moving from https://github.com/perberos/mate-desktop-environment

6 files changed, 637 insertions, 0 deletions

diff --git a/doc-build/Makefile.am b/doc-build/Makefile.am
new file mode 100644
index 0000000..5fa3a5f
--- /dev/null
+++ b/doc-build/Makefile.am
@@ -0,0 +1,12 @@
+bin_SCRIPTS = mate-doc-common
+
+pkgdatadir = $(datadir)/mate-common/data
+pkgdata_DATA =			\
+	omf.make		\
+	xmldocs.make		
+
+EXTRA_DIST =			\
+	omf.make		\
+	xmldocs.make		\
+	mate-doc-common.in	\
+	README
diff --git a/doc-build/Makefile.in b/doc-build/Makefile.in
new file mode 100644
index 0000000..ec35899
--- /dev/null
+++ b/doc-build/Makefile.in
@@ -0,0 +1,405 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+VPATH = @srcdir@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = doc-build
+DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(srcdir)/mate-doc-common.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES = mate-doc-common
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgdatadir)"
+SCRIPTS = $(bin_SCRIPTS)
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN   " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+SOURCES =
+DIST_SOURCES =
+DATA = $(pkgdata_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+pkgdatadir = $(datadir)/mate-common/data
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+am__leading_dot = @am__leading_dot@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+bin_SCRIPTS = mate-doc-common
+pkgdata_DATA = \
+	omf.make		\
+	xmldocs.make		
+
+EXTRA_DIST = \
+	omf.make		\
+	xmldocs.make		\
+	mate-doc-common.in	\
+	README
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc-build/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign doc-build/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+mate-doc-common: $(top_builddir)/config.status $(srcdir)/mate-doc-common.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-binSCRIPTS: $(bin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	     } \
+	; done
+
+uninstall-binSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+install-pkgdataDATA: $(pkgdata_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)"
+	@list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
+	done
+
+uninstall-pkgdataDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(pkgdatadir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(pkgdatadir)" && rm -f $$files
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(SCRIPTS) $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgdatadir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-pkgdataDATA
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binSCRIPTS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binSCRIPTS uninstall-pkgdataDATA
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+	distclean-generic distdir dvi dvi-am html html-am info info-am \
+	install install-am install-binSCRIPTS install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-pkgdataDATA install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am uninstall uninstall-am uninstall-binSCRIPTS \
+	uninstall-pkgdataDATA
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/doc-build/README b/doc-build/README
new file mode 100644
index 0000000..6b44642
--- /dev/null
+++ b/doc-build/README
@@ -0,0 +1,9 @@
+To automatically include the standard user documentation build files (omf.make
+and xmldocs.make) in you package, set USE_COMMON_DOC_BUILD=yes in autogen.sh
+before calling the macros2/autogen.sh script.
+
+When porting applications across to use this feature, ensure that all of the
+references to xmldocs.make are to $(top_srcdir)/xmldocs.make in the appropriate
+Makefile.am files. Some modules assume that xmldocs.make is in another
+directory (like docs/ or something).
+
diff --git a/doc-build/mate-doc-common.in b/doc-build/mate-doc-common.in
new file mode 100644
index 0000000..b2216da
--- /dev/null
+++ b/doc-build/mate-doc-common.in
@@ -0,0 +1,49 @@
+#!/bin/sh
+
+progname=`echo "$0" | sed 's%^.*/%%'`
+
+PROGRAM=mate-doc-common
+PACKAGE=@PACKAGE@
+VERSION=@VERSION@
+
+prefix=@prefix@
+datarootdir=@datarootdir@
+datadir=@datadir@
+
+# options
+docdir=.
+copy=no
+
+while test $# -gt 0; do
+  case "$1" in
+  --help)
+    echo "usage: $progname [--version|--help]" 1>&2
+    exit 1 ;;
+  --version)
+    echo "$PROGRAM ($PACKAGE) $VERSION"
+    exit 0 ;;
+  --copy)
+    copy=yes
+    shift ;;
+  -*)
+    echo "$progname: unrecognised option '$1'" 1>&2
+    echo "usage: $progname [--version|--help]" 1>&2
+    exit 1 ;;
+  *)
+    echo "$progname: too many arguments" 1>&2
+    echo "usage: $progname [--version|--help]" 1>&2
+    exit 1 ;;
+  esac
+done
+
+for file in omf.make xmldocs.make; do
+  rm -f $docdir/$file
+  if test "$copy" = yes; then
+    cp -f $datadir/$PACKAGE/data/$file $docdir/ ||
+      exit 1
+  else
+    ln -sf $datadir/$PACKAGE/data/$file $docdir/ ||
+      cp -f $datadir/$PACKAGE/data/$file $docdir/ ||
+      exit 1
+  fi
+done
diff --git a/doc-build/omf.make b/doc-build/omf.make
new file mode 100644
index 0000000..cb7acba
--- /dev/null
+++ b/doc-build/omf.make
@@ -0,0 +1,61 @@
+# 
+# No modifications of this Makefile should be necessary.
+#
+# This file contains the build instructions for installing OMF files.  It is
+# generally called from the makefiles for particular formats of documentation.
+#
+# Note that you must configure your package with --localstatedir=/var
+# so that the scrollkeeper-update command below will update the database
+# in the standard scrollkeeper directory.
+#
+# If it is impossible to configure with --localstatedir=/var, then
+# modify the definition of scrollkeeper_localstate_dir so that
+# it points to the correct location. Note that you must still use 
+# $(localstatedir) in this or when people build RPMs it will update
+# the real database on their system instead of the one under RPM_BUILD_ROOT.
+#
+# Note: This make file is not incorporated into xmldocs.make because, in
+#       general, there will be other documents install besides XML documents
+#       and the makefiles for these formats should also include this file.
+#
+# About this file:
+#	This file was derived from scrollkeeper_example2, a package
+#	illustrating how to install documentation and OMF files for use with
+#	ScrollKeeper 0.3.x and 0.4.x.  For more information, see:
+#		http://scrollkeeper.sourceforge.net/	
+# 	Version: 0.1.3 (last updated: March 20, 2002)
+#
+
+omf_dest_dir=$(datadir)/omf/@PACKAGE@
+scrollkeeper_localstate_dir = $(localstatedir)/scrollkeeper
+
+# At some point, it may be wise to change to something like this:
+# scrollkeeper_localstate_dir = @SCROLLKEEPER_STATEDIR@
+
+omf: omf_timestamp
+
+omf_timestamp: $(omffile)
+	-for file in $(omffile); do \
+	  scrollkeeper-preinstall $(docdir)/$(docname).xml $(srcdir)/$$file $$file.out; \
+	done; \
+	touch omf_timestamp
+
+install-data-hook-omf:
+	$(mkinstalldirs) $(DESTDIR)$(omf_dest_dir)
+	for file in $(omffile); do \
+		$(INSTALL_DATA) $$file.out $(DESTDIR)$(omf_dest_dir)/$$file; \
+	done
+	-scrollkeeper-update -p $(DESTDIR)$(scrollkeeper_localstate_dir) -o $(DESTDIR)$(omf_dest_dir)
+
+uninstall-local-omf:
+	-for file in $(srcdir)/*.omf; do \
+		basefile=`basename $$file`; \
+		rm -f $(DESTDIR)$(omf_dest_dir)/$$basefile; \
+	done
+	-rmdir $(DESTDIR)$(omf_dest_dir)
+	-scrollkeeper-update -p $(DESTDIR)$(scrollkeeper_localstate_dir)
+
+clean-local-omf:
+	-for file in $(omffile); do \
+		rm -f $$file.out; \
+	done
diff --git a/doc-build/xmldocs.make b/doc-build/xmldocs.make
new file mode 100644
index 0000000..0bc375c
--- /dev/null
+++ b/doc-build/xmldocs.make
@@ -0,0 +1,101 @@
+#
+# No modifications of this Makefile should be necessary.
+#
+# To use this template:
+#     1) Define: figdir, docname, lang, omffile, and entities in
+#        your Makefile.am file for each document directory,
+#        although figdir, omffile, and entities may be empty
+#     2) Make sure the Makefile in (1) also includes 
+#	 "include $(top_srcdir)/xmldocs.make" and
+#	 "dist-hook: app-dist-hook".
+#     3) Optionally define 'entities' to hold xml entities which
+#        you would also like installed
+#     4) Figures must go under $(figdir)/ and be in PNG format
+#     5) You should only have one document per directory 
+#     6) Note that the figure directory, $(figdir)/, should not have its
+#        own Makefile since this Makefile installs those figures.
+#
+# example Makefile.am:
+#   figdir = figures
+#   docname = scrollkeeper-manual
+#   lang = C
+#   omffile=scrollkeeper-manual-C.omf
+#   entities = fdl.xml
+#   include $(top_srcdir)/xmldocs.make
+#   dist-hook: app-dist-hook
+#
+# About this file:
+#	This file was taken from scrollkeeper_example2, a package illustrating
+#	how to install documentation and OMF files for use with ScrollKeeper 
+#	0.3.x and 0.4.x.  For more information, see:
+#		http://scrollkeeper.sourceforge.net/
+#	Version: 0.1.2 (last updated: March 20, 2002)
+#
+
+
+# **********  Begin of section some packagers may need to modify  **********
+# This variable (docdir) specifies where the documents should be installed.
+# This default value should work for most packages.
+docdir = $(datadir)/mate/help/$(docname)/$(lang)
+
+# **********  You should not have to edit below this line  **********
+xml_files = $(entities) $(docname).xml
+
+EXTRA_DIST = $(xml_files) $(omffile)
+CLEANFILES = omf_timestamp
+
+include $(top_srcdir)/omf.make
+
+all: omf
+
+$(docname).xml: $(entities)
+	-ourdir=`pwd`;  \
+	cd $(srcdir);   \
+	cp $(entities) $$ourdir
+
+app-dist-hook:
+	if test "$(figdir)"; then \
+	  $(mkinstalldirs) $(distdir)/$(figdir); \
+	  for file in $(srcdir)/$(figdir)/*.png; do \
+	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
+	    $(INSTALL_DATA) $$file $(distdir)/$(figdir)/$$basefile; \
+	  done \
+	fi
+
+install-data-local: omf
+	$(mkinstalldirs) $(DESTDIR)$(docdir)
+	for file in $(xml_files); do \
+	  cp $(srcdir)/$$file $(DESTDIR)$(docdir); \
+	done
+	if test "$(figdir)"; then \
+	  $(mkinstalldirs) $(DESTDIR)$(docdir)/$(figdir); \
+	  for file in $(srcdir)/$(figdir)/*.png; do \
+	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
+	    $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \
+	  done \
+	fi
+
+install-data-hook: install-data-hook-omf
+
+uninstall-local: uninstall-local-doc uninstall-local-omf
+
+uninstall-local-doc:
+	-if test "$(figdir)"; then \
+	  for file in $(srcdir)/$(figdir)/*.png; do \
+	    basefile=`echo $$file | sed -e  's,^.*/,,'`; \
+	    rm -f $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \
+	  done; \
+	  rmdir $(DESTDIR)$(docdir)/$(figdir); \
+	fi
+	-for file in $(xml_files); do \
+	  rm -f $(DESTDIR)$(docdir)/$$file; \
+	done
+	-rmdir $(DESTDIR)$(docdir)
+
+clean-local: clean-local-doc clean-local-omf
+
+# for non-srcdir builds, remove the copied entities.
+clean-local-doc:
+	if test $(srcdir) != .; then \
+	  rm -f $(entities); \
+	fi