renaming from gcalctool to mate-conf

1 files changed, 40 insertions, 40 deletions

diff --git a/po/nb.po b/po/nb.po
index 2d47b24..d933d6f 100644
--- a/po/nb.po
+++ b/po/nb.po
@@ -1,4 +1,4 @@
-# Norwegian (bokmål) translation of gcalctool.
+# Norwegian (bokmål) translation of mate-calc.
 # Copyright © 2003 Free Software Foundation, Inc.
 # Kjartan Maraas <[email protected]>, 2003-2010.
 # Sigurd Gartman <[email protected]>, 2003, 2005.
@@ -6,7 +6,7 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: gcalctool 5.29.x\n"
+"Project-Id-Version: mate-calc 5.29.x\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2010-06-19 16:31+0200\n"
 "PO-Revision-Date: 2010-06-19 16:40+0200\n"
@@ -449,127 +449,127 @@ msgid "_Angle units:"
 msgstr "_Enhet for vinkel:"
 
 #. Title of main window
-#: ../data/gcalctool.desktop.in.h:1 ../src/math-window.c:521
+#: ../data/mate-calc.desktop.in.h:1 ../src/math-window.c:521
 msgid "Calculator"
 msgstr "Kalkulator"
 
-#: ../data/gcalctool.desktop.in.h:2
+#: ../data/mate-calc.desktop.in.h:2
 msgid "Perform arithmetic, scientific or financial calculations"
 msgstr "Utfør aritmetiske, vitenskapelige eller finansielle utregninger"
 
-#: ../data/gcalctool.schemas.in.h:1
+#: ../data/mate-calc.schemas.in.h:1
 msgid "Accuracy value"
 msgstr "Verdi for nøyaktighet"
 
-#: ../data/gcalctool.schemas.in.h:2
+#: ../data/mate-calc.schemas.in.h:2
 msgid "Currency of the current calculation"
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:3
+#: ../data/mate-calc.schemas.in.h:3
 msgid "Currency to convert the current calculation into"
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:4
+#: ../data/mate-calc.schemas.in.h:4
 msgid "Display Mode"
 msgstr "Visningsmodus"
 
-#: ../data/gcalctool.schemas.in.h:5
+#: ../data/mate-calc.schemas.in.h:5
 msgid ""
 "Indicates whether any trailing zeroes after the numeric point should be "
 "shown in the display value."
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:6
+#: ../data/mate-calc.schemas.in.h:6
 msgid "Indicates whether the memory register window is initially displayed."
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:7
+#: ../data/mate-calc.schemas.in.h:7
 msgid "Indicates whether thousands separators are shown in large numbers."
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:8
+#: ../data/mate-calc.schemas.in.h:8
 msgid "Mode"
 msgstr "Modus"
 
-#: ../data/gcalctool.schemas.in.h:9
+#: ../data/mate-calc.schemas.in.h:9
 msgid "Numeric Base"
 msgstr "Tallbase"
 
-#: ../data/gcalctool.schemas.in.h:10
+#: ../data/mate-calc.schemas.in.h:10
 msgid "Show Registers"
 msgstr "Vis registre"
 
-#: ../data/gcalctool.schemas.in.h:11
+#: ../data/mate-calc.schemas.in.h:11
 msgid "Show Thousands Separators"
 msgstr "Vis tusenskilletegn"
 
-#: ../data/gcalctool.schemas.in.h:12
+#: ../data/mate-calc.schemas.in.h:12
 msgid "Show Trailing Zeroes"
 msgstr "Vis etterfølgende nuller"
 
-#: ../data/gcalctool.schemas.in.h:13
+#: ../data/mate-calc.schemas.in.h:13
 msgid "Source currency"
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:14
+#: ../data/mate-calc.schemas.in.h:14
 msgid "Target currency"
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:15
+#: ../data/mate-calc.schemas.in.h:15
 msgid ""
 "The display format used in advanced mode. One of: \"ENG\" (engineering), "
 "\"FIX\" (fixed-point) and \"SCI\" (scientific)"
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:16
+#: ../data/mate-calc.schemas.in.h:16
 msgid ""
 "The initial calculator mode. Valid values are \"BASIC\", \"FINANCIAL\", "
 "\"LOGICAL\", \"SCIENTIFIC\" and \"PROGRAMMING\""
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:17
+#: ../data/mate-calc.schemas.in.h:17
 msgid ""
 "The initial trigonometric type. Valid values are \"DEG\" (degrees), \"GRAD"
 "\" (gradians) and \"RAD\" (radians)."
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:18
+#: ../data/mate-calc.schemas.in.h:18
 msgid "The initial x-coordinate for the window"
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:19
+#: ../data/mate-calc.schemas.in.h:19
 msgid "The initial y-coordinate for the window"
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:20
+#: ../data/mate-calc.schemas.in.h:20
 msgid ""
 "The number of digits displayed after the numeric point. This value must be "
 "in the range 0 to 9."
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:21
+#: ../data/mate-calc.schemas.in.h:21
 msgid "The number of pixels to place the window from the left of the screen."
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:22
+#: ../data/mate-calc.schemas.in.h:22
 msgid "The number of pixels to place the window from the top of the screen."
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:23
+#: ../data/mate-calc.schemas.in.h:23
 msgid "The numeric base (used in programming mode)"
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:24
+#: ../data/mate-calc.schemas.in.h:24
 msgid ""
 "The size of the words used in bitwise operations. Valid values are 16, 32 "
 "and 64."
 msgstr ""
 
-#: ../data/gcalctool.schemas.in.h:25
+#: ../data/mate-calc.schemas.in.h:25
 msgid "Trigonometric type"
 msgstr "Trignonometrisk type"
 
-#: ../data/gcalctool.schemas.in.h:26
+#: ../data/mate-calc.schemas.in.h:26
 msgid "Word size"
 msgstr "Størrelse på ord"
 
@@ -713,8 +713,8 @@ msgstr "US dollar"
 msgid "South African rand"
 msgstr "Sør-afrikanske rand"
 
-#. Description on how to use gcalctool displayed on command-line
-#: ../src/gcalctool.c:77
+#. Description on how to use mate-calc displayed on command-line
+#: ../src/mate-calc.c:77
 #, c-format
 msgid ""
 "Usage:\n"
@@ -723,8 +723,8 @@ msgstr ""
 "Bruk:\n"
 "  %s - Utfør matematiske beregninger"
 
-#. Description on gcalctool command-line help options displayed on command-line
-#: ../src/gcalctool.c:85
+#. Description on mate-calc command-line help options displayed on command-line
+#: ../src/mate-calc.c:85
 #, c-format
 msgid ""
 "Help Options:\n"
@@ -739,8 +739,8 @@ msgstr ""
 "  --help-all                      Vis alle alternativer for hjelp\n"
 "  --help-gtk                      Vis alternativer for GTK+"
 
-#. Description on gcalctool command-line GTK+ options displayed on command-line
-#: ../src/gcalctool.c:96
+#. Description on mate-calc command-line GTK+ options displayed on command-line
+#: ../src/mate-calc.c:96
 #, c-format
 msgid ""
 "GTK+ Options:\n"
@@ -754,8 +754,8 @@ msgid ""
 "  --g-fatal-warnings              Make all warnings fatal"
 msgstr ""
 
-#. Description on gcalctool application options displayed on command-line
-#: ../src/gcalctool.c:110
+#. Description on mate-calc application options displayed on command-line
+#: ../src/mate-calc.c:110
 #, c-format
 msgid ""
 "Application Options:\n"
@@ -764,13 +764,13 @@ msgid ""
 msgstr ""
 
 #. Error printed to stderr when user uses --solve argument without an equation
-#: ../src/gcalctool.c:155
+#: ../src/mate-calc.c:155
 #, c-format
 msgid "Argument --solve requires an equation to solve"
 msgstr ""
 
 #. Error printed to stderr when user provides an unknown command-line argument
-#: ../src/gcalctool.c:169
+#: ../src/mate-calc.c:169
 #, c-format
 msgid "Unknown argument '%s'"
 msgstr "Ukjent argument «%s»"