add new languages and sync with transiflex

1 files changed, 131 insertions, 37 deletions

diff --git a/po/nl.po b/po/nl.po
index 0e12a4c..9731ebf 100644
--- a/po/nl.po
+++ b/po/nl.po
@@ -3,17 +3,20 @@
 # This file is distributed under the same license as the PACKAGE package.
 # 
 # Translators:
+# dragnadh <[email protected]>, 2016
 # infirit <[email protected]>, 2015
+# Kees Lijkendijk <[email protected]>, 2016
 # Michael Steenbeek <[email protected]>, 2012-2013
+# Robbie Deighton <[email protected]>, 2016
 # Tino Meinen <[email protected]>, 2003-2004,2006-2007
 # Vincent van Adrighem <[email protected]>, 2003
 msgid ""
 msgstr ""
 "Project-Id-Version: MATE Desktop Environment\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2015-09-06 20:16+0200\n"
-"PO-Revision-Date: 2015-09-06 18:18+0000\n"
-"Last-Translator: infirit <[email protected]>\n"
+"POT-Creation-Date: 2016-03-21 17:48+0300\n"
+"PO-Revision-Date: 2016-03-29 06:49+0000\n"
+"Last-Translator: Kees Lijkendijk <[email protected]>\n"
 "Language-Team: Dutch (http://www.transifex.com/mate/MATE/language/nl/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -159,129 +162,220 @@ msgstr "Metrische eenheden gebruiken"
 msgid "Use metric units instead of english units."
 msgstr "Metrische eenheden gebruiken in plaats van engelse eenheden."
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:9
+#. TRANSLATORS: pick a default distance unit for your locale, see key
+#. description
+#. for valid values; values must be quoted
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:11
+msgid "'miles'"
+msgstr "'mijl'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:12
 msgid "Distance unit"
 msgstr "Afstandseenheid"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:10
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:13
 msgid "The unit to use for visibility. Values: 'meters', 'km' ,'miles'."
 msgstr "De eenheid voor zichtafstand. Mogelijke waarden: 'meters', 'km', 'miles'."
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:11
+#. TRANSLATORS: pick a default pressure unit for your locale, see key
+#. description
+#. for valid values; values must be quoted
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:16
+msgid "'inHg'"
+msgstr "'inHg'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:17
 msgid "Pressure unit"
 msgstr "Luchtdrukeenheid"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:12
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:18
 msgid ""
-"The unit to use for pressure. Values: 'kPa', 'hPa', 'mb', 'mmHg', 'inHg, "
+"The unit to use for pressure. Values: 'kPa', 'hPa', 'mb', 'mmHg', 'inHg', "
 "'atm'."
-msgstr "De eenheid voor luchtdruk. Mogelijke waarden: 'kPa', 'hPa', 'mb', 'mmHg', 'inHg, 'atm'."
+msgstr "De te gebruiken eenheid voor luchtdruk. Mogelijke waarden: 'kPa', 'hPa', 'mb', 'mmHg', 'inHg, 'atm'."
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:13
+#. TRANSLATORS: pick a default speed unit for your locale, see key description
+#. for valid values; values must be quoted
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:21
+msgid "'knots'"
+msgstr "'knopen'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:22
 msgid "Speed unit"
 msgstr "Snelheidseenheid"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:14
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:23
 msgid ""
 "The unit to use for wind speed. Values: 'm/s', 'km/h, 'mph', 'knots', "
 "'Beaufort scale'."
 msgstr "De eenheid voor windsnelheid. Mogelijke waarden: 'm/s', 'km/h, 'mph', 'knots', 'Beaufort scale'."
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:15
+#. TRANSLATORS: pick a temperature unit that should be used by default in your
+#. locale, see key description for valid values; values must be quoted
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:26
+msgid "'Fahrenheit'"
+msgstr "'Fahrenheit'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:27
 msgid "Temperature unit"
 msgstr "Temperatuureenheid"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:16
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:28
 msgid ""
 "The unit to use for temperature. Values: 'Kelvin', 'Centigrade', "
 "'Fahrenheit'."
 msgstr "De eenheid voor temperatuur. Waarden: 'Kelvin', 'Centigrade', 'Fahrenheit'."
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:17
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:29
 msgid "Not used anymore"
 msgstr "Niet meer gebruikt"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:18
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:30
 msgid "Display radar map"
 msgstr "Radarkaart weergeven"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:19
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:31
 msgid "Fetch a radar map on each update."
 msgstr "Radarkaart ophalen bij iedere update."
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:20
+#. TRANSLATORS: Change this to the default location name, used
+#. when you first start the Weather Applet. This is the common
+#. localised name that corresponds to the location code
+#. (DEFAULT_CODE) you will put on the next message. For example, for
+#. the Greek locale, we set this to "Athens", the capital city and we
+#. write it in Greek. It's important to translate this name. If you
+#. do not require a DEFAULT_LOCATION, set this to
+#. "DEFAULT_LOCATION".
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:40
+msgid "'DEFAULT_LOCATION'"
+msgstr "'DEFAULT_LOCATION'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:41
 msgid "Weather location information"
 msgstr "Weerbericht locatie-informatie"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:21
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:42
 msgid "Weather location information."
 msgstr "Weerbericht locatie-informatie."
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:22
+#. TRANSLATORS: Change this to the code of your default location
+#. that corresponds to the DEFAULT_LOCATION name you put above. This
+#. is normally a four-letter (ICAO) code and can be found in
+#. https://github.com/mate-
+#. desktop/libmateweather/blob/master/data/Locations.xml.in.
+#. NB. The web page is over 1.7MB in size. Pick a default location
+#. like a capital city so that it would be ok for more of your users.
+#. For example, for Greek, we use "LGAV" for the capital city, Athens.
+#. If you do not require a DEFAULT_CODE, set this to "DEFAULT_CODE".
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:51
+msgid "'DEFAULT_CODE'"
+msgstr "'DEFAULT_CODE'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:52
 msgid "Nearby city"
 msgstr "Dichtstbijzijnde stad"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:23
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:53
 msgid ""
 "Nearby major zone, such as a capital city, as found from "
 "https://raw.github.com/mate-"
 "desktop/libmateweather/master/data/Locations.xml.in"
 msgstr "Dichtsbijzijnde hoofdzone, bijvoorbeeld een hoofdstad. U kunt deze vinden op https://raw.github.com/mate-desktop/libmateweather/master/data/Locations.xml.in"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:24
+#. TRANSLATORS: Change this to the zone of your default location
+#. that corresponds to the DEFAULT_LOCATION and DEFAULT_CODE you put
+#. above. Normally, US and Canada locations have zones while the rest
+#. do not. Check
+#. https://github.com/mate-
+#. desktop/libmateweather/blob/master/data/Locations.xml.in
+#. as any zone you put here must also be present in the Locations.xml
+#. file. If your default location does not have a zone, set this to
+#. "DEFAULT_ZONE".
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:62
+msgid "'DEFAULT_ZONE'"
+msgstr "'DEFAULT_ZONE'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:63
 msgid "Zone location"
 msgstr "Zonelocatie"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:25
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:64
 msgid ""
 "A unique zone for the city, as found from https://raw.github.com/mate-"
 "desktop/libmateweather/master/data/Locations.xml.in"
 msgstr "Een unieke zone voor de stad. U kunt deze vinden op https://raw.github.com/mate-desktop/libmateweather/master/data/Locations.xml.in"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:26
+#. TRANSLATORS: Change this to the radar of your default location
+#. that corresponds to the DEFAULT_LOCATION and DEFAULT_CODE you put
+#. above. Normally, US and Canada locations have radar names while the
+#. rest do not. Check
+#. https://github.com/mate-
+#. desktop/libmateweather/blob/master/data/Locations.xml.in
+#. as any radar you put here must also be present in the Locations.xml
+#. file. If your default location does not have a radar, set this to
+#. " " (or space).
+#. If you do not have a default location, set this to DEFAULT_RADAR.
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:74
+msgid "'DEFAULT_RADAR'"
+msgstr "'DEFAULT_RADAR'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:75
 msgid "Radar location"
 msgstr "Radarlocatie"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:27
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:76
 msgid ""
 "A three-digit-long code for retrieving radar maps from weather.com, found "
 "from https://raw.github.com/mate-"
 "desktop/libmateweather/master/data/Locations.xml.in"
 msgstr "Een 3-cijferige code voor het ophalen van radarkaarten van weather.com. U kunt deze vinden op https://raw.github.com/mate-desktop/libmateweather/master/data/Locations.xml.in"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:28
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:77
 msgid "Weather for a city"
 msgstr "Weerbericht voor een stad"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:29
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:78
 msgid "The city that mateweather displays information for."
 msgstr "De stad waarover mateweather informatie toont."
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:30
+#. TRANSLATORS: Change this to the coordinates of your default
+#. location that corresponds to the DEFAULT_LOCATION and DEFAULT_CODE
+#. you put above. Check
+#. https://github.com/mate-
+#. desktop/libmateweather/blob/master/data/Locations.xml.in
+#. as any coordinates you put here must also be present in the
+#. Locations.xml file. If your default location does not have known
+#. coordinates, set this to " " (or space). If you do not have a
+#. default location, set this to DEFAULT_COORDINATES.
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:87
+msgid "'DEFAULT_COORDINATES'"
+msgstr "'DEFAULT_COORDINATES'"
+
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:88
 msgid "Location coordinates"
 msgstr "Locatiecoördinaten"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:31
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:89
 msgid ""
 "Latitude and longitude of your location expressed in DD-MM-SS[NS] DD-MM-"
 "SS[EW]."
 msgstr "Lengte- en breedtegraad van uw locatie uitgedrukt in DD-MM-SS[NS] DD-MM-SS[EW]."
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:32
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:90
 msgid "Use custom url for the radar map"
 msgstr "Aangepaste URL gebruiken voor de radarkaart"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:33
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:91
 msgid ""
 "If true, then retrieve a radar map from a location specified by the "
 "\"radar\" key."
 msgstr "Indien ingeschakeld, een radarkaart ophalen van de locatie gespecificeerd in de sleutel \"radar\"."
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:34
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:92
 msgid "Url for the radar map"
 msgstr "URL voor de radarkaart"
 
-#: ../libmateweather/org.mate.weather.gschema.xml.in.h:35
+#: ../libmateweather/org.mate.weather.gschema.xml.in.h:93
 msgid "The custom url from where to retrieve a radar map."
 msgstr "De aangepaste URL voor de radarkaart."
 
@@ -495,24 +589,24 @@ msgstr "Zware sneeuwbuien"
 #. ICE_CRYSTALS
 #: ../libmateweather/weather.c:307
 msgid "Ice crystals"
-msgstr "Hagel"
+msgstr "zeer fijne Hagel"
 
 #. ICE_PELLETS
 #: ../libmateweather/weather.c:308
 msgid "Ice pellets"
-msgstr "Hagelbuien"
+msgstr "fijne hagel"
 
 #: ../libmateweather/weather.c:308
 msgid "Few ice pellets"
-msgstr "Lichte hagelbuien"
+msgstr "Lichte hagel"
 
 #: ../libmateweather/weather.c:308
 msgid "Moderate ice pellets"
-msgstr "Matige hagelbuien"
+msgstr "Matige hagel"
 
 #: ../libmateweather/weather.c:308
 msgid "Heavy ice pellets"
-msgstr "Zware hagelbuien"
+msgstr "Zware hagel"
 
 #: ../libmateweather/weather.c:308
 msgid "Ice pellet storm"