diff options
52 files changed, 0 insertions, 46546 deletions
diff --git a/INSTALL b/INSTALL deleted file mode 100644 index d3c5b40..0000000 --- a/INSTALL +++ /dev/null @@ -1,237 +0,0 @@ -Installation Instructions -************************* - -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007 Free Software Foundation, Inc. - -This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. - -Basic Installation -================== - -Briefly, the shell commands `./configure; make; make install' should -configure, build, and install this package. The following -more-detailed instructions are generic; see the `README' file for -instructions specific to this package. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). - - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. Caching is -disabled by default to prevent problems with accidental use of stale -cache files. - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You need `configure.ac' if -you want to change it or regenerate `configure' using a newer version -of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. - - Running `configure' might take a while. While running, it prints - some messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - - 6. Often, you can also type `make uninstall' to remove the installed - files again. - -Compilers and Options -===================== - -Some systems require unusual options for compilation or linking that the -`configure' script does not know about. Run `./configure --help' for -details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c99 CFLAGS=-g LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - -You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you can use GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - - With a non-GNU `make', it is safer to compile the package for one -architecture at a time in the source code directory. After you have -installed the package for one architecture, use `make distclean' before -reconfiguring for another architecture. - -Installation Names -================== - -By default, `make install' installs the package's commands under -`/usr/local/bin', include files under `/usr/local/include', etc. You -can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -pass the option `--exec-prefix=PREFIX' to `configure', the package uses -PREFIX as the prefix for installing programs and libraries. -Documentation and other data files still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=DIR' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - -Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - -Specifying the System Type -========================== - -There may be some features `configure' cannot figure out automatically, -but needs to determine by the type of machine the package will run on. -Usually, assuming the package is built to be run on the _same_ -architectures, `configure' can figure that out, but if it prints a -message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the option `--target=TYPE' to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - -If you want to set default values for `configure' scripts to share, you -can create a site shell script called `config.site' that gives default -values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - -Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). - -Unfortunately, this technique does not work for `CONFIG_SHELL' due to -an Autoconf bug. Until the bug is fixed you can use this workaround: - - CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash - -`configure' Invocation -====================== - -`configure' recognizes the following options to control how it operates. - -`--help' -`-h' - Print a summary of the options to `configure', and exit. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. - diff --git a/Makefile.in b/Makefile.in deleted file mode 100644 index 5481891..0000000 --- a/Makefile.in +++ /dev/null @@ -1,842 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -@HAVE_APPLETS_TRUE@am__append_1 = applets -subdir = . -DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(srcdir)/config.h.in \ - $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ - TODO compile config.guess config.sub depcomp install-sh \ - ltmain.sh missing mkinstalldirs -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir dist dist-all distcheck -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = src po docs man data help policy tools applets -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - { test ! -d "$(distdir)" \ - || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr "$(distdir)"; }; } -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -DIST_ARCHIVES = $(distdir).tar.gz -GZIP_ENV = --best -distuninstallcheck_listfiles = find . -type f -print -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = \ - --disable-schemas-install \ - --disable-scrollkeeper \ - --disable-applets \ - --disable-tests - -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -ACLOCAL_AMFLAGS = -I m4 -SUBDIRS = src po docs man data help policy tools $(am__append_1) -EXTRA_DIST = \ - HACKING \ - MAINTAINERS \ - intltool-extract.in \ - intltool-merge.in \ - intltool-update.in \ - omf.make \ - xmldocs.make \ - mate-doc-utils.make - -DISTCLEANFILES = \ - intltool-extract \ - intltool-merge \ - intltool-update \ - mate-power-manager-*.tar.gz - -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: -am--refresh: - @: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): - -config.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ - $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ - else :; fi - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool config.lt - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done - -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -755 \ - -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r "$(distdir)" -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -dist-lzma: distdir - tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma - $(am__remove_distdir) - -dist-xz: distdir - tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz - $(am__remove_distdir) - -dist-tarZ: distdir - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__remove_distdir) - -dist-shar: distdir - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__remove_distdir) - -dist dist-all: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lzma*) \ - lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/_build - mkdir $(distdir)/_inst - chmod a-w $(distdir) - test -d $(distdir)/_build || exit 0; \ - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ - && cd "$$am__cwd" \ - || exit 1 - $(am__remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @$(am__cd) '$(distuninstallcheck_dir)' \ - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-recursive -all-am: Makefile config.h -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool clean-local mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-hdr \ - distclean-libtool distclean-local distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ - ctags-recursive install-am install-strip tags-recursive - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am am--refresh check check-am clean clean-generic \ - clean-libtool clean-local ctags ctags-recursive dist dist-all \ - dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-xz \ - dist-zip distcheck distclean distclean-generic distclean-hdr \ - distclean-libtool distclean-local distclean-tags \ - distcleancheck distdir distuninstallcheck dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am - - -clean-local : - rm -f *~ - -snapshot: - $(MAKE) dist distdir=$(PACKAGE)-$(VERSION)-`date +"%Y%m%d"` - -distclean-local: - if test $(srdcir) = .; then :; else \ - rm -f ChangeLog; \ - fi - -ChangeLog: - @echo Creating $@ - @if test -d "$(srcdir)/.git"; then \ - (GIT_DIR=$(top_srcdir)/.git ./missing --run git log mate-2-26.. --stat -M -C --name-status --date=short --no-color) | fmt --split-only > [email protected] \ - && mv -f [email protected] $@ \ - || ($(RM) [email protected]; \ - echo Failed to generate ChangeLog, your ChangeLog may be outdated >&2; \ - (test -f $@ || echo git-log is required to generate this file >> $@)); \ - else \ - test -f $@ || \ - (echo A git checkout and git-log is required to generate ChangeLog >&2 && \ - echo A git checkout and git-log is required to generate this file >> $@); \ - fi - -.PHONY: ChangeLog - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/aclocal.m4 b/aclocal.m4 deleted file mode 100644 index d29bfd2..0000000 --- a/aclocal.m4 +++ /dev/null @@ -1,1930 +0,0 @@ -# generated automatically by aclocal 1.11.1 -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.66],, -[m4_warning([this file was generated for autoconf 2.66. -You have another version of autoconf. It may work, but is not guaranteed to. -If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically `autoreconf'.])]) - -dnl AM_MATECONF_SOURCE_2 -dnl Defines MATECONF_SCHEMA_CONFIG_SOURCE which is where you should install schemas -dnl (i.e. pass to mateconftool-2 -dnl Defines MATECONF_SCHEMA_FILE_DIR which is a filesystem directory where -dnl you should install foo.schemas files -dnl - -AC_DEFUN([AM_MATECONF_SOURCE_2], -[ - if test "x$MATECONF_SCHEMA_INSTALL_SOURCE" = "x"; then - MATECONF_SCHEMA_CONFIG_SOURCE=`mateconftool-2 --get-default-source` - else - MATECONF_SCHEMA_CONFIG_SOURCE=$MATECONF_SCHEMA_INSTALL_SOURCE - fi - - AC_ARG_WITH([mateconf-source], - AC_HELP_STRING([--with-mateconf-source=sourceaddress], - [Config database for installing schema files.]), - [MATECONF_SCHEMA_CONFIG_SOURCE="$withval"],) - - AC_SUBST(MATECONF_SCHEMA_CONFIG_SOURCE) - AC_MSG_RESULT([Using config source $MATECONF_SCHEMA_CONFIG_SOURCE for schema installation]) - - if test "x$MATECONF_SCHEMA_FILE_DIR" = "x"; then - MATECONF_SCHEMA_FILE_DIR='$(sysconfdir)/mateconf/schemas' - fi - - AC_ARG_WITH([mateconf-schema-file-dir], - AC_HELP_STRING([--with-mateconf-schema-file-dir=dir], - [Directory for installing schema files.]), - [MATECONF_SCHEMA_FILE_DIR="$withval"],) - - AC_SUBST(MATECONF_SCHEMA_FILE_DIR) - AC_MSG_RESULT([Using $MATECONF_SCHEMA_FILE_DIR as install directory for schema files]) - - AC_ARG_ENABLE(schemas-install, - AC_HELP_STRING([--disable-schemas-install], - [Disable the schemas installation]), - [case ${enableval} in - yes|no) ;; - *) AC_MSG_ERROR([bad value ${enableval} for --enable-schemas-install]) ;; - esac]) - AM_CONDITIONAL([MATECONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no]) -]) - -# Copyright (C) 1995-2002 Free Software Foundation, Inc. -# Copyright (C) 2001-2003,2004 Red Hat, Inc. -# -# This file is free software, distributed under the terms of the GNU -# General Public License. As a special exception to the GNU General -# Public License, this file may be distributed as part of a program -# that contains a configuration script generated by Autoconf, under -# the same distribution terms as the rest of that program. -# -# This file can be copied and used freely without restrictions. It can -# be used in projects which are not available under the GNU Public License -# but which still want to provide support for the GNU gettext functionality. -# -# Macro to add for using GNU gettext. -# Ulrich Drepper <[email protected]>, 1995, 1996 -# -# Modified to never use included libintl. -# Owen Taylor <[email protected]>, 12/15/1998 -# -# Major rework to remove unused code -# Owen Taylor <[email protected]>, 12/11/2002 -# -# Added better handling of ALL_LINGUAS from GNU gettext version -# written by Bruno Haible, Owen Taylor <otaylor.redhat.com> 5/30/3002 -# -# Modified to require ngettext -# Matthias Clasen <[email protected]> 08/06/2004 -# -# We need this here as well, since someone might use autoconf-2.5x -# to configure GLib then an older version to configure a package -# using AM_GLIB_GNU_GETTEXT -AC_PREREQ(2.53) - -dnl -dnl We go to great lengths to make sure that aclocal won't -dnl try to pull in the installed version of these macros -dnl when running aclocal in the glib directory. -dnl -m4_copy([AC_DEFUN],[glib_DEFUN]) -m4_copy([AC_REQUIRE],[glib_REQUIRE]) -dnl -dnl At the end, if we're not within glib, we'll define the public -dnl definitions in terms of our private definitions. -dnl - -# GLIB_LC_MESSAGES -#-------------------- -glib_DEFUN([GLIB_LC_MESSAGES], - [AC_CHECK_HEADERS([locale.h]) - if test $ac_cv_header_locale_h = yes; then - AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, - [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES], - am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) - if test $am_cv_val_LC_MESSAGES = yes; then - AC_DEFINE(HAVE_LC_MESSAGES, 1, - [Define if your <locale.h> file defines LC_MESSAGES.]) - fi - fi]) - -# GLIB_PATH_PROG_WITH_TEST -#---------------------------- -dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -glib_DEFUN([GLIB_PATH_PROG_WITH_TEST], -[# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL(ac_cv_path_$1, -[case "[$]$1" in - /*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in ifelse([$5], , $PATH, [$5]); do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then - AC_MSG_RESULT([$]$1) -else - AC_MSG_RESULT(no) -fi -AC_SUBST($1)dnl -]) - -# GLIB_WITH_NLS -#----------------- -glib_DEFUN([GLIB_WITH_NLS], - dnl NLS is obligatory - [USE_NLS=yes - AC_SUBST(USE_NLS) - - gt_cv_have_gettext=no - - CATOBJEXT=NONE - XGETTEXT=: - INTLLIBS= - - AC_CHECK_HEADER(libintl.h, - [gt_cv_func_dgettext_libintl="no" - libintl_extra_libs="" - - # - # First check in libc - # - AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc, - [AC_TRY_LINK([ -#include <libintl.h> -], - [return !ngettext ("","", 1)], - gt_cv_func_ngettext_libc=yes, - gt_cv_func_ngettext_libc=no) - ]) - - if test "$gt_cv_func_ngettext_libc" = "yes" ; then - AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc, - [AC_TRY_LINK([ -#include <libintl.h> -], - [return !dgettext ("","")], - gt_cv_func_dgettext_libc=yes, - gt_cv_func_dgettext_libc=no) - ]) - fi - - if test "$gt_cv_func_ngettext_libc" = "yes" ; then - AC_CHECK_FUNCS(bind_textdomain_codeset) - fi - - # - # If we don't have everything we want, check in libintl - # - if test "$gt_cv_func_dgettext_libc" != "yes" \ - || test "$gt_cv_func_ngettext_libc" != "yes" \ - || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then - - AC_CHECK_LIB(intl, bindtextdomain, - [AC_CHECK_LIB(intl, ngettext, - [AC_CHECK_LIB(intl, dgettext, - gt_cv_func_dgettext_libintl=yes)])]) - - if test "$gt_cv_func_dgettext_libintl" != "yes" ; then - AC_MSG_CHECKING([if -liconv is needed to use gettext]) - AC_MSG_RESULT([]) - AC_CHECK_LIB(intl, ngettext, - [AC_CHECK_LIB(intl, dcgettext, - [gt_cv_func_dgettext_libintl=yes - libintl_extra_libs=-liconv], - :,-liconv)], - :,-liconv) - fi - - # - # If we found libintl, then check in it for bind_textdomain_codeset(); - # we'll prefer libc if neither have bind_textdomain_codeset(), - # and both have dgettext and ngettext - # - if test "$gt_cv_func_dgettext_libintl" = "yes" ; then - glib_save_LIBS="$LIBS" - LIBS="$LIBS -lintl $libintl_extra_libs" - unset ac_cv_func_bind_textdomain_codeset - AC_CHECK_FUNCS(bind_textdomain_codeset) - LIBS="$glib_save_LIBS" - - if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then - gt_cv_func_dgettext_libc=no - else - if test "$gt_cv_func_dgettext_libc" = "yes" \ - && test "$gt_cv_func_ngettext_libc" = "yes"; then - gt_cv_func_dgettext_libintl=no - fi - fi - fi - fi - - if test "$gt_cv_func_dgettext_libc" = "yes" \ - || test "$gt_cv_func_dgettext_libintl" = "yes"; then - gt_cv_have_gettext=yes - fi - - if test "$gt_cv_func_dgettext_libintl" = "yes"; then - INTLLIBS="-lintl $libintl_extra_libs" - fi - - if test "$gt_cv_have_gettext" = "yes"; then - AC_DEFINE(HAVE_GETTEXT,1, - [Define if the GNU gettext() function is already present or preinstalled.]) - GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl - if test "$MSGFMT" != "no"; then - glib_save_LIBS="$LIBS" - LIBS="$LIBS $INTLLIBS" - AC_CHECK_FUNCS(dcgettext) - MSGFMT_OPTS= - AC_MSG_CHECKING([if msgfmt accepts -c]) - GLIB_RUN_PROG([$MSGFMT -c -o /dev/null],[ -msgid "" -msgstr "" -"Content-Type: text/plain; charset=UTF-8\n" -"Project-Id-Version: test 1.0\n" -"PO-Revision-Date: 2007-02-15 12:01+0100\n" -"Last-Translator: test <[email protected]>\n" -"Language-Team: C <[email protected]>\n" -"MIME-Version: 1.0\n" -"Content-Transfer-Encoding: 8bit\n" -], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])]) - AC_SUBST(MSGFMT_OPTS) - AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) - GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) - AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; - return _nl_msg_cat_cntr], - [CATOBJEXT=.gmo - DATADIRNAME=share], - [case $host in - *-*-solaris*) - dnl On Solaris, if bind_textdomain_codeset is in libc, - dnl GNU format message catalog is always supported, - dnl since both are added to the libc all together. - dnl Hence, we'd like to go with DATADIRNAME=share and - dnl and CATOBJEXT=.gmo in this case. - AC_CHECK_FUNC(bind_textdomain_codeset, - [CATOBJEXT=.gmo - DATADIRNAME=share], - [CATOBJEXT=.mo - DATADIRNAME=lib]) - ;; - *) - CATOBJEXT=.mo - DATADIRNAME=lib - ;; - esac]) - LIBS="$glib_save_LIBS" - INSTOBJEXT=.mo - else - gt_cv_have_gettext=no - fi - fi - ]) - - if test "$gt_cv_have_gettext" = "yes" ; then - AC_DEFINE(ENABLE_NLS, 1, - [always defined to indicate that i18n is enabled]) - fi - - dnl Test whether we really found GNU xgettext. - if test "$XGETTEXT" != ":"; then - dnl If it is not GNU xgettext we define it as : so that the - dnl Makefiles still can work. - if $XGETTEXT --omit-header /dev/null 2> /dev/null; then - : ; - else - AC_MSG_RESULT( - [found xgettext program is not GNU xgettext; ignore it]) - XGETTEXT=":" - fi - fi - - # We need to process the po/ directory. - POSUB=po - - AC_OUTPUT_COMMANDS( - [case "$CONFIG_FILES" in *po/Makefile.in*) - sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile - esac]) - - dnl These rules are solely for the distribution goal. While doing this - dnl we only have to keep exactly one list of the available catalogs - dnl in configure.ac. - for lang in $ALL_LINGUAS; do - GMOFILES="$GMOFILES $lang.gmo" - POFILES="$POFILES $lang.po" - done - - dnl Make all variables we use known to autoconf. - AC_SUBST(CATALOGS) - AC_SUBST(CATOBJEXT) - AC_SUBST(DATADIRNAME) - AC_SUBST(GMOFILES) - AC_SUBST(INSTOBJEXT) - AC_SUBST(INTLLIBS) - AC_SUBST(PO_IN_DATADIR_TRUE) - AC_SUBST(PO_IN_DATADIR_FALSE) - AC_SUBST(POFILES) - AC_SUBST(POSUB) - ]) - -# AM_GLIB_GNU_GETTEXT -# ------------------- -# Do checks necessary for use of gettext. If a suitable implementation -# of gettext is found in either in libintl or in the C library, -# it will set INTLLIBS to the libraries needed for use of gettext -# and AC_DEFINE() HAVE_GETTEXT and ENABLE_NLS. (The shell variable -# gt_cv_have_gettext will be set to "yes".) It will also call AC_SUBST() -# on various variables needed by the Makefile.in.in installed by -# glib-gettextize. -dnl -glib_DEFUN([GLIB_GNU_GETTEXT], - [AC_REQUIRE([AC_PROG_CC])dnl - AC_REQUIRE([AC_HEADER_STDC])dnl - - GLIB_LC_MESSAGES - GLIB_WITH_NLS - - if test "$gt_cv_have_gettext" = "yes"; then - if test "x$ALL_LINGUAS" = "x"; then - LINGUAS= - else - AC_MSG_CHECKING(for catalogs to be installed) - NEW_LINGUAS= - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - NEW_LINGUAS="$NEW_LINGUAS $presentlang" - fi - done - LINGUAS=$NEW_LINGUAS - AC_MSG_RESULT($LINGUAS) - fi - - dnl Construct list of names of catalog files to be constructed. - if test -n "$LINGUAS"; then - for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done - fi - fi - - dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly - dnl find the mkinstalldirs script in another subdir but ($top_srcdir). - dnl Try to locate is. - MKINSTALLDIRS= - if test -n "$ac_aux_dir"; then - MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" - fi - if test -z "$MKINSTALLDIRS"; then - MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" - fi - AC_SUBST(MKINSTALLDIRS) - - dnl Generate list of files to be processed by xgettext which will - dnl be included in po/Makefile. - test -d po || mkdir po - if test "x$srcdir" != "x."; then - if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then - posrcprefix="$srcdir/" - else - posrcprefix="../$srcdir/" - fi - else - posrcprefix="../" - fi - rm -f po/POTFILES - sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ - < $srcdir/po/POTFILES.in > po/POTFILES - ]) - -# AM_GLIB_DEFINE_LOCALEDIR(VARIABLE) -# ------------------------------- -# Define VARIABLE to the location where catalog files will -# be installed by po/Makefile. -glib_DEFUN([GLIB_DEFINE_LOCALEDIR], -[glib_REQUIRE([GLIB_GNU_GETTEXT])dnl -glib_save_prefix="$prefix" -glib_save_exec_prefix="$exec_prefix" -glib_save_datarootdir="$datarootdir" -test "x$prefix" = xNONE && prefix=$ac_default_prefix -test "x$exec_prefix" = xNONE && exec_prefix=$prefix -datarootdir=`eval echo "${datarootdir}"` -if test "x$CATOBJEXT" = "x.mo" ; then - localedir=`eval echo "${libdir}/locale"` -else - localedir=`eval echo "${datadir}/locale"` -fi -prefix="$glib_save_prefix" -exec_prefix="$glib_save_exec_prefix" -datarootdir="$glib_save_datarootdir" -AC_DEFINE_UNQUOTED($1, "$localedir", - [Define the location where the catalogs will be installed]) -]) - -dnl -dnl Now the definitions that aclocal will find -dnl -ifdef(glib_configure_ac,[],[ -AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)]) -AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)]) -])dnl - -# GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL]) -# -# Create a temporary file with TEST-FILE as its contents and pass the -# file name to PROGRAM. Perform ACTION-IF-PASS if PROGRAM exits with -# 0 and perform ACTION-IF-FAIL for any other exit status. -AC_DEFUN([GLIB_RUN_PROG], -[cat >conftest.foo <<_ACEOF -$2 -_ACEOF -if AC_RUN_LOG([$1 conftest.foo]); then - m4_ifval([$3], [$3], [:]) -m4_ifvaln([$4], [else $4])dnl -echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD -sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD -fi]) - - -dnl MATE_COMPILE_WARNINGS -dnl Turn on many useful compiler warnings -dnl For now, only works on GCC -AC_DEFUN([MATE_COMPILE_WARNINGS],[ - dnl ****************************** - dnl More compiler warnings - dnl ****************************** - - AC_ARG_ENABLE(compile-warnings, - AC_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@], - [Turn on compiler warnings]),, - [enable_compile_warnings="m4_default([$1],[yes])"]) - - warnCFLAGS= - if test "x$GCC" != xyes; then - enable_compile_warnings=no - fi - - warning_flags= - realsave_CFLAGS="$CFLAGS" - - case "$enable_compile_warnings" in - no) - warning_flags= - ;; - minimum) - warning_flags="-Wall" - ;; - yes) - warning_flags="-Wall -Wmissing-prototypes" - ;; - maximum|error) - warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith" - CFLAGS="$warning_flags $CFLAGS" - for option in -Wno-sign-compare; do - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $option" - AC_MSG_CHECKING([whether gcc understands $option]) - AC_TRY_COMPILE([], [], - has_option=yes, - has_option=no,) - CFLAGS="$SAVE_CFLAGS" - AC_MSG_RESULT($has_option) - if test $has_option = yes; then - warning_flags="$warning_flags $option" - fi - unset has_option - unset SAVE_CFLAGS - done - unset option - if test "$enable_compile_warnings" = "error" ; then - warning_flags="$warning_flags -Werror" - fi - ;; - *) - AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings) - ;; - esac - CFLAGS="$realsave_CFLAGS" - AC_MSG_CHECKING(what warning flags to pass to the C compiler) - AC_MSG_RESULT($warning_flags) - - AC_ARG_ENABLE(iso-c, - AC_HELP_STRING([--enable-iso-c], - [Try to warn if code is not ISO C ]),, - [enable_iso_c=no]) - - AC_MSG_CHECKING(what language compliance flags to pass to the C compiler) - complCFLAGS= - if test "x$enable_iso_c" != "xno"; then - if test "x$GCC" = "xyes"; then - case " $CFLAGS " in - *[\ \ ]-ansi[\ \ ]*) ;; - *) complCFLAGS="$complCFLAGS -ansi" ;; - esac - case " $CFLAGS " in - *[\ \ ]-pedantic[\ \ ]*) ;; - *) complCFLAGS="$complCFLAGS -pedantic" ;; - esac - fi - fi - AC_MSG_RESULT($complCFLAGS) - - WARN_CFLAGS="$warning_flags $complCFLAGS" - AC_SUBST(WARN_CFLAGS) -]) - -dnl For C++, do basically the same thing. - -AC_DEFUN([MATE_CXX_WARNINGS],[ - AC_ARG_ENABLE(cxx-warnings, - AC_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@] - [Turn on compiler warnings.]),, - [enable_cxx_warnings="m4_default([$1],[minimum])"]) - - AC_MSG_CHECKING(what warning flags to pass to the C++ compiler) - warnCXXFLAGS= - if test "x$GXX" != xyes; then - enable_cxx_warnings=no - fi - if test "x$enable_cxx_warnings" != "xno"; then - if test "x$GXX" = "xyes"; then - case " $CXXFLAGS " in - *[\ \ ]-Wall[\ \ ]*) ;; - *) warnCXXFLAGS="-Wall -Wno-unused" ;; - esac - - ## -W is not all that useful. And it cannot be controlled - ## with individual -Wno-xxx flags, unlike -Wall - if test "x$enable_cxx_warnings" = "xyes"; then - warnCXXFLAGS="$warnCXXFLAGS -Wshadow -Woverloaded-virtual" - fi - fi - fi - AC_MSG_RESULT($warnCXXFLAGS) - - AC_ARG_ENABLE(iso-cxx, - AC_HELP_STRING([--enable-iso-cxx], - [Try to warn if code is not ISO C++ ]),, - [enable_iso_cxx=no]) - - AC_MSG_CHECKING(what language compliance flags to pass to the C++ compiler) - complCXXFLAGS= - if test "x$enable_iso_cxx" != "xno"; then - if test "x$GXX" = "xyes"; then - case " $CXXFLAGS " in - *[\ \ ]-ansi[\ \ ]*) ;; - *) complCXXFLAGS="$complCXXFLAGS -ansi" ;; - esac - - case " $CXXFLAGS " in - *[\ \ ]-pedantic[\ \ ]*) ;; - *) complCXXFLAGS="$complCXXFLAGS -pedantic" ;; - esac - fi - fi - AC_MSG_RESULT($complCXXFLAGS) - - WARN_CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS" - AC_SUBST(WARN_CXXFLAGS) -]) - -# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- -# -# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004. -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 5 lt~obsolete.m4 - -# These exist entirely to fool aclocal when bootstrapping libtool. -# -# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) -# which have later been changed to m4_define as they aren't part of the -# exported API, or moved to Autoconf or Automake where they belong. -# -# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN -# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us -# using a macro with the same name in our local m4/libtool.m4 it'll -# pull the old libtool.m4 in (it doesn't see our shiny new m4_define -# and doesn't know about Autoconf macros at all.) -# -# So we provide this file, which has a silly filename so it's always -# included after everything else. This provides aclocal with the -# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything -# because those macros already exist, or will be overwritten later. -# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. -# -# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. -# Yes, that means every name once taken will need to remain here until -# we give up compatibility with versions before 1.7, at which point -# we need to keep only those names which we still refer to. - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) - -m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) -m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) -m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) -m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) -m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) -m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) -m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) -m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) -m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) -m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) -m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) -m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) -m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) -m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) -m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) -m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) -m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) -m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) -m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) -m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) -m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) -m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) -m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) -m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) -m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) -m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) -m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) -m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) -m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) -m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) -m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) -m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) -m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) -m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) -m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) -m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) -m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) -m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) -m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) -m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) -m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) -m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) -m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) -m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) -m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) -m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) -m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) -m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) -m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) -m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) - -# nls.m4 serial 5 (gettext-0.18) -dnl Copyright (C) 1995-2003, 2005-2006, 2008-2010 Free Software Foundation, -dnl Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper <[email protected]>, 1995-2000. -dnl Bruno Haible <[email protected]>, 2000-2003. - -AC_PREREQ([2.50]) - -AC_DEFUN([AM_NLS], -[ - AC_MSG_CHECKING([whether NLS is requested]) - dnl Default is enabled NLS - AC_ARG_ENABLE([nls], - [ --disable-nls do not use Native Language Support], - USE_NLS=$enableval, USE_NLS=yes) - AC_MSG_RESULT([$USE_NLS]) - AC_SUBST([USE_NLS]) -]) - -# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -# serial 1 (pkg-config-0.24) -# -# Copyright © 2004 Scott James Remnant <[email protected]>. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# PKG_PROG_PKG_CONFIG([MIN-VERSION]) -# ---------------------------------- -AC_DEFUN([PKG_PROG_PKG_CONFIG], -[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) -m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) -AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) -AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) -AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=m4_default([$1], [0.9.0]) - AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - PKG_CONFIG="" - fi -fi[]dnl -])# PKG_PROG_PKG_CONFIG - -# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -# -# Check to see whether a particular set of modules exists. Similar -# to PKG_CHECK_MODULES(), but does not set variables or print errors. -# -# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -# only at the first occurence in configure.ac, so if the first place -# it's called might be skipped (such as if it is within an "if", you -# have to call PKG_CHECK_EXISTS manually -# -------------------------------------------------------------- -AC_DEFUN([PKG_CHECK_EXISTS], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -if test -n "$PKG_CONFIG" && \ - AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then - m4_default([$2], [:]) -m4_ifvaln([$3], [else - $3])dnl -fi]) - -# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) -# --------------------------------------------- -m4_define([_PKG_CONFIG], -[if test -n "$$1"; then - pkg_cv_[]$1="$$1" - elif test -n "$PKG_CONFIG"; then - PKG_CHECK_EXISTS([$3], - [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], - [pkg_failed=yes]) - else - pkg_failed=untried -fi[]dnl -])# _PKG_CONFIG - -# _PKG_SHORT_ERRORS_SUPPORTED -# ----------------------------- -AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi[]dnl -])# _PKG_SHORT_ERRORS_SUPPORTED - - -# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -# [ACTION-IF-NOT-FOUND]) -# -# -# Note that if there is a possibility the first call to -# PKG_CHECK_MODULES might not happen, you should be sure to include an -# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac -# -# -# -------------------------------------------------------------- -AC_DEFUN([PKG_CHECK_MODULES], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl -AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl - -pkg_failed=no -AC_MSG_CHECKING([for $1]) - -_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) -_PKG_CONFIG([$1][_LIBS], [libs], [$2]) - -m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS -and $1[]_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details.]) - -if test $pkg_failed = yes; then - AC_MSG_RESULT([no]) - _PKG_SHORT_ERRORS_SUPPORTED - if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` - else - $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD - - m4_default([$4], [AC_MSG_ERROR( -[Package requirements ($2) were not met: - -$$1_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -_PKG_TEXT]) - ]) -elif test $pkg_failed = untried; then - AC_MSG_RESULT([no]) - m4_default([$4], [AC_MSG_FAILURE( -[The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -_PKG_TEXT - -To get pkg-config, see <http://pkg-config.freedesktop.org/>.]) - ]) -else - $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS - $1[]_LIBS=$pkg_cv_[]$1[]_LIBS - AC_MSG_RESULT([yes]) - $3 -fi[]dnl -])# PKG_CHECK_MODULES - -# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -# (This private macro should not be called outside this file.) -AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.11' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.11.1], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) - -# _AM_AUTOCONF_VERSION(VERSION) -# ----------------------------- -# aclocal traces this macro to find the Autoconf version. -# This is a private macro too. Using m4_define simplifies -# the logic in aclocal, which can simply ignore this definition. -m4_define([_AM_AUTOCONF_VERSION], []) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.11.1])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 9 - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -m4_define([_AM_COND_VALUE_$1], [$2])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 10 - -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], UPC, [depcc="$UPC" am_compiler_list=], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - am__universal=false - m4_case([$1], [CC], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac], - [CXX], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac]) - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -#serial 5 - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[{ - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 16 - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.62])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AM_PROG_MKDIR_P])dnl -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES(OBJC)], - [define([AC_PROG_OBJC], - defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl -]) -_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl -dnl The `parallel-tests' driver may need to know about EXEEXT, so add the -dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro -dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. -AC_CONFIG_COMMANDS_PRE(dnl -[m4_provide_if([_AM_COMPILER_EXEEXT], - [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl -]) - -dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not -dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further -dnl mangled by Autoconf and run in a shell conditional statement. -m4_define([_AC_COMPILER_EXEEXT], -m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) - - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi -AC_SUBST(install_sh)]) - -# Copyright (C) 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 4 - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 6 - -# AM_PROG_CC_C_O -# -------------- -# Like AC_PROG_CC_C_O, but changed for automake. -AC_DEFUN([AM_PROG_CC_C_O], -[AC_REQUIRE([AC_PROG_CC_C_O])dnl -AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([compile])dnl -# FIXME: we rely on the cache variable name because -# there is no other way. -set dummy $CC -am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` -eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o -if test "$am_t" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -dnl Make sure AC_PROG_CC is never called again, or it will override our -dnl setting of CC. -m4_define([AC_PROG_CC], - [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) -]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 6 - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) -fi -]) - -# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_MKDIR_P -# --------------- -# Check for `mkdir -p'. -AC_DEFUN([AM_PROG_MKDIR_P], -[AC_PREREQ([2.60])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, -dnl while keeping a definition of mkdir_p for backward compatibility. -dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. -dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of -dnl Makefile.ins that do not define MKDIR_P, so we do our own -dnl adjustment using top_builddir (which is defined more often than -dnl MKDIR_P). -AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl -case $mkdir_p in - [[\\/$]]* | ?:[[\\/]]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac -]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 4 - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# ------------------------------ -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) - -# _AM_SET_OPTIONS(OPTIONS) -# ---------------------------------- -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 5 - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[[\\\"\#\$\&\'\`$am_lf]]*) - AC_MSG_ERROR([unsafe absolute working directory name]);; -esac -case $srcdir in - *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; -esac - -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT(yes)]) - -# Copyright (C) 2009 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 1 - -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Enable less verbose build rules; with the default set to DEFAULT -# (`yes' being less verbose, `no' or empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_ARG_ENABLE([silent-rules], -[ --enable-silent-rules less verbose build output (undo: `make V=1') - --disable-silent-rules verbose build output (undo: `make V=0')]) -case $enable_silent_rules in -yes) AM_DEFAULT_VERBOSITY=0;; -no) AM_DEFAULT_VERBOSITY=1;; -*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -]) - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Copyright (C) 2006, 2008 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# _AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -# This macro is traced by Automake. -AC_DEFUN([_AM_SUBST_NOTMAKE]) - -# AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Public sister of _AM_SUBST_NOTMAKE. -AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of `v7', `ustar', or `pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. -AM_MISSING_PROG([AMTAR], [tar]) -m4_if([$1], [v7], - [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], - [m4_case([$1], [ustar],, [pax],, - [m4_fatal([Unknown tar format])]) -AC_MSG_CHECKING([how to create a $1 tar archive]) -# Loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' -_am_tools=${am_cv_prog_tar_$1-$_am_tools} -# Do not fold the above two line into one, because Tru64 sh and -# Solaris sh will not grok spaces in the rhs of `-'. -for _am_tool in $_am_tools -do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; - do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar <conftest.tar]) - grep GrepMe conftest.dir/file >/dev/null 2>&1 && break - fi -done -rm -rf conftest.dir - -AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) -AC_MSG_RESULT([$am_cv_prog_tar_$1])]) -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - -m4_include([m4/mate-doc-utils.m4]) -m4_include([m4/intltool.m4]) -m4_include([m4/libtool.m4]) -m4_include([m4/ltoptions.m4]) -m4_include([m4/ltsugar.m4]) -m4_include([m4/ltversion.m4]) -m4_include([m4/lt~obsolete.m4]) diff --git a/applets/Makefile.in b/applets/Makefile.in deleted file mode 100644 index 6e6890c..0000000 --- a/applets/Makefile.in +++ /dev/null @@ -1,626 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = applets -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = brightness inhibit -all: all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign applets/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign applets/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ - install-am install-strip tags-recursive - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic clean-libtool \ - ctags ctags-recursive distclean distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/applets/brightness/Makefile.in b/applets/brightness/Makefile.in deleted file mode 100644 index 281ba50..0000000 --- a/applets/brightness/Makefile.in +++ /dev/null @@ -1,717 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -libexec_PROGRAMS = mate-brightness-applet$(EXEEXT) -subdir = applets/brightness -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(serverdir)" \ - "$(DESTDIR)$(uidir)" -PROGRAMS = $(libexec_PROGRAMS) -am_mate_brightness_applet_OBJECTS = brightness-applet.$(OBJEXT) \ - egg-dbus-monitor.$(OBJEXT) egg-debug.$(OBJEXT) \ - gpm-common.$(OBJEXT) -mate_brightness_applet_OBJECTS = $(am_mate_brightness_applet_OBJECTS) -am__DEPENDENCIES_1 = -mate_brightness_applet_DEPENDENCIES = $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) -AM_V_lt = $(am__v_lt_$(V)) -am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) -am__v_lt_0 = --silent -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_$(V)) -am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) -am__v_CC_0 = @echo " CC " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_$(V)) -am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) -am__v_CCLD_0 = @echo " CCLD " $@; -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -SOURCES = $(mate_brightness_applet_SOURCES) -DIST_SOURCES = $(mate_brightness_applet_SOURCES) -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -DATA = $(server_DATA) $(ui_DATA) -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -INCLUDES = \ - -I. -I$(srcdir) \ - $(GLIB_CFLAGS) \ - $(DBUS_CFLAGS) \ - $(MATE_CFLAGS) \ - $(PANEL_CFLAGS) \ - $(LIBMATENOTIFY_CFLAGS) \ - $(GTKUNIQUE_CFLAGS) \ - -DBINDIR=\"$(bindir)\" \ - -DMATELOCALEDIR=\""$(datadir)/locale"\" \ - -DDATADIR=\"$(datadir)\" \ - -DPREFIX=\""$(prefix)"\" \ - -DSYSCONFDIR=\""$(sysconfdir)"\" \ - -DLIBDIR=\""$(libdir)"\" \ - -DVERSION="\"$(VERSION)\"" \ - -DGPM_DATA=\"$(pkgdatadir)\" \ - -DEGG_LOG_FILE=\""~/mate-power-manager.log"\" \ - -DEGG_VERBOSE="\"GPM_VERBOSE\"" \ - -DEGG_LOGGING="\"GPM_LOGGING\"" \ - -DEGG_CONSOLE="\"GPM_CONSOLE\"" \ - -I$(top_srcdir)/libdbus-glib \ - $(NULL) - -mate_brightness_applet_SOURCES = \ - brightness-applet.c \ - egg-dbus-monitor.c \ - egg-dbus-monitor.h \ - egg-debug.c \ - egg-debug.h \ - gpm-common.c \ - gpm-common.h - -mate_brightness_applet_LDADD = \ - $(DBUS_LIBS) \ - $(MATE_LIBS) \ - $(PANEL_LIBS) - -serverdir = $(libdir)/matecomponent/servers -server_in_files = MATE_BrightnessApplet.server.in -server_DATA = $(server_in_files:.server.in=.server) -uidir = $(datadir)/mate-2.0/ui -ui_DATA = MATE_BrightnessApplet.xml -EXTRA_DIST = MATE_BrightnessApplet.server.in.in $(ui_DATA) -DISTCLEANFILES = \ - $(server_DATA) $(server_DATA).in - -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign applets/brightness/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign applets/brightness/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -install-libexecPROGRAMS: $(libexec_PROGRAMS) - @$(NORMAL_INSTALL) - test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" - @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ - for p in $$list; do echo "$$p $$p"; done | \ - sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p || test -f $$p1; \ - then echo "$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ - -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ - sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) files[d] = files[d] " " $$1; \ - else { print "f", $$3 "/" $$4, $$1; } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-libexecPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' `; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(libexecdir)" && rm -f $$files - -clean-libexecPROGRAMS: - @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list -mate-brightness-applet$(EXEEXT): $(mate_brightness_applet_OBJECTS) $(mate_brightness_applet_DEPENDENCIES) - @rm -f mate-brightness-applet$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(mate_brightness_applet_OBJECTS) $(mate_brightness_applet_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/brightness-applet.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egg-dbus-monitor.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egg-debug.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpm-common.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-serverDATA: $(server_DATA) - @$(NORMAL_INSTALL) - test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" - @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ - done - -uninstall-serverDATA: - @$(NORMAL_UNINSTALL) - @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(serverdir)" && rm -f $$files -install-uiDATA: $(ui_DATA) - @$(NORMAL_INSTALL) - test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" - @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ - done - -uninstall-uiDATA: - @$(NORMAL_UNINSTALL) - @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(uidir)" && rm -f $$files - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(PROGRAMS) $(DATA) -installdirs: - for dir in "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(serverdir)" "$(DESTDIR)$(uidir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libexecPROGRAMS clean-libtool \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-serverDATA install-uiDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: install-libexecPROGRAMS - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-libexecPROGRAMS uninstall-serverDATA \ - uninstall-uiDATA - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-libexecPROGRAMS clean-libtool ctags distclean \ - distclean-compile distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am \ - install-libexecPROGRAMS install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-serverDATA install-strip \ - install-uiDATA installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ - pdf pdf-am ps ps-am tags uninstall uninstall-am \ - uninstall-libexecPROGRAMS uninstall-serverDATA \ - uninstall-uiDATA - - -$(server_in_files): $(server_in_files:.server.in=.server.in.in) - sed -e "s|\@LIBEXECDIR\@|$(libexecdir)|" -e "s|\@VERSION\@|$(VERSION)|" $< > $@ - -@INTLTOOL_SERVER_RULE@ - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/applets/inhibit/Makefile.in b/applets/inhibit/Makefile.in deleted file mode 100644 index ecddf07..0000000 --- a/applets/inhibit/Makefile.in +++ /dev/null @@ -1,717 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -libexec_PROGRAMS = mate-inhibit-applet$(EXEEXT) -subdir = applets/inhibit -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__installdirs = "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(serverdir)" \ - "$(DESTDIR)$(uidir)" -PROGRAMS = $(libexec_PROGRAMS) -am_mate_inhibit_applet_OBJECTS = inhibit-applet.$(OBJEXT) \ - egg-dbus-monitor.$(OBJEXT) egg-debug.$(OBJEXT) \ - gpm-common.