-Installation Instructions

-*************************

-

-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,

-2006, 2007 Free Software Foundation, Inc.

-

-This file is free documentation; the Free Software Foundation gives

-unlimited permission to copy, distribute and modify it.

-

-Basic Installation

-==================

-

-Briefly, the shell commands `./configure; make; make install' should

-configure, build, and install this package. The following

-more-detailed instructions are generic; see the `README' file for

-instructions specific to this package.

-

- The `configure' shell script attempts to guess correct values for

-various system-dependent variables used during compilation. It uses

-those values to create a `Makefile' in each directory of the package.

-It may also create one or more `.h' files containing system-dependent

-definitions. Finally, it creates a shell script `config.status' that

-you can run in the future to recreate the current configuration, and a

-file `config.log' containing compiler output (useful mainly for

-debugging `configure').

-

- It can also use an optional file (typically called `config.cache'

-and enabled with `--cache-file=config.cache' or simply `-C') that saves

-the results of its tests to speed up reconfiguring. Caching is

-disabled by default to prevent problems with accidental use of stale

-cache files.

-

- If you need to do unusual things to compile the package, please try

-to figure out how `configure' could check whether to do them, and mail

-diffs or instructions to the address given in the `README' so they can

-be considered for the next release. If you are using the cache, and at

-some point `config.cache' contains results you don't want to keep, you

-may remove or edit it.

-

- The file `configure.ac' (or `configure.in') is used to create

-`configure' by a program called `autoconf'. You need `configure.ac' if

-you want to change it or regenerate `configure' using a newer version

-of `autoconf'.

-

-The simplest way to compile this package is:

-

- 1. `cd' to the directory containing the package's source code and type

- `./configure' to configure the package for your system.

-

- Running `configure' might take a while. While running, it prints

- some messages telling which features it is checking for.

-

- 2. Type `make' to compile the package.

-

- 3. Optionally, type `make check' to run any self-tests that come with

- the package.

-

- 4. Type `make install' to install the programs and any data files and

- documentation.

-

- 5. You can remove the program binaries and object files from the

- source code directory by typing `make clean'. To also remove the

- files that `configure' created (so you can compile the package for

- a different kind of computer), type `make distclean'. There is

- also a `make maintainer-clean' target, but that is intended mainly

- for the package's developers. If you use it, you may have to get

- all sorts of other programs in order to regenerate files that came

- with the distribution.

-

- 6. Often, you can also type `make uninstall' to remove the installed

- files again.

-

-Compilers and Options

-=====================

-

-Some systems require unusual options for compilation or linking that the

-`configure' script does not know about. Run `./configure --help' for

-details on some of the pertinent environment variables.

-

- You can give `configure' initial values for configuration parameters

-by setting variables in the command line or in the environment. Here

-is an example:

-

- ./configure CC=c99 CFLAGS=-g LIBS=-lposix

-

- *Note Defining Variables::, for more details.

-

-Compiling For Multiple Architectures

-====================================

-

-You can compile the package for more than one kind of computer at the

-same time, by placing the object files for each architecture in their

-own directory. To do this, you can use GNU `make'. `cd' to the

-directory where you want the object files and executables to go and run

-the `configure' script. `configure' automatically checks for the

-source code in the directory that `configure' is in and in `..'.

-

- With a non-GNU `make', it is safer to compile the package for one

-architecture at a time in the source code directory. After you have

-installed the package for one architecture, use `make distclean' before

-reconfiguring for another architecture.

-

-Installation Names

-==================

-

-By default, `make install' installs the package's commands under

-`/usr/local/bin', include files under `/usr/local/include', etc. You

-can specify an installation prefix other than `/usr/local' by giving

-`configure' the option `--prefix=PREFIX'.

-

- You can specify separate installation prefixes for

-architecture-specific files and architecture-independent files. If you

-pass the option `--exec-prefix=PREFIX' to `configure', the package uses

-PREFIX as the prefix for installing programs and libraries.

-Documentation and other data files still use the regular prefix.

-

- In addition, if you use an unusual directory layout you can give

-options like `--bindir=DIR' to specify different values for particular

-kinds of files. Run `configure --help' for a list of the directories

-you can set and what kinds of files go in them.

-

- If the package supports it, you can cause programs to be installed

-with an extra prefix or suffix on their names by giving `configure' the

-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.

-

-Optional Features

-=================

-

-Some packages pay attention to `--enable-FEATURE' options to

-`configure', where FEATURE indicates an optional part of the package.

-They may also pay attention to `--with-PACKAGE' options, where PACKAGE

-is something like `gnu-as' or `x' (for the X Window System). The

-`README' should mention any `--enable-' and `--with-' options that the

-package recognizes.

-

- For packages that use the X Window System, `configure' can usually

-find the X include and library files automatically, but if it doesn't,

-you can use the `configure' options `--x-includes=DIR' and

-`--x-libraries=DIR' to specify their locations.

-

-Specifying the System Type

-==========================

-

-There may be some features `configure' cannot figure out automatically,

-but needs to determine by the type of machine the package will run on.

-Usually, assuming the package is built to be run on the _same_

-architectures, `configure' can figure that out, but if it prints a

-message saying it cannot guess the machine type, give it the

-`--build=TYPE' option. TYPE can either be a short name for the system

-type, such as `sun4', or a canonical name which has the form:

-

- CPU-COMPANY-SYSTEM

-

-where SYSTEM can have one of these forms:

-

- OS KERNEL-OS

-

- See the file `config.sub' for the possible values of each field. If

-`config.sub' isn't included in this package, then this package doesn't

-need to know the machine type.

-

- If you are _building_ compiler tools for cross-compiling, you should

-use the option `--target=TYPE' to select the type of system they will

-produce code for.

-

- If you want to _use_ a cross compiler, that generates code for a

-platform different from the build platform, you should specify the

-"host" platform (i.e., that on which the generated programs will

-eventually be run) with `--host=TYPE'.

-

-Sharing Defaults

-================

-

-If you want to set default values for `configure' scripts to share, you

-can create a site shell script called `config.site' that gives default

-values for variables like `CC', `cache_file', and `prefix'.

-`configure' looks for `PREFIX/share/config.site' if it exists, then

-`PREFIX/etc/config.site' if it exists. Or, you can set the

-`CONFIG_SITE' environment variable to the location of the site script.

-A warning: not all `configure' scripts look for a site script.

-

-Defining Variables

-==================

-

-Variables not defined in a site shell script can be set in the

-environment passed to `configure'. However, some packages may run

-configure again during the build, and the customized values of these

-variables may be lost. In order to avoid this problem, you should set

-them in the `configure' command line, using `VAR=value'. For example:

-

- ./configure CC=/usr/local2/bin/gcc

-

-causes the specified `gcc' to be used as the C compiler (unless it is

-overridden in the site shell script).

-

-Unfortunately, this technique does not work for `CONFIG_SHELL' due to

-an Autoconf bug. Until the bug is fixed you can use this workaround:

-

- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash

-

-`configure' Invocation

-======================

-

-`configure' recognizes the following options to control how it operates.

-

-`--help'

-`-h'

- Print a summary of the options to `configure', and exit.

-

-`--version'

-`-V'

- Print the version of Autoconf used to generate the `configure'

- script, and exit.

-

-`--cache-file=FILE'

- Enable the cache: use and save the results of the tests in FILE,

- traditionally `config.cache'. FILE defaults to `/dev/null' to

- disable caching.

-

-`--config-cache'

-`-C'

- Alias for `--cache-file=config.cache'.

-

-`--quiet'

-`--silent'

-`-q'

- Do not print messages saying which checks are being made. To

- suppress all normal output, redirect it to `/dev/null' (any error

- messages will still be shown).

-

-`--srcdir=DIR'

- Look for the package's source code in directory DIR. Usually

- `configure' can determine that directory automatically.

-

-`configure' also accepts some other, not widely useful, options. Run

-`configure --help' for more details.

-

-Mozo 0.13.2

-================

-See the 'INSTALL' file.

-Bugs should be filed in MATE's bugzilla

-(http://bugzilla.mate.org/enter_bug.cgi?product=mozo) You will

-need to create an account for yourself.

-# generated automatically by aclocal 1.11.1 -*- Autoconf -*-

-

-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,

-# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# This program is distributed in the hope that it will be useful,

-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

-# PARTICULAR PURPOSE.

-

-m4_ifndef([AC_AUTOCONF_VERSION],

- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl

-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,

-[m4_warning([this file was generated for autoconf 2.68.

-You have another version of autoconf. It may work, but is not guaranteed to.

-If you have problems, you may need to regenerate the build system entirely.

-To do so, use the procedure documented by the package, typically `autoreconf'.])])

-

-# Copyright (C) 1995-2002 Free Software Foundation, Inc.

-# Copyright (C) 2001-2003,2004 Red Hat, Inc.

-#

-# This file is free software, distributed under the terms of the GNU

-# General Public License. As a special exception to the GNU General

-# Public License, this file may be distributed as part of a program

-# that contains a configuration script generated by Autoconf, under

-# the same distribution terms as the rest of that program.

-#

-# This file can be copied and used freely without restrictions. It can

-# be used in projects which are not available under the GNU Public License

-# but which still want to provide support for the GNU gettext functionality.

-#

-# Macro to add for using GNU gettext.

-# Ulrich Drepper <[email protected]>, 1995, 1996

-#

-# Modified to never use included libintl.

-# Owen Taylor <[email protected]>, 12/15/1998

-#

-# Major rework to remove unused code

-# Owen Taylor <[email protected]>, 12/11/2002

-#

-# Added better handling of ALL_LINGUAS from GNU gettext version

-# written by Bruno Haible, Owen Taylor <otaylor.redhat.com> 5/30/3002

-#

-# Modified to require ngettext

-# Matthias Clasen <[email protected]> 08/06/2004

-#

-# We need this here as well, since someone might use autoconf-2.5x

-# to configure GLib then an older version to configure a package

-# using AM_GLIB_GNU_GETTEXT

-AC_PREREQ(2.53)

-

-dnl

-dnl We go to great lengths to make sure that aclocal won't

-dnl try to pull in the installed version of these macros

-dnl when running aclocal in the glib directory.

-dnl

-m4_copy([AC_DEFUN],[glib_DEFUN])

-m4_copy([AC_REQUIRE],[glib_REQUIRE])

-dnl

-dnl At the end, if we're not within glib, we'll define the public

-dnl definitions in terms of our private definitions.

-dnl

-

-# GLIB_LC_MESSAGES

-#--------------------

-glib_DEFUN([GLIB_LC_MESSAGES],

- [AC_CHECK_HEADERS([locale.h])

- if test $ac_cv_header_locale_h = yes; then

- AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,

- [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],

- am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])

- if test $am_cv_val_LC_MESSAGES = yes; then

- AC_DEFINE(HAVE_LC_MESSAGES, 1,

- [Define if your <locale.h> file defines LC_MESSAGES.])

- fi

- fi])

-

-# GLIB_PATH_PROG_WITH_TEST

-#----------------------------

-dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,

-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])

-glib_DEFUN([GLIB_PATH_PROG_WITH_TEST],

-[# Extract the first word of "$2", so it can be a program name with args.

-set dummy $2; ac_word=[$]2

-AC_MSG_CHECKING([for $ac_word])

-AC_CACHE_VAL(ac_cv_path_$1,

-[case "[$]$1" in

- /*)

- ac_cv_path_$1="[$]$1" # Let the user override the test with a path.

- ;;

- *)

- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"

- for ac_dir in ifelse([$5], , $PATH, [$5]); do

- test -z "$ac_dir" && ac_dir=.

- if test -f $ac_dir/$ac_word; then

- if [$3]; then

- ac_cv_path_$1="$ac_dir/$ac_word"

- break

- fi

- fi

- done

- IFS="$ac_save_ifs"

-dnl If no 4th arg is given, leave the cache variable unset,

-dnl so AC_PATH_PROGS will keep looking.

-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"

-])dnl

- ;;

-esac])dnl

-$1="$ac_cv_path_$1"

-if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then

- AC_MSG_RESULT([$]$1)

-else

- AC_MSG_RESULT(no)

-fi

-AC_SUBST($1)dnl

-])

-

-# GLIB_WITH_NLS

-#-----------------

-glib_DEFUN([GLIB_WITH_NLS],

- dnl NLS is obligatory

- [USE_NLS=yes

- AC_SUBST(USE_NLS)

-

- gt_cv_have_gettext=no

-

- CATOBJEXT=NONE

- XGETTEXT=:

- INTLLIBS=

-

- AC_CHECK_HEADER(libintl.h,

- [gt_cv_func_dgettext_libintl="no"

- libintl_extra_libs=""

-

- #

- # First check in libc

- #

- AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc,

- [AC_TRY_LINK([

-#include <libintl.h>

-],

- [return !ngettext ("","", 1)],

- gt_cv_func_ngettext_libc=yes,

- gt_cv_func_ngettext_libc=no)

- ])

-

- if test "$gt_cv_func_ngettext_libc" = "yes" ; then

- AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc,

- [AC_TRY_LINK([

-#include <libintl.h>

-],

- [return !dgettext ("","")],

- gt_cv_func_dgettext_libc=yes,

- gt_cv_func_dgettext_libc=no)

- ])

- fi

-

- if test "$gt_cv_func_ngettext_libc" = "yes" ; then

- AC_CHECK_FUNCS(bind_textdomain_codeset)

- fi

-

- #

- # If we don't have everything we want, check in libintl

- #

- if test "$gt_cv_func_dgettext_libc" != "yes" \

- || test "$gt_cv_func_ngettext_libc" != "yes" \

- || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then

-

- AC_CHECK_LIB(intl, bindtextdomain,

- [AC_CHECK_LIB(intl, ngettext,

- [AC_CHECK_LIB(intl, dgettext,

- gt_cv_func_dgettext_libintl=yes)])])

-

- if test "$gt_cv_func_dgettext_libintl" != "yes" ; then

- AC_MSG_CHECKING([if -liconv is needed to use gettext])

- AC_MSG_RESULT([])

- AC_CHECK_LIB(intl, ngettext,

- [AC_CHECK_LIB(intl, dcgettext,

- [gt_cv_func_dgettext_libintl=yes

- libintl_extra_libs=-liconv],

- :,-liconv)],

- :,-liconv)

- fi

-

- #

- # If we found libintl, then check in it for bind_textdomain_codeset();

- # we'll prefer libc if neither have bind_textdomain_codeset(),

- # and both have dgettext and ngettext

- #

- if test "$gt_cv_func_dgettext_libintl" = "yes" ; then

- glib_save_LIBS="$LIBS"

- LIBS="$LIBS -lintl $libintl_extra_libs"

- unset ac_cv_func_bind_textdomain_codeset

- AC_CHECK_FUNCS(bind_textdomain_codeset)

- LIBS="$glib_save_LIBS"

-

- if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then

- gt_cv_func_dgettext_libc=no

- else

- if test "$gt_cv_func_dgettext_libc" = "yes" \

- && test "$gt_cv_func_ngettext_libc" = "yes"; then

- gt_cv_func_dgettext_libintl=no

- fi

- fi

- fi

- fi

-

- if test "$gt_cv_func_dgettext_libc" = "yes" \

- || test "$gt_cv_func_dgettext_libintl" = "yes"; then

- gt_cv_have_gettext=yes

- fi

-

- if test "$gt_cv_func_dgettext_libintl" = "yes"; then

- INTLLIBS="-lintl $libintl_extra_libs"

- fi

-

- if test "$gt_cv_have_gettext" = "yes"; then

- AC_DEFINE(HAVE_GETTEXT,1,

- [Define if the GNU gettext() function is already present or preinstalled.])

- GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,

- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl

- if test "$MSGFMT" != "no"; then

- glib_save_LIBS="$LIBS"

- LIBS="$LIBS $INTLLIBS"

- AC_CHECK_FUNCS(dcgettext)

- MSGFMT_OPTS=

- AC_MSG_CHECKING([if msgfmt accepts -c])

- GLIB_RUN_PROG([$MSGFMT -c -o /dev/null],[

-msgid ""

-msgstr ""

-"Content-Type: text/plain; charset=UTF-8\n"

-"Project-Id-Version: test 1.0\n"

-"PO-Revision-Date: 2007-02-15 12:01+0100\n"

-"Last-Translator: test <[email protected]>\n"

-"Language-Team: C <[email protected]>\n"

-"MIME-Version: 1.0\n"

-"Content-Transfer-Encoding: 8bit\n"

-], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])])

- AC_SUBST(MSGFMT_OPTS)

- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)

- GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,

- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)

- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;

- return _nl_msg_cat_cntr],

- [CATOBJEXT=.gmo

- DATADIRNAME=share],

- [case $host in

- *-*-solaris*)

- dnl On Solaris, if bind_textdomain_codeset is in libc,

- dnl GNU format message catalog is always supported,

- dnl since both are added to the libc all together.

- dnl Hence, we'd like to go with DATADIRNAME=share and

- dnl and CATOBJEXT=.gmo in this case.

- AC_CHECK_FUNC(bind_textdomain_codeset,

- [CATOBJEXT=.gmo

- DATADIRNAME=share],

- [CATOBJEXT=.mo

- DATADIRNAME=lib])

- ;;

- *)

- CATOBJEXT=.mo

- DATADIRNAME=lib

- ;;

- esac])

- LIBS="$glib_save_LIBS"

- INSTOBJEXT=.mo

- else

- gt_cv_have_gettext=no

- fi

- fi

- ])

-

- if test "$gt_cv_have_gettext" = "yes" ; then

- AC_DEFINE(ENABLE_NLS, 1,

- [always defined to indicate that i18n is enabled])

- fi

-

- dnl Test whether we really found GNU xgettext.

- if test "$XGETTEXT" != ":"; then

- dnl If it is not GNU xgettext we define it as : so that the

- dnl Makefiles still can work.

- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then

- : ;

- else

- AC_MSG_RESULT(

- [found xgettext program is not GNU xgettext; ignore it])

- XGETTEXT=":"

- fi

- fi

-

- # We need to process the po/ directory.

- POSUB=po

-

- AC_OUTPUT_COMMANDS(

- [case "$CONFIG_FILES" in *po/Makefile.in*)

- sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile

- esac])

-

- dnl These rules are solely for the distribution goal. While doing this

- dnl we only have to keep exactly one list of the available catalogs

- dnl in configure.ac.

- for lang in $ALL_LINGUAS; do

- GMOFILES="$GMOFILES $lang.gmo"

- POFILES="$POFILES $lang.po"

- done

-

- dnl Make all variables we use known to autoconf.

- AC_SUBST(CATALOGS)

- AC_SUBST(CATOBJEXT)

- AC_SUBST(DATADIRNAME)

- AC_SUBST(GMOFILES)

- AC_SUBST(INSTOBJEXT)

- AC_SUBST(INTLLIBS)

- AC_SUBST(PO_IN_DATADIR_TRUE)

- AC_SUBST(PO_IN_DATADIR_FALSE)

- AC_SUBST(POFILES)

- AC_SUBST(POSUB)

- ])

-

-# AM_GLIB_GNU_GETTEXT

-# -------------------

-# Do checks necessary for use of gettext. If a suitable implementation

-# of gettext is found in either in libintl or in the C library,

-# it will set INTLLIBS to the libraries needed for use of gettext

-# and AC_DEFINE() HAVE_GETTEXT and ENABLE_NLS. (The shell variable

-# gt_cv_have_gettext will be set to "yes".) It will also call AC_SUBST()

-# on various variables needed by the Makefile.in.in installed by

-# glib-gettextize.

-dnl

-glib_DEFUN([GLIB_GNU_GETTEXT],

- [AC_REQUIRE([AC_PROG_CC])dnl

- AC_REQUIRE([AC_HEADER_STDC])dnl

-

- GLIB_LC_MESSAGES

- GLIB_WITH_NLS

-

- if test "$gt_cv_have_gettext" = "yes"; then

- if test "x$ALL_LINGUAS" = "x"; then

- LINGUAS=

- else

- AC_MSG_CHECKING(for catalogs to be installed)

- NEW_LINGUAS=

- for presentlang in $ALL_LINGUAS; do

- useit=no

- if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then

- desiredlanguages="$LINGUAS"

- else

- desiredlanguages="$ALL_LINGUAS"

- fi

- for desiredlang in $desiredlanguages; do

- # Use the presentlang catalog if desiredlang is

- # a. equal to presentlang, or

- # b. a variant of presentlang (because in this case,

- # presentlang can be used as a fallback for messages

- # which are not translated in the desiredlang catalog).

- case "$desiredlang" in

- "$presentlang"*) useit=yes;;

- esac

- done

- if test $useit = yes; then

- NEW_LINGUAS="$NEW_LINGUAS $presentlang"

- fi

- done

- LINGUAS=$NEW_LINGUAS

- AC_MSG_RESULT($LINGUAS)

- fi

-

- dnl Construct list of names of catalog files to be constructed.

- if test -n "$LINGUAS"; then

- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done

- fi

- fi

-

- dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly

- dnl find the mkinstalldirs script in another subdir but ($top_srcdir).

- dnl Try to locate is.

- MKINSTALLDIRS=

- if test -n "$ac_aux_dir"; then

- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"

- fi

- if test -z "$MKINSTALLDIRS"; then

- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"

- fi

- AC_SUBST(MKINSTALLDIRS)

-

- dnl Generate list of files to be processed by xgettext which will

- dnl be included in po/Makefile.

- test -d po || mkdir po

- if test "x$srcdir" != "x."; then

- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then

- posrcprefix="$srcdir/"

- else

- posrcprefix="../$srcdir/"

- fi

- else

- posrcprefix="../"

- fi

- rm -f po/POTFILES

- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \

- < $srcdir/po/POTFILES.in > po/POTFILES

- ])

-

-# AM_GLIB_DEFINE_LOCALEDIR(VARIABLE)

-# -------------------------------

-# Define VARIABLE to the location where catalog files will

-# be installed by po/Makefile.

-glib_DEFUN([GLIB_DEFINE_LOCALEDIR],

-[glib_REQUIRE([GLIB_GNU_GETTEXT])dnl

-glib_save_prefix="$prefix"

-glib_save_exec_prefix="$exec_prefix"

-glib_save_datarootdir="$datarootdir"

-test "x$prefix" = xNONE && prefix=$ac_default_prefix

-test "x$exec_prefix" = xNONE && exec_prefix=$prefix

-datarootdir=`eval echo "${datarootdir}"`

-if test "x$CATOBJEXT" = "x.mo" ; then

- localedir=`eval echo "${libdir}/locale"`

-else

- localedir=`eval echo "${datadir}/locale"`

-fi

-prefix="$glib_save_prefix"

-exec_prefix="$glib_save_exec_prefix"

-datarootdir="$glib_save_datarootdir"

-AC_DEFINE_UNQUOTED($1, "$localedir",

- [Define the location where the catalogs will be installed])

-])

-

-dnl

-dnl Now the definitions that aclocal will find

-dnl

-ifdef(glib_configure_ac,[],[

-AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)])

-AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)])

-])dnl

-

-# GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL])

-#

-# Create a temporary file with TEST-FILE as its contents and pass the

-# file name to PROGRAM. Perform ACTION-IF-PASS if PROGRAM exits with

-# 0 and perform ACTION-IF-FAIL for any other exit status.

-AC_DEFUN([GLIB_RUN_PROG],

-[cat >conftest.foo <<_ACEOF

-$2

-_ACEOF

-if AC_RUN_LOG([$1 conftest.foo]); then

- m4_ifval([$3], [$3], [:])

-m4_ifvaln([$4], [else $4])dnl

-echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD

-sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD

-fi])

-

-

-

-dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml])

-# serial 40 IT_PROG_INTLTOOL

-AC_DEFUN([IT_PROG_INTLTOOL], [

-AC_PREREQ([2.50])dnl

-AC_REQUIRE([AM_NLS])dnl

-

-case "$am__api_version" in

- 1.[01234])

- AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool])

- ;;

- *)

- ;;

-esac

-

-if test -n "$1"; then

- AC_MSG_CHECKING([for intltool >= $1])

-

- INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`

- INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3`

- [INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`

- ]

- AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found])

- test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" ||

- AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.])

-fi

-

-AC_PATH_PROG(INTLTOOL_UPDATE, [intltool-update])

-AC_PATH_PROG(INTLTOOL_MERGE, [intltool-merge])

-AC_PATH_PROG(INTLTOOL_EXTRACT, [intltool-extract])

-if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then

- AC_MSG_ERROR([The intltool scripts were not found. Please install intltool.])

-fi

-

- INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

-INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

- INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

- INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

- INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< [$]@'

- INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

- INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

- INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

-INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

- INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

- INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

- INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< [$]@'

- INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

- INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

- INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

- INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

- INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

- INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

- INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'

-

-_IT_SUBST(INTLTOOL_DESKTOP_RULE)

-_IT_SUBST(INTLTOOL_DIRECTORY_RULE)

-_IT_SUBST(INTLTOOL_KEYS_RULE)

-_IT_SUBST(INTLTOOL_PROP_RULE)

-_IT_SUBST(INTLTOOL_OAF_RULE)

-_IT_SUBST(INTLTOOL_PONG_RULE)

-_IT_SUBST(INTLTOOL_SERVER_RULE)

-_IT_SUBST(INTLTOOL_SHEET_RULE)

-_IT_SUBST(INTLTOOL_SOUNDLIST_RULE)

-_IT_SUBST(INTLTOOL_UI_RULE)

-_IT_SUBST(INTLTOOL_XAM_RULE)

-_IT_SUBST(INTLTOOL_KBD_RULE)

-_IT_SUBST(INTLTOOL_XML_RULE)

-_IT_SUBST(INTLTOOL_XML_NOMERGE_RULE)

-_IT_SUBST(INTLTOOL_CAVES_RULE)

-_IT_SUBST(INTLTOOL_SCHEMAS_RULE)

-_IT_SUBST(INTLTOOL_THEME_RULE)

-_IT_SUBST(INTLTOOL_SERVICE_RULE)

-_IT_SUBST(INTLTOOL_POLICY_RULE)

-

-# Check the gettext tools to make sure they are GNU

-AC_PATH_PROG(XGETTEXT, xgettext)

-AC_PATH_PROG(MSGMERGE, msgmerge)

-AC_PATH_PROG(MSGFMT, msgfmt)

-AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)

-if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then

- AC_MSG_ERROR([GNU gettext tools not found; required for intltool])

-fi

-xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`"

-mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`"

-mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`"

-if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then

- AC_MSG_ERROR([GNU gettext tools not found; required for intltool])

-fi

-

-AC_PATH_PROG(INTLTOOL_PERL, perl)

-if test -z "$INTLTOOL_PERL"; then

- AC_MSG_ERROR([perl not found])

-fi

-AC_MSG_CHECKING([for perl >= 5.8.1])

-$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1

-if test $? -ne 0; then

- AC_MSG_ERROR([perl 5.8.1 is required for intltool])

-else

- IT_PERL_VERSION="`$INTLTOOL_PERL -e \"printf '%vd', $^V\"`"

- AC_MSG_RESULT([$IT_PERL_VERSION])

-fi

-if test "x$2" != "xno-xml"; then

- AC_MSG_CHECKING([for XML::Parser])

- if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then

- AC_MSG_RESULT([ok])

- else

- AC_MSG_ERROR([XML::Parser perl module is required for intltool])

- fi

-fi

-

-# Substitute ALL_LINGUAS so we can use it in po/Makefile

-AC_SUBST(ALL_LINGUAS)

-

-# Set DATADIRNAME correctly if it is not set yet

-# (copied from glib-gettext.m4)

-if test -z "$DATADIRNAME"; then

- AC_LINK_IFELSE(

- [AC_LANG_PROGRAM([[]],

- [[extern int _nl_msg_cat_cntr;

- return _nl_msg_cat_cntr]])],

- [DATADIRNAME=share],

- [case $host in

- *-*-solaris*)

- dnl On Solaris, if bind_textdomain_codeset is in libc,

- dnl GNU format message catalog is always supported,

- dnl since both are added to the libc all together.

- dnl Hence, we'd like to go with DATADIRNAME=share

- dnl in this case.

- AC_CHECK_FUNC(bind_textdomain_codeset,

- [DATADIRNAME=share], [DATADIRNAME=lib])

- ;;

- *)

- [DATADIRNAME=lib]

- ;;

- esac])

-fi

-AC_SUBST(DATADIRNAME)

-

-IT_PO_SUBDIR([po])

-

-])

-

-

-# IT_PO_SUBDIR(DIRNAME)

-# ---------------------

-# All po subdirs have to be declared with this macro; the subdir "po" is

-# declared by IT_PROG_INTLTOOL.

-#

-AC_DEFUN([IT_PO_SUBDIR],

-[AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS.

-dnl

-dnl The following CONFIG_COMMANDS should be executed at the very end

-dnl of config.status.

-AC_CONFIG_COMMANDS_PRE([

- AC_CONFIG_COMMANDS([$1/stamp-it], [

- if [ ! grep "^# INTLTOOL_MAKEFILE$" "$1/Makefile.in" > /dev/null ]; then

- AC_MSG_ERROR([$1/Makefile.in.in was not created by intltoolize.])

- fi

- rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp"

- >"$1/stamp-it.tmp"

- [sed '/^#/d

- s/^[[].*] *//

- /^[ ]*$/d

- '"s|^| $ac_top_srcdir/|" \

- "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES"

- ]

- [sed '/^POTFILES =/,/[^\\]$/ {

- /^POTFILES =/!d

- r $1/POTFILES

- }

- ' "$1/Makefile.in" >"$1/Makefile"]

- rm -f "$1/Makefile.tmp"

- mv "$1/stamp-it.tmp" "$1/stamp-it"

- ])

-])dnl

-])

-

-# _IT_SUBST(VARIABLE)

-# -------------------

-# Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST

-#

-AC_DEFUN([_IT_SUBST],

-[

-AC_SUBST([$1])

-m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])])

-]

-)

-

-# deprecated macros

-AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL])

-# A hint is needed for aclocal from Automake <= 1.9.4:

-# AC_DEFUN([AC_PROG_INTLTOOL], ...)

-

-

-# nls.m4 serial 5 (gettext-0.18)

-dnl Copyright (C) 1995-2003, 2005-2006, 2008-2010 Free Software Foundation,

-dnl Inc.

-dnl This file is free software; the Free Software Foundation

-dnl gives unlimited permission to copy and/or distribute it,

-dnl with or without modifications, as long as this notice is preserved.

-dnl

-dnl This file can can be used in projects which are not available under

-dnl the GNU General Public License or the GNU Library General Public

-dnl License but which still want to provide support for the GNU gettext

-dnl functionality.

-dnl Please note that the actual code of the GNU gettext library is covered

-dnl by the GNU Library General Public License, and the rest of the GNU

-dnl gettext package package is covered by the GNU General Public License.

-dnl They are *not* in the public domain.

-

-dnl Authors:

-dnl Ulrich Drepper <[email protected]>, 1995-2000.

-dnl Bruno Haible <[email protected]>, 2000-2003.

-

-AC_PREREQ([2.50])

-

-AC_DEFUN([AM_NLS],

-[

- AC_MSG_CHECKING([whether NLS is requested])

- dnl Default is enabled NLS

- AC_ARG_ENABLE([nls],

- [ --disable-nls do not use Native Language Support],

- USE_NLS=$enableval, USE_NLS=yes)

- AC_MSG_RESULT([$USE_NLS])

- AC_SUBST([USE_NLS])

-])

-

-# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-

-# serial 1 (pkg-config-0.24)

-#

-# Copyright © 2004 Scott James Remnant <[email protected]>.

-#

-# This program is free software; you can redistribute it and/or modify

-# it under the terms of the GNU General Public License as published by

-# the Free Software Foundation; either version 2 of the License, or

-# (at your option) any later version.

-#

-# This program is distributed in the hope that it will be useful, but

-# WITHOUT ANY WARRANTY; without even the implied warranty of

-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU

-# General Public License for more details.

-#

-# You should have received a copy of the GNU General Public License

-# along with this program; if not, write to the Free Software

-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

-#

-# As a special exception to the GNU General Public License, if you

-# distribute this file as part of a program that contains a

-# configuration script generated by Autoconf, you may include it under

-# the same distribution terms that you use for the rest of that program.

-

-# PKG_PROG_PKG_CONFIG([MIN-VERSION])

-# ----------------------------------

-AC_DEFUN([PKG_PROG_PKG_CONFIG],

-[m4_pattern_forbid([^_?PKG_[A-Z_]+$])

-m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])

-m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])

-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])

-AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])

-AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])

-

-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then

- AC_PATH_TOOL([PKG_CONFIG], [pkg-config])

-fi

-if test -n "$PKG_CONFIG"; then

- _pkg_min_version=m4_default([$1], [0.9.0])

- AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])

- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then

- AC_MSG_RESULT([yes])

- else

- AC_MSG_RESULT([no])

- PKG_CONFIG=""

- fi

-fi[]dnl

-])# PKG_PROG_PKG_CONFIG

-

-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])

-#

-# Check to see whether a particular set of modules exists. Similar

-# to PKG_CHECK_MODULES(), but does not set variables or print errors.

-#

-# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])

-# only at the first occurence in configure.ac, so if the first place

-# it's called might be skipped (such as if it is within an "if", you

-# have to call PKG_CHECK_EXISTS manually

-# --------------------------------------------------------------

-AC_DEFUN([PKG_CHECK_EXISTS],

-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl

-if test -n "$PKG_CONFIG" && \

- AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then

- m4_default([$2], [:])

-m4_ifvaln([$3], [else

- $3])dnl

-fi])

-

-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])

-# ---------------------------------------------

-m4_define([_PKG_CONFIG],

-[if test -n "$$1"; then

- pkg_cv_[]$1="$$1"

- elif test -n "$PKG_CONFIG"; then

- PKG_CHECK_EXISTS([$3],

- [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`

- test "x$?" != "x0" && pkg_failed=yes ],

- [pkg_failed=yes])

- else

- pkg_failed=untried

-fi[]dnl

-])# _PKG_CONFIG

-

-# _PKG_SHORT_ERRORS_SUPPORTED

-# -----------------------------

-AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],

-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])

-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then

- _pkg_short_errors_supported=yes

-else

- _pkg_short_errors_supported=no

-fi[]dnl

-])# _PKG_SHORT_ERRORS_SUPPORTED

-

-

-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],

-# [ACTION-IF-NOT-FOUND])

-#

-#

-# Note that if there is a possibility the first call to

-# PKG_CHECK_MODULES might not happen, you should be sure to include an

-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac

-#

-#

-# --------------------------------------------------------------

-AC_DEFUN([PKG_CHECK_MODULES],

-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl

-AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl

-AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl

-

-pkg_failed=no

-AC_MSG_CHECKING([for $1])

-

-_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])

-_PKG_CONFIG([$1][_LIBS], [libs], [$2])

-

-m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS

-and $1[]_LIBS to avoid the need to call pkg-config.

-See the pkg-config man page for more details.])

-

-if test $pkg_failed = yes; then

- AC_MSG_RESULT([no])

- _PKG_SHORT_ERRORS_SUPPORTED

- if test $_pkg_short_errors_supported = yes; then

- $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`

- else

- $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`

- fi

- # Put the nasty error message in config.log where it belongs

- echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD

-

- m4_default([$4], [AC_MSG_ERROR(

-[Package requirements ($2) were not met:

-

-$$1_PKG_ERRORS

-

-Consider adjusting the PKG_CONFIG_PATH environment variable if you

-installed software in a non-standard prefix.

-

-_PKG_TEXT])[]dnl

- ])

-elif test $pkg_failed = untried; then

- AC_MSG_RESULT([no])

- m4_default([$4], [AC_MSG_FAILURE(

-[The pkg-config script could not be found or is too old. Make sure it

-is in your PATH or set the PKG_CONFIG environment variable to the full

-path to pkg-config.

-

-_PKG_TEXT

-

-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl

- ])

-else

- $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS

- $1[]_LIBS=$pkg_cv_[]$1[]_LIBS

- AC_MSG_RESULT([yes])

- $3

-fi[]dnl

-])# PKG_CHECK_MODULES

-

-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# AM_AUTOMAKE_VERSION(VERSION)

-# ----------------------------

-# Automake X.Y traces this macro to ensure aclocal.m4 has been

-# generated from the m4 files accompanying Automake X.Y.

-# (This private macro should not be called outside this file.)

-AC_DEFUN([AM_AUTOMAKE_VERSION],

-[am__api_version='1.11'

-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to

-dnl require some minimum version. Point them to the right macro.

-m4_if([$1], [1.11.1], [],

- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl

-])

-

-# _AM_AUTOCONF_VERSION(VERSION)

-# -----------------------------

-# aclocal traces this macro to find the Autoconf version.

-# This is a private macro too. Using m4_define simplifies

-# the logic in aclocal, which can simply ignore this definition.

-m4_define([_AM_AUTOCONF_VERSION], [])

-

-# AM_SET_CURRENT_AUTOMAKE_VERSION

-# -------------------------------

-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.

-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.

-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],

-[AM_AUTOMAKE_VERSION([1.11.1])dnl

-m4_ifndef([AC_AUTOCONF_VERSION],

- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl

-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])

-

-# AM_AUX_DIR_EXPAND -*- Autoconf -*-

-

-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets

-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to

-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.

-#

-# Of course, Automake must honor this variable whenever it calls a

-# tool from the auxiliary directory. The problem is that $srcdir (and

-# therefore $ac_aux_dir as well) can be either absolute or relative,

-# depending on how configure is run. This is pretty annoying, since

-# it makes $ac_aux_dir quite unusable in subdirectories: in the top

-# source directory, any form will work fine, but in subdirectories a

-# relative path needs to be adjusted first.

-#

-# $ac_aux_dir/missing

-# fails when called from a subdirectory if $ac_aux_dir is relative

-# $top_srcdir/$ac_aux_dir/missing

-# fails if $ac_aux_dir is absolute,

-# fails when called from a subdirectory in a VPATH build with

-# a relative $ac_aux_dir

-#

-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir

-# are both prefixed by $srcdir. In an in-source build this is usually

-# harmless because $srcdir is `.', but things will broke when you

-# start a VPATH build or use an absolute $srcdir.

-#

-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,

-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:

-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`

-# and then we would define $MISSING as

-# MISSING="\${SHELL} $am_aux_dir/missing"

-# This will work as long as MISSING is not called from configure, because

-# unfortunately $(top_srcdir) has no meaning in configure.

-# However there are other variables, like CC, which are often used in

-# configure, and could therefore not use this "fixed" $ac_aux_dir.

-#

-# Another solution, used here, is to always expand $ac_aux_dir to an

-# absolute PATH. The drawback is that using absolute paths prevent a

-# configured tree to be moved without reconfiguration.

-

-AC_DEFUN([AM_AUX_DIR_EXPAND],

-[dnl Rely on autoconf to set up CDPATH properly.

-AC_PREREQ([2.50])dnl

-# expand $ac_aux_dir to an absolute path

-am_aux_dir=`cd $ac_aux_dir && pwd`

-])

-

-# AM_CONDITIONAL -*- Autoconf -*-

-

-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 9

-

-# AM_CONDITIONAL(NAME, SHELL-CONDITION)

-# -------------------------------------

-# Define a conditional.

-AC_DEFUN([AM_CONDITIONAL],

-[AC_PREREQ(2.52)dnl

- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],

- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl

-AC_SUBST([$1_TRUE])dnl

-AC_SUBST([$1_FALSE])dnl

-_AM_SUBST_NOTMAKE([$1_TRUE])dnl

-_AM_SUBST_NOTMAKE([$1_FALSE])dnl

-m4_define([_AM_COND_VALUE_$1], [$2])dnl

-if $2; then

- $1_TRUE=

- $1_FALSE='#'

-else

- $1_TRUE='#'

- $1_FALSE=

-fi

-AC_CONFIG_COMMANDS_PRE(

-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then

- AC_MSG_ERROR([[conditional "$1" was never defined.

-Usually this means the macro was only invoked conditionally.]])

-fi])])

-

-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 10

-

-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be

-# written in clear, in which case automake, when reading aclocal.m4,

-# will think it sees a *use*, and therefore will trigger all it's

-# C support machinery. Also note that it means that autoscan, seeing

-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...

-

-

-# _AM_DEPENDENCIES(NAME)

-# ----------------------

-# See how the compiler implements dependency checking.

-# NAME is "CC", "CXX", "GCJ", or "OBJC".

-# We try a few techniques and use that to set a single cache variable.

-#

-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was

-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular

-# dependency, and given that the user is not expected to run this macro,

-# just rely on AC_PROG_CC.

-AC_DEFUN([_AM_DEPENDENCIES],

-[AC_REQUIRE([AM_SET_DEPDIR])dnl

-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl

-AC_REQUIRE([AM_MAKE_INCLUDE])dnl

-AC_REQUIRE([AM_DEP_TRACK])dnl

-

-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],

- [$1], CXX, [depcc="$CXX" am_compiler_list=],

- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],

- [$1], UPC, [depcc="$UPC" am_compiler_list=],

- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],

- [depcc="$$1" am_compiler_list=])

-

-AC_CACHE_CHECK([dependency style of $depcc],

- [am_cv_$1_dependencies_compiler_type],

-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then

- # We make a subdir and do the tests there. Otherwise we can end up

- # making bogus files that we don't know about and never remove. For

- # instance it was reported that on HP-UX the gcc test will end up

- # making a dummy file named `D' -- because `-MD' means `put the output

- # in D'.

- mkdir conftest.dir

- # Copy depcomp to subdir because otherwise we won't find it if we're

- # using a relative directory.

- cp "$am_depcomp" conftest.dir

- cd conftest.dir

- # We will build objects and dependencies in a subdirectory because

- # it helps to detect inapplicable dependency modes. For instance

- # both Tru64's cc and ICC support -MD to output dependencies as a

- # side effect of compilation, but ICC will put the dependencies in

- # the current directory while Tru64 will put them in the object

- # directory.

- mkdir sub

-

- am_cv_$1_dependencies_compiler_type=none

- if test "$am_compiler_list" = ""; then

- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`

- fi

- am__universal=false

- m4_case([$1], [CC],

- [case " $depcc " in #(

- *\ -arch\ *\ -arch\ *) am__universal=true ;;

- esac],

- [CXX],

- [case " $depcc " in #(

- *\ -arch\ *\ -arch\ *) am__universal=true ;;

- esac])

-

- for depmode in $am_compiler_list; do

- # Setup a source with many dependencies, because some compilers

- # like to wrap large dependency lists on column 80 (with \), and

- # we should not choose a depcomp mode which is confused by this.

- #

- # We need to recreate these files for each test, as the compiler may

- # overwrite some of them when testing with obscure command lines.

- # This happens at least with the AIX C compiler.

- : > sub/conftest.c

- for i in 1 2 3 4 5 6; do

- echo '#include "conftst'$i'.h"' >> sub/conftest.c

- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with

- # Solaris 8's {/usr,}/bin/sh.

- touch sub/conftst$i.h

- done

- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf

-

- # We check with `-c' and `-o' for the sake of the "dashmstdout"

- # mode. It turns out that the SunPro C++ compiler does not properly

- # handle `-M -o', and we need to detect this. Also, some Intel

- # versions had trouble with output in subdirs

- am__obj=sub/conftest.${OBJEXT-o}

- am__minus_obj="-o $am__obj"

- case $depmode in

- gcc)

- # This depmode causes a compiler race in universal mode.

- test "$am__universal" = false || continue

- ;;

- nosideeffect)

- # after this tag, mechanisms are not by side-effect, so they'll

- # only be used when explicitly requested

- if test "x$enable_dependency_tracking" = xyes; then

- continue

- else

- break

- fi

- ;;

- msvisualcpp | msvcmsys)

- # This compiler won't grok `-c -o', but also, the minuso test has

- # not run yet. These depmodes are late enough in the game, and

- # so weak that their functioning should not be impacted.

- am__obj=conftest.${OBJEXT-o}

- am__minus_obj=

- ;;

- none) break ;;

- esac

- if depmode=$depmode \

- source=sub/conftest.c object=$am__obj \

- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \

- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \

- >/dev/null 2>conftest.err &&

- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&

- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&

- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&

- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then

- # icc doesn't choke on unknown options, it will just issue warnings

- # or remarks (even with -Werror). So we grep stderr for any message

- # that says an option was ignored or not supported.

- # When given -MP, icc 7.0 and 7.1 complain thusly:

- # icc: Command line warning: ignoring option '-M'; no argument required

- # The diagnosis changed in icc 8.0:

- # icc: Command line remark: option '-MP' not supported

- if (grep 'ignoring option' conftest.err ||

- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else

- am_cv_$1_dependencies_compiler_type=$depmode

- break

- fi

- fi

- done

-

- cd ..

- rm -rf conftest.dir

-else

- am_cv_$1_dependencies_compiler_type=none

-fi

-])

-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])

-AM_CONDITIONAL([am__fastdep$1], [

- test "x$enable_dependency_tracking" != xno \

- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])

-])

-

-

-# AM_SET_DEPDIR

-# -------------

-# Choose a directory name for dependency files.

-# This macro is AC_REQUIREd in _AM_DEPENDENCIES

-AC_DEFUN([AM_SET_DEPDIR],

-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl

-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl

-])

-

-

-# AM_DEP_TRACK

-# ------------

-AC_DEFUN([AM_DEP_TRACK],

-[AC_ARG_ENABLE(dependency-tracking,

-[ --disable-dependency-tracking speeds up one-time build

- --enable-dependency-tracking do not reject slow dependency extractors])

-if test "x$enable_dependency_tracking" != xno; then

- am_depcomp="$ac_aux_dir/depcomp"

- AMDEPBACKSLASH='\'

-fi

-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])

-AC_SUBST([AMDEPBACKSLASH])dnl

-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl

-])

-

-# Generate code to set up dependency tracking. -*- Autoconf -*-

-

-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-#serial 5

-

-# _AM_OUTPUT_DEPENDENCY_COMMANDS

-# ------------------------------

-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],

-[{

- # Autoconf 2.62 quotes --file arguments for eval, but not when files

- # are listed without --file. Let's play safe and only enable the eval

- # if we detect the quoting.

- case $CONFIG_FILES in

- *\'*) eval set x "$CONFIG_FILES" ;;

- *) set x $CONFIG_FILES ;;

- esac

- shift

- for mf

- do

- # Strip MF so we end up with the name of the file.

