diff options
Diffstat (limited to 'po/hi.po')
| -rw-r--r-- | po/hi.po | 2317 |
1 files changed, 2317 insertions, 0 deletions
diff --git a/po/hi.po b/po/hi.po new file mode 100644 index 0000000..24c0bbf --- /dev/null +++ b/po/hi.po @@ -0,0 +1,2317 @@ +# translation of gcalctool.master.po to Hindi +# This file is distributed under the same license as the PACKAGE package. +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER. +# +# G Karunakar <[email protected]>, 2003. +# Ravishankar Shrivastava <[email protected]>, 2004. +# Rajesh Ranjan <[email protected]>, 2005, 2006, 2008, 2009. +# Rajesh Ranjan <[email protected]>, 2009. +msgid "" +msgstr "" +"Project-Id-Version: gcalctool.master\n" +"Report-Msgid-Bugs-To: http://bugzilla.mate.org/enter_bug.cgi?product=gcalctool&component=general\n" +"POT-Creation-Date: 2009-08-16 06:22+0000\n" +"PO-Revision-Date: 2009-09-17 16:46+0530\n" +"Last-Translator: Rajesh Ranjan <[email protected]>\n" +"Language-Team: Hindi <hindi.sf.net>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 1.11.4\n" +"Plural-Forms: nplurals=2; plural=(n!=1);\n\n" +"\n" +"\n" +"\n" +"\n" +"\n" +"\n" +"\n" +"\n" + +#. Payment Period Dialog: Button to calculate result +#: ../data/financial.ui.h:2 +msgid "C_alculate" +msgstr "गणना करें (_a)" + +#. Gross Profit Margin Dialog: Label before cost input +#: ../data/financial.ui.h:4 +msgid "C_ost:" +msgstr "लागत (_o):" + +#. Periodic Payment Dialog: Description of calculation +#: ../data/financial.ui.h:6 +msgid "" +"Calculates the amount of the periodic payment of a loan, where payments are " +"made at the end of each payment period. " +msgstr "ऋण के आवधिक भुगतान के लिए राशि की गणना करता है, जहाँ भुगतान हर भुगतान अवधि के अंत में किया जाता है." + +#. Sum-Of-The-Years'-Digits Depreciation Dialog: Description of calculation +#: ../data/financial.ui.h:8 +msgid "" +"Calculates the depreciation allowance on an asset for a specified period of " +"time, using the Sum-Of-The-Years'-Digits method. This method of depreciation " +"accelerates the rate of depreciation, so that more depreciation expense " +"occurs in earlier periods than in later ones. The useful life is the number " +"of periods, typically years, over which an asset is depreciated. " +msgstr "समय की निर्दिष्ट अवधि के लिए मूल्यह्रास भत्ता की गणना करता है, Sum-Of-The-Years'-Digits विधि के प्रयोग से. मूल्यह्रास की विधि मूल्यह्रास की दर को त्वरित करता है ताकि अधिक मूल्यह्रास व्यय बाद के बजाय पहली अवधि में हो. उपयोगी जीवन अवधि की संख्या है प्रारूपकीय तौर पर वर्ष जिसपर कोई परिसंपत्ति मूल्यह्रास होती है." + +#. Double-Declining Depreciation Dialog: Description of calculation +#: ../data/financial.ui.h:10 +msgid "" +"Calculates the depreciation allowance on an asset for a specified period of " +"time, using the double-declining balance method." +msgstr "समय की निर्दिष्ट अवधि के लिए मूल्यह्रास भत्ता की गणना करता है, दोहरे कमी विधि के प्रयोग से." + +#. Future Value Dialog: Description of calculation +#: ../data/financial.ui.h:12 +msgid "" +"Calculates the future value of an investment based on a series of equal " +"payments at a periodic interest rate over the number of payment periods in " +"the term." +msgstr "किसी निवेश के भविष्य के मान की गणना आवधिक ब्याज दर से बराबर भुगतान पर करता है उस अवधि में भुगतान अवधि की संख्या के आधार पर." + +#. Compounding Term Dialog: Description of calculation +#: ../data/financial.ui.h:14 +msgid "" +"Calculates the number of compounding periods necessary to increase an " +"investment of present value to a future value, at a fixed interest rate per " +"compounding period." +msgstr "समझौता अवधि की संख्या की गणना करता है जो कि किसी निवेश को वर्तमान मान से भविष्य के मान में बढ़ाने के लिए जरूरी है, एक स्थिर ब्याज दर प्रति समझौता अवधि के लिए." + +#. Payment Period Dialog: Description of calculation +#: ../data/financial.ui.h:16 +msgid "" +"Calculates the number of payment periods that are necessary during the term " +"of an ordinary annuity, to accumulate a future value, at a periodic interest " +"rate." +msgstr "भुगतान अवधि की संख्या की गणना करता है जो कि किसी सामान्य वार्षिकी के दौरान जरूरी होता है, किसी भविष्य के मान को समाहित करने के लिए, किसी आवधिक ब्याज दर पर." + +#. Periodic Interest Rate Dialog: Description of calculation +#: ../data/financial.ui.h:18 +msgid "" +"Calculates the periodic interest necessary to increase an investment to a " +"future value, over the number of compounding periods. " +msgstr "आवधिक ब्याज की गणना करता है जो किसी निवेश को भविष्य के मूल्य तक बढ़ाने के लिए जरूरी है, समझौता अवधि की संख्या के आधार पर. " + +#. Present Value Dialog: Description of calculation +#: ../data/financial.ui.h:20 +msgid "" +"Calculates the present value of an investment based on a series of equal " +"payments discounted at a periodic interest rate over the number of payment " +"periods in the term. " +msgstr "समान भुगतान की शृंखला पर आधारित किसी निवेश के मौजूदा मान की गणना करता है जो आवधिक ब्याज दर पर उस अवधि में भुगतान की संख्या पर. " + +#. Gross Profit Margin Dialog: Description of calculation +#: ../data/financial.ui.h:22 +msgid "" +"Calculates the resale price of a product, based on the product cost and the " +"wanted gross profit margin." +msgstr "किसी उत्पाद की पुनर्विक्रिय मूल्य की गणना करता है, उत्पाद लागत और वांछित सकल लाभांश के आधार पर." + +#. Straight-Line Depreciation Dialog: Description of calculation +#: ../data/financial.ui.h:24 +msgid "" +"Calculates the straight-line depreciation of an asset for one period. The " +"straight-line method of depreciation divides the depreciable cost evenly " +"over the useful life of an asset. The useful life is the number of periods, " +"typically years, over which an asset is depreciated. " +msgstr "किसी एक अवधि के लिए परिसंपत्ति के प्रत्य़क्ष पंक्ति मूल्यह्रास की गणना करता है. मूल्यह्रास की प्रत्यक्ष विधि मूल्यह्रास लागत को बांटता है जो कि परिसंपत्ति के किसी उपयोगी जीवन पर मान रूप से वितरित रहता है. उपयोगी जीवन अवधि की संख्या है, खासकर वर्ण, जिस पर कि कोई परिसंपत्ति का मूल्यह्रास होता है. " + +#. Title of Compounding Term dialog +#: ../data/financial.ui.h:26 +msgid "Compounding Term" +msgstr "मिश्रित पद" + +#. Title of Double-Declining Depreciation dialog +#: ../data/financial.ui.h:28 +msgid "Double-Declining Depreciation" +msgstr "दोहरी घटती कमी" + +#. Title of Future Value dialog +#: ../data/financial.ui.h:30 +msgid "Future Value" +msgstr "भविष्य मान" + +#. Payment Period Dialog: Label before future value input +#: ../data/financial.ui.h:32 +msgid "Future _Value:" +msgstr "भविष्य मान" + +#. Title of Gross Profit Margin dialog +#: ../data/financial.ui.h:34 ../data/gcalctool.ui.h:209 +msgid "Gross Profit Margin" +msgstr "कुल लाभांश" + +#. Title of Payment Period dialog +#: ../data/financial.ui.h:36 +msgid "Payment Period" +msgstr "भुगतान काल" + +#. Title of Periodic Interest Rate dialog +#: ../data/financial.ui.h:38 +msgid "Periodic Interest Rate" +msgstr "कालिक ब्याज दर" + +#. Payment Period Dialog: Label before periodic interest rate input +#: ../data/financial.ui.h:40 +msgid "Periodic Interest _Rate:" +msgstr "आवधिक ब्याज दर" + +#. Title of Periodic Payment dialog +#: ../data/financial.ui.h:42 +msgid "Periodic Payment" +msgstr "आवधिक भुगतान" + +#. Title of Present Value dialog +#: ../data/financial.ui.h:44 +msgid "Present Value" +msgstr "वर्तमान मान" + +#. Periodic Interest Rate Dialog: Label before present value input +#: ../data/financial.ui.h:46 +msgid "Present _Value:" +msgstr "वर्तमान मान" + +#. Title of Straight-Line Depreciation dialog +#: ../data/financial.ui.h:48 +msgid "Straight-Line Depreciation" +msgstr "सीधी पंक्ति कमी" + +#. Title of Sum-Of-The-Years'-Digits Depreciation dialog +#: ../data/financial.ui.h:50 +msgid "Sum-Of-The-Years'-Digits Depreciation" +msgstr "साल के अंक कमी का जोड़" + +#. Sum-Of-The-Years'-Digits Depreciation Dialog: Label before cost input +#: ../data/financial.ui.h:52 +msgid "_Cost:" +msgstr "लागत (_C):" + +#. Periodic Interest Rate Dialog: Label before future value input +#: ../data/financial.ui.h:54 +msgid "_Future Value:" +msgstr "भविष्य मान (_F):" + +#. Sum-Of-The-Years'-Digits Depreciation Dialog: Label before life input +#: ../data/financial.ui.h:56 +msgid "_Life:" +msgstr "जीवन (_L):" + +#. Gross Profit Margin Dialog: Label before margin input +#: ../data/financial.ui.h:58 +msgid "_Margin:" +msgstr "हाशिया (_M):" + +#. Present Value Dialog: Label before number of periods input +#: ../data/financial.ui.h:60 +msgid "_Number Of Periods:" +msgstr "अवधि की संख्या (_N):" + +#. Sum-Of-The-Years'-Digits Depreciation Dialog: Label before period input +#: ../data/financial.ui.h:62 +msgid "_Period:" +msgstr "अवधि (_P):" + +#. Payment Period Dialog: Label before periodic payment input +#: ../data/financial.ui.h:64 +msgid "_Periodic Payment:" +msgstr "कालिक भुगतान (_P):" + +#. Periodic Payment Dialog: Label before principal input +#: ../data/financial.ui.h:66 +msgid "_Principal:" +msgstr "प्रधान (_P):" + +#. Sum-Of-The-Years'-Digits Depreciation Dialog: Label before salvage input +#: ../data/financial.ui.h:68 +msgid "_Salvage:" +msgstr "_Salvage:" + +#. Periodic Interest Rate Dialog: Label before term input +#: ../data/financial.ui.h:70 +msgid "_Term:" +msgstr "पद" + +#. The percentage button +#: ../data/gcalctool.ui.h:3 +#, no-c-format +msgid "%" +msgstr "%" + +#. Subtraction button +#: ../data/gcalctool.ui.h:5 +msgid "−" +msgstr "−" + +#. Square root button +#: ../data/gcalctool.ui.h:7 +msgid "√" +msgstr "√" + +#. Change sign button +#: ../data/gcalctool.ui.h:9 +msgid "±" +msgstr "±" + +#. Multiplication button +#: ../data/gcalctool.ui.h:11 +msgid "×" +msgstr "×" + +#. Division button +#: ../data/gcalctool.ui.h:13 +msgid "÷" +msgstr "÷" + +#. Start calculation group button +#: ../data/gcalctool.ui.h:15 +msgid "(" +msgstr "(" + +#: ../data/gcalctool.ui.h:16 +#| msgid "Ln" +msgid "(Ln)" +msgstr "(Ln)" + +#: ../data/gcalctool.ui.h:17 +msgid "(Set accuracy from 0 to N numeric places [A])" +msgstr "(0 से N सांख्यिक स्थान तक शुद्धता सेट करें [A])" + +#: ../data/gcalctool.ui.h:18 +msgid "(X^Y)" +msgstr "(X^Y)" + +#: ../data/gcalctool.ui.h:19 +msgid "(cos)" +msgstr "(cos)" + +#: ../data/gcalctool.ui.h:20 +msgid "(log)" +msgstr "(log)" + +#: ../data/gcalctool.ui.h:21 +msgid "(log2)" +msgstr "(log2)" + +#: ../data/gcalctool.ui.h:22 +msgid "(sin)" +msgstr "(sin)" + +#: ../data/gcalctool.ui.h:23 +msgid "(tan)" +msgstr "(tan)" + +#. Right bracket +#: ../data/gcalctool.ui.h:25 +msgid ")" +msgstr ")" + +#. Addition button +#: ../data/gcalctool.ui.h:27 +msgid "+" +msgstr "+" + +#. Numeric 0 button +#: ../data/gcalctool.ui.h:29 +msgid "0" +msgstr "0" + +#. Numeric 1 button +#: ../data/gcalctool.ui.h:31 +msgid "1" +msgstr "1" + +#. 1's complement +#: ../data/gcalctool.ui.h:33 +msgid "1's" +msgstr "1's" + +#: ../data/gcalctool.ui.h:34 +msgid "1's complement [z]" +msgstr "1 का पूरक [z]" + +#. Reciprocal button +#: ../data/gcalctool.ui.h:36 +msgid "1/<i>x</i>" +msgstr "1/<i>x</i>" + +#: ../data/gcalctool.ui.h:37 +msgid "1/x" +msgstr "1/x" + +#. Right Shift Popup: Menu item to shift right by 10 bits +#: ../data/gcalctool.ui.h:39 +msgid "10 places" +msgstr "10 स्थान" + +#. Right Shift Popup: Menu item to shift right by 11 bits +#: ../data/gcalctool.ui.h:41 +msgid "11 places" +msgstr "11 स्थान" + +#. Right Shift Popup: Menu item to shift right by 12 bits +#: ../data/gcalctool.ui.h:43 +msgid "12 places" +msgstr "12 स्थान" + +#. Right Shift Popup: Menu item to shift right by 13 bits +#: ../data/gcalctool.ui.h:45 +msgid "13 places" +msgstr "13 स्थान" + +#. Right Shift Popup: Menu item to shift right by 14 bits +#: ../data/gcalctool.ui.h:47 +msgid "14 places" +msgstr "14 स्थान" + +#. Label for bit 15 on the bit editor +#: ../data/gcalctool.ui.h:49 +msgid "15" +msgstr "15" + +#. Right Shift Popup: Menu item to shift right by 15 bits +#: ../data/gcalctool.ui.h:51 +msgid "15 places" +msgstr "15 स्थान" + +#. Numeric 2 button +#: ../data/gcalctool.ui.h:53 +msgid "2" +msgstr "2" + +#. 2's complement +#: ../data/gcalctool.ui.h:55 +msgid "2's" +msgstr "2's" + +#: ../data/gcalctool.ui.h:56 +msgid "2's complement [Z]" +msgstr "2 का पूरक [Z]" + +#. Numeric 3 button +#: ../data/gcalctool.ui.h:58 +msgid "3" +msgstr "3" + +#. Label for bit 31 on the bit editor +#: ../data/gcalctool.ui.h:60 +msgid "31" +msgstr "31" + +#. Label for bit 32 on the bit editor +#: ../data/gcalctool.ui.h:62 +msgid "32" +msgstr "32" + +#. Numeric 4 button +#: ../data/gcalctool.ui.h:64 +msgid "4" +msgstr "4" + +#. Label for bit 47 on the bit editor +#: ../data/gcalctool.ui.h:66 +msgid "47" +msgstr "47" + +#. Numeric 5 button +#: ../data/gcalctool.ui.h:68 +msgid "5" +msgstr "5" + +#. Numeric 6 button +#: ../data/gcalctool.ui.h:70 +msgid "6" +msgstr "6" + +#. Label for the most significant bit (bit 63) on the bit editor +#: ../data/gcalctool.ui.h:72 +msgid "63" +msgstr "63" + +#. Numeric 7 button +#: ../data/gcalctool.ui.h:74 +msgid "7" +msgstr "7" + +#. Numeric 8 button +#: ../data/gcalctool.ui.h:76 +msgid "8" +msgstr "8" + +#. Numeric 9 button +#: ../data/gcalctool.ui.h:78 +msgid "9" +msgstr "9" + +#. Shift left button +#: ../data/gcalctool.ui.h:80 +msgid "<" +msgstr "<" + +#. Factorial +#: ../data/gcalctool.ui.h:82 +msgid "<i>x</i>!" +msgstr "<i>x</i>!" + +#. x to the power of 2 button +#: ../data/gcalctool.ui.h:84 +msgid "<i>x</i><sup>2</sup>" +msgstr "<i>x</i><sup>2</sup>" + +#. Edit Function Dialog: Note about what base numbers will be entered as +#: ../data/gcalctool.ui.h:86 +msgid "" +"<small><i><b>Note:</b> All constant values are specified in the decimal " +"numeric base.</i></small>" +msgstr "<small><i><b>नोट:</b> सभी स्थिर मूल्य दशमलव अंक मूल में निर्दिष्ट हैं.</i></small>" + +#. "R0" is the abbreviation for "Register 0", used in the memory register dialog +#: ../data/gcalctool.ui.h:88 +msgid "<span weight=\"bold\">R0</span>" +msgstr "<span weight=\"bold\">R0</span>" + +#. "R1" is the abbreviation for "Register 1", used in the memory register dialog +#: ../data/gcalctool.ui.h:90 +msgid "<span weight=\"bold\">R1</span>" +msgstr "<span weight=\"bold\">R1</span>" + +#. "R2" is the abbreviation for "Register 2", used in the memory register dialog +#: ../data/gcalctool.ui.h:92 +msgid "<span weight=\"bold\">R2</span>" +msgstr "<span weight=\"bold\">R2</span>" + +#. "R3" is the abbreviation for "Register 3", used in the memory register dialog +#: ../data/gcalctool.ui.h:94 +msgid "<span weight=\"bold\">R3</span>" +msgstr "<span weight=\"bold\">R3</span>" + +#. "R4" is the abbreviation for "Register 4", used in the memory register dialog +#: ../data/gcalctool.ui.h:96 +msgid "<span weight=\"bold\">R4</span>" +msgstr "<span weight=\"bold\">R4</span>" + +#. "R5" is the abbreviation for "Register 5", used in the memory register dialog +#: ../data/gcalctool.ui.h:98 +msgid "<span weight=\"bold\">R5</span>" +msgstr "<span weight=\"bold\">R5</span>" + +#. "R6" is the abbreviation for "Register 6", used in the memory register dialog +#: ../data/gcalctool.ui.h:100 +msgid "<span weight=\"bold\">R6</span>" +msgstr "<span weight=\"bold\">R6</span>" + +#. "R7" is the abbreviation for "Register 7", used in the memory register dialog +#: ../data/gcalctool.ui.h:102 +msgid "<span weight=\"bold\">R7</span>" +msgstr "<span weight=\"bold\">R7</span>" + +#. "R8" is the abbreviation for "Register 8", used in the memory register dialog +#: ../data/gcalctool.ui.h:104 +msgid "<span weight=\"bold\">R8</span>" +msgstr "<span weight=\"bold\">R8</span>" + +#. "R9" is the abbreviation for "Register 9", used in the memory register dialog +#: ../data/gcalctool.ui.h:106 +msgid "<span weight=\"bold\">R9</span>" +msgstr "<span weight=\"bold\">R9</span>" + +#. Solve button (clicking this solves the displayed calculation) +#: ../data/gcalctool.ui.h:108 +msgid "=" +msgstr "=" + +#. Shift right button +#: ../data/gcalctool.ui.h:110 +msgid ">" +msgstr ">" + +#. Hexadecimal digit A button +#: ../data/gcalctool.ui.h:112 +msgid "A" +msgstr "A" + +#. Boolean AND button +#: ../data/gcalctool.ui.h:114 +msgid "AND" +msgstr "AND" + +#. Absolute value button. Abs is short for Absolute +#: ../data/gcalctool.ui.h:116 +msgid "Abs" +msgstr "Abs" + +#: ../data/gcalctool.ui.h:117 +msgid "Absolute value" +msgstr "निरपेक्ष मान" + +#: ../data/gcalctool.ui.h:118 +msgid "Absolute value [u]" +msgstr "निरपेक्ष मान [u]" + +#. Accuracy button +#: ../data/gcalctool.ui.h:120 +msgid "Acc" +msgstr "Acc" + +#: ../data/gcalctool.ui.h:121 +msgid "Add" +msgstr "जोड़ें" + +#: ../data/gcalctool.ui.h:122 +msgid "Add [+]" +msgstr "जोड़ें [+]" + +#: ../data/gcalctool.ui.h:123 +msgid "Advanced" +msgstr "उन्नत" + +#. Hexadecimal digit B button +#: ../data/gcalctool.ui.h:125 +msgid "B" +msgstr "B" + +#: ../data/gcalctool.ui.h:126 +msgid "Backspace" +msgstr "बेकस्पेस" + +#: ../data/gcalctool.ui.h:127 +msgid "Basic" +msgstr "मूल" + +#: ../data/gcalctool.ui.h:128 +msgid "Bitwise AND [&]" +msgstr "बिटआधारित AND [&]" + +#: ../data/gcalctool.ui.h:129 +msgid "Bitwise NOT [~]" +msgstr "बिटआधारित NOT [~]" + +#: ../data/gcalctool.ui.h:130 +msgid "Bitwise OR [|]" +msgstr "बिटआधारित OR [|]" + +#: ../data/gcalctool.ui.h:131 +msgid "Bitwise XNOR [{]" +msgstr "Bitwise XNOR [{]" + +#: ../data/gcalctool.ui.h:132 +msgid "Bitwise XOR [x]" +msgstr "बिटआधारित XOR [x]" + +#. Bksp is short for Backspace +#: ../data/gcalctool.ui.h:134 +msgid "Bksp" +msgstr "Bksp" + +#. Hexadecimal digit C button +#: ../data/gcalctool.ui.h:136 ../src/gtk.c:1700 +msgid "C" +msgstr "C" + +#. Clear displayed value button +#: ../data/gcalctool.ui.h:138 +msgid "CE" +msgstr "CE" + +#: ../data/gcalctool.ui.h:139 +msgid "Calculate result" +msgstr "परिणाम गणणा" + +#: ../data/gcalctool.ui.h:140 +msgid "Calculate result [=]" +msgstr "गणना परिणाम [=]" + +#. Insert ASCII dialog: Label before character entry +#: ../data/gcalctool.ui.h:142 +msgid "Ch_aracter:" +msgstr "अक्षर (_a):" + +#: ../data/gcalctool.ui.h:143 +msgid "Change Sign [C]" +msgstr "चिन्ह बदलें [C]" + +#: ../data/gcalctool.ui.h:144 +msgid "Change sign" +msgstr "चिन्ह बदलें" + +#: ../data/gcalctool.ui.h:145 +msgid "Clear" +msgstr "खाली" + +#: ../data/gcalctool.ui.h:146 +msgid "Clear displayed value [Escape]" +msgstr "प्रदर्शित मूल्य साफ करें [Escape]" + +#: ../data/gcalctool.ui.h:147 +msgid "Clear displayed value and any partial calculation [Shift Delete]" +msgstr "प्रदर्शित मूल्य तथा कोई भी अधूरी गणना साफ करें [Shift Delete]" + +#: ../data/gcalctool.ui.h:148 +msgid "Clear entry" +msgstr "प्रविष्टि साफ करें" + +#. Edit Functions Dialog: Instructions in dialog +#: ../data/gcalctool.ui.h:150 +msgid "Click a _value or description to edit it:" +msgstr "संपादन हेतु एक मूल्य या वर्णन पर क्लिक करें (_v):" + +#. Clear display button. Clr is short for Clear +#: ../data/gcalctool.ui.h:152 +msgid "Clr" +msgstr "Clr" + +#: ../data/gcalctool.ui.h:153 +msgid "Compounding term" +msgstr "मिश्रित पद" + +#: ../data/gcalctool.ui.h:154 +msgid "Compounding term [m]" +msgstr "मिश्रित पद [m]" + +#. Constants button +#: ../data/gcalctool.ui.h:156 +msgid "Con" +msgstr "Con" + +#: ../data/gcalctool.ui.h:157 +msgid "Constants [#]" +msgstr "स्थिरांक [#]" + +#: ../data/gcalctool.ui.h:158 +msgid "Copy selection" +msgstr "चुने की नकल" + +#. Calculates the number of compounding periods necessary to increase an investment of present value pv to a future value of fv, at a fixed interest rate of int per compounding period. See also: http://en.wikipedia.org/wiki/Compound_interest +#: ../data/gcalctool.ui.h:160 +msgid "Ctrm" +msgstr "Ctrm" + +#. Hexadecimal digit D button +#: ../data/gcalctool.ui.h:162 +msgid "D" +msgstr "D" + +#. Calculates the depreciation allowance on an asset for a specified period of time, using the double-declining balance method. See also: http://en.wikipedia.org/wiki/Depreciation +#: ../data/gcalctool.ui.h:164 +msgid "Ddb" +msgstr "Ddb" + +#. Degrees radio button +#: ../data/gcalctool.ui.h:166 +msgid "De_grees" +msgstr "डिग्री (_g)" + +#: ../data/gcalctool.ui.h:167 +msgid "Divide" +msgstr "भाग" + +#: ../data/gcalctool.ui.h:168 +msgid "Divide [/]" +msgstr "भाग [/]" + +#: ../data/gcalctool.ui.h:169 +msgid "Double-declining depreciation" +msgstr "दोहरी घटती कमी" + +#: ../data/gcalctool.ui.h:170 +msgid "Double-declining depreciation [D]" +msgstr "दोहरी घटती कमी [D]" + +#. Hexadecimal digit E button +#: ../data/gcalctool.ui.h:172 +msgid "E" +msgstr "E" + +#. Engineering display radio button +#: ../data/gcalctool.ui.h:174 +msgid "E_ng" +msgstr "अं. (_n)" + +#. Title of edit constants dialog +#: ../data/gcalctool.ui.h:176 +msgid "Edit Constants" +msgstr "स्थिरांक संपादित करें" + +#. Menu item in the constants menu to show the Edit Constants dialog +#: ../data/gcalctool.ui.h:178 +msgid "Edit Constants..." +msgstr "स्थिरांक संपादित करें..." + +#. Title of edit functions dialog +#: ../data/gcalctool.ui.h:180 +msgid "Edit Functions" +msgstr "फंक्शन्स संपादित करें" + +#. Menu item in the constants menu to show the Edit Functions dialog +#: ../data/gcalctool.ui.h:182 +msgid "Edit Functions..." +msgstr "फंक्शन्स संपादित करें..." + +#: ../data/gcalctool.ui.h:183 +msgid "End group of calculations [)]" +msgstr "गणन समूह का अन्त [)]" + +#: ../data/gcalctool.ui.h:184 +msgid "Enter an exponential number [E]" +msgstr "एक्सपोनेनशियल संख्या दें [E]" + +#. Memory exchange button. Exch is short for Exchange +#: ../data/gcalctool.ui.h:186 +msgid "Exch" +msgstr "Exch" + +#: ../data/gcalctool.ui.h:187 +msgid "Exchange displayed value with memory register [X]" +msgstr "स्मृति पंजी के साथ प्रदर्शित मान लेनदेन करें [X]" + +#: ../data/gcalctool.ui.h:188 +msgid "Exchange with register" +msgstr "रजिस्टर के साथ विनिमय" + +#. Exponential +#: ../data/gcalctool.ui.h:190 +msgid "Exp" +msgstr "Exp" + +#. Hexadecimal digit F button +#: ../data/gcalctool.ui.h:192 ../src/gtk.c:1723 +msgid "F" +msgstr "F" + +#: ../data/gcalctool.ui.h:193 +msgid "Factorial of displayed value [!]" +msgstr "फैक्टोरियल प्रदर्शित मान का [!]" + +#: ../data/gcalctool.ui.h:194 +msgid "Financial" +msgstr "वित्तीय" + +#. Fractional portion button +#: ../data/gcalctool.ui.h:196 +msgid "Frac" +msgstr "अंश" + +#: ../data/gcalctool.ui.h:197 +msgid "Fractional portion" +msgstr "अंश हिस्सा" + +#: ../data/gcalctool.ui.h:198 +msgid "Fractional portion of displayed value [:]" +msgstr "प्रदर्शित मान का Fractional अंश [:]" + +#. Functions button +#: ../data/gcalctool.ui.h:200 +msgid "Fun" +msgstr "फंक्." + +#: ../data/gcalctool.ui.h:201 +msgid "Future value" +msgstr "भविष्य मान" + +#: ../data/gcalctool.ui.h:202 +msgid "Future value [v]" +msgstr "भविष्य मान [v]" + +#. Calculates the future value of an investment based on a series of equal payments, each of amount pmt, at a periodic interest rate of int, over the number of payment periods in the term. See also: http://en.wikipedia.org/wiki/Future_value +#: ../data/gcalctool.ui.h:204 +msgid "Fv" +msgstr "Fv" + +#. Calculates the resale price of a product, based on the product cost and the wanted gross profit margin. See also: http://en.wikipedia.org/wiki/Gross_profit_margin +#: ../data/gcalctool.ui.h:206 +msgid "Gpm" +msgstr "Gpm" + +#. Gradians radio button +#: ../data/gcalctool.ui.h:208 +msgid "Gr_adians" +msgstr "ग्रेडियन्स(_a)" + +#: ../data/gcalctool.ui.h:210 +msgid "Gross Profit Margin [I]" +msgstr "कुल लाभांश [I]" + +#: ../data/gcalctool.ui.h:211 +msgid "Gross Profit Margin [g]" +msgstr "कुल लाभांश [g]" + +#. Hyperbolic check box +#: ../data/gcalctool.ui.h:213 +msgid "H_yp" +msgstr "हाइप. (_y)" + +#. Base 16 radio button +#: ../data/gcalctool.ui.h:215 +msgid "He_x" +msgstr "षष्ट (_x)" + +#: ../data/gcalctool.ui.h:216 +msgid "Hexadecimal digit A [a]" +msgstr "हेक्साडेसीमल अंक A [a]" + +#: ../data/gcalctool.ui.h:217 +msgid "Hexadecimal digit B [b]" +msgstr "हेक्साडेसीमल अंक B [b]" + +#: ../data/gcalctool.ui.h:218 +msgid "Hexadecimal digit C [c]" +msgstr "हेक्साडेसीमल अंक C [c]" + +#: ../data/gcalctool.ui.h:219 +msgid "Hexadecimal digit D [d]" +msgstr "हेक्साडेसीमल अंक D [d]" + +#: ../data/gcalctool.ui.h:220 +msgid "Hexadecimal digit E [e]" +msgstr "हेक्साडेसीमल अंक E [e]" + +#: ../data/gcalctool.ui.h:221 +msgid "Hexadecimal digit F [f]" +msgstr "हेक्साडेसीमल अंक F [f]" + +#. Title of insert ASCII dialog +#: ../data/gcalctool.ui.h:223 +msgid "Insert ASCII Value" +msgstr "एसकी मान प्रविष्ट करें" + +#: ../data/gcalctool.ui.h:224 +msgid "Insert ASCII value" +msgstr "एसकी मान प्रविष्ट करें" + +#. Integer portion button +#: ../data/gcalctool.ui.h:226 +msgid "Int" +msgstr "इंट." + +#: ../data/gcalctool.ui.h:227 +msgid "Integer portion" +msgstr "पूर्णांक भाग" + +#: ../data/gcalctool.ui.h:228 +msgid "Integer portion of displayed value [i]" +msgstr "प्रदर्शित मान का पूर्णांक भाग [i]" + +#: ../data/gcalctool.ui.h:229 +msgid "Left bracket" +msgstr "बांया कोष्ठक" + +#: ../data/gcalctool.ui.h:230 +msgid "Makes the bitwise functions use 16 bit mode" +msgstr "बिटवाइज फंक्शन को 16 बिट मोड प्रयोग करने देता है" + +#: ../data/gcalctool.ui.h:231 +msgid "Makes the bitwise functions use 32 bit mode" +msgstr "बिटवाइज फंक्शन को 32 बिट मोड प्रयोग करने देता है" + +#: ../data/gcalctool.ui.h:232 +msgid "Makes the bitwise functions use 64 bit mode" +msgstr "बिटवाइज फंक्शन को 64 बिट मोड प्रयोग करने देता है" + +#: ../data/gcalctool.ui.h:233 +msgid "Memory Registers" +msgstr "मेमोरी रजिस्टर्स" + +#. Modulus division button +#: ../data/gcalctool.ui.h:235 +msgid "Mod" +msgstr "Mod" + +#: ../data/gcalctool.ui.h:236 +msgid "Modulus Division [M]" +msgstr "मौड्यूलस विभाजन [M]" + +#: ../data/gcalctool.ui.h:237 +msgid "Multiply" +msgstr "गुणा" + +#: ../data/gcalctool.ui.h:238 +msgid "Multiply [*]" +msgstr "गुणा [*]" + +#. Boolean NOT button +#: ../data/gcalctool.ui.h:240 +msgid "NOT" +msgstr "NOT" + +#: ../data/gcalctool.ui.h:241 +msgid "Numeric 0" +msgstr "अंक ०" + +#: ../data/gcalctool.ui.h:242 +msgid "Numeric 1" +msgstr "अंक १" + +#: ../data/gcalctool.ui.h:243 +msgid "Numeric 2" +msgstr "अंक २" + +#: ../data/gcalctool.ui.h:244 +msgid "Numeric 3" +msgstr "अंक ३" + +#: ../data/gcalctool.ui.h:245 +msgid "Numeric 4" +msgstr "अंक ४" + +#: ../data/gcalctool.ui.h:246 +msgid "Numeric 5" +msgstr "अंक ५" + +#: ../data/gcalctool.ui.h:247 +msgid "Numeric 6" +msgstr "अंक ६" + +#: ../data/gcalctool.ui.h:248 +msgid "Numeric 7" +msgstr "अंक ७" + +#: ../data/gcalctool.ui.h:249 +msgid "Numeric 8" +msgstr "अंक ८" + +#: ../data/gcalctool.ui.h:250 +msgid "Numeric 9" +msgstr "अंक ९" + +#: ../data/gcalctool.ui.h:251 +msgid "Numeric point" +msgstr "अंकीय बिंदु" + +#. Boolean OR button +#: ../data/gcalctool.ui.h:253 +msgid "OR" +msgstr "OR" + +#: ../data/gcalctool.ui.h:254 +msgid "Paste selection" +msgstr "चुने हुए को चिपकाएँ" + +#: ../data/gcalctool.ui.h:255 +msgid "Payment period" +msgstr "भुगतान काल" + +#: ../data/gcalctool.ui.h:256 +msgid "Payment period [t]" +msgstr "भुगतान काल [t]" + +#: ../data/gcalctool.ui.h:257 +msgid "Percentage" +msgstr "प्रतिशत" + +#: ../data/gcalctool.ui.h:259 +#, no-c-format +msgid "Percentage [%]" +msgstr "प्रतिशत [%]" + +#: ../data/gcalctool.ui.h:260 +msgid "Periodic interest rate" +msgstr "कालिक व्याज दर" + +#: ../data/gcalctool.ui.h:261 +msgid "Periodic interest rate [T]" +msgstr "कालिक व्याज दर [T]" + +#: ../data/gcalctool.ui.h:262 +msgid "Periodic payment" +msgstr "कालिक भुगतान" + +#: ../data/gcalctool.ui.h:263 +msgid "Periodic payment [P]" +msgstr "कालिक भुगतान [P]" + +#. Calculates the amount of the periodic payment of a loan, where payments are made at the end of each payment period. See also: http://en.wikipedia.org/wiki/Amortization_schedule +#: ../data/gcalctool.ui.h:265 +msgid "Pmt" +msgstr "Pmt" + +#: ../data/gcalctool.ui.h:266 +msgid "Present value" +msgstr "वर्तमान मान" + +#: ../data/gcalctool.ui.h:267 +msgid "Present value [p]" +msgstr "वर्तमान मान [p]" + +#: ../data/gcalctool.ui.h:268 +msgid "Programming" +msgstr "प्रोग्रामिंग" + +#. Calculates the present value of an investment based on a series of equal payments, each of amount pmt, discounted at a periodic interest rate of int, over the number of payment periods in the term. See also: http://en.wikipedia.org/wiki/Present_value +#: ../data/gcalctool.ui.h:270 +msgid "Pv" +msgstr "Pv" + +#: ../data/gcalctool.ui.h:271 +msgid "Quit the calculator" +msgstr "गणक से बाहर आएँ" + +#. Random number +#: ../data/gcalctool.ui.h:273 +msgid "Rand" +msgstr "रैण्ड" + +#: ../data/gcalctool.ui.h:274 +msgid "Random number in the range 0.0 to 1.0 [?]" +msgstr "0.0 से 1.0 के क्रम में यादृच्छिक संख्या [?]" + +#. Calculates the periodic interest necessary to increase an investment of present value pv to a future value of fv, over the number of compounding periods in term. See also: http://en.wikipedia.org/wiki/Interest +#: ../data/gcalctool.ui.h:276 +msgid "Rate" +msgstr "रेट" + +#. Memory recall button. Rcl is short for Recall +#: ../data/gcalctool.ui.h:278 +msgid "Rcl" +msgstr "Rcl" + +#: ../data/gcalctool.ui.h:279 +msgid "Reciprocal" +msgstr "उल्टा" + +#: ../data/gcalctool.ui.h:280 +msgid "Reciprocal [r]" +msgstr "उल्टा [r]" + +#: ../data/gcalctool.ui.h:281 +msgid "Redo" +msgstr "फिर से करें" + +#: ../data/gcalctool.ui.h:282 +msgid "Remove rightmost character from displayed value [Backspace]" +msgstr "प्रदर्शित मूल्य में से आखिरी दाएँ वर्ण को मिटाएँ [Backspace]" + +#: ../data/gcalctool.ui.h:283 +msgid "Result Region" +msgstr "परिणाम क्षेत्र" + +#: ../data/gcalctool.ui.h:284 +msgid "Retrieve from register" +msgstr "रजिस्टर से निकालें" + +#: ../data/gcalctool.ui.h:285 +msgid "Retrieve memory register to display [R]" +msgstr "स्मृति पंजी को दिखाने के लिये हासिल करें [R]" + +#: ../data/gcalctool.ui.h:286 +msgid "Right bracket" +msgstr "दांया कोष्ठक" + +#: ../data/gcalctool.ui.h:287 +msgid "Scientific" +msgstr "वैज्ञानिक" + +#. Title of set precision dialog +#: ../data/gcalctool.ui.h:289 +msgid "Set Precision" +msgstr "शुद्धता सेट करें" + +#: ../data/gcalctool.ui.h:290 +msgid "Set display type to engineering format" +msgstr "प्रदर्शक प्रकार इंजीनियरिंग फॉर्मेट में नियत करें" + +#: ../data/gcalctool.ui.h:291 +msgid "Set display type to fixed-point format" +msgstr "प्रदर्शक प्रकार फ़िक्स्ड-पाइंट फॉर्मेट में नियत करें" + +#: ../data/gcalctool.ui.h:292 +msgid "Set display type to scientific format" +msgstr "प्रदर्शक प्रकार वैज्ञानिक फॉर्मेट में नियत करें" + +#: ../data/gcalctool.ui.h:293 +msgid "Set hyperbolic option for trigonometric functions" +msgstr "त्रिकोणमिती फंक्शन्स हेतु हायपरबोलिक विकल्प नियत करें" + +#: ../data/gcalctool.ui.h:294 +msgid "Set inverse option for trigonometric functions" +msgstr "त्रिकोणमिती फंक्शन्स हेतु उलटा विकल्प नियत करें" + +#: ../data/gcalctool.ui.h:295 +msgid "Set numeric base to binary (base 2)" +msgstr "अंकीय मूल द्विचर में नियत करें (मूल 2)" + +#: ../data/gcalctool.ui.h:296 +msgid "Set numeric base to decimal (base 10)" +msgstr "अंकीय मूल दशमलव में नियत करें (मूल 10)" + +#: ../data/gcalctool.ui.h:297 +msgid "Set numeric base to hexadecimal (base 16)" +msgstr "अंकीय मूल हेक्साडेसीमल में करें (मूल 16)" + +#: ../data/gcalctool.ui.h:298 +msgid "Set numeric base to octal (base 8)" +msgstr "अंकीय मूल ऑक्टल में नियत करें (मूल 8)" + +#: ../data/gcalctool.ui.h:299 +msgid "Set trigonometric type to degrees" +msgstr "त्रिकोणमितीय प्रकार डिग्रीज़ में नियत करें" + +#: ../data/gcalctool.ui.h:300 +msgid "Set trigonometric type to gradians" +msgstr "त्रिकोणमितीय प्रकार ग्रेडियन्स में नियत करें" + +#: ../data/gcalctool.ui.h:301 +msgid "Set trigonometric type to radians" +msgstr "त्रिकोणमितीय प्रकार रेडियन्स में नियत करें" + +#: ../data/gcalctool.ui.h:302 +msgid "Shift displayed value 1-15 places to the left [<]" +msgstr "प्रदर्शित मूल्य 1-15 स्थान बाएँ खिसकाएँ [<]" + +#: ../data/gcalctool.ui.h:303 +msgid "Shift displayed value 1-15 places to the right [>]" +msgstr "प्रदर्शित मूल्य 1-15 स्थान दाएँ खिसकाएँ [>]" + +#. View|Show Thousands Separator menu item +#: ../data/gcalctool.ui.h:305 +msgid "Show T_housands Separator" +msgstr "हजार विभाजक दिखाएँ (_h)" + +#. Accuracy Popup: Check menu item to enable trailing zeroes +#: ../data/gcalctool.ui.h:307 +msgid "Show _Trailing Zeroes" +msgstr "ट्रैलिंग शून्य दिखाएं (_T)" + +#: ../data/gcalctool.ui.h:308 +msgid "Show help contents" +msgstr "सहायता तत्व दिखाएँ" + +#: ../data/gcalctool.ui.h:309 +msgid "Show memory registers" +msgstr "मेमोरी रेजिस्ँ दिखाएँM)" + +#: ../data/gcalctool.ui.h:310 +msgid "Show the About Gcalctool dialog" +msgstr "Gcalctool संवाद के बारे में दिखायें" + +#: ../data/gcalctool.ui.h:311 +msgid "Show thousands separator" +msgstr "हजार विभाजक दिखाएँ" + +#: ../data/gcalctool.ui.h:312 +msgid "Show trailing zeroes" +msgstr "अंत मे अतिरिक्त शून्य दिाएँ" + +#. Set Precision Dialog: Label before the significant places spin button +#: ../data/gcalctool.ui.h:314 +msgid "Significant _places:" +msgstr "महत्वपूर्ण स्थान (_p):" + +#. Calculates the straight-line depreciation of an asset for one period. The depreciable cost is cost - salvage. The straight-line method of depreciation divides the depreciable cost evenly over the useful life of an asset. The useful life is the number of periods, typically years, over which an asset is depreciated. See also: http://en.wikipedia.org/wiki/Depreciation +#: ../data/gcalctool.ui.h:316 +msgid "Sln" +msgstr "Sln" + +#: ../data/gcalctool.ui.h:317 +msgid "Square" +msgstr "वर्ग" + +#: ../data/gcalctool.ui.h:318 +msgid "Square [@]" +msgstr "वर्ग [@]" + +#: ../data/gcalctool.ui.h:319 +msgid "Square root" +msgstr "वर्ग मूल" + +#: ../data/gcalctool.ui.h:320 +msgid "Square root [s]" +msgstr "वर्गमूल [s]" + +#: ../data/gcalctool.ui.h:321 +msgid "Start group of calculations [(]" +msgstr "गणन समूह का आरंभ [(]" + +#. Memory store button. Sto is short for Store +#: ../data/gcalctool.ui.h:323 +msgid "Sto" +msgstr "स्टॉ." + +#: ../data/gcalctool.ui.h:324 +msgid "Store displayed value in memory register [S]" +msgstr "स्मृति पंजी में प्रदर्शित मान रखें [S]" + +#: ../data/gcalctool.ui.h:325 +msgid "Store to register" +msgstr "रेजिस्टर में जमा करें" + +#: ../data/gcalctool.ui.h:326 +msgid "Straight-line depreciation" +msgstr "सीधी पंक्ति कमी" + +#: ../data/gcalctool.ui.h:327 +msgid "Straight-line depreciation [l]" +msgstr "सीधी पंक्ति कमी [l]" + +#: ../data/gcalctool.ui.h:328 +msgid "Subtract" +msgstr "घटाना" + +#: ../data/gcalctool.ui.h:329 +msgid "Subtract [-]" +msgstr "घटाना [-]" + +#: ../data/gcalctool.ui.h:330 +msgid "Sum-of-the years'-digits depreciation" +msgstr "साल के अंक कमी का जोड़" + +#: ../data/gcalctool.ui.h:331 +msgid "Sum-of-the years'-digits depreciation [Y]" +msgstr "Sum-of-the years'-digits depreciation [Y]" + +#: ../data/gcalctool.ui.h:332 +msgid "Sum-of-the years'-digits depreciation [y]" +msgstr "साल के अंक कमी का जोड़ [y]" + +#. Calculates the depreciation allowance on an asset for a specified period of time, using the Sum-Of-The-Years'-Digits method. This method of depreciation accelerates the rate of depreciation, so that more depreciation expense occurs in earlier periods than in later ones. The depreciable cost is cost - salvage. The useful life is the number of periods, typically years, over which an asset is depreciated. See also: http://en.wikipedia.org/wiki/Depreciation +#: ../data/gcalctool.ui.h:334 +msgid "Syd" +msgstr "Syd" + +#. Calculates the number of payment periods that are necessary during the term of an ordinary annuity, to accumulate a future value of fv, at a periodic interest rate of int. Each payment is equal to amount pmt. See also: http://en.wikipedia.org/wiki/Annuity_(finance_theory) +#: ../data/gcalctool.ui.h:336 +msgid "Term" +msgstr "पद" + +#. Truncate displayed value +#: ../data/gcalctool.ui.h:338 +msgid "Trunc" +msgstr "Trunc" + +#: ../data/gcalctool.ui.h:339 +#| msgid "Raise displayed value to the power of y [o]" +msgid "Truncate displayed value to the chosen word size ([)" +msgstr "दिखाए गए मान को चुने गए शब्द आकार में काटें ([)" + +#: ../data/gcalctool.ui.h:340 +msgid "Undo" +msgstr "अनावृत्ति" + +#: ../data/gcalctool.ui.h:341 +msgid "User-defined functions [F]" +msgstr "उपयोक्ता परिभाषित करें [ F]" + +#. Boolean exclusive NOR button +#: ../data/gcalctool.ui.h:343 +msgid "XNOR" +msgstr "XNOR" + +#. Boolean exlcusive OR button +#: ../data/gcalctool.ui.h:345 +msgid "XOR" +msgstr "XOR" + +#. Accuracy Popup: Menu item to set accuracy to 0 significant places +#: ../data/gcalctool.ui.h:347 +msgid "_0 significant places" +msgstr "_0 महत्वपूर्ण स्थान" + +#. Right Shift Popup: Menu item to shift right by 1 bit +#: ../data/gcalctool.ui.h:349 +msgid "_1 place" +msgstr "_1 स्थान " + +#. Accuracy Popup: Menu item to set accuracy to 1 significant place +#: ../data/gcalctool.ui.h:351 +msgid "_1 significant place" +msgstr "_1 महत्वपूर्ण स्थान" + +#. 16 bit radio button +#: ../data/gcalctool.ui.h:353 +msgid "_16 bit" +msgstr "_16 bit" + +#. Right Shift Popup: Menu item to shift right by 2 bits +#: ../data/gcalctool.ui.h:355 +msgid "_2 places" +msgstr "_2 स्थान" + +#. Accuracy Popup: Menu item to set accuracy to 2 significant places +#: ../data/gcalctool.ui.h:357 +msgid "_2 significant places" +msgstr "_2 महत्वपूर्ण स्थान" + +#. Right Shift Popup: Menu item to shift right by 3 bits +#: ../data/gcalctool.ui.h:359 +msgid "_3 places" +msgstr "_3 स्थान" + +#. Accuracy Popup: Menu item to set accuracy to 3 significant places +#: ../data/gcalctool.ui.h:361 +msgid "_3 significant places" +msgstr "_3 महत्वपूर्ण स्थान" + +#. 32 bit radio button +#: ../data/gcalctool.ui.h:363 +msgid "_32 bit" +msgstr "_32 bit" + +#. Right Shift Popup: Menu item to shift right by 4 bits +#: ../data/gcalctool.ui.h:365 +msgid "_4 places" +msgstr "_4 स्थान" + +#. Accuracy Popup: Menu item to set accuracy to 4 significant places +#: ../data/gcalctool.ui.h:367 +msgid "_4 significant places" +msgstr "_4 महत्वपूर्ण स्थान" + +#. Right Shift Popup: Menu item to shift right by 5 bits +#: ../data/gcalctool.ui.h:369 +msgid "_5 places" +msgstr "_5 स्थान" + +#. Accuracy Popup: Menu item to set accuracy to 5 significant places +#: ../data/gcalctool.ui.h:371 +msgid "_5 significant places" +msgstr "_5 महत्वपूर्ण स्थान" + +#. Right Shift Popup: Menu item to shift right by 6 bits +#: ../data/gcalctool.ui.h:373 +msgid "_6 places" +msgstr "_6 स्थान" + +#. Accuracy Popup: Menu item to set accuracy to 6 significant places +#: ../data/gcalctool.ui.h:375 +msgid "_6 significant places" +msgstr "_6 महत्वपूर्ण स्थान" + +#. 64 bit radio button +#: ../data/gcalctool.ui.h:377 +msgid "_64 bit" +msgstr "_64 bit" + +#. Right Shift Popup: Menu item to shift right by 7 bits +#: ../data/gcalctool.ui.h:379 +msgid "_7 places" +msgstr "_7 स्थान" + +#. Accuracy Popup: Menu item to set accuracy to 7 significant places +#: ../data/gcalctool.ui.h:381 +msgid "_7 significant places" +msgstr "_7 महत्वपूर्ण स्थान" + +#. Right Shift Popup: Menu item to shift right by 8 bits +#: ../data/gcalctool.ui.h:383 +msgid "_8 places" +msgstr "_8 स्थान" + +#. Accuracy Popup: Menu item to set accuracy to 8 significant places +#: ../data/gcalctool.ui.h:385 +msgid "_8 significant places" +msgstr "_8 महत्वपूर्ण स्थान" + +#. Right Shift Popup: Menu item to shift right by 9 bits +#: ../data/gcalctool.ui.h:387 +msgid "_9 places" +msgstr "_9 स्थान" + +#. Accuracy Popup: Menu item to set accuracy to 9 significant places +#: ../data/gcalctool.ui.h:389 +msgid "_9 significant places" +msgstr "_9 महत्वपूर्ण स्थान" + +#. View|Advanced menu item +#: ../data/gcalctool.ui.h:391 +msgid "_Advanced" +msgstr "उन्नत (_A)" + +#. View|Basic menu item +#: ../data/gcalctool.ui.h:393 +msgid "_Basic" +msgstr "मौलिक (_B)" + +#. Base 2 radio button +#: ../data/gcalctool.ui.h:395 +msgid "_Bin" +msgstr "_Bin" + +#. Calculator menu +#: ../data/gcalctool.ui.h:397 +msgid "_Calculator" +msgstr "गणक (_C)" + +#: ../data/gcalctool.ui.h:398 +msgid "_Contents" +msgstr "विषय सूची (_C)" + +#. Base 10 radio button +#: ../data/gcalctool.ui.h:400 +msgid "_Dec" +msgstr "दशं (_D)" + +#. Edit menu +#: ../data/gcalctool.ui.h:402 +msgid "_Edit" +msgstr "संपादन (_E)" + +#. View|Financial menu item +#: ../data/gcalctool.ui.h:404 +msgid "_Financial" +msgstr "वित्तिय (_F)" + +#. Fixed-point display radio button +#: ../data/gcalctool.ui.h:406 +msgid "_Fix" +msgstr "फिक्स (_F)" + +#. Help menu +#: ../data/gcalctool.ui.h:408 +msgid "_Help" +msgstr "मदद (_H)" + +#. Insert ASCII dialog: Button to insert selected character +#: ../data/gcalctool.ui.h:410 +msgid "_Insert" +msgstr "प्रविष्ट करें (_I)" + +#. Edit|Insert ASCII value menu item +#: ../data/gcalctool.ui.h:412 +msgid "_Insert ASCII value..." +msgstr "एसकी मान प्रविष्ट करें ...(_I)" + +#. Inverse check box +#: ../data/gcalctool.ui.h:414 +msgid "_Inv" +msgstr "_Inv" + +#. View|Memory Registers menu item +#: ../data/gcalctool.ui.h:416 +msgid "_Memory Registers" +msgstr "मेमोरी रेजिस्टर (_M)" + +#. Base 8 radio button +#: ../data/gcalctool.ui.h:418 +msgid "_Oct" +msgstr "अष्ट (_O)" + +#. View|Programming menu item +#: ../data/gcalctool.ui.h:420 +msgid "_Programming" +msgstr "प्रोग्रामिंग (_P)" + +#. Radian radio button +#: ../data/gcalctool.ui.h:422 +msgid "_Radians" +msgstr "रेडियन (_R)" + +#: ../data/gcalctool.ui.h:423 +msgid "_Redo" +msgstr "दोहराएँ (_R)" + +#. Scientific display radio button +#: ../data/gcalctool.ui.h:425 +msgid "_Sci" +msgstr "वै. (_S)" + +#. View|Scientific menu item +#: ../data/gcalctool.ui.h:427 +msgid "_Scientific" +msgstr "वैज्ञानिक (_S)" + +#. Set Precision Dialog: Button to apply settings +#: ../data/gcalctool.ui.h:429 +msgid "_Set" +msgstr "सेट करें (_S)" + +#: ../data/gcalctool.ui.h:430 +msgid "_Undo" +msgstr "पूर्ववत् करें (_U)" + +#. View menu +#: ../data/gcalctool.ui.h:432 +msgid "_View" +msgstr "देखें (_V)" + +#. This is accessible name for memory register 0. It is spoken by screen readers such as Orca, to help people who are blind or have low vision. +#: ../data/gcalctool.ui.h:434 +msgid "register 0" +msgstr "रजिस्टर 0" + +#. This is accessible name for memory register 1. It is spoken by screen readers such as Orca, to help people who are blind or have low vision. +#: ../data/gcalctool.ui.h:436 +msgid "register 1" +msgstr "रजिस्टर 1" + +#. This is accessible name for memory register 2. It is spoken by screen readers such as Orca, to help people who are blind or have low vision. +#: ../data/gcalctool.ui.h:438 +msgid "register 2" +msgstr "रजिस्टर 2" + +#. This is accessible name for memory register 3. It is spoken by screen readers such as Orca, to help people who are blind or have low vision. +#: ../data/gcalctool.ui.h:440 +msgid "register 3" +msgstr "रजिस्टर 3" + +#. This is accessible name for memory register 4. It is spoken by screen readers such as Orca, to help people who are blind or have low vision. +#: ../data/gcalctool.ui.h:442 +msgid "register 4" +msgstr "रजिस्टर 4" + +#. This is accessible name for memory register 5. It is spoken by screen readers such as Orca, to help people who are blind or have low vision. +#: ../data/gcalctool.ui.h:444 +msgid "register 5" +msgstr "रजिस्टर 5" + +#. This is accessible name for memory register 6. It is spoken by screen readers such as Orca, to help people who are blind or have low vision. +#: ../data/gcalctool.ui.h:446 +msgid "register 6" +msgstr "रजिस्टर 6" + +#. This is accessible name for memory register 7. It is spoken by screen readers such as Orca, to help people who are blind or have low vision. +#: ../data/gcalctool.ui.h:448 +msgid "register 7" +msgstr "रजिस्टर्स 7" + +#. This is accessible name for memory register 8. It is spoken by screen readers such as Orca, to help people who are blind or have low vision. +#: ../data/gcalctool.ui.h:450 +msgid "register 8" +msgstr "रजिस्टर्स 8" + +#. This is accessible name for memory register 9. It is spoken by screen readers such as Orca, to help people who are blind or have low vision. +#: ../data/gcalctool.ui.h:452 +msgid "register 9" +msgstr "रजिस्टर्स 9" + +#: ../data/gcalctool.ui.h:453 +msgid "x2" +msgstr "x2" + +#. Translators: The window title when in basic mode +#: ../data/gcalctool.desktop.in.h:1 ../src/gtk.c:62 +msgid "Calculator" +msgstr "गणक" + +#: ../data/gcalctool.desktop.in.h:2 +msgid "Perform arithmetic, scientific or financial calculations" +msgstr "अंकगणित, वैज्ञानिक, या वित्तीय गणना करें" + +#: ../data/gcalctool.schemas.in.h:1 +#| msgid "Future value" +msgid "Accuracy value" +msgstr "शुद्धता मान" + +#: ../data/gcalctool.schemas.in.h:2 +msgid "Display Mode" +msgstr "प्रदर्शन मोड" + +#: ../data/gcalctool.schemas.in.h:3 +msgid "" +"Indicates whether any trailing zeroes after the number point should be shown " +"in the display value." +msgstr "बताता है कि कोई पश्चगामी शून्य जिसके बाद संख्या बिंदु को प्रदर्शन मान में दिखाया जाना चाहिए." + +#: ../data/gcalctool.schemas.in.h:4 +msgid "Indicates whether the memory register window is initially displayed." +msgstr "बताता है कि क्या स्मृति रजिस्टर विंडो आरंभिक रूप से दिखाया गया है." + +#: ../data/gcalctool.schemas.in.h:5 +msgid "Indicates whether thousands separators are shown in large numbers." +msgstr "बताता है कि क्या हजार विभाजक को बड़ी संख्या में दिखाया गया है." + +#: ../data/gcalctool.schemas.in.h:6 +#| msgid "Mod" +msgid "Mode" +msgstr "मोड" + +#: ../data/gcalctool.schemas.in.h:7 +#| msgid "Numeric 0" +msgid "Numeric Base" +msgstr "सांख्यिक बेस" + +#: ../data/gcalctool.schemas.in.h:8 +#| msgid "Show memory registers" +msgid "Show Registers" +msgstr "रजिस्टर्स दिखाएँ" + +#: ../data/gcalctool.schemas.in.h:9 +#| msgid "Show T_housands Separator" +msgid "Show Thousands Separator" +msgstr "हजार विभाजक दिखाएँ" + +#: ../data/gcalctool.schemas.in.h:10 +#| msgid "Show _Trailing Zeroes" +msgid "Show Trailing Zeroes" +msgstr "ट्रैलिंग शून्य दिखाएँ" + +#: ../data/gcalctool.schemas.in.h:11 +msgid "" +"The initial calculator mode. Valid values are \"BASIC\", \"FINANCIAL\", " +"\"LOGICAL\", \"SCIENTIFIC\" and \"PROGRAMMING\"" +msgstr "" +"आरंभिक गणक विधि. वैध मान हैं \"BASIC\", \"FINANCIAL\", " +"\"LOGICAL\", \"SCIENTIFIC\" और \"PROGRAMMING\"" + +#: ../data/gcalctool.schemas.in.h:12 +msgid "" +"The initial display mode. Valid values are \"ENG\" (engineering), \"FIX" +"\" (fixed-point) and \"SCI\" (scientific)" +msgstr "" +"आरंभिक प्रदर्शन विधि. वैध मान है \"ENG\" (engineering), \"FIX" +"\" (fixed-point) और \"SCI\" (scientific)" + +#: ../data/gcalctool.schemas.in.h:13 +msgid "" +"The initial trigonometric type. Valid values are \"DEG\" (degrees), \"GRAD" +"\" (gradians) and \"RAD\" (radians)." +msgstr "" +"आरंभिक त्रिकोणमितीय प्रकार. वैध मान हैं \"DEG\" (degrees), \"GRAD" +"\" (gradians) और \"RAD\" (radians)." + +#: ../data/gcalctool.schemas.in.h:14 +msgid "The initial x-coordinate for the window" +msgstr "विंडो के लिए आरंभिक x-निर्देशांक" + +#: ../data/gcalctool.schemas.in.h:15 +msgid "The initial y-coordinate for the window" +msgstr "विंडो के लिए आरंभिक y-निर्देशांक" + +#: ../data/gcalctool.schemas.in.h:16 +msgid "" +"The number of digits displayed after the numeric point. This value must be " +"in the range 0 to 9." +msgstr "किसी सांख्यिक बिंदु के बाद दिखाए गए अंको की संख्या. इस मान को 0 से 9 के परिसर में होना चाहिए." + +#: ../data/gcalctool.schemas.in.h:17 +msgid "The number of pixels to place the window from the left of the screen." +msgstr "स्क्रीन के बायें से विंडो को रखने के लिए पिक्सेल की संख्या." + +#: ../data/gcalctool.schemas.in.h:18 +msgid "The number of pixels to place the window from the top of the screen." +msgstr "स्क्रीन के शीर्ष से विंडो को रखने के लिए पिक्सेल की संख्या." + +#: ../data/gcalctool.schemas.in.h:19 +msgid "The numeric base for input and display." +msgstr "इनपुट और प्रदर्शन के लिए सांख्यिक बेस" + +#: ../data/gcalctool.schemas.in.h:20 +msgid "" +"The size of the words used in bitwise operations. Valid values are 16, 32 " +"and 64." +msgstr "" +"बिटवाइज संक्रिया में प्रयुक्त शब्द का आकार. वैध मान हैं 16, 32 " +"और 64." + +#: ../data/gcalctool.schemas.in.h:21 +#| msgid "Set trigonometric type to degrees" +msgid "Trigonometric type" +msgstr "त्रिकोणमितीय प्रकार" + +#: ../data/gcalctool.schemas.in.h:22 +msgid "Word size" +msgstr "शब्द आकार" + +#: ../src/calctool.c:82 +#, c-format +msgid "" +"Usage:\n" +" %s - Perform mathematical calculations" +msgstr "" +"प्रयोग:\n" +" %s - गणितीय गणना करें" + +#: ../src/calctool.c:90 +#, c-format +msgid "" +"Help Options:\n" +" -v, --version Show release version\n" +" -h, -?, --help Show help options\n" +" --help-all Show all help options\n" +" --help-gtk Show GTK+ options" +msgstr "" +"मदद विकल्प:\n" +" -v, --version Show release version\n" +" -h, -?, --help Show help options\n" +" --help-all Show all help options\n" +" --help-gtk Show GTK+ options" + +#: ../src/calctool.c:101 +#, c-format +msgid "" +"GTK+ Options:\n" +" --class=CLASS Program class as used by the window " +"manager\n" +" --name=NAME Program name as used by the window " +"manager\n" +" --screen=SCREEN X screen to use\n" +" --sync Make X calls synchronous\n" +" --gtk-module=MODULES Load additional GTK+ modules\n" +" --g-fatal-warnings Make all warnings fatal" +msgstr "" +"GTK+ विकल्प:\n" +" --class=CLASS Program class as used by the window " +"manager\n" +" --name=NAME Program name as used by the window " +"manager\n" +" --screen=SCREEN X screen to use\n" +" --sync Make X calls synchronous\n" +" --gtk-module=MODULES Load additional GTK+ modules\n" +" --g-fatal-warnings Make all warnings fatal" + +#: ../src/calctool.c:114 +#, c-format +msgid "" +"Application Options:\n" +" -u, --unittest Perform unittests\n" +" -s, --solve <equation> Solve the given equation" +msgstr "" +"अनुप्रयोग विकल्प:\n" +" -u, --unittest Perform unittests\n" +" -s, --solve <equation> Solve the given equation" + +#. Translators: Error printed to stderr when user uses --solve argument without an equation +#: ../src/calctool.c:150 +#, c-format +msgid "Argument --solve requires an equation to solve" +msgstr "Argument --solve requires an equation to solve" + +#. Translators: Error printed to stderr when user provides an unknown command-line argument +#: ../src/calctool.c:163 +#, c-format +msgid "Unknown argument '%s'" +msgstr "अज्ञात वितर्क '%s'" + +#. Translators: A log message displayed when an invalid accuracy +#. is read from the configuration +#: ../src/calctool.c:191 +#, c-format +msgid "%s: accuracy should be in the range 0-%d\n" +msgstr "%s: सटीक 0-%d के रेजं में होना चाहिये\n" + +#: ../src/display.c:417 +msgid "No undo history" +msgstr "कोई वापस लेना इतिहास नहीं" + +#: ../src/display.c:432 +msgid "No redo steps" +msgstr "कोई रिडू चरण नहीं" + +#. Translators: This message is displayed in the status bar when an +#. invalid user-defined function is executed +#: ../src/functions.c:235 +msgid "Malformed function" +msgstr "विरूपित प्रकार्य" + +#. Translators: This message is displayed in the status bar when a bit +#. shift operation is performed and the display does not contain a number +#: ../src/functions.c:322 +msgid "No sane value to do bitwise shift" +msgstr "बिटवाइज शिफ्ट के लिये कोई सेन मान नहीं" + +#: ../src/functions.c:343 ../src/functions.c:398 +msgid "No sane value to convert" +msgstr "बदलने के लिये कोई सेन मान नहीं" + +#: ../src/functions.c:366 ../src/functions.c:418 +msgid "No sane value to store" +msgstr "भंडारन के लिये कोई सेन मान नहीं" + +#: ../src/functions.c:583 +msgid "Invalid number for the current base" +msgstr "मौजूदा बेस के लिये अवैध संख्या" + +#. Translators: Error displayed to user when they +#. * perform an invalid bitwise operation, e.g. +#. * 1 XOR -1 +#: ../src/functions.c:590 +#| msgid "Invalid bitwise operation parameter(s)" +msgid "Invalid bitwise operation" +msgstr "अवैध बिटवाइज संक्रिया" + +#. Translators: Error displayed to user when they +#. * perform an invalid modulus operation, e.g. +#. * 6 MOD 1.2 +#: ../src/functions.c:597 +#| msgid "Invalid modulus operation parameter(s)" +msgid "Invalid modulus operation" +msgstr "अवैध मॉड्यूल संक्रिया" + +#. Translators; Error displayd to user when they +#. * perform a bitwise operation on numbers greater +#. * than the current word +#: ../src/functions.c:604 +msgid "Overflow. Try a bigger word size" +msgstr "अतिप्रवाह. किसी बड़े शब्द आकार आजमाएँ" + +#. Translators; Error displayd to user when they +#. * an unknown variable is entered +#: ../src/functions.c:610 +msgid "Unknown variable" +msgstr "अज्ञात चर" + +#. Translators; Error displayd to user when they +#. * an unknown function is entered +#: ../src/functions.c:616 +msgid "Unknown function" +msgstr "अज्ञात प्रकार्य" + +#. Translators: Error displayed to user when they +#. * enter an invalid calculation +#: ../src/functions.c:626 +msgid "Malformed expression" +msgstr "विरूपित अभिव्यक्ति" + +#. Translators: The window title when in advanced mode +#: ../src/gtk.c:64 +msgid "Calculator - Advanced" +msgstr "गणक - उन्नत" + +#. Translators: The window title when in financial mode +#: ../src/gtk.c:66 +msgid "Calculator - Financial" +msgstr "गणक - वित्तीय" + +#. Translators: The window title when in scientific mode +#: ../src/gtk.c:68 +msgid "Calculator - Scientific" +msgstr "गणक - वैज्ञानिक" + +#. Translators: The window title when in programming mode +#: ../src/gtk.c:70 +msgid "Calculator - Programming" +msgstr "गणक - प्रोग्रामिंग" + +#. Translators: The window title when in basic mode. %s is replaced with the hostname. +#: ../src/gtk.c:76 +#, c-format +msgid "Calculator [%s]" +msgstr "गणक [%s]" + +#. Translators: The window title when in advanced mode. %s is replaced with the hostname. +#: ../src/gtk.c:78 +#, c-format +msgid "Calculator [%s] - Advanced" +msgstr "गणक [%s] - उन्नत" + +#. Translators: The window title when in financial mode. %s is replaced with the hostname. +#: ../src/gtk.c:80 +#, c-format +msgid "Calculator [%s] - Financial" +msgstr "गणक [%s] - Financial" + +#. Translators: The window title when in scientific mode. %s is replaced with the hostname. +#: ../src/gtk.c:82 +#, c-format +msgid "Calculator [%s] - Scientific" +msgstr "गणक [%s] - वैज्ञानिक" + +#. Translators: The window title when in programming mode. %s is replaced with the hostname. +#: ../src/gtk.c:84 +#, c-format +msgid "Calculator [%s] - Programming" +msgstr "गणक [%s] - प्रोग्रामिंग" + +#. Translators: Title of the error dialog when unable to load the UI files +#: ../src/gtk.c:572 +msgid "Error loading user interface" +msgstr "उपयोक्ता अंतरफलक लोड में त्रुटि" + +#. Translators: Description in UI error dialog when unable to load the UI files. %s is replaced with the error message provided by GTK+ +#: ../src/gtk.c:575 +#, c-format +#| msgid "" +#| "The user interface file %s is missing or unable to be loaded. Please " +#| "check your installation." +msgid "" +"A required file is missing or damaged, please check your installation.\n" +"\n" +"%s" +msgstr "" +"जरूरी फ़ाइल अनुपस्थित या क्षतिग्रस्त है, कृपया अपना संस्थापन जाँचें.\n" +"\n" +"%s" + +#. Translators: Accuracy Popup: Menu item to show the accuracy dialog. %d is replaced with the current accuracy. +#: ../src/gtk.c:672 +#, c-format +msgid "_Other (%d) ..." +msgstr "अन्य (%d) ..." + +#. Translators: Tooltip for accuracy button +#: ../src/gtk.c:678 +#, c-format +msgid "Set accuracy from 0 to %d numeric place. [A]" +msgid_plural "Set accuracy from 0 to %d numeric places. [A]" +msgstr[0] "0 से %d अंक स्थान तक शुद्धता सेट करें. [A]" +msgstr[1] "0 से %d अंक स्थानों तक शुद्धता सेट करें. [A]" + +#. Translators: The sine button +#: ../src/gtk.c:703 +#| msgid "Sin" +msgid "sin" +msgstr "sin" + +#. Translators: The inverse sine button +#: ../src/gtk.c:705 +#| msgid "Sin<sup>-1</sup>" +msgid "sin<sup>−1</sup>" +msgstr "sin<sup>−1</sup>" + +#. Translators: The hyperbolic sine button +#: ../src/gtk.c:707 +#| msgid "Sinh" +msgid "sinh" +msgstr "sinh" + +#. Translators: The inverse hyperbolic sine button +#: ../src/gtk.c:709 +#| msgid "Sinh<sup>-1</sup>" +msgid "sinh<sup>−1</sup>" +msgstr "sinh<sup>−1</sup>" + +#. Translators: The sine tooltip +#: ../src/gtk.c:712 +msgid "Sine [k]" +msgstr "साइन [k]" + +#. Translators: The inverse sine tooltip +#: ../src/gtk.c:714 +msgid "Inverse Sine [K]" +msgstr "उलटा साइन [K]" + +#. Translators: The hyperbolic sine tooltip +#: ../src/gtk.c:716 +msgid "Hyperbolic Sine [k]" +msgstr "परावलीय साइन [k]" + +#. Translators: The hyperbolic inverse sine tooltip +#: ../src/gtk.c:718 +msgid "Hyperbolic Inverse Sine [K]" +msgstr "परावलीय उलटा साइन [K]" + +#. Translators: The cosine button +#: ../src/gtk.c:722 +#| msgid "Cos" +msgid "cos" +msgstr "cos" + +#. Translators: The inverse cosine button +#: ../src/gtk.c:724 +#| msgid "Cos<sup>-1</sup>" +msgid "cos<sup>−1</sup>" +msgstr "cos<sup>−1</sup>" + +#. Translators: The hyperbolic cosine button +#: ../src/gtk.c:726 +#| msgid "Cosh" +msgid "cosh" +msgstr "cosh" + +#. Translators: The inverse hyperbolic cosine button +#: ../src/gtk.c:728 +#| msgid "Cosh<sup>-1</sup>" +msgid "cosh<sup>−1</sup>" +msgstr "cosh<sup>−1</sup>" + +#. Translators: The cosine tooltip +#: ../src/gtk.c:731 +msgid "Cosine [j]" +msgstr "कोसाइन [j]" + +#. Translators: The inverse cosine tooltip +#: ../src/gtk.c:733 +msgid "Inverse Cosine [J]" +msgstr "विलोम कोसाइन [J]" + +#. Translators: The hyperbolic cosine tooltip +#: ../src/gtk.c:735 +msgid "Hyperbolic Cosine [j]" +msgstr "परावलीय कोसाइन [j]" + +#. Translators: The hyperbolic inverse cosine tooltip +#: ../src/gtk.c:737 +msgid "Hyperbolic Inverse Cosine [J]" +msgstr "परावलीय विलोम कोसाइन [J]" + +#. Translators: The tangent button +#: ../src/gtk.c:741 +#| msgid "Tan" +msgid "tan" +msgstr "tan" + +#. Translators: The inverse tangent button +#: ../src/gtk.c:743 +#| msgid "Tan<sup>-1</sup>" +msgid "tan<sup>−1</sup>" +msgstr "tan<sup>−1</sup>" + +#. Translators: The hyperbolic tangent button +#: ../src/gtk.c:745 +#| msgid "Tanh" +msgid "tanh" +msgstr "tanh" + +#. Translators: The inverse hyperbolic tangent button +#: ../src/gtk.c:747 +#| msgid "Tanh<sup>-1</sup>" +msgid "tanh<sup>−1</sup>" +msgstr "tanh<sup>−1</sup>" + +#. Translators: The tangent tooltip +#: ../src/gtk.c:750 +msgid "Tangent [w]" +msgstr "स्पर्शज्या [w]" + +#. Translators: The inverse tangent tooltip +#: ../src/gtk.c:752 +msgid "Inverse Tangent [W]" +msgstr "विलोम स्पर्शज्या [W]" + +#. Translators: The hyperbolic tangent tooltip +#: ../src/gtk.c:754 +msgid "Hyperbolic Tangent [w]" +msgstr "परावलीय स्पर्शज्या [w]" + +#. Translators: The hyperbolic inverse tangent tooltip +#: ../src/gtk.c:756 +msgid "Hyperbolic Inverse Tangent [W]" +msgstr "परावलीय विलोम स्पर्शज्या [W]" + +#. Translators: The natural logaritm button +#: ../src/gtk.c:761 +#| msgid "Sln" +msgid "ln" +msgstr "ln" + +#. Translators: The e to the power of x button +#: ../src/gtk.c:763 +msgid "e<sup><i>x</i></sup>" +msgstr "e<sup><i>x</i></sup>" + +#. Translators: Tooltip for the natural log button +#: ../src/gtk.c:766 +#| msgid "Natural log [n]" +msgid "Natural logarithm [n]" +msgstr "प्राकृतिक लॉग [n]" + +#. Translators: Tooltip for the e to the power of x button +#: ../src/gtk.c:768 +msgid "e to the power of the displayed value [N]" +msgstr "प्रदर्शित मान के ऊपर e का घात [N]" + +#. Translators: The 10-based logaritm button +#: ../src/gtk.c:773 +#| msgid "Log" +msgid "log" +msgstr "log" + +#. Translators: The 10 to the power of x button +#: ../src/gtk.c:775 +msgid "10<sup><i>x</i></sup>" +msgstr "10<sup><i>x</i></sup>" + +#. Translators: Tooltip for the log base 10 button +#: ../src/gtk.c:778 +#| msgid "Base 10 log [g]" +msgid "Base 10 logarithm [g]" +msgstr "बेस 10 लॉग [g]" + +#. Translators: Tooltip for the 10 to the power of x button +#: ../src/gtk.c:780 +msgid "10 to the power of displayed value [G]" +msgstr "प्रदर्शित मान के ऊपर 10 का घात [G]" + +#. Translators: The 2-based logaritm button +#: ../src/gtk.c:785 +#| msgid "Log<sub>2</sub>" +msgid "log<sub>2</sub>" +msgstr "log<sub>2</sub>" + +#. Translators: The 2 to the power of x button +#: ../src/gtk.c:787 +msgid "2<sup><i>x</i></sup>" +msgstr "2<sup><i>x</i></sup>" + +#. Translators: Tooltip for the log base 2 button +#: ../src/gtk.c:790 +#| msgid "Base 2 log [h]" +msgid "Base 2 logarithm [h]" +msgstr "बेस 2 लॉग [h]" + +#. Translators: Tooltip for the 2 to the power of x button +#: ../src/gtk.c:792 +msgid "2 to the power of the displayed value [H]" +msgstr "2 के ऊपर प्रदर्शित मान घात [H]" + +#. Translators: The x to the power of y button +#: ../src/gtk.c:797 +msgid "x<sup><i>y</i></sup>" +msgstr "x<sup><i>y</i></sup>" + +#. Translators: The x to the power of reciprocal y button +#: ../src/gtk.c:799 +msgid "x<sup>1/<i>y</i></sup>" +msgstr "x<sup>1/<i>y</i></sup>" + +#. Translators: Tooltip for the x to the power of y button +#: ../src/gtk.c:802 +msgid "Raise displayed value to the power of y [o]" +msgstr "y [o] के ऊपर प्रदर्शित मान का घात बढ़ाएँ" + +#. Translators: Tooltip for the x to the power of reciprocal y button +#: ../src/gtk.c:804 +msgid "Raise displayed value to the power of reciprocal y [O]" +msgstr "Raise displayed value to the power of reciprocal y [O]" + +#. Translators: The translator credits. Please translate this with your name(s). +#: ../src/gtk.c:1365 +msgid "translator-credits" +msgstr "राजेश रंजन ([email protected], [email protected])" + +#: ../src/gtk.c:1369 +#| msgid "" +#| "Gcalctool is free software; you can redistribute it and/or modify\n" +#| "it under the terms of the GNU General Public License as published by\n" +#| "the Free Software Foundation; either version 2 of the License, or\n" +#| "(at your option) any later version.\n" +#| "\n" +#| "Gcalctool is distributed in the hope that it will be useful,\n" +#| "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" +#| "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" +#| "GNU General Public License for more details.\n" +#| "\n" +#| "You should have received a copy of the GNU General Public License\n" +#| "along with Gcalctool; if not, write to the Free Software Foundation, " +#| "Inc.,\n" +#| "51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA\n" +msgid "" +"Gcalctool is free software; you can redistribute it and/or modify\n" +"it under the terms of the GNU General Public License as published by\n" +"the Free Software Foundation; either version 2 of the License, or\n" +"(at your option) any later version.\n" +"\n" +"Gcalctool is distributed in the hope that it will be useful,\n" +"but WITHOUT ANY WARRANTY; without even the implied warranty of\n" +"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" +"GNU General Public License for more details.\n" +"\n" +"You should have received a copy of the GNU General Public License\n" +"along with Gcalctool; if not, write to the Free Software Foundation, Inc.,\n" +"51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA" +msgstr "" +"Gcalctool is free software; you can redistribute it and/or modify\n" +"it under the terms of the GNU General Public License as published by\n" +"the Free Software Foundation; either version 2 of the License, or\n" +"(at your option) any later version.\n" +"\n" +"Gcalctool is distributed in the hope that it will be useful,\n" +"but WITHOUT ANY WARRANTY; without even the implied warranty of\n" +"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" +"GNU General Public License for more details.\n" +"\n" +"You should have received a copy of the GNU General Public License\n" +"along with Gcalctool; if not, write to the Free Software Foundation, Inc.,\n" +"51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA" + +#. Translators: Program name in the about dialog +#: ../src/gtk.c:1385 +msgid "Gcalctool" +msgstr "जिकेल्कटूल" + +#. Translators: Copyright notice in the about dialog +#: ../src/gtk.c:1388 +msgid "© 1986-2008 The Gcalctool authors" +msgstr "© 1986-2008 The Gcalctool authors" + +#. Translators: Short description in the about dialog +#: ../src/gtk.c:1391 +msgid "Calculator with financial and scientific modes." +msgstr "वित्त और वैज्ञानिक मोड वाला गणक" + +#: ../src/gtk.c:1549 +msgid "Unable to open help file" +msgstr "मदद फाइल खोलने में त्रुटि" + +#. Translators: R is the short form of register used inter alia in popup menus +#: ../src/gtk.c:1956 +msgid "R" +msgstr "R" + +#. FIXME: WTF? +#: ../src/gtk.c:2319 +msgid "Paste" +msgstr "चिपकाएँ" + +#. Translators: Edit Constants Dialog: Constant number column title +#. Translators: Edit Functions Dialog: Function number column title +#: ../src/gtk.c:2679 ../src/gtk.c:2696 +msgid "No." +msgstr "नहीं" + +#. Translators: Edit Constants Dialog: Constant value column title +#. Translators: Edit Functions Dialog: Function value column title +#: ../src/gtk.c:2681 ../src/gtk.c:2699 +msgid "Value" +msgstr "मान" + +#. Translators: Edit Constants Dialog: Constant description column title +#. Translators: Edit Functions Dialog: Function description column title +#: ../src/gtk.c:2683 ../src/gtk.c:2702 +msgid "Description" +msgstr "वर्णन" + +#. Set default accuracy menu item +#. Translators: Accuracy Popup: Menu item to reset the accuracy to the default value. %d is replaced with the default value. +#: ../src/gtk.c:2826 +#, c-format +msgid "Reset to _Default (%d)" +msgstr "मूलभूत पर सेट करें (_D) (%d)" + +#: ../src/mp.c:1467 +msgid "Negative X and non-integer Y not supported" +msgstr "Negative X गैर पूर्णांक Y समर्थित नहीं है" + +#. Translators: Error displayed when tangent value is undefined +#: ../src/mp-trigonometric.c:281 +msgid "Tangent is infinite" +msgstr "टैंजेंट अनंत है" + +#. Translators: This is the label for the default constant, the number of miles in one kilometer (0.621) +#: ../src/register.c:40 +msgid "Kilometer-to-mile conversion factor" +msgstr "किलोमीटर-से-मील परिवर्तन फ़ैक्टर" + +#. Translators: This is the label for the default constant, the square root of 2 (1.41421) +#: ../src/register.c:42 +msgid "square root of 2" +msgstr "2 का वर्गमूल" + +#. Translators: This is the label for the default constant, Euler's number (2.71828) +#: ../src/register.c:44 +msgid "Euler's Number (e)" +msgstr "इयुलर संख्या (e)" + +#. Translators: This is the label for the default constant, π (3.14159) +#: ../src/register.c:46 +msgid "π" +msgstr "π" + +#. Translators: This is the label for the default constant, the number of inches in a centimeter (0.39370) +#: ../src/register.c:48 +msgid "Centimeter-to-inch conversion factor" +msgstr "सेंटीमीटर-से-इंच परिवर्तन फ़ैक्टर" + +#. Translators: This is the label for the default constant, the number of degrees in a radian (57.2958) +#: ../src/register.c:50 +msgid "degrees in a radian" +msgstr "रेडिय्न में डिग्री" + +#. Translators: This is the label for the default constant, 2 to the power of 20 (1048576) +#: ../src/register.c:52 +msgid "2 ^ 20" +msgstr "2 ^ 20" + +#. Translators: This is the label for the default constant, the number of ounces in one gram (0.0353) +#: ../src/register.c:54 +msgid "Gram-to-ounce conversion factor" +msgstr "ग्राम-से-औंस परिवर्तन फ़ैक्टर" + +#. Translators: This is the label for the default constant, the number of British Thermal Units in one Kilojoule (0.948) +#: ../src/register.c:56 +msgid "Kilojoule-to-British-thermal-unit conversion factor" +msgstr "किलोज़ूल-से-ब्रिटिश-थर्मल-यूनिट परिवर्तन फ़ैक्टर" + +#. Translators: This is the label for the default constant, the number of cubic inches in one cubic centimeter (0.0610) +#: ../src/register.c:58 +msgid "Cubic-centimeter-to-cubic-inch conversion factor" +msgstr "घन-सेंटीमीटर-से-घन-इंच परिवर्तन फ़ैक्टर " + |