Remove pregenerated file

1 files changed, 0 insertions, 8413 deletions

diff --git a/ltmain.sh b/ltmain.sh
deleted file mode 100755
index 3506ead..0000000
--- a/ltmain.sh
+++ /dev/null
@@ -1,8413 +0,0 @@
-# Generated from ltmain.m4sh.
-
-# ltmain.sh (GNU libtool) 2.2.6
-# Written by Gordon Matzigkeit <[email protected]>, 1996
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
-# This is free software; see the source for copying conditions.  There is NO
-# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-# GNU Libtool is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-#     --config             show all configuration variables
-#     --debug              enable verbose shell tracing
-# -n, --dry-run            display commands without modifying any files
-#     --features           display basic configuration information and exit
-#     --mode=MODE          use operation mode MODE
-#     --preserve-dup-deps  don't remove duplicate dependency libraries
-#     --quiet, --silent    don't print informational messages
-#     --tag=TAG            use configuration variables from tag TAG
-# -v, --verbose            print informational messages (default)
-#     --version            print version information
-# -h, --help               print short or long help message
-#
-# MODE must be one of the following:
-#
-#       clean              remove files from the build directory
-#       compile            compile a source file into a libtool object
-#       execute            automatically set library path, then run a program
-#       finish             complete the installation of libtool libraries
-#       install            install libraries or executables
-#       link               create a library or an executable
-#       uninstall          remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-#       host-triplet:	$host
-#       shell:		$SHELL
-#       compiler:		$LTCC
-#       compiler flags:		$LTCFLAGS
-#       linker:		$LD (gnu? $with_gnu_ld)
-#       $progname:		(GNU libtool) 2.2.6 Debian-2.2.6a-4
-#       automake:		$automake_version
-#       autoconf:		$autoconf_version
-#
-# Report bugs to <[email protected]>.
-
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION="2.2.6 Debian-2.2.6a-4"
-TIMESTAMP=""
-package_revision=1.3012
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# NLS nuisances: We save the old values to restore during execute mode.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
-  eval "if test \"\${$lt_var+set}\" = set; then
-          save_$lt_var=\$$lt_var
-          $lt_var=C
-	  export $lt_var
-	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
-	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
-	fi"
-done
-
-$lt_unset CDPATH
-
-
-
-
-
-: ${CP="cp -f"}
-: ${ECHO="echo"}
-: ${EGREP="/bin/grep -E"}
-: ${FGREP="/bin/grep -F"}
-: ${GREP="/bin/grep"}
-: ${LN_S="ln -s"}
-: ${MAKE="make"}
-: ${MKDIR="mkdir"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-: ${SED="/bin/sed"}
-: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
-
-exit_status=$EXIT_SUCCESS
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" 	$lt_nl"
-
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-  # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-  if test "X$func_dirname_result" = "X${1}"; then
-    func_dirname_result="${3}"
-  else
-    func_dirname_result="$func_dirname_result${2}"
-  fi
-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
-
-# Generated shell functions inserted here.
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# The name of this program:
-# In the unlikely event $progname began with a '-', it would play havoc with
-# func_echo (imagine progname=-n), so we prepend ./ in that case:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
-case $progname in
-  -*) progname=./$progname ;;
-esac
-
-# Make sure we have an absolute path for reexecution:
-case $progpath in
-  [\\/]*|[A-Za-z]:\\*) ;;
-  *[\\/]*)
-     progdir=$func_dirname_result
-     progdir=`cd "$progdir" && pwd`
-     progpath="$progdir/$progname"
-     ;;
-  *)
-     save_IFS="$IFS"
-     IFS=:
-     for progdir in $PATH; do
-       IFS="$save_IFS"
-       test -x "$progdir/$progname" && break
-     done
-     IFS="$save_IFS"
-     test -n "$progdir" || progdir=`pwd`
-     progpath="$progdir/$progname"
-     ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
-  s/$bs4/&\\
-/g
-  s/^$bs2$dollar/$bs&/
-  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
-  s/\n//g"
-
-# Standard options:
-opt_dry_run=false
-opt_help=false
-opt_quiet=false
-opt_verbose=false
-opt_warning=:
-
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
-{
-    $ECHO "$progname${mode+: }$mode: $*"
-}
-
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
-    $opt_verbose && func_echo ${1+"$@"}
-
-    # A bug in bash halts the script if the last line of a function
-    # fails when set -e is in force, so we need another command to
-    # work around that:
-    :
-}
-
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
-{
-    $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
-}
-
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
-    $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
-
-    # bash bug again:
-    :
-}
-
-# func_fatal_error arg...
-# Echo program name prefixed message to standard error, and exit.
-func_fatal_error ()
-{
-    func_error ${1+"$@"}
-    exit $EXIT_FAILURE
-}
-
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
-    func_error ${1+"$@"}
-    func_fatal_error "$help"
-}
-help="Try \`$progname --help' for more information."  ## default
-
-
-# func_grep expression filename
-# Check whether EXPRESSION matches any line of FILENAME, without output.
-func_grep ()
-{
-    $GREP "$1" "$2" >/dev/null 2>&1
-}
-
-
-# func_mkdir_p directory-path
-# Make sure the entire path to DIRECTORY-PATH is available.
-func_mkdir_p ()
-{
-    my_directory_path="$1"
-    my_dir_list=
-
-    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
-
-      # Protect directory names starting with `-'
-      case $my_directory_path in
-        -*) my_directory_path="./$my_directory_path" ;;
-      esac
-
-      # While some portion of DIR does not yet exist...
-      while test ! -d "$my_directory_path"; do
-        # ...make a list in topmost first order.  Use a colon delimited
-	# list incase some portion of path contains whitespace.
-        my_dir_list="$my_directory_path:$my_dir_list"
-
-        # If the last portion added has no slash in it, the list is done
-        case $my_directory_path in */*) ;; *) break ;; esac
-
-        # ...otherwise throw away the child directory and loop
-        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
-      done
-      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
-
-      save_mkdir_p_IFS="$IFS"; IFS=':'
-      for my_dir in $my_dir_list; do
-	IFS="$save_mkdir_p_IFS"
-        # mkdir can fail with a `File exist' error if two processes
-        # try to create one of the directories concurrently.  Don't
-        # stop in that case!
-        $MKDIR "$my_dir" 2>/dev/null || :
-      done
-      IFS="$save_mkdir_p_IFS"
-
-      # Bail out if we (or some other process) failed to create a directory.
-      test -d "$my_directory_path" || \
-        func_fatal_error "Failed to create \`$1'"
-    fi
-}
-
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible.  If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
-    my_template="${TMPDIR-/tmp}/${1-$progname}"
-
-    if test "$opt_dry_run" = ":"; then
-      # Return a directory name, but don't create it in dry-run mode
-      my_tmpdir="${my_template}-$$"
-    else
-
-      # If mktemp works, use that first and foremost
-      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
-      if test ! -d "$my_tmpdir"; then
-        # Failing that, at least try and use $RANDOM to avoid a race
-        my_tmpdir="${my_template}-${RANDOM-0}$$"
-
-        save_mktempdir_umask=`umask`
-        umask 0077
-        $MKDIR "$my_tmpdir"
-        umask $save_mktempdir_umask
-      fi
-
-      # If we're not in dry-run mode, bomb out on failure
-      test -d "$my_tmpdir" || \
-        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
-    fi
-
-    $ECHO "X$my_tmpdir" | $Xsed
-}
-
-
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
-func_quote_for_eval ()
-{
-    case $1 in
-      *[\\\`\"\$]*)
-	func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
-      *)
-        func_quote_for_eval_unquoted_result="$1" ;;
-    esac
-
-    case $func_quote_for_eval_unquoted_result in
-      # Double-quote args containing shell metacharacters to delay
-      # word splitting, command substitution and and variable
-      # expansion for a subsequent eval.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
-        ;;
-      *)
-        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
-    esac
-}
-
-
-# func_quote_for_expand arg
-# Aesthetically quote ARG to be evaled later; same as above,
-# but do not quote variable references.
-func_quote_for_expand ()
-{
-    case $1 in
-      *[\\\`\"]*)
-	my_arg=`$ECHO "X$1" | $Xsed \
-	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
-      *)
-        my_arg="$1" ;;
-    esac
-
-    case $my_arg in
-      # Double-quote args containing shell metacharacters to delay
-      # word splitting and command substitution for a subsequent eval.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-        my_arg="\"$my_arg\""
-        ;;
-    esac
-
-    func_quote_for_expand_result="$my_arg"
-}
-
-
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
-# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.
-func_show_eval ()
-{
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
-
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
-      eval "func_echo $func_quote_for_expand_result"
-    }
-
-    if ${opt_dry_run-false}; then :; else
-      eval "$my_cmd"
-      my_status=$?
-      if test "$my_status" -eq 0; then :; else
-	eval "(exit $my_status); $my_fail_exp"
-      fi
-    fi
-}
-
-
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
-# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.  Use the saved locale for evaluation.
-func_show_eval_locale ()
-{
-    my_cmd="$1"
-    my_fail_exp="${2-:}"
-
-    ${opt_silent-false} || {
-      func_quote_for_expand "$my_cmd"
-      eval "func_echo $func_quote_for_expand_result"
-    }
-
-    if ${opt_dry_run-false}; then :; else
-      eval "$lt_user_locale
-	    $my_cmd"
-      my_status=$?
-      eval "$lt_safe_locale"
-      if test "$my_status" -eq 0; then :; else
-	eval "(exit $my_status); $my_fail_exp"
-      fi
-    fi
-}
-
-
-
-
-
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
-{
-    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
-        s/^# //
-	s/^# *$//
-        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
-        p
-     }' < "$progpath"
-     exit $?
-}
-
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
-{
-    $SED -n '/^# Usage:/,/# -h/ {
-        s/^# //
-	s/^# *$//
-	s/\$progname/'$progname'/
-	p
-    }' < "$progpath"
-    $ECHO
-    $ECHO "run \`$progname --help | more' for full usage"
-    exit $?
-}
-
-# func_help
-# Echo long help message to standard output and exit.
-func_help ()
-{
-    $SED -n '/^# Usage:/,/# Report bugs to/ {
-        s/^# //
-	s/^# *$//
-	s*\$progname*'$progname'*
-	s*\$host*'"$host"'*
-	s*\$SHELL*'"$SHELL"'*
-	s*\$LTCC*'"$LTCC"'*
-	s*\$LTCFLAGS*'"$LTCFLAGS"'*
-	s*\$LD*'"$LD"'*
-	s/\$with_gnu_ld/'"$with_gnu_ld"'/
-	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
-	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
-	p
-     }' < "$progpath"
-    exit $?
-}
-
-# func_missing_arg argname
-# Echo program name prefixed message to standard error and set global
-# exit_cmd.
-func_missing_arg ()
-{
-    func_error "missing argument for $1"
-    exit_cmd=exit
-}
-
-exit_cmd=:
-
-
-
-
-
-# Check that we have a working $ECHO.
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
-  # Yippee, $ECHO works!
-  :
-else
-  # Restart under the correct shell, and then maybe $ECHO will work.
-  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit $EXIT_SUCCESS
-fi
-
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
-
-# Global variables.
-# $mode is unset
-nonopt=
-execute_dlfiles=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
-
-opt_dry_run=false
-opt_duplicate_deps=false
-opt_silent=false
-opt_debug=:
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-# func_fatal_configuration arg...
-# Echo program name prefixed message to standard error, followed by
-# a configuration failure hint, and exit.
-func_fatal_configuration ()
-{
-    func_error ${1+"$@"}
-    func_error "See the $PACKAGE documentation for more information."
-    func_fatal_error "Fatal configuration error."
-}
-
-
-# func_config
-# Display the configuration for all the tags in this script.
-func_config ()
-{
-    re_begincf='^# ### BEGIN LIBTOOL'
-    re_endcf='^# ### END LIBTOOL'
-
-    # Default configuration.
-    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
-
-    # Now print the configurations for the tags.
-    for tagname in $taglist; do
-      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
-    done
-
-    exit $?
-}
-
-# func_features
-# Display the features supported by this script.
-func_features ()
-{
-    $ECHO "host: $host"
-    if test "$build_libtool_libs" = yes; then
-      $ECHO "enable shared libraries"
-    else
-      $ECHO "disable shared libraries"
-    fi
-    if test "$build_old_libs" = yes; then
-      $ECHO "enable static libraries"
-    else
-      $ECHO "disable static libraries"
-    fi
-
-    exit $?
-}
-
-# func_enable_tag tagname
-# Verify that TAGNAME is valid, and either flag an error and exit, or
-# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
-# variable here.
-func_enable_tag ()
-{
-  # Global variable:
-  tagname="$1"
-
-  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
-  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
-  sed_extractcf="/$re_begincf/,/$re_endcf/p"
-
-  # Validate tagname.
-  case $tagname in
-    *[!-_A-Za-z0-9,/]*)
-      func_fatal_error "invalid tag name: $tagname"
-      ;;
-  esac
-
-  # Don't test for the "default" C tag, as we know it's
-  # there but not specially marked.
-  case $tagname in
-    CC) ;;
-    *)
-      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
-	taglist="$taglist $tagname"
-
-	# Evaluate the configuration.  Be careful to quote the path
-	# and the sed script, to avoid splitting on whitespace, but
-	# also don't use non-portable quotes within backquotes within
-	# quotes we have to do it in 2 steps:
-	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
-	eval "$extractedcf"
-      else
-	func_error "ignoring unknown tag $tagname"
-      fi
-      ;;
-  esac
-}
-
-# Parse options once, thoroughly.  This comes as soon as possible in
-# the script to make things like `libtool --version' happen quickly.
-{
-
-  # Shorthand for --mode=foo, only valid as the first argument
-  case $1 in
-  clean|clea|cle|cl)
-    shift; set dummy --mode clean ${1+"$@"}; shift
-    ;;
-  compile|compil|compi|comp|com|co|c)
-    shift; set dummy --mode compile ${1+"$@"}; shift
-    ;;
-  execute|execut|execu|exec|exe|ex|e)
-    shift; set dummy --mode execute ${1+"$@"}; shift
-    ;;
-  finish|finis|fini|fin|fi|f)
-    shift; set dummy --mode finish ${1+"$@"}; shift
-    ;;
-  install|instal|insta|inst|ins|in|i)
-    shift; set dummy --mode install ${1+"$@"}; shift
-    ;;
-  link|lin|li|l)
-    shift; set dummy --mode link ${1+"$@"}; shift
-    ;;
-  uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-    shift; set dummy --mode uninstall ${1+"$@"}; shift
-    ;;
-  esac
-
-  # Parse non-mode specific arguments:
-  while test "$#" -gt 0; do
-    opt="$1"
-    shift
-
-    case $opt in
-      --config)		func_config					;;
-
-      --debug)		preserve_args="$preserve_args $opt"
-			func_echo "enabling shell trace mode"
-			opt_debug='set -x'
-			$opt_debug
-			;;
-
-      -dlopen)		test "$#" -eq 0 && func_missing_arg "$opt" && break
-			execute_dlfiles="$execute_dlfiles $1"
-			shift
-			;;
-
-      --dry-run | -n)	opt_dry_run=:					;;
-      --features)       func_features					;;
-      --finish)		mode="finish"					;;
-
-      --mode)		test "$#" -eq 0 && func_missing_arg "$opt" && break
-			case $1 in
-			  # Valid mode arguments:
-			  clean)	;;
-			  compile)	;;
-			  execute)	;;
-			  finish)	;;
-			  install)	;;
-			  link)		;;
-			  relink)	;;
-			  uninstall)	;;
-
-			  # Catch anything else as an error
-			  *) func_error "invalid argument for $opt"
-			     exit_cmd=exit
-			     break
-			     ;;
-		        esac
-
-			mode="$1"
-			shift
-			;;
-
-      --preserve-dup-deps)
-			opt_duplicate_deps=:				;;
-
-      --quiet|--silent)	preserve_args="$preserve_args $opt"
-			opt_silent=:
-			;;
-
-      --verbose| -v)	preserve_args="$preserve_args $opt"
-			opt_silent=false
-			;;
-
-      --tag)		test "$#" -eq 0 && func_missing_arg "$opt" && break
-			preserve_args="$preserve_args $opt $1"
-			func_enable_tag "$1"	# tagname is set here
-			shift
-			;;
-
-      # Separate optargs to long options:
-      -dlopen=*|--mode=*|--tag=*)
-			func_opt_split "$opt"
-			set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
-			shift
-			;;
-
-      -\?|-h)		func_usage					;;
-      --help)		opt_help=:					;;
-      --version)	func_version					;;
-
-      -*)		func_fatal_help "unrecognized option \`$opt'"	;;
-
-      *)		nonopt="$opt"
-			break
-			;;
-    esac
-  done
-
-
-  case $host in
-    *cygwin* | *mingw* | *pw32* | *cegcc*)
-      # don't eliminate duplications in $postdeps and $predeps
-      opt_duplicate_compiler_generated_deps=:
-      ;;
-    *)
-      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
-      ;;
-  esac
-
-  # Having warned about all mis-specified options, bail out if
-  # anything was wrong.
-  $exit_cmd $EXIT_FAILURE
-}
-
-# func_check_version_match
-# Ensure that we are using m4 macros, and libtool script from the same
-# release of libtool.
-func_check_version_match ()
-{
-  if test "$package_revision" != "$macro_revision"; then
-    if test "$VERSION" != "$macro_version"; then
-      if test -z "$macro_version"; then
-        cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from an older release.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
-      else
-        cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
-      fi
-    else
-      cat >&2 <<_LT_EOF
-$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
-$progname: of $PACKAGE $VERSION and run autoconf again.
-_LT_EOF
-    fi
-
-    exit $EXIT_MISMATCH
-  fi
-}
-
-
-## ----------- ##
-##    Main.    ##
-## ----------- ##
-
-$opt_help || {
-  # Sanity checks first:
-  func_check_version_match
-
-  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-    func_fatal_configuration "not configured to build any kind of library"
-  fi
-
-  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
-
-
-  # Darwin sucks
-  eval std_shrext=\"$shrext_cmds\"
-
-
-  # Only execute mode is allowed to have -dlopen flags.
-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    func_error "unrecognized option \`-dlopen'"
-    $ECHO "$help" 1>&2
-    exit $EXIT_FAILURE
-  fi
-
-  # Change the help message to a mode-specific one.
-  generic_help="$help"
-  help="Try \`$progname --help --mode=$mode' for more information."
-}
-
-
-# func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_lalib_p ()
-{
-    test -f "$1" &&
-      $SED -e 4q "$1" 2>/dev/null \
-        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
-}
-
-# func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function implements the same check as func_lalib_p without
-# resorting to external programs.  To this end, it redirects stdin and
-# closes it afterwards, without saving the original file descriptor.
-# As a safety measure, use it only where a negative result would be
-# fatal anyway.  Works if `file' does not exist.
-func_lalib_unsafe_p ()
-{
-    lalib_p=no
-    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
-	for lalib_p_l in 1 2 3 4
-	do
-	    read lalib_p_line
-	    case "$lalib_p_line" in
-		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
-	    esac
-	done
-	exec 0<&5 5<&-
-    fi
-    test "$lalib_p" = yes
-}
-
-# func_ltwrapper_script_p file
-# True iff FILE is a libtool wrapper script
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_script_p ()
-{
-    func_lalib_p "$1"
-}
-
-# func_ltwrapper_executable_p file
-# True iff FILE is a libtool wrapper executable
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_executable_p ()
-{
-    func_ltwrapper_exec_suffix=
-    case $1 in
-    *.exe) ;;
-    *) func_ltwrapper_exec_suffix=.exe ;;
-    esac
-    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
-}
-
-# func_ltwrapper_scriptname file
-# Assumes file is an ltwrapper_executable
-# uses $file to determine the appropriate filename for a
-# temporary ltwrapper_script.
-func_ltwrapper_scriptname ()
-{
-    func_ltwrapper_scriptname_result=""
-    if func_ltwrapper_executable_p "$1"; then
-	func_dirname_and_basename "$1" "" "."
-	func_stripname '' '.exe' "$func_basename_result"
-	func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
-    fi
-}
-
-# func_ltwrapper_p file
-# True iff FILE is a libtool wrapper script or wrapper executable
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_p ()
-{
-    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
-}
-
-
-# func_execute_cmds commands fail_cmd
-# Execute tilde-delimited COMMANDS.
-# If FAIL_CMD is given, eval that upon failure.
-# FAIL_CMD may read-access the current command in variable CMD!
-func_execute_cmds ()
-{
-    $opt_debug
-    save_ifs=$IFS; IFS='~'
-    for cmd in $1; do
-      IFS=$save_ifs
-      eval cmd=\"$cmd\"
-      func_show_eval "$cmd" "${2-:}"
-    done
-    IFS=$save_ifs
-}
-
-
-# func_source file
-# Source FILE, adding directory component if necessary.
-# Note that it is not necessary on cygwin/mingw to append a dot to
-# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
-# behavior happens only for exec(3), not for open(2)!  Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
-func_source ()
-{
-    $opt_debug
-    case $1 in
-    */* | *\\*)	. "$1" ;;
-    *)		. "./$1" ;;
-    esac
-}
-
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
-    $opt_debug
-    if test -n "$available_tags" && test -z "$tagname"; then
-      CC_quoted=
-      for arg in $CC; do
-        func_quote_for_eval "$arg"
-	CC_quoted="$CC_quoted $func_quote_for_eval_result"
-      done
-      case $@ in
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
-      # Blanks at the start of $base_compile will cause this to fail
-      # if we don't check for them as well.
-      *)
-	for z in $available_tags; do
-	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
-	    CC_quoted=
-	    for arg in $CC; do
-	      # Double-quote args containing other shell metacharacters.
-	      func_quote_for_eval "$arg"
-	      CC_quoted="$CC_quoted $func_quote_for_eval_result"
-	    done
-	    case "$@ " in
-	      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
-	      # The compiler in the base compile command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  func_echo "unable to infer tagged configuration"
-	  func_fatal_error "specify a tag with \`--tag'"
-#	else
-#	  func_verbose "using $tagname tagged configuration"
-	fi
-	;;
-      esac
-    fi
-}
-
-
-
-# func_write_libtool_object output_name pic_name nonpic_name
-# Create a libtool object file (analogous to a ".la" file),
-# but don't create it if we're doing a dry run.
-func_write_libtool_object ()
-{
-    write_libobj=${1}
-    if test "$build_libtool_libs" = yes; then
-      write_lobj=\'${2}\'
-    else
-      write_lobj=none
-    fi
-
-    if test "$build_old_libs" = yes; then
-      write_oldobj=\'${3}\'
-    else
-      write_oldobj=none
-    fi
-
-    $opt_dry_run || {
-      cat >${write_libobj}T <<EOF
-# $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-pic_object=$write_lobj
-
-# Name of the non-PIC object
-non_pic_object=$write_oldobj
-
-EOF
-      $MV "${write_libobj}T" "${write_libobj}"
-    }
-}
-
-# func_mode_compile arg...
-func_mode_compile ()
-{
-    $opt_debug
-    # Get the compilation command and the source file.
-    base_compile=
-    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
-    suppress_opt=yes
-    suppress_output=
-    arg_mode=normal
-    libobj=
-    later=
-    pie_flag=
-
-    for arg
-    do
-      case $arg_mode in
-      arg  )
-	# do not "continue".  Instead, add this to base_compile
-	lastarg="$arg"
-	arg_mode=normal
-	;;
-
-      target )
-	libobj="$arg"
-	arg_mode=normal
-	continue
-	;;
-
-      normal )
-	# Accept any command-line options.
-	case $arg in
-	-o)
-	  test -n "$libobj" && \
-	    func_fatal_error "you cannot specify \`-o' more than once"
-	  arg_mode=target
-	  continue
-	  ;;
-
-	-pie | -fpie | -fPIE)
-          pie_flag="$pie_flag $arg"
-	  continue
-	  ;;
-
-	-shared | -static | -prefer-pic | -prefer-non-pic)
-	  later="$later $arg"
-	  continue
-	  ;;
-
-	-no-suppress)
-	  suppress_opt=no
-	  continue
-	  ;;
-
-	-Xcompiler)
-	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
-	  continue      #  The current "srcfile" will either be retained or
-	  ;;            #  replaced later.  I would guess that would be a bug.
-
-	-Wc,*)
-	  func_stripname '-Wc,' '' "$arg"
-	  args=$func_stripname_result
-	  lastarg=
-	  save_ifs="$IFS"; IFS=','
-	  for arg in $args; do
-	    IFS="$save_ifs"
-	    func_quote_for_eval "$arg"
-	    lastarg="$lastarg $func_quote_for_eval_result"
-	  done
-	  IFS="$save_ifs"
-	  func_stripname ' ' '' "$lastarg"
-	  lastarg=$func_stripname_result
-
-	  # Add the arguments to base_compile.
-	  base_compile="$base_compile $lastarg"
-	  continue
-	  ;;
-
-	*)
-	  # Accept the current argument as the source file.
-	  # The previous "srcfile" becomes the current argument.
-	  #
-	  lastarg="$srcfile"
-	  srcfile="$arg"
-	  ;;
-	esac  #  case $arg
-	;;
-      esac    #  case $arg_mode
-
-      # Aesthetically quote the previous argument.
-      func_quote_for_eval "$lastarg"
-      base_compile="$base_compile $func_quote_for_eval_result"
-    done # for arg
-
-    case $arg_mode in
-    arg)
-      func_fatal_error "you must specify an argument for -Xcompile"
-      ;;
-    target)
-      func_fatal_error "you must specify a target with \`-o'"
-      ;;
-    *)
-      # Get the name of the library object.
-      test -z "$libobj" && {
-	func_basename "$srcfile"
-	libobj="$func_basename_result"
-      }
-      ;;
-    esac
-
-    # Recognize several different file suffixes.
-    # If the user specifies -o file.o, it is replaced with file.lo
-    case $libobj in
-    *.[cCFSifmso] | \
-    *.ada | *.adb | *.ads | *.asm | \
-    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
-    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
-      func_xform "$libobj"
-      libobj=$func_xform_result
-      ;;
-    esac
-
-    case $libobj in
-    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
-    *)
-      func_fatal_error "cannot determine name of library object from \`$libobj'"
-      ;;
-    esac
-
-    func_infer_tag $base_compile
-
-    for arg in $later; do
-      case $arg in
-      -shared)
-	test "$build_libtool_libs" != yes && \
-	  func_fatal_configuration "can not build a shared library"
-	build_old_libs=no
-	continue
-	;;
-
-      -static)
-	build_libtool_libs=no
-	build_old_libs=yes
-	continue
-	;;
-
-      -prefer-pic)
-	pic_mode=yes
-	continue
-	;;
-
-      -prefer-non-pic)
-	pic_mode=no
-	continue
-	;;
-      esac
-    done
-
-    func_quote_for_eval "$libobj"
-    test "X$libobj" != "X$func_quote_for_eval_result" \
-      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
-      && func_warning "libobj name \`$libobj' may not contain shell special characters."
-    func_dirname_and_basename "$obj" "/" ""
-    objname="$func_basename_result"
-    xdir="$func_dirname_result"
-    lobj=${xdir}$objdir/$objname
-
-    test -z "$base_compile" && \
-      func_fatal_help "you must specify a compilation command"
-
-    # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
-      removelist="$obj $lobj $libobj ${libobj}T"
-    else
-      removelist="$lobj $libobj ${libobj}T"
-    fi
-
-    # On Cygwin there's no "real" PIC flag so we must build both object types
-    case $host_os in
-    cygwin* | mingw* | pw32* | os2* | cegcc*)
-      pic_mode=default
-      ;;
-    esac
-    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
-      # non-PIC code in shared libraries is not supported
-      pic_mode=default
-    fi
-
-    # Calculate the filename of the output object if compiler does
-    # not support -o with -c
-    if test "$compiler_c_o" = no; then
-      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
-      lockfile="$output_obj.lock"
-    else
-      output_obj=
-      need_locks=no
-      lockfile=
-    fi
-
-    # Lock this critical section if it is needed
-    # We use this script file to make the link, it avoids creating a new file
-    if test "$need_locks" = yes; then
-      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
-	func_echo "Waiting for $lockfile to be removed"
-	sleep 2
-      done
-    elif test "$need_locks" = warn; then
-      if test -f "$lockfile"; then
-	$ECHO "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$opt_dry_run || $RM $removelist
-	exit $EXIT_FAILURE
-      fi
-      removelist="$removelist $output_obj"
-      $ECHO "$srcfile" > "$lockfile"
-    fi
-
-    $opt_dry_run || $RM $removelist
-    removelist="$removelist $lockfile"
-    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
-
-    if test -n "$fix_srcfile_path"; then
-      eval srcfile=\"$fix_srcfile_path\"
-    fi
-    func_quote_for_eval "$srcfile"
-    qsrcfile=$func_quote_for_eval_result
-
-    # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
-      # Without this assignment, base_compile gets emptied.
-      fbsd_hideous_sh_bug=$base_compile
-
-      if test "$pic_mode" != no; then
-	command="$base_compile $qsrcfile $pic_flag"
-      else
-	# Don't build PIC code
-	command="$base_compile $qsrcfile"
-      fi
-
-      func_mkdir_p "$xdir$objdir"
-
-      if test -z "$output_obj"; then
-	# Place PIC objects in $objdir
-	command="$command -o $lobj"
-      fi
-
-      func_show_eval_locale "$command"	\
-          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$ECHO "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$opt_dry_run || $RM $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed, then go on to compile the next one
-      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-	func_show_eval '$MV "$output_obj" "$lobj"' \
-	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
-      fi
-
-      # Allow error messages only from the first compilation.
-      if test "$suppress_opt" = yes; then
-	suppress_output=' >/dev/null 2>&1'
-      fi
-    fi
-
-    # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      if test "$pic_mode" != yes; then
-	# Don't build PIC code
-	command="$base_compile $qsrcfile$pie_flag"
-      else
-	command="$base_compile $qsrcfile $pic_flag"
-      fi
-      if test "$compiler_c_o" = yes; then
-	command="$command -o $obj"
-      fi
-
-      # Suppress compiler output if we already did a PIC compilation.
-      command="$command$suppress_output"
-      func_show_eval_locale "$command" \
-        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$ECHO "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$opt_dry_run || $RM $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed
-      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-	func_show_eval '$MV "$output_obj" "$obj"' \
-	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
-      fi
-    fi
-
-    $opt_dry_run || {
-      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
-
-      # Unlock the critical section if it was locked
-      if test "$need_locks" != no; then
-	removelist=$lockfile
-        $RM "$lockfile"
-      fi
-    }
-
-    exit $EXIT_SUCCESS
-}
-
-$opt_help || {
-test "$mode" = compile && func_mode_compile ${1+"$@"}
-}
-
-func_mode_help ()
-{
-    # We need to display help for each of the modes.
-    case $mode in
-      "")
-        # Generic help is extracted from the usage comments
-        # at the start of this file.
-        func_help
-        ;;
-
-      clean)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-        ;;
-
-      compile)
-      $ECHO \
-"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -no-suppress      do not suppress compiler output for multiple passes
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
-  -shared           do not build a \`.o' file suitable for static linking
-  -static           only build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-        ;;
-
-      execute)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-        ;;
-
-      finish)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-        ;;
-
-      install)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The following components of INSTALL-COMMAND are treated specially:
-
-  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-        ;;
-
-      link)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-                    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-                    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
-  -precious-files-regex REGEX
-                    don't remove output files matching REGEX
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -shared           only do dynamic linking of libtool libraries
-  -shrext SUFFIX    override the standard shared library file extension
-  -static           do not do any dynamic linking of uninstalled libtool libraries
-  -static-libtool-libs
-                    do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-                    specify library version info [each variable defaults to 0]
-  -weak LIBNAME     declare that the target provides the LIBNAME interface
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-        ;;
-
-      uninstall)
-        $ECHO \
-"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-        ;;
-
-      *)
-        func_fatal_help "invalid operation mode \`$mode'"
-        ;;
-    esac
-
-    $ECHO
-    $ECHO "Try \`$progname --help' for more information about other modes."
-
-    exit $?
-}
-
-  # Now that we've collected a possible --mode arg, show help if necessary
-  $opt_help && func_mode_help
-
-
-# func_mode_execute arg...
-func_mode_execute ()
-{
-    $opt_debug
-    # The first argument is the command name.
-    cmd="$nonopt"
-    test -z "$cmd" && \
-      func_fatal_help "you must specify a COMMAND"
-
-    # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
-      test -f "$file" \
-	|| func_fatal_help "\`$file' is not a file"
-
-      dir=
-      case $file in
-      *.la)
-	# Check to see that this really is a libtool archive.
-	func_lalib_unsafe_p "$file" \
-	  || func_fatal_help "\`$lib' is not a valid libtool archive"
-
-	# Read the libtool library.
-	dlname=
-	library_names=
-	func_source "$file"
-
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && \
-	    func_warning "\`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
-
-	func_dirname "$file" "" "."
-	dir="$func_dirname_result"
-
-	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
-	else
-	  if test ! -f "$dir/$dlname"; then
-	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
-	  fi
-	fi
-	;;
-
-      *.lo)
-	# Just add the directory containing the .lo file.
-	func_dirname "$file" "" "."
-	dir="$func_dirname_result"
-	;;
-
-      *)
-	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
-	continue
-	;;
-      esac
-
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
-
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-      else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
-
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
-
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case $file in
-      -*) ;;
-      *)
-	# Do a test to see if this is really a libtool program.
-	if func_ltwrapper_script_p "$file"; then
-	  func_source "$file"
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	elif func_ltwrapper_executable_p "$file"; then
-	  func_ltwrapper_scriptname "$file"
-	  func_source "$func_ltwrapper_scriptname_result"
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-	;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      func_quote_for_eval "$file"
-      args="$args $func_quote_for_eval_result"
-    done
-
-    if test "X$opt_dry_run" = Xfalse; then
-      if test -n "$shlibpath_var"; then
-	# Export the shlibpath_var.
-	eval "export $shlibpath_var"
-      fi
-
-      # Restore saved environment variables
-      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-      do
-	eval "if test \"\${save_$lt_var+set}\" = set; then
-                $lt_var=\$save_$lt_var; export $lt_var
-	      else
-		$lt_unset $lt_var
-	      fi"
-      done
-
-      # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-	$ECHO "export $shlibpath_var"
-      fi
-      $ECHO "$cmd$args"
-      exit $EXIT_SUCCESS
-    fi
-}
-
-test "$mode" = execute && func_mode_execute ${1+"$@"}
-
-
-# func_mode_finish arg...
-func_mode_finish ()
-{
-    $opt_debug
-    libdirs="$nonopt"
-    admincmds=
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-	libdirs="$libdirs $dir"
-      done
-
-      for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
-'"$cmd"'"'
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $opt_dry_run || eval "$cmds" || admincmds="$admincmds
-       $cmds"
-	fi
-      done
-    fi
-
-    # Exit here if they wanted silent mode.
-    $opt_silent && exit $EXIT_SUCCESS
-
-    $ECHO "X----------------------------------------------------------------------" | $Xsed
-    $ECHO "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      $ECHO "   $libdir"
-    done
-    $ECHO
-    $ECHO "If you ever happen to want to link against installed libraries"
-    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
-    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    $ECHO "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      $ECHO "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
-      $ECHO "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
-
-      $ECHO "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      $ECHO "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    $ECHO
-
-    $ECHO "See any operating system documentation about shared libraries for"
-    case $host in
-      solaris2.[6789]|solaris2.1[0-9])
-        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
-	$ECHO "pages."
-	;;
-      *)
-        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
-        ;;
-    esac
-    $ECHO "X----------------------------------------------------------------------" | $Xsed
-    exit $EXIT_SUCCESS
-}
-
-test "$mode" = finish && func_mode_finish ${1+"$@"}
-
-
-# func_mode_install arg...
-func_mode_install ()
-{
-    $opt_debug
-    # There may be an optional sh(1) argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-       # Allow the use of GNU shtool's install command.
-       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
-      # Aesthetically quote it.
-      func_quote_for_eval "$nonopt"
-      install_prog="$func_quote_for_eval_result "
-      arg=$1
-      shift
-    else
-      install_prog=
-      arg=$nonopt
-    fi
-
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    func_quote_for_eval "$arg"
-    install_prog="$install_prog$func_quote_for_eval_result"
-
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=no
-    stripme=
-    for arg
-    do
-      if test -n "$dest"; then
-	files="$files $dest"
-	dest=$arg
-	continue
-      fi
-
-      case $arg in
-      -d) isdir=yes ;;
-      -f)
-	case " $install_prog " in
-	*[\\\ /]cp\ *) ;;
-	*) prev=$arg ;;
-	esac
-	;;
-      -g | -m | -o)
-	prev=$arg
-	;;
-      -s)
-	stripme=" -s"
-	continue
-	;;
-      -*)
-	;;
-      *)
-	# If the previous option needed an argument, then skip it.
-	if test -n "$prev"; then
-	  prev=
-	else
-	  dest=$arg
-	  continue
-	fi
-	;;
-      esac
-
-      # Aesthetically quote the argument.
-      func_quote_for_eval "$arg"
-      install_prog="$install_prog $func_quote_for_eval_result"
-    done
-
-    test -z "$install_prog" && \
-      func_fatal_help "you must specify an install program"
-
-    test -n "$prev" && \
-      func_fatal_help "the \`$prev' option requires an argument"
-
-    if test -z "$files"; then
-      if test -z "$dest"; then
-	func_fatal_help "no file or destination specified"
-      else
-	func_fatal_help "you must specify a destination"
-      fi
-    fi
-
-    # Strip any trailing slash from the destination.
-    func_stripname '' '/' "$dest"
-    dest=$func_stripname_result
-
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
-      destname=
-    else
-      func_dirname_and_basename "$dest" "" "."
-      destdir="$func_dirname_result"
-      destname="$func_basename_result"
-
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files; shift
-      test "$#" -gt 1 && \
-	func_fatal_help "\`$dest' is not a directory"
-    fi
-    case $destdir in
-    [\\/]* | [A-Za-z]:[\\/]*) ;;
-    *)
-      for file in $files; do
-	case $file in
-	*.lo) ;;
-	*)
-	  func_fatal_help "\`$destdir' must be an absolute directory name"
-	  ;;
-	esac
-      done
-      ;;
-    esac
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
-
-      # Do each installation.
-      case $file in
-      *.$libext)
-	# Do the static libraries later.
-	staticlibs="$staticlibs $file"
-	;;
-
-      *.la)
-	# Check to see that this really is a libtool archive.
-	func_lalib_unsafe_p "$file" \
-	  || func_fatal_help "\`$file' is not a valid libtool archive"
-
-	library_names=
-	old_library=
-	relink_command=
-	func_source "$file"
-
-	# Add the libdir to current_libdirs if it is the destination.
-	if test "X$destdir" = "X$libdir"; then
-	  case "$current_libdirs " in
-	  *" $libdir "*) ;;
-	  *) current_libdirs="$current_libdirs $libdir" ;;
-	  esac
-	else
-	  # Note the libdir as a future libdir.
-	  case "$future_libdirs " in
-	  *" $libdir "*) ;;
-	  *) future_libdirs="$future_libdirs $libdir" ;;
-	  esac
-	fi
-
-	func_dirname "$file" "/" ""
-	dir="$func_dirname_result"
-	dir="$dir$objdir"
-
-	if test -n "$relink_command"; then
-	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
-
-	  # Don't allow the user to place us outside of our expected
-	  # location b/c this prevents finding dependent libraries that
-	  # are installed to the same prefix.
-	  # At present, this check doesn't affect windows .dll's that
-	  # are installed into $libdir/../bin (currently, that works fine)
-	  # but it's something to keep an eye on.
-	  test "$inst_prefix_dir" = "$destdir" && \
-	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
-
-	  if test -n "$inst_prefix_dir"; then
-	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
-	  else
-	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
-	  fi
-
-	  func_warning "relinking \`$file'"
-	  func_show_eval "$relink_command" \
-	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
-	fi
-
-	# See the names of the shared library.
-	set dummy $library_names; shift
-	if test -n "$1"; then
-	  realname="$1"
-	  shift
-
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
-
-	  # Install the shared library and build the symlinks.
-	  func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
-	      'exit $?'
-	  tstripme="$stripme"
-	  case $host_os in
-	  cygwin* | mingw* | pw32* | cegcc*)
-	    case $realname in
-	    *.dll.a)
-	      tstripme=""
-	      ;;
-	    esac
-	    ;;
-	  esac
-	  if test -n "$tstripme" && test -n "$striplib"; then
-	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
-	  fi
-
-	  if test "$#" -gt 0; then
-	    # Delete the old symlinks, and create new ones.
-	    # Try `ln -sf' first, because the `ln' binary might depend on
-	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
-	    # so we also need to try rm && ln -s.
-	    for linkname
-	    do
-	      test "$linkname" != "$realname" \
-		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
-	    done
-	  fi
-
-	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
-	  func_execute_cmds "$postinstall_cmds" 'exit $?'
-	fi
-
-	# Install the pseudo-library for information purposes.
-	func_basename "$file"
-	name="$func_basename_result"
-	instname="$dir/$name"i
-	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
-
-	# Maybe install the static library, too.
-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-	;;
-
-      *.lo)
-	# Install (i.e. copy) a libtool object.
-
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  func_basename "$file"
-	  destfile="$func_basename_result"
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Deduce the name of the destination old-style object file.
-	case $destfile in
-	*.lo)
-	  func_lo2o "$destfile"
-	  staticdest=$func_lo2o_result
-	  ;;
-	*.$objext)
-	  staticdest="$destfile"
-	  destfile=
-	  ;;
-	*)
-	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
-	  ;;
-	esac
-
-	# Install the libtool object if requested.
-	test -n "$destfile" && \
-	  func_show_eval "$install_prog $file $destfile" 'exit $?'
-
-	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
-	  # Deduce the name of the old-style object file.
-	  func_lo2o "$file"
-	  staticobj=$func_lo2o_result
-	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
-	fi
-	exit $EXIT_SUCCESS
-	;;
-
-      *)
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  func_basename "$file"
-	  destfile="$func_basename_result"
-	  destfile="$destdir/$destfile"
-	fi
-
-	# If the file is missing, and there is a .exe on the end, strip it
-	# because it is most likely a libtool script we actually want to
-	# install
-	stripped_ext=""
-	case $file in
-	  *.exe)
-	    if test ! -f "$file"; then
-	      func_stripname '' '.exe' "$file"
-	      file=$func_stripname_result
-	      stripped_ext=".exe"
-	    fi
-	    ;;
-	esac
-
-	# Do a test to see if this is really a libtool program.
-	case $host in
-	*cygwin* | *mingw*)
-	    if func_ltwrapper_executable_p "$file"; then
-	      func_ltwrapper_scriptname "$file"
-	      wrapper=$func_ltwrapper_scriptname_result
-	    else
-	      func_stripname '' '.exe' "$file"
-	      wrapper=$func_stripname_result
-	    fi
-	    ;;
-	*)
-	    wrapper=$file
-	    ;;
-	esac
-	if func_ltwrapper_script_p "$wrapper"; then
-	  notinst_deplibs=
-	  relink_command=
-
-	  func_source "$wrapper"
-
-	  # Check the variables that should have been set.
-	  test -z "$generated_by_libtool_version" && \
-	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
-
-	  finalize=yes
-	  for lib in $notinst_deplibs; do
-	    # Check to see that each library is installed.
-	    libdir=
-	    if test -f "$lib"; then
-	      func_source "$lib"
-	    fi
-	    libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      func_warning "\`$lib' has not been installed in \`$libdir'"
-	      finalize=no
-	    fi
-	  done
-
-	  relink_command=
-	  func_source "$wrapper"
-
-	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    $opt_dry_run || {
-	      if test "$finalize" = yes; then
-	        tmpdir=`func_mktempdir`
-		func_basename "$file$stripped_ext"
-		file="$func_basename_result"
-	        outputname="$tmpdir/$file"
-	        # Replace the output file specification.
-	        relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-
-	        $opt_silent || {
-	          func_quote_for_expand "$relink_command"
-		  eval "func_echo $func_quote_for_expand_result"
-	        }
-	        if eval "$relink_command"; then :
-	          else
-		  func_error "error: relink \`$file' with the above command before installing it"
-		  $opt_dry_run || ${RM}r "$tmpdir"
-		  continue
-	        fi
-	        file="$outputname"
-	      else
-	        func_warning "cannot relink \`$file'"
-	      fi
-	    }
-	  else
-	    # Install the binary that we compiled earlier.
-	    file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-	  fi
-	fi
-
-	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyway
-	case $install_prog,$host in
-	*/usr/bin/install*,*cygwin*)
-	  case $file:$destfile in
-	  *.exe:*.exe)
-	    # this is ok
-	    ;;
-	  *.exe:*)
-	    destfile=$destfile.exe
-	    ;;
-	  *:*.exe)
-	    func_stripname '' '.exe' "$destfile"
-	    destfile=$func_stripname_result
-	    ;;
-	  esac
-	  ;;
-	esac
-	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
-	$opt_dry_run || if test -n "$outputname"; then
-	  ${RM}r "$tmpdir"
-	fi
-	;;
-      esac
-    done
-
-    for file in $staticlibs; do
-      func_basename "$file"
-      name="$func_basename_result"
-
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
-
-      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
-
-      if test -n "$stripme" && test -n "$old_striplib"; then
-	func_show_eval "$old_striplib $oldlib" 'exit $?'
-      fi
-
-      # Do each command in the postinstall commands.
-      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
-    done
-
-    test -n "$future_libdirs" && \
-      func_warning "remember to run \`$progname --finish$future_libdirs'"
-
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      $opt_dry_run && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-    else
-      exit $EXIT_SUCCESS
-    fi
-}
-
-test "$mode" = install && func_mode_install ${1+"$@"}
-
-
-# func_generate_dlsyms outputname originator pic_p
-# Extract symbols from dlprefiles and create ${outputname}S.o with
-# a dlpreopen symbol table.
-func_generate_dlsyms ()
-{
-    $opt_debug
-    my_outputname="$1"
-    my_originator="$2"
-    my_pic_p="${3-no}"
-    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
-    my_dlsyms=
-
-    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-      if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	my_dlsyms="${my_outputname}S.c"
-      else
-	func_error "not configured to extract global symbols from dlpreopened files"
-      fi
-    fi
-
-    if test -n "$my_dlsyms"; then
-      case $my_dlsyms in
-      "") ;;
-      *.c)
-	# Discover the nlist of each of the dlfiles.
-	nlist="$output_objdir/${my_outputname}.nm"
-
-	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
-
-	# Parse the name list into a source file.
-	func_verbose "creating $output_objdir/$my_dlsyms"
-
-	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* External symbol declarations for the compiler. */\
-"
-
-	if test "$dlself" = yes; then
-	  func_verbose "generating symbol list for \`$output'"
-
-	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
-
-	  # Add our own program objects to the symbol list.
-	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	  for progfile in $progfiles; do
-	    func_verbose "extracting global C symbols from \`$progfile'"
-	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
-	  done
-
-	  if test -n "$exclude_expsyms"; then
-	    $opt_dry_run || {
-	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      eval '$MV "$nlist"T "$nlist"'
-	    }
-	  fi
-
-	  if test -n "$export_symbols_regex"; then
-	    $opt_dry_run || {
-	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      eval '$MV "$nlist"T "$nlist"'
-	    }
-	  fi
-
-	  # Prepare the list of exported symbols
-	  if test -z "$export_symbols"; then
-	    export_symbols="$output_objdir/$outputname.exp"
-	    $opt_dry_run || {
-	      $RM $export_symbols
-	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-	      case $host in
-	      *cygwin* | *mingw* | *cegcc* )
-                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
-	        ;;
-	      esac
-	    }
-	  else
-	    $opt_dry_run || {
-	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-	      eval '$MV "$nlist"T "$nlist"'
-	      case $host in
-	        *cygwin | *mingw* | *cegcc* )
-	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
-	          ;;
-	      esac
-	    }
-	  fi
-	fi
-
-	for dlprefile in $dlprefiles; do
-	  func_verbose "extracting global C symbols from \`$dlprefile'"
-	  func_basename "$dlprefile"
-	  name="$func_basename_result"
-	  $opt_dry_run || {
-	    eval '$ECHO ": $name " >> "$nlist"'
-	    eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-	  }
-	done
-
-	$opt_dry_run || {
-	  # Make sure we have at least an empty file.
-	  test -f "$nlist" || : > "$nlist"
-
-	  if test -n "$exclude_expsyms"; then
-	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	    $MV "$nlist"T "$nlist"
-	  fi
-
-	  # Try sorting and uniquifying the output.
-	  if $GREP -v "^: " < "$nlist" |
-	      if sort -k 3 </dev/null >/dev/null 2>&1; then
-		sort -k 3
-	      else
-		sort +2
-	      fi |
-	      uniq > "$nlist"S; then
-	    :
-	  else
-	    $GREP -v "^: " < "$nlist" > "$nlist"S
-	  fi
-
-	  if test -f "$nlist"S; then
-	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
-	  else
-	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
-	  fi
-
-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
-
-/* The mapping between symbol names and symbols.  */
-typedef struct {
-  const char *name;
-  void *address;
-} lt_dlsymlist;
-"
-	  case $host in
-	  *cygwin* | *mingw* | *cegcc* )
-	    $ECHO >> "$output_objdir/$my_dlsyms" "\
-/* DATA imports from DLLs on WIN32 con't be const, because
-   runtime relocations are performed -- see ld's documentation
-   on pseudo-relocs.  */"
-	    lt_dlsym_const= ;;
-	  *osf5*)
-	    echo >> "$output_objdir/$my_dlsyms" "\
-/* This system does not cope well with relocations in const data */"
-	    lt_dlsym_const= ;;
-	  *)
-	    lt_dlsym_const=const ;;
-	  esac
-
-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
-extern $lt_dlsym_const lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
-$lt_dlsym_const lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
-  { \"$my_originator\", (void *) 0 },"
-
-	  case $need_lib_prefix in
-	  no)
-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
-	    ;;
-	  *)
-	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
-	    ;;
-	  esac
-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
-  {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_${my_prefix}_LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
-	} # !$opt_dry_run
-
-	pic_flag_for_symtable=
-	case "$compile_command " in
-	*" -static "*) ;;
-	*)
-	  case $host in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
-	  *-*-hpux*)
-	    pic_flag_for_symtable=" $pic_flag"  ;;
-	  *)
-	    if test "X$my_pic_p" != Xno; then
-	      pic_flag_for_symtable=" $pic_flag"
-	    fi
-	    ;;
-	  esac
-	  ;;
-	esac
-	symtab_cflags=
-	for arg in $LTCFLAGS; do
-	  case $arg in
-	  -pie | -fpie | -fPIE) ;;
-	  *) symtab_cflags="$symtab_cflags $arg" ;;
-	  esac
-	done
-
-	# Now compile the dynamic symbol file.
-	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
-
-	# Clean up the generated files.
-	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
-
-	# Transform the symbol file into the correct name.
-	symfileobj="$output_objdir/${my_outputname}S.$objext"
-	case $host in
-	*cygwin* | *mingw* | *cegcc* )
-	  if test -f "$output_objdir/$my_outputname.def"; then
-	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-	  else
-	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-	  fi
-	  ;;
-	*)
-	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-	  ;;
-	esac
-	;;
-      *)
-	func_fatal_error "unknown suffix for \`$my_dlsyms'"
-	;;
-      esac
-    else
-      # We keep going just in case the user didn't refer to
-      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-      # really was required.
-
-      # Nullify the symbol file.
-      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-    fi
-}
-
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
-{
-  $opt_debug
-  win32_libid_type="unknown"
-  win32_fileres=`file -L $1 2>/dev/null`
-  case $win32_fileres in
-  *ar\ archive\ import\ library*) # definitely import
-    win32_libid_type="x86 archive import"
-    ;;
-  *ar\ archive*) # could be an import, or static
-    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
-       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-      win32_nmres=`eval $NM -f posix -A $1 |
-	$SED -n -e '
-	    1,100{
-		/ I /{
-		    s,.*,import,
-		    p
-		    q
-		}
-	    }'`
-      case $win32_nmres in
-      import*)  win32_libid_type="x86 archive import";;
-      *)        win32_libid_type="x86 archive static";;
-      esac
-    fi
-    ;;
-  *DLL*)
-    win32_libid_type="x86 DLL"
-    ;;
-  *executable*) # but shell scripts are "executable" too...
-    case $win32_fileres in
-    *MS\ Windows\ PE\ Intel*)
-      win32_libid_type="x86 DLL"
-      ;;
-    esac
-    ;;
-  esac
-  $ECHO "$win32_libid_type"
-}
-
-
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
-    $opt_debug
-    f_ex_an_ar_dir="$1"; shift
-    f_ex_an_ar_oldlib="$1"
-    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
-    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
-     :
-    else
-      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
-    fi
-}
-
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
-    $opt_debug
-    my_gentop="$1"; shift
-    my_oldlibs=${1+"$@"}
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
-
-    for my_xlib in $my_oldlibs; do
-      # Extract the objects.
-      case $my_xlib in
-	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
-	*) my_xabs=`pwd`"/$my_xlib" ;;
-      esac
-      func_basename "$my_xlib"
-      my_xlib="$func_basename_result"
-      my_xlib_u=$my_xlib
-      while :; do
-        case " $extracted_archives " in
-	*" $my_xlib_u "*)
-	  func_arith $extracted_serial + 1
-	  extracted_serial=$func_arith_result
-	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
-	*) break ;;
-	esac
-      done
-      extracted_archives="$extracted_archives $my_xlib_u"
-      my_xdir="$my_gentop/$my_xlib_u"
-
-      func_mkdir_p "$my_xdir"
-
-      case $host in
-      *-darwin*)
-	func_verbose "Extracting $my_xabs"
-	# Do not bother doing anything if just a dry run
-	$opt_dry_run || {
-	  darwin_orig_dir=`pwd`
-	  cd $my_xdir || exit $?
-	  darwin_archive=$my_xabs
-	  darwin_curdir=`pwd`
-	  darwin_base_archive=`basename "$darwin_archive"`
-	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
-	  if test -n "$darwin_arches"; then
-	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
-	    darwin_arch=
-	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
-	    for darwin_arch in  $darwin_arches ; do
-	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
-	      cd "$darwin_curdir"
-	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
-	    done # $darwin_arches
-            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
-	    darwin_file=
-	    darwin_files=
-	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
-	      $LIPO -create -output "$darwin_file" $darwin_files
-	    done # $darwin_filelist
-	    $RM -rf unfat-$$
-	    cd "$darwin_orig_dir"
-	  else
-	    cd $darwin_orig_dir
-	    func_extract_an_archive "$my_xdir" "$my_xabs"
-	  fi # $darwin_arches
-	} # !$opt_dry_run
-	;;
-      *)
-        func_extract_an_archive "$my_xdir" "$my_xabs"
-	;;
-      esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-    done
-
-    func_extract_archives_result="$my_oldobjs"
-}
-
-
-
-# func_emit_wrapper_part1 [arg=no]
-#
-# Emit the first part of a libtool wrapper script on stdout.
-# For more information, see the description associated with
-# func_emit_wrapper(), below.
-func_emit_wrapper_part1 ()
-{
-	func_emit_wrapper_part1_arg1=no
-	if test -n "$1" ; then
-	  func_emit_wrapper_part1_arg1=$1
-	fi
-
-	$ECHO "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# Be Bourne compatible
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variables:
-  generated_by_libtool_version='$macro_version'
-  notinst_deplibs='$notinst_deplibs'
-else
-  # When we are sourced in execute mode, \$file and \$ECHO are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    ECHO=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$ECHO works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$ECHO will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
-"
-	$ECHO "\
-
-  # Find the directory that this script lives in.
-  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-
-    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-  done
-"
-}
-# end: func_emit_wrapper_part1
-
-# func_emit_wrapper_part2 [arg=no]
-#
-# Emit the second part of a libtool wrapper script on stdout.
-# For more information, see the description associated with
-# func_emit_wrapper(), below.
-func_emit_wrapper_part2 ()
-{
-	func_emit_wrapper_part2_arg1=no
-	if test -n "$1" ; then
-	  func_emit_wrapper_part2_arg1=$1
-	fi
-
-	$ECHO "\
-
-  # Usually 'no', except on cygwin/mingw when embedded into
-  # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
-  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
-    # special case for '.'
-    if test \"\$thisdir\" = \".\"; then
-      thisdir=\`pwd\`
-    fi
-    # remove .libs from thisdir
-    case \"\$thisdir\" in
-    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
-    $objdir )   thisdir=. ;;
-    esac
-  fi
-
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
-	if test "$fast_install" = yes; then
-	  $ECHO "\
-  program=lt-'$outputname'$exeext
-  progdir=\"\$thisdir/$objdir\"
-
-  if test ! -f \"\$progdir/\$program\" ||
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
-    file=\"\$\$-\$program\"
-
-    if test ! -d \"\$progdir\"; then
-      $MKDIR \"\$progdir\"
-    else
-      $RM \"\$progdir/\$file\"
-    fi"
-
-	  $ECHO "\
-
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-      else
-	$ECHO \"\$relink_command_output\" >&2
-	$RM \"\$progdir/\$file\"
-	exit 1
-      fi
-    fi
-
-    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $RM \"\$progdir/\$program\";
-      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $RM \"\$progdir/\$file\"
-  fi"
-	else
-	  $ECHO "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
-	fi
-
-	$ECHO "\
-
-  if test -f \"\$progdir/\$program\"; then"
-
-	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-	  $ECHO "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
-    export $shlibpath_var
-"
-	fi
-
-	# fixup the dll searchpath if we need to.
-	if test -n "$dllsearchpath"; then
-	  $ECHO "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-	fi
-
-	$ECHO "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-"
-	case $host in
-	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2* | *-cegcc*)
-	  $ECHO "\
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
-	  ;;
-
-	*)
-	  $ECHO "\
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
-	  ;;
-	esac
-	$ECHO "\
-      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
-      exit 1
-    fi
-  else
-    # The program doesn't exist.
-    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
-    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
-    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit 1
-  fi
-fi\
-"
-}
-# end: func_emit_wrapper_part2
-
-
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable.  Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
-#
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory.  This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
-{
-	func_emit_wrapper_arg1=no
-	if test -n "$1" ; then
-	  func_emit_wrapper_arg1=$1
-	fi
-
-	# split this up so that func_emit_cwrapperexe_src
-	# can call each part independently.
-	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
-	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
-}
-
-
-# func_to_host_path arg
-#
-# Convert paths to host format when used with build tools.
-# Intended for use with "native" mingw (where libtool itself
-# is running under the msys shell), or in the following cross-
-# build environments:
-#    $build          $host
-#    mingw (msys)    mingw  [e.g. native]
-#    cygwin          mingw
-#    *nix + wine     mingw
-# where wine is equipped with the `winepath' executable.
-# In the native mingw case, the (msys) shell automatically
-# converts paths for any non-msys applications it launches,
-# but that facility isn't available from inside the cwrapper.
-# Similar accommodations are necessary for $host mingw and
-# $build cygwin.  Calling this function does no harm for other
-# $host/$build combinations not listed above.
-#
-# ARG is the path (on $build) that should be converted to
-# the proper representation for $host. The result is stored
-# in $func_to_host_path_result.
-func_to_host_path ()
-{
-  func_to_host_path_result="$1"
-  if test -n "$1" ; then
-    case $host in
-      *mingw* )
-        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-        case $build in
-          *mingw* ) # actually, msys
-            # awkward: cmd appends spaces to result
-            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
-            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
-              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
-            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          *cygwin* )
-            func_to_host_path_tmp1=`cygpath -w "$1"`
-            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          * )
-            # Unfortunately, winepath does not exit with a non-zero
-            # error code, so we are forced to check the contents of
-            # stdout. On the other hand, if the command is not
-            # found, the shell will set an exit code of 127 and print
-            # *an error message* to stdout. So we must check for both
-            # error code of zero AND non-empty stdout, which explains
-            # the odd construction:
-            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
-            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
-              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-                $SED -e "$lt_sed_naive_backslashify"`
-            else
-              # Allow warning below.
-              func_to_host_path_result=""
-            fi
-            ;;
-        esac
-        if test -z "$func_to_host_path_result" ; then
-          func_error "Could not determine host path corresponding to"
-          func_error "  '$1'"
-          func_error "Continuing, but uninstalled executables may not work."
-          # Fallback:
-          func_to_host_path_result="$1"
-        fi
-        ;;
-    esac
-  fi
-}
-# end: func_to_host_path
-
-# func_to_host_pathlist arg
-#
-# Convert pathlists to host format when used with build tools.
-# See func_to_host_path(), above. This function supports the
-# following $build/$host combinations (but does no harm for
-# combinations not listed here):
-#    $build          $host
-#    mingw (msys)    mingw  [e.g. native]
-#    cygwin          mingw
-#    *nix + wine     mingw
-#
-# Path separators are also converted from $build format to
-# $host format. If ARG begins or ends with a path separator
-# character, it is preserved (but converted to $host format)
-# on output.
-#
-# ARG is a pathlist (on $build) that should be converted to
-# the proper representation on $host. The result is stored
-# in $func_to_host_pathlist_result.
-func_to_host_pathlist ()
-{
-  func_to_host_pathlist_result="$1"
-  if test -n "$1" ; then
-    case $host in
-      *mingw* )
-        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-        # Remove leading and trailing path separator characters from
-        # ARG. msys behavior is inconsistent here, cygpath turns them
-        # into '.;' and ';.', and winepath ignores them completely.
-        func_to_host_pathlist_tmp2="$1"
-        # Once set for this call, this variable should not be
-        # reassigned. It is used in tha fallback case.
-        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
-          $SED -e 's|^:*||' -e 's|:*$||'`
-        case $build in
-          *mingw* ) # Actually, msys.
-            # Awkward: cmd appends spaces to result.
-            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
-            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
-              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
-            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          *cygwin* )
-            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
-            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          * )
-            # unfortunately, winepath doesn't convert pathlists
-            func_to_host_pathlist_result=""
-            func_to_host_pathlist_oldIFS=$IFS
-            IFS=:
-            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
-              IFS=$func_to_host_pathlist_oldIFS
-              if test -n "$func_to_host_pathlist_f" ; then
-                func_to_host_path "$func_to_host_pathlist_f"
-                if test -n "$func_to_host_path_result" ; then
-                  if test -z "$func_to_host_pathlist_result" ; then
-                    func_to_host_pathlist_result="$func_to_host_path_result"
-                  else
-                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
-                  fi
-                fi
-              fi
-              IFS=:
-            done
-            IFS=$func_to_host_pathlist_oldIFS
-            ;;
-        esac
-        if test -z "$func_to_host_pathlist_result" ; then
-          func_error "Could not determine the host path(s) corresponding to"
-          func_error "  '$1'"
-          func_error "Continuing, but uninstalled executables may not work."
-          # Fallback. This may break if $1 contains DOS-style drive
-          # specifications. The fix is not to complicate the expression
-          # below, but for the user to provide a working wine installation
-          # with winepath so that path translation in the cross-to-mingw
-          # case works properly.
-          lt_replace_pathsep_nix_to_dos="s|:|;|g"
-          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
-            $SED -e "$lt_replace_pathsep_nix_to_dos"`
-        fi
-        # Now, add the leading and trailing path separators back
-        case "$1" in
-          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
-            ;;
-        esac
-        case "$1" in
-          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
-            ;;
-        esac
-        ;;
-    esac
-  fi
-}
-# end: func_to_host_pathlist
-
-# func_emit_cwrapperexe_src
-# emit the source code for a wrapper executable on stdout
-# Must ONLY be called from within func_mode_link because
-# it depends on a number of variable set therein.
-func_emit_cwrapperexe_src ()
-{
-	cat <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-
-   The $output program cannot be directly executed until all the libtool
-   libraries that it depends on are installed.
-
-   This wrapper executable should never be moved out of the build directory.
-   If it is, it will not operate correctly.
-
-   Currently, it simply execs the wrapper *script* "$SHELL $output",
-   but could eventually absorb all of the scripts functionality and
-   exec $objdir/$outputname directly.
-*/
-EOF
-	    cat <<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#ifdef _MSC_VER
-# include <direct.h>
-# include <process.h>
-# include <io.h>
-# define setmode _setmode
-#else
-# include <unistd.h>
-# include <stdint.h>
-# ifdef __CYGWIN__
-#  include <io.h>
-#  define HAVE_SETENV
-#  ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-#  endif
-# endif
-#endif
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef S_IXOTH
-# define S_IXOTH 0
-#endif
-#ifndef S_IXGRP
-# define S_IXGRP 0
-#endif
-
-#ifdef _MSC_VER
-# define S_IXUSR _S_IEXEC
-# define stat _stat
-# ifndef _INTPTR_T_DEFINED
-#  define intptr_t int
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-  defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# define FOPEN_WB "wb"
-# ifndef DIR_SEPARATOR_2
-#  define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-#  define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
-	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#ifdef __CYGWIN__
-# define FOPEN_WB "wb"
-#endif
-
-#ifndef FOPEN_WB
-# define FOPEN_WB "w"
-#endif
-#ifndef _O_BINARY
-# define _O_BINARY 0
-#endif
-
-#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
-  if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-#undef LTWRAPPER_DEBUGPRINTF
-#if defined DEBUGWRAPPER
-# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
-static void
-ltwrapper_debugprintf (const char *fmt, ...)
-{
-    va_list args;
-    va_start (args, fmt);
-    (void) vfprintf (stderr, fmt, args);
-    va_end (args);
-}
-#else
-# define LTWRAPPER_DEBUGPRINTF(args)
-#endif
-
-const char *program_name = NULL;
-
-void *xmalloc (size_t num);
-char *xstrdup (const char *string);
-const char *base_name (const char *name);
-char *find_executable (const char *wrapper);
-char *chase_symlinks (const char *pathspec);
-int make_executable (const char *path);
-int check_executable (const char *path);
-char *strendzap (char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-void lt_setenv (const char *name, const char *value);
-char *lt_extend_str (const char *orig_value, const char *add, int to_end);
-void lt_opt_process_env_set (const char *arg);
-void lt_opt_process_env_prepend (const char *arg);
-void lt_opt_process_env_append (const char *arg);
-int lt_split_name_value (const char *arg, char** name, char** value);
-void lt_update_exe_path (const char *name, const char *value);
-void lt_update_lib_path (const char *name, const char *value);
-
-static const char *script_text_part1 =
-EOF
-
-	    func_emit_wrapper_part1 yes |
-	        $SED -e 's/\([\\"]\)/\\\1/g' \
-	             -e 's/^/  "/' -e 's/$/\\n"/'
-	    echo ";"
-	    cat <<EOF
-
-static const char *script_text_part2 =
-EOF
-	    func_emit_wrapper_part2 yes |
-	        $SED -e 's/\([\\"]\)/\\\1/g' \
-	             -e 's/^/  "/' -e 's/$/\\n"/'
-	    echo ";"
-
-	    cat <<EOF
-const char * MAGIC_EXE = "$magic_exe";
-const char * LIB_PATH_VARNAME = "$shlibpath_var";
-EOF
-
-	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-              func_to_host_pathlist "$temp_rpath"
-	      cat <<EOF
-const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
-EOF
-	    else
-	      cat <<"EOF"
-const char * LIB_PATH_VALUE   = "";
-EOF
-	    fi
-
-	    if test -n "$dllsearchpath"; then
-              func_to_host_pathlist "$dllsearchpath:"
-	      cat <<EOF
-const char * EXE_PATH_VARNAME = "PATH";
-const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
-EOF
-	    else
-	      cat <<"EOF"
-const char * EXE_PATH_VARNAME = "";
-const char * EXE_PATH_VALUE   = "";
-EOF
-	    fi
-
-	    if test "$fast_install" = yes; then
-	      cat <<EOF
-const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
-EOF
-	    else
-	      cat <<EOF
-const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
-EOF
-	    fi
-
-
-	    cat <<"EOF"
-
-#define LTWRAPPER_OPTION_PREFIX         "--lt-"
-#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
-
-static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
-static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
-
-static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
-
-static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
-static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
-  /* argument is putenv-style "foo=bar", value of foo is set to bar */
-
-static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
-static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
-  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
-
-static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
-static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
-  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
-
-int
-main (int argc, char *argv[])
-{
-  char **newargz;
-  int  newargc;
-  char *tmp_pathspec;
-  char *actual_cwrapper_path;
-  char *actual_cwrapper_name;
-  char *target_name;
-  char *lt_argv_zero;
-  intptr_t rval = 127;
-
-  int i;
-
-  program_name = (char *) xstrdup (base_name (argv[0]));
-  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
-  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
-
-  /* very simple arg parsing; don't want to rely on getopt */
-  for (i = 1; i < argc; i++)
-    {
-      if (strcmp (argv[i], dumpscript_opt) == 0)
-	{
-EOF
-	    case "$host" in
-	      *mingw* | *cygwin* )
-		# make stdout use "unix" line endings
-		echo "          setmode(1,_O_BINARY);"
-		;;
-	      esac
-
-	    cat <<"EOF"
-	  printf ("%s", script_text_part1);
-	  printf ("%s", script_text_part2);
-	  return 0;
-	}
-    }
-
-  newargz = XMALLOC (char *, argc + 1);
-  tmp_pathspec = find_executable (argv[0]);
-  if (tmp_pathspec == NULL)
-    lt_fatal ("Couldn't find %s", argv[0]);
-  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
-			  tmp_pathspec));
-
-  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
-  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
-			  actual_cwrapper_path));
-  XFREE (tmp_pathspec);
-
-  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
-  strendzap (actual_cwrapper_path, actual_cwrapper_name);
-
-  /* wrapper name transforms */
-  strendzap (actual_cwrapper_name, ".exe");
-  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
-  XFREE (actual_cwrapper_name);
-  actual_cwrapper_name = tmp_pathspec;
-  tmp_pathspec = 0;
-
-  /* target_name transforms -- use actual target program name; might have lt- prefix */
-  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
-  strendzap (target_name, ".exe");
-  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
-  XFREE (target_name);
-  target_name = tmp_pathspec;
-  tmp_pathspec = 0;
-
-  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
-			  target_name));
-EOF
-
-	    cat <<EOF
-  newargz[0] =
-    XMALLOC (char, (strlen (actual_cwrapper_path) +
-		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
-  strcpy (newargz[0], actual_cwrapper_path);
-  strcat (newargz[0], "$objdir");
-  strcat (newargz[0], "/");
-EOF
-
-	    cat <<"EOF"
-  /* stop here, and copy so we don't have to do this twice */
-  tmp_pathspec = xstrdup (newargz[0]);
-
-  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
-  strcat (newargz[0], actual_cwrapper_name);
-
-  /* DO want the lt- prefix here if it exists, so use target_name */
-  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
-  XFREE (tmp_pathspec);
-  tmp_pathspec = NULL;
-EOF
-
-	    case $host_os in
-	      mingw*)
-	    cat <<"EOF"
-  {
-    char* p;
-    while ((p = strchr (newargz[0], '\\')) != NULL)
-      {
-	*p = '/';
-      }
-    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
-      {
-	*p = '/';
-      }
-  }
-EOF
-	    ;;
-	    esac
-
-	    cat <<"EOF"
-  XFREE (target_name);
-  XFREE (actual_cwrapper_path);
-  XFREE (actual_cwrapper_name);
-
-  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
-  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
-  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
-  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
-
-  newargc=0;
-  for (i = 1; i < argc; i++)
-    {
-      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
-        {
-          if (argv[i][env_set_opt_len] == '=')
-            {
-              const char *p = argv[i] + env_set_opt_len + 1;
-              lt_opt_process_env_set (p);
-            }
-          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
-            {
-              lt_opt_process_env_set (argv[++i]); /* don't copy */
-            }
-          else
-            lt_fatal ("%s missing required argument", env_set_opt);
-          continue;
-        }
-      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
-        {
-          if (argv[i][env_prepend_opt_len] == '=')
-            {
-              const char *p = argv[i] + env_prepend_opt_len + 1;
-              lt_opt_process_env_prepend (p);
-            }
-          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
-            {
-              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
-            }
-          else
-            lt_fatal ("%s missing required argument", env_prepend_opt);
-          continue;
-        }
-      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
-        {
-          if (argv[i][env_append_opt_len] == '=')
-            {
-              const char *p = argv[i] + env_append_opt_len + 1;
-              lt_opt_process_env_append (p);
-            }
-          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
-            {
-              lt_opt_process_env_append (argv[++i]); /* don't copy */
-            }
-          else
-            lt_fatal ("%s missing required argument", env_append_opt);
-          continue;
-        }
-      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
-        {
-          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
-             namespace, but it is not one of the ones we know about and
-             have already dealt with, above (inluding dump-script), then
-             report an error. Otherwise, targets might begin to believe
-             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
-             namespace. The first time any user complains about this, we'll
-             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
-             or a configure.ac-settable value.
-           */
-          lt_fatal ("Unrecognized option in %s namespace: '%s'",
-                    ltwrapper_option_prefix, argv[i]);
-        }
-      /* otherwise ... */
-      newargz[++newargc] = xstrdup (argv[i]);
-    }
-  newargz[++newargc] = NULL;
-
-  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
-  for (i = 0; i < newargc; i++)
-    {
-      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
-    }
-
-EOF
-
-	    case $host_os in
-	      mingw*)
-		cat <<"EOF"
-  /* execv doesn't actually work on mingw as expected on unix */
-  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
-  if (rval == -1)
-    {
-      /* failed to start process */
-      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
-      return 127;
-    }
-  return rval;
-EOF
-		;;
-	      *)
-		cat <<"EOF"
-  execv (lt_argv_zero, newargz);
-  return rval; /* =127, but avoids unused variable warning */
-EOF
-		;;
-	    esac
-
-	    cat <<"EOF"
-}
-
-void *
-xmalloc (size_t num)
-{
-  void *p = (void *) malloc (num);
-  if (!p)
-    lt_fatal ("Memory exhausted");
-
-  return p;
-}
-
-char *
-xstrdup (const char *string)
-{
-  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
-			  string) : NULL;
-}
-
-const char *
-base_name (const char *name)
-{
-  const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
-    name += 2;
-#endif
-
-  for (base = name; *name; name++)
-    if (IS_DIR_SEPARATOR (*name))
-      base = name + 1;
-  return base;
-}
-
-int
-check_executable (const char *path)
-{
-  struct stat st;
-
-  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
-			  path ? (*path ? path : "EMPTY!") : "NULL!"));
-  if ((!path) || (!*path))
-    return 0;
-
-  if ((stat (path, &st) >= 0)
-      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
-    return 1;
-  else
-    return 0;
-}
-
-int
-make_executable (const char *path)
-{
-  int rval = 0;
-  struct stat st;
-
-  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
-			  path ? (*path ? path : "EMPTY!") : "NULL!"));
-  if ((!path) || (!*path))
-    return 0;
-
-  if (stat (path, &st) >= 0)
-    {
-      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
-    }
-  return rval;
-}
-
-/* Searches for the full path of the wrapper.  Returns
-   newly allocated full path name if found, NULL otherwise
-   Does not chase symlinks, even on platforms that support them.
-*/
-char *
-find_executable (const char *wrapper)
-{
-  int has_slash = 0;
-  const char *p;
-  const char *p_next;
-  /* static buffer for getcwd */
-  char tmp[LT_PATHMAX + 1];
-  int tmp_len;
-  char *concat_name;
-
-  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
-			  wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
-
-  if ((wrapper == NULL) || (*wrapper == '\0'))
-    return NULL;
-
-  /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
-    {
-      concat_name = xstrdup (wrapper);
-      if (check_executable (concat_name))
-	return concat_name;
-      XFREE (concat_name);
-    }
-  else
-    {
-#endif
-      if (IS_DIR_SEPARATOR (wrapper[0]))
-	{
-	  concat_name = xstrdup (wrapper);
-	  if (check_executable (concat_name))
-	    return concat_name;
-	  XFREE (concat_name);
-	}
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-    }
-#endif
-
-  for (p = wrapper; *p; p++)
-    if (*p == '/')
-      {
-	has_slash = 1;
-	break;
-      }
-  if (!has_slash)
-    {
-      /* no slashes; search PATH */
-      const char *path = getenv ("PATH");
-      if (path != NULL)
-	{
-	  for (p = path; *p; p = p_next)
-	    {
-	      const char *q;
-	      size_t p_len;
-	      for (q = p; *q; q++)
-		if (IS_PATH_SEPARATOR (*q))
-		  break;
-	      p_len = q - p;
-	      p_next = (*q == '\0' ? q : q + 1);
-	      if (p_len == 0)
-		{
-		  /* empty path: current directory */
-		  if (getcwd (tmp, LT_PATHMAX) == NULL)
-		    lt_fatal ("getcwd failed");
-		  tmp_len = strlen (tmp);
-		  concat_name =
-		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
-		  memcpy (concat_name, tmp, tmp_len);
-		  concat_name[tmp_len] = '/';
-		  strcpy (concat_name + tmp_len + 1, wrapper);
-		}
-	      else
-		{
-		  concat_name =
-		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
-		  memcpy (concat_name, p, p_len);
-		  concat_name[p_len] = '/';
-		  strcpy (concat_name + p_len + 1, wrapper);
-		}
-	      if (check_executable (concat_name))
-		return concat_name;
-	      XFREE (concat_name);
-	    }
-	}
-      /* not found in PATH; assume curdir */
-    }
-  /* Relative path | not found in path: prepend cwd */
-  if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal ("getcwd failed");
-  tmp_len = strlen (tmp);
-  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
-  memcpy (concat_name, tmp, tmp_len);
-  concat_name[tmp_len] = '/';
-  strcpy (concat_name + tmp_len + 1, wrapper);
-
-  if (check_executable (concat_name))
-    return concat_name;
-  XFREE (concat_name);
-  return NULL;
-}
-
-char *
-chase_symlinks (const char *pathspec)
-{
-#ifndef S_ISLNK
-  return xstrdup (pathspec);
-#else
-  char buf[LT_PATHMAX];
-  struct stat s;
-  char *tmp_pathspec = xstrdup (pathspec);
-  char *p;
-  int has_symlinks = 0;
-  while (strlen (tmp_pathspec) && !has_symlinks)
-    {
-      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
-			      tmp_pathspec));
-      if (lstat (tmp_pathspec, &s) == 0)
-	{
-	  if (S_ISLNK (s.st_mode) != 0)
-	    {
-	      has_symlinks = 1;
-	      break;
-	    }
-
-	  /* search backwards for last DIR_SEPARATOR */
-	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
-	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
-	    p--;
-	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
-	    {
-	      /* no more DIR_SEPARATORS left */
-	      break;
-	    }
-	  *p = '\0';
-	}
-      else
-	{
-	  char *errstr = strerror (errno);
-	  lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
-	}
-    }
-  XFREE (tmp_pathspec);
-
-  if (!has_symlinks)
-    {
-      return xstrdup (pathspec);
-    }
-
-  tmp_pathspec = realpath (pathspec, buf);
-  if (tmp_pathspec == 0)
-    {
-      lt_fatal ("Could not follow symlinks for %s", pathspec);
-    }
-  return xstrdup (tmp_pathspec);
-#endif
-}
-
-char *
-strendzap (char *str, const char *pat)
-{
-  size_t len, patlen;
-
-  assert (str != NULL);
-  assert (pat != NULL);
-
-  len = strlen (str);
-  patlen = strlen (pat);
-
-  if (patlen <= len)
-    {
-      str += len - patlen;
-      if (strcmp (str, pat) == 0)
-	*str = '\0';
-    }
-  return str;
-}
-
-static void
-lt_error_core (int exit_status, const char *mode,
-	       const char *message, va_list ap)
-{
-  fprintf (stderr, "%s: %s: ", program_name, mode);
-  vfprintf (stderr, message, ap);
-  fprintf (stderr, ".\n");
-
-  if (exit_status >= 0)
-    exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
-  va_list ap;
-  va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
-  va_end (ap);
-}
-
-void
-lt_setenv (const char *name, const char *value)
-{
-  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
-                          (name ? name : "<NULL>"),
-                          (value ? value : "<NULL>")));
-  {
-#ifdef HAVE_SETENV
-    /* always make a copy, for consistency with !HAVE_SETENV */
-    char *str = xstrdup (value);
-    setenv (name, str, 1);
-#else
-    int len = strlen (name) + 1 + strlen (value) + 1;
-    char *str = XMALLOC (char, len);
-    sprintf (str, "%s=%s", name, value);
-    if (putenv (str) != EXIT_SUCCESS)
-      {
-        XFREE (str);
-      }
-#endif
-  }
-}
-
-char *
-lt_extend_str (const char *orig_value, const char *add, int to_end)
-{
-  char *new_value;
-  if (orig_value && *orig_value)
-    {
-      int orig_value_len = strlen (orig_value);
-      int add_len = strlen (add);
-      new_value = XMALLOC (char, add_len + orig_value_len + 1);
-      if (to_end)
-        {
-          strcpy (new_value, orig_value);
-          strcpy (new_value + orig_value_len, add);
-        }
-      else
-        {
-          strcpy (new_value, add);
-          strcpy (new_value + add_len, orig_value);
-        }
-    }
-  else
-    {
-      new_value = xstrdup (add);
-    }
-  return new_value;
-}
-
-int
-lt_split_name_value (const char *arg, char** name, char** value)
-{
-  const char *p;
-  int len;
-  if (!arg || !*arg)
-    return 1;
-
-  p = strchr (arg, (int)'=');
-
-  if (!p)
-    return 1;
-
-  *value = xstrdup (++p);
-
-  len = strlen (arg) - strlen (*value);
-  *name = XMALLOC (char, len);
-  strncpy (*name, arg, len-1);
-  (*name)[len - 1] = '\0';
-
-  return 0;
-}
-
-void
-lt_opt_process_env_set (const char *arg)
-{
-  char *name = NULL;
-  char *value = NULL;
-
-  if (lt_split_name_value (arg, &name, &value) != 0)
-    {
-      XFREE (name);
-      XFREE (value);
-      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
-    }
-
-  lt_setenv (name, value);
-  XFREE (name);
-  XFREE (value);
-}
-
-void
-lt_opt_process_env_prepend (const char *arg)
-{
-  char *name = NULL;
-  char *value = NULL;
-  char *new_value = NULL;
-
-  if (lt_split_name_value (arg, &name, &value) != 0)
-    {
-      XFREE (name);
-      XFREE (value);
-      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
-    }
-
-  new_value = lt_extend_str (getenv (name), value, 0);
-  lt_setenv (name, new_value);
-  XFREE (new_value);
-  XFREE (name);
-  XFREE (value);
-}
-
-void
-lt_opt_process_env_append (const char *arg)
-{
-  char *name = NULL;
-  char *value = NULL;
-  char *new_value = NULL;
-
-  if (lt_split_name_value (arg, &name, &value) != 0)
-    {
-      XFREE (name);
-      XFREE (value);
-      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
-    }
-
-  new_value = lt_extend_str (getenv (name), value, 1);
-  lt_setenv (name, new_value);
-  XFREE (new_value);
-  XFREE (name);
-  XFREE (value);
-}
-
-void
-lt_update_exe_path (const char *name, const char *value)
-{
-  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
-                          (name ? name : "<NULL>"),
-                          (value ? value : "<NULL>")));
-
-  if (name && *name && value && *value)
-    {
-      char *new_value = lt_extend_str (getenv (name), value, 0);
-      /* some systems can't cope with a ':'-terminated path #' */
-      int len = strlen (new_value);
-      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
-        {
-          new_value[len-1] = '\0';
-        }
-      lt_setenv (name, new_value);
-      XFREE (new_value);
-    }
-}
-
-void
-lt_update_lib_path (const char *name, const char *value)
-{
-  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
-                          (name ? name : "<NULL>"),
-                          (value ? value : "<NULL>")));
-
-  if (name && *name && value && *value)
-    {
-      char *new_value = lt_extend_str (getenv (name), value, 0);
-      lt_setenv (name, new_value);
-      XFREE (new_value);
-    }
-}
-
-
-EOF
-}
-# end: func_emit_cwrapperexe_src
-
-# func_mode_link arg...
-func_mode_link ()
-{
-    $opt_debug
-    case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-      # It is impossible to link a dll without this setting, and
-      # we shouldn't force the makefile maintainer to figure out
-      # which system we are compiling for in order to pass an extra
-      # flag for every libtool invocation.
-      # allow_undefined=no
-
-      # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll which has undefined symbols, in which case not
-      # even a static library is built.  For now, we need to specify
-      # -no-undefined on the libtool link line when we can be certain
-      # that all symbols are satisfied, otherwise we get a static library.
-      allow_undefined=yes
-      ;;
-    *)
-      allow_undefined=yes
-      ;;
-    esac
-    libtool_args=$nonopt
-    base_compile="$nonopt $@"
-    compile_command=$nonopt
-    finalize_command=$nonopt
-
-    compile_rpath=
-    finalize_rpath=
-    compile_shlibpath=
-    finalize_shlibpath=
-    convenience=
-    old_convenience=
-    deplibs=
-    old_deplibs=
-    compiler_flags=
-    linker_flags=
-    dllsearchpath=
-    lib_search_path=`pwd`
-    inst_prefix_dir=
-    new_inherited_linker_flags=
-
-    avoid_version=no
-    dlfiles=
-    dlprefiles=
-    dlself=no
-    export_dynamic=no
-    export_symbols=
-    export_symbols_regex=
-    generated=
-    libobjs=
-    ltlibs=
-    module=no
-    no_install=no
-    objs=
-    non_pic_objects=
-    precious_files_regex=
-    prefer_static_libs=no
-    preload=no
-    prev=
-    prevarg=
-    release=
-    rpath=
-    xrpath=
-    perm_rpath=
-    temp_rpath=
-    thread_safe=no
-    vinfo=
-    vinfo_number=no
-    weak_libs=
-    single_module="${wl}-single_module"
-    func_infer_tag $base_compile
-
-    # We need to know -static, to get the right output filenames.
-    for arg
-    do
-      case $arg in
-      -shared)
-	test "$build_libtool_libs" != yes && \
-	  func_fatal_configuration "can not build a shared library"
-	build_old_libs=no
-	break
-	;;
-      -all-static | -static | -static-libtool-libs)
-	case $arg in
-	-all-static)
-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    func_warning "complete static linking is impossible in this configuration"
-	  fi
-	  if test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=yes
-	  ;;
-	-static)
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=built
-	  ;;
-	-static-libtool-libs)
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=yes
-	  ;;
-	esac
-	build_libtool_libs=no
-	build_old_libs=yes
-	break
-	;;
-      esac
-    done
-
-    # See if our shared archives depend on static archives.
-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
-    # Go through the arguments, transforming them on the way.
-    while test "$#" -gt 0; do
-      arg="$1"
-      shift
-      func_quote_for_eval "$arg"
-      qarg=$func_quote_for_eval_unquoted_result
-      func_append libtool_args " $func_quote_for_eval_result"
-
-      # If the previous option needs an argument, assign it.
-      if test -n "$prev"; then
-	case $prev in
-	output)
-	  func_append compile_command " @OUTPUT@"
-	  func_append finalize_command " @OUTPUT@"
-	  ;;
-	esac
-
-	case $prev in
-	dlfiles|dlprefiles)
-	  if test "$preload" = no; then
-	    # Add the symbol object into the linking commands.
-	    func_append compile_command " @SYMFILE@"
-	    func_append finalize_command " @SYMFILE@"
-	    preload=yes
-	  fi
-	  case $arg in
-	  *.la | *.lo) ;;  # We handle these cases below.
-	  force)
-	    if test "$dlself" = no; then
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  self)
-	    if test "$prev" = dlprefiles; then
-	      dlself=yes
-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
-	      dlself=yes
-	    else
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  *)
-	    if test "$prev" = dlfiles; then
-	      dlfiles="$dlfiles $arg"
-	    else
-	      dlprefiles="$dlprefiles $arg"
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  esac
-	  ;;
-	expsyms)
-	  export_symbols="$arg"
-	  test -f "$arg" \
-	    || func_fatal_error "symbol file \`$arg' does not exist"
-	  prev=
-	  continue
-	  ;;
-	expsyms_regex)
-	  export_symbols_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	framework)
-	  case $host in
-	    *-*-darwin*)
-	      case "$deplibs " in
-		*" $qarg.ltframework "*) ;;
-		*) deplibs="$deplibs $qarg.ltframework" # this is fixed later
-		   ;;
-	      esac
-	      ;;
-	  esac
-	  prev=
-	  continue
-	  ;;
-	inst_prefix)
-	  inst_prefix_dir="$arg"
-	  prev=
-	  continue
-	  ;;
-	objectlist)
-	  if test -f "$arg"; then
-	    save_arg=$arg
-	    moreargs=
-	    for fil in `cat "$save_arg"`
-	    do
-#	      moreargs="$moreargs $fil"
-	      arg=$fil
-	      # A libtool-controlled object.
-
-	      # Check to see that this really is a libtool object.
-	      if func_lalib_unsafe_p "$arg"; then
-		pic_object=
-		non_pic_object=
-
-		# Read the .lo file
-		func_source "$arg"
-
-		if test -z "$pic_object" ||
-		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none &&
-		   test "$non_pic_object" = none; then
-		  func_fatal_error "cannot find name of object for \`$arg'"
-		fi
-
-		# Extract subdirectory from the argument.
-		func_dirname "$arg" "/" ""
-		xdir="$func_dirname_result"
-
-		if test "$pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  pic_object="$xdir$pic_object"
-
-		  if test "$prev" = dlfiles; then
-		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		      dlfiles="$dlfiles $pic_object"
-		      prev=
-		      continue
-		    else
-		      # If libtool objects are unsupported, then we need to preload.
-		      prev=dlprefiles
-		    fi
-		  fi
-
-		  # CHECK ME:  I think I busted this.  -Ossama
-		  if test "$prev" = dlprefiles; then
-		    # Preload the old-style object.
-		    dlprefiles="$dlprefiles $pic_object"
-		    prev=
-		  fi
-
-		  # A PIC object.
-		  func_append libobjs " $pic_object"
-		  arg="$pic_object"
-		fi
-
-		# Non-PIC object.
-		if test "$non_pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  non_pic_object="$xdir$non_pic_object"
-
-		  # A standard non-PIC object
-		  func_append non_pic_objects " $non_pic_object"
-		  if test -z "$pic_object" || test "$pic_object" = none ; then
-		    arg="$non_pic_object"
-		  fi
-		else
-		  # If the PIC object exists, use it instead.
-		  # $xdir was prepended to $pic_object above.
-		  non_pic_object="$pic_object"
-		  func_append non_pic_objects " $non_pic_object"
-		fi
-	      else
-		# Only an error if not doing a dry-run.
-		if $opt_dry_run; then
-		  # Extract subdirectory from the argument.
-		  func_dirname "$arg" "/" ""
-		  xdir="$func_dirname_result"
-
-		  func_lo2o "$arg"
-		  pic_object=$xdir$objdir/$func_lo2o_result
-		  non_pic_object=$xdir$func_lo2o_result
-		  func_append libobjs " $pic_object"
-		  func_append non_pic_objects " $non_pic_object"
-	        else
-		  func_fatal_error "\`$arg' is not a valid libtool object"
-		fi
-	      fi
-	    done
-	  else
-	    func_fatal_error "link input file \`$arg' does not exist"
-	  fi
-	  arg=$save_arg
-	  prev=
-	  continue
-	  ;;
-	precious_regex)
-	  precious_files_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	release)
-	  release="-$arg"
-	  prev=
-	  continue
-	  ;;
-	rpath | xrpath)
-	  # We need an absolute path.
-	  case $arg in
-	  [\\/]* | [A-Za-z]:[\\/]*) ;;
-	  *)
-	    func_fatal_error "only absolute run-paths are allowed"
-	    ;;
-	  esac
-	  if test "$prev" = rpath; then
-	    case "$rpath " in
-	    *" $arg "*) ;;
-	    *) rpath="$rpath $arg" ;;
-	    esac
-	  else
-	    case "$xrpath " in
-	    *" $arg "*) ;;
-	    *) xrpath="$xrpath $arg" ;;
-	    esac
-	  fi
-	  prev=
-	  continue
-	  ;;
-	shrext)
-	  shrext_cmds="$arg"
-	  prev=
-	  continue
-	  ;;
-	weak)
-	  weak_libs="$weak_libs $arg"
-	  prev=
-	  continue
-	  ;;
-	xcclinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $qarg"
-	  prev=
-	  func_append compile_command " $qarg"
-	  func_append finalize_command " $qarg"
-	  continue
-	  ;;
-	xcompiler)
-	  compiler_flags="$compiler_flags $qarg"
-	  prev=
-	  func_append compile_command " $qarg"
-	  func_append finalize_command " $qarg"
-	  continue
-	  ;;
-	xlinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $wl$qarg"
-	  prev=
-	  func_append compile_command " $wl$qarg"
-	  func_append finalize_command " $wl$qarg"
-	  continue
-	  ;;
-	*)
-	  eval "$prev=\"\$arg\""
-	  prev=
-	  continue
-	  ;;
-	esac
-      fi # test -n "$prev"
-
-      prevarg="$arg"
-
-      case $arg in
-      -all-static)
-	if test -n "$link_static_flag"; then
-	  # See comment for -static flag below, for more details.
-	  func_append compile_command " $link_static_flag"
-	  func_append finalize_command " $link_static_flag"
-	fi
-	continue
-	;;
-
-      -allow-undefined)
-	# FIXME: remove this flag sometime in the future.
-	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
-	;;
-
-      -avoid-version)
-	avoid_version=yes
-	continue
-	;;
-
-      -dlopen)
-	prev=dlfiles
-	continue
-	;;
-
-      -dlpreopen)
-	prev=dlprefiles
-	continue
-	;;
-
-      -export-dynamic)
-	export_dynamic=yes
-	continue
-	;;
-
-      -export-symbols | -export-symbols-regex)
-	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  func_fatal_error "more than one -exported-symbols argument is not allowed"
-	fi
-	if test "X$arg" = "X-export-symbols"; then
-	  prev=expsyms
-	else
-	  prev=expsyms_regex
-	fi
-	continue
-	;;
-
-      -framework)
-	prev=framework
-	continue
-	;;
-
-      -inst-prefix-dir)
-	prev=inst_prefix
-	continue
-	;;
-
-      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
-      # so, if we see these flags be careful not to treat them like -L
-      -L[A-Z][A-Z]*:*)
-	case $with_gcc/$host in
-	no/*-*-irix* | /*-*-irix*)
-	  func_append compile_command " $arg"
-	  func_append finalize_command " $arg"
-	  ;;
-	esac
-	continue
-	;;
-
-      -L*)
-	func_stripname '-L' '' "$arg"
-	dir=$func_stripname_result
-	if test -z "$dir"; then
-	  if test "$#" -gt 0; then
-	    func_fatal_error "require no space between \`-L' and \`$1'"
-	  else
-	    func_fatal_error "need path for \`-L' option"
-	  fi
-	fi
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  absdir=`cd "$dir" && pwd`
-	  test -z "$absdir" && \
-	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
-	  dir="$absdir"
-	  ;;
-	esac
-	case "$deplibs " in
-	*" -L$dir "*) ;;
-	*)
-	  deplibs="$deplibs -L$dir"
-	  lib_search_path="$lib_search_path $dir"
-	  ;;
-	esac
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
-	  case :$dllsearchpath: in
-	  *":$dir:"*) ;;
-	  ::) dllsearchpath=$dir;;
-	  *) dllsearchpath="$dllsearchpath:$dir";;
-	  esac
-	  case :$dllsearchpath: in
-	  *":$testbindir:"*) ;;
-	  ::) dllsearchpath=$testbindir;;
-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
-	  esac
-	  ;;
-	esac
-	continue
-	;;
-
-      -l*)
-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
-	    # These systems don't actually have a C or math library (as such)
-	    continue
-	    ;;
-	  *-*-os2*)
-	    # These systems don't actually have a C library (as such)
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C and math libraries are in the System framework
-	    deplibs="$deplibs System.ltframework"
-	    continue
-	    ;;
-	  *-*-sco3.2v5* | *-*-sco5v6*)
-	    # Causes problems with __ctype
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-	    # Compiler inserts libc in the correct place for threads to work
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  esac
-	elif test "X$arg" = "X-lc_r"; then
-	 case $host in
-	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	   # Do not include libc_r directly, use -pthread flag.
-	   continue
-	   ;;
-	 esac
-	fi
-	deplibs="$deplibs $arg"
-	continue
-	;;
-
-      -module)
-	module=yes
-	continue
-	;;
-
-      # Tru64 UNIX uses -model [arg] to determine the layout of C++
-      # classes, name mangling, and exception handling.
-      # Darwin uses the -arch flag to determine output architecture.
-      -model|-arch|-isysroot)
-	compiler_flags="$compiler_flags $arg"
-	func_append compile_command " $arg"
-	func_append finalize_command " $arg"
-	prev=xcompiler
-	continue
-	;;
-
-      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
-	compiler_flags="$compiler_flags $arg"
-	func_append compile_command " $arg"
-	func_append finalize_command " $arg"
-	case "$new_inherited_linker_flags " in
-	    *" $arg "*) ;;
-	    * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
-	esac
-	continue
-	;;
-
-      -multi_module)
-	single_module="${wl}-multi_module"
-	continue
-	;;
-
-      -no-fast-install)
-	fast_install=no
-	continue
-	;;
-
-      -no-install)
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
-	  # The PATH hackery in wrapper scripts is required on Windows
-	  # and Darwin in order for the loader to find any dlls it needs.
-	  func_warning "\`-no-install' is ignored for $host"
-	  func_warning "assuming \`-no-fast-install' instead"
-	  fast_install=no
-	  ;;
-	*) no_install=yes ;;
-	esac
-	continue
-	;;
-
-      -no-undefined)
-	allow_undefined=no
-	continue
-	;;
-
-      -objectlist)
-	prev=objectlist
-	continue
-	;;
-
-      -o) prev=output ;;
-
-      -precious-files-regex)
-	prev=precious_regex
-	continue
-	;;
-
-      -release)
-	prev=release
-	continue
-	;;
-
-      -rpath)
-	prev=rpath
-	continue
-	;;
-
-      -R)
-	prev=xrpath
-	continue
-	;;
-
-      -R*)
-	func_stripname '-R' '' "$arg"
-	dir=$func_stripname_result
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  func_fatal_error "only absolute run-paths are allowed"
-	  ;;
-	esac
-	case "$xrpath " in
-	*" $dir "*) ;;
-	*) xrpath="$xrpath $dir" ;;
-	esac
-	continue
-	;;
-
-      -shared)
-	# The effects of -shared are defined in a previous loop.
-	continue
-	;;
-
-      -shrext)
-	prev=shrext
-	continue
-	;;
-
-      -static | -static-libtool-libs)
-	# The effects of -static are defined in a previous loop.
-	# We used to do the same as -all-static on platforms that
-	# didn't have a PIC flag, but the assumption that the effects
-	# would be equivalent was wrong.  It would break on at least
-	# Digital Unix and AIX.
-	continue
-	;;
-
-      -thread-safe)
-	thread_safe=yes
-	continue
-	;;
-
-      -version-info)
-	prev=vinfo
-	continue
-	;;
-
-      -version-number)
-	prev=vinfo
-	vinfo_number=yes
-	continue
-	;;
-
-      -weak)
-        prev=weak
-	continue
-	;;
-
-      -Wc,*)
-	func_stripname '-Wc,' '' "$arg"
-	args=$func_stripname_result
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-          func_quote_for_eval "$flag"
-	  arg="$arg $wl$func_quote_for_eval_result"
-	  compiler_flags="$compiler_flags $func_quote_for_eval_result"
-	done
-	IFS="$save_ifs"
-	func_stripname ' ' '' "$arg"
-	arg=$func_stripname_result
-	;;
-
-      -Wl,*)
-	func_stripname '-Wl,' '' "$arg"
-	args=$func_stripname_result
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-          func_quote_for_eval "$flag"
-	  arg="$arg $wl$func_quote_for_eval_result"
-	  compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
-	  linker_flags="$linker_flags $func_quote_for_eval_result"
-	done
-	IFS="$save_ifs"
-	func_stripname ' ' '' "$arg"
-	arg=$func_stripname_result
-	;;
-
-      -Xcompiler)
-	prev=xcompiler
-	continue
-	;;
-
-      -Xlinker)
-	prev=xlinker
-	continue
-	;;
-
-      -XCClinker)
-	prev=xcclinker
-	continue
-	;;
-
-      # -msg_* for osf cc
-      -msg_*)
-	func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
-	;;
-
-      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-      # -r[0-9][0-9]* specifies the processor on the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-      # +DA*, +DD* enable 64-bit mode on the HP compiler
-      # -q* pass through compiler args for the IBM compiler
-      # -m*, -t[45]*, -txscale* pass through architecture-specific
-      # compiler args for GCC
-      # -F/path gives path to uninstalled frameworks, gcc on darwin
-      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
-      # @file GCC response files
-      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
-        func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
-        func_append compile_command " $arg"
-        func_append finalize_command " $arg"
-        compiler_flags="$compiler_flags $arg"
-        continue
-        ;;
-
-      # Some other compiler flag.
-      -* | +*)
-        func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
-	;;
-
-      *.$objext)
-	# A standard object.
-	objs="$objs $arg"
-	;;
-
-      *.lo)
-	# A libtool-controlled object.
-
-	# Check to see that this really is a libtool object.
-	if func_lalib_unsafe_p "$arg"; then
-	  pic_object=
-	  non_pic_object=
-
-	  # Read the .lo file
-	  func_source "$arg"
-
-	  if test -z "$pic_object" ||
-	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none &&
-	     test "$non_pic_object" = none; then
-	    func_fatal_error "cannot find name of object for \`$arg'"
-	  fi
-
-	  # Extract subdirectory from the argument.
-	  func_dirname "$arg" "/" ""
-	  xdir="$func_dirname_result"
-
-	  if test "$pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    pic_object="$xdir$pic_object"
-
-	    if test "$prev" = dlfiles; then
-	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		dlfiles="$dlfiles $pic_object"
-		prev=
-		continue
-	      else
-		# If libtool objects are unsupported, then we need to preload.
-		prev=dlprefiles
-	      fi
-	    fi
-
-	    # CHECK ME:  I think I busted this.  -Ossama
-	    if test "$prev" = dlprefiles; then
-	      # Preload the old-style object.
-	      dlprefiles="$dlprefiles $pic_object"
-	      prev=
-	    fi
-
-	    # A PIC object.
-	    func_append libobjs " $pic_object"
-	    arg="$pic_object"
-	  fi
-
-	  # Non-PIC object.
-	  if test "$non_pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    non_pic_object="$xdir$non_pic_object"
-
-	    # A standard non-PIC object
-	    func_append non_pic_objects " $non_pic_object"
-	    if test -z "$pic_object" || test "$pic_object" = none ; then
-	      arg="$non_pic_object"
-	    fi
-	  else
-	    # If the PIC object exists, use it instead.
-	    # $xdir was prepended to $pic_object above.
-	    non_pic_object="$pic_object"
-	    func_append non_pic_objects " $non_pic_object"
-	  fi
-	else
-	  # Only an error if not doing a dry-run.
-	  if $opt_dry_run; then
-	    # Extract subdirectory from the argument.
-	    func_dirname "$arg" "/" ""
-	    xdir="$func_dirname_result"
-
-	    func_lo2o "$arg"
-	    pic_object=$xdir$objdir/$func_lo2o_result
-	    non_pic_object=$xdir$func_lo2o_result
-	    func_append libobjs " $pic_object"
-	    func_append non_pic_objects " $non_pic_object"
-	  else
-	    func_fatal_error "\`$arg' is not a valid libtool object"
-	  fi
-	fi
-	;;
-
-      *.$libext)
-	# An archive.
-	deplibs="$deplibs $arg"
-	old_deplibs="$old_deplibs $arg"
-	continue
-	;;
-
-      *.la)
-	# A libtool-controlled library.
-
-	if test "$prev" = dlfiles; then
-	  # This library was specified with -dlopen.
-	  dlfiles="$dlfiles $arg"
-	  prev=
-	elif test "$prev" = dlprefiles; then
-	  # The library was specified with -dlpreopen.
-	  dlprefiles="$dlprefiles $arg"
-	  prev=
-	else
-	  deplibs="$deplibs $arg"
-	fi
-	continue
-	;;
-
-      # Some other compiler argument.
-      *)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	func_quote_for_eval "$arg"
-	arg="$func_quote_for_eval_result"
-	;;
-      esac # arg
-
-      # Now actually substitute the argument into the commands.
-      if test -n "$arg"; then
-	func_append compile_command " $arg"
-	func_append finalize_command " $arg"
-      fi
-    done # argument parsing loop
-
-    test -n "$prev" && \
-      func_fatal_help "the \`$prevarg' option requires an argument"
-
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-      eval arg=\"$export_dynamic_flag_spec\"
-      func_append compile_command " $arg"
-      func_append finalize_command " $arg"
-    fi
-
-    oldlibs=
-    # calculate the name of the file, without its directory
-    func_basename "$output"
-    outputname="$func_basename_result"
-    libobjs_save="$libobjs"
-
-    if test -n "$shlibpath_var"; then
-      # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-    else
-      shlib_search_path=
-    fi
-    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
-    func_dirname "$output" "/" ""
-    output_objdir="$func_dirname_result$objdir"
-    # Create the object directory.
-    func_mkdir_p "$output_objdir"
-
-    # Determine the type of output
-    case $output in
-    "")
-      func_fatal_help "you must specify an output file"
-      ;;
-    *.$libext) linkmode=oldlib ;;
-    *.lo | *.$objext) linkmode=obj ;;
-    *.la) linkmode=lib ;;
-    *) linkmode=prog ;; # Anything else should be a program.
-    esac
-
-    specialdeplibs=
-
-    libs=
-    # Find all interdependent deplibs by searching for libraries
-    # that are linked more than once (e.g. -la -lb -la)
-    for deplib in $deplibs; do
-      if $opt_duplicate_deps ; then
-	case "$libs " in
-	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	esac
-      fi
-      libs="$libs $deplib"
-    done
-
-    if test "$linkmode" = lib; then
-      libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
-      # Compute libraries that are listed more than once in $predeps
-      # $postdeps and mark them as special (i.e., whose duplicates are
-      # not to be eliminated).
-      pre_post_deps=
-      if $opt_duplicate_compiler_generated_deps; then
-	for pre_post_dep in $predeps $postdeps; do
-	  case "$pre_post_deps " in
-	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
-	  esac
-	  pre_post_deps="$pre_post_deps $pre_post_dep"
-	done
-      fi
-      pre_post_deps=
-    fi
-
-    deplibs=
-    newdependency_libs=
-    newlib_search_path=
-    need_relink=no # whether we're linking any uninstalled libtool libraries
-    notinst_deplibs= # not-installed libtool libraries
-    notinst_path= # paths that contain not-installed libtool libraries
-
-    case $linkmode in
-    lib)
-	passes="conv dlpreopen link"
-	for file in $dlfiles $dlprefiles; do
-	  case $file in
-	  *.la) ;;
-	  *)
-	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
-	    ;;
-	  esac
-	done
-	;;
-    prog)
-	compile_deplibs=
-	finalize_deplibs=
-	alldeplibs=no
-	newdlfiles=
-	newdlprefiles=
-	passes="conv scan dlopen dlpreopen link"
-	;;
-    *)  passes="conv"
-	;;
-    esac
-
-    for pass in $passes; do
-      # The preopen pass in lib mode reverses $deplibs; put it back here
-      # so that -L comes before libs that need it for instance...
-      if test "$linkmode,$pass" = "lib,link"; then
-	## FIXME: Find the place where the list is rebuilt in the wrong
-	##        order, and fix it there properly
-        tmp_deplibs=
-	for deplib in $deplibs; do
-	  tmp_deplibs="$deplib $tmp_deplibs"
-	done
-	deplibs="$tmp_deplibs"
-      fi
-
-      if test "$linkmode,$pass" = "lib,link" ||
-	 test "$linkmode,$pass" = "prog,scan"; then
-	libs="$deplibs"
-	deplibs=
-      fi
-      if test "$linkmode" = prog; then
-	case $pass in
-	dlopen) libs="$dlfiles" ;;
-	dlpreopen) libs="$dlprefiles" ;;
-	link)
-	  libs="$deplibs %DEPLIBS%"
-	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
-	  ;;
-	esac
-      fi
-      if test "$linkmode,$pass" = "lib,dlpreopen"; then
-	# Collect and forward deplibs of preopened libtool libs
-	for lib in $dlprefiles; do
-	  # Ignore non-libtool-libs
-	  dependency_libs=
-	  case $lib in
-	  *.la)	func_source "$lib" ;;
-	  esac
-
-	  # Collect preopened libtool deplibs, except any this library
-	  # has declared as weak libs
-	  for deplib in $dependency_libs; do
-            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
-	    case " $weak_libs " in
-	    *" $deplib_base "*) ;;
-	    *) deplibs="$deplibs $deplib" ;;
-	    esac
-	  done
-	done
-	libs="$dlprefiles"
-      fi
-      if test "$pass" = dlopen; then
-	# Collect dlpreopened libraries
-	save_deplibs="$deplibs"
-	deplibs=
-      fi
-
-      for deplib in $libs; do
-	lib=
-	found=no
-	case $deplib in
-	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
-	  if test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$deplib $compile_deplibs"
-	    finalize_deplibs="$deplib $finalize_deplibs"
-	  else
-	    compiler_flags="$compiler_flags $deplib"
-	    if test "$linkmode" = lib ; then
-		case "$new_inherited_linker_flags " in
-		    *" $deplib "*) ;;
-		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
-		esac
-	    fi
-	  fi
-	  continue
-	  ;;
-	-l*)
-	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    func_warning "\`-l' is ignored for archives/objects"
-	    continue
-	  fi
-	  func_stripname '-l' '' "$deplib"
-	  name=$func_stripname_result
-	  if test "$linkmode" = lib; then
-	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
-	  else
-	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
-	  fi
-	  for searchdir in $searchdirs; do
-	    for search_ext in .la $std_shrext .so .a; do
-	      # Search the libtool library
-	      lib="$searchdir/lib${name}${search_ext}"
-	      if test -f "$lib"; then
-		if test "$search_ext" = ".la"; then
-		  found=yes
-		else
-		  found=no
-		fi
-		break 2
-	      fi
-	    done
-	  done
-	  if test "$found" != yes; then
-	    # deplib doesn't seem to be a libtool library
-	    if test "$linkmode,$pass" = "prog,link"; then
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      deplibs="$deplib $deplibs"
-	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    continue
-	  else # deplib is a libtool library
-	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
-	    # We need to do some special things here, and not later.
-	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	      case " $predeps $postdeps " in
-	      *" $deplib "*)
-		if func_lalib_p "$lib"; then
-		  library_names=
-		  old_library=
-		  func_source "$lib"
-		  for l in $old_library $library_names; do
-		    ll="$l"
-		  done
-		  if test "X$ll" = "X$old_library" ; then # only static version available
-		    found=no
-		    func_dirname "$lib" "" "."
-		    ladir="$func_dirname_result"
-		    lib=$ladir/$old_library
-		    if test "$linkmode,$pass" = "prog,link"; then
-		      compile_deplibs="$deplib $compile_deplibs"
-		      finalize_deplibs="$deplib $finalize_deplibs"
-		    else
-		      deplibs="$deplib $deplibs"
-		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-		    fi
-		    continue
-		  fi
-		fi
-		;;
-	      *) ;;
-	      esac
-	    fi
-	  fi
-	  ;; # -l
-	*.ltframework)
-	  if test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$deplib $compile_deplibs"
-	    finalize_deplibs="$deplib $finalize_deplibs"
-	  else
-	    deplibs="$deplib $deplibs"
-	    if test "$linkmode" = lib ; then
-		case "$new_inherited_linker_flags " in
-		    *" $deplib "*) ;;
-		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
-		esac
-	    fi
-	  fi
-	  continue
-	  ;;
-	-L*)
-	  case $linkmode in
-	  lib)
-	    deplibs="$deplib $deplibs"
-	    test "$pass" = conv && continue
-	    newdependency_libs="$deplib $newdependency_libs"
-	    func_stripname '-L' '' "$deplib"
-	    newlib_search_path="$newlib_search_path $func_stripname_result"
-	    ;;
-	  prog)
-	    if test "$pass" = conv; then
-	      deplibs="$deplib $deplibs"
-	      continue
-	    fi
-	    if test "$pass" = scan; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    func_stripname '-L' '' "$deplib"
-	    newlib_search_path="$newlib_search_path $func_stripname_result"
-	    ;;
-	  *)
-	    func_warning "\`-L' is ignored for archives/objects"
-	    ;;
-	  esac # linkmode
-	  continue
-	  ;; # -L
-	-R*)
-	  if test "$pass" = link; then
-	    func_stripname '-R' '' "$deplib"
-	    dir=$func_stripname_result
-	    # Make sure the xrpath contains only unique directories.
-	    case "$xrpath " in
-	    *" $dir "*) ;;
-	    *) xrpath="$xrpath $dir" ;;
-	    esac
-	  fi
-	  deplibs="$deplib $deplibs"
-	  continue
-	  ;;
-	*.la) lib="$deplib" ;;
-	*.$libext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	    continue
-	  fi
-	  case $linkmode in
-	  lib)
-	    # Linking convenience modules into shared libraries is allowed,
-	    # but linking other static libraries is non-portable.
-	    case " $dlpreconveniencelibs " in
-	    *" $deplib "*) ;;
-	    *)
-	      valid_a_lib=no
-	      case $deplibs_check_method in
-		match_pattern*)
-		  set dummy $deplibs_check_method; shift
-		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-		  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
-		    | $EGREP "$match_pattern_regex" > /dev/null; then
-		    valid_a_lib=yes
-		  fi
-		;;
-		pass_all)
-		  valid_a_lib=yes
-		;;
-	      esac
-	      if test "$valid_a_lib" != yes; then
-		$ECHO
-		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
-		$ECHO "*** I have the capability to make that library automatically link in when"
-		$ECHO "*** you link to this library.  But I can only do this if you have a"
-		$ECHO "*** shared version of the library, which you do not appear to have"
-		$ECHO "*** because the file extensions .$libext of this argument makes me believe"
-		$ECHO "*** that it is just a static archive that I should not use here."
-	      else
-		$ECHO
-		$ECHO "*** Warning: Linking the shared library $output against the"
-		$ECHO "*** static library $deplib is not portable!"
-		deplibs="$deplib $deplibs"
-	      fi
-	      ;;
-	    esac
-	    continue
-	    ;;
-	  prog)
-	    if test "$pass" != link; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    continue
-	    ;;
-	  esac # linkmode
-	  ;; # *.$libext
-	*.lo | *.$objext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	  elif test "$linkmode" = prog; then
-	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	      # If there is no dlopen support or we're linking statically,
-	      # we need to preload.
-	      newdlprefiles="$newdlprefiles $deplib"
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      newdlfiles="$newdlfiles $deplib"
-	    fi
-	  fi
-	  continue
-	  ;;
-	%DEPLIBS%)
-	  alldeplibs=yes
-	  continue
-	  ;;
-	esac # case $deplib
-
-	if test "$found" = yes || test -f "$lib"; then :
-	else
-	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
-	fi
-
-	# Check to see that this really is a libtool archive.
-	func_lalib_unsafe_p "$lib" \
-	  || func_fatal_error "\`$lib' is not a valid libtool archive"
-
-	func_dirname "$lib" "" "."
-	ladir="$func_dirname_result"
-
-	dlname=
-	dlopen=
-	dlpreopen=
-	libdir=
-	library_names=
-	old_library=
-	inherited_linker_flags=
-	# If the library was installed with an old release of libtool,
-	# it will not redefine variables installed, or shouldnotlink
-	installed=yes
-	shouldnotlink=no
-	avoidtemprpath=
-
-
-	# Read the .la file
-	func_source "$lib"
-
-	# Convert "-framework foo" to "foo.ltframework"
-	if test -n "$inherited_linker_flags"; then
-	  tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
-	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
-	    case " $new_inherited_linker_flags " in
-	      *" $tmp_inherited_linker_flag "*) ;;
-	      *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
-	    esac
-	  done
-	fi
-	dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	if test "$linkmode,$pass" = "lib,link" ||
-	   test "$linkmode,$pass" = "prog,scan" ||
-	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
-	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
-	fi
-
-	if test "$pass" = conv; then
-	  # Only check for convenience libraries
-	  deplibs="$lib $deplibs"
-	  if test -z "$libdir"; then
-	    if test -z "$old_library"; then
-	      func_fatal_error "cannot find name of link library for \`$lib'"
-	    fi
-	    # It is a libtool convenience library, so add in its objects.
-	    convenience="$convenience $ladir/$objdir/$old_library"
-	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
-	    tmp_libs=
-	    for deplib in $dependency_libs; do
-	      deplibs="$deplib $deplibs"
-	      if $opt_duplicate_deps ; then
-		case "$tmp_libs " in
-		*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-		esac
-	      fi
-	      tmp_libs="$tmp_libs $deplib"
-	    done
-	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    func_fatal_error "\`$lib' is not a convenience library"
-	  fi
-	  continue
-	fi # $pass = conv
-
-
-	# Get the name of the library we link against.
-	linklib=
-	for l in $old_library $library_names; do
-	  linklib="$l"
-	done
-	if test -z "$linklib"; then
-	  func_fatal_error "cannot find name of link library for \`$lib'"
-	fi
-
-	# This library was specified with -dlopen.
-	if test "$pass" = dlopen; then
-	  if test -z "$libdir"; then
-	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
-	  fi
-	  if test -z "$dlname" ||
-	     test "$dlopen_support" != yes ||
-	     test "$build_libtool_libs" = no; then
-	    # If there is no dlname, no dlopen support or we're linking
-	    # statically, we need to preload.  We also need to preload any
-	    # dependent libraries so libltdl's deplib preloader doesn't
-	    # bomb out in the load deplibs phase.
-	    dlprefiles="$dlprefiles $lib $dependency_libs"
-	  else
-	    newdlfiles="$newdlfiles $lib"
-	  fi
-	  continue
-	fi # $pass = dlopen
-
-	# We need an absolute path.
-	case $ladir in
-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
-	*)
-	  abs_ladir=`cd "$ladir" && pwd`
-	  if test -z "$abs_ladir"; then
-	    func_warning "cannot determine absolute directory name of \`$ladir'"
-	    func_warning "passing it literally to the linker, although it might fail"
-	    abs_ladir="$ladir"
-	  fi
-	  ;;
-	esac
-	func_basename "$lib"
-	laname="$func_basename_result"
-
-	# Find the relevant object directory and library name.
-	if test "X$installed" = Xyes; then
-	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    func_warning "library \`$lib' was moved."
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    libdir="$abs_ladir"
-	  else
-	    dir="$libdir"
-	    absdir="$libdir"
-	  fi
-	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
-	else
-	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    # Remove this search path later
-	    notinst_path="$notinst_path $abs_ladir"
-	  else
-	    dir="$ladir/$objdir"
-	    absdir="$abs_ladir/$objdir"
-	    # Remove this search path later
-	    notinst_path="$notinst_path $abs_ladir"
-	  fi
-	fi # $installed = yes
-	func_stripname 'lib' '.la' "$laname"
-	name=$func_stripname_result
-
-	# This library was specified with -dlpreopen.
-	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir" && test "$linkmode" = prog; then
-	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
-	  fi
-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
-	  # are required to link).
-	  if test -n "$old_library"; then
-	    newdlprefiles="$newdlprefiles $dir/$old_library"
-	    # Keep a list of preopened convenience libraries to check
-	    # that they are being used correctly in the link pass.
-	    test -z "$libdir" && \
-		dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
-	  # Otherwise, use the dlname, so that lt_dlopen finds it.
-	  elif test -n "$dlname"; then
-	    newdlprefiles="$newdlprefiles $dir/$dlname"
-	  else
-	    newdlprefiles="$newdlprefiles $dir/$linklib"
-	  fi
-	fi # $pass = dlpreopen
-
-	if test -z "$libdir"; then
-	  # Link the convenience library
-	  if test "$linkmode" = lib; then
-	    deplibs="$dir/$old_library $deplibs"
-	  elif test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$dir/$old_library $compile_deplibs"
-	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
-	  else
-	    deplibs="$lib $deplibs" # used for prog,scan pass
-	  fi
-	  continue
-	fi
-
-
-	if test "$linkmode" = prog && test "$pass" != link; then
-	  newlib_search_path="$newlib_search_path $ladir"
-	  deplibs="$lib $deplibs"
-
-	  linkalldeplibs=no
-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
-	     test "$build_libtool_libs" = no; then
-	    linkalldeplibs=yes
-	  fi
-
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    case $deplib in
-	    -L*) func_stripname '-L' '' "$deplib"
-	         newlib_search_path="$newlib_search_path $func_stripname_result"
-		 ;;
-	    esac
-	    # Need to link against all dependency_libs?
-	    if test "$linkalldeplibs" = yes; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      # Need to hardcode shared library paths
-	      # or/and link against static libraries
-	      newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    if $opt_duplicate_deps ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done # for deplib
-	  continue
-	fi # $linkmode = prog...
-
-	if test "$linkmode,$pass" = "prog,link"; then
-	  if test -n "$library_names" &&
-	     { { test "$prefer_static_libs" = no ||
-	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
-	       test -z "$old_library"; }; then
-	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
-	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath:" in
-	      *"$absdir:"*) ;;
-	      *) temp_rpath="$temp_rpath$absdir:" ;;
-	      esac
-	    fi
-
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	  fi # $linkmode,$pass = prog,link...
-
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
-		 test -n "$library_names"; }; }; then
-	    # We only need to search for static libraries
-	    continue
-	  fi
-	fi
-
-	link_static=no # Whether the deplib will be linked statically
-	use_static_libs=$prefer_static_libs
-	if test "$use_static_libs" = built && test "$installed" = yes; then
-	  use_static_libs=no
-	fi
-	if test -n "$library_names" &&
-	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
-	  case $host in
-	  *cygwin* | *mingw* | *cegcc*)
-	      # No point in relinking DLLs because paths are not encoded
-	      notinst_deplibs="$notinst_deplibs $lib"
-	      need_relink=no
-	    ;;
-	  *)
-	    if test "$installed" = no; then
-	      notinst_deplibs="$notinst_deplibs $lib"
-	      need_relink=yes
-	    fi
-	    ;;
-	  esac
-	  # This is a shared library
-
-	  # Warn about portability, can't link against -module's on some
-	  # systems (darwin).  Don't bleat about dlopened modules though!
-	  dlopenmodule=""
-	  for dlpremoduletest in $dlprefiles; do
-	    if test "X$dlpremoduletest" = "X$lib"; then
-	      dlopenmodule="$dlpremoduletest"
-	      break
-	    fi
-	  done
-	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
-	    $ECHO
-	    if test "$linkmode" = prog; then
-	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
-	    else
-	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
-	    fi
-	    $ECHO "*** $linklib is not portable!"
-	  fi
-	  if test "$linkmode" = lib &&
-	     test "$hardcode_into_libs" = yes; then
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	  fi
-
-	  if test -n "$old_archive_from_expsyms_cmds"; then
-	    # figure out the soname
-	    set dummy $library_names
-	    shift
-	    realname="$1"
-	    shift
-	    libname=`eval "\\$ECHO \"$libname_spec\""`
-	    # use dlname if we got it. it's perfectly good, no?
-	    if test -n "$dlname"; then
-	      soname="$dlname"
-	    elif test -n "$soname_spec"; then
-	      # bleh windows
-	      case $host in
-	      *cygwin* | mingw* | *cegcc*)
-	        func_arith $current - $age
-		major=$func_arith_result
-		versuffix="-$major"
-		;;
-	      esac
-	      eval soname=\"$soname_spec\"
-	    else
-	      soname="$realname"
-	    fi
-
-	    # Make a new name for the extract_expsyms_cmds to use
-	    soroot="$soname"
-	    func_basename "$soroot"
-	    soname="$func_basename_result"
-	    func_stripname 'lib' '.dll' "$soname"
-	    newlib=libimp-$func_stripname_result.a
-
-	    # If the library has no export list, then create one now
-	    if test -f "$output_objdir/$soname-def"; then :
-	    else
-	      func_verbose "extracting exported symbol list from \`$soname'"
-	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
-	    fi
-
-	    # Create $newlib
-	    if test -f "$output_objdir/$newlib"; then :; else
-	      func_verbose "generating import library for \`$soname'"
-	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
-	    fi
-	    # make sure the library variables are pointing to the new library
-	    dir=$output_objdir
-	    linklib=$newlib
-	  fi # test -n "$old_archive_from_expsyms_cmds"
-
-	  if test "$linkmode" = prog || test "$mode" != relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    lib_linked=yes
-	    case $hardcode_action in
-	    immediate | unsupported)
-	      if test "$hardcode_direct" = no; then
-		add="$dir/$linklib"
-		case $host in
-		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
-		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
-		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
-		    *-*-unixware7*) add_dir="-L$dir" ;;
-		  *-*-darwin* )
-		    # if the lib is a (non-dlopened) module then we can not
-		    # link against it, someone is ignoring the earlier warnings
-		    if /usr/bin/file -L $add 2> /dev/null |
-			 $GREP ": [^:]* bundle" >/dev/null ; then
-		      if test "X$dlopenmodule" != "X$lib"; then
-			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
-			if test -z "$old_library" ; then
-			  $ECHO
-			  $ECHO "*** And there doesn't seem to be a static archive available"
-			  $ECHO "*** The link will probably fail, sorry"
-			else
-			  add="$dir/$old_library"
-			fi
-		      elif test -n "$old_library"; then
-			add="$dir/$old_library"
-		      fi
-		    fi
-		esac
-	      elif test "$hardcode_minus_L" = no; then
-		case $host in
-		*-*-sunos*) add_shlibpath="$dir" ;;
-		esac
-		add_dir="-L$dir"
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = no; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    relink)
-	      if test "$hardcode_direct" = yes &&
-	         test "$hardcode_direct_absolute" = no; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$dir"
-		# Try looking first in the location we're being installed to.
-		if test -n "$inst_prefix_dir"; then
-		  case $libdir in
-		    [\\/]*)
-		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
-		      ;;
-		  esac
-		fi
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = yes; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    *) lib_linked=no ;;
-	    esac
-
-	    if test "$lib_linked" != yes; then
-	      func_fatal_configuration "unsupported hardcode properties"
-	    fi
-
-	    if test -n "$add_shlibpath"; then
-	      case :$compile_shlibpath: in
-	      *":$add_shlibpath:"*) ;;
-	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
-	      esac
-	    fi
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
-	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes &&
-		 test "$hardcode_minus_L" != yes &&
-		 test "$hardcode_shlibpath_var" = yes; then
-		case :$finalize_shlibpath: in
-		*":$libdir:"*) ;;
-		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-		esac
-	      fi
-	    fi
-	  fi
-
-	  if test "$linkmode" = prog || test "$mode" = relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes &&
-	       test "$hardcode_direct_absolute" = no; then
-	      add="$libdir/$linklib"
-	    elif test "$hardcode_minus_L" = yes; then
-	      add_dir="-L$libdir"
-	      add="-l$name"
-	    elif test "$hardcode_shlibpath_var" = yes; then
-	      case :$finalize_shlibpath: in
-	      *":$libdir:"*) ;;
-	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-	      esac
-	      add="-l$name"
-	    elif test "$hardcode_automatic" = yes; then
-	      if test -n "$inst_prefix_dir" &&
-		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
-		add="$inst_prefix_dir$libdir/$linklib"
-	      else
-		add="$libdir/$linklib"
-	      fi
-	    else
-	      # We cannot seem to hardcode it, guess we'll fake it.
-	      add_dir="-L$libdir"
-	      # Try looking first in the location we're being installed to.
-	      if test -n "$inst_prefix_dir"; then
-		case $libdir in
-		  [\\/]*)
-		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
-		    ;;
-		esac
-	      fi
-	      add="-l$name"
-	    fi
-
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
-	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	    fi
-	  fi
-	elif test "$linkmode" = prog; then
-	  # Here we assume that one of hardcode_direct or hardcode_minus_L
-	  # is not unsupported.  This is valid on all known static and
-	  # shared platforms.
-	  if test "$hardcode_direct" != unsupported; then
-	    test -n "$old_library" && linklib="$old_library"
-	    compile_deplibs="$dir/$linklib $compile_deplibs"
-	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
-	  else
-	    compile_deplibs="-l$name -L$dir $compile_deplibs"
-	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
-	  fi
-	elif test "$build_libtool_libs" = yes; then
-	  # Not a shared library
-	  if test "$deplibs_check_method" != pass_all; then
-	    # We're trying link a shared library against a static one
-	    # but the system doesn't support it.
-
-	    # Just print a warning and add the library to dependency_libs so
-	    # that the program can be linked against the static library.
-	    $ECHO
-	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
-	    $ECHO "*** I have the capability to make that library automatically link in when"
-	    $ECHO "*** you link to this library.  But I can only do this if you have a"
-	    $ECHO "*** shared version of the library, which you do not appear to have."
-	    if test "$module" = yes; then
-	      $ECHO "*** But as you try to build a module library, libtool will still create "
-	      $ECHO "*** a static module, that should work as long as the dlopening application"
-	      $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
-	      if test -z "$global_symbol_pipe"; then
-		$ECHO
-		$ECHO "*** However, this would only work if libtool was able to extract symbol"
-		$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		$ECHO "*** not find such a program.  So, this module is probably useless."
-		$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
-	      fi
-	      if test "$build_old_libs" = no; then
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  else
-	    deplibs="$dir/$old_library $deplibs"
-	    link_static=yes
-	  fi
-	fi # link shared/static library?
-
-	if test "$linkmode" = lib; then
-	  if test -n "$dependency_libs" &&
-	     { test "$hardcode_into_libs" != yes ||
-	       test "$build_old_libs" = yes ||
-	       test "$link_static" = yes; }; then
-	    # Extract -R from dependency_libs
-	    temp_deplibs=
-	    for libdir in $dependency_libs; do
-	      case $libdir in
-	      -R*) func_stripname '-R' '' "$libdir"
-	           temp_xrpath=$func_stripname_result
-		   case " $xrpath " in
-		   *" $temp_xrpath "*) ;;
-		   *) xrpath="$xrpath $temp_xrpath";;
-		   esac;;
-	      *) temp_deplibs="$temp_deplibs $libdir";;
-	      esac
-	    done
-	    dependency_libs="$temp_deplibs"
-	  fi
-
-	  newlib_search_path="$newlib_search_path $absdir"
-	  # Link against this library
-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
-	  # ... and its dependency_libs
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    newdependency_libs="$deplib $newdependency_libs"
-	    if $opt_duplicate_deps ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done
-
-	  if test "$link_all_deplibs" != no; then
-	    # Add the search paths of all dependency libraries
-	    for deplib in $dependency_libs; do
-	      path=
-	      case $deplib in
-	      -L*) path="$deplib" ;;
-	      *.la)
-	        func_dirname "$deplib" "" "."
-		dir="$func_dirname_result"
-		# We need an absolute path.
-		case $dir in
-		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-		*)
-		  absdir=`cd "$dir" && pwd`
-		  if test -z "$absdir"; then
-		    func_warning "cannot determine absolute directory name of \`$dir'"
-		    absdir="$dir"
-		  fi
-		  ;;
-		esac
-		if $GREP "^installed=no" $deplib > /dev/null; then
-		case $host in
-		*-*-darwin*)
-		  depdepl=
-		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-		  if test -n "$deplibrary_names" ; then
-		    for tmp in $deplibrary_names ; do
-		      depdepl=$tmp
-		    done
-		    if test -f "$absdir/$objdir/$depdepl" ; then
-		      depdepl="$absdir/$objdir/$depdepl"
-		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
-                      if test -z "$darwin_install_name"; then
-                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
-                      fi
-		      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
-		      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
-		      path=
-		    fi
-		  fi
-		  ;;
-		*)
-		  path="-L$absdir/$objdir"
-		  ;;
-		esac
-		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		  test -z "$libdir" && \
-		    func_fatal_error "\`$deplib' is not a valid libtool archive"
-		  test "$absdir" != "$libdir" && \
-		    func_warning "\`$deplib' seems to be moved"
-
-		  path="-L$absdir"
-		fi
-		;;
-	      esac
-	      case " $deplibs " in
-	      *" $path "*) ;;
-	      *) deplibs="$path $deplibs" ;;
-	      esac
-	    done
-	  fi # link_all_deplibs != no
-	fi # linkmode = lib
-      done # for deplib in $libs
-      if test "$pass" = link; then
-	if test "$linkmode" = "prog"; then
-	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
-	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
-	else
-	  compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	fi
-      fi
-      dependency_libs="$newdependency_libs"
-      if test "$pass" = dlpreopen; then
-	# Link the dlpreopened libraries before other libraries
-	for deplib in $save_deplibs; do
-	  deplibs="$deplib $deplibs"
-	done
-      fi
-      if test "$pass" != dlopen; then
-	if test "$pass" != conv; then
-	  # Make sure lib_search_path contains only unique directories.
-	  lib_search_path=
-	  for dir in $newlib_search_path; do
-	    case "$lib_search_path " in
-	    *" $dir "*) ;;
-	    *) lib_search_path="$lib_search_path $dir" ;;
-	    esac
-	  done
-	  newlib_search_path=
-	fi
-
-	if test "$linkmode,$pass" != "prog,link"; then
-	  vars="deplibs"
-	else
-	  vars="compile_deplibs finalize_deplibs"
-	fi
-	for var in $vars dependency_libs; do
-	  # Add libraries to $var in reverse order
-	  eval tmp_libs=\"\$$var\"
-	  new_libs=
-	  for deplib in $tmp_libs; do
-	    # FIXME: Pedantically, this is the right thing to do, so
-	    #        that some nasty dependency loop isn't accidentally
-	    #        broken:
-	    #new_libs="$deplib $new_libs"
-	    # Pragmatically, this seems to cause very few problems in
-	    # practice:
-	    case $deplib in
-	    -L*) new_libs="$deplib $new_libs" ;;
-	    -R*) ;;
-	    *)
-	      # And here is the reason: when a library appears more
-	      # than once as an explicit dependence of a library, or
-	      # is implicitly linked in more than once by the
-	      # compiler, it is considered special, and multiple
-	      # occurrences thereof are not removed.  Compare this
-	      # with having the same library being listed as a
-	      # dependency of multiple other libraries: in this case,
-	      # we know (pedantically, we assume) the library does not
-	      # need to be listed more than once, so we keep only the
-	      # last copy.  This is not always right, but it is rare
-	      # enough that we require users that really mean to play
-	      # such unportable linking tricks to link the library
-	      # using -Wl,-lname, so that libtool does not consider it
-	      # for duplicate removal.
-	      case " $specialdeplibs " in
-	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
-	      *)
-		case " $new_libs " in
-		*" $deplib "*) ;;
-		*) new_libs="$deplib $new_libs" ;;
-		esac
-		;;
-	      esac
-	      ;;
-	    esac
-	  done
-	  tmp_libs=
-	  for deplib in $new_libs; do
-	    case $deplib in
-	    -L*)
-	      case " $tmp_libs " in
-	      *" $deplib "*) ;;
-	      *) tmp_libs="$tmp_libs $deplib" ;;
-	      esac
-	      ;;
-	    *) tmp_libs="$tmp_libs $deplib" ;;
-	    esac
-	  done
-	  eval $var=\"$tmp_libs\"
-	done # for var
-      fi
-      # Last step: remove runtime libs from dependency_libs
-      # (they stay in deplibs)
-      tmp_libs=
-      for i in $dependency_libs ; do
-	case " $predeps $postdeps $compiler_lib_search_path " in
-	*" $i "*)
-	  i=""
-	  ;;
-	esac
-	if test -n "$i" ; then
-	  tmp_libs="$tmp_libs $i"
-	fi
-      done
-      dependency_libs=$tmp_libs
-    done # for pass
-    if test "$linkmode" = prog; then
-      dlfiles="$newdlfiles"
-    fi
-    if test "$linkmode" = prog || test "$linkmode" = lib; then
-      dlprefiles="$newdlprefiles"
-    fi
-
-    case $linkmode in
-    oldlib)
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	func_warning "\`-dlopen' is ignored for archives"
-      fi
-
-      case " $deplibs" in
-      *\ -l* | *\ -L*)
-	func_warning "\`-l' and \`-L' are ignored for archives" ;;
-      esac
-
-      test -n "$rpath" && \
-	func_warning "\`-rpath' is ignored for archives"
-
-      test -n "$xrpath" && \
-	func_warning "\`-R' is ignored for archives"
-
-      test -n "$vinfo" && \
-	func_warning "\`-version-info/-version-number' is ignored for archives"
-
-      test -n "$release" && \
-	func_warning "\`-release' is ignored for archives"
-
-      test -n "$export_symbols$export_symbols_regex" && \
-	func_warning "\`-export-symbols' is ignored for archives"
-
-      # Now set the variables for building old libraries.
-      build_libtool_libs=no
-      oldlibs="$output"
-      objs="$objs$old_deplibs"
-      ;;
-
-    lib)
-      # Make sure we only generate libraries of the form `libNAME.la'.
-      case $outputname in
-      lib*)
-	func_stripname 'lib' '.la' "$outputname"
-	name=$func_stripname_result
-	eval shared_ext=\"$shrext_cmds\"
-	eval libname=\"$libname_spec\"
-	;;
-      *)
-	test "$module" = no && \
-	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
-
-	if test "$need_lib_prefix" != no; then
-	  # Add the "lib" prefix for modules if required
-	  func_stripname '' '.la' "$outputname"
-	  name=$func_stripname_result
-	  eval shared_ext=\"$shrext_cmds\"
-	  eval libname=\"$libname_spec\"
-	else
-	  func_stripname '' '.la' "$outputname"
-	  libname=$func_stripname_result
-	fi
-	;;
-      esac
-
-      if test -n "$objs"; then
-	if test "$deplibs_check_method" != pass_all; then
-	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
-	else
-	  $ECHO
-	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
-	  $ECHO "*** objects $objs is not portable!"
-	  libobjs="$libobjs $objs"
-	fi
-      fi
-
-      test "$dlself" != no && \
-	func_warning "\`-dlopen self' is ignored for libtool libraries"
-
-      set dummy $rpath
-      shift
-      test "$#" -gt 1 && \
-	func_warning "ignoring multiple \`-rpath's for a libtool library"
-
-      install_libdir="$1"
-
-      oldlibs=
-      if test -z "$rpath"; then
-	if test "$build_libtool_libs" = yes; then
-	  # Building a libtool convenience library.
-	  # Some compilers have problems with a `.al' extension so
-	  # convenience libraries should have the same extension an
-	  # archive normally would.
-	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
-	  build_libtool_libs=convenience
-	  build_old_libs=yes
-	fi
-
-	test -n "$vinfo" && \
-	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
-
-	test -n "$release" && \
-	  func_warning "\`-release' is ignored for convenience libraries"
-      else
-
-	# Parse the version information argument.
-	save_ifs="$IFS"; IFS=':'
-	set dummy $vinfo 0 0 0
-	shift
-	IFS="$save_ifs"
-
-	test -n "$7" && \
-	  func_fatal_help "too many parameters to \`-version-info'"
-
-	# convert absolute version numbers to libtool ages
-	# this retains compatibility with .la files and attempts
-	# to make the code below a bit more comprehensible
-
-	case $vinfo_number in
-	yes)
-	  number_major="$1"
-	  number_minor="$2"
-	  number_revision="$3"
-	  #
-	  # There are really only two kinds -- those that
-	  # use the current revision as the major version
-	  # and those that subtract age and use age as
-	  # a minor version.  But, then there is irix
-	  # which has an extra 1 added just for fun
-	  #
-	  case $version_type in
-	  darwin|linux|osf|windows|none)
-	    func_arith $number_major + $number_minor
-	    current=$func_arith_result
-	    age="$number_minor"
-	    revision="$number_revision"
-	    ;;
-	  freebsd-aout|freebsd-elf|sunos)
-	    current="$number_major"
-	    revision="$number_minor"
-	    age="0"
-	    ;;
-	  irix|nonstopux)
-	    func_arith $number_major + $number_minor
-	    current=$func_arith_result
-	    age="$number_minor"
-	    revision="$number_minor"
-	    lt_irix_increment=no
-	    ;;
-	  *)
-	    func_fatal_configuration "$modename: unknown library version type \`$version_type'"
-	    ;;
-	  esac
-	  ;;
-	no)
-	  current="$1"
-	  revision="$2"
-	  age="$3"
-	  ;;
-	esac
-
-	# Check that each of the things are valid numbers.
-	case $current in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  func_error "CURRENT \`$current' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
-	  ;;
-	esac
-
-	case $revision in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  func_error "REVISION \`$revision' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
-	  ;;
-	esac
-
-	case $age in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  func_error "AGE \`$age' must be a nonnegative integer"
-	  func_fatal_error "\`$vinfo' is not valid version information"
-	  ;;
-	esac
-
-	if test "$age" -gt "$current"; then
-	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
-	  func_fatal_error "\`$vinfo' is not valid version information"
-	fi
-
-	# Calculate the version variables.
-	major=
-	versuffix=
-	verstring=
-	case $version_type in
-	none) ;;
-
-	darwin)
-	  # Like Linux, but with the current version available in
-	  # verstring for coding it into the library header
-	  func_arith $current - $age
-	  major=.$func_arith_result
-	  versuffix="$major.$age.$revision"
-	  # Darwin ld doesn't like 0 for these options...
-	  func_arith $current + 1
-	  minor_current=$func_arith_result
-	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
-	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
-	  ;;
-
-	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
-	  ;;
-
-	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current"
-	  ;;
-
-	irix | nonstopux)
-	  if test "X$lt_irix_increment" = "Xno"; then
-	    func_arith $current - $age
-	  else
-	    func_arith $current - $age + 1
-	  fi
-	  major=$func_arith_result
-
-	  case $version_type in
-	    nonstopux) verstring_prefix=nonstopux ;;
-	    *)         verstring_prefix=sgi ;;
-	  esac
-	  verstring="$verstring_prefix$major.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$revision
-	  while test "$loop" -ne 0; do
-	    func_arith $revision - $loop
-	    iface=$func_arith_result
-	    func_arith $loop - 1
-	    loop=$func_arith_result
-	    verstring="$verstring_prefix$major.$iface:$verstring"
-	  done
-
-	  # Before this point, $major must not contain `.'.
-	  major=.$major
-	  versuffix="$major.$revision"
-	  ;;
-
-	linux)
-	  func_arith $current - $age
-	  major=.$func_arith_result
-	  versuffix="$major.$age.$revision"
-	  ;;
-
-	osf)
-	  func_arith $current - $age
-	  major=.$func_arith_result
-	  versuffix=".$current.$age.$revision"
-	  verstring="$current.$age.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$age
-	  while test "$loop" -ne 0; do
-	    func_arith $current - $loop
-	    iface=$func_arith_result
-	    func_arith $loop - 1
-	    loop=$func_arith_result
-	    verstring="$verstring:${iface}.0"
-	  done
-
-	  # Make executables depend on our current version.
-	  verstring="$verstring:${current}.0"
-	  ;;
-
-	qnx)
-	  major=".$current"
-	  versuffix=".$current"
-	  ;;
-
-	sunos)
-	  major=".$current"
-	  versuffix=".$current.$revision"
-	  ;;
-
-	windows)
-	  # Use '-' rather than '.', since we only want one
-	  # extension on DOS 8.3 filesystems.
-	  func_arith $current - $age
-	  major=$func_arith_result
-	  versuffix="-$major"
-	  ;;
-
-	*)
-	  func_fatal_configuration "unknown library version type \`$version_type'"
-	  ;;
-	esac
-
-	# Clear the version info if we defaulted, and they specified a release.
-	if test -z "$vinfo" && test -n "$release"; then
-	  major=
-	  case $version_type in
-	  darwin)
-	    # we can't check for "0.0" in archive_cmds due to quoting
-	    # problems, so we reset it completely
-	    verstring=
-	    ;;
-	  *)
-	    verstring="0.0"
-	    ;;
-	  esac
-	  if test "$need_version" = no; then
-	    versuffix=
-	  else
-	    versuffix=".0.0"
-	  fi
-	fi
-
-	# Remove version info from name if versioning should be avoided
-	if test "$avoid_version" = yes && test "$need_version" = no; then
-	  major=
-	  versuffix=
-	  verstring=""
-	fi
-
-	# Check to see if the archive will have undefined symbols.
-	if test "$allow_undefined" = yes; then
-	  if test "$allow_undefined_flag" = unsupported; then
-	    func_warning "undefined symbols not allowed in $host shared libraries"
-	    build_libtool_libs=no
-	    build_old_libs=yes
-	  fi
-	else
-	  # Don't allow undefined symbols.
-	  allow_undefined_flag="$no_undefined_flag"
-	fi
-
-      fi
-
-      func_generate_dlsyms "$libname" "$libname" "yes"
-      libobjs="$libobjs $symfileobj"
-      test "X$libobjs" = "X " && libobjs=
-
-      if test "$mode" != relink; then
-	# Remove our outputs, but don't remove object files since they
-	# may have been created when compiling PIC objects.
-	removelist=
-	tempremovelist=`$ECHO "$output_objdir/*"`
-	for p in $tempremovelist; do
-	  case $p in
-	    *.$objext | *.gcno)
-	       ;;
-	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-	       if test "X$precious_files_regex" != "X"; then
-		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
-		 then
-		   continue
-		 fi
-	       fi
-	       removelist="$removelist $p"
-	       ;;
-	    *) ;;
-	  esac
-	done
-	test -n "$removelist" && \
-	  func_show_eval "${RM}r \$removelist"
-      fi
-
-      # Now set the variables for building old libraries.
-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-	oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
-	# Transform .lo files to .o files.
-	oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
-      fi
-
-      # Eliminate all temporary directories.
-      #for path in $notinst_path; do
-      #	lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
-      #	deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
-      #	dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
-      #done
-
-      if test -n "$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	temp_xrpath=
-	for libdir in $xrpath; do
-	  temp_xrpath="$temp_xrpath -R$libdir"
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
-	  dependency_libs="$temp_xrpath $dependency_libs"
-	fi
-      fi
-
-      # Make sure dlfiles contains only unique files that won't be dlpreopened
-      old_dlfiles="$dlfiles"
-      dlfiles=
-      for lib in $old_dlfiles; do
-	case " $dlprefiles $dlfiles " in
-	*" $lib "*) ;;
-	*) dlfiles="$dlfiles $lib" ;;
-	esac
-      done
-
-      # Make sure dlprefiles contains only unique files
-      old_dlprefiles="$dlprefiles"
-      dlprefiles=
-      for lib in $old_dlprefiles; do
-	case "$dlprefiles " in
-	*" $lib "*) ;;
-	*) dlprefiles="$dlprefiles $lib" ;;
-	esac
-      done
-
-      if test "$build_libtool_libs" = yes; then
-	if test -n "$rpath"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
-	    # these systems don't actually have a c library (as such)!
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C library is in the System framework
-	    deplibs="$deplibs System.ltframework"
-	    ;;
-	  *-*-netbsd*)
-	    # Don't link with libc until the a.out ld.so is fixed.
-	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	    # Do not include libc due to us having libc/libc_r.
-	    ;;
-	  *-*-sco3.2v5* | *-*-sco5v6*)
-	    # Causes problems with __ctype
-	    ;;
-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-	    # Compiler inserts libc in the correct place for threads to work
-	    ;;
-	  *)
-	    # Add libc to deplibs on all other systems if necessary.
-	    if test "$build_libtool_need_lc" = "yes"; then
-	      deplibs="$deplibs -lc"
-	    fi
-	    ;;
-	  esac
-	fi
-
-	# Transform deplibs into only deplibs that can be linked in shared.
-	name_save=$name
-	libname_save=$libname
-	release_save=$release
-	versuffix_save=$versuffix
-	major_save=$major
-	# I'm not sure if I'm treating the release correctly.  I think
-	# release should show up in the -l (ie -lgmp5) so we don't want to
-	# add it in twice.  Is that correct?
-	release=""
-	versuffix=""
-	major=""
-	newdeplibs=
-	droppeddeps=no
-	case $deplibs_check_method in
-	pass_all)
-	  # Don't check for shared/static.  Everything works.
-	  # This might be a little naive.  We might want to check
-	  # whether the library exists or not.  But this is on
-	  # osf3 & osf4 and I'm not really sure... Just
-	  # implementing what was already the behavior.
-	  newdeplibs=$deplibs
-	  ;;
-	test_compile)
-	  # This code stresses the "libraries are programs" paradigm to its
-	  # limits. Maybe even breaks it.  We compile a program, linking it
-	  # against the deplibs as a proxy for the library.  Then we can check
-	  # whether they linked in statically or dynamically with ldd.
-	  $opt_dry_run || $RM conftest.c
-	  cat > conftest.c <<EOF
-	  int main() { return 0; }
-EOF
-	  $opt_dry_run || $RM conftest
-	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
-	    ldd_output=`ldd conftest`
-	    for i in $deplibs; do
-	      case $i in
-	      -l*)
-		func_stripname -l '' "$i"
-		name=$func_stripname_result
-		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		  case " $predeps $postdeps " in
-		  *" $i "*)
-		    newdeplibs="$newdeplibs $i"
-		    i=""
-		    ;;
-		  esac
-		fi
-		if test -n "$i" ; then
-		  libname=`eval "\\$ECHO \"$libname_spec\""`
-		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
-		  set dummy $deplib_matches; shift
-		  deplib_match=$1
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		    newdeplibs="$newdeplibs $i"
-		  else
-		    droppeddeps=yes
-		    $ECHO
-		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		    $ECHO "*** I have the capability to make that library automatically link in when"
-		    $ECHO "*** you link to this library.  But I can only do this if you have a"
-		    $ECHO "*** shared version of the library, which I believe you do not have"
-		    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
-		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
-		  fi
-		fi
-		;;
-	      *)
-		newdeplibs="$newdeplibs $i"
-		;;
-	      esac
-	    done
-	  else
-	    # Error occurred in the first compile.  Let's try to salvage
-	    # the situation: Compile a separate program for each library.
-	    for i in $deplibs; do
-	      case $i in
-	      -l*)
-		func_stripname -l '' "$i"
-		name=$func_stripname_result
-		$opt_dry_run || $RM conftest
-		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
-		  ldd_output=`ldd conftest`
-		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		    case " $predeps $postdeps " in
-		    *" $i "*)
-		      newdeplibs="$newdeplibs $i"
-		      i=""
-		      ;;
-		    esac
-		  fi
-		  if test -n "$i" ; then
-		    libname=`eval "\\$ECHO \"$libname_spec\""`
-		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
-		    set dummy $deplib_matches; shift
-		    deplib_match=$1
-		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		      newdeplibs="$newdeplibs $i"
-		    else
-		      droppeddeps=yes
-		      $ECHO
-		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		      $ECHO "*** I have the capability to make that library automatically link in when"
-		      $ECHO "*** you link to this library.  But I can only do this if you have a"
-		      $ECHO "*** shared version of the library, which you do not appear to have"
-		      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
-		      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
-		    fi
-		  fi
-		else
-		  droppeddeps=yes
-		  $ECHO
-		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $ECHO "*** make it link in!  You will probably need to install it or some"
-		  $ECHO "*** library that it depends on before this library will be fully"
-		  $ECHO "*** functional.  Installing it before continuing would be even better."
-		fi
-		;;
-	      *)
-		newdeplibs="$newdeplibs $i"
-		;;
-	      esac
-	    done
-	  fi
-	  ;;
-	file_magic*)
-	  set dummy $deplibs_check_method; shift
-	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    case $a_deplib in
-	    -l*)
-	      func_stripname -l '' "$a_deplib"
-	      name=$func_stripname_result
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		case " $predeps $postdeps " in
-		*" $a_deplib "*)
-		  newdeplibs="$newdeplibs $a_deplib"
-		  a_deplib=""
-		  ;;
-		esac
-	      fi
-	      if test -n "$a_deplib" ; then
-		libname=`eval "\\$ECHO \"$libname_spec\""`
-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		  for potent_lib in $potential_libs; do
-		      # Follow soft links.
-		      if ls -lLd "$potent_lib" 2>/dev/null |
-			 $GREP " -> " >/dev/null; then
-			continue
-		      fi
-		      # The statement above tries to avoid entering an
-		      # endless loop below, in case of cyclic links.
-		      # We might still enter an endless loop, since a link
-		      # loop can be closed while we follow links,
-		      # but so what?
-		      potlib="$potent_lib"
-		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
-			case $potliblink in
-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
-			esac
-		      done
-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
-			 $SED -e 10q |
-			 $EGREP "$file_magic_regex" > /dev/null; then
-			newdeplibs="$newdeplibs $a_deplib"
-			a_deplib=""
-			break 2
-		      fi
-		  done
-		done
-	      fi
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		$ECHO
-		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		$ECHO "*** I have the capability to make that library automatically link in when"
-		$ECHO "*** you link to this library.  But I can only do this if you have a"
-		$ECHO "*** shared version of the library, which you do not appear to have"
-		$ECHO "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
-		else
-		  $ECHO "*** with $libname and none of the candidates passed a file format test"
-		  $ECHO "*** using a file magic. Last file checked: $potlib"
-		fi
-	      fi
-	      ;;
-	    *)
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	      ;;
-	    esac
-	  done # Gone through all deplibs.
-	  ;;
-	match_pattern*)
-	  set dummy $deplibs_check_method; shift
-	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    case $a_deplib in
-	    -l*)
-	      func_stripname -l '' "$a_deplib"
-	      name=$func_stripname_result
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		case " $predeps $postdeps " in
-		*" $a_deplib "*)
-		  newdeplibs="$newdeplibs $a_deplib"
-		  a_deplib=""
-		  ;;
-		esac
-	      fi
-	      if test -n "$a_deplib" ; then
-		libname=`eval "\\$ECHO \"$libname_spec\""`
-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		  for potent_lib in $potential_libs; do
-		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
-		       $EGREP "$match_pattern_regex" > /dev/null; then
-		      newdeplibs="$newdeplibs $a_deplib"
-		      a_deplib=""
-		      break 2
-		    fi
-		  done
-		done
-	      fi
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		$ECHO
-		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		$ECHO "*** I have the capability to make that library automatically link in when"
-		$ECHO "*** you link to this library.  But I can only do this if you have a"
-		$ECHO "*** shared version of the library, which you do not appear to have"
-		$ECHO "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
-		else
-		  $ECHO "*** with $libname and none of the candidates passed a file format test"
-		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
-		fi
-	      fi
-	      ;;
-	    *)
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	      ;;
-	    esac
-	  done # Gone through all deplibs.
-	  ;;
-	none | unknown | *)
-	  newdeplibs=""
-	  tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
-	      -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
-	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	    for i in $predeps $postdeps ; do
-	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
-	    done
-	  fi
-	  if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[	 ]//g' |
-	     $GREP . >/dev/null; then
-	    $ECHO
-	    if test "X$deplibs_check_method" = "Xnone"; then
-	      $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
-	    else
-	      $ECHO "*** Warning: inter-library dependencies are not known to be supported."
-	    fi
-	    $ECHO "*** All declared inter-library dependencies are being dropped."
-	    droppeddeps=yes
-	  fi
-	  ;;
-	esac
-	versuffix=$versuffix_save
-	major=$major_save
-	release=$release_save
-	libname=$libname_save
-	name=$name_save
-
-	case $host in
-	*-*-rhapsody* | *-*-darwin1.[012])
-	  # On Rhapsody replace the C library with the System framework
-	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
-	  ;;
-	esac
-
-	if test "$droppeddeps" = yes; then
-	  if test "$module" = yes; then
-	    $ECHO
-	    $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
-	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
-	    $ECHO "*** a static module, that should work as long as the dlopening"
-	    $ECHO "*** application is linked with the -dlopen flag."
-	    if test -z "$global_symbol_pipe"; then
-	      $ECHO
-	      $ECHO "*** However, this would only work if libtool was able to extract symbol"
-	      $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      $ECHO "*** not find such a program.  So, this module is probably useless."
-	      $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
-	    fi
-	    if test "$build_old_libs" = no; then
-	      oldlibs="$output_objdir/$libname.$libext"
-	      build_libtool_libs=module
-	      build_old_libs=yes
-	    else
-	      build_libtool_libs=no
-	    fi
-	  else
-	    $ECHO "*** The inter-library dependencies that have been dropped here will be"
-	    $ECHO "*** automatically added whenever a program is linked with this library"
-	    $ECHO "*** or is declared to -dlopen it."
-
-	    if test "$allow_undefined" = no; then
-	      $ECHO
-	      $ECHO "*** Since this library must not contain undefined symbols,"
-	      $ECHO "*** because either the platform does not support them or"
-	      $ECHO "*** it was explicitly requested with -no-undefined,"
-	      $ECHO "*** libtool will only create a static version of it."
-	      if test "$build_old_libs" = no; then
-		oldlibs="$output_objdir/$libname.$libext"
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  fi
-	fi
-	# Done checking deplibs!
-	deplibs=$newdeplibs
-      fi
-      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
-      case $host in
-	*-*-darwin*)
-	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  ;;
-      esac
-
-      # move library search paths that coincide with paths to not yet
-      # installed libraries to the beginning of the library search list
-      new_libs=
-      for path in $notinst_path; do
-	case " $new_libs " in
-	*" -L$path/$objdir "*) ;;
-	*)
-	  case " $deplibs " in
-	  *" -L$path/$objdir "*)
-	    new_libs="$new_libs -L$path/$objdir" ;;
-	  esac
-	  ;;
-	esac
-      done
-      for deplib in $deplibs; do
-	case $deplib in
-	-L*)
-	  case " $new_libs " in
-	  *" $deplib "*) ;;
-	  *) new_libs="$new_libs $deplib" ;;
-	  esac
-	  ;;
-	*) new_libs="$new_libs $deplib" ;;
-	esac
-      done
-      deplibs="$new_libs"
-
-      # All the library-specific variables (install_libdir is set above).
-      library_names=
-      old_library=
-      dlname=
-
-      # Test again, we may have decided not to build it any more
-      if test "$build_libtool_libs" = yes; then
-	if test "$hardcode_into_libs" = yes; then
-	  # Hardcode the library paths
-	  hardcode_libdirs=
-	  dep_rpath=
-	  rpath="$finalize_rpath"
-	  test "$mode" != relink && rpath="$compile_rpath$rpath"
-	  for libdir in $rpath; do
-	    if test -n "$hardcode_libdir_flag_spec"; then
-	      if test -n "$hardcode_libdir_separator"; then
-		if test -z "$hardcode_libdirs"; then
-		  hardcode_libdirs="$libdir"
-		else
-		  # Just accumulate the unique libdirs.
-		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		    ;;
-		  *)
-		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		    ;;
-		  esac
-		fi
-	      else
-		eval flag=\"$hardcode_libdir_flag_spec\"
-		dep_rpath="$dep_rpath $flag"
-	      fi
-	    elif test -n "$runpath_var"; then
-	      case "$perm_rpath " in
-	      *" $libdir "*) ;;
-	      *) perm_rpath="$perm_rpath $libdir" ;;
-	      esac
-	    fi
-	  done
-	  # Substitute the hardcoded libdirs into the rpath.
-	  if test -n "$hardcode_libdir_separator" &&
-	     test -n "$hardcode_libdirs"; then
-	    libdir="$hardcode_libdirs"
-	    if test -n "$hardcode_libdir_flag_spec_ld"; then
-	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
-	    else
-	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
-	    fi
-	  fi
-	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
-	    # We should set the runpath_var.
-	    rpath=
-	    for dir in $perm_rpath; do
-	      rpath="$rpath$dir:"
-	    done
-	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
-	  fi
-	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
-	fi
-
-	shlibpath="$finalize_shlibpath"
-	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
-	if test -n "$shlibpath"; then
-	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
-	fi
-
-	# Get the real and link names of the library.
-	eval shared_ext=\"$shrext_cmds\"
-	eval library_names=\"$library_names_spec\"
-	set dummy $library_names
-	shift
-	realname="$1"
-	shift
-
-	if test -n "$soname_spec"; then
-	  eval soname=\"$soname_spec\"
-	else
-	  soname="$realname"
-	fi
-	if test -z "$dlname"; then
-	  dlname=$soname
-	fi
-
-	lib="$output_objdir/$realname"
-	linknames=
-	for link
-	do
-	  linknames="$linknames $link"
-	done
-
-	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	test "X$libobjs" = "X " && libobjs=
-
-	delfiles=
-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
-	  export_symbols="$output_objdir/$libname.uexp"
-	  delfiles="$delfiles $export_symbols"
-	fi
-
-	orig_export_symbols=
-	case $host_os in
-	cygwin* | mingw* | cegcc*)
-	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
-	    # exporting using user supplied symfile
-	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
-	      # and it's NOT already a .def file. Must figure out
-	      # which of the given symbols are data symbols and tag
-	      # them as such. So, trigger use of export_symbols_cmds.
-	      # export_symbols gets reassigned inside the "prepare
-	      # the list of exported symbols" if statement, so the
-	      # include_expsyms logic still works.
-	      orig_export_symbols="$export_symbols"
-	      export_symbols=
-	      always_export_symbols=yes
-	    fi
-	  fi
-	  ;;
-	esac
-
-	# Prepare the list of exported symbols
-	if test -z "$export_symbols"; then
-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    func_verbose "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $opt_dry_run || $RM $export_symbols
-	    cmds=$export_symbols_cmds
-	    save_ifs="$IFS"; IFS='~'
-	    for cmd in $cmds; do
-	      IFS="$save_ifs"
-	      eval cmd=\"$cmd\"
-	      func_len " $cmd"
-	      len=$func_len_result
-	      if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-		func_show_eval "$cmd" 'exit $?'
-		skipped_export=false
-	      else
-		# The command line is too long to execute in one step.
-		func_verbose "using reloadable object file for export list..."
-		skipped_export=:
-		# Break out early, otherwise skipped_export may be
-		# set to false by a later but shorter cmd.
-		break
-	      fi
-	    done
-	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
-	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
-	    fi
-	  fi
-	fi
-
-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  tmp_export_symbols="$export_symbols"
-	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	  $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
-	fi
-
-	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
-	  # The given exports_symbols file has to be filtered, so filter it.
-	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
-	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
-	  # 's' commands which not all seds can handle. GNU sed should be fine
-	  # though. Also, the filter scales superlinearly with the number of
-	  # global variables. join(1) would be nice here, but unfortunately
-	  # isn't a blessed tool.
-	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-	  delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
-	  export_symbols=$output_objdir/$libname.def
-	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
-	fi
-
-	tmp_deplibs=
-	for test_deplib in $deplibs; do
-	  case " $convenience " in
-	  *" $test_deplib "*) ;;
-	  *)
-	    tmp_deplibs="$tmp_deplibs $test_deplib"
-	    ;;
-	  esac
-	done
-	deplibs="$tmp_deplibs"
-
-	if test -n "$convenience"; then
-	  if test -n "$whole_archive_flag_spec" &&
-	    test "$compiler_needs_object" = yes &&
-	    test -z "$libobjs"; then
-	    # extract the archives, so we have objects to list.
-	    # TODO: could optimize this to just extract one archive.
-	    whole_archive_flag_spec=
-	  fi
-	  if test -n "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	    test "X$libobjs" = "X " && libobjs=
-	  else
-	    gentop="$output_objdir/${outputname}x"
-	    generated="$generated $gentop"
-
-	    func_extract_archives $gentop $convenience
-	    libobjs="$libobjs $func_extract_archives_result"
-	    test "X$libobjs" = "X " && libobjs=
-	  fi
-	fi
-
-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-	  eval flag=\"$thread_safe_flag_spec\"
-	  linker_flags="$linker_flags $flag"
-	fi
-
-	# Make a backup of the uninstalled library when relinking
-	if test "$mode" = relink; then
-	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
-	fi
-
-	# Do each of the archive commands.
-	if test "$module" = yes && test -n "$module_cmds" ; then
-	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-	    eval test_cmds=\"$module_expsym_cmds\"
-	    cmds=$module_expsym_cmds
-	  else
-	    eval test_cmds=\"$module_cmds\"
-	    cmds=$module_cmds
-	  fi
-	else
-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	    eval test_cmds=\"$archive_expsym_cmds\"
-	    cmds=$archive_expsym_cmds
-	  else
-	    eval test_cmds=\"$archive_cmds\"
-	    cmds=$archive_cmds
-	  fi
-	fi
-
-	if test "X$skipped_export" != "X:" &&
-	   func_len " $test_cmds" &&
-	   len=$func_len_result &&
-	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  :
-	else
-	  # The command line is too long to link in one step, link piecewise
-	  # or, if using GNU ld and skipped_export is not :, use a linker
-	  # script.
-
-	  # Save the value of $output and $libobjs because we want to
-	  # use them later.  If we have whole_archive_flag_spec, we
-	  # want to use save_libobjs as it was before
-	  # whole_archive_flag_spec was expanded, because we can't
-	  # assume the linker understands whole_archive_flag_spec.
-	  # This may have to be revisited, in case too many
-	  # convenience libraries get linked in and end up exceeding
-	  # the spec.
-	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	  fi
-	  save_output=$output
-	  output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
-
-	  # Clear the reloadable object creation command queue and
-	  # initialize k to one.
-	  test_cmds=
-	  concat_cmds=
-	  objlist=
-	  last_robj=
-	  k=1
-
-	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
-	    output=${output_objdir}/${output_la}.lnkscript
-	    func_verbose "creating GNU ld script: $output"
-	    $ECHO 'INPUT (' > $output
-	    for obj in $save_libobjs
-	    do
-	      $ECHO "$obj" >> $output
-	    done
-	    $ECHO ')' >> $output
-	    delfiles="$delfiles $output"
-	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
-	    output=${output_objdir}/${output_la}.lnk
-	    func_verbose "creating linker input file list: $output"
-	    : > $output
-	    set x $save_libobjs
-	    shift
-	    firstobj=
-	    if test "$compiler_needs_object" = yes; then
-	      firstobj="$1 "
-	      shift
-	    fi
-	    for obj
-	    do
-	      $ECHO "$obj" >> $output
-	    done
-	    delfiles="$delfiles $output"
-	    output=$firstobj\"$file_list_spec$output\"
-	  else
-	    if test -n "$save_libobjs"; then
-	      func_verbose "creating reloadable object files..."
-	      output=$output_objdir/$output_la-${k}.$objext
-	      eval test_cmds=\"$reload_cmds\"
-	      func_len " $test_cmds"
-	      len0=$func_len_result
-	      len=$len0
-
-	      # Loop over the list of objects to be linked.
-	      for obj in $save_libobjs
-	      do
-		func_len " $obj"
-		func_arith $len + $func_len_result
-		len=$func_arith_result
-		if test "X$objlist" = X ||
-		   test "$len" -lt "$max_cmd_len"; then
-		  func_append objlist " $obj"
-		else
-		  # The command $test_cmds is almost too long, add a
-		  # command to the queue.
-		  if test "$k" -eq 1 ; then
-		    # The first file doesn't have a previous command to add.
-		    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
-		  else
-		    # All subsequent reloadable object files will link in
-		    # the last one created.
-		    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
-		  fi
-		  last_robj=$output_objdir/$output_la-${k}.$objext
-		  func_arith $k + 1
-		  k=$func_arith_result
-		  output=$output_objdir/$output_la-${k}.$objext
-		  objlist=$obj
-		  func_len " $last_robj"
-		  func_arith $len0 + $func_len_result
-		  len=$func_arith_result
-		fi
-	      done
-	      # Handle the remaining objects by creating one last
-	      # reloadable object file.  All subsequent reloadable object
-	      # files will link in the last one created.
-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-	      if test -n "$last_robj"; then
-	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
-	      fi
-	      delfiles="$delfiles $output"
-
-	    else
-	      output=
-	    fi
-
-	    if ${skipped_export-false}; then
-	      func_verbose "generating symbol list for \`$libname.la'"
-	      export_symbols="$output_objdir/$libname.exp"
-	      $opt_dry_run || $RM $export_symbols
-	      libobjs=$output
-	      # Append the command to create the export file.
-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
-	      if test -n "$last_robj"; then
-		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
-	      fi
-	    fi
-
-	    test -n "$save_libobjs" &&
-	      func_verbose "creating a temporary reloadable object file: $output"
-
-	    # Loop through the commands generated above and execute them.
-	    save_ifs="$IFS"; IFS='~'
-	    for cmd in $concat_cmds; do
-	      IFS="$save_ifs"
-	      $opt_silent || {
-		  func_quote_for_expand "$cmd"
-		  eval "func_echo $func_quote_for_expand_result"
-	      }
-	      $opt_dry_run || eval "$cmd" || {
-		lt_exit=$?
-
-		# Restore the uninstalled library and exit
-		if test "$mode" = relink; then
-		  ( cd "$output_objdir" && \
-		    $RM "${realname}T" && \
-		    $MV "${realname}U" "$realname" )
-		fi
-
-		exit $lt_exit
-	      }
-	    done
-	    IFS="$save_ifs"
-
-	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
-	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
-	    fi
-	  fi
-
-          if ${skipped_export-false}; then
-	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	      tmp_export_symbols="$export_symbols"
-	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	      $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
-	    fi
-
-	    if test -n "$orig_export_symbols"; then
-	      # The given exports_symbols file has to be filtered, so filter it.
-	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
-	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
-	      # 's' commands which not all seds can handle. GNU sed should be fine
-	      # though. Also, the filter scales superlinearly with the number of
-	      # global variables. join(1) would be nice here, but unfortunately
-	      # isn't a blessed tool.
-	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-	      delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
-	      export_symbols=$output_objdir/$libname.def
-	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
-	    fi
-	  fi
-
-	  libobjs=$output
-	  # Restore the value of output.
-	  output=$save_output
-
-	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	    test "X$libobjs" = "X " && libobjs=
-	  fi
-	  # Expand the library linking commands again to reset the
-	  # value of $libobjs for piecewise linking.
-
-	  # Do each of the archive commands.
-	  if test "$module" = yes && test -n "$module_cmds" ; then
-	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-	      cmds=$module_expsym_cmds
-	    else
-	      cmds=$module_cmds
-	    fi
-	  else
-	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	      cmds=$archive_expsym_cmds
-	    else
-	      cmds=$archive_cmds
-	    fi
-	  fi
-	fi
-
-	if test -n "$delfiles"; then
-	  # Append the command to remove temporary files to $cmds.
-	  eval cmds=\"\$cmds~\$RM $delfiles\"
-	fi
-
-	# Add any objects from preloaded convenience libraries
-	if test -n "$dlprefiles"; then
-	  gentop="$output_objdir/${outputname}x"
-	  generated="$generated $gentop"
-
-	  func_extract_archives $gentop $dlprefiles
-	  libobjs="$libobjs $func_extract_archives_result"
-	  test "X$libobjs" = "X " && libobjs=
-	fi
-
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  eval cmd=\"$cmd\"
-	  $opt_silent || {
-	    func_quote_for_expand "$cmd"
-	    eval "func_echo $func_quote_for_expand_result"
-	  }
-	  $opt_dry_run || eval "$cmd" || {
-	    lt_exit=$?
-
-	    # Restore the uninstalled library and exit
-	    if test "$mode" = relink; then
-	      ( cd "$output_objdir" && \
-	        $RM "${realname}T" && \
-		$MV "${realname}U" "$realname" )
-	    fi
-
-	    exit $lt_exit
-	  }
-	done
-	IFS="$save_ifs"
-
-	# Restore the uninstalled library and exit
-	if test "$mode" = relink; then
-	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
-
-	  if test -n "$convenience"; then
-	    if test -z "$whole_archive_flag_spec"; then
-	      func_show_eval '${RM}r "$gentop"'
-	    fi
-	  fi
-
-	  exit $EXIT_SUCCESS
-	fi
-
-	# Create links to the real library.
-	for linkname in $linknames; do
-	  if test "$realname" != "$linkname"; then
-	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
-	  fi
-	done
-
-	# If -module or -export-dynamic was specified, set the dlname.
-	if test "$module" = yes || test "$export_dynamic" = yes; then
-	  # On all known operating systems, these are identical.
-	  dlname="$soname"
-	fi
-      fi
-      ;;
-
-    obj)
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	func_warning "\`-dlopen' is ignored for objects"
-      fi
-
-      case " $deplibs" in
-      *\ -l* | *\ -L*)
-	func_warning "\`-l' and \`-L' are ignored for objects" ;;
-      esac
-
-      test -n "$rpath" && \
-	func_warning "\`-rpath' is ignored for objects"
-
-      test -n "$xrpath" && \
-	func_warning "\`-R' is ignored for objects"
-
-      test -n "$vinfo" && \
-	func_warning "\`-version-info' is ignored for objects"
-
-      test -n "$release" && \
-	func_warning "\`-release' is ignored for objects"
-
-      case $output in
-      *.lo)
-	test -n "$objs$old_deplibs" && \
-	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
-
-	libobj=$output
-	func_lo2o "$libobj"
-	obj=$func_lo2o_result
-	;;
-      *)
-	libobj=
-	obj="$output"
-	;;
-      esac
-
-      # Delete the old objects.
-      $opt_dry_run || $RM $obj $libobj
-
-      # Objects from convenience libraries.  This assumes
-      # single-version convenience libraries.  Whenever we create
-      # different ones for PIC/non-PIC, this we'll have to duplicate
-      # the extraction.
-      reload_conv_objs=
-      gentop=
-      # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec and hope we can get by with
-      # turning comma into space..
-      wl=
-
-      if test -n "$convenience"; then
-	if test -n "$whole_archive_flag_spec"; then
-	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-	  reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
-	else
-	  gentop="$output_objdir/${obj}x"
-	  generated="$generated $gentop"
-
-	  func_extract_archives $gentop $convenience
-	  reload_conv_objs="$reload_objs $func_extract_archives_result"
-	fi
-      fi
-
-      # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
-      output="$obj"
-      func_execute_cmds "$reload_cmds" 'exit $?'
-
-      # Exit if we aren't doing a library object file.
-      if test -z "$libobj"; then
-	if test -n "$gentop"; then
-	  func_show_eval '${RM}r "$gentop"'
-	fi
-
-	exit $EXIT_SUCCESS
-      fi
-
-      if test "$build_libtool_libs" != yes; then
-	if test -n "$gentop"; then
-	  func_show_eval '${RM}r "$gentop"'
-	fi
-
-	# Create an invalid libtool object if no PIC, so that we don't
-	# accidentally link it into a program.
-	# $show "echo timestamp > $libobj"
-	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
-	exit $EXIT_SUCCESS
-      fi
-
-      if test -n "$pic_flag" || test "$pic_mode" != default; then
-	# Only do commands if we really have different PIC objects.
-	reload_objs="$libobjs $reload_conv_objs"
-	output="$libobj"
-	func_execute_cmds "$reload_cmds" 'exit $?'
-      fi
-
-      if test -n "$gentop"; then
-	func_show_eval '${RM}r "$gentop"'
-      fi
-
-      exit $EXIT_SUCCESS
-      ;;
-
-    prog)
-      case $host in
-	*cygwin*) func_stripname '' '.exe' "$output"
-	          output=$func_stripname_result.exe;;
-      esac
-      test -n "$vinfo" && \
-	func_warning "\`-version-info' is ignored for programs"
-
-      test -n "$release" && \
-	func_warning "\`-release' is ignored for programs"
-
-      test "$preload" = yes \
-        && test "$dlopen_support" = unknown \
-	&& test "$dlopen_self" = unknown \
-	&& test "$dlopen_self_static" = unknown && \
-	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
-
-      case $host in
-      *-*-rhapsody* | *-*-darwin1.[012])
-	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
-	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
-	;;
-      esac
-
-      case $host in
-      *-*-darwin*)
-	# Don't allow lazy linking, it breaks C++ global constructors
-	# But is supposedly fixed on 10.4 or later (yay!).
-	if test "$tagname" = CXX ; then
-	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
-	    10.[0123])
-	      compile_command="$compile_command ${wl}-bind_at_load"
-	      finalize_command="$finalize_command ${wl}-bind_at_load"
-	    ;;
-	  esac
-	fi
-	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
-	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	;;
-      esac
-
-
-      # move library search paths that coincide with paths to not yet
-      # installed libraries to the beginning of the library search list
-      new_libs=
-      for path in $notinst_path; do
-	case " $new_libs " in
-	*" -L$path/$objdir "*) ;;
-	*)
-	  case " $compile_deplibs " in
-	  *" -L$path/$objdir "*)
-	    new_libs="$new_libs -L$path/$objdir" ;;
-	  esac
-	  ;;
-	esac
-      done
-      for deplib in $compile_deplibs; do
-	case $deplib in
-	-L*)
-	  case " $new_libs " in
-	  *" $deplib "*) ;;
-	  *) new_libs="$new_libs $deplib" ;;
-	  esac
-	  ;;
-	*) new_libs="$new_libs $deplib" ;;
-	esac
-      done
-      compile_deplibs="$new_libs"
-
-
-      compile_command="$compile_command $compile_deplibs"
-      finalize_command="$finalize_command $finalize_deplibs"
-
-      if test -n "$rpath$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	for libdir in $rpath $xrpath; do
-	  # This is the magic to use -rpath.
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-      fi
-
-      # Now hardcode the library paths
-      rpath=
-      hardcode_libdirs=
-      for libdir in $compile_rpath $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) perm_rpath="$perm_rpath $libdir" ;;
-	  esac
-	fi
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
-	  case :$dllsearchpath: in
-	  *":$libdir:"*) ;;
-	  ::) dllsearchpath=$libdir;;
-	  *) dllsearchpath="$dllsearchpath:$libdir";;
-	  esac
-	  case :$dllsearchpath: in
-	  *":$testbindir:"*) ;;
-	  ::) dllsearchpath=$testbindir;;
-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
-	  esac
-	  ;;
-	esac
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      compile_rpath="$rpath"
-
-      rpath=
-      hardcode_libdirs=
-      for libdir in $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$finalize_perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
-	  esac
-	fi
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      finalize_rpath="$rpath"
-
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
-	# Transform all the library objects into standard objects.
-	compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-      fi
-
-      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
-
-      # template prelinking step
-      if test -n "$prelink_cmds"; then
-	func_execute_cmds "$prelink_cmds" 'exit $?'
-      fi
-
-      wrappers_required=yes
-      case $host in
-      *cygwin* | *mingw* )
-        if test "$build_libtool_libs" != yes; then
-          wrappers_required=no
-        fi
-        ;;
-      *cegcc)
-        # Disable wrappers for cegcc, we are cross compiling anyway.
-        wrappers_required=no
-        ;;
-      *)
-        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
-          wrappers_required=no
-        fi
-        ;;
-      esac
-      if test "$wrappers_required" = no; then
-	# Replace the output file specification.
-	compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	link_command="$compile_command$compile_rpath"
-
-	# We have no uninstalled library dependencies, so finalize right now.
-	exit_status=0
-	func_show_eval "$link_command" 'exit_status=$?'
-
-	# Delete the generated files.
-	if test -f "$output_objdir/${outputname}S.${objext}"; then
-	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
-	fi
-
-	exit $exit_status
-      fi
-
-      if test -n "$compile_shlibpath$finalize_shlibpath"; then
-	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
-      fi
-      if test -n "$finalize_shlibpath"; then
-	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-      fi
-
-      compile_var=
-      finalize_var=
-      if test -n "$runpath_var"; then
-	if test -n "$perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-	if test -n "$finalize_perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $finalize_perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-      fi
-
-      if test "$no_install" = yes; then
-	# We don't need to create a wrapper script.
-	link_command="$compile_var$compile_command$compile_rpath"
-	# Replace the output file specification.
-	link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	# Delete the old output file.
-	$opt_dry_run || $RM $output
-	# Link the executable and exit
-	func_show_eval "$link_command" 'exit $?'
-	exit $EXIT_SUCCESS
-      fi
-
-      if test "$hardcode_action" = relink; then
-	# Fast installation is not supported
-	link_command="$compile_var$compile_command$compile_rpath"
-	relink_command="$finalize_var$finalize_command$finalize_rpath"
-
-	func_warning "this platform does not like uninstalled shared libraries"
-	func_warning "\`$output' will be relinked during installation"
-      else
-	if test "$fast_install" != no; then
-	  link_command="$finalize_var$compile_command$finalize_rpath"
-	  if test "$fast_install" = yes; then
-	    relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
-	  else
-	    # fast_install is set to needless
-	    relink_command=
-	  fi
-	else
-	  link_command="$compile_var$compile_command$compile_rpath"
-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
-	fi
-      fi
-
-      # Replace the output file specification.
-      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
-      # Delete the old output files.
-      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
-      func_show_eval "$link_command" 'exit $?'
-
-      # Now create the wrapper script.
-      func_verbose "creating $output"
-
-      # Quote the relink command for shipping.
-      if test -n "$relink_command"; then
-	# Preserve any variables that may affect compiler behavior
-	for var in $variables_saved_for_relink; do
-	  if eval test -z \"\${$var+set}\"; then
-	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
-	  elif eval var_value=\$$var; test -z "$var_value"; then
-	    relink_command="$var=; export $var; $relink_command"
-	  else
-	    func_quote_for_eval "$var_value"
-	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
-	  fi
-	done
-	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Quote $ECHO for shipping.
-      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
-	case $progpath in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
-	esac
-	qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
-      else
-	qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Only actually do things if not in dry run mode.
-      $opt_dry_run || {
-	# win32 will think the script is a binary if it has
-	# a .exe suffix, so we strip it off here.
-	case $output in
-	  *.exe) func_stripname '' '.exe' "$output"
-	         output=$func_stripname_result ;;
-	esac
-	# test for cygwin because mv fails w/o .exe extensions
-	case $host in
-	  *cygwin*)
-	    exeext=.exe
-	    func_stripname '' '.exe' "$outputname"
-	    outputname=$func_stripname_result ;;
-	  *) exeext= ;;
-	esac
-	case $host in
-	  *cygwin* | *mingw* )
-	    func_dirname_and_basename "$output" "" "."
-	    output_name=$func_basename_result
-	    output_path=$func_dirname_result
-	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
-	    cwrapper="$output_path/$output_name.exe"
-	    $RM $cwrappersource $cwrapper
-	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
-	    func_emit_cwrapperexe_src > $cwrappersource
-
-	    # The wrapper executable is built using the $host compiler,
-	    # because it contains $host paths and files. If cross-
-	    # compiling, it, like the target executable, must be
-	    # executed on the $host or under an emulation environment.
-	    $opt_dry_run || {
-	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
-	      $STRIP $cwrapper
-	    }
-
-	    # Now, create the wrapper script for func_source use:
-	    func_ltwrapper_scriptname $cwrapper
-	    $RM $func_ltwrapper_scriptname_result
-	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
-	    $opt_dry_run || {
-	      # note: this script will not be executed, so do not chmod.
-	      if test "x$build" = "x$host" ; then
-		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
-	      else
-		func_emit_wrapper no > $func_ltwrapper_scriptname_result
-	      fi
-	    }
-	  ;;
-	  * )
-	    $RM $output
-	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
-
-	    func_emit_wrapper no > $output
-	    chmod +x $output
-	  ;;
-	esac
-      }
-      exit $EXIT_SUCCESS
-      ;;
-    esac
-
-    # See if we need to build an old-fashioned archive.
-    for oldlib in $oldlibs; do
-
-      if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save $symfileobj"
-	addlibs="$convenience"
-	build_libtool_libs=no
-      else
-	if test "$build_libtool_libs" = module; then
-	  oldobjs="$libobjs_save"
-	  build_libtool_libs=no
-	else
-	  oldobjs="$old_deplibs $non_pic_objects"
-	  if test "$preload" = yes && test -f "$symfileobj"; then
-	    oldobjs="$oldobjs $symfileobj"
-	  fi
-	fi
-	addlibs="$old_convenience"
-      fi
-
-      if test -n "$addlibs"; then
-	gentop="$output_objdir/${outputname}x"
-	generated="$generated $gentop"
-
-	func_extract_archives $gentop $addlibs
-	oldobjs="$oldobjs $func_extract_archives_result"
-      fi
-
-      # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-	cmds=$old_archive_from_new_cmds
-      else
-
-	# Add any objects from preloaded convenience libraries
-	if test -n "$dlprefiles"; then
-	  gentop="$output_objdir/${outputname}x"
-	  generated="$generated $gentop"
-
-	  func_extract_archives $gentop $dlprefiles
-	  oldobjs="$oldobjs $func_extract_archives_result"
-	fi
-
-	# POSIX demands no paths to be encoded in archives.  We have
-	# to avoid creating archives with duplicate basenames if we
-	# might have to extract them afterwards, e.g., when creating a
-	# static archive out of a convenience library, or when linking
-	# the entirety of a libtool archive into another (currently
-	# not supported by libtool).
-	if (for obj in $oldobjs
-	    do
-	      func_basename "$obj"
-	      $ECHO "$func_basename_result"
-	    done | sort | sort -uc >/dev/null 2>&1); then
-	  :
-	else
-	  $ECHO "copying selected object files to avoid basename conflicts..."
-	  gentop="$output_objdir/${outputname}x"
-	  generated="$generated $gentop"
-	  func_mkdir_p "$gentop"
-	  save_oldobjs=$oldobjs
-	  oldobjs=
-	  counter=1
-	  for obj in $save_oldobjs
-	  do
-	    func_basename "$obj"
-	    objbase="$func_basename_result"
-	    case " $oldobjs " in
-	    " ") oldobjs=$obj ;;
-	    *[\ /]"$objbase "*)
-	      while :; do
-		# Make sure we don't pick an alternate name that also
-		# overlaps.
-		newobj=lt$counter-$objbase
-		func_arith $counter + 1
-		counter=$func_arith_result
-		case " $oldobjs " in
-		*[\ /]"$newobj "*) ;;
-		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
-		esac
-	      done
-	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-	      oldobjs="$oldobjs $gentop/$newobj"
-	      ;;
-	    *) oldobjs="$oldobjs $obj" ;;
-	    esac
-	  done
-	fi
-	eval cmds=\"$old_archive_cmds\"
-
-	func_len " $cmds"
-	len=$func_len_result
-	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  cmds=$old_archive_cmds
-	else
-	  # the command line is too long to link in one step, link in parts
-	  func_verbose "using piecewise archive linking..."
-	  save_RANLIB=$RANLIB
-	  RANLIB=:
-	  objlist=
-	  concat_cmds=
-	  save_oldobjs=$oldobjs
-	  oldobjs=
-	  # Is there a better way of finding the last object in the list?
-	  for obj in $save_oldobjs
-	  do
-	    last_oldobj=$obj
-	  done
-	  eval test_cmds=\"$old_archive_cmds\"
-	  func_len " $test_cmds"
-	  len0=$func_len_result
-	  len=$len0
-	  for obj in $save_oldobjs
-	  do
-	    func_len " $obj"
-	    func_arith $len + $func_len_result
-	    len=$func_arith_result
-	    func_append objlist " $obj"
-	    if test "$len" -lt "$max_cmd_len"; then
-	      :
-	    else
-	      # the above command should be used before it gets too long
-	      oldobjs=$objlist
-	      if test "$obj" = "$last_oldobj" ; then
-		RANLIB=$save_RANLIB
-	      fi
-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
-	      objlist=
-	      len=$len0
-	    fi
-	  done
-	  RANLIB=$save_RANLIB
-	  oldobjs=$objlist
-	  if test "X$oldobjs" = "X" ; then
-	    eval cmds=\"\$concat_cmds\"
-	  else
-	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
-	  fi
-	fi
-      fi
-      func_execute_cmds "$cmds" 'exit $?'
-    done
-
-    test -n "$generated" && \
-      func_show_eval "${RM}r$generated"
-
-    # Now create the libtool archive.
-    case $output in
-    *.la)
-      old_library=
-      test "$build_old_libs" = yes && old_library="$libname.$libext"
-      func_verbose "creating $output"
-
-      # Preserve any variables that may affect compiler behavior
-      for var in $variables_saved_for_relink; do
-	if eval test -z \"\${$var+set}\"; then
-	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
-	elif eval var_value=\$$var; test -z "$var_value"; then
-	  relink_command="$var=; export $var; $relink_command"
-	else
-	  func_quote_for_eval "$var_value"
-	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
-	fi
-      done
-      # Quote the link command for shipping.
-      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-      if test "$hardcode_automatic" = yes ; then
-	relink_command=
-      fi
-
-      # Only create the output if not a dry run.
-      $opt_dry_run || {
-	for installed in no yes; do
-	  if test "$installed" = yes; then
-	    if test -z "$install_libdir"; then
-	      break
-	    fi
-	    output="$output_objdir/$outputname"i
-	    # Replace all uninstalled libtool libraries with the installed ones
-	    newdependency_libs=
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      *.la)
-		func_basename "$deplib"
-		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		test -z "$libdir" && \
-		  func_fatal_error "\`$deplib' is not a valid libtool archive"
-		newdependency_libs="$newdependency_libs $libdir/$name"
-		;;
-	      *) newdependency_libs="$newdependency_libs $deplib" ;;
-	      esac
-	    done
-	    dependency_libs="$newdependency_libs"
-	    newdlfiles=
-
-	    for lib in $dlfiles; do
-	      case $lib in
-	      *.la)
-	        func_basename "$lib"
-		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-		test -z "$libdir" && \
-		  func_fatal_error "\`$lib' is not a valid libtool archive"
-		newdlfiles="$newdlfiles $libdir/$name"
-		;;
-	      *) newdlfiles="$newdlfiles $lib" ;;
-	      esac
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      case $lib in
-	      *.la)
-		# Only pass preopened files to the pseudo-archive (for
-		# eventual linking with the app. that links it) if we
-		# didn't already link the preopened objects directly into
-		# the library:
-		func_basename "$lib"
-		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-		test -z "$libdir" && \
-		  func_fatal_error "\`$lib' is not a valid libtool archive"
-		newdlprefiles="$newdlprefiles $libdir/$name"
-		;;
-	      esac
-	    done
-	    dlprefiles="$newdlprefiles"
-	  else
-	    newdlfiles=
-	    for lib in $dlfiles; do
-	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-		*) abs=`pwd`"/$lib" ;;
-	      esac
-	      newdlfiles="$newdlfiles $abs"
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-		*) abs=`pwd`"/$lib" ;;
-	      esac
-	      newdlprefiles="$newdlprefiles $abs"
-	    done
-	    dlprefiles="$newdlprefiles"
-	  fi
-	  $RM $output
-	  # place dlname in correct position for cygwin
-	  tdlname=$dlname
-	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
-	  esac
-	  $ECHO > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Linker flags that can not go in dependency_libs.
-inherited_linker_flags='$new_inherited_linker_flags'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Names of additional weak libraries provided by this library
-weak_library_names='$weak_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
-	  if test "$installed" = no && test "$need_relink" = yes; then
-	    $ECHO >> $output "\
-relink_command=\"$relink_command\""
-	  fi
-	done
-      }
-
-      # Do a symbolic link so that the libtool archive can be found in
-      # LD_LIBRARY_PATH before the program is installed.
-      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
-      ;;
-    esac
-    exit $EXIT_SUCCESS
-}
-
-{ test "$mode" = link || test "$mode" = relink; } &&
-    func_mode_link ${1+"$@"}
-
-
-# func_mode_uninstall arg...
-func_mode_uninstall ()
-{
-    $opt_debug
-    RM="$nonopt"
-    files=
-    rmforce=
-    exit_status=0
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    for arg
-    do
-      case $arg in
-      -f) RM="$RM $arg"; rmforce=yes ;;
-      -*) RM="$RM $arg" ;;
-      *) files="$files $arg" ;;
-      esac
-    done
-
-    test -z "$RM" && \
-      func_fatal_help "you must specify an RM program"
-
-    rmdirs=
-
-    origobjdir="$objdir"
-    for file in $files; do
-      func_dirname "$file" "" "."
-      dir="$func_dirname_result"
-      if test "X$dir" = X.; then
-	objdir="$origobjdir"
-      else
-	objdir="$dir/$origobjdir"
-      fi
-      func_basename "$file"
-      name="$func_basename_result"
-      test "$mode" = uninstall && objdir="$dir"
-
-      # Remember objdir for removal later, being careful to avoid duplicates
-      if test "$mode" = clean; then
-	case " $rmdirs " in
-	  *" $objdir "*) ;;
-	  *) rmdirs="$rmdirs $objdir" ;;
-	esac
-      fi
-
-      # Don't error if the file doesn't exist and rm -f was used.
-      if { test -L "$file"; } >/dev/null 2>&1 ||
-	 { test -h "$file"; } >/dev/null 2>&1 ||
-	 test -f "$file"; then
-	:
-      elif test -d "$file"; then
-	exit_status=1
-	continue
-      elif test "$rmforce" = yes; then
-	continue
-      fi
-
-      rmfiles="$file"
-
-      case $name in
-      *.la)
-	# Possibly a libtool archive, so verify it.
-	if func_lalib_p "$file"; then
-	  func_source $dir/$name
-
-	  # Delete the libtool libraries and symlinks.
-	  for n in $library_names; do
-	    rmfiles="$rmfiles $objdir/$n"
-	  done
-	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-
-	  case "$mode" in
-	  clean)
-	    case "  $library_names " in
-	    # "  " in the beginning catches empty $dlname
-	    *" $dlname "*) ;;
-	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
-	    esac
-	    test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
-	    ;;
-	  uninstall)
-	    if test -n "$library_names"; then
-	      # Do each command in the postuninstall commands.
-	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
-	    fi
-
-	    if test -n "$old_library"; then
-	      # Do each command in the old_postuninstall commands.
-	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
-	    fi
-	    # FIXME: should reinstall the best remaining shared library.
-	    ;;
-	  esac
-	fi
-	;;
-
-      *.lo)
-	# Possibly a libtool object, so verify it.
-	if func_lalib_p "$file"; then
-
-	  # Read the .lo file
-	  func_source $dir/$name
-
-	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" &&
-	     test "$pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$pic_object"
-	  fi
-
-	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" &&
-	     test "$non_pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$non_pic_object"
-	  fi
-	fi
-	;;
-
-      *)
-	if test "$mode" = clean ; then
-	  noexename=$name
-	  case $file in
-	  *.exe)
-	    func_stripname '' '.exe' "$file"
-	    file=$func_stripname_result
-	    func_stripname '' '.exe' "$name"
-	    noexename=$func_stripname_result
-	    # $file with .exe has already been added to rmfiles,
-	    # add $file without .exe
-	    rmfiles="$rmfiles $file"
-	    ;;
-	  esac
-	  # Do a test to see if this is a libtool program.
-	  if func_ltwrapper_p "$file"; then
-	    if func_ltwrapper_executable_p "$file"; then
-	      func_ltwrapper_scriptname "$file"
-	      relink_command=
-	      func_source $func_ltwrapper_scriptname_result
-	      rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
-	    else
-	      relink_command=
-	      func_source $dir/$noexename
-	    fi
-
-	    # note $name still contains .exe if it was in $file originally
-	    # as does the version of $file that was added into $rmfiles
-	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
-	    if test "$fast_install" = yes && test -n "$relink_command"; then
-	      rmfiles="$rmfiles $objdir/lt-$name"
-	    fi
-	    if test "X$noexename" != "X$name" ; then
-	      rmfiles="$rmfiles $objdir/lt-${noexename}.c"
-	    fi
-	  fi
-	fi
-	;;
-      esac
-      func_show_eval "$RM $rmfiles" 'exit_status=1'
-    done
-    objdir="$origobjdir"
-
-    # Try to remove the ${objdir}s in the directories where we deleted files
-    for dir in $rmdirs; do
-      if test -d "$dir"; then
-	func_show_eval "rmdir $dir >/dev/null 2>&1"
-      fi
-    done
-
-    exit $exit_status
-}
-
-{ test "$mode" = uninstall || test "$mode" = clean; } &&
-    func_mode_uninstall ${1+"$@"}
-
-test -z "$mode" && {
-  help="$generic_help"
-  func_fatal_help "you must specify a MODE"
-}
-
-test -z "$exec_cmd" && \
-  func_fatal_help "invalid operation mode \`$mode'"
-
-if test -n "$exec_cmd"; then
-  eval exec "$exec_cmd"
-  exit $EXIT_FAILURE
-fi
-
-exit $exit_status
-
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries.  Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them.  This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration.  But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
-# vi:sw=2
-