+ <legalnotice id="legalnotice">

+ <para>

+ Permission is granted to copy, distribute and/or modify this

+ document under the terms of the GNU Free Documentation

+ License (GFDL), Version 1.1 or any later version published

+ by the Free Software Foundation with no Invariant Sections,

+ no Front-Cover Texts, and no Back-Cover Texts. You can find

+ a copy of the GFDL at this <ulink type="help"

+ url="ghelp:fdl">link</ulink> or in the file COPYING-DOCS

+ distributed with this manual.

+ </para>

+ <para> This manual is part of a collection of GNOME manuals

+ distributed under the GFDL. If you want to distribute this

+ manual separately from the collection, you can do so by

+ adding a copy of the license to the manual, as described in

+ section 6 of the license.

+ </para>

+

+ <para>

+ Many of the names used by companies to distinguish their

+ products and services are claimed as trademarks. Where those

+ names appear in any GNOME documentation, and the members of

+ the GNOME Documentation Project are made aware of those

+ trademarks, then the names are in capital letters or initial

+ capital letters.

+ </para>

+

+ <para>

+ DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT ARE PROVIDED

+ UNDER THE TERMS OF THE GNU FREE DOCUMENTATION LICENSE

+ WITH THE FURTHER UNDERSTANDING THAT:

+

+ <orderedlist>

+ <listitem>

+ <para>DOCUMENT IS PROVIDED ON AN "AS IS" BASIS,

+ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR

+ IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES

+ THAT THE DOCUMENT OR MODIFIED VERSION OF THE

+ DOCUMENT IS FREE OF DEFECTS MERCHANTABLE, FIT FOR

+ A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE

+ RISK AS TO THE QUALITY, ACCURACY, AND PERFORMANCE

+ OF THE DOCUMENT OR MODIFIED VERSION OF THE

+ DOCUMENT IS WITH YOU. SHOULD ANY DOCUMENT OR

+ MODIFIED VERSION PROVE DEFECTIVE IN ANY RESPECT,

+ YOU (NOT THE INITIAL WRITER, AUTHOR OR ANY

+ CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY

+ SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER

+ OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS

+ LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED

+ VERSION OF THE DOCUMENT IS AUTHORIZED HEREUNDER

+ EXCEPT UNDER THIS DISCLAIMER; AND

+ </para>

+ </listitem>

+ <listitem>

+ <para>UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL

+ THEORY, WHETHER IN TORT (INCLUDING NEGLIGENCE),

+ CONTRACT, OR OTHERWISE, SHALL THE AUTHOR,

+ INITIAL WRITER, ANY CONTRIBUTOR, OR ANY

+ DISTRIBUTOR OF THE DOCUMENT OR MODIFIED VERSION

+ OF THE DOCUMENT, OR ANY SUPPLIER OF ANY OF SUCH

+ PARTIES, BE LIABLE TO ANY PERSON FOR ANY

+ DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR

+ CONSEQUENTIAL DAMAGES OF ANY CHARACTER

+ INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS

+ OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR

+ MALFUNCTION, OR ANY AND ALL OTHER DAMAGES OR

+ LOSSES ARISING OUT OF OR RELATING TO USE OF THE

+ DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT,

+ EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF

+ THE POSSIBILITY OF SUCH DAMAGES.

+ </para>

+ </listitem>

+ </orderedlist>

+ </para>

+ </legalnotice>

+

+<?xml version="1.0"?>

+<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"

+"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" [

+ <!ENTITY legal SYSTEM "legal.xml">

+ <!ENTITY appletversion "1.6">

+ <!ENTITY manrevision "2.0">

+ <!ENTITY date "January 2006">

+ <!ENTITY applet "GNOME Sensors Applet">

+ <!ENTITY author-name "Alex Murray">

+ <!ENTITY author-email "[email protected]">

+ <!ENTITY project-webpage "http://sensors-applet.sourceforge.net/">

+ <!-- Information about the entities.

+ The legal.xml file contains legal information, there is no need to edit the file.

+ Use the appletversion entity to specify the version of the applet.

+ Use the manrevision entity to specify the revision number of this manual.

+ Use the date entity to specify the release date of this manual.

+ Use the applet entity to specify the name of the applet. -->

+

+]>

+<!--

+ (Do not remove this comment block.)

+ Maintained by the GNOME Documentation Project

+ http://developer.gnome.org/projects/gdp

+ Template version: 2.0 beta

+ Template last modified Feb 06, 2003

+-->

+<!-- =============Document Header ============================= -->

+<article id="index" lang="en">

+ <!-- please do not change the id; for translations, change lang to -->

+ <!-- appropriate code -->

+ <articleinfo>

+ <title>&applet; Manual V&manrevision;</title>

+ <copyright>

+ <year>2006</year>

+ <holder>&author-name;</holder>

+ </copyright>

+ <abstract role="description">

+ <para>&applet; displays readings from temperature, voltage and

+ fan sensors within the panel.</para>

+ </abstract>

+

+ <!-- translators: uncomment this:

+

+ <copyright>

+ <year>2002</year>

+ <holder>ME-THE-TRANSLATOR (Latin translation)</holder>

+ </copyright>

+

+ -->

+ <!-- An address can be added to the publisher information. If a role is

+ not specified, the publisher/author is the same for all versions of the

+ document.

+ <publisher>

+ <publishername> GNOME Documentation Project </publishername>

+ </publisher>

+ -->

+ &legal;

+ <!-- This file contains link to license for the documentation (GNU FDL), and

+ other legal stuff such as "NO WARRANTY" statement. Please do not change

+ any of this. -->

+

+ <authorgroup>

+ <author role="maintainer">

+ <firstname>Alex</firstname>

+ <surname>Murray</surname>

+ <affiliation>

+ <!-- <orgname>GNOME Documentation

+ Project</orgname> -->

+ <!-- The email address of the author is optional and is commented out by default.

+ <address> <email>[email protected]</email> </address>

+ -->

+ </affiliation>

+ </author>

+ <!-- This is appropriate place for other contributors: translators,

+ maintainers, etc. Commented out by default.

+ <othercredit role="translator">

+ <firstname>Latin</firstname>

+ <surname>Translator 1</surname>

+ <affiliation>

+ <orgname>Latin Translation Team</orgname>

+ <address> <email>[email protected]</email> </address>

+ </affiliation>

+ <contrib>Latin translation</contrib>

+ </othercredit>

+ -->

+ </authorgroup>

+ <!-- According to GNU FDL, revision history is mandatory if you are -->

+ <!-- modifying/reusing someone else's document. If not, you can omit it. -->

+ <!-- Remember to remove the &manrevision; entity from the revision entries other

+ -->

+ <!-- than the current revision. -->

+ <!-- The revision numbering system for GNOME manuals is as follows: -->

+ <!-- * the revision number consists of two components -->

+ <!-- * the first component of the revision number reflects the release version of the GNOME desktop. -->

+ <!-- * the second component of the revision number is a decimal unit that is incremented with each revision of the manual. -->

+ <!-- For example, if the GNOME desktop release is V2.x, the first version of the manual that -->

+ <!-- is written in that desktop timeframe is V2.0, the second version of the manual is V2.1, etc. -->

+ <!-- When the desktop release version changes to V3.x, the revision number of the manual changes -->

+ <!-- to V3.0, and so on. -->

+ <revhistory>

+ <revision>

+ <revnumber>&applet; Manual V&manrevision;</revnumber>

+ <date>&date;</date>

+ <revdescription>

+ <para role="author">&author-name;

+

+ <email>&author-email;</email>

+ </para>

+ <!-- <para role="publisher">GNOME Documentation Project</para> -->

+ </revdescription>

+ </revision>

+ </revhistory>

+ <releaseinfo> This manual describes version &appletversion; of &applet;.

+ </releaseinfo>

+ <legalnotice>

+ <title>Feedback</title>

+ <para> To report a bug or make a suggestion regarding &applet; or this

+ manual, follow the directions at the

+ <ulink url="&project-webpage;"

+ type="http">&applet; Project Homepage</ulink>. </para>

+

+ </legalnotice>

+ </articleinfo>

+ <indexterm zone="index">

+ <primary>&applet;</primary>

+ </indexterm>

+ <!-- ============= Document Body ============================= -->

+ <!-- ============= Introduction ============================== -->

+ <sect1 id="sensors-applet-introduction">

+ <title>Introduction</title>

+ <!-- ==== Figure ============================================= -->

+ <figure id="sensors-applet-fig">

+ <title>&applet;</title>

+ <screenshot>

+ <mediaobject>

+ <imageobject>

+ <imagedata fileref="figures/applet_in_panel.png" format="PNG"/>

+ </imageobject>

+ <textobject>

+ <phrase>&applet; with 3 sensors enabled.</phrase>

+ </textobject>

+ </mediaobject>

+ </screenshot>

+ </figure>

+ <!-- ==== End of Figure ======================================= -->

+ <para>

+ <application>&applet;</application> provides a convenient way to

+ monitor the health of your computer in a simple display on your

+ desktop.

+ </para>

+ <para>A number of sensor interfaces are supported, which should be

+ configured before adding &applet; to the panel:

+ <itemizedlist>

+ <listitem>

+ <para>ACPI thermal zones, via the Linux kernel ACPI modules</para>

+ </listitem>

+ <listitem>

+ <!-- i2c modules -->

+ <para>Linux kernel i2c modules</para>

+ <itemizedlist>

+ <listitem>

+ <para>Via the sysfs filesystem and <ulink

+ url="http://secure.netroedge.com/~lm78/kernel26.html"

+ type="http">i2c</ulink> modules distributed directly

+ with the kernel (kernel 2.6)</para>

+ </listitem>

+ <listitem>

+ <para>Via the proc filesystem and i2c modules from the

+ <ulink

+ url="http://secure.netroedge.com/~lm78/kernel26.html"

+ type="http">lm_sensors and i2c</ulink> packages (kernel 2.4)</para>

+ </listitem>

+ <listitem>

+ <para>Via the libsensors library provided with the

+ <ulink

+ url="http://secure.netroedge.com/~lm78/kernel26.html"

+ type="http">lm_sensors</ulink> package

+ </para>

+ </listitem>

+ </itemizedlist>

+ </listitem>

+ <!-- i8k module -->

+ <listitem>

+ <para>Linux kernel <ulink

+ url="http://people.debian.org/~dz/i8k/00-README"

+ type="http">i8k</ulink> module (for Dell Inspiron Laptops).</para>

+ </listitem>

+ <!-- ibm-acpi module -->

+ <listitem>

+ <para>Linux kernel <ulink

+ url="http://ibm-acpi.sourceforge.net/"

+ type="http">ibm-acpi</ulink> module (for IBM Laptops).</para>

+ </listitem>

+ <!-- therm_adt746x and therm_windtunnel -->

+ <listitem>

+ <para>Linux kernel PowerPC modules therm_adt746x and therm_windtunnel.</para>

+ </listitem>

+ <!-- iMac G5 Windfarm -->

+ <listitem>

+ <para>Linux kernel iMac G5 Windfarm module.</para>

+ </listitem>

+ <!-- hddtemp -->

+ <listitem>

+ <para><ulink url="http://www.guzu.net/linux/hddtemp.php"

+ type="http">hddtemp</ulink> daemon for reading temperatures

+ from S.M.A.R.T. equipped disks.</para>

+ </listitem>

+ <!-- Omnibook -->

+ <listitem>

+ <para>Linux kernel <ulink

+ url="http://sourceforge.net/projects/omke">Omnibook</ulink>

+ module. (for HP and Toshiba Satellite Laptops)</para>

+ </listitem>

+ <!-- NVCtrl -->

+ <listitem>

+ <para>NVIDIA graphics cards via libNVCtrl (provided with

+ <ulink

+ url="ftp://download.nvidia.com/XFree86/nvidia-settings/">

+ nvidia-settings</ulink>

+ ).

+ </para>

+ </listitem>

+ </itemizedlist>

+ </para>

+ <para>To add <application>&applet;</application> to a panel right-click on the panel to open the

+ panel pop-up menu, then choose

+ <menuchoice>

+ <guimenu>Add to Panel</guimenu>

+ <guimenuitem>Hardware Sensors Monitor</guimenuitem>

+ </menuchoice>.</para>

+ </sect1>

+ <!-- ================ Usage ================================ -->

+ <!-- Use this section to describe how to use the applet to perform the tasks for

+ which the applet is designed. -->

+ <sect1 id="sensors-applet-usage">

+ <title>Usage</title>

+ <para>When you add <application>&applet;</application> to a panel for the

+ first time, the applet will search for any available sensors to monitor, and will display a sensible default sensor if found (such as the temperature of the CPU).

+ </para>

+ <para>Most users will then want to customize the display to their

+ liking, which can be done via the

+ <menuchoice>

+ <guimenuitem>Preferences</guimenuitem>

+ </menuchoice> menu item

+ (see <xref linkend="sensors-applet-preferences" />).

+ </para>

+ </sect1>

+ <!-- ============= Preferences ============================= -->

+ <!-- Use this section to describe how to customize the applet. -->

+ <sect1 id="sensors-applet-preferences">

+ <title>Preferences</title>

+ <para>To configure <application>&applet;</application>,

+ right-click on the applet, then choose

+ <menuchoice><guimenuitem>Preferences</guimenuitem></menuchoice>

+ from the pop-up menu.</para>

+ <para>The

+ <menuchoice><guimenuitem>Preferences</guimenuitem></menuchoice>

+ window contains the following tabbed sections: </para>

+ <itemizedlist>

+ <listitem>

+ <para>

+ <xref linkend="sensors-applet-general-options"/>

+ </para>

+ </listitem>

+ <listitem>

+ <para>

+ <xref linkend="sensors-applet-sensors"/>

+ </para>

+ </listitem>

+ </itemizedlist>

+ </sect1>

+ <!-- =============== Customization Subsection ================ -->

+ <!-- Use a new section to describe different tabbed sections on the Settings or Preferences

+ dialog. -->

+ <sect1 id="sensors-applet-general-options">

+ <title>General Options</title>

+ <variablelist>

+ <varlistentry>

+ <term>

+ <guilabel>Display sensors in panel as</guilabel>

+ </term>

+ <listitem>

+ <para>This option selects whether to display sensors in

+ the panel with either their label or icon and their value,

+ or to have no identifier for each sensor and just display their

+ values, or simply to display the icon for each sensor. A graph can

+ also be displayed for each sensor, showing the progression of the

+ sensor value over time.</para>

+ <para>Default: icon with value.</para>

+ </listitem>

+ </varlistentry>

+ <varlistentry>

+ <term>

+ <guilabel>Preferred position of sensor values</guilabel>

+ </term>

+ <listitem>

+ <para>Sensors can be display with either their value

+ beside their icon / label, or with the value shown below the icon

+ / label. </para>

+ <para>Default: beside labels / icons.</para>

+

+ <note>

+ <para>If there is not enough room in the panel to use the

+ requested position, the best position to ensure all sensor

+ elements are visible will be used instead.</para>

+ </note>

+ </listitem>

+ </varlistentry>

+ <varlistentry>

+ <term>

+ <guilabel>Graph size (pixels)</guilabel>

+ </term>

+ <listitem>

+ <para>When displaying sensors as graphs, the size of the

+ graph sets either the width of the graph (when displayed on

+ either the top or bottom panel) or the height of the graph (when

+ displayed on the left or right panel).</para>

+ <para>Default: 42 pixels.</para>

+ </listitem>

+ </varlistentry>

+ <varlistentry>

+ <term>

+ <guilabel>Temperature scale</guilabel>

+ </term>

+ <listitem>

+ <para>Which scale to use for temperature sensors (Kelvin,

+ Fahrenheit or Celsius are supported).</para>

+ <para>Default: Celsius.</para>

+ </listitem>

+ </varlistentry>

+ <varlistentry>

+ <term>

+ <guilabel>Update interval</guilabel>

+ </term>

+ <listitem>

+ <para>How often to update the values of each sensor shown

+ within the panel.</para>

+ <para>Default: 2 seconds.</para>

+ </listitem>

+ </varlistentry>

+ <varlistentry>

+ <term>

+ <guilabel>Display notifications</guilabel>

+ </term>

+ <listitem>

+ <para>If enabled, &applet; will display notifications to

+ the user when alarm conditions occur.</para>

+ <para>Default: Enabled.</para>

+ <note>

+ <para>

+Alarms for individual sensors must also be enabled.

+ </para>

+ </note>

+ </listitem>

+ </varlistentry>

+ </variablelist>

+ </sect1>

+ <!-- ============= Customization Subsection ===================== -->

+ <!-- Another tabbed section on the Preferences dialog. -->

+ <sect1 id="sensors-applet-sensors">

+ <title>Sensors</title>

+ <para>The Sensors tab within the preferences window provides the

+ options for configuring each individual sensor. Each sensor is

+ listed under its specific interface, along with:

+ <itemizedlist>

+ <listitem>

+ <para>A fixed ID to identify the sensor within its

+ interface.</para>

+ </listitem>

+ <listitem>

+ <para>A user selectable icon to identify the sensor within

+ the panel.</para>

+ </listitem>

+

+ <listitem>

+ <para>A user editable label to identify the sensor within

+ the panel.</para>

+ </listitem>

+

+ <listitem>

+ <para>A check-box to allow the user to enable / disable

+ monitoring and display of the sensor within the

+ panel.</para>

+ </listitem>

+

+ </itemizedlist>

+ The <guibutton>Properties</guibutton> button allows a

+ specific sensor to be more finely configured, providing a

+ separate window box for this purpose. (see <xref

+ linkend="sensors-applet-sensor-config-dialog" />)

