-Installation Instructions

-*************************

-

-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,

-2006, 2007, 2008, 2009 Free Software Foundation, Inc.

-

- This file is free documentation; the Free Software Foundation gives

-unlimited permission to copy, distribute and modify it.

-

-Basic Installation

-==================

-

- Briefly, the shell commands `./configure; make; make install' should

-configure, build, and install this package. The following

-more-detailed instructions are generic; see the `README' file for

-instructions specific to this package.

-

- The `configure' shell script attempts to guess correct values for

-various system-dependent variables used during compilation. It uses

-those values to create a `Makefile' in each directory of the package.

-It may also create one or more `.h' files containing system-dependent

-definitions. Finally, it creates a shell script `config.status' that

-you can run in the future to recreate the current configuration, and a

-file `config.log' containing compiler output (useful mainly for

-debugging `configure').

-

- It can also use an optional file (typically called `config.cache'

-and enabled with `--cache-file=config.cache' or simply `-C') that saves

-the results of its tests to speed up reconfiguring. Caching is

-disabled by default to prevent problems with accidental use of stale

-cache files.

-

- If you need to do unusual things to compile the package, please try

-to figure out how `configure' could check whether to do them, and mail

-diffs or instructions to the address given in the `README' so they can

-be considered for the next release. If you are using the cache, and at

-some point `config.cache' contains results you don't want to keep, you

-may remove or edit it.

-

- The file `configure.ac' (or `configure.in') is used to create

-`configure' by a program called `autoconf'. You need `configure.ac' if

-you want to change it or regenerate `configure' using a newer version

-of `autoconf'.

-

-The simplest way to compile this package is:

-

- 1. `cd' to the directory containing the package's source code and type

- `./configure' to configure the package for your system.

-

- Running `configure' might take a while. While running, it prints

- some messages telling which features it is checking for.

-

- 2. Type `make' to compile the package.

-

- 3. Optionally, type `make check' to run any self-tests that come with

- the package.

-

- 4. Type `make install' to install the programs and any data files and

- documentation.

-

- 5. You can remove the program binaries and object files from the

- source code directory by typing `make clean'. To also remove the

- files that `configure' created (so you can compile the package for

- a different kind of computer), type `make distclean'. There is

- also a `make maintainer-clean' target, but that is intended mainly

- for the package's developers. If you use it, you may have to get

- all sorts of other programs in order to regenerate files that came

- with the distribution.

-

- 6. Often, you can also type `make uninstall' to remove the installed

- files again.

-

-Compilers and Options

-=====================

-

- Some systems require unusual options for compilation or linking that

-the `configure' script does not know about. Run `./configure --help'

-for details on some of the pertinent environment variables.

-

- You can give `configure' initial values for configuration parameters

-by setting variables in the command line or in the environment. Here

-is an example:

-

- ./configure CC=c99 CFLAGS=-g LIBS=-lposix

-

- *Note Defining Variables::, for more details.

-

-Compiling For Multiple Architectures

-====================================

-

- You can compile the package for more than one kind of computer at the

-same time, by placing the object files for each architecture in their

-own directory. To do this, you can use GNU `make'. `cd' to the

-directory where you want the object files and executables to go and run

-the `configure' script. `configure' automatically checks for the

-source code in the directory that `configure' is in and in `..'.

-

- With a non-GNU `make', it is safer to compile the package for one

-architecture at a time in the source code directory. After you have

-installed the package for one architecture, use `make distclean' before

-reconfiguring for another architecture.

-

- On MacOS X 10.5 and later systems, you can create libraries and

-executables that work on multiple system types--known as "fat" or

-"universal" binaries--by specifying multiple `-arch' options to the

-compiler but only a single `-arch' option to the preprocessor. Like

-this:

-

- ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \

- CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \

- CPP="gcc -E" CXXCPP="g++ -E"

-

- This is not guaranteed to produce working output in all cases, you

-may have to build one architecture at a time and combine the results

-using the `lipo' tool if you have problems.

-

-Installation Names

-==================

-

- By default, `make install' installs the package's commands under

-`/usr/local/bin', include files under `/usr/local/include', etc. You

-can specify an installation prefix other than `/usr/local' by giving

-`configure' the option `--prefix=PREFIX'.

-

- You can specify separate installation prefixes for

-architecture-specific files and architecture-independent files. If you

-pass the option `--exec-prefix=PREFIX' to `configure', the package uses

-PREFIX as the prefix for installing programs and libraries.

-Documentation and other data files still use the regular prefix.

-

- In addition, if you use an unusual directory layout you can give

-options like `--bindir=DIR' to specify different values for particular

-kinds of files. Run `configure --help' for a list of the directories

-you can set and what kinds of files go in them.

-

- If the package supports it, you can cause programs to be installed

-with an extra prefix or suffix on their names by giving `configure' the

-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.

-

-Optional Features

-=================

-

- Some packages pay attention to `--enable-FEATURE' options to

-`configure', where FEATURE indicates an optional part of the package.

-They may also pay attention to `--with-PACKAGE' options, where PACKAGE

-is something like `gnu-as' or `x' (for the X Window System). The

-`README' should mention any `--enable-' and `--with-' options that the

-package recognizes.

-

- For packages that use the X Window System, `configure' can usually

-find the X include and library files automatically, but if it doesn't,

-you can use the `configure' options `--x-includes=DIR' and

-`--x-libraries=DIR' to specify their locations.

-

-Particular systems

-==================

-

- On HP-UX, the default C compiler is not ANSI C compatible. If GNU

-CC is not installed, it is recommended to use the following options in

-order to use an ANSI C compiler:

-

- ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"

-

-and if that doesn't work, install pre-built binaries of GCC for HP-UX.

-

- On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot

-parse its `<wchar.h>' header file. The option `-nodtk' can be used as

-a workaround. If GNU CC is not installed, it is therefore recommended

-to try

-

- ./configure CC="cc"

-

-and if that doesn't work, try

-

- ./configure CC="cc -nodtk"

-

- On Solaris, don't put `/usr/ucb' early in your `PATH'. This

-directory contains several dysfunctional programs; working variants of

-these programs are available in `/usr/bin'. So, if you need `/usr/ucb'

-in your `PATH', put it _after_ `/usr/bin'.

-

- On Haiku, software installed for all users goes in `/boot/common',

-not `/usr/local'. It is recommended to use the following options:

-

- ./configure --prefix=/boot/common

-

-Specifying the System Type

-==========================

-

- There may be some features `configure' cannot figure out

-automatically, but needs to determine by the type of machine the package

-will run on. Usually, assuming the package is built to be run on the

-_same_ architectures, `configure' can figure that out, but if it prints

-a message saying it cannot guess the machine type, give it the

-`--build=TYPE' option. TYPE can either be a short name for the system

-type, such as `sun4', or a canonical name which has the form:

-

- CPU-COMPANY-SYSTEM

-

-where SYSTEM can have one of these forms:

-

- OS

- KERNEL-OS

-

- See the file `config.sub' for the possible values of each field. If

-`config.sub' isn't included in this package, then this package doesn't

-need to know the machine type.

-

- If you are _building_ compiler tools for cross-compiling, you should

-use the option `--target=TYPE' to select the type of system they will

-produce code for.

-

- If you want to _use_ a cross compiler, that generates code for a

-platform different from the build platform, you should specify the

-"host" platform (i.e., that on which the generated programs will

-eventually be run) with `--host=TYPE'.

-

-Sharing Defaults

-================

-

- If you want to set default values for `configure' scripts to share,

-you can create a site shell script called `config.site' that gives

-default values for variables like `CC', `cache_file', and `prefix'.

-`configure' looks for `PREFIX/share/config.site' if it exists, then

-`PREFIX/etc/config.site' if it exists. Or, you can set the

-`CONFIG_SITE' environment variable to the location of the site script.

-A warning: not all `configure' scripts look for a site script.

-

-Defining Variables

-==================

-

- Variables not defined in a site shell script can be set in the

-environment passed to `configure'. However, some packages may run

-configure again during the build, and the customized values of these

-variables may be lost. In order to avoid this problem, you should set

-them in the `configure' command line, using `VAR=value'. For example:

-

- ./configure CC=/usr/local2/bin/gcc

-

-causes the specified `gcc' to be used as the C compiler (unless it is

-overridden in the site shell script).

-

-Unfortunately, this technique does not work for `CONFIG_SHELL' due to

-an Autoconf bug. Until the bug is fixed you can use this workaround:

-

- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash

-

-`configure' Invocation

-======================

-

- `configure' recognizes the following options to control how it

-operates.

-

-`--help'

-`-h'

- Print a summary of all of the options to `configure', and exit.

-

-`--help=short'

-`--help=recursive'

- Print a summary of the options unique to this package's

- `configure', and exit. The `short' variant lists options used

- only in the top level, while the `recursive' variant lists options

- also present in any nested packages.

-

-`--version'

-`-V'

- Print the version of Autoconf used to generate the `configure'

- script, and exit.

-

-`--cache-file=FILE'

- Enable the cache: use and save the results of the tests in FILE,

- traditionally `config.cache'. FILE defaults to `/dev/null' to

- disable caching.

-

-`--config-cache'

-`-C'

- Alias for `--cache-file=config.cache'.

-

-`--quiet'

-`--silent'

-`-q'

- Do not print messages saying which checks are being made. To

- suppress all normal output, redirect it to `/dev/null' (any error

- messages will still be shown).

-

-`--srcdir=DIR'

- Look for the package's source code in directory DIR. Usually

- `configure' can determine that directory automatically.

-

-`--prefix=DIR'

- Use DIR as the installation prefix. *Note Installation Names::

- for more details, including other options available for fine-tuning

- the installation locations.

-

-`--no-create'

-`-n'

- Run the configure checks, but stop before creating any output

- files.

-

-`configure' also accepts some other, not widely useful, options. Run

-`configure --help' for more details.

-

-# Makefile.in generated by automake 1.11.1 from Makefile.am.

-# @configure_input@

-

-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,

-# Inc.

-# This Makefile.in is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# This program is distributed in the hope that it will be useful,

-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

-# PARTICULAR PURPOSE.

-

-@SET_MAKE@

-VPATH = @srcdir@

-pkgdatadir = $(datadir)/@PACKAGE@

-pkgincludedir = $(includedir)/@PACKAGE@

-pkglibdir = $(libdir)/@PACKAGE@

-pkglibexecdir = $(libexecdir)/@PACKAGE@

-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

-install_sh_DATA = $(install_sh) -c -m 644

-install_sh_PROGRAM = $(install_sh) -c

-install_sh_SCRIPT = $(install_sh) -c

-INSTALL_HEADER = $(INSTALL_DATA)

-transform = $(program_transform_name)

-NORMAL_INSTALL = :

-PRE_INSTALL = :

-POST_INSTALL = :

-NORMAL_UNINSTALL = :

-PRE_UNINSTALL = :

-POST_UNINSTALL = :

-build_triplet = @build@

-host_triplet = @host@

-subdir = .

-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \

- $(srcdir)/Makefile.in $(srcdir)/config.h.in \

- $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \

- config.guess config.sub depcomp install-sh ltmain.sh missing \

- mkinstalldirs

-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

-am__aclocal_m4_deps = $(top_srcdir)/m4/intltool.m4 \

- $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \

- $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \

- $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac

-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

- $(ACLOCAL_M4)

-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \

- configure.lineno config.status.lineno

-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs

-CONFIG_HEADER = config.h

-CONFIG_CLEAN_FILES =

-CONFIG_CLEAN_VPATH_FILES =

-AM_V_GEN = $(am__v_GEN_$(V))

-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))

-am__v_GEN_0 = @echo " GEN " $@;

-AM_V_at = $(am__v_at_$(V))

-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))

-am__v_at_0 = @

-SOURCES =

-DIST_SOURCES =

-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \

- html-recursive info-recursive install-data-recursive \

- install-dvi-recursive install-exec-recursive \

- install-html-recursive install-info-recursive \

- install-pdf-recursive install-ps-recursive install-recursive \

- installcheck-recursive installdirs-recursive pdf-recursive \

- ps-recursive uninstall-recursive

-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \

- distclean-recursive maintainer-clean-recursive

-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \

- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \

- distdir dist dist-all distcheck

-ETAGS = etags

-CTAGS = ctags

-DIST_SUBDIRS = $(SUBDIRS)

-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

-distdir = $(PACKAGE)-$(VERSION)

-top_distdir = $(distdir)

-am__remove_distdir = \

- { test ! -d "$(distdir)" \

- || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \

- && rm -fr "$(distdir)"; }; }

-am__relativize = \

- dir0=`pwd`; \

- sed_first='s,^\([^/]*\)/.*$$,\1,'; \

- sed_rest='s,^[^/]*/*,,'; \

- sed_last='s,^.*/\([^/]*\)$$,\1,'; \

- sed_butlast='s,/*[^/]*$$,,'; \

- while test -n "$$dir1"; do \

- first=`echo "$$dir1" | sed -e "$$sed_first"`; \

- if test "$$first" != "."; then \

- if test "$$first" = ".."; then \

- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \

- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \

- else \

- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \

- if test "$$first2" = "$$first"; then \

- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \

- else \

- dir2="../$$dir2"; \

- fi; \

- dir0="$$dir0"/"$$first"; \

- fi; \

- fi; \

- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \

- done; \

- reldir="$$dir2"

-GZIP_ENV = --best

-DIST_ARCHIVES = $(distdir).tar.bz2

-distuninstallcheck_listfiles = find . -type f -print

-distcleancheck_listfiles = find . -type f -print

-ACLOCAL = @ACLOCAL@

-ACLOCAL_AMFLAGS = -I m4

-ALL_LINGUAS = @ALL_LINGUAS@

-AMTAR = @AMTAR@

-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@

-AR = @AR@

-AUTOCONF = @AUTOCONF@

-AUTOHEADER = @AUTOHEADER@

-AUTOMAKE = @AUTOMAKE@

-AWK = @AWK@

-CATALOGS = @CATALOGS@

-CATOBJEXT = @CATOBJEXT@

-CC = @CC@

-CCDEPMODE = @CCDEPMODE@

-CFLAGS = @CFLAGS@

-CPP = @CPP@

-CPPFLAGS = @CPPFLAGS@

-CYGPATH_W = @CYGPATH_W@

-DATADIRNAME = @DATADIRNAME@

-DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@

-DBUS_GLIB_LIBS = @DBUS_GLIB_LIBS@

-DEFAULT_WM = @DEFAULT_WM@

-DEFS = @DEFS@

-DEPDIR = @DEPDIR@

-DISABLE_DEPRECATED = @DISABLE_DEPRECATED@

-DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@

-DLLTOOL = @DLLTOOL@

-DSYMUTIL = @DSYMUTIL@

-DUMPBIN = @DUMPBIN@

-ECHO_C = @ECHO_C@

-ECHO_N = @ECHO_N@

-ECHO_T = @ECHO_T@

-EGG_SMCLIENT_CFLAGS = @EGG_SMCLIENT_CFLAGS@

-EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@

-EGREP = @EGREP@

-EXECINFO_LIBS = @EXECINFO_LIBS@

-EXEEXT = @EXEEXT@

-FGREP = @FGREP@

-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@

-GLIB_GENMARSHAL = @GLIB_GENMARSHAL@

-GMOFILES = @GMOFILES@

-GMSGFMT = @GMSGFMT@

-GREP = @GREP@

-HAVE_XRENDER = @HAVE_XRENDER@

-HAVE_XTEST = @HAVE_XTEST@

-ICE_CFLAGS = @ICE_CFLAGS@

-ICE_LIBS = @ICE_LIBS@

-INSTALL = @INSTALL@

-INSTALL_DATA = @INSTALL_DATA@

-INSTALL_PROGRAM = @INSTALL_PROGRAM@

-INSTALL_SCRIPT = @INSTALL_SCRIPT@

-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

-INSTOBJEXT = @INSTOBJEXT@

-INTLLIBS = @INTLLIBS@

-INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@

-INTLTOOL_MERGE = @INTLTOOL_MERGE@

-INTLTOOL_PERL = @INTLTOOL_PERL@

-INTLTOOL_UPDATE = @INTLTOOL_UPDATE@

-LD = @LD@

-LDFLAGS = @LDFLAGS@

-LIBOBJS = @LIBOBJS@

-LIBS = @LIBS@

-LIBTOOL = @LIBTOOL@

-LIPO = @LIPO@

-LN_S = @LN_S@

-LTLIBOBJS = @LTLIBOBJS@

-MAINT = @MAINT@

-MAKEINFO = @MAKEINFO@

-MANIFEST_TOOL = @MANIFEST_TOOL@

-MATECONFTOOL = @MATECONFTOOL@

-MATECONF_CFLAGS = @MATECONF_CFLAGS@

-MATECONF_LIBS = @MATECONF_LIBS@

-MATECONF_SANITY_CHECK = @MATECONF_SANITY_CHECK@

-MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@

-MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@

-MATE_SESSION_CFLAGS = @MATE_SESSION_CFLAGS@

-MATE_SESSION_LIBS = @MATE_SESSION_LIBS@

-MKDIR_P = @MKDIR_P@

-MKINSTALLDIRS = @MKINSTALLDIRS@

-MSGFMT = @MSGFMT@

-MSGFMT_OPTS = @MSGFMT_OPTS@

-MSGMERGE = @MSGMERGE@

-NM = @NM@

-NMEDIT = @NMEDIT@

-OBJDUMP = @OBJDUMP@

-OBJEXT = @OBJEXT@

-OTOOL = @OTOOL@

-OTOOL64 = @OTOOL64@

-PACKAGE = @PACKAGE@

-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

-PACKAGE_NAME = @PACKAGE_NAME@

-PACKAGE_STRING = @PACKAGE_STRING@

-PACKAGE_TARNAME = @PACKAGE_TARNAME@

-PACKAGE_URL = @PACKAGE_URL@

-PACKAGE_VERSION = @PACKAGE_VERSION@

-PATH_SEPARATOR = @PATH_SEPARATOR@

-PERL = @PERL@

-PKG_CONFIG = @PKG_CONFIG@

-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@

-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@

-POFILES = @POFILES@

-POSUB = @POSUB@

-PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@

-PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@

-RANLIB = @RANLIB@

-REBUILD = @REBUILD@

-SED = @SED@

-SESSION_PROPERTIES_CFLAGS = @SESSION_PROPERTIES_CFLAGS@

-SESSION_PROPERTIES_LIBS = @SESSION_PROPERTIES_LIBS@

-SET_MAKE = @SET_MAKE@

-SHELL = @SHELL@

-SM_CFLAGS = @SM_CFLAGS@

-SM_LIBS = @SM_LIBS@

-STRIP = @STRIP@

-USE_NLS = @USE_NLS@

-VERSION = @VERSION@

-WARN_CFLAGS = @WARN_CFLAGS@

-XEXT_CFLAGS = @XEXT_CFLAGS@

-XEXT_LIBS = @XEXT_LIBS@

-XGETTEXT = @XGETTEXT@

-XMKMF = @XMKMF@

-XMLTO = @XMLTO@

-XRENDER_CFLAGS = @XRENDER_CFLAGS@

-XRENDER_LIBS = @XRENDER_LIBS@

-XSLTPROC = @XSLTPROC@

-XTEST_CFLAGS = @XTEST_CFLAGS@

-XTEST_LIBS = @XTEST_LIBS@

-X_CFLAGS = @X_CFLAGS@

-X_EXTRA_LIBS = @X_EXTRA_LIBS@

-X_LIBS = @X_LIBS@

-X_PRE_LIBS = @X_PRE_LIBS@

-abs_builddir = @abs_builddir@

-abs_srcdir = @abs_srcdir@

-abs_top_builddir = @abs_top_builddir@

-abs_top_srcdir = @abs_top_srcdir@

-ac_ct_AR = @ac_ct_AR@

-ac_ct_CC = @ac_ct_CC@

-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@

-am__include = @am__include@

-am__leading_dot = @am__leading_dot@

-am__quote = @am__quote@

-am__tar = @am__tar@

-am__untar = @am__untar@

-bindir = @bindir@

-build = @build@

-build_alias = @build_alias@

-build_cpu = @build_cpu@

-build_os = @build_os@

-build_vendor = @build_vendor@

-builddir = @builddir@

-datadir = @datadir@

-datarootdir = @datarootdir@

-docdir = @docdir@

-dvidir = @dvidir@

-exec_prefix = @exec_prefix@

-host = @host@

-host_alias = @host_alias@

-host_cpu = @host_cpu@

-host_os = @host_os@

-host_vendor = @host_vendor@

-htmldir = @htmldir@

-includedir = @includedir@

-infodir = @infodir@

-install_sh = @install_sh@

-libdir = @libdir@

-libexecdir = @libexecdir@

-localedir = @localedir@

-localstatedir = @localstatedir@

-mandir = @mandir@

-mkdir_p = @mkdir_p@

-oldincludedir = @oldincludedir@

-pdfdir = @pdfdir@

-prefix = @prefix@

-program_transform_name = @program_transform_name@

-psdir = @psdir@

-sbindir = @sbindir@

-sharedstatedir = @sharedstatedir@

-srcdir = @srcdir@

-sysconfdir = @sysconfdir@

-target_alias = @target_alias@

-top_build_prefix = @top_build_prefix@

-top_builddir = @top_builddir@

-top_srcdir = @top_srcdir@

-SUBDIRS = \

- egg \

- mate-session \

- capplet \

- tools \

- data \

- doc \

- po

-

-EXTRA_DIST = \

- HACKING \

- MAINTAINERS

-

-MAINTAINERCLEANFILES = \

- $(srcdir)/INSTALL \

- $(srcdir)/aclocal.m4 \

- $(srcdir)/config.guess \

- $(srcdir)/config.h.in \

- $(srcdir)/config.sub \

- $(srcdir)/depcomp \

- $(srcdir)/install-sh \

- $(srcdir)/ltmain.sh \

- $(srcdir)/missing \

- $(srcdir)/mkinstalldirs \

- $(srcdir)/configure \

- $(srcdir)/m4/intltool.m4 \

- `find "$(srcdir)" -type f -name Makefile.in -print`

-

-all: config.h

- $(MAKE) $(AM_MAKEFLAGS) all-recursive

-

-.SUFFIXES:

-am--refresh:

- @:

-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)

- @for dep in $?; do \

- case '$(am__configure_deps)' in \

- *$$dep*) \

- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \

- $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \

- && exit 0; \

- exit 1;; \

- esac; \

- done; \

- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \

- $(am__cd) $(top_srcdir) && \

- $(AUTOMAKE) --gnu Makefile

-.PRECIOUS: Makefile

-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

- @case '$?' in \

- *config.status*) \

- echo ' $(SHELL) ./config.status'; \

- $(SHELL) ./config.status;; \

- *) \

- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \

- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \

- esac;

-

-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

- $(SHELL) ./config.status --recheck

-

-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)

- $(am__cd) $(srcdir) && $(AUTOCONF)

-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)

- $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

-$(am__aclocal_m4_deps):

-

-config.h: stamp-h1

- @if test ! -f $@; then \

- rm -f stamp-h1; \

- $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \

- else :; fi

-

-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status

- @rm -f stamp-h1

- cd $(top_builddir) && $(SHELL) ./config.status config.h

-$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)

- ($(am__cd) $(top_srcdir) && $(AUTOHEADER))

- rm -f stamp-h1

- touch $@

-

-distclean-hdr:

- -rm -f config.h stamp-h1

-

-mostlyclean-libtool:

- -rm -f *.lo

-

-clean-libtool:

- -rm -rf .libs _libs

-

-distclean-libtool:

- -rm -f libtool config.lt

-

-# This directory's subdirectories are mostly independent; you can cd

-# into them and run `make' without going through this Makefile.

-# To change the values of `make' variables: instead of editing Makefiles,

-# (1) if the variable is set in `config.status', edit `config.status'

-# (which will cause the Makefiles to be regenerated when you run `make');

-# (2) otherwise, pass the desired values on the `make' command line.

-$(RECURSIVE_TARGETS):

- @fail= failcom='exit 1'; \

- for f in x $$MAKEFLAGS; do \

- case $$f in \

- *=* | --[!k]*);; \

- *k*) failcom='fail=yes';; \

- esac; \

- done; \

- dot_seen=no; \

- target=`echo $@ | sed s/-recursive//`; \

- list='$(SUBDIRS)'; for subdir in $$list; do \

- echo "Making $$target in $$subdir"; \

- if test "$$subdir" = "."; then \

- dot_seen=yes; \

- local_target="$$target-am"; \

- else \

- local_target="$$target"; \

- fi; \

- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

- || eval $$failcom; \

- done; \

- if test "$$dot_seen" = "no"; then \

- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \

- fi; test -z "$$fail"

-

-$(RECURSIVE_CLEAN_TARGETS):

- @fail= failcom='exit 1'; \

- for f in x $$MAKEFLAGS; do \

- case $$f in \

- *=* | --[!k]*);; \

- *k*) failcom='fail=yes';; \

- esac; \

- done; \

- dot_seen=no; \

- case "$@" in \

- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \

- *) list='$(SUBDIRS)' ;; \

- esac; \

- rev=''; for subdir in $$list; do \

- if test "$$subdir" = "."; then :; else \

- rev="$$subdir $$rev"; \

- fi; \

- done; \

- rev="$$rev ."; \

- target=`echo $@ | sed s/-recursive//`; \

- for subdir in $$rev; do \

- echo "Making $$target in $$subdir"; \

- if test "$$subdir" = "."; then \

- local_target="$$target-am"; \

- else \

- local_target="$$target"; \

- fi; \

- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

- || eval $$failcom; \

- done && test -z "$$fail"

-tags-recursive:

- list='$(SUBDIRS)'; for subdir in $$list; do \

- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \

- done

-ctags-recursive:

- list='$(SUBDIRS)'; for subdir in $$list; do \

- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \

- done

-

-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)

- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

- unique=`for i in $$list; do \

- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

- done | \

- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

- END { if (nonempty) { for (i in files) print i; }; }'`; \

- mkid -fID $$unique

-tags: TAGS

-

-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \

- $(TAGS_FILES) $(LISP)

- set x; \

- here=`pwd`; \

- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \

- include_option=--etags-include; \

- empty_fix=.; \

- else \

- include_option=--include; \

- empty_fix=; \

- fi; \

- list='$(SUBDIRS)'; for subdir in $$list; do \

- if test "$$subdir" = .; then :; else \

- test ! -f $$subdir/TAGS || \

- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \

- fi; \

- done; \

- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \

- unique=`for i in $$list; do \

- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

- done | \

- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

- END { if (nonempty) { for (i in files) print i; }; }'`; \

- shift; \

- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \

- test -n "$$unique" || unique=$$empty_fix; \

- if test $$# -gt 0; then \

- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

- "$$@" $$unique; \

- else \

- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

- $$unique; \

- fi; \

- fi

-ctags: CTAGS

-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \

- $(TAGS_FILES) $(LISP)

- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \

- unique=`for i in $$list; do \

- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

- done | \

- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

- END { if (nonempty) { for (i in files) print i; }; }'`; \

- test -z "$(CTAGS_ARGS)$$unique" \

- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \

- $$unique

-

-GTAGS:

- here=`$(am__cd) $(top_builddir) && pwd` \

- && $(am__cd) $(top_srcdir) \

- && gtags -i $(GTAGS_ARGS) "$$here"

-

-distclean-tags:

- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

-

-distdir: $(DISTFILES)

- $(am__remove_distdir)

- test -d "$(distdir)" || mkdir "$(distdir)"

- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

- list='$(DISTFILES)'; \

- dist_files=`for file in $$list; do echo $$file; done | \

- sed -e "s|^$$srcdirstrip/||;t" \

- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

- case $$dist_files in \

- */*) $(MKDIR_P) `echo "$$dist_files" | \

- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

- sort -u` ;; \

- esac; \

- for file in $$dist_files; do \

- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

- if test -d $$d/$$file; then \

- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

- if test -d "$(distdir)/$$file"; then \

- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

- fi; \

- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

- fi; \

- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

- else \

- test -f "$(distdir)/$$file" \

- || cp -p $$d/$$file "$(distdir)/$$file" \

- || exit 1; \

- fi; \

- done

- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \

- if test "$$subdir" = .; then :; else \

- test -d "$(distdir)/$$subdir" \

- || $(MKDIR_P) "$(distdir)/$$subdir" \

- || exit 1; \

- fi; \

- done

- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \

- if test "$$subdir" = .; then :; else \

- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \

- $(am__relativize); \

- new_distdir=$$reldir; \

- dir1=$$subdir; dir2="$(top_distdir)"; \

- $(am__relativize); \

- new_top_distdir=$$reldir; \

- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \

- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \

- ($(am__cd) $$subdir && \

- $(MAKE) $(AM_MAKEFLAGS) \

- top_distdir="$$new_top_distdir" \

- distdir="$$new_distdir" \

- am__remove_distdir=: \

- am__skip_length_check=: \

- am__skip_mode_fix=: \

- distdir) \

- || exit 1; \

- fi; \

- done

- -test -n "$(am__skip_mode_fix)" \

- || find "$(distdir)" -type d ! -perm -755 \

- -exec chmod u+rwx,go+rx {} \; -o \

- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \

- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \

- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \

- || chmod -R a+r "$(distdir)"

-dist-gzip: distdir

- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz

- $(am__remove_distdir)

-dist-bzip2: distdir

- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2

- $(am__remove_distdir)

-

-dist-lzma: distdir

- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma

- $(am__remove_distdir)

-

-dist-xz: distdir

- tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz

- $(am__remove_distdir)

-

-dist-tarZ: distdir

- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z

- $(am__remove_distdir)

-

-dist-shar: distdir

- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz

- $(am__remove_distdir)

-

-dist-zip: distdir

- -rm -f $(distdir).zip

- zip -rq $(distdir).zip $(distdir)

- $(am__remove_distdir)

-

-dist dist-all: distdir

- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2

- $(am__remove_distdir)

-

-# This target untars the dist file and tries a VPATH configuration. Then

-# it guarantees that the distribution is self-contained by making another

-# tarfile.

-distcheck: dist

- case '$(DIST_ARCHIVES)' in \

- *.tar.gz*) \

- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\

- *.tar.bz2*) \

- bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\

- *.tar.lzma*) \

- lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\

- *.tar.xz*) \

- xz -dc $(distdir).tar.xz | $(am__untar) ;;\

- *.tar.Z*) \

- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\

- *.shar.gz*) \

- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\

- *.zip*) \

- unzip $(distdir).zip ;;\

- esac

- chmod -R a-w $(distdir); chmod a+w $(distdir)

- mkdir $(distdir)/_build

- mkdir $(distdir)/_inst

- chmod a-w $(distdir)

- test -d $(distdir)/_build || exit 0; \

- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \

- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \

- && am__cwd=`pwd` \

- && $(am__cd) $(distdir)/_build \

- && ../configure --srcdir=.. --prefix="$$dc_install_base" \

- $(DISTCHECK_CONFIGURE_FLAGS) \

- && $(MAKE) $(AM_MAKEFLAGS) \

- && $(MAKE) $(AM_MAKEFLAGS) dvi \

- && $(MAKE) $(AM_MAKEFLAGS) check \

- && $(MAKE) $(AM_MAKEFLAGS) install \

- && $(MAKE) $(AM_MAKEFLAGS) installcheck \

- && $(MAKE) $(AM_MAKEFLAGS) uninstall \

- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \

- distuninstallcheck \

- && chmod -R a-w "$$dc_install_base" \

- && ({ \

- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \

- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \

- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \

- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \

- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \

- } || { rm -rf "$$dc_destdir"; exit 1; }) \

- && rm -rf "$$dc_destdir" \

- && $(MAKE) $(AM_MAKEFLAGS) dist \

- && rm -rf $(DIST_ARCHIVES) \

- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \

- && cd "$$am__cwd" \

- || exit 1

- $(am__remove_distdir)

- @(echo "$(distdir) archives ready for distribution: "; \

- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \

- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'

-distuninstallcheck:

- @$(am__cd) '$(distuninstallcheck_dir)' \

- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \

- || { echo "ERROR: files left after uninstall:" ; \

- if test -n "$(DESTDIR)"; then \

- echo " (check DESTDIR support)"; \

- fi ; \

- $(distuninstallcheck_listfiles) ; \

- exit 1; } >&2

-distcleancheck: distclean

- @if test '$(srcdir)' = . ; then \

- echo "ERROR: distcleancheck can only run from a VPATH build" ; \

- exit 1 ; \

- fi

- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \

- || { echo "ERROR: files left in build directory after distclean:" ; \

- $(distcleancheck_listfiles) ; \

- exit 1; } >&2

-check-am: all-am

-check: check-recursive

-all-am: Makefile config.h

-installdirs: installdirs-recursive

-installdirs-am:

-install: install-recursive

-install-exec: install-exec-recursive

-install-data: install-data-recursive

-uninstall: uninstall-recursive

-

-install-am: all-am

- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

-

-installcheck: installcheck-recursive

-install-strip:

- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

- `test -z '$(STRIP)' || \

- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install

-mostlyclean-generic:

-

-clean-generic:

-

-distclean-generic:

- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

-

-maintainer-clean-generic:

- @echo "This command is intended for maintainers to use"

- @echo "it deletes files that may require special tools to rebuild."

- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)

-clean: clean-recursive

-

-clean-am: clean-generic clean-libtool mostlyclean-am

-

-distclean: distclean-recursive

- -rm -f $(am__CONFIG_DISTCLEAN_FILES)

- -rm -f Makefile

-distclean-am: clean-am distclean-generic distclean-hdr \

- distclean-libtool distclean-tags

-

-dvi: dvi-recursive

-

-dvi-am:

-

-html: html-recursive

-

-html-am:

-

-info: info-recursive

-

-info-am:

-

-install-data-am:

-

-install-dvi: install-dvi-recursive

-

-install-dvi-am:

-

-install-exec-am:

-

-install-html: install-html-recursive

-

-install-html-am:

-

-install-info: install-info-recursive

-

-install-info-am:

-

-install-man:

-

-install-pdf: install-pdf-recursive

-

-install-pdf-am:

-

-install-ps: install-ps-recursive

-

-install-ps-am:

-

-installcheck-am:

-

-maintainer-clean: maintainer-clean-recursive

- -rm -f $(am__CONFIG_DISTCLEAN_FILES)

- -rm -rf $(top_srcdir)/autom4te.cache

- -rm -f Makefile

-maintainer-clean-am: distclean-am maintainer-clean-generic

-

-mostlyclean: mostlyclean-recursive

-

-mostlyclean-am: mostlyclean-generic mostlyclean-libtool

-

-pdf: pdf-recursive

-

-pdf-am:

-

-ps: ps-recursive

-

-ps-am:

-

-uninstall-am:

-

-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \

- ctags-recursive install-am install-strip tags-recursive

-

-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \

- all all-am am--refresh check check-am clean clean-generic \

- clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \

- dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \

- distcheck distclean distclean-generic distclean-hdr \

- distclean-libtool distclean-tags distcleancheck distdir \

- distuninstallcheck dvi dvi-am html html-am info info-am \

- install install-am install-data install-data-am install-dvi \

- install-dvi-am install-exec install-exec-am install-html \

- install-html-am install-info install-info-am install-man \

- install-pdf install-pdf-am install-ps install-ps-am \

- install-strip installcheck installcheck-am installdirs \

- installdirs-am maintainer-clean maintainer-clean-generic \

- mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \

- ps ps-am tags tags-recursive uninstall uninstall-am

-

-

--include $(top_srcdir)/git.mk

-

-# Tell versions [3.59,3.63) of GNU make to not export all variables.

-# Otherwise a system limit (for SysV at least) may be exceeded.

-.NOEXPORT:

-# generated automatically by aclocal 1.11.1 -*- Autoconf -*-

-

-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,

-# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# This program is distributed in the hope that it will be useful,

-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

-# PARTICULAR PURPOSE.

-

-m4_ifndef([AC_AUTOCONF_VERSION],

- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl

-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,

-[m4_warning([this file was generated for autoconf 2.68.

-You have another version of autoconf. It may work, but is not guaranteed to.

-If you have problems, you may need to regenerate the build system entirely.

-To do so, use the procedure documented by the package, typically `autoreconf'.])])

-

-# Copyright (C) 1995-2002 Free Software Foundation, Inc.

-# Copyright (C) 2001-2003,2004 Red Hat, Inc.

-#

-# This file is free software, distributed under the terms of the GNU

-# General Public License. As a special exception to the GNU General

-# Public License, this file may be distributed as part of a program

-# that contains a configuration script generated by Autoconf, under

-# the same distribution terms as the rest of that program.

-#

-# This file can be copied and used freely without restrictions. It can

-# be used in projects which are not available under the GNU Public License

-# but which still want to provide support for the GNU gettext functionality.

-#

-# Macro to add for using GNU gettext.

-# Ulrich Drepper <[email protected]>, 1995, 1996

-#

-# Modified to never use included libintl.

-# Owen Taylor <[email protected]>, 12/15/1998

-#

-# Major rework to remove unused code

-# Owen Taylor <[email protected]>, 12/11/2002

-#

-# Added better handling of ALL_LINGUAS from GNU gettext version

-# written by Bruno Haible, Owen Taylor <otaylor.redhat.com> 5/30/3002

-#

-# Modified to require ngettext

-# Matthias Clasen <[email protected]> 08/06/2004

-#

-# We need this here as well, since someone might use autoconf-2.5x

-# to configure GLib then an older version to configure a package

-# using AM_GLIB_GNU_GETTEXT

-AC_PREREQ(2.53)

-

-dnl

-dnl We go to great lengths to make sure that aclocal won't

-dnl try to pull in the installed version of these macros

-dnl when running aclocal in the glib directory.

-dnl

-m4_copy([AC_DEFUN],[glib_DEFUN])

-m4_copy([AC_REQUIRE],[glib_REQUIRE])

-dnl

-dnl At the end, if we're not within glib, we'll define the public

-dnl definitions in terms of our private definitions.

-dnl

-

-# GLIB_LC_MESSAGES

-#--------------------

-glib_DEFUN([GLIB_LC_MESSAGES],

- [AC_CHECK_HEADERS([locale.h])

- if test $ac_cv_header_locale_h = yes; then

- AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,

- [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],

- am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])

- if test $am_cv_val_LC_MESSAGES = yes; then

- AC_DEFINE(HAVE_LC_MESSAGES, 1,

- [Define if your <locale.h> file defines LC_MESSAGES.])

- fi

- fi])

-

-# GLIB_PATH_PROG_WITH_TEST

-#----------------------------

-dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,

-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])

-glib_DEFUN([GLIB_PATH_PROG_WITH_TEST],

-[# Extract the first word of "$2", so it can be a program name with args.

-set dummy $2; ac_word=[$]2

-AC_MSG_CHECKING([for $ac_word])

-AC_CACHE_VAL(ac_cv_path_$1,

-[case "[$]$1" in

- /*)

- ac_cv_path_$1="[$]$1" # Let the user override the test with a path.

- ;;

- *)

- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"

- for ac_dir in ifelse([$5], , $PATH, [$5]); do

- test -z "$ac_dir" && ac_dir=.

- if test -f $ac_dir/$ac_word; then

- if [$3]; then

- ac_cv_path_$1="$ac_dir/$ac_word"

- break

- fi

- fi

- done

- IFS="$ac_save_ifs"

-dnl If no 4th arg is given, leave the cache variable unset,

-dnl so AC_PATH_PROGS will keep looking.

-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"

-])dnl

- ;;

-esac])dnl

-$1="$ac_cv_path_$1"

-if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then

- AC_MSG_RESULT([$]$1)

-else

- AC_MSG_RESULT(no)

-fi

-AC_SUBST($1)dnl

-])

-

-# GLIB_WITH_NLS

-#-----------------

-glib_DEFUN([GLIB_WITH_NLS],

- dnl NLS is obligatory

- [USE_NLS=yes

- AC_SUBST(USE_NLS)

-

- gt_cv_have_gettext=no

-

- CATOBJEXT=NONE

- XGETTEXT=:

- INTLLIBS=

-

- AC_CHECK_HEADER(libintl.h,

- [gt_cv_func_dgettext_libintl="no"

- libintl_extra_libs=""

-

- #

- # First check in libc

- #

- AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc,

- [AC_TRY_LINK([

-#include <libintl.h>

-],

- [return !ngettext ("","", 1)],

- gt_cv_func_ngettext_libc=yes,

- gt_cv_func_ngettext_libc=no)

- ])

-

- if test "$gt_cv_func_ngettext_libc" = "yes" ; then

- AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc,

- [AC_TRY_LINK([

-#include <libintl.h>

-],

- [return !dgettext ("","")],

- gt_cv_func_dgettext_libc=yes,

- gt_cv_func_dgettext_libc=no)

- ])

- fi

-

- if test "$gt_cv_func_ngettext_libc" = "yes" ; then

- AC_CHECK_FUNCS(bind_textdomain_codeset)

- fi

-

- #

- # If we don't have everything we want, check in libintl

- #

- if test "$gt_cv_func_dgettext_libc" != "yes" \

- || test "$gt_cv_func_ngettext_libc" != "yes" \

- || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then

-

- AC_CHECK_LIB(intl, bindtextdomain,

- [AC_CHECK_LIB(intl, ngettext,

- [AC_CHECK_LIB(intl, dgettext,

- gt_cv_func_dgettext_libintl=yes)])])

-

- if test "$gt_cv_func_dgettext_libintl" != "yes" ; then

- AC_MSG_CHECKING([if -liconv is needed to use gettext])

- AC_MSG_RESULT([])

- AC_CHECK_LIB(intl, ngettext,

- [AC_CHECK_LIB(intl, dcgettext,

- [gt_cv_func_dgettext_libintl=yes

- libintl_extra_libs=-liconv],

- :,-liconv)],

- :,-liconv)

- fi

-

- #

- # If we found libintl, then check in it for bind_textdomain_codeset();

- # we'll prefer libc if neither have bind_textdomain_codeset(),

- # and both have dgettext and ngettext

- #

- if test "$gt_cv_func_dgettext_libintl" = "yes" ; then

- glib_save_LIBS="$LIBS"

- LIBS="$LIBS -lintl $libintl_extra_libs"

- unset ac_cv_func_bind_textdomain_codeset

- AC_CHECK_FUNCS(bind_textdomain_codeset)

- LIBS="$glib_save_LIBS"

-

- if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then

- gt_cv_func_dgettext_libc=no

- else

- if test "$gt_cv_func_dgettext_libc" = "yes" \

- && test "$gt_cv_func_ngettext_libc" = "yes"; then

- gt_cv_func_dgettext_libintl=no

- fi

- fi

- fi

- fi

-

- if test "$gt_cv_func_dgettext_libc" = "yes" \

- || test "$gt_cv_func_dgettext_libintl" = "yes"; then

- gt_cv_have_gettext=yes

- fi

-

- if test "$gt_cv_func_dgettext_libintl" = "yes"; then

- INTLLIBS="-lintl $libintl_extra_libs"

- fi

-

- if test "$gt_cv_have_gettext" = "yes"; then

- AC_DEFINE(HAVE_GETTEXT,1,

- [Define if the GNU gettext() function is already present or preinstalled.])

- GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,

- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl

- if test "$MSGFMT" != "no"; then

- glib_save_LIBS="$LIBS"

- LIBS="$LIBS $INTLLIBS"

- AC_CHECK_FUNCS(dcgettext)

- MSGFMT_OPTS=

- AC_MSG_CHECKING([if msgfmt accepts -c])

- GLIB_RUN_PROG([$MSGFMT -c -o /dev/null],[

-msgid ""

-msgstr ""

-"Content-Type: text/plain; charset=UTF-8\n"

-"Project-Id-Version: test 1.0\n"

-"PO-Revision-Date: 2007-02-15 12:01+0100\n"

-"Last-Translator: test <[email protected]>\n"

-"Language-Team: C <[email protected]>\n"

-"MIME-Version: 1.0\n"

-"Content-Transfer-Encoding: 8bit\n"

-], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])])

- AC_SUBST(MSGFMT_OPTS)

- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)

- GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,

- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)

- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;

- return _nl_msg_cat_cntr],

- [CATOBJEXT=.gmo

- DATADIRNAME=share],

- [case $host in

- *-*-solaris*)

- dnl On Solaris, if bind_textdomain_codeset is in libc,

- dnl GNU format message catalog is always supported,

- dnl since both are added to the libc all together.

- dnl Hence, we'd like to go with DATADIRNAME=share and

- dnl and CATOBJEXT=.gmo in this case.

- AC_CHECK_FUNC(bind_textdomain_codeset,

- [CATOBJEXT=.gmo

- DATADIRNAME=share],

- [CATOBJEXT=.mo

- DATADIRNAME=lib])

- ;;

- *-*-openbsd*)

- CATOBJEXT=.mo

- DATADIRNAME=share

- ;;

- *)

- CATOBJEXT=.mo

- DATADIRNAME=lib

- ;;

- esac])

- LIBS="$glib_save_LIBS"

- INSTOBJEXT=.mo

- else

- gt_cv_have_gettext=no

- fi

- fi

- ])

-

- if test "$gt_cv_have_gettext" = "yes" ; then

- AC_DEFINE(ENABLE_NLS, 1,

- [always defined to indicate that i18n is enabled])

- fi

-

- dnl Test whether we really found GNU xgettext.

- if test "$XGETTEXT" != ":"; then

- dnl If it is not GNU xgettext we define it as : so that the

- dnl Makefiles still can work.

- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then

- : ;

- else

- AC_MSG_RESULT(

- [found xgettext program is not GNU xgettext; ignore it])

- XGETTEXT=":"

- fi

- fi

-

- # We need to process the po/ directory.

- POSUB=po

-

- AC_OUTPUT_COMMANDS(

- [case "$CONFIG_FILES" in *po/Makefile.in*)

- sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile

- esac])

-

- dnl These rules are solely for the distribution goal. While doing this

- dnl we only have to keep exactly one list of the available catalogs

- dnl in configure.ac.

- for lang in $ALL_LINGUAS; do

- GMOFILES="$GMOFILES $lang.gmo"

- POFILES="$POFILES $lang.po"

- done

-

- dnl Make all variables we use known to autoconf.

- AC_SUBST(CATALOGS)

- AC_SUBST(CATOBJEXT)

- AC_SUBST(DATADIRNAME)

- AC_SUBST(GMOFILES)

- AC_SUBST(INSTOBJEXT)

- AC_SUBST(INTLLIBS)

- AC_SUBST(PO_IN_DATADIR_TRUE)

- AC_SUBST(PO_IN_DATADIR_FALSE)

- AC_SUBST(POFILES)

- AC_SUBST(POSUB)

- ])

-

-# AM_GLIB_GNU_GETTEXT

-# -------------------

-# Do checks necessary for use of gettext. If a suitable implementation

-# of gettext is found in either in libintl or in the C library,

-# it will set INTLLIBS to the libraries needed for use of gettext

-# and AC_DEFINE() HAVE_GETTEXT and ENABLE_NLS. (The shell variable

-# gt_cv_have_gettext will be set to "yes".) It will also call AC_SUBST()

-# on various variables needed by the Makefile.in.in installed by

-# glib-gettextize.

-dnl

-glib_DEFUN([GLIB_GNU_GETTEXT],

- [AC_REQUIRE([AC_PROG_CC])dnl

- AC_REQUIRE([AC_HEADER_STDC])dnl

-

- GLIB_LC_MESSAGES

- GLIB_WITH_NLS

-

- if test "$gt_cv_have_gettext" = "yes"; then

- if test "x$ALL_LINGUAS" = "x"; then

- LINGUAS=

- else

- AC_MSG_CHECKING(for catalogs to be installed)

- NEW_LINGUAS=

- for presentlang in $ALL_LINGUAS; do

- useit=no

- if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then

- desiredlanguages="$LINGUAS"

- else

- desiredlanguages="$ALL_LINGUAS"

- fi

- for desiredlang in $desiredlanguages; do

- # Use the presentlang catalog if desiredlang is

- # a. equal to presentlang, or

- # b. a variant of presentlang (because in this case,

- # presentlang can be used as a fallback for messages

- # which are not translated in the desiredlang catalog).

- case "$desiredlang" in

- "$presentlang"*) useit=yes;;

- esac

- done

- if test $useit = yes; then

- NEW_LINGUAS="$NEW_LINGUAS $presentlang"

- fi

- done

- LINGUAS=$NEW_LINGUAS

- AC_MSG_RESULT($LINGUAS)

- fi

-

- dnl Construct list of names of catalog files to be constructed.

- if test -n "$LINGUAS"; then

- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done

- fi

- fi

-

- dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly

- dnl find the mkinstalldirs script in another subdir but ($top_srcdir).

- dnl Try to locate is.

- MKINSTALLDIRS=

- if test -n "$ac_aux_dir"; then

- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"

- fi

- if test -z "$MKINSTALLDIRS"; then

- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"

- fi

- AC_SUBST(MKINSTALLDIRS)

-

- dnl Generate list of files to be processed by xgettext which will

- dnl be included in po/Makefile.

- test -d po || mkdir po

- if test "x$srcdir" != "x."; then

- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then

- posrcprefix="$srcdir/"

- else

- posrcprefix="../$srcdir/"

- fi

- else

- posrcprefix="../"

- fi

- rm -f po/POTFILES

- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \

- < $srcdir/po/POTFILES.in > po/POTFILES

- ])

-

-# AM_GLIB_DEFINE_LOCALEDIR(VARIABLE)

-# -------------------------------

-# Define VARIABLE to the location where catalog files will

-# be installed by po/Makefile.

-glib_DEFUN([GLIB_DEFINE_LOCALEDIR],

-[glib_REQUIRE([GLIB_GNU_GETTEXT])dnl

-glib_save_prefix="$prefix"

-glib_save_exec_prefix="$exec_prefix"

-glib_save_datarootdir="$datarootdir"

-test "x$prefix" = xNONE && prefix=$ac_default_prefix

-test "x$exec_prefix" = xNONE && exec_prefix=$prefix

-datarootdir=`eval echo "${datarootdir}"`

-if test "x$CATOBJEXT" = "x.mo" ; then

- localedir=`eval echo "${libdir}/locale"`

-else

- localedir=`eval echo "${datadir}/locale"`

-fi

-prefix="$glib_save_prefix"

-exec_prefix="$glib_save_exec_prefix"

-datarootdir="$glib_save_datarootdir"

-AC_DEFINE_UNQUOTED($1, "$localedir",

- [Define the location where the catalogs will be installed])

-])

-

-dnl

-dnl Now the definitions that aclocal will find

-dnl

-ifdef(glib_configure_ac,[],[

-AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)])

-AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)])

-])dnl

-

-# GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL])

-#

-# Create a temporary file with TEST-FILE as its contents and pass the

-# file name to PROGRAM. Perform ACTION-IF-PASS if PROGRAM exits with

-# 0 and perform ACTION-IF-FAIL for any other exit status.

-AC_DEFUN([GLIB_RUN_PROG],

-[cat >conftest.foo <<_ACEOF

-$2

-_ACEOF

-if AC_RUN_LOG([$1 conftest.foo]); then

- m4_ifval([$3], [$3], [:])

-m4_ifvaln([$4], [else $4])dnl

-echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD

-sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD

-fi])

-

-

-# mate-common.m4

-#

-

-dnl MATE_COMMON_INIT

-

-AC_DEFUN([MATE_COMMON_INIT],

-[

- dnl this macro should come after AC_CONFIG_MACRO_DIR

- AC_BEFORE([AC_CONFIG_MACRO_DIR], [$0])

-

- dnl ensure that when the Automake generated makefile calls aclocal,

- dnl it honours the $ACLOCAL_FLAGS environment variable

- ACLOCAL_AMFLAGS="\${ACLOCAL_FLAGS}"

- if test -n "$ac_macro_dir"; then

- ACLOCAL_AMFLAGS="-I $ac_macro_dir $ACLOCAL_AMFLAGS"

- fi

-

- AC_SUBST([ACLOCAL_AMFLAGS])

-])

-

-AC_DEFUN([MATE_DEBUG_CHECK],

-[

- AC_ARG_ENABLE([debug],

- AC_HELP_STRING([--enable-debug],

- [turn on debugging]),,

- [enable_debug=no])

-

- if test x$enable_debug = xyes ; then

- AC_DEFINE(MATE_ENABLE_DEBUG, 1,

- [Enable additional debugging at the expense of performance and size])

- fi

-])

-

-dnl MATE_MAINTAINER_MODE_DEFINES ()

-dnl define DISABLE_DEPRECATED

-dnl

-AC_DEFUN([MATE_MAINTAINER_MODE_DEFINES],

-[

- AC_REQUIRE([AM_MAINTAINER_MODE])

-

- DISABLE_DEPRECATED=""

- if test $USE_MAINTAINER_MODE = yes; then

- DOMAINS="G ATK PANGO GDK GDK_PIXBUF GTK MATECONF MATECOMPONENT MATECOMPONENT_UI MATE LIBGLADE VTE MATE_VFS WNCK LIBSOUP"

- for DOMAIN in $DOMAINS; do

- DISABLE_DEPRECATED="$DISABLE_DEPRECATED -D${DOMAIN}_DISABLE_DEPRECATED -D${DOMAIN}_DISABLE_SINGLE_INCLUDES"

- done

- fi

-

- AC_SUBST(DISABLE_DEPRECATED)

-])

-

-dnl MATE_COMPILE_WARNINGS

-dnl Turn on many useful compiler warnings

-dnl For now, only works on GCC

-AC_DEFUN([MATE_COMPILE_WARNINGS],[

- dnl ******************************

- dnl More compiler warnings

- dnl ******************************

-

- AC_ARG_ENABLE(compile-warnings,

- AC_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@],

- [Turn on compiler warnings]),,

- [enable_compile_warnings="m4_default([$1],[yes])"])

-

- warnCFLAGS=

- if test "x$GCC" != xyes; then

- enable_compile_warnings=no

- fi

-

- warning_flags=

- realsave_CFLAGS="$CFLAGS"

-

- case "$enable_compile_warnings" in

- no)

- warning_flags=

- ;;

- minimum)

- warning_flags="-Wall"

- ;;

- yes)

- warning_flags="-Wall -Wmissing-prototypes"

- ;;

- maximum|error)

- warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith"

- CFLAGS="$warning_flags $CFLAGS"

- for option in -Wno-sign-compare; do

- SAVE_CFLAGS="$CFLAGS"

- CFLAGS="$CFLAGS $option"

- AC_MSG_CHECKING([whether gcc understands $option])

- AC_TRY_COMPILE([], [],

- has_option=yes,

- has_option=no,)

- CFLAGS="$SAVE_CFLAGS"

- AC_MSG_RESULT($has_option)

- if test $has_option = yes; then

- warning_flags="$warning_flags $option"

- fi

- unset has_option

- unset SAVE_CFLAGS

- done

- unset option

- if test "$enable_compile_warnings" = "error" ; then

- warning_flags="$warning_flags -Werror"

- fi

- ;;

- *)

- AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings)

- ;;

- esac

- CFLAGS="$realsave_CFLAGS"

- AC_MSG_CHECKING(what warning flags to pass to the C compiler)

- AC_MSG_RESULT($warning_flags)

-

- AC_ARG_ENABLE(iso-c,

- AC_HELP_STRING([--enable-iso-c],

- [Try to warn if code is not ISO C ]),,

- [enable_iso_c=no])

-

- AC_MSG_CHECKING(what language compliance flags to pass to the C compiler)

- complCFLAGS=

- if test "x$enable_iso_c" != "xno"; then

- if test "x$GCC" = "xyes"; then

- case " $CFLAGS " in

- *[\ \ ]-ansi[\ \ ]*) ;;

- *) complCFLAGS="$complCFLAGS -ansi" ;;

- esac

- case " $CFLAGS " in

- *[\ \ ]-pedantic[\ \ ]*) ;;

- *) complCFLAGS="$complCFLAGS -pedantic" ;;

- esac

- fi

- fi

- AC_MSG_RESULT($complCFLAGS)

-

- WARN_CFLAGS="$warning_flags $complCFLAGS"

- AC_SUBST(WARN_CFLAGS)

-])

-

-dnl For C++, do basically the same thing.

-

-AC_DEFUN([MATE_CXX_WARNINGS],[

- AC_ARG_ENABLE(cxx-warnings,

- AC_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@]

- [Turn on compiler warnings.]),,

- [enable_cxx_warnings="m4_default([$1],[minimum])"])

-

- AC_MSG_CHECKING(what warning flags to pass to the C++ compiler)

- warnCXXFLAGS=

- if test "x$GXX" != xyes; then

- enable_cxx_warnings=no

- fi

- if test "x$enable_cxx_warnings" != "xno"; then

- if test "x$GXX" = "xyes"; then

- case " $CXXFLAGS " in

- *[\ \ ]-Wall[\ \ ]*) ;;

- *) warnCXXFLAGS="-Wall -Wno-unused" ;;

- esac

-

- ## -W is not all that useful. And it cannot be controlled

- ## with individual -Wno-xxx flags, unlike -Wall

- if test "x$enable_cxx_warnings" = "xyes"; then

- warnCXXFLAGS="$warnCXXFLAGS -Wshadow -Woverloaded-virtual"

- fi

- fi

- fi

- AC_MSG_RESULT($warnCXXFLAGS)

-

- AC_ARG_ENABLE(iso-cxx,

- AC_HELP_STRING([--enable-iso-cxx],

- [Try to warn if code is not ISO C++ ]),,

- [enable_iso_cxx=no])

-

- AC_MSG_CHECKING(what language compliance flags to pass to the C++ compiler)

- complCXXFLAGS=

- if test "x$enable_iso_cxx" != "xno"; then

- if test "x$GXX" = "xyes"; then

- case " $CXXFLAGS " in

- *[\ \ ]-ansi[\ \ ]*) ;;

- *) complCXXFLAGS="$complCXXFLAGS -ansi" ;;

- esac

-

- case " $CXXFLAGS " in

- *[\ \ ]-pedantic[\ \ ]*) ;;

- *) complCXXFLAGS="$complCXXFLAGS -pedantic" ;;

- esac

- fi

- fi

- AC_MSG_RESULT($complCXXFLAGS)

-

- WARN_CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS"

- AC_SUBST(WARN_CXXFLAGS)

-])

-

-dnl AM_MATECONF_SOURCE_2

-dnl Defines MATECONF_SCHEMA_CONFIG_SOURCE which is where you should install schemas

-dnl (i.e. pass to mateconftool-2

-dnl Defines MATECONF_SCHEMA_FILE_DIR which is a filesystem directory where

-dnl you should install foo.schemas files

-dnl

-

-AC_DEFUN([AM_MATECONF_SOURCE_2],

-[

- if test "x$MATECONF_SCHEMA_INSTALL_SOURCE" = "x"; then

- MATECONF_SCHEMA_CONFIG_SOURCE=`mateconftool-2 --get-default-source`

- else

- MATECONF_SCHEMA_CONFIG_SOURCE=$MATECONF_SCHEMA_INSTALL_SOURCE

- fi

-

- AC_ARG_WITH([mateconf-source],

- AC_HELP_STRING([--with-mateconf-source=sourceaddress],

- [Config database for installing schema files.]),

- [MATECONF_SCHEMA_CONFIG_SOURCE="$withval"],)

-

- AC_SUBST(MATECONF_SCHEMA_CONFIG_SOURCE)

- AC_MSG_RESULT([Using config source $MATECONF_SCHEMA_CONFIG_SOURCE for schema installation])

-

- if test "x$MATECONF_SCHEMA_FILE_DIR" = "x"; then

- MATECONF_SCHEMA_FILE_DIR='$(sysconfdir)/mateconf/schemas'

- fi

-

- AC_ARG_WITH([mateconf-schema-file-dir],

- AC_HELP_STRING([--with-mateconf-schema-file-dir=dir],

- [Directory for installing schema files.]),

- [MATECONF_SCHEMA_FILE_DIR="$withval"],)

-

- AC_SUBST(MATECONF_SCHEMA_FILE_DIR)

- AC_MSG_RESULT([Using $MATECONF_SCHEMA_FILE_DIR as install directory for schema files])

-

- AC_ARG_ENABLE(schemas-install,

- AC_HELP_STRING([--disable-schemas-install],

- [Disable the schemas installation]),

- [case ${enableval} in

- yes|no) ;;

- *) AC_MSG_ERROR([bad value ${enableval} for --enable-schemas-install]) ;;

- esac])

- AM_CONDITIONAL([MATECONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no])

-])

-

-# nls.m4 serial 5 (gettext-0.18)

-dnl Copyright (C) 1995-2003, 2005-2006, 2008-2010 Free Software Foundation,

-dnl Inc.

-dnl This file is free software; the Free Software Foundation

-dnl gives unlimited permission to copy and/or distribute it,

-dnl with or without modifications, as long as this notice is preserved.

-dnl

-dnl This file can can be used in projects which are not available under

-dnl the GNU General Public License or the GNU Library General Public

-dnl License but which still want to provide support for the GNU gettext

-dnl functionality.

-dnl Please note that the actual code of the GNU gettext library is covered

-dnl by the GNU Library General Public License, and the rest of the GNU

-dnl gettext package package is covered by the GNU General Public License.

-dnl They are *not* in the public domain.

-

-dnl Authors:

-dnl Ulrich Drepper <[email protected]>, 1995-2000.

-dnl Bruno Haible <[email protected]>, 2000-2003.

-

-AC_PREREQ([2.50])

-

-AC_DEFUN([AM_NLS],

-[

- AC_MSG_CHECKING([whether NLS is requested])

- dnl Default is enabled NLS

- AC_ARG_ENABLE([nls],

- [ --disable-nls do not use Native Language Support],

- USE_NLS=$enableval, USE_NLS=yes)

- AC_MSG_RESULT([$USE_NLS])

- AC_SUBST([USE_NLS])

-])

-

-# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-

-# serial 1 (pkg-config-0.24)

-#

-# Copyright © 2004 Scott James Remnant <[email protected]>.

-#

-# This program is free software; you can redistribute it and/or modify

-# it under the terms of the GNU General Public License as published by

-# the Free Software Foundation; either version 2 of the License, or

-# (at your option) any later version.

-#

-# This program is distributed in the hope that it will be useful, but

-# WITHOUT ANY WARRANTY; without even the implied warranty of

-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU

-# General Public License for more details.

-#

-# You should have received a copy of the GNU General Public License

-# along with this program; if not, write to the Free Software

-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

-#

-# As a special exception to the GNU General Public License, if you

-# distribute this file as part of a program that contains a

-# configuration script generated by Autoconf, you may include it under

-# the same distribution terms that you use for the rest of that program.

-

-# PKG_PROG_PKG_CONFIG([MIN-VERSION])

-# ----------------------------------

-AC_DEFUN([PKG_PROG_PKG_CONFIG],

-[m4_pattern_forbid([^_?PKG_[A-Z_]+$])

-m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])

-m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])

-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])

-AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])

-AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])

-

-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then

- AC_PATH_TOOL([PKG_CONFIG], [pkg-config])

-fi

-if test -n "$PKG_CONFIG"; then

- _pkg_min_version=m4_default([$1], [0.9.0])

- AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])

- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then

- AC_MSG_RESULT([yes])

- else

- AC_MSG_RESULT([no])

- PKG_CONFIG=""

- fi

-fi[]dnl

-])# PKG_PROG_PKG_CONFIG

-

-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])

-#

-# Check to see whether a particular set of modules exists. Similar

-# to PKG_CHECK_MODULES(), but does not set variables or print errors.

-#

-# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])

-# only at the first occurence in configure.ac, so if the first place

-# it's called might be skipped (such as if it is within an "if", you

-# have to call PKG_CHECK_EXISTS manually

-# --------------------------------------------------------------

-AC_DEFUN([PKG_CHECK_EXISTS],

-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl

-if test -n "$PKG_CONFIG" && \

- AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then

- m4_default([$2], [:])

-m4_ifvaln([$3], [else

- $3])dnl

-fi])

-

-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])

-# ---------------------------------------------

-m4_define([_PKG_CONFIG],

-[if test -n "$$1"; then

- pkg_cv_[]$1="$$1"

- elif test -n "$PKG_CONFIG"; then

- PKG_CHECK_EXISTS([$3],

- [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`

- test "x$?" != "x0" && pkg_failed=yes ],

- [pkg_failed=yes])

- else

- pkg_failed=untried

-fi[]dnl

-])# _PKG_CONFIG

-

-# _PKG_SHORT_ERRORS_SUPPORTED

-# -----------------------------

-AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],

-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])

-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then

- _pkg_short_errors_supported=yes

-else

- _pkg_short_errors_supported=no

-fi[]dnl

-])# _PKG_SHORT_ERRORS_SUPPORTED

-

-

-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],

-# [ACTION-IF-NOT-FOUND])

-#

-#

-# Note that if there is a possibility the first call to

-# PKG_CHECK_MODULES might not happen, you should be sure to include an

-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac

-#

-#

-# --------------------------------------------------------------

-AC_DEFUN([PKG_CHECK_MODULES],

-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl

-AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl

-AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl

-

-pkg_failed=no

-AC_MSG_CHECKING([for $1])

-

-_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])

-_PKG_CONFIG([$1][_LIBS], [libs], [$2])

-

-m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS

-and $1[]_LIBS to avoid the need to call pkg-config.

-See the pkg-config man page for more details.])

-

-if test $pkg_failed = yes; then

- AC_MSG_RESULT([no])

- _PKG_SHORT_ERRORS_SUPPORTED

- if test $_pkg_short_errors_supported = yes; then

- $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`

- else

- $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`

- fi

- # Put the nasty error message in config.log where it belongs

- echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD

-

- m4_default([$4], [AC_MSG_ERROR(

-[Package requirements ($2) were not met:

-

-$$1_PKG_ERRORS

-

-Consider adjusting the PKG_CONFIG_PATH environment variable if you

-installed software in a non-standard prefix.

-

-_PKG_TEXT])[]dnl

- ])

-elif test $pkg_failed = untried; then

- AC_MSG_RESULT([no])

- m4_default([$4], [AC_MSG_FAILURE(

-[The pkg-config script could not be found or is too old. Make sure it

-is in your PATH or set the PKG_CONFIG environment variable to the full

-path to pkg-config.

-

-_PKG_TEXT

-

-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl

- ])

-else

- $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS

- $1[]_LIBS=$pkg_cv_[]$1[]_LIBS

- AC_MSG_RESULT([yes])

- $3

-fi[]dnl

-])# PKG_CHECK_MODULES

-

-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# AM_AUTOMAKE_VERSION(VERSION)

-# ----------------------------

-# Automake X.Y traces this macro to ensure aclocal.m4 has been

-# generated from the m4 files accompanying Automake X.Y.

-# (This private macro should not be called outside this file.)

-AC_DEFUN([AM_AUTOMAKE_VERSION],

-[am__api_version='1.11'

-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to

-dnl require some minimum version. Point them to the right macro.

-m4_if([$1], [1.11.1], [],

- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl

-])

-

-# _AM_AUTOCONF_VERSION(VERSION)

-# -----------------------------

-# aclocal traces this macro to find the Autoconf version.

-# This is a private macro too. Using m4_define simplifies

-# the logic in aclocal, which can simply ignore this definition.

-m4_define([_AM_AUTOCONF_VERSION], [])

-

-# AM_SET_CURRENT_AUTOMAKE_VERSION

-# -------------------------------

-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.

-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.

-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],

-[AM_AUTOMAKE_VERSION([1.11.1])dnl

-m4_ifndef([AC_AUTOCONF_VERSION],

- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl

-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])

-

-# AM_AUX_DIR_EXPAND -*- Autoconf -*-

-

-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets

-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to

-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.

-#

-# Of course, Automake must honor this variable whenever it calls a

-# tool from the auxiliary directory. The problem is that $srcdir (and

-# therefore $ac_aux_dir as well) can be either absolute or relative,

-# depending on how configure is run. This is pretty annoying, since

-# it makes $ac_aux_dir quite unusable in subdirectories: in the top

-# source directory, any form will work fine, but in subdirectories a

-# relative path needs to be adjusted first.

-#

-# $ac_aux_dir/missing

-# fails when called from a subdirectory if $ac_aux_dir is relative

-# $top_srcdir/$ac_aux_dir/missing

-# fails if $ac_aux_dir is absolute,

-# fails when called from a subdirectory in a VPATH build with

-# a relative $ac_aux_dir

-#

-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir

-# are both prefixed by $srcdir. In an in-source build this is usually

-# harmless because $srcdir is `.', but things will broke when you

-# start a VPATH build or use an absolute $srcdir.

-#

-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,

-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:

-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`

-# and then we would define $MISSING as

-# MISSING="\${SHELL} $am_aux_dir/missing"

-# This will work as long as MISSING is not called from configure, because

-# unfortunately $(top_srcdir) has no meaning in configure.

-# However there are other variables, like CC, which are often used in

-# configure, and could therefore not use this "fixed" $ac_aux_dir.

-#

-# Another solution, used here, is to always expand $ac_aux_dir to an

-# absolute PATH. The drawback is that using absolute paths prevent a

-# configured tree to be moved without reconfiguration.

-

-AC_DEFUN([AM_AUX_DIR_EXPAND],

-[dnl Rely on autoconf to set up CDPATH properly.

-AC_PREREQ([2.50])dnl

-# expand $ac_aux_dir to an absolute path

-am_aux_dir=`cd $ac_aux_dir && pwd`

-])

-

-# AM_CONDITIONAL -*- Autoconf -*-

-

-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 9

-

-# AM_CONDITIONAL(NAME, SHELL-CONDITION)

-# -------------------------------------

-# Define a conditional.

-AC_DEFUN([AM_CONDITIONAL],

-[AC_PREREQ(2.52)dnl

- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],

- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl

-AC_SUBST([$1_TRUE])dnl

-AC_SUBST([$1_FALSE])dnl

-_AM_SUBST_NOTMAKE([$1_TRUE])dnl

-_AM_SUBST_NOTMAKE([$1_FALSE])dnl

-m4_define([_AM_COND_VALUE_$1], [$2])dnl

-if $2; then

- $1_TRUE=

- $1_FALSE='#'

-else

- $1_TRUE='#'

- $1_FALSE=

-fi

-AC_CONFIG_COMMANDS_PRE(

-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then

- AC_MSG_ERROR([[conditional "$1" was never defined.

-Usually this means the macro was only invoked conditionally.]])

-fi])])

-

-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 10

-

-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be

-# written in clear, in which case automake, when reading aclocal.m4,

-# will think it sees a *use*, and therefore will trigger all it's

-# C support machinery. Also note that it means that autoscan, seeing

-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...

-

-

-# _AM_DEPENDENCIES(NAME)

-# ----------------------

-# See how the compiler implements dependency checking.

-# NAME is "CC", "CXX", "GCJ", or "OBJC".

-# We try a few techniques and use that to set a single cache variable.

-#

-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was

-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular

-# dependency, and given that the user is not expected to run this macro,

-# just rely on AC_PROG_CC.

-AC_DEFUN([_AM_DEPENDENCIES],

-[AC_REQUIRE([AM_SET_DEPDIR])dnl

-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl

-AC_REQUIRE([AM_MAKE_INCLUDE])dnl

-AC_REQUIRE([AM_DEP_TRACK])dnl

-

-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],

- [$1], CXX, [depcc="$CXX" am_compiler_list=],

- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],

- [$1], UPC, [depcc="$UPC" am_compiler_list=],

- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],

- [depcc="$$1" am_compiler_list=])

-

-AC_CACHE_CHECK([dependency style of $depcc],

- [am_cv_$1_dependencies_compiler_type],

-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then

- # We make a subdir and do the tests there. Otherwise we can end up

- # making bogus files that we don't know about and never remove. For

- # instance it was reported that on HP-UX the gcc test will end up

- # making a dummy file named `D' -- because `-MD' means `put the output

- # in D'.

- mkdir conftest.dir

- # Copy depcomp to subdir because otherwise we won't find it if we're

- # using a relative directory.

- cp "$am_depcomp" conftest.dir

- cd conftest.dir

- # We will build objects and dependencies in a subdirectory because

- # it helps to detect inapplicable dependency modes. For instance

- # both Tru64's cc and ICC support -MD to output dependencies as a

- # side effect of compilation, but ICC will put the dependencies in

- # the current directory while Tru64 will put them in the object

- # directory.

- mkdir sub

-

- am_cv_$1_dependencies_compiler_type=none

- if test "$am_compiler_list" = ""; then

- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`

- fi

- am__universal=false

- m4_case([$1], [CC],

- [case " $depcc " in #(

- *\ -arch\ *\ -arch\ *) am__universal=true ;;

- esac],

- [CXX],

- [case " $depcc " in #(

- *\ -arch\ *\ -arch\ *) am__universal=true ;;

- esac])

-

- for depmode in $am_compiler_list; do

- # Setup a source with many dependencies, because some compilers

- # like to wrap large dependency lists on column 80 (with \), and

- # we should not choose a depcomp mode which is confused by this.

- #

- # We need to recreate these files for each test, as the compiler may

- # overwrite some of them when testing with obscure command lines.

- # This happens at least with the AIX C compiler.

- : > sub/conftest.c

- for i in 1 2 3 4 5 6; do

- echo '#include "conftst'$i'.h"' >> sub/conftest.c

- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with

- # Solaris 8's {/usr,}/bin/sh.

- touch sub/conftst$i.h

- done

- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf

-

- # We check with `-c' and `-o' for the sake of the "dashmstdout"

- # mode. It turns out that the SunPro C++ compiler does not properly

- # handle `-M -o', and we need to detect this. Also, some Intel

- # versions had trouble with output in subdirs

- am__obj=sub/conftest.${OBJEXT-o}

- am__minus_obj="-o $am__obj"

- case $depmode in

- gcc)

- # This depmode causes a compiler race in universal mode.

- test "$am__universal" = false || continue

- ;;

- nosideeffect)

- # after this tag, mechanisms are not by side-effect, so they'll

- # only be used when explicitly requested

- if test "x$enable_dependency_tracking" = xyes; then

- continue

- else

- break

- fi

- ;;

- msvisualcpp | msvcmsys)

- # This compiler won't grok `-c -o', but also, the minuso test has

- # not run yet. These depmodes are late enough in the game, and

- # so weak that their functioning should not be impacted.

- am__obj=conftest.${OBJEXT-o}

- am__minus_obj=

- ;;

- none) break ;;

- esac

- if depmode=$depmode \

- source=sub/conftest.c object=$am__obj \

- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \

- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \

- >/dev/null 2>conftest.err &&

- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&

- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&

- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&

- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then

- # icc doesn't choke on unknown options, it will just issue warnings

- # or remarks (even with -Werror). So we grep stderr for any message

- # that says an option was ignored or not supported.

- # When given -MP, icc 7.0 and 7.1 complain thusly:

- # icc: Command line warning: ignoring option '-M'; no argument required

- # The diagnosis changed in icc 8.0:

- # icc: Command line remark: option '-MP' not supported

- if (grep 'ignoring option' conftest.err ||

- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else

- am_cv_$1_dependencies_compiler_type=$depmode

- break

- fi

- fi

- done

-

- cd ..

- rm -rf conftest.dir

-else

- am_cv_$1_dependencies_compiler_type=none

-fi

-])

-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])

-AM_CONDITIONAL([am__fastdep$1], [

- test "x$enable_dependency_tracking" != xno \

- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])

-])

-

-

-# AM_SET_DEPDIR

-# -------------

-# Choose a directory name for dependency files.

-# This macro is AC_REQUIREd in _AM_DEPENDENCIES

-AC_DEFUN([AM_SET_DEPDIR],

-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl

-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl

-])

-

-

-# AM_DEP_TRACK

-# ------------

-AC_DEFUN([AM_DEP_TRACK],

-[AC_ARG_ENABLE(dependency-tracking,

-[ --disable-dependency-tracking speeds up one-time build

- --enable-dependency-tracking do not reject slow dependency extractors])

-if test "x$enable_dependency_tracking" != xno; then

- am_depcomp="$ac_aux_dir/depcomp"

- AMDEPBACKSLASH='\'

-fi

-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])

-AC_SUBST([AMDEPBACKSLASH])dnl

-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl

-])

-

-# Generate code to set up dependency tracking. -*- Autoconf -*-

-

-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-#serial 5

-

-# _AM_OUTPUT_DEPENDENCY_COMMANDS

-# ------------------------------

-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],

-[{

- # Autoconf 2.62 quotes --file arguments for eval, but not when files

- # are listed without --file. Let's play safe and only enable the eval

- # if we detect the quoting.

- case $CONFIG_FILES in

- *\'*) eval set x "$CONFIG_FILES" ;;

- *) set x $CONFIG_FILES ;;

- esac

- shift

- for mf

- do

- # Strip MF so we end up with the name of the file.

- mf=`echo "$mf" | sed -e 's/:.*$//'`

- # Check whether this is an Automake generated Makefile or not.

- # We used to match only the files named `Makefile.in', but

- # some people rename them; so instead we look at the file content.

- # Grep'ing the first line is not enough: some people post-process

- # each Makefile.in and add a new line on top of each file to say so.

- # Grep'ing the whole file is not good either: AIX grep has a line

- # limit of 2048, but all sed's we know have understand at least 4000.

- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then

- dirpart=`AS_DIRNAME("$mf")`

- else

- continue

- fi

- # Extract the definition of DEPDIR, am__include, and am__quote

- # from the Makefile without running `make'.

- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`

- test -z "$DEPDIR" && continue

- am__include=`sed -n 's/^am__include = //p' < "$mf"`

- test -z "am__include" && continue

- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`

- # When using ansi2knr, U may be empty or an underscore; expand it

- U=`sed -n 's/^U = //p' < "$mf"`

- # Find all dependency output files, they are included files with

- # $(DEPDIR) in their names. We invoke sed twice because it is the

- # simplest approach to changing $(DEPDIR) to its actual value in the

- # expansion.

- for file in `sed -n "

- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \

- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do

- # Make sure the directory exists.

- test -f "$dirpart/$file" && continue

- fdir=`AS_DIRNAME(["$file"])`

- AS_MKDIR_P([$dirpart/$fdir])

- # echo "creating $dirpart/$file"

- echo '# dummy' > "$dirpart/$file"

- done

- done

-}

-])# _AM_OUTPUT_DEPENDENCY_COMMANDS

-

-

-# AM_OUTPUT_DEPENDENCY_COMMANDS

-# -----------------------------

-# This macro should only be invoked once -- use via AC_REQUIRE.

-#

-# This code is only required when automatic dependency tracking

-# is enabled. FIXME. This creates each `.P' file that we will

-# need in order to bootstrap the dependency handling code.

-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],

-[AC_CONFIG_COMMANDS([depfiles],

- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],

- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])

-])

-

-# Do all the work for Automake. -*- Autoconf -*-

-

-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,

-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 16

-

-# This macro actually does too much. Some checks are only needed if

-# your package does certain things. But this isn't really a big deal.

-

-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])

-# AM_INIT_AUTOMAKE([OPTIONS])

-# -----------------------------------------------

-# The call with PACKAGE and VERSION arguments is the old style

-# call (pre autoconf-2.50), which is being phased out. PACKAGE

-# and VERSION should now be passed to AC_INIT and removed from

-# the call to AM_INIT_AUTOMAKE.

-# We support both call styles for the transition. After

-# the next Automake release, Autoconf can make the AC_INIT

-# arguments mandatory, and then we can depend on a new Autoconf

-# release and drop the old call support.

-AC_DEFUN([AM_INIT_AUTOMAKE],

-[AC_PREREQ([2.62])dnl

-dnl Autoconf wants to disallow AM_ names. We explicitly allow

-dnl the ones we care about.

-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl

-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl

-AC_REQUIRE([AC_PROG_INSTALL])dnl

-if test "`cd $srcdir && pwd`" != "`pwd`"; then

- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output

- # is not polluted with repeated "-I."

- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl

- # test to see if srcdir already configured

- if test -f $srcdir/config.status; then

- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])

- fi

-fi

-

-# test whether we have cygpath

-if test -z "$CYGPATH_W"; then

- if (cygpath --version) >/dev/null 2>/dev/null; then

- CYGPATH_W='cygpath -w'

- else

- CYGPATH_W=echo

- fi

-fi

-AC_SUBST([CYGPATH_W])

-

-# Define the identity of the package.

-dnl Distinguish between old-style and new-style calls.

-m4_ifval([$2],

-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl

- AC_SUBST([PACKAGE], [$1])dnl

- AC_SUBST([VERSION], [$2])],

-[_AM_SET_OPTIONS([$1])dnl

-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.

-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,

- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl

- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl

- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl

-

-_AM_IF_OPTION([no-define],,

-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])

- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl

-

-# Some tools Automake needs.

-AC_REQUIRE([AM_SANITY_CHECK])dnl

-AC_REQUIRE([AC_ARG_PROGRAM])dnl

-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})

-AM_MISSING_PROG(AUTOCONF, autoconf)

-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})

-AM_MISSING_PROG(AUTOHEADER, autoheader)

-AM_MISSING_PROG(MAKEINFO, makeinfo)

-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl

-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl

-AC_REQUIRE([AM_PROG_MKDIR_P])dnl

-# We need awk for the "check" target. The system "awk" is bad on

-# some platforms.

-AC_REQUIRE([AC_PROG_AWK])dnl

-AC_REQUIRE([AC_PROG_MAKE_SET])dnl

-AC_REQUIRE([AM_SET_LEADING_DOT])dnl

-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],

- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],

- [_AM_PROG_TAR([v7])])])

-_AM_IF_OPTION([no-dependencies],,

-[AC_PROVIDE_IFELSE([AC_PROG_CC],

- [_AM_DEPENDENCIES(CC)],

- [define([AC_PROG_CC],

- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl

-AC_PROVIDE_IFELSE([AC_PROG_CXX],

- [_AM_DEPENDENCIES(CXX)],

- [define([AC_PROG_CXX],

- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl

-AC_PROVIDE_IFELSE([AC_PROG_OBJC],

- [_AM_DEPENDENCIES(OBJC)],

- [define([AC_PROG_OBJC],

- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl

-])

-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl

-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the

-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro

-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.

-AC_CONFIG_COMMANDS_PRE(dnl

-[m4_provide_if([_AM_COMPILER_EXEEXT],

- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl

-])

-

-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not

-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further

-dnl mangled by Autoconf and run in a shell conditional statement.

-m4_define([_AC_COMPILER_EXEEXT],

-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])

-

-

-# When config.status generates a header, we must update the stamp-h file.

-# This file resides in the same directory as the config header

-# that is generated. The stamp files are numbered to have different names.

-

-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the

-# loop where config.status creates the headers, so we can generate

-# our stamp files there.

-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],

-[# Compute $1's index in $config_headers.

-_am_arg=$1

-_am_stamp_count=1

-for _am_header in $config_headers :; do

- case $_am_header in

- $_am_arg | $_am_arg:* )

- break ;;

- * )

- _am_stamp_count=`expr $_am_stamp_count + 1` ;;

- esac

-done

-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])

-

-# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# AM_PROG_INSTALL_SH

-# ------------------

-# Define $install_sh.

-AC_DEFUN([AM_PROG_INSTALL_SH],

-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl

-if test x"${install_sh}" != xset; then

- case $am_aux_dir in

- *\ * | *\ *)

- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;

- *)

- install_sh="\${SHELL} $am_aux_dir/install-sh"

- esac

-fi

-AC_SUBST(install_sh)])

-

-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 2

-

-# Check whether the underlying file-system supports filenames

-# with a leading dot. For instance MS-DOS doesn't.

-AC_DEFUN([AM_SET_LEADING_DOT],

-[rm -rf .tst 2>/dev/null

-mkdir .tst 2>/dev/null

-if test -d .tst; then

- am__leading_dot=.

-else

- am__leading_dot=_

-fi

-rmdir .tst 2>/dev/null

-AC_SUBST([am__leading_dot])])

-

-# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-

-# From Jim Meyering

-

-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 5

-

-# AM_MAINTAINER_MODE([DEFAULT-MODE])

-# ----------------------------------

-# Control maintainer-specific portions of Makefiles.

-# Default is to disable them, unless `enable' is passed literally.

-# For symmetry, `disable' may be passed as well. Anyway, the user

-# can override the default with the --enable/--disable switch.

-AC_DEFUN([AM_MAINTAINER_MODE],

-[m4_case(m4_default([$1], [disable]),

- [enable], [m4_define([am_maintainer_other], [disable])],

- [disable], [m4_define([am_maintainer_other], [enable])],

- [m4_define([am_maintainer_other], [enable])

- m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])

-AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])

- dnl maintainer-mode's default is 'disable' unless 'enable' is passed

- AC_ARG_ENABLE([maintainer-mode],

-[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful

- (and sometimes confusing) to the casual installer],

- [USE_MAINTAINER_MODE=$enableval],

- [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))

- AC_MSG_RESULT([$USE_MAINTAINER_MODE])

- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])

- MAINT=$MAINTAINER_MODE_TRUE

- AC_SUBST([MAINT])dnl

-]

-)

-

-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])

-

-# Check to see how 'make' treats includes. -*- Autoconf -*-

-

-# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 4

-

-# AM_MAKE_INCLUDE()

-# -----------------

-# Check to see how make treats includes.

-AC_DEFUN([AM_MAKE_INCLUDE],

-[am_make=${MAKE-make}

-cat > confinc << 'END'

-am__doit:

- @echo this is the am__doit target

-.PHONY: am__doit

-END

-# If we don't find an include directive, just comment out the code.

-AC_MSG_CHECKING([for style of include used by $am_make])

-am__include="#"

-am__quote=

-_am_result=none

-# First try GNU make style include.

-echo "include confinc" > confmf

-# Ignore all kinds of additional output from `make'.

-case `$am_make -s -f confmf 2> /dev/null` in #(

-*the\ am__doit\ target*)

- am__include=include

- am__quote=

- _am_result=GNU

- ;;

-esac

-# Now try BSD make style include.

-if test "$am__include" = "#"; then

- echo '.include "confinc"' > confmf

- case `$am_make -s -f confmf 2> /dev/null` in #(

- *the\ am__doit\ target*)

- am__include=.include

- am__quote="\""

- _am_result=BSD

- ;;

- esac

-fi

-AC_SUBST([am__include])

-AC_SUBST([am__quote])

-AC_MSG_RESULT([$_am_result])

-rm -f confinc confmf

-])

-

-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-

-

-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 6

-

-# AM_MISSING_PROG(NAME, PROGRAM)

-# ------------------------------

-AC_DEFUN([AM_MISSING_PROG],

-[AC_REQUIRE([AM_MISSING_HAS_RUN])

-$1=${$1-"${am_missing_run}$2"}

-AC_SUBST($1)])

-

-

-# AM_MISSING_HAS_RUN

-# ------------------

-# Define MISSING if not defined so far and test if it supports --run.

-# If it does, set am_missing_run to use it, otherwise, to nothing.

-AC_DEFUN([AM_MISSING_HAS_RUN],

-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl

-AC_REQUIRE_AUX_FILE([missing])dnl

-if test x"${MISSING+set}" != xset; then

- case $am_aux_dir in

- *\ * | *\ *)

- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;

- *)

- MISSING="\${SHELL} $am_aux_dir/missing" ;;

- esac

-fi

-# Use eval to expand $SHELL

-if eval "$MISSING --run true"; then

- am_missing_run="$MISSING --run "

-else

- am_missing_run=

- AC_MSG_WARN([`missing' script is too old or missing])

-fi

-])

-

-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# AM_PROG_MKDIR_P

-# ---------------

-# Check for `mkdir -p'.

-AC_DEFUN([AM_PROG_MKDIR_P],

-[AC_PREREQ([2.60])dnl

-AC_REQUIRE([AC_PROG_MKDIR_P])dnl

-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,

-dnl while keeping a definition of mkdir_p for backward compatibility.

-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.

-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of

-dnl Makefile.ins that do not define MKDIR_P, so we do our own

-dnl adjustment using top_builddir (which is defined more often than

-dnl MKDIR_P).

-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl

-case $mkdir_p in

- [[\\/$]]* | ?:[[\\/]]*) ;;

- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;

-esac

-])

-

-# Helper functions for option handling. -*- Autoconf -*-

-

-# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 4

-

-# _AM_MANGLE_OPTION(NAME)

-# -----------------------

-AC_DEFUN([_AM_MANGLE_OPTION],

-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])

-

-# _AM_SET_OPTION(NAME)

-# ------------------------------

-# Set option NAME. Presently that only means defining a flag for this option.

-AC_DEFUN([_AM_SET_OPTION],

-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])

-

-# _AM_SET_OPTIONS(OPTIONS)

-# ----------------------------------

-# OPTIONS is a space-separated list of Automake options.

-AC_DEFUN([_AM_SET_OPTIONS],

-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])

-

-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])

-# -------------------------------------------

-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.

-AC_DEFUN([_AM_IF_OPTION],

-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])

-

-# Check to make sure that the build environment is sane. -*- Autoconf -*-

-

-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 5

-

-# AM_SANITY_CHECK

-# ---------------

-AC_DEFUN([AM_SANITY_CHECK],

-[AC_MSG_CHECKING([whether build environment is sane])

-# Just in case

-sleep 1

-echo timestamp > conftest.file

-# Reject unsafe characters in $srcdir or the absolute working directory

-# name. Accept space and tab only in the latter.

-am_lf='

-'

-case `pwd` in

- *[[\\\"\#\$\&\'\`$am_lf]]*)

- AC_MSG_ERROR([unsafe absolute working directory name]);;

-esac

-case $srcdir in

- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)

- AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;

-esac

-

-# Do `set' in a subshell so we don't clobber the current shell's

-# arguments. Must try -L first in case configure is actually a

-# symlink; some systems play weird games with the mod time of symlinks

-# (eg FreeBSD returns the mod time of the symlink's containing

-# directory).

-if (

- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`

- if test "$[*]" = "X"; then

- # -L didn't work.

- set X `ls -t "$srcdir/configure" conftest.file`

- fi

- rm -f conftest.file

- if test "$[*]" != "X $srcdir/configure conftest.file" \

- && test "$[*]" != "X conftest.file $srcdir/configure"; then

-

- # If neither matched, then we have a broken ls. This can happen

- # if, for instance, CONFIG_SHELL is bash and it inherits a

- # broken ls alias from the environment. This has actually

- # happened. Such a system could not be considered "sane".

- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken

-alias in your environment])

- fi

-

- test "$[2]" = conftest.file

- )

-then

- # Ok.

- :

-else

- AC_MSG_ERROR([newly created file is older than distributed files!

-Check your system clock])

-fi

-AC_MSG_RESULT(yes)])

-

-# Copyright (C) 2009 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 1

-

-# AM_SILENT_RULES([DEFAULT])

-# --------------------------

-# Enable less verbose build rules; with the default set to DEFAULT

-# (`yes' being less verbose, `no' or empty being verbose).

-AC_DEFUN([AM_SILENT_RULES],

-[AC_ARG_ENABLE([silent-rules],

-[ --enable-silent-rules less verbose build output (undo: `make V=1')

- --disable-silent-rules verbose build output (undo: `make V=0')])

-case $enable_silent_rules in

-yes) AM_DEFAULT_VERBOSITY=0;;

-no) AM_DEFAULT_VERBOSITY=1;;

-*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;

-esac

-AC_SUBST([AM_DEFAULT_VERBOSITY])dnl

-AM_BACKSLASH='\'

-AC_SUBST([AM_BACKSLASH])dnl

-_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl

-])

-

-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# AM_PROG_INSTALL_STRIP

-# ---------------------

-# One issue with vendor `install' (even GNU) is that you can't

-# specify the program used to strip binaries. This is especially

-# annoying in cross-compiling environments, where the build's strip

-# is unlikely to handle the host's binaries.

-# Fortunately install-sh will honor a STRIPPROG variable, so we

-# always use install-sh in `make install-strip', and initialize

-# STRIPPROG with the value of the STRIP variable (set by the user).

-AC_DEFUN([AM_PROG_INSTALL_STRIP],

-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl

-# Installed binaries are usually stripped using `strip' when the user

-# run `make install-strip'. However `strip' might not be the right

-# tool to use in cross-compilation environments, therefore Automake

-# will honor the `STRIP' environment variable to overrule this program.

-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.

-if test "$cross_compiling" != no; then

- AC_CHECK_TOOL([STRIP], [strip], :)

-fi

-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"

-AC_SUBST([INSTALL_STRIP_PROGRAM])])

-

-# Copyright (C) 2006, 2008 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 2

-

-# _AM_SUBST_NOTMAKE(VARIABLE)

-# ---------------------------

-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.

-# This macro is traced by Automake.

-AC_DEFUN([_AM_SUBST_NOTMAKE])

-

-# AM_SUBST_NOTMAKE(VARIABLE)

-# ---------------------------

-# Public sister of _AM_SUBST_NOTMAKE.

-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])

-

-# Check how to create a tarball. -*- Autoconf -*-

-

-# Copyright (C) 2004, 2005 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 2

-

-# _AM_PROG_TAR(FORMAT)

-# --------------------

-# Check how to create a tarball in format FORMAT.

-# FORMAT should be one of `v7', `ustar', or `pax'.

-#

-# Substitute a variable $(am__tar) that is a command

-# writing to stdout a FORMAT-tarball containing the directory

-# $tardir.

-# tardir=directory && $(am__tar) > result.tar

-#

-# Substitute a variable $(am__untar) that extract such

-# a tarball read from stdin.

-# $(am__untar) < result.tar

-AC_DEFUN([_AM_PROG_TAR],

-[# Always define AMTAR for backward compatibility.

-AM_MISSING_PROG([AMTAR], [tar])

-m4_if([$1], [v7],

- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],

- [m4_case([$1], [ustar],, [pax],,

- [m4_fatal([Unknown tar format])])

-AC_MSG_CHECKING([how to create a $1 tar archive])

-# Loop over all known methods to create a tar archive until one works.

-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'

-_am_tools=${am_cv_prog_tar_$1-$_am_tools}

-# Do not fold the above two line into one, because Tru64 sh and

-# Solaris sh will not grok spaces in the rhs of `-'.

-for _am_tool in $_am_tools

-do

- case $_am_tool in

- gnutar)

- for _am_tar in tar gnutar gtar;

- do

- AM_RUN_LOG([$_am_tar --version]) && break

- done

- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'

- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'

- am__untar="$_am_tar -xf -"

- ;;

- plaintar)

- # Must skip GNU tar: if it does not support --format= it doesn't create

- # ustar tarball either.

- (tar --version) >/dev/null 2>&1 && continue

- am__tar='tar chf - "$$tardir"'

- am__tar_='tar chf - "$tardir"'

- am__untar='tar xf -'

- ;;

- pax)

- am__tar='pax -L -x $1 -w "$$tardir"'

- am__tar_='pax -L -x $1 -w "$tardir"'

- am__untar='pax -r'

- ;;

- cpio)

- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'

- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'

- am__untar='cpio -i -H $1 -d'

- ;;

- none)

- am__tar=false

- am__tar_=false

- am__untar=false

- ;;

- esac

-

- # If the value was cached, stop now. We just wanted to have am__tar

- # and am__untar set.

- test -n "${am_cv_prog_tar_$1}" && break

-

- # tar/untar a dummy directory, and stop if the command works

- rm -rf conftest.dir

- mkdir conftest.dir

- echo GrepMe > conftest.dir/file

- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])

- rm -rf conftest.dir

- if test -s conftest.tar; then

- AM_RUN_LOG([$am__untar <conftest.tar])

- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break

- fi

-done

-rm -rf conftest.dir

-

-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])

-AC_MSG_RESULT([$am_cv_prog_tar_$1])])

-AC_SUBST([am__tar])

-AC_SUBST([am__untar])

-]) # _AM_PROG_TAR

-

-m4_include([m4/intltool.m4])

-m4_include([m4/libtool.m4])

-m4_include([m4/ltoptions.m4])

-m4_include([m4/ltsugar.m4])

-m4_include([m4/ltversion.m4])

-m4_include([m4/lt~obsolete.m4])

-# Makefile.in generated by automake 1.11.1 from Makefile.am.

-# @configure_input@

-

-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,

-# Inc.

-# This Makefile.in is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# This program is distributed in the hope that it will be useful,

-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

-# PARTICULAR PURPOSE.

-

-@SET_MAKE@

-

-VPATH = @srcdir@

-pkgdatadir = $(datadir)/@PACKAGE@

-pkgincludedir = $(includedir)/@PACKAGE@

-pkglibdir = $(libdir)/@PACKAGE@

-pkglibexecdir = $(libexecdir)/@PACKAGE@

-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

-install_sh_DATA = $(install_sh) -c -m 644

-install_sh_PROGRAM = $(install_sh) -c

-install_sh_SCRIPT = $(install_sh) -c

-INSTALL_HEADER = $(INSTALL_DATA)

-transform = $(program_transform_name)

-NORMAL_INSTALL = :

-PRE_INSTALL = :

-POST_INSTALL = :

-NORMAL_UNINSTALL = :

-PRE_UNINSTALL = :

-POST_UNINSTALL = :

-build_triplet = @build@

-host_triplet = @host@

-bin_PROGRAMS = mate-session-properties$(EXEEXT)

-subdir = capplet

-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in

-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

-am__aclocal_m4_deps = $(top_srcdir)/m4/intltool.m4 \

- $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \

- $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \

- $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac

-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

- $(ACLOCAL_M4)

-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs

-CONFIG_HEADER = $(top_builddir)/config.h

-CONFIG_CLEAN_FILES =

-CONFIG_CLEAN_VPATH_FILES =

-am__installdirs = "$(DESTDIR)$(bindir)"

-PROGRAMS = $(bin_PROGRAMS)

-am_mate_session_properties_OBJECTS = main.$(OBJEXT) \

- gsm-properties-dialog.$(OBJEXT) gsm-app-dialog.$(OBJEXT) \

- gsp-app.$(OBJEXT) gsp-app-manager.$(OBJEXT) \

- gsp-keyfile.$(OBJEXT)

-mate_session_properties_OBJECTS = \

- $(am_mate_session_properties_OBJECTS)

-am__DEPENDENCIES_1 =

-mate_session_properties_DEPENDENCIES = $(am__DEPENDENCIES_1) \

- $(top_builddir)/egg/libeggdesktopfile.la \

- $(top_builddir)/mate-session/libgsmutil.la \

- $(am__DEPENDENCIES_1)

-AM_V_lt = $(am__v_lt_$(V))

-am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))

-am__v_lt_0 = --silent

-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)

-depcomp = $(SHELL) $(top_srcdir)/depcomp

-am__depfiles_maybe = depfiles

-am__mv = mv -f

-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \

- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)

-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \

- $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \

- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \

- $(AM_CFLAGS) $(CFLAGS)

-AM_V_CC = $(am__v_CC_$(V))

-am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))

-am__v_CC_0 = @echo " CC " $@;

-AM_V_at = $(am__v_at_$(V))

-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))

-am__v_at_0 = @

-CCLD = $(CC)

-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \

- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \

- $(AM_LDFLAGS) $(LDFLAGS) -o $@

-AM_V_CCLD = $(am__v_CCLD_$(V))

-am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))

-am__v_CCLD_0 = @echo " CCLD " $@;

-AM_V_GEN = $(am__v_GEN_$(V))

-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))

-am__v_GEN_0 = @echo " GEN " $@;

-SOURCES = $(mate_session_properties_SOURCES)

-DIST_SOURCES = $(mate_session_properties_SOURCES)

-ETAGS = etags

-CTAGS = ctags

-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

-ACLOCAL = @ACLOCAL@

-ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@

-ALL_LINGUAS = @ALL_LINGUAS@

-AMTAR = @AMTAR@

-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@

-AR = @AR@

-AUTOCONF = @AUTOCONF@

-AUTOHEADER = @AUTOHEADER@

-AUTOMAKE = @AUTOMAKE@

-AWK = @AWK@

-CATALOGS = @CATALOGS@

-CATOBJEXT = @CATOBJEXT@

-CC = @CC@

-CCDEPMODE = @CCDEPMODE@

-CFLAGS = @CFLAGS@

-CPP = @CPP@

-CPPFLAGS = @CPPFLAGS@

-CYGPATH_W = @CYGPATH_W@

-DATADIRNAME = @DATADIRNAME@

-DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@

-DBUS_GLIB_LIBS = @DBUS_GLIB_LIBS@

-DEFAULT_WM = @DEFAULT_WM@

-DEFS = @DEFS@

-DEPDIR = @DEPDIR@

-DISABLE_DEPRECATED = @DISABLE_DEPRECATED@

-DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@

-DLLTOOL = @DLLTOOL@

-DSYMUTIL = @DSYMUTIL@

-DUMPBIN = @DUMPBIN@

-ECHO_C = @ECHO_C@

-ECHO_N = @ECHO_N@

-ECHO_T = @ECHO_T@

-EGG_SMCLIENT_CFLAGS = @EGG_SMCLIENT_CFLAGS@

-EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@

-EGREP = @EGREP@

-EXECINFO_LIBS = @EXECINFO_LIBS@

-EXEEXT = @EXEEXT@

-FGREP = @FGREP@

-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@

-GLIB_GENMARSHAL = @GLIB_GENMARSHAL@

-GMOFILES = @GMOFILES@

-GMSGFMT = @GMSGFMT@

-GREP = @GREP@

-HAVE_XRENDER = @HAVE_XRENDER@

-HAVE_XTEST = @HAVE_XTEST@

-ICE_CFLAGS = @ICE_CFLAGS@

-ICE_LIBS = @ICE_LIBS@

-INSTALL = @INSTALL@

-INSTALL_DATA = @INSTALL_DATA@

-INSTALL_PROGRAM = @INSTALL_PROGRAM@

-INSTALL_SCRIPT = @INSTALL_SCRIPT@

-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

-INSTOBJEXT = @INSTOBJEXT@

-INTLLIBS = @INTLLIBS@

-INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@

-INTLTOOL_MERGE = @INTLTOOL_MERGE@

-INTLTOOL_PERL = @INTLTOOL_PERL@

-INTLTOOL_UPDATE = @INTLTOOL_UPDATE@

-LD = @LD@

-LDFLAGS = @LDFLAGS@

-LIBOBJS = @LIBOBJS@

-LIBS = @LIBS@

-LIBTOOL = @LIBTOOL@

-LIPO = @LIPO@

-LN_S = @LN_S@

-LTLIBOBJS = @LTLIBOBJS@

-MAINT = @MAINT@

-MAKEINFO = @MAKEINFO@

-MANIFEST_TOOL = @MANIFEST_TOOL@

-MATECONFTOOL = @MATECONFTOOL@

-MATECONF_CFLAGS = @MATECONF_CFLAGS@

-MATECONF_LIBS = @MATECONF_LIBS@

-MATECONF_SANITY_CHECK = @MATECONF_SANITY_CHECK@

-MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@

-MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@

-MATE_SESSION_CFLAGS = @MATE_SESSION_CFLAGS@

-MATE_SESSION_LIBS = @MATE_SESSION_LIBS@

-MKDIR_P = @MKDIR_P@

-MKINSTALLDIRS = @MKINSTALLDIRS@

-MSGFMT = @MSGFMT@

-MSGFMT_OPTS = @MSGFMT_OPTS@

-MSGMERGE = @MSGMERGE@

-NM = @NM@

-NMEDIT = @NMEDIT@

-OBJDUMP = @OBJDUMP@

-OBJEXT = @OBJEXT@

-OTOOL = @OTOOL@

-OTOOL64 = @OTOOL64@

-PACKAGE = @PACKAGE@

-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

-PACKAGE_NAME = @PACKAGE_NAME@

-PACKAGE_STRING = @PACKAGE_STRING@

-PACKAGE_TARNAME = @PACKAGE_TARNAME@

-PACKAGE_URL = @PACKAGE_URL@

-PACKAGE_VERSION = @PACKAGE_VERSION@

-PATH_SEPARATOR = @PATH_SEPARATOR@

-PERL = @PERL@

-PKG_CONFIG = @PKG_CONFIG@

-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@

-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@

-POFILES = @POFILES@

-POSUB = @POSUB@

-PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@

-PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@

-RANLIB = @RANLIB@

-REBUILD = @REBUILD@

-SED = @SED@

-SESSION_PROPERTIES_CFLAGS = @SESSION_PROPERTIES_CFLAGS@

-SESSION_PROPERTIES_LIBS = @SESSION_PROPERTIES_LIBS@

-SET_MAKE = @SET_MAKE@

-SHELL = @SHELL@

-SM_CFLAGS = @SM_CFLAGS@

-SM_LIBS = @SM_LIBS@

-STRIP = @STRIP@

-USE_NLS = @USE_NLS@

-VERSION = @VERSION@

-WARN_CFLAGS = @WARN_CFLAGS@

-XEXT_CFLAGS = @XEXT_CFLAGS@

-XEXT_LIBS = @XEXT_LIBS@

-XGETTEXT = @XGETTEXT@

-XMKMF = @XMKMF@

-XMLTO = @XMLTO@

-XRENDER_CFLAGS = @XRENDER_CFLAGS@

-XRENDER_LIBS = @XRENDER_LIBS@

-XSLTPROC = @XSLTPROC@

-XTEST_CFLAGS = @XTEST_CFLAGS@

-XTEST_LIBS = @XTEST_LIBS@

-X_CFLAGS = @X_CFLAGS@

-X_EXTRA_LIBS = @X_EXTRA_LIBS@

-X_LIBS = @X_LIBS@

-X_PRE_LIBS = @X_PRE_LIBS@

-abs_builddir = @abs_builddir@

-abs_srcdir = @abs_srcdir@

-abs_top_builddir = @abs_top_builddir@

-abs_top_srcdir = @abs_top_srcdir@

-ac_ct_AR = @ac_ct_AR@

-ac_ct_CC = @ac_ct_CC@

-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@

-am__include = @am__include@

-am__leading_dot = @am__leading_dot@

-am__quote = @am__quote@

-am__tar = @am__tar@

-am__untar = @am__untar@

-bindir = @bindir@

-build = @build@

-build_alias = @build_alias@

-build_cpu = @build_cpu@

-build_os = @build_os@

-build_vendor = @build_vendor@

-builddir = @builddir@

-datadir = @datadir@

-datarootdir = @datarootdir@

-docdir = @docdir@

-dvidir = @dvidir@

-exec_prefix = @exec_prefix@

-host = @host@

-host_alias = @host_alias@

-host_cpu = @host_cpu@

-host_os = @host_os@

-host_vendor = @host_vendor@

-htmldir = @htmldir@

-includedir = @includedir@

-infodir = @infodir@

-install_sh = @install_sh@

-libdir = @libdir@

-libexecdir = @libexecdir@

-localedir = @localedir@

-localstatedir = @localstatedir@

-mandir = @mandir@

-mkdir_p = @mkdir_p@

-oldincludedir = @oldincludedir@

-pdfdir = @pdfdir@

-prefix = @prefix@

-program_transform_name = @program_transform_name@

-psdir = @psdir@

-sbindir = @sbindir@

-sharedstatedir = @sharedstatedir@

-srcdir = @srcdir@

-sysconfdir = @sysconfdir@

-target_alias = @target_alias@

-top_build_prefix = @top_build_prefix@

-top_builddir = @top_builddir@

-top_srcdir = @top_srcdir@

-AM_CPPFLAGS = \

- $(SESSION_PROPERTIES_CFLAGS) \

- $(MATECONF_CFLAGS) \

- -I$(top_srcdir)/egg \

- -I$(top_srcdir)/mate-session \

- -DLOCALE_DIR=\""$(datadir)/locale"\" \

- -DGTKBUILDER_DIR=\""$(pkgdatadir)"\" \

- $(DISABLE_DEPRECATED_CFLAGS)

-

-AM_CFLAGS = $(WARN_CFLAGS)

-mate_session_properties_SOURCES = \

- main.c \

- gsm-properties-dialog.h \

- gsm-properties-dialog.c \

- gsm-app-dialog.h \

- gsm-app-dialog.c \

- gsp-app.h \

- gsp-app.c \

- gsp-app-manager.h \

- gsp-app-manager.c \

- gsp-keyfile.h \

- gsp-keyfile.c

-

-mate_session_properties_LDADD = \

- $(SESSION_PROPERTIES_LIBS) \

- $(top_builddir)/egg/libeggdesktopfile.la \

- $(top_builddir)/mate-session/libgsmutil.la \

- $(MATECONF_LIBS)

-

-all: all-am

-

-.SUFFIXES:

-.SUFFIXES: .c .lo .o .obj

-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)

- @for dep in $?; do \

- case '$(am__configure_deps)' in \

- *$$dep*) \

- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \

- && { if test -f $@; then exit 0; else break; fi; }; \

- exit 1;; \

- esac; \

- done; \

- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu capplet/Makefile'; \

- $(am__cd) $(top_srcdir) && \

- $(AUTOMAKE) --gnu capplet/Makefile

-.PRECIOUS: Makefile

-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

- @case '$?' in \

- *config.status*) \

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \

- *) \

- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \

- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \

- esac;

-

-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

-

-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

-$(am__aclocal_m4_deps):

-install-binPROGRAMS: $(bin_PROGRAMS)

- @$(NORMAL_INSTALL)

- test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"

- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \

- for p in $$list; do echo "$$p $$p"; done | \

- sed 's/$(EXEEXT)$$//' | \

- while read p p1; do if test -f $$p || test -f $$p1; \

- then echo "$$p"; echo "$$p"; else :; fi; \

- done | \

- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \

- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \

- sed 'N;N;N;s,\n, ,g' | \

- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \

- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \

- if ($$2 == $$4) files[d] = files[d] " " $$1; \

- else { print "f", $$3 "/" $$4, $$1; } } \

- END { for (d in files) print "f", d, files[d] }' | \

- while read type dir files; do \

- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \

- test -z "$$files" || { \

- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \

- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \

- } \

- ; done

-

-uninstall-binPROGRAMS:

- @$(NORMAL_UNINSTALL)

- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \

- files=`for p in $$list; do echo "$$p"; done | \

- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \

- -e 's/$$/$(EXEEXT)/' `; \

- test -n "$$list" || exit 0; \

- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \

- cd "$(DESTDIR)$(bindir)" && rm -f $$files

-

-clean-binPROGRAMS:

- @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \

- echo " rm -f" $$list; \

- rm -f $$list || exit $$?; \

- test -n "$(EXEEXT)" || exit 0; \

- list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \

- echo " rm -f" $$list; \

- rm -f $$list

-mate-session-properties$(EXEEXT): $(mate_session_properties_OBJECTS) $(mate_session_properties_DEPENDENCIES)

- @rm -f mate-session-properties$(EXEEXT)

- $(AM_V_CCLD)$(LINK) $(mate_session_properties_OBJECTS) $(mate_session_properties_LDADD) $(LIBS)

-

-mostlyclean-compile:

- -rm -f *.$(OBJEXT)

-

-distclean-compile:

- -rm -f *.tab.c

-

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gsm-app-dialog.Po@am__quote@

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gsm-properties-dialog.Po@am__quote@

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gsp-app-manager.Po@am__quote@

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gsp-app.Po@am__quote@

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gsp-keyfile.Po@am__quote@

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@

-

-.c.o:

-@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<

-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

-@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@

-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@

-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

-@am__fastdepCC_FALSE@ $(COMPILE) -c $<

-

-.c.obj:

-@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`

-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

-@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@

-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@

-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`

-

-.c.lo:

-@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<

-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo

-@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@

-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@

-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<

-

-mostlyclean-libtool:

- -rm -f *.lo

-

-clean-libtool:

- -rm -rf .libs _libs

-

-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)

- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

- unique=`for i in $$list; do \

- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

- done | \

- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

- END { if (nonempty) { for (i in files) print i; }; }'`; \

- mkid -fID $$unique

-tags: TAGS

-

-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \

- $(TAGS_FILES) $(LISP)

- set x; \

- here=`pwd`; \

- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

- unique=`for i in $$list; do \

- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

- done | \

- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

- END { if (nonempty) { for (i in files) print i; }; }'`; \

- shift; \

- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \

- test -n "$$unique" || unique=$$empty_fix; \

- if test $$# -gt 0; then \

- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

- "$$@" $$unique; \

- else \

- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

- $$unique; \

- fi; \

- fi

-ctags: CTAGS

-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \

- $(TAGS_FILES) $(LISP)

- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

- unique=`for i in $$list; do \

- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

- done | \

- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \

- END { if (nonempty) { for (i in files) print i; }; }'`; \

- test -z "$(CTAGS_ARGS)$$unique" \

- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \

- $$unique

-

-GTAGS:

- here=`$(am__cd) $(top_builddir) && pwd` \

- && $(am__cd) $(top_srcdir) \

- && gtags -i $(GTAGS_ARGS) "$$here"

-

-distclean-tags:

- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

-

-distdir: $(DISTFILES)

- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

- list='$(DISTFILES)'; \

- dist_files=`for file in $$list; do echo $$file; done | \

- sed -e "s|^$$srcdirstrip/||;t" \

- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

- case $$dist_files in \

- */*) $(MKDIR_P) `echo "$$dist_files" | \

- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

- sort -u` ;; \

- esac; \

- for file in $$dist_files; do \

- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

- if test -d $$d/$$file; then \

- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

- if test -d "$(distdir)/$$file"; then \

- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

- fi; \

- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

- fi; \

- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

- else \

- test -f "$(distdir)/$$file" \

- || cp -p $$d/$$file "$(distdir)/$$file" \

- || exit 1; \

- fi; \

- done

-check-am: all-am

-check: check-am

-all-am: Makefile $(PROGRAMS)

-installdirs:

- for dir in "$(DESTDIR)$(bindir)"; do \

- test -z "$$dir" || $(MKDIR_P) "$$dir"; \

- done

-install: install-am

-install-exec: install-exec-am

-install-data: install-data-am

-uninstall: uninstall-am

-

-install-am: all-am

- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

-

-installcheck: installcheck-am

-install-strip:

- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

- `test -z '$(STRIP)' || \

- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install

-mostlyclean-generic:

-

-clean-generic:

-

-distclean-generic:

- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

-

-maintainer-clean-generic:

- @echo "This command is intended for maintainers to use"

- @echo "it deletes files that may require special tools to rebuild."

-clean: clean-am

-

-clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am

-

-distclean: distclean-am

- -rm -rf ./$(DEPDIR)

- -rm -f Makefile

-distclean-am: clean-am distclean-compile distclean-generic \

- distclean-tags

-

-dvi: dvi-am

-

-dvi-am:

-

-html: html-am

-

-html-am:

-

-info: info-am

-

-info-am:

-

-install-data-am:

-

-install-dvi: install-dvi-am

-

-install-dvi-am:

-

-install-exec-am: install-binPROGRAMS

-

-install-html: install-html-am

-

-install-html-am:

-

-install-info: install-info-am

-

-install-info-am:

-

-install-man:

-

-install-pdf: install-pdf-am

-

-install-pdf-am:

-

-install-ps: install-ps-am

-

-install-ps-am:

-

-installcheck-am:

-

-maintainer-clean: maintainer-clean-am

- -rm -rf ./$(DEPDIR)

- -rm -f Makefile

-maintainer-clean-am: distclean-am maintainer-clean-generic

-

-mostlyclean: mostlyclean-am

-

-mostlyclean-am: mostlyclean-compile mostlyclean-generic \

- mostlyclean-libtool

-

-pdf: pdf-am

-

-pdf-am:

-

-ps: ps-am

-

-ps-am:

-

-uninstall-am: uninstall-binPROGRAMS

-

-.MAKE: install-am install-strip

-

-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \

- clean-generic clean-libtool ctags distclean distclean-compile \

- distclean-generic distclean-libtool distclean-tags distdir dvi \

- dvi-am html html-am info info-am install install-am \

- install-binPROGRAMS install-data install-data-am install-dvi \

- install-dvi-am install-exec install-exec-am install-html \

- install-html-am install-info install-info-am install-man \

- install-pdf install-pdf-am install-ps install-ps-am \

- install-strip installcheck installcheck-am installdirs \

- maintainer-clean maintainer-clean-generic mostlyclean \

- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \

- pdf pdf-am ps ps-am tags uninstall uninstall-am \

- uninstall-binPROGRAMS

-

-

--include $(top_srcdir)/git.mk

-

-# Tell versions [3.59,3.63) of GNU make to not export all variables.

-# Otherwise a system limit (for SysV at least) may be exceeded.

-.NOEXPORT:

-#! /bin/sh

-# Attempt to guess a canonical system name.

-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,

-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009

-# Free Software Foundation, Inc.

-

-timestamp='2009-11-20'

-

-# This file is free software; you can redistribute it and/or modify it

-# under the terms of the GNU General Public License as published by

-# the Free Software Foundation; either version 2 of the License, or

-# (at your option) any later version.

-#

-# This program is distributed in the hope that it will be useful, but

-# WITHOUT ANY WARRANTY; without even the implied warranty of

-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU

-# General Public License for more details.

-#

-# You should have received a copy of the GNU General Public License

-# along with this program; if not, write to the Free Software

-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA

-# 02110-1301, USA.

-#

-# As a special exception to the GNU General Public License, if you

-# distribute this file as part of a program that contains a

-# configuration script generated by Autoconf, you may include it under

-# the same distribution terms that you use for the rest of that program.

-

-

-# Originally written by Per Bothner. Please send patches (context

-# diff format) to <[email protected]> and include a ChangeLog

-# entry.

-#

-# This script attempts to guess a canonical system name similar to

-# config.sub. If it succeeds, it prints the system name on stdout, and

-# exits with 0. Otherwise, it exits with 1.

-#

-# You can get the latest version of this script from:

-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD

-

-me=`echo "$0" | sed -e 's,.*/,,'`

-

-usage="\

-Usage: $0 [OPTION]

-

-Output the configuration name of the system \`$me' is run on.

-

-Operation modes:

- -h, --help print this help, then exit

- -t, --time-stamp print date of last modification, then exit

- -v, --version print version number, then exit

-

-Report bugs and patches to <[email protected]>."

-

-version="\

-GNU config.guess ($timestamp)

-

-Originally written by Per Bothner.

-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,

-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.

-

-This is free software; see the source for copying conditions. There is NO

-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."

-

-help="

-Try \`$me --help' for more information."

-

-# Parse command line

-while test $# -gt 0 ; do

- case $1 in

- --time-stamp | --time* | -t )

- echo "$timestamp" ; exit ;;

- --version | -v )

- echo "$version" ; exit ;;

- --help | --h* | -h )

- echo "$usage"; exit ;;

- -- ) # Stop option processing

- shift; break ;;

- - ) # Use stdin as input.

- break ;;

- -* )

- echo "$me: invalid option $1$help" >&2

- exit 1 ;;

- * )

- break ;;

- esac

-done

-

-if test $# != 0; then

- echo "$me: too many arguments$help" >&2

- exit 1

-fi

-

-trap 'exit 1' 1 2 15

-

-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a

-# compiler to aid in system detection is discouraged as it requires

-# temporary files to be created and, as you can see below, it is a

-# headache to deal with in a portable fashion.

-

-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still

-# use `HOST_CC' if defined, but it is deprecated.

-

-# Portable tmp directory creation inspired by the Autoconf team.

-

-set_cc_for_build='

-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;

-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;

-: ${TMPDIR=/tmp} ;

- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||

- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||

- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||

- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;

-dummy=$tmp/dummy ;

-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;

-case $CC_FOR_BUILD,$HOST_CC,$CC in

- ,,) echo "int x;" > $dummy.c ;

- for c in cc gcc c89 c99 ; do

- if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then

- CC_FOR_BUILD="$c"; break ;

- fi ;

- done ;

- if test x"$CC_FOR_BUILD" = x ; then

- CC_FOR_BUILD=no_compiler_found ;

- fi

- ;;

- ,,*) CC_FOR_BUILD=$CC ;;

- ,*,*) CC_FOR_BUILD=$HOST_CC ;;

-esac ; set_cc_for_build= ;'

-

-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.

-# ([email protected] 1994-08-24)

-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then

- PATH=$PATH:/.attbin ; export PATH

-fi

-

-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown

-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown

-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown

-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown

-

-case "${UNAME_MACHINE}" in

- i?86)

- test -z "$VENDOR" && VENDOR=pc

- ;;

- *)

- test -z "$VENDOR" && VENDOR=unknown

- ;;

-esac

-test -f /etc/SuSE-release -o -f /.buildenv && VENDOR=suse

-

-# Note: order is significant - the case branches are not exclusive.

-

-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in

- *:NetBSD:*:*)

- # NetBSD (nbsd) targets should (where applicable) match one or

- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,

- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently

- # switched to ELF, *-*-netbsd* would select the old

- # object file format. This provides both forward

- # compatibility and a consistent mechanism for selecting the

- # object file format.

- #

- # Note: NetBSD doesn't particularly care about the vendor

- # portion of the name. We always set it to "unknown".

- sysctl="sysctl -n hw.machine_arch"

- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \

- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`

- case "${UNAME_MACHINE_ARCH}" in

- armeb) machine=armeb-unknown ;;

- arm*) machine=arm-unknown ;;

- sh3el) machine=shl-unknown ;;

- sh3eb) machine=sh-unknown ;;

- sh5el) machine=sh5le-unknown ;;

- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;

- esac

- # The Operating System including object format, if it has switched

- # to ELF recently, or will in the future.

- case "${UNAME_MACHINE_ARCH}" in

- arm*|i386|m68k|ns32k|sh3*|sparc|vax)

- eval $set_cc_for_build

- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \

- | grep -q __ELF__

- then

- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).

- # Return netbsd for either. FIX?

- os=netbsd

- else

- os=netbsdelf

- fi

- ;;

- *)

- os=netbsd

- ;;

- esac

- # The OS release

- # Debian GNU/NetBSD machines have a different userland, and

- # thus, need a distinct triplet. However, they do not need

- # kernel version information, so it can be replaced with a

- # suitable tag, in the style of linux-gnu.

- case "${UNAME_VERSION}" in

- Debian*)

- release='-gnu'

- ;;

- *)

- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`

- ;;

- esac

- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:

- # contains redundant information, the shorter form:

- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.

- echo "${machine}-${os}${release}"

- exit ;;

- *:OpenBSD:*:*)

- UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`

- echo ${UNAME_MACHINE_ARCH}-${VENDOR}-openbsd${UNAME_RELEASE}

- exit ;;

- *:ekkoBSD:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-ekkobsd${UNAME_RELEASE}

- exit ;;

- *:SolidBSD:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-solidbsd${UNAME_RELEASE}

- exit ;;

- macppc:MirBSD:*:*)

- echo powerpc-${VENDOR}-mirbsd${UNAME_RELEASE}

- exit ;;

- *:MirBSD:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-mirbsd${UNAME_RELEASE}

- exit ;;

- alpha:OSF1:*:*)

- case $UNAME_RELEASE in

- *4.0)

- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`

- ;;

- *5.*)

- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`

- ;;

- esac

- # According to Compaq, /usr/sbin/psrinfo has been available on

- # OSF/1 and Tru64 systems produced since 1995. I hope that

- # covers most systems running today. This code pipes the CPU

- # types through head -n 1, so we only detect the type of CPU 0.

- ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`

- case "$ALPHA_CPU_TYPE" in

- "EV4 (21064)")

- UNAME_MACHINE="alpha" ;;

- "EV4.5 (21064)")

- UNAME_MACHINE="alpha" ;;

- "LCA4 (21066/21068)")

- UNAME_MACHINE="alpha" ;;

- "EV5 (21164)")

- UNAME_MACHINE="alphaev5" ;;

- "EV5.6 (21164A)")

- UNAME_MACHINE="alphaev56" ;;

- "EV5.6 (21164PC)")

- UNAME_MACHINE="alphapca56" ;;

- "EV5.7 (21164PC)")

- UNAME_MACHINE="alphapca57" ;;

- "EV6 (21264)")

- UNAME_MACHINE="alphaev6" ;;

- "EV6.7 (21264A)")

- UNAME_MACHINE="alphaev67" ;;

- "EV6.8CB (21264C)")

- UNAME_MACHINE="alphaev68" ;;

- "EV6.8AL (21264B)")

- UNAME_MACHINE="alphaev68" ;;

- "EV6.8CX (21264D)")

- UNAME_MACHINE="alphaev68" ;;

- "EV6.9A (21264/EV69A)")

- UNAME_MACHINE="alphaev69" ;;

- "EV7 (21364)")

- UNAME_MACHINE="alphaev7" ;;

- "EV7.9 (21364A)")

- UNAME_MACHINE="alphaev79" ;;

- esac

- # A Pn.n version is a patched version.

- # A Vn.n version is a released version.

- # A Tn.n version is a released field test version.

- # A Xn.n version is an unreleased experimental baselevel.

- # 1.2 uses "1.2" for uname -r.

- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`

- exit ;;

- Alpha\ *:Windows_NT*:*)

- # How do we know it's Interix rather than the generic POSIX subsystem?

- # Should we change UNAME_MACHINE based on the output of uname instead

- # of the specific Alpha model?

- echo alpha-pc-interix

- exit ;;

- 21064:Windows_NT:50:3)

- echo alpha-dec-winnt3.5

- exit ;;

- Amiga*:UNIX_System_V:4.0:*)

- echo m68k-${VENDOR}-sysv4

- exit ;;

- *:[Aa]miga[Oo][Ss]:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-amigaos

- exit ;;

- *:[Mm]orph[Oo][Ss]:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-morphos

- exit ;;

- *:OS/390:*:*)

- echo i370-ibm-openedition

- exit ;;

- *:z/VM:*:*)

- echo s390-ibm-zvmoe

- exit ;;

- *:OS400:*:*)

- echo powerpc-ibm-os400

- exit ;;

- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)

- echo arm-acorn-riscix${UNAME_RELEASE}

- exit ;;

- arm:riscos:*:*|arm:RISCOS:*:*)

- echo arm-${VENDOR}-riscos

- exit ;;

- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)

- echo hppa1.1-hitachi-hiuxmpp

- exit ;;

- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)

- # ak[email protected] (Earle F. Ake) contributed MIS and NILE.

- if test "`(/bin/universe) 2>/dev/null`" = att ; then

- echo pyramid-pyramid-sysv3

- else

- echo pyramid-pyramid-bsd

- fi

- exit ;;

- NILE*:*:*:dcosx)

- echo pyramid-pyramid-svr4

- exit ;;

- DRS?6000:unix:4.0:6*)

- echo sparc-icl-nx6

- exit ;;

- DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)

- case `/usr/bin/uname -p` in

- sparc) echo sparc-icl-nx7; exit ;;

- esac ;;

- s390x:SunOS:*:*)

- echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`

- exit ;;

- sun4H:SunOS:5.*:*)

- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`

- exit ;;

- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)

- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`

- exit ;;

- i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)

- echo i386-pc-auroraux${UNAME_RELEASE}

- exit ;;

- i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)

- eval $set_cc_for_build

- SUN_ARCH="i386"

- # If there is a compiler, see if it is configured for 64-bit objects.

- # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.

- # This test works for both compilers.

- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then

- if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \

- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \

- grep IS_64BIT_ARCH >/dev/null

- then

- SUN_ARCH="x86_64"

- fi

- fi

- echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`

- exit ;;

- sun4*:SunOS:6*:*)

- # According to config.sub, this is the proper way to canonicalize

- # SunOS6. Hard to guess exactly what SunOS6 will be like, but

- # it's likely to be more like Solaris than SunOS4.

- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`

- exit ;;

- sun4*:SunOS:*:*)

- case "`/usr/bin/arch -k`" in

- Series*|S4*)

- UNAME_RELEASE=`uname -v`

- ;;

- esac

- # Japanese Language versions have a version number like `4.1.3-JL'.

- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`

- exit ;;

- sun3*:SunOS:*:*)

- echo m68k-sun-sunos${UNAME_RELEASE}

- exit ;;

- sun*:*:4.2BSD:*)

- UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`

- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3

- case "`/bin/arch`" in

- sun3)

- echo m68k-sun-sunos${UNAME_RELEASE}

- ;;

- sun4)

- echo sparc-sun-sunos${UNAME_RELEASE}

- ;;

- esac

- exit ;;

- aushp:SunOS:*:*)

- echo sparc-auspex-sunos${UNAME_RELEASE}

- exit ;;

- # The situation for MiNT is a little confusing. The machine name

- # can be virtually everything (everything which is not

- # "atarist" or "atariste" at least should have a processor

- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"

- # to the lowercase version "mint" (or "freemint"). Finally

- # the system name "TOS" denotes a system which is actually not

- # MiNT. But MiNT is downward compatible to TOS, so this should

- # be no problem.

- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)

- echo m68k-atari-mint${UNAME_RELEASE}

- exit ;;

- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)

- echo m68k-atari-mint${UNAME_RELEASE}

- exit ;;

- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)

- echo m68k-atari-mint${UNAME_RELEASE}

- exit ;;

- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)

- echo m68k-milan-mint${UNAME_RELEASE}

- exit ;;

- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)

- echo m68k-hades-mint${UNAME_RELEASE}

- exit ;;

- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)

- echo m68k-${VENDOR}-mint${UNAME_RELEASE}

- exit ;;

- m68k:machten:*:*)

- echo m68k-apple-machten${UNAME_RELEASE}

- exit ;;

- powerpc:machten:*:*)

- echo powerpc-apple-machten${UNAME_RELEASE}

- exit ;;

- RISC*:Mach:*:*)

- echo mips-dec-mach_bsd4.3

- exit ;;

- RISC*:ULTRIX:*:*)

- echo mips-dec-ultrix${UNAME_RELEASE}

- exit ;;

- VAX*:ULTRIX*:*:*)

- echo vax-dec-ultrix${UNAME_RELEASE}

- exit ;;

- 2020:CLIX:*:* | 2430:CLIX:*:*)

- echo clipper-intergraph-clix${UNAME_RELEASE}

- exit ;;

- mips:*:*:UMIPS | mips:*:*:RISCos)

- eval $set_cc_for_build

- sed 's/^ //' << EOF >$dummy.c

-#ifdef __cplusplus

-#include <stdio.h> /* for printf() prototype */

- int main (int argc, char *argv[]) {

-#else

- int main (argc, argv) int argc; char *argv[]; {

-#endif

- #if defined (host_mips) && defined (MIPSEB)

- #if defined (SYSTYPE_SYSV)

- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);

- #endif

- #if defined (SYSTYPE_SVR4)

- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);

- #endif

- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)

- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);

- #endif

- #endif

- exit (-1);

- }

-EOF

- $CC_FOR_BUILD -o $dummy $dummy.c &&

- dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&

- SYSTEM_NAME=`$dummy $dummyarg` &&

- { echo "$SYSTEM_NAME"; exit; }

- echo mips-mips-riscos${UNAME_RELEASE}

- exit ;;

- Motorola:PowerMAX_OS:*:*)

- echo powerpc-motorola-powermax

- exit ;;

- Motorola:*:4.3:PL8-*)

- echo powerpc-harris-powermax

- exit ;;

- Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)

- echo powerpc-harris-powermax

- exit ;;

- Night_Hawk:Power_UNIX:*:*)

- echo powerpc-harris-powerunix

- exit ;;

- m88k:CX/UX:7*:*)

- echo m88k-harris-cxux7

- exit ;;

- m88k:*:4*:R4*)

- echo m88k-motorola-sysv4

- exit ;;

- m88k:*:3*:R3*)

- echo m88k-motorola-sysv3

- exit ;;

- AViiON:dgux:*:*)

- # DG/UX returns AViiON for all architectures

- UNAME_PROCESSOR=`/usr/bin/uname -p`

- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]

- then

- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \

- [ ${TARGET_BINARY_INTERFACE}x = x ]

- then

- echo m88k-dg-dgux${UNAME_RELEASE}

- else

- echo m88k-dg-dguxbcs${UNAME_RELEASE}

- fi

- else

- echo i586-dg-dgux${UNAME_RELEASE}

- fi

- exit ;;

- M88*:DolphinOS:*:*) # DolphinOS (SVR3)

- echo m88k-dolphin-sysv3

- exit ;;

- M88*:*:R3*:*)

- # Delta 88k system running SVR3

- echo m88k-motorola-sysv3

- exit ;;

- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)

- echo m88k-tektronix-sysv3

- exit ;;

- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)

- echo m68k-tektronix-bsd

- exit ;;

- *:IRIX*:*:*)

- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`

- exit ;;

- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.

- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id

- exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '

- i*86:AIX:*:*)

- echo i386-ibm-aix

- exit ;;

- ia64:AIX:*:*)

- if [ -x /usr/bin/oslevel ] ; then

- IBM_REV=`/usr/bin/oslevel`

- else

- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}

- fi

- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}

- exit ;;

- *:AIX:2:3)

- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then

- eval $set_cc_for_build

- sed 's/^ //' << EOF >$dummy.c

- #include <sys/systemcfg.h>

-

- main()

- {

- if (!__power_pc())

- exit(1);

- puts("powerpc-ibm-aix3.2.5");

- exit(0);

- }

-EOF

- if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`

- then

- echo "$SYSTEM_NAME"

- else

- echo rs6000-ibm-aix3.2.5

- fi

- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then

- echo rs6000-ibm-aix3.2.4

- else

- echo rs6000-ibm-aix3.2

- fi

- exit ;;

- *:AIX:*:[456])

- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`

- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then

- IBM_ARCH=rs6000

- else

- IBM_ARCH=powerpc

- fi

- if [ -x /usr/bin/oslevel ] ; then

- IBM_REV=`/usr/bin/oslevel`

- else

- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}

- fi

- echo ${IBM_ARCH}-ibm-aix${IBM_REV}

- exit ;;

- *:AIX:*:*)

- echo rs6000-ibm-aix

- exit ;;

- ibmrt:4.4BSD:*|romp-ibm:BSD:*)

- echo romp-ibm-bsd4.4

- exit ;;

- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and

- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to

- exit ;; # report: romp-ibm BSD 4.3

- *:BOSX:*:*)

- echo rs6000-bull-bosx

- exit ;;

- DPX/2?00:B.O.S.:*:*)

- echo m68k-bull-sysv3

- exit ;;

- 9000/[34]??:4.3bsd:1.*:*)

- echo m68k-hp-bsd

- exit ;;

- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)

- echo m68k-hp-bsd4.4

- exit ;;

- 9000/[34678]??:HP-UX:*:*)

- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`

- case "${UNAME_MACHINE}" in

- 9000/31? ) HP_ARCH=m68000 ;;

- 9000/[34]?? ) HP_ARCH=m68k ;;

- 9000/[678][0-9][0-9])

- if [ -x /usr/bin/getconf ]; then

- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`

- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`

- case "${sc_cpu_version}" in

- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0

- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1

- 532) # CPU_PA_RISC2_0

- case "${sc_kernel_bits}" in

- 32) HP_ARCH="hppa2.0n" ;;

- 64) HP_ARCH="hppa2.0w" ;;

- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20

- esac ;;

- esac

- fi

- if [ "${HP_ARCH}" = "" ]; then

- eval $set_cc_for_build

- sed 's/^ //' << EOF >$dummy.c

-

- #define _HPUX_SOURCE

- #include <stdlib.h>

- #include <unistd.h>

-

- int main ()

- {

- #if defined(_SC_KERNEL_BITS)

- long bits = sysconf(_SC_KERNEL_BITS);

- #endif

- long cpu = sysconf (_SC_CPU_VERSION);

-

- switch (cpu)

- {

- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;

- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;

- case CPU_PA_RISC2_0:

- #if defined(_SC_KERNEL_BITS)

- switch (bits)

- {

- case 64: puts ("hppa2.0w"); break;

- case 32: puts ("hppa2.0n"); break;

- default: puts ("hppa2.0"); break;

- } break;

- #else /* !defined(_SC_KERNEL_BITS) */

- puts ("hppa2.0"); break;

- #endif

- default: puts ("hppa1.0"); break;

- }

- exit (0);

- }

-EOF

- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`

- test -z "$HP_ARCH" && HP_ARCH=hppa

- fi ;;

- esac

- if [ ${HP_ARCH} = "hppa2.0w" ]

- then

- eval $set_cc_for_build

-

- # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating

- # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler

- # generating 64-bit code. GNU and HP use different nomenclature:

- #

- # $ CC_FOR_BUILD=cc ./config.guess

- # => hppa2.0w-hp-hpux11.23

- # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess

- # => hppa64-hp-hpux11.23

-

- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |

- grep -q __LP64__

- then

- HP_ARCH="hppa2.0w"

- else

- HP_ARCH="hppa64"

- fi

- fi

- echo ${HP_ARCH}-hp-hpux${HPUX_REV}

- exit ;;

- ia64:HP-UX:*:*)

- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`

- echo ia64-hp-hpux${HPUX_REV}

- exit ;;

- 3050*:HI-UX:*:*)

- eval $set_cc_for_build

- sed 's/^ //' << EOF >$dummy.c

- #include <unistd.h>

- int

- main ()

- {

- long cpu = sysconf (_SC_CPU_VERSION);

- /* The order matters, because CPU_IS_HP_MC68K erroneously returns

- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct

- results, however. */

- if (CPU_IS_PA_RISC (cpu))

- {

- switch (cpu)

- {

- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;

- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;

- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;

- default: puts ("hppa-hitachi-hiuxwe2"); break;

- }

- }

- else if (CPU_IS_HP_MC68K (cpu))

- puts ("m68k-hitachi-hiuxwe2");

- else puts ("unknown-hitachi-hiuxwe2");

- exit (0);

- }

-EOF

- $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&

- { echo "$SYSTEM_NAME"; exit; }

- echo unknown-hitachi-hiuxwe2

- exit ;;

- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )

- echo hppa1.1-hp-bsd

- exit ;;

- 9000/8??:4.3bsd:*:*)

- echo hppa1.0-hp-bsd

- exit ;;

- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)

- echo hppa1.0-hp-mpeix

- exit ;;

- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )

- echo hppa1.1-hp-osf

- exit ;;

- hp8??:OSF1:*:*)

- echo hppa1.0-hp-osf

- exit ;;

- i*86:OSF1:*:*)

- if [ -x /usr/sbin/sysversion ] ; then

- echo ${UNAME_MACHINE}-${VENDOR}-osf1mk

- else

- echo ${UNAME_MACHINE}-${VENDOR}-osf1

- fi

- exit ;;

- parisc*:Lites*:*:*)

- echo hppa1.1-hp-lites

- exit ;;

- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)

- echo c1-convex-bsd

- exit ;;

- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)

- if getsysinfo -f scalar_acc

- then echo c32-convex-bsd

- else echo c2-convex-bsd

- fi

- exit ;;

- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)

- echo c34-convex-bsd

- exit ;;

- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)

- echo c38-convex-bsd

- exit ;;

- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)

- echo c4-convex-bsd

- exit ;;

- CRAY*Y-MP:*:*:*)

- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'

- exit ;;

- CRAY*[A-Z]90:*:*:*)

- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \

- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \

- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \

- -e 's/\.[^.]*$/.X/'

- exit ;;

- CRAY*TS:*:*:*)

- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'

- exit ;;

- CRAY*T3E:*:*:*)

- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'

- exit ;;

- CRAY*SV1:*:*:*)

- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'

- exit ;;

- *:UNICOS/mp:*:*)

- echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'

- exit ;;

- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)

- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`

- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`

- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`

- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"

- exit ;;

- 5000:UNIX_System_V:4.*:*)

- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`

- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`

- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"

- exit ;;

- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)

- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}

- exit ;;

- sparc*:BSD/OS:*:*)

- echo sparc-${VENDOR}-bsdi${UNAME_RELEASE}

- exit ;;

- *:BSD/OS:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-bsdi${UNAME_RELEASE}

- exit ;;

- *:FreeBSD:*:*)

- case ${UNAME_MACHINE} in

- pc98)

- echo i386-${VENDOR}-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;

- amd64)

- echo x86_64-${VENDOR}-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;

- *)

- echo ${UNAME_MACHINE}-${VENDOR}-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;

- esac

- exit ;;

- i*:CYGWIN*:*)

- echo ${UNAME_MACHINE}-pc-cygwin

- exit ;;

- *:MINGW*:*)

- echo ${UNAME_MACHINE}-pc-mingw32

- exit ;;

- i*:windows32*:*)

- # uname -m includes "-pc" on this system.

- echo ${UNAME_MACHINE}-mingw32

- exit ;;

- i*:PW*:*)

- echo ${UNAME_MACHINE}-pc-pw32

- exit ;;

- *:Interix*:*)

- case ${UNAME_MACHINE} in

- x86)

- echo i586-pc-interix${UNAME_RELEASE}

- exit ;;

- authenticamd | genuineintel | EM64T)

- echo x86_64-${VENDOR}-interix${UNAME_RELEASE}

- exit ;;

- IA64)

- echo ia64-${VENDOR}-interix${UNAME_RELEASE}

- exit ;;

- esac ;;

- [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)

- echo i${UNAME_MACHINE}-pc-mks

- exit ;;

- 8664:Windows_NT:*)

- echo x86_64-pc-mks

- exit ;;

- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)

- # How do we know it's Interix rather than the generic POSIX subsystem?

- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we

- # UNAME_MACHINE based on the output of uname instead of i386?

- echo i586-pc-interix

- exit ;;

- i*:UWIN*:*)

- echo ${UNAME_MACHINE}-pc-uwin

- exit ;;

- amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)

- echo x86_64-${VENDOR}-cygwin

- exit ;;

- p*:CYGWIN*:*)

- echo powerpcle-${VENDOR}-cygwin

- exit ;;

- prep*:SunOS:5.*:*)

- echo powerpcle-${VENDOR}-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`

- exit ;;

- *:GNU:*:*)

- # the GNU system

- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-${VENDOR}-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`

- exit ;;

- *:GNU/*:*:*)

- # other systems with GNU libc and userland

- echo ${UNAME_MACHINE}-${VENDOR}-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu

- exit ;;

- i*86:Minix:*:*)

- echo ${UNAME_MACHINE}-pc-minix

- exit ;;

- alpha:Linux:*:*)

- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in

- EV5) UNAME_MACHINE=alphaev5 ;;

- EV56) UNAME_MACHINE=alphaev56 ;;

- PCA56) UNAME_MACHINE=alphapca56 ;;

- PCA57) UNAME_MACHINE=alphapca56 ;;

- EV6) UNAME_MACHINE=alphaev6 ;;

- EV67) UNAME_MACHINE=alphaev67 ;;

- EV68*) UNAME_MACHINE=alphaev68 ;;

- esac

- objdump --private-headers /bin/sh | grep -q ld.so.1

- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi

- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu${LIBC}

- exit ;;

- arm*:Linux:*:*)

- eval $set_cc_for_build

- if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \

- | grep -q __ARM_EABI__

- then

- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu

- else

- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnueabi

- fi

- exit ;;

- avr32*:Linux:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu

- exit ;;

- cris:Linux:*:*)

- echo cris-axis-linux-gnu

- exit ;;

- crisv32:Linux:*:*)

- echo crisv32-axis-linux-gnu

- exit ;;

- frv:Linux:*:*)

- echo frv-${VENDOR}-linux-gnu

- exit ;;

- i*86:Linux:*:*)

- LIBC=gnu

- eval $set_cc_for_build

- sed 's/^ //' << EOF >$dummy.c

- #ifdef __dietlibc__

- LIBC=dietlibc

- #endif

-EOF

- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`

- echo "${UNAME_MACHINE}-${VENDOR}-linux-${LIBC}"

- exit ;;

- ia64:Linux:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu

- exit ;;

- m32r*:Linux:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu

- exit ;;

- m68*:Linux:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu

- exit ;;

- mips:Linux:*:* | mips64:Linux:*:*)

- eval $set_cc_for_build

- sed 's/^ //' << EOF >$dummy.c

- #undef CPU

- #undef ${UNAME_MACHINE}

- #undef ${UNAME_MACHINE}el

- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)

- CPU=${UNAME_MACHINE}el

- #else

- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)

- CPU=${UNAME_MACHINE}

- #else

- CPU=

- #endif

- #endif

-EOF

- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`

- test x"${CPU}" != x && { echo "${CPU}-${VENDOR}-linux-gnu"; exit; }

- ;;

- or32:Linux:*:*)

- echo or32-${VENDOR}-linux-gnu

- exit ;;

- padre:Linux:*:*)

- echo sparc-${VENDOR}-linux-gnu

- exit ;;

- parisc64:Linux:*:* | hppa64:Linux:*:*)

- echo hppa64-${VENDOR}-linux-gnu

- exit ;;

- parisc:Linux:*:* | hppa:Linux:*:*)

- # Look for CPU level

- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in

- PA7*) echo hppa1.1-${VENDOR}-linux-gnu ;;

- PA8*) echo hppa2.0-${VENDOR}-linux-gnu ;;

- *) echo hppa-${VENDOR}-linux-gnu ;;

- esac

- exit ;;

- ppc64:Linux:*:*)

- echo powerpc64-${VENDOR}-linux-gnu

- exit ;;

- ppc:Linux:*:*)

- echo powerpc-${VENDOR}-linux-gnu

- exit ;;

- s390:Linux:*:* | s390x:Linux:*:*)

- echo ${UNAME_MACHINE}-ibm-linux

- exit ;;

- sh64*:Linux:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu

- exit ;;

- sh*:Linux:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu

- exit ;;

- sparc:Linux:*:* | sparc64:Linux:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu

- exit ;;

- vax:Linux:*:*)

- echo ${UNAME_MACHINE}-dec-linux-gnu

- exit ;;

- x86_64:Linux:*:*)

- echo x86_64-${VENDOR}-linux-gnu

- exit ;;

- xtensa*:Linux:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu

- exit ;;

- i*86:DYNIX/ptx:4*:*)

- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.

- # earlier versions are messed up and put the nodename in both

- # sysname and nodename.

- echo i386-sequent-sysv4

- exit ;;

- i*86:UNIX_SV:4.2MP:2.*)

- # Unixware is an offshoot of SVR4, but it has its own version

- # number series starting with 2...

- # I am not positive that other SVR4 systems won't match this,

- # I just have to hope. -- rms.

- # Use sysv4.2uw... so that sysv4* matches it.

- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}

- exit ;;

- i*86:OS/2:*:*)

- # If we were able to find `uname', then EMX Unix compatibility

- # is probably installed.

- echo ${UNAME_MACHINE}-pc-os2-emx

- exit ;;

- i*86:XTS-300:*:STOP)

- echo ${UNAME_MACHINE}-${VENDOR}-stop

- exit ;;

- i*86:atheos:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-atheos

- exit ;;

- i*86:syllable:*:*)

- echo ${UNAME_MACHINE}-pc-syllable

- exit ;;

- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)

- echo i386-${VENDOR}-lynxos${UNAME_RELEASE}

- exit ;;

- i*86:*DOS:*:*)

- echo ${UNAME_MACHINE}-pc-msdosdjgpp

- exit ;;

- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)

- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`

- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then

- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}

- else

- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}

- fi

- exit ;;

- i*86:*:5:[678]*)

- # UnixWare 7.x, OpenUNIX and OpenServer 6.

- case `/bin/uname -X | grep "^Machine"` in

- *486*) UNAME_MACHINE=i486 ;;

- *Pentium) UNAME_MACHINE=i586 ;;

- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;

- esac

- echo ${UNAME_MACHINE}-${VENDOR}-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}

- exit ;;

- i*86:*:3.2:*)

- if test -f /usr/options/cb.name; then

- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`

- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL

- elif /bin/uname -X 2>/dev/null >/dev/null ; then

- UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`

- (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486

- (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \

- && UNAME_MACHINE=i586

- (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \

- && UNAME_MACHINE=i686

- (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \

- && UNAME_MACHINE=i686

- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL

- else

- echo ${UNAME_MACHINE}-pc-sysv32

- fi

- exit ;;

- pc:*:*:*)

- # Left here for compatibility:

- # uname -m prints for DJGPP always 'pc', but it prints nothing about

- # the processor, so we play safe by assuming i586.

- # Note: whatever this is, it MUST be the same as what config.sub

- # prints for the "djgpp" host, or else GDB configury will decide that

- # this is a cross-build.

- echo i586-pc-msdosdjgpp

- exit ;;

- Intel:Mach:3*:*)

- echo i386-pc-mach3

- exit ;;

- paragon:*:*:*)

- echo i860-intel-osf1

- exit ;;

- i860:*:4.*:*) # i860-SVR4

- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then

- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4

- else # Add other i860-SVR4 vendors below as they are discovered.

- echo i860-${VENDOR}-sysv${UNAME_RELEASE} # Unknown i860-SVR4

- fi

- exit ;;

- mini*:CTIX:SYS*5:*)

- # "miniframe"

- echo m68010-convergent-sysv

- exit ;;

- mc68k:UNIX:SYSTEM5:3.51m)

- echo m68k-convergent-sysv

- exit ;;

- M680?0:D-NIX:5.3:*)

- echo m68k-diab-dnix

- exit ;;

- M68*:*:R3V[5678]*:*)

- test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;

- 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)

- OS_REL=''

- test -r /etc/.relid \

- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`

- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \

- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }

- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \

- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;

- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)

- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \

- && { echo i486-ncr-sysv4; exit; } ;;

- NCR*:*:4.2:* | MPRAS*:*:4.2:*)

- OS_REL='.3'

- test -r /etc/.relid \

- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`

- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \

- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }

- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \

- && { echo i586-ncr-sysv4.3${OS_REL}; exit; }

- /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \

- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;

- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)

- echo m68k-${VENDOR}-lynxos${UNAME_RELEASE}

- exit ;;

- mc68030:UNIX_System_V:4.*:*)

- echo m68k-atari-sysv4

- exit ;;

- TSUNAMI:LynxOS:2.*:*)

- echo sparc-${VENDOR}-lynxos${UNAME_RELEASE}

- exit ;;

- rs6000:LynxOS:2.*:*)

- echo rs6000-${VENDOR}-lynxos${UNAME_RELEASE}

- exit ;;

- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)

- echo powerpc-${VENDOR}-lynxos${UNAME_RELEASE}

- exit ;;

- SM[BE]S:UNIX_SV:*:*)

- echo mips-dde-sysv${UNAME_RELEASE}

- exit ;;

- RM*:ReliantUNIX-*:*:*)

- echo mips-sni-sysv4

- exit ;;

- RM*:SINIX-*:*:*)

- echo mips-sni-sysv4

- exit ;;

- *:SINIX-*:*:*)

- if uname -p 2>/dev/null >/dev/null ; then

- UNAME_MACHINE=`(uname -p) 2>/dev/null`

- echo ${UNAME_MACHINE}-sni-sysv4

- else

- echo ns32k-sni-sysv

- fi

- exit ;;

- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort

- # says <[email protected]>

- echo i586-unisys-sysv4

- exit ;;

- *:UNIX_System_V:4*:FTX*)

- # From Gerald Hewes <[email protected]>.

- # How about differentiating between stratus architectures? -djm

- echo hppa1.1-stratus-sysv4

- exit ;;

- *:*:*:FTX*)

- # From [email protected].

- echo i860-stratus-sysv4

- exit ;;

- i*86:VOS:*:*)

- # From [email protected].

- echo ${UNAME_MACHINE}-stratus-vos

- exit ;;

- *:VOS:*:*)

- # From [email protected].

- echo hppa1.1-stratus-vos

- exit ;;

- mc68*:A/UX:*:*)

- echo m68k-apple-aux${UNAME_RELEASE}

- exit ;;

- news*:NEWS-OS:6*:*)

- echo mips-sony-newsos6

- exit ;;

- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)

- if [ -d /usr/nec ]; then

- echo mips-nec-sysv${UNAME_RELEASE}

- else

- echo mips-${VENDOR}-sysv${UNAME_RELEASE}

- fi

- exit ;;

- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.

- echo powerpc-be-beos

- exit ;;

- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.

- echo powerpc-apple-beos

- exit ;;

- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.

- echo i586-pc-beos

- exit ;;

- BePC:Haiku:*:*) # Haiku running on Intel PC compatible.

- echo i586-pc-haiku

- exit ;;

- SX-4:SUPER-UX:*:*)

- echo sx4-nec-superux${UNAME_RELEASE}

- exit ;;

- SX-5:SUPER-UX:*:*)

- echo sx5-nec-superux${UNAME_RELEASE}

- exit ;;

- SX-6:SUPER-UX:*:*)

- echo sx6-nec-superux${UNAME_RELEASE}

- exit ;;

- SX-7:SUPER-UX:*:*)

- echo sx7-nec-superux${UNAME_RELEASE}

- exit ;;

- SX-8:SUPER-UX:*:*)

- echo sx8-nec-superux${UNAME_RELEASE}

- exit ;;

- SX-8R:SUPER-UX:*:*)

- echo sx8r-nec-superux${UNAME_RELEASE}

- exit ;;

- Power*:Rhapsody:*:*)

- echo powerpc-apple-rhapsody${UNAME_RELEASE}

- exit ;;

- *:Rhapsody:*:*)

- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}

- exit ;;

- *:Darwin:*:*)

- UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown

- case $UNAME_PROCESSOR in

- i386)

- eval $set_cc_for_build

- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then

- if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \

- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \

- grep IS_64BIT_ARCH >/dev/null

- then

- UNAME_PROCESSOR="x86_64"

- fi

- fi ;;

- unknown) UNAME_PROCESSOR=powerpc ;;

- esac

- echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}

- exit ;;

- *:procnto*:*:* | *:QNX:[0123456789]*:*)

- UNAME_PROCESSOR=`uname -p`

- if test "$UNAME_PROCESSOR" = "x86"; then

- UNAME_PROCESSOR=i386

- UNAME_MACHINE=pc

- fi

- echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}

- exit ;;

- *:QNX:*:4*)

- echo i386-pc-qnx

- exit ;;

- NSE-?:NONSTOP_KERNEL:*:*)

- echo nse-tandem-nsk${UNAME_RELEASE}

- exit ;;

- NSR-?:NONSTOP_KERNEL:*:*)

- echo nsr-tandem-nsk${UNAME_RELEASE}

- exit ;;

- *:NonStop-UX:*:*)

- echo mips-compaq-nonstopux

- exit ;;

- BS2000:POSIX*:*:*)

- echo bs2000-siemens-sysv

- exit ;;

- DS/*:UNIX_System_V:*:*)

- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}

- exit ;;

- *:Plan9:*:*)

- # "uname -m" is not consistent, so use $cputype instead. 386

- # is converted to i386 for consistency with other x86

- # operating systems.

- if test "$cputype" = "386"; then

- UNAME_MACHINE=i386

- else

- UNAME_MACHINE="$cputype"

- fi

- echo ${UNAME_MACHINE}-${VENDOR}-plan9

- exit ;;

- *:TOPS-10:*:*)

- echo pdp10-${VENDOR}-tops10

- exit ;;

- *:TENEX:*:*)

- echo pdp10-${VENDOR}-tenex

- exit ;;

- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)

- echo pdp10-dec-tops20

- exit ;;

- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)

- echo pdp10-xkl-tops20

- exit ;;

- *:TOPS-20:*:*)

- echo pdp10-${VENDOR}-tops20

- exit ;;

- *:ITS:*:*)

- echo pdp10-${VENDOR}-its

- exit ;;

- SEI:*:*:SEIUX)

- echo mips-sei-seiux${UNAME_RELEASE}

- exit ;;

- *:DragonFly:*:*)

- echo ${UNAME_MACHINE}-${VENDOR}-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`

- exit ;;

- *:*VMS:*:*)

- UNAME_MACHINE=`(uname -p) 2>/dev/null`

- case "${UNAME_MACHINE}" in

- A*) echo alpha-dec-vms ; exit ;;

- I*) echo ia64-dec-vms ; exit ;;

- V*) echo vax-dec-vms ; exit ;;

- esac ;;

- *:XENIX:*:SysV)

- echo i386-pc-xenix

- exit ;;

- i*86:skyos:*:*)

- echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'

- exit ;;

- i*86:rdos:*:*)

- echo ${UNAME_MACHINE}-pc-rdos

- exit ;;

- i*86:AROS:*:*)

- echo ${UNAME_MACHINE}-pc-aros

- exit ;;

-esac

-

-#echo '(No uname command or uname output not recognized.)' 1>&2

-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2

-

-eval $set_cc_for_build

-cat >$dummy.c <<EOF

-#ifdef _SEQUENT_

-# include <sys/types.h>

-# include <sys/utsname.h>

-#endif

-main ()

-{

-#if defined (sony)

-#if defined (MIPSEB)

- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,

- I don't know.... */

- printf ("mips-sony-bsd\n"); exit (0);

-#else

-#include <sys/param.h>

- printf ("m68k-sony-newsos%s\n",

-#ifdef NEWSOS4

- "4"

-#else

- ""

-#endif

- ); exit (0);

-#endif

-#endif

-

-#if defined (__arm) && defined (__acorn) && defined (__unix)

- printf ("arm-acorn-riscix\n"); exit (0);

-#endif

-

-#if defined (hp300) && !defined (hpux)

- printf ("m68k-hp-bsd\n"); exit (0);

-#endif

-

-#if defined (NeXT)

-#if !defined (__ARCHITECTURE__)

-#define __ARCHITECTURE__ "m68k"

-#endif

- int version;

- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;

- if (version < 4)

- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);

- else

- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);

- exit (0);

-#endif

-

-#if defined (MULTIMAX) || defined (n16)

-#if defined (UMAXV)

- printf ("ns32k-encore-sysv\n"); exit (0);

-#else

-#if defined (CMU)

- printf ("ns32k-encore-mach\n"); exit (0);

-#else

- printf ("ns32k-encore-bsd\n"); exit (0);

-#endif

-#endif

-#endif

-

-#if defined (__386BSD__)

- printf ("i386-pc-bsd\n"); exit (0);

-#endif

-

-#if defined (sequent)

-#if defined (i386)

- printf ("i386-sequent-dynix\n"); exit (0);

-#endif

-#if defined (ns32000)

- printf ("ns32k-sequent-dynix\n"); exit (0);

-#endif

-#endif

-

-#if defined (_SEQUENT_)

- struct utsname un;

-

- uname(&un);

-

- if (strncmp(un.version, "V2", 2) == 0) {

- printf ("i386-sequent-ptx2\n"); exit (0);

- }

- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */

- printf ("i386-sequent-ptx1\n"); exit (0);

- }

- printf ("i386-sequent-ptx\n"); exit (0);

-

-#endif

-

-#if defined (vax)

-# if !defined (ultrix)

-# include <sys/param.h>

-# if defined (BSD)

-# if BSD == 43

- printf ("vax-dec-bsd4.3\n"); exit (0);

-# else

-# if BSD == 199006

- printf ("vax-dec-bsd4.3reno\n"); exit (0);

-# else

- printf ("vax-dec-bsd\n"); exit (0);

-# endif

-# endif

-# else

- printf ("vax-dec-bsd\n"); exit (0);

-# endif

-# else

- printf ("vax-dec-ultrix\n"); exit (0);

-# endif

-#endif

-

-#if defined (alliant) && defined (i860)

- printf ("i860-alliant-bsd\n"); exit (0);

-#endif

-

- exit (1);

-}

-EOF

-

-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&

- { echo "$SYSTEM_NAME"; exit; }

-

-# Apollos put the system type in the environment.

-

-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }

-

-# Convex versions that predate uname can use getsysinfo(1)

-

-if [ -x /usr/convex/getsysinfo ]

-then

- case `getsysinfo -f cpu_type` in

- c1*)

- echo c1-convex-bsd

- exit ;;

- c2*)

- if getsysinfo -f scalar_acc

- then echo c32-convex-bsd

- else echo c2-convex-bsd

- fi

- exit ;;

- c34*)

- echo c34-convex-bsd

- exit ;;

- c38*)

- echo c38-convex-bsd

- exit ;;

- c4*)

- echo c4-convex-bsd

- exit ;;

- esac

-fi

-

-cat >&2 <<EOF

-$0: unable to guess system type

-

-This script, last modified $timestamp, has failed to recognize

-the operating system you are using. It is advised that you

-download the most up to date version of the config scripts from

-

- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD

-and

- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD

-

-If the version you run ($0) is already up to date, please

-send the following data and any information you think might be

-pertinent to <[email protected]> in order to provide the needed

-information to handle your system.

-

-config.guess timestamp = $timestamp

-

-uname -m = `(uname -m) 2>/dev/null || echo unknown`

-uname -r = `(uname -r) 2>/dev/null || echo unknown`

-uname -s = `(uname -s) 2>/dev/null || echo unknown`

-uname -v = `(uname -v) 2>/dev/null || echo unknown`

-

-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`

-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`

-

-hostinfo = `(hostinfo) 2>/dev/null`

-/bin/universe = `(/bin/universe) 2>/dev/null`

-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`

-/bin/arch = `(/bin/arch) 2>/dev/null`

-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`

-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`

-

-UNAME_MACHINE = ${UNAME_MACHINE}

-UNAME_RELEASE = ${UNAME_RELEASE}

-UNAME_SYSTEM = ${UNAME_SYSTEM}

-UNAME_VERSION = ${UNAME_VERSION}

-EOF

-

-exit 1

-

-# Local variables:

-# eval: (add-hook 'write-file-hooks 'time-stamp)

-# time-stamp-start: "timestamp='"

-# time-stamp-format: "%:y-%02m-%02d"

-# time-stamp-end: "'"

-# End:

-/* config.h.in. Generated from configure.ac by autoheader. */

-

-/* Define if IPV6 is supported */

-#undef ENABLE_IPV6

-

-/* always defined to indicate that i18n is enabled */

-#undef ENABLE_NLS

-

-/* The gettext translation domain */

-#undef GETTEXT_PACKAGE

-

-/* Define to 1 if you have the `bind_textdomain_codeset' function. */

-#undef HAVE_BIND_TEXTDOMAIN_CODESET

-

-/* Define to 1 if you have the `dcgettext' function. */

-#undef HAVE_DCGETTEXT

-

-/* Define to 1 if you have the <dlfcn.h> header file. */

-#undef HAVE_DLFCN_H

-

-/* Define to 1 if you have the <execinfo.h> header file. */

-#undef HAVE_EXECINFO_H

-

-/* Define if the GNU gettext() function is already present or preinstalled. */

-#undef HAVE_GETTEXT

-

-/* Define to 1 if you have the <inttypes.h> header file. */

-#undef HAVE_INTTYPES_H

-

-/* Define if your <locale.h> file defines LC_MESSAGES. */

-#undef HAVE_LC_MESSAGES

-

-/* Define to 1 if you have the <locale.h> header file. */

-#undef HAVE_LOCALE_H

-

-/* Define to 1 if you have the <memory.h> header file. */

-#undef HAVE_MEMORY_H

-

-/* Define to 1 if you have the <stdint.h> header file. */

-#undef HAVE_STDINT_H

-

-/* Define to 1 if you have the <stdlib.h> header file. */

-#undef HAVE_STDLIB_H

-

-/* Define to 1 if you have the <strings.h> header file. */

-#undef HAVE_STRINGS_H

-

-/* Define to 1 if you have the <string.h> header file. */

-#undef HAVE_STRING_H

-

-/* Define to 1 if you have the <syslog.h> header file. */

-#undef HAVE_SYSLOG_H

-

-/* Define to 1 if you have the <sys/param.h> header file. */

-#undef HAVE_SYS_PARAM_H

-

-/* Define to 1 if you have the <sys/stat.h> header file. */

-#undef HAVE_SYS_STAT_H

-

-/* Define to 1 if you have the <sys/types.h> header file. */

-#undef HAVE_SYS_TYPES_H

-

-/* Define to 1 if you have the <tcpd.h> header file. */

-#undef HAVE_TCPD_H

-

-/* Define to 1 if you have the <unistd.h> header file. */

-#undef HAVE_UNISTD_H

-

-/* Define to 1 if you have the <X11/Xtrans/Xtrans.h> header file. */

-#undef HAVE_X11_XTRANS_XTRANS_H

-

-/* Have the Render X extension */

-#undef HAVE_XRENDER

-

-/* Have the SYNC extension library */

-#undef HAVE_XSYNC

-

-/* Have the XTest extension library */

-#undef HAVE_XTEST

-

-/* Define to the sub-directory in which libtool stores uninstalled libraries.

- */

-#undef LT_OBJDIR

-

-/* Enable additional debugging at the expense of performance and size */

-#undef MATE_ENABLE_DEBUG

-

-/* Name of package */

-#undef PACKAGE

-

-/* Define to the address where bug reports for this package should be sent. */

-#undef PACKAGE_BUGREPORT

-

-/* Define to the full name of this package. */

-#undef PACKAGE_NAME

-

-/* Define to the full name and version of this package. */

-#undef PACKAGE_STRING

-

-/* Define to the one symbol short name of this package. */

-#undef PACKAGE_TARNAME

-

-/* Define to the home page for this package. */

-#undef PACKAGE_URL

-

-/* Define to the version of this package. */

-#undef PACKAGE_VERSION

-

-/* Define to 1 if you have the ANSI C header files. */

-#undef STDC_HEADERS

-

-/* Version number of package */

-#undef VERSION

-

-/* Define to 1 if the X Window System is missing or not being used. */

-#undef X_DISPLAY_MISSING

-#! /bin/sh

-# Configuration validation subroutine script.

-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,

-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009

-# Free Software Foundation, Inc.

-

-timestamp='2009-11-20'

-

-# This file is (in principle) common to ALL GNU software.

-# The presence of a machine in this file suggests that SOME GNU software

-# can handle that machine. It does not imply ALL GNU software can.

-#

-# This file is free software; you can redistribute it and/or modify

-# it under the terms of the GNU General Public License as published by

-# the Free Software Foundation; either version 2 of the License, or

-# (at your option) any later version.

-#

-# This program is distributed in the hope that it will be useful,

-# but WITHOUT ANY WARRANTY; without even the implied warranty of

-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

-# GNU General Public License for more details.

-#

-# You should have received a copy of the GNU General Public License

-# along with this program; if not, write to the Free Software

-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA

-# 02110-1301, USA.

-#

-# As a special exception to the GNU General Public License, if you

-# distribute this file as part of a program that contains a

-# configuration script generated by Autoconf, you may include it under

-# the same distribution terms that you use for the rest of that program.

-

-

-# Please send patches to <[email protected]>. Submit a context

-# diff and a properly formatted GNU ChangeLog entry.

-#

-# Configuration subroutine to validate and canonicalize a configuration type.

-# Supply the specified configuration type as an argument.

-# If it is invalid, we print an error message on stderr and exit with code 1.

-# Otherwise, we print the canonical config type on stdout and succeed.

-

-# You can get the latest version of this script from:

-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD

-

-# This file is supposed to be the same for all GNU packages

-# and recognize all the CPU types, system types and aliases

-# that are meaningful with *any* GNU software.

-# Each package is responsible for reporting which valid configurations

-# it does not support. The user should be able to distinguish

-# a failure to support a valid configuration from a meaningless

-# configuration.

-

-# The goal of this file is to map all the various variations of a given

-# machine specification into a single specification in the form:

-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM

-# or in some cases, the newer four-part form:

-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM

-# It is wrong to echo any other type of specification.

-

-me=`echo "$0" | sed -e 's,.*/,,'`

-

-usage="\

-Usage: $0 [OPTION] CPU-MFR-OPSYS

- $0 [OPTION] ALIAS

-

-Canonicalize a configuration name.

-

-Operation modes:

- -h, --help print this help, then exit

- -t, --time-stamp print date of last modification, then exit

- -v, --version print version number, then exit

-

-Report bugs and patches to <[email protected]>."

-

-version="\

-GNU config.sub ($timestamp)

-

-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,

-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.

-

-This is free software; see the source for copying conditions. There is NO

-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."

-

-help="

-Try \`$me --help' for more information."

-

-# Parse command line

-while test $# -gt 0 ; do

- case $1 in

- --time-stamp | --time* | -t )

- echo "$timestamp" ; exit ;;

- --version | -v )

- echo "$version" ; exit ;;

- --help | --h* | -h )

- echo "$usage"; exit ;;

- -- ) # Stop option processing

- shift; break ;;

- - ) # Use stdin as input.

- break ;;

- -* )

- echo "$me: invalid option $1$help"

- exit 1 ;;

-

- *local*)

- # First pass through any local machine types.

- echo $1

- exit ;;

-

- * )

- break ;;

- esac

-done

-

-case $# in

- 0) echo "$me: missing argument$help" >&2

- exit 1;;

- 1) ;;

- *) echo "$me: too many arguments$help" >&2

- exit 1;;

-esac

-

-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).

-# Here we must recognize all the valid KERNEL-OS combinations.

-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`

-case $maybe_os in

- nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \

- uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \

- kopensolaris*-gnu* | \

- storm-chaos* | os2-emx* | rtmk-nova*)

- os=-$maybe_os

- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`

- ;;

- *)

- basic_machine=`echo $1 | sed 's/-[^-]*$//'`

- if [ $basic_machine != $1 ]

- then os=`echo $1 | sed 's/.*-/-/'`

- else os=; fi

- ;;

-esac

-

-### Let's recognize common machines as not being operating systems so

-### that things like config.sub decstation-3100 work. We also

-### recognize some manufacturers as not being operating systems, so we

-### can provide default operating systems below.

-case $os in

- -sun*os*)

- # Prevent following clause from handling this invalid input.

- ;;

- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \

- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \

- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \

- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\

- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \

- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \

- -apple | -axis | -knuth | -cray | -microblaze)

- os=

- basic_machine=$1

- ;;

- -bluegene*)

- os=-cnk

- ;;

- -sim | -cisco | -oki | -wec | -winbond)

- os=

- basic_machine=$1

- ;;

- -scout)

- ;;

- -wrs)

- os=-vxworks

- basic_machine=$1

- ;;

- -chorusos*)

- os=-chorusos

- basic_machine=$1

- ;;

- -chorusrdb)

- os=-chorusrdb

- basic_machine=$1

- ;;

- -hiux*)

- os=-hiuxwe2

- ;;

- -sco6)

- os=-sco5v6

- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`

- ;;

- -sco5)

- os=-sco3.2v5

- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`

- ;;

- -sco4)

- os=-sco3.2v4

- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`

- ;;

- -sco3.2.[4-9]*)

- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`

- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`

- ;;

- -sco3.2v[4-9]*)

- # Don't forget version if it is 3.2v4 or newer.

- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`

- ;;

- -sco5v6*)

- # Don't forget version if it is 3.2v4 or newer.

- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`

- ;;

- -sco*)

- os=-sco3.2v2

- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`

- ;;

- -udk*)

- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`

- ;;

- -isc)

- os=-isc2.2

- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`

- ;;

- -clix*)

- basic_machine=clipper-intergraph

- ;;

- -isc*)

- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`

- ;;

- -lynx*)

- os=-lynxos

- ;;

- -ptx*)

- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`

- ;;

- -windowsnt*)

- os=`echo $os | sed -e 's/windowsnt/winnt/'`

- ;;

- -psos*)

- os=-psos

- ;;

- -mint | -mint[0-9]*)

- basic_machine=m68k-atari

- os=-mint

- ;;

-esac

-

-# Decode aliases for certain CPU-COMPANY combinations.

-case $basic_machine in

- # Recognize the basic CPU types without company name.

- # Some are omitted here because they have special meanings below.

- 1750a | 580 \

- | a29k \

- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \

- | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \

- | am33_2.0 \

- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \

- | bfin \

- | c4x | clipper \

- | d10v | d30v | dlx | dsp16xx \

- | fido | fr30 | frv \

- | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \

- | i370 | i860 | i960 | ia64 \

- | ip2k | iq2000 \

- | lm32 \

- | m32c | m32r | m32rle | m68000 | m68k | m88k \

- | maxq | mb | microblaze | mcore | mep | metag \

- | mips | mipsbe | mipseb | mipsel | mipsle \

- | mips16 \

- | mips64 | mips64el \

- | mips64octeon | mips64octeonel \

- | mips64orion | mips64orionel \

- | mips64r5900 | mips64r5900el \

- | mips64vr | mips64vrel \

- | mips64vr4100 | mips64vr4100el \

- | mips64vr4300 | mips64vr4300el \

- | mips64vr5000 | mips64vr5000el \

- | mips64vr5900 | mips64vr5900el \

- | mipsisa32 | mipsisa32el \

- | mipsisa32r2 | mipsisa32r2el \

- | mipsisa64 | mipsisa64el \

- | mipsisa64r2 | mipsisa64r2el \

- | mipsisa64sb1 | mipsisa64sb1el \

- | mipsisa64sr71k | mipsisa64sr71kel \

- | mipstx39 | mipstx39el \

- | mn10200 | mn10300 \

- | moxie \

- | mt \

- | msp430 \

- | nios | nios2 \

- | ns16k | ns32k \

- | or32 \

- | pdp10 | pdp11 | pj | pjl \

- | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \

- | pyramid \

- | rx \

- | score \

- | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \

- | sh64 | sh64le \

- | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \

- | sparcv8 | sparcv9 | sparcv9b | sparcv9v \

- | spu | strongarm \

- | tahoe | thumb | tic4x | tic80 | tron \

- | ubicom32 \

- | v850 | v850e \

- | we32k \

- | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \

- | z8k | z80)

- basic_machine=$basic_machine-unknown

- ;;

- m6811 | m68hc11 | m6812 | m68hc12 | picochip)

- # Motorola 68HC11/12.

- basic_machine=$basic_machine-unknown

- os=-none

- ;;

- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)

- ;;

- ms1)

- basic_machine=mt-unknown

- ;;

-

- # We use `pc' rather than `unknown'

- # because (1) that's what they normally are, and

- # (2) the word "unknown" tends to confuse beginning users.

- i*86 | x86_64)

- basic_machine=$basic_machine-pc

- ;;

- # Object if more than one company name word.

- *-*-*)

- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2

- exit 1

- ;;

- # Recognize the basic CPU types with company name.

- 580-* \

- | a29k-* \

- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \

- | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \

- | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \

- | arm-* | armbe-* | armle-* | armeb-* | armv*-* \

- | avr-* | avr32-* \

- | bfin-* | bs2000-* \

- | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \

- | clipper-* | craynv-* | cydra-* \

- | d10v-* | d30v-* | dlx-* \

- | elxsi-* \

- | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \

- | h8300-* | h8500-* \

- | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \

- | i*86-* | i860-* | i960-* | ia64-* \

- | ip2k-* | iq2000-* \

- | lm32-* \

- | m32c-* | m32r-* | m32rle-* \

- | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \

- | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \

- | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \

- | mips16-* \

- | mips64-* | mips64el-* \

- | mips64octeon-* | mips64octeonel-* \

- | mips64orion-* | mips64orionel-* \

- | mips64r5900-* | mips64r5900el-* \

- | mips64vr-* | mips64vrel-* \

- | mips64vr4100-* | mips64vr4100el-* \

- | mips64vr4300-* | mips64vr4300el-* \

- | mips64vr5000-* | mips64vr5000el-* \

- | mips64vr5900-* | mips64vr5900el-* \

- | mipsisa32-* | mipsisa32el-* \

- | mipsisa32r2-* | mipsisa32r2el-* \

- | mipsisa64-* | mipsisa64el-* \

- | mipsisa64r2-* | mipsisa64r2el-* \

- | mipsisa64sb1-* | mipsisa64sb1el-* \

- | mipsisa64sr71k-* | mipsisa64sr71kel-* \

- | mipstx39-* | mipstx39el-* \

- | mmix-* \

- | mt-* \

- | msp430-* \

- | nios-* | nios2-* \

- | none-* | np1-* | ns16k-* | ns32k-* \

- | orion-* \

- | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \

- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \

- | pyramid-* \

- | romp-* | rs6000-* | rx-* \

- | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \

- | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \

- | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \

- | sparclite-* \

- | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \

- | tahoe-* | thumb-* \

- | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \

- | tron-* \

- | ubicom32-* \

- | v850-* | v850e-* | vax-* \

- | we32k-* \

- | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \

- | xstormy16-* | xtensa*-* \

- | ymp-* \

- | z8k-* | z80-*)

- ;;

- # Recognize the basic CPU types without company name, with glob match.

- xtensa*)

- basic_machine=$basic_machine-unknown

- ;;

- # Recognize the various machine names and aliases which stand

- # for a CPU type and a company and sometimes even an OS.

- 386bsd)

- basic_machine=i386-unknown

- os=-bsd

- ;;

- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)

- basic_machine=m68000-att

- ;;

- 3b*)

- basic_machine=we32k-att

- ;;

- a29khif)

- basic_machine=a29k-amd

- os=-udi

- ;;

- abacus)

- basic_machine=abacus-unknown

- ;;

- adobe68k)

- basic_machine=m68010-adobe

- os=-scout

- ;;

- alliant | fx80)

- basic_machine=fx80-alliant

- ;;

- altos | altos3068)

- basic_machine=m68k-altos

- ;;

- am29k)

- basic_machine=a29k-none

- os=-bsd

- ;;

- amd64)

- basic_machine=x86_64-pc

- ;;

- amd64-*)

- basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`

- ;;

- amdahl)

- basic_machine=580-amdahl

- os=-sysv

- ;;

- amiga | amiga-*)

- basic_machine=m68k-unknown

- ;;

- amigaos | amigados)

- basic_machine=m68k-unknown

- os=-amigaos

- ;;

- amigaunix | amix)

- basic_machine=m68k-unknown

- os=-sysv4

- ;;

- apollo68)

- basic_machine=m68k-apollo

- os=-sysv

- ;;

- apollo68bsd)

- basic_machine=m68k-apollo

- os=-bsd

- ;;

- aros)

- basic_machine=i386-pc

- os=-aros

- ;;

- aux)

- basic_machine=m68k-apple

- os=-aux

- ;;

- balance)

- basic_machine=ns32k-sequent

- os=-dynix

- ;;

- blackfin)

- basic_machine=bfin-unknown

- os=-linux

- ;;

- blackfin-*)

- basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`

- os=-linux

- ;;

- bluegene*)

- basic_machine=powerpc-ibm

- os=-cnk

- ;;

- c90)

- basic_machine=c90-cray

- os=-unicos

- ;;

- cegcc)

- basic_machine=arm-unknown

- os=-cegcc

- ;;

- convex-c1)

- basic_machine=c1-convex

- os=-bsd

- ;;

- convex-c2)

- basic_machine=c2-convex

- os=-bsd

- ;;

- convex-c32)

- basic_machine=c32-convex

- os=-bsd

- ;;

- convex-c34)

- basic_machine=c34-convex

- os=-bsd

- ;;

- convex-c38)

- basic_machine=c38-convex

- os=-bsd

- ;;

- cray | j90)

- basic_machine=j90-cray

- os=-unicos

- ;;

- craynv)

- basic_machine=craynv-cray

- os=-unicosmp

- ;;

- cr16)

- basic_machine=cr16-unknown

- os=-elf

- ;;

- crds | unos)

- basic_machine=m68k-crds

- ;;

- crisv32 | crisv32-* | etraxfs*)

- basic_machine=crisv32-axis

- ;;

- cris | cris-* | etrax*)

- basic_machine=cris-axis

- ;;

- crx)

- basic_machine=crx-unknown

- os=-elf

- ;;

- da30 | da30-*)

- basic_machine=m68k-da30

- ;;

- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)

- basic_machine=mips-dec

- ;;

- decsystem10* | dec10*)

- basic_machine=pdp10-dec

- os=-tops10

- ;;

- decsystem20* | dec20*)

- basic_machine=pdp10-dec

- os=-tops20

- ;;

- delta | 3300 | motorola-3300 | motorola-delta \

- | 3300-motorola | delta-motorola)

- basic_machine=m68k-motorola

- ;;

- delta88)

- basic_machine=m88k-motorola

- os=-sysv3

- ;;

- dicos)

- basic_machine=i686-pc

- os=-dicos

- ;;

- djgpp)

- basic_machine=i586-pc

- os=-msdosdjgpp

- ;;

- dpx20 | dpx20-*)

- basic_machine=rs6000-bull

- os=-bosx

- ;;

- dpx2* | dpx2*-bull)

- basic_machine=m68k-bull

- os=-sysv3

- ;;

- ebmon29k)

- basic_machine=a29k-amd

- os=-ebmon

- ;;

- elxsi)

- basic_machine=elxsi-elxsi

- os=-bsd

- ;;

- encore | umax | mmax)

- basic_machine=ns32k-encore

- ;;

- es1800 | OSE68k | ose68k | ose | OSE)

- basic_machine=m68k-ericsson

- os=-ose

- ;;

- fx2800)

- basic_machine=i860-alliant

- ;;

- genix)

- basic_machine=ns32k-ns

- ;;

- gmicro)

- basic_machine=tron-gmicro

- os=-sysv

- ;;

- go32)

- basic_machine=i386-pc

- os=-go32

- ;;

- h3050r* | hiux*)

- basic_machine=hppa1.1-hitachi

- os=-hiuxwe2

- ;;

- h8300hms)

- basic_machine=h8300-hitachi

- os=-hms

- ;;

- h8300xray)

- basic_machine=h8300-hitachi

- os=-xray

- ;;

- h8500hms)

- basic_machine=h8500-hitachi

- os=-hms

- ;;

- harris)

- basic_machine=m88k-harris

- os=-sysv3

- ;;

- hp300-*)

- basic_machine=m68k-hp

- ;;

- hp300bsd)

- basic_machine=m68k-hp

- os=-bsd

- ;;

- hp300hpux)

- basic_machine=m68k-hp

- os=-hpux

- ;;

- hp3k9[0-9][0-9] | hp9[0-9][0-9])

- basic_machine=hppa1.0-hp

- ;;

- hp9k2[0-9][0-9] | hp9k31[0-9])

- basic_machine=m68000-hp

- ;;

- hp9k3[2-9][0-9])

- basic_machine=m68k-hp

- ;;

- hp9k6[0-9][0-9] | hp6[0-9][0-9])

- basic_machine=hppa1.0-hp

- ;;

- hp9k7[0-79][0-9] | hp7[0-79][0-9])

- basic_machine=hppa1.1-hp

- ;;

- hp9k78[0-9] | hp78[0-9])

- # FIXME: really hppa2.0-hp

- basic_machine=hppa1.1-hp

- ;;

- hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)

- # FIXME: really hppa2.0-hp

- basic_machine=hppa1.1-hp

- ;;

- hp9k8[0-9][13679] | hp8[0-9][13679])

- basic_machine=hppa1.1-hp

- ;;

- hp9k8[0-9][0-9] | hp8[0-9][0-9])

- basic_machine=hppa1.0-hp

- ;;

- hppa-next)

- os=-nextstep3

- ;;

- hppaosf)

- basic_machine=hppa1.1-hp

- os=-osf

- ;;

- hppro)

- basic_machine=hppa1.1-hp

- os=-proelf

- ;;

- i370-ibm* | ibm*)

- basic_machine=i370-ibm

- ;;

-# I'm not sure what "Sysv32" means. Should this be sysv3.2?

- i*86v32)

- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`

- os=-sysv32

- ;;

- i*86v4*)

- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`

- os=-sysv4

- ;;

- i*86v)

- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`

- os=-sysv

- ;;

- i*86sol2)

- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`

- os=-solaris2

- ;;

- i386mach)

- basic_machine=i386-mach

- os=-mach

- ;;

- i386-vsta | vsta)

- basic_machine=i386-unknown

- os=-vsta

- ;;

- iris | iris4d)

- basic_machine=mips-sgi

- case $os in

- -irix*)

- ;;

- *)

- os=-irix4

- ;;

- esac

- ;;

- isi68 | isi)

- basic_machine=m68k-isi

- os=-sysv

- ;;

- m68knommu)

- basic_machine=m68k-unknown

- os=-linux

- ;;

- m68knommu-*)

- basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`

- os=-linux

- ;;

- m88k-omron*)

- basic_machine=m88k-omron

- ;;

- magnum | m3230)

- basic_machine=mips-mips

- os=-sysv

- ;;

- merlin)

- basic_machine=ns32k-utek

- os=-sysv

- ;;

- microblaze)

- basic_machine=microblaze-xilinx

- ;;

- mingw32)

- basic_machine=i386-pc

- os=-mingw32

- ;;

- mingw32ce)

- basic_machine=arm-unknown

- os=-mingw32ce

- ;;

- miniframe)

- basic_machine=m68000-convergent

- ;;

- *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)

- basic_machine=m68k-atari

- os=-mint

- ;;

- mips3*-*)

- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`

- ;;

- mips3*)

- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown

- ;;

- monitor)

- basic_machine=m68k-rom68k

- os=-coff

- ;;

- morphos)

- basic_machine=powerpc-unknown

- os=-morphos

- ;;

- msdos)

- basic_machine=i386-pc

- os=-msdos

- ;;

- ms1-*)

- basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`

- ;;

- mvs)

- basic_machine=i370-ibm

- os=-mvs

- ;;

- ncr3000)

- basic_machine=i486-ncr

- os=-sysv4

- ;;

- netbsd386)

- basic_machine=i386-unknown

- os=-netbsd

- ;;

- netwinder)

- basic_machine=armv4l-rebel

- os=-linux

- ;;

- news | news700 | news800 | news900)

- basic_machine=m68k-sony

- os=-newsos

- ;;

- news1000)

- basic_machine=m68030-sony

- os=-newsos

- ;;

- news-3600 | risc-news)

- basic_machine=mips-sony

- os=-newsos

- ;;

- necv70)

- basic_machine=v70-nec

- os=-sysv

- ;;

- next | m*-next )

- basic_machine=m68k-next

- case $os in

- -nextstep* )

- ;;

- -ns2*)

- os=-nextstep2

- ;;

- *)

- os=-nextstep3

- ;;

- esac

- ;;

- nh3000)

- basic_machine=m68k-harris

- os=-cxux

- ;;

- nh[45]000)

- basic_machine=m88k-harris

- os=-cxux

- ;;

- nindy960)

- basic_machine=i960-intel

- os=-nindy

- ;;

- mon960)

- basic_machine=i960-intel

- os=-mon960

- ;;

- nonstopux)

- basic_machine=mips-compaq

- os=-nonstopux

- ;;

- np1)

- basic_machine=np1-gould

- ;;

- nsr-tandem)

- basic_machine=nsr-tandem

- ;;

- op50n-* | op60c-*)

- basic_machine=hppa1.1-oki

- os=-proelf

- ;;

- openrisc | openrisc-*)

- basic_machine=or32-unknown

- ;;

- os400)

- basic_machine=powerpc-ibm

- os=-os400

- ;;

- OSE68000 | ose68000)

- basic_machine=m68000-ericsson

- os=-ose

- ;;

- os68k)

- basic_machine=m68k-none

- os=-os68k

- ;;

- pa-hitachi)

- basic_machine=hppa1.1-hitachi

- os=-hiuxwe2

- ;;

- paragon)

- basic_machine=i860-intel

- os=-osf

- ;;

- parisc)

- basic_machine=hppa-unknown

- os=-linux

- ;;

- parisc-*)

- basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`

- os=-linux

- ;;

- pbd)

- basic_machine=sparc-tti

- ;;

- pbb)

- basic_machine=m68k-tti

- ;;

- pc532 | pc532-*)

- basic_machine=ns32k-pc532

- ;;

- pc98)

- basic_machine=i386-pc

- ;;

- pc98-*)

- basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`

- ;;

- pentium | p5 | k5 | k6 | nexgen | viac3)

- basic_machine=i586-pc

- ;;

- pentiumpro | p6 | 6x86 | athlon | athlon_*)

- basic_machine=i686-pc

- ;;

- pentiumii | pentium2 | pentiumiii | pentium3)

- basic_machine=i686-pc

- ;;

- pentium4)

- basic_machine=i786-pc

- ;;

- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)

- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`

- ;;

- pentiumpro-* | p6-* | 6x86-* | athlon-*)

- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`

- ;;

- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)

- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`

- ;;

- pentium4-*)

- basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`

- ;;

- pn)

- basic_machine=pn-gould

- ;;

- power) basic_machine=power-ibm

- ;;

- ppc) basic_machine=powerpc-unknown

- ;;

- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`

- ;;

- ppcle | powerpclittle | ppc-le | powerpc-little)

- basic_machine=powerpcle-unknown

- ;;

- ppcle-* | powerpclittle-*)

- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`

- ;;

- ppc64) basic_machine=powerpc64-unknown

- ;;

- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`

- ;;

- ppc64le | powerpc64little | ppc64-le | powerpc64-little)

- basic_machine=powerpc64le-unknown

- ;;

- ppc64le-* | powerpc64little-*)

- basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`

- ;;

- ps2)

- basic_machine=i386-ibm

- ;;

- pw32)

- basic_machine=i586-unknown

- os=-pw32

- ;;

- rdos)

- basic_machine=i386-pc

- os=-rdos

- ;;

- rom68k)

- basic_machine=m68k-rom68k

- os=-coff

- ;;

- rm[46]00)

- basic_machine=mips-siemens

- ;;

- rtpc | rtpc-*)

- basic_machine=romp-ibm

- ;;

- s390 | s390-*)

- basic_machine=s390-ibm

- ;;

- s390x | s390x-*)

- basic_machine=s390x-ibm

- ;;

- sa29200)

- basic_machine=a29k-amd

- os=-udi

- ;;

- sb1)

- basic_machine=mipsisa64sb1-unknown

- ;;

- sb1el)

- basic_machine=mipsisa64sb1el-unknown

- ;;

- sde)

- basic_machine=mipsisa32-sde

- os=-elf

- ;;

- sei)

- basic_machine=mips-sei

- os=-seiux

- ;;

- sequent)

- basic_machine=i386-sequent

- ;;

- sh)

- basic_machine=sh-hitachi

- os=-hms

- ;;

- sh5el)

- basic_machine=sh5le-unknown

- ;;

- sh64)

- basic_machine=sh64-unknown

- ;;

- sparclite-wrs | simso-wrs)

- basic_machine=sparclite-wrs

- os=-vxworks

- ;;

- sps7)

- basic_machine=m68k-bull

- os=-sysv2

- ;;

- spur)

- basic_machine=spur-unknown

- ;;

- st2000)

- basic_machine=m68k-tandem

- ;;

- stratus)

- basic_machine=i860-stratus

- os=-sysv4

- ;;

- sun2)

- basic_machine=m68000-sun

- ;;

- sun2os3)

- basic_machine=m68000-sun

- os=-sunos3

- ;;

- sun2os4)

- basic_machine=m68000-sun

- os=-sunos4

- ;;

- sun3os3)

- basic_machine=m68k-sun

- os=-sunos3

- ;;

- sun3os4)

- basic_machine=m68k-sun

- os=-sunos4

- ;;

- sun4os3)

- basic_machine=sparc-sun

- os=-sunos3

- ;;

- sun4os4)

- basic_machine=sparc-sun

- os=-sunos4

- ;;

- sun4sol2)

- basic_machine=sparc-sun

- os=-solaris2

- ;;

- sun3 | sun3-*)

- basic_machine=m68k-sun

- ;;

- sun4)

- basic_machine=sparc-sun

- ;;

- sun386 | sun386i | roadrunner)

- basic_machine=i386-sun

- ;;

- sv1)

- basic_machine=sv1-cray

- os=-unicos

- ;;

- symmetry)

- basic_machine=i386-sequent

- os=-dynix

- ;;

- t3e)

- basic_machine=alphaev5-cray

- os=-unicos

- ;;

- t90)

- basic_machine=t90-cray

- os=-unicos

- ;;

- tic54x | c54x*)

- basic_machine=tic54x-unknown

- os=-coff

- ;;

- tic55x | c55x*)

- basic_machine=tic55x-unknown

- os=-coff

- ;;

- tic6x | c6x*)

- basic_machine=tic6x-unknown

- os=-coff

- ;;

- tile*)

- basic_machine=tile-unknown

- os=-linux-gnu

- ;;

- tx39)

- basic_machine=mipstx39-unknown

- ;;

- tx39el)

- basic_machine=mipstx39el-unknown

- ;;

- toad1)

- basic_machine=pdp10-xkl

- os=-tops20

- ;;

- tower | tower-32)

- basic_machine=m68k-ncr

- ;;

- tpf)

- basic_machine=s390x-ibm

- os=-tpf

- ;;

- udi29k)

- basic_machine=a29k-amd

- os=-udi

- ;;

- ultra3)

- basic_machine=a29k-nyu

- os=-sym1

- ;;

- v810 | necv810)

- basic_machine=v810-nec

- os=-none

- ;;

- vaxv)

- basic_machine=vax-dec

- os=-sysv

- ;;

- vms)

- basic_machine=vax-dec

- os=-vms

- ;;

- vpp*|vx|vx-*)

- basic_machine=f301-fujitsu

- ;;

- vxworks960)

- basic_machine=i960-wrs

- os=-vxworks

- ;;

- vxworks68)

- basic_machine=m68k-wrs

- os=-vxworks

- ;;

- vxworks29k)

- basic_machine=a29k-wrs

- os=-vxworks

- ;;

- w65*)

- basic_machine=w65-wdc

- os=-none

- ;;

- w89k-*)

- basic_machine=hppa1.1-winbond

- os=-proelf

- ;;

- xbox)

- basic_machine=i686-pc

- os=-mingw32

- ;;

- xps | xps100)

- basic_machine=xps100-honeywell

- ;;

- ymp)

- basic_machine=ymp-cray

- os=-unicos

- ;;

- z8k-*-coff)

- basic_machine=z8k-unknown

- os=-sim

- ;;

- z80-*-coff)

- basic_machine=z80-unknown

- os=-sim

- ;;

- none)

- basic_machine=none-none

- os=-none

- ;;

-

-# Here we handle the default manufacturer of certain CPU types. It is in

-# some cases the only manufacturer, in others, it is the most popular.

- w89k)

- basic_machine=hppa1.1-winbond

- ;;

- op50n)

- basic_machine=hppa1.1-oki

- ;;

- op60c)

- basic_machine=hppa1.1-oki

- ;;

- romp)

- basic_machine=romp-ibm

- ;;

- mmix)

- basic_machine=mmix-knuth

- ;;

- rs6000)

- basic_machine=rs6000-ibm

- ;;

- vax)

- basic_machine=vax-dec

- ;;

- pdp10)

- # there are many clones, so DEC is not a safe bet

- basic_machine=pdp10-unknown

- ;;

- pdp11)

- basic_machine=pdp11-dec

- ;;

- we32k)

- basic_machine=we32k-att

- ;;

- sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)

- basic_machine=sh-unknown

- ;;

- sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)

- basic_machine=sparc-sun

- ;;

- cydra)

- basic_machine=cydra-cydrome

- ;;

- orion)

- basic_machine=orion-highlevel

- ;;

- orion105)

- basic_machine=clipper-highlevel

- ;;

- mac | mpw | mac-mpw)

- basic_machine=m68k-apple

- ;;

- pmac | pmac-mpw)

- basic_machine=powerpc-apple

- ;;

- *-unknown)

- # Make sure to match an already-canonicalized machine name.

- ;;

- *)

- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2

- exit 1

- ;;

-esac

-

-# Here we canonicalize certain aliases for manufacturers.

-case $basic_machine in

- *-digital*)

- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`

- ;;

- *-commodore*)

- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`

- ;;

- *)

- ;;

-esac

-

-# Decode manufacturer-specific aliases for certain operating systems.

-

-if [ x"$os" != x"" ]

-then

-case $os in

- # First match some system type aliases

- # that might get confused with valid system types.

- # -solaris* is a basic system type, with this one exception.

- -auroraux)

- os=-auroraux

- ;;

- -solaris1 | -solaris1.*)

- os=`echo $os | sed -e 's|solaris1|sunos4|'`

- ;;

- -solaris)

- os=-solaris2

- ;;

- -svr4*)

- os=-sysv4

- ;;

- -unixware*)

- os=-sysv4.2uw

- ;;

- -gnu/linux*)

- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`

- ;;

- # First accept the basic system types.

- # The portable systems comes first.

- # Each alternative MUST END IN A *, to match a version number.

- # -sysv* is not here because it comes later, after sysvr4.

- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \

- | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\

- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \

- | -sym* | -kopensolaris* \

- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \

- | -aos* | -aros* \

- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \

- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \

- | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \

- | -openbsd* | -solidbsd* \

- | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \

- | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \

- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \

- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \

- | -chorusos* | -chorusrdb* | -cegcc* \

- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \

- | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \

- | -uxpv* | -beos* | -mpeix* | -udk* \

- | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \

- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \

- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \

- | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \

- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \

- | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \

- | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)

- # Remember, each alternative MUST END IN *, to match a version number.

- ;;

- -qnx*)

- case $basic_machine in

- x86-* | i*86-*)

- ;;

- *)

- os=-nto$os

- ;;

- esac

- ;;

- -nto-qnx*)

- ;;

- -nto*)

- os=`echo $os | sed -e 's|nto|nto-qnx|'`

- ;;

- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \

- | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \

- | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)

- ;;

- -mac*)

- os=`echo $os | sed -e 's|mac|macos|'`

- ;;

- -linux-dietlibc)

- os=-linux-dietlibc

- ;;

- -linux*)

- os=`echo $os | sed -e 's|linux|linux-gnu|'`

- ;;

- -sunos5*)

- os=`echo $os | sed -e 's|sunos5|solaris2|'`

- ;;

- -sunos6*)

- os=`echo $os | sed -e 's|sunos6|solaris3|'`

- ;;

- -opened*)

- os=-openedition

- ;;

- -os400*)

- os=-os400

- ;;

- -wince*)

- os=-wince

- ;;

- -osfrose*)

- os=-osfrose

- ;;

- -osf*)

- os=-osf

- ;;

- -utek*)

- os=-bsd

- ;;

- -dynix*)

- os=-bsd

- ;;

- -acis*)

- os=-aos

- ;;

- -atheos*)

- os=-atheos

- ;;

- -syllable*)

- os=-syllable

- ;;

- -386bsd)

- os=-bsd

- ;;

- -ctix* | -uts*)

- os=-sysv

- ;;

- -nova*)

- os=-rtmk-nova

- ;;

- -ns2 )

- os=-nextstep2

- ;;

- -nsk*)

- os=-nsk

- ;;

- # Preserve the version number of sinix5.

- -sinix5.*)

- os=`echo $os | sed -e 's|sinix|sysv|'`

- ;;

- -sinix*)

- os=-sysv4

- ;;

- -tpf*)

- os=-tpf

- ;;

- -triton*)

- os=-sysv3

- ;;

- -oss*)

- os=-sysv3

- ;;

- -svr4)

- os=-sysv4

- ;;

- -svr3)

- os=-sysv3

- ;;

- -sysvr4)

- os=-sysv4

- ;;

- # This must come after -sysvr4.

- -sysv*)

- ;;

- -ose*)

- os=-ose

- ;;

- -es1800*)

- os=-ose

- ;;

- -xenix)

- os=-xenix

- ;;

- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)

- os=-mint

- ;;

- -aros*)

- os=-aros

- ;;

- -kaos*)

- os=-kaos

- ;;

- -zvmoe)

- os=-zvmoe

- ;;

- -dicos*)

- os=-dicos

- ;;

- -none)

- ;;

- *)

- # Get rid of the `-' at the beginning of $os.

- os=`echo $os | sed 's/[^-]*-//'`

- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2

- exit 1

- ;;

-esac

-else

-

-# Here we handle the default operating systems that come with various machines.

-# The value should be what the vendor currently ships out the door with their

-# machine or put another way, the most popular os provided with the machine.

-

-# Note that if you're going to try to match "-MANUFACTURER" here (say,

-# "-sun"), then you have to tell the case statement up towards the top

-# that MANUFACTURER isn't an operating system. Otherwise, code above

-# will signal an error saying that MANUFACTURER isn't an operating

-# system, and we'll never get to this point.

-

-case $basic_machine in

- score-*)

- os=-elf

- ;;

- spu-*)

- os=-elf

- ;;

- *-acorn)

- os=-riscix1.2

- ;;

- arm*-rebel)

- os=-linux

- ;;

- arm*-semi)

- os=-aout

- ;;

- c4x-* | tic4x-*)

- os=-coff

- ;;

- # This must come before the *-dec entry.

- pdp10-*)

- os=-tops20

- ;;

- pdp11-*)

- os=-none

- ;;

- *-dec | vax-*)

- os=-ultrix4.2

- ;;

- m68*-apollo)

- os=-domain

- ;;

- i386-sun)

- os=-sunos4.0.2

- ;;

- m68000-sun)

- os=-sunos3

- # This also exists in the configure program, but was not the

- # default.

- # os=-sunos4

- ;;

- m68*-cisco)

- os=-aout

- ;;

- mep-*)

- os=-elf

- ;;

- mips*-cisco)

- os=-elf

- ;;

- mips*-*)

- os=-elf

- ;;

- or32-*)

- os=-coff

- ;;

- *-tti) # must be before sparc entry or we get the wrong os.

- os=-sysv3

- ;;

- sparc-* | *-sun)

- os=-sunos4.1.1

- ;;

- *-be)

- os=-beos

- ;;

- *-haiku)

- os=-haiku

- ;;

- *-ibm)

- os=-aix

- ;;

- *-knuth)

- os=-mmixware

- ;;

- *-wec)

- os=-proelf

- ;;

- *-winbond)

- os=-proelf

- ;;

- *-oki)

- os=-proelf

- ;;

- *-hp)

- os=-hpux

- ;;

- *-hitachi)

- os=-hiux

- ;;

- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)

- os=-sysv

- ;;

- *-cbm)

- os=-amigaos

- ;;

- *-dg)

- os=-dgux

- ;;

- *-dolphin)

- os=-sysv3

- ;;

- m68k-ccur)

- os=-rtu

- ;;

- m88k-omron*)

- os=-luna

- ;;

- *-next )

- os=-nextstep

- ;;

- *-sequent)

- os=-ptx

- ;;

- *-crds)

- os=-unos

- ;;

- *-ns)

- os=-genix

- ;;

- i370-*)

- os=-mvs

- ;;

- *-next)

- os=-nextstep3

- ;;

- *-gould)

- os=-sysv

- ;;

- *-highlevel)

- os=-bsd

- ;;

- *-encore)

- os=-bsd

- ;;

- *-sgi)

- os=-irix

- ;;

- *-siemens)

- os=-sysv4

- ;;

- *-masscomp)

- os=-rtu

- ;;

- f30[01]-fujitsu | f700-fujitsu)

- os=-uxpv

- ;;

- *-rom68k)

- os=-coff

- ;;

- *-*bug)

- os=-coff

- ;;

- *-apple)

- os=-macos

- ;;

- *-atari*)

- os=-mint

- ;;

- *)

- os=-none

- ;;

-esac

-fi

-

-# Here we handle the case where we know the os, and the CPU type, but not the

-# manufacturer. We pick the logical manufacturer.

-vendor=unknown

-case $basic_machine in

- *-unknown)

- case $os in

- -riscix*)

- vendor=acorn

- ;;

- -sunos*)

- vendor=sun

- ;;

- -cnk*|-aix*)

- vendor=ibm

- ;;

- -beos*)

- vendor=be

- ;;

- -hpux*)

- vendor=hp

- ;;

- -mpeix*)

- vendor=hp

- ;;

- -hiux*)

- vendor=hitachi

- ;;

- -unos*)

- vendor=crds

- ;;

- -dgux*)

- vendor=dg

- ;;

- -luna*)

- vendor=omron

- ;;

- -genix*)

- vendor=ns

- ;;

- -mvs* | -opened*)

- vendor=ibm

- ;;

- -os400*)

- vendor=ibm

- ;;

- -ptx*)

- vendor=sequent

- ;;

- -tpf*)

- vendor=ibm

- ;;

- -vxsim* | -vxworks* | -windiss*)

- vendor=wrs

- ;;

- -aux*)

- vendor=apple

- ;;

- -hms*)

- vendor=hitachi

- ;;

- -mpw* | -macos*)

- vendor=apple

- ;;

- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)

- vendor=atari

- ;;

- -vos*)

- vendor=stratus

- ;;

- esac

- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`

- ;;

-esac

-

-echo $basic_machine$os

-exit

-

-# Local variables:

-# eval: (add-hook 'write-file-hooks 'time-stamp)

-# time-stamp-start: "timestamp='"

-# time-stamp-format: "%:y-%02m-%02d"

-# time-stamp-end: "'"

-# End:

-# Makefile.in generated by automake 1.11.1 from Makefile.am.

-# @configure_input@

-

-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,

-# Inc.

-# This Makefile.in is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# This program is distributed in the hope that it will be useful,

-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

-# PARTICULAR PURPOSE.

-

-@SET_MAKE@

-

-

-VPATH = @srcdir@

-pkgdatadir = $(datadir)/@PACKAGE@

-pkgincludedir = $(includedir)/@PACKAGE@

-pkglibdir = $(libdir)/@PACKAGE@

-pkglibexecdir = $(libexecdir)/@PACKAGE@

-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

-install_sh_DATA = $(install_sh) -c -m 644

-install_sh_PROGRAM = $(install_sh) -c

-install_sh_SCRIPT = $(install_sh) -c

-INSTALL_HEADER = $(INSTALL_DATA)

-transform = $(program_transform_name)

-NORMAL_INSTALL = :

-PRE_INSTALL = :

-POST_INSTALL = :

-NORMAL_UNINSTALL = :

-PRE_UNINSTALL = :

-POST_UNINSTALL = :

-build_triplet = @build@

-host_triplet = @host@

-@USE_MATE_WM_TRUE@am__append_1 = mate-wm.desktop.in

-subdir = data

-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \

- $(srcdir)/mate-session-properties.desktop.in.in \

- $(srcdir)/mate-wm.desktop.in.in

-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

-am__aclocal_m4_deps = $(top_srcdir)/m4/intltool.m4 \

- $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \

- $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \

- $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac

-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

- $(ACLOCAL_M4)

-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs

-CONFIG_HEADER = $(top_builddir)/config.h

-CONFIG_CLEAN_FILES = mate-wm.desktop.in \

- mate-session-properties.desktop.in

-CONFIG_CLEAN_VPATH_FILES =

-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;

-am__vpath_adj = case $$p in \

- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \

- *) f=$$p;; \

- esac;

-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;

-am__install_max = 40

-am__nobase_strip_setup = \

- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`

-am__nobase_strip = \

- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"

-am__nobase_list = $(am__nobase_strip_setup); \

- for p in $$list; do echo "$$p $$p"; done | \

- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \

- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \

- if (++n[$$2] == $(am__install_max)) \

- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \

- END { for (dir in files) print dir, files[dir] }'

-am__base_list = \

- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \

- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'

-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(desktopdir)" \

- "$(DESTDIR)$(schemasdir)" "$(DESTDIR)$(uidir)" \

- "$(DESTDIR)$(xsessiondir)"

-SCRIPTS = $(bin_SCRIPTS)

-AM_V_GEN = $(am__v_GEN_$(V))

-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))

-am__v_GEN_0 = @echo " GEN " $@;

-AM_V_at = $(am__v_at_$(V))

-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))

-am__v_at_0 = @

-SOURCES =

-DIST_SOURCES =

-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \

- html-recursive info-recursive install-data-recursive \

- install-dvi-recursive install-exec-recursive \

- install-html-recursive install-info-recursive \

- install-pdf-recursive install-ps-recursive install-recursive \

- installcheck-recursive installdirs-recursive pdf-recursive \

- ps-recursive uninstall-recursive

-DATA = $(desktop_DATA) $(schemas_DATA) $(ui_DATA) $(xsession_DATA)

-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \

- distclean-recursive maintainer-clean-recursive

-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \

- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \

- distdir

-ETAGS = etags

-CTAGS = ctags

-DIST_SUBDIRS = $(SUBDIRS)

-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

-am__relativize = \

- dir0=`pwd`; \

- sed_first='s,^\([^/]*\)/.*$$,\1,'; \

- sed_rest='s,^[^/]*/*,,'; \

- sed_last='s,^.*/\([^/]*\)$$,\1,'; \

- sed_butlast='s,/*[^/]*$$,,'; \

- while test -n "$$dir1"; do \

- first=`echo "$$dir1" | sed -e "$$sed_first"`; \

- if test "$$first" != "."; then \

- if test "$$first" = ".."; then \

- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \

- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \

- else \

- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \

- if test "$$first2" = "$$first"; then \

- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \

- else \

- dir2="../$$dir2"; \

- fi; \

- dir0="$$dir0"/"$$first"; \

- fi; \

- fi; \

- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \

- done; \

- reldir="$$dir2"

-ACLOCAL = @ACLOCAL@

-ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@

-ALL_LINGUAS = @ALL_LINGUAS@

-AMTAR = @AMTAR@

-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@

-AR = @AR@

-AUTOCONF = @AUTOCONF@

-AUTOHEADER = @AUTOHEADER@

-AUTOMAKE = @AUTOMAKE@

-AWK = @AWK@

-CATALOGS = @CATALOGS@

-CATOBJEXT = @CATOBJEXT@

-CC = @CC@

-CCDEPMODE = @CCDEPMODE@

-CFLAGS = @CFLAGS@

-CPP = @CPP@

-CPPFLAGS = @CPPFLAGS@

-CYGPATH_W = @CYGPATH_W@

-DATADIRNAME = @DATADIRNAME@

-DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@

-DBUS_GLIB_LIBS = @DBUS_GLIB_LIBS@

-DEFAULT_WM = @DEFAULT_WM@

-DEFS = @DEFS@

-DEPDIR = @DEPDIR@

-DISABLE_DEPRECATED = @DISABLE_DEPRECATED@

-DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@

-DLLTOOL = @DLLTOOL@

-DSYMUTIL = @DSYMUTIL@

-DUMPBIN = @DUMPBIN@

-ECHO_C = @ECHO_C@

-ECHO_N = @ECHO_N@

-ECHO_T = @ECHO_T@

-EGG_SMCLIENT_CFLAGS = @EGG_SMCLIENT_CFLAGS@

-EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@

-EGREP = @EGREP@

-EXECINFO_LIBS = @EXECINFO_LIBS@

-EXEEXT = @EXEEXT@

-FGREP = @FGREP@

-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@

-GLIB_GENMARSHAL = @GLIB_GENMARSHAL@

-GMOFILES = @GMOFILES@

-GMSGFMT = @GMSGFMT@

-GREP = @GREP@

-HAVE_XRENDER = @HAVE_XRENDER@

-HAVE_XTEST = @HAVE_XTEST@

-ICE_CFLAGS = @ICE_CFLAGS@

-ICE_LIBS = @ICE_LIBS@

-INSTALL = @INSTALL@

-INSTALL_DATA = @INSTALL_DATA@

-INSTALL_PROGRAM = @INSTALL_PROGRAM@

-INSTALL_SCRIPT = @INSTALL_SCRIPT@

-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

-INSTOBJEXT = @INSTOBJEXT@

-INTLLIBS = @INTLLIBS@

-INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@

-INTLTOOL_MERGE = @INTLTOOL_MERGE@

-INTLTOOL_PERL = @INTLTOOL_PERL@

-INTLTOOL_UPDATE = @INTLTOOL_UPDATE@

-LD = @LD@

-LDFLAGS = @LDFLAGS@

-LIBOBJS = @LIBOBJS@

-LIBS = @LIBS@

-LIBTOOL = @LIBTOOL@

-LIPO = @LIPO@

-LN_S = @LN_S@

-LTLIBOBJS = @LTLIBOBJS@

-MAINT = @MAINT@

-MAKEINFO = @MAKEINFO@

-MANIFEST_TOOL = @MANIFEST_TOOL@

-MATECONFTOOL = @MATECONFTOOL@

-MATECONF_CFLAGS = @MATECONF_CFLAGS@

-MATECONF_LIBS = @MATECONF_LIBS@

-MATECONF_SANITY_CHECK = @MATECONF_SANITY_CHECK@

-MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@

-MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@

-MATE_SESSION_CFLAGS = @MATE_SESSION_CFLAGS@

-MATE_SESSION_LIBS = @MATE_SESSION_LIBS@

-MKDIR_P = @MKDIR_P@

-MKINSTALLDIRS = @MKINSTALLDIRS@

-MSGFMT = @MSGFMT@

-MSGFMT_OPTS = @MSGFMT_OPTS@

-MSGMERGE = @MSGMERGE@

-NM = @NM@

-NMEDIT = @NMEDIT@

-OBJDUMP = @OBJDUMP@

-OBJEXT = @OBJEXT@

-OTOOL = @OTOOL@

-OTOOL64 = @OTOOL64@

-PACKAGE = @PACKAGE@

-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

-PACKAGE_NAME = @PACKAGE_NAME@

-PACKAGE_STRING = @PACKAGE_STRING@

-PACKAGE_TARNAME = @PACKAGE_TARNAME@

-PACKAGE_URL = @PACKAGE_URL@

-PACKAGE_VERSION = @PACKAGE_VERSION@

-PATH_SEPARATOR = @PATH_SEPARATOR@

-PERL = @PERL@

-PKG_CONFIG = @PKG_CONFIG@

-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@

-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@

-POFILES = @POFILES@

-POSUB = @POSUB@

-PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@

-PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@

-RANLIB = @RANLIB@

-REBUILD = @REBUILD@

-SED = @SED@

-SESSION_PROPERTIES_CFLAGS = @SESSION_PROPERTIES_CFLAGS@

-SESSION_PROPERTIES_LIBS = @SESSION_PROPERTIES_LIBS@

-SET_MAKE = @SET_MAKE@

-SHELL = @SHELL@

-SM_CFLAGS = @SM_CFLAGS@

-SM_LIBS = @SM_LIBS@

-STRIP = @STRIP@

-USE_NLS = @USE_NLS@

-VERSION = @VERSION@

-WARN_CFLAGS = @WARN_CFLAGS@

-XEXT_CFLAGS = @XEXT_CFLAGS@

-XEXT_LIBS = @XEXT_LIBS@

-XGETTEXT = @XGETTEXT@

-XMKMF = @XMKMF@

-XMLTO = @XMLTO@

-XRENDER_CFLAGS = @XRENDER_CFLAGS@

-XRENDER_LIBS = @XRENDER_LIBS@

-XSLTPROC = @XSLTPROC@

-XTEST_CFLAGS = @XTEST_CFLAGS@

-XTEST_LIBS = @XTEST_LIBS@

-X_CFLAGS = @X_CFLAGS@

-X_EXTRA_LIBS = @X_EXTRA_LIBS@

-X_LIBS = @X_LIBS@

-X_PRE_LIBS = @X_PRE_LIBS@

-abs_builddir = @abs_builddir@

-abs_srcdir = @abs_srcdir@

-abs_top_builddir = @abs_top_builddir@

-abs_top_srcdir = @abs_top_srcdir@

-ac_ct_AR = @ac_ct_AR@

-ac_ct_CC = @ac_ct_CC@

-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@

-am__include = @am__include@

-am__leading_dot = @am__leading_dot@

-am__quote = @am__quote@

-am__tar = @am__tar@

-am__untar = @am__untar@

-bindir = @bindir@

-build = @build@

-build_alias = @build_alias@

-build_cpu = @build_cpu@

-build_os = @build_os@

-build_vendor = @build_vendor@

-builddir = @builddir@

-datadir = @datadir@

-datarootdir = @datarootdir@

-docdir = @docdir@

-dvidir = @dvidir@

-exec_prefix = @exec_prefix@

-host = @host@

-host_alias = @host_alias@

-host_cpu = @host_cpu@

-host_os = @host_os@

-host_vendor = @host_vendor@

-htmldir = @htmldir@

-includedir = @includedir@

-infodir = @infodir@

-install_sh = @install_sh@

-libdir = @libdir@

-libexecdir = @libexecdir@

-localedir = @localedir@

-localstatedir = @localstatedir@

-mandir = @mandir@

-mkdir_p = @mkdir_p@

-oldincludedir = @oldincludedir@

-pdfdir = @pdfdir@

-prefix = @prefix@

-program_transform_name = @program_transform_name@

-psdir = @psdir@

-sbindir = @sbindir@

-sharedstatedir = @sharedstatedir@

-srcdir = @srcdir@

-sysconfdir = @sysconfdir@

-target_alias = @target_alias@

-top_build_prefix = @top_build_prefix@

-top_builddir = @top_builddir@

-top_srcdir = @top_srcdir@

-SUBDIRS = icons

-bin_SCRIPTS = mate-wm

-uidir = $(pkgdatadir)

-ui_DATA = \

- session-properties.ui \

- gsm-inhibit-dialog.ui

-

-xsessiondir = $(datadir)/xsessions

-xsession_in_files = mate.desktop.in

-xsession_DATA = $(xsession_in_files:.desktop.in=.desktop)

-desktopdir = $(datadir)/applications

-desktop_in_files = mate-session-properties.desktop.in $(am__append_1)

-desktop_DATA = $(desktop_in_files:.desktop.in=.desktop)

-schemas_in_in_files = mate-session.schemas.in.in

-schemas_in_files = $(schemas_in_in_files:.schemas.in.in=.schemas.in)

-schemasdir = $(MATECONF_SCHEMA_FILE_DIR)

-schemas_DATA = $(schemas_in_files:.schemas.in=.schemas)

-EXTRA_DIST = \

- mate-wm \

- $(xsession_in_files) \

- $(schemas_in_in_files) \

- $(ui_DATA) \

- $(pixmap_DATA_dist)

-

-CLEANFILES = \

- $(schemas_in_files) \

- $(schemas_DATA) \

- $(xsession_DATA) \

- $(desktop_DATA) \

- mate-wm.desktop

-

-DISTCLEANFILES = \

- $(desktop_in_files)

-

-all: all-recursive

-

-.SUFFIXES:

-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)

- @for dep in $?; do \

- case '$(am__configure_deps)' in \

- *$$dep*) \

- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \

- && { if test -f $@; then exit 0; else break; fi; }; \

- exit 1;; \

- esac; \

- done; \

- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu data/Makefile'; \

- $(am__cd) $(top_srcdir) && \

- $(AUTOMAKE) --gnu data/Makefile

-.PRECIOUS: Makefile

-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

- @case '$?' in \

- *config.status*) \

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \

- *) \

- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \

- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \

- esac;

-

-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

-

-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

-$(am__aclocal_m4_deps):

-mate-wm.desktop.in: $(top_builddir)/config.status $(srcdir)/mate-wm.desktop.in.in

- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

-mate-session-properties.desktop.in: $(top_builddir)/config.status $(srcdir)/mate-session-properties.desktop.in.in

- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

-install-binSCRIPTS: $(bin_SCRIPTS)

- @$(NORMAL_INSTALL)

- test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"

- @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \

- for p in $$list; do \

- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \

- if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \

- done | \

- sed -e 'p;s,.*/,,;n' \

- -e 'h;s|.*|.|' \

- -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \

- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \

- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \

- if ($$2 == $$4) { files[d] = files[d] " " $$1; \

- if (++n[d] == $(am__install_max)) { \

- print "f", d, files[d]; n[d] = 0; files[d] = "" } } \

- else { print "f", d "/" $$4, $$1 } } \

- END { for (d in files) print "f", d, files[d] }' | \

- while read type dir files; do \

- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \

- test -z "$$files" || { \

- echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \

- $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \

- } \

- ; done

-

-uninstall-binSCRIPTS:

- @$(NORMAL_UNINSTALL)

- @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \

- files=`for p in $$list; do echo "$$p"; done | \

- sed -e 's,.*/,,;$(transform)'`; \

- test -n "$$list" || exit 0; \

- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \

- cd "$(DESTDIR)$(bindir)" && rm -f $$files

-

-mostlyclean-libtool:

- -rm -f *.lo

-

-clean-libtool:

- -rm -rf .libs _libs

-install-desktopDATA: $(desktop_DATA)

- @$(NORMAL_INSTALL)

- test -z "$(desktopdir)" || $(MKDIR_P) "$(DESTDIR)$(desktopdir)"

- @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \

- for p in $$list; do \

- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \

- echo "$$d$$p"; \

- done | $(am__base_list) | \

- while read files; do \

- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(desktopdir)'"; \

- $(INSTALL_DATA) $$files "$(DESTDIR)$(desktopdir)" || exit $$?; \

- done

-

-uninstall-desktopDATA:

- @$(NORMAL_UNINSTALL)

- @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \

- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \

- test -n "$$files" || exit 0; \

- echo " ( cd '$(DESTDIR)$(desktopdir)' && rm -f" $$files ")"; \

- cd "$(DESTDIR)$(desktopdir)" && rm -f $$files

-install-schemasDATA: $(schemas_DATA)

- @$(NORMAL_INSTALL)

- test -z "$(schemasdir)" || $(MKDIR_P) "$(DESTDIR)$(schemasdir)"

- @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \

- for p in $$list; do \

- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \

- echo "$$d$$p"; \

- done | $(am__base_list) | \

- while read files; do \

- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(schemasdir)'"; \

- $(INSTALL_DATA) $$files "$(DESTDIR)$(schemasdir)" || exit $$?; \

- done

-

-uninstall-schemasDATA:

- @$(NORMAL_UNINSTALL)

- @list='$(schemas_DATA)'; test -n "$(schemasdir)" || list=; \

- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \

- test -n "$$files" || exit 0; \

- echo " ( cd '$(DESTDIR)$(schemasdir)' && rm -f" $$files ")"; \

- cd "$(DESTDIR)$(schemasdir)" && rm -f $$files

-install-uiDATA: $(ui_DATA)

- @$(NORMAL_INSTALL)

- test -z "$(uidir)" || $(MKDIR_P) "$(DESTDIR)$(uidir)"

- @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \

- for p in $$list; do \

- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \

- echo "$$d$$p"; \

- done | $(am__base_list) | \

- while read files; do \

- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(uidir)'"; \

- $(INSTALL_DATA) $$files "$(DESTDIR)$(uidir)" || exit $$?; \

- done

-

-uninstall-uiDATA:

- @$(NORMAL_UNINSTALL)

- @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \

- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \

- test -n "$$files" || exit 0; \

- echo " ( cd '$(DESTDIR)$(uidir)' && rm -f" $$files ")"; \

- cd "$(DESTDIR)$(uidir)" && rm -f $$files

-install-xsessionDATA: $(xsession_DATA)

- @$(NORMAL_INSTALL)

- test -z "$(xsessiondir)" || $(MKDIR_P) "$(DESTDIR)$(xsessiondir)"

- @list='$(xsession_DATA)'; test -n "$(xsessiondir)" || list=; \

- for p in $$list; do \

- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \

- echo "$$d$$p"; \

- done | $(am__base_list) | \

- while read files; do \

- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(xsessiondir)'"; \

- $(INSTALL_DATA) $$files "$(DESTDIR)$(xsessiondir)" || exit $$?; \

- done

-

-uninstall-xsessionDATA:

- @$(NORMAL_UNINSTALL)

- @list='$(xsession_DATA)'; test -n "$(xsessiondir)" || list=; \