path: root/help/zh_HK/zh_HK.po

msgid ""
msgstr ""
"Project-Id-Version: mate-calc-help master\n"
"POT-Creation-Date: 2011-06-23 21:02+0000\n"
"PO-Revision-Date: 2011-06-24 20:00+0800\n"
"Last-Translator: Pin-hsien Li <pspeter9931@gmail.com>\n"
"Language-Team: Chinese (Hong Kong) <community@linuxhall.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: C/variables.page:9(title)
msgid "Variables"
msgstr "變數"

#: C/variables.page:11(p)
msgid ""
"To assign a value to a variable use the = symbol or choose the variable to "
"assign to with the <gui>x</gui> button in <link xref=\"mouse\">advanced "
"mode</link>. A variable name must only contain upper or lower characters."
msgstr "要將一個值指定為變數，使用「=」符號，或者用 <link xref=\"mouse\">進階模式</link> 下的 <gui>x</gui> 按鈕來選擇欲指定的變數。變數名稱只能包含大小寫字母。"

#: C/variables.page:16(p)
msgid "x=5"
msgstr "x=5"

#: C/variables.page:19(p)
msgid "value=82"
msgstr "value=82"

#: C/variables.page:23(p)
msgid ""
"Variables can be used in any equation and are substituted for their assigned "
"value. Variables can be inserted using the <gui>x</gui> button."
msgstr "變數可以在任何方程式下使用，替代指定給它們的值。插入變數可以使用 <gui>x</gui> 按鈕。"

#: C/variables.page:28(p)
msgid "6x+3"
msgstr "6x+3"

#: C/variables.page:31(p)
msgid "xy−3x+7y−21"
msgstr "xy-3x+7y-21"

#: C/variables.page:35(p)
msgid "The following variables are always defined."
msgstr "下面是預先定義好的變數。"

#: C/variables.page:40(p)
msgid "ans"
msgstr "ans"

#: C/variables.page:41(p)
msgid "Result of previous calculation"
msgstr "上次的計算結果"

#: C/variables.page:44(p)
msgid "e"
msgstr "e"

#: C/variables.page:45(link)
msgid "Euler's Number"
msgstr "歐拉數"

#: C/variables.page:48(p) C/keyboard.page:35(p)
msgid "π"
msgstr "π"

#: C/variables.page:49(link)
msgid "Pi"
msgstr "Pi (圓周率)"

#: C/variables.page:52(p)
msgid "rand"
msgstr "rand"

#: C/variables.page:53(p)
msgid "Random value in the range [0,1] (changes on each read)"
msgstr "範圍 [0,1] 內的任意值 (在每次讀取時改變)"

#: C/trigonometry.page:9(title)
msgid "Trigonometry"
msgstr "三角函數"

#: C/trigonometry.page:11(p)
msgid ""
"Trigonometry can be performed using the sin, cos, and tan <link xref="
"\"function\">function</link>."
msgstr "三角函數運算可以使用 sin、cos，以及 tan <link xref=\"function\">函數</link>。"

#: C/trigonometry.page:15(p)
msgid "sin 45"
msgstr "sin 45"

#: C/trigonometry.page:19(p)
msgid ""
"The angle units used can be changed from the <guiseq><gui>Calculator</"
"gui><gui>Preferences</gui></guiseq> menu. Trigonometry buttons are visible "
"when in <link xref=\"mouse\">scientific mode</link>."
msgstr "角的單位可在 <guiseq><gui>計數機</gui><gui>偏好設定</gui></guiseq> 選單內更改。<link xref=\"mouse\">科學模式</link> 下有三角函數按鈕。"

#: C/trigonometry.page:23(p)
msgid ""
"Hyperbolic functions are available by adding \"h\" to the end of a function."
msgstr "在函數尾端加上「h」後，便可使用雙曲函數。"

#: C/trigonometry.page:27(p)
msgid "sinh 0.34"
msgstr "sinh 0.34"

#: C/trigonometry.page:31(p)
msgid ""
"Inverse functions are entered either using the inverse symbol ⁻¹ "
"(<keyseq><key>Ctrl</key><key>I</key></keyseq>) or the \"a\" form of the "
"function. The following two equations are equivalent."
msgstr "要輸入反函數，可以使用反函數符號「⁻¹」(<keyseq><key>Ctrl</key><key>I</key></keyseq>)，或是在函數前加上「a」。下面的兩個方程式是相同的。"

#: C/trigonometry.page:36(p)
msgid "sin⁻¹ 0.5"
msgstr "sin⁻¹ 0.5"

#: C/trigonometry.page:39(p)
msgid "asin 0.5"
msgstr "asin 0.5"

#: C/trigonometry.page:43(p)
msgid ""
"To enter <link xref=\"variable\">π</link> with the keyboard use "
"<keyseq><key>Ctrl</key><key>P</key></keyseq>."
msgstr "若要用鍵盤輸入 <link xref=\"variable\">π</link>，使用 <keyseq><key>Ctrl</key><key>P</key></keyseq>。"

#. Place this at the end of the section
#: C/superscript.page:7(title)
msgid "_"
msgstr "_"

#: C/superscript.page:11(title)
msgid "Superscript and Subscript"
msgstr "上標和下標"

#: C/superscript.page:13(p)
msgid ""
"Some equations may require numbers to be entered in superscript or subscript "
"form. e.g."
msgstr "有些方程式可能需要輸入以上、下標型式顯示的數字。例如："

#: C/superscript.page:17(p)
msgid "x³+2x²−5"
msgstr "x³+2x²−5"

#: C/superscript.page:21(p)
msgid ""
"To enter superscript numbers with the mouse select the number mode using the "
"the <gui>↑n</gui> and <gui>↓n</gui> buttons. When one of these modes is "
"active clicking the number buttons will enter numbers in superscript or "
"subscript. To return to normal number mode click the active button."
msgstr "若要使用滑鼠輸入上標數，按下 <gui>↑n</gui> 以及 <gui>↓n</gui> 按鈕選擇數字模式。當其中一個模式啟動之後，點擊數字按鈕將會輸入上標或下標型式的數字。若要回到正常的數字模式，點選被啟動的按鈕。"

#: C/superscript.page:26(p)
msgid ""
"To enter superscript numbers with the keyboard hold down <key>Ctrl</key> "
"while entering the number. Hold <key>Alt</key> for subscript."
msgstr "若要使用鍵盤輸入上標數，在輸入數字的時候按住 <key>Ctrl</key> 鍵。下標數則按住 <key>Alt</key> 鍵。"

#: C/superscript.page:30(p)
msgid ""
"The number mode returns to normal when entering the next non-number "
"character (e.g. +)."
msgstr "在輸入非數字的字符後 (如「+」)，數字模式會回復正常。"

#: C/scientific.page:9(title)
msgid "Scientific Notation"
msgstr "科學記號"

#: C/scientific.page:11(p)
msgid ""
"To enter numbers in scientific format use the <gui>×10x</gui> button "
"(<keyseq><key>Ctrl</key><key>E</key></keyseq>). The <link xref=\"superscript"
"\">number mode</link> automatically changes to superscript. To enter "
"2×10¹⁰⁰, start by entering the mantissa (2):"
msgstr "若要輸入以科學記號表示的數字，使用 <gui>×10x</gui> 按鈕 (<keyseq><key>Ctrl</key><key>E</key></keyseq>)。<link xref=\"superscript\">數字模式</link> 會自動變成上標型式。若要輸入「2×10¹⁰⁰」，從尾數 (2) 開始輸入："

#: C/scientific.page:17(p)
msgid "2"
msgstr "2"

#: C/scientific.page:21(p)
msgid ""
"Then press the scientific notation button (or press <keyseq><key>Ctrl</"
"key><key>E</key></keyseq>):"
msgstr "然後按下科學記號按鈕 (或是按下 <keyseq><key>Ctrl</key><key>E</key></keyseq>)："

#: C/scientific.page:25(p)
msgid "2×10"
msgstr "2×10"

#: C/scientific.page:29(p)
msgid "Then enter the exponent (100):"
msgstr "接着輸入指數 (100)："

#: C/scientific.page:33(p)
msgid "2×10¹⁰⁰"
msgstr "2×10¹⁰⁰"

#: C/scientific.page:37(p)
msgid ""
"To show results in scientific form change the <link xref=\"number-display"
"\">result format</link>."
msgstr "若要以科學記號顯示結果，請改變 <link xref=\"number-display\">結果格式</link>。"

#: C/power.page:9(title)
msgid "Powers and Roots"
msgstr "冪與方根"

#: C/power.page:11(p)
msgid ""
"Powers are entered by putting a <link xref=\"superscript\">superscript "
"number</link> after the value."
msgstr "要輸入冪，在值後放入 <link xref=\"superscript\">上標數字</link>。"

#: C/power.page:15(p)
msgid "5²"
msgstr "5²"

#: C/power.page:19(p)
msgid ""
"The inverse of a number can be entered using the inverse symbol ⁻¹ "
"(<keyseq><key>Ctrl</key><key>I</key></keyseq>)."
msgstr "要輸入一個數字的倒數，可以使用倒數符號「⁻¹」(<keyseq><key>Ctrl</key><key>I</key></keyseq>) 。"

#: C/power.page:23(p)
msgid "3⁻¹"
msgstr "3⁻¹"

#: C/power.page:27(p)
msgid ""
"Powers can also be calculated using the ^ symbol. This allows the power to "
"be an equation."
msgstr "冪運算也可以使用「^」符號。這會使冪成為一個方程式。"

#: C/power.page:32(p)
msgid "5^(6−2)"
msgstr "5^(6−2)"

#: C/power.page:36(p)
msgid ""
"If your keyboard does not have a <key>^</key> key you can use <key>*</key> "
"twice."
msgstr "如果你的鍵盤上沒有 <key>^</key> 鍵的話，也可以按兩次 <key>*</key> 鍵。"

#: C/power.page:39(p)
msgid ""
"Square roots can be calculated using the symbol (<keyseq><key>Ctrl</"
"key><key>R</key></keyseq>)."
msgstr "要計算平方根，使用符號「√」(<keyseq><key>Ctrl</key><key>R</key></keyseq>) 。"

#: C/power.page:43(p)
msgid "√2"
msgstr "√2"

#: C/power.page:47(p)
msgid ""
"n-th roots can be calculated by putting a <link xref=\"superscript"
"\">subscript number</link> before the root sign."
msgstr "要計算 n 次方根，可在根號符號前放入 <link xref=\"superscript\">下標數字</link> 。"

#: C/power.page:51(p)
msgid "₃√2"
msgstr "₃√2"

#: C/percentage.page:9(title)
msgid "Percentages"
msgstr "百分比"

#: C/percentage.page:11(p)
msgid "Percentages are calculated using the % symbol."
msgstr "計算百分比時會使用「%」符號。"

#: C/percentage.page:14(p)
msgid ""
"When added or subtracted the percentage symbol resolves to one percent of "
"the value being added or subtracted from. The following equation calculates "
"the price of a $140 item with 15% tax (140 + (15÷100)×140)."
msgstr "當使用加減時，代表加減該值的百分比。下面的方程式計算了 $140 的物品加上 15% 稅率的價錢 (140 + (15÷100)×140)。"

#: C/percentage.page:19(p)
msgid "140+15%"
msgstr "140+15%"

#: C/percentage.page:23(p)
msgid ""
"In all other cases the percentage symbol resolves to a fraction out of 100. "
"The following equation calculates one quarter of 80 apples ((25÷100)×80)."
msgstr "在其他情況下，百分比符號代表分母為 100 的分數 (除以 100)。下列的方程式計算了 80 顆蘋果的四分之一 ((25÷100)×80)。"

#: C/percentage.page:28(p)
msgid "25%×80"
msgstr "25%×80"

#: C/number-display.page:9(title)
msgid "Result Format"
msgstr "結果格式"

#: C/number-display.page:11(p)
msgid ""
"The format used to display results can be changed from the "
"<guiseq><gui>Calculator</gui><gui>Preferences</gui></guiseq> menu."
msgstr "顯示結果的格式可從 <guiseq><gui>計數機</gui><gui>偏好設定</gui></guiseq> 選單內更改。"

#: C/number-display.page:16(p)
msgid "Decimal"
msgstr "十進制"

#: C/number-display.page:17(p)
msgid "Results are displayed as decimal numbers"
msgstr "結果會以十進位數字顯示"

#: C/number-display.page:20(p) C/mouse.page:25(p)
msgid "Scientific"
msgstr "科學"

#: C/number-display.page:21(p)
msgid ""
"Results are displayed in <link xref=\"scientific\">scientific notation</link>"
msgstr "結果會以 <link xref=\"scientific\">科學記號</link> 顯示"

#: C/number-display.page:24(p)
msgid "Engineering"
msgstr "工程"

#: C/number-display.page:25(p)
msgid ""
"Results are displayed in scientific notation except the exponent is always a "
"multiple of three"
msgstr "結果會以科學記號顯示，指數永遠是 3 的倍數"

#: C/number-display.page:28(p)
msgid "Binary"
msgstr "二進制"

#: C/number-display.page:29(p)
msgid "Results are displayed as <link xref=\"base\">binary numbers</link>"
msgstr "結果會以 <link xref=\"base\">二進位數字</link> 顯示"

#: C/number-display.page:32(p)
msgid "Octal"
msgstr "八進制"

#: C/number-display.page:33(p)
msgid "Results are displayed as <link xref=\"base\">octal numbers</link>"
msgstr "結果會以 <link xref=\"base\">八進位數字</link> 顯示"

#: C/number-display.page:36(p)
msgid "Hexadecimal"
msgstr "十六進制"

#: C/number-display.page:37(p)
msgid "Results are displayed as <link xref=\"base\">hexadecimal numbers</link>"
msgstr "結果會以 <link xref=\"base\">十六進位數字</link> 顯示"

#: C/number-display.page:40(p)
msgid ""
"The number of decimal places, if trailing zeroes and if thousands separators "
"are shown can also be configured."
msgstr "十進位制的數字也可以設定：是否小數點後面補零、是否顯示千分位分隔。"

#: C/mouse.page:9(title)
msgid "Using the Mouse"
msgstr "使用滑鼠"

#: C/mouse.page:11(p)
msgid ""
"All equations can be entered using the mouse. To access all buttons there "
"are a number of modes that can be selected from the <gui>View</gui> menu."
msgstr "所有方程式可從滑鼠輸入。若要存取所有按鈕，<gui>檢視</gui>選單內有各種模式可供選擇。"

#: C/mouse.page:17(p)
msgid "Basic"
msgstr "基本"

#: C/mouse.page:18(p)
msgid ""
"Provides buttons suitable for <link xref=\"equation\">basic equations</link>"
msgstr "提供適合 <link xref=\"equation\">基本方程</link> 的按鈕"

#: C/mouse.page:21(p)
msgid "Advanced"
msgstr "進階"

#: C/mouse.page:22(p)
msgid "Provides buttons suitable for advanced mathematics"
msgstr "提供適合進階數學的按鈕"

#: C/mouse.page:26(p)
msgid ""
"Provides buttons suitable for <link xref=\"trigonometry\">trigonometry</link>"
msgstr "提供適合 <link xref=\"trigonometry\">三角函數</link> 的按鈕"

#: C/mouse.page:29(p)
msgid "Financial"
msgstr "財務"

#: C/mouse.page:30(p)
msgid ""
"Provides buttons suitable for <link xref=\"financial\">financial equations</"
"link>"
msgstr "提供適合 <link xref=\"financial\">財務方程</link> 的按鈕"

#: C/mouse.page:33(p)
msgid "Programming"
msgstr "軟件開發"

#: C/mouse.page:34(p)
msgid "Provides buttons suitable for computer programmers"
msgstr "提供適合電腦程式設計師的按鈕"

#: C/modulus.page:9(title)
msgid "Modulus Division"
msgstr "餘數除法"

#: C/modulus.page:11(p)
msgid "Modulus division is performed using the mod operator."
msgstr "計算餘數除法會使用 mod 運算子。"

#: C/modulus.page:15(p)
msgid "9 mod 5"
msgstr "9 mod 5"

#: C/logarithm.page:9(title)
msgid "Logarithms"
msgstr "對數"

#: C/logarithm.page:11(p)
msgid ""
"Logarithms can be calculated using the log <link xref=\"function\">function</"
"link>."
msgstr "計算對數可以使用 log <link xref=\"function\">函數</link> 。"

#: C/logarithm.page:15(p)
msgid "log 100"
msgstr "log 100"

#: C/logarithm.page:19(p)
msgid ""
"To calculate a logarithm in a different base use a <link xref=\"superscript"
"\">subscript number</link> after the function."
msgstr "若要計算使用不同底數的對數，在函數後面使用 <link xref=\"superscript\">下標數字</link>。"

#: C/logarithm.page:23(p)
msgid "log₂ 32"
msgstr "log₂ 32"

#: C/logarithm.page:27(p)
msgid "To calculate a natural logarithm use the ln function."
msgstr "若要計算自然對數，使用 ln 函數。"

