remove autogenerated files

1 files changed, 0 insertions, 626 deletions

diff --git a/data/icons/scalable/Makefile.in b/data/icons/scalable/Makefile.in
deleted file mode 100644
index 17a6eb7..0000000
--- a/data/icons/scalable/Makefile.in
+++ /dev/null
@@ -1,626 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = data/icons/scalable
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/mate-doc-utils.m4 \
-	$(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/libtool.m4 \
-	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
-	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
-	$(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo "  GEN   " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	distdir
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-ALL_LINGUAS = @ALL_LINGUAS@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BINDIR = @BINDIR@
-CANBERRA_CFLAGS = @CANBERRA_CFLAGS@
-CANBERRA_LIBS = @CANBERRA_LIBS@
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIR = @DATADIR@
-DATADIRNAME = @DATADIRNAME@
-DBUS_CFLAGS = @DBUS_CFLAGS@
-DBUS_LIBS = @DBUS_LIBS@
-DBUS_SERVICES_DIR = @DBUS_SERVICES_DIR@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@
-DOCBOOK2MAN = @DOCBOOK2MAN@
-DOCDIR = @DOCDIR@
-DOC_USER_FORMATS = @DOC_USER_FORMATS@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-GDK_CFLAGS = @GDK_CFLAGS@
-GDK_LIBS = @GDK_LIBS@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
-GLIB_LIBS = @GLIB_LIBS@
-GMOFILES = @GMOFILES@
-GMSGFMT = @GMSGFMT@
-GPM_EXTRA_LIBS = @GPM_EXTRA_LIBS@
-GREP = @GREP@
-HELP_DIR = @HELP_DIR@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLLIBS = @INTLLIBS@
-INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
-INTLTOOL_MERGE = @INTLTOOL_MERGE@
-INTLTOOL_PERL = @INTLTOOL_PERL@
-INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LIBMATENOTIFY_CFLAGS = @LIBMATENOTIFY_CFLAGS@
-LIBMATENOTIFY_LIBS = @LIBMATENOTIFY_LIBS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MATECONFTOOL = @MATECONFTOOL@
-MATECONF_SCHEMA_CONFIG_SOURCE = @MATECONF_SCHEMA_CONFIG_SOURCE@
-MATECONF_SCHEMA_FILE_DIR = @MATECONF_SCHEMA_FILE_DIR@
-MATE_CFLAGS = @MATE_CFLAGS@
-MATE_LIBS = @MATE_LIBS@
-MKDIR_P = @MKDIR_P@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGFMT_OPTS = @MSGFMT_OPTS@
-MSGMERGE = @MSGMERGE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OMF_DIR = @OMF_DIR@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PANEL_CFLAGS = @PANEL_CFLAGS@
-PANEL_LIBS = @PANEL_LIBS@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POFILES = @POFILES@
-POSUB = @POSUB@
-PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
-PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
-RANLIB = @RANLIB@
-SBINDIR = @SBINDIR@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-SYSCONFDIR = @SYSCONFDIR@
-UNIQUE_CFLAGS = @UNIQUE_CFLAGS@
-UNIQUE_LIBS = @UNIQUE_LIBS@
-UPOWER_CFLAGS = @UPOWER_CFLAGS@
-UPOWER_LIBS = @UPOWER_LIBS@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-WARNINGFLAGS = @WARNINGFLAGS@
-WARN_CFLAGS = @WARN_CFLAGS@
-X11_CFLAGS = @X11_CFLAGS@
-X11_LIBS = @X11_LIBS@
-XGETTEXT = @XGETTEXT@
-XMLTO = @XMLTO@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-SUBDIRS = actions apps status
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign data/icons/scalable/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign data/icons/scalable/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(MKDIR_P) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
-	install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am check check-am clean clean-generic clean-libtool \
-	ctags ctags-recursive distclean distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
-	uninstall uninstall-am
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: