removing autogenerated files

1 files changed, 0 insertions, 572 deletions

diff --git a/data/Makefile.in b/data/Makefile.in
deleted file mode 100644
index 025bc46..0000000
--- a/data/Makefile.in
+++ /dev/null
@@ -1,572 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = data
-DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \
-	$(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \
-	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
-	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
-	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo "  GEN   " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
-SOURCES =
-DIST_SOURCES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__installdirs = "$(DESTDIR)$(libmateweatherdtddir)" \
-	"$(DESTDIR)$(libmateweatherlocationsdir)"
-DATA = $(libmateweatherdtd_DATA) $(libmateweatherlocations_DATA)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@
-ALL_LINGUAS = @ALL_LINGUAS@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-COMPRESS_EXT = @COMPRESS_EXT@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIR = @DATADIR@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DISABLE_DEPRECATED = @DISABLE_DEPRECATED@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GLADEDIR = @GLADEDIR@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
-GLIB_LIBS = @GLIB_LIBS@
-GLIB_MKENUMS = @GLIB_MKENUMS@
-GMOFILES = @GMOFILES@
-GMSGFMT = @GMSGFMT@
-GOBJECT_QUERY = @GOBJECT_QUERY@
-GREP = @GREP@
-GTKDOC_CHECK = @GTKDOC_CHECK@
-GTKDOC_MKPDF = @GTKDOC_MKPDF@
-GTKDOC_REBASE = @GTKDOC_REBASE@
-GTK_CFLAGS = @GTK_CFLAGS@
-GTK_LIBS = @GTK_LIBS@
-HTML_DIR = @HTML_DIR@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLLIBS = @INTLLIBS@
-INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
-INTLTOOL_MERGE = @INTLTOOL_MERGE@
-INTLTOOL_PERL = @INTLTOOL_PERL@
-INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBDIR = @LIBDIR@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBSOUP_CFLAGS = @LIBSOUP_CFLAGS@
-LIBSOUP_LIBS = @LIBSOUP_LIBS@
-LIBSOUP_MATE_CFLAGS = @LIBSOUP_MATE_CFLAGS@
-LIBSOUP_MATE_LIBS = @LIBSOUP_MATE_LIBS@
-LIBTOOL = @LIBTOOL@
-LIBXML_CFLAGS = @LIBXML_CFLAGS@
-LIBXML_LIBS = @LIBXML_LIBS@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-LT_VERSION = @LT_VERSION@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MATECONFTOOL = @MATECONFTOOL@
-MATECONF_CFLAGS = @MATECONF_CFLAGS@
-MATECONF_LIBS = @MATECONF_LIBS@
-MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@
-MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@
-MKDIR_P = @MKDIR_P@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGFMT_OPTS = @MSGFMT_OPTS@
-MSGMERGE = @MSGMERGE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POFILES = @POFILES@
-POSUB = @POSUB@
-PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
-PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
-PYGOBJECT_CFLAGS = @PYGOBJECT_CFLAGS@
-PYGOBJECT_LIBS = @PYGOBJECT_LIBS@
-PYGTK_DEFS = @PYGTK_DEFS@
-PYTHON = @PYTHON@
-PYTHONDIR = @PYTHONDIR@
-PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
-PYTHON_INCLUDES = @PYTHON_INCLUDES@
-PYTHON_PLATFORM = @PYTHON_PLATFORM@
-PYTHON_PREFIX = @PYTHON_PREFIX@
-PYTHON_VERSION = @PYTHON_VERSION@
-RANLIB = @RANLIB@
-REGEX_LIBS = @REGEX_LIBS@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-WARN_CFLAGS = @WARN_CFLAGS@
-XGETTEXT = @XGETTEXT@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgpyexecdir = @pkgpyexecdir@
-pkgpythondir = @pkgpythondir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-pyexecdir = @pyexecdir@
-pythondir = @pythondir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-libmateweatherdtddir = $(pkgdatadir)
-libmateweatherdtd_DATA = locations.dtd
-libmateweatherlocationsdir = $(pkgdatadir)
-libmateweatherlocations_in_files = Locations.xml.in
-@USE_ONE_BIG_XML_FALSE@LOCATIONS_STAMP = stamp-Locations.xml
-@USE_ONE_BIG_XML_TRUE@LOCATIONS_STAMP = 
-@USE_ONE_BIG_XML_FALSE@libmateweatherlocations_DATA = $(shell echo $(PO_LOCATIONS) | sed "s|$(top_srcdir)/po-locations/|Locations.|g;s|\.po|.xml$(COMPRESS_EXT)|g") $(libmateweatherlocations_data)$(COMPRESS_EXT)
-@USE_ONE_BIG_XML_TRUE@libmateweatherlocations_DATA = $(libmateweatherlocations_in_files:.xml.in=.xml$(COMPRESS_EXT))
-@USE_ONE_BIG_XML_FALSE@PO_LOCATIONS = $(shell if test -n "$(LINGUAS)"; then for lang in $(LINGUAS); do if test -f "$(top_srcdir)/po-locations/$$lang.po"; then echo "$(top_srcdir)/po-locations/$$lang.po "; fi; done; else for pofile in $(top_srcdir)/po-locations/*.po; do echo $$pofile; done; fi)
-
-# Helper variable
-@USE_ONE_BIG_XML_FALSE@libmateweatherlocations_data = $(libmateweatherlocations_in_files:.xml.in=.xml)
-EXTRA_DIST = \
-	$(libmateweatherlocations_in_files)	\
-	$(libmateweatherdtd_DATA)			\
-	check-timezones.sh			\
-	README					\
-	README.timezones
-
-CLEANFILES = \
-	$(libmateweatherlocations_DATA)		\
-	$(LOCATIONS_STAMP)
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu data/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu data/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-install-libmateweatherdtdDATA: $(libmateweatherdtd_DATA)
-	@$(NORMAL_INSTALL)
-	test -z "$(libmateweatherdtddir)" || $(MKDIR_P) "$(DESTDIR)$(libmateweatherdtddir)"
-	@list='$(libmateweatherdtd_DATA)'; test -n "$(libmateweatherdtddir)" || list=; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(libmateweatherdtddir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(libmateweatherdtddir)" || exit $$?; \
-	done
-
-uninstall-libmateweatherdtdDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(libmateweatherdtd_DATA)'; test -n "$(libmateweatherdtddir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$files" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(libmateweatherdtddir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(libmateweatherdtddir)" && rm -f $$files
-install-libmateweatherlocationsDATA: $(libmateweatherlocations_DATA)
-	@$(NORMAL_INSTALL)
-	test -z "$(libmateweatherlocationsdir)" || $(MKDIR_P) "$(DESTDIR)$(libmateweatherlocationsdir)"
-	@list='$(libmateweatherlocations_DATA)'; test -n "$(libmateweatherlocationsdir)" || list=; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(libmateweatherlocationsdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(libmateweatherlocationsdir)" || exit $$?; \
-	done
-
-uninstall-libmateweatherlocationsDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(libmateweatherlocations_DATA)'; test -n "$(libmateweatherlocationsdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$files" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(libmateweatherlocationsdir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(libmateweatherlocationsdir)" && rm -f $$files
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(libmateweatherdtddir)" "$(DESTDIR)$(libmateweatherlocationsdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-libmateweatherdtdDATA \
-	install-libmateweatherlocationsDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-libmateweatherdtdDATA \
-	uninstall-libmateweatherlocationsDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-libmateweatherdtdDATA \
-	install-libmateweatherlocationsDATA install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
-	uninstall-libmateweatherdtdDATA \
-	uninstall-libmateweatherlocationsDATA
-
-
-@USE_ONE_BIG_XML_TRUE@%.xml$(COMPRESS_EXT): %.xml.in $(wildcard $(top_srcdir)/po-locations/*.po)
-@USE_ONE_BIG_XML_TRUE@	$(AM_V_GEN)LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po-locations/.intltool-merge-cache $(top_srcdir)/po-locations $< `echo $@ | sed "s/.xml$(COMPRESS_EXT)/.xml/"` && \
-@USE_ONE_BIG_XML_TRUE@	if test "x$(COMPRESS_EXT)" = "x.gz"; then				\
-@USE_ONE_BIG_XML_TRUE@		gzip --force `echo $@ | sed "s/.xml$(COMPRESS_EXT)/.xml/"`;	\
-@USE_ONE_BIG_XML_TRUE@	fi
-
-# We need this step so that we merge all the make Locations.xy.xml destinations
-# into one unique destination. This makes -j2 work. (Else, we end up with
-# multiple and conflicting calls to intltool-merge)
-@USE_ONE_BIG_XML_FALSE@$(libmateweatherlocations_DATA): $(LOCATIONS_STAMP)
-
-@USE_ONE_BIG_XML_FALSE@$(LOCATIONS_STAMP): $(libmateweatherlocations_in_files) $(PO_LOCATIONS) Makefile
-@USE_ONE_BIG_XML_FALSE@	$(AM_V_at)LC_ALL=C $(INTLTOOL_MERGE) --multiple-output --xml-style --utf8 --cache=$(top_builddir)/po-locations/.intltool-merge-cache $(top_srcdir)/po-locations $< $(libmateweatherlocations_data) && \
-@USE_ONE_BIG_XML_FALSE@	for pofile in $(PO_LOCATIONS); do \
-@USE_ONE_BIG_XML_FALSE@		locale=`echo $$pofile | sed "s;$(top_srcdir)/po-locations/\(.*\)\.po;\1;"`;	\
-@USE_ONE_BIG_XML_FALSE@		xmllint --noblanks -o Locations.$$locale.xml $$locale/$(libmateweatherlocations_data); \
-@USE_ONE_BIG_XML_FALSE@		rm -f $$locale/$(libmateweatherlocations_data);		\
-@USE_ONE_BIG_XML_FALSE@		test -d $$locale && rmdir $$locale;			\
-@USE_ONE_BIG_XML_FALSE@		if test "x$(COMPRESS_EXT)" = "x.gz"; then		\
-@USE_ONE_BIG_XML_FALSE@			gzip --force Locations.$$locale.xml;		\
-@USE_ONE_BIG_XML_FALSE@		fi;							\
-@USE_ONE_BIG_XML_FALSE@	done &&								\
-@USE_ONE_BIG_XML_FALSE@	xmllint --noblanks -o Locations.xml C/$(libmateweatherlocations_data) && \
-@USE_ONE_BIG_XML_FALSE@	rm -f C/$(libmateweatherlocations_data) &&				\
-@USE_ONE_BIG_XML_FALSE@	test -d C && rmdir C &&						\
-@USE_ONE_BIG_XML_FALSE@	if test "x$(COMPRESS_EXT)" = "x.gz"; then			\
-@USE_ONE_BIG_XML_FALSE@		gzip --force Locations.xml;				\
-@USE_ONE_BIG_XML_FALSE@	fi &&								\
-@USE_ONE_BIG_XML_FALSE@	touch $@
-
-check:
-	xmllint --valid --noout $(top_srcdir)/data/Locations.xml.in
-	$(srcdir)/check-timezones.sh $(srcdir)/Locations.xml.in
-
-### Locations.xml.in rebuild
-rebuild-locations: locationdb.sqlite update-locations.py
-	$(AM_V_GEN)($(srcdir)/update-locations.py > Locations.xml.in.new && mv Locations.xml.in.new Locations.xml.in) || rm -f Locations.xml.in.new
-
-locationdb.sqlite: build-locationdb.pl major-cities.txt sources/nsd_cccc.txt sources/POP_PLACES.txt sources/US_CONCISE.txt sources/geonames_dd_dms_date_*.txt city-fixups.pl station-fixups.pl
-	$(AM_V_GEN)$(srcdir)/build-locationdb.pl
-
--include $(top_srcdir)/git.mk
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: