv}' but the given value has a type of '{sa{sv}}' + // using general lookup - GVariant *propdict; // drive data - GVariant *propdict2; // drive smart data + GVariant *propdict; // drive data + GVariant *propdict2; // drive smart data - // make two dictionaries that contain the properties of the drive interfaces - propdict = g_variant_lookup_value(value, UDISKS2_DEVICE_INTERFACE_NAME, G_VARIANT_TYPE_DICTIONARY); - propdict2 = g_variant_lookup_value(value, UDISKS2_DEVICE_INTERFACE2_NAME, G_VARIANT_TYPE_DICTIONARY); + // make two dictionaries that contain the properties of the drive interfaces + propdict = g_variant_lookup_value(value, UDISKS2_DEVICE_INTERFACE_NAME, G_VARIANT_TYPE_DICTIONARY); + propdict2 = g_variant_lookup_value(value, UDISKS2_DEVICE_INTERFACE2_NAME, G_VARIANT_TYPE_DICTIONARY); - // do we have the right ifname keys? - if((NULL != propdict) && (NULL != propdict2)) - { + // do we have the right ifname keys? + if((NULL != propdict) && (NULL != propdict2)) { #ifdef UD2PD syslog(LOG_ERR, "propdict type: %s", g_variant_print(propdict, TRUE)); syslog(LOG_ERR, "propdict2 type: %s", g_variant_print(propdict2, TRUE)); #endif - // get data - gchar *id; - gchar *model; + // get data + gchar *id; + gchar *model; - gboolean smartenabled; - gdouble temp; + gboolean smartenabled; + gdouble temp; - // NULL, bc we don't care about the length of the string - // typecast bc g_variant_get_string() returns const char* - id = (gchar *) g_variant_get_string(g_variant_lookup_value(propdict, "Id", G_VARIANT_TYPE_STRING), NULL); - model = (gchar *) g_variant_get_string(g_variant_lookup_value(propdict, "Model", G_VARIANT_TYPE_STRING), NULL); + // NULL, bc we don't care about the length of the string + // typecast bc g_variant_get_string() returns const char* + id = (gchar *) g_variant_get_string(g_variant_lookup_value(propdict, "Id", G_VARIANT_TYPE_STRING), NULL); + model = (gchar *) g_variant_get_string(g_variant_lookup_value(propdict, "Model", G_VARIANT_TYPE_STRING), NULL); - smartenabled = g_variant_get_boolean(g_variant_lookup_value(propdict2, "SmartEnabled", G_VARIANT_TYPE_BOOLEAN)); - temp = g_variant_get_double(g_variant_lookup_value(propdict2, "SmartTemperature", G_VARIANT_TYPE_DOUBLE)); + smartenabled = g_variant_get_boolean(g_variant_lookup_value(propdict2, "SmartEnabled", G_VARIANT_TYPE_BOOLEAN)); + temp = g_variant_get_double(g_variant_lookup_value(propdict2, "SmartTemperature", G_VARIANT_TYPE_DOUBLE)); #ifdef UD2PD syslog(LOG_ERR, "Found udisks2 device id: '%s'\n", id); @@ -442,144 +418,135 @@ syslog(LOG_ERR, "Found udisks2 device temp: '%f'\n", temp); #endif - // only go on if smart is enabled - // save data - if(smartenabled) - { + // only go on if smart is enabled + // save data + if(smartenabled) { - info = g_malloc0(sizeof(DevInfo)); - if (NULL == devices) - { - devices = g_hash_table_new(g_str_hash, - g_str_equal); - } + info = g_malloc0(sizeof(DevInfo)); + if (NULL == devices) { + devices = g_hash_table_new(g_str_hash, g_str_equal); + } - info->id = g_strdup(id); - info->path = g_strdup(key); + info->id = g_strdup(id); + info->path = g_strdup(key); - // temp in K - // this could be left at 0.0, 2 seconds later it will be refreshed anyway - info->temp = (gdouble)temp - 273.15; - g_hash_table_insert(devices, info->id, info); + // temp in K + // this could be left at 0.0, 2 seconds later it will be refreshed anyway + info->temp = (gdouble)temp - 273.15; + g_hash_table_insert(devices, info->id, info); - // Write the sensor data - sensors_applet_plugin_add_sensor(sensors, - id, - "Disk Temperature", - model, - TEMP_SENSOR, - FALSE, - HDD_ICON, - DEFAULT_GRAPH_COLOR); + // Write the sensor data + sensors_applet_plugin_add_sensor(sensors, + id, + "Disk Temperature", + model, + TEMP_SENSOR, + FALSE, + HDD_ICON, + DEFAULT_GRAPH_COLOR); - g_debug("Added %s", id); + g_debug("Added %s", id); #ifdef UD2PD syslog(LOG_ERR, "Added %s", id); #endif - } - else - { + } else { #ifdef UD2PD syslog(LOG_ERR, "No temp data for device: %s\n", key); #endif - g_debug ("No temp data for device: %s\n", key); - } + g_debug ("No temp data for device: %s\n", key); + } #ifdef UD2PD syslog(LOG_ERR, "b4 free1"); #endif - g_free(id); - g_free(model); + g_free(id); + g_free(model); - } + } #ifdef UD2PD syslog(LOG_ERR, "b4 free2"); #endif - // free propdict, propdict2 - // g_variant_dict_unref() may not work a few times, gives error - // this one seems to do fine - if(NULL != propdict) {g_variant_unref(propdict);} - if(NULL != propdict2) {g_variant_unref(propdict2);} + // free propdict, propdict2 + // g_variant_dict_unref() may not work a few times, gives error + // this one seems to do fine + if(NULL != propdict) {g_variant_unref(propdict);} + if(NULL != propdict2) {g_variant_unref(propdict2);} #ifdef UD2PD syslog(LOG_ERR, "b4 free3"); #endif - g_free(key); - g_variant_unref(value); + g_free(key); + g_variant_unref(value); - } // end of while loop + } // end of while loop - g_variant_unref(managed_objects); - g_clear_object(&proxy); - if (NULL == devices) - { - g_clear_object(&connection); - } + g_variant_unref(managed_objects); + g_clear_object(&proxy); + if (NULL == devices) { + g_clear_object(&connection); + } } - // this is the function called every refresh cycle static gdouble udisks2_plugin_get_sensor_value(const gchar *path, - const gchar *id, - SensorType type, - GError **error) { - DevInfo *info; - - // get device stuct from data store - info = (DevInfo *)g_hash_table_lookup(devices, path); - if (NULL == info) - { - g_set_error(error, SENSORS_APPLET_PLUGIN_ERROR, 0, - "Error finding disk with path %s", path); - return 0.0; - } - - if (info->error) - { - *error = info->error; - info->error = NULL; - return 0.0; - } - - // refresh device temp - /* update value since Changed() signal doesn't fire manually enough so - * poll instead */ - update_device(info); - return info->temp; + const gchar *id, + SensorType type, + GError **error) { + DevInfo *info; + + // get device stuct from data store + info = (DevInfo *) g_hash_table_lookup(devices, path); + if (NULL == info) { + g_set_error(error, SENSORS_APPLET_PLUGIN_ERROR, 0, "Error finding disk with path %s", path); + return 0.0; + } + + if (info->error) { + *error = info->error; + info->error = NULL; + return 0.0; + } + + // refresh device temp + /* update value since Changed() signal doesn't fire manually enough so + * poll instead */ + update_device(info); + return info->temp; } // API functions const gchar *sensors_applet_plugin_name(void) { - return plugin_name; + return plugin_name; } static GList *udisks2_plugin_init(void) { - GList *sensors = NULL; + GList *sensors = NULL; - udisks2_plugin_get_sensors(&sensors); + udisks2_plugin_get_sensors(&sensors); - return sensors; + return sensors; } GList *sensors_applet_plugin_init(void) { - return udisks2_plugin_init(); + return udisks2_plugin_init(); } gdouble sensors_applet_plugin_get_sensor_value(const gchar *path, - const gchar *id, - SensorType type, - GError **error) { - return udisks2_plugin_get_sensor_value(path, id, type, error); + const gchar *id, + SensorType type, + GError **error) { + + return udisks2_plugin_get_sensor_value(path, id, type, error); } -- cgit v1.2.1