diff options
Diffstat (limited to 'INSTALL')
| -rw-r--r-- | INSTALL | 365 |
1 files changed, 365 insertions, 0 deletions
diff --git a/INSTALL b/INSTALL new file mode 100644 index 00000000..7d1c323b --- /dev/null +++ b/INSTALL @@ -0,0 +1,365 @@ +Installation Instructions +************************* + +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, +2006, 2007, 2008, 2009 Free Software Foundation, Inc. + + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. + +Basic Installation +================== + + Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. Caching is +disabled by default to prevent problems with accidental use of stale +cache files. + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. + + The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. + + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package, generally using the just-built uninstalled binaries. + + 4. Type `make install' to install the programs and any data files and + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. + + 6. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you can use GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. + + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. + + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. + +Installation Names +================== + + By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `<wchar.h>' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + +Specifying the System Type +========================== + + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS + KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). + +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: + + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash + +`configure' Invocation +====================== + + `configure' recognizes the following options to control how it +operates. + +`--help' +`-h' + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + |