diff options
Diffstat (limited to 'tools')
| -rw-r--r-- | tools/Makefile.am | 6 | ||||
| -rw-r--r-- | tools/Makefile.in | 490 | ||||
| -rwxr-xr-x | tools/mate-power-bugreport.sh | 90 |
3 files changed, 586 insertions, 0 deletions
diff --git a/tools/Makefile.am b/tools/Makefile.am new file mode 100644 index 0000000..4cfe958 --- /dev/null +++ b/tools/Makefile.am @@ -0,0 +1,6 @@ +script_SCRIPTS = \ + mate-power-bugreport.sh + +EXTRA_DIST=$(script_SCRIPTS) + +scriptdir = $(bindir) diff --git a/tools/Makefile.in b/tools/Makefile.in new file mode 100644 index 0000000..9f250a0 --- /dev/null +++ b/tools/Makefile.in @@ -0,0 +1,490 @@ +# Makefile.in generated by automake 1.11.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = tools +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \ + $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__installdirs = "$(DESTDIR)$(scriptdir)" +SCRIPTS = $(script_SCRIPTS) +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +SOURCES = +DIST_SOURCES = +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +ALL_LINGUAS = @ALL_LINGUAS@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BINDIR = @BINDIR@ +CANBERRA_CFLAGS = @CANBERRA_CFLAGS@ +CANBERRA_LIBS = @CANBERRA_LIBS@ +CATALOGS = @CATALOGS@ +CATOBJEXT = @CATOBJEXT@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DATADIR = @DATADIR@ +DATADIRNAME = @DATADIRNAME@ +DBUS_CFLAGS = @DBUS_CFLAGS@ +DBUS_LIBS = @DBUS_LIBS@ +DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ +DOCBOOK2MAN = @DOCBOOK2MAN@ +DOCDIR = @DOCDIR@ +DOC_USER_FORMATS = @DOC_USER_FORMATS@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GDK_CFLAGS = @GDK_CFLAGS@ +GDK_LIBS = @GDK_LIBS@ +GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +GLIB_CFLAGS = @GLIB_CFLAGS@ +GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ +GLIB_LIBS = @GLIB_LIBS@ +GMOFILES = @GMOFILES@ +GMSGFMT = @GMSGFMT@ +GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@ +GREP = @GREP@ +HELP_DIR = @HELP_DIR@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTOBJEXT = @INSTOBJEXT@ +INTLLIBS = @INTLLIBS@ +INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ +INTLTOOL_MERGE = @INTLTOOL_MERGE@ +INTLTOOL_PERL = @INTLTOOL_PERL@ +INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@ +LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MATECONFTOOL = @MATECONFTOOL@ +MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@ +MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@ +MATE_CFLAGS = @MATE_CFLAGS@ +MATE_LIBS = @MATE_LIBS@ +MKDIR_P = @MKDIR_P@ +MKINSTALLDIRS = @MKINSTALLDIRS@ +MSGFMT = @MSGFMT@ +MSGFMT_OPTS = @MSGFMT_OPTS@ +MSGMERGE = @MSGMERGE@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OMF_DIR = @OMF_DIR@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PANEL_CFLAGS = @PANEL_CFLAGS@ +PANEL_LIBS = @PANEL_LIBS@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +POFILES = @POFILES@ +POSUB = @POSUB@ +PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ +PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ +RANLIB = @RANLIB@ +SBINDIR = @SBINDIR@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +SYSCONFDIR = @SYSCONFDIR@ +UNIQUE_CFLAGS = @UNIQUE_CFLAGS@ +UNIQUE_LIBS = @UNIQUE_LIBS@ +UPOWER_CFLAGS = @UPOWER_CFLAGS@ +UPOWER_LIBS = @UPOWER_LIBS@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +WARNINGFLAGS = @WARNINGFLAGS@ +WARN_CFLAGS = @WARN_CFLAGS@ +X11_CFLAGS = @X11_CFLAGS@ +X11_LIBS = @X11_LIBS@ +XGETTEXT = @XGETTEXT@ +XMLTO = @XMLTO@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +script_SCRIPTS = \ + mate-power-bugreport.sh + +EXTRA_DIST = $(script_SCRIPTS) +scriptdir = $(bindir) +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign tools/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-scriptSCRIPTS: $(script_SCRIPTS) + @$(NORMAL_INSTALL) + test -z "$(scriptdir)" || $(MKDIR_P) "$(DESTDIR)$(scriptdir)" + @list='$(script_SCRIPTS)'; test -n "$(scriptdir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(scriptdir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(scriptdir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-scriptSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(script_SCRIPTS)'; test -n "$(scriptdir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(scriptdir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(scriptdir)" && rm -f $$files + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(SCRIPTS) +installdirs: + for dir in "$(DESTDIR)$(scriptdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-scriptSCRIPTS + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-scriptSCRIPTS + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + distclean distclean-generic distclean-libtool distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-scriptSCRIPTS \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + uninstall uninstall-am uninstall-scriptSCRIPTS + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/tools/mate-power-bugreport.sh b/tools/mate-power-bugreport.sh new file mode 100755 index 0000000..c6c4ce7 --- /dev/null +++ b/tools/mate-power-bugreport.sh @@ -0,0 +1,90 @@ +#! /bin/sh +# Copyright (C) 2006-2007 Richard Hughes <[email protected]> +# +# Licensed under the GNU General Public License Version 2 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +#$1 = keyname +print_hal_key () +{ + udi="/org/freedesktop/Hal/devices/computer" + ret=`hal-get-property --udi $udi --key $1 2> /dev/null` + if [ $? -eq 0 ]; then + echo $ret + else + echo "missing" + fi +} + +#$1 = capability +print_hal_capability () +{ + ret=`hal-find-by-capability --capability $1` + if [ -n "$ret" ]; then + echo "yes" + else + echo "no" + fi +} + +echo -n "Distro version: " +cat /etc/*release | uniq + +echo -n "Kernel version: " +uname -r + +echo -n "g-p-m version: " +mate-power-manager --version | cut -f2 -d" " + +echo -n "HAL version: " +lshal -V | cut -f3 -d" " + +echo -n "System manufacturer: " +print_hal_key "smbios.system.manufacturer" +echo -n "System version: " +print_hal_key "smbios.system.version" +echo -n "System product: " +print_hal_key "smbios.system.product" + +echo -n "AC adapter present: " +print_hal_capability "ac_adapter" + +echo -n "Battery present: " +print_hal_capability "battery" + +echo -n "Laptop panel present: " +print_hal_capability "laptop_panel" + +echo -n "CPU scaling present: " +print_hal_capability "cpufreq_control" + +echo "Battery Information:" +lshal | grep "battery\." + +OS=`uname -s` + +echo "UPower data:" +upower --dump + +echo "MATE Power Manager Process Information:" +if [ "$OS" = "SunOS" ]; then + ptree -a `pgrep power` +else + ps aux --forest | grep mate-power | grep -v grep +fi + +echo "HAL Process Information:" +if [ "$OS" = "SunOS" ]; then + ptree -a `pgrep hald` +else + ps aux --forest | grep hald | grep -v grep +fi |