#: C/logarithm.page:31(p)
msgid "ln 1.32"
msgstr "ln 1.32"

#: C/logarithm.page:35(p)
msgid ""
"Euler's number can be entered by using the <link xref=\"variable\">variable</"
"link> e."
msgstr "要輸入歐拉數，使用 <link xref=\"variable\">變數</link> e。"

#: C/logarithm.page:39(p)
msgid "e^1.32"
msgstr "e^1.32"

#: C/keyboard.page:9(title)
msgid "Using the Keyboard"
msgstr "使用鍵盤"

#: C/keyboard.page:11(p)
msgid "All mathematical equations can be entered using the keyboard."
msgstr "所有數學方程式都可以從鍵盤輸入。"

#: C/keyboard.page:14(p)
msgid ""
"The following key combinations can be used to enter keys that may not be "
"available on your keyboard."
msgstr "下面的組合鍵可供輸入那些你的鍵盤上可能沒有的按鍵。"

#: C/keyboard.page:19(p)
msgid "×"
msgstr "×"

#: C/keyboard.page:20(key)
msgid "*"
msgstr "*"

#: C/keyboard.page:23(p)
msgid "÷"
msgstr "÷"

#: C/keyboard.page:24(key)
msgid "/"
msgstr "/"

#: C/keyboard.page:27(p)
msgid "^"
msgstr "^"

#: C/keyboard.page:28(p)
msgid "<key>*</key> twice"
msgstr "<key>*</key> 兩次"

#: C/keyboard.page:31(p)
msgid "√"
msgstr "√"

#: C/keyboard.page:32(key) C/keyboard.page:36(key)
msgid "Ctrl"
msgstr "Ctrl"

#: C/keyboard.page:32(key)
msgid "R"
msgstr "R"

#: C/keyboard.page:36(key)
msgid "P"
msgstr "P"

#: C/keyboard.page:39(p)
msgid ""
"To enter <link xref=\"superscript\">superscript numbers</link> use "
"<keyseq><key>Ctrl</key>number</keyseq>, for subscript use <keyseq><key>Alt</"
"key>number</keyseq>."
msgstr "若要輸入 <link xref=\"superscript\">上標數字</link>，使用 <keyseq><key>Ctrl</key>數字</keyseq>，下標數字則使用 <keyseq><key>Alt</key>數字</keyseq>。"

#: C/index.page:7(name)
msgid "Robert Ancell"
msgstr "Robert Ancell"

#: C/index.page:8(email)
msgid "robert.ancell@gmail.com"
msgstr "robert.ancell@gmail.com"

#: C/index.page:13(title)
msgid "GCalctool Help"
msgstr "GCalctool 計數機說明"

#: C/index.page:16(title)
msgid "User Interface"
msgstr "使用者介面"

#: C/index.page:20(title)
msgid "Equations"
msgstr "方程式"

#: C/index.page:24(title)
msgid "Numbers"
msgstr "數字"

#: C/index.page:28(title)
msgid "Conversions"
msgstr "轉換"

#: C/index.page:32(title)
msgid "Financial Calculations"
msgstr "財務計算"

#: C/functions.page:9(title)
msgid "Functions"
msgstr "函數"

#: C/functions.page:11(p)
msgid ""
"Functions can be used by inserting the name of the function followed by the "
"function argument. If the argument is not a number or <link xref=\"variable"
"\">variable</link> then use parenthesis around the argument."
msgstr "要使用函數，輸入函數的名稱，後面再加上參數。如果參數不是數字或 <link xref=\"variable\">變數</link>，在參數兩旁使用括號。"

#: C/functions.page:16(p)
msgid "sin 30"
msgstr "sin 30"

#: C/functions.page:19(p)
msgid "abs (5−9)"
msgstr "abs (5−9)"

#: C/functions.page:23(p)
msgid "The following functions are defined."
msgstr "下面是預先定義的函數。"

#: C/functions.page:28(p)
msgid "abs"
msgstr "abs"

#: C/functions.page:29(link)
msgid "Absolute Value"
msgstr "絕對值"

#: C/functions.page:32(p)
msgid "cos"
msgstr "cos"

#: C/functions.page:33(link)
msgid "Cosine"
msgstr "餘弦函數"

#: C/functions.page:36(p)
msgid "cosh"
msgstr "cosh"

#: C/functions.page:37(link)
msgid "Hyperbolic Cosine"
msgstr "雙曲餘弦函數"

#: C/functions.page:40(p)
msgid "frac"
msgstr "frac"

#: C/functions.page:41(p)
msgid "Fractional Component"
msgstr "小數部分"

#: C/functions.page:44(p)
msgid "int"
msgstr "int"

#: C/functions.page:45(p)
msgid "Integer Component"
msgstr "整數部分"

#: C/functions.page:48(p)
msgid "ln"
msgstr "ln"

#: C/functions.page:49(link)
msgid "Natural Logarithm"
msgstr "自然對數"

#: C/functions.page:52(p)
msgid "log"
msgstr "log"

#: C/functions.page:53(link)
msgid "Logarithm"
msgstr "對數"

#: C/functions.page:56(p)
msgid "not"
msgstr "not"

#: C/functions.page:57(link)
msgid "Boolean NOT"
msgstr "邏輯 NOT"

#: C/functions.page:60(p)
msgid "ones"
msgstr "ones"

#: C/functions.page:61(p)
msgid "Ones complement"
msgstr "1 的補數"

#: C/functions.page:64(p)
msgid "sin"
msgstr "sin"

#: C/functions.page:65(link)
msgid "Sine"
msgstr "正弦函數"

#: C/functions.page:68(p)
msgid "sinh"
msgstr "sinh"

#: C/functions.page:69(link)
msgid "Hyperbolic Sine"
msgstr "雙曲正弦函數"

#: C/functions.page:72(p)
msgid "sqrt"
msgstr "sqrt"

#: C/functions.page:73(link)
msgid "Square Root"
msgstr "平方根"

#: C/functions.page:76(p)
msgid "tan"
msgstr "tan"

#: C/functions.page:77(link)
msgid "Tangent"
msgstr "正切函數"

#: C/functions.page:80(p)
msgid "tanh"
msgstr "tanh"

#: C/functions.page:81(link)
msgid "Hyperbolic Tangent"
msgstr "雙曲正切函數"

#: C/functions.page:84(p)
msgid "twos"
msgstr "twos"

#: C/functions.page:85(p)
msgid "Twos complement"
msgstr "2 的補數"

#: C/functions.page:88(p)
msgid "<app>GCalctool</app> does not support user-defined functions."
msgstr "<app>GCalctool</app> 不支援使用者自定義的函數。"

#: C/financial.page:9(title)
msgid "Financial Functions"
msgstr "財務函數"

#: C/financial.page:10(p)
msgid "When in financial mode the following buttons are available."
msgstr "下面是財務模式下可以使用的按鈕。"

#: C/financial.page:15(p)
msgid "Ctrm"
msgstr "Ctrm"

#: C/financial.page:16(p)
msgid ""
"Calculate the number of compounding periods necessary to increase an "
"investment of present value to a future value, at a fixed interest rate per "
"compounding period."
msgstr "計算增加現值的投資使其等於未來值所需的複利週期數，每一複利週期使用定期利率。"

#: C/financial.page:19(p)
msgid "Ddb"
msgstr "Ddb"

#: C/financial.page:20(p)
msgid ""
"Calculate the depreciation allowance on an asset for a specified period of "
"time, using the double-declining balance method."
msgstr "計算在指定的期間中某資產的折舊免稅額，使用雙倍餘額遞減法。"

#: C/financial.page:23(p)
msgid "Fv"
msgstr "Fv"

#: C/financial.page:24(p)
msgid ""
"Calculate the future value of an investment based on a series of equal "
"payments at a periodic interest rate over the number of payment periods in "
"the term."
msgstr "根據定期等額付款計算投資的未來值，按照約定付款期數的定期利率。"

#: C/financial.page:27(p)
msgid "Gpm"
msgstr "Gpm"

#: C/financial.page:28(p)
msgid ""
"Calculate the resale price of a product, based on the product cost and the "
"wanted gross profit margin."
msgstr "計算產品的轉售價格，以產品成本與期望的毛利率決定。"

#: C/financial.page:31(p)
msgid "Pmt"
msgstr "Pmt"

#: C/financial.page:32(p)
msgid ""
"Calculate the amount of the periodic payment of a loan, where payments are "
"made at the end of each payment period."
msgstr "計算貸款每期付款的金額，其中付款日期為每一個付款週期的最後一天。"

#: C/financial.page:35(p)
msgid "Pv"
msgstr "Pv"

#: C/financial.page:36(p)
msgid ""
"Calculate the present value of an investment based on a series of equal "
"payments discounted at a periodic interest rate over the number of payment "
"periods in the term."
msgstr "根據定期等額付款計算投資的現值，按照約定付款期數的定期利率下進行折現。"

#: C/financial.page:39(p)
msgid "Rate"
msgstr "Rate"

#: C/financial.page:40(p)
msgid ""
"Calculate the periodic interest necessary to increase an investment to a "
"future value, over the number of compounding periods."
msgstr "計算投資增加到未來值所需的定期利率，按照複利期數。"

#: C/financial.page:43(p)
msgid "Sln"
msgstr "Sln"

#: C/financial.page:44(p)
msgid ""
"Calculate the straight-line depreciation of an asset for one period. The "
"straight-line method of depreciation divides the depreciable cost evenly "
"over the useful life of an asset. The useful life is the number of periods, "
"typically years, over which an asset is depreciated."
msgstr "計算一期間內資產的直線折舊。直線折舊法在資產可用年限內將折舊花費平均分攤。可用年限指資產折舊的期數，典型狀況下為年。"

#: C/financial.page:47(p)
msgid "Syd"
msgstr "Syd"

#: C/financial.page:48(p)
msgid ""
"Calculate the depreciation allowance on an asset for a specified period of "
"time, using the Sum-of-the-Years'-Digits method. This method of depreciation "
"accelerates the rate of depreciation, so that more depreciation expense "
"occurs in earlier periods than in later ones. The useful life is the number "
"of periods, typically years, over which an asset is depreciated."
msgstr "計算在指定的期間中某資產的折舊免稅額，使用年數總和法。這個折舊方式會加速折舊率，所以前期會比後期有更多折舊費用。可用年限是指該資產折舊的週期數 (通常為年)。"

#: C/financial.page:51(p)
msgid "Term"
msgstr "Term"

#: C/financial.page:52(p)
msgid ""
"Calculate the number of payment periods that are necessary during the term "
"of an ordinary annuity, to accumulate a future value, at a periodic interest "
"rate."
msgstr "計算普通年金期間累積至未來值所需的付款期數，按照某一定期利率。"

#: C/financial.page:56(p)
msgid "Financial functions cannot be performed using the keyboard."
msgstr "財務函數無法使用鍵盤進行。"

#: C/factorize.page:9(title)
msgid "Factorization"
msgstr "因數分解"

#: C/factorize.page:11(p)
msgid ""
"You can factorize the number currently displayed by pressing the <gui>fact</"
"gui> button. This button is visible in <link xref=\"mouse\">programming "
"mode</link>."
msgstr "你可以按下 <gui>fact</gui> 按鈕，將目前顯示的數字作因數分解。這個按鈕在 <link xref=\"mouse\">軟件開發模式</link> 裏面。"

#: C/factorial.page:9(title)
msgid "Factorials"
msgstr "階乘"

#: C/factorial.page:11(p)
msgid ""
"Factorials are entered using the ! symbol. To calculate the factorial of 6 "
"enter the following."
msgstr "階乘使用「!」符號來作輸入。若要計算 6 的階乘，輸入如下。"

#: C/factorial.page:16(p)
msgid "6!"
msgstr "6!"

#. Place this at the start of the section
#: C/equation.page:7(title)
msgid "0"
msgstr "0"

#: C/equation.page:11(title)
msgid "Basic Equations"
msgstr "基本方程"

#: C/equation.page:13(p)
msgid ""
"Equations are entered in standard mathematical form. For example to add 7 "
"and 2 enter the following:"
msgstr "方程式以標準的數學模式來作輸入。舉例來說，要將 7 和 2 相加，輸入如下："

#: C/equation.page:18(p)
msgid "7+2"
msgstr "7+2"

#: C/equation.page:22(p)
msgid ""
"To solve, press the <gui>=</gui> button with your mouse or the <key>Enter</"
"key> key on your keyboard."
msgstr "若要得到結果，用你的滑鼠按下 <gui>=</gui> 按鈕，或是用你的鍵盤按下 <key>Enter</key> 鍵。"

#: C/equation.page:25(p)
msgid ""
"Calculations are performed in mathematical order - multiplication and "
"division are performed before addition and subtraction. The following "
"equation solves to 1 (3×2 = 6, 7−6 = 1)."
msgstr "計算會根據數學規則來進行 (先乘除後加減)。下面方程式的解為 1 (3×2 = 6, 7−6 = 1)。"

#: C/equation.page:30(p)
msgid "7−3×2"
msgstr "7−3×2"

#: C/equation.page:34(p)
msgid ""
"To change the order of calculation use parenthesis. The following equation "
"solves to 8 (7−3 = 4, 4×2 = 8)."
msgstr "要更改計算的次序，使用括弧。下面方程式的解為 8 (7−3 = 4, 4×2 = 8)。"

#: C/equation.page:39(p)
msgid "(7−3)×2"
msgstr "(7−3)×2"

#: C/equation.page:43(p)
msgid ""
"To clear the display press the <gui>Clr</gui> button or <key>Escape</key>."
msgstr "若要清除顯示，按下 <gui>Clr</gui> 按鈕或是 <key>Escape</key> 鍵。"

#: C/conv-weight.page:9(title)
msgid "Mass"
msgstr "質量"

#: C/conv-weight.page:11(p)
msgid "To convert between mass use the <em>in</em> operator."
msgstr "若要轉換質量單位，使用 <em>in</em> 運算子。"

#: C/conv-weight.page:15(p)
msgid "1kg in pounds"
msgstr "1kg in pounds"

#: C/conv-weight.page:20(p)
msgid "Mass conversions must be performed using the keyboard."
msgstr "質量轉換必須使用鍵盤進行。"

#: C/conv-time.page:9(title)
msgid "Time"
msgstr "時間"

#: C/conv-time.page:11(p)
msgid "To convert between time use the <em>in</em> operator."
msgstr "若要轉換時間單位，使用 <em>in</em> 運算子。"

#: C/conv-time.page:15(p)
msgid "3 years in hours"
msgstr "3 years in hours"

#: C/conv-time.page:20(p)
msgid "Time conversions must be performed using the keyboard."
msgstr "時間轉換必須使用鍵盤進行。"

#: C/conv-length.page:9(title)
msgid "Length/Area/Volume"
msgstr "長度/面積/體積"

#: C/conv-length.page:11(p)
msgid ""
"To convert between length, area and volume units use the <em>in</em> "
"operator."
msgstr "若要轉換長度、面積與體積單位，使用 <em>in</em> 運算子。"

#: C/conv-length.page:15(p)
msgid "6 meters in inches"
msgstr "6 meters in inches"

#: C/conv-length.page:18(p)
msgid "1 acre in cm²"
msgstr "1 acre in cm²"

#: C/conv-length.page:21(p)
msgid "1 pint in mL"
msgstr "1 pint in mL"

#: C/conv-length.page:26(p)
msgid "Length/Area/Volume conversions must be performed using the keyboard."
msgstr "長度/面積/體積轉換必須使用鍵盤進行。"

#: C/conv-currency.page:9(title)
msgid "Currency"
msgstr "貨幣"

#: C/conv-currency.page:11(p)
msgid ""
"To convert currencies, enter the <link xref=\"financial\">financial mode</"
"link>, and use the currency controls."
msgstr "若要轉換貨幣單位，進入 <link xref=\"financial\">財務模式</link> 並使用貨幣控制。"

#: C/conv-currency.page:14(p)
msgid ""
"You can also convert currencies using the keyboard and the <em>in</em> "
"operator."
msgstr "你也可以使用鍵盤和 <em>in</em> 運算子來轉換貨幣單位。"

#: C/conv-currency.page:18(p)
msgid "13.65 USD in GBP"
msgstr "13.65 USD in GBP"

#: C/conv-currency.page:23(p)
msgid ""
"Currency information is approximate and should not be used for making "
"financial decisions."
msgstr "貨幣資訊只是一個大概值，不應該用於財務決策。"

#: C/conv-character.page:9(title)
msgid "Character Codes"
msgstr "字符碼"

#: C/conv-character.page:11(p)
msgid ""
"When in <link xref=\"mouse\">programming mode</link> the <gui>á</gui> button "
"opens a dialog to convert characters to character codes."
msgstr "在 <link xref=\"mouse\">軟件開發模式</link> 下，<gui>á</gui> 按鈕會開啟對話框，將字符轉換成字符碼。"

#: C/conv-character.page:15(p)
msgid "Characters cannot be converted using the keyboard."
msgstr "字符無法使用鍵盤轉換。"

#: C/conv-base.page:9(title) C/base.page:9(title)
msgid "Number Bases"
msgstr "數基"

#: C/conv-base.page:11(p)
msgid ""
"To convert between number bases enter a number (or solve an equation) and "
"change the <link xref=\"number-display\">result format</link> from the "
"<guiseq><gui>Calculator</gui><gui>Preferences</gui></guiseq> menu."
msgstr "若要轉換數基 (進位制)，輸入一個數字 (或是為一個方程式求解)，並從 <guiseq><gui>計數機</gui><gui>偏好設定</gui></guiseq> 選單改變 <link xref=\"number-display\">結果格式</link>。"

#: C/complex.page:9(title)
msgid "Complex Numbers"
msgstr "複數"

#: C/complex.page:11(p)
msgid "Complex numbers are not supported in <app>GCalctool</app>."
msgstr "<app>GCalctool</app> 並不支援複數。"

#: C/boolean.page:9(title)
msgid "Boolean Algebra"
msgstr "邏輯代數"

#: C/boolean.page:11(p)
msgid "Boolean algebra can be calculated using the AND, OR and XOR operators."
msgstr "邏輯代數 (邏輯代數) 可以使用 AND、OR、XOR 運算子來作計算。"

#: C/boolean.page:15(p)
msgid "010011₂ AND 110101₂"
msgstr "010011₂ AND 110101₂"

#: C/boolean.page:19(p)
msgid ""
"Buttons for these symbols are available in <link xref=\"mouse\">programming "
"mode</link>."
msgstr "這些符號按鈕可以從 <link xref=\"mouse\">軟件開發模式</link> 中選取。"

#: C/boolean.page:22(p)
msgid ""
"The NOT <link xref=\"function\">function</link> inverts the bits in a "
"number. The word size is set from the <guiseq><gui>Calculator</"
"gui><gui>Preferences</gui></guiseq> menu."
msgstr "NOT <link xref=\"function\">函數</link> 會將數字內的位元倒置。文字大小是在 <guiseq><gui>計數機</gui><gui>偏好設定</gui></guiseq> 選單內設置。"

#: C/boolean.page:27(p)
msgid "NOT 010011₂"
msgstr "NOT 010011₂"

#: C/base.page:11(p)
msgid ""
"To enter numbers in a particular number base use <link xref=\"superscript"
"\">subscript numbers</link>. The following numbers are equivalent."
msgstr "若要輸入使用特定數基 (進位制) 的數字，使用 <link xref=\"superscript\">下標數字</link>。下面的數字都是一樣的。"

#: C/base.page:16(p)
msgid "1001011₂"
msgstr "1001011₂"

#: C/base.page:19(p)
msgid "113₈"
msgstr "113₈"

#: C/base.page:22(p)
msgid "75"
msgstr "75"

#: C/base.page:25(p)
msgid "4B₁₆"
msgstr "4B₁₆"

#: C/base.page:29(p)
msgid ""
"When in <link xref=\"mouse\">programming mode</link> there are buttons for "
"binary (<keyseq><key>Ctrl</key><key>B</key></keyseq>), octal "
"(<keyseq><key>Ctrl</key><key>O</key></keyseq>) and hexadecimal "
"(<keyseq><key>Ctrl</key><key>H</key></keyseq>)."
msgstr "在 <link xref=\"mouse\">軟件開發模式</link> 下有二進制 (<keyseq><key>Ctrl</key><key>B</key></keyseq>)、八進制 (<keyseq><key>Ctrl</key><key>O</key></keyseq>) 以及十六進制  (<keyseq><key>Ctrl</key><key>H</key></keyseq>) 的按鈕。"

#: C/base.page:32(p)
msgid ""
"To set the base that results are shown in change the <link xref=\"number-"
"display\">result format</link>."
msgstr "若要改變結果的進制顯示，請改變 <link xref=\"number-display\">結果格式</link>。"

#: C/base.page:35(p)
msgid ""
"To change the base of the current result use a base button or "
"<keyseq><key>Ctrl</key><key>D</key></keyseq> to show in decimal form."
msgstr "若要改變目前結果的數基 (進位制)，使用進位制按鈕或是 <keyseq><key>Ctrl</key><key>D</key></keyseq> 以十進制格式顯示。"

#: C/absolute.page:9(title)
msgid "Absolute Values"
msgstr "絕對值"

#: C/absolute.page:11(p)
msgid ""
"Absolute values are calculated using the | symbol or abs <link xref="
"\"function\">function</link>."
msgstr "計算絕對值可以使用「|」符號或是 abs <link xref=\"function\">函數</link>。"

#: C/absolute.page:15(p)
msgid "|−1|"
msgstr "|−1|"

#: C/absolute.page:18(p)
msgid "abs (−1)"
msgstr "abs (−1)"

#. Put one translator per line, in the form of NAME <EMAIL>, YEAR1, YEAR2
#: C/index.page:0(None)
msgid "translator-credits"
msgstr ""
"如對翻譯有任何意見，請送一封電子郵件給\n"
"以下地址，MATE 翻譯隊伍會盡快回覆你：\n"
"zh-l10n@lists.linux.org.tw\n"
"\n"
"Pin-hsien Li  <pspeter9931@gmail.com>, 2011."

#~ msgid "<application>mate-calc</application> Manual V2.5"
#~ msgstr "<application>Calculator</application> 手冊 V2.5"

#~ msgid "2003"
#~ msgstr "2003 年"

#~ msgid "MATE Documentation Project"
#~ msgstr "MATE 文件專案"

#~ msgid "MATE Documentation Team"
#~ msgstr "MATE 文件小組"

#~ msgid "mate-calc Manual V2.5"
#~ msgstr "計算機手冊 V2.5"

#~ msgid "Sun MATE Documentation Team"
#~ msgstr "Sun MATE 文件小組"

#~ msgid "mate-calc Manual V2.4"
#~ msgstr "mate-calc 手冊 V2.4"

#~ msgid "June 2003"
#~ msgstr "2003 年 6 月"

#~ msgid "mate-calc Manual V2.3"
#~ msgstr "mate-calc 手冊 V2.3"

#~ msgid "April 2003"
#~ msgstr "2003 年 4 月"

#~ msgid "mate-calc Manual V2.2"
#~ msgstr "mate-calc 手冊 V2.2"

#~ msgid "mate-calc Manual V2.1"
#~ msgstr "mate-calc 手冊 V2.1"

#~ msgid "March 2003"
#~ msgstr "2003 年 3 月"

#~ msgid "mate-calc Manual V2.0"
#~ msgstr "mate-calc 手冊 V2.0"

#~ msgid ""
#~ "This manual describes version 4.2.100 of <application>mate-calc</"
#~ "application>."
#~ msgstr ""
#~ "本手冊的內容是說明 4.2.103 版的 <application>Calculator</application>。"

#~ msgid "Feedback"
#~ msgstr "回饋"

#~ msgid ""
#~ "To report a bug or make a suggestion regarding the "
#~ "<application>mate-calc</application> application or this manual, follow "
#~ "the directions in the <ulink url=\"help:mate-feedback\" type=\"help"
#~ "\">MATE Feedback Page</ulink>."
#~ msgstr ""
#~ "關於本 <application>Calculator</application> 應用程式或 手冊，如果要報告錯"
#~ "誤或提出建議，請遵照 <ulink url=\"help:mate-feedback\" type=\"help"
#~ "\">MATE Feedback Page</ulink> 的指示。"

#~ msgid "Calculator"
#~ msgstr "計算機"

#~ msgid "Introduction"
#~ msgstr "介紹"

#~ msgid ""
#~ "The <application>mate-calc</application> application is multifunctional "
#~ "and can handle different types of mathematical approaches."
#~ msgstr ""
#~ "<application>Calculator</application> 應用程式含有多種函數可以處理不同類型"
#~ "的數學問題。"

#~ msgid ""
#~ "The <application>mate-calc</application> application has the following "
#~ "modes:"
#~ msgstr "<application>Calculator</application> 應用程式具有下列的模式："

#~ msgid "Basic Mode"
#~ msgstr "基本模式"

#~ msgid ""
#~ "Provides standard calculator functions. You can store numbers in 10 "
#~ "different memory registers, and easily retrieve and replace the numbers "
#~ "in the memory registers. Basic Mode is the default mode. You can use all "
#~ "of the Basic Mode functions in each of the other modes."
#~ msgstr ""
#~ "提供標準的計算機函數。您可以將數字儲存於 10 個不同的記憶體註冊，並且可以輕"
#~ "易地擷取和取代記憶體註冊中的數字。基本模式為預設的模式。您可以在其他每一種"
#~ "模式中使用所有的基本模式函數。"

#~ msgid "Provides several complex financial functions."
#~ msgstr "提供一些複雜的財務函數。"

#~ msgid ""
#~ "Provides many additional mathematical functions, including trigonometric "
#~ "and logical functions. You can also store your own functions and "
#~ "constants, when you use Scientific Mode."
#~ msgstr ""
#~ "提供許多額外的數學函數，包括三角函數和邏輯函數。您也可以在使用科學模式時儲"
#~ "存您自己的函數和常數。"

#~ msgid ""
#~ "You can use <application>mate-calc</application> in the following "
#~ "numbering systems:"
#~ msgstr ""
#~ "您可以在下列的數值系統中使用 <application>Calculator</application>："

#~ msgid "Numbering System"
#~ msgstr "數值系統"

#~ msgid "Base"
#~ msgstr "基礎"

#~ msgid ""
#~ "To start <application>mate-calc</application></application> from a "
#~ "command line, type the following command, then press <keycap>Return</"
#~ "keycap>:"
#~ msgstr ""
#~ "To start <application>Calculator</application></application> from a "
#~ "command line, type the following command, then press <keycap>Return</"
#~ "keycap>:"

#~ msgid ""
#~ "When you start <application>mate-calc</application></application>, the "
#~ "following window is displayed:"
#~ msgstr ""
#~ "當您啟動 <application>Calculator</application></application> 後，會顯示下"
#~ "面的視窗："

#~ msgid "<application>mate-calc</application> Basic Mode Window"
#~ msgstr "<application>Calculator</application> 基本模式視窗"

#~ msgid "Shows <application>mate-calc</application> Basic Mode window."
#~ msgstr "顯示 <application>Calculator</application> 基本模式視窗。"

#~ msgid ""
#~ "The <application>mate-calc</application></application> window contains "
#~ "the following elements:"
#~ msgstr ""
#~ "<application>Calculator</application></application> 視窗包含下列的 元素："

#~ msgid "Menubar"
#~ msgstr "功能表列"

#~ msgid ""
#~ "The menus on the menubar contain all of the commands that you need to "
#~ "work with <application>mate-calc</application></application>."
#~ msgstr ""
#~ "功能表列上的功能表包含所有 使用 <application>Calculator</application></"
#~ "application> 所需的指令。"

#~ msgid "Display area"
#~ msgstr "顯示區域"

#~ msgid ""
#~ "The display area shows the numbers that you enter, and the results of "
#~ "calculations. You can enter numbers of up to forty digits."
#~ msgstr ""
#~ "顯示區域可以顯示您輸入的數字，以及計算的結果。可以輸入的數字最多為 40 位"
#~ "數。"

#~ msgid "Mode area"
#~ msgstr "模式區域"

#~ msgid ""
#~ "The mode area displays the buttons for the currently selected mode. The "
#~ "Basic Mode buttons are always displayed. When you choose Financial Mode, "
#~ "the Financial Mode buttons are displayed above the Basic Mode buttons. "
#~ "When you choose Scientific Mode, the Scientific Mode buttons are "
#~ "displayed above the Basic Mode Buttons."
#~ msgstr ""
#~ "模式區域可以顯示目前選取模式的按鈕。基本模式按鈕永遠會顯示。當您選擇財務模"
#~ "式時，財務模式按鈕將會顯示在基本模式按鈕之上。當您選擇科學模式時，科學模式"
#~ "按鈕將會顯示在基本模式按鈕之上 。"

#~ msgid "Popup Menu"
#~ msgstr "即現式功能表"

#~ msgid "Shows popup-menu symbol."
#~ msgstr "顯示即現式功能表符號。"

#~ msgid ""
#~ "The <placeholder-1/> symbol on a <application>mate-calc</application> "
#~ "button indicates that a popup menu is displayed when you click on that "
#~ "button."
#~ msgstr ""
#~ "<placeholder-1/><application>Calculator</application> 按鈕上的符號表示按一"
#~ "下該按鈕後即會顯示即現式功能表。"

#~ msgid "Usage"
#~ msgstr "使用"

#~ msgid "To Use Calculator Functions"
#~ msgstr "使用計算機函數"

#~ msgid "To perform a calculation, use one of the following methods:"
#~ msgstr "如果要執行計算，請使用下列任一種 方法："

#~ msgid ""
#~ "Click on the <application>mate-calc</application> buttons to enter "
#~ "numbers and functions."
#~ msgstr ""
#~ "按一下 <application>Calculator</application> 按鈕可以輸入數字和函數。"

#~ msgid ""
#~ "Give focus to the <application>mate-calc</application> window, then use "
#~ "the keyboard or numeric keypad to specify the calculation that you want "
#~ "to perform. For a complete list of keyboard shortcuts, see <xref linkend="
#~ "\"mate-calc-keyboard-shortcut\"/>."
#~ msgstr ""
#~ "給予 <application>Calculator</application> 視窗焦點，然後使用鍵盤或數字鍵"
#~ "組來指定您要執行的計算。若需鍵盤捷徑的完整清單，請參閱 <xref linkend="
#~ "\"mate-calc-keyboard-shortcut\"/>。"

#~ msgid ""
#~ "The <application>mate-calc</application> application automatically "
#~ "displays numbers with more than 40 digits, and small numbers, as "
#~ "exponential numbers. For example, the following table shows the value "
#~ "that is displayed when you use the decimal numeric base with an accuracy "
#~ "of 2 significant places:"
#~ msgstr ""
#~ "<application>Calculator</application> 應用程式會自動以 40 位數以上和小型"
#~ "字 (如指數) 來顯示數字。例如，下列表格將顯示當使用十進制數值基礎且設定 2 "
#~ "位數的精準度時所顯示的值："

#~ msgid "Display"
#~ msgstr "顯示"

#~ msgid "Signifies"
#~ msgstr "意義"

#~ msgid ""
#~ "For information about how to enter a number in exponential format, see "
#~ "<xref linkend=\"mate-calc-enter-exp\"/>."
#~ msgstr ""
#~ "若需如何輸入指數的詳細資訊，請參閱 <xref linkend=\"mate-calc-enter-exp\"/"
#~ ">。"

#~ msgid ""
#~ "To copy the result of a calculation, choose <menuchoice><guimenu>Edit</"
#~ "guimenu><guimenuitem>Copy</guimenuitem></menuchoice>. You can paste the "
#~ "value into another application."
#~ msgstr ""
#~ "如果要複製計算的結果，請選擇 <menuchoice><guimenu>編輯</"
#~ "guimenu><guimenuitem>複製</guimenuitem></menuchoice>。 您可以將值貼入其他"
#~ "的應用程式。"

#~ msgid ""
#~ "To paste a previously copied value into the display area, choose "
#~ "<menuchoice><guimenu>Edit</guimenu><guimenuitem>Paste</guimenuitem></"
#~ "menuchoice>."
#~ msgstr ""
#~ "如果要將上一次複製的值貼入顯示區域，請選擇 <menuchoice><guimenu>編輯</"
#~ "guimenu><guimenuitem>貼上</guimenuitem></menuchoice>。"

#~ msgid "To Perform Basic Calculations"
#~ msgstr "執行基本計算"

#~ msgid ""
#~ "Basic Mode is displayed by default when you first start "
#~ "<application>mate-calc</application>. To explicitly invoke Basic Mode, "
#~ "choose <menuchoice><guimenu>View</guimenu><guimenuitem>Basic Mode</"
#~ "guimenuitem></menuchoice>."
#~ msgstr ""
#~ "當您第一次啟動 <application>Calculator</application> 時，預設為顯示基本模"
#~ "式。如果要確定啟動的是基本模式，請選擇 <menuchoice><guimenu>檢視</"
#~ "guimenu><guimenuitem>基本模式</guimenuitem></menuchoice>。"

#~ msgid "To Perform Simple Calculations"
#~ msgstr "執行簡單的計算"

#~ msgid ""
#~ "To perform simple calculations, use the buttons described in <xref "
#~ "linkend=\"mate-calc-TBL-simple-calc\"/>."
#~ msgstr ""
#~ "如果要執行簡單的計算，請使用 <xref linkend=\"mate-calc-TBL-simple-calc\"/"
#~ "> 中所述的按鈕。"

#~ msgid "Performing Simple Calculations"
#~ msgstr "執行簡單的計算"

#~ msgid "Button"
#~ msgstr "按鈕"

#~ msgid "Description"
#~ msgstr "說明"

#~ msgid "Example"
#~ msgstr "範例"

#~ msgid "Numerals"
#~ msgstr "數字"

#~ msgid "<guibutton>0</guibutton> to <guibutton>9</guibutton> inclusive"
#~ msgstr "<guibutton>0</guibutton> 到 <guibutton>9</guibutton> 以內的數字"

#~ msgid ""
#~ "In decimal and hexadecimal base, all numerals are available. In octal "
#~ "base, <guibutton>8</guibutton> and <guibutton>9</guibutton> are "
#~ "unavailable. In binary base, only <guibutton>0</guibutton> and "
#~ "<guibutton>1</guibutton> are available. The default base is decimal."
#~ msgstr ""
#~ "在十進制和十六進制基礎中，可以使用所有的數字。在八進制中，不可以使用 "
#~ "<guibutton>8</guibutton> 和 <guibutton>9</guibutton>。在二進制中，只能使"
#~ "用 <guibutton>0</guibutton> 和 <guibutton>1</guibutton>。預設基礎為十進"
#~ "制。"

#~ msgid "Numeric point"
#~ msgstr "數字點"

#~ msgid "."
#~ msgstr "。"

#~ msgid "Starts the fractional part of a numeric entry."
#~ msgstr "開始輸入數字的分數部份。"

#~ msgid "Calculate a result"
#~ msgstr "計算結果"

#~ msgid "Displays the result of the current calculation in the current base."
#~ msgstr "顯示以目前基礎求得的計算結果。"

#~ msgid "Addition"
#~ msgstr "加"

#~ msgid ""
#~ "Adds the current value in the display area to the next number that you "
#~ "enter."
#~ msgstr "將顯示區域的目前值加上下一個您輸入的數字。"

#~ msgid ""
#~ "Subtracts from the current value in the display area the next number that "
#~ "you enter."
#~ msgstr "將顯示區域的目前值減去下一個您輸入的數字。"

#~ msgid "Multiplication"
#~ msgstr "乘"

#~ msgid ""
#~ "Multiplies the current value in the display area by the next number that "
#~ "you enter."
#~ msgstr "將顯示區域的目前值乘上下一個您輸入的數字。"

#~ msgid ""
#~ "Divides the current value in the display area by the next number that you "
#~ "enter."
#~ msgstr "將顯示區域的目前值除以下一個您輸入的數字。"

#~ msgid "To Erase Characters"
#~ msgstr "消除字元"

#~ msgid ""
#~ "To erase characters, use the buttons described in <xref linkend="
#~ "\"mate-calc-TBL-erase-char\"/>."
#~ msgstr ""
#~ "如果要消除字元，請使用 <xref linkend=\"mate-calc-TBL-erase-char\"/> 中所述"
#~ "的按鈕。"

#~ msgid "Removes the rightmost character from the display area."
#~ msgstr "移除顯示區域最右邊的字元。"

#~ msgid "Clear Entry"
#~ msgstr "清除輸入"

#~ msgid "Removes the current value from the display area."
#~ msgstr "移除顯示區域的目前值。"

#~ msgid "Clear"
#~ msgstr "清除"

#~ msgid ""
#~ "Resets the current value in the display area to zero. <guibutton>Clr</"
#~ "guibutton> also deselects the <guilabel>Hyp</guilabel> and <guilabel>Inv</"
#~ "guilabel> options in Scientific Mode."
#~ msgstr ""
#~ "將顯示區域的目前值重設為零。<guibutton>Clr</guibutton> 也會取消選取科學模"
#~ "式中的 <guilabel>Hyp</guilabel> 和 <guilabel>Inv</guilabel> 選項 。"

#~ msgid "To Perform Arithmetic Calculations"
#~ msgstr "執行算術計算"

#~ msgid ""
#~ "To perform arithmetic calculations, use the buttons described in <xref "
#~ "linkend=\"mate-calc-TBL-arith-calc\"/>."
#~ msgstr ""
#~ "如果要執行算術計算，請使用 <xref linkend=\"mate-calc-TBL-arith-calc\"/> 中"
#~ "所述的按鈕。"

#~ msgid "Performing Arithmetic Calculations"
#~ msgstr "執行算術計算"

#~ msgid ""
#~ "Uses the next number that you enter to calculate that percentage of the "
#~ "current value in the display area."
#~ msgstr "使用您輸入的下一個數字來計算顯示區域中目前值的百分比。"

#~ msgid "Reciprocal"
#~ msgstr "倒數"

#~ msgid "Divides 1 by the current value in the display area."
#~ msgstr "將顯示區域的目前值除1。"

#~ msgid "Change the arithmetic sign"
#~ msgstr "變更算術符號"

#~ msgid ""
#~ "Changes a positive number to a negative number, or a negative number to a "
#~ "positive number."
#~ msgstr "將正數變為負數，或將負數變為正數。"

#~ msgid "Calculates the square root of the current value in the display area."
#~ msgstr "計算顯示區域之目前值的平方根。"

#~ msgid "Square"
#~ msgstr "平方"

#~ msgid "Calculates the square of the current value in the display area."
#~ msgstr "計算顯示區域之目前值的平方。"

#~ msgid ""
#~ "Calculates the integer portion of the current value in the display area."
#~ msgstr "計算顯示區域之目前值的整數部份。"

#~ msgid ""
#~ "Calculates the fractional portion of the current value in the display "
#~ "area."
#~ msgstr "計算顯示區域之目前值的分數部份。"

#~ msgid ""
#~ "Calculates the absolute value of the current value in the display area."
#~ msgstr "計算顯示區域之目前值的絕對值。"

#~ msgid "To Use the Calculator Memory Registers"
#~ msgstr "使用計算機記憶體註冊"

#~ msgid ""
#~ "You can store values in any of the ten <application>mate-calc</"
#~ "application> memory registers <guilabel>R0</guilabel> to <guilabel>R9</"
#~ "guilabel>. To display the memory registers, choose "
#~ "<menuchoice><guimenu>View</guimenu><guimenuitem>Memory Registers</"
#~ "guimenuitem></menuchoice>."
#~ msgstr ""
#~ "您可以將值儲存於 10 個 <application>Calculator</application> 記憶體註冊 "
#~ "<guilabel>R0</guilabel> 到 <guilabel>R9</guilabel> 中的任一個記憶體註冊。"
#~ "如果要顯示記憶體註冊，請選擇 <menuchoice><guimenu>檢視</"
#~ "guimenu><guimenuitem>記憶體註冊</guimenuitem></menuchoice>。"

#~ msgid ""
#~ "<xref linkend=\"mate-calc-TBL-mem-reg\"/> describes the memory functions "
#~ "that you can use."
#~ msgstr ""
#~ "<xref linkend=\"mate-calc-TBL-mem-reg\"/> 將說明您可以使用的記憶體函數。"

#~ msgid "Memory Functions"
#~ msgstr "記憶體函數"

#~ msgid "Store Value in Memory Register"
#~ msgstr "將值儲存於記憶體註冊"

#~ msgid ""
#~ "Stores the current contents of the display area in the specified memory "
#~ "register. Click on <guibutton>Sto</guibutton>, and select a memory "
#~ "register from the popup menu."
#~ msgstr ""
#~ "將顯示區域的目前內容儲存於指定的記憶體註冊。按一下 <guibutton>Sto</"
#~ "guibutton>，然後選取即現式功能表上的記憶體註冊。"

#~ msgid ""
#~ "To clear a memory register during a <application>mate-calc</application> "
#~ "session:"
#~ msgstr ""
#~ "如果要在 <application>Calculator</application> 階段作業期間清除記憶體註"
#~ "冊："

#~ msgid "Click <guibutton>Clr</guibutton>."
#~ msgstr "按一下 <guibutton>Clr</guibutton>。"

#~ msgid "Click on <guibutton>Sto</guibutton>."
#~ msgstr "按一下 <guibutton>Sto</guibutton>。"

#~ msgid "Select the memory register from the popup menu."
#~ msgstr "選取即現式功能表上的記憶體註冊。"

#~ msgid "The value 22 is stored in memory register <guilabel>R2</guilabel>"
#~ msgstr "值 22 已儲存於記憶體註冊 <guilabel>R2</guilabel>"

#~ msgid "Retrieve Value From Memory Register"
#~ msgstr "擷取記憶體註冊的值"

#~ msgid ""
#~ "Retrieves the contents of the specified memory register. Click on "
#~ "<guibutton>Rcl</guibutton>, and select the memory register from the popup "
#~ "menu."
#~ msgstr ""
#~ "擷取指定記憶體註冊的內容。按一下 <guibutton>Rcl</guibutton>，然後選取即現"
#~ "式功能表上的記憶體註冊。"

#~ msgid "where 22 is the value previously stored in memory register R2"
#~ msgstr "其中 22 是上一次儲存於記憶體註冊 R2 的值"

#~ msgid "Exchange Memory Register Value and Displayed Value"
#~ msgstr "將記憶體註冊值與顯示的值交換"

#~ msgid ""
#~ "Exchanges the contents of the specified memory register and the current "
#~ "value in the display area. Click on <guibutton>Exch</guibutton>, and "
#~ "select the memory register from the popup menu."
#~ msgstr ""
#~ "將指定記憶體註冊的內容與顯示區域的目前值交換。按一下 <guibutton>Exch</"
#~ "guibutton>，然後選取即現式功能表上的記憶體註冊。"

#~ msgid ""
#~ "Value in display area changes from 44 to 22, value in R2 changes from 22 "
#~ "to 44"
#~ msgstr "顯示區域的值從 44 變為 22，而 R2 的值則從 22 變為 44"

#~ msgid ""
#~ "If you use keyboard shortcuts, you can use the keyboard to specify the "
#~ "memory register, as shown in the following examples:"
#~ msgstr ""
#~ "如果您是使用鍵盤捷徑，您可以使用鍵盤來指定記憶體註冊，如下列範例所示："

#~ msgid "Keyboard Entry"
#~ msgstr "鍵盤輸入"

#~ msgid ""
#~ "Stores the current contents of the display area in memory register "
#~ "<guilabel>R2</guilabel>."
#~ msgstr "將顯示區域的目前內容儲存於記憶體註冊 <guilabel>R2</guilabel>。"

#~ msgid ""
#~ "Retrieves the current contents of memory register <guilabel>R2</guilabel> "
#~ "into the display area."
#~ msgstr "擷取記憶體註冊 <guilabel>R2</guilabel> 的目前內容並放入顯示區域。"

#~ msgid ""
#~ "Exchanges the current value of the display area with the contents of "
#~ "memory register <guilabel>R2</guilabel>."
#~ msgstr "將顯示區域的目前值與記憶體註冊 <guilabel>R2</guilabel> 的內容交換。"

#~ msgid "To Display ASCII Values"
#~ msgstr "顯示 ASCII 值"

#~ msgid ""
#~ "To display the ASCII value of a character, choose "
#~ "<menuchoice><guimenu>Edit</guimenu><guimenuitem>Insert ASCII Value</"
#~ "guimenuitem></menuchoice>."
#~ msgstr ""
#~ "如果要顯示字元的 ASCII 值，請選擇 <menuchoice><guimenu>編輯</"
#~ "guimenu><guimenuitem>插入 ASCII 值</guimenuitem></menuchoice>。"

#~ msgid "The Insert ASCII Value dialog is displayed."
#~ msgstr "此時會顯示插入 ASCII 值對話方塊。"

#~ msgid ""
#~ "Enter the required character in the <guilabel>Character</guilabel> field, "
#~ "and click on <guibutton>Insert</guibutton>. The ASCII value of that "
#~ "character, in the current numeric base, appears in the display area. For "
#~ "example, the ASCII value of B in decimal base is 66."
#~ msgstr ""
#~ "在<guilabel>字元</guilabel>欄位中輸入您需要的字元，然後按一下<guibutton>插"
#~ "入</guibutton>。顯示區域即會出現以目前數值基礎求得的該字元 ASCII 值。例"
#~ "如，使用十進制基礎 B 的 ASCII 值為 66。"

#~ msgid ""
#~ "To change to Financial Mode, choose <menuchoice><guimenu>View</"
#~ "guimenu><guimenuitem>Financial Mode</guimenuitem></menuchoice>."
#~ msgstr ""
#~ "如果要變更為財務模式，請選擇 <menuchoice><guimenu>檢視</"
#~ "guimenu><guimenuitem>財務模式</guimenuitem></menuchoice>。"

#~ msgid ""
#~ "When you change to Financial Mode, the following Financial Mode buttons "
#~ "are displayed above the Basic Mode buttons:"
#~ msgstr ""
#~ "當您變更為財務模式時，下列的財務模式按鈕將會顯示在基本模式按鈕之上："

#~ msgid "<application>mate-calc</application> Financial Mode Buttons"
#~ msgstr "<application>Calculator</application> 財務模式按鈕"

#~ msgid "Shows <application>mate-calc</application> Financial Mode buttons."
#~ msgstr "顯示 <application>Calculator</application> 財務模式按鈕。"

#~ msgid ""
#~ "To perform financial calculations, use the buttons described in <xref "
#~ "linkend=\"mate-calc-TBL-financial-calc\"/>."
#~ msgstr ""
#~ "如果要執行財務計算，請使用 <xref linkend=\"mate-calc-TBL-financial-calc\"/"
#~ "> 中所述的按鈕。"

#~ msgid "Performing Financial Calculations"
#~ msgstr "執行財務計算"

#~ msgid "Compounding Term"
#~ msgstr "複利期間"

#~ msgid "This function uses the following memory registers:"
#~ msgstr "這個函數會使用下列的記憶體註冊："

#~ msgid "Register 0"
#~ msgstr "註冊 0"

#~ msgid "<replaceable>int</replaceable>, the periodic interest rate"
#~ msgstr "<replaceable>int</replaceable>，定期利率"

#~ msgid "Register 1"
#~ msgstr "註冊 1"

#~ msgid "<replaceable>fv</replaceable>, the future value"
#~ msgstr "<replaceable>fv</replaceable>，期約值"

#~ msgid "Register 2"
#~ msgstr "註冊 2"

#~ msgid "<replaceable>pv</replaceable>, the present value"
#~ msgstr "<replaceable>pv</replaceable>，現值"

#~ msgid ""
#~ "You have just deposited $8000 in an account that pays an annual interest "
#~ "rate of 9%, compounded monthly. Given the annual interest rate, you "
#~ "determine that the monthly interest rate is 0.09 / 12 = 0.0075. To "
#~ "calculate the time period necessary to double your investment, put the "
#~ "following values into the first three memory registers:"
#~ msgstr ""
#~ "您已經在帳戶中存入 $8000，利率為年利率 9% 每月複利計算。依據年利率，您求得"
#~ "的月利率為 0.09 / 12 = 0.0075。如果要計算使投資倍增所需的時間週期，請將下"
#~ "列的值放前三個記憶體註冊："

#~ msgid "Click on <guibutton>Ctrm</guibutton>."
#~ msgstr "按一下 <guibutton>Ctrm</guibutton>。"

#~ msgid "The investment doubles in value in 92.77 months."
#~ msgstr "投資金額倍增所需的時間為 92.77 個月。"

#~ msgid "Double-Declining Depreciation"
#~ msgstr "倍數餘額折舊"

#~ msgid "<replaceable>cost</replaceable>, the amount paid for the asset"
#~ msgstr "<replaceable>成本</replaceable>，購買資產的金額"

#~ msgid ""
#~ "<replaceable>salvage</replaceable>, the value of the asset at the end of "
#~ "its life"
#~ msgstr "<replaceable>剩餘價值</replaceable>，資產在到達使用年限後的價值"

#~ msgid "<replaceable>life</replaceable>, the useful life of the asset"
#~ msgstr "<replaceable>年限</replaceable>，資產的使用年限"

#~ msgid "Register 3"
#~ msgstr "註冊 3"

#~ msgid ""
#~ "<replaceable>period</replaceable>, the time period for depreciation "
#~ "allowance"
#~ msgstr "<replaceable>週期</replaceable>，提列折舊的時間週期"

#~ msgid ""
#~ "You have just purchased an office machine for $8000. The useful life of "
#~ "this machine is six years. The salvage value after six years is $900. To "
#~ "calculate the depreciation expense for the fourth year, using the double-"
#~ "declining balance method, put the following values into the first four "
#~ "memory registers:"
#~ msgstr ""
#~ "您已經購買了 $8000 的事務機器。機器的使用年限為 6 年。6 年後的剩餘價值為 "
#~ "$900。 如果要計算第 4 年的折舊額，請使用倍數餘額法將下列的值放入前四個記憶"
#~ "體註冊："

#~ msgid "Click on <guibutton>Ddb</guibutton>."
#~ msgstr "按一下 <guibutton>Ddb</guibutton>。"

#~ msgid "The depreciation expense for the fourth year is $790.12."
#~ msgstr "第 4 年的折舊額為 $790.12。"

#~ msgid "Future Value"
#~ msgstr "期約值"

#~ msgid "<replaceable>pmt</replaceable>, the periodic payment"
#~ msgstr "<replaceable>pmt</replaceable>，分期付款"

#~ msgid "<replaceable>n</replaceable>, the number of periods"
#~ msgstr "<replaceable>n</replaceable>，週期數"

#~ msgid ""
#~ "You plan to deposit $4000 in a bank account on the last day of each year "
#~ "for the next 20 years. The account pays 8% interest, compounded annually. "
#~ "Interest is paid on the last day of each year. To calculate the value of "
#~ "your account in 20 years, put the following values into the first three "
#~ "memory registers:"
#~ msgstr ""
#~ "您計劃在未來 20 年內每年的最後一天在銀行帳戶存入 $4000。帳戶支付 8% 利息，"
#~ "每年複利計算。利息的支付日期為每年的最後一天。 如果要計算帳戶 20 年後的價"
#~ "值，請將下列的值放入前三個記憶體註冊："

#~ msgid "Click on <guibutton>Fv</guibutton>."
#~ msgstr "按一下 <guibutton>Fv</guibutton>。"

#~ msgid "At the end of 20 years, the value of the account is $183,047.86."
#~ msgstr "當 20 年到期後，帳戶的價值為 $183,047.86。"

#~ msgid "Periodic Payment"
#~ msgstr "分期付款"

#~ msgid "<replaceable>prin</replaceable>, the principal"
#~ msgstr "<replaceable>prin</replaceable>，本金"

#~ msgid "<replaceable>n</replaceable>, the term"
#~ msgstr "<replaceable>n</replaceable>，期間"

#~ msgid ""
#~ "You are considering a $120,000 mortgage for 30 years at an annual "
#~ "interest rate of 11.0%. Given the annual interest rate, you determine "
#~ "that the monthly interest rate is 0.11 / 12 = 0.00917. The term is 30 * "
#~ "12 = 360 months. To calculate the monthly repayment for this mortgage, "
#~ "put the following values into the first three memory registers:"
#~ msgstr ""
#~ "您正考慮一項 30 年 $120,000 年利率 11.0%的扺押貸款。依據年利率，您求得的月"
#~ "利率為 0.11 / 12 = 0.00917。期間為 30 * 12 = 360 個月。如果要計算這個扺押"
#~ "貸款每月償還的金額，請將下列的值放入前三個記憶體註冊："

#~ msgid "Click on <guibutton>Pmt</guibutton>."
#~ msgstr "按一下 <guibutton>Pmt</guibutton>。"

#~ msgid "The monthly repayment is $1143.15."
#~ msgstr "每月償還的金額為 $1143.15。"

#~ msgid "Present Value"
#~ msgstr "現值"

#~ msgid ""
#~ "You have just won a million dollars. The prize is awarded in 20 annual "
#~ "payments of $50,000 each. Annual payments are received at the end of each "
#~ "year. If you were to accept the annual payments of $50,000, you would "
#~ "invest the money at a rate of 9%, compounded annually."
#~ msgstr ""
#~ "您剛嬴得了一佰萬元。獎金將分 20 年領取每年領取 $50,000。每年的最後一天領取"
#~ "獎金。如果您想接受每年領取 $50,000，即表示您的投資為年利率 9% 每年複利計"
#~ "算。"

#~ msgid ""
#~ "However, you are given the option of receiving a single lump-sum payment "
#~ "of $400,000 instead of the million dollars annuity. To calculate which "
#~ "option is worth more in today's dollars, put the following values into "
#~ "the first three memory registers:"
#~ msgstr ""
#~ "但是，您也可以選擇一次領取 $400,000，而不是一佰萬的年金。 如果要計算那一種"
#~ "比較符合現值，請將下列的值放入前三個記憶體註冊："

#~ msgid "Click on <guibutton>Pv</guibutton>."
#~ msgstr "按一下 <guibutton>Pv</guibutton>。"

#~ msgid ""
#~ "The $1,000,000 paid over 20 years is worth $456,427.28 in present dollars."
#~ msgstr "$1,000,000 分20 年領取相當於現值 $456,427.28。"

#~ msgid "Periodic Interest Rate"
#~ msgstr "定期利率"

#~ msgid ""
#~ "You have invested $20,000 in a bond. The bond matures in five years, and "
#~ "has a maturity value of $30,000. Interest is compounded monthly. The term "
#~ "is 5 * 12 = 60 months. To calculate the periodic interest rate for this "
#~ "investment, put the following values into the first three memory "
#~ "registers:"
#~ msgstr ""
#~ "您已經投資了 $20,000 的債券。債券為 5 年期，到期值為 $30,000。利息為每月複"
#~ "利計算。期間為 5 * 12 = 60 個月。 如果要計算這項投資的定期利率，請將下列的"
#~ "值放入前三個記憶體註冊："

#~ msgid "Click on <guibutton>Rate</guibutton>."
#~ msgstr "按一下 <guibutton>利率</guibutton>。"

#~ msgid ""
#~ "The monthly interest rate is 0.678%. The annual interest rate is 0.678% * "
#~ "12 = 8.14%."
#~ msgstr "月利率為 0.678%。年利率為 0.678% * 12 = 8.14%。"

#~ msgid "Straight-Line Depreciation"
#~ msgstr "直線折舊"

#~ msgid ""
#~ "You have just purchased an office machine for $8000. The useful life of "
#~ "this machine is six years. The salvage value after six years is $900. To "
#~ "calculate the yearly depreciation expense, using the straight-line "
#~ "method, put the following values into the first three memory registers:"
#~ msgstr ""
#~ "您已經購買了 $8000 的事務機器。機器的使用年限為 6 年。6 年後的剩餘價值為 "
#~ "$900。 如果要計算每年的折舊額，請使用直線折舊法將下列的值放入前三個記憶體"
#~ "註冊："

#~ msgid "Click on <guibutton>Sln</guibutton>."
#~ msgstr "按一下 <guibutton>Sln</guibutton>。"

#~ msgid "The yearly depreciation expense is $1183.33."
#~ msgstr "每年的折舊額為 $1183.33。"

#~ msgid "Sum-Of-The-Years'-Digits Depreciation"
#~ msgstr "年數合計折舊"

#~ msgid ""
#~ "You have just purchased an office machine for $8000. The useful life of "
#~ "this machine is six years. The salvage value after six years is $900. To "
#~ "calculate the depreciation expense for the fourth year, using the sum-of-"
#~ "the-years'-digits method, put the following values into the first four "
#~ "memory registers:"
#~ msgstr ""
#~ "您已經購買了 $8000 的事務機器。機器的使用年限為 6 年。6 年後的剩餘價值為 "
#~ "$900。 如果要計算第 4 年的折舊額，請使用年數合計折舊法將下列的值放入前四個"
#~ "記憶體註冊："

#~ msgid "Click on <guibutton>Syd</guibutton>."
#~ msgstr "按一下 <guibutton>Syd</guibutton>。"

#~ msgid "The depreciation expense for the fourth year is $1014.29."
#~ msgstr "第 4 年的折舊額為 $1014.29。"

#~ msgid "Payment Period"
#~ msgstr "付款週期"

#~ msgid ""
#~ "You plan to deposit $1800 in a bank account on the last day of each year. "
#~ "The account pays 11% interest, compounded annually. Interest is paid on "
#~ "the last day of each year. To calculate the time period necessary to "
#~ "accumulate $120,000, put the following values into the first three memory "
#~ "registers:"
#~ msgstr ""
#~ "您計劃在每年的最後一天將 $1800 存入銀行帳戶。帳戶支付 11% 利息，每年複利計"
#~ "算。利息的支付日期為每年的最後一天。 如果要計算累積到 $120,000 所需的時間"
#~ "週期，請將下列的值放前三個記憶體註冊："

#~ msgid "Click on <guibutton>Term</guibutton>."
#~ msgstr "按一下 <guibutton>期間</guibutton>。"

#~ msgid "$120,000 accumulates in the account in 20.32 years."
#~ msgstr "帳戶會在 20.32 年內累積到 $120,000。"

#~ msgid "To Perform Scientific Calculations"
#~ msgstr "執行科學計算"

#~ msgid ""
#~ "To change to Scientific Mode, choose <menuchoice><guimenu>View</"
#~ "guimenu><guimenuitem>Scientific Mode</guimenuitem></menuchoice>."
#~ msgstr ""
#~ "如果要變更為科學模式，請選擇 <menuchoice><guimenu>檢視</"
#~ "guimenu><guimenuitem>科學模式</guimenuitem></menuchoice>。"

#~ msgid ""
#~ "When you change to Scientific Mode, the following Scientific Mode buttons "
#~ "are displayed above the Basic Mode buttons:"
#~ msgstr ""
#~ "當您變更為科學模式時，下列的科學模式按鈕將會顯示在基本模式按鈕之上："

#~ msgid "<application>mate-calc</application> Scientific Mode Buttons"
#~ msgstr "<application>Calculator</application> 科學模式按鈕"

#~ msgid "Shows <application>mate-calc</application> Scientific Mode buttons."
#~ msgstr "顯示 <application>Calculator</application> 科學模式按鈕。"

#~ msgid "To Set the Accuracy"
#~ msgstr "設定精確度"

#~ msgid ""
#~ "To set the accuracy of the display area and of the memory registers, "
#~ "click on <guibutton>Acc</guibutton>, and select from the popup menu the "
#~ "accuracy level that you require. The current accuracy level is indicated "
#~ "by a preceding black circle in the popup menu. Up to 9 significant places "
#~ "can be displayed. The default accuracy is 9 significant places."
#~ msgstr ""
#~ "如果要設定顯示區域和記憶體註冊的精確度，請按一下 <guibutton>Acc</"
#~ "guibutton>，然後選取即現式功能表上您需要的精確度等級。即現式功能表上目前的"
#~ "精確度等級之前會加上黑色圓圈。最多可以顯示 9 位數。預設的精確度為 9 位數。"

#~ msgid ""
#~ "By default, trailing zeroes are not shown. To display trailing zeroes, "
#~ "click on <guibutton>Acc</guibutton> and select <guilabel>Show Trailing "
#~ "Zeroes</guilabel> from the popup menu, or choose "
#~ "<menuchoice><guimenu>View</guimenu><guimenuitem>Show Trailing Zeroes</"
#~ "guimenuitem></menuchoice>. A preceding tick in the <guibutton>Acc</"
#~ "guibutton> popup menu or <guimenu>View</guimenu> menu indicates that the "
#~ "<guilabel>Show Trailing Zeroes</guilabel> option has been selected. To "
#~ "hide trailing zeroes, choose <menuchoice><guimenu>View</"
#~ "guimenu><guimenuitem>Show Trailing Zeroes</guimenuitem></menuchoice> "
#~ "again."
#~ msgstr ""
#~ "依據預設，不顯示尾隨的零。如果要顯示尾隨的零，請按一下 <guibutton>Acc</"
#~ "guibutton>，然後選取即現式功能表上的<guilabel>顯示尾隨的零</guilabel>，或"
#~ "選擇<menuchoice><guimenu>檢視</guimenu><guimenuitem>顯示尾隨的零</"
#~ "guimenuitem></menuchoice>。在 <guibutton>Acc</guibutton> 即現式功能表上或"
#~ "<guimenu>檢視</guimenu>功能表上前置的標記表示已選取<guilabel>顯示尾隨的零"
#~ "</guilabel>選項。如果要隱藏尾隨的零，請再選擇一次<menuchoice><guimenu>檢視"
#~ "</guimenu><guimenuitem>顯示尾隨的零</guimenuitem></menuchoice>。"

#~ msgid ""
#~ "The examples in the following table show how the accuracy setting affects "
#~ "<replaceable>x</replaceable> in the display area, when you use decimal "
#~ "base, with the <guimenuitem>Show Trailing Zeroes</guimenuitem> option "
#~ "selected, for the <literal>1 / 8 = <replaceable>x</replaceable></literal> "
#~ "calculation:"
#~ msgstr ""
#~ "下列表格中的範例將說明精確度設定對顯示區域中 <replaceable>x</replaceable> "
#~ "的影響 (使用十進制基礎並選取<guimenuitem>顯示尾隨的零</guimenuitem>選項來"
#~ "計算 <literal>1 / 8 = <replaceable>x</replaceable></literal>)："

#~ msgid "Accuracy"
#~ msgstr "精確度"

#~ msgid "1 significant place"
#~ msgstr "1 位數"

#~ msgid "2 significant places"
#~ msgstr "2 位數"

#~ msgid "3 significant places"
#~ msgstr "3 位數"

#~ msgid "To Set the Numeric Base"
#~ msgstr "設定數值基礎"

#~ msgid ""
#~ "To set the numeric base, select one of the buttons described in <xref "
#~ "linkend=\"mate-calc-TBL-num-base\"/>."
#~ msgstr ""
#~ "如果要設定數值基礎，請選取 <xref linkend=\"mate-calc-TBL-num-base\"/> 中所"
#~ "述的按鈕。"

#~ msgid "Setting the Numeric Base"
#~ msgstr "設定數值基礎"

#~ msgid "Binary Base"
#~ msgstr "二進制基礎"

#~ msgid "Sets the numeric base to binary, that is, base 2."
#~ msgstr "將數值基礎設為二進制，即基底為 2。"

#~ msgid "Octal Base"
#~ msgstr "八進制基礎"

#~ msgid "Sets the numeric base to octal, that is, base 8."
#~ msgstr "將數值基礎設為八進制，即基底為 8。"

#~ msgid "Decimal Base"
#~ msgstr "十進制基礎"

#~ msgid ""
#~ "Sets the numeric base to decimal, that is, base 10. Decimal is the "
#~ "default numeric base. If you change from Scientific Mode to either Basic "
#~ "Mode or Financial Mode, <application>mate-calc</application> "
#~ "automatically sets the numeric base to decimal."
#~ msgstr ""
#~ "將數值基礎設為十進制，即基底為 10。十進制為預設的數值基礎。如果您是從科學"
#~ "模式變為基本模式或財務模式，<application>Calculator</application> 會自動將"
#~ "數值基礎設為十進制。"

#~ msgid "Hexadecimal Base"
#~ msgstr "十六進制基礎"

#~ msgid "Sets the numeric base to hexadecimal, that is, base 16."
#~ msgstr "將數值基礎設為十六進制，即基底為 16。"

#~ msgid "To Set the Display Type"
#~ msgstr "設定顯示類型"

#~ msgid ""
#~ "To set the display type, select one of the buttons described in <xref "
#~ "linkend=\"mate-calc-TBL-display-type\"/>."
#~ msgstr ""
#~ "如果要設定顯示類型，請選取 <xref linkend=\"mate-calc-TBL-display-type\"/> "
#~ "中所述的按鈕。"

#~ msgid "Setting the Display Type"
#~ msgstr "設定顯示類型"

#~ msgid "Fixed-Point Display Type"
#~ msgstr "定點顯示類型"

#~ msgid ""
#~ "Sets the display type to Fixed-Point format. Results are not displayed in "
#~ "scientific notation. Fixed-Point is the default display type. If you "
#~ "change from Scientific Mode to either Basic Mode or Financial Mode, "
#~ "<application>mate-calc</application> automatically sets the display type "
#~ "to Fixed-Point format."
#~ msgstr ""
#~ "將顯示類型設為定點格式。結果將不以科學記號顯示。定點是預設的顯示類型。 如"
#~ "果您是從科學模式變為基本模式或財務模式，<application>Calculator</"
#~ "application> 會自動將顯示類型設為定點格式。"

#~ msgid "Scientific Display Type"
#~ msgstr "科學顯示類型"

#~ msgid ""
#~ "Sets the display type to Scientific format. Results are displayed in "
#~ "scientific notation, with a fixed number of numeric digits."
#~ msgstr "將顯示類型設為科學格式。結果將以位數固定的科學記號顯示。"

#~ msgid "To Set the Trigonometric Type"
#~ msgstr "設定三角類型"

#~ msgid ""
#~ "To set the trigonometric type, select one of the buttons described in "
#~ "<xref linkend=\"mate-calc-TBL-trig-type\"/>."
#~ msgstr ""
#~ "如果要設定三角類型，請選取 <xref linkend=\"mate-calc-TBL-trig-type\"/> 中"
#~ "所述的按鈕。"

#~ msgid "Setting the Trigonometric Type"
#~ msgstr "設定三角類型"

#~ msgid "Degrees"
#~ msgstr "角度"

#~ msgid ""
#~ "Sets the trigonometric type to Degrees. Degrees is the default "
#~ "trigonometric type."
#~ msgstr "將三角類型設為角度。角度是預設的三角類型。"

#~ msgid "Gradients"
#~ msgstr "斜度"

#~ msgid "Sets the trigonometric type to Gradients."
#~ msgstr "將三角類型設為斜度。"

#~ msgid "Radians"
#~ msgstr "弧度"

#~ msgid "Sets the trigonometric type to Radians."
#~ msgstr "將三角類型設為弧度。"

#~ msgid "To Set the Trigonometric Options"
#~ msgstr "設定三角選項"

#~ msgid ""
#~ "To set the trigonometric options, use the options described in <xref "
#~ "linkend=\"mate-calc-TBL-trig-options\"/>."
#~ msgstr ""
#~ "如果要設定三角選項，請使用 <xref linkend=\"mate-calc-TBL-trig-options\"/> "
#~ "中所述的選項。"

#~ msgid "Setting the Trigonometric Options"
#~ msgstr "設定三角選項"

#~ msgid ""
#~ "Selects the hyperbolic option for use with the trigonometric functions."
#~ msgstr "選取三角函數使用的雙曲線選項。"

#~ msgid "Inverse Option Indicator"
#~ msgstr "反三角選項指示器"

#~ msgid "Selects the inverse option for use with the trigonometric functions."
#~ msgstr "選取三角函數使用的反三角選項。"

#~ msgid ""
#~ "By default, the options described in <xref linkend=\"mate-calc-TBL-trig-"
#~ "options\"/> are not selected. Click <guibutton>Clr</guibutton> to "
#~ "deselect these options."
#~ msgstr ""
#~ "依據預設，不會選取 <xref linkend=\"mate-calc-TBL-trig-options\"/> 中所述的"
#~ "選項。按一下 <guibutton>Clr</guibutton> 可以取消選取這些選項。"

#~ msgid "To Calculate Trigonometric Values"
#~ msgstr "計算三角值"

#~ msgid ""
#~ "To calculate trigonometric values, use the buttons described in <xref "
#~ "linkend=\"mate-calc-TBL-trig-calc\"/>."
#~ msgstr ""
#~ "如果要計算三角值，請使用 <xref linkend=\"mate-calc-TBL-trig-calc\"/> 中所"
#~ "述的按鈕。"

#~ msgid "Calculating Trigonometric Values"
#~ msgstr "計算三角值"

#~ msgid "Cosine <literal>cos</literal>"
#~ msgstr "餘弦 <literal>cos</literal>"

#~ msgid ""
#~ "<guibutton>Cos</guibutton>, <guilabel>Hyp</guilabel> option not selected, "
#~ "<guilabel>Inv</guilabel> option not selected"
#~ msgstr ""
#~ "未選取 <guibutton>Cos</guibutton>、 <guilabel>Hyp</guilabel> 選項，未選取 "
#~ "<guilabel>Inv</guilabel> 選項"

#~ msgid "Calculates the cosine of the current value in the display area."
#~ msgstr "計算顯示區域之目前值的餘弦。"

#~ msgid "Arc Cosine <literal>acos</literal>"
#~ msgstr "反餘弦 <literal>acos</literal>"

#~ msgid ""
#~ "<guibutton>Cos</guibutton>, <guilabel>Hyp</guilabel> option not selected, "
#~ "<guilabel>Inv</guilabel> option selected"
#~ msgstr ""
#~ "未選取 <guibutton>Cos</guibutton>、<guilabel>Hyp</guilabel> 選項，未選取 "
#~ "<guilabel>Inv</guilabel> 選項"

#~ msgid "Calculates the arc cosine of the current value in the display area."
#~ msgstr "計算顯示區域之目前值的反餘弦。"

#~ msgid "Hyperbolic Cosine <literal>cosh</literal>"
#~ msgstr "雙曲餘弦 <literal>cosh</literal>"

#~ msgid ""
#~ "<guibutton>Cos</guibutton>, <guilabel>Hyp</guilabel> option selected, "
#~ "<guilabel>Inv</guilabel> option not selected"
#~ msgstr ""
#~ "未選取 <guibutton>Cos</guibutton>、<guilabel>Hyp</guilabel> 選項，未選取 "
#~ "<guilabel>Inv</guilabel> 選項"

#~ msgid ""
#~ "Calculates the hyperbolic cosine of the current value in the display area."
#~ msgstr "計算顯示區域之目前值的雙曲餘弦。"

#~ msgid "Arc Hyperbolic Cosine <literal>acosh</literal>"
#~ msgstr "反雙曲餘弦 <literal>acosh</literal>"

#~ msgid ""
#~ "<guibutton>Cos</guibutton>, <guilabel>Hyp</guilabel> option selected, "
#~ "<guilabel>Inv</guilabel> option selected"
#~ msgstr ""
#~ "未選取 <guibutton>Cos</guibutton>、<guilabel>Hyp</guilabel> 選項，未選取 "
#~ "<guilabel>Inv</guilabel> 選項"

#~ msgid ""
#~ "Calculates the arc hyperbolic cosine of the current value in the display "
#~ "area."
#~ msgstr "計算顯示區域之目前值的反雙曲餘弦。"

#~ msgid "Sine <literal>sin</literal>"
#~ msgstr "正弦 <literal>sin</literal>"

#~ msgid ""
#~ "<guibutton>Sin</guibutton>, <guilabel>Hyp</guilabel> option not selected, "
#~ "<guilabel>Inv</guilabel> option not selected"
#~ msgstr ""
#~ "未選取 <guibutton>Sin</guibutton>、<guilabel>Hyp</guilabel> 選項，未選取 "
#~ "<guilabel>Inv</guilabel> 選項"

#~ msgid "Calculates the sine of the current value in the display area."
#~ msgstr "計算顯示區域之目前值的正弦。"

#~ msgid "Arc Sine <literal>asin</literal>"
#~ msgstr "反正弦 <literal>asin</literal>"

#~ msgid ""
#~ "<guibutton>Sin</guibutton>, <guilabel>Hyp</guilabel> option not selected, "
#~ "<guilabel>Inv</guilabel> option selected"
#~ msgstr ""
#~ "未選取 <guibutton>Sin</guibutton>、<guilabel>Hyp</guilabel> 選項，未選取 "
#~ "<guilabel>Inv</guilabel> 選項"

#~ msgid "Calculates the arc sine of the current value in the display area."
#~ msgstr "計算顯示區域之目前值的反正弦。"

#~ msgid "Hyperbolic Sine <literal>sinh</literal>"
#~ msgstr "雙曲正弦 <literal>sinh</literal>"

#~ msgid ""
#~ "<guibutton>Sin</guibutton>, <guilabel>Hyp</guilabel> option selected, "
#~ "<guilabel>Inv</guilabel> option not selected"
#~ msgstr ""
#~ "未選取 <guibutton>Sin</guibutton>、<guilabel>Hyp</guilabel> 選項，未選取 "
#~ "<guilabel>Inv</guilabel> 選項"

#~ msgid ""
#~ "Calculates the hyperbolic sine of the current value in the display area."
#~ msgstr "計算顯示區域之目前值的雙曲正弦。"

#~ msgid "Arc Hyperbolic Sine <literal>asinh</literal>"
#~ msgstr "反雙曲正弦 <literal>asinh</literal>"

#~ msgid ""
#~ "<guibutton>Sin</guibutton>, <guilabel>Hyp</guilabel> option selected, "
#~ "<guilabel>Inv</guilabel> option selected"
#~ msgstr ""
#~ "未選取 <guibutton>Sin</guibutton>、<guilabel>Hyp</guilabel> 選項，未選取 "
#~ "<guilabel>Inv</guilabel> 選項"

#~ msgid ""
#~ "Calculates the arc hyperbolic sine of the current value in the display "
#~ "area."
#~ msgstr "計算顯示區域之目前值的反雙曲正弦。"

#~ msgid "Tangent <literal>tan</literal>"
#~ msgstr "正切 <literal>tan</literal>"

#~ msgid ""
#~ "<guibutton>Tan</guibutton>, <guilabel>Hyp</guilabel> option not selected, "
#~ "<guilabel>Inv</guilabel> option not selected"
#~ msgstr ""
#~ "未選取 <guibutton>Tan</guibutton>、<guilabel>Hyp</guilabel> 選項，未選取 "
#~ "<guilabel>Inv</guilabel> 選項"

#~ msgid "Calculates the tangent of the current value in the display area."
#~ msgstr "計算顯示區域之目前值的正切。"

#~ msgid "Arc Tangent <literal>atan</literal>"
#~ msgstr "反正切 <literal>atan</literal>"

#~ msgid ""
#~ "<guibutton>Tan</guibutton>, <guilabel>Hyp</guilabel> option not selected, "
#~ "<guilabel>Inv</guilabel> option selected"
#~ msgstr ""
#~ "未選取 <guibutton>Tan</guibutton>、<guilabel>Hyp</guilabel> 選項，未選取 "
#~ "<guilabel>Inv</guilabel> 選項"

#~ msgid "Calculates the arc tangent of the current value in the display area."
#~ msgstr "計算顯示區域之目前值的反正切。"

#~ msgid "Hyperbolic Tangent <literal>tanh</literal>"
#~ msgstr "雙曲正切 <literal>tanh</literal>"

#~ msgid ""
#~ "<guibutton>Tan</guibutton>, <guilabel>Hyp</guilabel> option selected, "
#~ "<guilabel>Inv</guilabel> option not selected"
#~ msgstr ""
#~ "未選取 <guibutton>Tan</guibutton>、<guilabel>Hyp</guilabel> 選項，未選取 "
#~ "<guilabel>Inv</guilabel> 選項"

#~ msgid ""
#~ "Calculates the hyperbolic tangent of the current value in the display "
#~ "area."
#~ msgstr "計算顯示區域之目前值的雙曲正切。"

#~ msgid "Arc Hyperbolic Tangent <literal>atanh</literal>"
#~ msgstr "反雙曲正切 <literal>atanh</literal>"

#~ msgid ""
#~ "<guibutton>Tan</guibutton>, <guilabel>Hyp</guilabel> option selected, "
#~ "<guilabel>Inv</guilabel> option selected"
#~ msgstr ""
#~ "未選取 <guibutton>Tan</guibutton>、<guilabel>Hyp</guilabel> 選項，未選取 "
#~ "<guilabel>Inv</guilabel> 選項"

#~ msgid ""
#~ "Calculates the arc hyperbolic tangent of the current value in the display "
#~ "area."
#~ msgstr "計算顯示區域之目前值的反雙曲正切。"

#~ msgid "To Calculate Logarithms"
#~ msgstr "計算對數"

#~ msgid ""
#~ "To calculate logarithms, use the buttons described in <xref linkend="
#~ "\"mate-calc-TBL-logs-calc\"/>."
#~ msgstr ""
#~ "如果要計算對數，請使用 <xref linkend=\"mate-calc-TBL-logs-calc\"/> 中所述"
#~ "的按鈕。"

#~ msgid "Calculating Logarithms"
#~ msgstr "計算對數"

#~ msgid "Common Logarithm Base 10"
#~ msgstr "常用對數基礎 10"

#~ msgid ""
#~ "Calculates the common logarithm of the current value in the display area."
#~ msgstr "計算顯示區域之目前值的常用對數。"

#~ msgid ""
#~ "Common antilogarithm and natural antilogarithm are not supported in this "
#~ "version of <application>mate-calc</application>."
#~ msgstr ""
#~ "這一版的 <application>Calculator</application> 不支援常用對數和自然對數。"

#~ msgid "To Perform Logical Calculations"
#~ msgstr "執行邏輯計算"

#~ msgid ""
#~ "To perform logical calculations, use the buttons described in <xref "
#~ "linkend=\"mate-calc-TBL-logic-calc\"/>."
#~ msgstr ""
#~ "如果要執行邏輯計算，請使用 <xref linkend=\"mate-calc-TBL-logic-calc\"/> 中"
#~ "所述的按鈕。"

#~ msgid "Performing Logical Calculations"
#~ msgstr "執行邏輯計算"

#~ msgid "Logical OR"
#~ msgstr "邏輯 OR"

#~ msgid ""
#~ "Performs a logical OR operation on the current value in the display area "
#~ "and the next number that you enter, treating both numbers as unsigned "
#~ "long integers."
#~ msgstr ""
#~ "對顯示區域的目前值和您輸入的下一個數字執行邏輯 OR 運算，兩者皆視為無符號長"
#~ "整數。"

#~ msgid "Logical AND"
#~ msgstr "邏輯 AND"

#~ msgid ""
#~ "Performs a logical AND operation on the current value in the display area "
#~ "and the next number that you enter, treating both numbers as unsigned "
#~ "long integers."
#~ msgstr ""
#~ "對顯示區域的目前值和您輸入的下一個數字執行邏輯 AND 運算，兩者皆視為無符號"
#~ "長整數。"

#~ msgid "Logical NOT"
#~ msgstr "邏輯 NOT"

#~ msgid ""
#~ "Performs a logical NOT operation on the current value in the display "
#~ "area, treating the number as an unsigned long integer."
#~ msgstr "對顯示區域的目前值執行邏輯 NOT 運算，並將數字視為無符號長整數。"

#~ msgid "Logical XOR"
#~ msgstr "邏輯 XOR"

#~ msgid ""
#~ "Performs a logical XOR operation on the current value in the display area "
#~ "and the next number that you enter, treating both numbers as unsigned "
#~ "long integers."
#~ msgstr ""
#~ "對顯示區域的目前值和您輸入的下一個數字執行邏輯 XOR 運算，兩者皆視為無符號"
#~ "長整數。"

#~ msgid "Logical XNOR"
#~ msgstr "邏輯 XNOR"

#~ msgid ""
#~ "Performs a logical XNOR operation on the current value in the display "
#~ "area and the next number that you enter, treating both numbers as "
#~ "unsigned long integers."
#~ msgstr ""
#~ "對顯示區域的目前值和您輸入的下一個數字執行邏輯 XNOR 運算，兩者皆視為無符號"
#~ "長整數。"

#~ msgid "To Enter Exponential Numbers"
#~ msgstr "輸入指數"

#~ msgid ""
#~ "To enter exponential numbers, use the <guibutton>Exp</guibutton> button."
#~ msgstr "如果要輸入指數字，請使用 <guibutton>Exp</guibutton> 按鈕。"

#~ msgid ""
#~ "The <guibutton>Exp</guibutton> button enables you to enter numbers in "
#~ "scientific notation, that is, <replaceable>mantissa</replaceable> * "
#~ "10<superscript><replaceable>exponent</replaceable></superscript>. The "
#~ "current non-zero value in the display area is the mantissa. If the "
#~ "current value in the display area is zero, the mantissa is 1.0. The next "
#~ "number that you enter is the exponent."
#~ msgstr ""
#~ "<guibutton>Exp</guibutton> 按鈕可以讓您使用科學記號輸入數字，即"
#~ "<replaceable>假數</replaceable> * 10<superscript><replaceable>指數</"
#~ "replaceable></superscript>。顯示區域中目前的非零值為假數。如果顯示區域的目"
#~ "前值為零，假數即為 1.0。您輸入的下一個數字則為指數。"

#~ msgid ""
#~ "When you click on <guibutton>Exp</guibutton>, the calculator displays "
#~ "<literal>. +</literal> to represent 10 to the power of the next number "
#~ "that you enter. To change the sign of the number, use the <guibutton>+/-</"
#~ "guibutton> button in the last action of the operation, as shown in the "
#~ "following example:"
#~ msgstr ""
#~ "當您按一下 <guibutton>Exp</guibutton> 時，計算機會顯示 <literal>。+</"
#~ "literal> 來表示 10 是您輸入之下一個數字的次方。如果要變更數字的符號，請在"
#~ "運算的最後一個步驟使用 <guibutton>+/-</guibutton> 按鈕，如下列範例所示："

#~ msgid "Keypad Entry"
#~ msgstr "數字鍵組輸入"

#~ msgid "Calculator Display"
#~ msgstr "計算機顯示"

#~ msgid ""
#~ "To enter a number in exponential format, use the guidelines in the "
#~ "following table:"
#~ msgstr "如果要以指數格式輸入數字，請按照下列表格的指示："

#~ msgid "Enter"
#~ msgstr "輸入"

#~ msgid "Number Displayed"
#~ msgstr "顯示的數字"

#~ msgid "To Use Constant Values"
#~ msgstr "使用定值"

#~ msgid ""
#~ "Click on <guibutton>Con</guibutton> to display the list of defined "
#~ "constant values. All constant values are specified in decimal numeric "
#~ "base, even if the current numeric base is not decimal."
#~ msgstr ""
#~ "按一下 <guibutton>Con</guibutton> 以顯示已定義定值的清單。所有定值都使用十"
#~ "進制數值基礎，即使目前的數值基礎並不是十進制。"

#~ msgid ""
#~ "Select a constant from the menu to enter its value in the display area. "
#~ "If you use the keyboard shortcut <keycap>#</keycap>, you can use the "
#~ "keyboard to specify the constant, as shown in the following example:"
#~ msgstr ""
#~ "請從功能表上選取一個常數，將它的值輸入顯示區域。如果您是使用鍵盤捷徑 "
#~ "<keycap>#</keycap>，您可以使用鍵盤來指定常數，如下列範例所示："

#~ msgid "Constant"
#~ msgstr "常數"

#~ msgid ""
#~ "The <application>mate-calc</application> application provides ten default "
#~ "constant values, as described in the following table:"
#~ msgstr ""
#~ "<application>Calculator</application> 應用程式提供 10 個預設定值，如下列表"
#~ "格所示："

#~ msgid "kilometers per hour or miles per hour"
#~ msgstr "每小時公里數或每小時英里數"

#~ msgid ""
#~ "Multiply the current value in the display area by this constant, to "
#~ "convert from kilometers per hour to miles per hour. For example, 8 * "
#~ "<guibutton>Con</guibutton><guilabel>C0</guilabel><keycap>=</keycap> 5."
#~ msgstr ""
#~ "將顯示區域的目前值乘上這個常數，將每小時公里數轉換為每小時英里數。例如，8 "
#~ "* <guibutton>Con</guibutton><guilabel>C0</guilabel><keycap>=</keycap> 5。"

#~ msgid ""
#~ "Divide the current value in the display area by this constant, to convert "
#~ "from miles per hour to kilometers per hour. For example, 5 / "
#~ "<guibutton>Con</guibutton><guilabel>C0</guilabel><keycap>=</keycap> 8."
#~ msgstr ""
#~ "將顯示區域的目前值除這個常數，將每小時英里數轉換為每小時公里數。例如，5 / "
#~ "<guibutton>Con</guibutton><guilabel>C0</guilabel><keycap>=</keycap> 8。"

#~ msgid "square root of 2"
#~ msgstr "2 的平方根"

#~ msgid ""
#~ "Multiply the current value in the display area by this constant, to "
#~ "convert from centimeters to inches. For example, 30 * <guibutton>Con</"
#~ "guibutton><guilabel>C4</guilabel><keycap>=</keycap> 12."
#~ msgstr ""
#~ "將顯示區域的目前值乘上這個常數，將公分轉換為英吋。例如，30 * "
#~ "<guibutton>Con</guibutton><guilabel>C4</guilabel><keycap>=</keycap> 12。"

#~ msgid ""
#~ "Divide the current value in the display area by this constant, to convert "
#~ "from inches to centimeters. For example, 12 / <guibutton>Con</"
#~ "guibutton><guilabel>C4</guilabel><keycap>=</keycap> 30."
#~ msgstr ""
#~ "將顯示區域的目前值除這個常數，將英吋轉換為公分。例如，12 / "
#~ "<guibutton>Con</guibutton><guilabel>C4</guilabel><keycap>=</keycap> 30。"

#~ msgid "degrees in a radian"
#~ msgstr "弧度角度"

#~ msgid "grams or ounces"
#~ msgstr "克或盎司"

#~ msgid ""
#~ "Multiply the current value in the display area by this constant, to "
#~ "convert from grams to ounces. For example, 500 * <guibutton>Con</"
#~ "guibutton><guilabel>C7</guilabel><keycap>=</keycap> 18."
#~ msgstr ""
#~ "將顯示區域的目前值乘上這個常數，將克轉換為盎司。例如，500 * "
#~ "<guibutton>Con</guibutton><guilabel>C7</guilabel><keycap>=</keycap> 18。"

#~ msgid ""
#~ "Divide the current value in the display area by this constant, to convert "
#~ "from ounces to grams. For example, 18 / <guibutton>Con</"
#~ "guibutton><guilabel>C7</guilabel><keycap>=</keycap> 500."
#~ msgstr ""
#~ "將顯示區域的目前值除這個常數，將盎司轉換為克。例如，18 / <guibutton>Con</"
#~ "guibutton><guilabel>C7</guilabel><keycap>=</keycap> 500。"

#~ msgid "kilojoules or British thermal units"
#~ msgstr "千焦耳或英國熱量單位"

#~ msgid ""
#~ "Multiply the current value in the display area by this constant, to "
#~ "convert from kilojoules to British thermal units. For example, 10 * "
#~ "<guibutton>Con</guibutton><guilabel>C8</guilabel><keycap>=</keycap> 9.48."
#~ msgstr ""
#~ "將顯示區域的目前值乘上這個常數，將千焦耳轉換為英國熱量單位。例如，10 * "
#~ "<guibutton>Con</guibutton><guilabel>C8</guilabel><keycap>=</keycap> 9.48。"

#~ msgid ""
#~ "Divide the current value in the display area by this constant, to convert "
#~ "from British thermal units to kilojoules. For example, 9.48 / "
#~ "<guibutton>Con</guibutton><guilabel>C8</guilabel><keycap>=</keycap> 10."
#~ msgstr ""
#~ "將顯示區域的目前值除這個常數，將英國熱量單位轉換為千焦耳。例如，9.48 / "
#~ "<guibutton>Con</guibutton><guilabel>C8</guilabel><keycap>=</keycap> 10。"

#~ msgid "cubic centimeters or cubic inches"
#~ msgstr "立方厘米或立方英吋"

#~ msgid ""
#~ "Multiply the current value in the display area by this constant, to "
#~ "convert from cubic centimeters to cubic inches. For example, 100 * "
#~ "<guibutton>Con</guibutton><guilabel>C9</guilabel><keycap>=</keycap> 6.10."
#~ msgstr ""
#~ "將顯示區域的目前值乘上這個常數，將立方厘米轉換為立方英吋。例如，100 * "
#~ "<guibutton>Con</guibutton><guilabel>C9</guilabel><keycap>=</keycap> 6.10。"

#~ msgid ""
#~ "Divide the current value in the display area by this constant, to convert "
#~ "from cubic inches to cubic centimeters. For example, 6.10 / "
#~ "<guibutton>Con</guibutton><guilabel>C9</guilabel><keycap>=</keycap> 100."
#~ msgstr ""
#~ "將顯示區域的目前值除這個常數，將立方厘米轉換為立方英吋。例如，6.10 / "
#~ "<guibutton>Con</guibutton><guilabel>C9</guilabel><keycap>=</keycap> 100。"

#~ msgid ""
#~ "You cannot add new constants in this version of <application>mate-calc</"
#~ "application>. However, you can overwrite the default constants to store "
#~ "your own constants."
#~ msgstr ""
#~ "您不可以在這一版的 <application>Calculator</application> 中增加新的常數。"
#~ "但是，您可以覆寫預設常數來儲存您自己的常數。"

#~ msgid ""
#~ "To store a new constant or edit an existing constant, perform the "
#~ "following steps:"
#~ msgstr "如果要儲存新常數或編輯現有的常數，請執行下列的步驟："

#~ msgid ""
#~ "Click on <guibutton>Con</guibutton> and select <guilabel>Edit Constants</"
#~ "guilabel> from the popup menu."
#~ msgstr ""
#~ "按一下 <guibutton>Con</guibutton>，然後選取即現式功能表上的<guilabel>編輯"
#~ "常數</guilabel>。"

#~ msgid ""
#~ "In the <guilabel>Edit Constants</guilabel> window, select the constant "
#~ "that you want to overwrite or edit."
#~ msgstr "在<guilabel>編輯常數</guilabel>視窗中，選取您要覆寫或編輯的常數。"

#~ msgid "Click on the Value field, and enter the new value."
#~ msgstr "按一下值欄位，然後輸入新的值。"

#~ msgid "Click on the Description field, and enter the new description."
#~ msgstr "按一下說明欄位，然後輸入新的說明。"

#~ msgid ""
#~ "Click <guibutton>OK</guibutton> to save your changes and close the "
#~ "<guilabel>Edit Constants</guilabel> window."
#~ msgstr ""
#~ "按一下<guibutton>確定</guibutton>以儲存您所作的變更並關閉<guilabel>編輯常"
#~ "數</guilabel>視窗。"

#~ msgid "To Use Functions"
#~ msgstr "使用函數"

#~ msgid ""
#~ "To show the available functions, click on <guibutton>Fun</guibutton>. A "
#~ "popup menu displays the list of defined functions. Select a function from "
#~ "the menu to run that function. If the function is not defined, the value "
#~ "zero is returned."
#~ msgstr ""
#~ "如果要顯示可用的函數，請按一下 <guibutton>Fun</guibutton>。即現式功能表會"
#~ "顯示已定義函數的清單。請從功能表選取函數以執行該函數。如果這個函數尚未定"
#~ "義，則會傳回零值。"

#~ msgid ""
#~ "If you use the keyboard shortcut <keycap>F</keycap>, you can use the "
#~ "keyboard to specify the function, as shown in the following example:"
#~ msgstr ""
#~ "如果您是使用鍵盤捷徑 <keycap>F</keycap>，您可以使用鍵盤來指定函數，如下列"
#~ "範例所示："

#~ msgid ""
#~ "The <application>mate-calc</application> application does not provide any "
#~ "default functions. You can store up to ten functions."
#~ msgstr ""
#~ "<application>Calculator</application> 應用程式不提供任何預設函數。您最多可"
#~ "以儲存 10 個函數。"

#~ msgid ""
#~ "To store a new function or edit an existing function, perform the "
#~ "following steps:"
#~ msgstr "如果要儲存新的函數或編輯現有的函數，請執行下列的步驟："

#~ msgid ""
#~ "Click on <guibutton>Fun</guibutton> and select <guilabel>Edit Functions</"
#~ "guilabel> from the popup menu."
#~ msgstr ""
#~ "按一下 <guibutton>Fun</guibutton>，然後選取即現式功能表上的 <guilabel>編輯"
#~ "函數</guilabel>。"

#~ msgid ""
#~ "In the <guilabel>Edit Functions</guilabel> window, select a blank entry, "
#~ "or the function that you want to overwrite."
#~ msgstr ""
#~ "在<guilabel>編輯函數</guilabel>視窗中，選取空的項目或是您要覆寫的函數。"

#~ msgid ""
#~ "Click on the Value field, and enter the new value. Use the keyboard "
#~ "shortcuts to invoke a <application>mate-calc</application> button. For "
#~ "example, enter <literal>90K</literal> to calculate sine(90)."
#~ msgstr ""
#~ "按一下值欄位，然後輸入新的值。使用鍵盤捷徑可以啟動 "
#~ "<application>Calculator</application> 按鈕。例如，輸入 <literal>90K</"
#~ "literal> 可以計算 sine(90)。"

#~ msgid ""
#~ "Click on the Description field, and enter the new description. For "
#~ "example, <literal>Sine 90</literal>."
#~ msgstr ""
#~ "按一下說明欄位，然後輸入新的說明。例如，<literal>Sine 90</literal>。"

#~ msgid ""
#~ "Click <guibutton>OK</guibutton> to save your changes and close the "
#~ "<guilabel>Edit Functions</guilabel> window."
#~ msgstr ""
#~ "按一下<guibutton>確定</guibutton>以儲存您所作的變更並關閉<guilabel>編輯函"
#~ "數</guilabel>視窗。"

#~ msgid "To Manipulate Binary Numbers"
#~ msgstr "處理二進制數字"

#~ msgid ""
#~ "To manipulate binary numbers, use the buttons described in <xref linkend="
#~ "\"mate-calc-TBL-num-manip\"/>."
#~ msgstr ""
#~ "如果要處理二進制數字，請使用 <xref linkend=\"mate-calc-TBL-num-manip\"/> "
#~ "中所述的按鈕。"

#~ msgid "Manipulating Binary Numbers"
#~ msgstr "處理二進制數字"

#~ msgid "Left Shift <replaceable>n</replaceable>"
#~ msgstr "左移 <replaceable>n</replaceable>"

#~ msgid ""
#~ "Shifts the current unsigned 32-bit binary value in the display area, the "
#~ "specified number of places to the left. Click on <guibutton>&lt;</"
#~ "guibutton>, and select the number of shift places from the popup menu. "
#~ "The number can be shifted up to 15 places left."
#~ msgstr ""
#~ "將顯示區域中目前的無符號 32 位元二進制值依指定的位數向左移。按一下 "
#~ "<guibutton>&lt;</guibutton>，然後選取即現式功能表上的移動位數。數字最多可"
#~ "以左移 15 位數。"

#~ msgid "111 <guibutton>&lt;</guibutton><guilabel>1 place</guilabel>"
#~ msgstr "111 <guibutton>&lt;</guibutton><guilabel>1 位數</guilabel>"

#~ msgid "Right Shift <replaceable>n</replaceable>"
#~ msgstr "右移 <replaceable>n</replaceable>"

#~ msgid ""
#~ "Shifts the current unsigned 32-bit binary value in the display area, the "
#~ "specified number of places to the right. Click on <guibutton>&gt;</"
#~ "guibutton>, and select the number of shift places from the popup menu. "
#~ "The number can be shifted up to 15 places right."
#~ msgstr ""
#~ "將顯示區域中目前的無符號 32 位元二進制值依指定的位數向右移。按一下 "
#~ "<guibutton>&gt;</guibutton>，然後選取即現式功能表上的移動位數。數字最多可"
#~ "以右移 15 位數。"

#~ msgid "1011 <guibutton>&gt;</guibutton><guilabel>1 place</guilabel>"
#~ msgstr "1011 <guibutton>&gt;</guibutton><guilabel>1 位數</guilabel>"

#~ msgid "Get a 16-Bit Unsigned Integer"
#~ msgstr "取得 16 位元無符號整數"

#~ msgid ""
#~ "Truncates the current value in the display area and returns a 16-bit "
#~ "unsigned integer."
#~ msgstr "將顯示區域的目前值截斷並傳回一個 16 位元無符號整數。"

#~ msgid "Get a 32-Bit Unsigned Integer"
#~ msgstr "取得 32 位元無符號整數"

#~ msgid ""
#~ "Truncates the current value in the display area and returns a 32-bit "
#~ "unsigned integer."
#~ msgstr "將顯示區域的目前值截斷並傳回一個 32 位元無符號整數。"

#~ msgid ""
#~ "If you use keyboard shortcuts, you can use the keyboard to specify the "
#~ "number of places to shift, as shown in the following examples:"
#~ msgstr ""
#~ "如果您是使用鍵盤捷徑，您可以使用鍵盤來指定要移動的位數，如下列範例所示："

#~ msgid ""
#~ "Shifts the current binary value in the display area 4 places to the left."
#~ msgstr "將顯示區域中目前的二進制值左移 4 位數。"

#~ msgid ""
#~ "Shifts the current binary value in the display area 4 places to the right."
#~ msgstr "將顯示區域中目前的二進制值右移 4 位數。"

#~ msgid "To Perform Miscellaneous Scientific Calculations"
#~ msgstr "執行其他的科學計算"

#~ msgid ""
#~ "To calculate miscellaneous scientific calculations, use the buttons "
#~ "described in <xref linkend=\"mate-calc-TBL-misc-calc\"/>."
#~ msgstr ""
#~ "如果要計算其他的科學計算，請使用 <xref linkend=\"mate-calc-TBL-misc-calc"
#~ "\"/> 中所述的按鈕。"

#~ msgid "Performing Miscellaneous Scientific Calculations"
#~ msgstr "執行其他的科學計算"

#~ msgid "Parentheses"
#~ msgstr "括號"

#~ msgid ""
#~ "Provide precedence in arithmetic calculations. Calculations within "
#~ "parentheses are performed first. If parentheses are not used, arithmetic "
#~ "calculations are performed from left to right with no arithmetic "
#~ "precedence. Parentheses can be nested to any level. When the last "
#~ "parenthesis is matched, the display area is updated."
#~ msgstr ""
#~ "提供算術計算中的優先順序。括號內的算式會優先執行。如果沒有使用括號，算術計"
#~ "算將從左至右執行沒有優先順序。括號可以嵌套的層數不限。當最後一個括號相符"
#~ "時，即更新顯示區域。"

#~ msgid "e to the <replaceable>x</replaceable> Power"
#~ msgstr "e 的 <replaceable>x</replaceable> 次方"

#~ msgid ""
#~ "Calculates the value of <literal>e</literal> raised to the power of the "
#~ "current value in the display area."
#~ msgstr "計算顯示區域之目前值其 <literal>e</literal> 的次方值。"

#, fuzzy
#~ msgid "10 to the <replaceable>x</replaceable> Power"
#~ msgstr ""
#~ "#-#-#-#-#  zh_TW-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "10 的 <replaceable>x</replaceable> 次方\n"
#~ "#-#-#-#-#  zh_TW-mate-calc.po (PACKAGE VERSION)  #-#-#-#-#\n"
#~ "10 是 <replaceable>x</replaceable> 次方"

#~ msgid ""
#~ "Calculates the value of 10 raised to the power of the current value in "
#~ "the display area."
#~ msgstr "計算顯示區域之目前值其 10 的次方值。"

#~ msgid "y to the <replaceable>x</replaceable> Power"
#~ msgstr "y 的 <replaceable>x</replaceable> 次方"

#~ msgid ""
#~ "Raises the current value in the display area to the power of the next "
#~ "value that you enter."
#~ msgstr "將顯示區域的目前值作為您輸入之下一個值的次方。"

#~ msgid "<replaceable>x</replaceable> Factorial"
#~ msgstr "<replaceable>x</replaceable> 階乘"

#~ msgid ""
#~ "Calculates the factorial of the current value in the display area. "
#~ "<replaceable>x</replaceable> factorial is <replaceable>x</replaceable>*"
#~ "(<replaceable>x</replaceable>-1)*(<replaceable>x</replaceable>-2)...*1. "
#~ "This function applies only to positive integers."
#~ msgstr ""
#~ "計算顯示區域之目前值的階乘。<replaceable>x</replaceable> 階乘為 "
#~ "<replaceable>x</replaceable>*(<replaceable>x</replaceable>-1)*"
#~ "(<replaceable>x</replaceable>-2)...*1。這個函數只可套用於正整數。"

#~ msgid "Random Number Generator"
#~ msgstr "亂數產生器"

#~ msgid ""
#~ "Generates a random number in the range 0.0 to 1.0 and displays the random "
#~ "number in the display area."
#~ msgstr "隨機產生一個 0.0 到 1.0 範圍之間的數字並在顯示區域中顯示該數字。"

#~ msgid "Hexadecimal Numerals"
#~ msgstr "十六進制數字"

#~ msgid "<guibutton>A</guibutton> to <guibutton>E</guibutton> inclusive"
#~ msgstr "<guibutton>A</guibutton> 到 <guibutton>E</guibutton> 以內的數值"

#~ msgid "These numerals are available in hexadecimal base only."
#~ msgstr "這些數字只可用於十六進制基礎。"

#~ msgid "To Quit"
#~ msgstr "結束"

#~ msgid ""
#~ "To quit <application>mate-calc</application>, choose "
#~ "<menuchoice><guimenu>Calculator</guimenu><guimenuitem>Quit</guimenuitem></"
#~ "menuchoice>."
#~ msgstr ""
#~ "如果要結束 <application>Calculator</application>，請選擇 "
#~ "<menuchoice><guimenu>計算機</guimenu><guimenuitem>結束</guimenuitem></"
#~ "menuchoice>。"

#~ msgid ""
#~ "When you quit <application>mate-calc</application>, the current values of "
#~ "the following settings are stored and automatically applied the next time "
#~ "you start <application>mate-calc</application>:"
#~ msgstr ""
#~ "當您結束 <application>Calculator</application> 時，即會儲存下列設定目前的"
#~ "值並在下次啟動 <application>Calculator</application> 時自動套用："

#~ msgid ""
#~ "Mode: <link linkend=\"mate-calc-basic-mode\">Basic</link>, <link linkend="
#~ "\"mate-calc-financial-mode\">Financial</link>, or <link linkend="
#~ "\"mate-calc-scientific-mode\">Scientific</link>"
#~ msgstr ""
#~ "模式：<link linkend=\"mate-calc-basic-mode\">基本</link>、<link linkend="
#~ "\"mate-calc-financial-mode\">財務</link>或<link linkend=\"mate-calc-"
#~ "scientific-mode\">科學</link>"

#~ msgid ""
#~ "<link linkend=\"mate-calc-mem-reg\">Memory Registers window</link> "
#~ "displayed or not displayed"
#~ msgstr ""
#~ "<link linkend=\"mate-calc-mem-reg\">記憶體註冊視窗</link>顯示或未顯示"

#~ msgid "Display type"
#~ msgstr "顯示類型"

#~ msgid "Technical Information"
#~ msgstr "技術資訊"

#~ msgid "Order of Operations"
#~ msgstr "運算順序"

#~ msgid ""
#~ "Calculations are performed from left to right with no arithmetic "
#~ "precedence. To apply arithmetic precedence, use parentheses."
#~ msgstr ""
#~ "從左至右執行計算，沒有算術 優先順序。如果要套用算術 優先順序，請使用括號。"

#~ msgid ""
#~ "For example, without parentheses: <screen><literal>2 + 3 * 4 = 20 </"
#~ "literal></screen>"
#~ msgstr ""
#~ "例如，當沒有使用括號時： <screen><literal>2 + 3 * 4 = 20 </literal></"
#~ "screen>"

#~ msgid ""
#~ "With parentheses: <screen><literal>2 + (3 * 4) = 14</literal></screen>"
#~ msgstr "使用括號時： <screen><literal>2 + (3 * 4) = 14</literal></screen>"

#~ msgid "Error Conditions"
#~ msgstr "錯誤狀況"

#~ msgid "Displays the word <literal>Error</literal> in the display area."
#~ msgstr "在顯示區域中顯示 <literal>Error</literal> 一字。"

#~ msgid ""
#~ "Makes all calculator buttons unavailable, except <guibutton>Clr</"
#~ "guibutton>."
#~ msgstr "使所有的計算機按鈕無法使用，<guibutton>Clr</guibutton> 除外。"

#~ msgid "Makes all calculator options unavailable."
#~ msgstr "使所有的計算機選項無法使用。"

#~ msgid ""
#~ "Makes all calculator menu items unavailable, except "
#~ "<menuchoice><guimenu>Calculator</guimenu><guimenuitem>Quit</guimenuitem></"
#~ "menuchoice> and <menuchoice><guimenu>Help</guimenu><guimenuitem>Contents</"
#~ "guimenuitem></menuchoice>."
#~ msgstr ""
#~ "使所有的計算機功能表項目無法使用，<menuchoice><guimenu>計算機</"
#~ "guimenu><guimenuitem>結束</guimenuitem></menuchoice>和"
#~ "<menuchoice><guimenu>說明</guimenu><guimenuitem>內容</guimenuitem></"
#~ "menuchoice> 除外。"

#~ msgid ""
#~ "If you perform an invalid calculation, <application>mate-calc</"
#~ "application> indicates the error condition as follows: <placeholder-1/>"
#~ msgstr ""
#~ "如果您執行一個無效的計算，<application>Calculator</application> 會指出下列"
#~ "的錯誤狀況： <placeholder-1/>"

#~ msgid "To Change the Input Mode"
#~ msgstr "變更輸入模式"

#~ msgid ""
#~ "To change the input mode, right-click in the text window, then select "
#~ "<guimenuitem>Input Methods</guimenuitem>."
#~ msgstr ""
#~ "如果要變更輸入模式，請在文字視窗上按滑鼠右鍵，然後選取 <guimenuitem>輸入方"
#~ "法</guimenuitem>。"

#~ msgid "Quick Reference: Keyboard Shortcuts"
#~ msgstr "快速參考：鍵盤捷徑"

#~ msgid ""
#~ "<xref linkend=\"mate-calc-TBL-keyboard-shortcut-button\"/>, <xref linkend="
#~ "\"mate-calc-TBL-keyboard-shortcut-sci-options\"/>, and <xref linkend="
#~ "\"mate-calc-TBL-keyboard-shortcut-menu\"/> provide a quick reference for "
#~ "all of the <application>mate-calc</application> keyboard shortcuts."
#~ msgstr ""
#~ "<xref linkend=\"mate-calc-TBL-keyboard-shortcut-button\"/>、<xref linkend="
#~ "\"mate-calc-TBL-keyboard-shortcut-sci-options\"/> 和 <xref linkend="
#~ "\"mate-calc-TBL-keyboard-shortcut-menu\"/> 提供了所有 "
#~ "<application>Calculator</application> 鍵盤捷徑的快速參考。"

#~ msgid ""
#~ "Quick Reference for Keyboard Shortcuts of <application>mate-calc</"
#~ "application> Buttons"
#~ msgstr "<application>Calculator</application> 按鈕之鍵盤捷徑的快速參考"

#~ msgid "Keyboard Shortcut"
#~ msgstr "鍵盤捷徑"

#~ msgid "See"
#~ msgstr "請參閱"

#~ msgid "<keycap>0</keycap> to <keycap>9</keycap> inclusive"
#~ msgstr "<keycap>0</keycap> 到 <keycap>9</keycap> 以內的數字"

#~ msgid "Exponential"
#~ msgstr "指數"

#~ msgid "Constant Value"
#~ msgstr "定值"

#~ msgid ":"
#~ msgstr "："

#~ msgid "<keycap>=</keycap> or <keycap>Return</keycap>"
#~ msgstr "<keycap>=</keycap> 或 <keycap>Return</keycap>"

#~ msgid ""
#~ "Quick Reference for Keyboard Shortcuts of <application>mate-calc</"
#~ "application> Scientific Mode Options"
#~ msgstr ""
#~ "<application>Calculator</application> 科學模式選項之鍵盤捷徑的快速參考"

#~ msgid "Option"
#~ msgstr "選項"

#~ msgid "Set the trigonometric type to Gradients."
#~ msgstr "將三角類型設為斜度。"

#~ msgid "Set the numeric base to binary."
#~ msgstr "將數值基礎設為二進制。"

#~ msgid "Set the numeric base to decimal."
#~ msgstr "將數值基礎設為十進制。"

#~ msgid "Set the display type to Fixed-Point format."
#~ msgstr "將顯示類型設為定點格式。"

#~ msgid "Set the trigonometric type to Degrees."
#~ msgstr "將三角類型設為角度。"

#~ msgid "Select the inverse option for use with the trigonometric functions."
#~ msgstr "選取三角函數使用的反三角選項。"

#~ msgid "Set the display type to Engineering format."
#~ msgstr "將顯示類型設為工程格式。"

#~ msgid "Set the numeric base to octal."
#~ msgstr "將數值基礎設為八進制。"

#~ msgid "Set the trigonometric type to Radians."
#~ msgstr "將三角類型設為弧度。"

#~ msgid "Set the display type to Scientific format."
#~ msgstr "將顯示類型設為科學格式。"

#~ msgid "Set the numeric base to hexadecimal."
#~ msgstr "將數值基礎設為十六進制。"

#~ msgid ""
#~ "Select the hyperbolic option for use with the trigonometric functions."
#~ msgstr "選取三角函數使用的雙曲線選項。"

#~ msgid ""
#~ "Quick Reference for Keyboard Shortcuts of <application>mate-calc</"
#~ "application> Menu Items"
#~ msgstr ""
#~ "<application>Calculator</application> 功能表項目之鍵盤捷徑的快速參考"

#~ msgid "Menu Item"
#~ msgstr "功能表項目"

#~ msgid "View"
#~ msgstr "檢視"

#~ msgid "Change to Basic Mode"
#~ msgstr "變更為基本模式"

#~ msgid "Edit"
#~ msgstr "編輯"

#~ msgid "Copy"
#~ msgstr "複製"

#~ msgid "Copy the current value in the display area to the clipboard"
#~ msgstr "將顯示區域的目前值複製到剪貼簿。"

#~ msgid "Change to Financial Mode"
#~ msgstr "變更為財務模式"

#~ msgid "Insert ASCII Values"
#~ msgstr "插入 ASCII 值"

#~ msgid "Display the <guilabel>Insert ASCII Values</guilabel> window"
#~ msgstr "顯示<guilabel>插入 ASCII 值</guilabel>視窗"

#~ msgid "Memory Registers"
#~ msgstr "記憶體註冊"

#~ msgid "Display the <guilabel>Memory Registers</guilabel> window"
#~ msgstr "顯示<guilabel>記憶體註冊</guilabel>視窗"

#~ msgid "Quit"
#~ msgstr "結束"

#~ msgid "Quit the <application>mate-calc</application> application"
#~ msgstr "結束 <application>Calculator</application> 應用程式"

#~ msgid "Change to Scientific Mode"
#~ msgstr "變更為科學模式"

#~ msgid "Show Trailing Zeroes"
#~ msgstr "顯示尾隨的零"

#~ msgid "Show trailing zeroes"
#~ msgstr "顯示尾隨的零"

#~ msgid "Paste"
#~ msgstr "貼上"

#~ msgid "Paste the current value in the clipboard to the display area"
#~ msgstr "將顯示區域的目前值貼入剪貼簿"

#~ msgid "Help"
#~ msgstr "說明"

#~ msgid "Display the <application>mate-calc</application> online help"
#~ msgstr "顯示 <application>Calculator</application> 線上說明"

#~ msgid ""
#~ "Permission is granted to copy, distribute and/or modify this document "
#~ "under the terms of the GNU Free Documentation License (GFDL), Version 1.1 "
#~ "or any later version published by the Free Software Foundation with no "
#~ "Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. You "
#~ "can find a copy of the GFDL at this <ulink type=\"help\" url=\"help:fdl"
#~ "\">link</ulink> or in the file COPYING-DOCS distributed with this manual."
#~ msgstr ""
#~ "根據自由軟體基金會 (Free Software Foundation) 所發佈 的 GNU 自由文件授權 "
#~ "(GNU Free Documentation License, GFDL) 1.1 (含) 以後版本， 使用者可以複"
#~ "製、散佈，或修改本文件，但不得增刪章節，不得加上封面文字， 亦不得加上封底"
#~ "文字。 如要取得 GFDL 的副本，請參閱 此<ulink type=\"help\" url=\"help:fdl"
#~ "\">連結</ulink>，或是參閱與本手冊一同隨附的 COPYING-DOCS 檔案。"

#~ msgid ""
#~ "This manual is part of a collection of MATE manuals distributed under "
#~ "the GFDL. If you want to distribute this manual separately from the "
#~ "collection, you can do so by adding a copy of the license to the manual, "
#~ "as described in section 6 of the license."
#~ msgstr ""
#~ "本手冊是屬於依 GFDL 授權所發佈之 MATE 手冊集中的一部份。 如果您只要單獨散"
#~ "佈本手冊，依據授權聲明第六節之敘述， 您必須另外將授權聲明加入本手冊中。"

#~ msgid ""
#~ "Many of the names used by companies to distinguish their products and "
#~ "services are claimed as trademarks. Where those names appear in any MATE "
#~ "documentation, and the members of the MATE Documentation Project are "
#~ "made aware of those trademarks, then the names are in capital letters or "
#~ "initial capital letters."
#~ msgstr ""
#~ "許多公司為了突顯其產品與服務，會使用特別名稱，並亦已聲明這些 名稱為其商"
#~ "標。當這些名稱出現在 MATE 文件中，同時 MATE 文件 專案小組成員亦明白這些"
#~ "名稱為商標時， 這些名稱會以大寫字母或是首字母大寫表示。"

#~ msgid ""
#~ "DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS, WITHOUT WARRANTY OF ANY KIND, "
#~ "EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES "
#~ "THAT THE DOCUMENT OR MODIFIED VERSION OF THE DOCUMENT IS FREE OF DEFECTS "
#~ "MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE "
#~ "RISK AS TO THE QUALITY, ACCURACY, AND PERFORMANCE OF THE DOCUMENT OR "
#~ "MODIFIED VERSION OF THE DOCUMENT IS WITH YOU. SHOULD ANY DOCUMENT OR "
#~ "MODIFIED VERSION PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL "
#~ "WRITER, AUTHOR OR ANY CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY "
#~ "SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES "
#~ "AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED "
#~ "VERSION OF THE DOCUMENT IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS "
#~ "DISCLAIMER; AND"
#~ msgstr ""
#~ "文件提供是以其「原樣」呈現，不管明示或暗示，皆不具任何 保證，包括 (但不限"
#~ "於) 文件或修正版毫無錯誤、可販售、 具特殊用途，或不侵權。 關於本文件與修正"
#~ "版文件之品質、正確性及功用， 其風險您必須自行承擔。 若本文件或修正版有任何"
#~ "缺陷，任何必須之保養，修理及更正， 應由您自行承擔，原始作者、作者或任何散"
#~ "佈者無須負責。 本免責聲明是本授權聲明極重要與必要的一部份，因此任何文件或 "
#~ "修正版的授權，皆須在同意本免責聲明的情況下進行；同時"

#~ msgid ""
#~ "UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN TORT "
#~ "(INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL THE AUTHOR, INITIAL "
#~ "WRITER, ANY CONTRIBUTOR, OR ANY DISTRIBUTOR OF THE DOCUMENT OR MODIFIED "
#~ "VERSION OF THE DOCUMENT, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE "
#~ "LIABLE TO ANY PERSON FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR "
#~ "CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, "
#~ "DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR "
#~ "MALFUNCTION, OR ANY AND ALL OTHER DAMAGES OR LOSSES ARISING OUT OF OR "
#~ "RELATING TO USE OF THE DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT, "
#~ "EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH "
#~ "DAMAGES."
#~ msgstr ""
#~ "在任何情況或法律理論下，亦即不管是在侵權 (包括疏忽)、契約或 其他情形，或是"
#~ "已預先告知會有下列損害之可能時，本文件 或修正版的任何作者、原始作者、投稿"
#~ "人以及散佈者，或是 任何提供單位，對於因使用本文件及修正版，或與本文件及 修"
#~ "正版使用相關所造成的任何直接、間接、特殊、偶然或必 然之損害，包括 (但不限"
#~ "於) 信譽受損、工作停止、電腦當 機或不正常運作，或任何所有其他損害，上述人"
#~ "等皆不需負 任何責任。"

#~ msgid ""
#~ "DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT ARE PROVIDED UNDER THE "
#~ "TERMS OF THE GNU FREE DOCUMENTATION LICENSE WITH THE FURTHER "
#~ "UNDERSTANDING THAT: <placeholder-1/>"
#~ msgstr ""
#~ "本文件及其修正版本的提供，是基於 GNU 自由文件授權聲明 的條款，同時亦有下列"
#~ "共識： <placeholder-1/>"