summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorPerberos <[email protected]>2012-01-27 09:04:25 -0300
committerPerberos <[email protected]>2012-01-27 09:04:25 -0300
commitea9dffce8aa379670e983669562b00435f8316ba (patch)
tree13af65da50f05d93fdee73288257bb2c9d79f85a /doc
parente0a48baf161a51e7a61ffdf61e8c60050c9472f5 (diff)
downloadmate-panel-ea9dffce8aa379670e983669562b00435f8316ba.tar.bz2
mate-panel-ea9dffce8aa379670e983669562b00435f8316ba.tar.xz
removing autogenerated files
Diffstat (limited to 'doc')
-rw-r--r--doc/Makefile.in676
-rw-r--r--doc/reference/Makefile.in672
-rw-r--r--doc/reference/mate-panel-applet/Makefile.in804
3 files changed, 0 insertions, 2152 deletions
diff --git a/doc/Makefile.in b/doc/Makefile.in
deleted file mode 100644
index f9aa7b95..00000000
--- a/doc/Makefile.in
+++ /dev/null
@@ -1,676 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-pkgdatadir = $(datadir)/@[email protected]
-pkgincludedir = $(includedir)/@[email protected]
-pkglibdir = $(libdir)/@[email protected]
-pkglibexecdir = $(libexecdir)/@[email protected]
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @[email protected]
-host_triplet = @[email protected]
-subdir = doc
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/d-type.m4 \
- $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/intltool.m4 \
- $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
- $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
- $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/m4/mate-doc-utils.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo " GEN " [email protected];
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-ACLOCAL = @[email protected]
-ACLOCAL_AMFLAGS = @[email protected]
-ALL_LINGUAS = @[email protected]
-AM_DEFAULT_VERBOSITY = @[email protected]
-AUTOCONF = @[email protected]
-AUTOHEADER = @[email protected]
-AUTOMAKE = @[email protected]
-CATALOGS = @[email protected]
-CATOBJEXT = @[email protected]
-CCDEPMODE = @[email protected]
-CLOCK_CFLAGS = @[email protected]
-CLOCK_EDS_ICONDIR = @[email protected]
-CLOCK_LIBS = @[email protected]
-CPPFLAGS = @[email protected]
-CYGPATH_W = @[email protected]
-DATADIRNAME = @[email protected]
-DISABLE_DEPRECATED = @[email protected]
-DISABLE_DEPRECATED_CFLAGS = @[email protected]
-DISTCHECK_CONFIGURE_FLAGS = @[email protected]
-DLLTOOL = @[email protected]
-DOC_USER_FORMATS = @[email protected]
-DSYMUTIL = @[email protected]
-DUMPBIN = @[email protected]
-EGG_SMCLIENT_CFLAGS = @[email protected]
-EGG_SMCLIENT_LIBS = @[email protected]
-FISH_CFLAGS = @[email protected]
-FISH_LIBS = @[email protected]
-GETTEXT_PACKAGE = @[email protected]
-GIO_QUERYMODULES = @[email protected]
-GLIB_GENMARSHAL = @[email protected]
-GMOFILES = @GMOF[email protected]
-GMSGFMT = @[email protected]
-GTKDOC_CHECK = @[email protected]
-GTKDOC_DEPS_CFLAGS = @[email protected]
-GTKDOC_DEPS_LIBS = @[email protected]
-GTKDOC_MKPDF = @[email protected]
-GTKDOC_REBASE = @[email protected]
-HELP_DIR = @[email protected]
-HTML_DIR = @[email protected]
-INSTALL = @[email protected]
-INSTALL_DATA = @[email protected]
-INSTALL_PROGRAM = @[email protected]
-INSTALL_SCRIPT = @[email protected]
-INSTALL_STRIP_PROGRAM = @[email protected]
-INSTOBJEXT = @[email protected]
-INTLLIBS = @[email protected]
-INTLTOOL_EXTRACT = @[email protected]
-INTLTOOL_MERGE = @[email protected]
-INTLTOOL_PERL = @[email protected]
-INTLTOOL_UPDATE = @[email protected]
-INTROSPECTION_CFLAGS = @[email protected]
-INTROSPECTION_COMPILER = @[email protected]
-INTROSPECTION_GENERATE = @[email protected]
-INTROSPECTION_GIRDIR = @[email protected]
-INTROSPECTION_LIBS = @[email protected]
-INTROSPECTION_MAKEFILE = @[email protected]
-INTROSPECTION_SCANNER = @[email protected]
-INTROSPECTION_TYPELIBDIR = @[email protected]
-LDFLAGS = @[email protected]
-LIBMATE_PANEL_APPLET_CFLAGS = @[email protected]
-LIBMATE_PANEL_APPLET_LIBS = @[email protected]
-LIBMATE_PANEL_APPLET_MATECOMPONENT_CFLAGS = @[email protected]
-LIBMATE_PANEL_APPLET_MATECOMPONENT_LIBS = @[email protected]
-LIBOBJS = @[email protected]
-LIBTOOL = @[email protected]
-LIB_MATE_PANEL_APPLET_LT_VERSION = @[email protected]
-LIB_MATE_PANEL_APPLET_MATECOMPONENT_LT_VERSION = @[email protected]
-LTLIBOBJS = @[email protected]
-MAKEINFO = @[email protected]
-MANIFEST_TOOL = @[email protected]
-MATECOMPONENT_ACT_IDLDIR = @[email protected]
-MATECOMPONENT_CFLAGS = @[email protected]
-MATECOMPONENT_IDLDIR = @[email protected]
-MATECOMPONENT_LIBS = @[email protected]
-MATECONFTOOL = @[email protected]
-MATECONF_SCHEMA_CONFIG_SOURCE = @[email protected]
-MATECONF_SCHEMA_FILE_DIR = @[email protected]
-MATECORBA_IDL = @[email protected]
-MKDIR_P = @[email protected]
-MKINSTALLDIRS = @[email protected]
-MSGFMT_OPTS = @[email protected]
-MSGMERGE = @[email protected]
-NETWORK_MANAGER_CFLAGS = @[email protected]
-NETWORK_MANAGER_LIBS = @[email protected]
-NOTIFICATION_AREA_CFLAGS = @[email protected]
-NOTIFICATION_AREA_LIBS = @[email protected]
-OBJDUMP = @[email protected]
-OMF_DIR = @[email protected]
-OTOOL64 = @[email protected]
-PACKAGE = @PACKA[email protected]
-PACKAGE_BUGREPORT = @[email protected]
-PACKAGE_NAME = @[email protected]
-PACKAGE_STRING = @[email protected]
-PACKAGE_TARNAME = @[email protected]
-PACKAGE_URL = @[email protected]
-PACKAGE_VERSION = @[email protected]
-PANEL_CFLAGS = @[email protected]
-PANEL_INTLTOOL_MATE_PANEL_APPLET_RULE = @[email protected]
-PANEL_LIBS = @[email protected]
-PANEL_MODULE_MATECOMPONENT_CFLAGS = @[email protected]
-PANEL_MODULE_MATECOMPONENT_LIBS = @[email protected]
-PATH_SEPARATOR = @[email protected]
-PKG_CONFIG = @[email protected]
-PKG_CONFIG_LIBDIR = @[email protected]
-PKG_CONFIG_PATH = @[email protected]
-POFILES = @[email protected]
-PO_IN_DATADIR_FALSE = @[email protected]
-PO_IN_DATADIR_TRUE = @[email protected]
-PYTHON_EXEC_PREFIX = @[email protected]
-PYTHON_PLATFORM = @[email protected]
-PYTHON_PREFIX = @[email protected]
-PYTHON_VERSION = @[email protected]
-REBUILD = @[email protected]
-SET_MAKE = @[email protected]
-TZ_CFLAGS = @[email protected]
-TZ_LIBS = @[email protected]
-USE_NLS = @[email protected]
-VERSION = @[email protected]
-WARN_CFLAGS = @[email protected]
-WNCKLET_CFLAGS = @[email protected]
-WNCKLET_LIBS = @[email protected]
-XGETTEXT = @[email protected]
-XRANDR_CFLAGS = @[email protected]
-XRANDR_LIBS = @[email protected]
-X_CFLAGS = @[email protected]
-X_EXTRA_LIBS = @[email protected]
-X_PRE_LIBS = @[email protected]
-abs_builddir = @[email protected]
-abs_srcdir = @[email protected]
-abs_top_builddir = @[email protected]
-abs_top_srcdir = @[email protected]
-ac_ct_AR = @[email protected]
-ac_ct_CC = @[email protected]
-ac_ct_DUMPBIN = @[email protected]
-am__include = @[email protected]
-am__leading_dot = @[email protected]
-am__quote = @[email protected]
-am__tar = @[email protected]
-am__untar = @[email protected]
-appletsdir = @[email protected]
-build_alias = @[email protected]
-build_cpu = @[email protected]
-build_os = @[email protected]
-build_vendor = @[email protected]
-builddir = @[email protected]
-datadir = @[email protected]
-datarootdir = @[email protected]
-exec_prefix = @[email protected]
-host_alias = @[email protected]
-host_cpu = @[email protected]
-host_os = @[email protected]
-host_vendor = @[email protected]
-htmldir = @[email protected]
-includedir = @[email protected]
-infodir = @[email protected]
-install_sh = @[email protected]
-libexecdir = @[email protected]
-localedir = @[email protected]
-localstatedir = @[email protected]
-mkdir_p = @[email protected]
-modulesdir = @[email protected]
-oldincludedir = @[email protected]
-pkgpyexecdir = @[email protected]
-pkgpythondir = @[email protected]
-program_transform_name = @[email protected]
-pyexecdir = @[email protected]
-pythondir = @[email protected]
-sbindir = @[email protected]
-sharedstatedir = @[email protected]
-sysconfdir = @[email protected]
-target_alias = @[email protected]
-top_build_prefix = @[email protected]
-top_builddir = @[email protected]
-top_srcdir = @[email protected]
-SUBDIRS = reference
-EXTRA_DIST = \
- panel-session-handling.txt \
- panel-keynav.txt
-
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @[email protected] $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f [email protected]; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu doc/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/[email protected] $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/[email protected] $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @[email protected] $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @[email protected] $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo [email protected] | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "[email protected]" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo [email protected] | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "[email protected]" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "[email protected]" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
- install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am check check-am clean clean-generic clean-libtool \
- ctags ctags-recursive distclean distclean-generic \
- distclean-libtool distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am
-
-
--include $(top_srcdir)/git.mk
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/doc/reference/Makefile.in b/doc/reference/Makefile.in
deleted file mode 100644
index 71fda978..00000000
--- a/doc/reference/Makefile.in
+++ /dev/null
@@ -1,672 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-pkgdatadir = $(datadir)/@[email protected]
-pkgincludedir = $(includedir)/@[email protected]
-pkglibdir = $(libdir)/@[email protected]
-pkglibexecdir = $(libexecdir)/@[email protected]
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @[email protected]
-host_triplet = @[email protected]
-subdir = doc/reference
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/d-type.m4 \
- $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/intltool.m4 \
- $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
- $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
- $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/m4/mate-doc-utils.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo " GEN " [email protected];
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-ACLOCAL = @[email protected]
-ACLOCAL_AMFLAGS = @[email protected]
-ALL_LINGUAS = @[email protected]
-AM_DEFAULT_VERBOSITY = @[email protected]
-AUTOCONF = @[email protected]
-AUTOHEADER = @[email protected]
-AUTOMAKE = @[email protected]
-CATALOGS = @[email protected]
-CATOBJEXT = @[email protected]
-CCDEPMODE = @[email protected]
-CLOCK_CFLAGS = @[email protected]
-CLOCK_EDS_ICONDIR = @[email protected]
-CLOCK_LIBS = @[email protected]
-CPPFLAGS = @[email protected]
-CYGPATH_W = @[email protected]
-DATADIRNAME = @[email protected]
-DISABLE_DEPRECATED = @[email protected]
-DISABLE_DEPRECATED_CFLAGS = @[email protected]
-DISTCHECK_CONFIGURE_FLAGS = @[email protected]
-DLLTOOL = @[email protected]
-DOC_USER_FORMATS = @[email protected]
-DSYMUTIL = @[email protected]
-DUMPBIN = @[email protected]
-EGG_SMCLIENT_CFLAGS = @[email protected]
-EGG_SMCLIENT_LIBS = @[email protected]
-EGREP = @EGRE[email protected]
-FISH_CFLAGS = @[email protected]
-FISH_LIBS = @[email protected]
-GETTEXT_PACKAGE = @[email protected]
-GIO_QUERYMODULES = @[email protected]
-GLIB_GENMARSHAL = @[email protected]
-GMOFILES = @[email protected]
-GMSGFMT = @[email protected]
-GTKDOC_CHECK = @[email protected]
-GTKDOC_DEPS_CFLAGS = @[email protected]
-GTKDOC_DEPS_LIBS = @[email protected]
-GTKDOC_MKPDF = @[email protected]
-GTKDOC_REBASE = @[email protected]
-HELP_DIR = @[email protected]
-HTML_DIR = @[email protected]
-INSTALL = @[email protected]
-INSTALL_DATA = @[email protected]
-INSTALL_PROGRAM = @[email protected]
-INSTALL_SCRIPT = @[email protected]
-INSTALL_STRIP_PROGRAM = @[email protected]
-INSTOBJEXT = @[email protected]
-INTLLIBS = @[email protected]
-INTLTOOL_EXTRACT = @[email protected]
-INTLTOOL_MERGE = @[email protected]
-INTLTOOL_PERL = @[email protected]
-INTLTOOL_UPDATE = @[email protected]
-INTROSPECTION_CFLAGS = @[email protected]
-INTROSPECTION_COMPILER = @[email protected]
-INTROSPECTION_GENERATE = @[email protected]
-INTROSPECTION_GIRDIR = @[email protected]
-INTROSPECTION_LIBS = @[email protected]
-INTROSPECTION_MAKEFILE = @[email protected]
-INTROSPECTION_SCANNER = @[email protected]
-INTROSPECTION_TYPELIBDIR = @[email protected]
-LDFLAGS = @[email protected]
-LIBMATE_PANEL_APPLET_CFLAGS = @[email protected]
-LIBMATE_PANEL_APPLET_LIBS = @[email protected]
-LIBMATE_PANEL_APPLET_MATECOMPONENT_CFLAGS = @[email protected]
-LIBMATE_PANEL_APPLET_MATECOMPONENT_LIBS = @[email protected]
-LIBOBJS = @[email protected]
-LIBTOOL = @[email protected]
-LIB_MATE_PANEL_APPLET_LT_VERSION = @[email protected]
-LIB_MATE_PANEL_APPLET_MATECOMPONENT_LT_VERSION = @[email protected]
-LTLIBOBJS = @[email protected]
-MAKEINFO = @[email protected]
-MANIFEST_TOOL = @[email protected]
-MATECOMPONENT_ACT_IDLDIR = @[email protected]
-MATECOMPONENT_CFLAGS = @[email protected]
-MATECOMPONENT_IDLDIR = @[email protected]
-MATECOMPONENT_LIBS = @[email protected]
-MATECONFTOOL = @[email protected]
-MATECONF_SCHEMA_CONFIG_SOURCE = @[email protected]
-MATECONF_SCHEMA_FILE_DIR = @[email protected]
-MATECORBA_IDL = @[email protected]
-MKDIR_P = @[email protected]
-MKINSTALLDIRS = @[email protected]
-MSGFMT_OPTS = @[email protected]
-MSGMERGE = @[email protected]
-NETWORK_MANAGER_CFLAGS = @[email protected]
-NETWORK_MANAGER_LIBS = @[email protected]
-NOTIFICATION_AREA_CFLAGS = @[email protected]
-NOTIFICATION_AREA_LIBS = @[email protected]
-OBJDUMP = @[email protected]
-OMF_DIR = @[email protected]
-OTOOL64 = @[email protected]
-PACKAGE = @[email protected]
-PACKAGE_BUGREPORT = @[email protected]
-PACKAGE_NAME = @[email protected]
-PACKAGE_STRING = @[email protected]
-PACKAGE_TARNAME = @[email protected]
-PACKAGE_URL = @[email protected]
-PACKAGE_VERSION = @[email protected]
-PANEL_CFLAGS = @[email protected]
-PANEL_INTLTOOL_MATE_PANEL_APPLET_RULE = @[email protected]
-PANEL_LIBS = @[email protected]
-PANEL_MODULE_MATECOMPONENT_CFLAGS = @[email protected]
-PANEL_MODULE_MATECOMPONENT_LIBS = @[email protected]
-PATH_SEPARATOR = @[email protected]
-PKG_CONFIG = @[email protected]
-PKG_CONFIG_LIBDIR = @[email protected]
-PKG_CONFIG_PATH = @[email protected]
-POFILES = @[email protected]
-PO_IN_DATADIR_FALSE = @[email protected]
-PO_IN_DATADIR_TRUE = @[email protected]
-PYTHON_EXEC_PREFIX = @[email protected]
-PYTHON_PLATFORM = @[email protected]
-PYTHON_PREFIX = @[email protected]
-PYTHON_VERSION = @[email protected]
-REBUILD = @[email protected]
-SET_MAKE = @[email protected]
-TZ_CFLAGS = @[email protected]
-TZ_LIBS = @[email protected]
-USE_NLS = @[email protected]
-VERSION = @[email protected]
-WARN_CFLAGS = @[email protected]
-WNCKLET_CFLAGS = @[email protected]
-WNCKLET_LIBS = @[email protected]
-XGETTEXT = @[email protected]
-XRANDR_CFLAGS = @[email protected]
-XRANDR_LIBS = @[email protected]
-X_CFLAGS = @[email protected]
-X_EXTRA_LIBS = @[email protected]
-X_PRE_LIBS = @[email protected]
-abs_builddir = @[email protected]
-abs_srcdir = @[email protected]
-abs_top_builddir = @[email protected]
-abs_top_srcdir = @[email protected]
-ac_ct_AR = @[email protected]
-ac_ct_CC = @[email protected]
-ac_ct_DUMPBIN = @[email protected]
-am__include = @[email protected]
-am__leading_dot = @[email protected]
-am__quote = @[email protected]
-am__tar = @[email protected]
-am__untar = @[email protected]
-appletsdir = @[email protected]
-build_alias = @[email protected]
-build_cpu = @[email protected]
-build_os = @[email protected]
-build_vendor = @[email protected]
-builddir = @[email protected]
-datadir = @[email protected]
-datarootdir = @[email protected]
-exec_prefix = @[email protected]
-host_alias = @[email protected]
-host_cpu = @[email protected]
-host_os = @[email protected]
-host_vendor = @[email protected]
-htmldir = @[email protected]
-includedir = @[email protected]
-infodir = @[email protected]
-install_sh = @[email protected]
-libexecdir = @[email protected]
-localedir = @[email protected]
-localstatedir = @[email protected]
-mkdir_p = @[email protected]
-modulesdir = @[email protected]
-oldincludedir = @[email protected]
-pkgpyexecdir = @[email protected]
-pkgpythondir = @[email protected]
-program_transform_name = @[email protected]
-pyexecdir = @[email protected]
-pythondir = @[email protected]
-sbindir = @[email protected]
-sharedstatedir = @[email protected]
-sysconfdir = @[email protected]
-target_alias = @[email protected]
-top_build_prefix = @[email protected]
-top_builddir = @[email protected]
-top_srcdir = @[email protected]
-SUBDIRS = mate-panel-applet
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @[email protected] $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f [email protected]; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/reference/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu doc/reference/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/[email protected] $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/[email protected] $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @[email protected] $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @[email protected] $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo [email protected] | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "[email protected]" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo [email protected] | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "[email protected]" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "[email protected]" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
- install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am check check-am clean clean-generic clean-libtool \
- ctags ctags-recursive distclean distclean-generic \
- distclean-libtool distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am
-
-
--include $(top_srcdir)/git.mk
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/doc/reference/mate-panel-applet/Makefile.in b/doc/reference/mate-panel-applet/Makefile.in
deleted file mode 100644
index e65c93af..00000000
--- a/doc/reference/mate-panel-applet/Makefile.in
+++ /dev/null
@@ -1,804 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-# -*- mode: makefile -*-
-
-####################################
-# Everything below here is generic #
-####################################
-pkgdatadir = $(datadir)/@[email protected]
-pkgincludedir = $(includedir)/@[email protected]
-pkglibdir = $(libdir)/@[email protected]
-pkglibexecdir = $(libexecdir)/@[email protected]
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @[email protected]
-host_triplet = @[email protected]
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(top_srcdir)/gtk-doc.make
-subdir = doc/reference/mate-panel-applet
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/d-type.m4 \
- $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/intltool.m4 \
- $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
- $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
- $(top_srcdir)/m4/lt~obsolete.m4 \
- $(top_srcdir)/m4/mate-doc-utils.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo " GEN " [email protected];
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
-SOURCES =
-DIST_SOURCES =
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @[email protected]
-ACLOCAL_AMFLAGS = @[email protected]
-ALL_LINGUAS = @[email protected]
-AM_DEFAULT_VERBOSITY = @[email protected]
-AUTOCONF = @[email protected]
-AUTOHEADER = @[email protected]
-AUTOMAKE = @[email protected]
-CATALOGS = @[email protected]
-CATOBJEXT = @[email protected]
-CCDEPMODE = @[email protected]
-CLOCK_CFLAGS = @[email protected]
-CLOCK_EDS_ICONDIR = @[email protected]
-CLOCK_LIBS = @[email protected]
-CPPFLAGS = @[email protected]
-CYGPATH_W = @[email protected]
-DATADIRNAME = @[email protected]
-DISABLE_DEPRECATED = @[email protected]
-DISABLE_DEPRECATED_CFLAGS = @[email protected]
-DISTCHECK_CONFIGURE_FLAGS = @[email protected]
-DLLTOOL = @[email protected]
-DOC_USER_FORMATS = @[email protected]
-DSYMUTIL = @[email protected]
-DUMPBIN = @[email protected]
-EGG_SMCLIENT_CFLAGS = @[email protected]
-EGG_SMCLIENT_LIBS = @[email protected]
-FISH_CFLAGS = @[email protected]
-FISH_LIBS = @[email protected]
-GETTEXT_PACKAGE = @[email protected]
-GIO_QUERYMODULES = @[email protected]
-GLIB_GENMARSHAL = @[email protected]
-GMOFILES = @[email protected]
-GMSGFMT = @[email protected]
-GTKDOC_CHECK = @[email protected]
-GTKDOC_DEPS_CFLAGS = @[email protected]
-GTKDOC_DEPS_LIBS = @[email protected]
-GTKDOC_MKPDF = @[email protected]
-GTKDOC_REBASE = @[email protected]
-HELP_DIR = @[email protected]
-HTML_DIR = @[email protected]
-INSTALL = @[email protected]
-INSTALL_DATA = @[email protected]
-INSTALL_PROGRAM = @[email protected]
-INSTALL_SCRIPT = @[email protected]
-INSTALL_STRIP_PROGRAM = @[email protected]
-INSTOBJEXT = @[email protected]
-INTLLIBS = @[email protected]
-INTLTOOL_EXTRACT = @[email protected]
-INTLTOOL_MERGE = @[email protected]
-INTLTOOL_PERL = @[email protected]
-INTLTOOL_UPDATE = @[email protected]
-INTROSPECTION_CFLAGS = @[email protected]
-INTROSPECTION_COMPILER = @[email protected]
-INTROSPECTION_GENERATE = @[email protected]
-INTROSPECTION_GIRDIR = @[email protected]
-INTROSPECTION_LIBS = @[email protected]
-INTROSPECTION_MAKEFILE = @[email protected]
-INTROSPECTION_SCANNER = @[email protected]
-INTROSPECTION_TYPELIBDIR = @[email protected]
-LDFLAGS = @[email protected]
-LIBMATE_PANEL_APPLET_CFLAGS = @[email protected]
-LIBMATE_PANEL_APPLET_LIBS = @[email protected]
-LIBMATE_PANEL_APPLET_MATECOMPONENT_CFLAGS = @[email protected]
-LIBMATE_PANEL_APPLET_MATECOMPONENT_LIBS = @[email protected]
-LIBOBJS = @[email protected]
-LIBTOOL = @[email protected]
-LIB_MATE_PANEL_APPLET_LT_VERSION = @[email protected]
-LIB_MATE_PANEL_APPLET_MATECOMPONENT_LT_VERSION = @[email protected]
-LTLIBOBJS = @[email protected]
-MAKEINFO = @[email protected]
-MANIFEST_TOOL = @[email protected]
-MATECOMPONENT_ACT_IDLDIR = @[email protected]
-MATECOMPONENT_CFLAGS = @[email protected]
-MATECOMPONENT_IDLDIR = @[email protected]
-MATECOMPONENT_LIBS = @[email protected]
-MATECONFTOOL = @[email protected]
-MATECONF_SCHEMA_CONFIG_SOURCE = @[email protected]
-MATECONF_SCHEMA_FILE_DIR = @[email protected]
-MATECORBA_IDL = @[email protected]
-MKDIR_P = @[email protected]
-MKINSTALLDIRS = @[email protected]
-MSGFMT_OPTS = @[email protected]
-MSGMERGE = @[email protected]
-NETWORK_MANAGER_CFLAGS = @[email protected]
-NETWORK_MANAGER_LIBS = @[email protected]
-NOTIFICATION_AREA_CFLAGS = @[email protected]
-NOTIFICATION_AREA_LIBS = @[email protected]
-OBJDUMP = @[email protected]
-OMF_DIR = @[email protected]
-OTOOL64 = @[email protected]
-PACKAGE = @[email protected]
-PACKAGE_BUGREPORT = @[email protected]
-PACKAGE_NAME = @[email protected]
-PACKAGE_STRING = @[email protected]
-PACKAGE_TARNAME = @[email protected]
-PACKAGE_URL = @[email protected]
-PACKAGE_VERSION = @[email protected]
-PANEL_CFLAGS = @[email protected]
-PANEL_INTLTOOL_MATE_PANEL_APPLET_RULE = @[email protected]
-PANEL_LIBS = @[email protected]
-PANEL_MODULE_MATECOMPONENT_CFLAGS = @[email protected]
-PANEL_MODULE_MATECOMPONENT_LIBS = @[email protected]
-PATH_SEPARATOR = @[email protected]
-PKG_CONFIG = @[email protected]
-PKG_CONFIG_LIBDIR = @[email protected]
-PKG_CONFIG_PATH = @[email protected]
-POFILES = @[email protected]
-PO_IN_DATADIR_FALSE = @[email protected]
-PO_IN_DATADIR_TRUE = @[email protected]
-PYTHON_EXEC_PREFIX = @[email protected]
-PYTHON_PLATFORM = @[email protected]
-PYTHON_PREFIX = @[email protected]
-PYTHON_VERSION = @[email protected]
-REBUILD = @[email protected]
-SET_MAKE = @[email protected]
-TZ_CFLAGS = @[email protected]
-TZ_LIBS = @[email protected]
-USE_NLS = @[email protected]
-VERSION = @[email protected]
-WARN_CFLAGS = @[email protected]
-WNCKLET_CFLAGS = @[email protected]
-WNCKLET_LIBS = @[email protected]
-XGETTEXT = @[email protected]
-XRANDR_CFLAGS = @[email protected]
-XRANDR_LIBS = @[email protected]
-X_CFLAGS = @[email protected]
-X_EXTRA_LIBS = @[email protected]
-X_PRE_LIBS = @[email protected]
-abs_builddir = @[email protected]
-abs_srcdir = @[email protected]
-abs_top_builddir = @[email protected]
-abs_top_srcdir = @[email protected]
-ac_ct_AR = @[email protected]
-ac_ct_CC = @[email protected]
-ac_ct_DUMPBIN = @[email protected]
-am__include = @[email protected]
-am__leading_dot = @[email protected]
-am__quote = @[email protected]
-am__tar = @[email protected]
-am__untar = @[email protected]
-appletsdir = @[email protected]
-build_alias = @[email protected]
-build_cpu = @[email protected]
-build_os = @[email protected]
-build_vendor = @[email protected]
-builddir = @[email protected]
-datadir = @[email protected]
-datarootdir = @[email protected]
-exec_prefix = @[email protected]
-host_alias = @[email protected]
-host_cpu = @[email protected]
-host_os = @[email protected]
-host_vendor = @[email protected]
-htmldir = @[email protected]
-includedir = @[email protected]
-infodir = @[email protected]
-install_sh = @[email protected]
-libexecdir = @[email protected]
-localedir = @[email protected]
-localstatedir = @[email protected]
-mkdir_p = @[email protected]
-modulesdir = @[email protected]
-oldincludedir = @[email protected]
-pkgpyexecdir = @[email protected]
-pkgpythondir = @[email protected]
-program_transform_name = @[email protected]
-pyexecdir = @[email protected]
-pythondir = @[email protected]
-sbindir = @[email protected]
-sharedstatedir = @[email protected]
-sysconfdir = @[email protected]
-target_alias = @[email protected]
-top_build_prefix = @[email protected]
-top_builddir = @[email protected]
-top_srcdir = @[email protected]
-AUTOMAKE_OPTIONS = 1.6
-
-# The name of the module, e.g. 'glib'.
-DOC_MODULE = mate-panel-applet
-
-# The top-level SGML file. Change it if you want.
-DOC_MAIN_SGML_FILE = $(DOC_MODULE)-docs.sgml
-
-# The directory containing the source code. Relative to $(srcdir).
-# gtk-doc will search all .c & .h files beneath here for inline comments
-# documenting functions and macros.
-DOC_SOURCE_DIR = ../../../libmate-panel-applet
-
-# Extra options to supply to gtkdoc-scan.
-SCAN_OPTIONS =
-
-# Extra options to supply to gtkdoc-mkdb.
-MKDB_OPTIONS = --output-format=xml
-
-# Extra options to supply to gtkdoc-fixref.
-FIXXREF_OPTIONS =
-
-# Used for dependencies.
-HFILE_GLOB = $(top_srcdir)/libmate-panel-applet/*.h
-CFILE_GLOB = $(top_srcdir)/libmate-panel-applet/*.c
-
-# Header files to ignore when scanning.
-IGNORE_HFILES = \
- MATE_Panel.h \
- mate-panel-applet-enums.h \
- mate-panel-applet-marshal.h \
- mate-panel-applet-private.h \
- mate-panel-applet-shell.h
-
-
-# Images to copy into HTML directory.
-HTML_IMAGES =
-
-# Extra SGML files that are included by $(DOC_MAIN_SGML_FILE).
-content_files =
-
-# Other files to distribute.