+ </para>

+ <sect2 id="sensors-applet-sensor-config-dialog">

+ <title>Sensor Properties</title>

+

+ <para>Each sensor can be configured with a number of options,

+ including the possibility to scale the sensor value, and to

+ execute an alarm if a certain low or high value is

+ reached. The sensor icon can also be selected if

+ required. The high and low values are used to scale the

+ graph display, as well as set the color for the thermometer

+ displayed within the icons of temperature sensors.</para>

+

+ <para>The sensor value can be scaled in a linear

+ fashion by allowing the user to specify a multiplier

+ and offset for each sensor. As each sensor value is

+ read, it is first multiplied by the 'multiplier' and

+ summed with the 'offset' to produce the final

+ value.</para>

+

+ <variablelist>

+ <varlistentry>

+ <term>

+ <guilabel>Sensor value multiplier</guilabel>

+ </term>

+ <listitem>

+ <para>This option allows the user to specify the

+ multiplier of the sensor value.</para>

+ <para>Default: 1.0</para>

+ </listitem>

+ </varlistentry>

+

+ <varlistentry>

+ <term>

+ <guilabel>Sensor value offset</guilabel>

+ </term>

+ <listitem>

+ <para>This option allows the user to specify the offset

+ for the sensor value.</para>

+ <para>Default: 0.0</para>

+ </listitem>

+ </varlistentry>

+ <varlistentry>

+ <term>

+ <guilabel>Sensor low value</guilabel>

+ </term>

+ <listitem>

+ <para>The value at which to trigger an alarm if the

+ sensor drops below this value. This value is also used to

+ scale the display of the graph and temperature icons.</para>

+ <para>Default: dependent on sensor type</para>

+ </listitem>

+ </varlistentry>

+ <varlistentry>

+ <term>

+ <guilabel>Sensor high value</guilabel>

+ </term>

+ <listitem>

+ <para>The value at which to trigger an alarm if the

+ sensor rises above this value. This value is also used to

+ scale the display of the graph and temperature icons.</para>

+ <para>Default: dependent on sensor type</para>

+ </listitem>

+ </varlistentry>

+ <varlistentry>

+ <term>

+ <guilabel>Enable alarm</guilabel>

+ </term>

+ <listitem>

+ <para>This option allows the user to enable alarm

+ monitoring for this sensor. When the sensor value rises

+ above, or drops below it's high or low values, the alarm

+ condition will occur. This will display a notification

+ to the user (if enabled), and execute the appropriate

+ Alarm Command every Alarm repeat interval

+ seconds.</para>

+ <para>Default: disabled</para>

+ <note>

+ <para>

+ Alarms will only execute for active sensors

+ </para>

+ </note>

+ </listitem>

+ </varlistentry>

+ <varlistentry>

+ <term>

+ <guilabel>Alarm repeat interval (secs)</guilabel>

+ </term>

+ <listitem>

+ <para>

+ How often to execute the alarm command while the alarm

+ condition is met. A value of 0 specifies to execute the

+ alarm once only when the alarm condition occurs.

+ </para>

+ <para>Default: 0 seconds</para>

+ <note>

+ <para>

+ If notifications are also enabled, a notification will

+ be displayed each time the alarm is executed as well

+ to notify the user that the alarm condition has

+ occurred.

+ </para>

+ </note>

+ </listitem>

+ </varlistentry>

+

+ <varlistentry>

+ <term>

+ <guilabel>High alarm command</guilabel>

+ </term>

+ <listitem>

+ <para>The command to be executed at each repeat interval

+ when the sensor value is equal to or above the upper limit.

+ </para>

+ <para>Default: none</para>

+ </listitem>

+ </varlistentry>

+

+ <varlistentry>

+ <term>

+ <guilabel>Low alarm command</guilabel>

+ </term>

+ <listitem>

+ <para>The command to be executed at each repeat interval

+ when the sensor value is equal to or below the lower limit.

+ </para>

+ <para>Default: none</para>

+ <tip>

+ <variablelist>

+ <varlistentry>

+ <term>

+ <guilabel>Play a sound when the alarm occurs</guilabel>

+ </term>

+ <listitem>

+ <para>You can play a sound when the alarm occurs

+ by using the command

+ <command>esdplay</command> which should be

+ available as part of the standard GNOME

+ installation. (Note: If this does not work,

+ you could also try <command>aplay</command>

+ which is the default ALSA sound player).

+

+ <!-- Make sure there is no extra whitespace

+ around these commands as it is a verbose

+ environment - preserves whitespace and

+ carriage returns etc -->

+

+ <screen><userinput><command>esdplay /usr/share/sounds/gnibbles/gobble.wav</command></userinput></screen>

+

+ </para>

+ </listitem>

+ </varlistentry>

+ <varlistentry>

+ <term>

+ <guilabel>Pop-up a window to notify that the

+ alarm has occurred</guilabel>

+ </term>

+ <listitem>

+ <para>

+ The program <command>zenity</command> can be used to create

+ dialog boxes to be displayed on the users current

+ display, and can thus be used to create pop-up

+ style notifications that the alarm has

+ occurred.

+

+ <screen><userinput><command>zenity --warning --title="Sensor Alarm" --text="Sensor Alarm occurred"</command></userinput></screen>

+

+ For more information regarding Zenity please

+ consult the Zenity <ulink type="help"

+ url="ghelp:zenity">documentation</ulink>.

+ </para>

+ </listitem>

+ </varlistentry>

+ <varlistentry>

+ <term>

+ <guilabel>

+ Combine multiple commands into one alarm command

+ </guilabel>

+ </term>

+ <listitem>

+ <para>

+ Multiple commands can be executed one after the

+ other using the "&amp;&amp;" construct to separate

+ them. To play a sound and pop-up a dialog via

+ Zenity the follow command can be used:

+

+ <screen><userinput><command>esdplay /usr/share/sounds/gnibbles/gobble.wav &amp;&amp; zenity --warning --title="Sensor Alarm" --text="Sensor Alarm occurred"</command></userinput></screen>

+

+ </para>

+ </listitem>

+ </varlistentry>

+ </variablelist>

+ </tip>

+ </listitem>

+ </varlistentry>

+ <varlistentry>

+ <term>

+ <guilabel>Sensor icon</guilabel>

+ </term>

+ <listitem>

+ <para>Provides a list of available icons to allow the

+ user to select one to represent this sensor.</para>

+ </listitem>

+ </varlistentry>

+ <varlistentry>

+ <term>

+ <guilabel>Graph color</guilabel>

+ </term>

+ <listitem>

+ <para>The color to use to display the graph for the

+ sensor.</para>

+ <note>

+ <para>To accurately display graphs both the high

+ and low values for the sensor need to be set correctly.

+ </para>

+ </note>

+ </listitem>

+ </varlistentry>

+ </variablelist>

+

+ </sect2>

+ </sect1>

+ <sect1>

+ <title>Advanced Options</title>

+ <para>There are a number of advanced options which can be set to

+ customize the display of sensors within the panel, which are set

+ using the GConf system.</para>

+ <variablelist>

+ <varlistentry>

+ <term><guilabel>Font Size</guilabel></term>

+ <listitem>

+ <para>The font size for labels and values is normally

+ derived from the standard Application Font size of the GNOME

+ Desktop, however this can be overridden. This is done by

+ setting the value of the parameter

+

+ <emphasis>/apps/sensors-applet/font-size</emphasis>

+

+ within the user's GConf database. This can be achieved by

+ the following command, where the font size is specified as

+ the last parameter, and in this case is set to

+ <emphasis>10</emphasis>:

+

+ <!-- CAN"T HAVE ANY LINE BREAKS IN COMMAND -->

+ <screen><userinput><command>gconftool-2 -s /apps/sensors-applet/font-size -t int 10</command></userinput></screen>

+ </para>

+

+ <note>

+ <para>To reset the value so that the default font size is

+ not overridden, a font size of <emphasis>0</emphasis>

+ should be set.

+ </para>

+ </note>

+

+ </listitem>

+ </varlistentry>

+ <varlistentry>

+ <term><guilabel>Hide Units</guilabel></term>

+ <listitem>

+ <para>The units for sensor values can also be hidden if

+ desired by setting the boolean value

+

+ <emphasis>/apps/sensors-applet/hide-units</emphasis>

+

+ within the user's GConf database. This can be achieved by

+ the following command, where the value is specified as

+ either <emphasis>true</emphasis> or

+ <emphasis>false</emphasis> and is specified as the last

+ parameter. In this case is the units will be hidden (the

+ value is set to <emphasis>true</emphasis>):

+ <!-- CAN"T HAVE ANY LINE BREAKS IN COMMAND -->

+ <screen><userinput><command>gconftool-2 -s /apps/sensors-applet/hide-units -t bool true</command></userinput></screen>

+ </para>

+ </listitem>

+ </varlistentry>

+ </variablelist>

+ <note>

+ <para>These values can also be set using the <ulink type="help"

+ url="ghelp:gconf-editor">Configuration Editor</ulink>

+ application.

+ </para>

+ </note>

+ </sect1>

+ <!-- ============= Bugs ================================== -->

+ <!-- This section is optional and is commented out by default.

+ You can use it to describe known bugs and limitations of the

+ program if there are any - please be frank and list all

+ problems you know of.

+

+ <sect1 id="myapplet-bugs">

+ <title>Known Bugs and Limitations</title>

+ <para> </para>

+ </sect1>

+ -->

+ <!-- ============= About ================================== -->

+ <!-- This section contains info about the program (not docs), such as

+ author's name(s), web page, license, feedback address. This

+ section is optional: primary place for this info is "About.." box of

+ the program. However, if you do wish to include this info in the

+ manual, this is the place to put it. Alternatively, you can put this

+ information in the title page.-->

+

+ <sect1 id="myapplet-about">

+ <title>About &applet;</title>

+ <para>

+ <application>&applet;</application> was written by Alex Murray

+ (<email>[email protected]</email>). To find more information about

+ <application>&applet;</application>, please visit the <ulink

+ url="&project-webpage;" type="http">&applet; Project

+ Homepage</ulink>.

+ </para>

+ <para> To report a bug or make a suggestion regarding &applet; or this

+ manual, follow the directions at the

+ <ulink url="&project-webpage;"

+ type="http">project homepage</ulink>. </para>

+

+ <!-- For translations: uncomment this:

+

+ <para>

+ Latin translation was done by ME

+ (<email>MYNAME@MYADDRESS</email>). Please send all comments and

+ suggestions regarding this translation to SOMEWHERE.

+ </para>

+

+ -->

+

+ <para>

+ This program is distributed under the terms of the GNU General

+ Public license as published by the Free Software Foundation;

+ either version 2 of the License, or (at your option) any later

+ version. A copy of this license can be found at this <ulink

+ type="help" url="ghelp:gpl">link</ulink>, or in the file COPYING

+ included with the source code of this program.

+ </para>

+ </sect1>

+

+</article>

+<!-- OVERRIDE DICTIONARY SETTING SO THAT USE AMERICAN ENGLISH STYLE - -->

+<!-- FROM GNOME HIG -->

+<!-- Local IspellDict: english -->

+<!-- LocalWords: hddtemp filesystem proc lm README Inspiron windtunnel -->

+<!-- LocalWords: ibm ACPI sysfs PowerPC adt Omnibook NVIDIA -->

+<!-- LocalWords: libNVCtrl libsensors nvidia esdplay aplay ALSA zenity -->

+<!-- LocalWords: acpi iMac Windfarm nvidia gconftool GConf bool -->

+2005-11-08 Alex Murray <[email protected]>

+

+ * Switched to gnome-doc-utils

+

+include $(top_srcdir)/gnome-doc-utils.make

+dist-hook: doc-dist-hook

+

+DOC_MODULE = sensors-applet

+DOC_ENTITIES = legal.xml

+DOC_FIGURES = figures/applet_in_panel.png

+DOC_INCLUDES =

+DOC_LINGUAS =

+# Makefile.in generated by automake 1.11.1 from Makefile.am.

+# @configure_input@

+

+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,

+# Inc.

+# This Makefile.in is free software; the Free Software Foundation

+# gives unlimited permission to copy and/or distribute it,

+# with or without modifications, as long as this notice is preserved.

+

+# This program is distributed in the hope that it will be useful,

+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

+# PARTICULAR PURPOSE.

+

+@SET_MAKE@

+

+# gnome-doc-utils.make - make magic for building documentation

+# Copyright (C) 2004-2005 Shaun McCance <[email protected]>

+#

+# This program is free software; you can redistribute it and/or modify

+# it under the terms of the GNU General Public License as published by

+# the Free Software Foundation; either version 2 of the License, or

+# (at your option) any later version.

+#

+# This program is distributed in the hope that it will be useful,

+# but WITHOUT ANY WARRANTY; without even the implied warranty of

+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

+# GNU General Public License for more details.

+#

+# You should have received a copy of the GNU General Public License

+# along with this program; if not, write to the Free Software Foundation,

+# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

+#

+# As a special exception to the GNU General Public License, if you

+# distribute this file as part of a program that contains a

+# configuration script generated by Autoconf, you may include it under

+# the same distribution terms that you use for the rest of that program.

+

+################################################################################

+VPATH = @srcdir@

+pkgdatadir = $(datadir)/@PACKAGE@

+pkgincludedir = $(includedir)/@PACKAGE@

+pkglibdir = $(libdir)/@PACKAGE@

+pkglibexecdir = $(libexecdir)/@PACKAGE@

+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

+install_sh_DATA = $(install_sh) -c -m 644

+install_sh_PROGRAM = $(install_sh) -c

+install_sh_SCRIPT = $(install_sh) -c

+INSTALL_HEADER = $(INSTALL_DATA)

+transform = $(program_transform_name)

+NORMAL_INSTALL = :

+PRE_INSTALL = :

+POST_INSTALL = :

+NORMAL_UNINSTALL = :

+PRE_UNINSTALL = :

+POST_UNINSTALL = :

+build_triplet = @build@

+host_triplet = @host@

+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \

+ $(top_srcdir)/gnome-doc-utils.make ChangeLog

+subdir = help

+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

+am__aclocal_m4_deps = $(top_srcdir)/configure.ac

+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

+ $(ACLOCAL_M4)

+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs

+CONFIG_HEADER = $(top_builddir)/sensors-applet/config.h

+CONFIG_CLEAN_FILES =

+CONFIG_CLEAN_VPATH_FILES =

+SOURCES =

+DIST_SOURCES =

+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

+ACLOCAL = @ACLOCAL@

+ALL_LINGUAS = @ALL_LINGUAS@

+AMTAR = @AMTAR@

+AR = @AR@

+ATICONFIG_EXE = @ATICONFIG_EXE@

+AUTOCONF = @AUTOCONF@

+AUTOHEADER = @AUTOHEADER@

+AUTOMAKE = @AUTOMAKE@

+AWK = @AWK@

+CAIRO_CFLAGS = @CAIRO_CFLAGS@

+CAIRO_LIBS = @CAIRO_LIBS@

+CATALOGS = @CATALOGS@

+CATOBJEXT = @CATOBJEXT@

+CC = @CC@

+CCDEPMODE = @CCDEPMODE@

+CFLAGS = @CFLAGS@

+CPP = @CPP@

+CPPFLAGS = @CPPFLAGS@

+CYGPATH_W = @CYGPATH_W@

+DATADIRNAME = @DATADIRNAME@

+DBUSGLIB_CFLAGS = @DBUSGLIB_CFLAGS@

+DBUSGLIB_LIBS = @DBUSGLIB_LIBS@

+DEFS = @DEFS@

+DEPDIR = @DEPDIR@

+DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@

+DOC_USER_FORMATS = @DOC_USER_FORMATS@

+DSYMUTIL = @DSYMUTIL@

+DUMPBIN = @DUMPBIN@

+ECHO_C = @ECHO_C@

+ECHO_N = @ECHO_N@

+ECHO_T = @ECHO_T@

+EGREP = @EGREP@

+EXEEXT = @EXEEXT@

+FGREP = @FGREP@

+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@

+GLIB_CFLAGS = @GLIB_CFLAGS@

+GLIB_LIBS = @GLIB_LIBS@

+GMOFILES = @GMOFILES@

+GMSGFMT = @GMSGFMT@

+GNOME_CFLAGS = @GNOME_CFLAGS@

+GNOME_LIBS = @GNOME_LIBS@

+GREP = @GREP@

+GTK_CFLAGS = @GTK_CFLAGS@

+GTK_LIBS = @GTK_LIBS@

+HELP_DIR = @HELP_DIR@

+INSTALL = @INSTALL@

+INSTALL_DATA = @INSTALL_DATA@

+INSTALL_PROGRAM = @INSTALL_PROGRAM@

+INSTALL_SCRIPT = @INSTALL_SCRIPT@

+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

+INSTOBJEXT = @INSTOBJEXT@

+INTLLIBS = @INTLLIBS@

+INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@

+INTLTOOL_MERGE = @INTLTOOL_MERGE@

+INTLTOOL_PERL = @INTLTOOL_PERL@

+INTLTOOL_UPDATE = @INTLTOOL_UPDATE@

+LD = @LD@

+LDFLAGS = @LDFLAGS@

+LIBATASMART_CFLAGS = @LIBATASMART_CFLAGS@

+LIBATASMART_LIBS = @LIBATASMART_LIBS@

+LIBNOTIFY_CFLAGS = @LIBNOTIFY_CFLAGS@

+LIBNOTIFY_LIBS = @LIBNOTIFY_LIBS@

+LIBOBJS = @LIBOBJS@

+LIBS = @LIBS@

+LIBSENSORS_CFLAGS = @LIBSENSORS_CFLAGS@

+LIBSENSORS_LIBS = @LIBSENSORS_LIBS@

+LIBTOOL = @LIBTOOL@

+LIPO = @LIPO@

+LN_S = @LN_S@

+LTLIBOBJS = @LTLIBOBJS@

+MAINT = @MAINT@

+MAKEINFO = @MAKEINFO@

+MKDIR_P = @MKDIR_P@

+MKINSTALLDIRS = @MKINSTALLDIRS@

+MSGFMT = @MSGFMT@

+MSGFMT_OPTS = @MSGFMT_OPTS@

+MSGMERGE = @MSGMERGE@

+NM = @NM@

+NMEDIT = @NMEDIT@

+NVIDIA_CFLAGS = @NVIDIA_CFLAGS@

+NVIDIA_LIBS = @NVIDIA_LIBS@

+OBJDUMP = @OBJDUMP@

+OBJEXT = @OBJEXT@

+OMF_DIR = @OMF_DIR@

+OTOOL = @OTOOL@

+OTOOL64 = @OTOOL64@

+PACKAGE = @PACKAGE@

+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

+PACKAGE_NAME = @PACKAGE_NAME@

+PACKAGE_STRING = @PACKAGE_STRING@

+PACKAGE_TARNAME = @PACKAGE_TARNAME@

+PACKAGE_URL = @PACKAGE_URL@

+PACKAGE_VERSION = @PACKAGE_VERSION@

+PATH_SEPARATOR = @PATH_SEPARATOR@

+PKG_CONFIG = @PKG_CONFIG@

+PLUGIN_LIBTOOL_FLAGS = @PLUGIN_LIBTOOL_FLAGS@

+POFILES = @POFILES@

+POSUB = @POSUB@

+PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@

+PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@

+RANLIB = @RANLIB@

+SED = @SED@

+SET_MAKE = @SET_MAKE@

+SHELL = @SHELL@

+STRIP = @STRIP@

+USE_NLS = @USE_NLS@

+VERSION = @VERSION@

+WARN_CFLAGS = @WARN_CFLAGS@

+XGETTEXT = @XGETTEXT@

+XSLTPROC = @XSLTPROC@

+abs_builddir = @abs_builddir@

+abs_srcdir = @abs_srcdir@

+abs_top_builddir = @abs_top_builddir@

+abs_top_srcdir = @abs_top_srcdir@

+ac_ct_CC = @ac_ct_CC@

+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@

+am__include = @am__include@

+am__leading_dot = @am__leading_dot@

+am__quote = @am__quote@

+am__tar = @am__tar@

+am__untar = @am__untar@

+bindir = @bindir@

+build = @build@

+build_alias = @build_alias@

+build_cpu = @build_cpu@

+build_os = @build_os@

+build_vendor = @build_vendor@

+builddir = @builddir@

+datadir = @datadir@

+datarootdir = @datarootdir@

+docdir = @docdir@

+dvidir = @dvidir@

+exec_prefix = @exec_prefix@

+host = @host@

+host_alias = @host_alias@

+host_cpu = @host_cpu@

+host_os = @host_os@

+host_vendor = @host_vendor@

+htmldir = @htmldir@

+includedir = @includedir@

+infodir = @infodir@

+install_sh = @install_sh@

+libdir = @libdir@

+libexecdir = @libexecdir@

+localedir = @localedir@

+localstatedir = @localstatedir@

+lt_ECHO = @lt_ECHO@

+mandir = @mandir@

+mkdir_p = @mkdir_p@

+oldincludedir = @oldincludedir@

+pdfdir = @pdfdir@

+prefix = @prefix@

+program_transform_name = @program_transform_name@

+psdir = @psdir@

+sbindir = @sbindir@

+sharedstatedir = @sharedstatedir@

+srcdir = @srcdir@

+sysconfdir = @sysconfdir@

+target_alias = @target_alias@

+top_build_prefix = @top_build_prefix@

+top_builddir = @top_builddir@

+top_srcdir = @top_srcdir@

+_clean_doc_header = $(if $(DOC_H_FILE),clean-doc-header)

+_DOC_REAL_FORMATS = $(if $(DOC_USER_FORMATS),$(DOC_USER_FORMATS),$(DOC_FORMATS))

+_DOC_REAL_LINGUAS = $(if $(filter environment,$(origin LINGUAS)), \

+ $(filter $(LINGUAS),$(DOC_LINGUAS)), \

+ $(DOC_LINGUAS))

+

+_DOC_ABS_SRCDIR = @abs_srcdir@

+_xml2po_mode = $(if $(DOC_ID),mallard,docbook)

+@ENABLE_SK_TRUE@_ENABLE_SK = true

+

+################################################################################

+db2omf_args = \

+ --stringparam db2omf.basename $(DOC_MODULE) \

+ --stringparam db2omf.format $(3) \

+ --stringparam db2omf.dtd \

+ $(shell xmllint --format $(2) | grep -h PUBLIC | head -n 1 \

+ | sed -e 's/.*PUBLIC \(\"[^\"]*\"\).*/\1/') \

+ --stringparam db2omf.lang $(notdir $(patsubst %/$(notdir $(2)),%,$(2))) \

+ --stringparam db2omf.omf_dir "$(OMF_DIR)" \

+ --stringparam db2omf.help_dir "$(HELP_DIR)" \

+ --stringparam db2omf.omf_in "$(_DOC_OMF_IN)" \

+ $(if $(_ENABLE_SK), \

+ --stringparam db2omf.scrollkeeper_cl "$(_skcontentslist)") \

+ $(_db2omf) $(2)

+

+_DOC_OMF_IN = $(if $(DOC_MODULE),$(wildcard $(_DOC_ABS_SRCDIR)/$(DOC_MODULE).omf.in))

+_DOC_OMF_DB = $(if $(_DOC_OMF_IN), \

+ $(foreach lc,C $(_DOC_REAL_LINGUAS),$(DOC_MODULE)-$(lc).omf))

+

+_DOC_OMF_HTML = $(if $(_DOC_OMF_IN), \

+ $(foreach lc,C $(_DOC_REAL_LINGUAS),$(DOC_MODULE)-html-$(lc).omf))

+

+

+# FIXME

+_DOC_OMF_ALL = \

+ $(if $(filter docbook,$(_DOC_REAL_FORMATS)),$(_DOC_OMF_DB)) \

+ $(if $(filter html HTML,$(_DOC_REAL_FORMATS)),$(_DOC_OMF_HTML))

+

+

+################################################################################

+_DOC_C_MODULE = $(if $(DOC_MODULE),C/$(DOC_MODULE).xml)

+_DOC_C_PAGES = $(foreach page,$(DOC_PAGES),C/$(page))

+_DOC_C_ENTITIES = $(foreach ent,$(DOC_ENTITIES),C/$(ent))

+_DOC_C_INCLUDES = $(foreach inc,$(DOC_INCLUDES),C/$(inc))

+_DOC_C_DOCS = \

+ $(_DOC_C_ENTITIES) $(_DOC_C_INCLUDES) \

+ $(_DOC_C_PAGES) $(_DOC_C_MODULE)

+

+_DOC_C_DOCS_NOENT = \

+ $(_DOC_C_MODULE) $(_DOC_C_INCLUDES) \

+ $(_DOC_C_PAGES)

+

+_DOC_C_FIGURES = $(if $(DOC_FIGURES), \

+ $(foreach fig,$(DOC_FIGURES),C/$(fig)), \

+ $(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/C/figures/*.png)))

+

+

+# FIXME: probably have to shell escape to determine the file names

+_DOC_C_HTML = $(foreach f, \

+ $(shell xsltproc --xinclude \

+ --stringparam db.chunk.basename "$(DOC_MODULE)" \

+ $(_chunks) "C/$(DOC_MODULE).xml"), \

+ C/$(f).xhtml)

+

+

+###############################################################################

+_DOC_POFILES = $(if $(DOC_MODULE)$(DOC_ID), \

+ $(foreach lc,$(_DOC_REAL_LINGUAS),$(lc)/$(lc).po))

+

+_DOC_MOFILES = $(patsubst %.po,%.mo,$(_DOC_POFILES))

+_DOC_LC_MODULES = $(if $(DOC_MODULE), \

+ $(foreach lc,$(_DOC_REAL_LINGUAS),$(lc)/$(DOC_MODULE).xml))

+

+_DOC_LC_PAGES = \

+ $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach page,$(_DOC_C_PAGES), \

+ $(lc)/$(notdir $(page)) ))

+

+_DOC_LC_INCLUDES = \

+ $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach inc,$(_DOC_C_INCLUDES), \

+ $(lc)/$(notdir $(inc)) ))

+

+

+# FIXME: probably have to shell escape to determine the file names

+_DOC_LC_HTML = \

+ $(foreach lc,$(_DOC_REAL_LINGUAS),$(foreach doc,$(_DOC_C_HTML), \

+ $(lc)/$(notdir $(doc)) ))

+

+_DOC_LC_DOCS = \

+ $(_DOC_LC_MODULES) $(_DOC_LC_INCLUDES) $(_DOC_LC_PAGES) \

+ $(if $(filter html HTML,$(_DOC_REAL_FORMATS)),$(_DOC_LC_HTML))

+

+_DOC_LC_FIGURES = $(foreach lc,$(_DOC_REAL_LINGUAS), \

+ $(patsubst C/%,$(lc)/%,$(_DOC_C_FIGURES)) )

+

+_DOC_SRC_FIGURES = \

+ $(foreach fig,$(_DOC_C_FIGURES), $(foreach lc,C $(_DOC_REAL_LINGUAS), \

+ $(wildcard $(srcdir)/$(lc)/$(patsubst C/%,%,$(fig))) ))

+

+_DOC_POT = $(if $(DOC_MODULE),$(DOC_MODULE).pot)

+

+################################################################################

+_DOC_HTML_ALL = $(if $(filter html HTML,$(_DOC_REAL_FORMATS)), \

+ $(_DOC_C_HTML) $(_DOC_LC_HTML))

+

+_DOC_HTML_TOPS = $(foreach lc,C $(_DOC_REAL_LINGUAS),$(lc)/$(DOC_MODULE).xhtml)

+_clean_omf = $(if $(_DOC_OMF_IN),clean-doc-omf)

+_clean_dsk = $(if $(_DOC_DSK_IN),clean-doc-dsk)

+_clean_lc = $(if $(_DOC_REAL_LINGUAS),clean-doc-lc)

+_clean_dir = $(if $(DOC_MODULE)$(DOC_ID),clean-doc-dir)

+_doc_install_dir = $(if $(DOC_ID),$(DOC_ID),$(DOC_MODULE))

+DOC_MODULE = sensors-applet

+DOC_ENTITIES = legal.xml

+DOC_FIGURES = figures/applet_in_panel.png

+DOC_INCLUDES =

+DOC_LINGUAS =

+all: all-am

+

+.SUFFIXES:

+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/gnome-doc-utils.make $(am__configure_deps)

+ @for dep in $?; do \

+ case '$(am__configure_deps)' in \

+ *$$dep*) \

+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \

+ && { if test -f $@; then exit 0; else break; fi; }; \

+ exit 1;; \

+ esac; \

+ done; \

+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu help/Makefile'; \

+ $(am__cd) $(top_srcdir) && \

+ $(AUTOMAKE) --gnu help/Makefile

+.PRECIOUS: Makefile

+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

+ @case '$?' in \

+ *config.status*) \

+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \

+ *) \

+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \

+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \

+ esac;

+

+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

+

+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)

+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)

+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

+$(am__aclocal_m4_deps):

+

+mostlyclean-libtool:

+ -rm -f *.lo

+

+clean-libtool:

+ -rm -rf .libs _libs

+tags: TAGS

+TAGS:

+

+ctags: CTAGS

+CTAGS:

+

+

+distdir: $(DISTFILES)

+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

+ list='$(DISTFILES)'; \

+ dist_files=`for file in $$list; do echo $$file; done | \

+ sed -e "s|^$$srcdirstrip/||;t" \

+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

+ case $$dist_files in \

+ */*) $(MKDIR_P) `echo "$$dist_files" | \

+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

+ sort -u` ;; \

+ esac; \

+ for file in $$dist_files; do \

+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

+ if test -d $$d/$$file; then \

+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

+ if test -d "$(distdir)/$$file"; then \

+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

+ fi; \

+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

+ fi; \

+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

+ else \

+ test -f "$(distdir)/$$file" \

+ || cp -p $$d/$$file "$(distdir)/$$file" \

+ || exit 1; \

+ fi; \

+ done

+ $(MAKE) $(AM_MAKEFLAGS) \

+ top_distdir="$(top_distdir)" distdir="$(distdir)" \

+ dist-hook

+check-am: all-am

+check: check-am

+all-am: Makefile

+installdirs:

+install: install-am

+install-exec: install-exec-am

+install-data: install-data-am

+uninstall: uninstall-am

+

+install-am: all-am

+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

+

+installcheck: installcheck-am

+install-strip:

+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

+ `test -z '$(STRIP)' || \

+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install

+mostlyclean-generic:

+

+clean-generic:

+

+distclean-generic:

+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

+

+maintainer-clean-generic:

+ @echo "This command is intended for maintainers to use"

+ @echo "it deletes files that may require special tools to rebuild."

+clean: clean-am

+

+clean-am: clean-generic clean-libtool clean-local mostlyclean-am

+

+distclean: distclean-am

+ -rm -f Makefile

+distclean-am: clean-am distclean-generic distclean-local

+

+dvi: dvi-am

+

+dvi-am:

+

+html: html-am

+

+html-am:

+

+info: info-am

+

+info-am:

+

+install-data-am: install-data-local

+

+install-dvi: install-dvi-am

+

+install-dvi-am:

+

+install-exec-am:

+

+install-html: install-html-am

+

+install-html-am:

+

+install-info: install-info-am

+

+install-info-am:

+

+install-man:

+

+install-pdf: install-pdf-am

+

+install-pdf-am:

+

+install-ps: install-ps-am

+

+install-ps-am:

+

+installcheck-am:

+

+maintainer-clean: maintainer-clean-am

+ -rm -f Makefile

+maintainer-clean-am: distclean-am maintainer-clean-generic \

+ maintainer-clean-local

+

+mostlyclean: mostlyclean-am

+

+mostlyclean-am: mostlyclean-generic mostlyclean-libtool \

+ mostlyclean-local

+

+pdf: pdf-am

+

+pdf-am:

+

+ps: ps-am

+

+ps-am:

+

+uninstall-am: uninstall-local

+

+.MAKE: install-am install-strip

+

+.PHONY: all all-am check check-am clean clean-generic clean-libtool \

+ clean-local dist-hook distclean distclean-generic \

+ distclean-libtool distclean-local distdir dvi dvi-am html \

+ html-am info info-am install install-am install-data \

+ install-data-am install-data-local install-dvi install-dvi-am \

+ install-exec install-exec-am install-html install-html-am \

+ install-info install-info-am install-man install-pdf \

+ install-pdf-am install-ps install-ps-am install-strip \

+ installcheck installcheck-am installdirs maintainer-clean \

+ maintainer-clean-generic maintainer-clean-local mostlyclean \

+ mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \

+ pdf-am ps ps-am uninstall uninstall-am uninstall-local

+

+

+DOC_H_FILE ?=

+

+DOC_H_DOCS ?=

+

+$(DOC_H_FILE): $(DOC_H_DOCS);

+ @rm -f [email protected]; touch [email protected];

+ echo 'const gchar* documentation_credits[] = {' >> [email protected]

+ list='$(DOC_H_DOCS)'; for doc in $$list; do \

+ xmlpath="`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`:$(srcdir)/`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`"; \

+ if ! test -f "$$doc"; then doc="$(srcdir)/$$doc"; fi; \

+ xsltproc --path "$$xmlpath" $(_credits) $$doc; \

+ done | sort | uniq \

+ | awk 'BEGIN{s=""}{n=split($$0,w,"<");if(s!=""&&s!=substr(w[1],1,length(w[1])-1)){print s};if(n>1){print $$0;s=""}else{s=$$0}};END{if(s!=""){print s}}' \

+ | sed -e 's/\\/\\\\/' -e 's/"/\\"/' -e 's/\(.*\)/\t"\1",/' >> [email protected]

+ echo ' NULL' >> [email protected]

+ echo '};' >> [email protected]

+ echo >> [email protected]

+ list='$(DOC_H_DOCS)'; for doc in $$list; do \

+ xmlpath="`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`:$(srcdir)/`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`"; \

+ if ! test -f "$$doc"; then doc="$(srcdir)/$$doc"; fi; \

+ docid=`echo "$$doc" | sed -e 's/.*\/\([^/]*\)\.xml/\1/' \

+ | sed -e 's/[^a-zA-Z_]/_/g' | tr 'a-z' 'A-Z'`; \

+ echo $$xmlpath; \

+ ids=`xsltproc --xinclude --path "$$xmlpath" $(_ids) $$doc`; \

+ for id in $$ids; do \

+ echo '#define HELP_'`echo $$docid`'_'`echo $$id \

+ | sed -e 's/[^a-zA-Z_]/_/g' | tr 'a-z' 'A-Z'`' "'$$id'"' >> [email protected]; \

+ done; \

+ echo >> [email protected]; \

+ done;

+ cp [email protected] $@ && rm -f [email protected]

+

+dist-check-gdu:

+@HAVE_GNOME_DOC_UTILS_FALSE@ @echo "*** GNOME Doc Utils must be installed in order to make dist"

+@HAVE_GNOME_DOC_UTILS_FALSE@ @false

+

+.PHONY: dist-doc-header

+dist-doc-header: $(DOC_H_FILE)

+ @if test -f "$(DOC_H_FILE)"; then d=; else d="$(srcdir)/"; fi; \

+ echo "$(INSTALL_DATA) $${d}$(DOC_H_FILE) $(distdir)/$(DOC_H_FILE)"; \

+ $(INSTALL_DATA) "$${d}$(DOC_H_FILE)" "$(distdir)/$(DOC_H_FILE)";

+

+doc-dist-hook: dist-check-gdu $(if $(DOC_H_FILE),dist-doc-header)

+

+.PHONY: clean-doc-header

+clean-local: $(_clean_doc_header)

+distclean-local: $(_clean_doc_header)

+mostlyclean-local: $(_clean_doc_header)

+maintainer-clean-local: $(_clean_doc_header)

+clean-doc-header:

+ rm -f $(DOC_H_FILE)

+

+all: $(DOC_H_FILE)

+

+################################################################################

+

+DOC_MODULE ?=

+

+DOC_ID ?=

+

+DOC_PAGES ?=

+

+DOC_ENTITIES ?=

+

+DOC_INCLUDES ?=

+

+DOC_FIGURES ?=

+

+DOC_FORMATS ?= docbook

+

+DOC_LINGUAS ?=

+

+################################################################################

+

+_xml2po ?= `which xml2po`

+

+_db2html ?= `$(PKG_CONFIG) --variable db2html gnome-doc-utils`

+_db2omf ?= `$(PKG_CONFIG) --variable db2omf gnome-doc-utils`

+_malrng ?= `$(PKG_CONFIG) --variable malrng gnome-doc-utils`

+_chunks ?= `$(PKG_CONFIG) --variable xmldir gnome-doc-utils`/gnome/xslt/docbook/utils/chunks.xsl

+_credits ?= `$(PKG_CONFIG) --variable xmldir gnome-doc-utils`/gnome/xslt/docbook/utils/credits.xsl

+_ids ?= `$(PKG_CONFIG) --variable xmldir gnome-doc-utils`/gnome/xslt/docbook/utils/ids.xsl

+@ENABLE_SK_TRUE@_skpkgdatadir ?= `scrollkeeper-config --pkgdatadir`

+@ENABLE_SK_TRUE@_sklocalstatedir ?= `scrollkeeper-config --pkglocalstatedir`

+@ENABLE_SK_TRUE@_skcontentslist ?= $(_skpkgdatadir)/Templates/C/scrollkeeper_cl.xml

+

+$(_DOC_OMF_DB) : $(_DOC_OMF_IN)

+$(_DOC_OMF_DB) : $(DOC_MODULE)-%.omf : %/$(DOC_MODULE).xml

+ @test "x$(_ENABLE_SK)" != "xtrue" -o -f "$(_skcontentslist)" || { \

+ echo "The file '$(_skcontentslist)' does not exist." >&2; \

+ echo "Please check your ScrollKeeper installation." >&2; \

+ exit 1; }

+ xsltproc -o $@ $(call db2omf_args,$@,$<,'docbook') || { rm -f "$@"; exit 1; }

+

+$(_DOC_OMF_HTML) : $(_DOC_OMF_IN)

+$(_DOC_OMF_HTML) : $(DOC_MODULE)-html-%.omf : %/$(DOC_MODULE).xml

+@ENABLE_SK_TRUE@ @test "x$(_ENABLE_SK)" != "xtrue" -o -f "$(_skcontentslist)" || { \

+@ENABLE_SK_TRUE@ echo "The file '$(_skcontentslist)' does not exist" >&2; \

+@ENABLE_SK_TRUE@ echo "Please check your ScrollKeeper installation." >&2; \

+@ENABLE_SK_TRUE@ exit 1; }

+ xsltproc -o $@ $(call db2omf_args,$@,$<,'xhtml') || { rm -f "$@"; exit 1; }

+

+.PHONY: omf

+omf: $(_DOC_OMF_ALL)

+

+.PHONY: po

+po: $(_DOC_POFILES)

+

+.PHONY: mo

+mo: $(_DOC_MOFILES)

+

+$(_DOC_POFILES):

+ @if ! test -d $(dir $@); then \

+ echo "mkdir $(dir $@)"; \

+ mkdir "$(dir $@)"; \

+ fi

+ @if test ! -f $@ -a -f $(srcdir)/$@; then \

+ echo "cp $(srcdir)/$@ $@"; \

+ cp "$(srcdir)/$@" "$@"; \

+ fi;

+ @docs=; \

+ list='$(_DOC_C_DOCS_NOENT)'; for doc in $$list; do \

+ docs="$$docs $(_DOC_ABS_SRCDIR)/$$doc"; \

+ done; \

+ if ! test -f $@; then \

+ echo "(cd $(dir $@) && \

+ $(_xml2po) -m $(_xml2po_mode) -e $$docs > $(notdir $@).tmp && \

+ cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp)"; \

+ (cd $(dir $@) && \

+ $(_xml2po) -m $(_xml2po_mode) -e $$docs > $(notdir $@).tmp && \

+ cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp); \

+ else \

+ echo "(cd $(dir $@) && \

+ $(_xml2po) -m $(_xml2po_mode) -e -u $(notdir $@) $$docs)"; \

+ (cd $(dir $@) && \

+ $(_xml2po) -m $(_xml2po_mode) -e -u $(notdir $@) $$docs); \

+ fi

+

+$(_DOC_MOFILES): %.mo: %.po

+ @if ! test -d $(dir $@); then \

+ echo "mkdir $(dir $@)"; \

+ mkdir "$(dir $@)"; \

+ fi

+ msgfmt -o $@ $<

+

+# FIXME: fix the dependancy

+# FIXME: hook xml2po up

+$(_DOC_LC_DOCS) : $(_DOC_MOFILES)

+$(_DOC_LC_DOCS) : $(_DOC_C_DOCS)

+ if ! test -d $(dir $@); then mkdir $(dir $@); fi

+ if [ -f "C/$(notdir $@)" ]; then d="../"; else d="$(_DOC_ABS_SRCDIR)/"; fi; \

+ mo="$(dir $@)$(patsubst %/$(notdir $@),%,$@).mo"; \

+ if [ -f "$${mo}" ]; then mo="../$${mo}"; else mo="$(_DOC_ABS_SRCDIR)/$${mo}"; fi; \

+ (cd $(dir $@) && \

+ $(_xml2po) -m $(_xml2po_mode) -e -t "$${mo}" \

+ "$${d}C/$(notdir $@)" > $(notdir $@).tmp && \

+ cp $(notdir $@).tmp $(notdir $@) && rm -f $(notdir $@).tmp)

+.PHONY: pot

+pot: $(_DOC_POT)

+$(_DOC_POT): $(_DOC_C_DOCS_NOENT)

+ $(_xml2po) -m $(_xml2po_mode) -e -o $@ $^

+

+$(_DOC_HTML_TOPS): $(_DOC_C_DOCS) $(_DOC_LC_DOCS)

+ xsltproc -o $@ --xinclude --param db.chunk.chunk_top "false()" --stringparam db.chunk.basename "$(DOC_MODULE)" --stringparam db.chunk.extension ".xhtml" $(_db2html) $(patsubst %.xhtml,%.xml,$@)

+

+################################################################################

+

+all: \

+ $(_DOC_C_DOCS) $(_DOC_LC_DOCS) \

+ $(_DOC_OMF_ALL) $(_DOC_DSK_ALL) \

+ $(_DOC_HTML_ALL) $(_DOC_POFILES)

+

+################################################################################

+

+.PHONY: clean-doc-omf clean-doc-dsk clean-doc-lc clean-doc-dir

+

+clean-doc-omf: ; rm -f $(_DOC_OMF_DB) $(_DOC_OMF_HTML)

+clean-doc-dsk: ; rm -f $(_DOC_DSK_DB) $(_DOC_DSK_HTML)

+clean-doc-lc:

+ rm -f $(_DOC_LC_DOCS)

+ rm -f $(_DOC_MOFILES)

+ @list='$(_DOC_POFILES)'; for po in $$list; do \

+ if ! test "$$po" -ef "$(srcdir)/$$po"; then \

+ echo "rm -f $$po"; \

+ rm -f "$$po"; \

+ fi; \

+ done

+# .xml2.po.mo cleaning is obsolete as of 0.18.1 and could be removed in 0.20.x

+ @for lc in C $(_DOC_REAL_LINGUAS); do \

+ if test -f "$$lc/.xml2po.mo"; then \

+ echo "rm -f $$lc/.xml2po.mo"; \

+ rm -f "$$lc/.xml2po.mo"; \

+ fi; \

+ done

+clean-doc-dir: clean-doc-lc

+ @for lc in C $(_DOC_REAL_LINGUAS); do \

+ for dir in `find $$lc -depth -type d`; do \

+ if ! test $$dir -ef $(srcdir)/$$dir; then \

+ echo "rmdir $$dir"; \

+ rmdir "$$dir"; \

+ fi; \

+ done; \

+ done

+

+clean-local: \

+ $(_clean_omf) $(_clean_dsk) \

+ $(_clean_lc) $(_clean_dir)

+distclean-local: \

+ $(_clean_omf) $(_clean_dsk) \

+ $(_clean_lc) $(_clean_dir)

+mostlyclean-local: \

+ $(_clean_omf) $(_clean_dsk) \

+ $(_clean_lc) $(_clean_dir)

+maintainer-clean-local: \

+ $(_clean_omf) $(_clean_dsk) \

+ $(_clean_lc) $(_clean_dir)

+

+################################################################################

+

+.PHONY: dist-doc-docs dist-doc-pages dist-doc-figs dist-doc-omf dist-doc-dsk

+doc-dist-hook: \

+ $(if $(DOC_MODULE)$(DOC_ID),dist-doc-docs) \

+ $(if $(_DOC_C_FIGURES),dist-doc-figs) \

+ $(if $(_DOC_OMF_IN),dist-doc-omf)

+# $(if $(_DOC_DSK_IN),dist-doc-dsk)

+

+dist-doc-docs: $(_DOC_C_DOCS) $(_DOC_LC_DOCS) $(_DOC_POFILES)

+ @for lc in C $(_DOC_REAL_LINGUAS); do \

+ echo " $(mkinstalldirs) $(distdir)/$$lc"; \

+ $(mkinstalldirs) "$(distdir)/$$lc"; \

+ done

+ @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS) $(_DOC_POFILES)'; \

+ for doc in $$list; do \

+ if test -f "$$doc"; then d=; else d="$(srcdir)/"; fi; \

+ docdir=`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \

+ if ! test -d "$(distdir)/$$docdir"; then \

+ echo "$(mkinstalldirs) $(distdir)/$$docdir"; \

+ $(mkinstalldirs) "$(distdir)/$$docdir"; \

+ fi; \

+ echo "$(INSTALL_DATA) $$d$$doc $(distdir)/$$doc"; \

+ $(INSTALL_DATA) "$$d$$doc" "$(distdir)/$$doc"; \

+ done

+

+dist-doc-figs: $(_DOC_SRC_FIGURES)

+ @list='$(_DOC_C_FIGURES) $(_DOC_LC_FIGURES)'; \

+ for fig in $$list; do \

+ if test -f "$$fig"; then d=; else d="$(srcdir)/"; fi; \

+ if test -f "$$d$$fig"; then \

+ figdir=`echo $$fig | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \

+ if ! test -d "$(distdir)/$$figdir"; then \

+ echo "$(mkinstalldirs) $(distdir)/$$figdir"; \

+ $(mkinstalldirs) "$(distdir)/$$figdir"; \

+ fi; \

+ echo "$(INSTALL_DATA) $$d$$fig $(distdir)/$$fig"; \

+ $(INSTALL_DATA) "$$d$$fig" "$(distdir)/$$fig"; \

+ fi; \

+ done;

+

+dist-doc-omf:

+ @if test -f "$(_DOC_OMF_IN)"; then d=; else d="$(srcdir)/"; fi; \

+ echo "$(INSTALL_DATA) $$d$(_DOC_OMF_IN) $(distdir)/$(notdir $(_DOC_OMF_IN))"; \

+ $(INSTALL_DATA) "$$d$(_DOC_OMF_IN)" "$(distdir)/$(notdir $(_DOC_OMF_IN))"

+

+dist-doc-dsk:

+ @if test -f "$(_DOC_DSK_IN)"; then d=; else d="$(srcdir)/"; fi; \

+ echo "$(INSTALL_DATA) $$d$(_DOC_DSK_IN) $(distdir)/$(notdir $(_DOC_DSK_IN))"; \

+ $(INSTALL_DATA) "$$d$(_DOC_DSK_IN)" "$(distdir)/$(notdir $(_DOC_DSK_IN))"

+

+################################################################################

+

+.PHONY: check-doc-docs check-doc-omf

+check: \

+ $(if $(DOC_MODULE),check-doc-docs) \

+ $(if $(DOC_ID),check-doc-pages) \

+ $(if $(_DOC_OMF_IN),check-doc-omf)

+

+check-doc-docs: $(_DOC_C_DOCS) $(_DOC_LC_DOCS)

+ @for lc in C $(_DOC_REAL_LINGUAS); do \

+ if test -f "$$lc"; \

+ then d=; \

+ xmlpath="$$lc"; \

+ else \

+ d="$(srcdir)/"; \

+ xmlpath="$$lc:$(srcdir)/$$lc"; \

+ fi; \

+ echo "xmllint --noout --noent --path $$xmlpath --xinclude --postvalid $$d$$lc/$(DOC_MODULE).xml"; \

+ xmllint --noout --noent --path "$$xmlpath" --xinclude --postvalid "$$d$$lc/$(DOC_MODULE).xml"; \

+ done

+

+check-doc-pages: $(_DOC_C_PAGES) $(_DOC_LC_PAGES)

+ for lc in C $(_DOC_REAL_LINGUAS); do \

+ if test -f "$$lc"; \

+ then d=; \

+ xmlpath="$$lc"; \

+ else \

+ d="$(srcdir)/"; \

+ xmlpath="$$lc:$(srcdir)/$$lc"; \

+ fi; \

+ for page in $(DOC_PAGES); do \

+ echo "xmllint --noout --noent --path $$xmlpath --xinclude --relaxng $(_malrng) $$d$$lc/$$page"; \

+ xmllint --noout --noent --path "$$xmlpath" --xinclude --relaxng "$(_malrng)" "$$d$$lc/$$page"; \

+ done; \

+ done

+

+check-doc-omf: $(_DOC_OMF_ALL)

+ @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \

+ echo "xmllint --noout --xinclude --dtdvalid 'http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd' $$omf"; \

+ xmllint --noout --xinclude --dtdvalid 'http://scrollkeeper.sourceforge.net/dtds/scrollkeeper-omf-1.0/scrollkeeper-omf.dtd' $$omf; \

+ done

+

+################################################################################

+

+.PHONY: install-doc-docs install-doc-html install-doc-figs install-doc-omf install-doc-dsk

+

+install-data-local: \

+ $(if $(DOC_MODULE)$(DOC_ID),install-doc-docs) \

+ $(if $(_DOC_HTML_ALL),install-doc-html) \

+ $(if $(_DOC_C_FIGURES),install-doc-figs) \

+ $(if $(_DOC_OMF_IN),install-doc-omf)

+# $(if $(_DOC_DSK_IN),install-doc-dsk)

+

+install-doc-docs:

+ @for lc in C $(_DOC_REAL_LINGUAS); do \

+ echo "$(mkinstalldirs) $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$lc"; \

+ $(mkinstalldirs) $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$lc; \

+ done

+ @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS)'; for doc in $$list; do \

+ if test -f "$$doc"; then d=; else d="$(srcdir)/"; fi; \

+ docdir="$$lc/"`echo $$doc | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \

+ docdir="$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$docdir"; \

+ if ! test -d "$$docdir"; then \

+ echo "$(mkinstalldirs) $$docdir"; \

+ $(mkinstalldirs) "$$docdir"; \

+ fi; \

+ echo "$(INSTALL_DATA) $$d$$doc $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc"; \

+ $(INSTALL_DATA) $$d$$doc $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc; \

+ done

+

+install-doc-figs:

+ @list='$(patsubst C/%,%,$(_DOC_C_FIGURES))'; for fig in $$list; do \

+ for lc in C $(_DOC_REAL_LINGUAS); do \

+ figsymlink=false; \

+ if test -f "$$lc/$$fig"; then \

+ figfile="$$lc/$$fig"; \

+ elif test -f "$(srcdir)/$$lc/$$fig"; then \

+ figfile="$(srcdir)/$$lc/$$fig"; \

+ else \

+ figsymlink=true; \

+ fi; \

+ figdir="$$lc/"`echo $$fig | sed -e 's/^\(.*\/\).*/\1/' -e '/\//!s/.*//'`; \

+ figdir="$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$figdir"; \

+ if ! test -d "$$figdir"; then \

+ echo "$(mkinstalldirs) $$figdir"; \

+ $(mkinstalldirs) "$$figdir"; \

+ fi; \

+ figbase=`echo $$fig | sed -e 's/^.*\///'`; \

+ if $$figsymlink; then \

+ echo "cd $$figdir && $(LN_S) -f ../../C/$$fig $$figbase"; \

+ ( cd "$$figdir" && $(LN_S) -f "../../C/$$fig" "$$figbase" ); \

+ else \

+ echo "$(INSTALL_DATA) $$figfile $$figdir$$figbase"; \

+ $(INSTALL_DATA) "$$figfile" "$$figdir$$figbase"; \

+ fi; \

+ done; \

+ done

+

+install-doc-html:

+ echo install-html

+

+install-doc-omf:

+ $(mkinstalldirs) $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)

+ @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \

+ echo "$(INSTALL_DATA) $$omf $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \

+ $(INSTALL_DATA) $$omf $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf; \

+ done

+ @if test "x$(_ENABLE_SK)" = "xtrue"; then \

+ echo "scrollkeeper-update -p $(DESTDIR)$(_sklocalstatedir) -o $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)"; \

+ scrollkeeper-update -p "$(DESTDIR)$(_sklocalstatedir)" -o "$(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)"; \

+ fi;

+

+install-doc-dsk:

+ echo install-dsk

+

+################################################################################

+

+.PHONY: uninstall-doc-docs uninstall-doc-html uninstall-doc-figs uninstall-doc-omf uninstall-doc-dsk

+uninstall-local: \

+ $(if $(DOC_MODULE)$(DOC_ID),uninstall-doc-docs) \

+ $(if $(_DOC_HTML_ALL),uninstall-doc-html) \

+ $(if $(_DOC_C_FIGURES),uninstall-doc-figs) \

+ $(if $(_DOC_OMF_IN),uninstall-doc-omf)

+# $(if $(_DOC_DSK_IN),uninstall-doc-dsk)

+

+uninstall-doc-docs:

+ @list='$(_DOC_C_DOCS) $(_DOC_LC_DOCS)'; for doc in $$list; do \

+ echo " rm -f $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc"; \

+ rm -f "$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$doc"; \

+ done

+

+uninstall-doc-figs:

+ @list='$(_DOC_C_FIGURES) $(_DOC_LC_FIGURES)'; for fig in $$list; do \

+ echo "rm -f $(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$fig"; \

+ rm -f "$(DESTDIR)$(HELP_DIR)/$(_doc_install_dir)/$$fig"; \

+ done;

+

+uninstall-doc-omf:

+ @list='$(_DOC_OMF_ALL)'; for omf in $$list; do \

+ if test "x$(_ENABLE_SK)" = "xtrue"; then \

+ echo "scrollkeeper-uninstall -p $(_sklocalstatedir) $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \

+ scrollkeeper-uninstall -p "$(_sklocalstatedir)" "$(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \

+ fi; \

+ echo "rm -f $(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \

+ rm -f "$(DESTDIR)$(OMF_DIR)/$(_doc_install_dir)/$$omf"; \

+ done

+dist-hook: doc-dist-hook

+

+# Tell versions [3.59,3.63) of GNU make to not export all variables.

+# Otherwise a system limit (for SysV at least) may be exceeded.

+.NOEXPORT:

+<?xml version="1.0" standalone="no"?>

+<omf>

+ <resource>

+ <subject category="GNOME|Applets|Utility"/>

+ <type>manual</type>

+ <relation seriesid="d0f17f50-5028-11da-907c-e37d0364f41a"/>

+ <rights type="GNU FDL" license.version="1.1" holder="Alex Murray"/>

+ </resource>

+</omf>

+