summaryrefslogtreecommitdiff
path: root/libview/ev-view.c
AgeCommit message (Collapse)AuthorFilesLines
2017-09-06libview: Avoid unnecessary region copies when selecting textCarlos Garcia Campos1-4/+4
Now that we always build a new damage region, we don't need to copy the selection covered region. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=7a7ebb8
2017-09-06libview: Use a larger damage area to redraw selectionsCarlos Garcia Campos1-27/+25
Depending on the zoom level the area actually drawn by cairo can be a bit larger than the selected region due to rounding errors or pixel alignment. We use the selected region to build the damage area to invalidate when drawing selections which in many cases is not large enough. This causes that sometimes when removing a selections some small rectangles keep drawn because they are not redrawn. To avoid this we grow the damage area computed from selected regions. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=a497fb4
2017-09-06libview: Don't queue a redraw when damaged region hasn't changedCarlos Garcia Campos1-24/+26
When the region covered by old and new selection is the same, don't schedule a new redraw for the union. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=4093541
2017-09-06libview: Invalidate union of old and new selectionJason Crain1-4/+3
Instead of using xor, use the union of old_sel and new_sel to find what needs redrawing. https://bugzilla.gnome.org/show_bug.cgi?id=703024 origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=9fd3d7d
2017-09-06libview: Move the caret cursor when clicking outside a selectionCarlos Garcia Campos1-12/+23
origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=9a5e9df
2017-09-06libview: Remove unused in_selection member from SelectionInfo structCarlos Garcia Campos1-6/+2
This is currently unused and redundant, to know whether there are selections we use selection_info.selections. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=5503827
2017-09-06libview: Keep the offset inside a line when moving the caret between linesAntia Puentes1-1/+18
https://bugzilla.gnome.org/show_bug.cgi?id=702075 origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=255b977
2017-09-06libview: Position the caret cursor at beginning/end of the lineCarlos Garcia Campos1-11/+37
when clicking outside the line Position the caret cursor also when not clicking over text if the line contains text. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=040a42d
2017-09-06libview: Do not schedule a redraw when selecting all textCarlos Garcia Campos1-1/+0
merge_selection_region already invalidates the damaged region. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=1e3486e
2017-09-06libview: Use prepend + reverse instead of append to create selections listCarlos Garcia Campos1-4/+4
origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=c30e9b1
2017-09-06libview: Use GSlice to allocate EvViewSelectionCarlos Garcia Campos1-10/+7
These structs are allocated and deallocated a lot while selecting text and merging selection regions. orign commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=dc1e75b7be87
2017-09-06libview: Text selection using the caret cursor.Antia Puentes1-22/+74
https://bugzilla.gnome.org/show_bug.cgi?id=702073 origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=a6e3834
2017-09-06libview: Update the caret cursor after selecting text with the mouseCarlos Garcia Campos1-23/+29
If there's an active selection move the caret cursor to the location where the mouse is released. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=619c100
2017-09-06libview: Take page border into account when computing selectionsCarlos Garcia Campos1-2/+8
origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=b9c32bc libview: Fix a crash when selecting more than one page https://bugzilla.gnome.org/show_bug.cgi?id=702874 origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=e6fd3ff Make sure we never use negative coordinates in selection rectangle https://bugzilla.gnome.org/show_bug.cgi?id=702874 origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=4a88904
2017-09-06libview: Make sure the cursor blinks after moving it by a clickCarlos Garcia Campos1-0/+4
The cursor blink is reset when the cursor is moved with the keyboard, but not when positioned with the mouse. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=1435ace
2017-09-06libview: merge get_caret_cursor_rect_from_offset and get_caret_cursor_areaCarlos Garcia Campos1-34/+22
Into a single function and use get_caret_cursor_area everywhere. get_caret_cursor_rect_from_offset() was a bit confusing, because it didn't return the cursor_rect, but the bbox of the character where the cursor should be at. The method that actually returns the cursor_rect is get_caret_cursor_area. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=13a5978
2017-09-06libview: Notify about caret navigation errors using the error bell.Antia Puentes1-0/+3
https://bugzilla.gnome.org/show_bug.cgi?id=702650 origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=d0f449d
2017-09-06libview: Do not redraw after a click if cursor position hasn't changedCarlos Garcia Campos1-1/+2
origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=e118165
2017-09-06libview: Use GtkBindings for caret navigationCarlos Garcia Campos1-30/+90
This allows themes to override the key bindings and API users to move the caret cursor programmatically using g_signal_emit_by_name. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=1206ff1
2017-09-06libview: Rename EvView::binding-activated signal as EvView::scrollCarlos Garcia Campos1-37/+40
EvView::binding-activated is too generic name for scroll key bindings. Renamed as EvView::scroll and changed to use GtkOrientable instead of a gboolean. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=b70e413
2017-09-06libview: Position the caret cursor by clickingAntia Puentes1-0/+53
https://bugzilla.gnome.org/show_bug.cgi?id=702071 origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=153e67d
2017-09-06libview: Use EvPixbufCache to find selection regionJason Crain1-15/+11
Using view->selection_info.selections is inaccurate if the zoom changes, causing drag and drop of selected text to fail. This changes location_in_selected_text function to use the more accurate ev_pixbuf_cache_get_selection_region to find the selection region. https://bugzilla.gnome.org/show_bug.cgi?id=702406 origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=abedcbd
2017-09-06libview: Split ev_pixbuf_cache_get_selection_surface into two functionsJason Crain1-9/+9
ev_pixbuf_cache_get_selection_surface returns the selection surface, and new function ev_pixbuf_cache_get_selection_region returns the selection region. https://bugzilla.gnome.org/show_bug.cgi?id=669022 origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=90d6580
2017-09-06libview: Draw selection highlight from regionJason Crain1-11/+60
Allows a fallback for backends which can implement get_selection_region but not render_selection. Changes ev-pixbuf-cache so a redraw is only done when the scale changes. https://bugzilla.gnome.org/show_bug.cgi?id=669022 origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=9e89fb1
2017-09-06libview: Fix the damage area used to redraw the caret cursorCarlos Garcia Campos1-42/+40
Move to a helper function the code to get the exact area where the caret should be drawn and use it to draw the care cursor and to invalidate the area when blinking. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=f5e7eb4
2017-09-06libview: Actually update the page when moving the care from a different pageCarlos Garcia Campos1-22/+43
I removed the line to set the current page after moving the caret cursor by mistake. Add it back and change cursor_go_to_next/previous_page to not update the page, but only update the cursor_page so that we have a single place where the page is updated after caret cursor moves. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=bf85030
2017-09-06libview: Avoid to update the current page and scroll to the cursor position, ↵Antia Puentes1-106/+132
if the caret cursor was not updated Move the caret cursor only when requested by the user. Keep the page where the caret cursor is in addition to the offset inside that page. https://bugzilla.gnome.org/show_bug.cgi?id=702068 origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=4d15ab5
2017-09-06libview: Make caret cursor blinkCarlos Garcia Campos1-84/+252
Based on GtkEntry and GtkTextView implementation, the caret cursor blinks when the view is active and caret navigation is enabled. It stops blinking after a while if there's no user interaction. It uses GtkSettings:gtk-cursor-blink-time and GtkSettings:gtk-cursor-blink-timeout. https://bugzilla.gnome.org/show_bug.cgi?id=702076 taken from: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=e6f7250
2017-09-06libview: Use logical attributes instead text layout to move the caret cursorCarlos Garcia Campos1-102/+77
taken from: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=95f661b
2017-09-06libview: Initial implementation of caret navigationCarlos Garcia Campos1-4/+453
Navigation by character, word, next/previous line and beginning/end of the line using the caret cursor. The routines to move the cursor don't use GtkTextBuffer to avoid the duplication of the text for every page. - Left/right arrow: Move one character to the left/right. - Up/down arrow: Move up/down one line. - Ctrl + left/right arrow: Move to the beginning/end of the previous/next word. - Home/End: Move to the beginning/end of the current line. https://bugzilla.gnome.org/show_bug.cgi?id=638905 taken from: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=1dc10fe
2017-09-06libview: Refactor code for drawing page and selection surfacesJosé Aliste1-43/+44
The code necessary to draw a page surface or a selection surface is the same. We factor this out to a new static method called draw_surface origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-8&id=3ab6ac1 libview: Fix rendering of the first visible page while resizing While we are resizing the view widget and waiting for a new surface rendered at the right size, we use old surfaces scaled to match the target size. When the begining of a page is not visible, the scaled surfaces are not placed correctly. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-8&id=72f2ae4
2017-08-31libview: only access the relevant page cache for the height requestTobias Mueller1-4/+6
In ev_view_get_height_to_page, the "height" or "dual_height" pointer can be set. If dual_height is set, the dual_height buffer is used. Using the "normal" height cache in dual view causes an out of bounds read. So we restrict the cache accesses to their relevant buffers. https://bugzilla.gnome.org/show_bug.cgi?id=771612 origin commit: https://git.gnome.org/browse/evince/commit/?id=0d44134
2017-08-31ev-view: Forward key events to the focused form fieldCarlos Garcia Campos1-20/+32
This allows to move between words with CTRL+Left/Right in text form fields instead of rotating the view. https://bugzilla.gnome.org/show_bug.cgi?id=699630 origin commit: https://git.gnome.org/browse/evince/commit/?id=ac22e8f
2017-08-31libview: Don't update current_page to negative numberGermán Poo-Caamaño1-1/+2
In continuous mode with dual page view, there is a chance that the pages were outside of the scroll view. When opening a document in such circumstances, the current page should not be updated to a negative number when already has the first page as default. This fixes a crash when searching with a negative current page. Fix https://bugzilla.gnome.org/show_bug.cgi?id=683172 origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=8fe6917
2017-08-31libview: Make page layout a modeWilliam Jon McCann1-44/+120
Instead of having a few different mutually exclusive booleans it makes sense to have it be a mode with the following options: automatic, single, dual. This allows us to have a way to automatically determine if dual page mode should be used when the window is large enough. https://bugzilla.gnome.org/show_bug.cgi?id=689468 origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=42f6d4b
2017-08-31libview: Add new zoom mode that optimizes for readabilityWilliam Jon McCann1-19/+100
This "Automatic" zoom mode will use fit width when the window is smaller than 100% of the actual page size and then use the actual page size up to the point the window is large enough to hold two entire pages side by side. https://bugzilla.gnome.org/show_bug.cgi?id=689468 origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=0cad875
2017-08-31Rename Best Fit mode as Fit PageWilliam Jon McCann1-21/+21
https://bugzilla.gnome.org/show_bug.cgi?id=689468 origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=ffd3853
2017-08-31Move dual page with odd pages left to the view menuCarlos Garcia Campos1-7/+2
As a toggle option only available in dual mode. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=1078b8f
2017-08-31libview: drop deprecated usage of gtk_container_set_resize_moderaveit651-1/+0
see https://developer.gnome.org/gtk3/unstable/GtkContainer.html#gtk-container-set-resize-mode They aren’t necessary anymore since frame clocks and might introduce obscure bugs if used. Gtk3-inspector shows me that resize-mode-is-parent (default) is used.
2017-08-28Refreshing annotations' sidebar upon deletionGiselle Machado1-0/+14
When an annotation is deleted, the sidebar needs to be refreshed so that the annotation is removed from the list See item 3 in this comment: https://bugzilla.gnome.org/show_bug.cgi?id=649044#c33 origin commit: https://git.gnome.org/browse/evince/commit/?id=13defb2
2017-08-28page-cache: Add flags parameter to ev_page_cache_mark_dirty()Carlos Garcia Campos1-2/+2
This allows to specify what is dirty so that it's freed before being cached again. origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-14&id=20c6b3b
2017-08-28libview: add ev_view_remove_annotationGermán Poo-Caamaño1-0/+34
Hide annotation windows if necessary and unset selected element before removing an annotation. https://bugzilla.gnome.org/show_bug.cgi?id=649044 origin commit: https://git.gnome.org/browse/evince/commit/?id=927e956
2017-08-28libview: Rename ev_view_set_focused_element and make it publicJoanmarie Diggs1-11/+11
internally This will be needed in order to implement atk_component_grab_focus https://bugzilla.gnome.org/show_bug.cgi?id=728475 origin commit: https://git.gnome.org/browse/evince/commit/?id=617dc0c
2017-08-28libview: Grab focus for form fields and links on mouse pressAntia Puentes1-143/+278
Rewritten focus annotations in a generic way. https://bugzilla.gnome.org/show_bug.cgi?id=706244 origin commit: https://git.gnome.org/browse/evince/commit/?id=fddb9ee
2017-08-28libview: Handle activation link of a Form Field if presentJosé Aliste1-0/+3
origin commit: https://git.gnome.org/browse/evince/commit/?h=gnome-3-10&id=90e431d
2017-08-25libview: : avoid deprecated gtk_adjustment_changedraveit651-0/+2
gtk_adjustment_changed has been deprecated since version 3.18 and GTK+ emits “changed” itself whenever any of the properties (other than value) change. see https://developer.gnome.org/gtk3/unstable/GtkAdjustment.html#gtk-adjustment-changed
2017-08-24ev-job-find: mark two methods as skipCosimo Cecchi1-0/+6
Methods that use a double pointer to a GList cannot be annotated properly, so skip them until we have a better introspectable API. https://bugzilla.gnome.org/show_bug.cgi?id=691354
2017-08-20avoid deprecated gdk_screen_get_width/heightZenWalker1-3/+7
2017-08-18libview: Scroll small pages in non-continuous modeMarek Kasik1-14/+82
Check whether currently shown page fits actual view and allow user to scroll to previous/next page in that case (also in Dual page mode). Allow also scrolling if only one axis fits the view and the event happenned in the same axis. https://bugzilla.gnome.org/show_bug.cgi?id=562257 origin commit links: https://git.gnome.org/browse/evince/commit/?id=077bab6 https://git.gnome.org/browse/evince/commit/?id=45f527e
2017-08-18libview: Enable GDK_SMOOTH_SCROLL events for viewXiao-Long Chen1-21/+50
This enables the smooth/kinetic scrolling support found in GTK+ 3.3.18 with the document view, and handles them for the Ctrl+scroll, Shift+scroll, and non-continuous best-fit mode scrolling cases. https://bugzilla.gnome.org/show_bug.cgi?id=674098 origin commit link: https://git.gnome.org/browse/evince/commit/?id=34d0d5d
generated by cgit v1.2.1 (git 2.18.0) at 2024-12-16 05:57:57 +0000