-Installation Instructions

-*************************

-

-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,

-2006, 2007 Free Software Foundation, Inc.

-

-This file is free documentation; the Free Software Foundation gives

-unlimited permission to copy, distribute and modify it.

-

-Basic Installation

-==================

-

-Briefly, the shell commands `./configure; make; make install' should

-configure, build, and install this package. The following

-more-detailed instructions are generic; see the `README' file for

-instructions specific to this package.

-

- The `configure' shell script attempts to guess correct values for

-various system-dependent variables used during compilation. It uses

-those values to create a `Makefile' in each directory of the package.

-It may also create one or more `.h' files containing system-dependent

-definitions. Finally, it creates a shell script `config.status' that

-you can run in the future to recreate the current configuration, and a

-file `config.log' containing compiler output (useful mainly for

-debugging `configure').

-

- It can also use an optional file (typically called `config.cache'

-and enabled with `--cache-file=config.cache' or simply `-C') that saves

-the results of its tests to speed up reconfiguring. Caching is

-disabled by default to prevent problems with accidental use of stale

-cache files.

-

- If you need to do unusual things to compile the package, please try

-to figure out how `configure' could check whether to do them, and mail

-diffs or instructions to the address given in the `README' so they can

-be considered for the next release. If you are using the cache, and at

-some point `config.cache' contains results you don't want to keep, you

-may remove or edit it.

-

- The file `configure.ac' (or `configure.in') is used to create

-`configure' by a program called `autoconf'. You need `configure.ac' if

-you want to change it or regenerate `configure' using a newer version

-of `autoconf'.

-

-The simplest way to compile this package is:

-

- 1. `cd' to the directory containing the package's source code and type

- `./configure' to configure the package for your system.

-

- Running `configure' might take a while. While running, it prints

- some messages telling which features it is checking for.

-

- 2. Type `make' to compile the package.

-

- 3. Optionally, type `make check' to run any self-tests that come with

- the package.

-

- 4. Type `make install' to install the programs and any data files and

- documentation.

-

- 5. You can remove the program binaries and object files from the

- source code directory by typing `make clean'. To also remove the

- files that `configure' created (so you can compile the package for

- a different kind of computer), type `make distclean'. There is

- also a `make maintainer-clean' target, but that is intended mainly

- for the package's developers. If you use it, you may have to get

- all sorts of other programs in order to regenerate files that came

- with the distribution.

-

- 6. Often, you can also type `make uninstall' to remove the installed

- files again.

-

-Compilers and Options

-=====================

-

-Some systems require unusual options for compilation or linking that the

-`configure' script does not know about. Run `./configure --help' for

-details on some of the pertinent environment variables.

-

- You can give `configure' initial values for configuration parameters

-by setting variables in the command line or in the environment. Here

-is an example:

-

- ./configure CC=c99 CFLAGS=-g LIBS=-lposix

-

- *Note Defining Variables::, for more details.

-

-Compiling For Multiple Architectures

-====================================

-

-You can compile the package for more than one kind of computer at the

-same time, by placing the object files for each architecture in their

-own directory. To do this, you can use GNU `make'. `cd' to the

-directory where you want the object files and executables to go and run

-the `configure' script. `configure' automatically checks for the

-source code in the directory that `configure' is in and in `..'.

-

- With a non-GNU `make', it is safer to compile the package for one

-architecture at a time in the source code directory. After you have

-installed the package for one architecture, use `make distclean' before

-reconfiguring for another architecture.

-

-Installation Names

-==================

-

-By default, `make install' installs the package's commands under

-`/usr/local/bin', include files under `/usr/local/include', etc. You

-can specify an installation prefix other than `/usr/local' by giving

-`configure' the option `--prefix=PREFIX'.

-

- You can specify separate installation prefixes for

-architecture-specific files and architecture-independent files. If you

-pass the option `--exec-prefix=PREFIX' to `configure', the package uses

-PREFIX as the prefix for installing programs and libraries.

-Documentation and other data files still use the regular prefix.

-

- In addition, if you use an unusual directory layout you can give

-options like `--bindir=DIR' to specify different values for particular

-kinds of files. Run `configure --help' for a list of the directories

-you can set and what kinds of files go in them.

-

- If the package supports it, you can cause programs to be installed

-with an extra prefix or suffix on their names by giving `configure' the

-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.

-

-Optional Features

-=================

-

-Some packages pay attention to `--enable-FEATURE' options to

-`configure', where FEATURE indicates an optional part of the package.

-They may also pay attention to `--with-PACKAGE' options, where PACKAGE

-is something like `gnu-as' or `x' (for the X Window System). The

-`README' should mention any `--enable-' and `--with-' options that the

-package recognizes.

-

- For packages that use the X Window System, `configure' can usually

-find the X include and library files automatically, but if it doesn't,

-you can use the `configure' options `--x-includes=DIR' and

-`--x-libraries=DIR' to specify their locations.

-

-Specifying the System Type

-==========================

-

-There may be some features `configure' cannot figure out automatically,

-but needs to determine by the type of machine the package will run on.

-Usually, assuming the package is built to be run on the _same_

-architectures, `configure' can figure that out, but if it prints a

-message saying it cannot guess the machine type, give it the

-`--build=TYPE' option. TYPE can either be a short name for the system

-type, such as `sun4', or a canonical name which has the form:

-

- CPU-COMPANY-SYSTEM

-

-where SYSTEM can have one of these forms:

-

- OS KERNEL-OS

-

- See the file `config.sub' for the possible values of each field. If

-`config.sub' isn't included in this package, then this package doesn't

-need to know the machine type.

-

- If you are _building_ compiler tools for cross-compiling, you should

-use the option `--target=TYPE' to select the type of system they will

-produce code for.

-

- If you want to _use_ a cross compiler, that generates code for a

-platform different from the build platform, you should specify the

-"host" platform (i.e., that on which the generated programs will

-eventually be run) with `--host=TYPE'.

-

-Sharing Defaults

-================

-

-If you want to set default values for `configure' scripts to share, you

-can create a site shell script called `config.site' that gives default

-values for variables like `CC', `cache_file', and `prefix'.

-`configure' looks for `PREFIX/share/config.site' if it exists, then

-`PREFIX/etc/config.site' if it exists. Or, you can set the

-`CONFIG_SITE' environment variable to the location of the site script.

-A warning: not all `configure' scripts look for a site script.

-

-Defining Variables

-==================

-

-Variables not defined in a site shell script can be set in the

-environment passed to `configure'. However, some packages may run

-configure again during the build, and the customized values of these

-variables may be lost. In order to avoid this problem, you should set

-them in the `configure' command line, using `VAR=value'. For example:

-

- ./configure CC=/usr/local2/bin/gcc

-

-causes the specified `gcc' to be used as the C compiler (unless it is

-overridden in the site shell script).

-

-Unfortunately, this technique does not work for `CONFIG_SHELL' due to

-an Autoconf bug. Until the bug is fixed you can use this workaround:

-

- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash

-

-`configure' Invocation

-======================

-

-`configure' recognizes the following options to control how it operates.

-

-`--help'

-`-h'

- Print a summary of the options to `configure', and exit.

-

-`--version'

-`-V'

- Print the version of Autoconf used to generate the `configure'

- script, and exit.

-

-`--cache-file=FILE'

- Enable the cache: use and save the results of the tests in FILE,

- traditionally `config.cache'. FILE defaults to `/dev/null' to

- disable caching.

-

-`--config-cache'

-`-C'

- Alias for `--cache-file=config.cache'.

-

-`--quiet'

-`--silent'

-`-q'

- Do not print messages saying which checks are being made. To

- suppress all normal output, redirect it to `/dev/null' (any error

- messages will still be shown).

-

-`--srcdir=DIR'

- Look for the package's source code in directory DIR. Usually

- `configure' can determine that directory automatically.

-

-`configure' also accepts some other, not widely useful, options. Run

-`configure --help' for more details.

-

- mate-common.doap \

-# Makefile.in generated by automake 1.11.1 from Makefile.am.

-# @configure_input@

-

-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,

-# Inc.

-# This Makefile.in is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# This program is distributed in the hope that it will be useful,

-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

-# PARTICULAR PURPOSE.

-

-@SET_MAKE@

-VPATH = @srcdir@

-pkgdatadir = $(datadir)/@PACKAGE@

-pkgincludedir = $(includedir)/@PACKAGE@

-pkglibdir = $(libdir)/@PACKAGE@

-pkglibexecdir = $(libexecdir)/@PACKAGE@

-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

-install_sh_DATA = $(install_sh) -c -m 644

-install_sh_PROGRAM = $(install_sh) -c

-install_sh_SCRIPT = $(install_sh) -c

-INSTALL_HEADER = $(INSTALL_DATA)

-transform = $(program_transform_name)

-NORMAL_INSTALL = :

-PRE_INSTALL = :

-POST_INSTALL = :

-NORMAL_UNINSTALL = :

-PRE_UNINSTALL = :

-POST_UNINSTALL = :

-subdir = .

-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \

- $(srcdir)/Makefile.in $(srcdir)/mate-common.spec.in \

- $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \

- install-sh missing

-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

-am__aclocal_m4_deps = $(top_srcdir)/configure.in

-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

- $(ACLOCAL_M4)

-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \

- configure.lineno config.status.lineno

-mkinstalldirs = $(install_sh) -d

-CONFIG_CLEAN_FILES = mate-common.spec

-CONFIG_CLEAN_VPATH_FILES =

-AM_V_GEN = $(am__v_GEN_$(V))

-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))

-am__v_GEN_0 = @echo " GEN " $@;

-AM_V_at = $(am__v_at_$(V))

-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))

-am__v_at_0 = @

-SOURCES =

-DIST_SOURCES =

-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \

- html-recursive info-recursive install-data-recursive \

- install-dvi-recursive install-exec-recursive \

- install-html-recursive install-info-recursive \

- install-pdf-recursive install-ps-recursive install-recursive \

- installcheck-recursive installdirs-recursive pdf-recursive \

- ps-recursive uninstall-recursive

-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \

- distclean-recursive maintainer-clean-recursive

-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \

- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \

- distdir dist dist-all distcheck

-ETAGS = etags

-CTAGS = ctags

-DIST_SUBDIRS = $(SUBDIRS)

-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

-distdir = $(PACKAGE)-$(VERSION)

-top_distdir = $(distdir)

-am__remove_distdir = \

- { test ! -d "$(distdir)" \

- || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \

- && rm -fr "$(distdir)"; }; }

-am__relativize = \

- dir0=`pwd`; \

- sed_first='s,^\([^/]*\)/.*$$,\1,'; \

- sed_rest='s,^[^/]*/*,,'; \

- sed_last='s,^.*/\([^/]*\)$$,\1,'; \

- sed_butlast='s,/*[^/]*$$,,'; \

- while test -n "$$dir1"; do \

- first=`echo "$$dir1" | sed -e "$$sed_first"`; \

- if test "$$first" != "."; then \

- if test "$$first" = ".."; then \

- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \

- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \

- else \

- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \

- if test "$$first2" = "$$first"; then \

- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \

- else \

- dir2="../$$dir2"; \

- fi; \

- dir0="$$dir0"/"$$first"; \

- fi; \

- fi; \

- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \

- done; \

- reldir="$$dir2"

-GZIP_ENV = --best

-DIST_ARCHIVES = $(distdir).tar.bz2

-distuninstallcheck_listfiles = find . -type f -print

-distcleancheck_listfiles = find . -type f -print

-ACLOCAL = @ACLOCAL@

-AMTAR = @AMTAR@

-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@

-AUTOCONF = @AUTOCONF@

-AUTOHEADER = @AUTOHEADER@

-AUTOMAKE = @AUTOMAKE@

-AWK = @AWK@

-CYGPATH_W = @CYGPATH_W@

-DEFS = @DEFS@

-ECHO_C = @ECHO_C@

-ECHO_N = @ECHO_N@

-ECHO_T = @ECHO_T@

-INSTALL = @INSTALL@

-INSTALL_DATA = @INSTALL_DATA@

-INSTALL_PROGRAM = @INSTALL_PROGRAM@

-INSTALL_SCRIPT = @INSTALL_SCRIPT@

-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

-LIBOBJS = @LIBOBJS@

-LIBS = @LIBS@

-LTLIBOBJS = @LTLIBOBJS@

-MAINT = @MAINT@

-MAKEINFO = @MAKEINFO@

-MKDIR_P = @MKDIR_P@

-PACKAGE = @PACKAGE@

-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

-PACKAGE_NAME = @PACKAGE_NAME@

-PACKAGE_STRING = @PACKAGE_STRING@

-PACKAGE_TARNAME = @PACKAGE_TARNAME@

-PACKAGE_URL = @PACKAGE_URL@

-PACKAGE_VERSION = @PACKAGE_VERSION@

-PATH_SEPARATOR = @PATH_SEPARATOR@

-SET_MAKE = @SET_MAKE@

-SHELL = @SHELL@

-STRIP = @STRIP@

-VERSION = @VERSION@

-abs_builddir = @abs_builddir@

-abs_srcdir = @abs_srcdir@

-abs_top_builddir = @abs_top_builddir@

-abs_top_srcdir = @abs_top_srcdir@

-am__leading_dot = @am__leading_dot@

-am__tar = @am__tar@

-am__untar = @am__untar@

-bindir = @bindir@

-build_alias = @build_alias@

-builddir = @builddir@

-datadir = @datadir@

-datarootdir = @datarootdir@

-docdir = @docdir@

-dvidir = @dvidir@

-exec_prefix = @exec_prefix@

-host_alias = @host_alias@

-htmldir = @htmldir@

-includedir = @includedir@

-infodir = @infodir@

-install_sh = @install_sh@

-libdir = @libdir@

-libexecdir = @libexecdir@

-localedir = @localedir@

-localstatedir = @localstatedir@

-mandir = @mandir@

-mkdir_p = @mkdir_p@

-oldincludedir = @oldincludedir@

-pdfdir = @pdfdir@

-prefix = @prefix@

-program_transform_name = @program_transform_name@

-psdir = @psdir@

-sbindir = @sbindir@

-sharedstatedir = @sharedstatedir@

-srcdir = @srcdir@

-sysconfdir = @sysconfdir@

-target_alias = @target_alias@

-top_build_prefix = @top_build_prefix@

-top_builddir = @top_builddir@

-top_srcdir = @top_srcdir@

-SUBDIRS = macros2 doc-build

-EXTRA_DIST = \

- autogen.sh \

- mate-common.doap \

- mate-common.spec \

- mate-common.spec.in \

- doc/usage.txt \

- ChangeLog.pre-git

-

-DISTCHECK_CONFIGURE_FLAGS = --disable-silent-rules

-all: all-recursive

-

-.SUFFIXES:

-am--refresh:

- @:

-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)

- @for dep in $?; do \

- case '$(am__configure_deps)' in \

- *$$dep*) \

- echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \

- $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \

- && exit 0; \

- exit 1;; \

- esac; \

- done; \

- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \

- $(am__cd) $(top_srcdir) && \

- $(AUTOMAKE) --foreign Makefile

-.PRECIOUS: Makefile

-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

- @case '$?' in \

- *config.status*) \

- echo ' $(SHELL) ./config.status'; \

- $(SHELL) ./config.status;; \

- *) \

- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \

- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \

- esac;

-

-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

- $(SHELL) ./config.status --recheck

-

-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)

- $(am__cd) $(srcdir) && $(AUTOCONF)

-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)

- $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

-$(am__aclocal_m4_deps):

-mate-common.spec: $(top_builddir)/config.status $(srcdir)/mate-common.spec.in

- cd $(top_builddir) && $(SHELL) ./config.status $@

-

-# This directory's subdirectories are mostly independent; you can cd

-# into them and run `make' without going through this Makefile.

-# To change the values of `make' variables: instead of editing Makefiles,

-# (1) if the variable is set in `config.status', edit `config.status'

-# (which will cause the Makefiles to be regenerated when you run `make');

-# (2) otherwise, pass the desired values on the `make' command line.

-$(RECURSIVE_TARGETS):

- @fail= failcom='exit 1'; \

- for f in x $$MAKEFLAGS; do \

- case $$f in \

- *=* | --[!k]*);; \

- *k*) failcom='fail=yes';; \

- esac; \

- done; \

- dot_seen=no; \

- target=`echo $@ | sed s/-recursive//`; \

- list='$(SUBDIRS)'; for subdir in $$list; do \

- echo "Making $$target in $$subdir"; \

- if test "$$subdir" = "."; then \

- dot_seen=yes; \

- local_target="$$target-am"; \

- else \

- local_target="$$target"; \

- fi; \

- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

- || eval $$failcom; \

- done; \

- if test "$$dot_seen" = "no"; then \

- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \

- fi; test -z "$$fail"

-

-$(RECURSIVE_CLEAN_TARGETS):

- @fail= failcom='exit 1'; \

- for f in x $$MAKEFLAGS; do \

- case $$f in \

- *=* | --[!k]*);; \

- *k*) failcom='fail=yes';; \

- esac; \

- done; \

- dot_seen=no; \

- case "$@" in \

- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \

- *) list='$(SUBDIRS)' ;; \

- esac; \

- rev=''; for subdir in $$list; do \

- if test "$$subdir" = "."; then :; else \

- rev="$$subdir $$rev"; \

- fi; \

- done; \

- rev="$$rev ."; \

- target=`echo $@ | sed s/-recursive//`; \

- for subdir in $$rev; do \

- echo "Making $$target in $$subdir"; \

- if test "$$subdir" = "."; then \

- local_target="$$target-am"; \

- else \

- local_target="$$target"; \

- fi; \

- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

- || eval $$failcom; \

- done && test -z "$$fail"

-tags-recursive:

- list='$(SUBDIRS)'; for subdir in $$list; do \

- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \

- done

-ctags-recursive:

- list='$(SUBDIRS)'; for subdir in $$list; do \

- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \

- done

-

-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)

- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

- unique=`for i in $$list; do \

- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

- done | \

- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

- END { if (nonempty) { for (i in files) print i; }; }'`; \

- mkid -fID $$unique

-tags: TAGS

-

-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \

- $(TAGS_FILES) $(LISP)

- set x; \

- here=`pwd`; \

- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \

- include_option=--etags-include; \

- empty_fix=.; \

- else \

- include_option=--include; \

- empty_fix=; \

- fi; \

- list='$(SUBDIRS)'; for subdir in $$list; do \

- if test "$$subdir" = .; then :; else \

- test ! -f $$subdir/TAGS || \

- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \

- fi; \

- done; \

- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

- unique=`for i in $$list; do \

- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

- done | \

- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

- END { if (nonempty) { for (i in files) print i; }; }'`; \

- shift; \

- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \

- test -n "$$unique" || unique=$$empty_fix; \

- if test $$# -gt 0; then \

- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

- "$$@" $$unique; \

- else \

- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

- $$unique; \

- fi; \

- fi

-ctags: CTAGS

-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \

- $(TAGS_FILES) $(LISP)

- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

- unique=`for i in $$list; do \

- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

- done | \

- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

- END { if (nonempty) { for (i in files) print i; }; }'`; \

- test -z "$(CTAGS_ARGS)$$unique" \

- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \

- $$unique

-

-GTAGS:

- here=`$(am__cd) $(top_builddir) && pwd` \

- && $(am__cd) $(top_srcdir) \

- && gtags -i $(GTAGS_ARGS) "$$here"

-

-distclean-tags:

- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

-

-distdir: $(DISTFILES)

- $(am__remove_distdir)

- test -d "$(distdir)" || mkdir "$(distdir)"

- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

- list='$(DISTFILES)'; \

- dist_files=`for file in $$list; do echo $$file; done | \

- sed -e "s|^$$srcdirstrip/||;t" \

- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

- case $$dist_files in \

- */*) $(MKDIR_P) `echo "$$dist_files" | \

- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

- sort -u` ;; \

- esac; \

- for file in $$dist_files; do \

- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

- if test -d $$d/$$file; then \

- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

- if test -d "$(distdir)/$$file"; then \

- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

- fi; \

- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

- fi; \

- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

- else \

- test -f "$(distdir)/$$file" \

- || cp -p $$d/$$file "$(distdir)/$$file" \

- || exit 1; \

- fi; \

- done

- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \

- if test "$$subdir" = .; then :; else \

- test -d "$(distdir)/$$subdir" \

- || $(MKDIR_P) "$(distdir)/$$subdir" \

- || exit 1; \

- fi; \

- done

- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \

- if test "$$subdir" = .; then :; else \

- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \

- $(am__relativize); \

- new_distdir=$$reldir; \

- dir1=$$subdir; dir2="$(top_distdir)"; \

- $(am__relativize); \

- new_top_distdir=$$reldir; \

- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \

- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \

- ($(am__cd) $$subdir && \

- $(MAKE) $(AM_MAKEFLAGS) \

- top_distdir="$$new_top_distdir" \

- distdir="$$new_distdir" \

- am__remove_distdir=: \

- am__skip_length_check=: \

- am__skip_mode_fix=: \

- distdir) \

- || exit 1; \

- fi; \

- done

- -test -n "$(am__skip_mode_fix)" \

- || find "$(distdir)" -type d ! -perm -755 \

- -exec chmod u+rwx,go+rx {} \; -o \

- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \

- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \

- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \

- || chmod -R a+r "$(distdir)"

-dist-gzip: distdir

- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz

- $(am__remove_distdir)

-dist-bzip2: distdir

- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2

- $(am__remove_distdir)

-

-dist-lzma: distdir

- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma

- $(am__remove_distdir)

-

-dist-xz: distdir

- tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz

- $(am__remove_distdir)

-

-dist-tarZ: distdir

- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z

- $(am__remove_distdir)

-

-dist-shar: distdir

- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz

- $(am__remove_distdir)

-

-dist-zip: distdir

- -rm -f $(distdir).zip

- zip -rq $(distdir).zip $(distdir)

- $(am__remove_distdir)

-

-dist dist-all: distdir

- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2

- $(am__remove_distdir)

-

-# This target untars the dist file and tries a VPATH configuration. Then

-# it guarantees that the distribution is self-contained by making another

-# tarfile.

-distcheck: dist

- case '$(DIST_ARCHIVES)' in \

- *.tar.gz*) \

- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\

- *.tar.bz2*) \

- bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\

- *.tar.lzma*) \

- lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\

- *.tar.xz*) \

- xz -dc $(distdir).tar.xz | $(am__untar) ;;\

- *.tar.Z*) \

- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\

- *.shar.gz*) \

- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\

- *.zip*) \

- unzip $(distdir).zip ;;\

- esac

- chmod -R a-w $(distdir); chmod a+w $(distdir)

- mkdir $(distdir)/_build

- mkdir $(distdir)/_inst

- chmod a-w $(distdir)

- test -d $(distdir)/_build || exit 0; \

- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \

- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \

- && am__cwd=`pwd` \

- && $(am__cd) $(distdir)/_build \

- && ../configure --srcdir=.. --prefix="$$dc_install_base" \

- $(DISTCHECK_CONFIGURE_FLAGS) \

- && $(MAKE) $(AM_MAKEFLAGS) \

- && $(MAKE) $(AM_MAKEFLAGS) dvi \

- && $(MAKE) $(AM_MAKEFLAGS) check \

- && $(MAKE) $(AM_MAKEFLAGS) install \

- && $(MAKE) $(AM_MAKEFLAGS) installcheck \

- && $(MAKE) $(AM_MAKEFLAGS) uninstall \

- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \

- distuninstallcheck \

- && chmod -R a-w "$$dc_install_base" \

- && ({ \

- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \

- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \

- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \

- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \

- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \

- } || { rm -rf "$$dc_destdir"; exit 1; }) \

- && rm -rf "$$dc_destdir" \

- && $(MAKE) $(AM_MAKEFLAGS) dist \

- && rm -rf $(DIST_ARCHIVES) \

- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \

- && cd "$$am__cwd" \

- || exit 1

- $(am__remove_distdir)

- @(echo "$(distdir) archives ready for distribution: "; \

- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \

- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'

-distuninstallcheck:

- @$(am__cd) '$(distuninstallcheck_dir)' \

- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \

- || { echo "ERROR: files left after uninstall:" ; \

- if test -n "$(DESTDIR)"; then \

- echo " (check DESTDIR support)"; \

- fi ; \

- $(distuninstallcheck_listfiles) ; \

- exit 1; } >&2

-distcleancheck: distclean

- @if test '$(srcdir)' = . ; then \

- echo "ERROR: distcleancheck can only run from a VPATH build" ; \

- exit 1 ; \

- fi

- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \

- || { echo "ERROR: files left in build directory after distclean:" ; \

- $(distcleancheck_listfiles) ; \

- exit 1; } >&2

-check-am: all-am

-check: check-recursive

-all-am: Makefile

-installdirs: installdirs-recursive

-installdirs-am:

-install: install-recursive

-install-exec: install-exec-recursive

-install-data: install-data-recursive

-uninstall: uninstall-recursive

-

-install-am: all-am

- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

-

-installcheck: installcheck-recursive

-install-strip:

- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

- `test -z '$(STRIP)' || \

- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install

-mostlyclean-generic:

-

-clean-generic:

-

-distclean-generic:

- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

-

-maintainer-clean-generic:

- @echo "This command is intended for maintainers to use"

- @echo "it deletes files that may require special tools to rebuild."

-clean: clean-recursive

-

-clean-am: clean-generic mostlyclean-am

-

-distclean: distclean-recursive

- -rm -f $(am__CONFIG_DISTCLEAN_FILES)

- -rm -f Makefile

-distclean-am: clean-am distclean-generic distclean-tags

-

-dvi: dvi-recursive

-

-dvi-am:

-

-html: html-recursive

-

-html-am:

-

-info: info-recursive

-

-info-am:

-

-install-data-am:

-

-install-dvi: install-dvi-recursive

-

-install-dvi-am:

-

-install-exec-am:

-

-install-html: install-html-recursive

-

-install-html-am:

-

-install-info: install-info-recursive

-

-install-info-am:

-

-install-man:

-

-install-pdf: install-pdf-recursive

-

-install-pdf-am:

-

-install-ps: install-ps-recursive

-

-install-ps-am:

-

-installcheck-am:

-

-maintainer-clean: maintainer-clean-recursive

- -rm -f $(am__CONFIG_DISTCLEAN_FILES)

- -rm -rf $(top_srcdir)/autom4te.cache

- -rm -f Makefile

-maintainer-clean-am: distclean-am maintainer-clean-generic

-

-mostlyclean: mostlyclean-recursive

-

-mostlyclean-am: mostlyclean-generic

-

-pdf: pdf-recursive

-

-pdf-am:

-

-ps: ps-recursive

-

-ps-am:

-

-uninstall-am:

-

-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \

- install-am install-strip tags-recursive

-

-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \

- all all-am am--refresh check check-am clean clean-generic \

- ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \

- dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \

- distclean distclean-generic distclean-tags distcleancheck \

- distdir distuninstallcheck dvi dvi-am html html-am info \

- info-am install install-am install-data install-data-am \

- install-dvi install-dvi-am install-exec install-exec-am \

- install-html install-html-am install-info install-info-am \

- install-man install-pdf install-pdf-am install-ps \

- install-ps-am install-strip installcheck installcheck-am \

- installdirs installdirs-am maintainer-clean \

- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \

- pdf-am ps ps-am tags tags-recursive uninstall uninstall-am

-

-

-# Build ChangeLog from GIT history

-ChangeLog:

- $(AM_V_GEN) if test -d $(top_srcdir)/.git; then \

- GIT_DIR="$(top_srcdir)/.git" git log --stat > $@; \

- fi

-

-dist: ChangeLog

-

-.PHONY: ChangeLog

-

-# Tell versions [3.59,3.63) of GNU make to not export all variables.

-# Otherwise a system limit (for SysV at least) may be exceeded.

-.NOEXPORT:

-# generated automatically by aclocal 1.11.1 -*- Autoconf -*-

-

-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,

-# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# This program is distributed in the hope that it will be useful,

-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

-# PARTICULAR PURPOSE.

-

-m4_ifndef([AC_AUTOCONF_VERSION],

- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl

-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,

-[m4_warning([this file was generated for autoconf 2.68.

-You have another version of autoconf. It may work, but is not guaranteed to.

-If you have problems, you may need to regenerate the build system entirely.

-To do so, use the procedure documented by the package, typically `autoreconf'.])])

-

-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# AM_AUTOMAKE_VERSION(VERSION)

-# ----------------------------

-# Automake X.Y traces this macro to ensure aclocal.m4 has been

-# generated from the m4 files accompanying Automake X.Y.

-# (This private macro should not be called outside this file.)

-AC_DEFUN([AM_AUTOMAKE_VERSION],

-[am__api_version='1.11'

-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to

-dnl require some minimum version. Point them to the right macro.

-m4_if([$1], [1.11.1], [],

- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl

-])

-

-# _AM_AUTOCONF_VERSION(VERSION)

-# -----------------------------

-# aclocal traces this macro to find the Autoconf version.

-# This is a private macro too. Using m4_define simplifies

-# the logic in aclocal, which can simply ignore this definition.

-m4_define([_AM_AUTOCONF_VERSION], [])

-

-# AM_SET_CURRENT_AUTOMAKE_VERSION

-# -------------------------------

-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.

-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.

-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],

-[AM_AUTOMAKE_VERSION([1.11.1])dnl

-m4_ifndef([AC_AUTOCONF_VERSION],

- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl

-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])

-

-# AM_AUX_DIR_EXPAND -*- Autoconf -*-

-

-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets

-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to

-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.

-#

-# Of course, Automake must honor this variable whenever it calls a

-# tool from the auxiliary directory. The problem is that $srcdir (and

-# therefore $ac_aux_dir as well) can be either absolute or relative,

-# depending on how configure is run. This is pretty annoying, since

-# it makes $ac_aux_dir quite unusable in subdirectories: in the top

-# source directory, any form will work fine, but in subdirectories a

-# relative path needs to be adjusted first.

-#

-# $ac_aux_dir/missing

-# fails when called from a subdirectory if $ac_aux_dir is relative

-# $top_srcdir/$ac_aux_dir/missing

-# fails if $ac_aux_dir is absolute,

-# fails when called from a subdirectory in a VPATH build with

-# a relative $ac_aux_dir

-#

-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir

-# are both prefixed by $srcdir. In an in-source build this is usually

-# harmless because $srcdir is `.', but things will broke when you

-# start a VPATH build or use an absolute $srcdir.

-#

-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,

-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:

-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`

-# and then we would define $MISSING as

-# MISSING="\${SHELL} $am_aux_dir/missing"

-# This will work as long as MISSING is not called from configure, because

-# unfortunately $(top_srcdir) has no meaning in configure.

-# However there are other variables, like CC, which are often used in

-# configure, and could therefore not use this "fixed" $ac_aux_dir.

-#

-# Another solution, used here, is to always expand $ac_aux_dir to an

-# absolute PATH. The drawback is that using absolute paths prevent a

-# configured tree to be moved without reconfiguration.

-

-AC_DEFUN([AM_AUX_DIR_EXPAND],

-[dnl Rely on autoconf to set up CDPATH properly.

-AC_PREREQ([2.50])dnl

-# expand $ac_aux_dir to an absolute path

-am_aux_dir=`cd $ac_aux_dir && pwd`

-])

-

-# AM_CONDITIONAL -*- Autoconf -*-

-

-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 9

-

-# AM_CONDITIONAL(NAME, SHELL-CONDITION)

-# -------------------------------------

-# Define a conditional.

-AC_DEFUN([AM_CONDITIONAL],

-[AC_PREREQ(2.52)dnl

- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],

- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl

-AC_SUBST([$1_TRUE])dnl

-AC_SUBST([$1_FALSE])dnl

-_AM_SUBST_NOTMAKE([$1_TRUE])dnl

-_AM_SUBST_NOTMAKE([$1_FALSE])dnl

-m4_define([_AM_COND_VALUE_$1], [$2])dnl

-if $2; then

- $1_TRUE=

- $1_FALSE='#'

-else

- $1_TRUE='#'

- $1_FALSE=

-fi

-AC_CONFIG_COMMANDS_PRE(

-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then

- AC_MSG_ERROR([[conditional "$1" was never defined.

-Usually this means the macro was only invoked conditionally.]])

-fi])])

-

-# Do all the work for Automake. -*- Autoconf -*-

-

-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,

-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 16

-

-# This macro actually does too much. Some checks are only needed if

-# your package does certain things. But this isn't really a big deal.

-

-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])

-# AM_INIT_AUTOMAKE([OPTIONS])

-# -----------------------------------------------

-# The call with PACKAGE and VERSION arguments is the old style

-# call (pre autoconf-2.50), which is being phased out. PACKAGE

-# and VERSION should now be passed to AC_INIT and removed from

-# the call to AM_INIT_AUTOMAKE.

-# We support both call styles for the transition. After

-# the next Automake release, Autoconf can make the AC_INIT

-# arguments mandatory, and then we can depend on a new Autoconf

-# release and drop the old call support.

-AC_DEFUN([AM_INIT_AUTOMAKE],

-[AC_PREREQ([2.62])dnl

-dnl Autoconf wants to disallow AM_ names. We explicitly allow

-dnl the ones we care about.

-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl

-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl

-AC_REQUIRE([AC_PROG_INSTALL])dnl

-if test "`cd $srcdir && pwd`" != "`pwd`"; then

- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output

- # is not polluted with repeated "-I."

- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl

- # test to see if srcdir already configured

- if test -f $srcdir/config.status; then

- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])

- fi

-fi

-

-# test whether we have cygpath

-if test -z "$CYGPATH_W"; then

- if (cygpath --version) >/dev/null 2>/dev/null; then

- CYGPATH_W='cygpath -w'

- else

- CYGPATH_W=echo

- fi

-fi

-AC_SUBST([CYGPATH_W])

-

-# Define the identity of the package.

-dnl Distinguish between old-style and new-style calls.

-m4_ifval([$2],

-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl

- AC_SUBST([PACKAGE], [$1])dnl

- AC_SUBST([VERSION], [$2])],

-[_AM_SET_OPTIONS([$1])dnl

-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.

-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,

- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl

- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl

- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl

-

-_AM_IF_OPTION([no-define],,

-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])

- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl

-

-# Some tools Automake needs.

-AC_REQUIRE([AM_SANITY_CHECK])dnl

-AC_REQUIRE([AC_ARG_PROGRAM])dnl

-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})

-AM_MISSING_PROG(AUTOCONF, autoconf)

-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})

-AM_MISSING_PROG(AUTOHEADER, autoheader)

-AM_MISSING_PROG(MAKEINFO, makeinfo)

-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl

-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl

-AC_REQUIRE([AM_PROG_MKDIR_P])dnl

-# We need awk for the "check" target. The system "awk" is bad on

-# some platforms.

-AC_REQUIRE([AC_PROG_AWK])dnl

-AC_REQUIRE([AC_PROG_MAKE_SET])dnl

-AC_REQUIRE([AM_SET_LEADING_DOT])dnl

-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],

- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],

- [_AM_PROG_TAR([v7])])])

-_AM_IF_OPTION([no-dependencies],,

-[AC_PROVIDE_IFELSE([AC_PROG_CC],

- [_AM_DEPENDENCIES(CC)],

- [define([AC_PROG_CC],

- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl

-AC_PROVIDE_IFELSE([AC_PROG_CXX],

- [_AM_DEPENDENCIES(CXX)],

- [define([AC_PROG_CXX],

- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl

-AC_PROVIDE_IFELSE([AC_PROG_OBJC],

- [_AM_DEPENDENCIES(OBJC)],

- [define([AC_PROG_OBJC],

- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl

-])

-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl

-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the

-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro

-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.

-AC_CONFIG_COMMANDS_PRE(dnl

-[m4_provide_if([_AM_COMPILER_EXEEXT],

- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl

-])

-

-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not

-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further

-dnl mangled by Autoconf and run in a shell conditional statement.

-m4_define([_AC_COMPILER_EXEEXT],

-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])

-

-

-# When config.status generates a header, we must update the stamp-h file.

-# This file resides in the same directory as the config header

-# that is generated. The stamp files are numbered to have different names.

-

-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the

-# loop where config.status creates the headers, so we can generate

-# our stamp files there.

-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],

-[# Compute $1's index in $config_headers.

-_am_arg=$1

-_am_stamp_count=1

-for _am_header in $config_headers :; do

- case $_am_header in

- $_am_arg | $_am_arg:* )

- break ;;

- * )

- _am_stamp_count=`expr $_am_stamp_count + 1` ;;

- esac

-done

-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])

-

-# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# AM_PROG_INSTALL_SH

-# ------------------

-# Define $install_sh.

-AC_DEFUN([AM_PROG_INSTALL_SH],

-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl

-if test x"${install_sh}" != xset; then

- case $am_aux_dir in

- *\ * | *\ *)

- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;

- *)

- install_sh="\${SHELL} $am_aux_dir/install-sh"

- esac

-fi

-AC_SUBST(install_sh)])

-

-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 2

-

-# Check whether the underlying file-system supports filenames

-# with a leading dot. For instance MS-DOS doesn't.

-AC_DEFUN([AM_SET_LEADING_DOT],

-[rm -rf .tst 2>/dev/null

-mkdir .tst 2>/dev/null

-if test -d .tst; then

- am__leading_dot=.

-else

- am__leading_dot=_

-fi

-rmdir .tst 2>/dev/null

-AC_SUBST([am__leading_dot])])

-

-# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-

-# From Jim Meyering

-

-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 5

-

-# AM_MAINTAINER_MODE([DEFAULT-MODE])

-# ----------------------------------

-# Control maintainer-specific portions of Makefiles.

-# Default is to disable them, unless `enable' is passed literally.

-# For symmetry, `disable' may be passed as well. Anyway, the user

-# can override the default with the --enable/--disable switch.

-AC_DEFUN([AM_MAINTAINER_MODE],

-[m4_case(m4_default([$1], [disable]),

- [enable], [m4_define([am_maintainer_other], [disable])],

- [disable], [m4_define([am_maintainer_other], [enable])],

- [m4_define([am_maintainer_other], [enable])

- m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])

-AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])

- dnl maintainer-mode's default is 'disable' unless 'enable' is passed

- AC_ARG_ENABLE([maintainer-mode],

-[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful

- (and sometimes confusing) to the casual installer],

- [USE_MAINTAINER_MODE=$enableval],

- [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))

- AC_MSG_RESULT([$USE_MAINTAINER_MODE])

- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])

- MAINT=$MAINTAINER_MODE_TRUE

- AC_SUBST([MAINT])dnl

-]

-)

-

-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])

-

-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-

-

-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 6

-

-# AM_MISSING_PROG(NAME, PROGRAM)

-# ------------------------------

-AC_DEFUN([AM_MISSING_PROG],

-[AC_REQUIRE([AM_MISSING_HAS_RUN])

-$1=${$1-"${am_missing_run}$2"}

-AC_SUBST($1)])

-

-

-# AM_MISSING_HAS_RUN

-# ------------------

-# Define MISSING if not defined so far and test if it supports --run.

-# If it does, set am_missing_run to use it, otherwise, to nothing.

-AC_DEFUN([AM_MISSING_HAS_RUN],

-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl

-AC_REQUIRE_AUX_FILE([missing])dnl

-if test x"${MISSING+set}" != xset; then

- case $am_aux_dir in

- *\ * | *\ *)

- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;

- *)

- MISSING="\${SHELL} $am_aux_dir/missing" ;;

- esac

-fi

-# Use eval to expand $SHELL

-if eval "$MISSING --run true"; then

- am_missing_run="$MISSING --run "

-else

- am_missing_run=

- AC_MSG_WARN([`missing' script is too old or missing])

-fi

-])

-

-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# AM_PROG_MKDIR_P

-# ---------------

-# Check for `mkdir -p'.

-AC_DEFUN([AM_PROG_MKDIR_P],

-[AC_PREREQ([2.60])dnl

-AC_REQUIRE([AC_PROG_MKDIR_P])dnl

-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,

-dnl while keeping a definition of mkdir_p for backward compatibility.

-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.

-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of

-dnl Makefile.ins that do not define MKDIR_P, so we do our own

-dnl adjustment using top_builddir (which is defined more often than

-dnl MKDIR_P).

-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl

-case $mkdir_p in

- [[\\/$]]* | ?:[[\\/]]*) ;;

- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;

-esac

-])

-

-# Helper functions for option handling. -*- Autoconf -*-

-

-# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 4

-

-# _AM_MANGLE_OPTION(NAME)

-# -----------------------

-AC_DEFUN([_AM_MANGLE_OPTION],

-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])

-

-# _AM_SET_OPTION(NAME)

-# ------------------------------

-# Set option NAME. Presently that only means defining a flag for this option.

-AC_DEFUN([_AM_SET_OPTION],

-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])

-

-# _AM_SET_OPTIONS(OPTIONS)

-# ----------------------------------

-# OPTIONS is a space-separated list of Automake options.

-AC_DEFUN([_AM_SET_OPTIONS],

-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])

-

-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])

-# -------------------------------------------

-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.

-AC_DEFUN([_AM_IF_OPTION],

-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])

-

-# Check to make sure that the build environment is sane. -*- Autoconf -*-

-

-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 5

-

-# AM_SANITY_CHECK

-# ---------------

-AC_DEFUN([AM_SANITY_CHECK],

-[AC_MSG_CHECKING([whether build environment is sane])

-# Just in case

-sleep 1

-echo timestamp > conftest.file

-# Reject unsafe characters in $srcdir or the absolute working directory

-# name. Accept space and tab only in the latter.

-am_lf='

-'

-case `pwd` in

- *[[\\\"\#\$\&\'\`$am_lf]]*)

- AC_MSG_ERROR([unsafe absolute working directory name]);;

-esac

-case $srcdir in

- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)

- AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;

-esac

-

-# Do `set' in a subshell so we don't clobber the current shell's

-# arguments. Must try -L first in case configure is actually a

-# symlink; some systems play weird games with the mod time of symlinks

-# (eg FreeBSD returns the mod time of the symlink's containing

-# directory).

-if (

- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`

- if test "$[*]" = "X"; then

- # -L didn't work.

- set X `ls -t "$srcdir/configure" conftest.file`

- fi

- rm -f conftest.file

- if test "$[*]" != "X $srcdir/configure conftest.file" \

- && test "$[*]" != "X conftest.file $srcdir/configure"; then

-

- # If neither matched, then we have a broken ls. This can happen

- # if, for instance, CONFIG_SHELL is bash and it inherits a

- # broken ls alias from the environment. This has actually

- # happened. Such a system could not be considered "sane".

- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken

-alias in your environment])

- fi

-

- test "$[2]" = conftest.file

- )

-then

- # Ok.

- :

-else

- AC_MSG_ERROR([newly created file is older than distributed files!

-Check your system clock])

-fi

-AC_MSG_RESULT(yes)])

-

-# Copyright (C) 2009 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 1

-

-# AM_SILENT_RULES([DEFAULT])

-# --------------------------

-# Enable less verbose build rules; with the default set to DEFAULT

-# (`yes' being less verbose, `no' or empty being verbose).

-AC_DEFUN([AM_SILENT_RULES],

-[AC_ARG_ENABLE([silent-rules],

-[ --enable-silent-rules less verbose build output (undo: `make V=1')

- --disable-silent-rules verbose build output (undo: `make V=0')])

-case $enable_silent_rules in

-yes) AM_DEFAULT_VERBOSITY=0;;

-no) AM_DEFAULT_VERBOSITY=1;;

-*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;

-esac

-AC_SUBST([AM_DEFAULT_VERBOSITY])dnl

-AM_BACKSLASH='\'

-AC_SUBST([AM_BACKSLASH])dnl

-_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl

-])

-

-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# AM_PROG_INSTALL_STRIP

-# ---------------------

-# One issue with vendor `install' (even GNU) is that you can't

-# specify the program used to strip binaries. This is especially

-# annoying in cross-compiling environments, where the build's strip

-# is unlikely to handle the host's binaries.

-# Fortunately install-sh will honor a STRIPPROG variable, so we

-# always use install-sh in `make install-strip', and initialize

-# STRIPPROG with the value of the STRIP variable (set by the user).

-AC_DEFUN([AM_PROG_INSTALL_STRIP],

-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl

-# Installed binaries are usually stripped using `strip' when the user

-# run `make install-strip'. However `strip' might not be the right

-# tool to use in cross-compilation environments, therefore Automake

-# will honor the `STRIP' environment variable to overrule this program.

-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.

-if test "$cross_compiling" != no; then

- AC_CHECK_TOOL([STRIP], [strip], :)

-fi

-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"

-AC_SUBST([INSTALL_STRIP_PROGRAM])])

-

-# Copyright (C) 2006, 2008 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 2

-

-# _AM_SUBST_NOTMAKE(VARIABLE)

-# ---------------------------

-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.

-# This macro is traced by Automake.

-AC_DEFUN([_AM_SUBST_NOTMAKE])

-

-# AM_SUBST_NOTMAKE(VARIABLE)

-# ---------------------------

-# Public sister of _AM_SUBST_NOTMAKE.

-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])

-

-# Check how to create a tarball. -*- Autoconf -*-

-

-# Copyright (C) 2004, 2005 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 2

-

-# _AM_PROG_TAR(FORMAT)

-# --------------------

-# Check how to create a tarball in format FORMAT.

-# FORMAT should be one of `v7', `ustar', or `pax'.

-#

-# Substitute a variable $(am__tar) that is a command

-# writing to stdout a FORMAT-tarball containing the directory

-# $tardir.

-# tardir=directory && $(am__tar) > result.tar

-#

-# Substitute a variable $(am__untar) that extract such

-# a tarball read from stdin.

-# $(am__untar) < result.tar

-AC_DEFUN([_AM_PROG_TAR],

-[# Always define AMTAR for backward compatibility.

-AM_MISSING_PROG([AMTAR], [tar])

-m4_if([$1], [v7],

- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],

- [m4_case([$1], [ustar],, [pax],,

- [m4_fatal([Unknown tar format])])

-AC_MSG_CHECKING([how to create a $1 tar archive])

-# Loop over all known methods to create a tar archive until one works.

-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'

-_am_tools=${am_cv_prog_tar_$1-$_am_tools}

-# Do not fold the above two line into one, because Tru64 sh and

-# Solaris sh will not grok spaces in the rhs of `-'.

-for _am_tool in $_am_tools

-do

- case $_am_tool in

- gnutar)

- for _am_tar in tar gnutar gtar;

- do

- AM_RUN_LOG([$_am_tar --version]) && break

- done

- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'

- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'

- am__untar="$_am_tar -xf -"

- ;;

- plaintar)

- # Must skip GNU tar: if it does not support --format= it doesn't create

- # ustar tarball either.

- (tar --version) >/dev/null 2>&1 && continue

- am__tar='tar chf - "$$tardir"'

- am__tar_='tar chf - "$tardir"'

- am__untar='tar xf -'

- ;;

- pax)

- am__tar='pax -L -x $1 -w "$$tardir"'

- am__tar_='pax -L -x $1 -w "$tardir"'

- am__untar='pax -r'

- ;;

- cpio)

- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'

- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'

- am__untar='cpio -i -H $1 -d'

- ;;

- none)

- am__tar=false

- am__tar_=false

- am__untar=false

- ;;

- esac

-

- # If the value was cached, stop now. We just wanted to have am__tar

- # and am__untar set.

- test -n "${am_cv_prog_tar_$1}" && break

-

- # tar/untar a dummy directory, and stop if the command works

- rm -rf conftest.dir

- mkdir conftest.dir

- echo GrepMe > conftest.dir/file

- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])

- rm -rf conftest.dir

- if test -s conftest.tar; then

- AM_RUN_LOG([$am__untar <conftest.tar])

- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break

- fi

-done

-rm -rf conftest.dir

-

-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])

-AC_MSG_RESULT([$am_cv_prog_tar_$1])])

-AC_SUBST([am__tar])

-AC_SUBST([am__untar])

-]) # _AM_PROG_TAR

-

-#! /bin/sh

-# Guess values for system-dependent variables and create Makefiles.

-# Generated by GNU Autoconf 2.68 for mate-common 2011.10.29.

-#

-# Report bugs to <https://github.com/perberos/mate-desktop-environment>.

-#

-#

-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,

-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software

-# Foundation, Inc.

-#

-#

-# This configure script is free software; the Free Software Foundation

-# gives unlimited permission to copy, distribute and modify it.

-## -------------------- ##

-## M4sh Initialization. ##

-## -------------------- ##

-

-# Be more Bourne compatible

-DUALCASE=1; export DUALCASE # for MKS sh

-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :

- emulate sh

- NULLCMD=:

- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which

- # is contrary to our usage. Disable this feature.

- alias -g '${1+"$@"}'='"$@"'

- setopt NO_GLOB_SUBST

-else

- case `(set -o) 2>/dev/null` in #(

- *posix*) :

- set -o posix ;; #(

- *) :

- ;;

-esac

-fi

-

-

-as_nl='

-'

-export as_nl

-# Printing a long string crashes Solaris 7 /usr/bin/printf.

-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'

-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo

-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo

-# Prefer a ksh shell builtin over an external printf program on Solaris,

-# but without wasting forks for bash or zsh.

-if test -z "$BASH_VERSION$ZSH_VERSION" \

- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then

- as_echo='print -r --'

- as_echo_n='print -rn --'

-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then

- as_echo='printf %s\n'

- as_echo_n='printf %s'

-else

- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then

- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'

- as_echo_n='/usr/ucb/echo -n'

- else

- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'

- as_echo_n_body='eval

- arg=$1;

- case $arg in #(

- *"$as_nl"*)

- expr "X$arg" : "X\\(.*\\)$as_nl";

- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;

- esac;

- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"

- '

- export as_echo_n_body

- as_echo_n='sh -c $as_echo_n_body as_echo'

- fi

- export as_echo_body

- as_echo='sh -c $as_echo_body as_echo'

-fi

-

-# The user is always right.

-if test "${PATH_SEPARATOR+set}" != set; then

- PATH_SEPARATOR=:

- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {

- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||

- PATH_SEPARATOR=';'

- }

-fi

-

-

-# IFS

-# We need space, tab and new line, in precisely that order. Quoting is

-# there to prevent editors from complaining about space-tab.

-# (If _AS_PATH_WALK were called with IFS unset, it would disable word

-# splitting by setting IFS to empty value.)

-IFS=" "" $as_nl"

-

-# Find who we are. Look in the path if we contain no directory separator.

-as_myself=

-case $0 in #((

- *[\\/]* ) as_myself=$0 ;;

- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR

-for as_dir in $PATH

-do

- IFS=$as_save_IFS

- test -z "$as_dir" && as_dir=.

- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break

- done

-IFS=$as_save_IFS

-

- ;;

-esac

-# We did not find ourselves, most probably we were run as `sh COMMAND'

-# in which case we are not to be found in the path.

-if test "x$as_myself" = x; then

- as_myself=$0

-fi

-if test ! -f "$as_myself"; then

- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2

- exit 1

-fi

-

-# Unset variables that we do not need and which cause bugs (e.g. in

-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"

-# suppresses any "Segmentation fault" message there. '((' could

-# trigger a bug in pdksh 5.2.14.

-for as_var in BASH_ENV ENV MAIL MAILPATH

-do eval test x\${$as_var+set} = xset \

- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :

-done

-PS1='$ '

-PS2='> '

-PS4='+ '

-

-# NLS nuisances.

-LC_ALL=C

-export LC_ALL

-LANGUAGE=C

-export LANGUAGE

-

-# CDPATH.

-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

-

-if test "x$CONFIG_SHELL" = x; then

- as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :

- emulate sh

- NULLCMD=:

- # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which

- # is contrary to our usage. Disable this feature.

- alias -g '\${1+\"\$@\"}'='\"\$@\"'

- setopt NO_GLOB_SUBST

-else

- case \`(set -o) 2>/dev/null\` in #(

- *posix*) :

- set -o posix ;; #(

- *) :

- ;;

-esac

-fi

-"

- as_required="as_fn_return () { (exit \$1); }

-as_fn_success () { as_fn_return 0; }

-as_fn_failure () { as_fn_return 1; }

-as_fn_ret_success () { return 0; }

-as_fn_ret_failure () { return 1; }

-

-exitcode=0

-as_fn_success || { exitcode=1; echo as_fn_success failed.; }

-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }

-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }

-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }

-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :

-

-else

- exitcode=1; echo positional parameters were not saved.

-fi

-test x\$exitcode = x0 || exit 1"

- as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO

- as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO

- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&

- test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"

- if (eval "$as_required") 2>/dev/null; then :

- as_have_required=yes

-else

- as_have_required=no

-fi

- if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :

-

-else

- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR

-as_found=false

-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH

-do

- IFS=$as_save_IFS

- test -z "$as_dir" && as_dir=.

- as_found=:

- case $as_dir in #(

- /*)

- for as_base in sh bash ksh sh5; do

- # Try only shells that exist, to save several forks.

- as_shell=$as_dir/$as_base

- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&

- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :

- CONFIG_SHELL=$as_shell as_have_required=yes

- if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :

- break 2

-fi

-fi

- done;;

- esac

- as_found=false

-done

-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&

- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :

- CONFIG_SHELL=$SHELL as_have_required=yes

-fi; }

-IFS=$as_save_IFS

-

-

- if test "x$CONFIG_SHELL" != x; then :

- # We cannot yet assume a decent shell, so we have to provide a

- # neutralization value for shells without unset; and this also

- # works around shells that cannot unset nonexistent variables.

- # Preserve -v and -x to the replacement shell.

- BASH_ENV=/dev/null

- ENV=/dev/null

- (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV

- export CONFIG_SHELL

- case $- in # ((((

- *v*x* | *x*v* ) as_opts=-vx ;;

- *v* ) as_opts=-v ;;

- *x* ) as_opts=-x ;;

- * ) as_opts= ;;

- esac

- exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}

-fi

-

- if test x$as_have_required = xno; then :

- $as_echo "$0: This script requires a shell more modern than all"

- $as_echo "$0: the shells that I found on your system."

- if test x${ZSH_VERSION+set} = xset ; then

- $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"

- $as_echo "$0: be upgraded to zsh 4.3.4 or later."

- else

- $as_echo "$0: Please tell [email protected] and

-$0: https://github.com/perberos/mate-desktop-environment

-$0: about your system, including any error possibly output

-$0: before this message. Then install a modern shell, or

-$0: manually run the script under such a shell if you do

-$0: have one."

- fi

- exit 1

-fi

-fi

-fi

-SHELL=${CONFIG_SHELL-/bin/sh}

-export SHELL

-# Unset more variables known to interfere with behavior of common tools.

-CLICOLOR_FORCE= GREP_OPTIONS=

-unset CLICOLOR_FORCE GREP_OPTIONS

-

-## --------------------- ##

-## M4sh Shell Functions. ##

-## --------------------- ##

-# as_fn_unset VAR

-# ---------------

-# Portably unset VAR.

-as_fn_unset ()

-{

- { eval $1=; unset $1;}

-}

-as_unset=as_fn_unset

-

-# as_fn_set_status STATUS

-# -----------------------

-# Set $? to STATUS, without forking.

-as_fn_set_status ()

-{

- return $1

-} # as_fn_set_status

-

-# as_fn_exit STATUS

-# -----------------

-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.

-as_fn_exit ()

-{

- set +e

- as_fn_set_status $1

- exit $1

-} # as_fn_exit

-

-# as_fn_mkdir_p

-# -------------

-# Create "$as_dir" as a directory, including parents if necessary.

-as_fn_mkdir_p ()

-{

-

- case $as_dir in #(

- -*) as_dir=./$as_dir;;

- esac

- test -d "$as_dir" || eval $as_mkdir_p || {

- as_dirs=

- while :; do

- case $as_dir in #(

- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(

- *) as_qdir=$as_dir;;

- esac

- as_dirs="'$as_qdir' $as_dirs"

- as_dir=`$as_dirname -- "$as_dir" ||

-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \

- X"$as_dir" : 'X\(//\)[^/]' \| \

- X"$as_dir" : 'X\(//\)$' \| \

- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||

-$as_echo X"$as_dir" |

- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{

- s//\1/

- q

- }

- /^X\(\/\/\)[^/].*/{

- s//\1/

- q

- }

- /^X\(\/\/\)$/{

- s//\1/

- q

- }

- /^X\(\/\).*/{

- s//\1/

- q

- }

- s/.*/./; q'`

- test -d "$as_dir" && break

- done

- test -z "$as_dirs" || eval "mkdir $as_dirs"

- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"

-

-

-} # as_fn_mkdir_p

-# as_fn_append VAR VALUE

-# ----------------------

-# Append the text in VALUE to the end of the definition contained in VAR. Take

-# advantage of any shell optimizations that allow amortized linear growth over

-# repeated appends, instead of the typical quadratic growth present in naive

-# implementations.

-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :

- eval 'as_fn_append ()

- {

- eval $1+=\$2

- }'

-else

- as_fn_append ()

- {

- eval $1=\$$1\$2

- }

-fi # as_fn_append

-

-# as_fn_arith ARG...

-# ------------------

-# Perform arithmetic evaluation on the ARGs, and store the result in the

-# global $as_val. Take advantage of shells that can avoid forks. The arguments

-# must be portable across $(()) and expr.

-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :

- eval 'as_fn_arith ()

- {

- as_val=$(( $* ))

- }'

-else

- as_fn_arith ()

- {

- as_val=`expr "$@" || test $? -eq 1`

- }

-fi # as_fn_arith

-

-

-# as_fn_error STATUS ERROR [LINENO LOG_FD]

-# ----------------------------------------

-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are

-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the

-# script with STATUS, using 1 if that was 0.

-as_fn_error ()

-{

- as_status=$1; test $as_status -eq 0 && as_status=1

- if test "$4"; then

- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack

- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4

- fi

- $as_echo "$as_me: error: $2" >&2

- as_fn_exit $as_status

-} # as_fn_error

-

-if expr a : '\(a\)' >/dev/null 2>&1 &&

- test "X`expr 00001 : '.*\(...\)'`" = X001; then

- as_expr=expr

-else

- as_expr=false

-fi

-

-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then

- as_basename=basename

-else

- as_basename=false

-fi

-

-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then

- as_dirname=dirname

-else

- as_dirname=false

-fi

-

-as_me=`$as_basename -- "$0" ||

-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \

- X"$0" : 'X\(//\)$' \| \

- X"$0" : 'X\(/\)' \| . 2>/dev/null ||

-$as_echo X/"$0" |

- sed '/^.*\/\([^/][^/]*\)\/*$/{

- s//\1/

- q

- }

- /^X\/\(\/\/\)$/{

- s//\1/

- q

- }

- /^X\/\(\/\).*/{

- s//\1/

- q

- }

- s/.*/./; q'`

-

-# Avoid depending upon Character Ranges.

-as_cr_letters='abcdefghijklmnopqrstuvwxyz'

-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'

-as_cr_Letters=$as_cr_letters$as_cr_LETTERS

-as_cr_digits='0123456789'

-as_cr_alnum=$as_cr_Letters$as_cr_digits

-

-

- as_lineno_1=$LINENO as_lineno_1a=$LINENO

- as_lineno_2=$LINENO as_lineno_2a=$LINENO

- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&

- test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {

- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)

- sed -n '

- p

- /[$]LINENO/=

- ' <$as_myself |

- sed '

- s/[$]LINENO.*/&-/

- t lineno

- b

- :lineno

- N

- :loop

- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/

- t loop

- s/-\n.*//

- ' >$as_me.lineno &&

- chmod +x "$as_me.lineno" ||

- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }

-

- # Don't try to exec as it changes $[0], causing all sort of problems

- # (the dirname of $[0] is not the place where we might find the

- # original and so on. Autoconf is especially sensitive to this).

- . "./$as_me.lineno"

- # Exit status is that of the last command.

- exit

-}

-

-ECHO_C= ECHO_N= ECHO_T=

-case `echo -n x` in #(((((

--n*)

- case `echo 'xy\c'` in

- *c*) ECHO_T=' ';; # ECHO_T is single tab character.

- xy) ECHO_C='\c';;

- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null

- ECHO_T=' ';;

- esac;;

-*)

- ECHO_N='-n';;

-esac

-

-rm -f conf$$ conf$$.exe conf$$.file

-if test -d conf$$.dir; then

- rm -f conf$$.dir/conf$$.file

-else

- rm -f conf$$.dir

- mkdir conf$$.dir 2>/dev/null

-fi

-if (echo >conf$$.file) 2>/dev/null; then

- if ln -s conf$$.file conf$$ 2>/dev/null; then

- as_ln_s='ln -s'

- # ... but there are two gotchas:

- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.

- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.

- # In both cases, we have to default to `cp -p'.

- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||

- as_ln_s='cp -p'

- elif ln conf$$.file conf$$ 2>/dev/null; then

- as_ln_s=ln

- else

- as_ln_s='cp -p'

- fi

-else

- as_ln_s='cp -p'

-fi

-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file

-rmdir conf$$.dir 2>/dev/null

-

-if mkdir -p . 2>/dev/null; then

- as_mkdir_p='mkdir -p "$as_dir"'

-else

- test -d ./-p && rmdir ./-p

- as_mkdir_p=false

-fi

-

-if test -x / >/dev/null 2>&1; then

- as_test_x='test -x'

-else

- if ls -dL / >/dev/null 2>&1; then

- as_ls_L_option=L

- else

- as_ls_L_option=

- fi

- as_test_x='

- eval sh -c '\''

- if test -d "$1"; then

- test -d "$1/.";

- else

- case $1 in #(

- -*)set "./$1";;

- esac;

- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((

- ???[sx]*):;;*)false;;esac;fi

- '\'' sh

- '

-fi

-as_executable_p=$as_test_x

-

-# Sed expression to map a string onto a valid CPP name.

-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

-

-# Sed expression to map a string onto a valid variable name.

-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"

-

-

-test -n "$DJDIR" || exec 7<&0 </dev/null

-exec 6>&1

-

-# Name of the host.

-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,

-# so uname gets run too.

-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`

-

-#

-# Initializations.

-#

-ac_default_prefix=/usr/local

-ac_clean_files=

-ac_config_libobj_dir=.

-LIBOBJS=

-cross_compiling=no

-subdirs=

-MFLAGS=

-MAKEFLAGS=

-

-# Identity of this package.

-PACKAGE_NAME='mate-common'

-PACKAGE_TARNAME='mate-common'

-PACKAGE_VERSION='2011.10.29'

-PACKAGE_STRING='mate-common 2011.10.29'

-PACKAGE_BUGREPORT='https://github.com/perberos/mate-desktop-environment'

-PACKAGE_URL=''

-

-ac_unique_file="macros2/mate-autogen.sh"

-ac_subst_vars='LTLIBOBJS

-LIBOBJS

-MAINT

-MAINTAINER_MODE_FALSE

-MAINTAINER_MODE_TRUE

-AM_BACKSLASH

-AM_DEFAULT_VERBOSITY

-am__untar

-am__tar

-AMTAR

-am__leading_dot

-SET_MAKE

-AWK

-mkdir_p

-MKDIR_P

-INSTALL_STRIP_PROGRAM

-STRIP

-install_sh

-MAKEINFO

-AUTOHEADER

-AUTOMAKE

-AUTOCONF

-ACLOCAL

-VERSION

-PACKAGE

-CYGPATH_W

-am__isrc

-INSTALL_DATA

-INSTALL_SCRIPT

-INSTALL_PROGRAM

-target_alias

-host_alias

-build_alias

-LIBS

-ECHO_T

-ECHO_N

-ECHO_C

-DEFS

-mandir

-localedir

-libdir

-psdir

-pdfdir

-dvidir

-htmldir

-infodir

-docdir

-oldincludedir

-includedir

-localstatedir

-sharedstatedir

-sysconfdir

-datadir

-datarootdir

-libexecdir

-sbindir

-bindir

-program_transform_name

-prefix

-exec_prefix

-PACKAGE_URL

-PACKAGE_BUGREPORT

-PACKAGE_STRING

-PACKAGE_VERSION

-PACKAGE_TARNAME

-PACKAGE_NAME

-PATH_SEPARATOR

-SHELL'

-ac_subst_files=''

-ac_user_opts='

-enable_option_checking

-enable_silent_rules

-enable_maintainer_mode

-'

- ac_precious_vars='build_alias

-host_alias

-target_alias'

-

-

-# Initialize some variables set by options.

-ac_init_help=

-ac_init_version=false

-ac_unrecognized_opts=

-ac_unrecognized_sep=

-# The variables have the same names as the options, with

-# dashes changed to underlines.

-cache_file=/dev/null

-exec_prefix=NONE

-no_create=

-no_recursion=

-prefix=NONE

-program_prefix=NONE

-program_suffix=NONE

-program_transform_name=s,x,x,

-silent=

-site=

-srcdir=

-verbose=

-x_includes=NONE

-x_libraries=NONE

-

-# Installation directory options.

-# These are left unexpanded so users can "make install exec_prefix=/foo"

-# and all the variables that are supposed to be based on exec_prefix

-# by default will actually change.

-# Use braces instead of parens because sh, perl, etc. also accept them.

-# (The list follows the same order as the GNU Coding Standards.)

-bindir='${exec_prefix}/bin'

-sbindir='${exec_prefix}/sbin'

-libexecdir='${exec_prefix}/libexec'

-datarootdir='${prefix}/share'

-datadir='${datarootdir}'

-sysconfdir='${prefix}/etc'

-sharedstatedir='${prefix}/com'

-localstatedir='${prefix}/var'

-includedir='${prefix}/include'

-oldincludedir='/usr/include'

-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'

-infodir='${datarootdir}/info'

-htmldir='${docdir}'

-dvidir='${docdir}'

-pdfdir='${docdir}'

-psdir='${docdir}'

-libdir='${exec_prefix}/lib'

-localedir='${datarootdir}/locale'

-mandir='${datarootdir}/man'

-

-ac_prev=

-ac_dashdash=

-for ac_option

-do

- # If the previous option needs an argument, assign it.

- if test -n "$ac_prev"; then

- eval $ac_prev=\$ac_option

- ac_prev=

- continue

- fi

-

- case $ac_option in

- *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;

- *=) ac_optarg= ;;

- *) ac_optarg=yes ;;

- esac

-

- # Accept the important Cygnus configure options, so we can diagnose typos.

-

- case $ac_dashdash$ac_option in

- --)

- ac_dashdash=yes ;;

-

- -bindir | --bindir | --bindi | --bind | --bin | --bi)

- ac_prev=bindir ;;

- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)

- bindir=$ac_optarg ;;

-

- -build | --build | --buil | --bui | --bu)

- ac_prev=build_alias ;;

- -build=* | --build=* | --buil=* | --bui=* | --bu=*)

- build_alias=$ac_optarg ;;

-

- -cache-file | --cache-file | --cache-fil | --cache-fi \

- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)

- ac_prev=cache_file ;;

- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \

- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)

- cache_file=$ac_optarg ;;

-

- --config-cache | -C)

- cache_file=config.cache ;;

-

- -datadir | --datadir | --datadi | --datad)

- ac_prev=datadir ;;

- -datadir=* | --datadir=* | --datadi=* | --datad=*)

- datadir=$ac_optarg ;;

-

- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \

- | --dataroo | --dataro | --datar)

- ac_prev=datarootdir ;;

- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \

- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)

- datarootdir=$ac_optarg ;;

-

- -disable-* | --disable-*)

- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`

- # Reject names that are not valid shell variable names.

- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&

- as_fn_error $? "invalid feature name: $ac_useropt"

- ac_useropt_orig=$ac_useropt

- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`

- case $ac_user_opts in

- *"

-"enable_$ac_useropt"

-"*) ;;

- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"

- ac_unrecognized_sep=', ';;

- esac

- eval enable_$ac_useropt=no ;;

-

- -docdir | --docdir | --docdi | --doc | --do)

- ac_prev=docdir ;;

- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)

- docdir=$ac_optarg ;;

-

- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)

- ac_prev=dvidir ;;

- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)

- dvidir=$ac_optarg ;;

-

- -enable-* | --enable-*)

- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`

- # Reject names that are not valid shell variable names.

- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&

- as_fn_error $? "invalid feature name: $ac_useropt"

- ac_useropt_orig=$ac_useropt

- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`

- case $ac_user_opts in

- *"

-"enable_$ac_useropt"

-"*) ;;

- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"

- ac_unrecognized_sep=', ';;

- esac

- eval enable_$ac_useropt=\$ac_optarg ;;

-

- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \

- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \

- | --exec | --exe | --ex)

- ac_prev=exec_prefix ;;

- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \

- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \

- | --exec=* | --exe=* | --ex=*)

- exec_prefix=$ac_optarg ;;

-

- -gas | --gas | --ga | --g)

- # Obsolete; use --with-gas.

- with_gas=yes ;;

-

- -help | --help | --hel | --he | -h)

- ac_init_help=long ;;

- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)

- ac_init_help=recursive ;;

- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)

- ac_init_help=short ;;

-

- -host | --host | --hos | --ho)

- ac_prev=host_alias ;;

- -host=* | --host=* | --hos=* | --ho=*)

- host_alias=$ac_optarg ;;

-

- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)

- ac_prev=htmldir ;;

- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \

- | --ht=*)

- htmldir=$ac_optarg ;;

-

- -includedir | --includedir | --includedi | --included | --include \

- | --includ | --inclu | --incl | --inc)

- ac_prev=includedir ;;

- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \

- | --includ=* | --inclu=* | --incl=* | --inc=*)

- includedir=$ac_optarg ;;

-

- -infodir | --infodir | --infodi | --infod | --info | --inf)

- ac_prev=infodir ;;

- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)

- infodir=$ac_optarg ;;

-

- -libdir | --libdir | --libdi | --libd)

- ac_prev=libdir ;;

- -libdir=* | --libdir=* | --libdi=* | --libd=*)

- libdir=$ac_optarg ;;

-

- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \

- | --libexe | --libex | --libe)

- ac_prev=libexecdir ;;

- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \

- | --libexe=* | --libex=* | --libe=*)

- libexecdir=$ac_optarg ;;

-

- -localedir | --localedir | --localedi | --localed | --locale)

- ac_prev=localedir ;;

- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)

- localedir=$ac_optarg ;;

-

- -localstatedir | --localstatedir | --localstatedi | --localstated \

- | --localstate | --localstat | --localsta | --localst | --locals)

- ac_prev=localstatedir ;;

- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \

- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)

- localstatedir=$ac_optarg ;;

-

- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)

- ac_prev=mandir ;;

- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)

- mandir=$ac_optarg ;;

-

- -nfp | --nfp | --nf)

- # Obsolete; use --without-fp.

- with_fp=no ;;

-

- -no-create | --no-create | --no-creat | --no-crea | --no-cre \

- | --no-cr | --no-c | -n)

- no_create=yes ;;

-

- -no-recursion | --no-recursion | --no-recursio | --no-recursi \

- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)

- no_recursion=yes ;;

-

- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \

- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \

- | --oldin | --oldi | --old | --ol | --o)

- ac_prev=oldincludedir ;;

- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \

- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \

- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)

- oldincludedir=$ac_optarg ;;

-

- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)

- ac_prev=prefix ;;

- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)

- prefix=$ac_optarg ;;

-

- -program-prefix | --program-prefix | --program-prefi | --program-pref \

- | --program-pre | --program-pr | --program-p)

- ac_prev=program_prefix ;;

- -program-prefix=* | --program-prefix=* | --program-prefi=* \

- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)

- program_prefix=$ac_optarg ;;

-

- -program-suffix | --program-suffix | --program-suffi | --program-suff \

- | --program-suf | --program-su | --program-s)

- ac_prev=program_suffix ;;

- -program-suffix=* | --program-suffix=* | --program-suffi=* \

- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)

- program_suffix=$ac_optarg ;;

-

- -program-transform-name | --program-transform-name \

- | --program-transform-nam | --program-transform-na \

- | --program-transform-n | --program-transform- \

- | --program-transform | --program-transfor \

- | --program-transfo | --program-transf \

- | --program-trans | --program-tran \

- | --progr-tra | --program-tr | --program-t)

- ac_prev=program_transform_name ;;

- -program-transform-name=* | --program-transform-name=* \

- | --program-transform-nam=* | --program-transform-na=* \

- | --program-transform-n=* | --program-transform-=* \

- | --program-transform=* | --program-transfor=* \

- | --program-transfo=* | --program-transf=* \

- | --program-trans=* | --program-tran=* \

- | --progr-tra=* | --program-tr=* | --program-t=*)

- program_transform_name=$ac_optarg ;;

-

- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)

- ac_prev=pdfdir ;;

- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)

- pdfdir=$ac_optarg ;;

-

- -psdir | --psdir | --psdi | --psd | --ps)

- ac_prev=psdir ;;

- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)

- psdir=$ac_optarg ;;

-

- -q | -quiet | --quiet | --quie | --qui | --qu | --q \

- | -silent | --silent | --silen | --sile | --sil)

- silent=yes ;;

-

- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)

- ac_prev=sbindir ;;

- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \

- | --sbi=* | --sb=*)

- sbindir=$ac_optarg ;;

-

- -sharedstatedir | --sharedstatedir | --sharedstatedi \

- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \

- | --sharedst | --shareds | --shared | --share | --shar \

- | --sha | --sh)

- ac_prev=sharedstatedir ;;

- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \

- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \

- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \

- | --sha=* | --sh=*)

- sharedstatedir=$ac_optarg ;;

-

- -site | --site | --sit)

- ac_prev=site ;;

- -site=* | --site=* | --sit=*)

- site=$ac_optarg ;;

-

- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)

- ac_prev=srcdir ;;

- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)

- srcdir=$ac_optarg ;;

-

- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \

- | --syscon | --sysco | --sysc | --sys | --sy)

- ac_prev=sysconfdir ;;

- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \

- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)

- sysconfdir=$ac_optarg ;;

-

- -target | --target | --targe | --targ | --tar | --ta | --t)

- ac_prev=target_alias ;;

- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)

- target_alias=$ac_optarg ;;

-

- -v | -verbose | --verbose | --verbos | --verbo | --verb)

- verbose=yes ;;

-

- -version | --version | --versio | --versi | --vers | -V)

- ac_init_version=: ;;

-

- -with-* | --with-*)

- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`

- # Reject names that are not valid shell variable names.

- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&

- as_fn_error $? "invalid package name: $ac_useropt"

- ac_useropt_orig=$ac_useropt

- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`

- case $ac_user_opts in

- *"

-"with_$ac_useropt"

-"*) ;;

- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"

- ac_unrecognized_sep=', ';;

- esac

- eval with_$ac_useropt=\$ac_optarg ;;

-

- -without-* | --without-*)

- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`

- # Reject names that are not valid shell variable names.

- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&

- as_fn_error $? "invalid package name: $ac_useropt"

- ac_useropt_orig=$ac_useropt

- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`

- case $ac_user_opts in

- *"

-"with_$ac_useropt"

-"*) ;;

- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"

- ac_unrecognized_sep=', ';;

- esac

- eval with_$ac_useropt=no ;;

-

- --x)

- # Obsolete; use --with-x.

- with_x=yes ;;

-

- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \

- | --x-incl | --x-inc | --x-in | --x-i)

- ac_prev=x_includes ;;

- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \

- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)

- x_includes=$ac_optarg ;;

-

- -x-libraries | --x-libraries | --x-librarie | --x-librari \

- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)

- ac_prev=x_libraries ;;

- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \

- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)

- x_libraries=$ac_optarg ;;

-

- -*) as_fn_error $? "unrecognized option: \`$ac_option'

-Try \`$0 --help' for more information"

- ;;

-

- *=*)

- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`

- # Reject names that are not valid shell variable names.

- case $ac_envvar in #(

- '' | [0-9]* | *[!_$as_cr_alnum]* )

- as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;

- esac

- eval $ac_envvar=\$ac_optarg

- export $ac_envvar ;;

-

- *)

- # FIXME: should be removed in autoconf 3.0.

- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2

- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&

- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2

- : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"

- ;;

-

- esac

-done

-

-if test -n "$ac_prev"; then

- ac_option=--`echo $ac_prev | sed 's/_/-/g'`

- as_fn_error $? "missing argument to $ac_option"

-fi

-

-if test -n "$ac_unrecognized_opts"; then

- case $enable_option_checking in

- no) ;;

- fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;

- *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;

- esac

-fi

-

-# Check all directory arguments for consistency.

-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \

- datadir sysconfdir sharedstatedir localstatedir includedir \

- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \

- libdir localedir mandir

-do

- eval ac_val=\$$ac_var

- # Remove trailing slashes.

- case $ac_val in

- */ )

- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`

- eval $ac_var=\$ac_val;;

- esac

- # Be sure to have absolute directory names.

- case $ac_val in

- [\\/$]* | ?:[\\/]* ) continue;;

- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;

- esac

- as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"

-done

-

-# There might be people who depend on the old broken behavior: `$host'

-# used to hold the argument of --host etc.

-# FIXME: To remove some day.

-build=$build_alias

-host=$host_alias

-target=$target_alias

-

-# FIXME: To remove some day.

-if test "x$host_alias" != x; then

- if test "x$build_alias" = x; then

- cross_compiling=maybe

- $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.

- If a cross compiler is detected then cross compile mode will be used" >&2

- elif test "x$build_alias" != "x$host_alias"; then

- cross_compiling=yes

- fi

-fi

-

-ac_tool_prefix=

-test -n "$host_alias" && ac_tool_prefix=$host_alias-

-

-test "$silent" = yes && exec 6>/dev/null

-

-

-ac_pwd=`pwd` && test -n "$ac_pwd" &&

-ac_ls_di=`ls -di .` &&

-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||

- as_fn_error $? "working directory cannot be determined"

-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||

- as_fn_error $? "pwd does not report name of working directory"

-

-

-# Find the source files, if location was not specified.

-if test -z "$srcdir"; then

- ac_srcdir_defaulted=yes

- # Try the directory containing this script, then the parent directory.

- ac_confdir=`$as_dirname -- "$as_myself" ||

-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \

- X"$as_myself" : 'X\(//\)[^/]' \| \

- X"$as_myself" : 'X\(//\)$' \| \

- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||

-$as_echo X"$as_myself" |

- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{

- s//\1/

- q

- }

- /^X\(\/\/\)[^/].*/{

- s//\1/

- q

- }

- /^X\(\/\/\)$/{

- s//\1/

- q

- }

- /^X\(\/\).*/{

- s//\1/

- q

- }

- s/.*/./; q'`

- srcdir=$ac_confdir

- if test ! -r "$srcdir/$ac_unique_file"; then

- srcdir=..

- fi

-else

- ac_srcdir_defaulted=no

-fi

-if test ! -r "$srcdir/$ac_unique_file"; then

- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."

- as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"

-fi

-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"

-ac_abs_confdir=`(

- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"

- pwd)`

-# When building in place, set srcdir=.

-if test "$ac_abs_confdir" = "$ac_pwd"; then

- srcdir=.

-fi

-# Remove unnecessary trailing slashes from srcdir.

-# Double slashes in file names in object file debugging info

-# mess up M-x gdb in Emacs.

-case $srcdir in

-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;

-esac

-for ac_var in $ac_precious_vars; do

- eval ac_env_${ac_var}_set=\${${ac_var}+set}

- eval ac_env_${ac_var}_value=\$${ac_var}

- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}

- eval ac_cv_env_${ac_var}_value=\$${ac_var}

-done

-

-#

-# Report the --help message.

-#

-if test "$ac_init_help" = "long"; then

- # Omit some internal or obsolete options to make the list less imposing.

- # This message is too long to be a string in the A/UX 3.1 sh.

- cat <<_ACEOF

-\`configure' configures mate-common 2011.10.29 to adapt to many kinds of systems.

-

-Usage: $0 [OPTION]... [VAR=VALUE]...

-

-To assign environment variables (e.g., CC, CFLAGS...), specify them as

-VAR=VALUE. See below for descriptions of some of the useful variables.

-

-Defaults for the options are specified in brackets.

-

-Configuration:

- -h, --help display this help and exit

- --help=short display options specific to this package

- --help=recursive display the short help of all the included packages

- -V, --version display version information and exit

- -q, --quiet, --silent do not print \`checking ...' messages

- --cache-file=FILE cache test results in FILE [disabled]

- -C, --config-cache alias for \`--cache-file=config.cache'

- -n, --no-create do not create output files

- --srcdir=DIR find the sources in DIR [configure dir or \`..']

-

-Installation directories:

- --prefix=PREFIX install architecture-independent files in PREFIX

- [$ac_default_prefix]

- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX

- [PREFIX]

-

-By default, \`make install' will install all the files in

-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify

-an installation prefix other than \`$ac_default_prefix' using \`--prefix',

-for instance \`--prefix=\$HOME'.

-

-For better control, use the options below.

-

-Fine tuning of the installation directories:

- --bindir=DIR user executables [EPREFIX/bin]

- --sbindir=DIR system admin executables [EPREFIX/sbin]

- --libexecdir=DIR program executables [EPREFIX/libexec]

- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]

- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]

- --localstatedir=DIR modifiable single-machine data [PREFIX/var]

- --libdir=DIR object code libraries [EPREFIX/lib]

- --includedir=DIR C header files [PREFIX/include]

- --oldincludedir=DIR C header files for non-gcc [/usr/include]

- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]

- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]

- --infodir=DIR info documentation [DATAROOTDIR/info]

- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]

- --mandir=DIR man documentation [DATAROOTDIR/man]

- --docdir=DIR documentation root [DATAROOTDIR/doc/mate-common]

- --htmldir=DIR html documentation [DOCDIR]

- --dvidir=DIR dvi documentation [DOCDIR]

- --pdfdir=DIR pdf documentation [DOCDIR]

- --psdir=DIR ps documentation [DOCDIR]

-_ACEOF

-

- cat <<\_ACEOF

-

-Program names:

- --program-prefix=PREFIX prepend PREFIX to installed program names

- --program-suffix=SUFFIX append SUFFIX to installed program names

- --program-transform-name=PROGRAM run sed PROGRAM on installed program names

-_ACEOF

-fi

-

-if test -n "$ac_init_help"; then

- case $ac_init_help in

- short | recursive ) echo "Configuration of mate-common 2011.10.29:";;

- esac

- cat <<\_ACEOF

-

-Optional Features:

- --disable-option-checking ignore unrecognized --enable/--with options

- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)

- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]

- --enable-silent-rules less verbose build output (undo: `make V=1')

- --disable-silent-rules verbose build output (undo: `make V=0')

- --disable-maintainer-mode disable make rules and dependencies not useful

- (and sometimes confusing) to the casual installer

-

-Report bugs to <https://github.com/perberos/mate-desktop-environment>.

-_ACEOF

-ac_status=$?

-fi

-

-if test "$ac_init_help" = "recursive"; then

- # If there are subdirs, report their specific --help.

- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue

- test -d "$ac_dir" ||

- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||

- continue

- ac_builddir=.

-

-case "$ac_dir" in

-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;

-*)

- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`

- # A ".." for each directory in $ac_dir_suffix.

- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`

- case $ac_top_builddir_sub in

- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;

- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;

- esac ;;

-esac

-ac_abs_top_builddir=$ac_pwd

-ac_abs_builddir=$ac_pwd$ac_dir_suffix

-# for backward compatibility:

-ac_top_builddir=$ac_top_build_prefix

-

-case $srcdir in

- .) # We are building in place.

- ac_srcdir=.

- ac_top_srcdir=$ac_top_builddir_sub

- ac_abs_top_srcdir=$ac_pwd ;;

- [\\/]* | ?:[\\/]* ) # Absolute name.

- ac_srcdir=$srcdir$ac_dir_suffix;

- ac_top_srcdir=$srcdir

- ac_abs_top_srcdir=$srcdir ;;

- *) # Relative name.

- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix

- ac_top_srcdir=$ac_top_build_prefix$srcdir

- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;

-esac

-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix

-

- cd "$ac_dir" || { ac_status=$?; continue; }

- # Check for guested configure.

- if test -f "$ac_srcdir/configure.gnu"; then

- echo &&

- $SHELL "$ac_srcdir/configure.gnu" --help=recursive

- elif test -f "$ac_srcdir/configure"; then

- echo &&

- $SHELL "$ac_srcdir/configure" --help=recursive

- else

- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2

- fi || ac_status=$?

- cd "$ac_pwd" || { ac_status=$?; break; }

- done

-fi

-

-test -n "$ac_init_help" && exit $ac_status

-if $ac_init_version; then

- cat <<\_ACEOF

-mate-common configure 2011.10.29

-generated by GNU Autoconf 2.68

-

-Copyright (C) 2010 Free Software Foundation, Inc.

-This configure script is free software; the Free Software Foundation

-gives unlimited permission to copy, distribute and modify it.

-_ACEOF

- exit

-fi

-

-## ------------------------ ##

-## Autoconf initialization. ##

-## ------------------------ ##

-cat >config.log <<_ACEOF

-This file contains any messages produced by compilers while

-running configure, to aid debugging if configure makes a mistake.

-

-It was created by mate-common $as_me 2011.10.29, which was

-generated by GNU Autoconf 2.68. Invocation command line was

-

- $ $0 $@

-

-_ACEOF

-exec 5>>config.log

-{

-cat <<_ASUNAME

-## --------- ##

-## Platform. ##

-## --------- ##

-

-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`

-uname -m = `(uname -m) 2>/dev/null || echo unknown`

-uname -r = `(uname -r) 2>/dev/null || echo unknown`

-uname -s = `(uname -s) 2>/dev/null || echo unknown`

-uname -v = `(uname -v) 2>/dev/null || echo unknown`

-

-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`

-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`

-

-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`

-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`

-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`

-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`

-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`

-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`

-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`

-

-_ASUNAME

-

-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR

-for as_dir in $PATH

-do

- IFS=$as_save_IFS

- test -z "$as_dir" && as_dir=.

- $as_echo "PATH: $as_dir"

- done

-IFS=$as_save_IFS

-

-} >&5

-

-cat >&5 <<_ACEOF

-

-

-## ----------- ##

-## Core tests. ##

-## ----------- ##

-

-_ACEOF

-

-

-# Keep a trace of the command line.

-# Strip out --no-create and --no-recursion so they do not pile up.

-# Strip out --silent because we don't want to record it for future runs.

-# Also quote any args containing shell meta-characters.

-# Make two passes to allow for proper duplicate-argument suppression.

-ac_configure_args=

-ac_configure_args0=

-ac_configure_args1=

-ac_must_keep_next=false

-for ac_pass in 1 2

-do

- for ac_arg

- do

- case $ac_arg in

- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;

- -q | -quiet | --quiet | --quie | --qui | --qu | --q \

- | -silent | --silent | --silen | --sile | --sil)

- continue ;;

- *\'*)

- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;

- esac

- case $ac_pass in

- 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;

- 2)

- as_fn_append ac_configure_args1 " '$ac_arg'"

- if test $ac_must_keep_next = true; then

- ac_must_keep_next=false # Got value, back to normal.

- else

- case $ac_arg in

- *=* | --config-cache | -C | -disable-* | --disable-* \

- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \

- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \

- | -with-* | --with-* | -without-* | --without-* | --x)

- case "$ac_configure_args0 " in

- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;

- esac

- ;;

- -* ) ac_must_keep_next=true ;;

- esac

- fi

- as_fn_append ac_configure_args " '$ac_arg'"

- ;;

- esac

- done

-done

-{ ac_configure_args0=; unset ac_configure_args0;}

-{ ac_configure_args1=; unset ac_configure_args1;}

-

-# When interrupted or exit'd, cleanup temporary files, and complete

-# config.log. We remove comments because anyway the quotes in there

-# would cause problems or look ugly.

-# WARNING: Use '\'' to represent an apostrophe within the trap.

-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.

-trap 'exit_status=$?

- # Save into config.log some information that might help in debugging.

- {

- echo

-

- $as_echo "## ---------------- ##

-## Cache variables. ##

-## ---------------- ##"

- echo

- # The following way of writing the cache mishandles newlines in values,

-(

- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do

- eval ac_val=\$$ac_var

- case $ac_val in #(

- *${as_nl}*)

- case $ac_var in #(

- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5

-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;

- esac

- case $ac_var in #(

- _ | IFS | as_nl) ;; #(

- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(

- *) { eval $ac_var=; unset $ac_var;} ;;

- esac ;;

- esac

- done

- (set) 2>&1 |

- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(

- *${as_nl}ac_space=\ *)

- sed -n \

- "s/'\''/'\''\\\\'\'''\''/g;

- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"

- ;; #(

- *)

- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"

- ;;

- esac |

- sort

-)

- echo

-

- $as_echo "## ----------------- ##

-## Output variables. ##

-## ----------------- ##"

- echo

- for ac_var in $ac_subst_vars

- do

- eval ac_val=\$$ac_var

- case $ac_val in

- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;

- esac

- $as_echo "$ac_var='\''$ac_val'\''"

- done | sort

- echo

-

- if test -n "$ac_subst_files"; then

- $as_echo "## ------------------- ##

-## File substitutions. ##

-## ------------------- ##"

- echo

- for ac_var in $ac_subst_files

- do

- eval ac_val=\$$ac_var

- case $ac_val in

- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;

- esac

- $as_echo "$ac_var='\''$ac_val'\''"

- done | sort

- echo

- fi

-

- if test -s confdefs.h; then

- $as_echo "## ----------- ##

-## confdefs.h. ##

-## ----------- ##"

- echo

- cat confdefs.h

- echo

- fi

- test "$ac_signal" != 0 &&

- $as_echo "$as_me: caught signal $ac_signal"

- $as_echo "$as_me: exit $exit_status"

- } >&5

- rm -f core *.core core.conftest.* &&

- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&

- exit $exit_status

-' 0

-for ac_signal in 1 2 13 15; do

- trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal

-done

-ac_signal=0

-

-# confdefs.h avoids OS command line length limits that DEFS can exceed.

-rm -f -r conftest* confdefs.h

-

-$as_echo "/* confdefs.h */" > confdefs.h

-

-# Predefined preprocessor variables.

-

-cat >>confdefs.h <<_ACEOF

-#define PACKAGE_NAME "$PACKAGE_NAME"

-_ACEOF

-

-cat >>confdefs.h <<_ACEOF

-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"

-_ACEOF

-

-cat >>confdefs.h <<_ACEOF

-#define PACKAGE_VERSION "$PACKAGE_VERSION"

-_ACEOF

-

-cat >>confdefs.h <<_ACEOF

-#define PACKAGE_STRING "$PACKAGE_STRING"

-_ACEOF

-

-cat >>confdefs.h <<_ACEOF

-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"

-_ACEOF

-

-cat >>confdefs.h <<_ACEOF

-#define PACKAGE_URL "$PACKAGE_URL"

-_ACEOF

-

-

-# Let the site file select an alternate cache file if it wants to.

-# Prefer an explicitly selected file to automatically selected ones.

-ac_site_file1=NONE

-ac_site_file2=NONE

-if test -n "$CONFIG_SITE"; then

- # We do not want a PATH search for config.site.

- case $CONFIG_SITE in #((

- -*) ac_site_file1=./$CONFIG_SITE;;

- */*) ac_site_file1=$CONFIG_SITE;;

- *) ac_site_file1=./$CONFIG_SITE;;

- esac

-elif test "x$prefix" != xNONE; then

- ac_site_file1=$prefix/share/config.site

- ac_site_file2=$prefix/etc/config.site

-else

- ac_site_file1=$ac_default_prefix/share/config.site

- ac_site_file2=$ac_default_prefix/etc/config.site

-fi

-for ac_site_file in "$ac_site_file1" "$ac_site_file2"

-do

- test "x$ac_site_file" = xNONE && continue

- if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then

- { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5

-$as_echo "$as_me: loading site script $ac_site_file" >&6;}

- sed 's/^/| /' "$ac_site_file" >&5

- . "$ac_site_file" \

- || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5

-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}

-as_fn_error $? "failed to load site script $ac_site_file

-See \`config.log' for more details" "$LINENO" 5; }

- fi

-done

-

-if test -r "$cache_file"; then

- # Some versions of bash will fail to source /dev/null (special files

- # actually), so we avoid doing that. DJGPP emulates it as a regular file.

- if test /dev/null != "$cache_file" && test -f "$cache_file"; then

- { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5

-$as_echo "$as_me: loading cache $cache_file" >&6;}

- case $cache_file in

- [\\/]* | ?:[\\/]* ) . "$cache_file";;

- *) . "./$cache_file";;

- esac

- fi

-else

- { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5

-$as_echo "$as_me: creating cache $cache_file" >&6;}

- >$cache_file

-fi

-

-# Check that the precious variables saved in the cache have kept the same

-# value.

-ac_cache_corrupted=false

-for ac_var in $ac_precious_vars; do

- eval ac_old_set=\$ac_cv_env_${ac_var}_set

- eval ac_new_set=\$ac_env_${ac_var}_set

- eval ac_old_val=\$ac_cv_env_${ac_var}_value

- eval ac_new_val=\$ac_env_${ac_var}_value

- case $ac_old_set,$ac_new_set in

- set,)

- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5

-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}

- ac_cache_corrupted=: ;;

- ,set)

- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5

-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}

- ac_cache_corrupted=: ;;

- ,);;

- *)

- if test "x$ac_old_val" != "x$ac_new_val"; then

- # differences in whitespace do not lead to failure.

- ac_old_val_w=`echo x $ac_old_val`

- ac_new_val_w=`echo x $ac_new_val`

- if test "$ac_old_val_w" != "$ac_new_val_w"; then

- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5

-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}

- ac_cache_corrupted=:

- else

- { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5

-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}

- eval $ac_var=\$ac_old_val

- fi

- { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5

-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}

- { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5

-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}

- fi;;

- esac

- # Pass precious variables to config.status.

- if test "$ac_new_set" = set; then

- case $ac_new_val in

- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;

- *) ac_arg=$ac_var=$ac_new_val ;;

- esac

- case " $ac_configure_args " in

- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.

- *) as_fn_append ac_configure_args " '$ac_arg'" ;;

- esac

- fi

-done

-if $ac_cache_corrupted; then

- { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5

-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}

- { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5

-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}

- as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5

-fi

-## -------------------- ##

-## Main body of script. ##

-## -------------------- ##

-

-ac_ext=c

-ac_cpp='$CPP $CPPFLAGS'

-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'

-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'

-ac_compiler_gnu=$ac_cv_c_compiler_gnu

-

-

-

-

-

-am__api_version='1.11'

-

-ac_aux_dir=

-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do

- if test -f "$ac_dir/install-sh"; then

- ac_aux_dir=$ac_dir

- ac_install_sh="$ac_aux_dir/install-sh -c"

- break

- elif test -f "$ac_dir/install.sh"; then

- ac_aux_dir=$ac_dir

- ac_install_sh="$ac_aux_dir/install.sh -c"

- break

- elif test -f "$ac_dir/shtool"; then

- ac_aux_dir=$ac_dir

- ac_install_sh="$ac_aux_dir/shtool install -c"

- break

- fi

-done

-if test -z "$ac_aux_dir"; then

- as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5

-fi

-

-# These three variables are undocumented and unsupported,

-# and are intended to be withdrawn in a future Autoconf release.

-# They can cause serious problems if a builder's source tree is in a directory

-# whose full name contains unusual characters.

-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.

-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.

-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.

-

-

-# Find a good install program. We prefer a C program (faster),

-# so one script is as good as another. But avoid the broken or

-# incompatible versions:

-# SysV /etc/install, /usr/sbin/install

-# SunOS /usr/etc/install

-# IRIX /sbin/install

-# AIX /bin/install

-# AmigaOS /C/install, which installs bootblocks on floppy discs

-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag

-# AFS /usr/afsws/bin/install, which mishandles nonexistent args

-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"

-# OS/2's system install, which has a completely different semantic

-# ./install, which can be erroneously created by make from ./install.sh.

-# Reject install programs that cannot install multiple files.

-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5

-$as_echo_n "checking for a BSD-compatible install... " >&6; }

-if test -z "$INSTALL"; then

-if ${ac_cv_path_install+:} false; then :

- $as_echo_n "(cached) " >&6

-else

- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR

-for as_dir in $PATH

-do

- IFS=$as_save_IFS

- test -z "$as_dir" && as_dir=.

- # Account for people who put trailing slashes in PATH elements.

-case $as_dir/ in #((

- ./ | .// | /[cC]/* | \

- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \

- ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \

- /usr/ucb/* ) ;;

- *)

- # OSF1 and SCO ODT 3.0 have their own names for install.

- # Don't use installbsd from OSF since it installs stuff as root

- # by default.

- for ac_prog in ginstall scoinst install; do

- for ac_exec_ext in '' $ac_executable_extensions; do

- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then

- if test $ac_prog = install &&

- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then

- # AIX install. It has an incompatible calling convention.

- :

- elif test $ac_prog = install &&

- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then

- # program-specific install script used by HP pwplus--don't use.

- :

- else

- rm -rf conftest.one conftest.two conftest.dir

- echo one > conftest.one

- echo two > conftest.two

- mkdir conftest.dir

- if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&

- test -s conftest.one && test -s conftest.two &&

- test -s conftest.dir/conftest.one &&

- test -s conftest.dir/conftest.two

- then

- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"

- break 3

- fi

- fi

- fi

- done

- done

- ;;

-esac

-

- done

-IFS=$as_save_IFS

-

-rm -rf conftest.one conftest.two conftest.dir

-

-fi

- if test "${ac_cv_path_install+set}" = set; then

- INSTALL=$ac_cv_path_install

- else

- # As a last resort, use the slow shell script. Don't cache a

- # value for INSTALL within a source directory, because that will

- # break other packages using the cache if that directory is

- # removed, or if the value is a relative name.

- INSTALL=$ac_install_sh

- fi

-fi

-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5

-$as_echo "$INSTALL" >&6; }

-

-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.

-# It thinks the first close brace ends the variable substitution.

-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

-

-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'

-

-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'

-

-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5

-$as_echo_n "checking whether build environment is sane... " >&6; }

-# Just in case

-sleep 1

-echo timestamp > conftest.file

-# Reject unsafe characters in $srcdir or the absolute working directory

-# name. Accept space and tab only in the latter.

-am_lf='

-'

-case `pwd` in

- *[\\\"\#\$\&\'\`$am_lf]*)

- as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;

-esac

-case $srcdir in

- *[\\\"\#\$\&\'\`$am_lf\ \ ]*)

- as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;

-esac

-

-# Do `set' in a subshell so we don't clobber the current shell's

-# arguments. Must try -L first in case configure is actually a

-# symlink; some systems play weird games with the mod time of symlinks

-# (eg FreeBSD returns the mod time of the symlink's containing

-# directory).

-if (

- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`

- if test "$*" = "X"; then

- # -L didn't work.

- set X `ls -t "$srcdir/configure" conftest.file`

- fi

- rm -f conftest.file

- if test "$*" != "X $srcdir/configure conftest.file" \

- && test "$*" != "X conftest.file $srcdir/configure"; then

-

- # If neither matched, then we have a broken ls. This can happen

- # if, for instance, CONFIG_SHELL is bash and it inherits a

- # broken ls alias from the environment. This has actually

- # happened. Such a system could not be considered "sane".

- as_fn_error $? "ls -t appears to fail. Make sure there is not a broken

-alias in your environment" "$LINENO" 5

- fi

-

- test "$2" = conftest.file

- )

-then

- # Ok.

- :

-else

- as_fn_error $? "newly created file is older than distributed files!

-Check your system clock" "$LINENO" 5

-fi

-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5

-$as_echo "yes" >&6; }

-test "$program_prefix" != NONE &&

- program_transform_name="s&^&$program_prefix&;$program_transform_name"

-# Use a double $ so make ignores it.

-test "$program_suffix" != NONE &&

- program_transform_name="s&\$&$program_suffix&;$program_transform_name"

-# Double any \ or $.

-# By default was `s,x,x', remove it if useless.

-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'

-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`

-

-# expand $ac_aux_dir to an absolute path

-am_aux_dir=`cd $ac_aux_dir && pwd`

-

-if test x"${MISSING+set}" != xset; then

- case $am_aux_dir in

- *\ * | *\ *)

- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;

- *)

- MISSING="\${SHELL} $am_aux_dir/missing" ;;

- esac

-fi

-# Use eval to expand $SHELL

-if eval "$MISSING --run true"; then

- am_missing_run="$MISSING --run "

-else

- am_missing_run=

- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5

-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}

-fi

-

-if test x"${install_sh}" != xset; then

- case $am_aux_dir in

- *\ * | *\ *)

- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;

- *)

- install_sh="\${SHELL} $am_aux_dir/install-sh"

- esac

-fi

-

-# Installed binaries are usually stripped using `strip' when the user

-# run `make install-strip'. However `strip' might not be the right

-# tool to use in cross-compilation environments, therefore Automake

-# will honor the `STRIP' environment variable to overrule this program.

-if test "$cross_compiling" != no; then

- if test -n "$ac_tool_prefix"; then

- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.

-set dummy ${ac_tool_prefix}strip; ac_word=$2

-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5

-$as_echo_n "checking for $ac_word... " >&6; }

-if ${ac_cv_prog_STRIP+:} false; then :

- $as_echo_n "(cached) " >&6

-else

- if test -n "$STRIP"; then

- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.

-else

-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR

-for as_dir in $PATH

-do

- IFS=$as_save_IFS

- test -z "$as_dir" && as_dir=.

- for ac_exec_ext in '' $ac_executable_extensions; do

- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then

- ac_cv_prog_STRIP="${ac_tool_prefix}strip"

- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5

- break 2

- fi

-done

- done

-IFS=$as_save_IFS

-

-fi

-fi

-STRIP=$ac_cv_prog_STRIP

-if test -n "$STRIP"; then

- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5

-$as_echo "$STRIP" >&6; }

-else

- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5

-$as_echo "no" >&6; }

-fi

-

-

-fi

-if test -z "$ac_cv_prog_STRIP"; then

- ac_ct_STRIP=$STRIP

- # Extract the first word of "strip", so it can be a program name with args.

-set dummy strip; ac_word=$2

-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5

-$as_echo_n "checking for $ac_word... " >&6; }

-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :

- $as_echo_n "(cached) " >&6

-else

- if test -n "$ac_ct_STRIP"; then

- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.

-else

-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR

-for as_dir in $PATH

-do

- IFS=$as_save_IFS

- test -z "$as_dir" && as_dir=.

- for ac_exec_ext in '' $ac_executable_extensions; do

- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then

- ac_cv_prog_ac_ct_STRIP="strip"

- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5

- break 2

- fi

-done

- done

-IFS=$as_save_IFS

-

-fi

-fi

-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP

-if test -n "$ac_ct_STRIP"; then

- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5

-$as_echo "$ac_ct_STRIP" >&6; }

-else

- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5

-$as_echo "no" >&6; }

-fi

-

- if test "x$ac_ct_STRIP" = x; then

- STRIP=":"

- else

- case $cross_compiling:$ac_tool_warned in

-yes:)

-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5

-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}

-ac_tool_warned=yes ;;

-esac

- STRIP=$ac_ct_STRIP

- fi

-else

- STRIP="$ac_cv_prog_STRIP"

-fi

-

-fi

-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"

-

-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5

-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }

-if test -z "$MKDIR_P"; then

- if ${ac_cv_path_mkdir+:} false; then :

- $as_echo_n "(cached) " >&6

-else

- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR

-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin

-do

- IFS=$as_save_IFS

- test -z "$as_dir" && as_dir=.

- for ac_prog in mkdir gmkdir; do

- for ac_exec_ext in '' $ac_executable_extensions; do

- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue

- case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(

- 'mkdir (GNU coreutils) '* | \

- 'mkdir (coreutils) '* | \

- 'mkdir (fileutils) '4.1*)

- ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext

- break 3;;

- esac

- done

- done

- done

-IFS=$as_save_IFS

-

-fi

-

- test -d ./--version && rmdir ./--version

- if test "${ac_cv_path_mkdir+set}" = set; then

- MKDIR_P="$ac_cv_path_mkdir -p"

- else

- # As a last resort, use the slow shell script. Don't cache a

- # value for MKDIR_P within a source directory, because that will

- # break other packages using the cache if that directory is

- # removed, or if the value is a relative name.

- MKDIR_P="$ac_install_sh -d"

- fi

-fi

-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5

-$as_echo "$MKDIR_P" >&6; }

-

-mkdir_p="$MKDIR_P"

-case $mkdir_p in

- [\\/$]* | ?:[\\/]*) ;;

- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;

-esac

-

-for ac_prog in gawk mawk nawk awk

-do

- # Extract the first word of "$ac_prog", so it can be a program name with args.

-set dummy $ac_prog; ac_word=$2

-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5

-$as_echo_n "checking for $ac_word... " >&6; }

-if ${ac_cv_prog_AWK+:} false; then :

- $as_echo_n "(cached) " >&6

-else

- if test -n "$AWK"; then

- ac_cv_prog_AWK="$AWK" # Let the user override the test.

-else

-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR

-for as_dir in $PATH

-do

- IFS=$as_save_IFS

- test -z "$as_dir" && as_dir=.

- for ac_exec_ext in '' $ac_executable_extensions; do

- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then

- ac_cv_prog_AWK="$ac_prog"

- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5

- break 2

- fi

-done

- done

-IFS=$as_save_IFS

-

-fi

-fi

-AWK=$ac_cv_prog_AWK

-if test -n "$AWK"; then

- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5

-$as_echo "$AWK" >&6; }

-else

- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5

-$as_echo "no" >&6; }

-fi

-

-

- test -n "$AWK" && break

-done

-

-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5

-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }

-set x ${MAKE-make}

-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`

-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :

- $as_echo_n "(cached) " >&6

-else

- cat >conftest.make <<\_ACEOF

-SHELL = /bin/sh

-all:

- @echo '@@@%%%=$(MAKE)=@@@%%%'

-_ACEOF

-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.

-case `${MAKE-make} -f conftest.make 2>/dev/null` in

- *@@@%%%=?*=@@@%%%*)

- eval ac_cv_prog_make_${ac_make}_set=yes;;

- *)

- eval ac_cv_prog_make_${ac_make}_set=no;;

-esac

-rm -f conftest.make

-fi

-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then

- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5

-$as_echo "yes" >&6; }

- SET_MAKE=

-else

- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5

-$as_echo "no" >&6; }

- SET_MAKE="MAKE=${MAKE-make}"

-fi

-

-rm -rf .tst 2>/dev/null

-mkdir .tst 2>/dev/null

-if test -d .tst; then

- am__leading_dot=.

-else

- am__leading_dot=_

-fi

-rmdir .tst 2>/dev/null

-

-if test "`cd $srcdir && pwd`" != "`pwd`"; then

- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output

- # is not polluted with repeated "-I."

- am__isrc=' -I$(srcdir)'

- # test to see if srcdir already configured

- if test -f $srcdir/config.status; then

- as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5

- fi

-fi

-

-# test whether we have cygpath

-if test -z "$CYGPATH_W"; then

- if (cygpath --version) >/dev/null 2>/dev/null; then

- CYGPATH_W='cygpath -w'

- else

- CYGPATH_W=echo

- fi

-fi

-

-

-# Define the identity of the package.

- PACKAGE='mate-common'

- VERSION='2011.10.29'

-

-

-cat >>confdefs.h <<_ACEOF

-#define PACKAGE "$PACKAGE"

-_ACEOF

-

-

-cat >>confdefs.h <<_ACEOF

-#define VERSION "$VERSION"

-_ACEOF

-

-# Some tools Automake needs.

-

-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}

-

-

-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}

-

-

-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}

-

-

-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}

-

-

-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}

-

-# We need awk for the "check" target. The system "awk" is bad on

-# some platforms.

-# Always define AMTAR for backward compatibility.

-

-AMTAR=${AMTAR-"${am_missing_run}tar"}

-

-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'

-

-

-

-

-

-

-# Check whether --enable-silent-rules was given.

-if test "${enable_silent_rules+set}" = set; then :

- enableval=$enable_silent_rules;

-fi

-

-case $enable_silent_rules in

-yes) AM_DEFAULT_VERBOSITY=0;;

-no) AM_DEFAULT_VERBOSITY=1;;

-*) AM_DEFAULT_VERBOSITY=1;;

-esac

-AM_BACKSLASH='\'

-

-

-if test -z "$enable_maintainer_mode"; then

- enable_maintainer_mode=yes

-fi

-

-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to disable maintainer-specific portions of Makefiles" >&5

-$as_echo_n "checking whether to disable maintainer-specific portions of Makefiles... " >&6; }

- # Check whether --enable-maintainer-mode was given.

-if test "${enable_maintainer_mode+set}" = set; then :

- enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval

-else

- USE_MAINTAINER_MODE=yes

-fi

-

- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5

-$as_echo "$USE_MAINTAINER_MODE" >&6; }

- if test $USE_MAINTAINER_MODE = yes; then

- MAINTAINER_MODE_TRUE=

- MAINTAINER_MODE_FALSE='#'

-else

- MAINTAINER_MODE_TRUE='#'

- MAINTAINER_MODE_FALSE=

-fi

-

- MAINT=$MAINTAINER_MODE_TRUE

-

-

-

-ac_config_files="$ac_config_files Makefile mate-common.spec macros2/Makefile doc-build/Makefile doc-build/mate-doc-common"

-

-

-cat >confcache <<\_ACEOF

-# This file is a shell script that caches the results of configure

-# tests run on this system so they can be shared between configure

-# scripts and configure runs, see configure's option --config-cache.

-# It is not useful on other systems. If it contains results you don't

-# want to keep, you may remove or edit it.

-#

-# config.status only pays attention to the cache file if you give it

-# the --recheck option to rerun configure.

-#

-# `ac_cv_env_foo' variables (set or unset) will be overridden when

-# loading this file, other *unset* `ac_cv_foo' will be assigned the

-# following values.

-

-_ACEOF

-

-# The following way of writing the cache mishandles newlines in values,

-# but we know of no workaround that is simple, portable, and efficient.

-# So, we kill variables containing newlines.

-# Ultrix sh set writes to stderr and can't be redirected directly,

-# and sets the high bit in the cache file unless we assign to the vars.

-(

- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do

- eval ac_val=\$$ac_var

- case $ac_val in #(

- *${as_nl}*)

- case $ac_var in #(

- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5

-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;

- esac

- case $ac_var in #(

- _ | IFS | as_nl) ;; #(

- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(

- *) { eval $ac_var=; unset $ac_var;} ;;

- esac ;;

- esac

- done

-

- (set) 2>&1 |

- case $as_nl`(ac_space=' '; set) 2>&1` in #(

- *${as_nl}ac_space=\ *)

- # `set' does not quote correctly, so add quotes: double-quote

- # substitution turns \\\\ into \\, and sed turns \\ into \.

- sed -n \

- "s/'/'\\\\''/g;

- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"

- ;; #(

- *)

- # `set' quotes correctly as required by POSIX, so do not add quotes.

- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"

- ;;

- esac |

- sort

-) |

- sed '

- /^ac_cv_env_/b end

- t clear

- :clear

- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/

- t end

- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/

- :end' >>confcache

-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else

- if test -w "$cache_file"; then

- if test "x$cache_file" != "x/dev/null"; then

- { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5

-$as_echo "$as_me: updating cache $cache_file" >&6;}

- if test ! -f "$cache_file" || test -h "$cache_file"; then

- cat confcache >"$cache_file"

- else

- case $cache_file in #(

- */* | ?:*)

- mv -f confcache "$cache_file"$$ &&

- mv -f "$cache_file"$$ "$cache_file" ;; #(

- *)

- mv -f confcache "$cache_file" ;;

- esac

- fi

- fi

- else

- { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5

-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}

- fi

-fi

-rm -f confcache

-

-test "x$prefix" = xNONE && prefix=$ac_default_prefix

-# Let make expand exec_prefix.

-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

-

-# Transform confdefs.h into DEFS.

-# Protect against shell expansion while executing Makefile rules.

-# Protect against Makefile macro expansion.

-#

-# If the first sed substitution is executed (which looks for macros that

-# take arguments), then branch to the quote section. Otherwise,

-# look for a macro that doesn't take arguments.

-ac_script='

-:mline

-/\\$/{

- N

- s,\\\n,,

- b mline

-}

-t clear

-:clear

-s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g

-t quote

-s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g

-t quote

-b any

-:quote

-s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g

-s/\[/\\&/g

-s/\]/\\&/g

-s/\$/$$/g

-H

-:any

-${

- g

- s/^\n//

- s/\n/ /g

- p

-}

-'

-DEFS=`sed -n "$ac_script" confdefs.h`

-

-

-ac_libobjs=

-ac_ltlibobjs=

-U=

-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue

- # 1. Remove the extension, and $U if already installed.

- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'

- ac_i=`$as_echo "$ac_i" | sed "$ac_script"`

- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR

- # will be set to the directory where LIBOBJS objects are built.

- as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"

- as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'

-done

-LIBOBJS=$ac_libobjs

-

-LTLIBOBJS=$ac_ltlibobjs

-

-

-

-if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then

- as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.

-Usually this means the macro was only invoked conditionally." "$LINENO" 5

-fi

-

-: "${CONFIG_STATUS=./config.status}"

-ac_write_fail=0

-ac_clean_files_save=$ac_clean_files

-ac_clean_files="$ac_clean_files $CONFIG_STATUS"

-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5

-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}

-as_write_fail=0

-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1

-#! $SHELL

-# Generated by $as_me.

-# Run this file to recreate the current configuration.

-# Compiler output produced by configure, useful for debugging

-# configure, is in config.log if it exists.

-

-debug=false

-ac_cs_recheck=false

-ac_cs_silent=false

-

-SHELL=\${CONFIG_SHELL-$SHELL}

-export SHELL

-_ASEOF

-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1

-## -------------------- ##

-## M4sh Initialization. ##

-## -------------------- ##

-

-# Be more Bourne compatible

-DUALCASE=1; export DUALCASE # for MKS sh

-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :

- emulate sh

- NULLCMD=:

- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which

- # is contrary to our usage. Disable this feature.

- alias -g '${1+"$@"}'='"$@"'

- setopt NO_GLOB_SUBST

-else

- case `(set -o) 2>/dev/null` in #(

- *posix*) :

- set -o posix ;; #(

- *) :

- ;;

-esac

-fi

-

-

-as_nl='

-'

-export as_nl

-# Printing a long string crashes Solaris 7 /usr/bin/printf.

-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'

-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo

-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo

-# Prefer a ksh shell builtin over an external printf program on Solaris,

-# but without wasting forks for bash or zsh.

-if test -z "$BASH_VERSION$ZSH_VERSION" \

- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then

- as_echo='print -r --'

- as_echo_n='print -rn --'

-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then

- as_echo='printf %s\n'

- as_echo_n='printf %s'

-else

- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then

- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'

- as_echo_n='/usr/ucb/echo -n'

- else

- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'

- as_echo_n_body='eval

- arg=$1;

- case $arg in #(

- *"$as_nl"*)

- expr "X$arg" : "X\\(.*\\)$as_nl";

- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;

- esac;

- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"

- '

- export as_echo_n_body

- as_echo_n='sh -c $as_echo_n_body as_echo'

- fi

- export as_echo_body

- as_echo='sh -c $as_echo_body as_echo'

-fi

-

-# The user is always right.

-if test "${PATH_SEPARATOR+set}" != set; then

- PATH_SEPARATOR=:

- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {

- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||

- PATH_SEPARATOR=';'

- }

-fi

-

-

-# IFS

-# We need space, tab and new line, in precisely that order. Quoting is

-# there to prevent editors from complaining about space-tab.

-# (If _AS_PATH_WALK were called with IFS unset, it would disable word

-# splitting by setting IFS to empty value.)

-IFS=" "" $as_nl"

-

-# Find who we are. Look in the path if we contain no directory separator.

-as_myself=

-case $0 in #((

- *[\\/]* ) as_myself=$0 ;;

- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR

-for as_dir in $PATH

-do

- IFS=$as_save_IFS

- test -z "$as_dir" && as_dir=.

- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break

- done

-IFS=$as_save_IFS

-

- ;;

-esac

-# We did not find ourselves, most probably we were run as `sh COMMAND'

-# in which case we are not to be found in the path.

-if test "x$as_myself" = x; then

- as_myself=$0

-fi

-if test ! -f "$as_myself"; then

- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2

- exit 1

-fi

-

-# Unset variables that we do not need and which cause bugs (e.g. in

-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"

-# suppresses any "Segmentation fault" message there. '((' could

-# trigger a bug in pdksh 5.2.14.

-for as_var in BASH_ENV ENV MAIL MAILPATH

-do eval test x\${$as_var+set} = xset \

- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :

-done

-PS1='$ '

-PS2='> '

-PS4='+ '

-

-# NLS nuisances.

-LC_ALL=C

-export LC_ALL

-LANGUAGE=C

-export LANGUAGE

-

-# CDPATH.

-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

-

-

-# as_fn_error STATUS ERROR [LINENO LOG_FD]

-# ----------------------------------------

-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are

-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the

-# script with STATUS, using 1 if that was 0.

-as_fn_error ()

-{

- as_status=$1; test $as_status -eq 0 && as_status=1

- if test "$4"; then

- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack

- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4

- fi

- $as_echo "$as_me: error: $2" >&2

- as_fn_exit $as_status

-} # as_fn_error

-

-

-# as_fn_set_status STATUS

-# -----------------------

-# Set $? to STATUS, without forking.

-as_fn_set_status ()

-{

- return $1

-} # as_fn_set_status

-

-# as_fn_exit STATUS

-# -----------------

-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.

-as_fn_exit ()

-{

- set +e

- as_fn_set_status $1

- exit $1

-} # as_fn_exit

-

-# as_fn_unset VAR

-# ---------------

-# Portably unset VAR.

-as_fn_unset ()

-{

- { eval $1=; unset $1;}

-}

-as_unset=as_fn_unset

-# as_fn_append VAR VALUE

-# ----------------------

-# Append the text in VALUE to the end of the definition contained in VAR. Take

-# advantage of any shell optimizations that allow amortized linear growth over

-# repeated appends, instead of the typical quadratic growth present in naive

-# implementations.

-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :

- eval 'as_fn_append ()

- {

- eval $1+=\$2

- }'

-else

- as_fn_append ()

- {

- eval $1=\$$1\$2

- }

-fi # as_fn_append

-

-# as_fn_arith ARG...

-# ------------------

-# Perform arithmetic evaluation on the ARGs, and store the result in the

-# global $as_val. Take advantage of shells that can avoid forks. The arguments

-# must be portable across $(()) and expr.

-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :

- eval 'as_fn_arith ()

- {

- as_val=$(( $* ))

- }'

-else

- as_fn_arith ()

- {

- as_val=`expr "$@" || test $? -eq 1`

- }

-fi # as_fn_arith

-

-

-if expr a : '\(a\)' >/dev/null 2>&1 &&

- test "X`expr 00001 : '.*\(...\)'`" = X001; then

- as_expr=expr

-else

- as_expr=false

-fi

-

-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then

- as_basename=basename

-else

- as_basename=false

-fi

-

-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then

- as_dirname=dirname

-else

- as_dirname=false

-fi

-

-as_me=`$as_basename -- "$0" ||

-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \

- X"$0" : 'X\(//\)$' \| \

- X"$0" : 'X\(/\)' \| . 2>/dev/null ||

-$as_echo X/"$0" |

- sed '/^.*\/\([^/][^/]*\)\/*$/{

- s//\1/

- q

- }

- /^X\/\(\/\/\)$/{

- s//\1/

- q

- }

- /^X\/\(\/\).*/{

- s//\1/

- q

- }

- s/.*/./; q'`

-

-# Avoid depending upon Character Ranges.

-as_cr_letters='abcdefghijklmnopqrstuvwxyz'

-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'

-as_cr_Letters=$as_cr_letters$as_cr_LETTERS

-as_cr_digits='0123456789'

-as_cr_alnum=$as_cr_Letters$as_cr_digits

-

-ECHO_C= ECHO_N= ECHO_T=

-case `echo -n x` in #(((((

--n*)

- case `echo 'xy\c'` in

- *c*) ECHO_T=' ';; # ECHO_T is single tab character.

- xy) ECHO_C='\c';;

- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null

- ECHO_T=' ';;

- esac;;

-*)

- ECHO_N='-n';;

-esac

-

-rm -f conf$$ conf$$.exe conf$$.file

-if test -d conf$$.dir; then

- rm -f conf$$.dir/conf$$.file

-else

- rm -f conf$$.dir

- mkdir conf$$.dir 2>/dev/null

-fi

-if (echo >conf$$.file) 2>/dev/null; then

- if ln -s conf$$.file conf$$ 2>/dev/null; then

- as_ln_s='ln -s'

- # ... but there are two gotchas:

- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.

- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.

- # In both cases, we have to default to `cp -p'.

- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||

- as_ln_s='cp -p'

- elif ln conf$$.file conf$$ 2>/dev/null; then

- as_ln_s=ln

- else

- as_ln_s='cp -p'

- fi

-else

- as_ln_s='cp -p'

-fi

-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file

-rmdir conf$$.dir 2>/dev/null

-

-

-# as_fn_mkdir_p

-# -------------

-# Create "$as_dir" as a directory, including parents if necessary.

-as_fn_mkdir_p ()

-{

-

- case $as_dir in #(

- -*) as_dir=./$as_dir;;

- esac

- test -d "$as_dir" || eval $as_mkdir_p || {

- as_dirs=

- while :; do

- case $as_dir in #(

- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(

- *) as_qdir=$as_dir;;

- esac

- as_dirs="'$as_qdir' $as_dirs"

- as_dir=`$as_dirname -- "$as_dir" ||

-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \

- X"$as_dir" : 'X\(//\)[^/]' \| \

- X"$as_dir" : 'X\(//\)$' \| \

- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||

-$as_echo X"$as_dir" |

- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{

- s//\1/

- q

- }

- /^X\(\/\/\)[^/].*/{

- s//\1/

- q

- }

- /^X\(\/\/\)$/{

- s//\1/

- q

- }

- /^X\(\/\).*/{

- s//\1/

- q

- }

- s/.*/./; q'`

- test -d "$as_dir" && break

- done

- test -z "$as_dirs" || eval "mkdir $as_dirs"

- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"

-

-

-} # as_fn_mkdir_p

-if mkdir -p . 2>/dev/null; then

- as_mkdir_p='mkdir -p "$as_dir"'

-else

- test -d ./-p && rmdir ./-p

- as_mkdir_p=false

-fi

-

-if test -x / >/dev/null 2>&1; then

- as_test_x='test -x'

-else

- if ls -dL / >/dev/null 2>&1; then

- as_ls_L_option=L

- else

- as_ls_L_option=

- fi

- as_test_x='

- eval sh -c '\''

- if test -d "$1"; then

- test -d "$1/.";

- else

- case $1 in #(

- -*)set "./$1";;

- esac;

- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((

- ???[sx]*):;;*)false;;esac;fi

- '\'' sh

- '

-fi

-as_executable_p=$as_test_x

-

-# Sed expression to map a string onto a valid CPP name.

-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"

-

-# Sed expression to map a string onto a valid variable name.

-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"

-

-

-exec 6>&1

-## ----------------------------------- ##

-## Main body of $CONFIG_STATUS script. ##

-## ----------------------------------- ##

-_ASEOF

-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1

-

-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1

-# Save the log message, to keep $0 and so on meaningful, and to

-# report actual input values of CONFIG_FILES etc. instead of their

-# values after options handling.

-ac_log="

-This file was extended by mate-common $as_me 2011.10.29, which was

-generated by GNU Autoconf 2.68. Invocation command line was

-

- CONFIG_FILES = $CONFIG_FILES

- CONFIG_HEADERS = $CONFIG_HEADERS

- CONFIG_LINKS = $CONFIG_LINKS

- CONFIG_COMMANDS = $CONFIG_COMMANDS

- $ $0 $@

-

-on `(hostname || uname -n) 2>/dev/null | sed 1q`

-"

-

-_ACEOF

-

-case $ac_config_files in *"

-"*) set x $ac_config_files; shift; ac_config_files=$*;;

-esac

-

-

-

-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1

-# Files that config.status was made for.

-config_files="$ac_config_files"

-

-_ACEOF

-

-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1

-ac_cs_usage="\

-\`$as_me' instantiates files and other configuration actions

-from templates according to the current configuration. Unless the files

-and actions are specified as TAGs, all are instantiated by default.

-

-Usage: $0 [OPTION]... [TAG]...

-

- -h, --help print this help, then exit

- -V, --version print version number and configuration settings, then exit

- --config print configuration, then exit

- -q, --quiet, --silent

- do not print progress messages

- -d, --debug don't remove temporary files

- --recheck update $as_me by reconfiguring in the same conditions

- --file=FILE[:TEMPLATE]

- instantiate the configuration file FILE

-

-Configuration files:

-$config_files

-

-Report bugs to <https://github.com/perberos/mate-desktop-environment>."

-

-_ACEOF

-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1

-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"

-ac_cs_version="\\

-mate-common config.status 2011.10.29

-configured by $0, generated by GNU Autoconf 2.68,

- with options \\"\$ac_cs_config\\"

-

-Copyright (C) 2010 Free Software Foundation, Inc.

-This config.status script is free software; the Free Software Foundation

-gives unlimited permission to copy, distribute and modify it."

-

-ac_pwd='$ac_pwd'

-srcdir='$srcdir'

-INSTALL='$INSTALL'

-MKDIR_P='$MKDIR_P'

-AWK='$AWK'

-test -n "\$AWK" || AWK=awk

-_ACEOF

-

-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1

-# The default lists apply if the user does not specify any file.

-ac_need_defaults=:

-while test $# != 0

-do

- case $1 in

- --*=?*)

- ac_option=`expr "X$1" : 'X\([^=]*\)='`

- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`

- ac_shift=:

- ;;

- --*=)

- ac_option=`expr "X$1" : 'X\([^=]*\)='`

- ac_optarg=

- ac_shift=:

- ;;

- *)

- ac_option=$1

- ac_optarg=$2

- ac_shift=shift

- ;;

- esac

-

- case $ac_option in

- # Handling of the options.

- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)

- ac_cs_recheck=: ;;

- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )

- $as_echo "$ac_cs_version"; exit ;;

- --config | --confi | --conf | --con | --co | --c )

- $as_echo "$ac_cs_config"; exit ;;

- --debug | --debu | --deb | --de | --d | -d )

- debug=: ;;

- --file | --fil | --fi | --f )

- $ac_shift

- case $ac_optarg in

- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;

- '') as_fn_error $? "missing file argument" ;;

- esac

- as_fn_append CONFIG_FILES " '$ac_optarg'"

- ac_need_defaults=false;;

- --he | --h | --help | --hel | -h )

- $as_echo "$ac_cs_usage"; exit ;;

- -q | -quiet | --quiet | --quie | --qui | --qu | --q \

- | -silent | --silent | --silen | --sile | --sil | --si | --s)

- ac_cs_silent=: ;;

-

- # This is an error.

- -*) as_fn_error $? "unrecognized option: \`$1'

-Try \`$0 --help' for more information." ;;

-

- *) as_fn_append ac_config_targets " $1"

- ac_need_defaults=false ;;

-

- esac

- shift

-done

-

-ac_configure_extra_args=

-

-if $ac_cs_silent; then

- exec 6>/dev/null

- ac_configure_extra_args="$ac_configure_extra_args --silent"

-fi

-

-_ACEOF

-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1

-if \$ac_cs_recheck; then

- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion

- shift

- \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6

- CONFIG_SHELL='$SHELL'

- export CONFIG_SHELL

- exec "\$@"

-fi

-

-_ACEOF

-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1

-exec 5>>config.log

-{

- echo

- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX

-## Running $as_me. ##

-_ASBOX

- $as_echo "$ac_log"

-} >&5

-

-_ACEOF

-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1

-_ACEOF

-

-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1

-

-# Handling of arguments.

-for ac_config_target in $ac_config_targets

-do

- case $ac_config_target in

- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;

- "mate-common.spec") CONFIG_FILES="$CONFIG_FILES mate-common.spec" ;;

- "macros2/Makefile") CONFIG_FILES="$CONFIG_FILES macros2/Makefile" ;;

- "doc-build/Makefile") CONFIG_FILES="$CONFIG_FILES doc-build/Makefile" ;;

- "doc-build/mate-doc-common") CONFIG_FILES="$CONFIG_FILES doc-build/mate-doc-common" ;;

-

- *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;

- esac

-done

-

-

-# If the user did not use the arguments to specify the items to instantiate,

-# then the envvar interface is used. Set only those that are not.

-# We use the long form for the default assignment because of an extremely

-# bizarre bug on SunOS 4.1.3.

-if $ac_need_defaults; then

- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files

-fi

-

-# Have a temporary directory for convenience. Make it in the build tree

-# simply because there is no reason against having it here, and in addition,

-# creating and moving files from /tmp can sometimes cause problems.

-# Hook for its removal unless debugging.

-# Note that there is a small window in which the directory will not be cleaned:

-# after its creation but before its name has been assigned to `$tmp'.

-$debug ||

-{

- tmp= ac_tmp=

- trap 'exit_status=$?

- : "${ac_tmp:=$tmp}"

- { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status

-' 0

- trap 'as_fn_exit 1' 1 2 13 15

-}

-# Create a (secure) tmp directory for tmp files.

-

-{

- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&

- test -d "$tmp"

-} ||

-{

- tmp=./conf$$-$RANDOM

- (umask 077 && mkdir "$tmp")

-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5

-ac_tmp=$tmp

-

-# Set up the scripts for CONFIG_FILES section.

-# No need to generate them if there are no CONFIG_FILES.

-# This happens for instance with `./config.status config.h'.

-if test -n "$CONFIG_FILES"; then

-

-

-ac_cr=`echo X | tr X '\015'`

-# On cygwin, bash can eat \r inside `` if the user requested igncr.

-# But we know of no other shell where ac_cr would be empty at this

-# point, so we can use a bashism as a fallback.

-if test "x$ac_cr" = x; then

- eval ac_cr=\$\'\\r\'

-fi

-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`

-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then

- ac_cs_awk_cr='\\r'

-else

- ac_cs_awk_cr=$ac_cr

-fi

-

-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&

-_ACEOF

-

-

-{

- echo "cat >conf$$subs.awk <<_ACEOF" &&

- echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&

- echo "_ACEOF"

-} >conf$$subs.sh ||

- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5

-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`

-ac_delim='%!_!# '

-for ac_last_try in false false false false false :; do

- . ./conf$$subs.sh ||

- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5

-

- ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`

- if test $ac_delim_n = $ac_delim_num; then

- break

- elif $ac_last_try; then

- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5

- else

- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "

- fi

-done

-rm -f conf$$subs.sh

-

-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1

-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&

-_ACEOF

-sed -n '

-h

-s/^/S["/; s/!.*/"]=/

-p

-g

-s/^[^!]*!//

-:repl

-t repl

-s/'"$ac_delim"'$//

-t delim

-:nl

-h

-s/\(.\{148\}\)..*/\1/

-t more1

-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/

-p

-n

-b repl

-:more1

-s/["\\]/\\&/g; s/^/"/; s/$/"\\/

-p

-g

-s/.\{148\}//

-t nl

-:delim

-h

-s/\(.\{148\}\)..*/\1/

-t more2

-s/["\\]/\\&/g; s/^/"/; s/$/"/

-p

-b

-:more2

-s/["\\]/\\&/g; s/^/"/; s/$/"\\/

-p

-g

-s/.\{148\}//

-t delim

-' <conf$$subs.awk | sed '

-/^[^""]/{

- N

- s/\n//

-}

-' >>$CONFIG_STATUS || ac_write_fail=1

-rm -f conf$$subs.awk

-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1

-_ACAWK

-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&

- for (key in S) S_is_set[key] = 1

- FS = ""

-

-}

-{

- line = $ 0

- nfields = split(line, field, "@")

- substed = 0

- len = length(field[1])

- for (i = 2; i < nfields; i++) {

- key = field[i]

- keylen = length(key)

- if (S_is_set[key]) {

- value = S[key]

- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)

- len += length(value) + length(field[++i])

- substed = 1

- } else

- len += 1 + keylen

- }

-

- print line

-}

-

-_ACAWK

-_ACEOF

-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1

-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then

- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"

-else

- cat

-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \

- || as_fn_error $? "could not setup config files machinery" "$LINENO" 5

-_ACEOF

-

-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),

-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and

-# trailing colons and then remove the whole line if VPATH becomes empty

-# (actually we leave an empty line to preserve line numbers).

-if test "x$srcdir" = x.; then

- ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{

-h

-s///

-s/^/:/

-s/[ ]*$/:/

-s/:\$(srcdir):/:/g

-s/:\${srcdir}:/:/g

-s/:@srcdir@:/:/g

-s/^:*//

-s/:*$//

-x

-s/\(=[ ]*\).*/\1/

-G

-s/\n//

-s/^[^=]*=[ ]*$//

-}'

-fi

-

-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1

-fi # test -n "$CONFIG_FILES"

-

-

-eval set X " :F $CONFIG_FILES "

-shift

-for ac_tag

-do

- case $ac_tag in

- :[FHLC]) ac_mode=$ac_tag; continue;;

- esac

- case $ac_mode$ac_tag in

- :[FHL]*:*);;

- :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;

- :[FH]-) ac_tag=-:-;;

- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;

- esac

- ac_save_IFS=$IFS

- IFS=:

- set x $ac_tag

- IFS=$ac_save_IFS

- shift

- ac_file=$1

- shift

-

- case $ac_mode in

- :L) ac_source=$1;;

- :[FH])

- ac_file_inputs=

- for ac_f

- do

- case $ac_f in

- -) ac_f="$ac_tmp/stdin";;

- *) # Look for the file first in the build tree, then in the source tree

- # (if the path is not absolute). The absolute path cannot be DOS-style,

- # because $ac_f cannot contain `:'.

- test -f "$ac_f" ||

- case $ac_f in

- [\\/$]*) false;;

- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;

- esac ||

- as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;

- esac

- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac

- as_fn_append ac_file_inputs " '$ac_f'"

- done

-

- # Let's still pretend it is `configure' which instantiates (i.e., don't

- # use $as_me), people would be surprised to read:

- # /* config.h. Generated by config.status. */

- configure_input='Generated from '`

- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'

- `' by configure.'

- if test x"$ac_file" != x-; then

- configure_input="$ac_file. $configure_input"

- { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5

-$as_echo "$as_me: creating $ac_file" >&6;}

- fi

- # Neutralize special characters interpreted by sed in replacement strings.

- case $configure_input in #(

- *\&* | *\|* | *\\* )

- ac_sed_conf_input=`$as_echo "$configure_input" |

- sed 's/[\\\\&|]/\\\\&/g'`;; #(

- *) ac_sed_conf_input=$configure_input;;

- esac

-

- case $ac_tag in

- *:-:* | *:-) cat >"$ac_tmp/stdin" \

- || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;

- esac

- ;;

- esac

-

- ac_dir=`$as_dirname -- "$ac_file" ||

-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \

- X"$ac_file" : 'X\(//\)[^/]' \| \

- X"$ac_file" : 'X\(//\)$' \| \

- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||

-$as_echo X"$ac_file" |

- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{

- s//\1/

- q

- }

- /^X\(\/\/\)[^/].*/{

- s//\1/

- q

- }

- /^X\(\/\/\)$/{

- s//\1/

- q

- }

- /^X\(\/\).*/{

- s//\1/

- q

- }

- s/.*/./; q'`

- as_dir="$ac_dir"; as_fn_mkdir_p

- ac_builddir=.

-

-case "$ac_dir" in

-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;

-*)

- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`

- # A ".." for each directory in $ac_dir_suffix.

- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`

- case $ac_top_builddir_sub in

- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;

- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;

- esac ;;

-esac

-ac_abs_top_builddir=$ac_pwd

-ac_abs_builddir=$ac_pwd$ac_dir_suffix

-# for backward compatibility:

-ac_top_builddir=$ac_top_build_prefix

-

-case $srcdir in

- .) # We are building in place.

- ac_srcdir=.

- ac_top_srcdir=$ac_top_builddir_sub

- ac_abs_top_srcdir=$ac_pwd ;;

- [\\/]* | ?:[\\/]* ) # Absolute name.

- ac_srcdir=$srcdir$ac_dir_suffix;

- ac_top_srcdir=$srcdir

- ac_abs_top_srcdir=$srcdir ;;

- *) # Relative name.

- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix

- ac_top_srcdir=$ac_top_build_prefix$srcdir

- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;

-esac

-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix

-

-

- case $ac_mode in

- :F)

- #

- # CONFIG_FILE

- #

-

- case $INSTALL in

- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;

- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;

- esac

- ac_MKDIR_P=$MKDIR_P

- case $MKDIR_P in

- [\\/$]* | ?:[\\/]* ) ;;

- */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;

- esac

-_ACEOF

-

-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1

-# If the template does not know about datarootdir, expand it.

-# FIXME: This hack should be removed a few years after 2.60.

-ac_datarootdir_hack=; ac_datarootdir_seen=

-ac_sed_dataroot='

-/datarootdir/ {

- p

- q

-}

-/@datadir@/p

-/@docdir@/p

-/@infodir@/p

-/@localedir@/p

-/@mandir@/p'

-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in

-*datarootdir*) ac_datarootdir_seen=yes;;

-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)

- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5

-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}

-_ACEOF

-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1

- ac_datarootdir_hack='

- s&@datadir@&$datadir&g

- s&@docdir@&$docdir&g

- s&@infodir@&$infodir&g

- s&@localedir@&$localedir&g

- s&@mandir@&$mandir&g

- s&\\\${datarootdir}&$datarootdir&g' ;;

-esac

-_ACEOF

-

-# Neutralize VPATH when `$srcdir' = `.'.

-# Shell code in configure.ac might set extrasub.

-# FIXME: do we really want to maintain this feature?

-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1

-ac_sed_extra="$ac_vpsub

-$extrasub

-_ACEOF

-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1

-:t

-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b

-s|@configure_input@|$ac_sed_conf_input|;t t

-s&@top_builddir@&$ac_top_builddir_sub&;t t

-s&@top_build_prefix@&$ac_top_build_prefix&;t t

-s&@srcdir@&$ac_srcdir&;t t

-s&@abs_srcdir@&$ac_abs_srcdir&;t t

-s&@top_srcdir@&$ac_top_srcdir&;t t

-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t

-s&@builddir@&$ac_builddir&;t t

-s&@abs_builddir@&$ac_abs_builddir&;t t

-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t

-s&@INSTALL@&$ac_INSTALL&;t t

-s&@MKDIR_P@&$ac_MKDIR_P&;t t

-$ac_datarootdir_hack

-"

-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \

- >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5

-

-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&

- { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&

- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \

- "$ac_tmp/out"`; test -z "$ac_out"; } &&

- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'

-which seems to be undefined. Please make sure it is defined" >&5

-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'

-which seems to be undefined. Please make sure it is defined" >&2;}

-

- rm -f "$ac_tmp/stdin"

- case $ac_file in

- -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;

- *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;

- esac \

- || as_fn_error $? "could not create $ac_file" "$LINENO" 5

- ;;

-

-

-

- esac

-

-done # for ac_tag

-

-

-as_fn_exit 0

-_ACEOF

-ac_clean_files=$ac_clean_files_save

-

-test $ac_write_fail = 0 ||

- as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5

-

-

-# configure is writing to config.log, and then calls config.status.

-# config.status does its own redirection, appending to config.log.

-# Unfortunately, on DOS this fails, as config.log is still kept open

-# by configure, so config.status won't be able to write to it; its

-# output is simply discarded. So we exec the FD to /dev/null,

-# effectively closing config.log, so it can be properly (re)opened and

-# appended to by config.status. When coming back to configure, we

-# need to make the FD available again.

-if test "$no_create" != yes; then

- ac_cs_success=:

- ac_config_status_args=

- test "$silent" = yes &&

- ac_config_status_args="$ac_config_status_args --quiet"

- exec 5>/dev/null

- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false

- exec 5>>config.log

- # Use ||, not &&, to avoid exiting from the if with $? = 1, which

- # would make configure fail if this is the last instruction.

- $ac_cs_success || as_fn_exit 1

-fi

-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then

- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5

-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}

-fi

-

-# Makefile.in generated by automake 1.11.1 from Makefile.am.

-# @configure_input@

-

-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,

-# Inc.

-# This Makefile.in is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# This program is distributed in the hope that it will be useful,

-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

-# PARTICULAR PURPOSE.

-

-@SET_MAKE@

-

-

-VPATH = @srcdir@

-pkgincludedir = $(includedir)/@PACKAGE@

-pkglibdir = $(libdir)/@PACKAGE@

-pkglibexecdir = $(libexecdir)/@PACKAGE@

-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

-install_sh_DATA = $(install_sh) -c -m 644

-install_sh_PROGRAM = $(install_sh) -c

-install_sh_SCRIPT = $(install_sh) -c

-INSTALL_HEADER = $(INSTALL_DATA)

-transform = $(program_transform_name)

-NORMAL_INSTALL = :

-PRE_INSTALL = :

-POST_INSTALL = :

-NORMAL_UNINSTALL = :

-PRE_UNINSTALL = :

-POST_UNINSTALL = :

-subdir = doc-build

-DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in \

- $(srcdir)/mate-doc-common.in

-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

-am__aclocal_m4_deps = $(top_srcdir)/configure.in

-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

- $(ACLOCAL_M4)

-mkinstalldirs = $(install_sh) -d

-CONFIG_CLEAN_FILES = mate-doc-common

-CONFIG_CLEAN_VPATH_FILES =

-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;

-am__vpath_adj = case $$p in \

- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \

- *) f=$$p;; \

- esac;

-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;

-am__install_max = 40

-am__nobase_strip_setup = \

- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`

-am__nobase_strip = \

- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"

-am__nobase_list = $(am__nobase_strip_setup); \

- for p in $$list; do echo "$$p $$p"; done | \

- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \

- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \

- if (++n[$$2] == $(am__install_max)) \

- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \

- END { for (dir in files) print dir, files[dir] }'

-am__base_list = \

- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \

- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'

-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgdatadir)"

-SCRIPTS = $(bin_SCRIPTS)

-AM_V_GEN = $(am__v_GEN_$(V))

-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))

-am__v_GEN_0 = @echo " GEN " $@;

-AM_V_at = $(am__v_at_$(V))

-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))

-am__v_at_0 = @

-SOURCES =

-DIST_SOURCES =

-DATA = $(pkgdata_DATA)

-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

-pkgdatadir = $(datadir)/mate-common/data

-ACLOCAL = @ACLOCAL@

-AMTAR = @AMTAR@

-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@

-AUTOCONF = @AUTOCONF@

-AUTOHEADER = @AUTOHEADER@

-AUTOMAKE = @AUTOMAKE@

-AWK = @AWK@

-CYGPATH_W = @CYGPATH_W@

-DEFS = @DEFS@

-ECHO_C = @ECHO_C@

-ECHO_N = @ECHO_N@

-ECHO_T = @ECHO_T@

-INSTALL = @INSTALL@

-INSTALL_DATA = @INSTALL_DATA@

-INSTALL_PROGRAM = @INSTALL_PROGRAM@

-INSTALL_SCRIPT = @INSTALL_SCRIPT@

-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

-LIBOBJS = @LIBOBJS@

-LIBS = @LIBS@

-LTLIBOBJS = @LTLIBOBJS@

-MAINT = @MAINT@

-MAKEINFO = @MAKEINFO@

-MKDIR_P = @MKDIR_P@

-PACKAGE = @PACKAGE@

-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

-PACKAGE_NAME = @PACKAGE_NAME@

-PACKAGE_STRING = @PACKAGE_STRING@

-PACKAGE_TARNAME = @PACKAGE_TARNAME@

-PACKAGE_URL = @PACKAGE_URL@

-PACKAGE_VERSION = @PACKAGE_VERSION@

-PATH_SEPARATOR = @PATH_SEPARATOR@

-SET_MAKE = @SET_MAKE@

-SHELL = @SHELL@

-STRIP = @STRIP@

-VERSION = @VERSION@

-abs_builddir = @abs_builddir@

-abs_srcdir = @abs_srcdir@

-abs_top_builddir = @abs_top_builddir@

-abs_top_srcdir = @abs_top_srcdir@

-am__leading_dot = @am__leading_dot@

-am__tar = @am__tar@

-am__untar = @am__untar@

-bindir = @bindir@

-build_alias = @build_alias@

-builddir = @builddir@

-datadir = @datadir@

-datarootdir = @datarootdir@

-docdir = @docdir@

-dvidir = @dvidir@

-exec_prefix = @exec_prefix@

-host_alias = @host_alias@

-htmldir = @htmldir@

-includedir = @includedir@

-infodir = @infodir@

-install_sh = @install_sh@

-libdir = @libdir@

-libexecdir = @libexecdir@

-localedir = @localedir@

-localstatedir = @localstatedir@

-mandir = @mandir@

-mkdir_p = @mkdir_p@

-oldincludedir = @oldincludedir@

-pdfdir = @pdfdir@

-prefix = @prefix@

-program_transform_name = @program_transform_name@

-psdir = @psdir@

-sbindir = @sbindir@

-sharedstatedir = @sharedstatedir@

-srcdir = @srcdir@

-sysconfdir = @sysconfdir@

-target_alias = @target_alias@

-top_build_prefix = @top_build_prefix@

-top_builddir = @top_builddir@

-top_srcdir = @top_srcdir@

-bin_SCRIPTS = mate-doc-common

-pkgdata_DATA = \

- omf.make \

- xmldocs.make

-

-EXTRA_DIST = \

- omf.make \

- xmldocs.make \

- mate-doc-common.in \

- README

-

-all: all-am

-

-.SUFFIXES:

-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)

- @for dep in $?; do \

- case '$(am__configure_deps)' in \

- *$$dep*) \

- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \

- && { if test -f $@; then exit 0; else break; fi; }; \

- exit 1;; \

- esac; \

- done; \

- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc-build/Makefile'; \

- $(am__cd) $(top_srcdir) && \

- $(AUTOMAKE) --foreign doc-build/Makefile

-.PRECIOUS: Makefile

-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

- @case '$?' in \

- *config.status*) \

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \

- *) \

- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \

- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \

- esac;

-

-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

-

-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

-$(am__aclocal_m4_deps):

-mate-doc-common: $(top_builddir)/config.status $(srcdir)/mate-doc-common.in

- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

-install-binSCRIPTS: $(bin_SCRIPTS)

- @$(NORMAL_INSTALL)

- test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"

- @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \

- for p in $$list; do \

- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \

- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \

- done | \

- sed -e 'p;s,.*/,,;n' \

- -e 'h;s|.*|.|' \

- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \

- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \

- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \

- if ($$2 == $$4) { files[d] = files[d] " " $$1; \

- if (++n[d] == $(am__install_max)) { \

- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \

- else { print "f", d "/" $$4, $$1 } } \

- END { for (d in files) print "f", d, files[d] }' | \

- while read type dir files; do \

- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \

- test -z "$$files" || { \

- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \

- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \

- } \

- ; done

-

-uninstall-binSCRIPTS:

- @$(NORMAL_UNINSTALL)

- @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \

- files=`for p in $$list; do echo "$$p"; done | \

- sed -e 's,.*/,,;$(transform)'`; \

- test -n "$$list" || exit 0; \

- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \

- cd "$(DESTDIR)$(bindir)" && rm -f $$files

-install-pkgdataDATA: $(pkgdata_DATA)

- @$(NORMAL_INSTALL)

- test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)"

- @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \

- for p in $$list; do \

- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \

- echo "$$d$$p"; \

- done | $(am__base_list) | \

- while read files; do \

- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \

- $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \

- done

-

-uninstall-pkgdataDATA:

- @$(NORMAL_UNINSTALL)

- @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \

- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \

- test -n "$$files" || exit 0; \

- echo " ( cd '$(DESTDIR)$(pkgdatadir)' && rm -f" $$files ")"; \

- cd "$(DESTDIR)$(pkgdatadir)" && rm -f $$files

-tags: TAGS

-TAGS:

-

-ctags: CTAGS

-CTAGS:

-

-

-distdir: $(DISTFILES)

- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

- list='$(DISTFILES)'; \

- dist_files=`for file in $$list; do echo $$file; done | \

- sed -e "s|^$$srcdirstrip/||;t" \

- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

- case $$dist_files in \

- */*) $(MKDIR_P) `echo "$$dist_files" | \

- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

- sort -u` ;; \

- esac; \

- for file in $$dist_files; do \

- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

- if test -d $$d/$$file; then \

- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

- if test -d "$(distdir)/$$file"; then \

- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

- fi; \

- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

- fi; \

- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

- else \

- test -f "$(distdir)/$$file" \

- || cp -p $$d/$$file "$(distdir)/$$file" \

- || exit 1; \

- fi; \

- done

-check-am: all-am

-check: check-am

-all-am: Makefile $(SCRIPTS) $(DATA)

-installdirs:

- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgdatadir)"; do \

- test -z "$$dir" || $(MKDIR_P) "$$dir"; \

- done

-install: install-am

-install-exec: install-exec-am

-install-data: install-data-am

-uninstall: uninstall-am

-

-install-am: all-am

- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

-

-installcheck: installcheck-am

-install-strip:

- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

- `test -z '$(STRIP)' || \

- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install

-mostlyclean-generic:

-

-clean-generic:

-

-distclean-generic:

- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

-

-maintainer-clean-generic:

- @echo "This command is intended for maintainers to use"

- @echo "it deletes files that may require special tools to rebuild."

-clean: clean-am

-

-clean-am: clean-generic mostlyclean-am

-

-distclean: distclean-am

- -rm -f Makefile

-distclean-am: clean-am distclean-generic

-

-dvi: dvi-am

-

-dvi-am:

-

-html: html-am

-

-html-am:

-

-info: info-am

-

-info-am:

-

-install-data-am: install-pkgdataDATA

-

-install-dvi: install-dvi-am

-

-install-dvi-am:

-

-install-exec-am: install-binSCRIPTS

-

-install-html: install-html-am

-

-install-html-am:

-

-install-info: install-info-am

-

-install-info-am:

-

-install-man:

-

-install-pdf: install-pdf-am

-

-install-pdf-am:

-

-install-ps: install-ps-am

-

-install-ps-am:

-

-installcheck-am:

-

-maintainer-clean: maintainer-clean-am

- -rm -f Makefile

-maintainer-clean-am: distclean-am maintainer-clean-generic

-

-mostlyclean: mostlyclean-am

-

-mostlyclean-am: mostlyclean-generic

-

-pdf: pdf-am

-

-pdf-am:

-

-ps: ps-am

-

-ps-am:

-

-uninstall-am: uninstall-binSCRIPTS uninstall-pkgdataDATA

-

-.MAKE: install-am install-strip

-

-.PHONY: all all-am check check-am clean clean-generic distclean \

- distclean-generic distdir dvi dvi-am html html-am info info-am \

- install install-am install-binSCRIPTS install-data \

- install-data-am install-dvi install-dvi-am install-exec \

- install-exec-am install-html install-html-am install-info \

- install-info-am install-man install-pdf install-pdf-am \

- install-pkgdataDATA install-ps install-ps-am install-strip \

- installcheck installcheck-am installdirs maintainer-clean \

- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \

- pdf-am ps ps-am uninstall uninstall-am uninstall-binSCRIPTS \

- uninstall-pkgdataDATA

-

-

-# Tell versions [3.59,3.63) of GNU make to not export all variables.

-# Otherwise a system limit (for SysV at least) may be exceeded.

-.NOEXPORT:

-#!/bin/sh

-# install - install a program, script, or datafile

-

-scriptversion=2009-04-28.21; # UTC

-

-# This originates from X11R5 (mit/util/scripts/install.sh), which was

-# later released in X11R6 (xc/config/util/install.sh) with the

-# following copyright and license.

-#

-# Copyright (C) 1994 X Consortium

-#

-# Permission is hereby granted, free of charge, to any person obtaining a copy

-# of this software and associated documentation files (the "Software"), to

-# deal in the Software without restriction, including without limitation the

-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or

-# sell copies of the Software, and to permit persons to whom the Software is

-# furnished to do so, subject to the following conditions:

-#

-# The above copyright notice and this permission notice shall be included in

-# all copies or substantial portions of the Software.

-#

-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE

-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN

-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-

-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

-#

-# Except as contained in this notice, the name of the X Consortium shall not

-# be used in advertising or otherwise to promote the sale, use or other deal-

-# ings in this Software without prior written authorization from the X Consor-

-# tium.

-#

-#

-# FSF changes to this file are in the public domain.

-#

-# Calling this script install-sh is preferred over install.sh, to prevent

-# `make' implicit rules from creating a file called install from it

-# when there is no Makefile.

-#

-# This script is compatible with the BSD install script, but was written

-# from scratch.

-

-nl='

-'

-IFS=" "" $nl"

-

-# set DOITPROG to echo to test this script

-

-# Don't use :- since 4.3BSD and earlier shells don't like it.

-doit=${DOITPROG-}

-if test -z "$doit"; then

- doit_exec=exec

-else

- doit_exec=$doit

-fi

-

-# Put in absolute file names if you don't have them in your path;

-# or use environment vars.

-

-chgrpprog=${CHGRPPROG-chgrp}

-chmodprog=${CHMODPROG-chmod}

-chownprog=${CHOWNPROG-chown}

-cmpprog=${CMPPROG-cmp}

-cpprog=${CPPROG-cp}

-mkdirprog=${MKDIRPROG-mkdir}

-mvprog=${MVPROG-mv}

-rmprog=${RMPROG-rm}

-stripprog=${STRIPPROG-strip}

-

-posix_glob='?'

-initialize_posix_glob='

- test "$posix_glob" != "?" || {

- if (set -f) 2>/dev/null; then

- posix_glob=

- else

- posix_glob=:

- fi

- }

-'

-

-posix_mkdir=

-

-# Desired mode of installed file.

-mode=0755

-

-chgrpcmd=

-chmodcmd=$chmodprog

-chowncmd=

-mvcmd=$mvprog

-rmcmd="$rmprog -f"

-stripcmd=

-

-src=

-dst=

-dir_arg=

-dst_arg=

-

-copy_on_change=false

-no_target_directory=

-

-usage="\

-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE

- or: $0 [OPTION]... SRCFILES... DIRECTORY

- or: $0 [OPTION]... -t DIRECTORY SRCFILES...

- or: $0 [OPTION]... -d DIRECTORIES...

-

-In the 1st form, copy SRCFILE to DSTFILE.

-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.

-In the 4th, create DIRECTORIES.

-

-Options:

- --help display this help and exit.

- --version display version info and exit.

-

- -c (ignored)

- -C install only if different (preserve the last data modification time)

- -d create directories instead of installing files.

- -g GROUP $chgrpprog installed files to GROUP.

- -m MODE $chmodprog installed files to MODE.

- -o USER $chownprog installed files to USER.

- -s $stripprog installed files.

- -t DIRECTORY install into DIRECTORY.

- -T report an error if DSTFILE is a directory.

-

-Environment variables override the default commands:

- CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG

- RMPROG STRIPPROG

-"

-

-while test $# -ne 0; do

- case $1 in

- -c) ;;

-

- -C) copy_on_change=true;;

-

- -d) dir_arg=true;;

-

- -g) chgrpcmd="$chgrpprog $2"

- shift;;

-

- --help) echo "$usage"; exit $?;;

-

- -m) mode=$2

- case $mode in

- *' '* | *' '* | *'

-'* | *'*'* | *'?'* | *'['*)

- echo "$0: invalid mode: $mode" >&2

- exit 1;;

- esac

- shift;;

-

- -o) chowncmd="$chownprog $2"

- shift;;

-

- -s) stripcmd=$stripprog;;

-

- -t) dst_arg=$2

- shift;;

-

- -T) no_target_directory=true;;

-

- --version) echo "$0 $scriptversion"; exit $?;;

-

- --) shift

- break;;

-

- -*) echo "$0: invalid option: $1" >&2

- exit 1;;

-

- *) break;;

- esac

- shift

-done

-

-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then

- # When -d is used, all remaining arguments are directories to create.

- # When -t is used, the destination is already specified.

- # Otherwise, the last argument is the destination. Remove it from $@.

- for arg

- do

- if test -n "$dst_arg"; then

- # $@ is not empty: it contains at least $arg.

- set fnord "$@" "$dst_arg"

- shift # fnord

- fi

- shift # arg

- dst_arg=$arg

- done

-fi

-

-if test $# -eq 0; then

- if test -z "$dir_arg"; then

- echo "$0: no input file specified." >&2

- exit 1

- fi

- # It's OK to call `install-sh -d' without argument.

- # This can happen when creating conditional directories.

- exit 0

-fi

-

-if test -z "$dir_arg"; then

- trap '(exit $?); exit' 1 2 13 15

-

- # Set umask so as not to create temps with too-generous modes.

- # However, 'strip' requires both read and write access to temps.

- case $mode in

- # Optimize common cases.

- *644) cp_umask=133;;

- *755) cp_umask=22;;

-

- *[0-7])

- if test -z "$stripcmd"; then

- u_plus_rw=

- else

- u_plus_rw='% 200'

- fi

- cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;

- *)

- if test -z "$stripcmd"; then

- u_plus_rw=

- else

- u_plus_rw=,u+rw

- fi

- cp_umask=$mode$u_plus_rw;;

- esac

-fi

-

-for src

-do

- # Protect names starting with `-'.

- case $src in

- -*) src=./$src;;

- esac

-

- if test -n "$dir_arg"; then

- dst=$src

- dstdir=$dst

- test -d "$dstdir"

- dstdir_status=$?

- else

-

- # Waiting for this to be detected by the "$cpprog $src $dsttmp" command

- # might cause directories to be created, which would be especially bad

- # if $src (and thus $dsttmp) contains '*'.

- if test ! -f "$src" && test ! -d "$src"; then

- echo "$0: $src does not exist." >&2

- exit 1

- fi

-

- if test -z "$dst_arg"; then

- echo "$0: no destination specified." >&2

- exit 1

- fi

-

- dst=$dst_arg

- # Protect names starting with `-'.

- case $dst in

- -*) dst=./$dst;;

- esac

-

- # If destination is a directory, append the input filename; won't work

- # if double slashes aren't ignored.

- if test -d "$dst"; then

- if test -n "$no_target_directory"; then

- echo "$0: $dst_arg: Is a directory" >&2

- exit 1

- fi

- dstdir=$dst

- dst=$dstdir/`basename "$src"`

- dstdir_status=0

- else

- # Prefer dirname, but fall back on a substitute if dirname fails.

- dstdir=`

- (dirname "$dst") 2>/dev/null ||

- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \

- X"$dst" : 'X\(//\)[^/]' \| \

- X"$dst" : 'X\(//\)$' \| \

- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||

- echo X"$dst" |

- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{

- s//\1/

- q

- }

- /^X\(\/\/\)[^/].*/{

- s//\1/

- q

- }

- /^X\(\/\/\)$/{

- s//\1/

- q

- }

- /^X\(\/\).*/{

- s//\1/

- q

- }

- s/.*/./; q'

- `

-

- test -d "$dstdir"

- dstdir_status=$?

- fi

- fi

-

- obsolete_mkdir_used=false

-

- if test $dstdir_status != 0; then

- case $posix_mkdir in

- '')

- # Create intermediate dirs using mode 755 as modified by the umask.

- # This is like FreeBSD 'install' as of 1997-10-28.

- umask=`umask`

- case $stripcmd.$umask in

- # Optimize common cases.

- *[2367][2367]) mkdir_umask=$umask;;

- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;

-

- *[0-7])

- mkdir_umask=`expr $umask + 22 \

- - $umask % 100 % 40 + $umask % 20 \

- - $umask % 10 % 4 + $umask % 2

- `;;

- *) mkdir_umask=$umask,go-w;;

- esac

-

- # With -d, create the new directory with the user-specified mode.

- # Otherwise, rely on $mkdir_umask.

- if test -n "$dir_arg"; then

- mkdir_mode=-m$mode

- else

- mkdir_mode=

- fi

-

- posix_mkdir=false

- case $umask in

- *[123567][0-7][0-7])

- # POSIX mkdir -p sets u+wx bits regardless of umask, which

- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.

- ;;

- *)

- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$

- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0

-

- if (umask $mkdir_umask &&

- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1

- then

- if test -z "$dir_arg" || {

- # Check for POSIX incompatibilities with -m.

- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or

- # other-writeable bit of parent directory when it shouldn't.

- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.

- ls_ld_tmpdir=`ls -ld "$tmpdir"`

- case $ls_ld_tmpdir in

- d????-?r-*) different_mode=700;;

- d????-?--*) different_mode=755;;

- *) false;;

- esac &&

- $mkdirprog -m$different_mode -p -- "$tmpdir" && {

- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`

- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"

- }

- }

- then posix_mkdir=:

- fi

- rmdir "$tmpdir/d" "$tmpdir"

- else

- # Remove any dirs left behind by ancient mkdir implementations.

- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null

- fi

- trap '' 0;;

- esac;;

- esac

-

- if

- $posix_mkdir && (

- umask $mkdir_umask &&

- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"

- )

- then :

- else

-

- # The umask is ridiculous, or mkdir does not conform to POSIX,

- # or it failed possibly due to a race condition. Create the

- # directory the slow way, step by step, checking for races as we go.

-

- case $dstdir in

- /*) prefix='/';;

- -*) prefix='./';;

- *) prefix='';;

- esac

-

- eval "$initialize_posix_glob"

-

- oIFS=$IFS

- IFS=/

- $posix_glob set -f

- set fnord $dstdir

- shift

- $posix_glob set +f

- IFS=$oIFS

-

- prefixes=

-

- for d

- do

- test -z "$d" && continue

-

- prefix=$prefix$d

- if test -d "$prefix"; then

- prefixes=

- else

- if $posix_mkdir; then

- (umask=$mkdir_umask &&

- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break

- # Don't fail if two instances are running concurrently.

- test -d "$prefix" || exit 1

- else

- case $prefix in

- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;

- *) qprefix=$prefix;;

- esac

- prefixes="$prefixes '$qprefix'"

- fi

- fi

- prefix=$prefix/

- done

-

- if test -n "$prefixes"; then

- # Don't fail if two instances are running concurrently.

- (umask $mkdir_umask &&

- eval "\$doit_exec \$mkdirprog $prefixes") ||

- test -d "$dstdir" || exit 1

- obsolete_mkdir_used=true

- fi

- fi

- fi

-

- if test -n "$dir_arg"; then

- { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&

- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&

- { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||

- test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1

- else

-

- # Make a couple of temp file names in the proper directory.

- dsttmp=$dstdir/_inst.$$_

- rmtmp=$dstdir/_rm.$$_

-

- # Trap to clean up those temp files at exit.

- trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0

-

- # Copy the file name to the temp name.

- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&

-

- # and set any options; do chmod last to preserve setuid bits.

- #

- # If any of these fail, we abort the whole thing. If we want to

- # ignore errors from any of these, just make sure not to ignore

- # errors from the above "$doit $cpprog $src $dsttmp" command.

- #

- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&

- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&

- { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&

- { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&

-

- # If -C, don't bother to copy if it wouldn't change the file.

- if $copy_on_change &&

- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&

- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&

-

- eval "$initialize_posix_glob" &&

- $posix_glob set -f &&

- set X $old && old=:$2:$4:$5:$6 &&

- set X $new && new=:$2:$4:$5:$6 &&

- $posix_glob set +f &&

-

- test "$old" = "$new" &&

- $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1

- then

- rm -f "$dsttmp"

- else

- # Rename the file to the real destination.

- $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||

-

- # The rename failed, perhaps because mv can't rename something else

- # to itself, or perhaps because mv is so ancient that it does not

- # support -f.

- {

- # Now remove or move aside any old file at destination location.

- # We try this two ways since rm can't unlink itself on some

- # systems and the destination file might be busy for other

- # reasons. In this case, the final cleanup might fail but the new

- # file should still install successfully.

- {

- test ! -f "$dst" ||

- $doit $rmcmd -f "$dst" 2>/dev/null ||

- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&

- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }

- } ||

- { echo "$0: cannot unlink or rename $dst" >&2

- (exit 1); exit 1

- }

- } &&

-

- # Now rename the file to the real destination.

- $doit $mvcmd "$dsttmp" "$dst"

- }

- fi || exit 1

-

- trap '' 0

- fi

-done

-

-# Local variables:

-# eval: (add-hook 'write-file-hooks 'time-stamp)

-# time-stamp-start: "scriptversion="

-# time-stamp-format: "%:y-%02m-%02d.%02H"

-# time-stamp-time-zone: "UTC"

-# time-stamp-end: "; # UTC"

-# End:

-# Makefile.in generated by automake 1.11.1 from Makefile.am.

-# @configure_input@

-

-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,

-# Inc.

-# This Makefile.in is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# This program is distributed in the hope that it will be useful,

-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

-# PARTICULAR PURPOSE.

-

-@SET_MAKE@

-

-

-VPATH = @srcdir@

-pkgdatadir = $(datadir)/@PACKAGE@

-pkgincludedir = $(includedir)/@PACKAGE@

-pkglibdir = $(libdir)/@PACKAGE@

-pkglibexecdir = $(libexecdir)/@PACKAGE@

-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

-install_sh_DATA = $(install_sh) -c -m 644

-install_sh_PROGRAM = $(install_sh) -c

-install_sh_SCRIPT = $(install_sh) -c

-INSTALL_HEADER = $(INSTALL_DATA)

-transform = $(program_transform_name)

-NORMAL_INSTALL = :

-PRE_INSTALL = :

-POST_INSTALL = :

-NORMAL_UNINSTALL = :

-PRE_UNINSTALL = :

-POST_UNINSTALL = :

-subdir = macros2

-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in

-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

-am__aclocal_m4_deps = $(top_srcdir)/configure.in

-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

- $(ACLOCAL_M4)

-mkinstalldirs = $(install_sh) -d

-CONFIG_CLEAN_FILES =

-CONFIG_CLEAN_VPATH_FILES =

-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;

-am__vpath_adj = case $$p in \

- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \

- *) f=$$p;; \

- esac;

-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;

-am__install_max = 40

-am__nobase_strip_setup = \

- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`

-am__nobase_strip = \

- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"

-am__nobase_list = $(am__nobase_strip_setup); \

- for p in $$list; do echo "$$p $$p"; done | \

- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \

- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \

- if (++n[$$2] == $(am__install_max)) \

- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \

- END { for (dir in files) print dir, files[dir] }'

-am__base_list = \

- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \

- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'

-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(aclocaldir)"

-SCRIPTS = $(bin_SCRIPTS)

-AM_V_GEN = $(am__v_GEN_$(V))

-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))

-am__v_GEN_0 = @echo " GEN " $@;

-AM_V_at = $(am__v_at_$(V))

-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))

-am__v_at_0 = @

-SOURCES =

-DIST_SOURCES =

-DATA = $(aclocal_DATA)

-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

-ACLOCAL = @ACLOCAL@

-AMTAR = @AMTAR@

-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@

-AUTOCONF = @AUTOCONF@

-AUTOHEADER = @AUTOHEADER@

-AUTOMAKE = @AUTOMAKE@

-AWK = @AWK@

-CYGPATH_W = @CYGPATH_W@

-DEFS = @DEFS@

-ECHO_C = @ECHO_C@

-ECHO_N = @ECHO_N@

-ECHO_T = @ECHO_T@

-INSTALL = @INSTALL@

-INSTALL_DATA = @INSTALL_DATA@

-INSTALL_PROGRAM = @INSTALL_PROGRAM@

-INSTALL_SCRIPT = @INSTALL_SCRIPT@

-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

-LIBOBJS = @LIBOBJS@

-LIBS = @LIBS@

-LTLIBOBJS = @LTLIBOBJS@

-MAINT = @MAINT@

-MAKEINFO = @MAKEINFO@

-MKDIR_P = @MKDIR_P@

-PACKAGE = @PACKAGE@

-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

-PACKAGE_NAME = @PACKAGE_NAME@

-PACKAGE_STRING = @PACKAGE_STRING@

-PACKAGE_TARNAME = @PACKAGE_TARNAME@

-PACKAGE_URL = @PACKAGE_URL@

-PACKAGE_VERSION = @PACKAGE_VERSION@

-PATH_SEPARATOR = @PATH_SEPARATOR@

-SET_MAKE = @SET_MAKE@

-SHELL = @SHELL@

-STRIP = @STRIP@

-VERSION = @VERSION@

-abs_builddir = @abs_builddir@

-abs_srcdir = @abs_srcdir@

-abs_top_builddir = @abs_top_builddir@

-abs_top_srcdir = @abs_top_srcdir@

-am__leading_dot = @am__leading_dot@

-am__tar = @am__tar@

-am__untar = @am__untar@

-bindir = @bindir@

-build_alias = @build_alias@

-builddir = @builddir@

-datadir = @datadir@

-datarootdir = @datarootdir@

-docdir = @docdir@

-dvidir = @dvidir@

-exec_prefix = @exec_prefix@

-host_alias = @host_alias@

-htmldir = @htmldir@

-includedir = @includedir@

-infodir = @infodir@

-install_sh = @install_sh@

-libdir = @libdir@

-libexecdir = @libexecdir@

-localedir = @localedir@

-localstatedir = @localstatedir@

-mandir = @mandir@

-mkdir_p = @mkdir_p@

-oldincludedir = @oldincludedir@

-pdfdir = @pdfdir@

-prefix = @prefix@

-program_transform_name = @program_transform_name@

-psdir = @psdir@

-sbindir = @sbindir@

-sharedstatedir = @sharedstatedir@

-srcdir = @srcdir@

-sysconfdir = @sysconfdir@

-target_alias = @target_alias@

-top_build_prefix = @top_build_prefix@

-top_builddir = @top_builddir@

-top_srcdir = @top_srcdir@

-MATE2_MACROS = \

- mate-common.m4 \

- mate-compiler-flags.m4

-

-EXTRA_DIST = $(MATE2_MACROS) mate-autogen.sh

-aclocaldir = $(datadir)/aclocal

-aclocal_DATA = $(MATE2_MACROS)

-bin_SCRIPTS = mate-autogen.sh

-all: all-am

-

-.SUFFIXES:

-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)

- @for dep in $?; do \

- case '$(am__configure_deps)' in \

- *$$dep*) \

- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \

- && { if test -f $@; then exit 0; else break; fi; }; \

- exit 1;; \

- esac; \

- done; \

- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign macros2/Makefile'; \

- $(am__cd) $(top_srcdir) && \

- $(AUTOMAKE) --foreign macros2/Makefile

-.PRECIOUS: Makefile

-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

- @case '$?' in \

- *config.status*) \

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \

- *) \

- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \

- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \

- esac;

-

-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

-

-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

-$(am__aclocal_m4_deps):

-install-binSCRIPTS: $(bin_SCRIPTS)

- @$(NORMAL_INSTALL)

- test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"

- @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \

- for p in $$list; do \

- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \

- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \

- done | \

- sed -e 'p;s,.*/,,;n' \

- -e 'h;s|.*|.|' \

- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \

- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \

- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \

- if ($$2 == $$4) { files[d] = files[d] " " $$1; \

- if (++n[d] == $(am__install_max)) { \

- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \

- else { print "f", d "/" $$4, $$1 } } \

- END { for (d in files) print "f", d, files[d] }' | \

- while read type dir files; do \

- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \

- test -z "$$files" || { \

- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \

- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \

- } \

- ; done

-

-uninstall-binSCRIPTS:

- @$(NORMAL_UNINSTALL)

- @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \

- files=`for p in $$list; do echo "$$p"; done | \

- sed -e 's,.*/,,;$(transform)'`; \

- test -n "$$list" || exit 0; \

- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \

- cd "$(DESTDIR)$(bindir)" && rm -f $$files

-install-aclocalDATA: $(aclocal_DATA)

- @$(NORMAL_INSTALL)

- test -z "$(aclocaldir)" || $(MKDIR_P) "$(DESTDIR)$(aclocaldir)"

- @list='$(aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \

- for p in $$list; do \

- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \

- echo "$$d$$p"; \

- done | $(am__base_list) | \

- while read files; do \

- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(aclocaldir)'"; \

- $(INSTALL_DATA) $$files "$(DESTDIR)$(aclocaldir)" || exit $$?; \

- done

-

-uninstall-aclocalDATA:

- @$(NORMAL_UNINSTALL)

- @list='$(aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \

- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \

- test -n "$$files" || exit 0; \

- echo " ( cd '$(DESTDIR)$(aclocaldir)' && rm -f" $$files ")"; \

- cd "$(DESTDIR)$(aclocaldir)" && rm -f $$files

-tags: TAGS

-TAGS:

-

-ctags: CTAGS

-CTAGS:

-

-

-distdir: $(DISTFILES)

- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

- list='$(DISTFILES)'; \

- dist_files=`for file in $$list; do echo $$file; done | \

- sed -e "s|^$$srcdirstrip/||;t" \

- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

- case $$dist_files in \

- */*) $(MKDIR_P) `echo "$$dist_files" | \

- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

- sort -u` ;; \

- esac; \

- for file in $$dist_files; do \

- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

- if test -d $$d/$$file; then \

- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

- if test -d "$(distdir)/$$file"; then \

- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

- fi; \

- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

- fi; \

- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

- else \

- test -f "$(distdir)/$$file" \

- || cp -p $$d/$$file "$(distdir)/$$file" \

- || exit 1; \

- fi; \

- done

-check-am: all-am

-check: check-am

-all-am: Makefile $(SCRIPTS) $(DATA)

-installdirs:

- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(aclocaldir)"; do \

- test -z "$$dir" || $(MKDIR_P) "$$dir"; \

- done

-install: install-am

-install-exec: install-exec-am

-install-data: install-data-am

-uninstall: uninstall-am

-

-install-am: all-am

- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

-

-installcheck: installcheck-am

-install-strip:

- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

- `test -z '$(STRIP)' || \

- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install

-mostlyclean-generic:

-

-clean-generic:

-

-distclean-generic:

- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

-

-maintainer-clean-generic:

- @echo "This command is intended for maintainers to use"

- @echo "it deletes files that may require special tools to rebuild."

-clean: clean-am

-

-clean-am: clean-generic mostlyclean-am

-

-distclean: distclean-am

- -rm -f Makefile

-distclean-am: clean-am distclean-generic

-

-dvi: dvi-am

-

-dvi-am:

-

-html: html-am

-

-html-am:

-

-info: info-am

-

-info-am:

-

-install-data-am: install-aclocalDATA

-

-install-dvi: install-dvi-am

-

-install-dvi-am:

-

-install-exec-am: install-binSCRIPTS

-

-install-html: install-html-am

-

-install-html-am:

-

-install-info: install-info-am

-

-install-info-am:

-

-install-man:

-

-install-pdf: install-pdf-am

-

-install-pdf-am:

-

-install-ps: install-ps-am

-

-install-ps-am:

-

-installcheck-am:

-

-maintainer-clean: maintainer-clean-am

- -rm -f Makefile

-maintainer-clean-am: distclean-am maintainer-clean-generic

-

-mostlyclean: mostlyclean-am

-

-mostlyclean-am: mostlyclean-generic

-

-pdf: pdf-am

-

-pdf-am:

-

-ps: ps-am

-

-ps-am:

-

-uninstall-am: uninstall-aclocalDATA uninstall-binSCRIPTS

-

-.MAKE: install-am install-strip

-

-.PHONY: all all-am check check-am clean clean-generic distclean \

- distclean-generic distdir dvi dvi-am html html-am info info-am \

- install install-aclocalDATA install-am install-binSCRIPTS \

- install-data install-data-am install-dvi install-dvi-am \

- install-exec install-exec-am install-html install-html-am \

- install-info install-info-am install-man install-pdf \

- install-pdf-am install-ps install-ps-am install-strip \

- installcheck installcheck-am installdirs maintainer-clean \

- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \

- pdf-am ps ps-am uninstall uninstall-aclocalDATA uninstall-am \

- uninstall-binSCRIPTS

-

-

-# Tell versions [3.59,3.63) of GNU make to not export all variables.

-# Otherwise a system limit (for SysV at least) may be exceeded.

-.NOEXPORT:

-<Project xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"

- xmlns:rdfs="http://www.w3.org/2000/01/rdf-schema#"

- xmlns:foaf="http://xmlns.com/foaf/0.1/"

- xmlns:mate="http://api.gnome.org/doap-extensions#"

- xmlns="http://usefulinc.com/ns/doap#">

-

- <name xml:lang="en">Common files</name>

- <shortdesc xml:lang="en">A module that is required only when building MATE from the repository.</shortdesc>

- <download-page rdf:resource="http://download.gnome.org/sources/mate-common/" />

- <bug-database rdf:resource="http://bugzilla.gnome.org/browse.cgi?product=mate-common" />

- <category rdf:resource="http://api.gnome.org/doap-extensions#development" />

-

- <maintainer>

- <foaf:Person>

- <foaf:name>Christian Persch</foaf:name>

- <foaf:mbox rdf:resource="mailto:[email protected]"/>

- <mate:userid>chpe</mate:userid>

- </foaf:Person>

- </maintainer>

-</Project>

-#! /bin/sh

-# Common stub for a few missing GNU programs while installing.

-

-scriptversion=2009-04-28.21; # UTC

-

-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,

-# 2008, 2009 Free Software Foundation, Inc.

-# Originally by Fran,cois Pinard <[email protected]>, 1996.

-

-# This program is free software; you can redistribute it and/or modify

-# it under the terms of the GNU General Public License as published by

-# the Free Software Foundation; either version 2, or (at your option)

-# any later version.

-

-# This program is distributed in the hope that it will be useful,

-# but WITHOUT ANY WARRANTY; without even the implied warranty of

-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

-# GNU General Public License for more details.

-

-# You should have received a copy of the GNU General Public License

-# along with this program. If not, see <http://www.gnu.org/licenses/>.

-

-# As a special exception to the GNU General Public License, if you

-# distribute this file as part of a program that contains a

-# configuration script generated by Autoconf, you may include it under

-# the same distribution terms that you use for the rest of that program.

-

-if test $# -eq 0; then

- echo 1>&2 "Try \`$0 --help' for more information"

- exit 1

-fi

-

-run=:

-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'

-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'

-

-# In the cases where this matters, `missing' is being run in the

-# srcdir already.

-if test -f configure.ac; then

- configure_ac=configure.ac

-else

- configure_ac=configure.in

-fi

-

-msg="missing on your system"

-

-case $1 in

---run)

- # Try to run requested program, and just exit if it succeeds.

- run=

- shift

- "$@" && exit 0

- # Exit code 63 means version mismatch. This often happens

- # when the user try to use an ancient version of a tool on

- # a file that requires a minimum version. In this case we

- # we should proceed has if the program had been absent, or

- # if --run hadn't been passed.

- if test $? = 63; then

- run=:

- msg="probably too old"

- fi

- ;;

-

- -h|--h|--he|--hel|--help)

- echo "\

-$0 [OPTION]... PROGRAM [ARGUMENT]...

-

-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an

-error status if there is no known handling for PROGRAM.

-

-Options:

- -h, --help display this help and exit

- -v, --version output version information and exit

- --run try to run the given command, and emulate it if it fails

-

-Supported PROGRAM values:

- aclocal touch file \`aclocal.m4'

- autoconf touch file \`configure'

- autoheader touch file \`config.h.in'

- autom4te touch the output file, or create a stub one

- automake touch all \`Makefile.in' files

- bison create \`y.tab.[ch]', if possible, from existing .[ch]

- flex create \`lex.yy.c', if possible, from existing .c

- help2man touch the output file

- lex create \`lex.yy.c', if possible, from existing .c

- makeinfo touch the output file

- tar try tar, gnutar, gtar, then tar without non-portable flags

- yacc create \`y.tab.[ch]', if possible, from existing .[ch]

-

-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and

-\`g' are ignored when checking the name.

-

-Send bug reports to <[email protected]>."

- exit $?

- ;;

-

- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)

- echo "missing $scriptversion (GNU Automake)"

- exit $?

- ;;

-

- -*)

- echo 1>&2 "$0: Unknown \`$1' option"

- echo 1>&2 "Try \`$0 --help' for more information"

- exit 1

- ;;

-

-esac

-

-# normalize program name to check for.

-program=`echo "$1" | sed '

- s/^gnu-//; t

- s/^gnu//; t

- s/^g//; t'`

-

-# Now exit if we have it, but it failed. Also exit now if we

-# don't have it and --version was passed (most likely to detect

-# the program). This is about non-GNU programs, so use $1 not

-# $program.

-case $1 in

- lex*|yacc*)

- # Not GNU programs, they don't have --version.

- ;;

-

- tar*)

- if test -n "$run"; then

- echo 1>&2 "ERROR: \`tar' requires --run"

- exit 1

- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then

- exit 1

- fi

- ;;

-

- *)

- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then

- # We have it, but it failed.

- exit 1

- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then

- # Could not run --version or --help. This is probably someone

- # running `$TOOL --version' or `$TOOL --help' to check whether

- # $TOOL exists and not knowing $TOOL uses missing.

- exit 1

- fi

- ;;

-esac

-

-# If it does not exist, or fails to run (possibly an outdated version),

-# try to emulate it.

-case $program in

- aclocal*)

- echo 1>&2 "\

-WARNING: \`$1' is $msg. You should only need it if

- you modified \`acinclude.m4' or \`${configure_ac}'. You might want

- to install the \`Automake' and \`Perl' packages. Grab them from

- any GNU archive site."

- touch aclocal.m4

- ;;

-

- autoconf*)

- echo 1>&2 "\

-WARNING: \`$1' is $msg. You should only need it if

- you modified \`${configure_ac}'. You might want to install the

- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU

- archive site."

- touch configure

- ;;

-

- autoheader*)

- echo 1>&2 "\

-WARNING: \`$1' is $msg. You should only need it if

- you modified \`acconfig.h' or \`${configure_ac}'. You might want

- to install the \`Autoconf' and \`GNU m4' packages. Grab them

- from any GNU archive site."

- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`

- test -z "$files" && files="config.h"

- touch_files=

- for f in $files; do

- case $f in

- *:*) touch_files="$touch_files "`echo "$f" |

- sed -e 's/^[^:]*://' -e 's/:.*//'`;;

- *) touch_files="$touch_files $f.in";;

- esac

- done

- touch $touch_files

- ;;

-

- automake*)

- echo 1>&2 "\

-WARNING: \`$1' is $msg. You should only need it if

- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.

- You might want to install the \`Automake' and \`Perl' packages.

- Grab them from any GNU archive site."

- find . -type f -name Makefile.am -print |

- sed 's/\.am$/.in/' |

- while read f; do touch "$f"; done

- ;;

-

- autom4te*)

- echo 1>&2 "\

-WARNING: \`$1' is needed, but is $msg.

- You might have modified some files without having the

- proper tools for further handling them.

- You can get \`$1' as part of \`Autoconf' from any GNU

- archive site."

-

- file=`echo "$*" | sed -n "$sed_output"`

- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`

- if test -f "$file"; then

- touch $file

- else

- test -z "$file" || exec >$file

- echo "#! /bin/sh"

- echo "# Created by GNU Automake missing as a replacement of"

- echo "# $ $@"

- echo "exit 0"

- chmod +x $file

- exit 1

- fi

- ;;

-

- bison*|yacc*)

- echo 1>&2 "\

-WARNING: \`$1' $msg. You should only need it if

- you modified a \`.y' file. You may need the \`Bison' package

- in order for those modifications to take effect. You can get

- \`Bison' from any GNU archive site."

- rm -f y.tab.c y.tab.h

- if test $# -ne 1; then

- eval LASTARG="\${$#}"

- case $LASTARG in

- *.y)

- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`

- if test -f "$SRCFILE"; then

- cp "$SRCFILE" y.tab.c

- fi

- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`

- if test -f "$SRCFILE"; then

- cp "$SRCFILE" y.tab.h

- fi

- ;;

- esac

- fi

- if test ! -f y.tab.h; then

- echo >y.tab.h

- fi

- if test ! -f y.tab.c; then

- echo 'main() { return 0; }' >y.tab.c

- fi

- ;;

-

- lex*|flex*)

- echo 1>&2 "\

-WARNING: \`$1' is $msg. You should only need it if

- you modified a \`.l' file. You may need the \`Flex' package

- in order for those modifications to take effect. You can get

- \`Flex' from any GNU archive site."

- rm -f lex.yy.c

- if test $# -ne 1; then

- eval LASTARG="\${$#}"

- case $LASTARG in

- *.l)

- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`

- if test -f "$SRCFILE"; then

- cp "$SRCFILE" lex.yy.c

- fi

- ;;

- esac

- fi

- if test ! -f lex.yy.c; then

- echo 'main() { return 0; }' >lex.yy.c

- fi

- ;;

-

- help2man*)

- echo 1>&2 "\

-WARNING: \`$1' is $msg. You should only need it if

- you modified a dependency of a manual page. You may need the

- \`Help2man' package in order for those modifications to take

- effect. You can get \`Help2man' from any GNU archive site."

-

- file=`echo "$*" | sed -n "$sed_output"`

- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`

- if test -f "$file"; then

- touch $file

- else

- test -z "$file" || exec >$file

- echo ".ab help2man is required to generate this page"

- exit $?

- fi

- ;;

-

- makeinfo*)

- echo 1>&2 "\

-WARNING: \`$1' is $msg. You should only need it if

- you modified a \`.texi' or \`.texinfo' file, or any other file

- indirectly affecting the aspect of the manual. The spurious

- call might also be the consequence of using a buggy \`make' (AIX,

- DU, IRIX). You might want to install the \`Texinfo' package or

- the \`GNU make' package. Grab either from any GNU archive site."

- # The file to touch is that specified with -o ...

- file=`echo "$*" | sed -n "$sed_output"`

- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`

- if test -z "$file"; then

- # ... or it is the one specified with @setfilename ...

- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`

- file=`sed -n '

- /^@setfilename/{

- s/.* \([^ ]*\) *$/\1/

- p

- q

- }' $infile`

- # ... or it is derived from the source name (dir/f.texi becomes f.info)

- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info

- fi

- # If the file does not exist, the user really needs makeinfo;

- # let's fail without touching anything.

- test -f $file || exit 1

- touch $file

- ;;

-

- tar*)

- shift

-

- # We have already tried tar in the generic part.

- # Look for gnutar/gtar before invocation to avoid ugly error

- # messages.

- if (gnutar --version > /dev/null 2>&1); then

- gnutar "$@" && exit 0

- fi

- if (gtar --version > /dev/null 2>&1); then

- gtar "$@" && exit 0

- fi

- firstarg="$1"

- if shift; then

- case $firstarg in

- *o*)

- firstarg=`echo "$firstarg" | sed s/o//`

- tar "$firstarg" "$@" && exit 0

- ;;

- esac

- case $firstarg in

- *h*)

- firstarg=`echo "$firstarg" | sed s/h//`

- tar "$firstarg" "$@" && exit 0

- ;;

- esac

- fi

-

- echo 1>&2 "\

-WARNING: I can't seem to be able to run \`tar' with the given arguments.

- You may want to install GNU tar or Free paxutils, or check the

- command line arguments."

- exit 1

- ;;

-

- *)

- echo 1>&2 "\

-WARNING: \`$1' is needed, and is $msg.

- You might have modified some files without having the

- proper tools for further handling them. Check the \`README' file,

- it often tells you about the needed prerequisites for installing

- this package. You may also peek at any GNU archive site, in case

- some other package would contain this missing \`$1' program."

- exit 1

- ;;

-esac

-

-exit 0

-

-# Local variables:

-# eval: (add-hook 'write-file-hooks 'time-stamp)

-# time-stamp-start: "scriptversion="

-# time-stamp-format: "%:y-%02m-%02d.%02H"

-# time-stamp-time-zone: "UTC"

-# time-stamp-end: "; # UTC"

-# End: