diff options
Diffstat (limited to 'help/C')
| -rw-r--r-- | help/C/figures/applet_in_panel.png | bin | 0 -> 4130 bytes | |||
| -rw-r--r-- | help/C/legal.xml | 76 | ||||
| -rw-r--r-- | help/C/sensors-applet.xml | 733 |
3 files changed, 809 insertions, 0 deletions
diff --git a/help/C/figures/applet_in_panel.png b/help/C/figures/applet_in_panel.png Binary files differnew file mode 100644 index 0000000..dfbac38 --- /dev/null +++ b/help/C/figures/applet_in_panel.png diff --git a/help/C/legal.xml b/help/C/legal.xml new file mode 100644 index 0000000..ac97e1d --- /dev/null +++ b/help/C/legal.xml @@ -0,0 +1,76 @@ + <legalnotice id="legalnotice"> + <para> + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU Free Documentation + License (GFDL), Version 1.1 or any later version published + by the Free Software Foundation with no Invariant Sections, + no Front-Cover Texts, and no Back-Cover Texts. You can find + a copy of the GFDL at this <ulink type="help" + url="ghelp:fdl">link</ulink> or in the file COPYING-DOCS + distributed with this manual. + </para> + <para> This manual is part of a collection of GNOME manuals + distributed under the GFDL. If you want to distribute this + manual separately from the collection, you can do so by + adding a copy of the license to the manual, as described in + section 6 of the license. + </para> + + <para> + Many of the names used by companies to distinguish their + products and services are claimed as trademarks. Where those + names appear in any GNOME documentation, and the members of + the GNOME Documentation Project are made aware of those + trademarks, then the names are in capital letters or initial + capital letters. + </para> + + <para> + DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT ARE PROVIDED + UNDER THE TERMS OF THE GNU FREE DOCUMENTATION LICENSE + WITH THE FURTHER UNDERSTANDING THAT: + + <orderedlist> + <listitem> + <para>DOCUMENT IS PROVIDED ON AN "AS IS" BASIS, + WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR + IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES + THAT THE DOCUMENT OR MODIFIED VERSION OF THE + DOCUMENT IS FREE OF DEFECTS MERCHANTABLE, FIT FOR + A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE + RISK AS TO THE QUALITY, ACCURACY, AND PERFORMANCE + OF THE DOCUMENT OR MODIFIED VERSION OF THE + DOCUMENT IS WITH YOU. SHOULD ANY DOCUMENT OR + MODIFIED VERSION PROVE DEFECTIVE IN ANY RESPECT, + YOU (NOT THE INITIAL WRITER, AUTHOR OR ANY + CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY + SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER + OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS + LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED + VERSION OF THE DOCUMENT IS AUTHORIZED HEREUNDER + EXCEPT UNDER THIS DISCLAIMER; AND + </para> + </listitem> + <listitem> + <para>UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL + THEORY, WHETHER IN TORT (INCLUDING NEGLIGENCE), + CONTRACT, OR OTHERWISE, SHALL THE AUTHOR, + INITIAL WRITER, ANY CONTRIBUTOR, OR ANY + DISTRIBUTOR OF THE DOCUMENT OR MODIFIED VERSION + OF THE DOCUMENT, OR ANY SUPPLIER OF ANY OF SUCH + PARTIES, BE LIABLE TO ANY PERSON FOR ANY + DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR + CONSEQUENTIAL DAMAGES OF ANY CHARACTER + INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS + OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR + MALFUNCTION, OR ANY AND ALL OTHER DAMAGES OR + LOSSES ARISING OUT OF OR RELATING TO USE OF THE + DOCUMENT AND MODIFIED VERSIONS OF THE DOCUMENT, + EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF + THE POSSIBILITY OF SUCH DAMAGES. + </para> + </listitem> + </orderedlist> + </para> + </legalnotice> + diff --git a/help/C/sensors-applet.xml b/help/C/sensors-applet.xml new file mode 100644 index 0000000..6aaae92 --- /dev/null +++ b/help/C/sensors-applet.xml @@ -0,0 +1,733 @@ +<?xml version="1.0"?> +<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" +"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" [ + <!ENTITY legal SYSTEM "legal.xml"> + <!ENTITY appletversion "1.6"> + <!ENTITY manrevision "2.0"> + <!ENTITY date "January 2006"> + <!ENTITY applet "GNOME Sensors Applet"> + <!ENTITY author-name "Alex Murray"> + <!ENTITY author-email "[email protected]"> + <!ENTITY project-webpage "http://sensors-applet.sourceforge.net/"> + <!-- Information about the entities. + The legal.xml file contains legal information, there is no need to edit the file. + Use the appletversion entity to specify the version of the applet. + Use the manrevision entity to specify the revision number of this manual. + Use the date entity to specify the release date of this manual. + Use the applet entity to specify the name of the applet. --> + +]> +<!-- + (Do not remove this comment block.) + Maintained by the GNOME Documentation Project + http://developer.gnome.org/projects/gdp + Template version: 2.0 beta + Template last modified Feb 06, 2003 +--> +<!-- =============Document Header ============================= --> +<article id="index" lang="en"> + <!-- please do not change the id; for translations, change lang to --> + <!-- appropriate code --> + <articleinfo> + <title>&applet; Manual V&manrevision;</title> + <copyright> + <year>2006</year> + <holder>&author-name;</holder> + </copyright> + <abstract role="description"> + <para>&applet; displays readings from temperature, voltage and + fan sensors within the panel.</para> + </abstract> + + <!-- translators: uncomment this: + + <copyright> + <year>2002</year> + <holder>ME-THE-TRANSLATOR (Latin translation)</holder> + </copyright> + + --> + <!-- An address can be added to the publisher information. If a role is + not specified, the publisher/author is the same for all versions of the + document. + <publisher> + <publishername> GNOME Documentation Project </publishername> + </publisher> + --> + &legal; + <!-- This file contains link to license for the documentation (GNU FDL), and + other legal stuff such as "NO WARRANTY" statement. Please do not change + any of this. --> + + <authorgroup> + <author role="maintainer"> + <firstname>Alex</firstname> + <surname>Murray</surname> + <affiliation> + <!-- <orgname>GNOME Documentation + Project</orgname> --> + <!-- The email address of the author is optional and is commented out by default. + <address> <email>[email protected]</email> </address> + --> + </affiliation> + </author> + <!-- This is appropriate place for other contributors: translators, + maintainers, etc. Commented out by default. + <othercredit role="translator"> + <firstname>Latin</firstname> + <surname>Translator 1</surname> + <affiliation> + <orgname>Latin Translation Team</orgname> + <address> <email>[email protected]</email> </address> + </affiliation> + <contrib>Latin translation</contrib> + </othercredit> + --> + </authorgroup> + <!-- According to GNU FDL, revision history is mandatory if you are --> + <!-- modifying/reusing someone else's document. If not, you can omit it. --> + <!-- Remember to remove the &manrevision; entity from the revision entries other + --> + <!-- than the current revision. --> + <!-- The revision numbering system for GNOME manuals is as follows: --> + <!-- * the revision number consists of two components --> + <!-- * the first component of the revision number reflects the release version of the GNOME desktop. --> + <!-- * the second component of the revision number is a decimal unit that is incremented with each revision of the manual. --> + <!-- For example, if the GNOME desktop release is V2.x, the first version of the manual that --> + <!-- is written in that desktop timeframe is V2.0, the second version of the manual is V2.1, etc. --> + <!-- When the desktop release version changes to V3.x, the revision number of the manual changes --> + <!-- to V3.0, and so on. --> + <revhistory> + <revision> + <revnumber>&applet; Manual V&manrevision;</revnumber> + <date>&date;</date> + <revdescription> + <para role="author">&author-name; + + <email>&author-email;</email> + </para> + <!-- <para role="publisher">GNOME Documentation Project</para> --> + </revdescription> + </revision> + </revhistory> + <releaseinfo> This manual describes version &appletversion; of &applet;. + </releaseinfo> + <legalnotice> + <title>Feedback</title> + <para> To report a bug or make a suggestion regarding &applet; or this + manual, follow the directions at the + <ulink url="&project-webpage;" + type="http">&applet; Project Homepage</ulink>. </para> + + </legalnotice> + </articleinfo> + <indexterm zone="index"> + <primary>&applet;</primary> + </indexterm> + <!-- ============= Document Body ============================= --> + <!-- ============= Introduction ============================== --> + <sect1 id="sensors-applet-introduction"> + <title>Introduction</title> + <!-- ==== Figure ============================================= --> + <figure id="sensors-applet-fig"> + <title>&applet;</title> + <screenshot> + <mediaobject> + <imageobject> + <imagedata fileref="figures/applet_in_panel.png" format="PNG"/> + </imageobject> + <textobject> + <phrase>&applet; with 3 sensors enabled.</phrase> + </textobject> + </mediaobject> + </screenshot> + </figure> + <!-- ==== End of Figure ======================================= --> + <para> + <application>&applet;</application> provides a convenient way to + monitor the health of your computer in a simple display on your + desktop. + </para> + <para>A number of sensor interfaces are supported, which should be + configured before adding &applet; to the panel: + <itemizedlist> + <listitem> + <para>ACPI thermal zones, via the Linux kernel ACPI modules</para> + </listitem> + <listitem> + <!-- i2c modules --> + <para>Linux kernel i2c modules</para> + <itemizedlist> + <listitem> + <para>Via the sysfs filesystem and <ulink + url="http://secure.netroedge.com/~lm78/kernel26.html" + type="http">i2c</ulink> modules distributed directly + with the kernel (kernel 2.6)</para> + </listitem> + <listitem> + <para>Via the proc filesystem and i2c modules from the + <ulink + url="http://secure.netroedge.com/~lm78/kernel26.html" + type="http">lm_sensors and i2c</ulink> packages (kernel 2.4)</para> + </listitem> + <listitem> + <para>Via the libsensors library provided with the + <ulink + url="http://secure.netroedge.com/~lm78/kernel26.html" + type="http">lm_sensors</ulink> package + </para> + </listitem> + </itemizedlist> + </listitem> + <!-- i8k module --> + <listitem> + <para>Linux kernel <ulink + url="http://people.debian.org/~dz/i8k/00-README" + type="http">i8k</ulink> module (for Dell Inspiron Laptops).</para> + </listitem> + <!-- ibm-acpi module --> + <listitem> + <para>Linux kernel <ulink + url="http://ibm-acpi.sourceforge.net/" + type="http">ibm-acpi</ulink> module (for IBM Laptops).</para> + </listitem> + <!-- therm_adt746x and therm_windtunnel --> + <listitem> + <para>Linux kernel PowerPC modules therm_adt746x and therm_windtunnel.</para> + </listitem> + <!-- iMac G5 Windfarm --> + <listitem> + <para>Linux kernel iMac G5 Windfarm module.</para> + </listitem> + <!-- hddtemp --> + <listitem> + <para><ulink url="http://www.guzu.net/linux/hddtemp.php" + type="http">hddtemp</ulink> daemon for reading temperatures + from S.M.A.R.T. equipped disks.</para> + </listitem> + <!-- Omnibook --> + <listitem> + <para>Linux kernel <ulink + url="http://sourceforge.net/projects/omke">Omnibook</ulink> + module. (for HP and Toshiba Satellite Laptops)</para> + </listitem> + <!-- NVCtrl --> + <listitem> + <para>NVIDIA graphics cards via libNVCtrl (provided with + <ulink + url="ftp://download.nvidia.com/XFree86/nvidia-settings/"> + nvidia-settings</ulink> + ). + </para> + </listitem> + </itemizedlist> + </para> + <para>To add <application>&applet;</application> to a panel right-click on the panel to open the + panel pop-up menu, then choose + <menuchoice> + <guimenu>Add to Panel</guimenu> + <guimenuitem>Hardware Sensors Monitor</guimenuitem> + </menuchoice>.</para> + </sect1> + <!-- ================ Usage ================================ --> + <!-- Use this section to describe how to use the applet to perform the tasks for + which the applet is designed. --> + <sect1 id="sensors-applet-usage"> + <title>Usage</title> + <para>When you add <application>&applet;</application> to a panel for the + first time, the applet will search for any available sensors to monitor, and will display a sensible default sensor if found (such as the temperature of the CPU). + </para> + <para>Most users will then want to customize the display to their + liking, which can be done via the + <menuchoice> + <guimenuitem>Preferences</guimenuitem> + </menuchoice> menu item + (see <xref linkend="sensors-applet-preferences" />). + </para> + </sect1> + <!-- ============= Preferences ============================= --> + <!-- Use this section to describe how to customize the applet. --> + <sect1 id="sensors-applet-preferences"> + <title>Preferences</title> + <para>To configure <application>&applet;</application>, + right-click on the applet, then choose + <menuchoice><guimenuitem>Preferences</guimenuitem></menuchoice> + from the pop-up menu.</para> + <para>The + <menuchoice><guimenuitem>Preferences</guimenuitem></menuchoice> + window contains the following tabbed sections: </para> + <itemizedlist> + <listitem> + <para> + <xref linkend="sensors-applet-general-options"/> + </para> + </listitem> + <listitem> + <para> + <xref linkend="sensors-applet-sensors"/> + </para> + </listitem> + </itemizedlist> + </sect1> + <!-- =============== Customization Subsection ================ --> + <!-- Use a new section to describe different tabbed sections on the Settings or Preferences + dialog. --> + <sect1 id="sensors-applet-general-options"> + <title>General Options</title> + <variablelist> + <varlistentry> + <term> + <guilabel>Display sensors in panel as</guilabel> + </term> + <listitem> + <para>This option selects whether to display sensors in + the panel with either their label or icon and their value, + or to have no identifier for each sensor and just display their + values, or simply to display the icon for each sensor. A graph can + also be displayed for each sensor, showing the progression of the + sensor value over time.</para> + <para>Default: icon with value.</para> + </listitem> + </varlistentry> + <varlistentry> + <term> + <guilabel>Preferred position of sensor values</guilabel> + </term> + <listitem> + <para>Sensors can be display with either their value + beside their icon / label, or with the value shown below the icon + / label. </para> + <para>Default: beside labels / icons.</para> + + <note> + <para>If there is not enough room in the panel to use the + requested position, the best position to ensure all sensor + elements are visible will be used instead.</para> + </note> + </listitem> + </varlistentry> + <varlistentry> + <term> + <guilabel>Graph size (pixels)</guilabel> + </term> + <listitem> + <para>When displaying sensors as graphs, the size of the + graph sets either the width of the graph (when displayed on + either the top or bottom panel) or the height of the graph (when + displayed on the left or right panel).</para> + <para>Default: 42 pixels.</para> + </listitem> + </varlistentry> + <varlistentry> + <term> + <guilabel>Temperature scale</guilabel> + </term> + <listitem> + <para>Which scale to use for temperature sensors (Kelvin, + Fahrenheit or Celsius are supported).</para> + <para>Default: Celsius.</para> + </listitem> + </varlistentry> + <varlistentry> + <term> + <guilabel>Update interval</guilabel> + </term> + <listitem> + <para>How often to update the values of each sensor shown + within the panel.</para> + <para>Default: 2 seconds.</para> + </listitem> + </varlistentry> + <varlistentry> + <term> + <guilabel>Display notifications</guilabel> + </term> + <listitem> + <para>If enabled, &applet; will display notifications to + the user when alarm conditions occur.</para> + <para>Default: Enabled.</para> + <note> + <para> +Alarms for individual sensors must also be enabled. + </para> + </note> + </listitem> + </varlistentry> + </variablelist> + </sect1> + <!-- ============= Customization Subsection ===================== --> + <!-- Another tabbed section on the Preferences dialog. --> + <sect1 id="sensors-applet-sensors"> + <title>Sensors</title> + <para>The Sensors tab within the preferences window provides the + options for configuring each individual sensor. Each sensor is + listed under its specific interface, along with: + <itemizedlist> + <listitem> + <para>A fixed ID to identify the sensor within its + interface.</para> + </listitem> + <listitem> + <para>A user selectable icon to identify the sensor within + the panel.</para> + </listitem> + + <listitem> + <para>A user editable label to identify the sensor within + the panel.</para> + </listitem> + + <listitem> + <para>A check-box to allow the user to enable / disable + monitoring and display of the sensor within the + panel.</para> + </listitem> + + </itemizedlist> + The <guibutton>Properties</guibutton> button allows a + specific sensor to be more finely configured, providing a + separate window box for this purpose. (see <xref + linkend="sensors-applet-sensor-config-dialog" />) + </para> + <sect2 id="sensors-applet-sensor-config-dialog"> + <title>Sensor Properties</title> + + <para>Each sensor can be configured with a number of options, + including the possibility to scale the sensor value, and to + execute an alarm if a certain low or high value is + reached. The sensor icon can also be selected if + required. The high and low values are used to scale the + graph display, as well as set the color for the thermometer + displayed within the icons of temperature sensors.</para> + + <para>The sensor value can be scaled in a linear + fashion by allowing the user to specify a multiplier + and offset for each sensor. As each sensor value is + read, it is first multiplied by the 'multiplier' and + summed with the 'offset' to produce the final + value.</para> + + <variablelist> + <varlistentry> + <term> + <guilabel>Sensor value multiplier</guilabel> + </term> + <listitem> + <para>This option allows the user to specify the + multiplier of the sensor value.</para> + <para>Default: 1.0</para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <guilabel>Sensor value offset</guilabel> + </term> + <listitem> + <para>This option allows the user to specify the offset + for the sensor value.</para> + <para>Default: 0.0</para> + </listitem> + </varlistentry> + <varlistentry> + <term> + <guilabel>Sensor low value</guilabel> + </term> + <listitem> + <para>The value at which to trigger an alarm if the + sensor drops below this value. This value is also used to + scale the display of the graph and temperature icons.</para> + <para>Default: dependent on sensor type</para> + </listitem> + </varlistentry> + <varlistentry> + <term> + <guilabel>Sensor high value</guilabel> + </term> + <listitem> + <para>The value at which to trigger an alarm if the + sensor rises above this value. This value is also used to + scale the display of the graph and temperature icons.</para> + <para>Default: dependent on sensor type</para> + </listitem> + </varlistentry> + <varlistentry> + <term> + <guilabel>Enable alarm</guilabel> + </term> + <listitem> + <para>This option allows the user to enable alarm + monitoring for this sensor. When the sensor value rises + above, or drops below it's high or low values, the alarm + condition will occur. This will display a notification + to the user (if enabled), and execute the appropriate + Alarm Command every Alarm repeat interval + seconds.</para> + <para>Default: disabled</para> + <note> + <para> + Alarms will only execute for active sensors + </para> + </note> + </listitem> + </varlistentry> + <varlistentry> + <term> + <guilabel>Alarm repeat interval (secs)</guilabel> + </term> + <listitem> + <para> + How often to execute the alarm command while the alarm + condition is met. A value of 0 specifies to execute the + alarm once only when the alarm condition occurs. + </para> + <para>Default: 0 seconds</para> + <note> + <para> + If notifications are also enabled, a notification will + be displayed each time the alarm is executed as well + to notify the user that the alarm condition has + occurred. + </para> + </note> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <guilabel>High alarm command</guilabel> + </term> + <listitem> + <para>The command to be executed at each repeat interval + when the sensor value is equal to or above the upper limit. + </para> + <para>Default: none</para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <guilabel>Low alarm command</guilabel> + </term> + <listitem> + <para>The command to be executed at each repeat interval + when the sensor value is equal to or below the lower limit. + </para> + <para>Default: none</para> + <tip> + <variablelist> + <varlistentry> + <term> + <guilabel>Play a sound when the alarm occurs</guilabel> + </term> + <listitem> + <para>You can play a sound when the alarm occurs + by using the command + <command>esdplay</command> which should be + available as part of the standard GNOME + installation. (Note: If this does not work, + you could also try <command>aplay</command> + which is the default ALSA sound player). + + <!-- Make sure there is no extra whitespace + around these commands as it is a verbose + environment - preserves whitespace and + carriage returns etc --> + + <screen><userinput><command>esdplay /usr/share/sounds/gnibbles/gobble.wav</command></userinput></screen> + + </para> + </listitem> + </varlistentry> + <varlistentry> + <term> + <guilabel>Pop-up a window to notify that the + alarm has occurred</guilabel> + </term> + <listitem> + <para> + The program <command>zenity</command> can be used to create + dialog boxes to be displayed on the users current + display, and can thus be used to create pop-up + style notifications that the alarm has + occurred. + + <screen><userinput><command>zenity --warning --title="Sensor Alarm" --text="Sensor Alarm occurred"</command></userinput></screen> + + For more information regarding Zenity please + consult the Zenity <ulink type="help" + url="ghelp:zenity">documentation</ulink>. + </para> + </listitem> + </varlistentry> + <varlistentry> + <term> + <guilabel> + Combine multiple commands into one alarm command + </guilabel> + </term> + <listitem> + <para> + Multiple commands can be executed one after the + other using the "&&" construct to separate + them. To play a sound and pop-up a dialog via + Zenity the follow command can be used: + + <screen><userinput><command>esdplay /usr/share/sounds/gnibbles/gobble.wav && zenity --warning --title="Sensor Alarm" --text="Sensor Alarm occurred"</command></userinput></screen> + + </para> + </listitem> + </varlistentry> + </variablelist> + </tip> + </listitem> + </varlistentry> + <varlistentry> + <term> + <guilabel>Sensor icon</guilabel> + </term> + <listitem> + <para>Provides a list of available icons to allow the + user to select one to represent this sensor.</para> + </listitem> + </varlistentry> + <varlistentry> + <term> + <guilabel>Graph color</guilabel> + </term> + <listitem> + <para>The color to use to display the graph for the + sensor.</para> + <note> + <para>To accurately display graphs both the high + and low values for the sensor need to be set correctly. + </para> + </note> + </listitem> + </varlistentry> + </variablelist> + + </sect2> + </sect1> + <sect1> + <title>Advanced Options</title> + <para>There are a number of advanced options which can be set to + customize the display of sensors within the panel, which are set + using the GConf system.</para> + <variablelist> + <varlistentry> + <term><guilabel>Font Size</guilabel></term> + <listitem> + <para>The font size for labels and values is normally + derived from the standard Application Font size of the GNOME + Desktop, however this can be overridden. This is done by + setting the value of the parameter + + <emphasis>/apps/sensors-applet/font-size</emphasis> + + within the user's GConf database. This can be achieved by + the following command, where the font size is specified as + the last parameter, and in this case is set to + <emphasis>10</emphasis>: + + <!-- CAN"T HAVE ANY LINE BREAKS IN COMMAND --> + <screen><userinput><command>gconftool-2 -s /apps/sensors-applet/font-size -t int 10</command></userinput></screen> + </para> + + <note> + <para>To reset the value so that the default font size is + not overridden, a font size of <emphasis>0</emphasis> + should be set. + </para> + </note> + + </listitem> + </varlistentry> + <varlistentry> + <term><guilabel>Hide Units</guilabel></term> + <listitem> + <para>The units for sensor values can also be hidden if + desired by setting the boolean value + + <emphasis>/apps/sensors-applet/hide-units</emphasis> + + within the user's GConf database. This can be achieved by + the following command, where the value is specified as + either <emphasis>true</emphasis> or + <emphasis>false</emphasis> and is specified as the last + parameter. In this case is the units will be hidden (the + value is set to <emphasis>true</emphasis>): + <!-- CAN"T HAVE ANY LINE BREAKS IN COMMAND --> + <screen><userinput><command>gconftool-2 -s /apps/sensors-applet/hide-units -t bool true</command></userinput></screen> + </para> + </listitem> + </varlistentry> + </variablelist> + <note> + <para>These values can also be set using the <ulink type="help" + url="ghelp:gconf-editor">Configuration Editor</ulink> + application. + </para> + </note> + </sect1> + <!-- ============= Bugs ================================== --> + <!-- This section is optional and is commented out by default. + You can use it to describe known bugs and limitations of the + program if there are any - please be frank and list all + problems you know of. + + <sect1 id="myapplet-bugs"> + <title>Known Bugs and Limitations</title> + <para> </para> + </sect1> + --> + <!-- ============= About ================================== --> + <!-- This section contains info about the program (not docs), such as + author's name(s), web page, license, feedback address. This + section is optional: primary place for this info is "About.." box of + the program. However, if you do wish to include this info in the + manual, this is the place to put it. Alternatively, you can put this + information in the title page.--> + + <sect1 id="myapplet-about"> + <title>About &applet;</title> + <para> + <application>&applet;</application> was written by Alex Murray + (<email>[email protected]</email>). To find more information about + <application>&applet;</application>, please visit the <ulink + url="&project-webpage;" type="http">&applet; Project + Homepage</ulink>. + </para> + <para> To report a bug or make a suggestion regarding &applet; or this + manual, follow the directions at the + <ulink url="&project-webpage;" + type="http">project homepage</ulink>. </para> + + <!-- For translations: uncomment this: + + <para> + Latin translation was done by ME + (<email>MYNAME@MYADDRESS</email>). Please send all comments and + suggestions regarding this translation to SOMEWHERE. + </para> + + --> + + <para> + This program is distributed under the terms of the GNU General + Public license as published by the Free Software Foundation; + either version 2 of the License, or (at your option) any later + version. A copy of this license can be found at this <ulink + type="help" url="ghelp:gpl">link</ulink>, or in the file COPYING + included with the source code of this program. + </para> + </sect1> + +</article> +<!-- OVERRIDE DICTIONARY SETTING SO THAT USE AMERICAN ENGLISH STYLE - --> +<!-- FROM GNOME HIG --> +<!-- Local IspellDict: english --> +<!-- LocalWords: hddtemp filesystem proc lm README Inspiron windtunnel --> +<!-- LocalWords: ibm ACPI sysfs PowerPC adt Omnibook NVIDIA --> +<!-- LocalWords: libNVCtrl libsensors nvidia esdplay aplay ALSA zenity --> +<!-- LocalWords: acpi iMac Windfarm nvidia gconftool GConf bool --> |
