diff options
| -rw-r--r-- | .build.yml | 3 | ||||
| -rw-r--r-- | configure.ac | 61 | ||||
| -rw-r--r-- | netspeed/src/Makefile.am | 20 | ||||
| -rw-r--r-- | netspeed/src/backend.c | 562 | ||||
| -rw-r--r-- | netspeed/src/backend.h | 22 | ||||
| -rw-r--r-- | netspeed/src/ieee80211.h | 61 | ||||
| -rw-r--r-- | netspeed/src/netspeed.c | 203 | ||||
| -rw-r--r-- | netspeed/src/nl80211.h | 6552 | ||||
| -rw-r--r-- | po/POTFILES.in | 1 |
9 files changed, 7367 insertions, 118 deletions
@@ -43,6 +43,7 @@ requires: - libiw-dev - libmate-panel-applet-dev - libmateweather-dev + - libnl-genl-3-dev - libnotify-dev - libpolkit-gobject-1-dev - libupower-glib-dev @@ -66,6 +67,7 @@ requires: - gucharmap-devel - kernel-tools-libs-devel - libgtop2-devel + - libnl3-devel - libnotify-devel - libmateweather-devel - libwnck3-devel @@ -100,6 +102,7 @@ requires: - libiw-dev - libmate-panel-applet-dev - libmateweather-dev + - libnl-genl-3-dev - libnotify-dev - libpolkit-gobject-1-dev - libupower-glib-dev diff --git a/configure.ac b/configure.ac index 14302952..d08f7e13 100644 --- a/configure.ac +++ b/configure.ac @@ -150,7 +150,7 @@ if test "x$with_upower" != xno; then PKG_CHECK_MODULES(UPOWER, upower-glib >= $UPOWER_REQUIRED, HAVE_UPOWER="yes", HAVE_UPOWER="no") - + if test "x$HAVE_UPOWER" = "xyes"; then AC_DEFINE(HAVE_UPOWER, 1, [UPOWER available]) fi @@ -399,24 +399,54 @@ dnl *************************************************************************** AM_CONDITIONAL(BUILD_TIMERAPPLET, test "x$HAVE_LIBNOTIFY" = "xyes") dnl *************************************************************************** -dnl *** iwlib support for netspeed applet *** +dnl *** iwlib/netfilter support for netspeed applet *** dnl *************************************************************************** + +AC_ARG_WITH(iwevgenie, + AS_HELP_STRING([--with-iwevgenie], + [Build with iwlib support for netspeed applet]), + [], + [with_iwevgenie=no]) +AC_ARG_WITH(nl, + AS_HELP_STRING([--with-nl], + [Build with netfilter support for netspeed applet]), + [], + [with_nl=yes]) + +if test "x$with_iwevgenie" = "xyes" -a "x$with_nl" = "xyes"; then + AC_MSG_ERROR([--with-iwevgenie and --with-nl cannot be used at the same time]) +fi + have_iwevgenie=no -AC_MSG_CHECKING([for libiw >= 28pre9]) -AC_COMPILE_IFELSE([AC_LANG_PROGRAM([ - #include <iwlib.h> - #ifndef IWEVGENIE - #error "not found" - #endif])], - [have_iwevgenie=yes], +if test "x$with_iwevgenie" = "xyes"; then + AC_MSG_CHECKING([for libiw >= 28pre9]) + AC_COMPILE_IFELSE([AC_LANG_PROGRAM([ + #include <iwlib.h> + #ifndef IWEVGENIE + #error "not found" + #endif])], + [have_iwevgenie=yes], AC_MSG_WARN([iwlib.h not found. It's provided by libiw or wireless-tools (depends on the distro)]) -) -AC_MSG_RESULT([$have_iwevgenie]) -if test "$have_iwevgenie" = yes; then - AC_DEFINE(HAVE_IW, 1, [Defined if you have libiw/wireless-tools (depends on the distro)]) - IWLIB=-liw - AC_SUBST(IWLIB) + ) + AC_MSG_RESULT([$have_iwevgenie]) +fi +if test "x$have_iwevgenie" = "xyes"; then + AC_DEFINE(HAVE_IW, 1, [Defined if you have libiw/wireless-tools (depends on the distro)]) + IW_LIBS=-liw + AC_SUBST(IW_LIBS) +fi +AM_CONDITIONAL(HAVE_IW, test "x$have_iwevgenie" = "xyes") + +have_nl=no +if test "x$with_nl" = "xyes"; then + PKG_CHECK_MODULES(NL, libnl-genl-3.0, [have_nl=yes]) +fi +if test "x$have_nl" = "xyes"; then + AC_DEFINE(HAVE_NL, 1, [Enable Generic Netlink Library]) + AC_SUBST(NL_CFLAGS) + AC_SUBST(NL_LIBS) fi +AM_CONDITIONAL(HAVE_NL, test "x$have_nl" = "xyes") dnl *************************************************************************** dnl *** Check if IPv6 is available *** @@ -627,6 +657,7 @@ mate-applets-$VERSION configure summary: - multiload $build_gtop_applets - netspeed $build_gtop_applets - iwlib support $have_iwevgenie + - netfilter support $have_nl - stickynotes $enable_stickynotes - timerapplet $HAVE_LIBNOTIFY - trashapplet always diff --git a/netspeed/src/Makefile.am b/netspeed/src/Makefile.am index 26d5b854..00cfdc60 100644 --- a/netspeed/src/Makefile.am +++ b/netspeed/src/Makefile.am @@ -13,6 +13,10 @@ AM_CPPFLAGS = \ -DNETSPEED_MENU_UI_DIR=\""$(datadir)/mate/ui"\" \ ${WARN_CFLAGS} +if HAVE_NL +AM_CPPFLAGS += $(NL_CFLAGS) +endif + libexec_PROGRAMS = mate-netspeed-applet BUILT_SOURCES = netspeed-resources.c netspeed-resources.h @@ -23,9 +27,23 @@ mate_netspeed_applet_SOURCES = \ netspeed.c \ $(NULL) +if HAVE_NL +mate_netspeed_applet_SOURCES += \ + nl80211.h \ + ieee80211.h \ + $(NULL) +endif + mate_netspeed_applet_LDADD = $(GIO_LIBS) $(GTOP_APPLETS_LIBS) \ $(MATE_APPLETS4_LIBS) \ - $(IWLIB) $(INTLLIBS) -lm + $(INTLLIBS) -lm + +if HAVE_IW +mate_netspeed_applet_LDADD += $(IW_LIBS) +endif +if HAVE_NL +mate_netspeed_applet_LDADD += $(NL_LIBS) +endif netspeed-resources.c: netspeed-resources.gresource.xml $(shell $(GLIB_COMPILE_RESOURCES) --sourcedir=$(srcdir) --generate-dependencies $(srcdir)/netspeed-resources.gresource.xml) $(AM_V_GEN)$(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=$(srcdir) --generate --c-name netspeed $< diff --git a/netspeed/src/backend.c b/netspeed/src/backend.c index a3418f82..572928cc 100644 --- a/netspeed/src/backend.c +++ b/netspeed/src/backend.c @@ -27,14 +27,36 @@ #include <sys/sockio.h> #endif +#include <glib.h> +#include <glib/gi18n.h> #include <glibtop/netlist.h> #include <glibtop/netload.h> +#include "backend.h" + #ifdef HAVE_IW - #include <iwlib.h> +#include <iwlib.h> #endif /* HAVE_IW */ -#include "backend.h" +#ifdef HAVE_NL + +#include <errno.h> +#include <linux/netlink.h> +#include <netlink/genl/genl.h> +#include <netlink/genl/family.h> +#include <netlink/genl/ctrl.h> +#include <netlink/attr.h> +#include <netlink/msg.h> + +#include "nl80211.h" +#include "ieee80211.h" + +struct nl80211_state { + struct nl_sock *sock; + int nl80211_id; +}; + +#endif /* HAVE_NL */ gboolean is_dummy_device(const char* device) @@ -118,14 +140,12 @@ get_default_route(void) return NULL; } - void free_devices_list(GList *list) { g_list_free_full (list, g_free); } - /* Frees a DevInfo struct and all the stuff it contains */ void @@ -135,17 +155,15 @@ free_device_info(DevInfo *devinfo) g_free(devinfo->ip); g_free(devinfo->netmask); g_free(devinfo->ptpip); - g_free(devinfo->hwaddr); g_free(devinfo->ipv6); g_free(devinfo->essid); - g_free(devinfo->tx_rate); - g_free(devinfo->rx_rate); - g_free(devinfo->sum_rate); +#ifdef HAVE_NL + g_free(devinfo->tx_bitrate); + g_free(devinfo->rx_bitrate); + g_free(devinfo->channel); +#endif /* HAVE_NL */ } - - - static char* format_ipv4(guint32 ip) { @@ -154,7 +172,6 @@ format_ipv4(guint32 ip) return str; } - static char* format_ipv6(const guint8 ip[16]) { @@ -163,7 +180,6 @@ format_ipv6(const guint8 ip[16]) return str; } - /* TODO: these stuff are not portable because of ioctl */ @@ -191,10 +207,11 @@ get_ptp_info(DevInfo *devinfo) void -get_device_info(const char *device, DevInfo *devinfo) +get_device_info (const char *device, + DevInfo *devinfo) { glibtop_netload netload; - guint8 *hw; + gboolean ptp = FALSE; g_assert(device); @@ -204,61 +221,67 @@ get_device_info(const char *device, DevInfo *devinfo) devinfo->type = DEV_UNKNOWN; glibtop_get_netload(&netload, device); - devinfo->tx = netload.bytes_out; - devinfo->rx = netload.bytes_in; devinfo->up = (netload.if_flags & (1L << GLIBTOP_IF_FLAGS_UP) ? TRUE : FALSE); devinfo->running = (netload.if_flags & (1L << GLIBTOP_IF_FLAGS_RUNNING) ? TRUE : FALSE); - devinfo->ip = format_ipv4(netload.address); - devinfo->netmask = format_ipv4(netload.subnet); - devinfo->ipv6 = format_ipv6(netload.address6); - devinfo->qual = 0; - devinfo->essid = NULL; - - hw = netload.hwaddress; - if (hw[6] || hw[7]) { - devinfo->hwaddr = g_strdup_printf( - "%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", - hw[0], hw[1], hw[2], hw[3], - hw[4], hw[5], hw[6], hw[7]); - } else { - devinfo->hwaddr = g_strdup_printf( - "%02X:%02X:%02X:%02X:%02X:%02X", - hw[0], hw[1], hw[2], - hw[3], hw[4], hw[5]); - } - /* stolen from gnome-applets/multiload/linux-proc.c */ - - if(netload.if_flags & (1L << GLIBTOP_IF_FLAGS_LOOPBACK)) { - devinfo->type = DEV_LO; - } - -#ifdef HAVE_IW - - else if (netload.if_flags & (1L << GLIBTOP_IF_FLAGS_WIRELESS)) { - devinfo->type = DEV_WIRELESS; - get_wireless_info (devinfo); - } - + if (netload.if_flags & (1L << GLIBTOP_IF_FLAGS_LOOPBACK)) { + devinfo->type = DEV_LO; + } + else if (netload.if_flags & (1L << GLIBTOP_IF_FLAGS_WIRELESS)) { + devinfo->type = DEV_WIRELESS; + } + else if(netload.if_flags & (1L << GLIBTOP_IF_FLAGS_POINTOPOINT)) { + if (g_str_has_prefix(device, "plip")) { + devinfo->type = DEV_PLIP; + } + else if (g_str_has_prefix(device, "sl")) { + devinfo->type = DEV_SLIP; + } + else { + devinfo->type = DEV_PPP; + } + ptp = TRUE; + } + else { + devinfo->type = DEV_ETHERNET; + } + + switch (devinfo->type) { +#if defined (HAVE_NL) + case DEV_WIRELESS: + get_wireless_info (devinfo); + break; +#endif /* HAVE_NL */ + case DEV_LO: + break; +#if defined (HAVE_IW) + case DEV_WIRELESS: + get_wireless_info (devinfo); #endif /* HAVE_IW */ - - else if(netload.if_flags & (1L << GLIBTOP_IF_FLAGS_POINTOPOINT)) { - if (g_str_has_prefix(device, "plip")) { - devinfo->type = DEV_PLIP; - } - else if (g_str_has_prefix(device, "sl")) { - devinfo->type = DEV_SLIP; - } - else { - devinfo->type = DEV_PPP; - } - - get_ptp_info(devinfo); - } - else { - devinfo->type = DEV_ETHERNET; - } + default: + memcpy (devinfo->hwaddr, netload.hwaddress, 8); + break; + } + + if (devinfo->running) { + devinfo->ip = format_ipv4(netload.address); + devinfo->netmask = format_ipv4(netload.subnet); + devinfo->ipv6 = format_ipv6(netload.address6); +#if defined (HAVE_NL) + if (devinfo->type != DEV_WIRELESS) { + devinfo->tx = netload.bytes_out; + devinfo->rx = netload.bytes_in; + if (ptp) + get_ptp_info (devinfo); + } +#else + devinfo->tx = netload.bytes_out; + devinfo->rx = netload.bytes_in; + if (ptp) + get_ptp_info (devinfo); +#endif /* HAVE_NL */ + } } gboolean @@ -327,3 +350,412 @@ out: close (fd); } #endif /* HAVE_IW */ + +#ifdef HAVE_NL +int iw_debug = 0; + +static int +nl80211_init (struct nl80211_state *state) +{ + int err; + + state->sock = nl_socket_alloc (); + if (!state->sock) { + g_warning ("Failed to allocate netlink socket"); + return -ENOMEM; + } + + if (genl_connect (state->sock)) { + g_warning ("Failed to connect to generic netlink"); + err = -ENOLINK; + goto out_handle_destroy; + } + + nl_socket_set_buffer_size (state->sock, 8192, 8192); + + /* try to set NETLINK_EXT_ACK to 1, ignoring errors */ + err = 1; + setsockopt (nl_socket_get_fd (state->sock), SOL_NETLINK, + NETLINK_EXT_ACK, &err, sizeof (err)); + + state->nl80211_id = genl_ctrl_resolve (state->sock, "nl80211"); + if (state->nl80211_id < 0) { + g_warning ("nl80211 not found"); + err = -ENOENT; + goto out_handle_destroy; + } + + return 0; + +out_handle_destroy: + nl_socket_free (state->sock); + return err; +} + + +static void +nl80211_cleanup (struct nl80211_state *state) +{ + nl_socket_free (state->sock); +} + +static int +scan_cb (struct nl_msg *msg, + void *arg) +{ + DevInfo *devinfo = (DevInfo*) arg; + struct genlmsghdr *gnlh = nlmsg_data (nlmsg_hdr (msg)); + struct nlattr *tb[NL80211_ATTR_MAX + 1]; + struct nlattr *bss[NL80211_BSS_MAX + 1]; + static struct nla_policy bss_policy[NL80211_BSS_MAX + 1] = { + [NL80211_BSS_TSF] = { .type = NLA_U64 }, + [NL80211_BSS_FREQUENCY] = { .type = NLA_U32 }, + [NL80211_BSS_BSSID] = { }, + [NL80211_BSS_BEACON_INTERVAL] = { .type = NLA_U16 }, + [NL80211_BSS_CAPABILITY] = { .type = NLA_U16 }, + [NL80211_BSS_INFORMATION_ELEMENTS] = { }, + [NL80211_BSS_SIGNAL_MBM] = { .type = NLA_U32 }, + [NL80211_BSS_SIGNAL_UNSPEC] = { .type = NLA_U8 }, + [NL80211_BSS_STATUS] = { .type = NLA_U32 }, + [NL80211_BSS_SEEN_MS_AGO] = { .type = NLA_U32 }, + [NL80211_BSS_BEACON_IES] = { }, + }; + + /* Parse and error check. */ + nla_parse (tb, NL80211_ATTR_MAX, genlmsg_attrdata (gnlh, 0), genlmsg_attrlen (gnlh, 0), NULL); + if (!tb[NL80211_ATTR_BSS]) { + g_warning ("bss info missing!"); + return NL_SKIP; + } + if (nla_parse_nested (bss, NL80211_BSS_MAX, tb[NL80211_ATTR_BSS], bss_policy)) { + g_warning ("failed to parse nested attributes!"); + return NL_SKIP; + } + if (!bss[NL80211_BSS_BSSID]) return NL_SKIP; + if (!bss[NL80211_BSS_STATUS]) return NL_SKIP; + + if (nla_get_u32 (bss[NL80211_BSS_STATUS]) != NL80211_BSS_STATUS_ASSOCIATED) return NL_SKIP; + int len = MIN(ETH_ALEN, nla_len (bss[NL80211_BSS_BSSID])); + memcpy (devinfo->station_mac_addr, nla_data (bss[NL80211_BSS_BSSID]), len); + + return NL_SKIP; +} + +static void +parse_bitrate (struct nlattr *bitrate_attr, + char *buf, + int buflen) +{ + int rate = 0; + char *pos = buf; + struct nlattr *rinfo[NL80211_RATE_INFO_MAX + 1]; + static struct nla_policy rate_policy[NL80211_RATE_INFO_MAX + 1] = { + [NL80211_RATE_INFO_BITRATE] = { .type = NLA_U16 }, + [NL80211_RATE_INFO_BITRATE32] = { .type = NLA_U32 }, + [NL80211_RATE_INFO_MCS] = { .type = NLA_U8 }, + [NL80211_RATE_INFO_40_MHZ_WIDTH] = { .type = NLA_FLAG }, + [NL80211_RATE_INFO_SHORT_GI] = { .type = NLA_FLAG }, + }; + + if (nla_parse_nested (rinfo, NL80211_RATE_INFO_MAX, + bitrate_attr, rate_policy)) { + g_warning ("failed to parse nested rate attributes!"); + return; + } + + if (rinfo[NL80211_RATE_INFO_BITRATE32]) + rate = nla_get_u32 (rinfo[NL80211_RATE_INFO_BITRATE32]); + else if (rinfo[NL80211_RATE_INFO_BITRATE]) + rate = nla_get_u16 (rinfo[NL80211_RATE_INFO_BITRATE]); + if (rate > 0) + pos += snprintf (pos, buflen - (pos - buf), + _("%d.%d MBit/s"), rate / 10, rate % 10); + else + pos += snprintf (pos, buflen - (pos - buf), _("(unknown)")); + + if (rinfo[NL80211_RATE_INFO_MCS]) + pos += snprintf (pos, buflen - (pos - buf), + _(" MCS %d"), nla_get_u8 (rinfo[NL80211_RATE_INFO_MCS])); + if (rinfo[NL80211_RATE_INFO_VHT_MCS]) + pos += snprintf (pos, buflen - (pos - buf), + _(" VHT-MCS %d"), nla_get_u8 (rinfo[NL80211_RATE_INFO_VHT_MCS])); + if (rinfo[NL80211_RATE_INFO_40_MHZ_WIDTH]) + pos += snprintf (pos, buflen - (pos - buf), _(" 40MHz")); + if (rinfo[NL80211_RATE_INFO_80_MHZ_WIDTH]) + pos += snprintf (pos, buflen - (pos - buf), _(" 80MHz")); + if (rinfo[NL80211_RATE_INFO_80P80_MHZ_WIDTH]) + pos += snprintf (pos, buflen - (pos - buf), _(" 80P80MHz")); + if (rinfo[NL80211_RATE_INFO_160_MHZ_WIDTH]) + pos += snprintf (pos, buflen - (pos - buf), _(" 160MHz")); + if (rinfo[NL80211_RATE_INFO_SHORT_GI]) + pos += snprintf (pos, buflen - (pos - buf), _(" short GI)")); + if (rinfo[NL80211_RATE_INFO_VHT_NSS]) + pos += snprintf (pos, buflen - (pos - buf), + _(" VHT-NSS %d"), nla_get_u8 (rinfo[NL80211_RATE_INFO_VHT_NSS])); + if (rinfo[NL80211_RATE_INFO_HE_MCS]) + pos += snprintf (pos, buflen - (pos - buf), + _(" HE-MCS %d"), nla_get_u8 (rinfo[NL80211_RATE_INFO_HE_MCS])); + if (rinfo[NL80211_RATE_INFO_HE_NSS]) + pos += snprintf(pos, buflen - (pos - buf), + _(" HE-NSS %d"), nla_get_u8 (rinfo[NL80211_RATE_INFO_HE_NSS])); + if (rinfo[NL80211_RATE_INFO_HE_GI]) + pos += snprintf(pos, buflen - (pos - buf), + _(" HE-GI %d"), nla_get_u8 (rinfo[NL80211_RATE_INFO_HE_GI])); + if (rinfo[NL80211_RATE_INFO_HE_DCM]) + snprintf (pos, buflen - (pos - buf), + _(" HE-DCM %d"), nla_get_u8 (rinfo[NL80211_RATE_INFO_HE_DCM])); +} + +static int +station_cb (struct nl_msg *msg, + void *arg) +{ + DevInfo *devinfo = (DevInfo*) arg; + struct nlattr *tb[NL80211_ATTR_MAX + 1]; + struct genlmsghdr *gnlh = nlmsg_data (nlmsg_hdr (msg)); + struct nlattr *sinfo[NL80211_STA_INFO_MAX + 1]; + static struct nla_policy stats_policy[NL80211_STA_INFO_MAX + 1] = { + [NL80211_STA_INFO_INACTIVE_TIME] = { .type = NLA_U32 }, + [NL80211_STA_INFO_RX_BYTES] = { .type = NLA_U32 }, + [NL80211_STA_INFO_TX_BYTES] = { .type = NLA_U32 }, + [NL80211_STA_INFO_RX_PACKETS] = { .type = NLA_U32 }, + [NL80211_STA_INFO_TX_PACKETS] = { .type = NLA_U32 }, + [NL80211_STA_INFO_SIGNAL] = { .type = NLA_U8 }, + [NL80211_STA_INFO_RX_BITRATE] = { .type = NLA_NESTED }, + [NL80211_STA_INFO_TX_BITRATE] = { .type = NLA_NESTED }, + [NL80211_STA_INFO_LLID] = { .type = NLA_U16 }, + [NL80211_STA_INFO_PLID] = { .type = NLA_U16 }, + [NL80211_STA_INFO_PLINK_STATE] = { .type = NLA_U8 }, + }; + + nla_parse (tb, NL80211_ATTR_MAX, genlmsg_attrdata (gnlh, 0), + genlmsg_attrlen (gnlh, 0), NULL); + + if (!tb[NL80211_ATTR_STA_INFO]) { + g_warning ("sta stats missing!"); + return NL_SKIP; + } + if (nla_parse_nested (sinfo, NL80211_STA_INFO_MAX, + tb[NL80211_ATTR_STA_INFO], + stats_policy)) { + g_warning ("failed to parse nested attributes!\n"); + return NL_SKIP; + } + + if (sinfo[NL80211_STA_INFO_RX_BYTES] && sinfo[NL80211_STA_INFO_RX_PACKETS]) { + guint32 rx_bytes = nla_get_u32 (sinfo[NL80211_STA_INFO_RX_BYTES]); + devinfo->rx = (guint64) rx_bytes; + g_debug ("RX: %" G_GUINT32_FORMAT " bytes (%" G_GUINT32_FORMAT " packets)", + rx_bytes, + nla_get_u32 (sinfo[NL80211_STA_INFO_RX_PACKETS])); + } + if (sinfo[NL80211_STA_INFO_TX_BYTES] && sinfo[NL80211_STA_INFO_TX_PACKETS]) { + guint32 tx_bytes = nla_get_u32 (sinfo[NL80211_STA_INFO_TX_BYTES]); + devinfo->tx = (guint64) tx_bytes; + g_debug ("TX: %" G_GUINT32_FORMAT " bytes (%" G_GUINT32_FORMAT " packets)", + tx_bytes, + nla_get_u32 (sinfo[NL80211_STA_INFO_TX_PACKETS])); + } + if (sinfo[NL80211_STA_INFO_SIGNAL]) { + int8_t dBm = (int8_t)nla_get_u8 (sinfo[NL80211_STA_INFO_SIGNAL]); + g_debug ("signal: %d dBm", dBm); + devinfo->rssi = dBm; + devinfo->qual = CLAMP (2 * ((int)dBm + 100), 1, 100); + } + if (sinfo[NL80211_STA_INFO_RX_BITRATE]) { + char buf[100]; + parse_bitrate (sinfo[NL80211_STA_INFO_RX_BITRATE], buf, sizeof (buf)); + g_debug ("rx bitrate: %s", buf); + devinfo->rx_bitrate = g_strdup (buf); + } + if (sinfo[NL80211_STA_INFO_TX_BITRATE]) { + char buf[100]; + parse_bitrate (sinfo[NL80211_STA_INFO_TX_BITRATE], buf, sizeof (buf)); + g_debug ("tx bitrate: %s", buf); + devinfo->tx_bitrate = g_strdup (buf); + } + if (sinfo[NL80211_STA_INFO_CONNECTED_TIME]) { + devinfo->connected_time = nla_get_u32 (sinfo[NL80211_STA_INFO_CONNECTED_TIME]); + g_debug ("connected time: %" G_GUINT32_FORMAT " seconds", devinfo->connected_time); + } + + return NL_SKIP; +} + +static char * +channel_width_name (enum nl80211_chan_width width) +{ + switch (width) { + case NL80211_CHAN_WIDTH_20_NOHT: + return _("20 MHz (no HT)"); + case NL80211_CHAN_WIDTH_20: + return _("20 MHz"); + case NL80211_CHAN_WIDTH_40: + return _("40 MHz"); + case NL80211_CHAN_WIDTH_80: + return _("80 MHz"); + case NL80211_CHAN_WIDTH_80P80: + return _("80+80 MHz"); + case NL80211_CHAN_WIDTH_160: + return _("160 MHz"); + case NL80211_CHAN_WIDTH_5: + return _("5 MHz"); + case NL80211_CHAN_WIDTH_10: + return _("10 MHz"); + default: + return _("unknown"); + } +} + +static int +ieee80211_frequency_to_channel (int freq) +{ + /* see 802.11-2007 17.3.8.3.2 and Annex J */ + if (freq == 2484) + return 14; + else if (freq < 2484) + return (freq - 2407) / 5; + else if (freq >= 4910 && freq <= 4980) + return (freq - 4000) / 5; + else if (freq <= 45000) /* DMG band lower limit */ + return (freq - 5000) / 5; + else if (freq >= 58320 && freq <= 64800) + return (freq - 56160) / 2160; + else + return 0; +} + +static int +iface_cb (struct nl_msg *msg, + void *arg) +{ + DevInfo *devinfo = (DevInfo*) arg; + struct genlmsghdr *gnlh = nlmsg_data (nlmsg_hdr (msg)); + struct nlattr *tb_msg[NL80211_ATTR_MAX + 1]; + + nla_parse (tb_msg, NL80211_ATTR_MAX, genlmsg_attrdata (gnlh, 0), + genlmsg_attrlen(gnlh, 0), NULL); + + if (tb_msg[NL80211_ATTR_MAC]) { + int len = MIN(ETH_ALEN, nla_len (tb_msg[NL80211_ATTR_MAC])); + memcpy (devinfo->hwaddr, nla_data (tb_msg[NL80211_ATTR_MAC]), len); + } + + if (tb_msg[NL80211_ATTR_SSID]) { + char buf[G_MAXUINT8]; + int len = nla_len (tb_msg[NL80211_ATTR_SSID]); + memcpy (buf, nla_data (tb_msg[NL80211_ATTR_SSID]), len); + buf [len] = '\0'; + devinfo->essid = g_strescape (buf, NULL); + g_debug ("ssid: %s", buf); + } + + if (tb_msg[NL80211_ATTR_WIPHY_FREQ]) { + uint32_t freq = nla_get_u32 (tb_msg[NL80211_ATTR_WIPHY_FREQ]); + char buf[100]; + char *pos = buf; + + pos += sprintf (pos, _("%d (%d MHz)"), + ieee80211_frequency_to_channel (freq), freq); + + if (tb_msg[NL80211_ATTR_CHANNEL_WIDTH]) + sprintf (pos, _(", width: %s"), + channel_width_name (nla_get_u32 (tb_msg[NL80211_ATTR_CHANNEL_WIDTH]))); + + devinfo->channel = g_strdup (buf); + } + + return NL_SKIP; +} + +void +get_wireless_info (DevInfo *devinfo) +{ + struct nl80211_state nlstate = {.sock = NULL, .nl80211_id = -1}; + int err, ret; + struct nl_msg *msg; + signed long long devidx = 0; + + err = nl80211_init (&nlstate); + if (err || (nlstate.nl80211_id < 0)) { + g_warning ("failed to init netlink"); + return; + } + + devidx = if_nametoindex (devinfo->name); + + /* Get MAC, SSID & channel info from interface message */ + msg = nlmsg_alloc (); + if (!msg) { + g_warning ("failed to allocate netlink message"); + goto cleanup; + } + genlmsg_put (msg, 0, 0, nlstate.nl80211_id, 0, NLM_F_DUMP, NL80211_CMD_GET_INTERFACE, 0); + /* Add message attribute, which interface to use */ + nla_put_u32 (msg, NL80211_ATTR_IFINDEX, devidx); + /* Add the callback */ + nl_socket_modify_cb (nlstate.sock, NL_CB_VALID, NL_CB_CUSTOM, iface_cb, devinfo); + /* Send the message */ + ret = nl_send_auto (nlstate.sock, msg); + g_debug ("NL80211_CMD_GET_INTERFACE sent %d bytes to the kernel", ret); + /* Retrieve the kernel's answer */ + ret = nl_recvmsgs_default (nlstate.sock); + nlmsg_free (msg); + if (ret < 0) { + g_warning ("failed to recive netlink message"); + } + + if (!devinfo->running) + goto cleanup; + + /* Get station MAC from scan message */ + msg = nlmsg_alloc (); + if (!msg) { + g_warning ("failed to allocate netlink message"); + goto cleanup; + } + genlmsg_put (msg, 0, 0, nlstate.nl80211_id, 0, NLM_F_DUMP, NL80211_CMD_GET_SCAN, 0); + /* Add message attribute, which interface to use */ + nla_put_u32 (msg, NL80211_ATTR_IFINDEX, devidx); + /* Add the callback */ + nl_socket_modify_cb (nlstate.sock, NL_CB_VALID, NL_CB_CUSTOM, scan_cb, devinfo); + /* Send the message */ + ret = nl_send_auto (nlstate.sock, msg); + g_debug ("NL80211_CMD_GET_SCAN sent %d bytes to the kernel", ret); + /* Retrieve the kernel's answer */ + ret = nl_recvmsgs_default (nlstate.sock); + nlmsg_free (msg); + if (ret < 0) { + g_warning ("failed to recive netlink message"); + goto cleanup; + } + + if (!devinfo->running) + goto cleanup; + + /* Get in/out bitrate/rate/total, siganl quality from station message */ + msg = nlmsg_alloc (); + if (!msg) { + g_warning ("failed to allocate netlink message"); + goto cleanup; + } + genlmsg_put (msg, 0, 0, nlstate.nl80211_id, 0, NLM_F_DUMP, NL80211_CMD_GET_STATION, 0); + /* Add message attribute, which interface to use */ + nla_put (msg, NL80211_ATTR_MAC, ETH_ALEN, devinfo->station_mac_addr); + nla_put_u32 (msg, NL80211_ATTR_IFINDEX, devidx); + /* Add the callback */ + nl_socket_modify_cb (nlstate.sock, NL_CB_VALID, NL_CB_CUSTOM, station_cb, devinfo); + /* Send the message */ + ret = nl_send_auto (nlstate.sock, msg); + g_debug ("NL80211_CMD_GET_STATION sent %d bytes to the kernel", ret); + /* Retrieve the kernel's answer */ + ret = nl_recvmsgs_default (nlstate.sock); + nlmsg_free (msg); + if (ret < 0) { + g_warning ("failed to recive netlink message"); + } + + cleanup: + nl80211_cleanup (&nlstate); +} +#endif /* HAVE_NL */ diff --git a/netspeed/src/backend.h b/netspeed/src/backend.h index 7abccdf2..3ad13e94 100644 --- a/netspeed/src/backend.h +++ b/netspeed/src/backend.h @@ -37,6 +37,10 @@ #define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ #define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ +#define ETH_ALEN 8 +#define ETH_LEN 20 +#define MAX_FORMAT_SIZE 15 + /* Different types of interfaces */ typedef enum { @@ -57,16 +61,24 @@ typedef struct char *name; char *ip; char *netmask; - char *hwaddr; + guint8 hwaddr[ETH_ALEN]; char *ptpip; char *ipv6; char *essid; gboolean up, running; guint64 tx, rx; int qual; - char *tx_rate; - char *rx_rate; - char *sum_rate; + char rx_rate[MAX_FORMAT_SIZE]; + char tx_rate[MAX_FORMAT_SIZE]; + char sum_rate[MAX_FORMAT_SIZE]; +#ifdef HAVE_NL + int rssi; + char *tx_bitrate; + char *rx_bitrate; + char *channel; + guint32 connected_time; + unsigned char station_mac_addr[ETH_ALEN]; +#endif /* HAVE_NL */ } DevInfo; GList* @@ -90,6 +102,6 @@ get_device_info(const char *device, DevInfo *info); gboolean compare_device_info(const DevInfo *a, const DevInfo *b); -void +void get_wireless_info (DevInfo *devinfo); #endif /* _BACKEND_H */ diff --git a/netspeed/src/ieee80211.h b/netspeed/src/ieee80211.h new file mode 100644 index 00000000..87456084 --- /dev/null +++ b/netspeed/src/ieee80211.h @@ -0,0 +1,61 @@ +#ifndef __IEEE80211 +#define __IEEE80211 + +/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */ +#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03 +#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C + +#define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002 +#define IEEE80211_HT_CAP_SGI_40 0x0040 +#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 + +#define IEEE80211_HT_MCS_MASK_LEN 10 + +/** + * struct ieee80211_mcs_info - MCS information + * @rx_mask: RX mask + * @rx_highest: highest supported RX rate. If set represents + * the highest supported RX data rate in units of 1 Mbps. + * If this field is 0 this value should not be used to + * consider the highest RX data rate supported. + * @tx_params: TX parameters + */ +struct ieee80211_mcs_info { + __u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN]; + __u16 rx_highest; + __u8 tx_params; + __u8 reserved[3]; +} __attribute__ ((packed)); + + +/** + * struct ieee80211_ht_cap - HT capabilities + * + * This structure is the "HT capabilities element" as + * described in 802.11n D5.0 7.3.2.57 + */ +struct ieee80211_ht_cap { + __u16 cap_info; + __u8 ampdu_params_info; + + /* 16 bytes MCS information */ + struct ieee80211_mcs_info mcs; + + __u16 extended_ht_cap_info; + __u32 tx_BF_cap_info; + __u8 antenna_selection_info; +} __attribute__ ((packed)); + +struct ieee80211_vht_mcs_info { + __u16 rx_vht_mcs; + __u16 rx_highest; + __u16 tx_vht_mcs; + __u16 tx_highest; +} __attribute__ ((packed)); + +struct ieee80211_vht_cap { + __u32 cap_info; + struct ieee80211_vht_mcs_info mcs; +} __attribute__ ((packed)); + +#endif /* __IEEE80211 */ diff --git a/netspeed/src/netspeed.c b/netspeed/src/netspeed.c index 6831fe94..585c8093 100644 --- a/netspeed/src/netspeed.c +++ b/netspeed/src/netspeed.c @@ -99,6 +99,9 @@ typedef struct GdkRGBA out_color; int width; +#ifdef HAVE_NL + GtkWidget *connected_time_text; +#endif GtkWidget *inbytes_text, *outbytes_text; GtkDialog *details, *settings; GtkDrawingArea *drawingarea; @@ -394,12 +397,12 @@ icon_theme_changed_cb(GtkIconTheme *icon_theme, gpointer user_data) change_icons(user_data); } -/* Converts a number of bytes into a human - * readable string - in [M/k]bytes[/s] - * The string has to be freed - */ -static char* -bytes_to_string(double bytes, gboolean per_sec, gboolean bits, gboolean shortened) +static void +netspeed_format_size (gchar *out, + double bytes, + gboolean per_sec, + gboolean bits, + gboolean shortened) { const char *format; const char *unit; @@ -453,9 +456,20 @@ bytes_to_string(double bytes, gboolean per_sec, gboolean bits, gboolean shortene unit = bits ? N_("Mb") : N_("MiB"); } - return g_strdup_printf(format, bytes, gettext(unit)); + g_snprintf (out, MAX_FORMAT_SIZE, format, bytes, gettext(unit)); } +/* Converts a number of bytes into a human + * readable string - in [M/k]bytes[/s] + * The string has to be freed + */ +static char* +bytes_to_string(double bytes, gboolean per_sec, gboolean bits, gboolean shortened) +{ + char res[MAX_FORMAT_SIZE]; + netspeed_format_size (res, bytes, per_sec, bits, shortened); + return g_strdup (res); +} /* Redraws the graph drawingarea * Some really black magic is going on in here ;-) @@ -591,6 +605,38 @@ search_for_up_if(MateNetspeedApplet *applet) free_devices_list(devices); } +static char * +format_time (guint32 sec) +{ + char *res; + char *m, *s; + int seconds; + int minutes; + int hours; + + if (sec < 60) + return g_strdup_printf (ngettext ("%'" G_GUINT32_FORMAT " second","%'" G_GUINT32_FORMAT " seconds", sec), sec); + + hours = (sec/3600); + minutes = (sec -(3600*hours))/60; + seconds = (sec -(3600*hours)-(minutes*60)); + + m = g_strdup_printf (ngettext ("%'d minute", "%'d minutes", minutes), minutes); + s = g_strdup_printf (ngettext ("%'d secon", "%'d seconds", seconds), seconds); + if (sec < 60*60) { + res = g_strconcat (m, ", ", s, NULL); + } else { + char *h; + h = g_strdup_printf (ngettext ("%'d hour", "%'d hours", hours), hours); + res = g_strconcat (h, ", ", m, ", ", s, NULL); + g_free (h); + } + g_free (m); + g_free (s); + + return res; +} + /* Here happens the really interesting stuff */ static void update_applet(MateNetspeedApplet *applet) @@ -647,13 +693,13 @@ update_applet(MateNetspeedApplet *applet) applet->max_graph = MAX(inrate, applet->max_graph); applet->max_graph = MAX(outrate, applet->max_graph); - applet->devinfo.rx_rate = bytes_to_string(inrate, TRUE, applet->show_bits, applet->short_unit); - applet->devinfo.tx_rate = bytes_to_string(outrate, TRUE, applet->show_bits, applet->short_unit); - applet->devinfo.sum_rate = bytes_to_string(inrate + outrate, TRUE, applet->show_bits, applet->short_unit); + netspeed_format_size (applet->devinfo.rx_rate, inrate, TRUE, applet->show_bits, applet->short_unit); + netspeed_format_size (applet->devinfo.tx_rate, outrate, TRUE, applet->show_bits, applet->short_unit); + netspeed_format_size (applet->devinfo.sum_rate, inrate + outrate, TRUE, applet->show_bits, applet->short_unit); } else { - applet->devinfo.rx_rate = g_strdup(""); - applet->devinfo.tx_rate = g_strdup(""); - applet->devinfo.sum_rate = g_strdup(""); + applet->devinfo.rx_rate[0] = '\0'; + applet->devinfo.tx_rate[0] = '\0'; + applet->devinfo.sum_rate[0] = '\0'; applet->in_graph[applet->index_graph] = 0; applet->out_graph[applet->index_graph] = 0; } @@ -675,26 +721,42 @@ update_applet(MateNetspeedApplet *applet) gtk_progress_bar_set_text (GTK_PROGRESS_BAR (applet->signalbar), text); g_free(text); } +#ifdef HAVE_NL + /* Refresh the value of Conected Time */ + if (applet->connected_time_text) { + char *text; + text = format_time (applet->devinfo.connected_time); + gtk_label_set_text (GTK_LABEL (applet->connected_time_text), + applet->devinfo.connected_time > 0 ? text : _("na")); + g_free (text); + } +#endif } update_tooltip(applet); /* Refresh the text of the labels and tooltip */ if (applet->show_sum) { - gtk_label_set_markup(GTK_LABEL(applet->sum_label), applet->devinfo.sum_rate); + gtk_label_set_text (GTK_LABEL (applet->sum_label), applet->devinfo.sum_rate); } else { - gtk_label_set_markup(GTK_LABEL(applet->in_label), applet->devinfo.rx_rate); - gtk_label_set_markup(GTK_LABEL(applet->out_label), applet->devinfo.tx_rate); + gtk_label_set_text (GTK_LABEL (applet->in_label), applet->devinfo.rx_rate); + gtk_label_set_text (GTK_LABEL (applet->out_label), applet->devinfo.tx_rate); } /* Refresh the values of the Infodialog */ if (applet->inbytes_text) { - inbytes = bytes_to_string((double)applet->devinfo.rx, FALSE, FALSE, FALSE); + if (applet->show_bits) + inbytes = g_format_size_full (applet->devinfo.rx*8, G_FORMAT_SIZE_IEC_UNITS | G_FORMAT_SIZE_BITS); + else + inbytes = g_format_size_full (applet->devinfo.rx, G_FORMAT_SIZE_IEC_UNITS); gtk_label_set_text(GTK_LABEL(applet->inbytes_text), inbytes); g_free(inbytes); } if (applet->outbytes_text) { - outbytes = bytes_to_string((double)applet->devinfo.tx, FALSE, FALSE, FALSE); + if (applet->show_bits) + outbytes = g_format_size_full (applet->devinfo.tx*8, G_FORMAT_SIZE_IEC_UNITS | G_FORMAT_SIZE_BITS); + else + outbytes = g_format_size_full (applet->devinfo.tx, G_FORMAT_SIZE_IEC_UNITS); gtk_label_set_text(GTK_LABEL(applet->outbytes_text), outbytes); g_free(outbytes); } @@ -1056,11 +1118,28 @@ info_response_cb (GtkDialog *dialog, gint id, MateNetspeedApplet *applet) applet->details = NULL; applet->inbytes_text = NULL; +#ifdef HAVE_NL + applet->connected_time_text = NULL; +#endif applet->outbytes_text = NULL; applet->drawingarea = NULL; applet->signalbar = NULL; } +static char* +mac_addr_n2a (const unsigned char *hw) +{ + if (hw[6] || hw[7]) { + return g_strdup_printf ("%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x", + hw[0], hw[1], hw[2], hw[3], + hw[4], hw[5], hw[6], hw[7]); + } else { + return g_strdup_printf ("%02x:%02x:%02x:%02x:%02x:%02x", + hw[0], hw[1], hw[2], + hw[3], hw[4], hw[5]); + } +} + /* Creates the details dialog */ static void @@ -1076,7 +1155,7 @@ showinfo_cb(GtkAction *action, gpointer data) GtkWidget *inbytes_label, *outbytes_label; GtkWidget *incolor_sel, *incolor_label; GtkWidget *outcolor_sel, *outcolor_label; - char *title; + char *text; g_assert(applet); @@ -1086,14 +1165,14 @@ showinfo_cb(GtkAction *action, gpointer data) return; } - title = g_strdup_printf(_("Device Details for %s"), applet->devinfo.name); - applet->details = GTK_DIALOG(gtk_dialog_new_with_buttons(title, + text = g_strdup_printf(_("Device Details for %s"), applet->devinfo.name); + applet->details = GTK_DIALOG(gtk_dialog_new_with_buttons(text, NULL, GTK_DIALOG_DESTROY_WITH_PARENT, "gtk-close", GTK_RESPONSE_ACCEPT, "gtk-help", GTK_RESPONSE_HELP, NULL)); - g_free(title); + g_free (text); gtk_dialog_set_default_response(GTK_DIALOG(applet->details), GTK_RESPONSE_CLOSE); @@ -1137,7 +1216,13 @@ showinfo_cb(GtkAction *action, gpointer data) ip_text = gtk_label_new(applet->devinfo.ip ? applet->devinfo.ip : _("none")); netmask_text = gtk_label_new(applet->devinfo.netmask ? applet->devinfo.netmask : _("none")); - hwaddr_text = gtk_label_new(applet->devinfo.hwaddr ? applet->devinfo.hwaddr : _("none")); + if (applet->devinfo.type != DEV_LO) { + text = mac_addr_n2a (applet->devinfo.hwaddr); + hwaddr_text = gtk_label_new (text); + g_free (text); + } else { + hwaddr_text = gtk_label_new (_("none")); + } ptpip_text = gtk_label_new(applet->devinfo.ptpip ? applet->devinfo.ptpip : _("none")); applet->inbytes_text = gtk_label_new("0 byte"); applet->outbytes_text = gtk_label_new("0 byte"); @@ -1206,8 +1291,14 @@ showinfo_cb(GtkAction *action, gpointer data) GtkWidget *signal_label; GtkWidget *essid_label; GtkWidget *essid_text; +#ifdef HAVE_NL + GtkWidget *station_label; + GtkWidget *station_text; + GtkWidget *channel_label; + GtkWidget *channel_text; + GtkWidget *connected_time_label; +#endif /* HAVE_NL */ float quality; - char *text; /* _maybe_ we can add the encrypted icon between the essid and the signal bar. */ @@ -1224,7 +1315,25 @@ showinfo_cb(GtkAction *action, gpointer data) signal_label = gtk_label_new (_("Signal Strength:")); essid_label = gtk_label_new (_("ESSID:")); - essid_text = gtk_label_new (applet->devinfo.essid); + essid_text = gtk_label_new (applet->devinfo.essid ? applet->devinfo.essid : _("none")); + +#ifdef HAVE_NL + station_label = gtk_label_new (_("Station:")); + if (applet->devinfo.running) { + text = mac_addr_n2a (applet->devinfo.station_mac_addr); + station_text = gtk_label_new (text); + g_free (text); + } else { + station_text = gtk_label_new (_("unknown")); + } + channel_label = gtk_label_new (_("Channel:")); + channel_text = gtk_label_new (applet->devinfo.channel ? applet->devinfo.channel : _("unknown")); + connected_time_label = gtk_label_new (_("Connected Time:")); + + text = format_time (applet->devinfo.connected_time); + applet->connected_time_text = gtk_label_new (applet->devinfo.connected_time > 0 ? text : _("na")); + g_free (text); +#endif /* HAVE_NL */ gtk_label_set_xalign (GTK_LABEL (signal_label), 0.0f); gtk_label_set_yalign (GTK_LABEL (signal_label), 0.5f); @@ -1233,11 +1342,33 @@ showinfo_cb(GtkAction *action, gpointer data) gtk_label_set_xalign (GTK_LABEL (essid_text), 0.0f); gtk_label_set_yalign (GTK_LABEL (essid_text), 0.5f); gtk_label_set_selectable (GTK_LABEL (essid_text), TRUE); +#ifdef HAVE_NL + gtk_label_set_xalign (GTK_LABEL (station_label), 0.0f); + gtk_label_set_yalign (GTK_LABEL (station_label), 0.5f); + gtk_label_set_xalign (GTK_LABEL (station_text), 0.0f); + gtk_label_set_yalign (GTK_LABEL (station_text), 0.5f); + gtk_label_set_xalign (GTK_LABEL (channel_text), 0.0f); + gtk_label_set_yalign (GTK_LABEL (channel_text), 0.5f); + gtk_label_set_xalign (GTK_LABEL (channel_label), 0.0f); + gtk_label_set_yalign (GTK_LABEL (channel_label), 0.5f); + gtk_label_set_xalign (GTK_LABEL (connected_time_label), 0.0f); + gtk_label_set_yalign (GTK_LABEL (connected_time_label), 0.5f); + gtk_label_set_xalign (GTK_LABEL (applet->connected_time_text), 0.0f); + gtk_label_set_yalign (GTK_LABEL (applet->connected_time_text), 0.5f); +#endif /* HAVE_NL */ gtk_grid_attach (GTK_GRID (grid), signal_label, 2, 4, 1, 1); gtk_grid_attach (GTK_GRID (grid), GTK_WIDGET (applet->signalbar), 3, 4, 1, 1); gtk_grid_attach (GTK_GRID (grid), essid_label, 0, 4, 3, 1); gtk_grid_attach (GTK_GRID (grid), essid_text, 1, 4, 3, 1); +#ifdef HAVE_NL + gtk_grid_attach (GTK_GRID (grid), station_label, 0, 5, 1, 1); + gtk_grid_attach (GTK_GRID (grid), station_text, 1, 5, 1, 1); + gtk_grid_attach (GTK_GRID (grid), channel_label, 2, 5, 1, 1); + gtk_grid_attach (GTK_GRID (grid), channel_text, 3, 5, 1, 1); + gtk_grid_attach (GTK_GRID (grid), connected_time_label, 0, 6, 1, 1); + gtk_grid_attach (GTK_GRID (grid), applet->connected_time_text, 1, 6, 3, 1); +#endif /* HAVE_NL */ } g_signal_connect(G_OBJECT(applet->drawingarea), "draw", @@ -1421,14 +1552,22 @@ update_tooltip(MateNetspeedApplet* applet) applet->devinfo.sum_rate ); } +#ifdef HAVE_NL if (applet->devinfo.type == DEV_WIRELESS) - g_string_append_printf( - tooltip, - _("\nESSID: %s\nStrength: %d %%"), - applet->devinfo.essid ? applet->devinfo.essid : _("unknown"), - applet->devinfo.qual - ); - + g_string_append_printf (tooltip, + _("\nESSID: %s\nRSSI: %d dBm\nRX Bitrate: %s\nTX Bitrate: %s"), + applet->devinfo.essid ? applet->devinfo.essid : _("unknown"), + applet->devinfo.rssi, + applet->devinfo.rx_bitrate, + applet->devinfo.tx_bitrate); +#endif /* HAVE_NL */ +#ifdef HAVE_IW + if (applet->devinfo.type == DEV_WIRELESS) + g_string_append_printf (tooltip, + _("\nESSID: %s\nStrength: %d %%"), + applet->devinfo.essid ? applet->devinfo.essid : _("unknown"), + applet->devinfo.qual); +#endif /* HAVE_IW */ } gtk_widget_set_tooltip_text(GTK_WIDGET(applet->applet), tooltip->str); diff --git a/netspeed/src/nl80211.h b/netspeed/src/nl80211.h new file mode 100644 index 00000000..beee59c8 --- /dev/null +++ b/netspeed/src/nl80211.h @@ -0,0 +1,6552 @@ +#ifndef __LINUX_NL80211_H +#define __LINUX_NL80211_H +/* + * 802.11 netlink interface public header + * + * Copyright 2006-2010 Johannes Berg <[email protected]> + * Copyright 2008 Michael Wu <[email protected]> + * Copyright 2008 Luis Carlos Cobo <[email protected]> + * Copyright 2008 Michael Buesch <[email protected]> + * Copyright 2008, 2009 Luis R. Rodriguez <[email protected]> + * Copyright 2008 Jouni Malinen <[email protected]> + * Copyright 2008 Colin McCabe <[email protected]> + * Copyright 2015-2017 Intel Deutschland GmbH + * Copyright (C) 2018-2019 Intel Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/* + * This header file defines the userspace API to the wireless stack. Please + * be careful not to break things - i.e. don't move anything around or so + * unless you can demonstrate that it breaks neither API nor ABI. + * + * Additions to the API should be accompanied by actual implementations in + * an upstream driver, so that example implementations exist in case there + * are ever concerns about the precise semantics of the API or changes are + * needed, and to ensure that code for dead (no longer implemented) API + * can actually be identified and removed. + * Nonetheless, semantics should also be documented carefully in this file. + */ + +#include <linux/types.h> + +#define NL80211_GENL_NAME "nl80211" + +#define NL80211_MULTICAST_GROUP_CONFIG "config" +#define NL80211_MULTICAST_GROUP_SCAN "scan" +#define NL80211_MULTICAST_GROUP_REG "regulatory" +#define NL80211_MULTICAST_GROUP_MLME "mlme" +#define NL80211_MULTICAST_GROUP_VENDOR "vendor" +#define NL80211_MULTICAST_GROUP_NAN "nan" +#define NL80211_MULTICAST_GROUP_TESTMODE "testmode" + +#define NL80211_EDMG_BW_CONFIG_MIN 4 +#define NL80211_EDMG_BW_CONFIG_MAX 15 +#define NL80211_EDMG_CHANNELS_MIN 1 +#define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */ + +/** + * DOC: Station handling + * + * Stations are added per interface, but a special case exists with VLAN + * interfaces. When a station is bound to an AP interface, it may be moved + * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). + * The station is still assumed to belong to the AP interface it was added + * to. + * + * Station handling varies per interface type and depending on the driver's + * capabilities. + * + * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS + * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows: + * - a setup station entry is added, not yet authorized, without any rate + * or capability information, this just exists to avoid race conditions + * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid + * to add rate and capability information to the station and at the same + * time mark it authorized. + * - %NL80211_TDLS_ENABLE_LINK is then used + * - after this, the only valid operation is to remove it by tearing down + * the TDLS link (%NL80211_TDLS_DISABLE_LINK) + * + * TODO: need more info for other interface types + */ + +/** + * DOC: Frame transmission/registration support + * + * Frame transmission and registration support exists to allow userspace + * management entities such as wpa_supplicant react to management frames + * that are not being handled by the kernel. This includes, for example, + * certain classes of action frames that cannot be handled in the kernel + * for various reasons. + * + * Frame registration is done on a per-interface basis and registrations + * cannot be removed other than by closing the socket. It is possible to + * specify a registration filter to register, for example, only for a + * certain type of action frame. In particular with action frames, those + * that userspace registers for will not be returned as unhandled by the + * driver, so that the registered application has to take responsibility + * for doing that. + * + * The type of frame that can be registered for is also dependent on the + * driver and interface type. The frame types are advertised in wiphy + * attributes so applications know what to expect. + * + * NOTE: When an interface changes type while registrations are active, + * these registrations are ignored until the interface type is + * changed again. This means that changing the interface type can + * lead to a situation that couldn't otherwise be produced, but + * any such registrations will be dormant in the sense that they + * will not be serviced, i.e. they will not receive any frames. + * + * Frame transmission allows userspace to send for example the required + * responses to action frames. It is subject to some sanity checking, + * but many frames can be transmitted. When a frame was transmitted, its + * status is indicated to the sending socket. + * + * For more technical details, see the corresponding command descriptions + * below. + */ + +/** + * DOC: Virtual interface / concurrency capabilities + * + * Some devices are able to operate with virtual MACs, they can have + * more than one virtual interface. The capability handling for this + * is a bit complex though, as there may be a number of restrictions + * on the types of concurrency that are supported. + * + * To start with, each device supports the interface types listed in + * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the + * types there no concurrency is implied. + * + * Once concurrency is desired, more attributes must be observed: + * To start with, since some interface types are purely managed in + * software, like the AP-VLAN type in mac80211 for example, there's + * an additional list of these, they can be added at any time and + * are only restricted by some semantic restrictions (e.g. AP-VLAN + * cannot be added without a corresponding AP interface). This list + * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. + * + * Further, the list of supported combinations is exported. This is + * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically, + * it exports a list of "groups", and at any point in time the + * interfaces that are currently active must fall into any one of + * the advertised groups. Within each group, there are restrictions + * on the number of interfaces of different types that are supported + * and also the number of different channels, along with potentially + * some other restrictions. See &enum nl80211_if_combination_attrs. + * + * All together, these attributes define the concurrency of virtual + * interfaces that a given device supports. + */ + +/** + * DOC: packet coalesce support + * + * In most cases, host that receives IPv4 and IPv6 multicast/broadcast + * packets does not do anything with these packets. Therefore the + * reception of these unwanted packets causes unnecessary processing + * and power consumption. + * + * Packet coalesce feature helps to reduce number of received interrupts + * to host by buffering these packets in firmware/hardware for some + * predefined time. Received interrupt will be generated when one of the + * following events occur. + * a) Expiration of hardware timer whose expiration time is set to maximum + * coalescing delay of matching coalesce rule. + * b) Coalescing buffer in hardware reaches it's limit. + * c) Packet doesn't match any of the configured coalesce rules. + * + * User needs to configure following parameters for creating a coalesce + * rule. + * a) Maximum coalescing delay + * b) List of packet patterns which needs to be matched + * c) Condition for coalescence. pattern 'match' or 'no match' + * Multiple such rules can be created. + */ + +/** + * DOC: WPA/WPA2 EAPOL handshake offload + * + * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers + * can indicate they support offloading EAPOL handshakes for WPA/WPA2 + * preshared key authentication. In %NL80211_CMD_CONNECT the preshared + * key should be specified using %NL80211_ATTR_PMK. Drivers supporting + * this offload may reject the %NL80211_CMD_CONNECT when no preshared + * key material is provided, for example when that driver does not + * support setting the temporal keys through %CMD_NEW_KEY. + * + * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be + * set by drivers indicating offload support of the PTK/GTK EAPOL + * handshakes during 802.1X authentication. In order to use the offload + * the %NL80211_CMD_CONNECT should have %NL80211_ATTR_WANT_1X_4WAY_HS + * attribute flag. Drivers supporting this offload may reject the + * %NL80211_CMD_CONNECT when the attribute flag is not present. + * + * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK + * using %NL80211_CMD_SET_PMK. For offloaded FT support also + * %NL80211_ATTR_PMKR0_NAME must be provided. + */ + +/** + * DOC: FILS shared key authentication offload + * + * FILS shared key authentication offload can be advertized by drivers by + * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support + * FILS shared key authentication offload should be able to construct the + * authentication and association frames for FILS shared key authentication and + * eventually do a key derivation as per IEEE 802.11ai. The below additional + * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in + * %NL80211_CMD_UPDATE_CONNECT_PARAMS. + * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai + * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai + * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message + * %NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK + * rIK should be used to generate an authentication tag on the ERP message and + * rMSK should be used to derive a PMKSA. + * rIK, rMSK should be generated and keyname_nai, sequence number should be used + * as specified in IETF RFC 6696. + * + * When FILS shared key authentication is completed, driver needs to provide the + * below additional parameters to userspace, which can be either after setting + * up a connection or after roaming. + * %NL80211_ATTR_FILS_KEK - used for key renewal + * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges + * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated + * %Nl80211_ATTR_PMK - used to update PMKSA cache in userspace + * The PMKSA can be maintained in userspace persistently so that it can be used + * later after reboots or wifi turn off/on also. + * + * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS + * capable AP supporting PMK caching. It specifies the scope within which the + * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and + * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based + * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with + * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to + * use in a FILS shared key connection with PMKSA caching. + */ + +/** + * DOC: SAE authentication offload + * + * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they + * support offloading SAE authentication for WPA3-Personal networks. In + * %NL80211_CMD_CONNECT the password for SAE should be specified using + * %NL80211_ATTR_SAE_PASSWORD. + */ + +/** + * enum nl80211_commands - supported nl80211 commands + * + * @NL80211_CMD_UNSPEC: unspecified command to catch errors + * + * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request + * to get a list of all present wiphys. + * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or + * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the + * attributes determining the channel width; this is used for setting + * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, + * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, + * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. + * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL + * instead, the support here is for backward compatibility only. + * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request + * or rename notification. Has attributes %NL80211_ATTR_WIPHY and + * %NL80211_ATTR_WIPHY_NAME. + * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes + * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. + * + * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; + * either a dump request for all interfaces or a specific get with a + * single %NL80211_ATTR_IFINDEX is supported. + * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. + * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response + * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, + * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also + * be sent from userspace to request creation of a new virtual interface, + * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and + * %NL80211_ATTR_IFNAME. + * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from + * userspace to request deletion of a virtual interface, then requires + * attribute %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified + * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. + * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, + * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. + * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, + * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, + * and %NL80211_ATTR_KEY_SEQ attributes. + * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX + * or %NL80211_ATTR_MAC. + * + * @NL80211_CMD_GET_BEACON: (not used) + * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface + * using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL + * attributes. For drivers that generate the beacon and probe responses + * internally, the following attributes must be provided: %NL80211_ATTR_IE, + * %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP. + * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters + * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that + * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, + * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, + * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, + * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, + * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, + * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, + * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. + * The channel to use can be set on the interface or be given using the + * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. + * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP + * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface + * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP + * + * @NL80211_CMD_GET_STATION: Get station attributes for station identified by + * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_STATION: Set station attributes for station identified by + * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the + * the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC + * or, if no MAC address given, all stations, on the interface identified + * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and + * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type + * of disconnection indication should be sent to the station + * (Deauthentication or Disassociation frame and reason code for that + * frame). + * + * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by + * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. + * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by + * %NL80211_ATTR_MAC. + * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the + * the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC + * or, if no MAC address given, all mesh paths, on the interface identified + * by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by + * %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set + * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device + * has a private regulatory domain, it will be returned. Otherwise, the + * global regdomain will be returned. + * A device will have a private regulatory domain if it uses the + * regulatory_hint() API. Even when a private regdomain is used the channel + * information will still be mended according to further hints from + * the regulatory core to help with compliance. A dump version of this API + * is now available which will returns the global regdomain as well as + * all private regdomains of present wiphys (for those that have it). + * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then + * its private regdomain is the only valid one for it. The regulatory + * core is not used to help with compliance in this case. + * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command + * after being queried by the kernel. CRDA replies by sending a regulatory + * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our + * current alpha2 if it found a match. It also provides + * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each + * regulatory rule is a nested set of attributes given by + * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and + * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by + * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and + * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. + * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain + * to the specified ISO/IEC 3166-1 alpha2 country code. The core will + * store this as a valid request and then query userspace for it. + * + * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the + * interface identified by %NL80211_ATTR_IFINDEX + * + * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the + * interface identified by %NL80211_ATTR_IFINDEX + * + * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The + * interface is identified with %NL80211_ATTR_IFINDEX and the management + * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be + * added to the end of the specified management frame is specified with + * %NL80211_ATTR_IE. If the command succeeds, the requested data will be + * added to all specified management frames generated by + * kernel/firmware/driver. + * Note: This command has been removed and it is only reserved at this + * point to avoid re-using existing command number. The functionality this + * command was planned for has been provided with cleaner design with the + * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, + * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, + * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. + * + * @NL80211_CMD_GET_SCAN: get scan results + * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters + * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the + * probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to + * specify a BSSID to scan for; if not included, the wildcard BSSID will + * be used. + * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to + * NL80211_CMD_GET_SCAN and on the "scan" multicast group) + * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, + * partial scan results may be available + * + * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain + * intervals and certain number of cycles, as specified by + * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is + * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified, + * scheduled scan will run in an infinite loop with the specified interval. + * These attributes are mutually exculsive, + * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if + * NL80211_ATTR_SCHED_SCAN_PLANS is defined. + * If for some reason scheduled scan is aborted by the driver, all scan + * plans are canceled (including scan plans that did not start yet). + * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) + * are passed, they are used in the probe requests. For + * broadcast, a broadcast SSID must be passed (ie. an empty + * string). If no SSID is passed, no probe requests are sent and + * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES, + * if passed, define which channels should be scanned; if not + * passed, all channels allowed for the current regulatory domain + * are used. Extra IEs can also be passed from the userspace by + * using the %NL80211_ATTR_IE attribute. The first cycle of the + * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY + * is supplied. If the device supports multiple concurrent scheduled + * scans, it will allow such when the caller provides the flag attribute + * %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it. + * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if + * scheduled scan is not running. The caller may assume that as soon + * as the call returns, it is safe to start a new scheduled scan again. + * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan + * results available. + * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has + * stopped. The driver may issue this event at any time during a + * scheduled scan. One reason for stopping the scan is if the hardware + * does not support starting an association or a normal scan while running + * a scheduled scan. This event is also sent when the + * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface + * is brought down while a scheduled scan was running. + * + * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation + * or noise level + * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to + * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) + * + * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC + * (for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK + * (PMK is used for PTKSA derivation in case of FILS shared key offload) or + * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID, + * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS + * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier + * advertized by a FILS capable AP identifying the scope of PMKSA in an + * ESS. + * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC + * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID, + * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS + * authentication. + * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. + * + * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain + * has been changed and provides details of the request information + * that caused the change such as who initiated the regulatory request + * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx + * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if + * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or + * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain + * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is + * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on + * to (%NL80211_ATTR_REG_ALPHA2). + * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon + * has been found while world roaming thus enabling active scan or + * any mode of operation that initiates TX (beacons) on a channel + * where we would not have been able to do either before. As an example + * if you are world roaming (regulatory domain set to world or if your + * driver is using a custom world roaming regulatory domain) and while + * doing a passive scan on the 5 GHz band you find an AP there (if not + * on a DFS channel) you will now be able to actively scan for that AP + * or use AP mode on your card on that same channel. Note that this will + * never be used for channels 1-11 on the 2 GHz band as they are always + * enabled world wide. This beacon hint is only sent if your device had + * either disabled active scanning or beaconing on a channel. We send to + * userspace the wiphy on which we removed a restriction from + * (%NL80211_ATTR_WIPHY) and the channel on which this occurred + * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) + * the beacon hint was processed. + * + * @NL80211_CMD_AUTHENTICATE: authentication request and notification. + * This command is used both as a command (request to authenticate) and + * as an event on the "mlme" multicast group indicating completion of the + * authentication process. + * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the + * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and + * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify + * the SSID (mainly for association, but is included in authentication + * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used + * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE + * is used to specify the authentication type. %NL80211_ATTR_IE is used to + * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) + * to be added to the frame. + * When used as an event, this reports reception of an Authentication + * frame in station and IBSS modes when the local MLME processed the + * frame, i.e., it was for the local STA and was received in correct + * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the + * MLME SAP interface (kernel providing MLME, userspace SME). The + * included %NL80211_ATTR_FRAME attribute contains the management frame + * (including both the header and frame body, but not FCS). This event is + * also used to indicate if the authentication attempt timed out. In that + * case the %NL80211_ATTR_FRAME attribute is replaced with a + * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which + * pending authentication timed out). + * @NL80211_CMD_ASSOCIATE: association request and notification; like + * NL80211_CMD_AUTHENTICATE but for Association and Reassociation + * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, + * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The + * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the + * request is for the initial association to an ESS (that attribute not + * included) or for reassociation within the ESS (that attribute is + * included). + * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like + * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to + * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication + * primitives). + * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like + * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to + * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). + * + * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael + * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the + * event includes %NL80211_ATTR_MAC to describe the source MAC address of + * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key + * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and + * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this + * event matches with MLME-MICHAELMICFAILURE.indication() primitive + * + * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a + * FREQ attribute (for the initial frequency if no peer can be found) + * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those + * should be fixed rather than automatically determined. Can only be + * executed on a network interface that is UP, and fixed BSSID/FREQ + * may be rejected. Another optional parameter is the beacon interval, + * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not + * given defaults to 100 TU (102.4ms). + * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is + * determined by the network interface. + * + * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute + * to identify the device, and the TESTDATA blob attribute to pass through + * to the driver. + * + * @NL80211_CMD_CONNECT: connection request and notification; this command + * requests to connect to a specified network but without separating + * auth and assoc steps. For this, you need to specify the SSID in a + * %NL80211_ATTR_SSID attribute, and can optionally specify the association + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, + * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, + * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and + * %NL80211_ATTR_WIPHY_FREQ_HINT. + * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are + * restrictions on BSS selection, i.e., they effectively prevent roaming + * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT + * can be included to provide a recommendation of the initial BSS while + * allowing the driver to roam to other BSSes within the ESS and also to + * ignore this recommendation if the indicated BSS is not ideal. Only one + * set of BSSID,frequency parameters is used (i.e., either the enforcing + * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict + * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). + * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within + * the ESS in case the device is already associated and an association with + * a different BSS is desired. + * Background scan period can optionally be + * specified in %NL80211_ATTR_BG_SCAN_PERIOD, + * if not specified default background scan configuration + * in driver is used and if period value is 0, bg scan will be disabled. + * This attribute is ignored if driver does not support roam scan. + * It is also sent as an event, with the BSSID and response IEs when the + * connection is established or failed to be established. This can be + * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success, + * non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the + * event, the connection attempt failed due to not being able to initiate + * authentication/association or not receiving a response from the AP. + * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as + * well to remain backwards compatible. + * When establishing a security association, drivers that support 4 way + * handshake offload should send %NL80211_CMD_PORT_AUTHORIZED event when + * the 4 way handshake is completed successfully. + * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself. + * When a security association was established with the new AP (e.g. if + * the FT protocol was used for roaming or the driver completed the 4 way + * handshake), this event should be followed by an + * %NL80211_CMD_PORT_AUTHORIZED event. + * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify + * userspace that a connection was dropped by the AP or due to other + * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and + * %NL80211_ATTR_REASON_CODE attributes are used. + * + * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices + * associated with this wiphy must be down and will follow. + * + * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified + * channel for the specified amount of time. This can be used to do + * off-channel operations like transmit a Public Action frame and wait for + * a response while being associated to an AP on another channel. + * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus + * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the + * frequency for the operation. + * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds + * to remain on the channel. This command is also used as an event to + * notify when the requested duration starts (it may take a while for the + * driver to schedule this time due to other concurrent needs for the + * radio). + * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) + * that will be included with any events pertaining to this request; + * the cookie is also used to cancel the request. + * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a + * pending remain-on-channel duration if the desired operation has been + * completed prior to expiration of the originally requested duration. + * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the + * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to + * uniquely identify the request. + * This command is also used as an event to notify when a requested + * remain-on-channel duration has expired. + * + * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX + * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface + * and @NL80211_ATTR_TX_RATES the set of allowed rates. + * + * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames + * (via @NL80211_CMD_FRAME) for processing in userspace. This command + * requires an interface index, a frame type attribute (optional for + * backward compatibility reasons, if not given assumes action frames) + * and a match attribute containing the first few bytes of the frame + * that should match, e.g. a single byte for only a category match or + * four bytes for vendor frames including the OUI. The registration + * cannot be dropped, but is removed automatically when the netlink + * socket is closed. Multiple registrations can be made. + * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for + * backward compatibility + * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This + * command is used both as a request to transmit a management frame and + * as an event indicating reception of a frame that was not processed in + * kernel code, but is for us (i.e., which may need to be processed in a + * user space application). %NL80211_ATTR_FRAME is used to specify the + * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used + * to indicate on which channel the frame is to be transmitted or was + * received. If this channel is not the current channel (remain-on-channel + * or the operational channel) the device will switch to the given channel + * and transmit the frame, optionally waiting for a response for the time + * specified using %NL80211_ATTR_DURATION. When called, this operation + * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the + * TX status event pertaining to the TX request. + * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the + * management frames at CCK rate or not in 2GHz band. + * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA + * counters which will be updated to the current value. This attribute + * is used during CSA period. + * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this + * command may be used with the corresponding cookie to cancel the wait + * time if it is known that it is no longer necessary. This command is + * also sent as an event whenever the driver has completed the off-channel + * wait time. + * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. + * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame + * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies + * the TX command and %NL80211_ATTR_FRAME includes the contents of the + * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged + * the frame. + * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for + * backward compatibility. + * + * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE + * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE + * + * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command + * is used to configure connection quality monitoring notification trigger + * levels. + * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This + * command is used as an event to indicate the that a trigger level was + * reached. + * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ + * and the attributes determining channel width) the given interface + * (identifed by %NL80211_ATTR_IFINDEX) shall operate on. + * In case multiple channels are supported by the device, the mechanism + * with which it switches channels is implementation-defined. + * When a monitor interface is given, it can only switch channel while + * no other interfaces are operating to avoid disturbing the operation + * of any other interfaces, and other interfaces will again take + * precedence when they are used. + * + * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. + * + * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform + * multicast to unicast conversion. When enabled, all multicast packets + * with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header) + * will be sent out to each station once with the destination (multicast) + * MAC address replaced by the station's MAC address. Note that this may + * break certain expectations of the receiver, e.g. the ability to drop + * unicast IP packets encapsulated in multicast L2 frames, or the ability + * to not send destination unreachable messages in such cases. + * This can only be toggled per BSS. Configure this on an interface of + * type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces + * (%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode. + * If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this + * command, the feature is disabled. + * + * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial + * mesh config parameters may be given. + * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the + * network is determined by the network interface. + * + * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame + * notification. This event is used to indicate that an unprotected + * deauthentication frame was dropped when MFP is in use. + * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame + * notification. This event is used to indicate that an unprotected + * disassociation frame was dropped when MFP is in use. + * + * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a + * beacon or probe response from a compatible mesh peer. This is only + * sent while no station information (sta_info) exists for the new peer + * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH, + * @NL80211_MESH_SETUP_USERSPACE_AMPE, or + * @NL80211_MESH_SETUP_USERSPACE_MPM is set. On reception of this + * notification, userspace may decide to create a new station + * (@NL80211_CMD_NEW_STATION). To stop this notification from + * reoccurring, the userspace authentication daemon may want to create the + * new station with the AUTHENTICATED flag unset and maybe change it later + * depending on the authentication result. + * + * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings. + * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings. + * Since wireless is more complex than wired ethernet, it supports + * various triggers. These triggers can be configured through this + * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For + * more background information, see + * http://wireless.kernel.org/en/users/Documentation/WoWLAN. + * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification + * from the driver reporting the wakeup reason. In this case, the + * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason + * for the wakeup, if it was caused by wireless. If it is not present + * in the wakeup notification, the wireless device didn't cause the + * wakeup but reports that it was woken up. + * + * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver + * the necessary information for supporting GTK rekey offload. This + * feature is typically used during WoWLAN. The configuration data + * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and + * contains the data in sub-attributes). After rekeying happened, + * this command may also be sent by the driver as an MLME event to + * inform userspace of the new replay counter. + * + * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace + * of PMKSA caching dandidates. + * + * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). + * In addition, this can be used as an event to request userspace to take + * actions on TDLS links (set up a new link or tear down an existing one). + * In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested + * operation, %NL80211_ATTR_MAC contains the peer MAC address, and + * %NL80211_ATTR_REASON_CODE the reason code to be used (only with + * %NL80211_TDLS_TEARDOWN). + * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The + * %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be + * sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as + * 802.11 management frames, while TDLS action codes (802.11-2012 + * 8.5.13.1) will be encapsulated and sent as data frames. The currently + * supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES + * and the currently supported TDLS actions codes are given in + * &enum ieee80211_tdls_actioncode. + * + * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP + * (or GO) interface (i.e. hostapd) to ask for unexpected frames to + * implement sending deauth to stations that send unexpected class 3 + * frames. Also used as the event sent by the kernel when such a frame + * is received. + * For the event, the %NL80211_ATTR_MAC attribute carries the TA and + * other attributes like the interface index are present. + * If used as the command it must have an interface index and you can + * only unsubscribe from the event by closing the socket. Subscription + * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events. + * + * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the + * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame + * and wasn't already in a 4-addr VLAN. The event will be sent similarly + * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener. + * + * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface + * by sending a null data frame to it and reporting when the frame is + * acknowleged. This is used to allow timing out inactive clients. Uses + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a + * direct reply with an %NL80211_ATTR_COOKIE that is later used to match + * up the event with the request. The event includes the same data and + * has %NL80211_ATTR_ACK set if the frame was ACKed. + * + * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from + * other BSSes when any interfaces are in AP mode. This helps implement + * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME + * messages. Note that per PHY only one application may register. + * + * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether + * No Acknowledgement Policy should be applied. + * + * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels + * independently of the userspace SME, send this event indicating + * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the + * attributes determining channel width. This indication may also be + * sent when a remotely-initiated switch (e.g., when a STA receives a CSA + * from the remote AP) is completed; + * + * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch + * has been started on an interface, regardless of the initiator + * (ie. whether it was requested from a remote device or + * initiated on our own). It indicates that + * %NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ + * after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's. The userspace may + * decide to react to this indication by requesting other + * interfaces to change channel as well. + * + * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by + * its %NL80211_ATTR_WDEV identifier. It must have been created with + * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the + * P2P Device can be used for P2P operations, e.g. remain-on-channel and + * public action frame TX. + * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by + * its %NL80211_ATTR_WDEV identifier. + * + * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to + * notify userspace that AP has rejected the connection request from a + * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON + * is used for this. + * + * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames + * for IBSS or MESH vif. + * + * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control. + * This is to be used with the drivers advertising the support of MAC + * address based access control. List of MAC addresses is passed in + * %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in + * %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it + * is not already done. The new list will replace any existing list. Driver + * will clear its ACL when the list of MAC addresses passed is empty. This + * command is used in AP/P2P GO mode. Driver has to make sure to clear its + * ACL list during %NL80211_CMD_STOP_AP. + * + * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once + * a radar is detected or the channel availability scan (CAC) has finished + * or was aborted, or a radar was detected, usermode will be notified with + * this event. This command is also used to notify userspace about radars + * while operating on this channel. + * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the + * event. + * + * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features, + * i.e. features for the nl80211 protocol rather than device features. + * Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap. + * + * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition + * Information Element to the WLAN driver + * + * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver + * to the supplicant. This will carry the target AP's MAC address along + * with the relevant Information Elements. This event is used to report + * received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). + * + * @NL80211_CMD_CRIT_PROTOCOL_START: Indicates user-space will start running + * a critical protocol that needs more reliability in the connection to + * complete. + * + * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can + * return back to normal. + * + * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules. + * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. + * + * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the + * the new channel information (Channel Switch Announcement - CSA) + * in the beacon for some time (as defined in the + * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the + * new channel. Userspace provides the new channel information (using + * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel + * width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform + * other station that transmission must be blocked until the channel + * switch is complete. + * + * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified + * by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in + * %NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in + * %NL80211_ATTR_VENDOR_DATA. + * For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is + * used in the wiphy data as a nested attribute containing descriptions + * (&struct nl80211_vendor_cmd_info) of the supported vendor commands. + * This may also be sent as an event with the same attributes. + * + * @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values. + * The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If + * that attribute is not included, QoS mapping is disabled. Since this + * QoS mapping is relevant for IP packets, it is only valid during an + * association. This is cleared on disassociation and AP restart. + * + * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given + * %NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO + * and %NL80211_ATTR_ADMITTED_TIME parameters. + * Note that the action frame handshake with the AP shall be handled by + * userspace via the normal management RX/TX framework, this only sets + * up the TX TS in the driver/device. + * If the admitted time attribute is not added then the request just checks + * if a subsequent setup could be successful, the intent is to use this to + * avoid setting up a session with the AP when local restrictions would + * make that impossible. However, the subsequent "real" setup may still + * fail even if the check was successful. + * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID + * and %NL80211_ATTR_MAC parameters. It isn't necessary to call this + * before removing a station entry entirely, or before disassociating + * or similar, cleanup will happen in the driver/device in this case. + * + * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to + * destination %NL80211_ATTR_MAC on the interface identified by + * %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and + * bandwidth of a channel must be given. + * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the + * network is determined by the network interface. + * + * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer, + * identified by the %NL80211_ATTR_MAC parameter. A target channel is + * provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining + * channel width/type. The target operating class is given via + * %NL80211_ATTR_OPER_CLASS. + * The driver is responsible for continually initiating channel-switching + * operations and returning to the base channel for communication with the + * AP. + * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS + * peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel + * when this command completes. + * + * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used + * as an event to indicate changes for devices with wiphy-specific regdom + * management. + * + * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is + * not running. The driver indicates the status of the scan through + * cfg80211_scan_done(). + * + * @NL80211_CMD_START_NAN: Start NAN operation, identified by its + * %NL80211_ATTR_WDEV interface. This interface must have been + * previously created with %NL80211_CMD_NEW_INTERFACE. After it + * has been started, the NAN interface will create or join a + * cluster. This command must have a valid + * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional + * %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is + * omitted or set to 0, it means don't-care and the device will + * decide what to use. After this command NAN functions can be + * added. + * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by + * its %NL80211_ATTR_WDEV interface. + * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined + * with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this + * operation returns the strictly positive and unique instance id + * (%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE) + * of the function upon success. + * Since instance ID's can be re-used, this cookie is the right + * way to identify the function. This will avoid races when a termination + * event is handled by the user space after it has already added a new + * function that got the same instance id from the kernel as the one + * which just terminated. + * This cookie may be used in NAN events even before the command + * returns, so userspace shouldn't process NAN events until it processes + * the response to this command. + * Look at %NL80211_ATTR_SOCKET_OWNER as well. + * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie. + * This command is also used as a notification sent when a NAN function is + * terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID + * and %NL80211_ATTR_COOKIE attributes. + * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN + * configuration. NAN must be operational (%NL80211_CMD_START_NAN + * was executed). It must contain at least one of the following + * attributes: %NL80211_ATTR_NAN_MASTER_PREF, + * %NL80211_ATTR_BANDS. If %NL80211_ATTR_BANDS is omitted, the + * current configuration is not changed. If it is present but + * set to zero, the configuration is changed to don't-care + * (i.e. the device can decide what to do). + * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported. + * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and + * %NL80211_ATTR_COOKIE. + * + * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters + * for subsequent roaming cases if the driver or firmware uses internal + * BSS selection. This command can be issued only while connected and it + * does not result in a change for the current association. Currently, + * only the %NL80211_ATTR_IE data is used and updated with this command. + * + * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0 + * for the given authenticator address (specified with %NL80211_ATTR_MAC). + * When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the + * PMK-R0, otherwise it specifies the PMK. + * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously + * configured PMK for the authenticator address identified by + * %NL80211_ATTR_MAC. + * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way + * handshake was completed successfully by the driver. The BSSID is + * specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake + * offload should send this event after indicating 802.11 association with + * %NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed + * %NL80211_CMD_DISCONNECT should be indicated instead. + * + * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request + * and RX notification. This command is used both as a request to transmit + * a control port frame and as a notification that a control port frame + * has been received. %NL80211_ATTR_FRAME is used to specify the + * frame contents. The frame is the raw EAPoL data, without ethernet or + * 802.11 headers. + * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added + * indicating the protocol type of the received frame; whether the frame + * was received unencrypted and the MAC address of the peer respectively. + * + * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded. + * + * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host + * drivers that do not define separate commands for authentication and + * association, but rely on user space for the authentication to happen. + * This interface acts both as the event request (driver to user space) + * to trigger the authentication and command response (userspace to + * driver) to indicate the authentication status. + * + * User space uses the %NL80211_CMD_CONNECT command to the host driver to + * trigger a connection. The host driver selects a BSS and further uses + * this interface to offload only the authentication part to the user + * space. Authentication frames are passed between the driver and user + * space through the %NL80211_CMD_FRAME interface. Host driver proceeds + * further with the association after getting successful authentication + * status. User space indicates the authentication status through + * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH + * command interface. + * + * Host driver reports this status on an authentication failure to the + * user space through the connect result as the user space would have + * initiated the connection through the connect request. + * + * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's + * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE, + * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its + * address(specified in %NL80211_ATTR_MAC). + * + * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in + * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute. + * + * @NL80211_CMD_PEER_MEASUREMENT_START: start a (set of) peer measurement(s) + * with the given parameters, which are encapsulated in the nested + * %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address + * randomization may be enabled and configured by specifying the + * %NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes. + * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute. + * A u64 cookie for further %NL80211_ATTR_COOKIE use is is returned in + * the netlink extended ack message. + * + * To cancel a measurement, close the socket that requested it. + * + * Measurement results are reported to the socket that requested the + * measurement using @NL80211_CMD_PEER_MEASUREMENT_RESULT when they + * become available, so applications must ensure a large enough socket + * buffer size. + * + * Depending on driver support it may or may not be possible to start + * multiple concurrent measurements. + * @NL80211_CMD_PEER_MEASUREMENT_RESULT: This command number is used for the + * result notification from the driver to the requesting socket. + * @NL80211_CMD_PEER_MEASUREMENT_COMPLETE: Notification only, indicating that + * the measurement completed, using the measurement cookie + * (%NL80211_ATTR_COOKIE). + * + * @NL80211_CMD_NOTIFY_RADAR: Notify the kernel that a radar signal was + * detected and reported by a neighboring device on the channel + * indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes + * determining the width and type. + * + * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to + * offload OWE processing to user space. This intends to support + * OWE AKM by the host drivers that implement SME but rely + * on the user space for the cryptographic/DH IE processing in AP mode. + * + * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric + * refreshing, is that from one mesh point we be able to send some data + * frames to other mesh points which are not currently selected as a + * primary traffic path, but which are only 1 hop away. The absence of + * the primary path to the chosen node makes it necessary to apply some + * form of marking on a chosen packet stream so that the packets can be + * properly steered to the selected node for testing, and not by the + * regular mesh path lookup. Further, the packets must be of type data + * so that the rate control (often embedded in firmware) is used for + * rate selection. + * + * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh + * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame + * content. The frame is ethernet data. + * + * @NL80211_CMD_MAX: highest used command number + * @__NL80211_CMD_AFTER_LAST: internal use + */ +enum nl80211_commands { +/* don't change the order or add anything between, this is ABI! */ + NL80211_CMD_UNSPEC, + + NL80211_CMD_GET_WIPHY, /* can dump */ + NL80211_CMD_SET_WIPHY, + NL80211_CMD_NEW_WIPHY, + NL80211_CMD_DEL_WIPHY, + + NL80211_CMD_GET_INTERFACE, /* can dump */ + NL80211_CMD_SET_INTERFACE, + NL80211_CMD_NEW_INTERFACE, + NL80211_CMD_DEL_INTERFACE, + + NL80211_CMD_GET_KEY, + NL80211_CMD_SET_KEY, + NL80211_CMD_NEW_KEY, + NL80211_CMD_DEL_KEY, + + NL80211_CMD_GET_BEACON, + NL80211_CMD_SET_BEACON, + NL80211_CMD_START_AP, + NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP, + NL80211_CMD_STOP_AP, + NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP, + + NL80211_CMD_GET_STATION, + NL80211_CMD_SET_STATION, + NL80211_CMD_NEW_STATION, + NL80211_CMD_DEL_STATION, + + NL80211_CMD_GET_MPATH, + NL80211_CMD_SET_MPATH, + NL80211_CMD_NEW_MPATH, + NL80211_CMD_DEL_MPATH, + + NL80211_CMD_SET_BSS, + + NL80211_CMD_SET_REG, + NL80211_CMD_REQ_SET_REG, + + NL80211_CMD_GET_MESH_CONFIG, + NL80211_CMD_SET_MESH_CONFIG, + + NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, + + NL80211_CMD_GET_REG, + + NL80211_CMD_GET_SCAN, + NL80211_CMD_TRIGGER_SCAN, + NL80211_CMD_NEW_SCAN_RESULTS, + NL80211_CMD_SCAN_ABORTED, + + NL80211_CMD_REG_CHANGE, + + NL80211_CMD_AUTHENTICATE, + NL80211_CMD_ASSOCIATE, + NL80211_CMD_DEAUTHENTICATE, + NL80211_CMD_DISASSOCIATE, + + NL80211_CMD_MICHAEL_MIC_FAILURE, + + NL80211_CMD_REG_BEACON_HINT, + + NL80211_CMD_JOIN_IBSS, + NL80211_CMD_LEAVE_IBSS, + + NL80211_CMD_TESTMODE, + + NL80211_CMD_CONNECT, + NL80211_CMD_ROAM, + NL80211_CMD_DISCONNECT, + + NL80211_CMD_SET_WIPHY_NETNS, + + NL80211_CMD_GET_SURVEY, + NL80211_CMD_NEW_SURVEY_RESULTS, + + NL80211_CMD_SET_PMKSA, + NL80211_CMD_DEL_PMKSA, + NL80211_CMD_FLUSH_PMKSA, + + NL80211_CMD_REMAIN_ON_CHANNEL, + NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, + + NL80211_CMD_SET_TX_BITRATE_MASK, + + NL80211_CMD_REGISTER_FRAME, + NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME, + NL80211_CMD_FRAME, + NL80211_CMD_ACTION = NL80211_CMD_FRAME, + NL80211_CMD_FRAME_TX_STATUS, + NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS, + + NL80211_CMD_SET_POWER_SAVE, + NL80211_CMD_GET_POWER_SAVE, + + NL80211_CMD_SET_CQM, + NL80211_CMD_NOTIFY_CQM, + + NL80211_CMD_SET_CHANNEL, + NL80211_CMD_SET_WDS_PEER, + + NL80211_CMD_FRAME_WAIT_CANCEL, + + NL80211_CMD_JOIN_MESH, + NL80211_CMD_LEAVE_MESH, + + NL80211_CMD_UNPROT_DEAUTHENTICATE, + NL80211_CMD_UNPROT_DISASSOCIATE, + + NL80211_CMD_NEW_PEER_CANDIDATE, + + NL80211_CMD_GET_WOWLAN, + NL80211_CMD_SET_WOWLAN, + + NL80211_CMD_START_SCHED_SCAN, + NL80211_CMD_STOP_SCHED_SCAN, + NL80211_CMD_SCHED_SCAN_RESULTS, + NL80211_CMD_SCHED_SCAN_STOPPED, + + NL80211_CMD_SET_REKEY_OFFLOAD, + + NL80211_CMD_PMKSA_CANDIDATE, + + NL80211_CMD_TDLS_OPER, + NL80211_CMD_TDLS_MGMT, + + NL80211_CMD_UNEXPECTED_FRAME, + + NL80211_CMD_PROBE_CLIENT, + + NL80211_CMD_REGISTER_BEACONS, + + NL80211_CMD_UNEXPECTED_4ADDR_FRAME, + + NL80211_CMD_SET_NOACK_MAP, + + NL80211_CMD_CH_SWITCH_NOTIFY, + + NL80211_CMD_START_P2P_DEVICE, + NL80211_CMD_STOP_P2P_DEVICE, + + NL80211_CMD_CONN_FAILED, + + NL80211_CMD_SET_MCAST_RATE, + + NL80211_CMD_SET_MAC_ACL, + + NL80211_CMD_RADAR_DETECT, + + NL80211_CMD_GET_PROTOCOL_FEATURES, + + NL80211_CMD_UPDATE_FT_IES, + NL80211_CMD_FT_EVENT, + + NL80211_CMD_CRIT_PROTOCOL_START, + NL80211_CMD_CRIT_PROTOCOL_STOP, + + NL80211_CMD_GET_COALESCE, + NL80211_CMD_SET_COALESCE, + + NL80211_CMD_CHANNEL_SWITCH, + + NL80211_CMD_VENDOR, + + NL80211_CMD_SET_QOS_MAP, + + NL80211_CMD_ADD_TX_TS, + NL80211_CMD_DEL_TX_TS, + + NL80211_CMD_GET_MPP, + + NL80211_CMD_JOIN_OCB, + NL80211_CMD_LEAVE_OCB, + + NL80211_CMD_CH_SWITCH_STARTED_NOTIFY, + + NL80211_CMD_TDLS_CHANNEL_SWITCH, + NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH, + + NL80211_CMD_WIPHY_REG_CHANGE, + + NL80211_CMD_ABORT_SCAN, + + NL80211_CMD_START_NAN, + NL80211_CMD_STOP_NAN, + NL80211_CMD_ADD_NAN_FUNCTION, + NL80211_CMD_DEL_NAN_FUNCTION, + NL80211_CMD_CHANGE_NAN_CONFIG, + NL80211_CMD_NAN_MATCH, + + NL80211_CMD_SET_MULTICAST_TO_UNICAST, + + NL80211_CMD_UPDATE_CONNECT_PARAMS, + + NL80211_CMD_SET_PMK, + NL80211_CMD_DEL_PMK, + + NL80211_CMD_PORT_AUTHORIZED, + + NL80211_CMD_RELOAD_REGDB, + + NL80211_CMD_EXTERNAL_AUTH, + + NL80211_CMD_STA_OPMODE_CHANGED, + + NL80211_CMD_CONTROL_PORT_FRAME, + + NL80211_CMD_GET_FTM_RESPONDER_STATS, + + NL80211_CMD_PEER_MEASUREMENT_START, + NL80211_CMD_PEER_MEASUREMENT_RESULT, + NL80211_CMD_PEER_MEASUREMENT_COMPLETE, + + NL80211_CMD_NOTIFY_RADAR, + + NL80211_CMD_UPDATE_OWE_INFO, + + NL80211_CMD_PROBE_MESH_LINK, + + /* add new commands above here */ + + /* used to define NL80211_CMD_MAX below */ + __NL80211_CMD_AFTER_LAST, + NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 +}; + +/* + * Allow user space programs to use #ifdef on new commands by defining them + * here + */ +#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS +#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE +#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE +#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE +#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE +#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE +#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE +#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT + +#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS + +/* source-level API compatibility */ +#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG +#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG +#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE + +/** + * enum nl80211_attrs - nl80211 netlink attributes + * + * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors + * + * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. + * /sys/class/ieee80211/<phyname>/index + * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) + * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters + * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz, + * defines the channel together with the (deprecated) + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes + * %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1 + * and %NL80211_ATTR_CENTER_FREQ2 + * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values + * of &enum nl80211_chan_width, describing the channel width. See the + * documentation of the enum for more information. + * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the + * channel, used for anything but 20 MHz bandwidth + * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the + * channel, used only for 80+80 MHz bandwidth + * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ + * if HT20 or HT40 are to be used (i.e., HT disabled if not included): + * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including + * this attribute) + * NL80211_CHAN_HT20 = HT20 only + * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel + * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel + * This attribute is now deprecated. + * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is + * less than or equal to the RTS threshold; allowed range: 1..255; + * dot11ShortRetryLimit; u8 + * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is + * greater than the RTS threshold; allowed range: 1..255; + * dot11ShortLongLimit; u8 + * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum + * length in octets for frames; allowed range: 256..8000, disable + * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 + * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length + * larger than or equal to this use RTS/CTS handshake); allowed range: + * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 + * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11 + * section 7.3.2.9; dot11CoverageClass; u8 + * + * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on + * @NL80211_ATTR_IFNAME: network interface name + * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype + * + * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices + * that don't have a netdev (u64) + * + * @NL80211_ATTR_MAC: MAC address (various uses) + * + * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of + * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC + * keys + * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) + * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 + * section 7.3.2.25.1, e.g. 0x000FAC04) + * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and + * CCMP keys, each six bytes in little endian + * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key + * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the + * default management key + * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or + * other commands, indicates which pairwise cipher suites are used + * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or + * other commands, indicates which group cipher suite is used + * + * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU + * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing + * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE + * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE + * + * @NL80211_ATTR_STA_AID: Association ID for the station (u16) + * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of + * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) + * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by + * IEEE 802.11 7.3.1.6 (u16). + * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported + * rates as defined by IEEE 802.11 7.3.2.2 but without the length + * restriction (at most %NL80211_MAX_SUPP_RATES). + * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station + * to, or the AP interface the station was originally added to to. + * @NL80211_ATTR_STA_INFO: information about a station, part of station info + * given for %NL80211_CMD_GET_STATION, nested attribute containing + * info as possible, see &enum nl80211_sta_info. + * + * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, + * consisting of a nested array. + * + * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). + * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link + * (see &enum nl80211_plink_action). + * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. + * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path + * info given for %NL80211_CMD_GET_MPATH, nested attribute described at + * &enum nl80211_mpath_info. + * + * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of + * &enum nl80211_mntr_flags. + * + * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the + * current regulatory domain should be set to or is already set to. + * For example, 'CR', for Costa Rica. This attribute is used by the kernel + * to query the CRDA to retrieve one regulatory domain. This attribute can + * also be used by userspace to query the kernel for the currently set + * regulatory domain. We chose an alpha2 as that is also used by the + * IEEE-802.11 country information element to identify a country. + * Users can also simply ask the wireless core to set regulatory domain + * to a specific alpha2. + * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory + * rules. + * + * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled + * (u8, 0 or 1) + * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled + * (u8, 0 or 1) + * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic + * rates in format defined by IEEE 802.11 7.3.2.2 but without the length + * restriction (at most %NL80211_MAX_SUPP_RATES). + * + * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * + * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all + * supported interface types, each a flag attribute with the number + * of the interface mode. + * + * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for + * %NL80211_CMD_SET_MGMT_EXTRA_IE. + * + * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with + * %NL80211_CMD_SET_MGMT_EXTRA_IE). + * + * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with + * a single scan request, a wiphy attribute. + * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can + * scan with a single scheduled scan request, a wiphy attribute. + * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements + * that can be added to a scan request + * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information + * elements that can be added to a scheduled scan request + * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be + * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. + * + * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) + * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive + * scanning and include a zero-length SSID (wildcard) for wildcard scan + * @NL80211_ATTR_BSS: scan result BSS + * + * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain + * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* + * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently + * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) + * + * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies + * an array of command numbers (i.e. a mapping index to command number) + * that the driver for the given wiphy supports. + * + * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header + * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and + * NL80211_CMD_ASSOCIATE events + * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) + * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, + * represented as a u32 + * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and + * %NL80211_CMD_DISASSOCIATE, u16 + * + * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as + * a u32 + * + * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _before_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* + * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _after_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* + * + * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported + * cipher suites + * + * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look + * for other networks on different channels + * + * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this + * is used, e.g., with %NL80211_CMD_AUTHENTICATE event + * + * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is + * used for the association (&enum nl80211_mfp, represented as a u32); + * this attribute can be used with %NL80211_CMD_ASSOCIATE and + * %NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for + * %NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it + * must have decided whether to use management frame protection or not. + * Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will + * let the driver (or the firmware) decide whether to use MFP or not. + * + * @NL80211_ATTR_STA_FLAGS2: Attribute containing a + * &struct nl80211_sta_flag_update. + * + * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls + * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in + * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE + * request, the driver will assume that the port is unauthorized until + * authorized by user space. Otherwise, port is marked authorized by + * default in station mode. + * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the + * ethertype that will be used for key negotiation. It can be + * specified with the associate and connect commands. If it is not + * specified, the value defaults to 0x888E (PAE, 802.1X). This + * attribute is also used as a flag in the wiphy information to + * indicate that protocols other than PAE are supported. + * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom + * ethertype frames used for key negotiation must not be encrypted. + * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control + * port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE) + * will be sent directly to the network interface or sent via the NL80211 + * socket. If this attribute is missing, then legacy behavior of sending + * control port frames directly to the network interface is used. If the + * flag is included, then control port frames are sent over NL80211 instead + * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is + * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER + * flag. + * + * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. + * We recommend using nested, driver-specific attributes within this. + * + * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT + * event was due to the AP disconnecting the station, and not due to + * a local disconnect request. + * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT + * event (u16) + * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating + * that protected APs should be used. This is also used with NEW_BEACON to + * indicate that the BSS is to use protection. + * + * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON + * to indicate which unicast key ciphers will be used with the connection + * (an array of u32). + * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which group key cipher will be used with the connection (a + * u32). + * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which WPA version(s) the AP we want to associate with is using + * (a u32 with flags from &enum nl80211_wpa_versions). + * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which key management algorithm(s) to use (an array of u32). + * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY, + * indicating the supported AKM suites, intended for specific drivers which + * implement SME and have constraints on which AKMs are supported and also + * the cases where an AKM support is offloaded to the driver/firmware. + * If there is no such notification from the driver, user space should + * assume the driver supports all the AKM suites. + * + * @NL80211_ATTR_REQ_IE: (Re)association request information elements as + * sent out by the card, for ROAM and successful CONNECT events. + * @NL80211_ATTR_RESP_IE: (Re)association response information elements as + * sent by peer, for ROAM and successful CONNECT events. + * + * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT + * commands to specify a request to reassociate within an ESS, i.e., to use + * Reassociate Request frame (with the value of this attribute in the + * Current AP address field) instead of Association Request frame which is + * used for the initial association to an ESS. + * + * @NL80211_ATTR_KEY: key information in a nested attribute with + * %NL80211_KEY_* sub-attributes + * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() + * and join_ibss(), key information is in a nested attribute each + * with %NL80211_KEY_* sub-attributes + * + * @NL80211_ATTR_PID: Process ID of a network namespace. + * + * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for + * dumps. This number increases whenever the object list being + * dumped changes, and as such userspace can verify that it has + * obtained a complete and consistent snapshot by verifying that + * all dump messages contain the same generation number. If it + * changed then the list changed and the dump should be repeated + * completely from scratch. + * + * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface + * + * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of + * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute + * containing info as possible, see &enum survey_info. + * + * @NL80211_ATTR_PMKID: PMK material for PMKSA caching. + * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can + * cache, a wiphy attribute. + * + * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. + * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that + * specifies the maximum duration that can be requested with the + * remain-on-channel operation, in milliseconds, u32. + * + * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. + * + * @NL80211_ATTR_TX_RATES: Nested set of attributes + * (enum nl80211_tx_rate_attributes) describing TX rates per band. The + * enum nl80211_band value is used as the index (nla_type() of the nested + * data. If a band is not included, it will be configured to allow all + * rates based on negotiated supported rates information. This attribute + * is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP, + * and joining mesh networks (not IBSS yet). In the later case, it must + * specify just a single bitrate, which is to be used for the beacon. + * The driver must also specify support for this with the extended + * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, + * NL80211_EXT_FEATURE_BEACON_RATE_HT and + * NL80211_EXT_FEATURE_BEACON_RATE_VHT. + * + * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain + * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. + * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the + * @NL80211_CMD_REGISTER_FRAME command. + * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a + * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing + * information about which frame types can be transmitted with + * %NL80211_CMD_FRAME. + * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a + * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing + * information about which frame types can be registered for RX. + * + * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was + * acknowledged by the recipient. + * + * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. + * + * @NL80211_ATTR_CQM: connection quality monitor configuration in a + * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. + * + * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command + * is requesting a local authentication/association state change without + * invoking actual management frame exchange. This can be used with + * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, + * NL80211_CMD_DISASSOCIATE. + * + * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations + * connected to this BSS. + * + * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See + * &enum nl80211_tx_power_setting for possible values. + * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units. + * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING + * for non-automatic settings. + * + * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly + * means support for per-station GTKs. + * + * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting. + * This can be used to mask out antennas which are not attached or should + * not be used for transmitting. If an antenna is not selected in this + * bitmap the hardware is not allowed to transmit on this antenna. + * + * Each bit represents one antenna, starting with antenna 1 at the first + * bit. Depending on which antennas are selected in the bitmap, 802.11n + * drivers can derive which chainmasks to use (if all antennas belonging to + * a particular chain are disabled this chain should be disabled) and if + * a chain has diversity antennas wether diversity should be used or not. + * HT capabilities (STBC, TX Beamforming, Antenna selection) can be + * derived from the available chains after applying the antenna mask. + * Non-802.11n drivers can derive wether to use diversity or not. + * Drivers may reject configurations or RX/TX mask combinations they cannot + * support by returning -EINVAL. + * + * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving. + * This can be used to mask out antennas which are not attached or should + * not be used for receiving. If an antenna is not selected in this bitmap + * the hardware should not be configured to receive on this antenna. + * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX. + * + * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available + * for configuration as TX antennas via the above parameters. + * + * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available + * for configuration as RX antennas via the above parameters. + * + * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS + * + * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be + * transmitted on another channel when the channel given doesn't match + * the current channel. If the current channel doesn't match and this + * flag isn't set, the frame will be rejected. This is also used as an + * nl80211 capability flag. + * + * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16) + * + * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags + * attributes, specifying what a key should be set as default as. + * See &enum nl80211_key_default_types. + * + * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be + * changed once the mesh is active. + * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute + * containing attributes from &enum nl80211_meshconf_params. + * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver + * allows auth frames in a mesh to be passed to userspace for processing via + * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. + * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in + * &enum nl80211_plink_state. Used when userspace is driving the peer link + * management state machine. @NL80211_MESH_SETUP_USERSPACE_AMPE or + * @NL80211_MESH_SETUP_USERSPACE_MPM must be enabled. + * + * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy + * capabilities, the supported WoWLAN triggers + * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to + * indicate which WoW triggers should be enabled. This is also + * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN + * triggers. + * + * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan + * cycles, in msecs. + * + * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more + * sets of attributes to match during scheduled scans. Only BSSs + * that match any of the sets will be reported. These are + * pass-thru filter rules. + * For a match to succeed, the BSS must match all attributes of a + * set. Since not every hardware supports matching all types of + * attributes, there is no guarantee that the reported BSSs are + * fully complying with the match sets and userspace needs to be + * able to ignore them by itself. + * Thus, the implementation is somewhat hardware-dependent, but + * this is only an optimization and the userspace application + * needs to handle all the non-filtered results anyway. + * If the match attributes don't make sense when combined with + * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID + * is included in the probe request, but the match attributes + * will never let it go through), -EINVAL may be returned. + * If omitted, no filtering is done. + * + * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported + * interface combinations. In each nested item, it contains attributes + * defined in &enum nl80211_if_combination_attrs. + * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like + * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that + * are managed in software: interfaces of these types aren't subject to + * any restrictions in their number or combinations. + * + * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information + * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. + * + * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, + * nested array attribute containing an entry for each band, with the entry + * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but + * without the length restriction (at most %NL80211_MAX_SUPP_RATES). + * + * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon + * and Probe Response (when response to wildcard Probe Request); see + * &enum nl80211_hidden_ssid, represented as a u32 + * + * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. + * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to + * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the + * driver (or firmware) replies to Probe Request frames. + * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association + * Response frames. This is used with %NL80211_CMD_NEW_BEACON and + * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into + * (Re)Association Response frames when the driver (or firmware) replies to + * (Re)Association Request frames. + * + * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration + * of the station, see &enum nl80211_sta_wme_attr. + * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working + * as AP. + * + * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of + * roaming to another AP in the same ESS if the signal lever is low. + * + * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching + * candidate information, see &enum nl80211_pmksa_candidate_attr. + * + * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not + * for management frames transmission. In order to avoid p2p probe/action + * frames are being transmitted at CCK rate in 2GHz band, the user space + * applications use this attribute. + * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and + * %NL80211_CMD_FRAME commands. + * + * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup + * request, link setup confirm, link teardown, etc.). Values are + * described in the TDLS (802.11z) specification. + * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a + * TDLS conversation between two devices. + * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see + * &enum nl80211_tdls_operation, represented as a u8. + * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate + * as a TDLS peer sta. + * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown + * procedures should be performed by sending TDLS packets via + * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be + * used for asking the driver to perform a TDLS operation. + * + * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices + * that have AP support to indicate that they have the AP SME integrated + * with support for the features listed in this attribute, see + * &enum nl80211_ap_sme_features. + * + * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells + * the driver to not wait for an acknowledgement. Note that due to this, + * it will also not give a status callback nor return a cookie. This is + * mostly useful for probe responses to save airtime. + * + * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from + * &enum nl80211_feature_flags and is advertised in wiphy information. + * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe + * requests while operating in AP-mode. + * This attribute holds a bitmap of the supported protocols for + * offloading (see &enum nl80211_probe_resp_offload_support_attr). + * + * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire + * probe-response frame. The DA field in the 802.11 header is zero-ed out, + * to be filled by the FW. + * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable + * this feature. Currently, only supported in mac80211 drivers. + * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the + * ATTR_HT_CAPABILITY to which attention should be paid. + * Currently, only mac80211 NICs support this feature. + * The values that may be configured are: + * MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40 + * AMPDU density and AMPDU factor. + * All values are treated as suggestions and may be ignored + * by the driver as required. The actual values may be seen in + * the station debugfs ht_caps file. + * + * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country + * abides to when initiating radiation on DFS channels. A country maps + * to one DFS region. + * + * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of + * up to 16 TIDs. + * + * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be + * used by the drivers which has MLME in firmware and does not have support + * to report per station tx/rx activity to free up the station entry from + * the list. This needs to be used when the driver advertises the + * capability to timeout the stations. + * + * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int); + * this attribute is (depending on the driver capabilities) added to + * received frames indicated with %NL80211_CMD_FRAME. + * + * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds + * or 0 to disable background scan. + * + * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from + * userspace. If unset it is assumed the hint comes directly from + * a user. If set code could specify exactly what type of source + * was used to provide the hint. For the different types of + * allowed user regulatory hints see nl80211_user_reg_hint_type. + * + * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected + * the connection request from a station. nl80211_connect_failed_reason + * enum has different reasons of connection failure. + * + * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames. + * This contains the authentication frame body (non-IE and IE data), + * excluding the Authentication algorithm number, i.e., starting at the + * Authentication transaction sequence number field. It is used with + * authentication algorithms that need special fields to be added into + * the frames (SAE and FILS). Currently, only the SAE cases use the + * initial two fields (Authentication transaction sequence number and + * Status code). However, those fields are included in the attribute data + * for all authentication algorithms to keep the attribute definition + * consistent. + * + * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * + * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32) + * + * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with + * the START_AP and SET_BSS commands + * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the + * START_AP and SET_BSS commands. This can have the values 0 or 1; + * if not given in START_AP 0 is assumed, if not given in SET_BSS + * no change is made. + * + * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode + * defined in &enum nl80211_mesh_power_mode. + * + * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy, + * carried in a u32 attribute + * + * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for + * MAC ACL. + * + * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum + * number of MAC addresses that a device can support for MAC + * ACL. + * + * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, + * contains a value of enum nl80211_radar_event (u32). + * + * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver + * has and handles. The format is the same as the IE contents. See + * 802.11-2012 8.4.2.29 for more information. + * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver + * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. + * + * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to + * the driver, e.g., to enable TDLS power save (PU-APSD). + * + * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are + * advertised to the driver, e.g., to enable TDLS off channel operations + * and PU-APSD. + * + * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see + * &enum nl80211_protocol_features, the attribute is a u32. + * + * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports + * receiving the data for a single wiphy split across multiple + * messages, given with wiphy dump message + * + * @NL80211_ATTR_MDID: Mobility Domain Identifier + * + * @NL80211_ATTR_IE_RIC: Resource Information Container Information + * Element + * + * @NL80211_ATTR_CRIT_PROT_ID: critical protocol identifier requiring increased + * reliability, see &enum nl80211_crit_proto_id (u16). + * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which + * the connection should have increased reliability (u16). + * + * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16). + * This is similar to @NL80211_ATTR_STA_AID but with a difference of being + * allowed to be used with the first @NL80211_CMD_SET_STATION command to + * update a TDLS peer STA entry. + * + * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. + * + * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's + * until the channel switch event. + * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission + * must be blocked on the current channel (before the channel switch + * operation). + * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information + * for the time while performing a channel switch. + * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel + * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). + * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel + * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP). + * + * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. + * As specified in the &enum nl80211_rxmgmt_flags. + * + * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels. + * + * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported + * supported operating classes. + * + * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space + * controls DFS operation in IBSS mode. If the flag is included in + * %NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS + * channels and reports radar events to userspace. Userspace is required + * to react to radar events, e.g. initiate a channel switch or leave the + * IBSS network. + * + * @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports + * 5 MHz channel bandwidth. + * @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports + * 10 MHz channel bandwidth. + * + * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode + * Notification Element based on association request when used with + * %NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when + * %NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS); + * u8 attribute. + * + * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if + * %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet) + * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command + * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this + * attribute is also used for vendor command feature advertisement + * @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy + * info, containing a nested array of possible events + * + * @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This + * data is in the format defined for the payload of the QoS Map Set element + * in IEEE Std 802.11-2012, 8.4.2.97. + * + * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS + * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS + * + * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many + * associated stations are supported in AP mode (including P2P GO); u32. + * Since drivers may not have a fixed limit on the maximum number (e.g., + * other concurrent operations may affect this), drivers are allowed to + * advertise values that cannot always be met. In such cases, an attempt + * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. + * + * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which + * should be updated when the frame is transmitted. + * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum + * supported number of csa counters. + * + * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. + * As specified in the &enum nl80211_tdls_peer_capability. + * + * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface + * creation then the new interface will be owned by the netlink socket + * that created it and will be destroyed when the socket is closed. + * If set during scheduled scan start then the new scan req will be + * owned by the netlink socket that created it and the scheduled scan will + * be stopped when the socket is closed. + * If set during configuration of regulatory indoor operation then the + * regulatory indoor configuration would be owned by the netlink socket + * that configured the indoor setting, and the indoor operation would be + * cleared when the socket is closed. + * If set during NAN interface creation, the interface will be destroyed + * if the socket is closed just like any other interface. Moreover, NAN + * notifications will be sent in unicast to that socket. Without this + * attribute, the notifications will be sent to the %NL80211_MCGRP_NAN + * multicast group. + * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the + * station will deauthenticate when the socket is closed. + * If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically + * torn down when the socket is closed. + * If set during %NL80211_CMD_JOIN_MESH the mesh setup will be + * automatically torn down when the socket is closed. + * If set during %NL80211_CMD_START_AP the AP will be automatically + * disabled when the socket is closed. + * + * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is + * the TDLS link initiator. + * + * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection + * shall support Radio Resource Measurements (11k). This attribute can be + * used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests. + * User space applications are expected to use this flag only if the + * underlying device supports these minimal RRM features: + * %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES, + * %NL80211_FEATURE_QUIET, + * Or, if global RRM is supported, see: + * %NL80211_EXT_FEATURE_RRM + * If this flag is used, driver must add the Power Capabilities IE to the + * association request. In addition, it must also set the RRM capability + * flag in the association request's Capability Info field. + * + * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout + * estimation algorithm (dynack). In order to activate dynack + * %NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower + * drivers to indicate dynack capability. Dynack is automatically disabled + * setting valid value for coverage class. + * + * @NL80211_ATTR_TSID: a TSID value (u8 attribute) + * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute) + * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds + * (per second) (u16 attribute) + * + * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see + * &enum nl80211_smps_mode. + * + * @NL80211_ATTR_OPER_CLASS: operating class + * + * @NL80211_ATTR_MAC_MASK: MAC address mask + * + * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device + * is self-managing its regulatory information and any regulatory domain + * obtained from it is coming from the device's wiphy and not the global + * cfg80211 regdomain. + * + * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte + * array. The feature flags are identified by their bit index (see &enum + * nl80211_ext_feature_index). The bit index is ordered starting at the + * least-significant bit of the first byte in the array, ie. bit index 0 + * is located at bit 0 of byte 0. bit index 25 would be located at bit 1 + * of byte 3 (u8 array). + * + * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be + * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY + * may return a survey entry without a channel indicating global radio + * statistics (only some values are valid and make sense.) + * For devices that don't return such an entry even then, the information + * should be contained in the result as the sum of the respective counters + * over all channels. + * + * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a + * scheduled scan is started. Or the delay before a WoWLAN + * net-detect scan is started, counting from the moment the + * system is suspended. This value is a u32, in seconds. + + * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device + * is operating in an indoor environment. + * + * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for + * scheduled scan supported by the device (u32), a wiphy attribute. + * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for + * a scan plan (u32), a wiphy attribute. + * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in + * a scan plan (u32), a wiphy attribute. + * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan. + * Each scan plan defines the number of scan iterations and the interval + * between scans. The last scan plan will always run infinitely, + * thus it must not specify the number of iterations, only the interval + * between scans. The scan plans are executed sequentially. + * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. + * @NL80211_ATTR_PBSS: flag attribute. If set it means operate + * in a PBSS. Specified in %NL80211_CMD_CONNECT to request + * connecting to a PCP, and in %NL80211_CMD_START_AP to start + * a PCP instead of AP. Relevant for DMG networks only. + * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the + * BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains + * attributes according &enum nl80211_bss_select_attr to indicate what + * BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT + * it contains the behaviour-specific attribute containing the parameters for + * BSS selection to be done by driver and/or firmware. + * + * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported + * or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status + * + * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment + * + * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes: + * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA, + * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per + * interface type. + * + * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO + * groupID for monitor mode. + * The first 8 bytes are a mask that defines the membership in each + * group (there are 64 groups, group 0 and 63 are reserved), + * each bit represents a group and set to 1 for being a member in + * that group and 0 for not being a member. + * The remaining 16 bytes define the position in each group: 2 bits for + * each group. + * (smaller group numbers represented on most significant bits and bigger + * group numbers on least significant bits.) + * This attribute is used only if all interfaces are in monitor mode. + * Set this attribute in order to monitor packets using the given MU-MIMO + * groupID data. + * to turn off that feature set all the bits of the groupID to zero. + * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow + * when using MU-MIMO air sniffer. + * to turn that feature off set an invalid mac address + * (e.g. FF:FF:FF:FF:FF:FF) + * + * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually + * started (u64). The time is the TSF of the BSS the interface that + * requested the scan is connected to (if available, otherwise this + * attribute must not be included). + * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which + * %NL80211_ATTR_SCAN_START_TIME_TSF is set. + * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If + * %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the + * maximum measurement duration allowed. This attribute is used with + * measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN + * if the scan is used for beacon report radio measurement. + * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates + * that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is + * mandatory. If this flag is not set, the duration is the maximum duration + * and the actual measurement duration may be shorter. + * + * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is + * used to pull the stored data for mesh peer in power save state. + * + * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by + * %NL80211_CMD_START_NAN and optionally with + * %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0. + * Also, values 1 and 255 are reserved for certification purposes and + * should not be used during a normal device operation. + * @NL80211_ATTR_BANDS: operating bands configuration. This is a u32 + * bitmask of BIT(NL80211_BAND_*) as described in %enum + * nl80211_band. For instance, for NL80211_BAND_2GHZ, bit 0 + * would be set. This attribute is used with + * %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and + * it is optional. If no bands are set, it means don't-care and + * the device will decide what to use. + * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See + * &enum nl80211_nan_func_attributes for description of this nested + * attribute. + * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute. + * See &enum nl80211_nan_match_attributes. + * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame + * protection. + * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association + * Request/Response frame protection. This attribute contains the 16 octet + * STA Nonce followed by 16 octets of AP Nonce. + * + * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast + * packets should be send out as unicast to all stations (flag attribute). + * + * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also + * used in various commands/events for specifying the BSSID. + * + * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which + * other BSSs has to be better or slightly worse than the current + * connected BSS so that they get reported to user space. + * This will give an opportunity to userspace to consider connecting to + * other matching BSSs which have better or slightly worse RSSI than + * the current connected BSS by using an offloaded operation to avoid + * unnecessary wakeups. + * + * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in + * the specified band is to be adjusted before doing + * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparison to figure out + * better BSSs. The attribute value is a packed structure + * value as specified by &struct nl80211_bss_select_rssi_adjust. + * + * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out. + * u32 attribute with an &enum nl80211_timeout_reason value. This is used, + * e.g., with %NL80211_CMD_CONNECT event. + * + * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP) + * username part of NAI used to refer keys rRK and rIK. This is used with + * %NL80211_CMD_CONNECT. + * + * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part + * of NAI specifying the domain name of the ER server. This is used with + * %NL80211_CMD_CONNECT. + * + * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number + * to use in ERP messages. This is used in generating the FILS wrapped data + * for FILS authentication and is used with %NL80211_CMD_CONNECT. + * + * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the + * NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and + * %NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK + * from successful FILS authentication and is used with + * %NL80211_CMD_CONNECT. + * + * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP + * identifying the scope of PMKSAs. This is used with + * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA. + * + * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with + * %NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID. + * For %NL80211_CMD_CONNECT it is used to provide PSK for offloading 4-way + * handshake for WPA/WPA2-PSK networks. For 802.1X authentication it is + * used with %NL80211_CMD_SET_PMK. For offloaded FT support this attribute + * specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME is included as well. + * + * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to + * indicate that it supports multiple active scheduled scan requests. + * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled + * scan request that may be active for the device (u32). + * + * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include + * in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it + * wants to use the supported offload of the 4-way handshake. + * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT. + * @NL80211_ATTR_PORT_AUTHORIZED: (reserved) + * + * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external + * authentication operation (u32 attribute with an + * &enum nl80211_external_auth_action value). This is used with the + * %NL80211_CMD_EXTERNAL_AUTH request event. + * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user + * space supports external authentication. This attribute shall be used + * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver + * may offload authentication processing to user space if this capability + * is indicated in the respective requests from the user space. + * + * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this + * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. + * + * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum + * nl80211_txq_stats) + * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy. + * The smaller of this and the memory limit is enforced. + * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory memory limit (in bytes) for the + * TXQ queues for this phy. The smaller of this and the packet limit is + * enforced. + * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes + * a flow is assigned on each round of the DRR scheduler. + * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION). Can be set + * only if %NL80211_STA_FLAG_WME is set. + * + * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include + * in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing + * measurement (FTM) responder functionality and containing parameters as + * possible, see &enum nl80211_ftm_responder_attr + * + * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder + * statistics, see &enum nl80211_ftm_responder_stats. + * + * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32), + * if the attribute is not given no timeout is requested. Note that 0 is an + * invalid value. + * + * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result) + * data, uses nested attributes specified in + * &enum nl80211_peer_measurement_attrs. + * This is also used for capability advertisement in the wiphy information, + * with the appropriate sub-attributes. + * + * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime + * scheduler. + * + * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for + * station associated with the AP. See &enum nl80211_tx_power_setting for + * possible values. + * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This + * allows to set Tx power for a station. If this attribute is not included, + * the default per-interface tx power setting will be overriding. Driver + * should be picking up the lowest tx power, either tx power per-interface + * or per-station. + * + * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It + * is used with %NL80211_CMD_CONNECT to provide password for offloading + * SAE authentication for WPA3-Personal networks. + * + * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support. + * + * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection + * functionality. + * + * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz + * channel(s) that are allowed to be used for EDMG transmissions. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute) + * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes + * the allowed channel bandwidth configurations. (u8 attribute) + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. + * + * @NUM_NL80211_ATTR: total number of nl80211_attrs available + * @NL80211_ATTR_MAX: highest attribute number currently defined + * @__NL80211_ATTR_AFTER_LAST: internal use + */ +enum nl80211_attrs { +/* don't change the order or add anything between, this is ABI! */ + NL80211_ATTR_UNSPEC, + + NL80211_ATTR_WIPHY, + NL80211_ATTR_WIPHY_NAME, + + NL80211_ATTR_IFINDEX, + NL80211_ATTR_IFNAME, + NL80211_ATTR_IFTYPE, + + NL80211_ATTR_MAC, + + NL80211_ATTR_KEY_DATA, + NL80211_ATTR_KEY_IDX, + NL80211_ATTR_KEY_CIPHER, + NL80211_ATTR_KEY_SEQ, + NL80211_ATTR_KEY_DEFAULT, + + NL80211_ATTR_BEACON_INTERVAL, + NL80211_ATTR_DTIM_PERIOD, + NL80211_ATTR_BEACON_HEAD, + NL80211_ATTR_BEACON_TAIL, + + NL80211_ATTR_STA_AID, + NL80211_ATTR_STA_FLAGS, + NL80211_ATTR_STA_LISTEN_INTERVAL, + NL80211_ATTR_STA_SUPPORTED_RATES, + NL80211_ATTR_STA_VLAN, + NL80211_ATTR_STA_INFO, + + NL80211_ATTR_WIPHY_BANDS, + + NL80211_ATTR_MNTR_FLAGS, + + NL80211_ATTR_MESH_ID, + NL80211_ATTR_STA_PLINK_ACTION, + NL80211_ATTR_MPATH_NEXT_HOP, + NL80211_ATTR_MPATH_INFO, + + NL80211_ATTR_BSS_CTS_PROT, + NL80211_ATTR_BSS_SHORT_PREAMBLE, + NL80211_ATTR_BSS_SHORT_SLOT_TIME, + + NL80211_ATTR_HT_CAPABILITY, + + NL80211_ATTR_SUPPORTED_IFTYPES, + + NL80211_ATTR_REG_ALPHA2, + NL80211_ATTR_REG_RULES, + + NL80211_ATTR_MESH_CONFIG, + + NL80211_ATTR_BSS_BASIC_RATES, + + NL80211_ATTR_WIPHY_TXQ_PARAMS, + NL80211_ATTR_WIPHY_FREQ, + NL80211_ATTR_WIPHY_CHANNEL_TYPE, + + NL80211_ATTR_KEY_DEFAULT_MGMT, + + NL80211_ATTR_MGMT_SUBTYPE, + NL80211_ATTR_IE, + + NL80211_ATTR_MAX_NUM_SCAN_SSIDS, + + NL80211_ATTR_SCAN_FREQUENCIES, + NL80211_ATTR_SCAN_SSIDS, + NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ + NL80211_ATTR_BSS, + + NL80211_ATTR_REG_INITIATOR, + NL80211_ATTR_REG_TYPE, + + NL80211_ATTR_SUPPORTED_COMMANDS, + + NL80211_ATTR_FRAME, + NL80211_ATTR_SSID, + NL80211_ATTR_AUTH_TYPE, + NL80211_ATTR_REASON_CODE, + + NL80211_ATTR_KEY_TYPE, + + NL80211_ATTR_MAX_SCAN_IE_LEN, + NL80211_ATTR_CIPHER_SUITES, + + NL80211_ATTR_FREQ_BEFORE, + NL80211_ATTR_FREQ_AFTER, + + NL80211_ATTR_FREQ_FIXED, + + + NL80211_ATTR_WIPHY_RETRY_SHORT, + NL80211_ATTR_WIPHY_RETRY_LONG, + NL80211_ATTR_WIPHY_FRAG_THRESHOLD, + NL80211_ATTR_WIPHY_RTS_THRESHOLD, + + NL80211_ATTR_TIMED_OUT, + + NL80211_ATTR_USE_MFP, + + NL80211_ATTR_STA_FLAGS2, + + NL80211_ATTR_CONTROL_PORT, + + NL80211_ATTR_TESTDATA, + + NL80211_ATTR_PRIVACY, + + NL80211_ATTR_DISCONNECTED_BY_AP, + NL80211_ATTR_STATUS_CODE, + + NL80211_ATTR_CIPHER_SUITES_PAIRWISE, + NL80211_ATTR_CIPHER_SUITE_GROUP, + NL80211_ATTR_WPA_VERSIONS, + NL80211_ATTR_AKM_SUITES, + + NL80211_ATTR_REQ_IE, + NL80211_ATTR_RESP_IE, + + NL80211_ATTR_PREV_BSSID, + + NL80211_ATTR_KEY, + NL80211_ATTR_KEYS, + + NL80211_ATTR_PID, + + NL80211_ATTR_4ADDR, + + NL80211_ATTR_SURVEY_INFO, + + NL80211_ATTR_PMKID, + NL80211_ATTR_MAX_NUM_PMKIDS, + + NL80211_ATTR_DURATION, + + NL80211_ATTR_COOKIE, + + NL80211_ATTR_WIPHY_COVERAGE_CLASS, + + NL80211_ATTR_TX_RATES, + + NL80211_ATTR_FRAME_MATCH, + + NL80211_ATTR_ACK, + + NL80211_ATTR_PS_STATE, + + NL80211_ATTR_CQM, + + NL80211_ATTR_LOCAL_STATE_CHANGE, + + NL80211_ATTR_AP_ISOLATE, + + NL80211_ATTR_WIPHY_TX_POWER_SETTING, + NL80211_ATTR_WIPHY_TX_POWER_LEVEL, + + NL80211_ATTR_TX_FRAME_TYPES, + NL80211_ATTR_RX_FRAME_TYPES, + NL80211_ATTR_FRAME_TYPE, + + NL80211_ATTR_CONTROL_PORT_ETHERTYPE, + NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, + + NL80211_ATTR_SUPPORT_IBSS_RSN, + + NL80211_ATTR_WIPHY_ANTENNA_TX, + NL80211_ATTR_WIPHY_ANTENNA_RX, + + NL80211_ATTR_MCAST_RATE, + + NL80211_ATTR_OFFCHANNEL_TX_OK, + + NL80211_ATTR_BSS_HT_OPMODE, + + NL80211_ATTR_KEY_DEFAULT_TYPES, + + NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, + + NL80211_ATTR_MESH_SETUP, + + NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, + NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, + + NL80211_ATTR_SUPPORT_MESH_AUTH, + NL80211_ATTR_STA_PLINK_STATE, + + NL80211_ATTR_WOWLAN_TRIGGERS, + NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, + + NL80211_ATTR_SCHED_SCAN_INTERVAL, + + NL80211_ATTR_INTERFACE_COMBINATIONS, + NL80211_ATTR_SOFTWARE_IFTYPES, + + NL80211_ATTR_REKEY_DATA, + + NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS, + NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN, + + NL80211_ATTR_SCAN_SUPP_RATES, + + NL80211_ATTR_HIDDEN_SSID, + + NL80211_ATTR_IE_PROBE_RESP, + NL80211_ATTR_IE_ASSOC_RESP, + + NL80211_ATTR_STA_WME, + NL80211_ATTR_SUPPORT_AP_UAPSD, + + NL80211_ATTR_ROAM_SUPPORT, + + NL80211_ATTR_SCHED_SCAN_MATCH, + NL80211_ATTR_MAX_MATCH_SETS, + + NL80211_ATTR_PMKSA_CANDIDATE, + + NL80211_ATTR_TX_NO_CCK_RATE, + + NL80211_ATTR_TDLS_ACTION, + NL80211_ATTR_TDLS_DIALOG_TOKEN, + NL80211_ATTR_TDLS_OPERATION, + NL80211_ATTR_TDLS_SUPPORT, + NL80211_ATTR_TDLS_EXTERNAL_SETUP, + + NL80211_ATTR_DEVICE_AP_SME, + + NL80211_ATTR_DONT_WAIT_FOR_ACK, + + NL80211_ATTR_FEATURE_FLAGS, + + NL80211_ATTR_PROBE_RESP_OFFLOAD, + + NL80211_ATTR_PROBE_RESP, + + NL80211_ATTR_DFS_REGION, + + NL80211_ATTR_DISABLE_HT, + NL80211_ATTR_HT_CAPABILITY_MASK, + + NL80211_ATTR_NOACK_MAP, + + NL80211_ATTR_INACTIVITY_TIMEOUT, + + NL80211_ATTR_RX_SIGNAL_DBM, + + NL80211_ATTR_BG_SCAN_PERIOD, + + NL80211_ATTR_WDEV, + + NL80211_ATTR_USER_REG_HINT_TYPE, + + NL80211_ATTR_CONN_FAILED_REASON, + + NL80211_ATTR_AUTH_DATA, + + NL80211_ATTR_VHT_CAPABILITY, + + NL80211_ATTR_SCAN_FLAGS, + + NL80211_ATTR_CHANNEL_WIDTH, + NL80211_ATTR_CENTER_FREQ1, + NL80211_ATTR_CENTER_FREQ2, + + NL80211_ATTR_P2P_CTWINDOW, + NL80211_ATTR_P2P_OPPPS, + + NL80211_ATTR_LOCAL_MESH_POWER_MODE, + + NL80211_ATTR_ACL_POLICY, + + NL80211_ATTR_MAC_ADDRS, + + NL80211_ATTR_MAC_ACL_MAX, + + NL80211_ATTR_RADAR_EVENT, + + NL80211_ATTR_EXT_CAPA, + NL80211_ATTR_EXT_CAPA_MASK, + + NL80211_ATTR_STA_CAPABILITY, + NL80211_ATTR_STA_EXT_CAPABILITY, + + NL80211_ATTR_PROTOCOL_FEATURES, + NL80211_ATTR_SPLIT_WIPHY_DUMP, + + NL80211_ATTR_DISABLE_VHT, + NL80211_ATTR_VHT_CAPABILITY_MASK, + + NL80211_ATTR_MDID, + NL80211_ATTR_IE_RIC, + + NL80211_ATTR_CRIT_PROT_ID, + NL80211_ATTR_MAX_CRIT_PROT_DURATION, + + NL80211_ATTR_PEER_AID, + + NL80211_ATTR_COALESCE_RULE, + + NL80211_ATTR_CH_SWITCH_COUNT, + NL80211_ATTR_CH_SWITCH_BLOCK_TX, + NL80211_ATTR_CSA_IES, + NL80211_ATTR_CSA_C_OFF_BEACON, + NL80211_ATTR_CSA_C_OFF_PRESP, + + NL80211_ATTR_RXMGMT_FLAGS, + + NL80211_ATTR_STA_SUPPORTED_CHANNELS, + + NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES, + + NL80211_ATTR_HANDLE_DFS, + + NL80211_ATTR_SUPPORT_5_MHZ, + NL80211_ATTR_SUPPORT_10_MHZ, + + NL80211_ATTR_OPMODE_NOTIF, + + NL80211_ATTR_VENDOR_ID, + NL80211_ATTR_VENDOR_SUBCMD, + NL80211_ATTR_VENDOR_DATA, + NL80211_ATTR_VENDOR_EVENTS, + + NL80211_ATTR_QOS_MAP, + + NL80211_ATTR_MAC_HINT, + NL80211_ATTR_WIPHY_FREQ_HINT, + + NL80211_ATTR_MAX_AP_ASSOC_STA, + + NL80211_ATTR_TDLS_PEER_CAPABILITY, + + NL80211_ATTR_SOCKET_OWNER, + + NL80211_ATTR_CSA_C_OFFSETS_TX, + NL80211_ATTR_MAX_CSA_COUNTERS, + + NL80211_ATTR_TDLS_INITIATOR, + + NL80211_ATTR_USE_RRM, + + NL80211_ATTR_WIPHY_DYN_ACK, + + NL80211_ATTR_TSID, + NL80211_ATTR_USER_PRIO, + NL80211_ATTR_ADMITTED_TIME, + + NL80211_ATTR_SMPS_MODE, + + NL80211_ATTR_OPER_CLASS, + + NL80211_ATTR_MAC_MASK, + + NL80211_ATTR_WIPHY_SELF_MANAGED_REG, + + NL80211_ATTR_EXT_FEATURES, + + NL80211_ATTR_SURVEY_RADIO_STATS, + + NL80211_ATTR_NETNS_FD, + + NL80211_ATTR_SCHED_SCAN_DELAY, + + NL80211_ATTR_REG_INDOOR, + + NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS, + NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL, + NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, + NL80211_ATTR_SCHED_SCAN_PLANS, + + NL80211_ATTR_PBSS, + + NL80211_ATTR_BSS_SELECT, + + NL80211_ATTR_STA_SUPPORT_P2P_PS, + + NL80211_ATTR_PAD, + + NL80211_ATTR_IFTYPE_EXT_CAPA, + + NL80211_ATTR_MU_MIMO_GROUP_DATA, + NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR, + + NL80211_ATTR_SCAN_START_TIME_TSF, + NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, + NL80211_ATTR_MEASUREMENT_DURATION, + NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY, + + NL80211_ATTR_MESH_PEER_AID, + + NL80211_ATTR_NAN_MASTER_PREF, + NL80211_ATTR_BANDS, + NL80211_ATTR_NAN_FUNC, + NL80211_ATTR_NAN_MATCH, + + NL80211_ATTR_FILS_KEK, + NL80211_ATTR_FILS_NONCES, + + NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED, + + NL80211_ATTR_BSSID, + + NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI, + NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST, + + NL80211_ATTR_TIMEOUT_REASON, + + NL80211_ATTR_FILS_ERP_USERNAME, + NL80211_ATTR_FILS_ERP_REALM, + NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM, + NL80211_ATTR_FILS_ERP_RRK, + NL80211_ATTR_FILS_CACHE_ID, + + NL80211_ATTR_PMK, + + NL80211_ATTR_SCHED_SCAN_MULTI, + NL80211_ATTR_SCHED_SCAN_MAX_REQS, + + NL80211_ATTR_WANT_1X_4WAY_HS, + NL80211_ATTR_PMKR0_NAME, + NL80211_ATTR_PORT_AUTHORIZED, + + NL80211_ATTR_EXTERNAL_AUTH_ACTION, + NL80211_ATTR_EXTERNAL_AUTH_SUPPORT, + + NL80211_ATTR_NSS, + NL80211_ATTR_ACK_SIGNAL, + + NL80211_ATTR_CONTROL_PORT_OVER_NL80211, + + NL80211_ATTR_TXQ_STATS, + NL80211_ATTR_TXQ_LIMIT, + NL80211_ATTR_TXQ_MEMORY_LIMIT, + NL80211_ATTR_TXQ_QUANTUM, + + NL80211_ATTR_HE_CAPABILITY, + + NL80211_ATTR_FTM_RESPONDER, + + NL80211_ATTR_FTM_RESPONDER_STATS, + + NL80211_ATTR_TIMEOUT, + + NL80211_ATTR_PEER_MEASUREMENTS, + + NL80211_ATTR_AIRTIME_WEIGHT, + NL80211_ATTR_STA_TX_POWER_SETTING, + NL80211_ATTR_STA_TX_POWER, + + NL80211_ATTR_SAE_PASSWORD, + + NL80211_ATTR_TWT_RESPONDER, + + NL80211_ATTR_HE_OBSS_PD, + + NL80211_ATTR_WIPHY_EDMG_CHANNELS, + NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, + + /* add attributes here, update the policy in nl80211.c */ + + __NL80211_ATTR_AFTER_LAST, + NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST, + NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 +}; + +/* source-level API compatibility */ +#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION +#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG +#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER +#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA + +/* + * Allow user space programs to use #ifdef on new attributes by defining them + * here + */ +#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT +#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY +#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES +#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS +#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ +#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE +#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE +#define NL80211_ATTR_IE NL80211_ATTR_IE +#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR +#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE +#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME +#define NL80211_ATTR_SSID NL80211_ATTR_SSID +#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE +#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE +#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE +#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP +#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS +#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES +#define NL80211_ATTR_KEY NL80211_ATTR_KEY +#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS +#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS + +#define NL80211_WIPHY_NAME_MAXLEN 64 + +#define NL80211_MAX_SUPP_RATES 32 +#define NL80211_MAX_SUPP_HT_RATES 77 +#define NL80211_MAX_SUPP_REG_RULES 128 +#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 +#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 +#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 +#define NL80211_HT_CAPABILITY_LEN 26 +#define NL80211_VHT_CAPABILITY_LEN 12 +#define NL80211_HE_MIN_CAPABILITY_LEN 16 +#define NL80211_HE_MAX_CAPABILITY_LEN 54 +#define NL80211_MAX_NR_CIPHER_SUITES 5 +#define NL80211_MAX_NR_AKM_SUITES 2 + +#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 + +/* default RSSI threshold for scan results if none specified. */ +#define NL80211_SCAN_RSSI_THOLD_OFF -300 + +#define NL80211_CQM_TXE_MAX_INTVL 1800 + +/** + * enum nl80211_iftype - (virtual) interface types + * + * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides + * @NL80211_IFTYPE_ADHOC: independent BSS member + * @NL80211_IFTYPE_STATION: managed BSS member + * @NL80211_IFTYPE_AP: access point + * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces + * are a bit special in that they must always be tied to a pre-existing + * AP type interface. + * @NL80211_IFTYPE_WDS: wireless distribution interface + * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames + * @NL80211_IFTYPE_MESH_POINT: mesh point + * @NL80211_IFTYPE_P2P_CLIENT: P2P client + * @NL80211_IFTYPE_P2P_GO: P2P group owner + * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev + * and therefore can't be created in the normal ways, use the + * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE + * commands to create and destroy one + * @NL80211_IF_TYPE_OCB: Outside Context of a BSS + * This mode corresponds to the MIB variable dot11OCBActivated=true + * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev) + * @NL80211_IFTYPE_MAX: highest interface type number currently defined + * @NUM_NL80211_IFTYPES: number of defined interface types + * + * These values are used with the %NL80211_ATTR_IFTYPE + * to set the type of an interface. + * + */ +enum nl80211_iftype { + NL80211_IFTYPE_UNSPECIFIED, + NL80211_IFTYPE_ADHOC, + NL80211_IFTYPE_STATION, + NL80211_IFTYPE_AP, + NL80211_IFTYPE_AP_VLAN, + NL80211_IFTYPE_WDS, + NL80211_IFTYPE_MONITOR, + NL80211_IFTYPE_MESH_POINT, + NL80211_IFTYPE_P2P_CLIENT, + NL80211_IFTYPE_P2P_GO, + NL80211_IFTYPE_P2P_DEVICE, + NL80211_IFTYPE_OCB, + NL80211_IFTYPE_NAN, + + /* keep last */ + NUM_NL80211_IFTYPES, + NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 +}; + +/** + * enum nl80211_sta_flags - station flags + * + * Station flags. When a station is added to an AP interface, it is + * assumed to be already associated (and hence authenticated.) + * + * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved + * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) + * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames + * with short barker preamble + * @NL80211_STA_FLAG_WME: station is WME/QoS capable + * @NL80211_STA_FLAG_MFP: station uses management frame protection + * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated + * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should + * only be used in managed mode (even in the flags mask). Note that the + * flag can't be changed, it is only valid while adding a station, and + * attempts to change it will silently be ignored (rather than rejected + * as errors.) + * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers + * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a + * previously added station into associated state + * @NL80211_STA_FLAG_MAX: highest station flag number currently defined + * @__NL80211_STA_FLAG_AFTER_LAST: internal use + */ +enum nl80211_sta_flags { + __NL80211_STA_FLAG_INVALID, + NL80211_STA_FLAG_AUTHORIZED, + NL80211_STA_FLAG_SHORT_PREAMBLE, + NL80211_STA_FLAG_WME, + NL80211_STA_FLAG_MFP, + NL80211_STA_FLAG_AUTHENTICATED, + NL80211_STA_FLAG_TDLS_PEER, + NL80211_STA_FLAG_ASSOCIATED, + + /* keep last */ + __NL80211_STA_FLAG_AFTER_LAST, + NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sta_p2p_ps_status - station support of P2P PS + * + * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism + * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism + * @NUM_NL80211_P2P_PS_STATUS: number of values + */ +enum nl80211_sta_p2p_ps_status { + NL80211_P2P_PS_UNSUPPORTED = 0, + NL80211_P2P_PS_SUPPORTED, + + NUM_NL80211_P2P_PS_STATUS, +}; + +#define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER + +/** + * struct nl80211_sta_flag_update - station flags mask/set + * @mask: mask of station flags to set + * @set: which values to set them to + * + * Both mask and set contain bits as per &enum nl80211_sta_flags. + */ +struct nl80211_sta_flag_update { + __u32 mask; + __u32 set; +} __attribute__((packed)); + +/** + * enum nl80211_he_gi - HE guard interval + * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec + * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec + * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec + */ +enum nl80211_he_gi { + NL80211_RATE_INFO_HE_GI_0_8, + NL80211_RATE_INFO_HE_GI_1_6, + NL80211_RATE_INFO_HE_GI_3_2, +}; + +/** + * enum nl80211_he_ru_alloc - HE RU allocation values + * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation + * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation + */ +enum nl80211_he_ru_alloc { + NL80211_RATE_INFO_HE_RU_ALLOC_26, + NL80211_RATE_INFO_HE_RU_ALLOC_52, + NL80211_RATE_INFO_HE_RU_ALLOC_106, + NL80211_RATE_INFO_HE_RU_ALLOC_242, + NL80211_RATE_INFO_HE_RU_ALLOC_484, + NL80211_RATE_INFO_HE_RU_ALLOC_996, + NL80211_RATE_INFO_HE_RU_ALLOC_2x996, +}; + +/** + * enum nl80211_rate_info - bitrate information + * + * These attribute types are used with %NL80211_STA_INFO_TXRATE + * when getting information about the bitrate of a station. + * There are 2 attributes for bitrate, a legacy one that represents + * a 16-bit value, and new one that represents a 32-bit value. + * If the rate value fits into 16 bit, both attributes are reported + * with the same value. If the rate is too high to fit into 16 bits + * (>6.5535Gbps) only 32-bit attribute is included. + * User space tools encouraged to use the 32-bit attribute and fall + * back to the 16-bit one for compatibility with older kernels. + * + * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved + * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) + * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) + * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate + * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval + * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) + * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined + * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) + * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) + * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate + * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the + * same as 160 for purposes of the bitrates + * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate + * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is + * a legacy rate and will be reported as the actual bitrate, i.e. + * half the base (20 MHz) rate + * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is + * a legacy rate and will be reported as the actual bitrate, i.e. + * a quarter of the base (20 MHz) rate + * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11) + * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8) + * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier + * (u8, see &enum nl80211_he_gi) + * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) + * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then + * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) + * @__NL80211_RATE_INFO_AFTER_LAST: internal use + */ +enum nl80211_rate_info { + __NL80211_RATE_INFO_INVALID, + NL80211_RATE_INFO_BITRATE, + NL80211_RATE_INFO_MCS, + NL80211_RATE_INFO_40_MHZ_WIDTH, + NL80211_RATE_INFO_SHORT_GI, + NL80211_RATE_INFO_BITRATE32, + NL80211_RATE_INFO_VHT_MCS, + NL80211_RATE_INFO_VHT_NSS, + NL80211_RATE_INFO_80_MHZ_WIDTH, + NL80211_RATE_INFO_80P80_MHZ_WIDTH, + NL80211_RATE_INFO_160_MHZ_WIDTH, + NL80211_RATE_INFO_10_MHZ_WIDTH, + NL80211_RATE_INFO_5_MHZ_WIDTH, + NL80211_RATE_INFO_HE_MCS, + NL80211_RATE_INFO_HE_NSS, + NL80211_RATE_INFO_HE_GI, + NL80211_RATE_INFO_HE_DCM, + NL80211_RATE_INFO_HE_RU_ALLOC, + + /* keep last */ + __NL80211_RATE_INFO_AFTER_LAST, + NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sta_bss_param - BSS information collected by STA + * + * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM + * when getting information about the bitrate of a station. + * + * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved + * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag) + * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled + * (flag) + * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled + * (flag) + * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8) + * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16) + * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined + * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use + */ +enum nl80211_sta_bss_param { + __NL80211_STA_BSS_PARAM_INVALID, + NL80211_STA_BSS_PARAM_CTS_PROT, + NL80211_STA_BSS_PARAM_SHORT_PREAMBLE, + NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME, + NL80211_STA_BSS_PARAM_DTIM_PERIOD, + NL80211_STA_BSS_PARAM_BEACON_INTERVAL, + + /* keep last */ + __NL80211_STA_BSS_PARAM_AFTER_LAST, + NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sta_info - station information + * + * These attribute types are used with %NL80211_ATTR_STA_INFO + * when getting information about a station. + * + * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved + * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) + * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length) + * (u32, from this station) + * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length) + * (u32, to this station) + * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length) + * (u64, from this station) + * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length) + * (u64, to this station) + * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) + * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute + * containing info as possible, see &enum nl80211_rate_info + * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs) + * (u32, from this station) + * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs) + * (u32, to this station) + * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station) + * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs) + * (u32, to this station) + * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) + * @NL80211_STA_INFO_LLID: the station's mesh LLID + * @NL80211_STA_INFO_PLID: the station's mesh PLID + * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station + * (see %enum nl80211_plink_state) + * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested + * attribute, like NL80211_STA_INFO_TX_BITRATE. + * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute + * containing info as possible, see &enum nl80211_sta_bss_param + * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected + * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. + * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) + * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) + * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode + * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode + * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards + * non-peer STA + * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU + * Contains a nested array of signal strength attributes (u8, dBm) + * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average + * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. + * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the + * 802.11 header (u32, kbps) + * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons + * (u64) + * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64) + * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average + * for beacons only (u8, dBm) + * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats) + * This is a nested attribute where each the inner attribute number is the + * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames; + * each one of those is again nested with &enum nl80211_tid_stats + * attributes carrying the actual values. + * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames + * received from the station (u64, usec) + * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment + * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm) + * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm) + * @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs) + * (u32, from this station) + * @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received + * with an FCS error (u32, from this station). This count may not include + * some packets with an FCS error due to TA corruption. Hence this counter + * might not be fully accurate. + * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a + * mesh gate (u8, 0 or 1) + * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames + * sent to the station (u64, usec) + * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16) + * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station + * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds) + * of STA's association + * @__NL80211_STA_INFO_AFTER_LAST: internal + * @NL80211_STA_INFO_MAX: highest possible station info attribute + */ +enum nl80211_sta_info { + __NL80211_STA_INFO_INVALID, + NL80211_STA_INFO_INACTIVE_TIME, + NL80211_STA_INFO_RX_BYTES, + NL80211_STA_INFO_TX_BYTES, + NL80211_STA_INFO_LLID, + NL80211_STA_INFO_PLID, + NL80211_STA_INFO_PLINK_STATE, + NL80211_STA_INFO_SIGNAL, + NL80211_STA_INFO_TX_BITRATE, + NL80211_STA_INFO_RX_PACKETS, + NL80211_STA_INFO_TX_PACKETS, + NL80211_STA_INFO_TX_RETRIES, + NL80211_STA_INFO_TX_FAILED, + NL80211_STA_INFO_SIGNAL_AVG, + NL80211_STA_INFO_RX_BITRATE, + NL80211_STA_INFO_BSS_PARAM, + NL80211_STA_INFO_CONNECTED_TIME, + NL80211_STA_INFO_STA_FLAGS, + NL80211_STA_INFO_BEACON_LOSS, + NL80211_STA_INFO_T_OFFSET, + NL80211_STA_INFO_LOCAL_PM, + NL80211_STA_INFO_PEER_PM, + NL80211_STA_INFO_NONPEER_PM, + NL80211_STA_INFO_RX_BYTES64, + NL80211_STA_INFO_TX_BYTES64, + NL80211_STA_INFO_CHAIN_SIGNAL, + NL80211_STA_INFO_CHAIN_SIGNAL_AVG, + NL80211_STA_INFO_EXPECTED_THROUGHPUT, + NL80211_STA_INFO_RX_DROP_MISC, + NL80211_STA_INFO_BEACON_RX, + NL80211_STA_INFO_BEACON_SIGNAL_AVG, + NL80211_STA_INFO_TID_STATS, + NL80211_STA_INFO_RX_DURATION, + NL80211_STA_INFO_PAD, + NL80211_STA_INFO_ACK_SIGNAL, + NL80211_STA_INFO_ACK_SIGNAL_AVG, + NL80211_STA_INFO_RX_MPDUS, + NL80211_STA_INFO_FCS_ERROR_COUNT, + NL80211_STA_INFO_CONNECTED_TO_GATE, + NL80211_STA_INFO_TX_DURATION, + NL80211_STA_INFO_AIRTIME_WEIGHT, + NL80211_STA_INFO_AIRTIME_LINK_METRIC, + NL80211_STA_INFO_ASSOC_AT_BOOTTIME, + + /* keep last */ + __NL80211_STA_INFO_AFTER_LAST, + NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 +}; + +/* we renamed this - stay compatible */ +#define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG + + +/** + * enum nl80211_tid_stats - per TID statistics attributes + * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved + * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64) + * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or + * attempted to transmit; u64) + * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for + * transmitted MSDUs (not counting the first attempt; u64) + * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted + * MSDUs (u64) + * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment + * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute) + * @NUM_NL80211_TID_STATS: number of attributes here + * @NL80211_TID_STATS_MAX: highest numbered attribute here + */ +enum nl80211_tid_stats { + __NL80211_TID_STATS_INVALID, + NL80211_TID_STATS_RX_MSDU, + NL80211_TID_STATS_TX_MSDU, + NL80211_TID_STATS_TX_MSDU_RETRIES, + NL80211_TID_STATS_TX_MSDU_FAILED, + NL80211_TID_STATS_PAD, + NL80211_TID_STATS_TXQ_STATS, + + /* keep last */ + NUM_NL80211_TID_STATS, + NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1 +}; + +/** + * enum nl80211_txq_stats - per TXQ statistics attributes + * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved + * @NUM_NL80211_TXQ_STATS: number of attributes here + * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged + * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently + * backlogged + * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen + * @NL80211_TXQ_STATS_DROPS: total number of packet drops + * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks + * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow + * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow + * (only for per-phy stats) + * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions + * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ + * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ + * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY + * @NL80211_TXQ_STATS_MAX: highest numbered attribute here + */ +enum nl80211_txq_stats { + __NL80211_TXQ_STATS_INVALID, + NL80211_TXQ_STATS_BACKLOG_BYTES, + NL80211_TXQ_STATS_BACKLOG_PACKETS, + NL80211_TXQ_STATS_FLOWS, + NL80211_TXQ_STATS_DROPS, + NL80211_TXQ_STATS_ECN_MARKS, + NL80211_TXQ_STATS_OVERLIMIT, + NL80211_TXQ_STATS_OVERMEMORY, + NL80211_TXQ_STATS_COLLISIONS, + NL80211_TXQ_STATS_TX_BYTES, + NL80211_TXQ_STATS_TX_PACKETS, + NL80211_TXQ_STATS_MAX_FLOWS, + + /* keep last */ + NUM_NL80211_TXQ_STATS, + NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1 +}; + +/** + * enum nl80211_mpath_flags - nl80211 mesh path flags + * + * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active + * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running + * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN + * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set + * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded + */ +enum nl80211_mpath_flags { + NL80211_MPATH_FLAG_ACTIVE = 1<<0, + NL80211_MPATH_FLAG_RESOLVING = 1<<1, + NL80211_MPATH_FLAG_SN_VALID = 1<<2, + NL80211_MPATH_FLAG_FIXED = 1<<3, + NL80211_MPATH_FLAG_RESOLVED = 1<<4, +}; + +/** + * enum nl80211_mpath_info - mesh path information + * + * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting + * information about a mesh path. + * + * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved + * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination + * @NL80211_MPATH_INFO_SN: destination sequence number + * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path + * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now + * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in + * &enum nl80211_mpath_flags; + * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec + * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries + * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination + * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination + * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number + * currently defined + * @__NL80211_MPATH_INFO_AFTER_LAST: internal use + */ +enum nl80211_mpath_info { + __NL80211_MPATH_INFO_INVALID, + NL80211_MPATH_INFO_FRAME_QLEN, + NL80211_MPATH_INFO_SN, + NL80211_MPATH_INFO_METRIC, + NL80211_MPATH_INFO_EXPTIME, + NL80211_MPATH_INFO_FLAGS, + NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, + NL80211_MPATH_INFO_DISCOVERY_RETRIES, + NL80211_MPATH_INFO_HOP_COUNT, + NL80211_MPATH_INFO_PATH_CHANGE, + + /* keep last */ + __NL80211_MPATH_INFO_AFTER_LAST, + NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 +}; + +/** + * enum nl80211_band_iftype_attr - Interface type data attributes + * + * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute + * for each interface type that supports the band data + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE + * capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE + * capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE + * capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as + * defined in HE capabilities IE + * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently + * defined + * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use + */ +enum nl80211_band_iftype_attr { + __NL80211_BAND_IFTYPE_ATTR_INVALID, + + NL80211_BAND_IFTYPE_ATTR_IFTYPES, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, + NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, + + /* keep last */ + __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, + NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_band_attr - band attributes + * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, + * an array of nested frequency attributes + * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, + * an array of nested bitrate attributes + * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as + * defined in 802.11n + * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE + * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n + * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n + * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as + * defined in 802.11ac + * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE + * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using + * attributes from &enum nl80211_band_iftype_attr + * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz + * channel(s) that are allowed to be used for EDMG transmissions. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. + * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes + * the allowed channel bandwidth configurations. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. + * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined + * @__NL80211_BAND_ATTR_AFTER_LAST: internal use + */ +enum nl80211_band_attr { + __NL80211_BAND_ATTR_INVALID, + NL80211_BAND_ATTR_FREQS, + NL80211_BAND_ATTR_RATES, + + NL80211_BAND_ATTR_HT_MCS_SET, + NL80211_BAND_ATTR_HT_CAPA, + NL80211_BAND_ATTR_HT_AMPDU_FACTOR, + NL80211_BAND_ATTR_HT_AMPDU_DENSITY, + + NL80211_BAND_ATTR_VHT_MCS_SET, + NL80211_BAND_ATTR_VHT_CAPA, + NL80211_BAND_ATTR_IFTYPE_DATA, + + NL80211_BAND_ATTR_EDMG_CHANNELS, + NL80211_BAND_ATTR_EDMG_BW_CONFIG, + + /* keep last */ + __NL80211_BAND_ATTR_AFTER_LAST, + NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 +}; + +#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA + +/** + * enum nl80211_wmm_rule - regulatory wmm rule + * + * @__NL80211_WMMR_INVALID: attribute number 0 is reserved + * @NL80211_WMMR_CW_MIN: Minimum contention window slot. + * @NL80211_WMMR_CW_MAX: Maximum contention window slot. + * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space. + * @NL80211_WMMR_TXOP: Maximum allowed tx operation time. + * @nl80211_WMMR_MAX: highest possible wmm rule. + * @__NL80211_WMMR_LAST: Internal use. + */ +enum nl80211_wmm_rule { + __NL80211_WMMR_INVALID, + NL80211_WMMR_CW_MIN, + NL80211_WMMR_CW_MAX, + NL80211_WMMR_AIFSN, + NL80211_WMMR_TXOP, + + /* keep last */ + __NL80211_WMMR_LAST, + NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1 +}; + +/** + * enum nl80211_frequency_attr - frequency attributes + * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz + * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current + * regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation + * are permitted on this channel, this includes sending probe + * requests, or modes of operation that require beaconing. + * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm + * (100 * dBm). + * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS + * (enum nl80211_dfs_state) + * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long + * this channel is in this DFS state. + * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel + * as the primary or any of the secondary channels isn't possible, + * this includes 80+80 channels + * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel + * using this channel as the primary or any of the secondary channels + * isn't possible + * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this + * channel. A channel that has the INDOOR_ONLY attribute can only be + * used when there is a clear assessment that the device is operating in + * an indoor surroundings, i.e., it is connected to AC power (and not + * through portable DC inverters) or is under the control of a master + * that is acting as an AP and is connected to AC power. + * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this + * channel if it's connected concurrently to a BSS on the same channel on + * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz + * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS + * off-channel on a channel that has the IR_CONCURRENT attribute set can be + * done when there is a clear assessment that the device is operating under + * the guidance of an authorized master, i.e., setting up a GO or TDLS + * off-channel while the device is also connected to an AP with DFS and + * radar detection on the UNII band (it is up to user-space, i.e., + * wpa_supplicant to perform the required verifications). Using this + * attribute for IR is disallowed for master interfaces (IBSS, AP). + * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. + * This is a nested attribute that contains the wmm limitation per AC. + * (see &enum nl80211_wmm_rule) + * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number + * currently defined + * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use + * + * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 + * for more information on the FCC description of the relaxations allowed + * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and + * NL80211_FREQUENCY_ATTR_IR_CONCURRENT. + */ +enum nl80211_frequency_attr { + __NL80211_FREQUENCY_ATTR_INVALID, + NL80211_FREQUENCY_ATTR_FREQ, + NL80211_FREQUENCY_ATTR_DISABLED, + NL80211_FREQUENCY_ATTR_NO_IR, + __NL80211_FREQUENCY_ATTR_NO_IBSS, + NL80211_FREQUENCY_ATTR_RADAR, + NL80211_FREQUENCY_ATTR_MAX_TX_POWER, + NL80211_FREQUENCY_ATTR_DFS_STATE, + NL80211_FREQUENCY_ATTR_DFS_TIME, + NL80211_FREQUENCY_ATTR_NO_HT40_MINUS, + NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, + NL80211_FREQUENCY_ATTR_NO_80MHZ, + NL80211_FREQUENCY_ATTR_NO_160MHZ, + NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, + NL80211_FREQUENCY_ATTR_INDOOR_ONLY, + NL80211_FREQUENCY_ATTR_IR_CONCURRENT, + NL80211_FREQUENCY_ATTR_NO_20MHZ, + NL80211_FREQUENCY_ATTR_NO_10MHZ, + NL80211_FREQUENCY_ATTR_WMM, + + /* keep last */ + __NL80211_FREQUENCY_ATTR_AFTER_LAST, + NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 +}; + +#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER +#define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR +#define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR +#define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR +#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \ + NL80211_FREQUENCY_ATTR_IR_CONCURRENT + +/** + * enum nl80211_bitrate_attr - bitrate attributes + * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps + * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported + * in 2.4 GHz band. + * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number + * currently defined + * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use + */ +enum nl80211_bitrate_attr { + __NL80211_BITRATE_ATTR_INVALID, + NL80211_BITRATE_ATTR_RATE, + NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, + + /* keep last */ + __NL80211_BITRATE_ATTR_AFTER_LAST, + NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_initiator - Indicates the initiator of a reg domain request + * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world + * regulatory domain. + * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the + * regulatory domain. + * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the + * wireless core it thinks its knows the regulatory domain we should be in. + * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an + * 802.11 country information element with regulatory information it + * thinks we should consider. cfg80211 only processes the country + * code from the IE, and relies on the regulatory domain information + * structure passed by userspace (CRDA) from our wireless-regdb. + * If a channel is enabled but the country code indicates it should + * be disabled we disable the channel and re-enable it upon disassociation. + */ +enum nl80211_reg_initiator { + NL80211_REGDOM_SET_BY_CORE, + NL80211_REGDOM_SET_BY_USER, + NL80211_REGDOM_SET_BY_DRIVER, + NL80211_REGDOM_SET_BY_COUNTRY_IE, +}; + +/** + * enum nl80211_reg_type - specifies the type of regulatory domain + * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains + * to a specific country. When this is set you can count on the + * ISO / IEC 3166 alpha2 country code being valid. + * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory + * domain. + * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom + * driver specific world regulatory domain. These do not apply system-wide + * and are only applicable to the individual devices which have requested + * them to be applied. + * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product + * of an intersection between two regulatory domains -- the previously + * set regulatory domain on the system and the last accepted regulatory + * domain request to be processed. + */ +enum nl80211_reg_type { + NL80211_REGDOM_TYPE_COUNTRY, + NL80211_REGDOM_TYPE_WORLD, + NL80211_REGDOM_TYPE_CUSTOM_WORLD, + NL80211_REGDOM_TYPE_INTERSECTION, +}; + +/** + * enum nl80211_reg_rule_attr - regulatory rule attributes + * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional + * considerations for a given frequency range. These are the + * &enum nl80211_reg_rule_flags. + * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory + * rule in KHz. This is not a center of frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule + * in KHz. This is not a center a frequency but an actual regulatory + * band edge. + * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this + * frequency range, in KHz. + * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain + * for a given frequency range. The value is in mBi (100 * dBi). + * If you don't have one then don't send this. + * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for + * a given frequency range. The value is in mBm (100 * dBm). + * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. + * If not present or 0 default CAC time will be used. + * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number + * currently defined + * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use + */ +enum nl80211_reg_rule_attr { + __NL80211_REG_RULE_ATTR_INVALID, + NL80211_ATTR_REG_RULE_FLAGS, + + NL80211_ATTR_FREQ_RANGE_START, + NL80211_ATTR_FREQ_RANGE_END, + NL80211_ATTR_FREQ_RANGE_MAX_BW, + + NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, + NL80211_ATTR_POWER_RULE_MAX_EIRP, + + NL80211_ATTR_DFS_CAC_TIME, + + /* keep last */ + __NL80211_REG_RULE_ATTR_AFTER_LAST, + NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_sched_scan_match_attr - scheduled scan match attributes + * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, + * only report BSS with matching SSID. + * (This cannot be used together with BSSID.) + * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a + * BSS in scan results. Filtering is turned off if not specified. Note that + * if this attribute is in a match set of its own, then it is treated as + * the default value for all matchsets with an SSID, rather than being a + * matchset of its own without an RSSI filter. This is due to problems with + * how this API was implemented in the past. Also, due to the same problem, + * the only way to create a matchset with only an RSSI filter (with this + * attribute) is if there's only a single matchset with the RSSI attribute. + * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether + * %NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or + * relative to current bss's RSSI. + * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for + * BSS-es in the specified band is to be adjusted before doing + * RSSI-based BSS selection. The attribute value is a packed structure + * value as specified by &struct nl80211_bss_select_rssi_adjust. + * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching + * (this cannot be used together with SSID). + * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the + * band specific minimum rssi thresholds for the bands defined in + * enum nl80211_band. The minimum rssi threshold value(s32) specific to a + * band shall be encapsulated in attribute with type value equals to one + * of the NL80211_BAND_* defined in enum nl80211_band. For example, the + * minimum rssi threshold value for 2.4GHZ band shall be encapsulated + * within an attribute of type NL80211_BAND_2GHZ. And one or more of such + * attributes will be nested within this attribute. + * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter + * attribute number currently defined + * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use + */ +enum nl80211_sched_scan_match_attr { + __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, + + NL80211_SCHED_SCAN_MATCH_ATTR_SSID, + NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, + NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, + NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, + NL80211_SCHED_SCAN_MATCH_ATTR_BSSID, + NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, + + /* keep last */ + __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, + NL80211_SCHED_SCAN_MATCH_ATTR_MAX = + __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 +}; + +/* only for backward compatibility */ +#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID + +/** + * enum nl80211_reg_rule_flags - regulatory rule flags + * + * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed + * @NL80211_RRF_NO_CCK: CCK modulation not allowed + * @NL80211_RRF_NO_INDOOR: indoor operation not allowed + * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed + * @NL80211_RRF_DFS: DFS support is required to be used + * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links + * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links + * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, + * this includes probe requests or modes of operation that require + * beaconing. + * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated + * base on contiguous rules and wider channels will be allowed to cross + * multiple contiguous/overlapping frequency ranges. + * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT + * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation + * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation + * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed + * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed + */ +enum nl80211_reg_rule_flags { + NL80211_RRF_NO_OFDM = 1<<0, + NL80211_RRF_NO_CCK = 1<<1, + NL80211_RRF_NO_INDOOR = 1<<2, + NL80211_RRF_NO_OUTDOOR = 1<<3, + NL80211_RRF_DFS = 1<<4, + NL80211_RRF_PTP_ONLY = 1<<5, + NL80211_RRF_PTMP_ONLY = 1<<6, + NL80211_RRF_NO_IR = 1<<7, + __NL80211_RRF_NO_IBSS = 1<<8, + NL80211_RRF_AUTO_BW = 1<<11, + NL80211_RRF_IR_CONCURRENT = 1<<12, + NL80211_RRF_NO_HT40MINUS = 1<<13, + NL80211_RRF_NO_HT40PLUS = 1<<14, + NL80211_RRF_NO_80MHZ = 1<<15, + NL80211_RRF_NO_160MHZ = 1<<16, +}; + +#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR +#define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR +#define NL80211_RRF_NO_IR NL80211_RRF_NO_IR +#define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\ + NL80211_RRF_NO_HT40PLUS) +#define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT + +/* For backport compatibility with older userspace */ +#define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) + +/** + * enum nl80211_dfs_regions - regulatory DFS regions + * + * @NL80211_DFS_UNSET: Country has no DFS master region specified + * @NL80211_DFS_FCC: Country follows DFS master rules from FCC + * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI + * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec + */ +enum nl80211_dfs_regions { + NL80211_DFS_UNSET = 0, + NL80211_DFS_FCC = 1, + NL80211_DFS_ETSI = 2, + NL80211_DFS_JP = 3, +}; + +/** + * enum nl80211_user_reg_hint_type - type of user regulatory hint + * + * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always + * assumed if the attribute is not set. + * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular + * base station. Device drivers that have been tested to work + * properly to support this type of hint can enable these hints + * by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature + * capability on the struct wiphy. The wireless core will + * ignore all cell base station hints until at least one device + * present has been registered with the wireless core that + * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a + * supported feature. + * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the + * platform is operating in an indoor environment. + */ +enum nl80211_user_reg_hint_type { + NL80211_USER_REG_HINT_USER = 0, + NL80211_USER_REG_HINT_CELL_BASE = 1, + NL80211_USER_REG_HINT_INDOOR = 2, +}; + +/** + * enum nl80211_survey_info - survey information + * + * These attribute types are used with %NL80211_ATTR_SURVEY_INFO + * when getting information about a survey. + * + * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved + * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel + * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) + * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used + * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio + * was turned on (on channel or globally) + * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary + * channel was sensed busy (either due to activity or energy detect) + * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension + * channel was sensed busy + * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent + * receiving data (on channel or globally) + * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent + * transmitting data (on channel or globally) + * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan + * (on this channel or globally) + * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment + * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent + * receiving frames destined to the local BSS + * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number + * currently defined + * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use + */ +enum nl80211_survey_info { + __NL80211_SURVEY_INFO_INVALID, + NL80211_SURVEY_INFO_FREQUENCY, + NL80211_SURVEY_INFO_NOISE, + NL80211_SURVEY_INFO_IN_USE, + NL80211_SURVEY_INFO_TIME, + NL80211_SURVEY_INFO_TIME_BUSY, + NL80211_SURVEY_INFO_TIME_EXT_BUSY, + NL80211_SURVEY_INFO_TIME_RX, + NL80211_SURVEY_INFO_TIME_TX, + NL80211_SURVEY_INFO_TIME_SCAN, + NL80211_SURVEY_INFO_PAD, + NL80211_SURVEY_INFO_TIME_BSS_RX, + + /* keep last */ + __NL80211_SURVEY_INFO_AFTER_LAST, + NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 +}; + +/* keep old names for compatibility */ +#define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME +#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY +#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY +#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX +#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX + +/** + * enum nl80211_mntr_flags - monitor configuration flags + * + * Monitor configuration flags. + * + * @__NL80211_MNTR_FLAG_INVALID: reserved + * + * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS + * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP + * @NL80211_MNTR_FLAG_CONTROL: pass control frames + * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering + * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. + * overrides all other flags. + * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address + * and ACK incoming unicast packets. + * + * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use + * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag + */ +enum nl80211_mntr_flags { + __NL80211_MNTR_FLAG_INVALID, + NL80211_MNTR_FLAG_FCSFAIL, + NL80211_MNTR_FLAG_PLCPFAIL, + NL80211_MNTR_FLAG_CONTROL, + NL80211_MNTR_FLAG_OTHER_BSS, + NL80211_MNTR_FLAG_COOK_FRAMES, + NL80211_MNTR_FLAG_ACTIVE, + + /* keep last */ + __NL80211_MNTR_FLAG_AFTER_LAST, + NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 +}; + +/** + * enum nl80211_mesh_power_mode - mesh power save modes + * + * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is + * not known or has not been set yet. + * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is + * in Awake state all the time. + * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will + * alternate between Active and Doze states, but will wake up for + * neighbor's beacons. + * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will + * alternate between Active and Doze states, but may not wake up + * for neighbor's beacons. + * + * @__NL80211_MESH_POWER_AFTER_LAST - internal use + * @NL80211_MESH_POWER_MAX - highest possible power save level + */ + +enum nl80211_mesh_power_mode { + NL80211_MESH_POWER_UNKNOWN, + NL80211_MESH_POWER_ACTIVE, + NL80211_MESH_POWER_LIGHT_SLEEP, + NL80211_MESH_POWER_DEEP_SLEEP, + + __NL80211_MESH_POWER_AFTER_LAST, + NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1 +}; + +/** + * enum nl80211_meshconf_params - mesh configuration parameters + * + * Mesh configuration parameters. These can be changed while the mesh is + * active. + * + * @__NL80211_MESHCONF_INVALID: internal use + * + * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in + * millisecond units, used by the Peer Link Open message + * + * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in + * millisecond units, used by the peer link management to close a peer link + * + * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in + * millisecond units + * + * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed + * on this mesh interface + * + * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link + * open retries that can be sent to establish a new peer link instance in a + * mesh + * + * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh + * point. + * + * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open + * peer links when we detect compatible mesh peers. Disabled if + * @NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are + * set. + * + * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames + * containing a PREQ that an MP can send to a particular destination (path + * target) + * + * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths + * (in milliseconds) + * + * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait + * until giving up on a path discovery (in milliseconds) + * + * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh + * points receiving a PREQ shall consider the forwarding information from + * the root to be valid. (TU = time unit) + * + * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in + * TUs) during which an MP can send only one action frame containing a PREQ + * reference element + * + * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) + * that it takes for an HWMP information element to propagate across the + * mesh + * + * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not + * + * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a + * source mesh point for path selection elements. + * + * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between + * root announcements are transmitted. + * + * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has + * access to a broader network beyond the MBSS. This is done via Root + * Announcement frames. + * + * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in + * TUs) during which a mesh STA can send only one Action frame containing a + * PERR element. + * + * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding + * or forwarding entity (default is TRUE - forwarding entity) + * + * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the + * threshold for average signal strength of candidate station to establish + * a peer link. + * + * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors + * to synchronize to for 11s default synchronization method + * (see 11C.12.2.2) + * + * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode. + * + * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * + * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for + * which mesh STAs receiving a proactive PREQ shall consider the forwarding + * information to the root mesh STA to be valid. + * + * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between + * proactive PREQs are transmitted. + * + * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time + * (in TUs) during which a mesh STA can send only one Action frame + * containing a PREQ element for root path confirmation. + * + * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links. + * type &enum nl80211_mesh_power_mode (u32) + * + * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) + * + * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've + * established peering with for longer than this time (in seconds), then + * remove it from the STA's list of peers. You may set this to 0 to disable + * the removal of the STA. Default is 30 minutes. + * + * @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA + * will advertise that it is connected to a gate in the mesh formation + * field. If left unset then the mesh formation field will only + * advertise such if there is an active root mesh path. + * + * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use + */ +enum nl80211_meshconf_params { + __NL80211_MESHCONF_INVALID, + NL80211_MESHCONF_RETRY_TIMEOUT, + NL80211_MESHCONF_CONFIRM_TIMEOUT, + NL80211_MESHCONF_HOLDING_TIMEOUT, + NL80211_MESHCONF_MAX_PEER_LINKS, + NL80211_MESHCONF_MAX_RETRIES, + NL80211_MESHCONF_TTL, + NL80211_MESHCONF_AUTO_OPEN_PLINKS, + NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, + NL80211_MESHCONF_PATH_REFRESH_TIME, + NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, + NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, + NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, + NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, + NL80211_MESHCONF_HWMP_ROOTMODE, + NL80211_MESHCONF_ELEMENT_TTL, + NL80211_MESHCONF_HWMP_RANN_INTERVAL, + NL80211_MESHCONF_GATE_ANNOUNCEMENTS, + NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, + NL80211_MESHCONF_FORWARDING, + NL80211_MESHCONF_RSSI_THRESHOLD, + NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, + NL80211_MESHCONF_HT_OPMODE, + NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, + NL80211_MESHCONF_HWMP_ROOT_INTERVAL, + NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, + NL80211_MESHCONF_POWER_MODE, + NL80211_MESHCONF_AWAKE_WINDOW, + NL80211_MESHCONF_PLINK_TIMEOUT, + NL80211_MESHCONF_CONNECTED_TO_GATE, + + /* keep last */ + __NL80211_MESHCONF_ATTR_AFTER_LAST, + NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_mesh_setup_params - mesh setup parameters + * + * Mesh setup parameters. These are used to start/join a mesh and cannot be + * changed while the mesh is active. + * + * @__NL80211_MESH_SETUP_INVALID: Internal use + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a + * vendor specific path selection algorithm or disable it to use the + * default HWMP. + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a + * vendor specific path metric or disable it to use the default Airtime + * metric. + * + * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a + * robust security network ie, or a vendor specific information element + * that vendors will use to identify the path selection methods and + * metrics in use. + * + * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication + * daemon will be authenticating mesh candidates. + * + * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication + * daemon will be securing peer link frames. AMPE is a secured version of + * Mesh Peering Management (MPM) and is implemented with the assistance of + * a userspace daemon. When this flag is set, the kernel will send peer + * management frames to a userspace daemon that will implement AMPE + * functionality (security capabilities selection, key confirmation, and + * key management). When the flag is unset (default), the kernel can + * autonomously complete (unsecured) mesh peering without the need of a + * userspace daemon. + * + * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a + * vendor specific synchronization method or disable it to use the default + * neighbor offset synchronization + * + * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will + * implement an MPM which handles peer allocation and state. + * + * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication + * method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE). + * Default is no authentication method required. + * + * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number + * + * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use + */ +enum nl80211_mesh_setup_params { + __NL80211_MESH_SETUP_INVALID, + NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, + NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, + NL80211_MESH_SETUP_IE, + NL80211_MESH_SETUP_USERSPACE_AUTH, + NL80211_MESH_SETUP_USERSPACE_AMPE, + NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, + NL80211_MESH_SETUP_USERSPACE_MPM, + NL80211_MESH_SETUP_AUTH_PROTOCOL, + + /* keep last */ + __NL80211_MESH_SETUP_ATTR_AFTER_LAST, + NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_txq_attr - TX queue parameter attributes + * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved + * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*) + * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning + * disabled + * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form + * 2^n-1 in the range 1..32767] + * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form + * 2^n-1 in the range 1..32767] + * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] + * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal + * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number + */ +enum nl80211_txq_attr { + __NL80211_TXQ_ATTR_INVALID, + NL80211_TXQ_ATTR_AC, + NL80211_TXQ_ATTR_TXOP, + NL80211_TXQ_ATTR_CWMIN, + NL80211_TXQ_ATTR_CWMAX, + NL80211_TXQ_ATTR_AIFS, + + /* keep last */ + __NL80211_TXQ_ATTR_AFTER_LAST, + NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 +}; + +enum nl80211_ac { + NL80211_AC_VO, + NL80211_AC_VI, + NL80211_AC_BE, + NL80211_AC_BK, + NL80211_NUM_ACS +}; + +/* backward compat */ +#define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC +#define NL80211_TXQ_Q_VO NL80211_AC_VO +#define NL80211_TXQ_Q_VI NL80211_AC_VI +#define NL80211_TXQ_Q_BE NL80211_AC_BE +#define NL80211_TXQ_Q_BK NL80211_AC_BK + +/** + * enum nl80211_channel_type - channel type + * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel + * @NL80211_CHAN_HT20: 20 MHz HT channel + * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel + * below the control channel + * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel + * above the control channel + */ +enum nl80211_channel_type { + NL80211_CHAN_NO_HT, + NL80211_CHAN_HT20, + NL80211_CHAN_HT40MINUS, + NL80211_CHAN_HT40PLUS +}; + +/** + * enum nl80211_key_mode - Key mode + * + * @NL80211_KEY_RX_TX: (Default) + * Key can be used for Rx and Tx immediately + * + * The following modes can only be selected for unicast keys and when the + * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID: + * + * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY: + * Unicast key can only be used for Rx, Tx not allowed, yet + * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY: + * The unicast key identified by idx and mac is cleared for Tx and becomes + * the preferred Tx key for the station. + */ +enum nl80211_key_mode { + NL80211_KEY_RX_TX, + NL80211_KEY_NO_TX, + NL80211_KEY_SET_TX +}; + +/** + * enum nl80211_chan_width - channel width definitions + * + * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH + * attribute. + * + * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel + * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel + * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well + * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel + * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel + */ +enum nl80211_chan_width { + NL80211_CHAN_WIDTH_20_NOHT, + NL80211_CHAN_WIDTH_20, + NL80211_CHAN_WIDTH_40, + NL80211_CHAN_WIDTH_80, + NL80211_CHAN_WIDTH_80P80, + NL80211_CHAN_WIDTH_160, + NL80211_CHAN_WIDTH_5, + NL80211_CHAN_WIDTH_10, +}; + +/** + * enum nl80211_bss_scan_width - control channel width for a BSS + * + * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute. + * + * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible + * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide + * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide + */ +enum nl80211_bss_scan_width { + NL80211_BSS_CHAN_WIDTH_20, + NL80211_BSS_CHAN_WIDTH_10, + NL80211_BSS_CHAN_WIDTH_5, +}; + +/** + * enum nl80211_bss - netlink attributes for a BSS + * + * @__NL80211_BSS_INVALID: invalid + * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) + * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) + * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) + * (if @NL80211_BSS_PRESP_DATA is present then this is known to be + * from a probe response, otherwise it may be from the same beacon + * that the NL80211_BSS_BEACON_TSF will be from) + * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) + * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) + * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the + * raw information elements from the probe response/beacon (bin); + * if the %NL80211_BSS_BEACON_IES attribute is present and the data is + * different then the IEs here are from a Probe Response frame; otherwise + * they are from a Beacon frame. + * However, if the driver does not indicate the source of the IEs, these + * IEs may be from either frame subtype. + * If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the + * data here is known to be from a probe response, without any heuristics. + * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon + * in mBm (100 * dBm) (s32) + * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon + * in unspecified units, scaled to 0..100 (u8) + * @NL80211_BSS_STATUS: status, if this BSS is "used" + * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms + * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information + * elements from a Beacon frame (bin); not present if no Beacon frame has + * yet been received + * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel + * (u32, enum nl80211_bss_scan_width) + * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64) + * (not present if no beacon frame has been received yet) + * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and + * @NL80211_BSS_TSF is known to be from a probe response (flag attribute) + * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry + * was last updated by a received frame. The value is expected to be + * accurate to about 10ms. (u64, nanoseconds) + * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment + * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first + * octet of the timestamp field of the last beacon/probe received for + * this BSS. The time is the TSF of the BSS specified by + * @NL80211_BSS_PARENT_BSSID. (u64). + * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF + * is set. + * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. + * Contains a nested array of signal strength attributes (u8, dBm), + * using the nesting index as the antenna number. + * @__NL80211_BSS_AFTER_LAST: internal + * @NL80211_BSS_MAX: highest BSS attribute + */ +enum nl80211_bss { + __NL80211_BSS_INVALID, + NL80211_BSS_BSSID, + NL80211_BSS_FREQUENCY, + NL80211_BSS_TSF, + NL80211_BSS_BEACON_INTERVAL, + NL80211_BSS_CAPABILITY, + NL80211_BSS_INFORMATION_ELEMENTS, + NL80211_BSS_SIGNAL_MBM, + NL80211_BSS_SIGNAL_UNSPEC, + NL80211_BSS_STATUS, + NL80211_BSS_SEEN_MS_AGO, + NL80211_BSS_BEACON_IES, + NL80211_BSS_CHAN_WIDTH, + NL80211_BSS_BEACON_TSF, + NL80211_BSS_PRESP_DATA, + NL80211_BSS_LAST_SEEN_BOOTTIME, + NL80211_BSS_PAD, + NL80211_BSS_PARENT_TSF, + NL80211_BSS_PARENT_BSSID, + NL80211_BSS_CHAIN_SIGNAL, + + /* keep last */ + __NL80211_BSS_AFTER_LAST, + NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 +}; + +/** + * enum nl80211_bss_status - BSS "status" + * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. + * Note that this is no longer used since cfg80211 no longer + * keeps track of whether or not authentication was done with + * a given BSS. + * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. + * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. + * + * The BSS status is a BSS attribute in scan dumps, which + * indicates the status the interface has wrt. this BSS. + */ +enum nl80211_bss_status { + NL80211_BSS_STATUS_AUTHENTICATED, + NL80211_BSS_STATUS_ASSOCIATED, + NL80211_BSS_STATUS_IBSS_JOINED, +}; + +/** + * enum nl80211_auth_type - AuthenticationType + * + * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication + * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) + * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) + * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) + * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals + * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key + * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS + * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key + * @__NL80211_AUTHTYPE_NUM: internal + * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm + * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by + * trying multiple times); this is invalid in netlink -- leave out + * the attribute for this on CONNECT commands. + */ +enum nl80211_auth_type { + NL80211_AUTHTYPE_OPEN_SYSTEM, + NL80211_AUTHTYPE_SHARED_KEY, + NL80211_AUTHTYPE_FT, + NL80211_AUTHTYPE_NETWORK_EAP, + NL80211_AUTHTYPE_SAE, + NL80211_AUTHTYPE_FILS_SK, + NL80211_AUTHTYPE_FILS_SK_PFS, + NL80211_AUTHTYPE_FILS_PK, + + /* keep last */ + __NL80211_AUTHTYPE_NUM, + NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, + NL80211_AUTHTYPE_AUTOMATIC +}; + +/** + * enum nl80211_key_type - Key Type + * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key + * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key + * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) + * @NUM_NL80211_KEYTYPES: number of defined key types + */ +enum nl80211_key_type { + NL80211_KEYTYPE_GROUP, + NL80211_KEYTYPE_PAIRWISE, + NL80211_KEYTYPE_PEERKEY, + + NUM_NL80211_KEYTYPES +}; + +/** + * enum nl80211_mfp - Management frame protection state + * @NL80211_MFP_NO: Management frame protection not used + * @NL80211_MFP_REQUIRED: Management frame protection required + * @NL80211_MFP_OPTIONAL: Management frame protection is optional + */ +enum nl80211_mfp { + NL80211_MFP_NO, + NL80211_MFP_REQUIRED, + NL80211_MFP_OPTIONAL, +}; + +enum nl80211_wpa_versions { + NL80211_WPA_VERSION_1 = 1 << 0, + NL80211_WPA_VERSION_2 = 1 << 1, + NL80211_WPA_VERSION_3 = 1 << 2, +}; + +/** + * enum nl80211_key_default_types - key default types + * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid + * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default + * unicast key + * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default + * multicast key + * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types + */ +enum nl80211_key_default_types { + __NL80211_KEY_DEFAULT_TYPE_INVALID, + NL80211_KEY_DEFAULT_TYPE_UNICAST, + NL80211_KEY_DEFAULT_TYPE_MULTICAST, + + NUM_NL80211_KEY_DEFAULT_TYPES +}; + +/** + * enum nl80211_key_attributes - key attributes + * @__NL80211_KEY_INVALID: invalid + * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of + * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC + * keys + * @NL80211_KEY_IDX: key ID (u8, 0-3) + * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 + * section 7.3.2.25.1, e.g. 0x000FAC04) + * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and + * CCMP keys, each six bytes in little endian + * @NL80211_KEY_DEFAULT: flag indicating default key + * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key + * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not + * specified the default depends on whether a MAC address was + * given with the command using the key or not (u32) + * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags + * attributes, specifying what a key should be set as default as. + * See &enum nl80211_key_default_types. + * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. + * Defaults to @NL80211_KEY_RX_TX. + * + * @__NL80211_KEY_AFTER_LAST: internal + * @NL80211_KEY_MAX: highest key attribute + */ +enum nl80211_key_attributes { + __NL80211_KEY_INVALID, + NL80211_KEY_DATA, + NL80211_KEY_IDX, + NL80211_KEY_CIPHER, + NL80211_KEY_SEQ, + NL80211_KEY_DEFAULT, + NL80211_KEY_DEFAULT_MGMT, + NL80211_KEY_TYPE, + NL80211_KEY_DEFAULT_TYPES, + NL80211_KEY_MODE, + + /* keep last */ + __NL80211_KEY_AFTER_LAST, + NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 +}; + +/** + * enum nl80211_tx_rate_attributes - TX rate set attributes + * @__NL80211_TXRATE_INVALID: invalid + * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection + * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with + * 1 = 500 kbps) but without the IE length restriction (at most + * %NL80211_MAX_SUPP_RATES in a single array). + * @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection + * in an array of MCS numbers. + * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, + * see &struct nl80211_txrate_vht + * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi + * @__NL80211_TXRATE_AFTER_LAST: internal + * @NL80211_TXRATE_MAX: highest TX rate attribute + */ +enum nl80211_tx_rate_attributes { + __NL80211_TXRATE_INVALID, + NL80211_TXRATE_LEGACY, + NL80211_TXRATE_HT, + NL80211_TXRATE_VHT, + NL80211_TXRATE_GI, + + /* keep last */ + __NL80211_TXRATE_AFTER_LAST, + NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 +}; + +#define NL80211_TXRATE_MCS NL80211_TXRATE_HT +#define NL80211_VHT_NSS_MAX 8 + +/** + * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap + * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) + */ +struct nl80211_txrate_vht { + __u16 mcs[NL80211_VHT_NSS_MAX]; +}; + +enum nl80211_txrate_gi { + NL80211_TXRATE_DEFAULT_GI, + NL80211_TXRATE_FORCE_SGI, + NL80211_TXRATE_FORCE_LGI, +}; + +/** + * enum nl80211_band - Frequency band + * @NL80211_BAND_2GHZ: 2.4 GHz ISM band + * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) + * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) + * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) + * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace + * since newer kernel versions may support more bands + */ +enum nl80211_band { + NL80211_BAND_2GHZ, + NL80211_BAND_5GHZ, + NL80211_BAND_60GHZ, + NL80211_BAND_6GHZ, + + NUM_NL80211_BANDS, +}; + +/** + * enum nl80211_ps_state - powersave state + * @NL80211_PS_DISABLED: powersave is disabled + * @NL80211_PS_ENABLED: powersave is enabled + */ +enum nl80211_ps_state { + NL80211_PS_DISABLED, + NL80211_PS_ENABLED, +}; + +/** + * enum nl80211_attr_cqm - connection quality monitor attributes + * @__NL80211_ATTR_CQM_INVALID: invalid + * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies + * the threshold for the RSSI level at which an event will be sent. Zero + * to disable. Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is + * set, multiple values can be supplied as a low-to-high sorted array of + * threshold values in dBm. Events will be sent when the RSSI value + * crosses any of the thresholds. + * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies + * the minimum amount the RSSI level must change after an event before a + * new event may be issued (to reduce effects of RSSI oscillation). + * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event + * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many + * consecutive packets were not acknowledged by the peer + * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures + * during the given %NL80211_ATTR_CQM_TXE_INTVL before an + * %NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and + * %NL80211_ATTR_CQM_TXE_PKTS is generated. + * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given + * %NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is + * checked. + * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic + * interval in which %NL80211_ATTR_CQM_TXE_PKTS and + * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an + * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. + * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon + * loss event + * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the + * RSSI threshold event. + * @__NL80211_ATTR_CQM_AFTER_LAST: internal + * @NL80211_ATTR_CQM_MAX: highest key attribute + */ +enum nl80211_attr_cqm { + __NL80211_ATTR_CQM_INVALID, + NL80211_ATTR_CQM_RSSI_THOLD, + NL80211_ATTR_CQM_RSSI_HYST, + NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, + NL80211_ATTR_CQM_PKT_LOSS_EVENT, + NL80211_ATTR_CQM_TXE_RATE, + NL80211_ATTR_CQM_TXE_PKTS, + NL80211_ATTR_CQM_TXE_INTVL, + NL80211_ATTR_CQM_BEACON_LOSS_EVENT, + NL80211_ATTR_CQM_RSSI_LEVEL, + + /* keep last */ + __NL80211_ATTR_CQM_AFTER_LAST, + NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 +}; + +/** + * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event + * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the + * configured threshold + * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the + * configured threshold + * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent) + */ +enum nl80211_cqm_rssi_threshold_event { + NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, + NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, + NL80211_CQM_RSSI_BEACON_LOSS_EVENT, +}; + + +/** + * enum nl80211_tx_power_setting - TX power adjustment + * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power + * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter + * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter + */ +enum nl80211_tx_power_setting { + NL80211_TX_POWER_AUTOMATIC, + NL80211_TX_POWER_LIMITED, + NL80211_TX_POWER_FIXED, +}; + +/** + * enum nl80211_packet_pattern_attr - packet pattern attribute + * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute + * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has + * a zero bit are ignored + * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have + * a bit for each byte in the pattern. The lowest-order bit corresponds + * to the first byte of the pattern, but the bytes of the pattern are + * in a little-endian-like format, i.e. the 9th byte of the pattern + * corresponds to the lowest-order bit in the second byte of the mask. + * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where + * xx indicates "don't care") would be represented by a pattern of + * twelve zero bytes, and a mask of "0xed,0x01". + * Note that the pattern matching is done as though frames were not + * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked + * first (including SNAP header unpacking) and then matched. + * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after + * these fixed number of bytes of received packet + * @NUM_NL80211_PKTPAT: number of attributes + * @MAX_NL80211_PKTPAT: max attribute number + */ +enum nl80211_packet_pattern_attr { + __NL80211_PKTPAT_INVALID, + NL80211_PKTPAT_MASK, + NL80211_PKTPAT_PATTERN, + NL80211_PKTPAT_OFFSET, + + NUM_NL80211_PKTPAT, + MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1, +}; + +/** + * struct nl80211_pattern_support - packet pattern support information + * @max_patterns: maximum number of patterns supported + * @min_pattern_len: minimum length of each pattern + * @max_pattern_len: maximum length of each pattern + * @max_pkt_offset: maximum Rx packet offset + * + * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when + * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in + * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of + * %NL80211_ATTR_COALESCE_RULE in the capability information given + * by the kernel to userspace. + */ +struct nl80211_pattern_support { + __u32 max_patterns; + __u32 min_pattern_len; + __u32 max_pattern_len; + __u32 max_pkt_offset; +} __attribute__((packed)); + +/* only for backward compatibility */ +#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID +#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK +#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN +#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET +#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT +#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT +#define nl80211_wowlan_pattern_support nl80211_pattern_support + +/** + * enum nl80211_wowlan_triggers - WoWLAN trigger definitions + * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes + * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put + * the chip into a special state -- works best with chips that have + * support for low-power operation already (flag) + * Note that this mode is incompatible with all of the others, if + * any others are even supported by the device. + * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect + * is detected is implementation-specific (flag) + * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed + * by 16 repetitions of MAC addr, anywhere in payload) (flag) + * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns + * which are passed in an array of nested attributes, each nested attribute + * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. + * Each pattern defines a wakeup packet. Packet offset is associated with + * each pattern which is used while matching the pattern. The matching is + * done on the MSDU, i.e. as though the packet was an 802.3 packet, so the + * pattern matching is done after the packet is converted to the MSDU. + * + * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute + * carrying a &struct nl80211_pattern_support. + * + * When reporting wakeup. it is a u32 attribute containing the 0-based + * index of the pattern that caused the wakeup, in the patterns passed + * to the kernel when configuring. + * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be + * used when setting, used only to indicate that GTK rekeying is supported + * by the device (flag) + * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if + * done by the device) (flag) + * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request + * packet (flag) + * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) + * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released + * (on devices that have rfkill in the device) (flag) + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains + * the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame + * may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN + * attribute contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211 + * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the + * 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may + * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute + * contains the original length. + * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 + * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 + * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section + * "TCP connection wakeup" for more details. This is a nested attribute + * containing the exact information for establishing and keeping alive + * the TCP connection. + * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the + * wakeup packet was received on the TCP connection + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the + * TCP connection was lost or failed to be established + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, + * the TCP connection ran out of tokens to use for data to send to the + * service + * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network + * is detected. This is a nested attribute that contains the + * same attributes used with @NL80211_CMD_START_SCHED_SCAN. It + * specifies how the scan is performed (e.g. the interval, the + * channels to scan and the initial delay) as well as the scan + * results that will trigger a wake (i.e. the matchsets). This + * attribute is also sent in a response to + * @NL80211_CMD_GET_WIPHY, indicating the number of match sets + * supported by the driver (u32). + * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute + * containing an array with information about what triggered the + * wake up. If no elements are present in the array, it means + * that the information is not available. If more than one + * element is present, it means that more than one match + * occurred. + * Each element in the array is a nested attribute that contains + * one optional %NL80211_ATTR_SSID attribute and one optional + * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of + * these attributes must be present. If + * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one + * frequency, it means that the match occurred in more than one + * channel. + * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers + * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number + * + * These nested attributes are used to configure the wakeup triggers and + * to report the wakeup reason(s). + */ +enum nl80211_wowlan_triggers { + __NL80211_WOWLAN_TRIG_INVALID, + NL80211_WOWLAN_TRIG_ANY, + NL80211_WOWLAN_TRIG_DISCONNECT, + NL80211_WOWLAN_TRIG_MAGIC_PKT, + NL80211_WOWLAN_TRIG_PKT_PATTERN, + NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED, + NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE, + NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, + NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, + NL80211_WOWLAN_TRIG_RFKILL_RELEASE, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, + NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, + NL80211_WOWLAN_TRIG_TCP_CONNECTION, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, + NL80211_WOWLAN_TRIG_NET_DETECT, + NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS, + + /* keep last */ + NUM_NL80211_WOWLAN_TRIG, + MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 +}; + +/** + * DOC: TCP connection wakeup + * + * Some devices can establish a TCP connection in order to be woken up by a + * packet coming in from outside their network segment, or behind NAT. If + * configured, the device will establish a TCP connection to the given + * service, and periodically send data to that service. The first data + * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK. + * The data packets can optionally include a (little endian) sequence + * number (in the TCP payload!) that is generated by the device, and, also + * optionally, a token from a list of tokens. This serves as a keep-alive + * with the service, and for NATed connections, etc. + * + * During this keep-alive period, the server doesn't send any data to the + * client. When receiving data, it is compared against the wakeup pattern + * (and mask) and if it matches, the host is woken up. Similarly, if the + * connection breaks or cannot be established to start with, the host is + * also woken up. + * + * Developer's note: ARP offload is required for this, otherwise TCP + * response packets might not go through correctly. + */ + +/** + * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence + * @start: starting value + * @offset: offset of sequence number in packet + * @len: length of the sequence value to write, 1 through 4 + * + * Note: don't confuse with the TCP sequence number(s), this is for the + * keepalive packet payload. The actual value is written into the packet + * in little endian. + */ +struct nl80211_wowlan_tcp_data_seq { + __u32 start, offset, len; +}; + +/** + * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config + * @offset: offset of token in packet + * @len: length of each token + * @token_stream: stream of data to be used for the tokens, the length must + * be a multiple of @len for this to make sense + */ +struct nl80211_wowlan_tcp_data_token { + __u32 offset, len; + __u8 token_stream[]; +}; + +/** + * struct nl80211_wowlan_tcp_data_token_feature - data token features + * @min_len: minimum token length + * @max_len: maximum token length + * @bufsize: total available token buffer size (max size of @token_stream) + */ +struct nl80211_wowlan_tcp_data_token_feature { + __u32 min_len, max_len, bufsize; +}; + +/** + * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters + * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes + * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order) + * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address + * (in network byte order) + * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because + * route lookup when configured might be invalid by the time we suspend, + * and doing a route lookup when suspending is no longer possible as it + * might require ARP querying. + * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a + * socket and port will be allocated + * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16) + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte. + * For feature advertising, a u32 attribute holding the maximum length + * of the data payload. + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration + * (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature + * advertising it is just a flag + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration, + * see &struct nl80211_wowlan_tcp_data_token and for advertising see + * &struct nl80211_wowlan_tcp_data_token_feature. + * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum + * interval in feature advertising (u32) + * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a + * u32 attribute holding the maximum length + * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for + * feature advertising. The mask works like @NL80211_PKTPAT_MASK + * but on the TCP payload only. + * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes + * @MAX_NL80211_WOWLAN_TCP: highest attribute number + */ +enum nl80211_wowlan_tcp_attrs { + __NL80211_WOWLAN_TCP_INVALID, + NL80211_WOWLAN_TCP_SRC_IPV4, + NL80211_WOWLAN_TCP_DST_IPV4, + NL80211_WOWLAN_TCP_DST_MAC, + NL80211_WOWLAN_TCP_SRC_PORT, + NL80211_WOWLAN_TCP_DST_PORT, + NL80211_WOWLAN_TCP_DATA_PAYLOAD, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, + NL80211_WOWLAN_TCP_DATA_INTERVAL, + NL80211_WOWLAN_TCP_WAKE_PAYLOAD, + NL80211_WOWLAN_TCP_WAKE_MASK, + + /* keep last */ + NUM_NL80211_WOWLAN_TCP, + MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 +}; + +/** + * struct nl80211_coalesce_rule_support - coalesce rule support information + * @max_rules: maximum number of rules supported + * @pat: packet pattern support information + * @max_delay: maximum supported coalescing delay in msecs + * + * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the + * capability information given by the kernel to userspace. + */ +struct nl80211_coalesce_rule_support { + __u32 max_rules; + struct nl80211_pattern_support pat; + __u32 max_delay; +} __attribute__((packed)); + +/** + * enum nl80211_attr_coalesce_rule - coalesce rule attribute + * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute + * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing + * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence, + * see &enum nl80211_coalesce_condition. + * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched + * after these fixed number of bytes of received packet + * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes + * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number + */ +enum nl80211_attr_coalesce_rule { + __NL80211_COALESCE_RULE_INVALID, + NL80211_ATTR_COALESCE_RULE_DELAY, + NL80211_ATTR_COALESCE_RULE_CONDITION, + NL80211_ATTR_COALESCE_RULE_PKT_PATTERN, + + /* keep last */ + NUM_NL80211_ATTR_COALESCE_RULE, + NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1 +}; + +/** + * enum nl80211_coalesce_condition - coalesce rule conditions + * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns + * in a rule are matched. + * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns + * in a rule are not matched. + */ +enum nl80211_coalesce_condition { + NL80211_COALESCE_CONDITION_MATCH, + NL80211_COALESCE_CONDITION_NO_MATCH +}; + +/** + * enum nl80211_iface_limit_attrs - limit attributes + * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) + * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that + * can be chosen from this set of interface types (u32) + * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a + * flag attribute for each interface type in this set + * @NUM_NL80211_IFACE_LIMIT: number of attributes + * @MAX_NL80211_IFACE_LIMIT: highest attribute number + */ +enum nl80211_iface_limit_attrs { + NL80211_IFACE_LIMIT_UNSPEC, + NL80211_IFACE_LIMIT_MAX, + NL80211_IFACE_LIMIT_TYPES, + + /* keep last */ + NUM_NL80211_IFACE_LIMIT, + MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1 +}; + +/** + * enum nl80211_if_combination_attrs -- interface combination attributes + * + * @NL80211_IFACE_COMB_UNSPEC: (reserved) + * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits + * for given interface types, see &enum nl80211_iface_limit_attrs. + * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of + * interfaces that can be created in this group. This number doesn't + * apply to interfaces purely managed in software, which are listed + * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE. + * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that + * beacon intervals within this group must be all the same even for + * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt + * the infrastructure network's beacon interval. + * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many + * different channels may be used within this group. + * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap + * of supported channel widths for radar detection. + * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap + * of supported regulatory regions for radar detection. + * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of + * different beacon intervals supported by all the interface combinations + * in this group (if not present, all beacon intervals be identical). + * @NUM_NL80211_IFACE_COMB: number of attributes + * @MAX_NL80211_IFACE_COMB: highest attribute number + * + * Examples: + * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 + * => allows an AP and a STA that must match BIs + * + * numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8, + * => allows 8 of AP/GO that can have BI gcd >= min gcd + * + * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 + * => allows two STAs on different channels + * + * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 + * => allows a STA plus three P2P interfaces + * + * The list of these four possibilities could completely be contained + * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate + * that any of these groups must match. + * + * "Combinations" of just a single interface will not be listed here, + * a single interface of any valid interface type is assumed to always + * be possible by itself. This means that implicitly, for each valid + * interface type, the following group always exists: + * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1 + */ +enum nl80211_if_combination_attrs { + NL80211_IFACE_COMB_UNSPEC, + NL80211_IFACE_COMB_LIMITS, + NL80211_IFACE_COMB_MAXNUM, + NL80211_IFACE_COMB_STA_AP_BI_MATCH, + NL80211_IFACE_COMB_NUM_CHANNELS, + NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, + NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, + NL80211_IFACE_COMB_BI_MIN_GCD, + + /* keep last */ + NUM_NL80211_IFACE_COMB, + MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1 +}; + + +/** + * enum nl80211_plink_state - state of a mesh peer link finite state machine + * + * @NL80211_PLINK_LISTEN: initial state, considered the implicit + * state of non existent mesh peer links + * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to + * this mesh peer + * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received + * from this mesh peer + * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been + * received from this mesh peer + * @NL80211_PLINK_ESTAB: mesh peer link is established + * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled + * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh + * plink are discarded + * @NUM_NL80211_PLINK_STATES: number of peer link states + * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states + */ +enum nl80211_plink_state { + NL80211_PLINK_LISTEN, + NL80211_PLINK_OPN_SNT, + NL80211_PLINK_OPN_RCVD, + NL80211_PLINK_CNF_RCVD, + NL80211_PLINK_ESTAB, + NL80211_PLINK_HOLDING, + NL80211_PLINK_BLOCKED, + + /* keep last */ + NUM_NL80211_PLINK_STATES, + MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 +}; + +/** + * enum nl80211_plink_action - actions to perform in mesh peers + * + * @NL80211_PLINK_ACTION_NO_ACTION: perform no action + * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment + * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer + * @NUM_NL80211_PLINK_ACTIONS: number of possible actions + */ +enum plink_actions { + NL80211_PLINK_ACTION_NO_ACTION, + NL80211_PLINK_ACTION_OPEN, + NL80211_PLINK_ACTION_BLOCK, + + NUM_NL80211_PLINK_ACTIONS, +}; + + +#define NL80211_KCK_LEN 16 +#define NL80211_KEK_LEN 16 +#define NL80211_REPLAY_CTR_LEN 8 + +/** + * enum nl80211_rekey_data - attributes for GTK rekey offload + * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes + * @NL80211_REKEY_DATA_KEK: key encryption key (binary) + * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) + * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) + * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) + * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) + */ +enum nl80211_rekey_data { + __NL80211_REKEY_DATA_INVALID, + NL80211_REKEY_DATA_KEK, + NL80211_REKEY_DATA_KCK, + NL80211_REKEY_DATA_REPLAY_CTR, + + /* keep last */ + NUM_NL80211_REKEY_DATA, + MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 +}; + +/** + * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID + * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in + * Beacon frames) + * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element + * in Beacon frames + * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID + * element in Beacon frames but zero out each byte in the SSID + */ +enum nl80211_hidden_ssid { + NL80211_HIDDEN_SSID_NOT_IN_USE, + NL80211_HIDDEN_SSID_ZERO_LEN, + NL80211_HIDDEN_SSID_ZERO_CONTENTS +}; + +/** + * enum nl80211_sta_wme_attr - station WME attributes + * @__NL80211_STA_WME_INVALID: invalid number for nested attribute + * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format + * is the same as the AC bitmap in the QoS info field. + * @NL80211_STA_WME_MAX_SP: max service period. the format is the same + * as the MAX_SP field in the QoS info field (but already shifted down). + * @__NL80211_STA_WME_AFTER_LAST: internal + * @NL80211_STA_WME_MAX: highest station WME attribute + */ +enum nl80211_sta_wme_attr { + __NL80211_STA_WME_INVALID, + NL80211_STA_WME_UAPSD_QUEUES, + NL80211_STA_WME_MAX_SP, + + /* keep last */ + __NL80211_STA_WME_AFTER_LAST, + NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 +}; + +/** + * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates + * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes + * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher + * priority) + * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets) + * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag) + * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes + * (internal) + * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute + * (internal) + */ +enum nl80211_pmksa_candidate_attr { + __NL80211_PMKSA_CANDIDATE_INVALID, + NL80211_PMKSA_CANDIDATE_INDEX, + NL80211_PMKSA_CANDIDATE_BSSID, + NL80211_PMKSA_CANDIDATE_PREAUTH, + + /* keep last */ + NUM_NL80211_PMKSA_CANDIDATE, + MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 +}; + +/** + * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION + * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request + * @NL80211_TDLS_SETUP: Setup TDLS link + * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established + * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link + * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link + */ +enum nl80211_tdls_operation { + NL80211_TDLS_DISCOVERY_REQ, + NL80211_TDLS_SETUP, + NL80211_TDLS_TEARDOWN, + NL80211_TDLS_ENABLE_LINK, + NL80211_TDLS_DISABLE_LINK, +}; + +/* + * enum nl80211_ap_sme_features - device-integrated AP features + * Reserved for future use, no bits are defined in + * NL80211_ATTR_DEVICE_AP_SME yet. +enum nl80211_ap_sme_features { +}; + */ + +/** + * enum nl80211_feature_flags - device/driver features + * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back + * TX status to the socket error queue when requested with the + * socket option. + * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. + * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up + * the connected inactive stations in AP mode. + * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested + * to work properly to suppport receiving regulatory hints from + * cellular base stations. + * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only + * here to reserve the value for API/ABI compatibility) + * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of + * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station + * mode + * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan + * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported + * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif + * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting + * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform + * OBSS scans and generate 20/40 BSS coex reports. This flag is used only + * for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied. + * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window + * setting + * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic + * powersave + * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state + * transitions for AP clients. Without this flag (and if the driver + * doesn't have the AP SME in the device) the driver supports adding + * stations only when they're associated and adds them in associated + * state (to later be transitioned into authorized), with this flag + * they should be added before even sending the authentication reply + * and then transitioned into authenticated, associated and authorized + * states using station flags. + * Note that even for drivers that support this, the default is to add + * stations in authenticated/associated state, so to add unauthenticated + * stations the authenticated/associated bits have to be set in the mask. + * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits + * (HT40, VHT 80/160 MHz) if this flag is set + * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh + * Peering Management entity which may be implemented by registering for + * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is + * still generated by the driver. + * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor + * interface. An active monitor interface behaves like a normal monitor + * interface, but gets added to the driver. It ensures that incoming + * unicast packets directed at the configured interface address get ACKed. + * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic + * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the + * lifetime of a BSS. + * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter + * Set IE to probe requests. + * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE + * to probe requests. + * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period + * requests sent to it by an AP. + * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the + * current tx power value into the TPC Report IE in the spectrum + * management TPC Report action frame, and in the Radio Measurement Link + * Measurement Report action frame. + * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout + * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used + * to enable dynack. + * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial + * multiplexing powersave, ie. can turn off all but one chain + * even on HT connections that should be using more chains. + * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial + * multiplexing powersave, ie. can turn off all but one chain + * and then wake the rest up as required after, for example, + * rts/cts handshake. + * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM + * TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS + * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it + * needs to be able to handle Block-Ack agreements and other things. + * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring + * the vif's MAC address upon creation. + * See 'macaddr' field in the vif_params (cfg80211.h). + * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when + * operating as a TDLS peer. + * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a + * random MAC address during scan (if the device is unassociated); the + * %NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC + * address mask/value will be used. + * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports + * using a random MAC address for every scan iteration during scheduled + * scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may + * be set for scheduled scan and the MAC address mask/value will be used. + * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a + * random MAC address for every scan iteration during "net detect", i.e. + * scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may + * be set for scheduled scan and the MAC address mask/value will be used. + */ +enum nl80211_feature_flags { + NL80211_FEATURE_SK_TX_STATUS = 1 << 0, + NL80211_FEATURE_HT_IBSS = 1 << 1, + NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, + NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, + NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, + NL80211_FEATURE_SAE = 1 << 5, + NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, + NL80211_FEATURE_SCAN_FLUSH = 1 << 7, + NL80211_FEATURE_AP_SCAN = 1 << 8, + NL80211_FEATURE_VIF_TXPOWER = 1 << 9, + NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, + NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, + NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, + /* bit 13 is reserved */ + NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, + NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, + NL80211_FEATURE_USERSPACE_MPM = 1 << 16, + NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, + NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, + NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES = 1 << 19, + NL80211_FEATURE_WFA_TPC_IE_IN_PROBES = 1 << 20, + NL80211_FEATURE_QUIET = 1 << 21, + NL80211_FEATURE_TX_POWER_INSERTION = 1 << 22, + NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23, + NL80211_FEATURE_STATIC_SMPS = 1 << 24, + NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25, + NL80211_FEATURE_SUPPORTS_WMM_ADMISSION = 1 << 26, + NL80211_FEATURE_MAC_ON_CREATE = 1 << 27, + NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28, + NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29, + NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30, + NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1U << 31, +}; + +/** + * enum nl80211_ext_feature_index - bit index of extended features. + * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. + * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can + * can request to use RRM (see %NL80211_ATTR_USE_RRM) with + * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set + * the ASSOC_REQ_USE_RRM flag in the association request even if + * NL80211_FEATURE_QUIET is not advertized. + * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air + * sniffer which means that it can be configured to hear packets from + * certain groups which can be configured by the + * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute, + * or can be configured to follow a station by configuring the + * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute. + * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual + * time the scan started in scan results event. The time is the TSF of + * the BSS that the interface that requested the scan is connected to + * (if available). + * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the + * time the last beacon/probe was received. The time is the TSF of the + * BSS that the interface that requested the scan is connected to + * (if available). + * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of + * channel dwell time. + * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate + * configuration (AP/mesh), supporting a legacy (non HT/VHT) rate. + * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate + * configuration (AP/mesh) with HT rates. + * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate + * configuration (AP/mesh) with VHT rates. + * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup + * with user space SME (NL80211_CMD_AUTHENTICATE) in station mode. + * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA + * in @NL80211_CMD_FRAME while not associated. + * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports + * randomized TA in @NL80211_CMD_FRAME while associated. + * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan + * for reporting BSSs with better RSSI than the current connected BSS + * (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI). + * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the + * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more + * RSSI threshold values to monitor rather than exactly one threshold. + * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key + * authentication with %NL80211_CMD_CONNECT. + * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way + * handshake with PSK in station mode (PSK is passed as part of the connect + * and associate commands), doing it in the host might not be supported. + * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way + * handshake with 802.1X in station mode (will pass EAP frames to the host + * and accept the set_pmk/del_pmk commands), doing it in the host might not + * be supported. + * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding + * the max channel attribute in the FILS request params IE with the + * actual dwell time. + * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe + * response + * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending + * the first probe request in each channel at rate of at least 5.5Mbps. + * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports + * probe request tx deferral and suppression + * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL + * value in %NL80211_ATTR_USE_MFP. + * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan. + * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan. + * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan. + * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions. + * Device or driver will do all DFS-related actions by itself, + * informing user-space about CAC progress, radar detection event, + * channel change triggered by radar detection event. + * No need to start CAC from user-space, no need to react to + * "radar detected" event. + * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and + * receiving control port frames over nl80211 instead of the netdevice. + * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports + * (average) ACK signal strength reporting. + * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate + * TXQs. + * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the + * SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN. + * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data + * except for supported rates from the probe request content if requested + * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag. + * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine + * timing measurement responder role. + * + * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are + * able to rekey an in-use key correctly. Userspace must not rekey PTK keys + * if this flag is not set. Ignoring this can leak clear text packets and/or + * freeze the connection. + * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for + * Individually Addressed Frames" from IEEE802.11-2016. + * + * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime + * fairness for transmitted packets and has enabled airtime fairness + * scheduling. + * + * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching + * (set/del PMKSA operations) in AP mode. + * + * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports + * filtering of sched scan results using band specific RSSI thresholds. + * + * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power + * to a station. + * + * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in + * station mode (SAE password is passed as part of the connect command). + * + * @NUM_NL80211_EXT_FEATURES: number of extended features. + * @MAX_NL80211_EXT_FEATURES: highest extended feature index. + */ +enum nl80211_ext_feature_index { + NL80211_EXT_FEATURE_VHT_IBSS, + NL80211_EXT_FEATURE_RRM, + NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER, + NL80211_EXT_FEATURE_SCAN_START_TIME, + NL80211_EXT_FEATURE_BSS_PARENT_TSF, + NL80211_EXT_FEATURE_SET_SCAN_DWELL, + NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, + NL80211_EXT_FEATURE_BEACON_RATE_HT, + NL80211_EXT_FEATURE_BEACON_RATE_VHT, + NL80211_EXT_FEATURE_FILS_STA, + NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA, + NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED, + NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI, + NL80211_EXT_FEATURE_CQM_RSSI_LIST, + NL80211_EXT_FEATURE_FILS_SK_OFFLOAD, + NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK, + NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X, + NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME, + NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP, + NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE, + NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION, + NL80211_EXT_FEATURE_MFP_OPTIONAL, + NL80211_EXT_FEATURE_LOW_SPAN_SCAN, + NL80211_EXT_FEATURE_LOW_POWER_SCAN, + NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN, + NL80211_EXT_FEATURE_DFS_OFFLOAD, + NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211, + NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, + /* we renamed this - stay compatible */ + NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, + NL80211_EXT_FEATURE_TXQS, + NL80211_EXT_FEATURE_SCAN_RANDOM_SN, + NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT, + NL80211_EXT_FEATURE_CAN_REPLACE_PTK0, + NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, + NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, + NL80211_EXT_FEATURE_AP_PMKSA_CACHING, + NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, + NL80211_EXT_FEATURE_EXT_KEY_ID, + NL80211_EXT_FEATURE_STA_TX_PWR, + NL80211_EXT_FEATURE_SAE_OFFLOAD, + + /* add new features before the definition below */ + NUM_NL80211_EXT_FEATURES, + MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1 +}; + +/** + * enum nl80211_probe_resp_offload_support_attr - optional supported + * protocols for probe-response offloading by the driver/FW. + * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. + * Each enum value represents a bit in the bitmap of supported + * protocols. Typically a subset of probe-requests belonging to a + * supported protocol will be excluded from offload and uploaded + * to the host. + * + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1 + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2 + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P + * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u + */ +enum nl80211_probe_resp_offload_support_attr { + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2, + NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3, +}; + +/** + * enum nl80211_connect_failed_reason - connection request failed reasons + * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be + * handled by the AP is reached. + * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL. + */ +enum nl80211_connect_failed_reason { + NL80211_CONN_FAIL_MAX_CLIENTS, + NL80211_CONN_FAIL_BLOCKED_CLIENT, +}; + +/** + * enum nl80211_timeout_reason - timeout reasons + * + * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified. + * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out. + * @NL80211_TIMEOUT_AUTH: Authentication timed out. + * @NL80211_TIMEOUT_ASSOC: Association timed out. + */ +enum nl80211_timeout_reason { + NL80211_TIMEOUT_UNSPECIFIED, + NL80211_TIMEOUT_SCAN, + NL80211_TIMEOUT_AUTH, + NL80211_TIMEOUT_ASSOC, +}; + +/** + * enum nl80211_scan_flags - scan request control flags + * + * Scan request control flags are used to control the handling + * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN + * requests. + * + * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and + * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only + * one of them can be used in the request. + * + * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority + * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning + * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured + * as AP and the beaconing has already been configured. This attribute is + * dangerous because will destroy stations performance as a lot of frames + * will be lost while scanning off-channel, therefore it must be used only + * when really needed + * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or + * for scheduled scan: a different one for every scan iteration). When the + * flag is set, depending on device capabilities the @NL80211_ATTR_MAC and + * @NL80211_ATTR_MAC_MASK attributes may also be given in which case only + * the masked bits will be preserved from the MAC address and the remainder + * randomised. If the attributes are not given full randomisation (46 bits, + * locally administered 1, multicast 0) is assumed. + * This flag must not be requested when the feature isn't supported, check + * the nl80211 feature flags for the device. + * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS + * request parameters IE in the probe request + * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses + * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at + * rate of at least 5.5M. In case non OCE AP is discovered in the channel, + * only the first probe req in the channel will be sent in high rate. + * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request + * tx deferral (dot11FILSProbeDelay shall be set to 15ms) + * and suppression (if it has received a broadcast Probe Response frame, + * Beacon frame or FILS Discovery frame from an AP that the STA considers + * a suitable candidate for (re-)association - suitable in terms of + * SSID and/or RSSI. + * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to + * accomplish the scan. Thus, this flag intends the driver to perform the + * scan request with lesser span/duration. It is specific to the driver + * implementations on how this is accomplished. Scan accuracy may get + * impacted with this flag. + * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume + * optimal possible power. Drivers can resort to their specific means to + * optimize the power. Scan accuracy may get impacted with this flag. + * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan + * results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum + * possible scan results. This flag hints the driver to use the best + * possible scan configuration to improve the accuracy in scanning. + * Latency and power use may get impacted with this flag. + * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe + * request frames from this scan to avoid correlation/tracking being + * possible. + * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to + * only have supported rates and no additional capabilities (unless + * added by userspace explicitly.) + */ +enum nl80211_scan_flags { + NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, + NL80211_SCAN_FLAG_FLUSH = 1<<1, + NL80211_SCAN_FLAG_AP = 1<<2, + NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3, + NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME = 1<<4, + NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5, + NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6, + NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7, + NL80211_SCAN_FLAG_LOW_SPAN = 1<<8, + NL80211_SCAN_FLAG_LOW_POWER = 1<<9, + NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, + NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, + NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, +}; + +/** + * enum nl80211_acl_policy - access control policy + * + * Access control policy is applied on a MAC list set by + * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to + * be used with %NL80211_ATTR_ACL_POLICY. + * + * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are + * listed in ACL, i.e. allow all the stations which are not listed + * in ACL to authenticate. + * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed + * in ACL, i.e. deny all the stations which are not listed in ACL. + */ +enum nl80211_acl_policy { + NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED, + NL80211_ACL_POLICY_DENY_UNLESS_LISTED, +}; + +/** + * enum nl80211_smps_mode - SMPS mode + * + * Requested SMPS mode (for AP mode) + * + * @NL80211_SMPS_OFF: SMPS off (use all antennas). + * @NL80211_SMPS_STATIC: static SMPS (use a single antenna) + * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and + * turn on other antennas after CTS/RTS). + */ +enum nl80211_smps_mode { + NL80211_SMPS_OFF, + NL80211_SMPS_STATIC, + NL80211_SMPS_DYNAMIC, + + __NL80211_SMPS_AFTER_LAST, + NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1 +}; + +/** + * enum nl80211_radar_event - type of radar event for DFS operation + * + * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace + * about detected radars or success of the channel available check (CAC) + * + * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is + * now unusable. + * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished, + * the channel is now available. + * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no + * change to the channel status. + * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is + * over, channel becomes usable. + * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this + * non-operating channel is expired and no longer valid. New CAC must + * be done on this channel before starting the operation. This is not + * applicable for ETSI dfs domain where pre-CAC is valid for ever. + * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started, + * should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled. + */ +enum nl80211_radar_event { + NL80211_RADAR_DETECTED, + NL80211_RADAR_CAC_FINISHED, + NL80211_RADAR_CAC_ABORTED, + NL80211_RADAR_NOP_FINISHED, + NL80211_RADAR_PRE_CAC_EXPIRED, + NL80211_RADAR_CAC_STARTED, +}; + +/** + * enum nl80211_dfs_state - DFS states for channels + * + * Channel states used by the DFS code. + * + * @NL80211_DFS_USABLE: The channel can be used, but channel availability + * check (CAC) must be performed before using it for AP or IBSS. + * @NL80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it + * is therefore marked as not available. + * @NL80211_DFS_AVAILABLE: The channel has been CAC checked and is available. + */ +enum nl80211_dfs_state { + NL80211_DFS_USABLE, + NL80211_DFS_UNAVAILABLE, + NL80211_DFS_AVAILABLE, +}; + +/** + * enum enum nl80211_protocol_features - nl80211 protocol features + * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting + * wiphy dumps (if requested by the application with the attribute + * %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the + * wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or + * %NL80211_ATTR_WDEV. + */ +enum nl80211_protocol_features { + NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP = 1 << 0, +}; + +/** + * enum nl80211_crit_proto_id - nl80211 critical protocol identifiers + * + * @NL80211_CRIT_PROTO_UNSPEC: protocol unspecified. + * @NL80211_CRIT_PROTO_DHCP: BOOTP or DHCPv6 protocol. + * @NL80211_CRIT_PROTO_EAPOL: EAPOL protocol. + * @NL80211_CRIT_PROTO_APIPA: APIPA protocol. + * @NUM_NL80211_CRIT_PROTO: must be kept last. + */ +enum nl80211_crit_proto_id { + NL80211_CRIT_PROTO_UNSPEC, + NL80211_CRIT_PROTO_DHCP, + NL80211_CRIT_PROTO_EAPOL, + NL80211_CRIT_PROTO_APIPA, + /* add other protocols before this one */ + NUM_NL80211_CRIT_PROTO +}; + +/* maximum duration for critical protocol measures */ +#define NL80211_CRIT_PROTO_MAX_DURATION 5000 /* msec */ + +/** + * enum nl80211_rxmgmt_flags - flags for received management frame. + * + * Used by cfg80211_rx_mgmt() + * + * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver. + * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload + * the authentication. Exclusively defined for host drivers that + * advertises the SME functionality but would like the userspace + * to handle certain authentication algorithms (e.g. SAE). + */ +enum nl80211_rxmgmt_flags { + NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0, + NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1, +}; + +/* + * If this flag is unset, the lower 24 bits are an OUI, if set + * a Linux nl80211 vendor ID is used (no such IDs are allocated + * yet, so that's not valid so far) + */ +#define NL80211_VENDOR_ID_IS_LINUX 0x80000000 + +/** + * struct nl80211_vendor_cmd_info - vendor command data + * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the + * value is a 24-bit OUI; if it is set then a separately allocated ID + * may be used, but no such IDs are allocated yet. New IDs should be + * added to this file when needed. + * @subcmd: sub-command ID for the command + */ +struct nl80211_vendor_cmd_info { + __u32 vendor_id; + __u32 subcmd; +}; + +/** + * enum nl80211_tdls_peer_capability - TDLS peer flags. + * + * Used by tdls_mgmt() to determine which conditional elements need + * to be added to TDLS Setup frames. + * + * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. + * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. + * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. + */ +enum nl80211_tdls_peer_capability { + NL80211_TDLS_PEER_HT = 1<<0, + NL80211_TDLS_PEER_VHT = 1<<1, + NL80211_TDLS_PEER_WMM = 1<<2, +}; + +/** + * enum nl80211_sched_scan_plan - scanning plan for scheduled scan + * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved + * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In + * seconds (u32). + * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this + * scan plan (u32). The last scan plan must not specify this attribute + * because it will run infinitely. A value of zero is invalid as it will + * make the scan plan meaningless. + * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number + * currently defined + * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use + */ +enum nl80211_sched_scan_plan { + __NL80211_SCHED_SCAN_PLAN_INVALID, + NL80211_SCHED_SCAN_PLAN_INTERVAL, + NL80211_SCHED_SCAN_PLAN_ITERATIONS, + + /* keep last */ + __NL80211_SCHED_SCAN_PLAN_AFTER_LAST, + NL80211_SCHED_SCAN_PLAN_MAX = + __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1 +}; + +/** + * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters. + * + * @band: band of BSS that must match for RSSI value adjustment. The value + * of this field is according to &enum nl80211_band. + * @delta: value used to adjust the RSSI value of matching BSS in dB. + */ +struct nl80211_bss_select_rssi_adjust { + __u8 band; + __s8 delta; +} __attribute__((packed)); + +/** + * enum nl80211_bss_select_attr - attributes for bss selection. + * + * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved. + * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection + * is requested. + * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS + * selection should be done such that the specified band is preferred. + * When there are multiple BSS-es in the preferred band, the driver + * shall use RSSI-based BSS selection as a second step. The value of + * this attribute is according to &enum nl80211_band (u32). + * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for + * BSS-es in the specified band is to be adjusted before doing + * RSSI-based BSS selection. The attribute value is a packed structure + * value as specified by &struct nl80211_bss_select_rssi_adjust. + * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number. + * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use. + * + * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT + * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour + * which the driver shall use. + */ +enum nl80211_bss_select_attr { + __NL80211_BSS_SELECT_ATTR_INVALID, + NL80211_BSS_SELECT_ATTR_RSSI, + NL80211_BSS_SELECT_ATTR_BAND_PREF, + NL80211_BSS_SELECT_ATTR_RSSI_ADJUST, + + /* keep last */ + __NL80211_BSS_SELECT_ATTR_AFTER_LAST, + NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_nan_function_type - NAN function type + * + * Defines the function type of a NAN function + * + * @NL80211_NAN_FUNC_PUBLISH: function is publish + * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe + * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up + */ +enum nl80211_nan_function_type { + NL80211_NAN_FUNC_PUBLISH, + NL80211_NAN_FUNC_SUBSCRIBE, + NL80211_NAN_FUNC_FOLLOW_UP, + + /* keep last */ + __NL80211_NAN_FUNC_TYPE_AFTER_LAST, + NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1, +}; + +/** + * enum nl80211_nan_publish_type - NAN publish tx type + * + * Defines how to send publish Service Discovery Frames + * + * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited + * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited + */ +enum nl80211_nan_publish_type { + NL80211_NAN_SOLICITED_PUBLISH = 1 << 0, + NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1, +}; + +/** + * enum nl80211_nan_func_term_reason - NAN functions termination reason + * + * Defines termination reasons of a NAN function + * + * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user + * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout + * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored + */ +enum nl80211_nan_func_term_reason { + NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST, + NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED, + NL80211_NAN_FUNC_TERM_REASON_ERROR, +}; + +#define NL80211_NAN_FUNC_SERVICE_ID_LEN 6 +#define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff +#define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff + +/** + * enum nl80211_nan_func_attributes - NAN function attributes + * @__NL80211_NAN_FUNC_INVALID: invalid + * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8). + * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as + * specified in NAN spec. This is a binary attribute. + * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is + * publish. Defines the transmission type for the publish Service Discovery + * Frame, see &enum nl80211_nan_publish_type. Its type is u8. + * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited + * publish. Should the solicited publish Service Discovery Frame be sent to + * the NAN Broadcast address. This is a flag. + * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is + * subscribe. Is the subscribe active. This is a flag. + * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up. + * The instance ID for the follow up Service Discovery Frame. This is u8. + * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type + * is follow up. This is a u8. + * The requestor instance ID for the follow up Service Discovery Frame. + * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the + * follow up Service Discovery Frame. This is a binary attribute. + * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a + * close range. The range itself (RSSI) is defined by the device. + * This is a flag. + * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should + * stay active. If not present infinite TTL is assumed. This is a u32. + * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service + * specific info. This is a binary attribute. + * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute. + * See &enum nl80211_nan_srf_attributes. + * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested + * attribute. It is a list of binary values. + * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a + * nested attribute. It is a list of binary values. + * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function. + * Its type is u8 and it cannot be 0. + * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason. + * See &enum nl80211_nan_func_term_reason. + * + * @NUM_NL80211_NAN_FUNC_ATTR: internal + * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute + */ +enum nl80211_nan_func_attributes { + __NL80211_NAN_FUNC_INVALID, + NL80211_NAN_FUNC_TYPE, + NL80211_NAN_FUNC_SERVICE_ID, + NL80211_NAN_FUNC_PUBLISH_TYPE, + NL80211_NAN_FUNC_PUBLISH_BCAST, + NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE, + NL80211_NAN_FUNC_FOLLOW_UP_ID, + NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID, + NL80211_NAN_FUNC_FOLLOW_UP_DEST, + NL80211_NAN_FUNC_CLOSE_RANGE, + NL80211_NAN_FUNC_TTL, + NL80211_NAN_FUNC_SERVICE_INFO, + NL80211_NAN_FUNC_SRF, + NL80211_NAN_FUNC_RX_MATCH_FILTER, + NL80211_NAN_FUNC_TX_MATCH_FILTER, + NL80211_NAN_FUNC_INSTANCE_ID, + NL80211_NAN_FUNC_TERM_REASON, + + /* keep last */ + NUM_NL80211_NAN_FUNC_ATTR, + NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1 +}; + +/** + * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes + * @__NL80211_NAN_SRF_INVALID: invalid + * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set. + * This is a flag. + * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if + * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. + * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if + * %NL80211_NAN_SRF_BF is present. This is a u8. + * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if + * and only if %NL80211_NAN_SRF_BF isn't present. This is a nested + * attribute. Each nested attribute is a MAC address. + * @NUM_NL80211_NAN_SRF_ATTR: internal + * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute + */ +enum nl80211_nan_srf_attributes { + __NL80211_NAN_SRF_INVALID, + NL80211_NAN_SRF_INCLUDE, + NL80211_NAN_SRF_BF, + NL80211_NAN_SRF_BF_IDX, + NL80211_NAN_SRF_MAC_ADDRS, + + /* keep last */ + NUM_NL80211_NAN_SRF_ATTR, + NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1, +}; + +/** + * enum nl80211_nan_match_attributes - NAN match attributes + * @__NL80211_NAN_MATCH_INVALID: invalid + * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the + * match. This is a nested attribute. + * See &enum nl80211_nan_func_attributes. + * @NL80211_NAN_MATCH_FUNC_PEER: the peer function + * that caused the match. This is a nested attribute. + * See &enum nl80211_nan_func_attributes. + * + * @NUM_NL80211_NAN_MATCH_ATTR: internal + * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute + */ +enum nl80211_nan_match_attributes { + __NL80211_NAN_MATCH_INVALID, + NL80211_NAN_MATCH_FUNC_LOCAL, + NL80211_NAN_MATCH_FUNC_PEER, + + /* keep last */ + NUM_NL80211_NAN_MATCH_ATTR, + NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1 +}; + +/** + * nl80211_external_auth_action - Action to perform with external + * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. + * @NL80211_EXTERNAL_AUTH_START: Start the authentication. + * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication. + */ +enum nl80211_external_auth_action { + NL80211_EXTERNAL_AUTH_START, + NL80211_EXTERNAL_AUTH_ABORT, +}; + +/** + * enum nl80211_ftm_responder_attributes - fine timing measurement + * responder attributes + * @__NL80211_FTM_RESP_ATTR_INVALID: Invalid + * @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled + * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element + * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10), + * i.e. starting with the measurement token + * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element + * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13), + * i.e. starting with the measurement token + * @__NL80211_FTM_RESP_ATTR_LAST: Internal + * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute. + */ +enum nl80211_ftm_responder_attributes { + __NL80211_FTM_RESP_ATTR_INVALID, + + NL80211_FTM_RESP_ATTR_ENABLED, + NL80211_FTM_RESP_ATTR_LCI, + NL80211_FTM_RESP_ATTR_CIVICLOC, + + /* keep last */ + __NL80211_FTM_RESP_ATTR_LAST, + NL80211_FTM_RESP_ATTR_MAX = __NL80211_FTM_RESP_ATTR_LAST - 1, +}; + +/* + * enum nl80211_ftm_responder_stats - FTM responder statistics + * + * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS + * when getting FTM responder statistics. + * + * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved + * @NL80211_FTM_STATS_SUCCESS_NUM: number of FTM sessions in which all frames + * were ssfully answered (u32) + * @NL80211_FTM_STATS_PARTIAL_NUM: number of FTM sessions in which part of the + * frames were successfully answered (u32) + * @NL80211_FTM_STATS_FAILED_NUM: number of failed FTM sessions (u32) + * @NL80211_FTM_STATS_ASAP_NUM: number of ASAP sessions (u32) + * @NL80211_FTM_STATS_NON_ASAP_NUM: number of non-ASAP sessions (u32) + * @NL80211_FTM_STATS_TOTAL_DURATION_MSEC: total sessions durations - gives an + * indication of how much time the responder was busy (u64, msec) + * @NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM: number of unknown FTM triggers - + * triggers from initiators that didn't finish successfully the negotiation + * phase with the responder (u32) + * @NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM: number of FTM reschedule requests + * - initiator asks for a new scheduling although it already has scheduled + * FTM slot (u32) + * @NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM: number of FTM triggers out of + * scheduled window (u32) + * @NL80211_FTM_STATS_PAD: used for padding, ignore + * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal + * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute + */ +enum nl80211_ftm_responder_stats { + __NL80211_FTM_STATS_INVALID, + NL80211_FTM_STATS_SUCCESS_NUM, + NL80211_FTM_STATS_PARTIAL_NUM, + NL80211_FTM_STATS_FAILED_NUM, + NL80211_FTM_STATS_ASAP_NUM, + NL80211_FTM_STATS_NON_ASAP_NUM, + NL80211_FTM_STATS_TOTAL_DURATION_MSEC, + NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM, + NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM, + NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM, + NL80211_FTM_STATS_PAD, + + /* keep last */ + __NL80211_FTM_STATS_AFTER_LAST, + NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 1 +}; + +/** + * enum nl80211_preamble - frame preamble types + * @NL80211_PREAMBLE_LEGACY: legacy (HR/DSSS, OFDM, ERP PHY) preamble + * @NL80211_PREAMBLE_HT: HT preamble + * @NL80211_PREAMBLE_VHT: VHT preamble + * @NL80211_PREAMBLE_DMG: DMG preamble + */ +enum nl80211_preamble { + NL80211_PREAMBLE_LEGACY, + NL80211_PREAMBLE_HT, + NL80211_PREAMBLE_VHT, + NL80211_PREAMBLE_DMG, +}; + +/** + * enum nl80211_peer_measurement_type - peer measurement types + * @NL80211_PMSR_TYPE_INVALID: invalid/unused, needed as we use + * these numbers also for attributes + * + * @NL80211_PMSR_TYPE_FTM: flight time measurement + * + * @NUM_NL80211_PMSR_TYPES: internal + * @NL80211_PMSR_TYPE_MAX: highest type number + */ +enum nl80211_peer_measurement_type { + NL80211_PMSR_TYPE_INVALID, + + NL80211_PMSR_TYPE_FTM, + + NUM_NL80211_PMSR_TYPES, + NL80211_PMSR_TYPE_MAX = NUM_NL80211_PMSR_TYPES - 1 +}; + +/** + * enum nl80211_peer_measurement_status - peer measurement status + * @NL80211_PMSR_STATUS_SUCCESS: measurement completed successfully + * @NL80211_PMSR_STATUS_REFUSED: measurement was locally refused + * @NL80211_PMSR_STATUS_TIMEOUT: measurement timed out + * @NL80211_PMSR_STATUS_FAILURE: measurement failed, a type-dependent + * reason may be available in the response data + */ +enum nl80211_peer_measurement_status { + NL80211_PMSR_STATUS_SUCCESS, + NL80211_PMSR_STATUS_REFUSED, + NL80211_PMSR_STATUS_TIMEOUT, + NL80211_PMSR_STATUS_FAILURE, +}; + +/** + * enum nl80211_peer_measurement_req - peer measurement request attributes + * @__NL80211_PMSR_REQ_ATTR_INVALID: invalid + * + * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement + * type-specific request data inside. The attributes used are from the + * enums named nl80211_peer_measurement_<type>_req. + * @NL80211_PMSR_REQ_ATTR_GET_AP_TSF: include AP TSF timestamp, if supported + * (flag attribute) + * + * @NUM_NL80211_PMSR_REQ_ATTRS: internal + * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_req { + __NL80211_PMSR_REQ_ATTR_INVALID, + + NL80211_PMSR_REQ_ATTR_DATA, + NL80211_PMSR_REQ_ATTR_GET_AP_TSF, + + /* keep last */ + NUM_NL80211_PMSR_REQ_ATTRS, + NL80211_PMSR_REQ_ATTR_MAX = NUM_NL80211_PMSR_REQ_ATTRS - 1 +}; + +/** + * enum nl80211_peer_measurement_resp - peer measurement response attributes + * @__NL80211_PMSR_RESP_ATTR_INVALID: invalid + * + * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement + * type-specific results inside. The attributes used are from the enums + * named nl80211_peer_measurement_<type>_resp. + * @NL80211_PMSR_RESP_ATTR_STATUS: u32 value with the measurement status + * (using values from &enum nl80211_peer_measurement_status.) + * @NL80211_PMSR_RESP_ATTR_HOST_TIME: host time (%CLOCK_BOOTTIME) when the + * result was measured; this value is not expected to be accurate to + * more than 20ms. (u64, nanoseconds) + * @NL80211_PMSR_RESP_ATTR_AP_TSF: TSF of the AP that the interface + * doing the measurement is connected to when the result was measured. + * This shall be accurately reported if supported and requested + * (u64, usec) + * @NL80211_PMSR_RESP_ATTR_FINAL: If results are sent to the host partially + * (*e.g. with FTM per-burst data) this flag will be cleared on all but + * the last result; if all results are combined it's set on the single + * result. + * @NL80211_PMSR_RESP_ATTR_PAD: padding for 64-bit attributes, ignore + * + * @NUM_NL80211_PMSR_RESP_ATTRS: internal + * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_resp { + __NL80211_PMSR_RESP_ATTR_INVALID, + + NL80211_PMSR_RESP_ATTR_DATA, + NL80211_PMSR_RESP_ATTR_STATUS, + NL80211_PMSR_RESP_ATTR_HOST_TIME, + NL80211_PMSR_RESP_ATTR_AP_TSF, + NL80211_PMSR_RESP_ATTR_FINAL, + NL80211_PMSR_RESP_ATTR_PAD, + + /* keep last */ + NUM_NL80211_PMSR_RESP_ATTRS, + NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 1 +}; + +/** + * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement + * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid + * + * @NL80211_PMSR_PEER_ATTR_ADDR: peer's MAC address + * @NL80211_PMSR_PEER_ATTR_CHAN: channel definition, nested, using top-level + * attributes like %NL80211_ATTR_WIPHY_FREQ etc. + * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by + * measurement type, with attributes from the + * &enum nl80211_peer_measurement_req inside. + * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by + * measurement type, with attributes from the + * &enum nl80211_peer_measurement_resp inside. + * + * @NUM_NL80211_PMSR_PEER_ATTRS: internal + * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_peer_attrs { + __NL80211_PMSR_PEER_ATTR_INVALID, + + NL80211_PMSR_PEER_ATTR_ADDR, + NL80211_PMSR_PEER_ATTR_CHAN, + NL80211_PMSR_PEER_ATTR_REQ, + NL80211_PMSR_PEER_ATTR_RESP, + + /* keep last */ + NUM_NL80211_PMSR_PEER_ATTRS, + NL80211_PMSR_PEER_ATTR_MAX = NUM_NL80211_PMSR_PEER_ATTRS - 1, +}; + +/** + * enum nl80211_peer_measurement_attrs - peer measurement attributes + * @__NL80211_PMSR_ATTR_INVALID: invalid + * + * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability + * advertisement only, indicates the maximum number of peers + * measurements can be done with in a single request + * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability + * indicating that the connected AP's TSF can be reported in + * measurement results + * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability + * indicating that MAC address randomization is supported. + * @NL80211_PMSR_ATTR_TYPE_CAPA: capabilities reported by the device, + * this contains a nesting indexed by measurement type, and + * type-specific capabilities inside, which are from the enums + * named nl80211_peer_measurement_<type>_capa. + * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is + * meaningless, just a list of peers to measure with, with the + * sub-attributes taken from + * &enum nl80211_peer_measurement_peer_attrs. + * + * @NUM_NL80211_PMSR_ATTR: internal + * @NL80211_PMSR_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_attrs { + __NL80211_PMSR_ATTR_INVALID, + + NL80211_PMSR_ATTR_MAX_PEERS, + NL80211_PMSR_ATTR_REPORT_AP_TSF, + NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR, + NL80211_PMSR_ATTR_TYPE_CAPA, + NL80211_PMSR_ATTR_PEERS, + + /* keep last */ + NUM_NL80211_PMSR_ATTR, + NL80211_PMSR_ATTR_MAX = NUM_NL80211_PMSR_ATTR - 1 +}; + +/** + * enum nl80211_peer_measurement_ftm_capa - FTM capabilities + * @__NL80211_PMSR_FTM_CAPA_ATTR_INVALID: invalid + * + * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode + * is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP + * mode is supported + * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI + * data can be requested during the measurement + * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic + * location data can be requested during the measurement + * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits + * from &enum nl80211_preamble. + * @NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS: bitmap of values from + * &enum nl80211_chan_width indicating the supported channel + * bandwidths for FTM. Note that a higher channel bandwidth may be + * configured to allow for other measurements types with different + * bandwidth requirement in the same measurement. + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating + * the maximum bursts exponent that can be used (if not present anything + * is valid) + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating + * the maximum FTMs per burst (if not present anything is valid) + * + * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_ftm_capa { + __NL80211_PMSR_FTM_CAPA_ATTR_INVALID, + + NL80211_PMSR_FTM_CAPA_ATTR_ASAP, + NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP, + NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI, + NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC, + NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES, + NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT, + NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, + + /* keep last */ + NUM_NL80211_PMSR_FTM_CAPA_ATTR, + NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 1 +}; + +/** + * enum nl80211_peer_measurement_ftm_req - FTM request attributes + * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid + * + * @NL80211_PMSR_FTM_REQ_ATTR_ASAP: ASAP mode requested (flag) + * @NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE: preamble type (see + * &enum nl80211_preamble), optional for DMG (u32) + * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in + * 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element" + * (u8, 0-15, optional with default 15 i.e. "no preference") + * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units + * of 100ms (u16, optional with default 0) + * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016 + * Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with + * default 15 i.e. "no preference") + * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames + * requested per burst + * (u8, 0-31, optional with default 0 i.e. "no preference") + * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries + * (u8, default 3) + * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) + * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data + * (flag) + * + * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal + * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_ftm_req { + __NL80211_PMSR_FTM_REQ_ATTR_INVALID, + + NL80211_PMSR_FTM_REQ_ATTR_ASAP, + NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE, + NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP, + NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD, + NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION, + NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST, + NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES, + NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI, + NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, + + /* keep last */ + NUM_NL80211_PMSR_FTM_REQ_ATTR, + NL80211_PMSR_FTM_REQ_ATTR_MAX = NUM_NL80211_PMSR_FTM_REQ_ATTR - 1 +}; + +/** + * enum nl80211_peer_measurement_ftm_failure_reasons - FTM failure reasons + * @NL80211_PMSR_FTM_FAILURE_UNSPECIFIED: unspecified failure, not used + * @NL80211_PMSR_FTM_FAILURE_NO_RESPONSE: no response from the FTM responder + * @NL80211_PMSR_FTM_FAILURE_REJECTED: FTM responder rejected measurement + * @NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL: we already know the peer is + * on a different channel, so can't measure (if we didn't know, we'd + * try and get no response) + * @NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE: peer can't actually do FTM + * @NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP: invalid T1/T4 timestamps + * received + * @NL80211_PMSR_FTM_FAILURE_PEER_BUSY: peer reports busy, you may retry + * later (see %NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME) + * @NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS: parameters were changed + * by the peer and are no longer supported + */ +enum nl80211_peer_measurement_ftm_failure_reasons { + NL80211_PMSR_FTM_FAILURE_UNSPECIFIED, + NL80211_PMSR_FTM_FAILURE_NO_RESPONSE, + NL80211_PMSR_FTM_FAILURE_REJECTED, + NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL, + NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE, + NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP, + NL80211_PMSR_FTM_FAILURE_PEER_BUSY, + NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS, +}; + +/** + * enum nl80211_peer_measurement_ftm_resp - FTM response attributes + * @__NL80211_PMSR_FTM_RESP_ATTR_INVALID: invalid + * + * @NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON: FTM-specific failure reason + * (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX: optional, if bursts are reported + * as separate results then it will be the burst index 0...(N-1) and + * the top level will indicate partial results (u32) + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames + * transmitted (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames + * that were acknowleged (u32, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the + * busy peer (u32, seconds) + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent + * used by the responder (similar to request, u8) + * @NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION: actual burst duration used by + * the responder (similar to request, u8) + * @NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST: actual FTMs per burst used + * by the responder (similar to request, u8) + * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG: average RSSI across all FTM action + * frames (optional, s32, 1/2 dBm) + * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD: RSSI spread across all FTM action + * frames (optional, s32, 1/2 dBm) + * @NL80211_PMSR_FTM_RESP_ATTR_TX_RATE: bitrate we used for the response to the + * FTM action frame (optional, nested, using &enum nl80211_rate_info + * attributes) + * @NL80211_PMSR_FTM_RESP_ATTR_RX_RATE: bitrate the responder used for the FTM + * action frame (optional, nested, using &enum nl80211_rate_info attrs) + * @NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG: average RTT (s64, picoseconds, optional + * but one of RTT/DIST must be present) + * @NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE: RTT variance (u64, ps^2, note that + * standard deviation is the square root of variance, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD: RTT spread (u64, picoseconds, + * optional) + * @NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG: average distance (s64, mm, optional + * but one of RTT/DIST must be present) + * @NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE: distance variance (u64, mm^2, note + * that standard deviation is the square root of variance, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD: distance spread (u64, mm, optional) + * @NL80211_PMSR_FTM_RESP_ATTR_LCI: LCI data from peer (binary, optional); + * this is the contents of the Measurement Report Element (802.11-2016 + * 9.4.2.22.1) starting with the Measurement Token, with Measurement + * Type 8. + * @NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC: civic location data from peer + * (binary, optional); + * this is the contents of the Measurement Report Element (802.11-2016 + * 9.4.2.22.1) starting with the Measurement Token, with Measurement + * Type 11. + * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only + * + * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal + * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number + */ +enum nl80211_peer_measurement_ftm_resp { + __NL80211_PMSR_FTM_RESP_ATTR_INVALID, + + NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON, + NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX, + NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS, + NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES, + NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME, + NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP, + NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION, + NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST, + NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG, + NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD, + NL80211_PMSR_FTM_RESP_ATTR_TX_RATE, + NL80211_PMSR_FTM_RESP_ATTR_RX_RATE, + NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG, + NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE, + NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD, + NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG, + NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE, + NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD, + NL80211_PMSR_FTM_RESP_ATTR_LCI, + NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC, + NL80211_PMSR_FTM_RESP_ATTR_PAD, + + /* keep last */ + NUM_NL80211_PMSR_FTM_RESP_ATTR, + NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1 +}; + +/** + * enum nl80211_obss_pd_attributes - OBSS packet detection attributes + * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid + * + * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset. + * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset. + * + * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal + * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute. + */ +enum nl80211_obss_pd_attributes { + __NL80211_HE_OBSS_PD_ATTR_INVALID, + + NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET, + NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET, + + /* keep last */ + __NL80211_HE_OBSS_PD_ATTR_LAST, + NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1, +}; + + +#endif /* __LINUX_NL80211_H */ diff --git a/po/POTFILES.in b/po/POTFILES.in index d960589d..92fba36b 100644 --- a/po/POTFILES.in +++ b/po/POTFILES.in @@ -51,6 +51,7 @@ multiload/org.mate.panel.applet.multiload.gschema.xml.in multiload/properties.c netspeed/data/org.mate.panel.applet.netspeed.gschema.xml.in netspeed/data/org.mate.applets.NetspeedApplet.mate-panel-applet.desktop.in.in +netspeed/src/backend.c netspeed/src/netspeed.c netspeed/src/netspeed-preferences.ui # NB. these are actually separate files |