- mf=`echo "$mf" | sed -e 's/:.*$//'`

- # Check whether this is an Automake generated Makefile or not.

- # We used to match only the files named `Makefile.in', but

- # some people rename them; so instead we look at the file content.

- # Grep'ing the first line is not enough: some people post-process

- # each Makefile.in and add a new line on top of each file to say so.

- # Grep'ing the whole file is not good either: AIX grep has a line

- # limit of 2048, but all sed's we know have understand at least 4000.

- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then

- dirpart=`AS_DIRNAME("$mf")`

- else

- continue

- fi

- # Extract the definition of DEPDIR, am__include, and am__quote

- # from the Makefile without running `make'.

- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`

- test -z "$DEPDIR" && continue

- am__include=`sed -n 's/^am__include = //p' < "$mf"`

- test -z "am__include" && continue

- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`

- # When using ansi2knr, U may be empty or an underscore; expand it

- U=`sed -n 's/^U = //p' < "$mf"`

- # Find all dependency output files, they are included files with

- # $(DEPDIR) in their names. We invoke sed twice because it is the

- # simplest approach to changing $(DEPDIR) to its actual value in the

- # expansion.

- for file in `sed -n "

- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \

- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do

- # Make sure the directory exists.

- test -f "$dirpart/$file" && continue

- fdir=`AS_DIRNAME(["$file"])`

- AS_MKDIR_P([$dirpart/$fdir])

- # echo "creating $dirpart/$file"

- echo '# dummy' > "$dirpart/$file"

- done

- done

-}

-])# _AM_OUTPUT_DEPENDENCY_COMMANDS

-

-

-# AM_OUTPUT_DEPENDENCY_COMMANDS

-# -----------------------------

-# This macro should only be invoked once -- use via AC_REQUIRE.

-#

-# This code is only required when automatic dependency tracking

-# is enabled. FIXME. This creates each `.P' file that we will

-# need in order to bootstrap the dependency handling code.

-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],

-[AC_CONFIG_COMMANDS([depfiles],

- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],

- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])

-])

-

-# Do all the work for Automake. -*- Autoconf -*-

-

-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,

-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 16

-

-# This macro actually does too much. Some checks are only needed if

-# your package does certain things. But this isn't really a big deal.

-

-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])

-# AM_INIT_AUTOMAKE([OPTIONS])

-# -----------------------------------------------

-# The call with PACKAGE and VERSION arguments is the old style

-# call (pre autoconf-2.50), which is being phased out. PACKAGE

-# and VERSION should now be passed to AC_INIT and removed from

-# the call to AM_INIT_AUTOMAKE.

-# We support both call styles for the transition. After

-# the next Automake release, Autoconf can make the AC_INIT

-# arguments mandatory, and then we can depend on a new Autoconf

-# release and drop the old call support.

-AC_DEFUN([AM_INIT_AUTOMAKE],

-[AC_PREREQ([2.62])dnl

-dnl Autoconf wants to disallow AM_ names. We explicitly allow

-dnl the ones we care about.

-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl

-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl

-AC_REQUIRE([AC_PROG_INSTALL])dnl

-if test "`cd $srcdir && pwd`" != "`pwd`"; then

- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output

- # is not polluted with repeated "-I."

- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl

- # test to see if srcdir already configured

- if test -f $srcdir/config.status; then

- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])

- fi

-fi

-

-# test whether we have cygpath

-if test -z "$CYGPATH_W"; then

- if (cygpath --version) >/dev/null 2>/dev/null; then

- CYGPATH_W='cygpath -w'

- else

- CYGPATH_W=echo

- fi

-fi

-AC_SUBST([CYGPATH_W])

-

-# Define the identity of the package.

-dnl Distinguish between old-style and new-style calls.

-m4_ifval([$2],

-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl

- AC_SUBST([PACKAGE], [$1])dnl

- AC_SUBST([VERSION], [$2])],

-[_AM_SET_OPTIONS([$1])dnl

-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.

-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,

- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl

- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl

- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl

-

-_AM_IF_OPTION([no-define],,

-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])

- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl

-

-# Some tools Automake needs.

-AC_REQUIRE([AM_SANITY_CHECK])dnl

-AC_REQUIRE([AC_ARG_PROGRAM])dnl

-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})

-AM_MISSING_PROG(AUTOCONF, autoconf)

-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})

-AM_MISSING_PROG(AUTOHEADER, autoheader)

-AM_MISSING_PROG(MAKEINFO, makeinfo)

-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl

-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl

-AC_REQUIRE([AM_PROG_MKDIR_P])dnl

-# We need awk for the "check" target. The system "awk" is bad on

-# some platforms.

-AC_REQUIRE([AC_PROG_AWK])dnl

-AC_REQUIRE([AC_PROG_MAKE_SET])dnl

-AC_REQUIRE([AM_SET_LEADING_DOT])dnl

-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],

- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],

- [_AM_PROG_TAR([v7])])])

-_AM_IF_OPTION([no-dependencies],,

-[AC_PROVIDE_IFELSE([AC_PROG_CC],

- [_AM_DEPENDENCIES(CC)],

- [define([AC_PROG_CC],

- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl

-AC_PROVIDE_IFELSE([AC_PROG_CXX],

- [_AM_DEPENDENCIES(CXX)],

- [define([AC_PROG_CXX],

- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl

-AC_PROVIDE_IFELSE([AC_PROG_OBJC],

- [_AM_DEPENDENCIES(OBJC)],

- [define([AC_PROG_OBJC],

- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl

-])

-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl

-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the

-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro

-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.

-AC_CONFIG_COMMANDS_PRE(dnl

-[m4_provide_if([_AM_COMPILER_EXEEXT],

- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl

-])

-

-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not

-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further

-dnl mangled by Autoconf and run in a shell conditional statement.

-m4_define([_AC_COMPILER_EXEEXT],

-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])

-

-

-# When config.status generates a header, we must update the stamp-h file.

-# This file resides in the same directory as the config header

-# that is generated. The stamp files are numbered to have different names.

-

-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the

-# loop where config.status creates the headers, so we can generate

-# our stamp files there.

-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],

-[# Compute $1's index in $config_headers.

-_am_arg=$1

-_am_stamp_count=1

-for _am_header in $config_headers :; do

- case $_am_header in

- $_am_arg | $_am_arg:* )

- break ;;

- * )

- _am_stamp_count=`expr $_am_stamp_count + 1` ;;

- esac

-done

-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])

-

-# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# AM_PROG_INSTALL_SH

-# ------------------

-# Define $install_sh.

-AC_DEFUN([AM_PROG_INSTALL_SH],

-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl

-if test x"${install_sh}" != xset; then

- case $am_aux_dir in

- *\ * | *\ *)

- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;

- *)

- install_sh="\${SHELL} $am_aux_dir/install-sh"

- esac

-fi

-AC_SUBST(install_sh)])

-

-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 2

-

-# Check whether the underlying file-system supports filenames

-# with a leading dot. For instance MS-DOS doesn't.

-AC_DEFUN([AM_SET_LEADING_DOT],

-[rm -rf .tst 2>/dev/null

-mkdir .tst 2>/dev/null

-if test -d .tst; then

- am__leading_dot=.

-else

- am__leading_dot=_

-fi

-rmdir .tst 2>/dev/null

-AC_SUBST([am__leading_dot])])

-

-# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-

-# From Jim Meyering

-

-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 5

-

-# AM_MAINTAINER_MODE([DEFAULT-MODE])

-# ----------------------------------

-# Control maintainer-specific portions of Makefiles.

-# Default is to disable them, unless `enable' is passed literally.

-# For symmetry, `disable' may be passed as well. Anyway, the user

-# can override the default with the --enable/--disable switch.

-AC_DEFUN([AM_MAINTAINER_MODE],

-[m4_case(m4_default([$1], [disable]),

- [enable], [m4_define([am_maintainer_other], [disable])],

- [disable], [m4_define([am_maintainer_other], [enable])],

- [m4_define([am_maintainer_other], [enable])

- m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])

-AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])

- dnl maintainer-mode's default is 'disable' unless 'enable' is passed

- AC_ARG_ENABLE([maintainer-mode],

-[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful

- (and sometimes confusing) to the casual installer],

- [USE_MAINTAINER_MODE=$enableval],

- [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))

- AC_MSG_RESULT([$USE_MAINTAINER_MODE])

- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])

- MAINT=$MAINTAINER_MODE_TRUE

- AC_SUBST([MAINT])dnl

-]

-)

-

-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])

-

-# Check to see how 'make' treats includes. -*- Autoconf -*-

-

-# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 4

-

-# AM_MAKE_INCLUDE()

-# -----------------

-# Check to see how make treats includes.

-AC_DEFUN([AM_MAKE_INCLUDE],

-[am_make=${MAKE-make}

-cat > confinc << 'END'

-am__doit:

- @echo this is the am__doit target

-.PHONY: am__doit

-END

-# If we don't find an include directive, just comment out the code.

-AC_MSG_CHECKING([for style of include used by $am_make])

-am__include="#"

-am__quote=

-_am_result=none

-# First try GNU make style include.

-echo "include confinc" > confmf

-# Ignore all kinds of additional output from `make'.

-case `$am_make -s -f confmf 2> /dev/null` in #(

-*the\ am__doit\ target*)

- am__include=include

- am__quote=

- _am_result=GNU

- ;;

-esac

-# Now try BSD make style include.

-if test "$am__include" = "#"; then

- echo '.include "confinc"' > confmf

- case `$am_make -s -f confmf 2> /dev/null` in #(

- *the\ am__doit\ target*)

- am__include=.include

- am__quote="\""

- _am_result=BSD

- ;;

- esac

-fi

-AC_SUBST([am__include])

-AC_SUBST([am__quote])

-AC_MSG_RESULT([$_am_result])

-rm -f confinc confmf

-])

-

-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-

-

-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 6

-

-# AM_MISSING_PROG(NAME, PROGRAM)

-# ------------------------------

-AC_DEFUN([AM_MISSING_PROG],

-[AC_REQUIRE([AM_MISSING_HAS_RUN])

-$1=${$1-"${am_missing_run}$2"}

-AC_SUBST($1)])

-

-

-# AM_MISSING_HAS_RUN

-# ------------------

-# Define MISSING if not defined so far and test if it supports --run.

-# If it does, set am_missing_run to use it, otherwise, to nothing.

-AC_DEFUN([AM_MISSING_HAS_RUN],

-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl

-AC_REQUIRE_AUX_FILE([missing])dnl

-if test x"${MISSING+set}" != xset; then

- case $am_aux_dir in

- *\ * | *\ *)

- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;

- *)

- MISSING="\${SHELL} $am_aux_dir/missing" ;;

- esac

-fi

-# Use eval to expand $SHELL

-if eval "$MISSING --run true"; then

- am_missing_run="$MISSING --run "

-else

- am_missing_run=

- AC_MSG_WARN([`missing' script is too old or missing])

-fi

-])

-

-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# AM_PROG_MKDIR_P

-# ---------------

-# Check for `mkdir -p'.

-AC_DEFUN([AM_PROG_MKDIR_P],

-[AC_PREREQ([2.60])dnl

-AC_REQUIRE([AC_PROG_MKDIR_P])dnl

-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,

-dnl while keeping a definition of mkdir_p for backward compatibility.

-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.

-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of

-dnl Makefile.ins that do not define MKDIR_P, so we do our own

-dnl adjustment using top_builddir (which is defined more often than

-dnl MKDIR_P).

-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl

-case $mkdir_p in

- [[\\/$]]* | ?:[[\\/]]*) ;;

- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;

-esac

-])

-

-# Helper functions for option handling. -*- Autoconf -*-

-

-# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 4

-

-# _AM_MANGLE_OPTION(NAME)

-# -----------------------

-AC_DEFUN([_AM_MANGLE_OPTION],

-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])

-

-# _AM_SET_OPTION(NAME)

-# ------------------------------

-# Set option NAME. Presently that only means defining a flag for this option.

-AC_DEFUN([_AM_SET_OPTION],

-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])

-

-# _AM_SET_OPTIONS(OPTIONS)

-# ----------------------------------

-# OPTIONS is a space-separated list of Automake options.

-AC_DEFUN([_AM_SET_OPTIONS],

-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])

-

-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])

-# -------------------------------------------

-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.

-AC_DEFUN([_AM_IF_OPTION],

-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])

-

-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008, 2009

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# AM_PATH_PYTHON([MINIMUM-VERSION], [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])

-# ---------------------------------------------------------------------------

-# Adds support for distributing Python modules and packages. To

-# install modules, copy them to $(pythondir), using the python_PYTHON

-# automake variable. To install a package with the same name as the

-# automake package, install to $(pkgpythondir), or use the

-# pkgpython_PYTHON automake variable.

-#

-# The variables $(pyexecdir) and $(pkgpyexecdir) are provided as

-# locations to install python extension modules (shared libraries).

-# Another macro is required to find the appropriate flags to compile

-# extension modules.

-#

-# If your package is configured with a different prefix to python,

-# users will have to add the install directory to the PYTHONPATH

-# environment variable, or create a .pth file (see the python

-# documentation for details).

-#

-# If the MINIMUM-VERSION argument is passed, AM_PATH_PYTHON will

-# cause an error if the version of python installed on the system

-# doesn't meet the requirement. MINIMUM-VERSION should consist of

-# numbers and dots only.

-AC_DEFUN([AM_PATH_PYTHON],

- [

- dnl Find a Python interpreter. Python versions prior to 2.0 are not

- dnl supported. (2.0 was released on October 16, 2000).

- m4_define_default([_AM_PYTHON_INTERPRETER_LIST],

- [python python2 python3 python3.0 python2.5 python2.4 python2.3 python2.2 dnl

-python2.1 python2.0])

-

- m4_if([$1],[],[

- dnl No version check is needed.

- # Find any Python interpreter.

- if test -z "$PYTHON"; then

- AC_PATH_PROGS([PYTHON], _AM_PYTHON_INTERPRETER_LIST, :)

- fi

- am_display_PYTHON=python

- ], [

- dnl A version check is needed.

- if test -n "$PYTHON"; then

- # If the user set $PYTHON, use it and don't search something else.

- AC_MSG_CHECKING([whether $PYTHON version >= $1])

- AM_PYTHON_CHECK_VERSION([$PYTHON], [$1],

- [AC_MSG_RESULT(yes)],

- [AC_MSG_ERROR(too old)])

- am_display_PYTHON=$PYTHON

- else

- # Otherwise, try each interpreter until we find one that satisfies

- # VERSION.

- AC_CACHE_CHECK([for a Python interpreter with version >= $1],

- [am_cv_pathless_PYTHON],[

- for am_cv_pathless_PYTHON in _AM_PYTHON_INTERPRETER_LIST none; do

- test "$am_cv_pathless_PYTHON" = none && break

- AM_PYTHON_CHECK_VERSION([$am_cv_pathless_PYTHON], [$1], [break])

- done])

- # Set $PYTHON to the absolute path of $am_cv_pathless_PYTHON.

- if test "$am_cv_pathless_PYTHON" = none; then

- PYTHON=:

- else

- AC_PATH_PROG([PYTHON], [$am_cv_pathless_PYTHON])

- fi

- am_display_PYTHON=$am_cv_pathless_PYTHON

- fi

- ])

-

- if test "$PYTHON" = :; then

- dnl Run any user-specified action, or abort.

- m4_default([$3], [AC_MSG_ERROR([no suitable Python interpreter found])])

- else

-

- dnl Query Python for its version number. Getting [:3] seems to be

- dnl the best way to do this; it's what "site.py" does in the standard

- dnl library.

-

- AC_CACHE_CHECK([for $am_display_PYTHON version], [am_cv_python_version],

- [am_cv_python_version=`$PYTHON -c "import sys; sys.stdout.write(sys.version[[:3]])"`])

- AC_SUBST([PYTHON_VERSION], [$am_cv_python_version])

-

- dnl Use the values of $prefix and $exec_prefix for the corresponding

- dnl values of PYTHON_PREFIX and PYTHON_EXEC_PREFIX. These are made

- dnl distinct variables so they can be overridden if need be. However,

- dnl general consensus is that you shouldn't need this ability.

-

- AC_SUBST([PYTHON_PREFIX], ['${prefix}'])

- AC_SUBST([PYTHON_EXEC_PREFIX], ['${exec_prefix}'])

-

- dnl At times (like when building shared libraries) you may want

- dnl to know which OS platform Python thinks this is.

-

- AC_CACHE_CHECK([for $am_display_PYTHON platform], [am_cv_python_platform],

- [am_cv_python_platform=`$PYTHON -c "import sys; sys.stdout.write(sys.platform)"`])

- AC_SUBST([PYTHON_PLATFORM], [$am_cv_python_platform])

-

-

- dnl Set up 4 directories:

-

- dnl pythondir -- where to install python scripts. This is the

- dnl site-packages directory, not the python standard library

- dnl directory like in previous automake betas. This behavior

- dnl is more consistent with lispdir.m4 for example.

- dnl Query distutils for this directory. distutils does not exist in

- dnl Python 1.5, so we fall back to the hardcoded directory if it

- dnl doesn't work.

- AC_CACHE_CHECK([for $am_display_PYTHON script directory],

- [am_cv_python_pythondir],

- [if test "x$prefix" = xNONE

- then

- am_py_prefix=$ac_default_prefix

- else

- am_py_prefix=$prefix

- fi

- am_cv_python_pythondir=`$PYTHON -c "import sys; from distutils import sysconfig; sys.stdout.write(sysconfig.get_python_lib(0,0,prefix='$am_py_prefix'))" 2>/dev/null ||

- echo "$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages"`

- case $am_cv_python_pythondir in

- $am_py_prefix*)

- am__strip_prefix=`echo "$am_py_prefix" | sed 's|.|.|g'`

- am_cv_python_pythondir=`echo "$am_cv_python_pythondir" | sed "s,^$am__strip_prefix,$PYTHON_PREFIX,"`

- ;;

- *)

- case $am_py_prefix in

- /usr|/System*) ;;

- *)

- am_cv_python_pythondir=$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages

- ;;

- esac

- ;;

- esac

- ])

- AC_SUBST([pythondir], [$am_cv_python_pythondir])

-

- dnl pkgpythondir -- $PACKAGE directory under pythondir. Was

- dnl PYTHON_SITE_PACKAGE in previous betas, but this naming is

- dnl more consistent with the rest of automake.

-

- AC_SUBST([pkgpythondir], [\${pythondir}/$PACKAGE])

-

- dnl pyexecdir -- directory for installing python extension modules

- dnl (shared libraries)

- dnl Query distutils for this directory. distutils does not exist in

- dnl Python 1.5, so we fall back to the hardcoded directory if it

- dnl doesn't work.

- AC_CACHE_CHECK([for $am_display_PYTHON extension module directory],

- [am_cv_python_pyexecdir],

- [if test "x$exec_prefix" = xNONE

- then

- am_py_exec_prefix=$am_py_prefix

- else

- am_py_exec_prefix=$exec_prefix

- fi

- am_cv_python_pyexecdir=`$PYTHON -c "import sys; from distutils import sysconfig; sys.stdout.write(sysconfig.get_python_lib(1,0,prefix='$am_py_exec_prefix'))" 2>/dev/null ||

- echo "$PYTHON_EXEC_PREFIX/lib/python$PYTHON_VERSION/site-packages"`

- case $am_cv_python_pyexecdir in

- $am_py_exec_prefix*)

- am__strip_prefix=`echo "$am_py_exec_prefix" | sed 's|.|.|g'`

- am_cv_python_pyexecdir=`echo "$am_cv_python_pyexecdir" | sed "s,^$am__strip_prefix,$PYTHON_EXEC_PREFIX,"`

- ;;

- *)

- case $am_py_exec_prefix in

- /usr|/System*) ;;

- *)

- am_cv_python_pyexecdir=$PYTHON_EXEC_PREFIX/lib/python$PYTHON_VERSION/site-packages

- ;;

- esac

- ;;

- esac

- ])

- AC_SUBST([pyexecdir], [$am_cv_python_pyexecdir])

-

- dnl pkgpyexecdir -- $(pyexecdir)/$(PACKAGE)

-

- AC_SUBST([pkgpyexecdir], [\${pyexecdir}/$PACKAGE])

-

- dnl Run any user-specified action.

- $2

- fi

-

-])

-

-

-# AM_PYTHON_CHECK_VERSION(PROG, VERSION, [ACTION-IF-TRUE], [ACTION-IF-FALSE])

-# ---------------------------------------------------------------------------

-# Run ACTION-IF-TRUE if the Python interpreter PROG has version >= VERSION.

-# Run ACTION-IF-FALSE otherwise.

-# This test uses sys.hexversion instead of the string equivalent (first

-# word of sys.version), in order to cope with versions such as 2.2c1.

-# This supports Python 2.0 or higher. (2.0 was released on October 16, 2000).

-AC_DEFUN([AM_PYTHON_CHECK_VERSION],

- [prog="import sys

-# split strings by '.' and convert to numeric. Append some zeros

-# because we need at least 4 digits for the hex conversion.

-# map returns an iterator in Python 3.0 and a list in 2.x

-minver = list(map(int, '$2'.split('.'))) + [[0, 0, 0]]

-minverhex = 0

-# xrange is not present in Python 3.0 and range returns an iterator

-for i in list(range(0, 4)): minverhex = (minverhex << 8) + minver[[i]]

-sys.exit(sys.hexversion < minverhex)"

- AS_IF([AM_RUN_LOG([$1 -c "$prog"])], [$3], [$4])])

-

-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# AM_RUN_LOG(COMMAND)

-# -------------------

-# Run COMMAND, save the exit status in ac_status, and log it.

-# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)

-AC_DEFUN([AM_RUN_LOG],

-[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD

- ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD

- ac_status=$?

- echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD

- (exit $ac_status); }])

-

-# Check to make sure that the build environment is sane. -*- Autoconf -*-

-

-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008

-# Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 5

-

-# AM_SANITY_CHECK

-# ---------------

-AC_DEFUN([AM_SANITY_CHECK],

-[AC_MSG_CHECKING([whether build environment is sane])

-# Just in case

-sleep 1

-echo timestamp > conftest.file

-# Reject unsafe characters in $srcdir or the absolute working directory

-# name. Accept space and tab only in the latter.

-am_lf='

-'

-case `pwd` in

- *[[\\\"\#\$\&\'\`$am_lf]]*)

- AC_MSG_ERROR([unsafe absolute working directory name]);;

-esac

-case $srcdir in

- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)

- AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;

-esac

-

-# Do `set' in a subshell so we don't clobber the current shell's

-# arguments. Must try -L first in case configure is actually a

-# symlink; some systems play weird games with the mod time of symlinks

-# (eg FreeBSD returns the mod time of the symlink's containing

-# directory).

-if (

- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`

- if test "$[*]" = "X"; then

- # -L didn't work.

- set X `ls -t "$srcdir/configure" conftest.file`

- fi

- rm -f conftest.file

- if test "$[*]" != "X $srcdir/configure conftest.file" \

- && test "$[*]" != "X conftest.file $srcdir/configure"; then

-

- # If neither matched, then we have a broken ls. This can happen

- # if, for instance, CONFIG_SHELL is bash and it inherits a

- # broken ls alias from the environment. This has actually

- # happened. Such a system could not be considered "sane".

- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken

-alias in your environment])

- fi

-

- test "$[2]" = conftest.file

- )

-then

- # Ok.

- :

-else

- AC_MSG_ERROR([newly created file is older than distributed files!

-Check your system clock])

-fi

-AC_MSG_RESULT(yes)])

-

-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# AM_PROG_INSTALL_STRIP

-# ---------------------

-# One issue with vendor `install' (even GNU) is that you can't

-# specify the program used to strip binaries. This is especially

-# annoying in cross-compiling environments, where the build's strip

-# is unlikely to handle the host's binaries.

-# Fortunately install-sh will honor a STRIPPROG variable, so we

-# always use install-sh in `make install-strip', and initialize

-# STRIPPROG with the value of the STRIP variable (set by the user).

-AC_DEFUN([AM_PROG_INSTALL_STRIP],

-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl

-# Installed binaries are usually stripped using `strip' when the user

-# run `make install-strip'. However `strip' might not be the right

-# tool to use in cross-compilation environments, therefore Automake

-# will honor the `STRIP' environment variable to overrule this program.

-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.

-if test "$cross_compiling" != no; then

- AC_CHECK_TOOL([STRIP], [strip], :)

-fi

-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"

-AC_SUBST([INSTALL_STRIP_PROGRAM])])

-

-# Copyright (C) 2006, 2008 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 2

-

-# _AM_SUBST_NOTMAKE(VARIABLE)

-# ---------------------------

-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.

-# This macro is traced by Automake.

-AC_DEFUN([_AM_SUBST_NOTMAKE])

-

-# AM_SUBST_NOTMAKE(VARIABLE)

-# ---------------------------

-# Public sister of _AM_SUBST_NOTMAKE.

-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])

-

-# Check how to create a tarball. -*- Autoconf -*-

-

-# Copyright (C) 2004, 2005 Free Software Foundation, Inc.

-#

-# This file is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-

-# serial 2

-

-# _AM_PROG_TAR(FORMAT)

-# --------------------

-# Check how to create a tarball in format FORMAT.

-# FORMAT should be one of `v7', `ustar', or `pax'.

-#

-# Substitute a variable $(am__tar) that is a command

-# writing to stdout a FORMAT-tarball containing the directory

-# $tardir.

-# tardir=directory && $(am__tar) > result.tar

-#

-# Substitute a variable $(am__untar) that extract such

-# a tarball read from stdin.

-# $(am__untar) < result.tar

-AC_DEFUN([_AM_PROG_TAR],

-[# Always define AMTAR for backward compatibility.

-AM_MISSING_PROG([AMTAR], [tar])

-m4_if([$1], [v7],

- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],

- [m4_case([$1], [ustar],, [pax],,

- [m4_fatal([Unknown tar format])])

-AC_MSG_CHECKING([how to create a $1 tar archive])

-# Loop over all known methods to create a tar archive until one works.

-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'

-_am_tools=${am_cv_prog_tar_$1-$_am_tools}

-# Do not fold the above two line into one, because Tru64 sh and

-# Solaris sh will not grok spaces in the rhs of `-'.

-for _am_tool in $_am_tools

-do

- case $_am_tool in

- gnutar)

- for _am_tar in tar gnutar gtar;

- do

- AM_RUN_LOG([$_am_tar --version]) && break

- done

- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'

- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'

- am__untar="$_am_tar -xf -"

- ;;

- plaintar)

- # Must skip GNU tar: if it does not support --format= it doesn't create

- # ustar tarball either.

- (tar --version) >/dev/null 2>&1 && continue

- am__tar='tar chf - "$$tardir"'

- am__tar_='tar chf - "$tardir"'

- am__untar='tar xf -'

- ;;

- pax)

- am__tar='pax -L -x $1 -w "$$tardir"'

- am__tar_='pax -L -x $1 -w "$tardir"'

- am__untar='pax -r'

- ;;

- cpio)

- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'

- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'

- am__untar='cpio -i -H $1 -d'

- ;;

- none)

- am__tar=false

- am__tar_=false

- am__untar=false

- ;;

- esac

-

- # If the value was cached, stop now. We just wanted to have am__tar

- # and am__untar set.

- test -n "${am_cv_prog_tar_$1}" && break

-

- # tar/untar a dummy directory, and stop if the command works

- rm -rf conftest.dir

- mkdir conftest.dir

- echo GrepMe > conftest.dir/file

- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])

- rm -rf conftest.dir

- if test -s conftest.tar; then

- AM_RUN_LOG([$am__untar <conftest.tar])

- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break

- fi

-done

-rm -rf conftest.dir

-

-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])

-AC_MSG_RESULT([$am_cv_prog_tar_$1])])

-AC_SUBST([am__tar])

-AC_SUBST([am__untar])

-]) # _AM_PROG_TAR

-

-m4_include([acinclude.m4])