$(OBJEXT) -mate_inhibit_applet_OBJECTS = $(am_mate_inhibit_applet_OBJECTS) -am__DEPENDENCIES_1 = -mate_inhibit_applet_DEPENDENCIES = $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) -AM_V_lt = $(am__v_lt_$(V)) -am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) -am__v_lt_0 = --silent -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_$(V)) -am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) -am__v_CC_0 = @echo " CC " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_$(V)) -am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) -am__v_CCLD_0 = @echo " CCLD " $@; -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -SOURCES = $(mate_inhibit_applet_SOURCES) -DIST_SOURCES = $(mate_inhibit_applet_SOURCES) -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -DATA = $(server_DATA) $(ui_DATA) -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -INCLUDES = \ - -I. -I$(srcdir) \ - $(GLIB_CFLAGS) \ - $(DBUS_CFLAGS) \ - $(MATE_CFLAGS) \ - $(PANEL_CFLAGS) \ - $(LIBMATENOTIFY_CFLAGS) \ - $(GTKUNIQUE_CFLAGS) \ - -DBINDIR=\"$(bindir)\" \ - -DMATELOCALEDIR=\""$(datadir)/locale"\" \ - -DDATADIR=\"$(datadir)\" \ - -DPREFIX=\""$(prefix)"\" \ - -DSYSCONFDIR=\""$(sysconfdir)"\" \ - -DLIBDIR=\""$(libdir)"\" \ - -DVERSION="\"$(VERSION)\"" \ - -DGPM_DATA=\"$(pkgdatadir)\" \ - -DEGG_LOG_FILE=\""~/mate-power-manager.log"\" \ - -DEGG_VERBOSE="\"GPM_VERBOSE\"" \ - -DEGG_LOGGING="\"GPM_LOGGING\"" \ - -DEGG_CONSOLE="\"GPM_CONSOLE\"" \ - -I$(top_srcdir)/libdbus-glib \ - $(NULL) - -mate_inhibit_applet_SOURCES = \ - inhibit-applet.c \ - egg-dbus-monitor.c \ - egg-dbus-monitor.h \ - egg-debug.c \ - egg-debug.h \ - gpm-common.c \ - gpm-common.h - -mate_inhibit_applet_LDADD = \ - $(DBUS_LIBS) \ - $(MATE_LIBS) \ - $(PANEL_LIBS) - -serverdir = $(libdir)/matecomponent/servers -server_in_files = MATE_InhibitApplet.server.in -server_DATA = $(server_in_files:.server.in=.server) -uidir = $(datadir)/mate-2.0/ui -ui_DATA = MATE_InhibitApplet.xml -EXTRA_DIST = MATE_InhibitApplet.server.in.in $(ui_DATA) -DISTCLEANFILES = \ - $(server_DATA) $(server_DATA).in - -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign applets/inhibit/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign applets/inhibit/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -install-libexecPROGRAMS: $(libexec_PROGRAMS) - @$(NORMAL_INSTALL) - test -z "$(libexecdir)" || $(MKDIR_P) "$(DESTDIR)$(libexecdir)" - @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ - for p in $$list; do echo "$$p $$p"; done | \ - sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p || test -f $$p1; \ - then echo "$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ - -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ - sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) files[d] = files[d] " " $$1; \ - else { print "f", $$3 "/" $$4, $$1; } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-libexecPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' `; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(libexecdir)" && rm -f $$files - -clean-libexecPROGRAMS: - @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list -mate-inhibit-applet$(EXEEXT): $(mate_inhibit_applet_OBJECTS) $(mate_inhibit_applet_DEPENDENCIES) - @rm -f mate-inhibit-applet$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(mate_inhibit_applet_OBJECTS) $(mate_inhibit_applet_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egg-dbus-monitor.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egg-debug.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpm-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/inhibit-applet.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-serverDATA: $(server_DATA) - @$(NORMAL_INSTALL) - test -z "$(serverdir)" || $(MKDIR_P) "$(DESTDIR)$(serverdir)" - @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(serverdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(serverdir)" || exit $$?; \ - done - -uninstall-serverDATA: - @$(NORMAL_UNINSTALL) - @list='$(server_DATA)'; test -n "$(serverdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(serverdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(serverdir)" && rm -f $$files -install-uiDATA: $(ui_DATA) - @$(NORMAL_INSTALL) - test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)" - @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \ - done - -uninstall-uiDATA: - @$(NORMAL_UNINSTALL) - @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(uidir)" && rm -f $$files - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(PROGRAMS) $(DATA) -installdirs: - for dir in "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(serverdir)" "$(DESTDIR)$(uidir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libexecPROGRAMS clean-libtool \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-serverDATA install-uiDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: install-libexecPROGRAMS - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-libexecPROGRAMS uninstall-serverDATA \ - uninstall-uiDATA - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-libexecPROGRAMS clean-libtool ctags distclean \ - distclean-compile distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am \ - install-libexecPROGRAMS install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-serverDATA install-strip \ - install-uiDATA installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ - pdf pdf-am ps ps-am tags uninstall uninstall-am \ - uninstall-libexecPROGRAMS uninstall-serverDATA \ - uninstall-uiDATA - - -$(server_in_files): $(server_in_files:.server.in=.server.in.in) - sed -e "s|\@LIBEXECDIR\@|$(libexecdir)|" -e "s|\@VERSION\@|$(VERSION)|" $< > $@ - -@INTLTOOL_SERVER_RULE@ - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/config.guess b/config.guess deleted file mode 100755 index da83314..0000000 --- a/config.guess +++ /dev/null @@ -1,1561 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 -# Free Software Foundation, Inc. - -timestamp='2009-04-27' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Originally written by Per Bothner <[email protected]>. -# Please send patches to <[email protected]>. Submit a context -# diff and a properly formatted ChangeLog entry. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# The plan is that this can be called by configure scripts if you -# don't specify an explicit build system type. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to <[email protected]>." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; set_cc_for_build= ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# ([email protected] 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep __ELF__ >/dev/null - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in - Debian*) - release='-gnu' - ;; - *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} - exit ;; - *:ekkoBSD:*:*) - echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit ;; - *:SolidBSD:*:*) - echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd${UNAME_RELEASE} - exit ;; - *:MirBSD:*:*) - echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE="alpha" ;; - "EV4.5 (21064)") - UNAME_MACHINE="alpha" ;; - "LCA4 (21066/21068)") - UNAME_MACHINE="alpha" ;; - "EV5 (21164)") - UNAME_MACHINE="alphaev5" ;; - "EV5.6 (21164A)") - UNAME_MACHINE="alphaev56" ;; - "EV5.6 (21164PC)") - UNAME_MACHINE="alphapca56" ;; - "EV5.7 (21164PC)") - UNAME_MACHINE="alphapca57" ;; - "EV6 (21264)") - UNAME_MACHINE="alphaev6" ;; - "EV6.7 (21264A)") - UNAME_MACHINE="alphaev67" ;; - "EV6.8CB (21264C)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8AL (21264B)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8CX (21264D)") - UNAME_MACHINE="alphaev68" ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE="alphaev69" ;; - "EV7 (21364)") - UNAME_MACHINE="alphaev7" ;; - "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit ;; - arm:riscos:*:*|arm:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # [email protected] (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - s390x:SunOS:*:*) - echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - eval $set_cc_for_build - SUN_ARCH="i386" - # If there is a compiler, see if it is configured for 64-bit objects. - # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. - # This test works for both compilers. - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then - if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - SUN_ARCH="x86_64" - fi - fi - echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten${UNAME_RELEASE} - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include <stdio.h> /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && - dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`$dummy $dummyarg` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <sys/systemcfg.h> - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[456]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include <stdlib.h> - #include <unistd.h> - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ ${HP_ARCH} = "hppa2.0w" ] - then - eval $set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | - grep __LP64__ >/dev/null - then - HP_ARCH="hppa2.0w" - else - HP_ARCH="hppa64" - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <unistd.h> - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:FreeBSD:*:*) - case ${UNAME_MACHINE} in - pc98) - echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - amd64) - echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - *) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - esac - exit ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit ;; - *:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit ;; - i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 - exit ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit ;; - *:Interix*:[3456]*) - case ${UNAME_MACHINE} in - x86) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; - EM64T | authenticamd | genuineintel) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; - IA64) - echo ia64-unknown-interix${UNAME_RELEASE} - exit ;; - esac ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - *:GNU:*:*) - # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu - exit ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit ;; - arm*:Linux:*:*) - eval $set_cc_for_build - if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_EABI__ - then - echo ${UNAME_MACHINE}-unknown-linux-gnu - else - echo ${UNAME_MACHINE}-unknown-linux-gnueabi - fi - exit ;; - avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - cris:Linux:*:*) - echo cris-axis-linux-gnu - exit ;; - crisv32:Linux:*:*) - echo crisv32-axis-linux-gnu - exit ;; - frv:Linux:*:*) - echo frv-unknown-linux-gnu - exit ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - mips:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips - #undef mipsel - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mipsel - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^CPU/{ - s: ::g - p - }'`" - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips64 - #undef mips64el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mips64el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips64 - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^CPU/{ - s: ::g - p - }'`" - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - or32:Linux:*:*) - echo or32-unknown-linux-gnu - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit ;; - padre:Linux:*:*) - echo sparc-unknown-linux-gnu - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-gnu ;; - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux - exit ;; - sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - vax:Linux:*:*) - echo ${UNAME_MACHINE}-dec-linux-gnu - exit ;; - x86_64:Linux:*:*) - echo x86_64-unknown-linux-gnu - exit ;; - xtensa*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - i*86:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - # Set LC_ALL=C to ensure ld outputs messages in English. - ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ - | sed -ne '/supported targets:/!d - s/[ ][ ]*/ /g - s/.*supported targets: *// - s/ .*// - p'` - case "$ld_supported_targets" in - elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" - ;; - a.out-i386-linux) - echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit ;; - "") - # Either a pre-BFD a.out linker (linux-gnuoldld) or - # one that does not give us useful --help. - echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit ;; - esac - # Determine whether the default compiler is a.out or elf - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <features.h> - #ifdef __ELF__ - # ifdef __GLIBC__ - # if __GLIBC__ >= 2 - LIBC=gnu - # else - LIBC=gnulibc1 - # endif - # else - LIBC=gnulibc1 - # endif - #else - #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) - LIBC=gnu - #else - LIBC=gnuaout - #endif - #endif - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^LIBC/{ - s: ::g - p - }'`" - test x"${LIBC}" != x && { - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" - exit - } - test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } - ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo ${UNAME_MACHINE}-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` - echo ${UNAME_MACHINE}-pc-isc$UNAME_REL - elif /bin/uname -X 2>/dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i586. - # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configury will decide that - # this is a cross-build. - echo i586-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - NCR*:*:4.2:* | MPRAS*:*:4.2:*) - OS_REL='.3' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says <[email protected]> - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes <[email protected]>. - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From [email protected]. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From [email protected]. - echo ${UNAME_MACHINE}-stratus-vos - exit ;; - *:VOS:*:*) - # From [email protected]. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - BePC:Haiku:*:*) # Haiku running on Intel PC compatible. - echo i586-pc-haiku - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux${UNAME_RELEASE} - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux${UNAME_RELEASE} - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux${UNAME_RELEASE} - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - case $UNAME_PROCESSOR in - unknown) UNAME_PROCESSOR=powerpc ;; - esac - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NSE-?:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk${UNAME_RELEASE} - exit ;; - NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = "386"; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} - exit ;; - *:DragonFly:*:*) - echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' - exit ;; - i*86:rdos:*:*) - echo ${UNAME_MACHINE}-pc-rdos - exit ;; - i*86:AROS:*:*) - echo ${UNAME_MACHINE}-pc-aros - exit ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -eval $set_cc_for_build -cat >$dummy.c <<EOF -#ifdef _SEQUENT_ -# include <sys/types.h> -# include <sys/utsname.h> -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include <sys/param.h> - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix\n"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -# if !defined (ultrix) -# include <sys/param.h> -# if defined (BSD) -# if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -# else -# if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# endif -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# else - printf ("vax-dec-ultrix\n"); exit (0); -# endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - c34*) - echo c34-convex-bsd - exit ;; - c38*) - echo c38-convex-bsd - exit ;; - c4*) - echo c4-convex-bsd - exit ;; - esac -fi - -cat >&2 <<EOF -$0: unable to guess system type - -This script, last modified $timestamp, has failed to recognize -the operating system you are using. It is advised that you -download the most up to date version of the config scripts from - - http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD -and - http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD - -If the version you run ($0) is already up to date, please -send the following data and any information you think might be -pertinent to <[email protected]> in order to provide the needed -information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/config.h.in b/config.h.in deleted file mode 100644 index 71166da..0000000 --- a/config.h.in +++ /dev/null @@ -1,110 +0,0 @@ -/* config.h.in. Generated from configure.ac by autoheader. */ - -/* always defined to indicate that i18n is enabled */ -#undef ENABLE_NLS - -/* foo */ -#undef GETTEXT_PACKAGE - -/* Define if we are building applets */ -#undef HAVE_APPLETS - -/* Define to 1 if you have the `bind_textdomain_codeset' function. */ -#undef HAVE_BIND_TEXTDOMAIN_CODESET - -/* Define to 1 if you have the `dcgettext' function. */ -#undef HAVE_DCGETTEXT - -/* Define to 1 if you have the <dlfcn.h> header file. */ -#undef HAVE_DLFCN_H - -/* Define if the GNU gettext() function is already present or preinstalled. */ -#undef HAVE_GETTEXT - -/* Define to 1 if you have the <inttypes.h> header file. */ -#undef HAVE_INTTYPES_H - -/* Define if Solaris kstat is support */ -#undef HAVE_KSTAT - -/* Define if your <locale.h> file defines LC_MESSAGES. */ -#undef HAVE_LC_MESSAGES - -/* Define to 1 if you have the <locale.h> header file. */ -#undef HAVE_LOCALE_H - -/* Define if have mateconf defaults */ -#undef HAVE_MATECONF_DEFAULTS - -/* Define to 1 if you have the <memory.h> header file. */ -#undef HAVE_MEMORY_H - -/* Define to 1 if you have the <stdint.h> header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the <stdlib.h> header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the <strings.h> header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the <string.h> header file. */ -#undef HAVE_STRING_H - -/* Define to 1 if you have the <sys/stat.h> header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the <sys/types.h> header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define if we want to use the self tests */ -#undef HAVE_TESTS - -/* Define to 1 if you have the <unistd.h> header file. */ -#undef HAVE_UNISTD_H - -/* Define if XF86XK_Battery is available */ -#undef HAVE_XF86XK_BATTERY - -/* Define if XF86XK_Hibernate is available */ -#undef HAVE_XF86XK_HIBERNATE - -/* Define if XF86XK_Suspend is available */ -#undef HAVE_XF86XK_SUSPEND - -/* xrandr 1.3 available */ -#undef HAVE_XRANDR_13 - -/* Define to the sub-directory in which libtool stores uninstalled libraries. - */ -#undef LT_OBJDIR - -/* Define to 1 if your C compiler doesn't accept -c and -o together. */ -#undef NO_MINUS_C_MINUS_O - -/* Name of package */ -#undef PACKAGE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Version number of package */ -#undef VERSION diff --git a/config.sub b/config.sub deleted file mode 100755 index a39437d..0000000 --- a/config.sub +++ /dev/null @@ -1,1686 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 -# Free Software Foundation, Inc. - -timestamp='2009-04-17' - -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Please send patches to <[email protected]>. Submit a context -# diff and a properly formatted ChangeLog entry. -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to <[email protected]>." - -version="\ -GNU config.sub ($timestamp) - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ - uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ - kopensolaris*-gnu* | \ - storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray) - os= - basic_machine=$1 - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco6) - os=-sco5v6 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | am33_2.0 \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ - | bfin \ - | c4x | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | fido | fr30 | frv \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | i370 | i860 | i960 | ia64 \ - | ip2k | iq2000 \ - | lm32 \ - | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | mcore | mep | metag \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64octeon | mips64octeonel \ - | mips64orion | mips64orionel \ - | mips64r5900 | mips64r5900el \ - | mips64vr | mips64vrel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mips64vr5900 | mips64vr5900el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | moxie \ - | mt \ - | msp430 \ - | nios | nios2 \ - | ns16k | ns32k \ - | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ - | pyramid \ - | score \ - | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | spu | strongarm \ - | tahoe | thumb | tic4x | tic80 | tron \ - | v850 | v850e \ - | we32k \ - | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ - | z8k | z80) - basic_machine=$basic_machine-unknown - ;; - m6811 | m68hc11 | m6812 | m68hc12) - # Motorola 68HC11/12. - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - ms1) - basic_machine=mt-unknown - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* | avr32-* \ - | bfin-* | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ - | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ - | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* | iq2000-* \ - | lm32-* \ - | m32c-* | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64octeon-* | mips64octeonel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64r5900-* | mips64r5900el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mips64vr5900-* | mips64vr5900el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | mt-* \ - | msp430-* \ - | nios-* | nios2-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ - | pyramid-* \ - | romp-* | rs6000-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ - | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ - | tahoe-* | thumb-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \ - | tron-* \ - | v850-* | v850e-* | vax-* \ - | we32k-* \ - | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ - | xstormy16-* | xtensa*-* \ - | ymp-* \ - | z8k-* | z80-*) - ;; - # Recognize the basic CPU types without company name, with glob match. - xtensa*) - basic_machine=$basic_machine-unknown - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - abacus) - basic_machine=abacus-unknown - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amd64) - basic_machine=x86_64-pc - ;; - amd64-*) - basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aros) - basic_machine=i386-pc - os=-aros - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - blackfin) - basic_machine=bfin-unknown - os=-linux - ;; - blackfin-*) - basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - cegcc) - basic_machine=arm-unknown - os=-cegcc - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; - cr16) - basic_machine=cr16-unknown - os=-elf - ;; - crds | unos) - basic_machine=m68k-crds - ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - crx) - basic_machine=crx-unknown - os=-elf - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dicos) - basic_machine=i686-pc - os=-dicos - ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m68knommu) - basic_machine=m68k-unknown - os=-linux - ;; - m68knommu-*) - basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - mingw32) - basic_machine=i386-pc - os=-mingw32 - ;; - mingw32ce) - basic_machine=arm-unknown - os=-mingw32ce - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - ms1-*) - basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - openrisc | openrisc-*) - basic_machine=or32-unknown - ;; - os400) - basic_machine=powerpc-ibm - os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - parisc) - basic_machine=hppa-unknown - os=-linux - ;; - parisc-*) - basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pc98) - basic_machine=i386-pc - ;; - pc98-*) - basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2 | pentiumiii | pentium3) - basic_machine=i686-pc - ;; - pentium4) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium4-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc) basic_machine=powerpc-unknown - ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rdos) - basic_machine=i386-pc - os=-rdos - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sde) - basic_machine=mipsisa32-sde - os=-elf - ;; - sei) - basic_machine=mips-sei - os=-seiux - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sh5el) - basic_machine=sh5le-unknown - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tic54x | c54x*) - basic_machine=tic54x-unknown - os=-coff - ;; - tic55x | c55x*) - basic_machine=tic55x-unknown - os=-coff - ;; - tic6x | c6x*) - basic_machine=tic6x-unknown - os=-coff - ;; - tile*) - basic_machine=tile-unknown - os=-linux-gnu - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - tpf) - basic_machine=s390x-ibm - os=-tpf - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - z80-*-coff) - basic_machine=z80-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - mmix) - basic_machine=mmix-knuth - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; - sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ - | -kopensolaris* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* | -aros* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ - | -openbsd* | -solidbsd* \ - | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ - | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* | -cegcc* \ - | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ - | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux-dietlibc) - os=-linux-dietlibc - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -os400*) - os=-os400 - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -syllable*) - os=-syllable - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -tpf*) - os=-tpf - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -aros*) - os=-aros - ;; - -kaos*) - os=-kaos - ;; - -zvmoe) - os=-zvmoe - ;; - -dicos*) - os=-dicos - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - score-*) - os=-elf - ;; - spu-*) - os=-elf - ;; - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - c4x-* | tic4x-*) - os=-coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - m68*-cisco) - os=-aout - ;; - mep-*) - os=-elf - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-haiku) - os=-haiku - ;; - *-ibm) - os=-aix - ;; - *-knuth) - os=-mmixware - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -os400*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -tpf*) - vendor=ibm - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/configure b/configure deleted file mode 100755 index 6c9a9da..0000000 --- a/configure +++ /dev/null @@ -1,16667 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.68 for mate-power-manager 2.32.0. -# -# -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software -# Foundation, Inc. -# -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - # We cannot yet assume a decent shell, so we have to provide a - # neutralization value for shells without unset; and this also - # works around shells that cannot unset nonexistent variables. - # Preserve -v and -x to the replacement shell. - BASH_ENV=/dev/null - ENV=/dev/null - (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV - export CONFIG_SHELL - case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; - esac - exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell [email protected] about your system, -$0: including any error possibly output before this -$0: message. Then install a modern shell, or manually run -$0: the script under such a shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$lt_ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; -esac - -ECHO=${lt_ECHO-echo} -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then - # Yippee, $ECHO works! - : -else - # Restart under the correct shell. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<_LT_EOF -$* -_LT_EOF - exit 0 -fi - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test -z "$lt_ECHO"; then - if test "X${echo_test_string+set}" != Xset; then - # find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if { echo_test_string=`eval $cmd`; } 2>/dev/null && - { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null - then - break - fi - done - fi - - if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : - else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - ECHO="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$ECHO" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - ECHO='print -r' - elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - ECHO='printf %s\n' - if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - ECHO="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - ECHO="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - ECHO=echo - fi - fi - fi - fi - fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -lt_ECHO=$ECHO -if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -fi - - - - -test -n "$DJDIR" || exec 7<&0 </dev/null -exec 6>&1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='mate-power-manager' -PACKAGE_TARNAME='mate-power-manager' -PACKAGE_VERSION='2.32.0' -PACKAGE_STRING='mate-power-manager 2.32.0' -PACKAGE_BUGREPORT='' -PACKAGE_URL='' - -ac_unique_file="src" -# Factoring default headers for most tests. -ac_includes_default="\ -#include <stdio.h> -#ifdef HAVE_SYS_TYPES_H -# include <sys/types.h> -#endif -#ifdef HAVE_SYS_STAT_H -# include <sys/stat.h> -#endif -#ifdef STDC_HEADERS -# include <stdlib.h> -# include <stddef.h> -#else -# ifdef HAVE_STDLIB_H -# include <stdlib.h> -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include <memory.h> -# endif -# include <string.h> -#endif -#ifdef HAVE_STRINGS_H -# include <strings.h> -#endif -#ifdef HAVE_INTTYPES_H -# include <inttypes.h> -#endif -#ifdef HAVE_STDINT_H -# include <stdint.h> -#endif -#ifdef HAVE_UNISTD_H -# include <unistd.h> -#endif" - -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -LIBOBJS -HAVE_DOCBOOK2MAN_FALSE -HAVE_DOCBOOK2MAN_TRUE -DOCBOOK2MAN -GPM_EXTRA_LIBS -DBUS_SERVICES_DIR -DOCBOOK_DOCS_ENABLED_FALSE -DOCBOOK_DOCS_ENABLED_TRUE -XMLTO -HAVE_APPLETS_FALSE -HAVE_APPLETS_TRUE -PANEL_LIBS -PANEL_CFLAGS -HAVE_MATECONF_DEFAULTS_FALSE -HAVE_MATECONF_DEFAULTS_TRUE -HAVE_TESTS_FALSE -HAVE_TESTS_TRUE -DOCDIR -SBINDIR -BINDIR -DATADIR -SYSCONFDIR -MATECONF_SCHEMAS_INSTALL_FALSE -MATECONF_SCHEMAS_INSTALL_TRUE -MATECONF_SCHEMA_FILE_DIR -MATECONF_SCHEMA_CONFIG_SOURCE -MATECONFTOOL -UPOWER_LIBS -UPOWER_CFLAGS -UNIQUE_LIBS -UNIQUE_CFLAGS -LIBMATENOTIFY_LIBS -LIBMATENOTIFY_CFLAGS -X11_LIBS -X11_CFLAGS -GDK_LIBS -GDK_CFLAGS -MATE_LIBS -MATE_CFLAGS -DBUS_LIBS -DBUS_CFLAGS -CANBERRA_LIBS -CANBERRA_CFLAGS -GLIB_LIBS -GLIB_CFLAGS -MKINSTALLDIRS -POSUB -POFILES -PO_IN_DATADIR_FALSE -PO_IN_DATADIR_TRUE -INTLLIBS -INSTOBJEXT -GMOFILES -CATOBJEXT -CATALOGS -MSGFMT_OPTS -GETTEXT_PACKAGE -WARNINGFLAGS -GLIB_GENMARSHAL -HAVE_MATE_DOC_UTILS_FALSE -HAVE_MATE_DOC_UTILS_TRUE -DISTCHECK_CONFIGURE_FLAGS -ENABLE_SK_FALSE -ENABLE_SK_TRUE -DOC_USER_FORMATS -OMF_DIR -HELP_DIR -PKG_CONFIG_LIBDIR -PKG_CONFIG_PATH -PKG_CONFIG -WARN_CFLAGS -DATADIRNAME -ALL_LINGUAS -INTLTOOL_PERL -GMSGFMT -MSGFMT -MSGMERGE -XGETTEXT -INTLTOOL_POLICY_RULE -INTLTOOL_SERVICE_RULE -INTLTOOL_THEME_RULE -INTLTOOL_SCHEMAS_RULE -INTLTOOL_CAVES_RULE -INTLTOOL_XML_NOMERGE_RULE -INTLTOOL_XML_RULE -INTLTOOL_KBD_RULE -INTLTOOL_XAM_RULE -INTLTOOL_UI_RULE -INTLTOOL_SOUNDLIST_RULE -INTLTOOL_SHEET_RULE -INTLTOOL_SERVER_RULE -INTLTOOL_PONG_RULE -INTLTOOL_OAF_RULE -INTLTOOL_PROP_RULE -INTLTOOL_KEYS_RULE -INTLTOOL_DIRECTORY_RULE -INTLTOOL_DESKTOP_RULE -INTLTOOL_EXTRACT -INTLTOOL_MERGE -INTLTOOL_UPDATE -USE_NLS -CPP -OTOOL64 -OTOOL -LIPO -NMEDIT -DSYMUTIL -lt_ECHO -RANLIB -AR -OBJDUMP -LN_S -NM -ac_ct_DUMPBIN -DUMPBIN -LD -FGREP -EGREP -GREP -SED -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -LIBTOOL -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__quote -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -AM_BACKSLASH -AM_DEFAULT_VERBOSITY -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_silent_rules -enable_dependency_tracking -enable_shared -enable_static -with_pic -enable_fast_install -with_gnu_ld -enable_libtool_lock -enable_nls -enable_compile_warnings -enable_iso_c -with_help_dir -with_omf_dir -with_help_formats -enable_scrollkeeper -enable_strict -with_mateconf_source -with_mateconf_schema_file_dir -enable_schemas_install -with_doc_dir -enable_tests -enable_mateconf_defaults -enable_applets -enable_docbook_docs -with_dbus_services -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CPP -PKG_CONFIG -PKG_CONFIG_PATH -PKG_CONFIG_LIBDIR -GLIB_CFLAGS -GLIB_LIBS -CANBERRA_CFLAGS -CANBERRA_LIBS -DBUS_CFLAGS -DBUS_LIBS -MATE_CFLAGS -MATE_LIBS -GDK_CFLAGS -GDK_LIBS -X11_CFLAGS -X11_LIBS -LIBMATENOTIFY_CFLAGS -LIBMATENOTIFY_LIBS -UNIQUE_CFLAGS -UNIQUE_LIBS -UPOWER_CFLAGS -UPOWER_LIBS -PANEL_CFLAGS -PANEL_LIBS' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used" >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures mate-power-manager 2.32.0 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root - [DATAROOTDIR/doc/mate-power-manager] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of mate-power-manager 2.32.0:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-silent-rules less verbose build output (undo: `make V=1') - --disable-silent-rules verbose build output (undo: `make V=0') - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors - --enable-shared[=PKGS] build shared libraries [default=yes] - --enable-static[=PKGS] build static libraries [default=yes] - --enable-fast-install[=PKGS] - optimize for fast installation [default=yes] - --disable-libtool-lock avoid locking (might break parallel builds) - --disable-nls do not use Native Language Support - --enable-compile-warnings=[no/minimum/yes/maximum/error] - Turn on compiler warnings - --enable-iso-c Try to warn if code is not ISO C - --disable-scrollkeeper do not make updates to the scrollkeeper database - --enable-strict Enable strict compilation options - --disable-schemas-install - Disable the schemas installation - --enable-tests Build self tests - --disable-mateconf-defaults - Allow setting mateconf default settings - --disable-applets Build the extra power applets - --enable-docbook-docs build documentation (requires xmlto) - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-pic try to use only PIC/non-PIC objects [default=use - both] - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-help-dir=DIR path to help docs - --with-omf-dir=DIR path to OMF files - --with-help-formats=FORMATS - list of formats - --with-mateconf-source=sourceaddress - Config database for installing schema files. - --with-mateconf-schema-file-dir=dir - Directory for installing schema files. - --with-doc-dir=<dir> directory to install documentation - --with-dbus-services=<dir> - where D-BUS services directory is - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a - nonstandard directory <lib dir> - LIBS libraries to pass to the linker, e.g. -l<library> - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if - you have headers in a nonstandard directory <include dir> - CPP C preprocessor - PKG_CONFIG path to pkg-config utility - PKG_CONFIG_PATH - directories to add to pkg-config's search path - PKG_CONFIG_LIBDIR - path overriding pkg-config's built-in search path - GLIB_CFLAGS C compiler flags for GLIB, overriding pkg-config - GLIB_LIBS linker flags for GLIB, overriding pkg-config - CANBERRA_CFLAGS - C compiler flags for CANBERRA, overriding pkg-config - CANBERRA_LIBS - linker flags for CANBERRA, overriding pkg-config - DBUS_CFLAGS C compiler flags for DBUS, overriding pkg-config - DBUS_LIBS linker flags for DBUS, overriding pkg-config - MATE_CFLAGS C compiler flags for MATE, overriding pkg-config - MATE_LIBS linker flags for MATE, overriding pkg-config - GDK_CFLAGS C compiler flags for GDK, overriding pkg-config - GDK_LIBS linker flags for GDK, overriding pkg-config - X11_CFLAGS C compiler flags for X11, overriding pkg-config - X11_LIBS linker flags for X11, overriding pkg-config - LIBMATENOTIFY_CFLAGS - C compiler flags for LIBMATENOTIFY, overriding pkg-config - LIBMATENOTIFY_LIBS - linker flags for LIBMATENOTIFY, overriding pkg-config - UNIQUE_CFLAGS - C compiler flags for UNIQUE, overriding pkg-config - UNIQUE_LIBS linker flags for UNIQUE, overriding pkg-config - UPOWER_CFLAGS - C compiler flags for UPOWER, overriding pkg-config - UPOWER_LIBS linker flags for UPOWER, overriding pkg-config - PANEL_CFLAGS - C compiler flags for PANEL, overriding pkg-config - PANEL_LIBS linker flags for PANEL, overriding pkg-config - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to the package provider. -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -mate-power-manager configure 2.32.0 -generated by GNU Autoconf 2.68 - -Copyright (C) 2010 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_link - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case <limits.h> declares $2. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func - -# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists, giving a warning if it cannot be compiled using -# the include files in INCLUDES and setting the cache variable VAR -# accordingly. -ac_fn_c_check_header_mongrel () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if eval \${$3+:} false; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -$as_echo_n "checking $2 usability... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_header_compiler=yes -else - ac_header_compiler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -$as_echo_n "checking $2 presence... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <$2> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - ac_header_preproc=yes -else - ac_header_preproc=no -fi -rm -f conftest.err conftest.i conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( - yes:no: ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; - no:yes:* ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; -esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=\$ac_header_compiler" -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_mongrel -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by mate-power-manager $as_me 2.32.0, which was -generated by GNU Autoconf 2.68. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -am__api_version='1.11' - -ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Just in case -sleep 1 -echo timestamp > conftest.file -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; -esac - -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken -alias in your environment" "$LINENO" 5 - fi - - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -fi - -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - -fi - - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } - -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE=mate-power-manager - VERSION=2.32.0 - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. - -AMTAR=${AMTAR-"${am_missing_run}tar"} - -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' - - - - - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='mate-power-manager' - VERSION='2.32.0' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. - -AMTAR=${AMTAR-"${am_missing_run}tar"} - -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' - - - - - -ac_config_headers="$ac_config_headers config.h" - - - -# enable nice build output on automake1.11 -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in -yes) AM_DEFAULT_VERBOSITY=0;; -no) AM_DEFAULT_VERBOSITY=1;; -*) AM_DEFAULT_VERBOSITY=0;; -esac -AM_BACKSLASH='\' - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <stdio.h> -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <stdarg.h> -#include <stdio.h> -#include <sys/types.h> -#include <sys/stat.h> -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - -if test "x$CC" != xcc; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5 -$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5 -$as_echo_n "checking whether cc understands -c and -o together... " >&6; } -fi -set dummy $CC; ac_cc=`$as_echo "$2" | - sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` -if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -# Make sure it works both with $CC and with simple cc. -# We do the test twice because some compilers refuse to overwrite an -# existing .o file with -o, though they will create one. -ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' -rm -f conftest2.* -if { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && - test -f conftest2.$ac_objext && { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; -then - eval ac_cv_prog_cc_${ac_cc}_c_o=yes - if test "x$CC" != xcc; then - # Test first that cc exists at all. - if { ac_try='cc -c conftest.$ac_ext >&5' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' - rm -f conftest2.* - if { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && - test -f conftest2.$ac_objext && { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; - then - # cc works too. - : - else - # cc exists but doesn't like -o. - eval ac_cv_prog_cc_${ac_cc}_c_o=no - fi - fi - fi -else - eval ac_cv_prog_cc_${ac_cc}_c_o=no -fi -rm -f core conftest* - -fi -if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h - -fi - -# FIXME: we rely on the cache variable name because -# there is no other way. -set dummy $CC -am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` -eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o -if test "$am_t" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi - - - - -case `pwd` in - *\ * | *\ *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 -$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; -esac - - - -macro_version='2.2.6' -macro_revision='1.3012' - - - - - - - - - - - - - -ltmain="$ac_aux_dir/ltmain.sh" - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -$as_echo_n "checking for a sed that does not truncate output... " >&6; } -if ${ac_cv_path_SED+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} - if test -z "$SED"; then - ac_path_SED_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue -# Check for GNU ac_path_SED and select it if it is found. - # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in -*GNU*) - ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo '' >> "conftest.nl" - "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_SED_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_SED="$ac_path_SED" - ac_path_SED_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_SED_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 - fi -else - ac_cv_path_SED=$SED -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 -$as_echo "$ac_cv_path_SED" >&6; } - SED="$ac_cv_path_SED" - rm -f conftest.sed - -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 -$as_echo_n "checking for fgrep... " >&6; } -if ${ac_cv_path_FGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 - then ac_cv_path_FGREP="$GREP -F" - else - if test -z "$FGREP"; then - ac_path_FGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in fgrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue -# Check for GNU ac_path_FGREP and select it if it is found. - # Check for GNU $ac_path_FGREP -case `"$ac_path_FGREP" --version 2>&1` in -*GNU*) - ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'FGREP' >> "conftest.nl" - "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_FGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_FGREP="$ac_path_FGREP" - ac_path_FGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_FGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_FGREP"; then - as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_FGREP=$FGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 -$as_echo "$ac_cv_path_FGREP" >&6; } - FGREP="$ac_cv_path_FGREP" - - -test -z "$GREP" && GREP=grep - - - - - - - - - - - - - - - - - - - -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if ${lt_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in - *GNU* | *'with BFD'*) - test "$with_gnu_ld" != no && break - ;; - *) - test "$with_gnu_ld" != yes && break - ;; - esac - fi - done - IFS="$lt_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi -fi - -LD="$lt_cv_path_LD" -if test -n "$LD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${lt_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 </dev/null` in -*GNU* | *'with BFD'*) - lt_cv_prog_gnu_ld=yes - ;; -*) - lt_cv_prog_gnu_ld=no - ;; -esac -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 -$as_echo "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 -$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } -if ${lt_cv_path_NM+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - : ${lt_cv_path_NM=no} -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 -$as_echo "$lt_cv_path_NM" >&6; } -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$ac_tool_prefix"; then - for ac_prog in "dumpbin -symbols" "link -dump -symbols" - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DUMPBIN"; then - ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DUMPBIN=$ac_cv_prog_DUMPBIN -if test -n "$DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 -$as_echo "$DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$DUMPBIN" && break - done -fi -if test -z "$DUMPBIN"; then - ac_ct_DUMPBIN=$DUMPBIN - for ac_prog in "dumpbin -symbols" "link -dump -symbols" -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DUMPBIN"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN -if test -n "$ac_ct_DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 -$as_echo "$ac_ct_DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_DUMPBIN" && break -done - - if test "x$ac_ct_DUMPBIN" = x; then - DUMPBIN=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DUMPBIN=$ac_ct_DUMPBIN - fi -fi - - - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" - fi -fi -test -z "$NM" && NM=nm - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 -$as_echo_n "checking the name lister ($NM) interface... " >&6; } -if ${lt_cv_nm_interface+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:5008: $ac_compile\"" >&5) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&5 - (eval echo "\"\$as_me:5011: $NM \\\"conftest.$ac_objext\\\"\"" >&5) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&5 - (eval echo "\"\$as_me:5014: output\"" >&5) - cat conftest.out >&5 - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 -$as_echo "$lt_cv_nm_interface" >&6; } - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 -$as_echo_n "checking whether ln -s works... " >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 -$as_echo "no, using $LN_S" >&6; } -fi - -# find the maximum length of command line arguments -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 -$as_echo_n "checking the maximum length of command line arguments... " >&6; } -if ${lt_cv_sys_max_cmd_len+:} false; then : - $as_echo_n "(cached) " >&6 -else - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ - = "XX$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac - -fi - -if test -n $lt_cv_sys_max_cmd_len ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 -$as_echo "$lt_cv_sys_max_cmd_len" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 -$as_echo "none" >&6; } -fi -max_cmd_len=$lt_cv_sys_max_cmd_len - - - - - - -: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 -$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 -$as_echo "$xsi_shell" >&6; } - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 -$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } -lt_shell_append=no -( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 -$as_echo "$lt_shell_append" >&6; } - - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi - - - - - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 -$as_echo_n "checking for $LD option to reload object files... " >&6; } -if ${lt_cv_ld_reload_flag+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_reload_flag='-r' -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 -$as_echo "$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -$as_echo "$OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -$as_echo "$ac_ct_OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJDUMP=$ac_ct_OBJDUMP - fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" -fi - -test -z "$OBJDUMP" && OBJDUMP=objdump - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 -$as_echo_n "checking how to recognize dependent libraries... " >&6; } -if ${lt_cv_deplibs_check_method+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[4-9]*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[3-9]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 -$as_echo "$lt_cv_deplibs_check_method" >&6; } -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - - - - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -set dummy ${ac_tool_prefix}ar; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. -set dummy ar; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="ar" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_AR" = x; then - AR="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -else - AR="$ac_cv_prog_AR" -fi - -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru - - - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -test -z "$STRIP" && STRIP=: - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -test -z "$RANLIB" && RANLIB=: - - - - - - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 -$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if ${lt_cv_sys_global_symbol_pipe+:} false; then : - $as_echo_n "(cached) " >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[ABCDGISTW]' - ;; -hpux*) - if test "$host_cpu" = ia64; then - symcode='[ABCDEGRST]' - fi - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris*) - symcode='[BDRT]' - ;; -sco3.2v5*) - symcode='[DT]' - ;; -sysv4.2uw2*) - symcode='[DT]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[ABDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK '"\ -" {last_section=section; section=\$ 3};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5 - (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 -$as_echo "failed" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } -fi - - - - - - - - - - - - - - - - - - - - - - - -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then : - enableval=$enable_libtool_lock; -fi - -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 6220 "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 -$as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if ${lt_cv_cc_needs_belf+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_cc_needs_belf=yes -else - lt_cv_cc_needs_belf=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 -$as_echo "$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks="$enable_libtool_lock" - - - case $host_os in - rhapsody* | darwin*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 -$as_echo "$DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 -$as_echo "$ac_ct_DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DSYMUTIL=$ac_ct_DSYMUTIL - fi -else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 -$as_echo "$NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 -$as_echo "$ac_ct_NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - NMEDIT=$ac_ct_NMEDIT - fi -else - NMEDIT="$ac_cv_prog_NMEDIT" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. -set dummy ${ac_tool_prefix}lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$LIPO"; then - ac_cv_prog_LIPO="$LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -LIPO=$ac_cv_prog_LIPO -if test -n "$LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 -$as_echo "$LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_LIPO"; then - ac_ct_LIPO=$LIPO - # Extract the first word of "lipo", so it can be a program name with args. -set dummy lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_LIPO"; then - ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_LIPO="lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO -if test -n "$ac_ct_LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 -$as_echo "$ac_ct_LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_LIPO" = x; then - LIPO=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - LIPO=$ac_ct_LIPO - fi -else - LIPO="$ac_cv_prog_LIPO" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL"; then - ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL=$ac_cv_prog_OTOOL -if test -n "$OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 -$as_echo "$OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL"; then - ac_ct_OTOOL=$OTOOL - # Extract the first word of "otool", so it can be a program name with args. -set dummy otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL"; then - ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL="otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL -if test -n "$ac_ct_OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 -$as_echo "$ac_ct_OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL" = x; then - OTOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL=$ac_ct_OTOOL - fi -else - OTOOL="$ac_cv_prog_OTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL64"; then - ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL64=$ac_cv_prog_OTOOL64 -if test -n "$OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 -$as_echo "$OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL64"; then - ac_ct_OTOOL64=$OTOOL64 - # Extract the first word of "otool64", so it can be a program name with args. -set dummy otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL64"; then - ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL64="otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 -if test -n "$ac_ct_OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 -$as_echo "$ac_ct_OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL64" = x; then - OTOOL64=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL64=$ac_ct_OTOOL64 - fi -else - OTOOL64="$ac_cv_prog_OTOOL64" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 -$as_echo_n "checking for -single_module linker flag... " >&6; } -if ${lt_cv_apple_cc_single_mod+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&5 - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 -$as_echo "$lt_cv_apple_cc_single_mod" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 -$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -if ${lt_cv_ld_exported_symbols_list+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_ld_exported_symbols_list=yes -else - lt_cv_ld_exported_symbols_list=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 -$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - if test "$DSYMUTIL" != ":"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <stdlib.h> -#include <stdarg.h> -#include <string.h> -#include <float.h> - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <string.h> - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <stdlib.h> - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <ctype.h> -#include <stdlib.h> -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in dlfcn.h -do : - ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default -" -if test "x$ac_cv_header_dlfcn_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_DLFCN_H 1 -_ACEOF - -fi - -done - - - -# Set options - - - - enable_dlopen=no - - - enable_win32_dll=no - - - # Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then : - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_shared=yes -fi - - - - - - - - - - # Check whether --enable-static was given. -if test "${enable_static+set}" = set; then : - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_static=yes -fi - - - - - - - - - - -# Check whether --with-pic was given. -if test "${with_pic+set}" = set; then : - withval=$with_pic; pic_mode="$withval" -else - pic_mode=default -fi - - -test -z "$pic_mode" && pic_mode=default - - - - - - - - # Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then : - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_fast_install=yes -fi - - - - - - - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - - - - - - - - - - - - - - - - - - - - - - - - - -test -z "$LN_S" && LN_S="ln -s" - - - - - - - - - - - - - - -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 -$as_echo_n "checking for objdir... " >&6; } -if ${lt_cv_objdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 -$as_echo "$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir - - - - - -cat >>confdefs.h <<_ACEOF -#define LT_OBJDIR "$lt_cv_objdir/" -_ACEOF - - - - - - - - - - - - - - - - - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld="$lt_cv_prog_gnu_ld" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 -$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** [email protected] - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 -$as_echo_n "checking for file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** [email protected] - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -# Use C for the default configuration in the libtool script - -lt_save_CC="$CC" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -objext=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* - - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - -lt_prog_compiler_no_builtin_flag= - -if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag=' -fno-builtin' - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7749: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:7753: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : -fi - -fi - - - - - - - lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } - - if test "$GCC" = yes; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - linux* | k*bsd*-gnu) - case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. - ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='--shared' - lt_prog_compiler_static='--static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - xl*) - # IBM XL C 8.0/Fortran 10.1 on PPC - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-qpic' - lt_prog_compiler_static='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - esac - ;; - esac - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static='-non_shared' - ;; - - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi - -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 -$as_echo "$lt_prog_compiler_pic" >&6; } - - - - - - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if ${lt_cv_prog_compiler_pic_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:8088: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:8092: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } - -if test x"$lt_cv_prog_compiler_pic_works" = xyes; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi - -fi - - - - - - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 -$as_echo "$lt_cv_prog_compiler_static_works" >&6; } - -if test x"$lt_cv_prog_compiler_static_works" = xyes; then - : -else - lt_prog_compiler_static= -fi - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:8193: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:8197: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:8248: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:8252: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - - runpath_var= - allow_undefined_flag= - always_export_symbols=no - archive_cmds= - archive_expsym_cmds= - compiler_needs_object=no - enable_shared_with_static_runtimes=no - export_dynamic_flag_spec= - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - hardcode_automatic=no - hardcode_direct=no - hardcode_direct_absolute=no - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld= - hardcode_libdir_separator= - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - inherit_rpath=no - link_all_deplibs=unknown - module_cmds= - module_expsym_cmds= - old_archive_from_new_cmds= - old_archive_from_expsyms_cmds= - thread_safe_flag_spec= - whole_archive_flag_spec= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - ld_shlibs=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach <[email protected]> says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs=no - fi - ;; - - interix[3-9]*) - hardcode_direct=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then - tmp_addflag= - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - whole_archive_flag_spec= - tmp_sharedflag='--shared' ;; - xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - xlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld='-rpath $libdir' - archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - ld_shlibs=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = no; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds='' - hardcode_direct=yes - hardcode_direct_absolute=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - file_list_spec='${wl}-f,' - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - export_dynamic_flag_spec='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes=yes - ;; - - darwin* | rhapsody*) - - - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - whole_archive_flag_spec='' - link_all_deplibs=yes - allow_undefined_flag="$_lt_dar_allow_undefined" - case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=echo - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - - else - ld_shlibs=no - fi - - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9*) - if test "$GCC" = yes; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_flag_spec_ld='+b $libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - *) - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int foo(void) {} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - inherit_rpath=yes - link_all_deplibs=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - *nto* | *qnx*) - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - hardcode_shlibpath_var=no - hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - archive_cmds_need_lc='no' - hardcode_libdir_separator=: - ;; - - solaris*) - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='${wl}' - archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='${wl}-z,text' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag='${wl}-z,text' - allow_undefined_flag='${wl}-z,nodefs' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-R,$libdir' - hardcode_libdir_separator=':' - link_all_deplibs=yes - export_dynamic_flag_spec='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac - - if test x$host_vendor = xsni; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='${wl}-Blargedynsym' - ;; - esac - fi - fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 -$as_echo "$ld_shlibs" >&6; } -test "$ld_shlibs" = no && can_build_shared=no - -with_gnu_ld=$with_gnu_ld - - - - - - - - - - - - - - - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 - (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - archive_cmds_need_lc=no - else - archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5 -$as_echo "$archive_cmds_need_lc" >&6; } - ;; - esac - fi - ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } - -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` - else - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[lt_foo]++; } - if (lt_freq[lt_foo] == 1) { print lt_foo; } -}'` - sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[4-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib<name>.so - # instead of lib<name>.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -interix[3-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # Some binutils ld are patched to set DT_RUNPATH - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - shlibpath_overrides_runpath=yes -fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Add ABI-specific directories to the system library path. - sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib" - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || - test -n "$runpath_var" || - test "X$hardcode_automatic" = "Xyes" ; then - - # We can hardcode non-existent directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 -$as_echo "$hardcode_action" >&6; } - -if test "$hardcode_action" = relink || - test "$inherit_rpath" = yes; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - - - - - - - if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - -fi - - ;; - - *) - ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" -if test "x$ac_cv_func_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 -$as_echo_n "checking for shl_load in -ldld... " >&6; } -if ${ac_cv_lib_dld_shl_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_shl_load=yes -else - ac_cv_lib_dld_shl_load=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 -$as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" -else - ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" -if test "x$ac_cv_func_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 -$as_echo_n "checking for dlopen in -lsvld... " >&6; } -if ${ac_cv_lib_svld_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_svld_dlopen=yes -else - ac_cv_lib_svld_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 -$as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 -$as_echo_n "checking for dld_link in -ldld... " >&6; } -if ${ac_cv_lib_dld_dld_link+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (); -int -main () -{ -return dld_link (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_dld_link=yes -else - ac_cv_lib_dld_dld_link=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 -$as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = xyes; then : - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 -$as_echo_n "checking whether a program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line 10618 "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include <dlfcn.h> -#endif - -#include <stdio.h> - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 -$as_echo "$lt_cv_dlopen_self" >&6; } - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 -$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self_static+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line 10714 "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include <dlfcn.h> -#endif - -#include <stdio.h> - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 -$as_echo "$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - - - - - - - - - - - - - - - - -striplib= -old_striplib= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 -$as_echo_n "checking whether stripping libraries is possible... " >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - fi - ;; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - ;; - esac -fi - - - - - - - - - - - - - # Report which library types will actually be built - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } - - - - -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - - - - - - - - - - - - - ac_config_commands="$ac_config_commands libtool" - - - - -# Only expand once: - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 -$as_echo_n "checking whether NLS is requested... " >&6; } - # Check whether --enable-nls was given. -if test "${enable_nls+set}" = set; then : - enableval=$enable_nls; USE_NLS=$enableval -else - USE_NLS=yes -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 -$as_echo "$USE_NLS" >&6; } - - - - -case "$am__api_version" in - 1.01234) - as_fn_error $? "Automake 1.5 or newer is required to use intltool" "$LINENO" 5 - ;; - *) - ;; -esac - -if test -n "0.35.0"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for intltool >= 0.35.0" >&5 -$as_echo_n "checking for intltool >= 0.35.0... " >&6; } - - INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.35.0 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` - INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` - INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_APPLIED_VERSION found" >&5 -$as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } - test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || - as_fn_error $? "Your intltool is too old. You need intltool 0.35.0 or later." "$LINENO" 5 -fi - -# Extract the first word of "intltool-update", so it can be a program name with args. -set dummy intltool-update; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_UPDATE+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $INTLTOOL_UPDATE in - [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_UPDATE="$INTLTOOL_UPDATE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE -if test -n "$INTLTOOL_UPDATE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_UPDATE" >&5 -$as_echo "$INTLTOOL_UPDATE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -# Extract the first word of "intltool-merge", so it can be a program name with args. -set dummy intltool-merge; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_MERGE+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $INTLTOOL_MERGE in - [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_MERGE="$INTLTOOL_MERGE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE -if test -n "$INTLTOOL_MERGE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_MERGE" >&5 -$as_echo "$INTLTOOL_MERGE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -# Extract the first word of "intltool-extract", so it can be a program name with args. -set dummy intltool-extract; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_EXTRACT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $INTLTOOL_EXTRACT in - [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_EXTRACT="$INTLTOOL_EXTRACT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT -if test -n "$INTLTOOL_EXTRACT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_EXTRACT" >&5 -$as_echo "$INTLTOOL_EXTRACT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then - as_fn_error $? "The intltool scripts were not found. Please install intltool." "$LINENO" 5 -fi - - INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' -INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< $@' - INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' -INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< $@' - INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# Check the gettext tools to make sure they are GNU -# Extract the first word of "xgettext", so it can be a program name with args. -set dummy xgettext; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_XGETTEXT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $XGETTEXT in - [\\/]* | ?:[\\/]*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -XGETTEXT=$ac_cv_path_XGETTEXT -if test -n "$XGETTEXT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 -$as_echo "$XGETTEXT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -# Extract the first word of "msgmerge", so it can be a program name with args. -set dummy msgmerge; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MSGMERGE+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MSGMERGE in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -MSGMERGE=$ac_cv_path_MSGMERGE -if test -n "$MSGMERGE"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 -$as_echo "$MSGMERGE" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -# Extract the first word of "msgfmt", so it can be a program name with args. -set dummy msgfmt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MSGFMT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -MSGFMT=$ac_cv_path_MSGFMT -if test -n "$MSGFMT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 -$as_echo "$MSGFMT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -# Extract the first word of "gmsgfmt", so it can be a program name with args. -set dummy gmsgfmt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GMSGFMT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GMSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" - ;; -esac -fi -GMSGFMT=$ac_cv_path_GMSGFMT -if test -n "$GMSGFMT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 -$as_echo "$GMSGFMT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then - as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 -fi -xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" -mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" -mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" -if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then - as_fn_error $? "GNU gettext tools not found; required for intltool" "$LINENO" 5 -fi - -# Extract the first word of "perl", so it can be a program name with args. -set dummy perl; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_INTLTOOL_PERL+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $INTLTOOL_PERL in - [\\/]* | ?:[\\/]*) - ac_cv_path_INTLTOOL_PERL="$INTLTOOL_PERL" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL -if test -n "$INTLTOOL_PERL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INTLTOOL_PERL" >&5 -$as_echo "$INTLTOOL_PERL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test -z "$INTLTOOL_PERL"; then - as_fn_error $? "perl not found" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.8.1" >&5 -$as_echo_n "checking for perl >= 5.8.1... " >&6; } -$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 -if test $? -ne 0; then - as_fn_error $? "perl 5.8.1 is required for intltool" "$LINENO" 5 -else - IT_PERL_VERSION="`$INTLTOOL_PERL -e \"printf '%vd', $^V\"`" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5 -$as_echo "$IT_PERL_VERSION" >&6; } -fi -if test "x" != "xno-xml"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for XML::Parser" >&5 -$as_echo_n "checking for XML::Parser... " >&6; } - if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } - else - as_fn_error $? "XML::Parser perl module is required for intltool" "$LINENO" 5 - fi -fi - -# Substitute ALL_LINGUAS so we can use it in po/Makefile - - -# Set DATADIRNAME correctly if it is not set yet -# (copied from glib-gettext.m4) -if test -z "$DATADIRNAME"; then - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -extern int _nl_msg_cat_cntr; - return _nl_msg_cat_cntr - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - DATADIRNAME=share -else - case $host in - *-*-solaris*) - ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" -if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then : - DATADIRNAME=share -else - DATADIRNAME=lib -fi - - ;; - *) - DATADIRNAME=lib - ;; - esac -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi - - - - - - - - - # Check whether --enable-compile-warnings was given. -if test "${enable_compile_warnings+set}" = set; then : - enableval=$enable_compile_warnings; -else - enable_compile_warnings="yes" -fi - - - warnCFLAGS= - if test "x$GCC" != xyes; then - enable_compile_warnings=no - fi - - warning_flags= - realsave_CFLAGS="$CFLAGS" - - case "$enable_compile_warnings" in - no) - warning_flags= - ;; - minimum) - warning_flags="-Wall" - ;; - yes) - warning_flags="-Wall -Wmissing-prototypes" - ;; - maximum|error) - warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith" - CFLAGS="$warning_flags $CFLAGS" - for option in -Wno-sign-compare; do - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $option" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether gcc understands $option" >&5 -$as_echo_n "checking whether gcc understands $option... " >&6; } - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - has_option=yes -else - has_option=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - CFLAGS="$SAVE_CFLAGS" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $has_option" >&5 -$as_echo "$has_option" >&6; } - if test $has_option = yes; then - warning_flags="$warning_flags $option" - fi - unset has_option - unset SAVE_CFLAGS - done - unset option - if test "$enable_compile_warnings" = "error" ; then - warning_flags="$warning_flags -Werror" - fi - ;; - *) - as_fn_error $? "Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" "$LINENO" 5 - ;; - esac - CFLAGS="$realsave_CFLAGS" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking what warning flags to pass to the C compiler" >&5 -$as_echo_n "checking what warning flags to pass to the C compiler... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $warning_flags" >&5 -$as_echo "$warning_flags" >&6; } - - # Check whether --enable-iso-c was given. -if test "${enable_iso_c+set}" = set; then : - enableval=$enable_iso_c; -else - enable_iso_c=no -fi - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking what language compliance flags to pass to the C compiler" >&5 -$as_echo_n "checking what language compliance flags to pass to the C compiler... " >&6; } - complCFLAGS= - if test "x$enable_iso_c" != "xno"; then - if test "x$GCC" = "xyes"; then - case " $CFLAGS " in - *\ \ -ansi\ \ *) ;; - *) complCFLAGS="$complCFLAGS -ansi" ;; - esac - case " $CFLAGS " in - *\ \ -pedantic\ \ *) ;; - *) complCFLAGS="$complCFLAGS -pedantic" ;; - esac - fi - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $complCFLAGS" >&5 -$as_echo "$complCFLAGS" >&6; } - - WARN_CFLAGS="$warning_flags $complCFLAGS" - - - - - - - - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. -set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -PKG_CONFIG=$ac_cv_path_PKG_CONFIG -if test -n "$PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 -$as_echo "$PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_path_PKG_CONFIG"; then - ac_pt_PKG_CONFIG=$PKG_CONFIG - # Extract the first word of "pkg-config", so it can be a program name with args. -set dummy pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $ac_pt_PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG -if test -n "$ac_pt_PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 -$as_echo "$ac_pt_PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_pt_PKG_CONFIG" = x; then - PKG_CONFIG="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - PKG_CONFIG=$ac_pt_PKG_CONFIG - fi -else - PKG_CONFIG="$ac_cv_path_PKG_CONFIG" -fi - -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=0.9.0 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 -$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - PKG_CONFIG="" - fi -fi - -gdu_cv_version_required=0.3.2 - -if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"mate-doc-utils >= \$gdu_cv_version_required\""; } >&5 - ($PKG_CONFIG --exists --print-errors "mate-doc-utils >= $gdu_cv_version_required") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - gdu_cv_have_gdu=yes -else - gdu_cv_have_gdu=no -fi - -if test "$gdu_cv_have_gdu" = "yes"; then - : -else - as_fn_error $? "mate-doc-utils >= $gdu_cv_version_required not found" "$LINENO" 5 -fi - - - -# Check whether --with-help-dir was given. -if test "${with_help_dir+set}" = set; then : - withval=$with_help_dir; -else - with_help_dir='${datadir}/mate/help' -fi - -HELP_DIR="$with_help_dir" - - - -# Check whether --with-omf-dir was given. -if test "${with_omf_dir+set}" = set; then : - withval=$with_omf_dir; -else - with_omf_dir='${datadir}/omf' -fi - -OMF_DIR="$with_omf_dir" - - - -# Check whether --with-help-formats was given. -if test "${with_help_formats+set}" = set; then : - withval=$with_help_formats; -else - with_help_formats='' -fi - -DOC_USER_FORMATS="$with_help_formats" - - -# Check whether --enable-scrollkeeper was given. -if test "${enable_scrollkeeper+set}" = set; then : - enableval=$enable_scrollkeeper; -else - enable_scrollkeeper=yes -fi - - if test "$gdu_cv_have_gdu" = "yes" -a "$enable_scrollkeeper" = "yes"; then - ENABLE_SK_TRUE= - ENABLE_SK_FALSE='#' -else - ENABLE_SK_TRUE='#' - ENABLE_SK_FALSE= -fi - - -DISTCHECK_CONFIGURE_FLAGS="--disable-scrollkeeper $DISTCHECK_CONFIGURE_FLAGS" - - - if test "$gdu_cv_have_gdu" = "yes"; then - HAVE_MATE_DOC_UTILS_TRUE= - HAVE_MATE_DOC_UTILS_FALSE='#' -else - HAVE_MATE_DOC_UTILS_TRUE='#' - HAVE_MATE_DOC_UTILS_FALSE= -fi - - - - -# Extract the first word of "glib-genmarshal", so it can be a program name with args. -set dummy glib-genmarshal; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GLIB_GENMARSHAL+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GLIB_GENMARSHAL in - [\\/]* | ?:[\\/]*) - ac_cv_path_GLIB_GENMARSHAL="$GLIB_GENMARSHAL" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_GLIB_GENMARSHAL="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -GLIB_GENMARSHAL=$ac_cv_path_GLIB_GENMARSHAL -if test -n "$GLIB_GENMARSHAL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_GENMARSHAL" >&5 -$as_echo "$GLIB_GENMARSHAL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - -if test -d ".git"; then - default_strict=yes -else - default_strict=no -fi - -# Check whether --enable-strict was given. -if test "${enable_strict+set}" = set; then : - enableval=$enable_strict; enable_strict=$enableval -else - enable_strict=$default_strict -fi - -if test x$enable_strict != xno; then - CPPFLAGS="$CPPFLAGS -DG_DISABLE_SINGLE_INCLUDES -DGTK_DISABLE_SINGLE_INCLUDES" - CPPFLAGS="$CPPFLAGS -DG_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED" - CPPFLAGS="$CPPFLAGS -DGDK_MULTIHEAD_SAFE -DGTK_MULTIHEAD_SAFE" - CPPFLAGS="$CPPFLAGS -DGSEAL_ENABLE" - if test "$GCC" = "yes"; then - WARNINGFLAGS="$WARNINGFLAGS -Werror" - fi -fi - -if test "$GCC" = "yes"; then - WARNINGFLAGS="$WARNINGFLAGS -Wall" - WARNINGFLAGS="$WARNINGFLAGS -Wcast-align -Wno-uninitialized" - WARNINGFLAGS="$WARNINGFLAGS -Wmissing-declarations" -# WARNINGFLAGS="$WARNINGFLAGS -Wredundant-decls" -# WARNINGFLAGS="$WARNINGFLAGS -Wmissing-noreturn" - WARNINGFLAGS="$WARNINGFLAGS -Wpointer-arith" - WARNINGFLAGS="$WARNINGFLAGS -Wcast-align" - WARNINGFLAGS="$WARNINGFLAGS -Wwrite-strings" - WARNINGFLAGS="$WARNINGFLAGS -Winit-self" - WARNINGFLAGS="$WARNINGFLAGS -Wreturn-type" - WARNINGFLAGS="$WARNINGFLAGS -Wformat-nonliteral" - WARNINGFLAGS="$WARNINGFLAGS -Wformat-security" - WARNINGFLAGS="$WARNINGFLAGS -Wmissing-include-dirs" - WARNINGFLAGS="$WARNINGFLAGS -Wmissing-format-attribute" - WARNINGFLAGS="$WARNINGFLAGS -Wclobbered" - WARNINGFLAGS="$WARNINGFLAGS -Wempty-body" - WARNINGFLAGS="$WARNINGFLAGS -Wignored-qualifiers" -# WARNINGFLAGS="$WARNINGFLAGS -Wsign-compare" - WARNINGFLAGS="$WARNINGFLAGS -Wtype-limits" -# WARNINGFLAGS="$WARNINGFLAGS -Wuninitialized" -# WARNINGFLAGS="$WARNINGFLAGS -Waggregate-return" - WARNINGFLAGS="$WARNINGFLAGS -Wdeclaration-after-statement" - WARNINGFLAGS="$WARNINGFLAGS -Wshadow" - WARNINGFLAGS="$WARNINGFLAGS -Winline" -# WARNINGFLAGS="$WARNINGFLAGS -Wswitch-enum" - WARNINGFLAGS="$WARNINGFLAGS -Wmissing-parameter-type" - WARNINGFLAGS="$WARNINGFLAGS -Woverride-init" - WARNINGFLAGS="$WARNINGFLAGS -Wno-strict-aliasing" -else - WARNINGFLAGS="" -fi - - -CPPFLAGS="$CPPFLAGS -g" -CPPFLAGS="$CPPFLAGS -fexceptions" - -GETTEXT_PACKAGE=mate-power-manager - - -$as_echo "#define GETTEXT_PACKAGE \"mate-power-manager\"" >>confdefs.h - - - - for ac_header in locale.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "locale.h" "ac_cv_header_locale_h" "$ac_includes_default" -if test "x$ac_cv_header_locale_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LOCALE_H 1 -_ACEOF - -fi - -done - - if test $ac_cv_header_locale_h = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for LC_MESSAGES" >&5 -$as_echo_n "checking for LC_MESSAGES... " >&6; } -if ${am_cv_val_LC_MESSAGES+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <locale.h> -int -main () -{ -return LC_MESSAGES - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - am_cv_val_LC_MESSAGES=yes -else - am_cv_val_LC_MESSAGES=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_val_LC_MESSAGES" >&5 -$as_echo "$am_cv_val_LC_MESSAGES" >&6; } - if test $am_cv_val_LC_MESSAGES = yes; then - -$as_echo "#define HAVE_LC_MESSAGES 1" >>confdefs.h - - fi - fi - USE_NLS=yes - - - gt_cv_have_gettext=no - - CATOBJEXT=NONE - XGETTEXT=: - INTLLIBS= - - ac_fn_c_check_header_mongrel "$LINENO" "libintl.h" "ac_cv_header_libintl_h" "$ac_includes_default" -if test "x$ac_cv_header_libintl_h" = xyes; then : - gt_cv_func_dgettext_libintl="no" - libintl_extra_libs="" - - # - # First check in libc - # - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in libc" >&5 -$as_echo_n "checking for ngettext in libc... " >&6; } -if ${gt_cv_func_ngettext_libc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include <libintl.h> - -int -main () -{ -return !ngettext ("","", 1) - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - gt_cv_func_ngettext_libc=yes -else - gt_cv_func_ngettext_libc=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_ngettext_libc" >&5 -$as_echo "$gt_cv_func_ngettext_libc" >&6; } - - if test "$gt_cv_func_ngettext_libc" = "yes" ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dgettext in libc" >&5 -$as_echo_n "checking for dgettext in libc... " >&6; } -if ${gt_cv_func_dgettext_libc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include <libintl.h> - -int -main () -{ -return !dgettext ("","") - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - gt_cv_func_dgettext_libc=yes -else - gt_cv_func_dgettext_libc=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_dgettext_libc" >&5 -$as_echo "$gt_cv_func_dgettext_libc" >&6; } - fi - - if test "$gt_cv_func_ngettext_libc" = "yes" ; then - for ac_func in bind_textdomain_codeset -do : - ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" -if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_BIND_TEXTDOMAIN_CODESET 1 -_ACEOF - -fi -done - - fi - - # - # If we don't have everything we want, check in libintl - # - if test "$gt_cv_func_dgettext_libc" != "yes" \ - || test "$gt_cv_func_ngettext_libc" != "yes" \ - || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for bindtextdomain in -lintl" >&5 -$as_echo_n "checking for bindtextdomain in -lintl... " >&6; } -if ${ac_cv_lib_intl_bindtextdomain+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lintl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char bindtextdomain (); -int -main () -{ -return bindtextdomain (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_intl_bindtextdomain=yes -else - ac_cv_lib_intl_bindtextdomain=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_bindtextdomain" >&5 -$as_echo "$ac_cv_lib_intl_bindtextdomain" >&6; } -if test "x$ac_cv_lib_intl_bindtextdomain" = xyes; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in -lintl" >&5 -$as_echo_n "checking for ngettext in -lintl... " >&6; } -if ${ac_cv_lib_intl_ngettext+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lintl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char ngettext (); -int -main () -{ -return ngettext (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_intl_ngettext=yes -else - ac_cv_lib_intl_ngettext=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_ngettext" >&5 -$as_echo "$ac_cv_lib_intl_ngettext" >&6; } -if test "x$ac_cv_lib_intl_ngettext" = xyes; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dgettext in -lintl" >&5 -$as_echo_n "checking for dgettext in -lintl... " >&6; } -if ${ac_cv_lib_intl_dgettext+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lintl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dgettext (); -int -main () -{ -return dgettext (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_intl_dgettext=yes -else - ac_cv_lib_intl_dgettext=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_dgettext" >&5 -$as_echo "$ac_cv_lib_intl_dgettext" >&6; } -if test "x$ac_cv_lib_intl_dgettext" = xyes; then : - gt_cv_func_dgettext_libintl=yes -fi - -fi - -fi - - - if test "$gt_cv_func_dgettext_libintl" != "yes" ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if -liconv is needed to use gettext" >&5 -$as_echo_n "checking if -liconv is needed to use gettext... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: " >&5 -$as_echo "" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ngettext in -lintl" >&5 -$as_echo_n "checking for ngettext in -lintl... " >&6; } -if ${ac_cv_lib_intl_ngettext+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lintl -liconv $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char ngettext (); -int -main () -{ -return ngettext (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_intl_ngettext=yes -else - ac_cv_lib_intl_ngettext=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_ngettext" >&5 -$as_echo "$ac_cv_lib_intl_ngettext" >&6; } -if test "x$ac_cv_lib_intl_ngettext" = xyes; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dcgettext in -lintl" >&5 -$as_echo_n "checking for dcgettext in -lintl... " >&6; } -if ${ac_cv_lib_intl_dcgettext+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lintl -liconv $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dcgettext (); -int -main () -{ -return dcgettext (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_intl_dcgettext=yes -else - ac_cv_lib_intl_dcgettext=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_dcgettext" >&5 -$as_echo "$ac_cv_lib_intl_dcgettext" >&6; } -if test "x$ac_cv_lib_intl_dcgettext" = xyes; then : - gt_cv_func_dgettext_libintl=yes - libintl_extra_libs=-liconv -else - : -fi - -else - : -fi - - fi - - # - # If we found libintl, then check in it for bind_textdomain_codeset(); - # we'll prefer libc if neither have bind_textdomain_codeset(), - # and both have dgettext and ngettext - # - if test "$gt_cv_func_dgettext_libintl" = "yes" ; then - glib_save_LIBS="$LIBS" - LIBS="$LIBS -lintl $libintl_extra_libs" - unset ac_cv_func_bind_textdomain_codeset - for ac_func in bind_textdomain_codeset -do : - ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" -if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_BIND_TEXTDOMAIN_CODESET 1 -_ACEOF - -fi -done - - LIBS="$glib_save_LIBS" - - if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then - gt_cv_func_dgettext_libc=no - else - if test "$gt_cv_func_dgettext_libc" = "yes" \ - && test "$gt_cv_func_ngettext_libc" = "yes"; then - gt_cv_func_dgettext_libintl=no - fi - fi - fi - fi - - if test "$gt_cv_func_dgettext_libc" = "yes" \ - || test "$gt_cv_func_dgettext_libintl" = "yes"; then - gt_cv_have_gettext=yes - fi - - if test "$gt_cv_func_dgettext_libintl" = "yes"; then - INTLLIBS="-lintl $libintl_extra_libs" - fi - - if test "$gt_cv_have_gettext" = "yes"; then - -$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h - - # Extract the first word of "msgfmt", so it can be a program name with args. -set dummy msgfmt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MSGFMT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case "$MSGFMT" in - /*) - ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then - ac_cv_path_MSGFMT="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" - ;; -esac -fi -MSGFMT="$ac_cv_path_MSGFMT" -if test "$MSGFMT" != "no"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 -$as_echo "$MSGFMT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - if test "$MSGFMT" != "no"; then - glib_save_LIBS="$LIBS" - LIBS="$LIBS $INTLLIBS" - for ac_func in dcgettext -do : - ac_fn_c_check_func "$LINENO" "dcgettext" "ac_cv_func_dcgettext" -if test "x$ac_cv_func_dcgettext" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_DCGETTEXT 1 -_ACEOF - -fi -done - - MSGFMT_OPTS= - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if msgfmt accepts -c" >&5 -$as_echo_n "checking if msgfmt accepts -c... " >&6; } - cat >conftest.foo <<_ACEOF - -msgid "" -msgstr "" -"Content-Type: text/plain; charset=UTF-8\n" -"Project-Id-Version: test 1.0\n" -"PO-Revision-Date: 2007-02-15 12:01+0100\n" -"Last-Translator: test <[email protected]>\n" -"Language-Team: C <[email protected]>\n" -"MIME-Version: 1.0\n" -"Content-Transfer-Encoding: 8bit\n" - -_ACEOF -if { { $as_echo "$as_me:${as_lineno-$LINENO}: \$MSGFMT -c -o /dev/null conftest.foo"; } >&5 - ($MSGFMT -c -o /dev/null conftest.foo) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - MSGFMT_OPTS=-c; { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -echo "$as_me: failed input was:" >&5 -sed 's/^/| /' conftest.foo >&5 -fi - - # Extract the first word of "gmsgfmt", so it can be a program name with args. -set dummy gmsgfmt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_GMSGFMT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $GMSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" - ;; -esac -fi -GMSGFMT=$ac_cv_path_GMSGFMT -if test -n "$GMSGFMT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 -$as_echo "$GMSGFMT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - # Extract the first word of "xgettext", so it can be a program name with args. -set dummy xgettext; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_XGETTEXT+:} false; then : - $as_echo_n "(cached) " >&6 -else - case "$XGETTEXT" in - /*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then - ac_cv_path_XGETTEXT="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" - ;; -esac -fi -XGETTEXT="$ac_cv_path_XGETTEXT" -if test "$XGETTEXT" != ":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 -$as_echo "$XGETTEXT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -extern int _nl_msg_cat_cntr; - return _nl_msg_cat_cntr - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - CATOBJEXT=.gmo - DATADIRNAME=share -else - case $host in - *-*-solaris*) - ac_fn_c_check_func "$LINENO" "bind_textdomain_codeset" "ac_cv_func_bind_textdomain_codeset" -if test "x$ac_cv_func_bind_textdomain_codeset" = xyes; then : - CATOBJEXT=.gmo - DATADIRNAME=share -else - CATOBJEXT=.mo - DATADIRNAME=lib -fi - - ;; - *) - CATOBJEXT=.mo - DATADIRNAME=lib - ;; - esac -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$glib_save_LIBS" - INSTOBJEXT=.mo - else - gt_cv_have_gettext=no - fi - fi - -fi - - - - if test "$gt_cv_have_gettext" = "yes" ; then - -$as_echo "#define ENABLE_NLS 1" >>confdefs.h - - fi - - if test "$XGETTEXT" != ":"; then - if $XGETTEXT --omit-header /dev/null 2> /dev/null; then - : ; - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: found xgettext program is not GNU xgettext; ignore it" >&5 -$as_echo "found xgettext program is not GNU xgettext; ignore it" >&6; } - XGETTEXT=":" - fi - fi - - # We need to process the po/ directory. - POSUB=po - - ac_config_commands="$ac_config_commands default-1" - - - for lang in $ALL_LINGUAS; do - GMOFILES="$GMOFILES $lang.gmo" - POFILES="$POFILES $lang.po" - done - - - - - - - - - - - - - - if test "$gt_cv_have_gettext" = "yes"; then - if test "x$ALL_LINGUAS" = "x"; then - LINGUAS= - else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for catalogs to be installed" >&5 -$as_echo_n "checking for catalogs to be installed... " >&6; } - NEW_LINGUAS= - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - NEW_LINGUAS="$NEW_LINGUAS $presentlang" - fi - done - LINGUAS=$NEW_LINGUAS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LINGUAS" >&5 -$as_echo "$LINGUAS" >&6; } - fi - - if test -n "$LINGUAS"; then - for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done - fi - fi - - MKINSTALLDIRS= - if test -n "$ac_aux_dir"; then - MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" - fi - if test -z "$MKINSTALLDIRS"; then - MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" - fi - - - test -d po || mkdir po - if test "x$srcdir" != "x."; then - if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then - posrcprefix="$srcdir/" - else - posrcprefix="../$srcdir/" - fi - else - posrcprefix="../" - fi - rm -f po/POTFILES - sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ - < $srcdir/po/POTFILES.in > po/POTFILES - - -GLIB_REQUIRED=2.13.0 -GTK_REQUIRED=2.17.7 -GDK_REQUIRED=2.11.0 -MATECONF_REQUIRED=2.10.0 -MATE_KEYRING_REQUIRED=0.6.0 -DBUS_REQUIRED=1.0 -DBUS_GLIB_REQUIRED=0.70 -LIBMATENOTIFY_REQUIRED=0.4.3 -LIBWNCK_REQUIRED=2.10.0 -CAIRO_REQUIRED=1.0.0 -UNIQUE_REQUIRED=0.9.4 -LIBPANEL_REQUIRED=2.0.0 -XRANDR_REQUIRED=1.2.0 -CANBERRA_REQUIRED=0.10 -UPOWER_REQUIRED=0.9.1 - - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GLIB" >&5 -$as_echo_n "checking for GLIB... " >&6; } - -if test -n "$GLIB_CFLAGS"; then - pkg_cv_GLIB_CFLAGS="$GLIB_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_GLIB_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$GLIB_LIBS"; then - pkg_cv_GLIB_LIBS="$GLIB_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED gobject-2.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_GLIB_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - GLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>&1` - else - GLIB_PKG_ERRORS=`$PKG_CONFIG --print-errors "glib-2.0 >= $GLIB_REQUIRED gobject-2.0" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$GLIB_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements (glib-2.0 >= $GLIB_REQUIRED gobject-2.0) were not met: - -$GLIB_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables GLIB_CFLAGS -and GLIB_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 - -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables GLIB_CFLAGS -and GLIB_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details" "$LINENO" 5; } - -else - GLIB_CFLAGS=$pkg_cv_GLIB_CFLAGS - GLIB_LIBS=$pkg_cv_GLIB_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for CANBERRA" >&5 -$as_echo_n "checking for CANBERRA... " >&6; } - -if test -n "$CANBERRA_CFLAGS"; then - pkg_cv_CANBERRA_CFLAGS="$CANBERRA_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libcanberra-gtk >= \$CANBERRA_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libcanberra-gtk >= $CANBERRA_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_CANBERRA_CFLAGS=`$PKG_CONFIG --cflags "libcanberra-gtk >= $CANBERRA_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$CANBERRA_LIBS"; then - pkg_cv_CANBERRA_LIBS="$CANBERRA_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libcanberra-gtk >= \$CANBERRA_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libcanberra-gtk >= $CANBERRA_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_CANBERRA_LIBS=`$PKG_CONFIG --libs "libcanberra-gtk >= $CANBERRA_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - CANBERRA_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libcanberra-gtk >= $CANBERRA_REQUIRED" 2>&1` - else - CANBERRA_PKG_ERRORS=`$PKG_CONFIG --print-errors "libcanberra-gtk >= $CANBERRA_REQUIRED" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$CANBERRA_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements (libcanberra-gtk >= $CANBERRA_REQUIRED) were not met: - -$CANBERRA_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables CANBERRA_CFLAGS -and CANBERRA_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 - -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables CANBERRA_CFLAGS -and CANBERRA_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details" "$LINENO" 5; } - -else - CANBERRA_CFLAGS=$pkg_cv_CANBERRA_CFLAGS - CANBERRA_LIBS=$pkg_cv_CANBERRA_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for DBUS" >&5 -$as_echo_n "checking for DBUS... " >&6; } - -if test -n "$DBUS_CFLAGS"; then - pkg_cv_DBUS_CFLAGS="$DBUS_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" - dbus-glib-1 >= \$DBUS_GLIB_REQUIRED - dbus-1 >= \$DBUS_REQUIRED - gthread-2.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors " - dbus-glib-1 >= $DBUS_GLIB_REQUIRED - dbus-1 >= $DBUS_REQUIRED - gthread-2.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_DBUS_CFLAGS=`$PKG_CONFIG --cflags " - dbus-glib-1 >= $DBUS_GLIB_REQUIRED - dbus-1 >= $DBUS_REQUIRED - gthread-2.0" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$DBUS_LIBS"; then - pkg_cv_DBUS_LIBS="$DBUS_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" - dbus-glib-1 >= \$DBUS_GLIB_REQUIRED - dbus-1 >= \$DBUS_REQUIRED - gthread-2.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors " - dbus-glib-1 >= $DBUS_GLIB_REQUIRED - dbus-1 >= $DBUS_REQUIRED - gthread-2.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_DBUS_LIBS=`$PKG_CONFIG --libs " - dbus-glib-1 >= $DBUS_GLIB_REQUIRED - dbus-1 >= $DBUS_REQUIRED - gthread-2.0" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors " - dbus-glib-1 >= $DBUS_GLIB_REQUIRED - dbus-1 >= $DBUS_REQUIRED - gthread-2.0" 2>&1` - else - DBUS_PKG_ERRORS=`$PKG_CONFIG --print-errors " - dbus-glib-1 >= $DBUS_GLIB_REQUIRED - dbus-1 >= $DBUS_REQUIRED - gthread-2.0" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$DBUS_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements ( - dbus-glib-1 >= $DBUS_GLIB_REQUIRED - dbus-1 >= $DBUS_REQUIRED - gthread-2.0) were not met: - -$DBUS_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables DBUS_CFLAGS -and DBUS_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 - -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables DBUS_CFLAGS -and DBUS_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details" "$LINENO" 5; } - -else - DBUS_CFLAGS=$pkg_cv_DBUS_CFLAGS - DBUS_LIBS=$pkg_cv_DBUS_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for MATE" >&5 -$as_echo_n "checking for MATE... " >&6; } - -if test -n "$MATE_CFLAGS"; then - pkg_cv_MATE_CFLAGS="$MATE_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" - libwnck-1.0 >= \$LIBWNCK_REQUIRED - gtk+-2.0 >= \$GTK_REQUIRED - mateconf-2.0 >= \$MATECONF_REQUIRED - mate-keyring-1 >= \$MATE_KEYRING_REQUIRED - cairo >= \$CAIRO_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors " - libwnck-1.0 >= $LIBWNCK_REQUIRED - gtk+-2.0 >= $GTK_REQUIRED - mateconf-2.0 >= $MATECONF_REQUIRED - mate-keyring-1 >= $MATE_KEYRING_REQUIRED - cairo >= $CAIRO_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_MATE_CFLAGS=`$PKG_CONFIG --cflags " - libwnck-1.0 >= $LIBWNCK_REQUIRED - gtk+-2.0 >= $GTK_REQUIRED - mateconf-2.0 >= $MATECONF_REQUIRED - mate-keyring-1 >= $MATE_KEYRING_REQUIRED - cairo >= $CAIRO_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$MATE_LIBS"; then - pkg_cv_MATE_LIBS="$MATE_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" - libwnck-1.0 >= \$LIBWNCK_REQUIRED - gtk+-2.0 >= \$GTK_REQUIRED - mateconf-2.0 >= \$MATECONF_REQUIRED - mate-keyring-1 >= \$MATE_KEYRING_REQUIRED - cairo >= \$CAIRO_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors " - libwnck-1.0 >= $LIBWNCK_REQUIRED - gtk+-2.0 >= $GTK_REQUIRED - mateconf-2.0 >= $MATECONF_REQUIRED - mate-keyring-1 >= $MATE_KEYRING_REQUIRED - cairo >= $CAIRO_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_MATE_LIBS=`$PKG_CONFIG --libs " - libwnck-1.0 >= $LIBWNCK_REQUIRED - gtk+-2.0 >= $GTK_REQUIRED - mateconf-2.0 >= $MATECONF_REQUIRED - mate-keyring-1 >= $MATE_KEYRING_REQUIRED - cairo >= $CAIRO_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - MATE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors " - libwnck-1.0 >= $LIBWNCK_REQUIRED - gtk+-2.0 >= $GTK_REQUIRED - mateconf-2.0 >= $MATECONF_REQUIRED - mate-keyring-1 >= $MATE_KEYRING_REQUIRED - cairo >= $CAIRO_REQUIRED" 2>&1` - else - MATE_PKG_ERRORS=`$PKG_CONFIG --print-errors " - libwnck-1.0 >= $LIBWNCK_REQUIRED - gtk+-2.0 >= $GTK_REQUIRED - mateconf-2.0 >= $MATECONF_REQUIRED - mate-keyring-1 >= $MATE_KEYRING_REQUIRED - cairo >= $CAIRO_REQUIRED" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$MATE_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements ( - libwnck-1.0 >= $LIBWNCK_REQUIRED - gtk+-2.0 >= $GTK_REQUIRED - mateconf-2.0 >= $MATECONF_REQUIRED - mate-keyring-1 >= $MATE_KEYRING_REQUIRED - cairo >= $CAIRO_REQUIRED) were not met: - -$MATE_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables MATE_CFLAGS -and MATE_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 - -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables MATE_CFLAGS -and MATE_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details" "$LINENO" 5; } - -else - MATE_CFLAGS=$pkg_cv_MATE_CFLAGS - MATE_LIBS=$pkg_cv_MATE_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GDK" >&5 -$as_echo_n "checking for GDK... " >&6; } - -if test -n "$GDK_CFLAGS"; then - pkg_cv_GDK_CFLAGS="$GDK_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" - gdk-2.0 >= \$GDK_REQUIRED - gdk-x11-2.0 >= \$GDK_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors " - gdk-2.0 >= $GDK_REQUIRED - gdk-x11-2.0 >= $GDK_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_GDK_CFLAGS=`$PKG_CONFIG --cflags " - gdk-2.0 >= $GDK_REQUIRED - gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$GDK_LIBS"; then - pkg_cv_GDK_LIBS="$GDK_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" - gdk-2.0 >= \$GDK_REQUIRED - gdk-x11-2.0 >= \$GDK_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors " - gdk-2.0 >= $GDK_REQUIRED - gdk-x11-2.0 >= $GDK_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_GDK_LIBS=`$PKG_CONFIG --libs " - gdk-2.0 >= $GDK_REQUIRED - gdk-x11-2.0 >= $GDK_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - GDK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors " - gdk-2.0 >= $GDK_REQUIRED - gdk-x11-2.0 >= $GDK_REQUIRED" 2>&1` - else - GDK_PKG_ERRORS=`$PKG_CONFIG --print-errors " - gdk-2.0 >= $GDK_REQUIRED - gdk-x11-2.0 >= $GDK_REQUIRED" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$GDK_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements ( - gdk-2.0 >= $GDK_REQUIRED - gdk-x11-2.0 >= $GDK_REQUIRED) were not met: - -$GDK_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables GDK_CFLAGS -and GDK_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 - -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables GDK_CFLAGS -and GDK_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details" "$LINENO" 5; } - -else - GDK_CFLAGS=$pkg_cv_GDK_CFLAGS - GDK_LIBS=$pkg_cv_GDK_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for X11" >&5 -$as_echo_n "checking for X11... " >&6; } - -if test -n "$X11_CFLAGS"; then - pkg_cv_X11_CFLAGS="$X11_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" - xrandr >= \$XRANDR_REQUIRED - xrender x11 xext xproto\""; } >&5 - ($PKG_CONFIG --exists --print-errors " - xrandr >= $XRANDR_REQUIRED - xrender x11 xext xproto") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_X11_CFLAGS=`$PKG_CONFIG --cflags " - xrandr >= $XRANDR_REQUIRED - xrender x11 xext xproto" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$X11_LIBS"; then - pkg_cv_X11_LIBS="$X11_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \" - xrandr >= \$XRANDR_REQUIRED - xrender x11 xext xproto\""; } >&5 - ($PKG_CONFIG --exists --print-errors " - xrandr >= $XRANDR_REQUIRED - xrender x11 xext xproto") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_X11_LIBS=`$PKG_CONFIG --libs " - xrandr >= $XRANDR_REQUIRED - xrender x11 xext xproto" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - X11_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors " - xrandr >= $XRANDR_REQUIRED - xrender x11 xext xproto" 2>&1` - else - X11_PKG_ERRORS=`$PKG_CONFIG --print-errors " - xrandr >= $XRANDR_REQUIRED - xrender x11 xext xproto" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$X11_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements ( - xrandr >= $XRANDR_REQUIRED - xrender x11 xext xproto) were not met: - -$X11_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables X11_CFLAGS -and X11_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 - -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables X11_CFLAGS -and X11_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details" "$LINENO" 5; } - -else - X11_CFLAGS=$pkg_cv_X11_CFLAGS - X11_LIBS=$pkg_cv_X11_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for X11" >&5 -$as_echo_n "checking for X11... " >&6; } - -if test -n "$X11_CFLAGS"; then - pkg_cv_X11_CFLAGS="$X11_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11 xrender\""; } >&5 - ($PKG_CONFIG --exists --print-errors "x11 xrender") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_X11_CFLAGS=`$PKG_CONFIG --cflags "x11 xrender" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$X11_LIBS"; then - pkg_cv_X11_LIBS="$X11_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"x11 xrender\""; } >&5 - ($PKG_CONFIG --exists --print-errors "x11 xrender") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_X11_LIBS=`$PKG_CONFIG --libs "x11 xrender" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - X11_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "x11 xrender" 2>&1` - else - X11_PKG_ERRORS=`$PKG_CONFIG --print-errors "x11 xrender" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$X11_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements (x11 xrender) were not met: - -$X11_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables X11_CFLAGS -and X11_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 - -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables X11_CFLAGS -and X11_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details" "$LINENO" 5; } - -else - X11_CFLAGS=$pkg_cv_X11_CFLAGS - X11_LIBS=$pkg_cv_X11_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - -if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xrandr >= 1.3\""; } >&5 - ($PKG_CONFIG --exists --print-errors "xrandr >= 1.3") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - -$as_echo "#define HAVE_XRANDR_13 1" >>confdefs.h - -fi - - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBMATENOTIFY" >&5 -$as_echo_n "checking for LIBMATENOTIFY... " >&6; } - -if test -n "$LIBMATENOTIFY_CFLAGS"; then - pkg_cv_LIBMATENOTIFY_CFLAGS="$LIBMATENOTIFY_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libmatenotify >= \$LIBMATENOTIFY_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libmatenotify >= $LIBMATENOTIFY_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_LIBMATENOTIFY_CFLAGS=`$PKG_CONFIG --cflags "libmatenotify >= $LIBMATENOTIFY_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$LIBMATENOTIFY_LIBS"; then - pkg_cv_LIBMATENOTIFY_LIBS="$LIBMATENOTIFY_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libmatenotify >= \$LIBMATENOTIFY_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libmatenotify >= $LIBMATENOTIFY_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_LIBMATENOTIFY_LIBS=`$PKG_CONFIG --libs "libmatenotify >= $LIBMATENOTIFY_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - LIBMATENOTIFY_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libmatenotify >= $LIBMATENOTIFY_REQUIRED" 2>&1` - else - LIBMATENOTIFY_PKG_ERRORS=`$PKG_CONFIG --print-errors "libmatenotify >= $LIBMATENOTIFY_REQUIRED" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$LIBMATENOTIFY_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements (libmatenotify >= $LIBMATENOTIFY_REQUIRED) were not met: - -$LIBMATENOTIFY_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables LIBMATENOTIFY_CFLAGS -and LIBMATENOTIFY_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 - -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables LIBMATENOTIFY_CFLAGS -and LIBMATENOTIFY_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details" "$LINENO" 5; } - -else - LIBMATENOTIFY_CFLAGS=$pkg_cv_LIBMATENOTIFY_CFLAGS - LIBMATENOTIFY_LIBS=$pkg_cv_LIBMATENOTIFY_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for UNIQUE" >&5 -$as_echo_n "checking for UNIQUE... " >&6; } - -if test -n "$UNIQUE_CFLAGS"; then - pkg_cv_UNIQUE_CFLAGS="$UNIQUE_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"unique-1.0 >= \$UNIQUE_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "unique-1.0 >= $UNIQUE_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_UNIQUE_CFLAGS=`$PKG_CONFIG --cflags "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$UNIQUE_LIBS"; then - pkg_cv_UNIQUE_LIBS="$UNIQUE_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"unique-1.0 >= \$UNIQUE_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "unique-1.0 >= $UNIQUE_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_UNIQUE_LIBS=`$PKG_CONFIG --libs "unique-1.0 >= $UNIQUE_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - UNIQUE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "unique-1.0 >= $UNIQUE_REQUIRED" 2>&1` - else - UNIQUE_PKG_ERRORS=`$PKG_CONFIG --print-errors "unique-1.0 >= $UNIQUE_REQUIRED" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$UNIQUE_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements (unique-1.0 >= $UNIQUE_REQUIRED) were not met: - -$UNIQUE_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables UNIQUE_CFLAGS -and UNIQUE_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 - -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables UNIQUE_CFLAGS -and UNIQUE_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details" "$LINENO" 5; } - -else - UNIQUE_CFLAGS=$pkg_cv_UNIQUE_CFLAGS - UNIQUE_LIBS=$pkg_cv_UNIQUE_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for UPOWER" >&5 -$as_echo_n "checking for UPOWER... " >&6; } - -if test -n "$UPOWER_CFLAGS"; then - pkg_cv_UPOWER_CFLAGS="$UPOWER_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"upower-glib >= \$UPOWER_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "upower-glib >= $UPOWER_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_UPOWER_CFLAGS=`$PKG_CONFIG --cflags "upower-glib >= $UPOWER_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$UPOWER_LIBS"; then - pkg_cv_UPOWER_LIBS="$UPOWER_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"upower-glib >= \$UPOWER_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "upower-glib >= $UPOWER_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_UPOWER_LIBS=`$PKG_CONFIG --libs "upower-glib >= $UPOWER_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - UPOWER_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "upower-glib >= $UPOWER_REQUIRED" 2>&1` - else - UPOWER_PKG_ERRORS=`$PKG_CONFIG --print-errors "upower-glib >= $UPOWER_REQUIRED" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$UPOWER_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements (upower-glib >= $UPOWER_REQUIRED) were not met: - -$UPOWER_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables UPOWER_CFLAGS -and UPOWER_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 - -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables UPOWER_CFLAGS -and UPOWER_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details" "$LINENO" 5; } - -else - UPOWER_CFLAGS=$pkg_cv_UPOWER_CFLAGS - UPOWER_LIBS=$pkg_cv_UPOWER_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - -# Extract the first word of "mateconftool-2", so it can be a program name with args. -set dummy mateconftool-2; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_MATECONFTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MATECONFTOOL in - [\\/]* | ?:[\\/]*) - ac_cv_path_MATECONFTOOL="$MATECONFTOOL" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_MATECONFTOOL="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -MATECONFTOOL=$ac_cv_path_MATECONFTOOL -if test -n "$MATECONFTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MATECONFTOOL" >&5 -$as_echo "$MATECONFTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - if test "x$MATECONF_SCHEMA_INSTALL_SOURCE" = "x"; then - MATECONF_SCHEMA_CONFIG_SOURCE=`mateconftool-2 --get-default-source` - else - MATECONF_SCHEMA_CONFIG_SOURCE=$MATECONF_SCHEMA_INSTALL_SOURCE - fi - - -# Check whether --with-mateconf-source was given. -if test "${with_mateconf_source+set}" = set; then : - withval=$with_mateconf_source; MATECONF_SCHEMA_CONFIG_SOURCE="$withval" -fi - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: Using config source $MATECONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5 -$as_echo "Using config source $MATECONF_SCHEMA_CONFIG_SOURCE for schema installation" >&6; } - - if test "x$MATECONF_SCHEMA_FILE_DIR" = "x"; then - MATECONF_SCHEMA_FILE_DIR='$(sysconfdir)/mateconf/schemas' - fi - - -# Check whether --with-mateconf-schema-file-dir was given. -if test "${with_mateconf_schema_file_dir+set}" = set; then : - withval=$with_mateconf_schema_file_dir; MATECONF_SCHEMA_FILE_DIR="$withval" -fi - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: Using $MATECONF_SCHEMA_FILE_DIR as install directory for schema files" >&5 -$as_echo "Using $MATECONF_SCHEMA_FILE_DIR as install directory for schema files" >&6; } - - # Check whether --enable-schemas-install was given. -if test "${enable_schemas_install+set}" = set; then : - enableval=$enable_schemas_install; case ${enableval} in - yes|no) ;; - *) as_fn_error $? "bad value ${enableval} for --enable-schemas-install" "$LINENO" 5 ;; - esac -fi - - if test "$enable_schemas_install" != no; then - MATECONF_SCHEMAS_INSTALL_TRUE= - MATECONF_SCHEMAS_INSTALL_FALSE='#' -else - MATECONF_SCHEMAS_INSTALL_TRUE='#' - MATECONF_SCHEMAS_INSTALL_FALSE= -fi - - - -if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xproto >= 7.0.14\""; } >&5 - ($PKG_CONFIG --exists --print-errors "xproto >= 7.0.14") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - -$as_echo "#define HAVE_XF86XK_BATTERY 1" >>confdefs.h - -fi - -if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xproto >= 7.0.15\""; } >&5 - ($PKG_CONFIG --exists --print-errors "xproto >= 7.0.15") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - -$as_echo "#define HAVE_XF86XK_SUSPEND 1" >>confdefs.h - - -$as_echo "#define HAVE_XF86XK_HIBERNATE 1" >>confdefs.h - -fi - -SYSCONFDIR=$sysconfdir - -DATADIR=$datadir - -BINDIR=$bindir - -SBINDIR=$sbindir - - - -# Check whether --with-doc-dir was given. -if test "${with_doc_dir+set}" = set; then : - withval=$with_doc_dir; DOCDIR="$with_doc_dir/mate-power-manager-$VERSION" -else - DOCDIR="$DATADIR/doc/mate-power-manager-$VERSION" -fi - - - -# Check whether --enable-tests was given. -if test "${enable_tests+set}" = set; then : - enableval=$enable_tests; enable_tests=$enableval -else - enable_tests=no -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to support tests" >&5 -$as_echo_n "checking whether to support tests... " >&6; } -have_tests=no -if test x$enable_tests = xyes ; then - have_tests=yes - -$as_echo "#define HAVE_TESTS 1" >>confdefs.h - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - if test $have_tests = yes; then - HAVE_TESTS_TRUE= - HAVE_TESTS_FALSE='#' -else - HAVE_TESTS_TRUE='#' - HAVE_TESTS_FALSE= -fi - - -# Check whether --enable-mateconf-defaults was given. -if test "${enable_mateconf_defaults+set}" = set; then : - enableval=$enable_mateconf_defaults; have_mateconfdefaults=$enableval -else - have_mateconfdefaults=yes -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to support mateconf defaults" >&5 -$as_echo_n "checking whether to support mateconf defaults... " >&6; } -if test x$have_mateconfdefaults = xyes ; then - -$as_echo "#define HAVE_MATECONF_DEFAULTS 1" >>confdefs.h - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_mateconfdefaults" >&5 -$as_echo "$have_mateconfdefaults" >&6; } - if test $have_mateconfdefaults = yes; then - HAVE_MATECONF_DEFAULTS_TRUE= - HAVE_MATECONF_DEFAULTS_FALSE='#' -else - HAVE_MATECONF_DEFAULTS_TRUE='#' - HAVE_MATECONF_DEFAULTS_FALSE= -fi - - -# Check whether --enable-applets was given. -if test "${enable_applets+set}" = set; then : - enableval=$enable_applets; enable_applets=$enableval -else - enable_applets=yes -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build applet support" >&5 -$as_echo_n "checking whether to build applet support... " >&6; } -have_applets=no -if test x$enable_applets = xyes ; then - have_applets=yes - - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for PANEL" >&5 -$as_echo_n "checking for PANEL... " >&6; } - -if test -n "$PANEL_CFLAGS"; then - pkg_cv_PANEL_CFLAGS="$PANEL_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libmatepanelapplet-2.0 >= \$LIBPANEL_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libmatepanelapplet-2.0 >= $LIBPANEL_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_PANEL_CFLAGS=`$PKG_CONFIG --cflags "libmatepanelapplet-2.0 >= $LIBPANEL_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$PANEL_LIBS"; then - pkg_cv_PANEL_LIBS="$PANEL_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libmatepanelapplet-2.0 >= \$LIBPANEL_REQUIRED\""; } >&5 - ($PKG_CONFIG --exists --print-errors "libmatepanelapplet-2.0 >= $LIBPANEL_REQUIRED") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_PANEL_LIBS=`$PKG_CONFIG --libs "libmatepanelapplet-2.0 >= $LIBPANEL_REQUIRED" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - PANEL_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libmatepanelapplet-2.0 >= $LIBPANEL_REQUIRED" 2>&1` - else - PANEL_PKG_ERRORS=`$PKG_CONFIG --print-errors "libmatepanelapplet-2.0 >= $LIBPANEL_REQUIRED" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$PANEL_PKG_ERRORS" >&5 - - as_fn_error $? "Package requirements (libmatepanelapplet-2.0 >= $LIBPANEL_REQUIRED) were not met: - -$PANEL_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables PANEL_CFLAGS -and PANEL_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details." "$LINENO" 5 - -elif test $pkg_failed = untried; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables PANEL_CFLAGS -and PANEL_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details" "$LINENO" 5; } - -else - PANEL_CFLAGS=$pkg_cv_PANEL_CFLAGS - PANEL_LIBS=$pkg_cv_PANEL_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -fi - -$as_echo "#define HAVE_APPLETS 1" >>confdefs.h - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_applets" >&5 -$as_echo "$have_applets" >&6; } - if test $have_applets = yes; then - HAVE_APPLETS_TRUE= - HAVE_APPLETS_FALSE='#' -else - HAVE_APPLETS_TRUE='#' - HAVE_APPLETS_FALSE= -fi - - -# Check whether --enable-docbook-docs was given. -if test "${enable_docbook_docs+set}" = set; then : - enableval=$enable_docbook_docs; enable_docbook_docs=$enableval -else - enable_docbook_docs=auto -fi - - -# Extract the first word of "xmlto", so it can be a program name with args. -set dummy xmlto; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_XMLTO+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $XMLTO in - [\\/]* | ?:[\\/]*) - ac_cv_path_XMLTO="$XMLTO" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_XMLTO="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_path_XMLTO" && ac_cv_path_XMLTO="no" - ;; -esac -fi -XMLTO=$ac_cv_path_XMLTO -if test -n "$XMLTO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XMLTO" >&5 -$as_echo "$XMLTO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build DocBook documentation" >&5 -$as_echo_n "checking whether to build DocBook documentation... " >&6; } -if test x$enable_docbook_docs = xauto ; then - if test x$XMLTO = xno ; then - enable_docbook_docs=no - else - enable_docbook_docs=yes - fi -fi -if test x$enable_docbook_docs = xyes -a x$XMLTO = xno; then - as_fn_error $? "Building DocBook docs explicitly required, but DocBook not found" "$LINENO" 5 -fi - if test x$enable_docbook_docs = xyes; then - DOCBOOK_DOCS_ENABLED_TRUE= - DOCBOOK_DOCS_ENABLED_FALSE='#' -else - DOCBOOK_DOCS_ENABLED_TRUE='#' - DOCBOOK_DOCS_ENABLED_FALSE= -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - - -# Check whether --with-dbus-services was given. -if test "${with_dbus_services+set}" = set; then : - withval=$with_dbus_services; DBUS_SERVICES_DIR="$with_dbus_services" -else - DBUS_SERVICES_DIR="$DATADIR/dbus-1/services" -fi - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Solaris kstat" >&5 -$as_echo_n "checking for Solaris kstat... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for kstat_open in -lkstat" >&5 -$as_echo_n "checking for kstat_open in -lkstat... " >&6; } -if ${ac_cv_lib_kstat_kstat_open+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lkstat $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char kstat_open (); -int -main () -{ -return kstat_open (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_kstat_kstat_open=yes -else - ac_cv_lib_kstat_kstat_open=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_kstat_kstat_open" >&5 -$as_echo "$ac_cv_lib_kstat_kstat_open" >&6; } -if test "x$ac_cv_lib_kstat_kstat_open" = xyes; then : - - -$as_echo "#define HAVE_KSTAT 1" >>confdefs.h - - GPM_EXTRA_LIBS="$GPM_EXTRA_LIBS -lkstat" - -fi - - - -# Extract the first word of "docbook2man", so it can be a program name with args. -set dummy docbook2man; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_DOCBOOK2MAN+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $DOCBOOK2MAN in - [\\/]* | ?:[\\/]*) - ac_cv_path_DOCBOOK2MAN="$DOCBOOK2MAN" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_DOCBOOK2MAN="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_path_DOCBOOK2MAN" && ac_cv_path_DOCBOOK2MAN="no" - ;; -esac -fi -DOCBOOK2MAN=$ac_cv_path_DOCBOOK2MAN -if test -n "$DOCBOOK2MAN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DOCBOOK2MAN" >&5 -$as_echo "$DOCBOOK2MAN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test "$DOCBOOK2MAN" = "no" ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: docbook2man not found, will not be able to build man documentation" >&5 -$as_echo "$as_me: WARNING: docbook2man not found, will not be able to build man documentation" >&2;} -fi - if test "$DOCBOOK2MAN" != "no"; then - HAVE_DOCBOOK2MAN_TRUE= - HAVE_DOCBOOK2MAN_FALSE='#' -else - HAVE_DOCBOOK2MAN_TRUE='#' - HAVE_DOCBOOK2MAN_FALSE= -fi - - -ac_config_files="$ac_config_files Makefile src/Makefile applets/Makefile applets/brightness/Makefile applets/inhibit/Makefile docs/Makefile man/Makefile help/Makefile po/Makefile.in tools/Makefile policy/Makefile data/Makefile data/mate-power-manager.desktop.in data/mate-power-preferences.desktop.in data/mate-power-statistics.desktop.in data/icons/Makefile data/icons/16x16/Makefile data/icons/16x16/actions/Makefile data/icons/16x16/apps/Makefile data/icons/16x16/status/Makefile data/icons/22x22/Makefile data/icons/22x22/actions/Makefile data/icons/22x22/apps/Makefile data/icons/22x22/status/Makefile data/icons/24x24/Makefile data/icons/24x24/actions/Makefile data/icons/24x24/apps/Makefile data/icons/24x24/status/Makefile data/icons/32x32/Makefile data/icons/32x32/actions/Makefile data/icons/32x32/apps/Makefile data/icons/32x32/status/Makefile data/icons/48x48/Makefile data/icons/48x48/actions/Makefile data/icons/48x48/apps/Makefile data/icons/48x48/status/Makefile data/icons/scalable/Makefile data/icons/scalable/actions/Makefile data/icons/scalable/apps/Makefile data/icons/scalable/status/Makefile" - - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - - ac_config_commands="$ac_config_commands po/stamp-it" - - -if test -z "${ENABLE_SK_TRUE}" && test -z "${ENABLE_SK_FALSE}"; then - as_fn_error $? "conditional \"ENABLE_SK\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_MATE_DOC_UTILS_TRUE}" && test -z "${HAVE_MATE_DOC_UTILS_FALSE}"; then - as_fn_error $? "conditional \"HAVE_MATE_DOC_UTILS\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${MATECONF_SCHEMAS_INSTALL_TRUE}" && test -z "${MATECONF_SCHEMAS_INSTALL_FALSE}"; then - as_fn_error $? "conditional \"MATECONF_SCHEMAS_INSTALL\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_TESTS_TRUE}" && test -z "${HAVE_TESTS_FALSE}"; then - as_fn_error $? "conditional \"HAVE_TESTS\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_MATECONF_DEFAULTS_TRUE}" && test -z "${HAVE_MATECONF_DEFAULTS_FALSE}"; then - as_fn_error $? "conditional \"HAVE_MATECONF_DEFAULTS\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_APPLETS_TRUE}" && test -z "${HAVE_APPLETS_FALSE}"; then - as_fn_error $? "conditional \"HAVE_APPLETS\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${DOCBOOK_DOCS_ENABLED_TRUE}" && test -z "${DOCBOOK_DOCS_ENABLED_FALSE}"; then - as_fn_error $? "conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_DOCBOOK2MAN_TRUE}" && test -z "${HAVE_DOCBOOK2MAN_FALSE}"; then - as_fn_error $? "conditional \"HAVE_DOCBOOK2MAN\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by mate-power-manager $as_me 2.32.0, which was -generated by GNU Autoconf 2.68. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to the package provider." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -mate-power-manager config.status 2.32.0 -configured by $0, generated by GNU Autoconf 2.68, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2010 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' -macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' -enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' -enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' -pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' -host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' -host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' -host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' -build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' -build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' -build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' -SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' -Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' -GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' -EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' -FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' -LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' -NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' -LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' -ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' -exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' -lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' -reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' -OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' -AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' -STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' -RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' -CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' -compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' -GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' -objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' -SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' -ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' -need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' -LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' -OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' -libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' -module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' -fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' -need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' -version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' -runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' -libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' -soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' -finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' -old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' -striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' - -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# Quote evaled strings. -for var in SED \ -GREP \ -EGREP \ -FGREP \ -LD \ -NM \ -LN_S \ -lt_SP2NL \ -lt_NL2SP \ -reload_flag \ -OBJDUMP \ -deplibs_check_method \ -file_magic_cmd \ -AR \ -AR_FLAGS \ -STRIP \ -RANLIB \ -CC \ -CFLAGS \ -compiler \ -lt_cv_sys_global_symbol_pipe \ -lt_cv_sys_global_symbol_to_cdecl \ -lt_cv_sys_global_symbol_to_c_name_address \ -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -SHELL \ -ECHO \ -lt_prog_compiler_no_builtin_flag \ -lt_prog_compiler_wl \ -lt_prog_compiler_pic \ -lt_prog_compiler_static \ -lt_cv_prog_compiler_c_o \ -need_locks \ -DSYMUTIL \ -NMEDIT \ -LIPO \ -OTOOL \ -OTOOL64 \ -shrext_cmds \ -export_dynamic_flag_spec \ -whole_archive_flag_spec \ -compiler_needs_object \ -with_gnu_ld \ -allow_undefined_flag \ -no_undefined_flag \ -hardcode_libdir_flag_spec \ -hardcode_libdir_flag_spec_ld \ -hardcode_libdir_separator \ -fix_srcfile_path \ -exclude_expsyms \ -include_expsyms \ -file_list_spec \ -variables_saved_for_relink \ -libname_spec \ -library_names_spec \ -soname_spec \ -finish_eval \ -old_striplib \ -striplib; do - case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in reload_cmds \ -old_postinstall_cmds \ -old_postuninstall_cmds \ -old_archive_cmds \ -extract_expsyms_cmds \ -old_archive_from_new_cmds \ -old_archive_from_expsyms_cmds \ -archive_cmds \ -archive_expsym_cmds \ -module_cmds \ -module_expsym_cmds \ -export_symbols_cmds \ -prelink_cmds \ -postinstall_cmds \ -postuninstall_cmds \ -finish_cmds \ -sys_lib_search_path_spec \ -sys_lib_dlsearch_path_spec; do - case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Fix-up fallback echo if it was mangled by the above quoting rules. -case \$lt_ECHO in -*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` - ;; -esac - -ac_aux_dir='$ac_aux_dir' -xsi_shell='$xsi_shell' -lt_shell_append='$lt_shell_append' - -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - - - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile' - - - - - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; - "applets/Makefile") CONFIG_FILES="$CONFIG_FILES applets/Makefile" ;; - "applets/brightness/Makefile") CONFIG_FILES="$CONFIG_FILES applets/brightness/Makefile" ;; - "applets/inhibit/Makefile") CONFIG_FILES="$CONFIG_FILES applets/inhibit/Makefile" ;; - "docs/Makefile") CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;; - "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;; - "help/Makefile") CONFIG_FILES="$CONFIG_FILES help/Makefile" ;; - "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; - "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; - "policy/Makefile") CONFIG_FILES="$CONFIG_FILES policy/Makefile" ;; - "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; - "data/mate-power-manager.desktop.in") CONFIG_FILES="$CONFIG_FILES data/mate-power-manager.desktop.in" ;; - "data/mate-power-preferences.desktop.in") CONFIG_FILES="$CONFIG_FILES data/mate-power-preferences.desktop.in" ;; - "data/mate-power-statistics.desktop.in") CONFIG_FILES="$CONFIG_FILES data/mate-power-statistics.desktop.in" ;; - "data/icons/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/Makefile" ;; - "data/icons/16x16/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/Makefile" ;; - "data/icons/16x16/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/actions/Makefile" ;; - "data/icons/16x16/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/apps/Makefile" ;; - "data/icons/16x16/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/status/Makefile" ;; - "data/icons/22x22/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/Makefile" ;; - "data/icons/22x22/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/actions/Makefile" ;; - "data/icons/22x22/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/apps/Makefile" ;; - "data/icons/22x22/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/status/Makefile" ;; - "data/icons/24x24/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/Makefile" ;; - "data/icons/24x24/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/actions/Makefile" ;; - "data/icons/24x24/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/apps/Makefile" ;; - "data/icons/24x24/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/status/Makefile" ;; - "data/icons/32x32/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/32x32/Makefile" ;; - "data/icons/32x32/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/32x32/actions/Makefile" ;; - "data/icons/32x32/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/32x32/apps/Makefile" ;; - "data/icons/32x32/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/32x32/status/Makefile" ;; - "data/icons/48x48/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/Makefile" ;; - "data/icons/48x48/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/actions/Makefile" ;; - "data/icons/48x48/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/apps/Makefile" ;; - "data/icons/48x48/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/status/Makefile" ;; - "data/icons/scalable/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/Makefile" ;; - "data/icons/scalable/actions/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/actions/Makefile" ;; - "data/icons/scalable/apps/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/apps/Makefile" ;; - "data/icons/scalable/status/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/status/Makefile" ;; - "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' <conf$$subs.awk | sed ' -/^[^""]/{ - N - s/\n// -} -' >>$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' <confdefs.h | sed ' -s/'"$ac_delim"'/"\\\ -"/g' >>$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - "libtool":C) - - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008 Free Software Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - - -# The names of the tagged configurations supported by this script. -available_tags="" - -# ### BEGIN LIBTOOL CONFIG - -# Which release of libtool.m4 was used? -macro_version=$macro_version -macro_revision=$macro_revision - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# What type of objects to build. -pic_mode=$pic_mode - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="\$SED -e 1s/^X//" - -# A grep program that handles long lines. -GREP=$lt_GREP - -# An ERE matcher. -EGREP=$lt_EGREP - -# A literal string matcher. -FGREP=$lt_FGREP - -# A BSD- or MS-compatible name lister. -NM=$lt_NM - -# Whether we need soft or hard links. -LN_S=$lt_LN_S - -# What is the maximum length of a command? -max_cmd_len=$max_cmd_len - -# Object file suffix (normally "o"). -objext=$ac_objext - -# Executable file suffix (normally ""). -exeext=$exeext - -# whether the shell understands "unset". -lt_unset=$lt_unset - -# turn spaces into newlines. -SP2NL=$lt_lt_SP2NL - -# turn newlines into spaces. -NL2SP=$lt_lt_NL2SP - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# An object symbol dumper. -OBJDUMP=$lt_OBJDUMP - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == "file_magic". -file_magic_cmd=$lt_file_magic_cmd - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A symbol stripping program. -STRIP=$lt_STRIP - -# Commands used to install an old-style archive. -RANLIB=$lt_RANLIB -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# A C compiler. -LTCC=$lt_CC - -# LTCC compiler flags. -LTCFLAGS=$lt_CFLAGS - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration. -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair. -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# Transform the output of nm in a C name address pair when lib prefix is needed. -global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that does not interpret backslashes. -ECHO=$lt_ECHO - -# Used to examine libraries when file_magic_cmd begins with "file". -MAGIC_CMD=$MAGIC_CMD - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Tool to manipulate archived DWARF debug symbol files on Mac OS X. -DSYMUTIL=$lt_DSYMUTIL - -# Tool to change global to local symbols on Mac OS X. -NMEDIT=$lt_NMEDIT - -# Tool to manipulate fat objects and archives on Mac OS X. -LIPO=$lt_LIPO - -# ldd/readelf like tool for Mach-O binaries on Mac OS X. -OTOOL=$lt_OTOOL - -# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. -OTOOL64=$lt_OTOOL64 - -# Old archive suffix (normally "a"). -libext=$libext - -# Shared library suffix (normally ".so"). -shrext_cmds=$lt_shrext_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at link time. -variables_saved_for_relink=$lt_variables_saved_for_relink - -# Do we need the "lib" prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Library versioning type. -version_type=$version_type - -# Shared library runtime path variable. -runpath_var=$runpath_var - -# Shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Command to use after installation of a shared archive. -postinstall_cmds=$lt_postinstall_cmds - -# Command to use after uninstallation of a shared archive. -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# As "finish_cmds", except a single script fragment to be evaled but -# not shown. -finish_eval=$lt_finish_eval - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Compile-time system search path for libraries. -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - - -# The linker used to build libraries. -LD=$lt_LD - -# Commands used to build an old-style archive. -old_archive_cmds=$lt_old_archive_cmds - -# A language specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU compiler? -with_gcc=$GCC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static. -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Whether the compiler copes with passing no objects directly. -compiler_needs_object=$lt_compiler_needs_object - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds - -# Commands used to build a loadable module if different from building -# a shared archive. -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Whether we are building with GNU ld or not. -with_gnu_ld=$lt_with_gnu_ld - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that enforces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# If ld is used when linking, flag to hardcode \$libdir into a binary -# during linking. This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld - -# Whether we need a single "-rpath" flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary. -hardcode_direct=$hardcode_direct - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the -# library is relocated. -hardcode_direct_absolute=$hardcode_direct_absolute - -# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -# into the resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -# into the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to "yes" if building a shared library automatically hardcodes DIR -# into the library and all subsequent libraries and executables linked -# against it. -hardcode_automatic=$hardcode_automatic - -# Set to yes if linker adds runtime paths of dependent libraries -# to runtime path list. -inherit_rpath=$inherit_rpath - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path - -# Set to "yes" if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# Commands necessary for linking programs (against libraries) with templates. -prelink_cmds=$lt_prelink_cmds - -# Specify filename containing input files. -file_list_spec=$lt_file_list_spec - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - -ltmain="$ac_aux_dir/ltmain.sh" - - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - case $xsi_shell in - yes) - cat << \_LT_EOF >> "$cfgfile" - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac -} - -# func_basename file -func_basename () -{ - func_basename_result="${1##*/}" -} - -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac - func_basename_result="${1##*/}" -} - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -func_stripname () -{ - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary parameter first. - func_stripname_result=${3} - func_stripname_result=${func_stripname_result#"${1}"} - func_stripname_result=${func_stripname_result%"${2}"} -} - -# func_opt_split -func_opt_split () -{ - func_opt_split_opt=${1%%=*} - func_opt_split_arg=${1#*=} -} - -# func_lo2o object -func_lo2o () -{ - case ${1} in - *.lo) func_lo2o_result=${1%.lo}.${objext} ;; - *) func_lo2o_result=${1} ;; - esac -} - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=${1%.*}.lo -} - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=$(( $* )) -} - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=${#1} -} - -_LT_EOF - ;; - *) # Bourne compatible functions. - cat << \_LT_EOF >> "$cfgfile" - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi -} - -# func_basename file -func_basename () -{ - func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -} - - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# func_strip_suffix prefix name -func_stripname () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "X${3}" \ - | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "X${3}" \ - | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; - esac -} - -# sed scripts: -my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' -my_sed_long_arg='1s/^-[^=]*=//' - -# func_opt_split -func_opt_split () -{ - func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` - func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` -} - -# func_lo2o object -func_lo2o () -{ - func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` -} - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` -} - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=`expr "$@"` -} - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` -} - -_LT_EOF -esac - -case $lt_shell_append in - yes) - cat << \_LT_EOF >> "$cfgfile" - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "$1+=\$2" -} -_LT_EOF - ;; - *) - cat << \_LT_EOF >> "$cfgfile" - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "$1=\$$1\$2" -} - -_LT_EOF - ;; - esac - - - sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - - ;; - "default-1":C) case "$CONFIG_FILES" in *po/Makefile.in*) - sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile - esac ;; - "po/stamp-it":C) - if ! grep "^# INTLTOOL_MAKEFILE$" "po/Makefile.in" > /dev/null ; then - as_fn_error $? "po/Makefile.in.in was not created by intltoolize." "$LINENO" 5 - fi - rm -f "po/stamp-it" "po/stamp-it.tmp" "po/POTFILES" "po/Makefile.tmp" - >"po/stamp-it.tmp" - sed '/^#/d - s/^[[].*] *// - /^[ ]*$/d - '"s|^| $ac_top_srcdir/|" \ - "$srcdir/po/POTFILES.in" | sed '$!s/$/ \\/' >"po/POTFILES" - - sed '/^POTFILES =/,/[^\\]$/ { - /^POTFILES =/!d - r po/POTFILES - } - ' "po/Makefile.in" >"po/Makefile" - rm -f "po/Makefile.tmp" - mv "po/stamp-it.tmp" "po/stamp-it" - ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - - -echo " - MATE Power Manager $VERSION - ============================= - - prefix: ${prefix} - datadir: ${datadir} - compiler: ${CC} - cflags: ${CFLAGS} - Building extra applets: ${enable_applets} - Self test support: ${have_tests} - MateConf default support: ${have_mateconfdefaults} - Docbook support: ${enable_docbook_docs} - documentation dir: $DOCDIR - dbus-1 services dir: $DBUS_SERVICES_DIR - mateconf-schema dir: $MATECONF_SCHEMA_FILE_DIR -" -if [ "${prefix}" != "/usr" ] ; then - echo ' -WARNING!!! MATE Power Manager uses the "pkexec" utility to provide root -permissions necessary for the "mate-power-backlight-helper" executable to run. - -A link should be provided from the file -"/usr/share/polkit-1/actions/org.mate.power.policy" to the installed version -"${prefix}/share/polkit-1/actions/org.mate.power.policy" after installation. -' -fi - diff --git a/data/Makefile.in b/data/Makefile.in deleted file mode 100644 index ae41f01..0000000 --- a/data/Makefile.in +++ /dev/null @@ -1,834 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(srcdir)/mate-power-manager.desktop.in.in \ - $(srcdir)/mate-power-preferences.desktop.in.in \ - $(srcdir)/mate-power-statistics.desktop.in.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = mate-power-manager.desktop.in \ - mate-power-preferences.desktop.in \ - mate-power-statistics.desktop.in -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(autostartdir)" \ - "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(pkgdatadir)" \ - "$(DESTDIR)$(schemadir)" "$(DESTDIR)$(servicedir)" -DATA = $(autostart_DATA) $(desktop_DATA) $(pkgdata_DATA) \ - $(schema_DATA) $(service_DATA) -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = icons -schemadir = $(sysconfdir)/mateconf/schemas -schema_in_files = mate-power-manager.schemas.in -schema_DATA = $(schema_in_files:.schemas.in=.schemas) -desktopdir = $(datadir)/applications -desktop_in_files = mate-power-preferences.desktop.in \ - mate-power-statistics.desktop.in - -desktop_DATA = $(desktop_in_files:.desktop.in=.desktop) -autostartdir = $(sysconfdir)/xdg/autostart -autostart_in_files = mate-power-manager.desktop.in -autostart_DATA = $(autostart_in_files:.desktop.in=.desktop) -servicedir = $(DBUS_SERVICES_DIR) -service_in_files = mate-power-manager.service.in -service_DATA = $(service_in_files:.service.in=.service) -pkgdata_DATA = \ - gpm-statistics.ui \ - gpm-feedback-widget.ui \ - gpm-prefs.ui \ - acme.ui - -EXTRA_DIST = \ - mate-power-manager.schemas.in \ - $(schema_in_files) \ - $(desktop_in_files) \ - $(autostart_in_files) \ - $(service_in_files) \ - $(pkgdata_DATA) - -DISTCLEANFILES = \ - mate-power-manager.desktop \ - mate-power-preferences.desktop \ - mate-power-statistics.desktop \ - mate-power-manager.schemas \ - mate-power-manager.service - -all: all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -mate-power-manager.desktop.in: $(top_builddir)/config.status $(srcdir)/mate-power-manager.desktop.in.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ -mate-power-preferences.desktop.in: $(top_builddir)/config.status $(srcdir)/mate-power-preferences.desktop.in.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ -mate-power-statistics.desktop.in: $(top_builddir)/config.status $(srcdir)/mate-power-statistics.desktop.in.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-autostartDATA: $(autostart_DATA) - @$(NORMAL_INSTALL) - test -z "$(autostartdir)" || $(MKDIR_P) "$(DESTDIR)$(autostartdir)" - @list='$(autostart_DATA)'; test -n "$(autostartdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autostartdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(autostartdir)" || exit $$?; \ - done - -uninstall-autostartDATA: - @$(NORMAL_UNINSTALL) - @list='$(autostart_DATA)'; test -n "$(autostartdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(autostartdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(autostartdir)" && rm -f $$files -install-desktopDATA: $(desktop_DATA) - @$(NORMAL_INSTALL) - test -z "$(desktopdir)" || $(MKDIR_P) "$(DESTDIR)$(desktopdir)" - @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktopdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(desktopdir)" || exit $$?; \ - done - -uninstall-desktopDATA: - @$(NORMAL_UNINSTALL) - @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(desktopdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(desktopdir)" && rm -f $$files -install-pkgdataDATA: $(pkgdata_DATA) - @$(NORMAL_INSTALL) - test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" - @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \ - done - -uninstall-pkgdataDATA: - @$(NORMAL_UNINSTALL) - @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(pkgdatadir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(pkgdatadir)" && rm -f $$files -install-schemaDATA: $(schema_DATA) - @$(NORMAL_INSTALL) - test -z "$(schemadir)" || $(MKDIR_P) "$(DESTDIR)$(schemadir)" - @list='$(schema_DATA)'; test -n "$(schemadir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(schemadir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(schemadir)" || exit $$?; \ - done - -uninstall-schemaDATA: - @$(NORMAL_UNINSTALL) - @list='$(schema_DATA)'; test -n "$(schemadir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(schemadir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(schemadir)" && rm -f $$files -install-serviceDATA: $(service_DATA) - @$(NORMAL_INSTALL) - test -z "$(servicedir)" || $(MKDIR_P) "$(DESTDIR)$(servicedir)" - @list='$(service_DATA)'; test -n "$(servicedir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(servicedir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(servicedir)" || exit $$?; \ - done - -uninstall-serviceDATA: - @$(NORMAL_UNINSTALL) - @list='$(service_DATA)'; test -n "$(servicedir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(servicedir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(servicedir)" && rm -f $$files - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile $(DATA) -installdirs: installdirs-recursive -installdirs-am: - for dir in "$(DESTDIR)$(autostartdir)" "$(DESTDIR)$(desktopdir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(schemadir)" "$(DESTDIR)$(servicedir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -@MATECONF_SCHEMAS_INSTALL_FALSE@uninstall-local: -@MATECONF_SCHEMAS_INSTALL_FALSE@install-data-local: -clean: clean-recursive - -clean-am: clean-generic clean-libtool clean-local mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: install-autostartDATA install-data-local \ - install-desktopDATA install-pkgdataDATA install-schemaDATA \ - install-serviceDATA - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: uninstall-autostartDATA uninstall-desktopDATA \ - uninstall-local uninstall-pkgdataDATA uninstall-schemaDATA \ - uninstall-serviceDATA - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ - install-am install-strip tags-recursive - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic clean-libtool \ - clean-local ctags ctags-recursive distclean distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-autostartDATA \ - install-data install-data-am install-data-local \ - install-desktopDATA install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-pkgdataDATA install-ps install-ps-am \ - install-schemaDATA install-serviceDATA install-strip \ - installcheck installcheck-am installdirs installdirs-am \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-recursive uninstall uninstall-am \ - uninstall-autostartDATA uninstall-desktopDATA uninstall-local \ - uninstall-pkgdataDATA uninstall-schemaDATA \ - uninstall-serviceDATA - - -@INTLTOOL_SCHEMAS_RULE@ - -@INTLTOOL_DESKTOP_RULE@ - -@INTLTOOL_DESKTOP_RULE@ - -$(service_DATA): $(service_in_files) Makefile - @sed -e "s|\@servicedir\@|$(bindir)|" $< > $@ - -@MATECONF_SCHEMAS_INSTALL_TRUE@install-data-local: -@MATECONF_SCHEMAS_INSTALL_TRUE@ -MATECONF_CONFIG_SOURCE=$(MATECONF_SCHEMA_CONFIG_SOURCE) \ -@MATECONF_SCHEMAS_INSTALL_TRUE@ $(MATECONFTOOL) --makefile-install-rule $(schema_DATA) - -@MATECONF_SCHEMAS_INSTALL_TRUE@uninstall-local: -@MATECONF_SCHEMAS_INSTALL_TRUE@ -MATECONF_CONFIG_SOURCE=$(MATECONF_SCHEMA_CONFIG_SOURCE) \ -@MATECONF_SCHEMAS_INSTALL_TRUE@ $(MATECONFTOOL) --makefile-uninstall-rule $(schema_DATA) - -clean-local : - rm -f *~ - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/16x16/Makefile.in b/data/icons/16x16/Makefile.in deleted file mode 100644 index b0421f5..0000000 --- a/data/icons/16x16/Makefile.in +++ /dev/null @@ -1,626 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/16x16 -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = actions apps status -all: all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/16x16/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/16x16/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ - install-am install-strip tags-recursive - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic clean-libtool \ - ctags ctags-recursive distclean distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/16x16/actions/Makefile.in b/data/icons/16x16/actions/Makefile.in deleted file mode 100644 index a68338a..0000000 --- a/data/icons/16x16/actions/Makefile.in +++ /dev/null @@ -1,484 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/16x16/actions -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(pkgdatadir)/icons/hicolor -size = 16x16 -context = actions -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - gpm-hibernate.png \ - gpm-suspend.png - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/16x16/actions/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/16x16/actions/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/16x16/apps/Makefile.in b/data/icons/16x16/apps/Makefile.in deleted file mode 100644 index 7234ffb..0000000 --- a/data/icons/16x16/apps/Makefile.in +++ /dev/null @@ -1,486 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/16x16/apps -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(datadir)/icons/hicolor -size = 16x16 -context = apps -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - mate-brightness-applet.png \ - mate-inhibit-applet.png \ - mate-power-manager.png \ - mate-power-statistics.png - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/16x16/apps/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/16x16/apps/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/16x16/status/Makefile.in b/data/icons/16x16/status/Makefile.in deleted file mode 100644 index 79f299f..0000000 --- a/data/icons/16x16/status/Makefile.in +++ /dev/null @@ -1,537 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/16x16/status -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(pkgdatadir)/icons/hicolor -size = 16x16 -context = status -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - gpm-ac-adapter.png \ - gpm-brightness-lcd.png \ - gpm-brightness-kbd.png \ - gpm-brightness-lcd-disabled.png \ - gpm-brightness-kbd-disabled.png \ - gpm-brightness-lcd-invalid.png \ - gpm-brightness-kbd-invalid.png \ - gpm-inhibit.png \ - gpm-inhibit-invalid.png \ - gpm-keyboard-000.png \ - gpm-keyboard-020.png \ - gpm-keyboard-040.png \ - gpm-keyboard-060.png \ - gpm-keyboard-080.png \ - gpm-keyboard-100.png \ - gpm-phone-000.png \ - gpm-phone-020.png \ - gpm-phone-040.png \ - gpm-phone-060.png \ - gpm-phone-080.png \ - gpm-phone-100.png \ - gpm-mouse-000.png \ - gpm-mouse-020.png \ - gpm-mouse-040.png \ - gpm-mouse-060.png \ - gpm-mouse-080.png \ - gpm-mouse-100.png \ - gpm-battery-000.png \ - gpm-battery-020.png \ - gpm-battery-040.png \ - gpm-battery-060.png \ - gpm-battery-080.png \ - gpm-battery-100.png \ - gpm-battery-000-charging.png \ - gpm-battery-020-charging.png \ - gpm-battery-040-charging.png \ - gpm-battery-060-charging.png \ - gpm-battery-080-charging.png \ - gpm-battery-100-charging.png \ - gpm-battery-missing.png \ - gpm-battery-charged.png \ - gpm-battery-empty.png \ - gpm-ups-000.png \ - gpm-ups-020.png \ - gpm-ups-040.png \ - gpm-ups-060.png \ - gpm-ups-080.png \ - gpm-ups-100.png \ - gpm-ups-000-charging.png \ - gpm-ups-020-charging.png \ - gpm-ups-040-charging.png \ - gpm-ups-060-charging.png \ - gpm-ups-080-charging.png \ - gpm-ups-100-charging.png \ - gpm-ups-missing.png - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/16x16/status/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/16x16/status/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/22x22/Makefile.in b/data/icons/22x22/Makefile.in deleted file mode 100644 index fb52a49..0000000 --- a/data/icons/22x22/Makefile.in +++ /dev/null @@ -1,626 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/22x22 -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = actions apps status -all: all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/22x22/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/22x22/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ - install-am install-strip tags-recursive - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic clean-libtool \ - ctags ctags-recursive distclean distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/22x22/actions/Makefile.in b/data/icons/22x22/actions/Makefile.in deleted file mode 100644 index 63cfd5d..0000000 --- a/data/icons/22x22/actions/Makefile.in +++ /dev/null @@ -1,484 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/22x22/actions -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(pkgdatadir)/icons/hicolor -size = 22x22 -context = actions -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - gpm-hibernate.png \ - gpm-suspend.png - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/22x22/actions/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/22x22/actions/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/22x22/apps/Makefile.in b/data/icons/22x22/apps/Makefile.in deleted file mode 100644 index b2ea484..0000000 --- a/data/icons/22x22/apps/Makefile.in +++ /dev/null @@ -1,486 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/22x22/apps -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(datadir)/icons/hicolor -size = 22x22 -context = apps -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - mate-brightness-applet.png \ - mate-inhibit-applet.png \ - mate-power-manager.png \ - mate-power-statistics.png - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/22x22/apps/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/22x22/apps/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/22x22/status/Makefile.in b/data/icons/22x22/status/Makefile.in deleted file mode 100644 index fe74ba0..0000000 --- a/data/icons/22x22/status/Makefile.in +++ /dev/null @@ -1,537 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/22x22/status -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(pkgdatadir)/icons/hicolor -size = 22x22 -context = status -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - gpm-ac-adapter.png \ - gpm-brightness-lcd.png \ - gpm-brightness-kbd.png \ - gpm-brightness-lcd-disabled.png \ - gpm-brightness-kbd-disabled.png \ - gpm-brightness-lcd-invalid.png \ - gpm-brightness-kbd-invalid.png \ - gpm-inhibit.png \ - gpm-inhibit-invalid.png \ - gpm-keyboard-000.png \ - gpm-keyboard-020.png \ - gpm-keyboard-040.png \ - gpm-keyboard-060.png \ - gpm-keyboard-080.png \ - gpm-keyboard-100.png \ - gpm-phone-000.png \ - gpm-phone-020.png \ - gpm-phone-040.png \ - gpm-phone-060.png \ - gpm-phone-080.png \ - gpm-phone-100.png \ - gpm-mouse-000.png \ - gpm-mouse-020.png \ - gpm-mouse-040.png \ - gpm-mouse-060.png \ - gpm-mouse-080.png \ - gpm-mouse-100.png \ - gpm-battery-000.png \ - gpm-battery-020.png \ - gpm-battery-040.png \ - gpm-battery-060.png \ - gpm-battery-080.png \ - gpm-battery-100.png \ - gpm-battery-000-charging.png \ - gpm-battery-020-charging.png \ - gpm-battery-040-charging.png \ - gpm-battery-060-charging.png \ - gpm-battery-080-charging.png \ - gpm-battery-100-charging.png \ - gpm-battery-missing.png \ - gpm-battery-charged.png \ - gpm-battery-empty.png \ - gpm-ups-000.png \ - gpm-ups-020.png \ - gpm-ups-040.png \ - gpm-ups-060.png \ - gpm-ups-080.png \ - gpm-ups-100.png \ - gpm-ups-000-charging.png \ - gpm-ups-020-charging.png \ - gpm-ups-040-charging.png \ - gpm-ups-060-charging.png \ - gpm-ups-080-charging.png \ - gpm-ups-100-charging.png \ - gpm-ups-missing.png - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/22x22/status/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/22x22/status/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/24x24/Makefile.in b/data/icons/24x24/Makefile.in deleted file mode 100644 index e5d06a9..0000000 --- a/data/icons/24x24/Makefile.in +++ /dev/null @@ -1,626 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/24x24 -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = actions apps status -all: all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/24x24/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/24x24/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ - install-am install-strip tags-recursive - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic clean-libtool \ - ctags ctags-recursive distclean distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/24x24/actions/Makefile.in b/data/icons/24x24/actions/Makefile.in deleted file mode 100644 index aadd879..0000000 --- a/data/icons/24x24/actions/Makefile.in +++ /dev/null @@ -1,484 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/24x24/actions -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(pkgdatadir)/icons/hicolor -size = 24x24 -context = actions -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - gpm-hibernate.png \ - gpm-suspend.png - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/24x24/actions/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/24x24/actions/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/24x24/apps/Makefile.in b/data/icons/24x24/apps/Makefile.in deleted file mode 100644 index 16fc48a..0000000 --- a/data/icons/24x24/apps/Makefile.in +++ /dev/null @@ -1,486 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/24x24/apps -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(datadir)/icons/hicolor -size = 24x24 -context = apps -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - mate-brightness-applet.png \ - mate-inhibit-applet.png \ - mate-power-manager.png \ - mate-power-statistics.png - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/24x24/apps/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/24x24/apps/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/24x24/status/Makefile.in b/data/icons/24x24/status/Makefile.in deleted file mode 100644 index 1f7036f..0000000 --- a/data/icons/24x24/status/Makefile.in +++ /dev/null @@ -1,537 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/24x24/status -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(pkgdatadir)/icons/hicolor -size = 24x24 -context = status -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - gpm-ac-adapter.png \ - gpm-brightness-lcd.png \ - gpm-brightness-kbd.png \ - gpm-brightness-lcd-disabled.png \ - gpm-brightness-kbd-disabled.png \ - gpm-brightness-lcd-invalid.png \ - gpm-brightness-kbd-invalid.png \ - gpm-inhibit.png \ - gpm-inhibit-invalid.png \ - gpm-keyboard-000.png \ - gpm-keyboard-020.png \ - gpm-keyboard-040.png \ - gpm-keyboard-060.png \ - gpm-keyboard-080.png \ - gpm-keyboard-100.png \ - gpm-phone-000.png \ - gpm-phone-020.png \ - gpm-phone-040.png \ - gpm-phone-060.png \ - gpm-phone-080.png \ - gpm-phone-100.png \ - gpm-mouse-000.png \ - gpm-mouse-020.png \ - gpm-mouse-040.png \ - gpm-mouse-060.png \ - gpm-mouse-080.png \ - gpm-mouse-100.png \ - gpm-battery-000.png \ - gpm-battery-020.png \ - gpm-battery-040.png \ - gpm-battery-060.png \ - gpm-battery-080.png \ - gpm-battery-100.png \ - gpm-battery-000-charging.png \ - gpm-battery-020-charging.png \ - gpm-battery-040-charging.png \ - gpm-battery-060-charging.png \ - gpm-battery-080-charging.png \ - gpm-battery-100-charging.png \ - gpm-battery-missing.png \ - gpm-battery-charged.png \ - gpm-battery-empty.png \ - gpm-ups-000.png \ - gpm-ups-020.png \ - gpm-ups-040.png \ - gpm-ups-060.png \ - gpm-ups-080.png \ - gpm-ups-100.png \ - gpm-ups-000-charging.png \ - gpm-ups-020-charging.png \ - gpm-ups-040-charging.png \ - gpm-ups-060-charging.png \ - gpm-ups-080-charging.png \ - gpm-ups-100-charging.png \ - gpm-ups-missing.png - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/24x24/status/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/24x24/status/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/32x32/Makefile.in b/data/icons/32x32/Makefile.in deleted file mode 100644 index 31dcc27..0000000 --- a/data/icons/32x32/Makefile.in +++ /dev/null @@ -1,626 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/32x32 -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = actions apps status -all: all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/32x32/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/32x32/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ - install-am install-strip tags-recursive - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic clean-libtool \ - ctags ctags-recursive distclean distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/32x32/actions/Makefile.in b/data/icons/32x32/actions/Makefile.in deleted file mode 100644 index 8bffaf6..0000000 --- a/data/icons/32x32/actions/Makefile.in +++ /dev/null @@ -1,484 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/32x32/actions -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(pkgdatadir)/icons/hicolor -size = 32x32 -context = actions -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - gpm-hibernate.png \ - gpm-suspend.png - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/32x32/actions/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/32x32/actions/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/32x32/apps/Makefile.in b/data/icons/32x32/apps/Makefile.in deleted file mode 100644 index 535b98e..0000000 --- a/data/icons/32x32/apps/Makefile.in +++ /dev/null @@ -1,486 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/32x32/apps -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(datadir)/icons/hicolor -size = 32x32 -context = apps -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - mate-brightness-applet.png \ - mate-inhibit-applet.png \ - mate-power-manager.png \ - mate-power-statistics.png - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/32x32/apps/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/32x32/apps/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/32x32/status/Makefile.in b/data/icons/32x32/status/Makefile.in deleted file mode 100644 index a7796da..0000000 --- a/data/icons/32x32/status/Makefile.in +++ /dev/null @@ -1,537 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/32x32/status -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(pkgdatadir)/icons/hicolor -size = 32x32 -context = status -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - gpm-ac-adapter.png \ - gpm-brightness-lcd.png \ - gpm-brightness-kbd.png \ - gpm-brightness-lcd-disabled.png \ - gpm-brightness-kbd-disabled.png \ - gpm-brightness-lcd-invalid.png \ - gpm-brightness-kbd-invalid.png \ - gpm-inhibit.png \ - gpm-inhibit-invalid.png \ - gpm-keyboard-000.png \ - gpm-keyboard-020.png \ - gpm-keyboard-040.png \ - gpm-keyboard-060.png \ - gpm-keyboard-080.png \ - gpm-keyboard-100.png \ - gpm-phone-000.png \ - gpm-phone-020.png \ - gpm-phone-040.png \ - gpm-phone-060.png \ - gpm-phone-080.png \ - gpm-phone-100.png \ - gpm-mouse-000.png \ - gpm-mouse-020.png \ - gpm-mouse-040.png \ - gpm-mouse-060.png \ - gpm-mouse-080.png \ - gpm-mouse-100.png \ - gpm-battery-000.png \ - gpm-battery-020.png \ - gpm-battery-040.png \ - gpm-battery-060.png \ - gpm-battery-080.png \ - gpm-battery-100.png \ - gpm-battery-000-charging.png \ - gpm-battery-020-charging.png \ - gpm-battery-040-charging.png \ - gpm-battery-060-charging.png \ - gpm-battery-080-charging.png \ - gpm-battery-100-charging.png \ - gpm-battery-missing.png \ - gpm-battery-charged.png \ - gpm-battery-empty.png \ - gpm-ups-000.png \ - gpm-ups-020.png \ - gpm-ups-040.png \ - gpm-ups-060.png \ - gpm-ups-080.png \ - gpm-ups-100.png \ - gpm-ups-000-charging.png \ - gpm-ups-020-charging.png \ - gpm-ups-040-charging.png \ - gpm-ups-060-charging.png \ - gpm-ups-080-charging.png \ - gpm-ups-100-charging.png \ - gpm-ups-missing.png - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/32x32/status/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/32x32/status/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/48x48/Makefile.in b/data/icons/48x48/Makefile.in deleted file mode 100644 index 1abc807..0000000 --- a/data/icons/48x48/Makefile.in +++ /dev/null @@ -1,626 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/48x48 -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = actions apps status -all: all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/48x48/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/48x48/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ - install-am install-strip tags-recursive - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic clean-libtool \ - ctags ctags-recursive distclean distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/48x48/actions/Makefile.in b/data/icons/48x48/actions/Makefile.in deleted file mode 100644 index eb0d19c..0000000 --- a/data/icons/48x48/actions/Makefile.in +++ /dev/null @@ -1,484 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/48x48/actions -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(pkgdatadir)/icons/hicolor -size = 48x48 -context = actions -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - gpm-hibernate.png \ - gpm-suspend.png - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/48x48/actions/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/48x48/actions/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/48x48/apps/Makefile.in b/data/icons/48x48/apps/Makefile.in deleted file mode 100644 index 0b5f389..0000000 --- a/data/icons/48x48/apps/Makefile.in +++ /dev/null @@ -1,486 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/48x48/apps -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(datadir)/icons/hicolor -size = 48x48 -context = apps -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - mate-brightness-applet.png \ - mate-inhibit-applet.png \ - mate-power-manager.png \ - mate-power-statistics.png - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/48x48/apps/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/48x48/apps/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/48x48/status/Makefile.in b/data/icons/48x48/status/Makefile.in deleted file mode 100644 index 83a9d20..0000000 --- a/data/icons/48x48/status/Makefile.in +++ /dev/null @@ -1,538 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/48x48/status -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(pkgdatadir)/icons/hicolor -size = 48x48 -context = status -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - gpm-ac-adapter.png \ - gpm-brightness-lcd.png \ - gpm-brightness-kbd.png \ - gpm-brightness-lcd-disabled.png \ - gpm-brightness-kbd-disabled.png \ - gpm-brightness-lcd-invalid.png \ - gpm-brightness-kbd-invalid.png \ - gpm-monitor.png \ - gpm-inhibit.png \ - gpm-inhibit-invalid.png \ - gpm-keyboard-000.png \ - gpm-keyboard-020.png \ - gpm-keyboard-040.png \ - gpm-keyboard-060.png \ - gpm-keyboard-080.png \ - gpm-keyboard-100.png \ - gpm-phone-000.png \ - gpm-phone-020.png \ - gpm-phone-040.png \ - gpm-phone-060.png \ - gpm-phone-080.png \ - gpm-phone-100.png \ - gpm-mouse-000.png \ - gpm-mouse-020.png \ - gpm-mouse-040.png \ - gpm-mouse-060.png \ - gpm-mouse-080.png \ - gpm-mouse-100.png \ - gpm-battery-000.png \ - gpm-battery-020.png \ - gpm-battery-040.png \ - gpm-battery-060.png \ - gpm-battery-080.png \ - gpm-battery-100.png \ - gpm-battery-000-charging.png \ - gpm-battery-020-charging.png \ - gpm-battery-040-charging.png \ - gpm-battery-060-charging.png \ - gpm-battery-080-charging.png \ - gpm-battery-100-charging.png \ - gpm-battery-missing.png \ - gpm-battery-charged.png \ - gpm-battery-empty.png \ - gpm-ups-000.png \ - gpm-ups-020.png \ - gpm-ups-040.png \ - gpm-ups-060.png \ - gpm-ups-080.png \ - gpm-ups-100.png \ - gpm-ups-000-charging.png \ - gpm-ups-020-charging.png \ - gpm-ups-040-charging.png \ - gpm-ups-060-charging.png \ - gpm-ups-080-charging.png \ - gpm-ups-100-charging.png \ - gpm-ups-missing.png - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/48x48/status/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/48x48/status/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/Makefile.in b/data/icons/Makefile.in deleted file mode 100644 index 257ebbe..0000000 --- a/data/icons/Makefile.in +++ /dev/null @@ -1,641 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = scalable 16x16 22x22 24x24 32x32 48x48 -gtk_update_icon_cache = gtk-update-icon-cache -f -t $(pkgdatadir)/icons/hicolor -all: all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-data-hook -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) uninstall-hook -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ - install-am install-data-am install-strip tags-recursive \ - uninstall-am - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic clean-libtool \ - ctags ctags-recursive distclean distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-data-hook install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs installdirs-am \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-recursive uninstall uninstall-am uninstall-hook - - -install-data-hook: update-icon-cache -uninstall-hook: update-icon-cache -update-icon-cache: - @-if test -z "$(DESTDIR)"; then \ - echo "Updating Gtk icon cache."; \ - $(gtk_update_icon_cache); \ - else \ - echo "*** Icon cache not updated. After (un)install, run this:"; \ - echo "*** $(gtk_update_icon_cache)"; \ - fi - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/scalable/Makefile.in b/data/icons/scalable/Makefile.in deleted file mode 100644 index 17a6eb7..0000000 --- a/data/icons/scalable/Makefile.in +++ /dev/null @@ -1,626 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/scalable -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = actions apps status -all: all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/scalable/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/scalable/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ - install-am install-strip tags-recursive - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic clean-libtool \ - ctags ctags-recursive distclean distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/scalable/actions/Makefile.in b/data/icons/scalable/actions/Makefile.in deleted file mode 100644 index 823c81d..0000000 --- a/data/icons/scalable/actions/Makefile.in +++ /dev/null @@ -1,484 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/scalable/actions -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(pkgdatadir)/icons/hicolor -size = scalable -context = actions -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - gpm-hibernate.svg \ - gpm-suspend.svg - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/scalable/actions/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/scalable/actions/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/scalable/apps/Makefile.in b/data/icons/scalable/apps/Makefile.in deleted file mode 100644 index 985bc5b..0000000 --- a/data/icons/scalable/apps/Makefile.in +++ /dev/null @@ -1,486 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/scalable/apps -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(datadir)/icons/hicolor -size = scalable -context = apps -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - mate-brightness-applet.svg \ - mate-inhibit-applet.svg \ - mate-power-manager.svg \ - mate-power-statistics.svg - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/scalable/apps/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/scalable/apps/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/data/icons/scalable/status/Makefile.in b/data/icons/scalable/status/Makefile.in deleted file mode 100644 index 52f5fee..0000000 --- a/data/icons/scalable/status/Makefile.in +++ /dev/null @@ -1,529 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = data/icons/scalable/status -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(iconsdir)" -DATA = $(icons_DATA) $(noinst_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -themedir = $(pkgdatadir)/icons/hicolor -size = scalable -context = status -iconsdir = $(themedir)/$(size)/$(context) -icons_DATA = \ - gpm-ac-adapter.svg \ - gpm-brightness-lcd.svg \ - gpm-brightness-kbd.svg \ - gpm-brightness-lcd-disabled.svg \ - gpm-brightness-kbd-disabled.svg \ - gpm-brightness-lcd-invalid.svg \ - gpm-brightness-kbd-invalid.svg \ - gpm-monitor.svg \ - gpm-inhibit.svg \ - gpm-inhibit-invalid.svg \ - gpm-keyboard-000.svg \ - gpm-keyboard-060.svg \ - gpm-keyboard-100.svg \ - gpm-phone-000.svg \ - gpm-phone-060.svg \ - gpm-phone-100.svg \ - gpm-mouse-000.svg \ - gpm-mouse-060.svg \ - gpm-mouse-100.svg \ - gpm-battery-000.svg \ - gpm-battery-020.svg \ - gpm-battery-040.svg \ - gpm-battery-060.svg \ - gpm-battery-080.svg \ - gpm-battery-100.svg \ - gpm-battery-000-charging.svg \ - gpm-battery-020-charging.svg \ - gpm-battery-040-charging.svg \ - gpm-battery-060-charging.svg \ - gpm-battery-080-charging.svg \ - gpm-battery-100-charging.svg \ - gpm-battery-missing.svg \ - gpm-battery-charged.svg \ - gpm-battery-empty.svg \ - gpm-ups-000.svg \ - gpm-ups-020.svg \ - gpm-ups-040.svg \ - gpm-ups-060.svg \ - gpm-ups-080.svg \ - gpm-ups-100.svg \ - gpm-ups-000-charging.svg \ - gpm-ups-020-charging.svg \ - gpm-ups-040-charging.svg \ - gpm-ups-060-charging.svg \ - gpm-ups-080-charging.svg \ - gpm-ups-100-charging.svg \ - gpm-ups-missing.svg - -noinst_DATA = -EXTRA_DIST = \ - $(icons_DATA) \ - $(noinst_DATA) - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/scalable/status/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign data/icons/scalable/status/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-iconsDATA: $(icons_DATA) - @$(NORMAL_INSTALL) - test -z "$(iconsdir)" || $(MKDIR_P) "$(DESTDIR)$(iconsdir)" - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(iconsdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(iconsdir)" || exit $$?; \ - done - -uninstall-iconsDATA: - @$(NORMAL_UNINSTALL) - @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(iconsdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(iconsdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(iconsdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-iconsDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-iconsDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-iconsDATA install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-iconsDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/depcomp b/depcomp deleted file mode 100755 index df8eea7..0000000 --- a/depcomp +++ /dev/null @@ -1,630 +0,0 @@ -#! /bin/sh -# depcomp - compile a program generating dependencies as side-effects - -scriptversion=2009-04-28.21; # UTC - -# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free -# Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva <[email protected]>. - -case $1 in - '') - echo "$0: No command. Try \`$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: depcomp [--help] [--version] PROGRAM [ARGS] - -Run PROGRAMS ARGS to compile a file, generating dependencies -as side-effects. - -Environment variables: - depmode Dependency tracking mode. - source Source file read by `PROGRAMS ARGS'. - object Object file output by `PROGRAMS ARGS'. - DEPDIR directory where to store dependencies. - depfile Dependency file to output. - tmpdepfile Temporary file to use when outputing dependencies. - libtool Whether libtool is used (yes/no). - -Report bugs to <[email protected]>. -EOF - exit $? - ;; - -v | --v*) - echo "depcomp $scriptversion" - exit $? - ;; -esac - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi - -# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. -depfile=${depfile-`echo "$object" | - sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -cygpath_u="cygpath -u -f -" -if test "$depmode" = msvcmsys; then - # This is just like msvisualcpp but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u="sed s,\\\\\\\\,/,g" - depmode=msvisualcpp -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. -## Unfortunately, FreeBSD c89 acceptance of flags depends upon -## the command line argument order; so add the flags where they -## appear in depend2.am. Note that the slowdown incurred here -## affects only configure: in makefiles, %FASTDEP% shortcuts this. - for arg - do - case $arg in - -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; - *) set fnord "$@" "$arg" ;; - esac - shift # fnord - shift # $arg - done - "$@" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -## The second -e expression handles DOS-style file names with drive letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory -## that the space means something, we add a space to the output as -## well. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the - # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> "$depfile" - echo >> "$depfile" - - # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts `$object:' at the - # start of each line; $object doesn't have directory information. - # Version 6 uses the directory in both cases. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.u - tmpdepfile2=$base.u - tmpdepfile3=$dir.libs/$base.u - "$@" -Wc,-M - else - tmpdepfile1=$dir$base.u - tmpdepfile2=$dir$base.u - tmpdepfile3=$dir$base.u - "$@" -M - fi - stat=$? - - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - # Each line is of the form `foo.o: dependent.h'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -icc) - # Intel's C compiler understands `-MD -MF file'. However on - # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c - # ICC 7.0 will fill foo.d with something like - # foo.o: sub/foo.c - # foo.o: sub/foo.h - # which is wrong. We want: - # sub/foo.o: sub/foo.c - # sub/foo.o: sub/foo.h - # sub/foo.c: - # sub/foo.h: - # ICC 7.1 will output - # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using \ : - # foo.o: sub/foo.c ... \ - # sub/foo.h ... \ - # ... - - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | - sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp2) - # The "hp" stanza above does not work with aCC (C++) and HP's ia64 - # compilers, which have integrated preprocessors. The correct option - # to use with these is +Maked; it writes dependencies to a file named - # 'foo.d', which lands next to the object file, wherever that - # happens to be. - # Much of this is similar to the tru64 case; see comments there. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir.libs/$base.d - "$@" -Wc,+Maked - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - "$@" +Maked - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" - # Add `dependent.h:' lines. - sed -ne '2,${ - s/^ *// - s/ \\*$// - s/$/:/ - p - }' "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" "$tmpdepfile2" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. - # Subdirectories are respected. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - - if test "$libtool" = yes; then - # With Tru64 cc, shared objects can also be used to make a - # static library. This mechanism is used in libtool 1.4 series to - # handle both shared and static libraries in a single compilation. - # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. - # - # With libtool 1.5 this exception was removed, and libtool now - # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 - tmpdepfile2=$dir$base.o.d # libtool 1.5 - tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 - tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.o.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - tmpdepfile4=$dir$base.d - "$@" -MD - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for `:' - # in the target name. This is to cope with DOS-style filenames: - # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. - "$@" $dashmflag | - sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # Remove any Libtool call - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - # X makedepend - shift - cleared=no eat=no - for arg - do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - if test $eat = yes; then - eat=no - continue - fi - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - # Strip any option that makedepend may not understand. Remove - # the object too, otherwise makedepend will parse it as a source file. - -arch) - eat=yes ;; - -*|$object) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix=`echo "$object" | sed 's/^.*\././'` - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' ' -' | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E | - sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | - sed '$ s: \\$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - IFS=" " - for arg - do - case "$arg" in - -o) - shift - ;; - $object) - shift - ;; - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E 2>/dev/null | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" - echo " " >> "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvcmsys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/docs/Makefile.in b/docs/Makefile.in deleted file mode 100644 index a147ca2..0000000 --- a/docs/Makefile.in +++ /dev/null @@ -1,430 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = docs -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -EXTRA_DIST = \ - config.xsl \ - docbook.css - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign docs/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-local mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - clean-local distclean distclean-generic distclean-libtool \ - distdir dvi dvi-am html html-am info info-am install \ - install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am - -clean-local: - rm -f *~ - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/help/Makefile.in b/help/Makefile.in deleted file mode 100644 index 37b0fd8..0000000 --- a/help/Makefile.in +++ /dev/null @@ -1,946 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# mate-doc-utils.make - make magic for building documentation -# Copyright (C) 2004-2005 Shaun McCance <[email protected]> -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software Foundation, -# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -################################################################################ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(top_srcdir)/mate-doc-utils.make -subdir = help -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -_clean_doc_header = $(if $(DOC_H_FILE),clean-doc-header) -_DOC_REAL_FORMATS = $(if $(DOC_USER_FORMATS),$(DOC_USER_FORMATS),$(DOC_FORMATS)) -_DOC_REAL_LINGUAS = $(if $(filter environment,$(origin LINGUAS)), \ - $(filter $(LINGUAS),$(DOC_LINGUAS)), \ - $(DOC_LINGUAS)) - -_DOC_ABS_SRCDIR = @abs_srcdir@ -@ENABLE_SK_TRUE@_ENABLE_SK = true - -################################################################################ -db2omf_args = \ - --stringparam db2omf.basename $(DOC_MODULE) \ - --stringparam db2omf.format $(3) \ - --stringparam db2omf.dtd \ - $(shell xmllint --format $(2) | grep -h PUBLIC | head -n 1 \ - | sed -e 's/.*PUBLIC \(\"[^\"]*\"\).*/\1/') \ - --stringparam db2omf.lang $(notdir $(patsubst %/$(notdir $(2)),%,$(2))) \ - --stringparam db2omf.omf_dir "$(OMF_DIR)" \ - --stringparam db2omf.help_dir "$(HELP_DIR)" \ - --stringparam db2omf.omf_in "$(_DOC_OMF_IN)" \ - $(if $(_ENABLE_SK), \ - --stringparam db2omf.scrollkeeper_cl "$(_skcontentslist)") \ - $(_db2omf) $(2) - -_DOC_OMF_IN = $(if $(DOC_MODULE),$(wildcard $(_DOC_ABS_SRCDIR)/$(DOC_MODULE).omf.in)) -_DOC_OMF_DB = $(if $(_DOC_OMF_IN), \ - $(foreach lc,C $(_DOC_REAL_LINGUAS),$(DOC_MODULE)-$(lc).omf)) - -_DOC_OMF_HTML = $(if $(_DOC_OMF_IN), \ - $(foreach lc,C $(_DOC_REAL_LINGUAS),$(DOC_MODULE)-html-$(lc).omf)) - - -# FIXME -_DOC_OMF_ALL = \ - $(if $(filter docbook,$(_DOC_REAL_FORMATS)),$(_DOC_OMF_DB)) \ - $(if $(filter html HTML,$(_DOC_REAL_FORMATS)),$(_DOC_OMF_HTML)) - - -################################################################################ -_DOC_C_MODULE = $(if $(DOC_MODULE),C/$(DOC_MODULE).xml) -_DOC_C_ENTITIES = $(foreach ent,$(DOC_ENTITIES),C/$(ent)) -_DOC_C_INCLUDES = $(foreach inc,$(DOC_INCLUDES),C/$(inc)) -_DOC_C_DOCS = \ - $(_DOC_C_ENTITIES) $(_DOC_C_INCLUDES) \ - $(_DOC_C_MODULE) - -_DOC_C_DOCS_NOENT = \ - $(_DOC_C_MODULE) $(_DOC_C_INCLUDES) - -_DOC_C_FIGURES = $(if $(DOC_FIGURES), \ - $(foreach fig,$(DOC_FIGURES),C/$(fig)), \ - $(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/C/figures/*.png))) - - -# FIXME: probably have to shell escape to determine the file names -_DOC_C_HTML = $(foreach f, \ - $(shell xsltproc --xinclude \ - --stringparam db.chunk.basename "$(DOC_MODULE)" \ - $(_chunks) "C/$(DOC_MODULE).xml"), \ - C/$(f).xhtml) - - -############################################################################### -_DOC_POFILES = $(if $(DOC_MODULE), \ - $(foreach lc,$(_DOC_REAL_LINGUAS),$(lc)/$(lc).po)) - -_DOC_LC_MODULES = $(if $(DOC_MODULE), \ - $(foreach lc,$(_DOC_REAL_LINGUAS),$(lc)/$(DOC_MODULE).xml)) - -_DOC_LC_INCLUDES = \ - $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach inc,$(_DOC_C_INCLUDES), \ - $(lc)/$(notdir $(inc)) )) - - -# FIXME: probably have to shell escape to determine the file names -_DOC_LC_HTML = \ - $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach doc,$(_DOC_C_HTML), \ - $(lc)/$(notdir $(doc)) )) - -_DOC_LC_DOCS = \ - $(_DOC_LC_MODULES) $(_DOC_LC_INCLUDES) \ - $(if $(filter html HTML,$(_DOC_REAL_FORMATS)),$(_DOC_LC_HTML)) - -_DOC_LC_FIGURES = $(foreach lc,$(_DOC_REAL_LINGUAS), \ - $(patsubst C/%,$(lc)/%,$(_DOC_C_FIGURES)) ) - -_DOC_SRC_FIGURES = \ - $(foreach fig,$(_DOC_C_FIGURES), $(foreach lc,C $(_DOC_REAL_LINGUAS), \ - $(wildcard $(srcdir)/$(lc)/$(patsubst C/%,%,$(fig))) )) - -_DOC_POT = $(if $(DOC_MODULE),$(DOC_MODULE).pot) - -################################################################################ -_DOC_HTML_ALL = $(if $(filter html HTML,$(_DOC_REAL_FORMATS)), \ - $(_DOC_C_HTML) $(_DOC_LC_HTML)) - -_DOC_HTML_TOPS = $(foreach lc,C $(_DOC_REAL_LINGUAS),$(lc)/$(DOC_MODULE).xhtml) -_clean_omf = $(if $(_DOC_OMF_IN),clean-doc-omf) -_clean_dsk = $(if $(_DOC_DSK_IN),clean-doc-dsk) -_clean_lc = $(if $(_DOC_REAL_LINGUAS),clean-doc-lc) -_clean_dir = $(if $(DOC_MODULE),clean-doc-dir) -DOC_MODULE = mate-power-manager -DOC_ENTITIES = legal.xml -DOC_INCLUDES = -DOC_FIGURES = \ - figures/applet-brightness.png \ - figures/applet-inhibit.png \ - figures/gpm-cell-capacity.png \ - figures/gpm-charged.png \ - figures/gpm-critical.png \ - figures/gpm-low.png \ - figures/gpm-prefs-ac.png \ - figures/gpm-prefs-battery.png \ - figures/gpm-prefs-general.png \ - figures/gpm-stats-graph.png \ - figures/gpm-suspend-problem.png \ - figures/gpm-unplugged.png \ - figures/gs-prefs.png - -DOC_LINGUAS = ca de el en_GB es eu fi fr hu it oc pa ru sv zh_CN -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/mate-doc-utils.make $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign help/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign help/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" distdir="$(distdir)" \ - dist-hook -check-am: all-am -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-local mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-local - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-data-local - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic \ - maintainer-clean-local - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool \ - mostlyclean-local - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-local - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - clean-local dist-hook distclean distclean-generic \ - distclean-libtool distclean-local distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-data-local install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic maintainer-clean-local mostlyclean \ - mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \ - pdf-am ps ps-am uninstall uninstall-am uninstall-local - - -DOC_H_FILE ?= - -DOC_H_DOCS ?= - -$(DOC_H_FILE): $(DOC_H_DOCS); - @rm -f [email protected]; touch [email protected]; - echo 'const gchar* documentation_credits[] = {' >> [email protected] - list='$(DOC_H_DOCS)'; for doc in $$list; do \ - xmlpath="`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`:$(srcdir)/`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`"; \ - if ! test -f "$$doc"; then doc="$(srcdir)/$$doc"; fi; \ - xsltproc --path "$$xmlpath" $(_credits) $$doc; \ - done | sort | uniq \ - | awk 'BEGIN{s=""}{n=split($$0,w,"<");if(s!=""&&s!=substr(w[1],1,length(w[1])-1)){print s};if(n>1){print $$0;s=""}else{s=$$0}};END{if(s!=""){print s}}' \ - | sed -e 's/\\/\\\\/' -e 's/"/\\"/' -e 's/\(.*\)/\t"\1",/' >> [email protected] - echo ' NULL' >> [email protected] - echo '};' >> [email protected] - echo >> [email protected] - list='$(DOC_H_DOCS)'; for doc in $$list; do \ - xmlpath="`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`:$(srcdir)/`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`"; \ - if ! test -f "$$doc"; then doc="$(srcdir)/$$doc"; fi; \ - docid=`echo "$$doc" | sed -e 's/.*\/\([^/]*\)\.xml/\1/' \ - | sed -e 's/[^a-zA-Z_]/_/g' | tr 'a-z' 'A-Z'`; \ - echo $$xmlpath; \ - ids=`xsltproc --xinclude --path "$$xmlpath" $(_ids) $$doc`; \ - for id in $$ids; do \ - echo '#define HELP_'`echo $$docid`'_'`echo $$id \ - | sed -e 's/[^a-zA-Z_]/_/g' | tr 'a-z' 'A-Z'`' "'$$id'"' >> [email protected]; \ - done; \ - echo >> [email protected]; \ - done; - cp [email protected] $@ && rm -f [email protected] - -dist-check-gdu: -@HAVE_MATE_DOC_UTILS_FALSE@ @echo "*** MATE Doc Utils must be installed in order to make dist" -@HAVE_MATE_DOC_UTILS_FALSE@ @false - -.PHONY: dist-doc-header -dist-doc-header: $(DOC_H_FILE) - @if test -f "$(DOC_H_FILE)"; then d=; else d="$(srcdir)/"; fi; \ - echo "$(INSTALL_DATA) $${d}$(DOC_H_FILE) $(distdir)/$(DOC_H_FILE)"; \ - $(INSTALL_DATA) "$${d}$(DOC_H_FILE)" "$(distdir)/$(DOC_H_FILE)"; - -doc-dist-hook: dist-check-gdu $(if $(DOC_H_FILE),dist-doc-header) - -.PHONY: clean-doc-header -clean-local: $(_clean_doc_header) -distclean-local: $(_clean_doc_header) -mostlyclean-local: $(_clean_doc_header) -maintainer-clean-local: $(_clean_doc_header) -clean-doc-header: - rm -f $(DOC_H_FILE) - -all: $(DOC_H_FILE) - -################################################################################ - -DOC_MODULE ?= - -DOC_ENTITIES ?= - -DOC_INCLUDES ?= - -DOC_FIGURES ?= - -DOC_FORMATS ?= docbook - -DOC_LINGUAS ?= - -################################################################################ - -_xml2po ?= `which xml2po` - -_db2html ?= `$(PKG_CONFIG) --variable db2html mate-doc-utils` -_db2omf ?= `$(PKG_CONFIG) --variable db2omf mate-doc-utils` -_chunks ?= `$(PKG_CONFIG) --variable xmldir mate-doc-utils`/mate/xslt/docbook/utils/chunks.xsl -_credits ?= `$(PKG_CONFIG) --variable xmldir mate-doc-utils`/mate/xslt/docbook/utils/credits.xsl -_ids ?= `$(PKG_CONFIG) --variable xmldir mate-doc-utils`/mate/xslt/docbook/utils/ids.xsl -@ENABLE_SK_TRUE@_skpkgdatadir ?= `scrollkeeper-config --pkgdatadir` -@ENABLE_SK_TRUE@_sklocalstatedir ?= `scrollkeeper-config --pkglocalstatedir` -@ENABLE_SK_TRUE@_skcontentslist ?= $(_skpkgdatadir)/Templates/C/scrollkeeper_cl.xml - -$(_DOC_OMF_DB) : $(_DOC_OMF_IN) -$(_DOC_OMF_DB) : $(DOC_MODULE)-%.omf : %/$(DOC_MODULE).xml - @test "x$(_ENABLE_SK)" != "xtrue" -o -f "$(_skcontentslist)" || { \ - echo "The file '$(_skcontentslist)' does not exist." >&2; \ - echo "Please check your ScrollKeeper installation." >&2; \ - exit 1; } - xsltproc -o $@ $(call db2omf_args,$@,$<,'docbook') || { rm -f "$@"; exit 1; } - -$(_DOC_OMF_HTML) : $(_DOC_OMF_IN) -$(_DOC_OMF_HTML) : $(DOC_MODULE)-html-%.omf : %/$(DOC_MODULE).xml -@ENABLE_SK_TRUE@ @test "x$(_ENABLE_SK)" != "xtrue" -o -f "$(_skcontentslist)" || { \ -@ENABLE_SK_TRUE@ echo "The file '$(_skcontentslist)' does not exist" >&2; \ -@ENABLE_SK_TRUE@ echo "Please check your ScrollKeeper installation." >&2; \ -@ENABLE_SK_TRUE@ exit 1; } - xsltproc -o $@ $(call db2omf_args,$@,$<,'xhtml') || { rm -f "$@"; exit 1; } - -.PHONY: omf -omf: $(_DOC_OMF_ALL) - -.PHONY: po -po: $(_DOC_POFILES) - -$(_DOC_POFILES): - @if ! test -d $(dir $@); then \ - echo "mkdir $(dir $@)"; \ - mkdir "$(dir $@)"; \ - fi - @if test ! -f $@ -a -f $(srcdir)/$@; then \ - echo "cp $(srcdir)/$@ $@"; \ - cp "$(srcdir)/$@" "$@"; \ - fi; - @docs=; \ - list='$(_DOC_C_DOCS_NOENT)'; for doc in $$list; do \ - docs="$$docs $(_DOC_ABS_SRCDIR)/$$doc"; \ - done; \ - if ! test -f $@; then \ - echo "(cd $(dir $@) && \ - $(_xml2po) -e $$docs > $(notdir $@).tmp && \ - cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp)"; \ - (cd $(dir $@) && \ - $(_xml2po) -e $$docs > $(notdir $@).tmp && \ - cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp); \ - else \ - echo "(cd $(dir $@) && \ - $(_xml2po) -e -u $(notdir $@) $$docs)"; \ - (cd $(dir $@) && \ - $(_xml2po) -e -u $(notdir $@) $$docs); \ - fi - -# FIXME: fix the dependancy -# FIXME: hook xml2po up -$(_DOC_LC_DOCS) : $(_DOC_POFILES) -$(_DOC_LC_DOCS) : $(_DOC_C_DOCS) - if ! test -d $(dir $@); then mkdir $(dir $@); fi - if [ -f "C/$(notdir $@)" ]; then d="../"; else d="$(_DOC_ABS_SRCDIR)/"; fi; \ - (cd $(dir $@) && \ - $(_xml2po) -e -p \ - "$${d}$(dir $@)$(patsubst %/$(notdir $@),%,$@).po" \ - "$${d}C/$(notdir $@)" > $(notdir $@).tmp && \ - cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp) -.PHONY: pot -pot: $(_DOC_POT) -$(_DOC_POT): $(_DOC_C_DOCS_NOENT) - $(_xml2po) -e -o $@ $^ - -$(_DOC_HTML_TOPS): $(_DOC_C_DOCS) $(_DOC_LC_DOCS) - xsltproc -o $@ --xinclude --param db.chunk.chunk_top "false()" --stringparam db.chunk.basename "$(DOC_MODULE)" --stringparam db.chunk.extension ".xhtml" $(_db2html) $(patsubst %.xhtml,%.xml,$@) - -################################################################################ - -all: \ - $(_DOC_C_DOCS) $(_DOC_LC_DOCS) \ - $(_DOC_OMF_ALL) $(_DOC_DSK_ALL) \ - $(_DOC_HTML_ALL) $(_DOC_POFILES) - -.PHONY: clean-doc-omf clean-doc-dsk clean-doc-lc clean-doc-dir - -clean-doc-omf: ; rm -f $(_DOC_OMF_DB) $(_DOC_OMF_HTML) -clean-doc-dsk: ; rm -f $(_DOC_DSK_DB) $(_DOC_DSK_HTML) -clean-doc-lc: - rm -f $(_DOC_LC_DOCS) - @list='$(_DOC_POFILES)'; for po in $$list; do \ - if ! test "$$po" -ef "$(srcdir)/$$po"; then \ - echo "rm -f $$po"; \ - rm -f "$$po"; \ - fi; \ - done - @for lc in C $(_DOC_REAL_LINGUAS); do \ - if test -f "$$lc/.xml2po.mo"; then \ - echo "rm -f $$lc/.xml2po.mo"; \ - rm -f "$$lc/.xml2po.mo"; \ - fi; \ - done -clean-doc-dir: - @for lc in C $(_DOC_REAL_LINGUAS); do \ - for dir in `find $$lc -depth -type d`; do \ - if ! test $$dir -ef $(srcdir)/$$dir; then \ - echo "rmdir $$dir"; \ - rmdir "$$dir"; \ - fi; \ - done; \ - done - -clean-local: \ - $(_clean_omf) $(_clean_dsk) \ - $(_clean_lc) $(_clean_dir) -distclean-local: \ - $(_clean_omf) $(_clean_dsk) \ - $(_clean_lc) $(_clean_dir) -mostlyclean-local: \ - $(_clean_omf) $(_clean_dsk) \ - $(_clean_lc) $(_clean_dir) -maintainer-clean-local: \ - $(_clean_omf) $(_clean_dsk) \ - $(_clean_lc) $(_clean_dir) - -.PHONY: dist-doc-docs dist-doc-figs dist-doc-omf dist-doc-dsk -doc-dist-hook: \ - $(if $(DOC_MODULE),dist-doc-docs) \ - $(if $(_DOC_C_FIGURES),dist-doc-figs) \ - $(if $(_DOC_OMF_IN),dist-doc-omf) -# $(if $(_DOC_DSK_IN),dist-doc-dsk) - -dist-doc-docs: $(_DOC_C_DOCS) $(_DOC_LC_DOCS) $(_DOC_POFILES) - @for lc in C $(_DOC_REAL_LINGUAS); do \ - echo " $(mkinstalldirs) $(distdir)/$$lc"; \ - $(mkinstalldirs) "$(distdir)/$$lc"; \ - done - @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS) $(_DOC_POFILES)'; \ - for doc in $$list; do \ - if test -f "$$doc"; then d=; else d="$(srcdir)/"; fi; \ - docdir=`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ - if ! test -d "$(distdir)/$$docdir"; then \ - echo "$(mkinstalldirs) $(distdir)/$$docdir"; \ - $(mkinstalldirs) "$(distdir)/$$docdir"; \ - fi; \ - echo "$(INSTALL_DATA) $$d$$doc $(distdir)/$$doc"; \ - $(INSTALL_DATA) "$$d$$doc" "$(distdir)/$$doc"; \ - done - -dist-doc-figs: $(_DOC_SRC_FIGURES) - @list='$(_DOC_C_FIGURES) $(_DOC_LC_FIGURES)'; \ - for fig in $$list; do \ - if test -f "$$fig"; then d=; else d="$(srcdir)/"; fi; \ - if test -f "$$d$$fig"; then \ - figdir=`echo $$fig | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ - if ! test -d "$(distdir)/$$figdir"; then \ - echo "$(mkinstalldirs) $(distdir)/$$figdir"; \ - $(mkinstalldirs) "$(distdir)/$$figdir"; \ - fi; \ - echo "$(INSTALL_DATA) $$d$$fig $(distdir)/$$fig"; \ - $(INSTALL_DATA) "$$d$$fig" "$(distdir)/$$fig"; \ - fi; \ - done; - -dist-doc-omf: - @if test -f "$(_DOC_OMF_IN)"; then d=; else d="$(srcdir)/"; fi; \ - echo "$(INSTALL_DATA) $$d$(_DOC_OMF_IN) $(distdir)/$(notdir $(_DOC_OMF_IN))"; \ - $(INSTALL_DATA) "$$d$(_DOC_OMF_IN)" "$(distdir)/$(notdir $(_DOC_OMF_IN))" - -dist-doc-dsk: - @if test -f "$(_DOC_DSK_IN)"; then d=; else d="$(srcdir)/"; fi; \ - echo "$(INSTALL_DATA) $$d$(_DOC_DSK_IN) $(distdir)/$(notdir $(_DOC_DSK_IN))"; \ - $(INSTALL_DATA) "$$d$(_DOC_DSK_IN)" "$(distdir)/$(notdir $(_DOC_DSK_IN))" - -.PHONY: check-doc-docs check-doc-omf -check: \ - $(if $(DOC_MODULE),check-doc-docs) \ - $(if $(_DOC_OMF_IN),check-doc-omf) - -check-doc-docs: $(_DOC_C_DOCS) $(_DOC_LC_DOCS) - @for lc in C $(_DOC_REAL_LINGUAS); do \ - if test -f "$$lc"; \ - then d=; \ - xmlpath="$$lc"; \ - else \ - d="$(srcdir)/"; \ - xmlpath="$$lc:$(srcdir)/$$lc"; \ - fi; \ - echo "xmllint --noout --noent --path $$xmlpath --xinclude --postvalid $$d$$lc/$(DOC_MODULE).xml"; \ - xmllint --noout --noent --path "$$xmlpath" --xinclude --postvalid "$$d$$lc/$(DOC_MODULE).xml"; \ - done - -check-doc-omf: $(_DOC_OMF_ALL) - @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \ - echo "xmllint --noout --xinclude --dtdvalid 'http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd' $$omf"; \ - xmllint --noout --xinclude --dtdvalid 'http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd' $$omf; \ - done - -.PHONY: install-doc-docs install-doc-html install-doc-figs install-doc-omf install-doc-dsk -install-data-local: \ - $(if $(DOC_MODULE),install-doc-docs) \ - $(if $(_DOC_HTML_ALL),install-doc-html) \ - $(if $(_DOC_C_FIGURES),install-doc-figs) \ - $(if $(_DOC_OMF_IN),install-doc-omf) -# $(if $(_DOC_DSK_IN),install-doc-dsk) - -install-doc-docs: - @for lc in C $(_DOC_REAL_LINGUAS); do \ - echo "$(mkinstalldirs) $(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$lc"; \ - $(mkinstalldirs) $(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$lc; \ - done - @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS)'; for doc in $$list; do \ - if test -f "$$doc"; then d=; else d="$(srcdir)/"; fi; \ - docdir="$$lc/"`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ - docdir="$(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$docdir"; \ - if ! test -d "$$docdir"; then \ - echo "$(mkinstalldirs) $$docdir"; \ - $(mkinstalldirs) "$$docdir"; \ - fi; \ - echo "$(INSTALL_DATA) $$d$$doc $(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$doc"; \ - $(INSTALL_DATA) $$d$$doc $(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$doc; \ - done - -install-doc-figs: - @list='$(patsubst C/%,%,$(_DOC_C_FIGURES))'; for fig in $$list; do \ - for lc in C $(_DOC_REAL_LINGUAS); do \ - figsymlink=false; \ - if test -f "$$lc/$$fig"; then \ - figfile="$$lc/$$fig"; \ - elif test -f "$(srcdir)/$$lc/$$fig"; then \ - figfile="$(srcdir)/$$lc/$$fig"; \ - else \ - figsymlink=true; \ - fi; \ - figdir="$$lc/"`echo $$fig | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ - figdir="$(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$figdir"; \ - if ! test -d "$$figdir"; then \ - echo "$(mkinstalldirs) $$figdir"; \ - $(mkinstalldirs) "$$figdir"; \ - fi; \ - figbase=`echo $$fig | sed -e 's/^.*\///'`; \ - if $$figsymlink; then \ - echo "cd $$figdir && $(LN_S) -f ../../C/$$fig $$figbase"; \ - ( cd "$$figdir" && $(LN_S) -f "../../C/$$fig" "$$figbase" ); \ - else \ - echo "$(INSTALL_DATA) $$figfile $$figdir$$figbase"; \ - $(INSTALL_DATA) "$$figfile" "$$figdir$$figbase"; \ - fi; \ - done; \ - done - -install-doc-html: - echo install-html - -install-doc-omf: - $(mkinstalldirs) $(DESTDIR)$(OMF_DIR)/$(DOC_MODULE) - @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \ - echo "$(INSTALL_DATA) $$omf $(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)/$$omf"; \ - $(INSTALL_DATA) $$omf $(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)/$$omf; \ - done - @if test "x$(_ENABLE_SK)" = "xtrue"; then \ - echo "scrollkeeper-update -p $(DESTDIR)$(_sklocalstatedir) -o $(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)"; \ - scrollkeeper-update -p "$(DESTDIR)$(_sklocalstatedir)" -o "$(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)"; \ - fi; - -install-doc-dsk: - echo install-dsk - -.PHONY: uninstall-doc-docs uninstall-doc-html uninstall-doc-figs uninstall-doc-omf uninstall-doc-dsk -uninstall-local: \ - $(if $(DOC_MODULE),uninstall-doc-docs) \ - $(if $(_DOC_HTML_ALL),uninstall-doc-html) \ - $(if $(_DOC_C_FIGURES),uninstall-doc-figs) \ - $(if $(_DOC_OMF_IN),uninstall-doc-omf) -# $(if $(_DOC_DSK_IN),uninstall-doc-dsk) - -uninstall-doc-docs: - @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS)'; for doc in $$list; do \ - echo " rm -f $(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$doc"; \ - rm -f "$(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$doc"; \ - done - -uninstall-doc-figs: - @list='$(_DOC_C_FIGURES) $(_DOC_LC_FIGURES)'; for fig in $$list; do \ - echo "rm -f $(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$fig"; \ - rm -f "$(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$fig"; \ - done; - -uninstall-doc-omf: - @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \ - if test "x$(_ENABLE_SK)" = "xtrue"; then \ - echo "scrollkeeper-uninstall -p $(_sklocalstatedir) $(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)/$$omf"; \ - scrollkeeper-uninstall -p "$(_sklocalstatedir)" "$(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)/$$omf"; \ - fi; \ - echo "rm -f $(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)/$$omf"; \ - rm -f "$(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)/$$omf"; \ - done -dist-hook: doc-dist-hook - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/install-sh b/install-sh deleted file mode 100755 index 6781b98..0000000 --- a/install-sh +++ /dev/null @@ -1,520 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2009-04-28.21; # UTC - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. - -nl=' -' -IFS=" "" $nl" - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -chgrpprog=${CHGRPPROG-chgrp} -chmodprog=${CHMODPROG-chmod} -chownprog=${CHOWNPROG-chown} -cmpprog=${CMPPROG-cmp} -cpprog=${CPPROG-cp} -mkdirprog=${MKDIRPROG-mkdir} -mvprog=${MVPROG-mv} -rmprog=${RMPROG-rm} -stripprog=${STRIPPROG-strip} - -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chgrpcmd= -chmodcmd=$chmodprog -chowncmd= -mvcmd=$mvprog -rmcmd="$rmprog -f" -stripcmd= - -src= -dst= -dir_arg= -dst_arg= - -copy_on_change=false -no_target_directory= - -usage="\ -Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: - --help display this help and exit. - --version display version info and exit. - - -c (ignored) - -C install only if different (preserve the last data modification time) - -d create directories instead of installing files. - -g GROUP $chgrpprog installed files to GROUP. - -m MODE $chmodprog installed files to MODE. - -o USER $chownprog installed files to USER. - -s $stripprog installed files. - -t DIRECTORY install into DIRECTORY. - -T report an error if DSTFILE is a directory. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG - RMPROG STRIPPROG -" - -while test $# -ne 0; do - case $1 in - -c) ;; - - -C) copy_on_change=true;; - - -d) dir_arg=true;; - - -g) chgrpcmd="$chgrpprog $2" - shift;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; - - -o) chowncmd="$chownprog $2" - shift;; - - -s) stripcmd=$stripprog;; - - -t) dst_arg=$2 - shift;; - - -T) no_target_directory=true;; - - --version) echo "$0 $scriptversion"; exit $?;; - - --) shift - break;; - - -*) echo "$0: invalid option: $1" >&2 - exit 1;; - - *) break;; - esac - shift -done - -if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dst_arg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dst_arg" - shift # fnord - fi - shift # arg - dst_arg=$arg - done -fi - -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - trap '(exit $?); exit' 1 2 13 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names starting with `-'. - case $src in - -*) src=./$src;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst_arg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - - dst=$dst_arg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst;; - esac - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; - esac - - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix='/';; - -*) prefix='./';; - *) prefix='';; - esac - - eval "$initialize_posix_glob" - - oIFS=$IFS - IFS=/ - $posix_glob set -f - set fnord $dstdir - shift - $posix_glob set +f - IFS=$oIFS - - prefixes= - - for d - do - test -z "$d" && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && - { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && - { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # If -C, don't bother to copy if it wouldn't change the file. - if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && - set X $old && old=:$2:$4:$5:$6 && - set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - - test "$old" = "$new" && - $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 - then - rm -f "$dsttmp" - else - # Rename the file to the real destination. - $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || - - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - fi || exit 1 - - trap '' 0 - fi -done - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/intltool-extract.in b/intltool-extract.in deleted file mode 100644 index e69de29..0000000 --- a/intltool-extract.in +++ /dev/null diff --git a/intltool-merge.in b/intltool-merge.in deleted file mode 100644 index e69de29..0000000 --- a/intltool-merge.in +++ /dev/null diff --git a/intltool-update.in b/intltool-update.in deleted file mode 100644 index e69de29..0000000 --- a/intltool-update.in +++ /dev/null diff --git a/man/Makefile.in b/man/Makefile.in deleted file mode 100644 index fa3930c..0000000 --- a/man/Makefile.in +++ /dev/null @@ -1,529 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = man -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -man1dir = $(mandir)/man1 -am__installdirs = "$(DESTDIR)$(man1dir)" -NROFF = nroff -MANS = $(man_MANS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -EXTRA_DIST = \ - mate-power-manager.sgml \ - mate-power-statistics.sgml \ - mate-power-preferences.sgml - -@HAVE_DOCBOOK2MAN_TRUE@man_MANS = \ -@HAVE_DOCBOOK2MAN_TRUE@ mate-power-manager.1 \ -@HAVE_DOCBOOK2MAN_TRUE@ mate-power-statistics.1 \ -@HAVE_DOCBOOK2MAN_TRUE@ mate-power-preferences.1 - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign man/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign man/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-man1: $(man_MANS) - @$(NORMAL_INSTALL) - test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" - @list=''; test -n "$(man1dir)" || exit 0; \ - { for i in $$list; do echo "$$i"; done; \ - l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ - sed -n '/\.1[a-z]*$$/p'; \ - } | while read p; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; echo "$$p"; \ - done | \ - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ - sed 'N;N;s,\n, ,g' | { \ - list=; while read file base inst; do \ - if test "$$base" = "$$inst"; then list="$$list $$file"; else \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ - fi; \ - done; \ - for i in $$list; do echo "$$i"; done | $(am__base_list) | \ - while read files; do \ - test -z "$$files" || { \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ - done; } - -uninstall-man1: - @$(NORMAL_UNINSTALL) - @list=''; test -n "$(man1dir)" || exit 0; \ - files=`{ for i in $$list; do echo "$$i"; done; \ - l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ - sed -n '/\.1[a-z]*$$/p'; \ - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ - test -z "$$files" || { \ - echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(man1dir)" && rm -f $$files; } -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @list='$(MANS)'; if test -n "$$list"; then \ - list=`for p in $$list; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ - if test -n "$$list" && \ - grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ - echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ - grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ - echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ - echo " typically \`make maintainer-clean' will remove them" >&2; \ - exit 1; \ - else :; fi; \ - else :; fi - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(MANS) -installdirs: - for dir in "$(DESTDIR)$(man1dir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-local mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-man - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: install-man1 - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-man - -uninstall-man: uninstall-man1 - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - clean-local distclean distclean-generic distclean-libtool \ - distdir dvi dvi-am html html-am info info-am install \ - install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-man1 install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ - ps ps-am uninstall uninstall-am uninstall-man uninstall-man1 - - -@[email protected]: mate-power-manager.sgml -@HAVE_DOCBOOK2MAN_TRUE@ docbook2man $? &> /dev/null - -@[email protected]: mate-power-preferences.sgml -@HAVE_DOCBOOK2MAN_TRUE@ docbook2man $? &> /dev/null - -@[email protected]: mate-power-statistics.sgml -@HAVE_DOCBOOK2MAN_TRUE@ docbook2man $? &> /dev/null - -clean-local : - rm -f *~ - rm -f *.1 - rm -f manpage.* - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/mate-doc-utils.make b/mate-doc-utils.make deleted file mode 100644 index d914f0b..0000000 --- a/mate-doc-utils.make +++ /dev/null @@ -1,578 +0,0 @@ -# mate-doc-utils.make - make magic for building documentation -# Copyright (C) 2004-2005 Shaun McCance <[email protected]> -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software Foundation, -# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -################################################################################ -## @@ Generating Header Files - -## @ DOC_H_FILE -## The name of the header file to generate -DOC_H_FILE ?= - -## @ DOC_H_DOCS -## The input DocBook files for generating the header file -DOC_H_DOCS ?= - -$(DOC_H_FILE): $(DOC_H_DOCS); - @rm -f [email protected]; touch [email protected]; - echo 'const gchar* documentation_credits[] = {' >> [email protected] - list='$(DOC_H_DOCS)'; for doc in $$list; do \ - xmlpath="`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`:$(srcdir)/`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`"; \ - if ! test -f "$$doc"; then doc="$(srcdir)/$$doc"; fi; \ - xsltproc --path "$$xmlpath" $(_credits) $$doc; \ - done | sort | uniq \ - | awk 'BEGIN{s=""}{n=split($$0,w,"<");if(s!=""&&s!=substr(w[1],1,length(w[1])-1)){print s};if(n>1){print $$0;s=""}else{s=$$0}};END{if(s!=""){print s}}' \ - | sed -e 's/\\/\\\\/' -e 's/"/\\"/' -e 's/\(.*\)/\t"\1",/' >> [email protected] - echo ' NULL' >> [email protected] - echo '};' >> [email protected] - echo >> [email protected] - list='$(DOC_H_DOCS)'; for doc in $$list; do \ - xmlpath="`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`:$(srcdir)/`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`"; \ - if ! test -f "$$doc"; then doc="$(srcdir)/$$doc"; fi; \ - docid=`echo "$$doc" | sed -e 's/.*\/\([^/]*\)\.xml/\1/' \ - | sed -e 's/[^a-zA-Z_]/_/g' | tr 'a-z' 'A-Z'`; \ - echo $$xmlpath; \ - ids=`xsltproc --xinclude --path "$$xmlpath" $(_ids) $$doc`; \ - for id in $$ids; do \ - echo '#define HELP_'`echo $$docid`'_'`echo $$id \ - | sed -e 's/[^a-zA-Z_]/_/g' | tr 'a-z' 'A-Z'`' "'$$id'"' >> [email protected]; \ - done; \ - echo >> [email protected]; \ - done; - cp [email protected] $@ && rm -f [email protected] - -dist-check-gdu: -if !HAVE_MATE_DOC_UTILS - @echo "*** MATE Doc Utils must be installed in order to make dist" - @false -endif - -.PHONY: dist-doc-header -dist-doc-header: $(DOC_H_FILE) - @if test -f "$(DOC_H_FILE)"; then d=; else d="$(srcdir)/"; fi; \ - echo "$(INSTALL_DATA) $${d}$(DOC_H_FILE) $(distdir)/$(DOC_H_FILE)"; \ - $(INSTALL_DATA) "$${d}$(DOC_H_FILE)" "$(distdir)/$(DOC_H_FILE)"; - -doc-dist-hook: dist-check-gdu $(if $(DOC_H_FILE),dist-doc-header) - -.PHONY: clean-doc-header -_clean_doc_header = $(if $(DOC_H_FILE),clean-doc-header) -clean-local: $(_clean_doc_header) -distclean-local: $(_clean_doc_header) -mostlyclean-local: $(_clean_doc_header) -maintainer-clean-local: $(_clean_doc_header) -clean-doc-header: - rm -f $(DOC_H_FILE) - -all: $(DOC_H_FILE) - - -################################################################################ -## @@ Generating Documentation Files - -## @ DOC_MODULE -## The name of the document being built -DOC_MODULE ?= - -## @ DOC_ENTITIES -## Files included with a SYSTEM entity -DOC_ENTITIES ?= - -## @ DOC_INCLUDES -## Files included with XInclude -DOC_INCLUDES ?= - -## @ DOC_FIGURES -## Figures and other external data -DOC_FIGURES ?= - -## @ DOC_FORMATS -## The default formats to be built and installed -DOC_FORMATS ?= docbook -_DOC_REAL_FORMATS = $(if $(DOC_USER_FORMATS),$(DOC_USER_FORMATS),$(DOC_FORMATS)) - -## @ DOC_LINGUAS -## The languages this document is translated into -DOC_LINGUAS ?= -_DOC_REAL_LINGUAS = $(if $(filter environment,$(origin LINGUAS)), \ - $(filter $(LINGUAS),$(DOC_LINGUAS)), \ - $(DOC_LINGUAS)) - -_DOC_ABS_SRCDIR = @abs_srcdir@ - - -################################################################################ -## Variables for Bootstrapping - -_xml2po ?= `which xml2po` - -_db2html ?= `$(PKG_CONFIG) --variable db2html mate-doc-utils` -_db2omf ?= `$(PKG_CONFIG) --variable db2omf mate-doc-utils` -_chunks ?= `$(PKG_CONFIG) --variable xmldir mate-doc-utils`/mate/xslt/docbook/utils/chunks.xsl -_credits ?= `$(PKG_CONFIG) --variable xmldir mate-doc-utils`/mate/xslt/docbook/utils/credits.xsl -_ids ?= `$(PKG_CONFIG) --variable xmldir mate-doc-utils`/mate/xslt/docbook/utils/ids.xsl - -if ENABLE_SK -_ENABLE_SK = true -_skpkgdatadir ?= `scrollkeeper-config --pkgdatadir` -_sklocalstatedir ?= `scrollkeeper-config --pkglocalstatedir` -_skcontentslist ?= $(_skpkgdatadir)/Templates/C/scrollkeeper_cl.xml -endif - - -################################################################################ -## @@ Rules for OMF Files - -db2omf_args = \ - --stringparam db2omf.basename $(DOC_MODULE) \ - --stringparam db2omf.format $(3) \ - --stringparam db2omf.dtd \ - $(shell xmllint --format $(2) | grep -h PUBLIC | head -n 1 \ - | sed -e 's/.*PUBLIC \(\"[^\"]*\"\).*/\1/') \ - --stringparam db2omf.lang $(notdir $(patsubst %/$(notdir $(2)),%,$(2))) \ - --stringparam db2omf.omf_dir "$(OMF_DIR)" \ - --stringparam db2omf.help_dir "$(HELP_DIR)" \ - --stringparam db2omf.omf_in "$(_DOC_OMF_IN)" \ - $(if $(_ENABLE_SK), \ - --stringparam db2omf.scrollkeeper_cl "$(_skcontentslist)") \ - $(_db2omf) $(2) - -## @ _DOC_OMF_IN -## The OMF input file -_DOC_OMF_IN = $(if $(DOC_MODULE),$(wildcard $(_DOC_ABS_SRCDIR)/$(DOC_MODULE).omf.in)) - -## @ _DOC_OMF_DB -## The OMF files for DocBook output -_DOC_OMF_DB = $(if $(_DOC_OMF_IN), \ - $(foreach lc,C $(_DOC_REAL_LINGUAS),$(DOC_MODULE)-$(lc).omf)) - -$(_DOC_OMF_DB) : $(_DOC_OMF_IN) -$(_DOC_OMF_DB) : $(DOC_MODULE)-%.omf : %/$(DOC_MODULE).xml - @test "x$(_ENABLE_SK)" != "xtrue" -o -f "$(_skcontentslist)" || { \ - echo "The file '$(_skcontentslist)' does not exist." >&2; \ - echo "Please check your ScrollKeeper installation." >&2; \ - exit 1; } - xsltproc -o $@ $(call db2omf_args,$@,$<,'docbook') || { rm -f "$@"; exit 1; } - -## @ _DOC_OMF_HTML -## The OMF files for HTML output -_DOC_OMF_HTML = $(if $(_DOC_OMF_IN), \ - $(foreach lc,C $(_DOC_REAL_LINGUAS),$(DOC_MODULE)-html-$(lc).omf)) - -$(_DOC_OMF_HTML) : $(_DOC_OMF_IN) -$(_DOC_OMF_HTML) : $(DOC_MODULE)-html-%.omf : %/$(DOC_MODULE).xml -if ENABLE_SK - @test "x$(_ENABLE_SK)" != "xtrue" -o -f "$(_skcontentslist)" || { \ - echo "The file '$(_skcontentslist)' does not exist" >&2; \ - echo "Please check your ScrollKeeper installation." >&2; \ - exit 1; } -endif - xsltproc -o $@ $(call db2omf_args,$@,$<,'xhtml') || { rm -f "$@"; exit 1; } - -## @ _DOC_OMF_ALL -## All OMF output files to be built -# FIXME -_DOC_OMF_ALL = \ - $(if $(filter docbook,$(_DOC_REAL_FORMATS)),$(_DOC_OMF_DB)) \ - $(if $(filter html HTML,$(_DOC_REAL_FORMATS)),$(_DOC_OMF_HTML)) - -.PHONY: omf -omf: $(_DOC_OMF_ALL) - - -################################################################################ -## @@ C Locale Documents - -## @ _DOC_C_MODULE -## The top-level documentation file in the C locale -_DOC_C_MODULE = $(if $(DOC_MODULE),C/$(DOC_MODULE).xml) - -## @ _DOC_C_ENTITIES -## Files included with a SYSTEM entity in the C locale -_DOC_C_ENTITIES = $(foreach ent,$(DOC_ENTITIES),C/$(ent)) - -## @ _DOC_C_XINCLUDES -## Files included with XInclude in the C locale -_DOC_C_INCLUDES = $(foreach inc,$(DOC_INCLUDES),C/$(inc)) - -## @ _DOC_C_DOCS -## All documentation files in the C locale -_DOC_C_DOCS = \ - $(_DOC_C_ENTITIES) $(_DOC_C_INCLUDES) \ - $(_DOC_C_MODULE) - -## @ _DOC_C_DOCS_NOENT -## All documentation files in the C locale, -## except files included with a SYSTEM entity -_DOC_C_DOCS_NOENT = \ - $(_DOC_C_MODULE) $(_DOC_C_INCLUDES) - -## @ _DOC_C_FIGURES -## All figures and other external data in the C locale -_DOC_C_FIGURES = $(if $(DOC_FIGURES), \ - $(foreach fig,$(DOC_FIGURES),C/$(fig)), \ - $(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/C/figures/*.png))) - -## @ _DOC_C_HTML -## All HTML documentation in the C locale -# FIXME: probably have to shell escape to determine the file names -_DOC_C_HTML = $(foreach f, \ - $(shell xsltproc --xinclude \ - --stringparam db.chunk.basename "$(DOC_MODULE)" \ - $(_chunks) "C/$(DOC_MODULE).xml"), \ - C/$(f).xhtml) - -############################################################################### -## @@ Other Locale Documentation - -## @ _DOC_POFILES -## The .po files used for translating the document -_DOC_POFILES = $(if $(DOC_MODULE), \ - $(foreach lc,$(_DOC_REAL_LINGUAS),$(lc)/$(lc).po)) - -.PHONY: po -po: $(_DOC_POFILES) - -## @ _DOC_LC_MODULES -## The top-level documentation files in all other locales -_DOC_LC_MODULES = $(if $(DOC_MODULE), \ - $(foreach lc,$(_DOC_REAL_LINGUAS),$(lc)/$(DOC_MODULE).xml)) - -## @ _DOC_LC_XINCLUDES -## Files included with XInclude in all other locales -_DOC_LC_INCLUDES = \ - $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach inc,$(_DOC_C_INCLUDES), \ - $(lc)/$(notdir $(inc)) )) - -## @ _DOC_LC_HTML -## All HTML documentation in all other locales -# FIXME: probably have to shell escape to determine the file names -_DOC_LC_HTML = \ - $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach doc,$(_DOC_C_HTML), \ - $(lc)/$(notdir $(doc)) )) - -## @ _DOC_LC_DOCS -## All documentation files in all other locales -_DOC_LC_DOCS = \ - $(_DOC_LC_MODULES) $(_DOC_LC_INCLUDES) \ - $(if $(filter html HTML,$(_DOC_REAL_FORMATS)),$(_DOC_LC_HTML)) - -## @ _DOC_LC_FIGURES -## All figures and other external data in all other locales -_DOC_LC_FIGURES = $(foreach lc,$(_DOC_REAL_LINGUAS), \ - $(patsubst C/%,$(lc)/%,$(_DOC_C_FIGURES)) ) - -_DOC_SRC_FIGURES = \ - $(foreach fig,$(_DOC_C_FIGURES), $(foreach lc,C $(_DOC_REAL_LINGUAS), \ - $(wildcard $(srcdir)/$(lc)/$(patsubst C/%,%,$(fig))) )) - -$(_DOC_POFILES): - @if ! test -d $(dir $@); then \ - echo "mkdir $(dir $@)"; \ - mkdir "$(dir $@)"; \ - fi - @if test ! -f $@ -a -f $(srcdir)/$@; then \ - echo "cp $(srcdir)/$@ $@"; \ - cp "$(srcdir)/$@" "$@"; \ - fi; - @docs=; \ - list='$(_DOC_C_DOCS_NOENT)'; for doc in $$list; do \ - docs="$$docs $(_DOC_ABS_SRCDIR)/$$doc"; \ - done; \ - if ! test -f $@; then \ - echo "(cd $(dir $@) && \ - $(_xml2po) -e $$docs > $(notdir $@).tmp && \ - cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp)"; \ - (cd $(dir $@) && \ - $(_xml2po) -e $$docs > $(notdir $@).tmp && \ - cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp); \ - else \ - echo "(cd $(dir $@) && \ - $(_xml2po) -e -u $(notdir $@) $$docs)"; \ - (cd $(dir $@) && \ - $(_xml2po) -e -u $(notdir $@) $$docs); \ - fi - -# FIXME: fix the dependancy -# FIXME: hook xml2po up -$(_DOC_LC_DOCS) : $(_DOC_POFILES) -$(_DOC_LC_DOCS) : $(_DOC_C_DOCS) - if ! test -d $(dir $@); then mkdir $(dir $@); fi - if [ -f "C/$(notdir $@)" ]; then d="../"; else d="$(_DOC_ABS_SRCDIR)/"; fi; \ - (cd $(dir $@) && \ - $(_xml2po) -e -p \ - "$${d}$(dir $@)$(patsubst %/$(notdir $@),%,$@).po" \ - "$${d}C/$(notdir $@)" > $(notdir $@).tmp && \ - cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp) - -## @ _DOC_POT -## A pot file -_DOC_POT = $(if $(DOC_MODULE),$(DOC_MODULE).pot) -.PHONY: pot -pot: $(_DOC_POT) -$(_DOC_POT): $(_DOC_C_DOCS_NOENT) - $(_xml2po) -e -o $@ $^ - - -################################################################################ -## @@ All Documentation - -## @ _DOC_HTML_ALL -## All HTML documentation, only if it's built -_DOC_HTML_ALL = $(if $(filter html HTML,$(_DOC_REAL_FORMATS)), \ - $(_DOC_C_HTML) $(_DOC_LC_HTML)) - -_DOC_HTML_TOPS = $(foreach lc,C $(_DOC_REAL_LINGUAS),$(lc)/$(DOC_MODULE).xhtml) - -$(_DOC_HTML_TOPS): $(_DOC_C_DOCS) $(_DOC_LC_DOCS) - xsltproc -o $@ --xinclude --param db.chunk.chunk_top "false()" --stringparam db.chunk.basename "$(DOC_MODULE)" --stringparam db.chunk.extension ".xhtml" $(_db2html) $(patsubst %.xhtml,%.xml,$@) - - -################################################################################ - -all: \ - $(_DOC_C_DOCS) $(_DOC_LC_DOCS) \ - $(_DOC_OMF_ALL) $(_DOC_DSK_ALL) \ - $(_DOC_HTML_ALL) $(_DOC_POFILES) - - -.PHONY: clean-doc-omf clean-doc-dsk clean-doc-lc clean-doc-dir - -clean-doc-omf: ; rm -f $(_DOC_OMF_DB) $(_DOC_OMF_HTML) -clean-doc-dsk: ; rm -f $(_DOC_DSK_DB) $(_DOC_DSK_HTML) -clean-doc-lc: - rm -f $(_DOC_LC_DOCS) - @list='$(_DOC_POFILES)'; for po in $$list; do \ - if ! test "$$po" -ef "$(srcdir)/$$po"; then \ - echo "rm -f $$po"; \ - rm -f "$$po"; \ - fi; \ - done - @for lc in C $(_DOC_REAL_LINGUAS); do \ - if test -f "$$lc/.xml2po.mo"; then \ - echo "rm -f $$lc/.xml2po.mo"; \ - rm -f "$$lc/.xml2po.mo"; \ - fi; \ - done -clean-doc-dir: - @for lc in C $(_DOC_REAL_LINGUAS); do \ - for dir in `find $$lc -depth -type d`; do \ - if ! test $$dir -ef $(srcdir)/$$dir; then \ - echo "rmdir $$dir"; \ - rmdir "$$dir"; \ - fi; \ - done; \ - done - -_clean_omf = $(if $(_DOC_OMF_IN),clean-doc-omf) -_clean_dsk = $(if $(_DOC_DSK_IN),clean-doc-dsk) -_clean_lc = $(if $(_DOC_REAL_LINGUAS),clean-doc-lc) -_clean_dir = $(if $(DOC_MODULE),clean-doc-dir) - -clean-local: \ - $(_clean_omf) $(_clean_dsk) \ - $(_clean_lc) $(_clean_dir) -distclean-local: \ - $(_clean_omf) $(_clean_dsk) \ - $(_clean_lc) $(_clean_dir) -mostlyclean-local: \ - $(_clean_omf) $(_clean_dsk) \ - $(_clean_lc) $(_clean_dir) -maintainer-clean-local: \ - $(_clean_omf) $(_clean_dsk) \ - $(_clean_lc) $(_clean_dir) - - -.PHONY: dist-doc-docs dist-doc-figs dist-doc-omf dist-doc-dsk -doc-dist-hook: \ - $(if $(DOC_MODULE),dist-doc-docs) \ - $(if $(_DOC_C_FIGURES),dist-doc-figs) \ - $(if $(_DOC_OMF_IN),dist-doc-omf) -# $(if $(_DOC_DSK_IN),dist-doc-dsk) - -dist-doc-docs: $(_DOC_C_DOCS) $(_DOC_LC_DOCS) $(_DOC_POFILES) - @for lc in C $(_DOC_REAL_LINGUAS); do \ - echo " $(mkinstalldirs) $(distdir)/$$lc"; \ - $(mkinstalldirs) "$(distdir)/$$lc"; \ - done - @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS) $(_DOC_POFILES)'; \ - for doc in $$list; do \ - if test -f "$$doc"; then d=; else d="$(srcdir)/"; fi; \ - docdir=`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ - if ! test -d "$(distdir)/$$docdir"; then \ - echo "$(mkinstalldirs) $(distdir)/$$docdir"; \ - $(mkinstalldirs) "$(distdir)/$$docdir"; \ - fi; \ - echo "$(INSTALL_DATA) $$d$$doc $(distdir)/$$doc"; \ - $(INSTALL_DATA) "$$d$$doc" "$(distdir)/$$doc"; \ - done - -dist-doc-figs: $(_DOC_SRC_FIGURES) - @list='$(_DOC_C_FIGURES) $(_DOC_LC_FIGURES)'; \ - for fig in $$list; do \ - if test -f "$$fig"; then d=; else d="$(srcdir)/"; fi; \ - if test -f "$$d$$fig"; then \ - figdir=`echo $$fig | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ - if ! test -d "$(distdir)/$$figdir"; then \ - echo "$(mkinstalldirs) $(distdir)/$$figdir"; \ - $(mkinstalldirs) "$(distdir)/$$figdir"; \ - fi; \ - echo "$(INSTALL_DATA) $$d$$fig $(distdir)/$$fig"; \ - $(INSTALL_DATA) "$$d$$fig" "$(distdir)/$$fig"; \ - fi; \ - done; - -dist-doc-omf: - @if test -f "$(_DOC_OMF_IN)"; then d=; else d="$(srcdir)/"; fi; \ - echo "$(INSTALL_DATA) $$d$(_DOC_OMF_IN) $(distdir)/$(notdir $(_DOC_OMF_IN))"; \ - $(INSTALL_DATA) "$$d$(_DOC_OMF_IN)" "$(distdir)/$(notdir $(_DOC_OMF_IN))" - -dist-doc-dsk: - @if test -f "$(_DOC_DSK_IN)"; then d=; else d="$(srcdir)/"; fi; \ - echo "$(INSTALL_DATA) $$d$(_DOC_DSK_IN) $(distdir)/$(notdir $(_DOC_DSK_IN))"; \ - $(INSTALL_DATA) "$$d$(_DOC_DSK_IN)" "$(distdir)/$(notdir $(_DOC_DSK_IN))" - - -.PHONY: check-doc-docs check-doc-omf -check: \ - $(if $(DOC_MODULE),check-doc-docs) \ - $(if $(_DOC_OMF_IN),check-doc-omf) - -check-doc-docs: $(_DOC_C_DOCS) $(_DOC_LC_DOCS) - @for lc in C $(_DOC_REAL_LINGUAS); do \ - if test -f "$$lc"; \ - then d=; \ - xmlpath="$$lc"; \ - else \ - d="$(srcdir)/"; \ - xmlpath="$$lc:$(srcdir)/$$lc"; \ - fi; \ - echo "xmllint --noout --noent --path $$xmlpath --xinclude --postvalid $$d$$lc/$(DOC_MODULE).xml"; \ - xmllint --noout --noent --path "$$xmlpath" --xinclude --postvalid "$$d$$lc/$(DOC_MODULE).xml"; \ - done - -check-doc-omf: $(_DOC_OMF_ALL) - @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \ - echo "xmllint --noout --xinclude --dtdvalid 'http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd' $$omf"; \ - xmllint --noout --xinclude --dtdvalid 'http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd' $$omf; \ - done - - -.PHONY: install-doc-docs install-doc-html install-doc-figs install-doc-omf install-doc-dsk -install-data-local: \ - $(if $(DOC_MODULE),install-doc-docs) \ - $(if $(_DOC_HTML_ALL),install-doc-html) \ - $(if $(_DOC_C_FIGURES),install-doc-figs) \ - $(if $(_DOC_OMF_IN),install-doc-omf) -# $(if $(_DOC_DSK_IN),install-doc-dsk) - -install-doc-docs: - @for lc in C $(_DOC_REAL_LINGUAS); do \ - echo "$(mkinstalldirs) $(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$lc"; \ - $(mkinstalldirs) $(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$lc; \ - done - @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS)'; for doc in $$list; do \ - if test -f "$$doc"; then d=; else d="$(srcdir)/"; fi; \ - docdir="$$lc/"`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ - docdir="$(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$docdir"; \ - if ! test -d "$$docdir"; then \ - echo "$(mkinstalldirs) $$docdir"; \ - $(mkinstalldirs) "$$docdir"; \ - fi; \ - echo "$(INSTALL_DATA) $$d$$doc $(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$doc"; \ - $(INSTALL_DATA) $$d$$doc $(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$doc; \ - done - -install-doc-figs: - @list='$(patsubst C/%,%,$(_DOC_C_FIGURES))'; for fig in $$list; do \ - for lc in C $(_DOC_REAL_LINGUAS); do \ - figsymlink=false; \ - if test -f "$$lc/$$fig"; then \ - figfile="$$lc/$$fig"; \ - elif test -f "$(srcdir)/$$lc/$$fig"; then \ - figfile="$(srcdir)/$$lc/$$fig"; \ - else \ - figsymlink=true; \ - fi; \ - figdir="$$lc/"`echo $$fig | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \ - figdir="$(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$figdir"; \ - if ! test -d "$$figdir"; then \ - echo "$(mkinstalldirs) $$figdir"; \ - $(mkinstalldirs) "$$figdir"; \ - fi; \ - figbase=`echo $$fig | sed -e 's/^.*\///'`; \ - if $$figsymlink; then \ - echo "cd $$figdir && $(LN_S) -f ../../C/$$fig $$figbase"; \ - ( cd "$$figdir" && $(LN_S) -f "../../C/$$fig" "$$figbase" ); \ - else \ - echo "$(INSTALL_DATA) $$figfile $$figdir$$figbase"; \ - $(INSTALL_DATA) "$$figfile" "$$figdir$$figbase"; \ - fi; \ - done; \ - done - -install-doc-html: - echo install-html - -install-doc-omf: - $(mkinstalldirs) $(DESTDIR)$(OMF_DIR)/$(DOC_MODULE) - @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \ - echo "$(INSTALL_DATA) $$omf $(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)/$$omf"; \ - $(INSTALL_DATA) $$omf $(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)/$$omf; \ - done - @if test "x$(_ENABLE_SK)" = "xtrue"; then \ - echo "scrollkeeper-update -p $(DESTDIR)$(_sklocalstatedir) -o $(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)"; \ - scrollkeeper-update -p "$(DESTDIR)$(_sklocalstatedir)" -o "$(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)"; \ - fi; - -install-doc-dsk: - echo install-dsk - - -.PHONY: uninstall-doc-docs uninstall-doc-html uninstall-doc-figs uninstall-doc-omf uninstall-doc-dsk -uninstall-local: \ - $(if $(DOC_MODULE),uninstall-doc-docs) \ - $(if $(_DOC_HTML_ALL),uninstall-doc-html) \ - $(if $(_DOC_C_FIGURES),uninstall-doc-figs) \ - $(if $(_DOC_OMF_IN),uninstall-doc-omf) -# $(if $(_DOC_DSK_IN),uninstall-doc-dsk) - -uninstall-doc-docs: - @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS)'; for doc in $$list; do \ - echo " rm -f $(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$doc"; \ - rm -f "$(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$doc"; \ - done - -uninstall-doc-figs: - @list='$(_DOC_C_FIGURES) $(_DOC_LC_FIGURES)'; for fig in $$list; do \ - echo "rm -f $(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$fig"; \ - rm -f "$(DESTDIR)$(HELP_DIR)/$(DOC_MODULE)/$$fig"; \ - done; - -uninstall-doc-omf: - @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \ - if test "x$(_ENABLE_SK)" = "xtrue"; then \ - echo "scrollkeeper-uninstall -p $(_sklocalstatedir) $(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)/$$omf"; \ - scrollkeeper-uninstall -p "$(_sklocalstatedir)" "$(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)/$$omf"; \ - fi; \ - echo "rm -f $(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)/$$omf"; \ - rm -f "$(DESTDIR)$(OMF_DIR)/$(DOC_MODULE)/$$omf"; \ - done diff --git a/mkinstalldirs b/mkinstalldirs deleted file mode 100755 index 4191a45..0000000 --- a/mkinstalldirs +++ /dev/null @@ -1,162 +0,0 @@ -#! /bin/sh -# mkinstalldirs --- make directory hierarchy - -scriptversion=2009-04-28.21; # UTC - -# Original author: Noah Friedman <[email protected]> -# Created: 1993-05-16 -# Public domain. -# -# This file is maintained in Automake, please report -# bugs to <[email protected]> or send patches to -# <[email protected]>. - -nl=' -' -IFS=" "" $nl" -errstatus=0 -dirmode= - -usage="\ -Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ... - -Create each directory DIR (with mode MODE, if specified), including all -leading file name components. - -Report bugs to <[email protected]>." - -# process command line arguments -while test $# -gt 0 ; do - case $1 in - -h | --help | --h*) # -h for help - echo "$usage" - exit $? - ;; - -m) # -m PERM arg - shift - test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } - dirmode=$1 - shift - ;; - --version) - echo "$0 $scriptversion" - exit $? - ;; - --) # stop option processing - shift - break - ;; - -*) # unknown option - echo "$usage" 1>&2 - exit 1 - ;; - *) # first non-opt arg - break - ;; - esac -done - -for file -do - if test -d "$file"; then - shift - else - break - fi -done - -case $# in - 0) exit 0 ;; -esac - -# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and -# mkdir -p a/c at the same time, both will detect that a is missing, -# one will create a, then the other will try to create a and die with -# a "File exists" error. This is a problem when calling mkinstalldirs -# from a parallel make. We use --version in the probe to restrict -# ourselves to GNU mkdir, which is thread-safe. -case $dirmode in - '') - if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - echo "mkdir -p -- $*" - exec mkdir -p -- "$@" - else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - test -d ./-p && rmdir ./-p - test -d ./--version && rmdir ./--version - fi - ;; - *) - if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 && - test ! -d ./--version; then - echo "mkdir -m $dirmode -p -- $*" - exec mkdir -m "$dirmode" -p -- "$@" - else - # Clean up after NextStep and OpenStep mkdir. - for d in ./-m ./-p ./--version "./$dirmode"; - do - test -d $d && rmdir $d - done - fi - ;; -esac - -for file -do - case $file in - /*) pathcomp=/ ;; - *) pathcomp= ;; - esac - oIFS=$IFS - IFS=/ - set fnord $file - shift - IFS=$oIFS - - for d - do - test "x$d" = x && continue - - pathcomp=$pathcomp$d - case $pathcomp in - -*) pathcomp=./$pathcomp ;; - esac - - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" - - mkdir "$pathcomp" || lasterr=$? - - if test ! -d "$pathcomp"; then - errstatus=$lasterr - else - if test ! -z "$dirmode"; then - echo "chmod $dirmode $pathcomp" - lasterr= - chmod "$dirmode" "$pathcomp" || lasterr=$? - - if test ! -z "$lasterr"; then - errstatus=$lasterr - fi - fi - fi - fi - - pathcomp=$pathcomp/ - done -done - -exit $errstatus - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/omf.make b/omf.make deleted file mode 100644 index cb7acba..0000000 --- a/omf.make +++ /dev/null @@ -1,61 +0,0 @@ -# -# No modifications of this Makefile should be necessary. -# -# This file contains the build instructions for installing OMF files. It is -# generally called from the makefiles for particular formats of documentation. -# -# Note that you must configure your package with --localstatedir=/var -# so that the scrollkeeper-update command below will update the database -# in the standard scrollkeeper directory. -# -# If it is impossible to configure with --localstatedir=/var, then -# modify the definition of scrollkeeper_localstate_dir so that -# it points to the correct location. Note that you must still use -# $(localstatedir) in this or when people build RPMs it will update -# the real database on their system instead of the one under RPM_BUILD_ROOT. -# -# Note: This make file is not incorporated into xmldocs.make because, in -# general, there will be other documents install besides XML documents -# and the makefiles for these formats should also include this file. -# -# About this file: -# This file was derived from scrollkeeper_example2, a package -# illustrating how to install documentation and OMF files for use with -# ScrollKeeper 0.3.x and 0.4.x. For more information, see: -# http://scrollkeeper.sourceforge.net/ -# Version: 0.1.3 (last updated: March 20, 2002) -# - -omf_dest_dir=$(datadir)/omf/@PACKAGE@ -scrollkeeper_localstate_dir = $(localstatedir)/scrollkeeper - -# At some point, it may be wise to change to something like this: -# scrollkeeper_localstate_dir = @SCROLLKEEPER_STATEDIR@ - -omf: omf_timestamp - -omf_timestamp: $(omffile) - -for file in $(omffile); do \ - scrollkeeper-preinstall $(docdir)/$(docname).xml $(srcdir)/$$file $$file.out; \ - done; \ - touch omf_timestamp - -install-data-hook-omf: - $(mkinstalldirs) $(DESTDIR)$(omf_dest_dir) - for file in $(omffile); do \ - $(INSTALL_DATA) $$file.out $(DESTDIR)$(omf_dest_dir)/$$file; \ - done - -scrollkeeper-update -p $(DESTDIR)$(scrollkeeper_localstate_dir) -o $(DESTDIR)$(omf_dest_dir) - -uninstall-local-omf: - -for file in $(srcdir)/*.omf; do \ - basefile=`basename $$file`; \ - rm -f $(DESTDIR)$(omf_dest_dir)/$$basefile; \ - done - -rmdir $(DESTDIR)$(omf_dest_dir) - -scrollkeeper-update -p $(DESTDIR)$(scrollkeeper_localstate_dir) - -clean-local-omf: - -for file in $(omffile); do \ - rm -f $$file.out; \ - done diff --git a/po/Makefile.in.in b/po/Makefile.in.in deleted file mode 100644 index c7e8302..0000000 --- a/po/Makefile.in.in +++ /dev/null @@ -1,217 +0,0 @@ -# Makefile for program source directory in GNU NLS utilities package. -# Copyright (C) 1995, 1996, 1997 by Ulrich Drepper <[email protected]> -# Copyright (C) 2004-2008 Rodney Dawes <[email protected]> -# -# This file may be copied and used freely without restrictions. It may -# be used in projects which are not available under a GNU Public License, -# but which still want to provide support for the GNU gettext functionality. -# -# - Modified by Owen Taylor <[email protected]> to use GETTEXT_PACKAGE -# instead of PACKAGE and to look for po2tbl in ./ not in intl/ -# -# - Modified by jacob berkman <[email protected]> to install -# Makefile.in.in and po2tbl.sed.in for use with glib-gettextize -# -# - Modified by Rodney Dawes <[email protected]> for use with intltool -# -# We have the following line for use by intltoolize: -# INTLTOOL_MAKEFILE - -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -PACKAGE = @PACKAGE@ -VERSION = @VERSION@ - -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -top_builddir = @top_builddir@ -VPATH = @srcdir@ - -prefix = @prefix@ -exec_prefix = @exec_prefix@ -datadir = @datadir@ -datarootdir = @datarootdir@ -libdir = @libdir@ -DATADIRNAME = @DATADIRNAME@ -itlocaledir = $(prefix)/$(DATADIRNAME)/locale -subdir = po -install_sh = @install_sh@ -# Automake >= 1.8 provides @mkdir_p@. -# Until it can be supposed, use the safe fallback: -mkdir_p = $(install_sh) -d - -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ - -GMSGFMT = @GMSGFMT@ -MSGFMT = @MSGFMT@ -XGETTEXT = @XGETTEXT@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -MSGMERGE = INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --dist -GENPOT = INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --pot - -ALL_LINGUAS = @ALL_LINGUAS@ - -PO_LINGUAS=$(shell if test -r $(srcdir)/LINGUAS; then grep -v "^\#" $(srcdir)/LINGUAS; else echo "$(ALL_LINGUAS)"; fi) - -USER_LINGUAS=$(shell if test -n "$(LINGUAS)"; then LLINGUAS="$(LINGUAS)"; ALINGUAS="$(ALL_LINGUAS)"; for lang in $$LLINGUAS; do if test -n "`grep '^$$lang$$' $(srcdir)/LINGUAS 2>/dev/null`" -o -n "`echo $$ALINGUAS|tr ' ' '\n'|grep '^$$lang$$'`"; then printf "$$lang "; fi; done; fi) - -USE_LINGUAS=$(shell if test -n "$(USER_LINGUAS)" -o -n "$(LINGUAS)"; then LLINGUAS="$(USER_LINGUAS)"; else if test -n "$(PO_LINGUAS)"; then LLINGUAS="$(PO_LINGUAS)"; else LLINGUAS="$(ALL_LINGUAS)"; fi; fi; for lang in $$LLINGUAS; do printf "$$lang "; done) - -POFILES=$(shell LINGUAS="$(PO_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.po "; done) - -DISTFILES = Makefile.in.in POTFILES.in $(POFILES) -EXTRA_DISTFILES = ChangeLog POTFILES.skip Makevars LINGUAS - -POTFILES = \ -# This comment gets stripped out - -CATALOGS=$(shell LINGUAS="$(USE_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.gmo "; done) - -.SUFFIXES: -.SUFFIXES: .po .pox .gmo .mo .msg .cat - -.po.pox: - $(MAKE) $(GETTEXT_PACKAGE).pot - $(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox - -.po.mo: - $(MSGFMT) -o $@ $< - -.po.gmo: - file=`echo $* | sed 's,.*/,,'`.gmo \ - && rm -f $$file && $(GMSGFMT) -o $$file $< - -.po.cat: - sed -f ../intl/po2msg.sed < $< > $*.msg \ - && rm -f $@ && gencat $@ $*.msg - - -all: all-@USE_NLS@ - -all-yes: $(CATALOGS) -all-no: - -$(GETTEXT_PACKAGE).pot: $(POTFILES) - $(GENPOT) - -install: install-data -install-data: install-data-@USE_NLS@ -install-data-no: all -install-data-yes: all - linguas="$(USE_LINGUAS)"; \ - for lang in $$linguas; do \ - dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $$dir; \ - if test -r $$lang.gmo; then \ - $(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ - echo "installing $$lang.gmo as $$dir/$(GETTEXT_PACKAGE).mo"; \ - else \ - $(INSTALL_DATA) $(srcdir)/$$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \ - echo "installing $(srcdir)/$$lang.gmo as" \ - "$$dir/$(GETTEXT_PACKAGE).mo"; \ - fi; \ - if test -r $$lang.gmo.m; then \ - $(INSTALL_DATA) $$lang.gmo.m $$dir/$(GETTEXT_PACKAGE).mo.m; \ - echo "installing $$lang.gmo.m as $$dir/$(GETTEXT_PACKAGE).mo.m"; \ - else \ - if test -r $(srcdir)/$$lang.gmo.m ; then \ - $(INSTALL_DATA) $(srcdir)/$$lang.gmo.m \ - $$dir/$(GETTEXT_PACKAGE).mo.m; \ - echo "installing $(srcdir)/$$lang.gmo.m as" \ - "$$dir/$(GETTEXT_PACKAGE).mo.m"; \ - else \ - true; \ - fi; \ - fi; \ - done - -# Empty stubs to satisfy archaic automake needs -dvi info tags TAGS ID: - -# Define this as empty until I found a useful application. -install-exec installcheck: - -uninstall: - linguas="$(USE_LINGUAS)"; \ - for lang in $$linguas; do \ - rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \ - rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \ - done - -check: all $(GETTEXT_PACKAGE).pot - rm -f missing notexist - srcdir=$(srcdir) $(INTLTOOL_UPDATE) -m - if [ -r missing -o -r notexist ]; then \ - exit 1; \ - fi - -mostlyclean: - rm -f *.pox $(GETTEXT_PACKAGE).pot *.old.po cat-id-tbl.tmp - rm -f .intltool-merge-cache - -clean: mostlyclean - -distclean: clean - rm -f Makefile Makefile.in POTFILES stamp-it - rm -f *.mo *.msg *.cat *.cat.m *.gmo - -maintainer-clean: distclean - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - rm -f Makefile.in.in - -distdir = ../$(PACKAGE)-$(VERSION)/$(subdir) -dist distdir: $(DISTFILES) - dists="$(DISTFILES)"; \ - extra_dists="$(EXTRA_DISTFILES)"; \ - for file in $$extra_dists; do \ - test -f $(srcdir)/$$file && dists="$$dists $(srcdir)/$$file"; \ - done; \ - for file in $$dists; do \ - test -f $$file || file="$(srcdir)/$$file"; \ - ln $$file $(distdir) 2> /dev/null \ - || cp -p $$file $(distdir); \ - done - -update-po: Makefile - $(MAKE) $(GETTEXT_PACKAGE).pot - tmpdir=`pwd`; \ - linguas="$(USE_LINGUAS)"; \ - for lang in $$linguas; do \ - echo "$$lang:"; \ - result="`$(MSGMERGE) -o $$tmpdir/$$lang.new.po $$lang`"; \ - if $$result; then \ - if cmp $(srcdir)/$$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "msgmerge for $$lang.gmo failed!"; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi; \ - done - -Makefile POTFILES: stamp-it - @if test ! -f $@; then \ - rm -f stamp-it; \ - $(MAKE) stamp-it; \ - fi - -stamp-it: Makefile.in.in $(top_builddir)/config.status POTFILES.in - cd $(top_builddir) \ - && CONFIG_FILES=$(subdir)/Makefile.in CONFIG_HEADERS= CONFIG_LINKS= \ - $(SHELL) ./config.status - -# Tell versions [3.59,3.63) of GNU make not to export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/policy/Makefile.in b/policy/Makefile.in deleted file mode 100644 index e2a49d5..0000000 --- a/policy/Makefile.in +++ /dev/null @@ -1,490 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = policy -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(polkit_policydir)" -DATA = $(polkit_policy_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -polkit_policydir = $(datadir)/polkit-1/actions -polkit_policy_DATA = \ - org.mate.power.policy - -EXTRA_DIST = org.mate.power.policy.in2 -DISTCLEANFILES = org.mate.power.policy org.mate.power.policy.in -all: all-am - -.SUFFIXES: -.SUFFIXES: .in .in2 -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign policy/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign policy/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-polkit_policyDATA: $(polkit_policy_DATA) - @$(NORMAL_INSTALL) - test -z "$(polkit_policydir)" || $(MKDIR_P) "$(DESTDIR)$(polkit_policydir)" - @list='$(polkit_policy_DATA)'; test -n "$(polkit_policydir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(polkit_policydir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(polkit_policydir)" || exit $$?; \ - done - -uninstall-polkit_policyDATA: - @$(NORMAL_UNINSTALL) - @list='$(polkit_policy_DATA)'; test -n "$(polkit_policydir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(polkit_policydir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(polkit_policydir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(polkit_policydir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-local mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-polkit_policyDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-polkit_policyDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - clean-local distclean distclean-generic distclean-libtool \ - distdir dvi dvi-am html html-am info info-am install \ - install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-polkit_policyDATA \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ - uninstall-polkit_policyDATA - - -# You will need a recent intltool or the patch from this bug -# http://bugzilla.mate.org/show_bug.cgi?id=462312 -@INTLTOOL_POLICY_RULE@ - -.in2.in: - sed "s|[@]sbindir@|${sbindir}|" $< > $@ - -clean-local : - rm -f *~ - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/src/Makefile.in b/src/Makefile.in deleted file mode 100644 index 8ba1f19..0000000 --- a/src/Makefile.in +++ /dev/null @@ -1,2033 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -bin_PROGRAMS = mate-power-manager$(EXEEXT) \ - mate-power-preferences$(EXEEXT) mate-power-statistics$(EXEEXT) \ - $(am__EXEEXT_1) -sbin_PROGRAMS = mate-power-backlight-helper$(EXEEXT) $(am__EXEEXT_1) -check_PROGRAMS = mate-power-self-test$(EXEEXT) -TESTS = mate-power-self-test$(EXEEXT) -subdir = src -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -LIBRARIES = $(noinst_LIBRARIES) -ARFLAGS = cru -AM_V_AR = $(am__v_AR_$(V)) -am__v_AR_ = $(am__v_AR_$(AM_DEFAULT_VERBOSITY)) -am__v_AR_0 = @echo " AR " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -libgpmshared_a_AR = $(AR) $(ARFLAGS) -libgpmshared_a_LIBADD = -am__objects_1 = -am_libgpmshared_a_OBJECTS = egg-color.$(OBJEXT) egg-debug.$(OBJEXT) \ - egg-unique.$(OBJEXT) egg-precision.$(OBJEXT) \ - egg-array-float.$(OBJEXT) egg-idletime.$(OBJEXT) \ - egg-dbus-proxy.$(OBJEXT) egg-dbus-monitor.$(OBJEXT) \ - egg-discrete.$(OBJEXT) egg-string.$(OBJEXT) \ - egg-console-kit.$(OBJEXT) gpm-common.$(OBJEXT) \ - gpm-marshal.$(OBJEXT) gpm-upower.$(OBJEXT) $(am__objects_1) -libgpmshared_a_OBJECTS = $(am_libgpmshared_a_OBJECTS) -am__EXEEXT_1 = -am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" -PROGRAMS = $(bin_PROGRAMS) $(sbin_PROGRAMS) -am_mate_power_backlight_helper_OBJECTS = \ - mate_power_backlight_helper-gpm-backlight-helper.$(OBJEXT) \ - $(am__objects_1) -mate_power_backlight_helper_OBJECTS = \ - $(am_mate_power_backlight_helper_OBJECTS) -am__DEPENDENCIES_1 = -mate_power_backlight_helper_DEPENDENCIES = libgpmshared.a \ - $(am__DEPENDENCIES_1) -AM_V_lt = $(am__v_lt_$(V)) -am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) -am__v_lt_0 = --silent -mate_power_backlight_helper_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ - $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ - $(mate_power_backlight_helper_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -am_mate_power_manager_OBJECTS = mate_power_manager-gpm-dpms.$(OBJEXT) \ - mate_power_manager-gpm-phone.$(OBJEXT) \ - mate_power_manager-gpm-backlight.$(OBJEXT) \ - mate_power_manager-gpm-prefs-server.$(OBJEXT) \ - mate_power_manager-gpm-idle.$(OBJEXT) \ - mate_power_manager-gpm-load.$(OBJEXT) \ - mate_power_manager-gpm-disks.$(OBJEXT) \ - mate_power_manager-gpm-control.$(OBJEXT) \ - mate_power_manager-gpm-button.$(OBJEXT) \ - mate_power_manager-gpm-brightness.$(OBJEXT) \ - mate_power_manager-gpm-main.$(OBJEXT) \ - mate_power_manager-gpm-manager.$(OBJEXT) \ - mate_power_manager-gpm-tray-icon.$(OBJEXT) \ - mate_power_manager-gpm-screensaver.$(OBJEXT) \ - mate_power_manager-gpm-session.$(OBJEXT) \ - mate_power_manager-gpm-networkmanager.$(OBJEXT) \ - mate_power_manager-gsd-media-keys-window.$(OBJEXT) \ - mate_power_manager-gpm-engine.$(OBJEXT) $(am__objects_1) -mate_power_manager_OBJECTS = $(am_mate_power_manager_OBJECTS) -mate_power_manager_DEPENDENCIES = libgpmshared.a $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) -mate_power_manager_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ - $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ - $(mate_power_manager_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -am_mate_power_preferences_OBJECTS = \ - mate_power_preferences-gpm-prefs.$(OBJEXT) \ - mate_power_preferences-gpm-prefs-core.$(OBJEXT) \ - $(am__objects_1) -mate_power_preferences_OBJECTS = $(am_mate_power_preferences_OBJECTS) -mate_power_preferences_DEPENDENCIES = libgpmshared.a \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) -mate_power_preferences_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ - $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ - $(mate_power_preferences_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -am_mate_power_self_test_OBJECTS = \ - mate_power_self_test-gpm-self-test.$(OBJEXT) \ - mate_power_self_test-egg-color.$(OBJEXT) \ - mate_power_self_test-egg-test.$(OBJEXT) \ - mate_power_self_test-egg-debug.$(OBJEXT) \ - mate_power_self_test-egg-dbus-monitor.$(OBJEXT) \ - mate_power_self_test-egg-dbus-proxy.$(OBJEXT) \ - mate_power_self_test-egg-precision.$(OBJEXT) \ - mate_power_self_test-egg-idletime.$(OBJEXT) \ - mate_power_self_test-egg-discrete.$(OBJEXT) \ - mate_power_self_test-egg-array-float.$(OBJEXT) \ - mate_power_self_test-egg-console-kit.$(OBJEXT) \ - mate_power_self_test-gpm-prefs-server.$(OBJEXT) \ - mate_power_self_test-gpm-control.$(OBJEXT) \ - mate_power_self_test-gpm-networkmanager.$(OBJEXT) \ - mate_power_self_test-gpm-dpms.$(OBJEXT) \ - mate_power_self_test-gpm-button.$(OBJEXT) \ - mate_power_self_test-gpm-screensaver.$(OBJEXT) \ - mate_power_self_test-gpm-engine.$(OBJEXT) \ - mate_power_self_test-gpm-phone.$(OBJEXT) \ - mate_power_self_test-gpm-idle.$(OBJEXT) \ - mate_power_self_test-gpm-session.$(OBJEXT) \ - mate_power_self_test-gpm-load.$(OBJEXT) \ - mate_power_self_test-gpm-marshal.$(OBJEXT) \ - mate_power_self_test-gpm-common.$(OBJEXT) \ - mate_power_self_test-gpm-upower.$(OBJEXT) $(am__objects_1) -mate_power_self_test_OBJECTS = $(am_mate_power_self_test_OBJECTS) -mate_power_self_test_DEPENDENCIES = $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) -mate_power_self_test_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ - $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ - $(mate_power_self_test_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -am_mate_power_statistics_OBJECTS = \ - mate_power_statistics-gpm-statistics.$(OBJEXT) \ - mate_power_statistics-gpm-point-obj.$(OBJEXT) \ - mate_power_statistics-gpm-graph-widget.$(OBJEXT) \ - $(am__objects_1) -mate_power_statistics_OBJECTS = $(am_mate_power_statistics_OBJECTS) -mate_power_statistics_DEPENDENCIES = libgpmshared.a \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ - $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) -mate_power_statistics_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ - $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ - $(mate_power_statistics_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_$(V)) -am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) -am__v_CC_0 = @echo " CC " $@; -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_$(V)) -am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) -am__v_CCLD_0 = @echo " CCLD " $@; -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -SOURCES = $(libgpmshared_a_SOURCES) \ - $(mate_power_backlight_helper_SOURCES) \ - $(mate_power_manager_SOURCES) \ - $(mate_power_preferences_SOURCES) \ - $(mate_power_self_test_SOURCES) \ - $(mate_power_statistics_SOURCES) -DIST_SOURCES = $(libgpmshared_a_SOURCES) \ - $(mate_power_backlight_helper_SOURCES) \ - $(mate_power_manager_SOURCES) \ - $(mate_power_preferences_SOURCES) \ - $(mate_power_self_test_SOURCES) \ - $(mate_power_statistics_SOURCES) -ETAGS = etags -CTAGS = ctags -am__tty_colors = \ -red=; grn=; lgn=; blu=; std= -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -AUTOMAKE_OPTIONS = 1.7 -NULL = -EXTRA_DIST = \ - org.mate.PowerManager.xml \ - org.mate.PowerManager.Backlight.xml \ - gpm-marshal.list \ - $(NULL) - -INCLUDES = \ - $(GLIB_CFLAGS) \ - $(DBUS_CFLAGS) \ - $(MATE_CFLAGS) \ - $(UNIQUE_CFLAGS) \ - $(X11_CFLAGS) \ - $(LIBMATENOTIFY_CFLAGS) \ - $(CANBERRA_CFLAGS) \ - $(GSTREAMER_CFLAGS) \ - -DI_KNOW_THE_DEVICEKIT_POWER_API_IS_SUBJECT_TO_CHANGE \ - $(UPOWER_CFLAGS) \ - -DBINDIR=\"$(bindir)\" \ - -DSBINDIR=\"$(sbindir)\" \ - -DMATELOCALEDIR=\""$(datadir)/locale"\" \ - -DDATADIR=\"$(datadir)\" \ - -DPREFIX=\""$(prefix)"\" \ - -DSYSCONFDIR=\""$(sysconfdir)"\" \ - -DLIBDIR=\""$(libdir)"\" \ - -DVERSION="\"$(VERSION)\"" \ - -DGPM_DATA=\"$(pkgdatadir)\" \ - -DGTKBUILDERDIR=\"$(pkgdatadir)\" \ - -DUP_DISABLE_DEPRECATED \ - -DEGG_LOG_FILE=\""/tmp/gpm.log"\" \ - -DEGG_VERBOSE="\"GPM_VERBOSE\"" \ - -DEGG_LOGGING="\"GPM_LOGGING\"" \ - -DEGG_CONSOLE="\"GPM_CONSOLE\"" \ - -I$(top_srcdir) \ - $(NULL) - -noinst_LIBRARIES = libgpmshared.a -libgpmshared_a_SOURCES = \ - egg-color.c \ - egg-color.h \ - egg-debug.h \ - egg-debug.c \ - egg-unique.h \ - egg-unique.c \ - egg-precision.h \ - egg-precision.c \ - egg-array-float.c \ - egg-array-float.h \ - egg-idletime.h \ - egg-idletime.c \ - egg-dbus-proxy.h \ - egg-dbus-proxy.c \ - egg-dbus-monitor.h \ - egg-dbus-monitor.c \ - egg-discrete.h \ - egg-discrete.c \ - egg-string.h \ - egg-string.c \ - egg-console-kit.h \ - egg-console-kit.c \ - gpm-common.h \ - gpm-common.c \ - gpm-marshal.h \ - gpm-marshal.c \ - gpm-upower.c \ - gpm-upower.h \ - $(NULL) - -mate_power_backlight_helper_SOURCES = \ - gpm-backlight-helper.c \ - $(NULL) - -mate_power_backlight_helper_LDADD = \ - libgpmshared.a \ - $(GLIB_LIBS) \ - -lm - -mate_power_backlight_helper_CFLAGS = \ - $(WARNINGFLAGS) \ - $(NULL) - -mate_power_statistics_SOURCES = \ - gpm-statistics.c \ - gpm-point-obj.c \ - gpm-point-obj.h \ - gpm-graph-widget.h \ - gpm-graph-widget.c \ - $(NULL) - -mate_power_statistics_LDADD = \ - libgpmshared.a \ - $(GLIB_LIBS) \ - $(X11_LIBS) \ - $(UPOWER_LIBS) \ - $(MATE_LIBS) \ - $(UNIQUE_LIBS) \ - $(DBUS_LIBS) \ - -lm - -mate_power_statistics_CFLAGS = \ - $(WARNINGFLAGS) \ - $(NULL) - -mate_power_preferences_SOURCES = \ - gpm-prefs.c \ - gpm-prefs-core.h \ - gpm-prefs-core.c \ - $(NULL) - -mate_power_preferences_LDADD = \ - libgpmshared.a \ - $(GLIB_LIBS) \ - $(X11_LIBS) \ - $(MATE_LIBS) \ - $(DBUS_LIBS) \ - $(UNIQUE_LIBS) \ - $(GPM_EXTRA_LIBS) \ - $(UPOWER_LIBS) \ - -lm - -mate_power_preferences_CFLAGS = \ - $(WARNINGFLAGS) \ - $(NULL) - -mate_power_manager_SOURCES = \ - gpm-dpms.h \ - gpm-dpms.c \ - gpm-phone.h \ - gpm-phone.c \ - gpm-backlight.h \ - gpm-backlight.c \ - gpm-prefs-server.h \ - gpm-prefs-server.c \ - gpm-idle.h \ - gpm-idle.c \ - gpm-load.h \ - gpm-load.c \ - gpm-disks.h \ - gpm-disks.c \ - gpm-control.h \ - gpm-control.c \ - gpm-button.h \ - gpm-button.c \ - gpm-brightness.h \ - gpm-brightness.c \ - gpm-main.c \ - gpm-manager.h \ - gpm-manager.c \ - gpm-tray-icon.h \ - gpm-tray-icon.c \ - gpm-screensaver.h \ - gpm-screensaver.c \ - gpm-session.h \ - gpm-session.c \ - gpm-networkmanager.h \ - gpm-networkmanager.c \ - gpm-stock-icons.h \ - gsd-media-keys-window.h \ - gsd-media-keys-window.c \ - gpm-engine.h \ - gpm-engine.c \ - $(NULL) - -mate_power_manager_LDADD = \ - libgpmshared.a \ - $(GLIB_LIBS) \ - $(X11_LIBS) \ - $(GSTREAMER_LIBS) \ - $(MATE_LIBS) \ - $(DBUS_LIBS) \ - $(X11_LIBS) \ - $(CANBERRA_LIBS) \ - $(LIBMATENOTIFY_LIBS) \ - $(GPM_EXTRA_LIBS) \ - $(UPOWER_LIBS) \ - -lm - -mate_power_manager_CFLAGS = \ - $(WARNINGFLAGS) \ - $(NULL) - -mate_power_self_test_SOURCES = \ - gpm-self-test.c \ - egg-color.h \ - egg-color.c \ - egg-test.h \ - egg-test.c \ - egg-debug.h \ - egg-debug.c \ - egg-dbus-monitor.h \ - egg-dbus-monitor.c \ - egg-dbus-proxy.h \ - egg-dbus-proxy.c \ - egg-precision.h \ - egg-precision.c \ - egg-idletime.h \ - egg-idletime.c \ - egg-discrete.h \ - egg-discrete.c \ - egg-array-float.h \ - egg-array-float.c \ - egg-console-kit.h \ - egg-console-kit.c \ - gpm-prefs-server.h \ - gpm-prefs-server.c \ - gpm-control.h \ - gpm-control.c \ - gpm-networkmanager.h \ - gpm-networkmanager.c \ - gpm-dpms.h \ - gpm-dpms.c \ - gpm-button.h \ - gpm-button.c \ - gpm-screensaver.h \ - gpm-screensaver.c \ - gpm-engine.h \ - gpm-engine.c \ - gpm-phone.h \ - gpm-phone.c \ - gpm-idle.h \ - gpm-idle.c \ - gpm-session.h \ - gpm-session.c \ - gpm-load.h \ - gpm-load.c \ - gpm-marshal.h \ - gpm-marshal.c \ - gpm-common.h \ - gpm-common.c \ - gpm-upower.h \ - gpm-upower.c \ - $(NULL) - -mate_power_self_test_LDADD = \ - $(GLIB_LIBS) \ - $(X11_LIBS) \ - $(MATE_LIBS) \ - $(GSTREAMER_LIBS) \ - $(UPOWER_LIBS) \ - $(DBUS_LIBS) \ - $(X11_LIBS) \ - $(LIBMATENOTIFY_LIBS) \ - $(GPM_EXTRA_LIBS) \ - -lm - -mate_power_self_test_CFLAGS = -DEGG_TEST $(AM_CFLAGS) $(WARNINGFLAGS) -BUILT_SOURCES = \ - org.mate.PowerManager.h \ - org.mate.PowerManager.Backlight.h \ - gpm-marshal.c \ - gpm-marshal.h \ - $(NULL) - -CLEANFILES = $(BUILT_SOURCES) -MAINTAINERCLEANFILES = \ - *~ \ - Makefile.in \ - $(NULL) - -all: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstLIBRARIES: - -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) -libgpmshared.a: $(libgpmshared_a_OBJECTS) $(libgpmshared_a_DEPENDENCIES) - $(AM_V_at)-rm -f libgpmshared.a - $(AM_V_AR)$(libgpmshared_a_AR) libgpmshared.a $(libgpmshared_a_OBJECTS) $(libgpmshared_a_LIBADD) - $(AM_V_at)$(RANLIB) libgpmshared.a -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - for p in $$list; do echo "$$p $$p"; done | \ - sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p || test -f $$p1; \ - then echo "$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ - -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ - sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) files[d] = files[d] " " $$1; \ - else { print "f", $$3 "/" $$4, $$1; } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' `; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(bindir)" && rm -f $$files - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list - -clean-checkPROGRAMS: - @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list -install-sbinPROGRAMS: $(sbin_PROGRAMS) - @$(NORMAL_INSTALL) - test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)" - @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ - for p in $$list; do echo "$$p $$p"; done | \ - sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p || test -f $$p1; \ - then echo "$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ - -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ - sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) files[d] = files[d] " " $$1; \ - else { print "f", $$3 "/" $$4, $$1; } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-sbinPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' `; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(sbindir)" && rm -f $$files - -clean-sbinPROGRAMS: - @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list -mate-power-backlight-helper$(EXEEXT): $(mate_power_backlight_helper_OBJECTS) $(mate_power_backlight_helper_DEPENDENCIES) - @rm -f mate-power-backlight-helper$(EXEEXT) - $(AM_V_CCLD)$(mate_power_backlight_helper_LINK) $(mate_power_backlight_helper_OBJECTS) $(mate_power_backlight_helper_LDADD) $(LIBS) -mate-power-manager$(EXEEXT): $(mate_power_manager_OBJECTS) $(mate_power_manager_DEPENDENCIES) - @rm -f mate-power-manager$(EXEEXT) - $(AM_V_CCLD)$(mate_power_manager_LINK) $(mate_power_manager_OBJECTS) $(mate_power_manager_LDADD) $(LIBS) -mate-power-preferences$(EXEEXT): $(mate_power_preferences_OBJECTS) $(mate_power_preferences_DEPENDENCIES) - @rm -f mate-power-preferences$(EXEEXT) - $(AM_V_CCLD)$(mate_power_preferences_LINK) $(mate_power_preferences_OBJECTS) $(mate_power_preferences_LDADD) $(LIBS) -mate-power-self-test$(EXEEXT): $(mate_power_self_test_OBJECTS) $(mate_power_self_test_DEPENDENCIES) - @rm -f mate-power-self-test$(EXEEXT) - $(AM_V_CCLD)$(mate_power_self_test_LINK) $(mate_power_self_test_OBJECTS) $(mate_power_self_test_LDADD) $(LIBS) -mate-power-statistics$(EXEEXT): $(mate_power_statistics_OBJECTS) $(mate_power_statistics_DEPENDENCIES) - @rm -f mate-power-statistics$(EXEEXT) - $(AM_V_CCLD)$(mate_power_statistics_LINK) $(mate_power_statistics_OBJECTS) $(mate_power_statistics_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egg-array-float.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egg-color.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egg-console-kit.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egg-dbus-monitor.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egg-dbus-proxy.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egg-debug.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egg-discrete.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egg-idletime.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egg-precision.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egg-string.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/egg-unique.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpm-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpm-marshal.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpm-upower.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_backlight_helper-gpm-backlight-helper.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-backlight.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-brightness.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-button.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-control.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-disks.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-dpms.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-engine.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-idle.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-load.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-main.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-manager.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-networkmanager.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-phone.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-prefs-server.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-screensaver.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-session.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gpm-tray-icon.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_manager-gsd-media-keys-window.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_preferences-gpm-prefs-core.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_preferences-gpm-prefs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-egg-array-float.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-egg-color.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-egg-console-kit.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-egg-dbus-monitor.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-egg-dbus-proxy.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-egg-debug.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-egg-discrete.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-egg-idletime.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-egg-precision.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-egg-test.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-gpm-button.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-gpm-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-gpm-control.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-gpm-dpms.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-gpm-engine.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-gpm-idle.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-gpm-load.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-gpm-marshal.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-gpm-networkmanager.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-gpm-phone.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-gpm-prefs-server.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-gpm-screensaver.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-gpm-self-test.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-gpm-session.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_self_test-gpm-upower.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_statistics-gpm-graph-widget.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_statistics-gpm-point-obj.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mate_power_statistics-gpm-statistics.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< - -mate_power_backlight_helper-gpm-backlight-helper.o: gpm-backlight-helper.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_backlight_helper_CFLAGS) $(CFLAGS) -MT mate_power_backlight_helper-gpm-backlight-helper.o -MD -MP -MF $(DEPDIR)/mate_power_backlight_helper-gpm-backlight-helper.Tpo -c -o mate_power_backlight_helper-gpm-backlight-helper.o `test -f 'gpm-backlight-helper.c' || echo '$(srcdir)/'`gpm-backlight-helper.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_backlight_helper-gpm-backlight-helper.Tpo $(DEPDIR)/mate_power_backlight_helper-gpm-backlight-helper.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-backlight-helper.c' object='mate_power_backlight_helper-gpm-backlight-helper.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_backlight_helper_CFLAGS) $(CFLAGS) -c -o mate_power_backlight_helper-gpm-backlight-helper.o `test -f 'gpm-backlight-helper.c' || echo '$(srcdir)/'`gpm-backlight-helper.c - -mate_power_backlight_helper-gpm-backlight-helper.obj: gpm-backlight-helper.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_backlight_helper_CFLAGS) $(CFLAGS) -MT mate_power_backlight_helper-gpm-backlight-helper.obj -MD -MP -MF $(DEPDIR)/mate_power_backlight_helper-gpm-backlight-helper.Tpo -c -o mate_power_backlight_helper-gpm-backlight-helper.obj `if test -f 'gpm-backlight-helper.c'; then $(CYGPATH_W) 'gpm-backlight-helper.c'; else $(CYGPATH_W) '$(srcdir)/gpm-backlight-helper.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_backlight_helper-gpm-backlight-helper.Tpo $(DEPDIR)/mate_power_backlight_helper-gpm-backlight-helper.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-backlight-helper.c' object='mate_power_backlight_helper-gpm-backlight-helper.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_backlight_helper_CFLAGS) $(CFLAGS) -c -o mate_power_backlight_helper-gpm-backlight-helper.obj `if test -f 'gpm-backlight-helper.c'; then $(CYGPATH_W) 'gpm-backlight-helper.c'; else $(CYGPATH_W) '$(srcdir)/gpm-backlight-helper.c'; fi` - -mate_power_manager-gpm-dpms.o: gpm-dpms.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-dpms.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-dpms.Tpo -c -o mate_power_manager-gpm-dpms.o `test -f 'gpm-dpms.c' || echo '$(srcdir)/'`gpm-dpms.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-dpms.Tpo $(DEPDIR)/mate_power_manager-gpm-dpms.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-dpms.c' object='mate_power_manager-gpm-dpms.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-dpms.o `test -f 'gpm-dpms.c' || echo '$(srcdir)/'`gpm-dpms.c - -mate_power_manager-gpm-dpms.obj: gpm-dpms.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-dpms.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-dpms.Tpo -c -o mate_power_manager-gpm-dpms.obj `if test -f 'gpm-dpms.c'; then $(CYGPATH_W) 'gpm-dpms.c'; else $(CYGPATH_W) '$(srcdir)/gpm-dpms.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-dpms.Tpo $(DEPDIR)/mate_power_manager-gpm-dpms.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-dpms.c' object='mate_power_manager-gpm-dpms.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-dpms.obj `if test -f 'gpm-dpms.c'; then $(CYGPATH_W) 'gpm-dpms.c'; else $(CYGPATH_W) '$(srcdir)/gpm-dpms.c'; fi` - -mate_power_manager-gpm-phone.o: gpm-phone.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-phone.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-phone.Tpo -c -o mate_power_manager-gpm-phone.o `test -f 'gpm-phone.c' || echo '$(srcdir)/'`gpm-phone.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-phone.Tpo $(DEPDIR)/mate_power_manager-gpm-phone.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-phone.c' object='mate_power_manager-gpm-phone.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-phone.o `test -f 'gpm-phone.c' || echo '$(srcdir)/'`gpm-phone.c - -mate_power_manager-gpm-phone.obj: gpm-phone.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-phone.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-phone.Tpo -c -o mate_power_manager-gpm-phone.obj `if test -f 'gpm-phone.c'; then $(CYGPATH_W) 'gpm-phone.c'; else $(CYGPATH_W) '$(srcdir)/gpm-phone.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-phone.Tpo $(DEPDIR)/mate_power_manager-gpm-phone.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-phone.c' object='mate_power_manager-gpm-phone.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-phone.obj `if test -f 'gpm-phone.c'; then $(CYGPATH_W) 'gpm-phone.c'; else $(CYGPATH_W) '$(srcdir)/gpm-phone.c'; fi` - -mate_power_manager-gpm-backlight.o: gpm-backlight.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-backlight.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-backlight.Tpo -c -o mate_power_manager-gpm-backlight.o `test -f 'gpm-backlight.c' || echo '$(srcdir)/'`gpm-backlight.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-backlight.Tpo $(DEPDIR)/mate_power_manager-gpm-backlight.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-backlight.c' object='mate_power_manager-gpm-backlight.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-backlight.o `test -f 'gpm-backlight.c' || echo '$(srcdir)/'`gpm-backlight.c - -mate_power_manager-gpm-backlight.obj: gpm-backlight.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-backlight.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-backlight.Tpo -c -o mate_power_manager-gpm-backlight.obj `if test -f 'gpm-backlight.c'; then $(CYGPATH_W) 'gpm-backlight.c'; else $(CYGPATH_W) '$(srcdir)/gpm-backlight.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-backlight.Tpo $(DEPDIR)/mate_power_manager-gpm-backlight.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-backlight.c' object='mate_power_manager-gpm-backlight.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-backlight.obj `if test -f 'gpm-backlight.c'; then $(CYGPATH_W) 'gpm-backlight.c'; else $(CYGPATH_W) '$(srcdir)/gpm-backlight.c'; fi` - -mate_power_manager-gpm-prefs-server.o: gpm-prefs-server.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-prefs-server.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-prefs-server.Tpo -c -o mate_power_manager-gpm-prefs-server.o `test -f 'gpm-prefs-server.c' || echo '$(srcdir)/'`gpm-prefs-server.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-prefs-server.Tpo $(DEPDIR)/mate_power_manager-gpm-prefs-server.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-prefs-server.c' object='mate_power_manager-gpm-prefs-server.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-prefs-server.o `test -f 'gpm-prefs-server.c' || echo '$(srcdir)/'`gpm-prefs-server.c - -mate_power_manager-gpm-prefs-server.obj: gpm-prefs-server.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-prefs-server.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-prefs-server.Tpo -c -o mate_power_manager-gpm-prefs-server.obj `if test -f 'gpm-prefs-server.c'; then $(CYGPATH_W) 'gpm-prefs-server.c'; else $(CYGPATH_W) '$(srcdir)/gpm-prefs-server.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-prefs-server.Tpo $(DEPDIR)/mate_power_manager-gpm-prefs-server.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-prefs-server.c' object='mate_power_manager-gpm-prefs-server.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-prefs-server.obj `if test -f 'gpm-prefs-server.c'; then $(CYGPATH_W) 'gpm-prefs-server.c'; else $(CYGPATH_W) '$(srcdir)/gpm-prefs-server.c'; fi` - -mate_power_manager-gpm-idle.o: gpm-idle.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-idle.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-idle.Tpo -c -o mate_power_manager-gpm-idle.o `test -f 'gpm-idle.c' || echo '$(srcdir)/'`gpm-idle.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-idle.Tpo $(DEPDIR)/mate_power_manager-gpm-idle.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-idle.c' object='mate_power_manager-gpm-idle.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-idle.o `test -f 'gpm-idle.c' || echo '$(srcdir)/'`gpm-idle.c - -mate_power_manager-gpm-idle.obj: gpm-idle.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-idle.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-idle.Tpo -c -o mate_power_manager-gpm-idle.obj `if test -f 'gpm-idle.c'; then $(CYGPATH_W) 'gpm-idle.c'; else $(CYGPATH_W) '$(srcdir)/gpm-idle.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-idle.Tpo $(DEPDIR)/mate_power_manager-gpm-idle.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-idle.c' object='mate_power_manager-gpm-idle.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-idle.obj `if test -f 'gpm-idle.c'; then $(CYGPATH_W) 'gpm-idle.c'; else $(CYGPATH_W) '$(srcdir)/gpm-idle.c'; fi` - -mate_power_manager-gpm-load.o: gpm-load.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-load.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-load.Tpo -c -o mate_power_manager-gpm-load.o `test -f 'gpm-load.c' || echo '$(srcdir)/'`gpm-load.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-load.Tpo $(DEPDIR)/mate_power_manager-gpm-load.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-load.c' object='mate_power_manager-gpm-load.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-load.o `test -f 'gpm-load.c' || echo '$(srcdir)/'`gpm-load.c - -mate_power_manager-gpm-load.obj: gpm-load.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-load.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-load.Tpo -c -o mate_power_manager-gpm-load.obj `if test -f 'gpm-load.c'; then $(CYGPATH_W) 'gpm-load.c'; else $(CYGPATH_W) '$(srcdir)/gpm-load.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-load.Tpo $(DEPDIR)/mate_power_manager-gpm-load.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-load.c' object='mate_power_manager-gpm-load.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-load.obj `if test -f 'gpm-load.c'; then $(CYGPATH_W) 'gpm-load.c'; else $(CYGPATH_W) '$(srcdir)/gpm-load.c'; fi` - -mate_power_manager-gpm-disks.o: gpm-disks.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-disks.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-disks.Tpo -c -o mate_power_manager-gpm-disks.o `test -f 'gpm-disks.c' || echo '$(srcdir)/'`gpm-disks.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-disks.Tpo $(DEPDIR)/mate_power_manager-gpm-disks.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-disks.c' object='mate_power_manager-gpm-disks.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-disks.o `test -f 'gpm-disks.c' || echo '$(srcdir)/'`gpm-disks.c - -mate_power_manager-gpm-disks.obj: gpm-disks.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-disks.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-disks.Tpo -c -o mate_power_manager-gpm-disks.obj `if test -f 'gpm-disks.c'; then $(CYGPATH_W) 'gpm-disks.c'; else $(CYGPATH_W) '$(srcdir)/gpm-disks.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-disks.Tpo $(DEPDIR)/mate_power_manager-gpm-disks.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-disks.c' object='mate_power_manager-gpm-disks.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-disks.obj `if test -f 'gpm-disks.c'; then $(CYGPATH_W) 'gpm-disks.c'; else $(CYGPATH_W) '$(srcdir)/gpm-disks.c'; fi` - -mate_power_manager-gpm-control.o: gpm-control.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-control.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-control.Tpo -c -o mate_power_manager-gpm-control.o `test -f 'gpm-control.c' || echo '$(srcdir)/'`gpm-control.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-control.Tpo $(DEPDIR)/mate_power_manager-gpm-control.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-control.c' object='mate_power_manager-gpm-control.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-control.o `test -f 'gpm-control.c' || echo '$(srcdir)/'`gpm-control.c - -mate_power_manager-gpm-control.obj: gpm-control.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-control.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-control.Tpo -c -o mate_power_manager-gpm-control.obj `if test -f 'gpm-control.c'; then $(CYGPATH_W) 'gpm-control.c'; else $(CYGPATH_W) '$(srcdir)/gpm-control.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-control.Tpo $(DEPDIR)/mate_power_manager-gpm-control.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-control.c' object='mate_power_manager-gpm-control.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-control.obj `if test -f 'gpm-control.c'; then $(CYGPATH_W) 'gpm-control.c'; else $(CYGPATH_W) '$(srcdir)/gpm-control.c'; fi` - -mate_power_manager-gpm-button.o: gpm-button.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-button.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-button.Tpo -c -o mate_power_manager-gpm-button.o `test -f 'gpm-button.c' || echo '$(srcdir)/'`gpm-button.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-button.Tpo $(DEPDIR)/mate_power_manager-gpm-button.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-button.c' object='mate_power_manager-gpm-button.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-button.o `test -f 'gpm-button.c' || echo '$(srcdir)/'`gpm-button.c - -mate_power_manager-gpm-button.obj: gpm-button.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-button.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-button.Tpo -c -o mate_power_manager-gpm-button.obj `if test -f 'gpm-button.c'; then $(CYGPATH_W) 'gpm-button.c'; else $(CYGPATH_W) '$(srcdir)/gpm-button.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-button.Tpo $(DEPDIR)/mate_power_manager-gpm-button.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-button.c' object='mate_power_manager-gpm-button.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-button.obj `if test -f 'gpm-button.c'; then $(CYGPATH_W) 'gpm-button.c'; else $(CYGPATH_W) '$(srcdir)/gpm-button.c'; fi` - -mate_power_manager-gpm-brightness.o: gpm-brightness.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-brightness.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-brightness.Tpo -c -o mate_power_manager-gpm-brightness.o `test -f 'gpm-brightness.c' || echo '$(srcdir)/'`gpm-brightness.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-brightness.Tpo $(DEPDIR)/mate_power_manager-gpm-brightness.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-brightness.c' object='mate_power_manager-gpm-brightness.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-brightness.o `test -f 'gpm-brightness.c' || echo '$(srcdir)/'`gpm-brightness.c - -mate_power_manager-gpm-brightness.obj: gpm-brightness.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-brightness.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-brightness.Tpo -c -o mate_power_manager-gpm-brightness.obj `if test -f 'gpm-brightness.c'; then $(CYGPATH_W) 'gpm-brightness.c'; else $(CYGPATH_W) '$(srcdir)/gpm-brightness.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-brightness.Tpo $(DEPDIR)/mate_power_manager-gpm-brightness.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-brightness.c' object='mate_power_manager-gpm-brightness.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-brightness.obj `if test -f 'gpm-brightness.c'; then $(CYGPATH_W) 'gpm-brightness.c'; else $(CYGPATH_W) '$(srcdir)/gpm-brightness.c'; fi` - -mate_power_manager-gpm-main.o: gpm-main.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-main.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-main.Tpo -c -o mate_power_manager-gpm-main.o `test -f 'gpm-main.c' || echo '$(srcdir)/'`gpm-main.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-main.Tpo $(DEPDIR)/mate_power_manager-gpm-main.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-main.c' object='mate_power_manager-gpm-main.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-main.o `test -f 'gpm-main.c' || echo '$(srcdir)/'`gpm-main.c - -mate_power_manager-gpm-main.obj: gpm-main.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-main.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-main.Tpo -c -o mate_power_manager-gpm-main.obj `if test -f 'gpm-main.c'; then $(CYGPATH_W) 'gpm-main.c'; else $(CYGPATH_W) '$(srcdir)/gpm-main.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-main.Tpo $(DEPDIR)/mate_power_manager-gpm-main.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-main.c' object='mate_power_manager-gpm-main.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-main.obj `if test -f 'gpm-main.c'; then $(CYGPATH_W) 'gpm-main.c'; else $(CYGPATH_W) '$(srcdir)/gpm-main.c'; fi` - -mate_power_manager-gpm-manager.o: gpm-manager.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-manager.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-manager.Tpo -c -o mate_power_manager-gpm-manager.o `test -f 'gpm-manager.c' || echo '$(srcdir)/'`gpm-manager.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-manager.Tpo $(DEPDIR)/mate_power_manager-gpm-manager.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-manager.c' object='mate_power_manager-gpm-manager.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-manager.o `test -f 'gpm-manager.c' || echo '$(srcdir)/'`gpm-manager.c - -mate_power_manager-gpm-manager.obj: gpm-manager.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-manager.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-manager.Tpo -c -o mate_power_manager-gpm-manager.obj `if test -f 'gpm-manager.c'; then $(CYGPATH_W) 'gpm-manager.c'; else $(CYGPATH_W) '$(srcdir)/gpm-manager.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-manager.Tpo $(DEPDIR)/mate_power_manager-gpm-manager.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-manager.c' object='mate_power_manager-gpm-manager.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-manager.obj `if test -f 'gpm-manager.c'; then $(CYGPATH_W) 'gpm-manager.c'; else $(CYGPATH_W) '$(srcdir)/gpm-manager.c'; fi` - -mate_power_manager-gpm-tray-icon.o: gpm-tray-icon.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-tray-icon.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-tray-icon.Tpo -c -o mate_power_manager-gpm-tray-icon.o `test -f 'gpm-tray-icon.c' || echo '$(srcdir)/'`gpm-tray-icon.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-tray-icon.Tpo $(DEPDIR)/mate_power_manager-gpm-tray-icon.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-tray-icon.c' object='mate_power_manager-gpm-tray-icon.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-tray-icon.o `test -f 'gpm-tray-icon.c' || echo '$(srcdir)/'`gpm-tray-icon.c - -mate_power_manager-gpm-tray-icon.obj: gpm-tray-icon.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-tray-icon.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-tray-icon.Tpo -c -o mate_power_manager-gpm-tray-icon.obj `if test -f 'gpm-tray-icon.c'; then $(CYGPATH_W) 'gpm-tray-icon.c'; else $(CYGPATH_W) '$(srcdir)/gpm-tray-icon.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-tray-icon.Tpo $(DEPDIR)/mate_power_manager-gpm-tray-icon.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-tray-icon.c' object='mate_power_manager-gpm-tray-icon.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-tray-icon.obj `if test -f 'gpm-tray-icon.c'; then $(CYGPATH_W) 'gpm-tray-icon.c'; else $(CYGPATH_W) '$(srcdir)/gpm-tray-icon.c'; fi` - -mate_power_manager-gpm-screensaver.o: gpm-screensaver.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-screensaver.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-screensaver.Tpo -c -o mate_power_manager-gpm-screensaver.o `test -f 'gpm-screensaver.c' || echo '$(srcdir)/'`gpm-screensaver.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-screensaver.Tpo $(DEPDIR)/mate_power_manager-gpm-screensaver.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-screensaver.c' object='mate_power_manager-gpm-screensaver.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-screensaver.o `test -f 'gpm-screensaver.c' || echo '$(srcdir)/'`gpm-screensaver.c - -mate_power_manager-gpm-screensaver.obj: gpm-screensaver.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-screensaver.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-screensaver.Tpo -c -o mate_power_manager-gpm-screensaver.obj `if test -f 'gpm-screensaver.c'; then $(CYGPATH_W) 'gpm-screensaver.c'; else $(CYGPATH_W) '$(srcdir)/gpm-screensaver.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-screensaver.Tpo $(DEPDIR)/mate_power_manager-gpm-screensaver.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-screensaver.c' object='mate_power_manager-gpm-screensaver.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-screensaver.obj `if test -f 'gpm-screensaver.c'; then $(CYGPATH_W) 'gpm-screensaver.c'; else $(CYGPATH_W) '$(srcdir)/gpm-screensaver.c'; fi` - -mate_power_manager-gpm-session.o: gpm-session.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-session.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-session.Tpo -c -o mate_power_manager-gpm-session.o `test -f 'gpm-session.c' || echo '$(srcdir)/'`gpm-session.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-session.Tpo $(DEPDIR)/mate_power_manager-gpm-session.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-session.c' object='mate_power_manager-gpm-session.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-session.o `test -f 'gpm-session.c' || echo '$(srcdir)/'`gpm-session.c - -mate_power_manager-gpm-session.obj: gpm-session.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-session.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-session.Tpo -c -o mate_power_manager-gpm-session.obj `if test -f 'gpm-session.c'; then $(CYGPATH_W) 'gpm-session.c'; else $(CYGPATH_W) '$(srcdir)/gpm-session.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-session.Tpo $(DEPDIR)/mate_power_manager-gpm-session.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-session.c' object='mate_power_manager-gpm-session.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-session.obj `if test -f 'gpm-session.c'; then $(CYGPATH_W) 'gpm-session.c'; else $(CYGPATH_W) '$(srcdir)/gpm-session.c'; fi` - -mate_power_manager-gpm-networkmanager.o: gpm-networkmanager.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-networkmanager.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-networkmanager.Tpo -c -o mate_power_manager-gpm-networkmanager.o `test -f 'gpm-networkmanager.c' || echo '$(srcdir)/'`gpm-networkmanager.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-networkmanager.Tpo $(DEPDIR)/mate_power_manager-gpm-networkmanager.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-networkmanager.c' object='mate_power_manager-gpm-networkmanager.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-networkmanager.o `test -f 'gpm-networkmanager.c' || echo '$(srcdir)/'`gpm-networkmanager.c - -mate_power_manager-gpm-networkmanager.obj: gpm-networkmanager.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-networkmanager.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-networkmanager.Tpo -c -o mate_power_manager-gpm-networkmanager.obj `if test -f 'gpm-networkmanager.c'; then $(CYGPATH_W) 'gpm-networkmanager.c'; else $(CYGPATH_W) '$(srcdir)/gpm-networkmanager.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-networkmanager.Tpo $(DEPDIR)/mate_power_manager-gpm-networkmanager.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-networkmanager.c' object='mate_power_manager-gpm-networkmanager.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-networkmanager.obj `if test -f 'gpm-networkmanager.c'; then $(CYGPATH_W) 'gpm-networkmanager.c'; else $(CYGPATH_W) '$(srcdir)/gpm-networkmanager.c'; fi` - -mate_power_manager-gsd-media-keys-window.o: gsd-media-keys-window.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gsd-media-keys-window.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gsd-media-keys-window.Tpo -c -o mate_power_manager-gsd-media-keys-window.o `test -f 'gsd-media-keys-window.c' || echo '$(srcdir)/'`gsd-media-keys-window.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gsd-media-keys-window.Tpo $(DEPDIR)/mate_power_manager-gsd-media-keys-window.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gsd-media-keys-window.c' object='mate_power_manager-gsd-media-keys-window.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gsd-media-keys-window.o `test -f 'gsd-media-keys-window.c' || echo '$(srcdir)/'`gsd-media-keys-window.c - -mate_power_manager-gsd-media-keys-window.obj: gsd-media-keys-window.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gsd-media-keys-window.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gsd-media-keys-window.Tpo -c -o mate_power_manager-gsd-media-keys-window.obj `if test -f 'gsd-media-keys-window.c'; then $(CYGPATH_W) 'gsd-media-keys-window.c'; else $(CYGPATH_W) '$(srcdir)/gsd-media-keys-window.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gsd-media-keys-window.Tpo $(DEPDIR)/mate_power_manager-gsd-media-keys-window.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gsd-media-keys-window.c' object='mate_power_manager-gsd-media-keys-window.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gsd-media-keys-window.obj `if test -f 'gsd-media-keys-window.c'; then $(CYGPATH_W) 'gsd-media-keys-window.c'; else $(CYGPATH_W) '$(srcdir)/gsd-media-keys-window.c'; fi` - -mate_power_manager-gpm-engine.o: gpm-engine.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-engine.o -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-engine.Tpo -c -o mate_power_manager-gpm-engine.o `test -f 'gpm-engine.c' || echo '$(srcdir)/'`gpm-engine.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-engine.Tpo $(DEPDIR)/mate_power_manager-gpm-engine.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-engine.c' object='mate_power_manager-gpm-engine.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-engine.o `test -f 'gpm-engine.c' || echo '$(srcdir)/'`gpm-engine.c - -mate_power_manager-gpm-engine.obj: gpm-engine.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -MT mate_power_manager-gpm-engine.obj -MD -MP -MF $(DEPDIR)/mate_power_manager-gpm-engine.Tpo -c -o mate_power_manager-gpm-engine.obj `if test -f 'gpm-engine.c'; then $(CYGPATH_W) 'gpm-engine.c'; else $(CYGPATH_W) '$(srcdir)/gpm-engine.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_manager-gpm-engine.Tpo $(DEPDIR)/mate_power_manager-gpm-engine.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-engine.c' object='mate_power_manager-gpm-engine.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_manager_CFLAGS) $(CFLAGS) -c -o mate_power_manager-gpm-engine.obj `if test -f 'gpm-engine.c'; then $(CYGPATH_W) 'gpm-engine.c'; else $(CYGPATH_W) '$(srcdir)/gpm-engine.c'; fi` - -mate_power_preferences-gpm-prefs.o: gpm-prefs.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_preferences_CFLAGS) $(CFLAGS) -MT mate_power_preferences-gpm-prefs.o -MD -MP -MF $(DEPDIR)/mate_power_preferences-gpm-prefs.Tpo -c -o mate_power_preferences-gpm-prefs.o `test -f 'gpm-prefs.c' || echo '$(srcdir)/'`gpm-prefs.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_preferences-gpm-prefs.Tpo $(DEPDIR)/mate_power_preferences-gpm-prefs.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-prefs.c' object='mate_power_preferences-gpm-prefs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_preferences_CFLAGS) $(CFLAGS) -c -o mate_power_preferences-gpm-prefs.o `test -f 'gpm-prefs.c' || echo '$(srcdir)/'`gpm-prefs.c - -mate_power_preferences-gpm-prefs.obj: gpm-prefs.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_preferences_CFLAGS) $(CFLAGS) -MT mate_power_preferences-gpm-prefs.obj -MD -MP -MF $(DEPDIR)/mate_power_preferences-gpm-prefs.Tpo -c -o mate_power_preferences-gpm-prefs.obj `if test -f 'gpm-prefs.c'; then $(CYGPATH_W) 'gpm-prefs.c'; else $(CYGPATH_W) '$(srcdir)/gpm-prefs.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_preferences-gpm-prefs.Tpo $(DEPDIR)/mate_power_preferences-gpm-prefs.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-prefs.c' object='mate_power_preferences-gpm-prefs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_preferences_CFLAGS) $(CFLAGS) -c -o mate_power_preferences-gpm-prefs.obj `if test -f 'gpm-prefs.c'; then $(CYGPATH_W) 'gpm-prefs.c'; else $(CYGPATH_W) '$(srcdir)/gpm-prefs.c'; fi` - -mate_power_preferences-gpm-prefs-core.o: gpm-prefs-core.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_preferences_CFLAGS) $(CFLAGS) -MT mate_power_preferences-gpm-prefs-core.o -MD -MP -MF $(DEPDIR)/mate_power_preferences-gpm-prefs-core.Tpo -c -o mate_power_preferences-gpm-prefs-core.o `test -f 'gpm-prefs-core.c' || echo '$(srcdir)/'`gpm-prefs-core.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_preferences-gpm-prefs-core.Tpo $(DEPDIR)/mate_power_preferences-gpm-prefs-core.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-prefs-core.c' object='mate_power_preferences-gpm-prefs-core.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_preferences_CFLAGS) $(CFLAGS) -c -o mate_power_preferences-gpm-prefs-core.o `test -f 'gpm-prefs-core.c' || echo '$(srcdir)/'`gpm-prefs-core.c - -mate_power_preferences-gpm-prefs-core.obj: gpm-prefs-core.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_preferences_CFLAGS) $(CFLAGS) -MT mate_power_preferences-gpm-prefs-core.obj -MD -MP -MF $(DEPDIR)/mate_power_preferences-gpm-prefs-core.Tpo -c -o mate_power_preferences-gpm-prefs-core.obj `if test -f 'gpm-prefs-core.c'; then $(CYGPATH_W) 'gpm-prefs-core.c'; else $(CYGPATH_W) '$(srcdir)/gpm-prefs-core.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_preferences-gpm-prefs-core.Tpo $(DEPDIR)/mate_power_preferences-gpm-prefs-core.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-prefs-core.c' object='mate_power_preferences-gpm-prefs-core.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_preferences_CFLAGS) $(CFLAGS) -c -o mate_power_preferences-gpm-prefs-core.obj `if test -f 'gpm-prefs-core.c'; then $(CYGPATH_W) 'gpm-prefs-core.c'; else $(CYGPATH_W) '$(srcdir)/gpm-prefs-core.c'; fi` - -mate_power_self_test-gpm-self-test.o: gpm-self-test.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-self-test.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-self-test.Tpo -c -o mate_power_self_test-gpm-self-test.o `test -f 'gpm-self-test.c' || echo '$(srcdir)/'`gpm-self-test.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-self-test.Tpo $(DEPDIR)/mate_power_self_test-gpm-self-test.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-self-test.c' object='mate_power_self_test-gpm-self-test.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-self-test.o `test -f 'gpm-self-test.c' || echo '$(srcdir)/'`gpm-self-test.c - -mate_power_self_test-gpm-self-test.obj: gpm-self-test.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-self-test.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-self-test.Tpo -c -o mate_power_self_test-gpm-self-test.obj `if test -f 'gpm-self-test.c'; then $(CYGPATH_W) 'gpm-self-test.c'; else $(CYGPATH_W) '$(srcdir)/gpm-self-test.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-self-test.Tpo $(DEPDIR)/mate_power_self_test-gpm-self-test.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-self-test.c' object='mate_power_self_test-gpm-self-test.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-self-test.obj `if test -f 'gpm-self-test.c'; then $(CYGPATH_W) 'gpm-self-test.c'; else $(CYGPATH_W) '$(srcdir)/gpm-self-test.c'; fi` - -mate_power_self_test-egg-color.o: egg-color.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-color.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-color.Tpo -c -o mate_power_self_test-egg-color.o `test -f 'egg-color.c' || echo '$(srcdir)/'`egg-color.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-color.Tpo $(DEPDIR)/mate_power_self_test-egg-color.