-extra_files =
-
-# CFLAGS and LDFLAGS for compiling scan program. Only needed if your app/lib
-# contains GtkObjects/GObjects and you want to document signals and properties.
-GTKDOC_CFLAGS = \
- $(CFLAGS) \
- $(CPPFLAGS) \
- $(PANEL_CFLAGS) \
- -I$(srcdir)/../../../libmate-panel-applet \
- -I$(top_builddir)/libmate-panel-applet
-
-GTKDOC_LIBS = \
- $(LDFLAGS) \
- $(PANEL_LIBS) \
- ../../../libmate-panel-applet/libmate-panel-applet-3.la
-
[email protected][email protected]_CC = $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
[email protected][email protected]_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
[email protected][email protected]_LD = $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
[email protected][email protected]_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
[email protected][email protected]_RUN = $(LIBTOOL) --mode=execute
-
-# We set GPATH here; this gives us semantics for GNU make
-# which are more like other make's VPATH, when it comes to
-# whether a source that is a target of one rule is then
-# searched for in VPATH/GPATH.
-#
-GPATH = $(srcdir)
-TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE)
-SETUP_FILES = \
- $(content_files) \
- $(DOC_MAIN_SGML_FILE) \
- $(DOC_MODULE)-sections.txt \
- $(DOC_MODULE)-overrides.txt
-
-EXTRA_DIST = \
- $(HTML_IMAGES) \
- $(SETUP_FILES)
-
-DOC_STAMPS = setup-build.stamp scan-build.stamp tmpl-build.stamp sgml-build.stamp \
- html-build.stamp pdf-build.stamp \
- tmpl.stamp sgml.stamp html.stamp pdf.stamp
-
-SCANOBJ_FILES = \
- $(DOC_MODULE).args \
- $(DOC_MODULE).hierarchy \
- $(DOC_MODULE).interfaces \
- $(DOC_MODULE).prerequisites \
- $(DOC_MODULE).signals
-
-REPORT_FILES = \
- $(DOC_MODULE)-undocumented.txt \
- $(DOC_MODULE)-undeclared.txt \
- $(DOC_MODULE)-unused.txt
-
-CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS)
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @[email protected] $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f [email protected]; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/reference/mate-panel-applet/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu doc/reference/mate-panel-applet/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/[email protected] $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/[email protected] $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @[email protected] $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @[email protected] $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" distdir="$(distdir)" \
- dist-hook
-check-am: all-am
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-local
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-data-local
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic \
- maintainer-clean-local
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-local
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am all-local check check-am clean clean-generic \
- clean-libtool clean-local dist-hook distclean \
- distclean-generic distclean-libtool distclean-local distdir \
- dvi dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-data-local install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic \
- maintainer-clean-local mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
- uninstall-local
-
-
[email protected][email protected]: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
-
-docs: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
-
-$(REPORT_FILES): sgml-build.stamp
-
-#### setup ####
-
-setup-build.stamp:
- [email protected] test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
- echo ' DOC Preparing build'; \
- files=`echo $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types`; \
- if test "x$$files" != "x" ; then \
- for file in $$files ; do \
- test -f $(abs_srcdir)/$$file && \
- cp -pu $(abs_srcdir)/$$file $(abs_builddir)/ || true; \
- done; \
- fi; \
- test -d $(abs_srcdir)/tmpl && \
- { cp -rp $(abs_srcdir)/tmpl $(abs_builddir)/; \
- chmod -R u+w $(abs_builddir)/tmpl; } \
- fi
- @touch setup-build.stamp
-
-#### scan ####
-
-scan-build.stamp: $(HFILE_GLOB) $(CFILE_GLOB)
- @echo ' DOC Scanning header files'
- @_source_dir='' ; \
- for i in $(DOC_SOURCE_DIR) ; do \
- _source_dir="$${_source_dir} --source-dir=$$i" ; \
- done ; \
- gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES)
- @if grep -l '^..*$$' $(DOC_MODULE).types > /dev/null 2>&1 ; then \
- echo " DOC Introspecting gobjects"; \
- scanobj_options=""; \
- gtkdoc-scangobj 2>&1 --help | grep >/dev/null "\-\-verbose"; \
- if test "$(?)" = "0"; then \
- if test "x$(V)" = "x1"; then \
- scanobj_options="--verbose"; \
- fi; \
- fi; \
- CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" \
- gtkdoc-scangobj $(SCANGOBJ_OPTIONS) $$scanobj_options --module=$(DOC_MODULE); \
- else \
- for i in $(SCANOBJ_FILES) ; do \
- test -f $$i || touch $$i ; \
- done \
- fi
- @touch scan-build.stamp
-
-$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp
- @true
-
-#### templates ####
-
-tmpl-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt
- @echo ' DOC Rebuilding template files'
- @gtkdoc-mktmpl --module=$(DOC_MODULE) $(MKTMPL_OPTIONS)
- @if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
- if test -w $(abs_srcdir) ; then \
- cp -rp $(abs_builddir)/tmpl $(abs_srcdir)/; \
- fi \
- fi
- @touch tmpl-build.stamp
-
-tmpl.stamp: tmpl-build.stamp
- @true
-
-$(srcdir)/tmpl/*.sgml:
- @true
-
-#### xml ####
-
-sgml-build.stamp: tmpl.stamp $(DOC_MODULE)-sections.txt $(srcdir)/tmpl/*.sgml $(expand_content_files)
- @echo ' DOC Building XML'
- @-chmod -R u+w $(srcdir)
- @_source_dir='' ; \
- for i in $(DOC_SOURCE_DIR) ; do \
- _source_dir="$${_source_dir} --source-dir=$$i" ; \
- done ; \
- gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS)
- @touch sgml-build.stamp
-
-sgml.stamp: sgml-build.stamp
- @true
-
-#### html ####
-
-html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
- @echo ' DOC Building HTML'
- @rm -rf html
- @mkdir html
- @mkhtml_options=""; \
- gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-verbose"; \
- if test "$(?)" = "0"; then \
- if test "x$(V)" = "x1"; then \
- mkhtml_options="$$mkhtml_options --verbose"; \
- fi; \
- fi; \
- gtkdoc-mkhtml 2>&1 --help | grep >/dev/null "\-\-path"; \
- if test "$(?)" = "0"; then \
- mkhtml_options="$$mkhtml_options --path=\"$(abs_srcdir)\""; \
- fi; \
- cd html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
- [email protected] "x$(HTML_IMAGES)" = "x" || \
- for file in $(HTML_IMAGES) ; do \
- if test -f $(abs_srcdir)/$$file ; then \
- cp $(abs_srcdir)/$$file $(abs_builddir)/html; \
- fi; \
- if test -f $(abs_builddir)/$$file ; then \
- cp $(abs_builddir)/$$file $(abs_builddir)/html; \
- fi; \
- done;
- @echo ' DOC Fixing cross-references'
- @gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
- @touch html-build.stamp
-
-#### pdf ####
-
-pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
- @echo ' DOC Building PDF'
- @rm -f $(DOC_MODULE).pdf
- @mkpdf_options=""; \
- gtkdoc-mkpdf 2>&1 --help | grep >/dev/null "\-\-verbose"; \
- if test "$(?)" = "0"; then \
- if test "x$(V)" = "x1"; then \
- mkpdf_options="$$mkpdf_options --verbose"; \
- fi; \
- fi; \
- if test "x$(HTML_IMAGES)" != "x"; then \
- for img in $(HTML_IMAGES); do \
- part=`dirname $$img`; \
- echo $$mkpdf_options | grep >/dev/null "\-\-imgdir=$$part "; \
- if test $$? != 0; then \
- mkpdf_options="$$mkpdf_options --imgdir=$$part"; \
- fi; \
- done; \
- fi; \
- gtkdoc-mkpdf --path="$(abs_srcdir)" $$mkpdf_options $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS)
- @touch pdf-build.stamp
-
-##############
-
-clean-local:
- @rm -f *~ *.bak
- @rm -rf .libs
-
-distclean-local:
- @rm -rf xml html $(REPORT_FILES) $(DOC_MODULE).pdf \
- $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt
- @if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
- rm -f $(SETUP_FILES) $(expand_content_files) $(DOC_MODULE).types; \
- rm -rf tmpl; \
- fi
-
-maintainer-clean-local: clean
- @rm -rf xml html
-
-install-data-local:
- @installfiles=`echo $(builddir)/html/*`; \
- if test "$$installfiles" = '$(builddir)/html/*'; \
- then echo 1>&2 'Nothing to install' ; \
- else \
- if test -n "$(DOC_MODULE_VERSION)"; then \
- installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
- else \
- installdir="$(DESTDIR)$(TARGET_DIR)"; \
- fi; \
- $(mkinstalldirs) $${installdir} ; \
- for i in $$installfiles; do \
- echo ' $(INSTALL_DATA) '$$i ; \
- $(INSTALL_DATA) $$i $${installdir}; \
- done; \
- if test -n "$(DOC_MODULE_VERSION)"; then \
- mv -f $${installdir}/$(DOC_MODULE).devhelp2 \
- $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \
- fi; \
- $(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir}; \
- fi
-
-uninstall-local:
- @if test -n "$(DOC_MODULE_VERSION)"; then \
- installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
- else \
- installdir="$(DESTDIR)$(TARGET_DIR)"; \
- fi; \
- rm -rf $${installdir}
-
-#
-# Require gtk-doc when making dist
-#
[email protected][email protected] @echo "*** gtk-doc must be installed and enabled in order to make dist"
-
-dist-hook: dist-check-gtkdoc dist-hook-local
- @mkdir $(distdir)/tmpl
- @mkdir $(distdir)/html
- @-cp ./tmpl/*.sgml $(distdir)/tmpl
- @cp ./html/* $(distdir)/html
- @-cp ./$(DOC_MODULE).pdf $(distdir)/
- @-cp ./$(DOC_MODULE).types $(distdir)/
- @-cp ./$(DOC_MODULE)-sections.txt $(distdir)/
- @cd $(distdir) && rm -f $(DISTCLEANFILES)
- @$(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html
-
-.PHONY : dist-hook-local docs
-
-dist-hook-local:
-# mkdir $(distdir)/TEXT; \
-# for f in $(srcdir)/TEXT/* ; do \
-# test -f $$f && cp -p $$f $(distdir)/TEXT; \
-# done
-
--include $(top_srcdir)/git.mk
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: