diff options
Diffstat (limited to 'doc-build')
| -rw-r--r-- | doc-build/Makefile.am | 12 | ||||
| -rw-r--r-- | doc-build/Makefile.in | 405 | ||||
| -rw-r--r-- | doc-build/README | 9 | ||||
| -rw-r--r-- | doc-build/mate-doc-common.in | 49 | ||||
| -rw-r--r-- | doc-build/omf.make | 61 | ||||
| -rw-r--r-- | doc-build/xmldocs.make | 101 |
6 files changed, 637 insertions, 0 deletions
diff --git a/doc-build/Makefile.am b/doc-build/Makefile.am new file mode 100644 index 0000000..5fa3a5f --- /dev/null +++ b/doc-build/Makefile.am @@ -0,0 +1,12 @@ +bin_SCRIPTS = mate-doc-common + +pkgdatadir = $(datadir)/mate-common/data +pkgdata_DATA = \ + omf.make \ + xmldocs.make + +EXTRA_DIST = \ + omf.make \ + xmldocs.make \ + mate-doc-common.in \ + README diff --git a/doc-build/Makefile.in b/doc-build/Makefile.in new file mode 100644 index 0000000..ec35899 --- /dev/null +++ b/doc-build/Makefile.in @@ -0,0 +1,405 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + + +VPATH = @srcdir@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = doc-build +DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(srcdir)/mate-doc-common.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_CLEAN_FILES = mate-doc-common +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgdatadir)" +SCRIPTS = $(bin_SCRIPTS) +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +SOURCES = +DIST_SOURCES = +DATA = $(pkgdata_DATA) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +pkgdatadir = $(datadir)/mate-common/data +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +bin_SCRIPTS = mate-doc-common +pkgdata_DATA = \ + omf.make \ + xmldocs.make + +EXTRA_DIST = \ + omf.make \ + xmldocs.make \ + mate-doc-common.in \ + README + +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc-build/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc-build/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +mate-doc-common: $(top_builddir)/config.status $(srcdir)/mate-doc-common.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ +install-binSCRIPTS: $(bin_SCRIPTS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" + @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files +install-pkgdataDATA: $(pkgdata_DATA) + @$(NORMAL_INSTALL) + test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" + @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \ + done + +uninstall-pkgdataDATA: + @$(NORMAL_UNINSTALL) + @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(pkgdatadir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(pkgdatadir)" && rm -f $$files +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(SCRIPTS) $(DATA) +installdirs: + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgdatadir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-pkgdataDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binSCRIPTS + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binSCRIPTS uninstall-pkgdataDATA + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic distclean \ + distclean-generic distdir dvi dvi-am html html-am info info-am \ + install install-am install-binSCRIPTS install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-pkgdataDATA install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am uninstall uninstall-am uninstall-binSCRIPTS \ + uninstall-pkgdataDATA + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc-build/README b/doc-build/README new file mode 100644 index 0000000..6b44642 --- /dev/null +++ b/doc-build/README @@ -0,0 +1,9 @@ +To automatically include the standard user documentation build files (omf.make +and xmldocs.make) in you package, set USE_COMMON_DOC_BUILD=yes in autogen.sh +before calling the macros2/autogen.sh script. + +When porting applications across to use this feature, ensure that all of the +references to xmldocs.make are to $(top_srcdir)/xmldocs.make in the appropriate +Makefile.am files. Some modules assume that xmldocs.make is in another +directory (like docs/ or something). + diff --git a/doc-build/mate-doc-common.in b/doc-build/mate-doc-common.in new file mode 100644 index 0000000..b2216da --- /dev/null +++ b/doc-build/mate-doc-common.in @@ -0,0 +1,49 @@ +#!/bin/sh + +progname=`echo "$0" | sed 's%^.*/%%'` + +PROGRAM=mate-doc-common +PACKAGE=@PACKAGE@ +VERSION=@VERSION@ + +prefix=@prefix@ +datarootdir=@datarootdir@ +datadir=@datadir@ + +# options +docdir=. +copy=no + +while test $# -gt 0; do + case "$1" in + --help) + echo "usage: $progname [--version|--help]" 1>&2 + exit 1 ;; + --version) + echo "$PROGRAM ($PACKAGE) $VERSION" + exit 0 ;; + --copy) + copy=yes + shift ;; + -*) + echo "$progname: unrecognised option '$1'" 1>&2 + echo "usage: $progname [--version|--help]" 1>&2 + exit 1 ;; + *) + echo "$progname: too many arguments" 1>&2 + echo "usage: $progname [--version|--help]" 1>&2 + exit 1 ;; + esac +done + +for file in omf.make xmldocs.make; do + rm -f $docdir/$file + if test "$copy" = yes; then + cp -f $datadir/$PACKAGE/data/$file $docdir/ || + exit 1 + else + ln -sf $datadir/$PACKAGE/data/$file $docdir/ || + cp -f $datadir/$PACKAGE/data/$file $docdir/ || + exit 1 + fi +done diff --git a/doc-build/omf.make b/doc-build/omf.make new file mode 100644 index 0000000..cb7acba --- /dev/null +++ b/doc-build/omf.make @@ -0,0 +1,61 @@ +# +# No modifications of this Makefile should be necessary. +# +# This file contains the build instructions for installing OMF files. It is +# generally called from the makefiles for particular