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-color.c' object='mate_power_self_test-egg-color.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-color.o `test -f 'egg-color.c' || echo '$(srcdir)/'`egg-color.c - -mate_power_self_test-egg-color.obj: egg-color.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-color.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-color.Tpo -c -o mate_power_self_test-egg-color.obj `if test -f 'egg-color.c'; then $(CYGPATH_W) 'egg-color.c'; else $(CYGPATH_W) '$(srcdir)/egg-color.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-color.Tpo $(DEPDIR)/mate_power_self_test-egg-color.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-color.c' object='mate_power_self_test-egg-color.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-color.obj `if test -f 'egg-color.c'; then $(CYGPATH_W) 'egg-color.c'; else $(CYGPATH_W) '$(srcdir)/egg-color.c'; fi` - -mate_power_self_test-egg-test.o: egg-test.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-test.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-test.Tpo -c -o mate_power_self_test-egg-test.o `test -f 'egg-test.c' || echo '$(srcdir)/'`egg-test.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-test.Tpo $(DEPDIR)/mate_power_self_test-egg-test.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-test.c' object='mate_power_self_test-egg-test.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-test.o `test -f 'egg-test.c' || echo '$(srcdir)/'`egg-test.c - -mate_power_self_test-egg-test.obj: egg-test.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-test.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-test.Tpo -c -o mate_power_self_test-egg-test.obj `if test -f 'egg-test.c'; then $(CYGPATH_W) 'egg-test.c'; else $(CYGPATH_W) '$(srcdir)/egg-test.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-test.Tpo $(DEPDIR)/mate_power_self_test-egg-test.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-test.c' object='mate_power_self_test-egg-test.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-test.obj `if test -f 'egg-test.c'; then $(CYGPATH_W) 'egg-test.c'; else $(CYGPATH_W) '$(srcdir)/egg-test.c'; fi` - -mate_power_self_test-egg-debug.o: egg-debug.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-debug.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-debug.Tpo -c -o mate_power_self_test-egg-debug.o `test -f 'egg-debug.c' || echo '$(srcdir)/'`egg-debug.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-debug.Tpo $(DEPDIR)/mate_power_self_test-egg-debug.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-debug.c' object='mate_power_self_test-egg-debug.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-debug.o `test -f 'egg-debug.c' || echo '$(srcdir)/'`egg-debug.c - -mate_power_self_test-egg-debug.obj: egg-debug.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-debug.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-debug.Tpo -c -o mate_power_self_test-egg-debug.obj `if test -f 'egg-debug.c'; then $(CYGPATH_W) 'egg-debug.c'; else $(CYGPATH_W) '$(srcdir)/egg-debug.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-debug.Tpo $(DEPDIR)/mate_power_self_test-egg-debug.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-debug.c' object='mate_power_self_test-egg-debug.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-debug.obj `if test -f 'egg-debug.c'; then $(CYGPATH_W) 'egg-debug.c'; else $(CYGPATH_W) '$(srcdir)/egg-debug.c'; fi` - -mate_power_self_test-egg-dbus-monitor.o: egg-dbus-monitor.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-dbus-monitor.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-dbus-monitor.Tpo -c -o mate_power_self_test-egg-dbus-monitor.o `test -f 'egg-dbus-monitor.c' || echo '$(srcdir)/'`egg-dbus-monitor.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-dbus-monitor.Tpo $(DEPDIR)/mate_power_self_test-egg-dbus-monitor.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-dbus-monitor.c' object='mate_power_self_test-egg-dbus-monitor.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-dbus-monitor.o `test -f 'egg-dbus-monitor.c' || echo '$(srcdir)/'`egg-dbus-monitor.c - -mate_power_self_test-egg-dbus-monitor.obj: egg-dbus-monitor.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-dbus-monitor.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-dbus-monitor.Tpo -c -o mate_power_self_test-egg-dbus-monitor.obj `if test -f 'egg-dbus-monitor.c'; then $(CYGPATH_W) 'egg-dbus-monitor.c'; else $(CYGPATH_W) '$(srcdir)/egg-dbus-monitor.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-dbus-monitor.Tpo $(DEPDIR)/mate_power_self_test-egg-dbus-monitor.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-dbus-monitor.c' object='mate_power_self_test-egg-dbus-monitor.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-dbus-monitor.obj `if test -f 'egg-dbus-monitor.c'; then $(CYGPATH_W) 'egg-dbus-monitor.c'; else $(CYGPATH_W) '$(srcdir)/egg-dbus-monitor.c'; fi` - -mate_power_self_test-egg-dbus-proxy.o: egg-dbus-proxy.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-dbus-proxy.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-dbus-proxy.Tpo -c -o mate_power_self_test-egg-dbus-proxy.o `test -f 'egg-dbus-proxy.c' || echo '$(srcdir)/'`egg-dbus-proxy.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-dbus-proxy.Tpo $(DEPDIR)/mate_power_self_test-egg-dbus-proxy.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-dbus-proxy.c' object='mate_power_self_test-egg-dbus-proxy.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-dbus-proxy.o `test -f 'egg-dbus-proxy.c' || echo '$(srcdir)/'`egg-dbus-proxy.c - -mate_power_self_test-egg-dbus-proxy.obj: egg-dbus-proxy.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-dbus-proxy.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-dbus-proxy.Tpo -c -o mate_power_self_test-egg-dbus-proxy.obj `if test -f 'egg-dbus-proxy.c'; then $(CYGPATH_W) 'egg-dbus-proxy.c'; else $(CYGPATH_W) '$(srcdir)/egg-dbus-proxy.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-dbus-proxy.Tpo $(DEPDIR)/mate_power_self_test-egg-dbus-proxy.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-dbus-proxy.c' object='mate_power_self_test-egg-dbus-proxy.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-dbus-proxy.obj `if test -f 'egg-dbus-proxy.c'; then $(CYGPATH_W) 'egg-dbus-proxy.c'; else $(CYGPATH_W) '$(srcdir)/egg-dbus-proxy.c'; fi` - -mate_power_self_test-egg-precision.o: egg-precision.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-precision.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-precision.Tpo -c -o mate_power_self_test-egg-precision.o `test -f 'egg-precision.c' || echo '$(srcdir)/'`egg-precision.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-precision.Tpo $(DEPDIR)/mate_power_self_test-egg-precision.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-precision.c' object='mate_power_self_test-egg-precision.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-precision.o `test -f 'egg-precision.c' || echo '$(srcdir)/'`egg-precision.c - -mate_power_self_test-egg-precision.obj: egg-precision.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-precision.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-precision.Tpo -c -o mate_power_self_test-egg-precision.obj `if test -f 'egg-precision.c'; then $(CYGPATH_W) 'egg-precision.c'; else $(CYGPATH_W) '$(srcdir)/egg-precision.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-precision.Tpo $(DEPDIR)/mate_power_self_test-egg-precision.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-precision.c' object='mate_power_self_test-egg-precision.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-precision.obj `if test -f 'egg-precision.c'; then $(CYGPATH_W) 'egg-precision.c'; else $(CYGPATH_W) '$(srcdir)/egg-precision.c'; fi` - -mate_power_self_test-egg-idletime.o: egg-idletime.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-idletime.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-idletime.Tpo -c -o mate_power_self_test-egg-idletime.o `test -f 'egg-idletime.c' || echo '$(srcdir)/'`egg-idletime.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-idletime.Tpo $(DEPDIR)/mate_power_self_test-egg-idletime.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-idletime.c' object='mate_power_self_test-egg-idletime.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-idletime.o `test -f 'egg-idletime.c' || echo '$(srcdir)/'`egg-idletime.c - -mate_power_self_test-egg-idletime.obj: egg-idletime.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-idletime.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-idletime.Tpo -c -o mate_power_self_test-egg-idletime.obj `if test -f 'egg-idletime.c'; then $(CYGPATH_W) 'egg-idletime.c'; else $(CYGPATH_W) '$(srcdir)/egg-idletime.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-idletime.Tpo $(DEPDIR)/mate_power_self_test-egg-idletime.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-idletime.c' object='mate_power_self_test-egg-idletime.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-idletime.obj `if test -f 'egg-idletime.c'; then $(CYGPATH_W) 'egg-idletime.c'; else $(CYGPATH_W) '$(srcdir)/egg-idletime.c'; fi` - -mate_power_self_test-egg-discrete.o: egg-discrete.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-discrete.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-discrete.Tpo -c -o mate_power_self_test-egg-discrete.o `test -f 'egg-discrete.c' || echo '$(srcdir)/'`egg-discrete.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-discrete.Tpo $(DEPDIR)/mate_power_self_test-egg-discrete.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-discrete.c' object='mate_power_self_test-egg-discrete.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-discrete.o `test -f 'egg-discrete.c' || echo '$(srcdir)/'`egg-discrete.c - -mate_power_self_test-egg-discrete.obj: egg-discrete.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-discrete.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-discrete.Tpo -c -o mate_power_self_test-egg-discrete.obj `if test -f 'egg-discrete.c'; then $(CYGPATH_W) 'egg-discrete.c'; else $(CYGPATH_W) '$(srcdir)/egg-discrete.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-discrete.Tpo $(DEPDIR)/mate_power_self_test-egg-discrete.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-discrete.c' object='mate_power_self_test-egg-discrete.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-discrete.obj `if test -f 'egg-discrete.c'; then $(CYGPATH_W) 'egg-discrete.c'; else $(CYGPATH_W) '$(srcdir)/egg-discrete.c'; fi` - -mate_power_self_test-egg-array-float.o: egg-array-float.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-array-float.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-array-float.Tpo -c -o mate_power_self_test-egg-array-float.o `test -f 'egg-array-float.c' || echo '$(srcdir)/'`egg-array-float.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-array-float.Tpo $(DEPDIR)/mate_power_self_test-egg-array-float.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-array-float.c' object='mate_power_self_test-egg-array-float.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-array-float.o `test -f 'egg-array-float.c' || echo '$(srcdir)/'`egg-array-float.c - -mate_power_self_test-egg-array-float.obj: egg-array-float.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-array-float.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-array-float.Tpo -c -o mate_power_self_test-egg-array-float.obj `if test -f 'egg-array-float.c'; then $(CYGPATH_W) 'egg-array-float.c'; else $(CYGPATH_W) '$(srcdir)/egg-array-float.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-array-float.Tpo $(DEPDIR)/mate_power_self_test-egg-array-float.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-array-float.c' object='mate_power_self_test-egg-array-float.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-array-float.obj `if test -f 'egg-array-float.c'; then $(CYGPATH_W) 'egg-array-float.c'; else $(CYGPATH_W) '$(srcdir)/egg-array-float.c'; fi` - -mate_power_self_test-egg-console-kit.o: egg-console-kit.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-console-kit.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-console-kit.Tpo -c -o mate_power_self_test-egg-console-kit.o `test -f 'egg-console-kit.c' || echo '$(srcdir)/'`egg-console-kit.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-console-kit.Tpo $(DEPDIR)/mate_power_self_test-egg-console-kit.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-console-kit.c' object='mate_power_self_test-egg-console-kit.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-console-kit.o `test -f 'egg-console-kit.c' || echo '$(srcdir)/'`egg-console-kit.c - -mate_power_self_test-egg-console-kit.obj: egg-console-kit.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-egg-console-kit.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-egg-console-kit.Tpo -c -o mate_power_self_test-egg-console-kit.obj `if test -f 'egg-console-kit.c'; then $(CYGPATH_W) 'egg-console-kit.c'; else $(CYGPATH_W) '$(srcdir)/egg-console-kit.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-egg-console-kit.Tpo $(DEPDIR)/mate_power_self_test-egg-console-kit.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='egg-console-kit.c' object='mate_power_self_test-egg-console-kit.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-egg-console-kit.obj `if test -f 'egg-console-kit.c'; then $(CYGPATH_W) 'egg-console-kit.c'; else $(CYGPATH_W) '$(srcdir)/egg-console-kit.c'; fi` - -mate_power_self_test-gpm-prefs-server.o: gpm-prefs-server.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-prefs-server.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-prefs-server.Tpo -c -o mate_power_self_test-gpm-prefs-server.o `test -f 'gpm-prefs-server.c' || echo '$(srcdir)/'`gpm-prefs-server.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-prefs-server.Tpo $(DEPDIR)/mate_power_self_test-gpm-prefs-server.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-prefs-server.c' object='mate_power_self_test-gpm-prefs-server.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-prefs-server.o `test -f 'gpm-prefs-server.c' || echo '$(srcdir)/'`gpm-prefs-server.c - -mate_power_self_test-gpm-prefs-server.obj: gpm-prefs-server.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-prefs-server.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-prefs-server.Tpo -c -o mate_power_self_test-gpm-prefs-server.obj `if test -f 'gpm-prefs-server.c'; then $(CYGPATH_W) 'gpm-prefs-server.c'; else $(CYGPATH_W) '$(srcdir)/gpm-prefs-server.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-prefs-server.Tpo $(DEPDIR)/mate_power_self_test-gpm-prefs-server.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-prefs-server.c' object='mate_power_self_test-gpm-prefs-server.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-prefs-server.obj `if test -f 'gpm-prefs-server.c'; then $(CYGPATH_W) 'gpm-prefs-server.c'; else $(CYGPATH_W) '$(srcdir)/gpm-prefs-server.c'; fi` - -mate_power_self_test-gpm-control.o: gpm-control.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-control.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-control.Tpo -c -o mate_power_self_test-gpm-control.o `test -f 'gpm-control.c' || echo '$(srcdir)/'`gpm-control.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-control.Tpo $(DEPDIR)/mate_power_self_test-gpm-control.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-control.c' object='mate_power_self_test-gpm-control.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-control.o `test -f 'gpm-control.c' || echo '$(srcdir)/'`gpm-control.c - -mate_power_self_test-gpm-control.obj: gpm-control.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-control.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-control.Tpo -c -o mate_power_self_test-gpm-control.obj `if test -f 'gpm-control.c'; then $(CYGPATH_W) 'gpm-control.c'; else $(CYGPATH_W) '$(srcdir)/gpm-control.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-control.Tpo $(DEPDIR)/mate_power_self_test-gpm-control.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-control.c' object='mate_power_self_test-gpm-control.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-control.obj `if test -f 'gpm-control.c'; then $(CYGPATH_W) 'gpm-control.c'; else $(CYGPATH_W) '$(srcdir)/gpm-control.c'; fi` - -mate_power_self_test-gpm-networkmanager.o: gpm-networkmanager.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-networkmanager.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-networkmanager.Tpo -c -o mate_power_self_test-gpm-networkmanager.o `test -f 'gpm-networkmanager.c' || echo '$(srcdir)/'`gpm-networkmanager.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-networkmanager.Tpo $(DEPDIR)/mate_power_self_test-gpm-networkmanager.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-networkmanager.c' object='mate_power_self_test-gpm-networkmanager.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-networkmanager.o `test -f 'gpm-networkmanager.c' || echo '$(srcdir)/'`gpm-networkmanager.c - -mate_power_self_test-gpm-networkmanager.obj: gpm-networkmanager.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-networkmanager.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-networkmanager.Tpo -c -o mate_power_self_test-gpm-networkmanager.obj `if test -f 'gpm-networkmanager.c'; then $(CYGPATH_W) 'gpm-networkmanager.c'; else $(CYGPATH_W) '$(srcdir)/gpm-networkmanager.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-networkmanager.Tpo $(DEPDIR)/mate_power_self_test-gpm-networkmanager.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-networkmanager.c' object='mate_power_self_test-gpm-networkmanager.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-networkmanager.obj `if test -f 'gpm-networkmanager.c'; then $(CYGPATH_W) 'gpm-networkmanager.c'; else $(CYGPATH_W) '$(srcdir)/gpm-networkmanager.c'; fi` - -mate_power_self_test-gpm-dpms.o: gpm-dpms.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-dpms.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-dpms.Tpo -c -o mate_power_self_test-gpm-dpms.o `test -f 'gpm-dpms.c' || echo '$(srcdir)/'`gpm-dpms.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-dpms.Tpo $(DEPDIR)/mate_power_self_test-gpm-dpms.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-dpms.c' object='mate_power_self_test-gpm-dpms.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-dpms.o `test -f 'gpm-dpms.c' || echo '$(srcdir)/'`gpm-dpms.c - -mate_power_self_test-gpm-dpms.obj: gpm-dpms.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-dpms.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-dpms.Tpo -c -o mate_power_self_test-gpm-dpms.obj `if test -f 'gpm-dpms.c'; then $(CYGPATH_W) 'gpm-dpms.c'; else $(CYGPATH_W) '$(srcdir)/gpm-dpms.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-dpms.Tpo $(DEPDIR)/mate_power_self_test-gpm-dpms.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-dpms.c' object='mate_power_self_test-gpm-dpms.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-dpms.obj `if test -f 'gpm-dpms.c'; then $(CYGPATH_W) 'gpm-dpms.c'; else $(CYGPATH_W) '$(srcdir)/gpm-dpms.c'; fi` - -mate_power_self_test-gpm-button.o: gpm-button.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-button.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-button.Tpo -c -o mate_power_self_test-gpm-button.o `test -f 'gpm-button.c' || echo '$(srcdir)/'`gpm-button.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-button.Tpo $(DEPDIR)/mate_power_self_test-gpm-button.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-button.c' object='mate_power_self_test-gpm-button.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-button.o `test -f 'gpm-button.c' || echo '$(srcdir)/'`gpm-button.c - -mate_power_self_test-gpm-button.obj: gpm-button.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-button.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-button.Tpo -c -o mate_power_self_test-gpm-button.obj `if test -f 'gpm-button.c'; then $(CYGPATH_W) 'gpm-button.c'; else $(CYGPATH_W) '$(srcdir)/gpm-button.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-button.Tpo $(DEPDIR)/mate_power_self_test-gpm-button.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-button.c' object='mate_power_self_test-gpm-button.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-button.obj `if test -f 'gpm-button.c'; then $(CYGPATH_W) 'gpm-button.c'; else $(CYGPATH_W) '$(srcdir)/gpm-button.c'; fi` - -mate_power_self_test-gpm-screensaver.o: gpm-screensaver.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-screensaver.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-screensaver.Tpo -c -o mate_power_self_test-gpm-screensaver.o `test -f 'gpm-screensaver.c' || echo '$(srcdir)/'`gpm-screensaver.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-screensaver.Tpo $(DEPDIR)/mate_power_self_test-gpm-screensaver.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-screensaver.c' object='mate_power_self_test-gpm-screensaver.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-screensaver.o `test -f 'gpm-screensaver.c' || echo '$(srcdir)/'`gpm-screensaver.c - -mate_power_self_test-gpm-screensaver.obj: gpm-screensaver.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-screensaver.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-screensaver.Tpo -c -o mate_power_self_test-gpm-screensaver.obj `if test -f 'gpm-screensaver.c'; then $(CYGPATH_W) 'gpm-screensaver.c'; else $(CYGPATH_W) '$(srcdir)/gpm-screensaver.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-screensaver.Tpo $(DEPDIR)/mate_power_self_test-gpm-screensaver.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-screensaver.c' object='mate_power_self_test-gpm-screensaver.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-screensaver.obj `if test -f 'gpm-screensaver.c'; then $(CYGPATH_W) 'gpm-screensaver.c'; else $(CYGPATH_W) '$(srcdir)/gpm-screensaver.c'; fi` - -mate_power_self_test-gpm-engine.o: gpm-engine.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-engine.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-engine.Tpo -c -o mate_power_self_test-gpm-engine.o `test -f 'gpm-engine.c' || echo '$(srcdir)/'`gpm-engine.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-engine.Tpo $(DEPDIR)/mate_power_self_test-gpm-engine.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-engine.c' object='mate_power_self_test-gpm-engine.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-engine.o `test -f 'gpm-engine.c' || echo '$(srcdir)/'`gpm-engine.c - -mate_power_self_test-gpm-engine.obj: gpm-engine.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-engine.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-engine.Tpo -c -o mate_power_self_test-gpm-engine.obj `if test -f 'gpm-engine.c'; then $(CYGPATH_W) 'gpm-engine.c'; else $(CYGPATH_W) '$(srcdir)/gpm-engine.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-engine.Tpo $(DEPDIR)/mate_power_self_test-gpm-engine.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-engine.c' object='mate_power_self_test-gpm-engine.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-engine.obj `if test -f 'gpm-engine.c'; then $(CYGPATH_W) 'gpm-engine.c'; else $(CYGPATH_W) '$(srcdir)/gpm-engine.c'; fi` - -mate_power_self_test-gpm-phone.o: gpm-phone.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-phone.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-phone.Tpo -c -o mate_power_self_test-gpm-phone.o `test -f 'gpm-phone.c' || echo '$(srcdir)/'`gpm-phone.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-phone.Tpo $(DEPDIR)/mate_power_self_test-gpm-phone.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-phone.c' object='mate_power_self_test-gpm-phone.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-phone.o `test -f 'gpm-phone.c' || echo '$(srcdir)/'`gpm-phone.c - -mate_power_self_test-gpm-phone.obj: gpm-phone.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-phone.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-phone.Tpo -c -o mate_power_self_test-gpm-phone.obj `if test -f 'gpm-phone.c'; then $(CYGPATH_W) 'gpm-phone.c'; else $(CYGPATH_W) '$(srcdir)/gpm-phone.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-phone.Tpo $(DEPDIR)/mate_power_self_test-gpm-phone.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-phone.c' object='mate_power_self_test-gpm-phone.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-phone.obj `if test -f 'gpm-phone.c'; then $(CYGPATH_W) 'gpm-phone.c'; else $(CYGPATH_W) '$(srcdir)/gpm-phone.c'; fi` - -mate_power_self_test-gpm-idle.o: gpm-idle.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-idle.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-idle.Tpo -c -o mate_power_self_test-gpm-idle.o `test -f 'gpm-idle.c' || echo '$(srcdir)/'`gpm-idle.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-idle.Tpo $(DEPDIR)/mate_power_self_test-gpm-idle.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-idle.c' object='mate_power_self_test-gpm-idle.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-idle.o `test -f 'gpm-idle.c' || echo '$(srcdir)/'`gpm-idle.c - -mate_power_self_test-gpm-idle.obj: gpm-idle.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-idle.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-idle.Tpo -c -o mate_power_self_test-gpm-idle.obj `if test -f 'gpm-idle.c'; then $(CYGPATH_W) 'gpm-idle.c'; else $(CYGPATH_W) '$(srcdir)/gpm-idle.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-idle.Tpo $(DEPDIR)/mate_power_self_test-gpm-idle.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-idle.c' object='mate_power_self_test-gpm-idle.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-idle.obj `if test -f 'gpm-idle.c'; then $(CYGPATH_W) 'gpm-idle.c'; else $(CYGPATH_W) '$(srcdir)/gpm-idle.c'; fi` - -mate_power_self_test-gpm-session.o: gpm-session.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-session.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-session.Tpo -c -o mate_power_self_test-gpm-session.o `test -f 'gpm-session.c' || echo '$(srcdir)/'`gpm-session.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-session.Tpo $(DEPDIR)/mate_power_self_test-gpm-session.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-session.c' object='mate_power_self_test-gpm-session.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-session.o `test -f 'gpm-session.c' || echo '$(srcdir)/'`gpm-session.c - -mate_power_self_test-gpm-session.obj: gpm-session.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-session.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-session.Tpo -c -o mate_power_self_test-gpm-session.obj `if test -f 'gpm-session.c'; then $(CYGPATH_W) 'gpm-session.c'; else $(CYGPATH_W) '$(srcdir)/gpm-session.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-session.Tpo $(DEPDIR)/mate_power_self_test-gpm-session.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-session.c' object='mate_power_self_test-gpm-session.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-session.obj `if test -f 'gpm-session.c'; then $(CYGPATH_W) 'gpm-session.c'; else $(CYGPATH_W) '$(srcdir)/gpm-session.c'; fi` - -mate_power_self_test-gpm-load.o: gpm-load.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-load.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-load.Tpo -c -o mate_power_self_test-gpm-load.o `test -f 'gpm-load.c' || echo '$(srcdir)/'`gpm-load.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-load.Tpo $(DEPDIR)/mate_power_self_test-gpm-load.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-load.c' object='mate_power_self_test-gpm-load.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-load.o `test -f 'gpm-load.c' || echo '$(srcdir)/'`gpm-load.c - -mate_power_self_test-gpm-load.obj: gpm-load.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-load.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-load.Tpo -c -o mate_power_self_test-gpm-load.obj `if test -f 'gpm-load.c'; then $(CYGPATH_W) 'gpm-load.c'; else $(CYGPATH_W) '$(srcdir)/gpm-load.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-load.Tpo $(DEPDIR)/mate_power_self_test-gpm-load.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-load.c' object='mate_power_self_test-gpm-load.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-load.obj `if test -f 'gpm-load.c'; then $(CYGPATH_W) 'gpm-load.c'; else $(CYGPATH_W) '$(srcdir)/gpm-load.c'; fi` - -mate_power_self_test-gpm-marshal.o: gpm-marshal.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-marshal.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-marshal.Tpo -c -o mate_power_self_test-gpm-marshal.o `test -f 'gpm-marshal.c' || echo '$(srcdir)/'`gpm-marshal.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-marshal.Tpo $(DEPDIR)/mate_power_self_test-gpm-marshal.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-marshal.c' object='mate_power_self_test-gpm-marshal.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-marshal.o `test -f 'gpm-marshal.c' || echo '$(srcdir)/'`gpm-marshal.c - -mate_power_self_test-gpm-marshal.obj: gpm-marshal.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-marshal.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-marshal.Tpo -c -o mate_power_self_test-gpm-marshal.obj `if test -f 'gpm-marshal.c'; then $(CYGPATH_W) 'gpm-marshal.c'; else $(CYGPATH_W) '$(srcdir)/gpm-marshal.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-marshal.Tpo $(DEPDIR)/mate_power_self_test-gpm-marshal.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-marshal.c' object='mate_power_self_test-gpm-marshal.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-marshal.obj `if test -f 'gpm-marshal.c'; then $(CYGPATH_W) 'gpm-marshal.c'; else $(CYGPATH_W) '$(srcdir)/gpm-marshal.c'; fi` - -mate_power_self_test-gpm-common.o: gpm-common.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-common.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-common.Tpo -c -o mate_power_self_test-gpm-common.o `test -f 'gpm-common.c' || echo '$(srcdir)/'`gpm-common.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-common.Tpo $(DEPDIR)/mate_power_self_test-gpm-common.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-common.c' object='mate_power_self_test-gpm-common.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-common.o `test -f 'gpm-common.c' || echo '$(srcdir)/'`gpm-common.c - -mate_power_self_test-gpm-common.obj: gpm-common.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-common.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-common.Tpo -c -o mate_power_self_test-gpm-common.obj `if test -f 'gpm-common.c'; then $(CYGPATH_W) 'gpm-common.c'; else $(CYGPATH_W) '$(srcdir)/gpm-common.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-common.Tpo $(DEPDIR)/mate_power_self_test-gpm-common.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-common.c' object='mate_power_self_test-gpm-common.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-common.obj `if test -f 'gpm-common.c'; then $(CYGPATH_W) 'gpm-common.c'; else $(CYGPATH_W) '$(srcdir)/gpm-common.c'; fi` - -mate_power_self_test-gpm-upower.o: gpm-upower.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-upower.o -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-upower.Tpo -c -o mate_power_self_test-gpm-upower.o `test -f 'gpm-upower.c' || echo '$(srcdir)/'`gpm-upower.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-upower.Tpo $(DEPDIR)/mate_power_self_test-gpm-upower.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-upower.c' object='mate_power_self_test-gpm-upower.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-upower.o `test -f 'gpm-upower.c' || echo '$(srcdir)/'`gpm-upower.c - -mate_power_self_test-gpm-upower.obj: gpm-upower.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -MT mate_power_self_test-gpm-upower.obj -MD -MP -MF $(DEPDIR)/mate_power_self_test-gpm-upower.Tpo -c -o mate_power_self_test-gpm-upower.obj `if test -f 'gpm-upower.c'; then $(CYGPATH_W) 'gpm-upower.c'; else $(CYGPATH_W) '$(srcdir)/gpm-upower.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_self_test-gpm-upower.Tpo $(DEPDIR)/mate_power_self_test-gpm-upower.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-upower.c' object='mate_power_self_test-gpm-upower.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_self_test_CFLAGS) $(CFLAGS) -c -o mate_power_self_test-gpm-upower.obj `if test -f 'gpm-upower.c'; then $(CYGPATH_W) 'gpm-upower.c'; else $(CYGPATH_W) '$(srcdir)/gpm-upower.c'; fi` - -mate_power_statistics-gpm-statistics.o: gpm-statistics.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_statistics_CFLAGS) $(CFLAGS) -MT mate_power_statistics-gpm-statistics.o -MD -MP -MF $(DEPDIR)/mate_power_statistics-gpm-statistics.Tpo -c -o mate_power_statistics-gpm-statistics.o `test -f 'gpm-statistics.c' || echo '$(srcdir)/'`gpm-statistics.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_statistics-gpm-statistics.Tpo $(DEPDIR)/mate_power_statistics-gpm-statistics.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-statistics.c' object='mate_power_statistics-gpm-statistics.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_statistics_CFLAGS) $(CFLAGS) -c -o mate_power_statistics-gpm-statistics.o `test -f 'gpm-statistics.c' || echo '$(srcdir)/'`gpm-statistics.c - -mate_power_statistics-gpm-statistics.obj: gpm-statistics.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_statistics_CFLAGS) $(CFLAGS) -MT mate_power_statistics-gpm-statistics.obj -MD -MP -MF $(DEPDIR)/mate_power_statistics-gpm-statistics.Tpo -c -o mate_power_statistics-gpm-statistics.obj `if test -f 'gpm-statistics.c'; then $(CYGPATH_W) 'gpm-statistics.c'; else $(CYGPATH_W) '$(srcdir)/gpm-statistics.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_statistics-gpm-statistics.Tpo $(DEPDIR)/mate_power_statistics-gpm-statistics.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-statistics.c' object='mate_power_statistics-gpm-statistics.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_statistics_CFLAGS) $(CFLAGS) -c -o mate_power_statistics-gpm-statistics.obj `if test -f 'gpm-statistics.c'; then $(CYGPATH_W) 'gpm-statistics.c'; else $(CYGPATH_W) '$(srcdir)/gpm-statistics.c'; fi` - -mate_power_statistics-gpm-point-obj.o: gpm-point-obj.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_statistics_CFLAGS) $(CFLAGS) -MT mate_power_statistics-gpm-point-obj.o -MD -MP -MF $(DEPDIR)/mate_power_statistics-gpm-point-obj.Tpo -c -o mate_power_statistics-gpm-point-obj.o `test -f 'gpm-point-obj.c' || echo '$(srcdir)/'`gpm-point-obj.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_statistics-gpm-point-obj.Tpo $(DEPDIR)/mate_power_statistics-gpm-point-obj.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-point-obj.c' object='mate_power_statistics-gpm-point-obj.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_statistics_CFLAGS) $(CFLAGS) -c -o mate_power_statistics-gpm-point-obj.o `test -f 'gpm-point-obj.c' || echo '$(srcdir)/'`gpm-point-obj.c - -mate_power_statistics-gpm-point-obj.obj: gpm-point-obj.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_statistics_CFLAGS) $(CFLAGS) -MT mate_power_statistics-gpm-point-obj.obj -MD -MP -MF $(DEPDIR)/mate_power_statistics-gpm-point-obj.Tpo -c -o mate_power_statistics-gpm-point-obj.obj `if test -f 'gpm-point-obj.c'; then $(CYGPATH_W) 'gpm-point-obj.c'; else $(CYGPATH_W) '$(srcdir)/gpm-point-obj.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_statistics-gpm-point-obj.Tpo $(DEPDIR)/mate_power_statistics-gpm-point-obj.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-point-obj.c' object='mate_power_statistics-gpm-point-obj.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_statistics_CFLAGS) $(CFLAGS) -c -o mate_power_statistics-gpm-point-obj.obj `if test -f 'gpm-point-obj.c'; then $(CYGPATH_W) 'gpm-point-obj.c'; else $(CYGPATH_W) '$(srcdir)/gpm-point-obj.c'; fi` - -mate_power_statistics-gpm-graph-widget.o: gpm-graph-widget.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_statistics_CFLAGS) $(CFLAGS) -MT mate_power_statistics-gpm-graph-widget.o -MD -MP -MF $(DEPDIR)/mate_power_statistics-gpm-graph-widget.Tpo -c -o mate_power_statistics-gpm-graph-widget.o `test -f 'gpm-graph-widget.c' || echo '$(srcdir)/'`gpm-graph-widget.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_statistics-gpm-graph-widget.Tpo $(DEPDIR)/mate_power_statistics-gpm-graph-widget.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-graph-widget.c' object='mate_power_statistics-gpm-graph-widget.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_statistics_CFLAGS) $(CFLAGS) -c -o mate_power_statistics-gpm-graph-widget.o `test -f 'gpm-graph-widget.c' || echo '$(srcdir)/'`gpm-graph-widget.c - -mate_power_statistics-gpm-graph-widget.obj: gpm-graph-widget.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_statistics_CFLAGS) $(CFLAGS) -MT mate_power_statistics-gpm-graph-widget.obj -MD -MP -MF $(DEPDIR)/mate_power_statistics-gpm-graph-widget.Tpo -c -o mate_power_statistics-gpm-graph-widget.obj `if test -f 'gpm-graph-widget.c'; then $(CYGPATH_W) 'gpm-graph-widget.c'; else $(CYGPATH_W) '$(srcdir)/gpm-graph-widget.c'; fi` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/mate_power_statistics-gpm-graph-widget.Tpo $(DEPDIR)/mate_power_statistics-gpm-graph-widget.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpm-graph-widget.c' object='mate_power_statistics-gpm-graph-widget.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(mate_power_statistics_CFLAGS) $(CFLAGS) -c -o mate_power_statistics-gpm-graph-widget.obj `if test -f 'gpm-graph-widget.c'; then $(CYGPATH_W) 'gpm-graph-widget.c'; else $(CYGPATH_W) '$(srcdir)/gpm-graph-widget.c'; fi` - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -check-TESTS: $(TESTS) - @failed=0; all=0; xfail=0; xpass=0; skip=0; \ - srcdir=$(srcdir); export srcdir; \ - list=' $(TESTS) '; \ - $(am__tty_colors); \ - if test -n "$$list"; then \ - for tst in $$list; do \ - if test -f ./$$tst; then dir=./; \ - elif test -f $$tst; then dir=; \ - else dir="$(srcdir)/"; fi; \ - if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *[\ \ ]$$tst[\ \ ]*) \ - xpass=`expr $$xpass + 1`; \ - failed=`expr $$failed + 1`; \ - col=$$red; res=XPASS; \ - ;; \ - *) \ - col=$$grn; res=PASS; \ - ;; \ - esac; \ - elif test $$? -ne 77; then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *[\ \ ]$$tst[\ \ ]*) \ - xfail=`expr $$xfail + 1`; \ - col=$$lgn; res=XFAIL; \ - ;; \ - *) \ - failed=`expr $$failed + 1`; \ - col=$$red; res=FAIL; \ - ;; \ - esac; \ - else \ - skip=`expr $$skip + 1`; \ - col=$$blu; res=SKIP; \ - fi; \ - echo "$${col}$$res$${std}: $$tst"; \ - done; \ - if test "$$all" -eq 1; then \ - tests="test"; \ - All=""; \ - else \ - tests="tests"; \ - All="All "; \ - fi; \ - if test "$$failed" -eq 0; then \ - if test "$$xfail" -eq 0; then \ - banner="$$All$$all $$tests passed"; \ - else \ - if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ - banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ - fi; \ - else \ - if test "$$xpass" -eq 0; then \ - banner="$$failed of $$all $$tests failed"; \ - else \ - if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ - banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ - fi; \ - fi; \ - dashes="$$banner"; \ - skipped=""; \ - if test "$$skip" -ne 0; then \ - if test "$$skip" -eq 1; then \ - skipped="($$skip test was not run)"; \ - else \ - skipped="($$skip tests were not run)"; \ - fi; \ - test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ - dashes="$$skipped"; \ - fi; \ - report=""; \ - if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ - report="Please report to $(PACKAGE_BUGREPORT)"; \ - test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ - dashes="$$report"; \ - fi; \ - dashes=`echo "$$dashes" | sed s/./=/g`; \ - if test "$$failed" -eq 0; then \ - echo "$$grn$$dashes"; \ - else \ - echo "$$red$$dashes"; \ - fi; \ - echo "$$banner"; \ - test -z "$$skipped" || echo "$$skipped"; \ - test -z "$$report" || echo "$$report"; \ - echo "$$dashes$$std"; \ - test "$$failed" -eq 0; \ - else :; fi - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) - $(MAKE) $(AM_MAKEFLAGS) check-TESTS -check: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) check-am -all-am: Makefile $(LIBRARIES) $(PROGRAMS) -installdirs: - for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-am - -clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \ - clean-libtool clean-local clean-noinstLIBRARIES \ - clean-sbinPROGRAMS mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: install-binPROGRAMS install-sbinPROGRAMS - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binPROGRAMS uninstall-sbinPROGRAMS - -.MAKE: all check check-am install install-am install-strip - -.PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \ - clean-binPROGRAMS clean-checkPROGRAMS clean-generic \ - clean-libtool clean-local clean-noinstLIBRARIES \ - clean-sbinPROGRAMS ctags distclean distclean-compile \ - distclean-generic distclean-libtool distclean-tags distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-binPROGRAMS install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-sbinPROGRAMS install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags uninstall uninstall-am uninstall-binPROGRAMS \ - uninstall-sbinPROGRAMS - - -gpm-marshal.c: gpm-marshal.list - echo "#include \"gpm-marshal.h\"" > $@ && \ - @GLIB_GENMARSHAL@ $< --prefix=gpm_marshal --body >> $@ - -gpm-marshal.h: gpm-marshal.list - @GLIB_GENMARSHAL@ $< --prefix=gpm_marshal --header > $@ - -org.mate.PowerManager.h: org.mate.PowerManager.xml - libtool --mode=execute dbus-binding-tool \ - --prefix=gpm_manager \ - --mode=glib-server \ - --output=org.mate.PowerManager.h \ - $(srcdir)/org.mate.PowerManager.xml - -org.mate.PowerManager.Backlight.h: org.mate.PowerManager.Backlight.xml - libtool --mode=execute dbus-binding-tool \ - --prefix=gpm_backlight \ - --mode=glib-server \ - --output=org.mate.PowerManager.Backlight.h \ - $(srcdir)/org.mate.PowerManager.Backlight.xml - -clean-local: - rm -f *~ - rm -f gpm-marshal.c gpm-marshal.h - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/tools/Makefile.in b/tools/Makefile.in deleted file mode 100644 index 9f250a0..0000000 --- a/tools/Makefile.in +++ /dev/null @@ -1,490 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = tools -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ - $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ - $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ - $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(scriptdir)" -SCRIPTS = $(script_SCRIPTS) -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALL_LINGUAS = @ALL_LINGUAS@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BINDIR = @BINDIR@ -CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ -CANBERRA_LIBS = @CANBERRA_LIBS@ -CATALOGS = @CATALOGS@ -CATOBJEXT = @CATOBJEXT@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DATADIR = @DATADIR@ -DATADIRNAME = @DATADIRNAME@ -DBUS_CFLAGS = @DBUS_CFLAGS@ -DBUS_LIBS = @DBUS_LIBS@ -DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ -DOCBOOK2MAN = @DOCBOOK2MAN@ -DOCDIR = @DOCDIR@ -DOC_USER_FORMATS = @DOC_USER_FORMATS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GDK_CFLAGS = @GDK_CFLAGS@ -GDK_LIBS = @GDK_LIBS@ -GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ -GLIB_CFLAGS = @GLIB_CFLAGS@ -GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ -GLIB_LIBS = @GLIB_LIBS@ -GMOFILES = @GMOFILES@ -GMSGFMT = @GMSGFMT@ -GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ -GREP = @GREP@ -HELP_DIR = @HELP_DIR@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTOBJEXT = @INSTOBJEXT@ -INTLLIBS = @INTLLIBS@ -INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ -INTLTOOL_MERGE = @INTLTOOL_MERGE@ -INTLTOOL_PERL = @INTLTOOL_PERL@ -INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ -LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MATECONFTOOL = @MATECONFTOOL@ -MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ -MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ -MATE_CFLAGS = @MATE_CFLAGS@ -MATE_LIBS = @MATE_LIBS@ -MKDIR_P = @MKDIR_P@ -MKINSTALLDIRS = @MKINSTALLDIRS@ -MSGFMT = @MSGFMT@ -MSGFMT_OPTS = @MSGFMT_OPTS@ -MSGMERGE = @MSGMERGE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OMF_DIR = @OMF_DIR@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PANEL_CFLAGS = @PANEL_CFLAGS@ -PANEL_LIBS = @PANEL_LIBS@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -POFILES = @POFILES@ -POSUB = @POSUB@ -PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ -PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ -RANLIB = @RANLIB@ -SBINDIR = @SBINDIR@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -SYSCONFDIR = @SYSCONFDIR@ -UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ -UNIQUE_LIBS = @UNIQUE_LIBS@ -UPOWER_CFLAGS = @UPOWER_CFLAGS@ -UPOWER_LIBS = @UPOWER_LIBS@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -WARNINGFLAGS = @WARNINGFLAGS@ -WARN_CFLAGS = @WARN_CFLAGS@ -X11_CFLAGS = @X11_CFLAGS@ -X11_LIBS = @X11_LIBS@ -XGETTEXT = @XGETTEXT@ -XMLTO = @XMLTO@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -script_SCRIPTS = \ - mate-power-bugreport.sh - -EXTRA_DIST = $(script_SCRIPTS) -scriptdir = $(bindir) -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign tools/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -install-scriptSCRIPTS: $(script_SCRIPTS) - @$(NORMAL_INSTALL) - test -z "$(scriptdir)" || $(MKDIR_P) "$(DESTDIR)$(scriptdir)" - @list='$(script_SCRIPTS)'; test -n "$(scriptdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n' \ - -e 'h;s|.*|.|' \ - -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) { files[d] = files[d] " " $$1; \ - if (++n[d] == $(am__install_max)) { \ - print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ - else { print "f", d "/" $$4, $$1 } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(scriptdir)$$dir'"; \ - $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(scriptdir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-scriptSCRIPTS: - @$(NORMAL_UNINSTALL) - @list='$(script_SCRIPTS)'; test -n "$(scriptdir)" || exit 0; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 's,.*/,,;$(transform)'`; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(scriptdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(scriptdir)" && rm -f $$files - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(SCRIPTS) -installdirs: - for dir in "$(DESTDIR)$(scriptdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-scriptSCRIPTS - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-scriptSCRIPTS - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-scriptSCRIPTS \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am uninstall-scriptSCRIPTS - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/xmldocs.make b/xmldocs.make deleted file mode 100644 index 0bc375c..0000000 --- a/xmldocs.make +++ /dev/null @@ -1,101 +0,0 @@ -# -# No modifications of this Makefile should be necessary. -# -# To use this template: -# 1) Define: figdir, docname, lang, omffile, and entities in -# your Makefile.am file for each document directory, -# although figdir, omffile, and entities may be empty -# 2) Make sure the Makefile in (1) also includes -# "include $(top_srcdir)/xmldocs.make" and -# "dist-hook: app-dist-hook". -# 3) Optionally define 'entities' to hold xml entities which -# you would also like installed -# 4) Figures must go under $(figdir)/ and be in PNG format -# 5) You should only have one document per directory -# 6) Note that the figure directory, $(figdir)/, should not have its -# own Makefile since this Makefile installs those figures. -# -# example Makefile.am: -# figdir = figures -# docname = scrollkeeper-manual -# lang = C -# omffile=scrollkeeper-manual-C.omf -# entities = fdl.xml -# include $(top_srcdir)/xmldocs.make -# dist-hook: app-dist-hook -# -# About this file: -# This file was taken from scrollkeeper_example2, a package illustrating -# how to install documentation and OMF files for use with ScrollKeeper -# 0.3.x and 0.4.x. For more information, see: -# http://scrollkeeper.sourceforge.net/ -# Version: 0.1.2 (last updated: March 20, 2002) -# - - -# ********** Begin of section some packagers may need to modify ********** -# This variable (docdir) specifies where the documents should be installed. -# This default value should work for most packages. -docdir = $(datadir)/mate/help/$(docname)/$(lang) - -# ********** You should not have to edit below this line ********** -xml_files = $(entities) $(docname).xml - -EXTRA_DIST = $(xml_files) $(omffile) -CLEANFILES = omf_timestamp - -include $(top_srcdir)/omf.make - -all: omf - -$(docname).xml: $(entities) - -ourdir=`pwd`; \ - cd $(srcdir); \ - cp $(entities) $$ourdir - -app-dist-hook: - if test "$(figdir)"; then \ - $(mkinstalldirs) $(distdir)/$(figdir); \ - for file in $(srcdir)/$(figdir)/*.png; do \ - basefile=`echo $$file | sed -e 's,^.*/,,'`; \ - $(INSTALL_DATA) $$file $(distdir)/$(figdir)/$$basefile; \ - done \ - fi - -install-data-local: omf - $(mkinstalldirs) $(DESTDIR)$(docdir) - for file in $(xml_files); do \ - cp $(srcdir)/$$file $(DESTDIR)$(docdir); \ - done - if test "$(figdir)"; then \ - $(mkinstalldirs) $(DESTDIR)$(docdir)/$(figdir); \ - for file in $(srcdir)/$(figdir)/*.png; do \ - basefile=`echo $$file | sed -e 's,^.*/,,'`; \ - $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \ - done \ - fi - -install-data-hook: install-data-hook-omf - -uninstall-local: uninstall-local-doc uninstall-local-omf - -uninstall-local-doc: - -if test "$(figdir)"; then \ - for file in $(srcdir)/$(figdir)/*.png; do \ - basefile=`echo $$file | sed -e 's,^.*/,,'`; \ - rm -f $(DESTDIR)$(docdir)/$(figdir)/$$basefile; \ - done; \ - rmdir $(DESTDIR)$(docdir)/$(figdir); \ - fi - -for file in $(xml_files); do \ - rm -f $(DESTDIR)$(docdir)/$$file; \ - done - -rmdir $(DESTDIR)$(docdir) - -clean-local: clean-local-doc clean-local-omf - -# for non-srcdir builds, remove the copied entities. -clean-local-doc: - if test $(srcdir) != .; then \ - rm -f $(entities); \ - fi |