removing empty gswitchit and unused gkb-new

1 files changed, 0 insertions, 211 deletions

diff --git a/gkb-new/xmodmap/xmodmap.us-101 b/gkb-new/xmodmap/xmodmap.us-101
deleted file mode 100644
index c497e0df..00000000
--- a/gkb-new/xmodmap/xmodmap.us-101
+++ /dev/null
@@ -1,211 +0,0 @@
-!
-! $XFree86: xc/programs/Xserver/hw/xfree86/etc/xmodmap.std,v 3.5 1996/12/23 06:47:28 dawes Exp $
-!
-! Standard key mapping for XFree86 (for US keyboards).
-!
-! This file can be fed to xmodmap to restore the default mapping.
-!
-! $XConsortium: xmodmap.std /main/7 1996/02/21 17:48:55 kaleb $
-!
-! First, clear the modifiers
-!
-clear    shift
-clear    lock
-clear    control
-clear    mod1
-clear    mod2
-clear    mod3
-clear    mod4
-clear    mod5
-!
-! Set the mapping for each key
-!
-keycode   8 =
-keycode   9 = Escape
-keycode  10 = 1 exclam
-keycode  11 = 2 at
-keycode  12 = 3 numbersign
-keycode  13 = 4 dollar
-keycode  14 = 5 percent
-keycode  15 = 6 asciicircum
-keycode  16 = 7 ampersand
-keycode  17 = 8 asterisk
-keycode  18 = 9 parenleft
-keycode  19 = 0 parenright
-keycode  20 = minus underscore
-keycode  21 = equal plus
-keycode  22 = BackSpace
-keycode  23 = Tab
-keycode  24 = q Q
-keycode  25 = w W
-keycode  26 = e E
-keycode  27 = r R
-keycode  28 = t T
-keycode  29 = y Y
-keycode  30 = u U
-keycode  31 = i I
-keycode  32 = o O
-keycode  33 = p P
-keycode  34 = bracketleft braceleft
-keycode  35 = bracketright braceright
-keycode  36 = Return
-keycode  37 = Control_L
-keycode  38 = a A
-keycode  39 = s S
-keycode  40 = d D
-keycode  41 = f F
-keycode  42 = g G
-keycode  43 = h H
-keycode  44 = j J
-keycode  45 = k K
-keycode  46 = l L
-keycode  47 = semicolon colon
-keycode  48 = apostrophe quotedbl
-keycode  49 = grave asciitilde
-keycode  50 = Shift_L
-keycode  51 = backslash bar
-keycode  52 = z Z
-keycode  53 = x X
-keycode  54 = c C
-keycode  55 = v V
-keycode  56 = b B
-keycode  57 = n N
-keycode  58 = m M
-keycode  59 = comma less
-keycode  60 = period greater
-keycode  61 = slash question
-keycode  62 = Shift_R
-keycode  63 = KP_Multiply
-keycode  64 = Alt_L Meta_L
-keycode  65 = space
-keycode  66 = Caps_Lock
-keycode  67 = F1
-keycode  68 = F2
-keycode  69 = F3
-keycode  70 = F4
-keycode  71 = F5
-keycode  72 = F6
-keycode  73 = F7
-keycode  74 = F8
-keycode  75 = F9
-keycode  76 = F10
-keycode  77 = Num_Lock
-keycode  78 = Multi_key
-keycode  79 = KP_Home KP_7
-keycode  80 = KP_Up KP_8
-keycode  81 = KP_Prior KP_9
-keycode  82 = KP_Subtract
-keycode  83 = KP_Left KP_4
-keycode  84 = NoSymbol KP_5
-keycode  85 = KP_Right KP_6
-keycode  86 = KP_Add
-keycode  87 = KP_End KP_1
-keycode  88 = KP_Down KP_2
-keycode  89 = KP_Next KP_3
-keycode  90 = KP_Insert KP_0
-keycode  91 = KP_Delete KP_Decimal
-!keycode  92 = X386Sys_Req
-keycode  93 =
-keycode  94 =
-keycode  95 = F11
-keycode  96 = F12
-! keycodes 97-107 are not available on 84-key keyboards
-keycode  97 = Home
-keycode  98 = Up
-keycode  99 = Prior
-keycode 100 = Left
-keycode 101 = Begin
-keycode 102 = Right
-keycode 103 = End
-keycode 104 = Down
-keycode 105 = Next
-keycode 106 = Insert
-keycode 107 = Delete
-keycode 108 = KP_Enter
-keycode 109 = Control_R
-keycode 110 = Pause
-keycode 111 = Print
-keycode 112 = KP_Divide
-keycode 113 = Alt_R Meta_R
-keycode 114 = Break
-! keycodes 115-117 are only available on some extended keyboards
-! (e.g., Microsoft's ergonomic keyboard).
-keycode 115 = Meta_L
-keycode 116 = Meta_R
-keycode 117 = Menu
-!
-! Set the modifiers
-!
-add     shift   = Shift_L Shift_R
-add     lock    = Caps_Lock
-add     control = Control_L Control_R
-add     mod1    = Alt_L Alt_R
-! If you have ServerNumlock set in your XF86Config, you can comment out
-add     mod2    = Num_Lock
-!
-!
-!
-! If you use any of the special default key mappings in Xconfig, they should be
-! duplicated in this file.  Mappings should be added before the section above
-! which sets the modifiers.
-!
-!  For the key specs:
-!     LeftAlt     =>  keycode  64
-!     RightAlt    =>  keycode 113
-!     AltGr       =>  keycode 113
-!     ScrollLock  =>  keycode  78
-!     RightCtl    =>  keycode 109
-!     
-!  For the mappings:
-!     Meta        =>  Alt_L Meta_L
-!                     Alt_R Meta_R
-!     Compose     =>  Multi_key
-!     ModeShift   =>  Mode_switch
-!     ModeLock    =>  Mode_switch X386Mode_Lock
-!     ScrollLock  =>  Scroll_Lock
-!     Control     =>  Control_R
-!    
-!  If you use ModeShift or ModeLock, the following modifier must be set:
-!
-!add     mod5    = Mode_switch
-!
-!  For example, to get the equivalent of:
-!
-!  ScrollLock  ModeLock
-!  RightAlt    ModeShift
-!  LeftAlt     Meta
-!  RightCtl    Compose
-!
-!  use the following:
-!
-!keycode  78 = Mode_switch X386Mode_Lock
-!keycode 113 = Mode_switch
-!keycode  64 = Alt_L Meta_L
-!keycode 109 = Multi_key
-!
-!add    mod5   = Mode_switch
-
-! When using ServerNumLock in your XF86Config, the following codes/symbols
-! are available in place of 79-81, 83-85, 87-91
-!keycode  136 = KP_7
-!keycode  137 = KP_8
-!keycode  138 = KP_9
-!keycode  139 = KP_4
-!keycode  140 = KP_5
-!keycode  141 = KP_6
-!keycode  142 = KP_1
-!keycode  143 = KP_2
-!keycode  144 = KP_3
-!keycode  145 = KP_0
-!keycode  146 = KP_Decimal
-!keycode  147 = Home
-!keycode  148 = Up
-!keycode  149 = Prior
-!keycode  150 = Left
-!keycode  151 = Begin
-!keycode  152 = Right
-!keycode  153 = End
-!keycode  154 = Down
-!keycode  155 = Next
-!keycode  156 = Insert
-!keycode  157 = Delete