formats of documentation. +# +# Note that you must configure your package with --localstatedir=/var +# so that the scrollkeeper-update command below will update the database +# in the standard scrollkeeper directory. +# +# If it is impossible to configure with --localstatedir=/var, then +# modify the definition of scrollkeeper_localstate_dir so that +# it points to the correct location. Note that you must still use +# $(localstatedir) in this or when people build RPMs it will update +# the real database on their system instead of the one under RPM_BUILD_ROOT. +# +# Note: This make file is not incorporated into xmldocs.make because, in +# general, there will be other documents install besides XML documents +# and the makefiles for these formats should also include this file. +# +# About this file: +# This file was derived from scrollkeeper_example2, a package +# illustrating how to install documentation and OMF files for use with +# ScrollKeeper 0.3.x and 0.4.x. For more information, see: +# http://scrollkeeper.sourceforge.net/ +# Version: 0.1.3 (last updated: March 20, 2002) +# + +omf_dest_dir=$(datadir)/omf/@PACKAGE@ +scrollkeeper_localstate_dir = $(localstatedir)/scrollkeeper + +# At some point, it may be wise to change to something like this: +# scrollkeeper_localstate_dir = @SCROLLKEEPER_STATEDIR@ + +omf: omf_timestamp + +omf_timestamp: $(omffile) + -for file in $(omffile); do \ + scrollkeeper-preinstall $(docdir)/$(docname).xml $(srcdir)/$$file $$file.out; \ + done; \ + touch omf_timestamp + +install-data-hook-omf: + $(mkinstalldirs) $(DESTDIR)$(omf_dest_dir) + for file in $(omffile); do \ + $(INSTALL_DATA) $$file.out $(DESTDIR)$(omf_dest_dir)/$$file; \ + done + -scrollkeeper-update -p $(DESTDIR)$(scrollkeeper_localstate_dir) -o $(DESTDIR)$(omf_dest_dir) + +uninstall-local-omf: + -for file in $(srcdir)/*.omf; do \ + basefile=`basename $$file`; \ + rm -f $(DESTDIR)$(omf_dest_dir)/$$basefile; \ + done + -rmdir $(DESTDIR)$(omf_dest_dir) + -scrollkeeper-update -p $(DESTDIR)$(scrollkeeper_localstate_dir) + +clean-local-omf: + -for file in $(omffile); do \ + rm -f $$file.out; \ + done diff --git a/doc-build/xmldocs.make b/doc-build/xmldocs.make new file mode 100644 index 0000000..0bc375c --- /dev/null +++ b/doc-build/xmldocs.make @@ -0,0 +1,101 @@ +# +# No modifications of this Makefile should be necessary. +# +# To use this template: +# 1) Define: figdir, docname, lang, omffile, and entities in +# your Makefile.am file for each document directory, +# although figdir, omffile, and entities may be empty +# 2) Make sure the Makefile in (1) also includes +# "include $(top_srcdir)/xmldocs.make" and +# "dist-hook: app-dist-hook". +# 3) Optionally define 'entities' to hold xml entities which +# you would also like installed +# 4) Figures must go under $(figdir)/ and be in PNG format +# 5) You should only have one document per directory +# 6) Note that the figure directory, $(figdir)/, should not have its +# own Makefile since this Makefile installs those figures. +# +# example Makefile.am: +# figdir = figures +# docname = scrollkeeper-manual +# lang = C +# omffile=scrollkeeper-manual-C.omf +# entities = fdl.xml +# include $(top_srcdir)/xmldocs.make +# dist-hook: app-dist-hook +# +# About this file: +# This file was taken from scrollkeeper_example2, a package illustrating +# how to install documentation and OMF files for use with ScrollKeeper +# 0.3.x and 0.4.x. For more information, see: +# http://scrollkeeper.sourceforge.net/ +# Version: 0.1.2 (last updated: March 20, 2002) +# + + +# ********** Begin of section some packagers may need to modify ********** +# This variable (docdir) specifies where the documents should be installed. +# This default value should work for most packages. +docdir = $(datadir)/mate/help/$(docname)/$(lang) + +# ********** You should not have to edit below this line ********** +xml_files = $(entities) $(docname).xml + +EXTRA_DIST = $(xml_files) $(omffile) +CLEANFILES = omf_timestamp + +include $(top_srcdir)/omf.make + +all: omf + +$(docname).xml: $(entities) + -ourdir=`pwd`; \ + cd $(srcdir); \ + cp $(entities) $$ourdir + +app-dist-hook: + if test "$(figdir)"; then \ + $(mkinstalldirs) $(distdir)/$(figdir); \ + for file in $(srcdir)/$(figdir)/*.png; do \ + basefile=`echo $$file | sed -e 's,^.*/,,'`; \ + $(INSTALL_DATA) $$file $(distdir)/$(figdir)/$$basefile; \ + done \ + fi + +install-data-local: omf + $(mkinstalldirs) $(DESTDIR)$(docdir) + for file in $(xml_files); do \ + cp $(srcdir)/$$file $(DESTDIR)$(docdir); \ + done + if test "$(figdir)"; then \ + $(mkinstalldirs) $(DESTDIR)$(docdir)/$(figdir); \ + for file in $(srcdir)/$(figdir)/*.png; do \ + basefile=`echo $$file | sed -e 's,^.*/,,'`; \ + $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \ + done \ + fi + +install-data-hook: install-data-hook-omf + +uninstall-local: uninstall-local-doc uninstall-local-omf + +uninstall-local-doc: + -if test "$(figdir)"; then \ + for file in $(srcdir)/$(figdir)/*.png; do \ + basefile=`echo $$file | sed -e 's,^.*/,,'`; \ + rm -f $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \ + done; \ + rmdir $(DESTDIR)$(docdir)/$(figdir); \ + fi + -for file in $(xml_files); do \ + rm -f $(DESTDIR)$(docdir)/$$file; \ + done + -rmdir $(DESTDIR)$(docdir) + +clean-local: clean-local-doc clean-local-omf + +# for non-srcdir builds, remove the copied entities. +clean-local-doc: + if test $(srcdir) != .; then \ + rm -f $(entities); \ + fi |