diff options
Diffstat (limited to 'help')
109 files changed, 1284 insertions, 1152 deletions
diff --git a/help/af/af.po b/help/af/af.po index 3f44f56..6d933ca 100644 --- a/help/af/af.po +++ b/help/af/af.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Afrikaans (https://www.transifex.com/mate/teams/13566/af/)\n" @@ -597,9 +597,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -922,10 +923,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/am/am.po b/help/am/am.po index 602a1cb..b8fde96 100644 --- a/help/am/am.po +++ b/help/am/am.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: samson <[email protected]>, 2018\n" "Language-Team: Amharic (https://www.transifex.com/mate/teams/13566/am/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ar/ar.po b/help/ar/ar.po index fa72521..2b0f039 100644 --- a/help/ar/ar.po +++ b/help/ar/ar.po @@ -4,13 +4,14 @@ # Mosaab Alzoubi <[email protected]>, 2018 # Wolfgang Ulbrich <[email protected]>, 2018 # مهدي السطيفي <[email protected]>, 2018 +# Ahmd go <[email protected]>, 2021 # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" -"Last-Translator: مهدي السطيفي <[email protected]>, 2018\n" +"Last-Translator: Ahmd go <[email protected]>, 2021\n" "Language-Team: Arabic (https://www.transifex.com/mate/teams/13566/ar/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -52,7 +53,7 @@ msgstr "" #. (itstool) path: publisher/publishername #: C/index.docbook:52 msgid "MATE Documentation Team" -msgstr "" +msgstr "فريق متّة التوثيقي " #. (itstool) path: publisher/publishername #. (itstool) path: revdescription/para @@ -599,9 +600,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -924,10 +926,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/as/as.po b/help/as/as.po index 33dbce7..b053056 100644 --- a/help/as/as.po +++ b/help/as/as.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Assamese (https://www.transifex.com/mate/teams/13566/as/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ast/ast.po b/help/ast/ast.po index 61deb49..bd03372 100644 --- a/help/ast/ast.po +++ b/help/ast/ast.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Ḷḷumex03, 2018\n" "Language-Team: Asturian (https://www.transifex.com/mate/teams/13566/ast/)\n" @@ -595,9 +595,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -920,10 +921,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/az/az.po b/help/az/az.po index 7d67be0..8eefedc 100644 --- a/help/az/az.po +++ b/help/az/az.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Azerbaijani (https://www.transifex.com/mate/teams/13566/az/)\n" @@ -598,9 +598,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -923,10 +924,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/be/be.po b/help/be/be.po index 19d2cc6..d2aabdb 100644 --- a/help/be/be.po +++ b/help/be/be.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Mihail Varantsou <[email protected]>, 2018\n" "Language-Team: Belarusian (https://www.transifex.com/mate/teams/13566/be/)\n" @@ -597,9 +597,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -922,10 +923,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/bg/bg.po b/help/bg/bg.po index 9116d19..d447be8 100644 --- a/help/bg/bg.po +++ b/help/bg/bg.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: H Bozhkov, 2020\n" "Language-Team: Bulgarian (https://www.transifex.com/mate/teams/13566/bg/)\n" @@ -606,9 +606,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -931,10 +932,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/bn/bn.po b/help/bn/bn.po index c81171b..19f7e66 100644 --- a/help/bn/bn.po +++ b/help/bn/bn.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Bengali (https://www.transifex.com/mate/teams/13566/bn/)\n" @@ -599,9 +599,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -924,10 +925,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/bn_IN/bn_IN.po b/help/bn_IN/bn_IN.po index 05b19c0..fa5e2a0 100644 --- a/help/bn_IN/bn_IN.po +++ b/help/bn_IN/bn_IN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: umesh agarwal <[email protected]>, 2018\n" "Language-Team: Bengali (India) (https://www.transifex.com/mate/teams/13566/bn_IN/)\n" @@ -598,9 +598,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -923,10 +924,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/br/br.po b/help/br/br.po index 11ee2e4..520e9d4 100644 --- a/help/br/br.po +++ b/help/br/br.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Alan Monfort <[email protected]>, 2018\n" "Language-Team: Breton (https://www.transifex.com/mate/teams/13566/br/)\n" @@ -595,9 +595,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -920,10 +921,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/bs/bs.po b/help/bs/bs.po index 123d8c1..fc863f5 100644 --- a/help/bs/bs.po +++ b/help/bs/bs.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Sky Lion <[email protected]>, 2018\n" "Language-Team: Bosnian (https://www.transifex.com/mate/teams/13566/bs/)\n" @@ -595,9 +595,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -920,10 +921,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ca/ca.po b/help/ca/ca.po index bce6bac..c10c99c 100644 --- a/help/ca/ca.po +++ b/help/ca/ca.po @@ -627,9 +627,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -958,10 +959,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ca@valencia/[email protected] b/help/ca@valencia/[email protected] index a41e692..c3a8194 100644 --- a/help/ca@valencia/[email protected] +++ b/help/ca@valencia/[email protected] @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Empar Montoro <[email protected]>, 2018\n" "Language-Team: Catalan (Valencian) (https://www.transifex.com/mate/teams/13566/ca@valencia/)\n" @@ -603,9 +603,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -928,10 +929,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/cmn/cmn.po b/help/cmn/cmn.po index 35afc19..f09447c 100644 --- a/help/cmn/cmn.po +++ b/help/cmn/cmn.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: 趙惟倫 <[email protected]>, 2018\n" "Language-Team: Chinese (Mandarin) (https://www.transifex.com/mate/teams/13566/cmn/)\n" @@ -597,9 +597,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -922,10 +923,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/crh/crh.po b/help/crh/crh.po index d4fc81d..eaf38cc 100644 --- a/help/crh/crh.po +++ b/help/crh/crh.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Crimean Turkish (https://www.transifex.com/mate/teams/13566/crh/)\n" @@ -596,9 +596,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -921,10 +922,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/cs/cs.po b/help/cs/cs.po index 6670b89..145c968 100644 --- a/help/cs/cs.po +++ b/help/cs/cs.po @@ -3,14 +3,14 @@ # Stefano Karapetsas <[email protected]>, 2018 # ToMáš Marný, 2018 # Wolfgang Ulbrich <[email protected]>, 2018 -# LiberteCzech <[email protected]>, 2018 +# LiberteCzech <[email protected]>, 2018 # Pavel Borecki <[email protected]>, 2020 # Lukáš Lommer <[email protected]>, 2021 # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Lukáš Lommer <[email protected]>, 2021\n" "Language-Team: Czech (https://www.transifex.com/mate/teams/13566/cs/)\n" @@ -610,9 +610,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -935,10 +936,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/cy/cy.po b/help/cy/cy.po index 67b69ab..d19a6cf 100644 --- a/help/cy/cy.po +++ b/help/cy/cy.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: ciaran, 2018\n" "Language-Team: Welsh (https://www.transifex.com/mate/teams/13566/cy/)\n" @@ -597,9 +597,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -922,10 +923,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/da/da.po b/help/da/da.po index 3fe0c77..a31565f 100644 --- a/help/da/da.po +++ b/help/da/da.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Joe Hansen <[email protected]>, 2021\n" "Language-Team: Danish (https://www.transifex.com/mate/teams/13566/da/)\n" @@ -20,10 +20,10 @@ msgstr "" msgctxt "_" msgid "translator-credits" msgstr "" -"\"Joe Hansen, 2012, 2013, 2014, 2015, 2016, 2017, 2018.\\n\"\n" -"\"\\n\"\n" -"\"Dansk-gruppen <[email protected]>\\n\"\n" -"\"Mere info: http://www.dansk-gruppen.dk\"" +"Joe Hansen 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021.\n" +"\n" +"Dansk-gruppen <[email protected]>\n" +"Mere info: http://www.dansk-gruppen.dk" #. (itstool) path: articleinfo/title #: C/index.docbook:23 @@ -255,8 +255,8 @@ msgid "" "You can disable this notification by changing the dconf key " "<command>org.mate.power-manager notify-fully-charged</command>." msgstr "" -"Du kan ændre denne påmindelse ved at ændre dconf-nøglen <command>org.mate" -".power-manager notify-fully-charged</command>." +"Du kan ændre denne påmindelse ved at ændre dconf-nøglen " +"<command>org.mate.power-manager notify-fully-charged</command>." #. (itstool) path: note/para #: C/index.docbook:206 @@ -666,9 +666,10 @@ msgstr "" "brugerindtastning, og hvis musen ikke har bevæget sig eller tastaturet er " "anvendt startes et tidsudløb. Når værdien af dette tidsudløb når værdien " "angivet i <command>mate-screensaver-preferences</command>, så markeres det " -"aktuelle logind som »session ledig«. På dette tidspunkt udfører <application" -">MATE-strømhåndtering</application> alle sessionens handlinger såsom " -"aktivering af lav strøm-tilstand og sænkning af den bærbares panellysstyrke." +"aktuelle logind som »session ledig«. På dette tidspunkt udfører " +"<application>MATE-strømhåndtering</application> alle sessionens handlinger " +"såsom aktivering af lav strøm-tilstand og sænkning af den bærbares " +"panellysstyrke." #. (itstool) path: figure/title #: C/index.docbook:461 @@ -712,16 +713,17 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" "For at gøre det tydligere, skyderne i <command>mate-power-" "preferences</command> er angivet til at starte ved værdien for session-" "timeout + 1 minut, da vi logisk ikke kan udløse før sessionen er markeret " -"som ledig. Hvis du justerer værdien for sessions-idle-tidsudløbet i <command" -">mate-screensaver-preferences</command> så vil starten af skyderne i " -"<command>mate-power-preferences</command> ændre sig tilsvarende." +"som ledig. Hvis du justerer værdien for sessions-idle-tidsudløbet i " +"<command>mate-screensaver-preferences</command> så vil starten af skyderne i" +" <command>mate-power-preferences</command> ændre sig tilsvarende." #. (itstool) path: section/title #: C/index.docbook:491 @@ -1124,10 +1126,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" "Og kontroller for processen <command>hald-addon-acpi</command>. Hvis den " "ikke afvikles, så sikr dig at HAL afvikles med tilvalget <command>--retain-" diff --git a/help/de/de.po b/help/de/de.po index 791ecb8..8488615 100644 --- a/help/de/de.po +++ b/help/de/de.po @@ -10,7 +10,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Ettore Atalan <[email protected]>, 2019\n" "Language-Team: German (https://www.transifex.com/mate/teams/13566/de/)\n" @@ -607,9 +607,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -932,10 +933,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/dz/dz.po b/help/dz/dz.po index 4153883..75bb9f4 100644 --- a/help/dz/dz.po +++ b/help/dz/dz.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Dzongkha (https://www.transifex.com/mate/teams/13566/dz/)\n" @@ -597,9 +597,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -922,10 +923,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/el/el.po b/help/el/el.po index 0a96867..ecfe504 100644 --- a/help/el/el.po +++ b/help/el/el.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: TheDimitris15, 2019\n" "Language-Team: Greek (https://www.transifex.com/mate/teams/13566/el/)\n" @@ -602,9 +602,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -927,10 +928,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/en_AU/en_AU.po b/help/en_AU/en_AU.po index 53d7778..524bca7 100644 --- a/help/en_AU/en_AU.po +++ b/help/en_AU/en_AU.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Michael Findlay <[email protected]>, 2018\n" "Language-Team: English (Australia) (https://www.transifex.com/mate/teams/13566/en_AU/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/en_CA/en_CA.po b/help/en_CA/en_CA.po index 4c6da12..cb8dc8b 100644 --- a/help/en_CA/en_CA.po +++ b/help/en_CA/en_CA.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: English (Canada) (https://www.transifex.com/mate/teams/13566/en_CA/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/en_GB/en_GB.po b/help/en_GB/en_GB.po index 878a028..b1894bb 100644 --- a/help/en_GB/en_GB.po +++ b/help/en_GB/en_GB.po @@ -596,9 +596,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -921,10 +922,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/eo/eo.po b/help/eo/eo.po index cfeda32..233c3d4 100644 --- a/help/eo/eo.po +++ b/help/eo/eo.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Cora Loftis, 2018\n" "Language-Team: Esperanto (https://www.transifex.com/mate/teams/13566/eo/)\n" @@ -605,9 +605,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -930,10 +931,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/es/es.po b/help/es/es.po index a7c8468..4344f6a 100644 --- a/help/es/es.po +++ b/help/es/es.po @@ -10,7 +10,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Toni Estévez <[email protected]>, 2021\n" "Language-Team: Spanish (https://www.transifex.com/mate/teams/13566/es/)\n" @@ -18,7 +18,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: es\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" +"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n" #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2 msgctxt "_" @@ -618,8 +618,8 @@ msgstr "" "Tan pronto como la sesión está marcada como inactiva, el <application>Gestor" " de energía de MATE</application> inicia su propio temporizador del sistema." " Cuando se alcanza el tiempo de espera configurado en <command>mate-power-" -"preferences</command> y la carga de la CPU está inactiva, se ejecuta la " -"acción de reposo, que normalmente consiste en apagar la pantalla o en " +"preferences</command> y la carga del procesador está inactiva, se ejecuta la" +" acción de reposo, que normalmente consiste en apagar la pantalla o en " "suspender o hibernar el sistema." #. (itstool) path: section/para @@ -628,9 +628,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -959,10 +960,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink @@ -1009,9 +1010,9 @@ msgid "" "aware of those trademarks, then the names are in capital letters or initial " "capital letters." msgstr "" -"Muchos de los nombres utilizados por las empresas para distinguir sus " -"productos y servicios se consideran marcas comerciales. Cuando esos nombres " -"aparecen en cualquier documentación de MATE y los miembros del proyecto de " +"Muchos de los nombres usados por las empresas para distinguir sus productos " +"y servicios se consideran marcas comerciales. Cuando esos nombres aparecen " +"en cualquier documentación de MATE y los miembros del proyecto de " "documentación de MATE son conscientes de que se trata de marcas registradas," " dichos nombres se escriben en letras mayúsculas o con inical mayúscula." diff --git a/help/es_AR/es_AR.po b/help/es_AR/es_AR.po index 7ae620e..ff8603b 100644 --- a/help/es_AR/es_AR.po +++ b/help/es_AR/es_AR.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Reshi Starkey <[email protected]>, 2018\n" "Language-Team: Spanish (Argentina) (https://www.transifex.com/mate/teams/13566/es_AR/)\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: es_AR\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" +"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n" #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2 msgctxt "_" @@ -597,9 +597,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -922,10 +923,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/es_CL/es_CL.po b/help/es_CL/es_CL.po index ecc507c..87a11bd 100644 --- a/help/es_CL/es_CL.po +++ b/help/es_CL/es_CL.po @@ -1,14 +1,14 @@ # # Translators: # Stefano Karapetsas <[email protected]>, 2018 -# prflr88 <[email protected]>, 2018 +# Pablo Lezaeta Reyes <[email protected]>, 2018 # Alejo_K <[email protected]>, 2018 # Robert Petitpas <[email protected]>, 2018 # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Robert Petitpas <[email protected]>, 2018\n" "Language-Team: Spanish (Chile) (https://www.transifex.com/mate/teams/13566/es_CL/)\n" @@ -16,7 +16,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: es_CL\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" +"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n" #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2 msgctxt "_" @@ -597,9 +597,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -922,10 +923,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/es_CO/es_CO.po b/help/es_CO/es_CO.po index 5fb97e4..1f9a00f 100644 --- a/help/es_CO/es_CO.po +++ b/help/es_CO/es_CO.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Julian Borrero <[email protected]>, 2018\n" "Language-Team: Spanish (Colombia) (https://www.transifex.com/mate/teams/13566/es_CO/)\n" @@ -15,7 +15,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: es_CO\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" +"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n" #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2 msgctxt "_" @@ -596,9 +596,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -921,10 +922,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/es_ES/es_ES.po b/help/es_ES/es_ES.po index b49544b..e0dbbfe 100644 --- a/help/es_ES/es_ES.po +++ b/help/es_ES/es_ES.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Jose11091 <[email protected]>, 2018\n" "Language-Team: Spanish (Spain) (https://www.transifex.com/mate/teams/13566/es_ES/)\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: es_ES\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" +"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n" #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2 msgctxt "_" @@ -597,9 +597,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -922,10 +923,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/es_MX/es_MX.po b/help/es_MX/es_MX.po index 59ed05e..b4b6964 100644 --- a/help/es_MX/es_MX.po +++ b/help/es_MX/es_MX.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Luis Armando Medina <[email protected]>, 2018\n" "Language-Team: Spanish (Mexico) (https://www.transifex.com/mate/teams/13566/es_MX/)\n" @@ -15,7 +15,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: es_MX\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" +"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n" #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2 msgctxt "_" @@ -603,9 +603,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -928,10 +929,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/es_PR/es_PR.po b/help/es_PR/es_PR.po index abb68f5..bc8e5c2 100644 --- a/help/es_PR/es_PR.po +++ b/help/es_PR/es_PR.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Neverest <[email protected]>, 2018\n" "Language-Team: Spanish (Puerto Rico) (https://www.transifex.com/mate/teams/13566/es_PR/)\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: es_PR\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" +"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n" #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2 msgctxt "_" @@ -597,9 +597,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -922,10 +923,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/et/et.po b/help/et/et.po index 8381564..d97c648 100644 --- a/help/et/et.po +++ b/help/et/et.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Mattias Põldaru <[email protected]>, 2019\n" "Language-Team: Estonian (https://www.transifex.com/mate/teams/13566/et/)\n" @@ -601,9 +601,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -926,10 +927,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/eu/eu.po b/help/eu/eu.po index 739fd30..22cf049 100644 --- a/help/eu/eu.po +++ b/help/eu/eu.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Alexander Gabilondo <[email protected]>, 2020\n" "Language-Team: Basque (https://www.transifex.com/mate/teams/13566/eu/)\n" @@ -599,9 +599,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -924,10 +925,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/fa/fa.po b/help/fa/fa.po index 2d1989d..3bf029b 100644 --- a/help/fa/fa.po +++ b/help/fa/fa.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Mahdi Pourghasem <[email protected]>, 2018\n" "Language-Team: Persian (https://www.transifex.com/mate/teams/13566/fa/)\n" @@ -596,9 +596,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -921,10 +922,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/fi/fi.po b/help/fi/fi.po index 7645758..2e96d02 100644 --- a/help/fi/fi.po +++ b/help/fi/fi.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Kimmo Kujansuu <[email protected]>, 2019\n" "Language-Team: Finnish (https://www.transifex.com/mate/teams/13566/fi/)\n" @@ -603,9 +603,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -928,10 +929,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/fr/fr.po b/help/fr/fr.po index 220c0c7..f964f6e 100644 --- a/help/fr/fr.po +++ b/help/fr/fr.po @@ -11,7 +11,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Tubuntu, 2020\n" "Language-Team: French (https://www.transifex.com/mate/teams/13566/fr/)\n" @@ -19,7 +19,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: fr\n" -"Plural-Forms: nplurals=2; plural=(n > 1);\n" +"Plural-Forms: nplurals=3; plural=(n == 0 || n == 1) ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n" #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2 msgctxt "_" @@ -614,9 +614,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -939,10 +940,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/fur/fur.po b/help/fur/fur.po index dcd326b..3740258 100644 --- a/help/fur/fur.po +++ b/help/fur/fur.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Friulian (https://www.transifex.com/mate/teams/13566/fur/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/fy/fy.po b/help/fy/fy.po index e0d4f6b..1cc2afd 100644 --- a/help/fy/fy.po +++ b/help/fy/fy.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Western Frisian (https://www.transifex.com/mate/teams/13566/fy/)\n" @@ -597,9 +597,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -922,10 +923,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ga/ga.po b/help/ga/ga.po index afc8804..225ae4c 100644 --- a/help/ga/ga.po +++ b/help/ga/ga.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Irish (https://www.transifex.com/mate/teams/13566/ga/)\n" @@ -597,9 +597,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -922,10 +923,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/gl/gl.po b/help/gl/gl.po index 8ea6bea..5567f15 100644 --- a/help/gl/gl.po +++ b/help/gl/gl.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Miguel Anxo Bouzada <[email protected]>, 2019\n" "Language-Team: Galician (https://www.transifex.com/mate/teams/13566/gl/)\n" @@ -617,9 +617,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -948,10 +949,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/gu/gu.po b/help/gu/gu.po index 8c99636..95a8d90 100644 --- a/help/gu/gu.po +++ b/help/gu/gu.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Milan Savaliya <[email protected]>, 2018\n" "Language-Team: Gujarati (https://www.transifex.com/mate/teams/13566/gu/)\n" @@ -595,9 +595,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -920,10 +921,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ha/ha.po b/help/ha/ha.po index e09ae46..40fbc28 100644 --- a/help/ha/ha.po +++ b/help/ha/ha.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Hausa (https://www.transifex.com/mate/teams/13566/ha/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/he/he.po b/help/he/he.po index 37c8cbe..9127078 100644 --- a/help/he/he.po +++ b/help/he/he.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Omer I.S. <[email protected]>, 2020\n" "Language-Team: Hebrew (https://www.transifex.com/mate/teams/13566/he/)\n" @@ -598,9 +598,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -923,10 +924,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/hi/hi.po b/help/hi/hi.po index a4e2726..b7e5c63 100644 --- a/help/hi/hi.po +++ b/help/hi/hi.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Sadgamaya <[email protected]>, 2018\n" "Language-Team: Hindi (https://www.transifex.com/mate/teams/13566/hi/)\n" @@ -599,9 +599,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -924,10 +925,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/hr/hr.po b/help/hr/hr.po index a110409..e2ef7d2 100644 --- a/help/hr/hr.po +++ b/help/hr/hr.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Radovan Gundulić <[email protected]>, 2020\n" "Language-Team: Croatian (https://www.transifex.com/mate/teams/13566/hr/)\n" @@ -619,9 +619,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -944,10 +945,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/hu/hu.po b/help/hu/hu.po index ccb7f35..a5df596 100644 --- a/help/hu/hu.po +++ b/help/hu/hu.po @@ -11,7 +11,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Robert Antoni Buj i Gelonch <[email protected]>, 2019\n" "Language-Team: Hungarian (https://www.transifex.com/mate/teams/13566/hu/)\n" @@ -608,9 +608,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -933,10 +934,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/hy/hy.po b/help/hy/hy.po index bb9eddb..1df543a 100644 --- a/help/hy/hy.po +++ b/help/hy/hy.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Avag Sayan <[email protected]>, 2020\n" "Language-Team: Armenian (https://www.transifex.com/mate/teams/13566/hy/)\n" @@ -596,9 +596,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -921,10 +922,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ia/ia.po b/help/ia/ia.po index 49f2ec3..7378a4d 100644 --- a/help/ia/ia.po +++ b/help/ia/ia.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: SoftInterlingua <>, 2020\n" "Language-Team: Interlingua (https://www.transifex.com/mate/teams/13566/ia/)\n" @@ -595,9 +595,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -920,10 +921,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/id/id.po b/help/id/id.po index 112e262..3cbe618 100644 --- a/help/id/id.po +++ b/help/id/id.po @@ -3,16 +3,15 @@ # Stefano Karapetsas <[email protected]>, 2018 # Willy Sudiarto Raharjo <[email protected]>, 2018 # Wolfgang Ulbrich <[email protected]>, 2018 -# Kukuh Syafaat <[email protected]>, 2018 # Chotibul Studio <[email protected]>, 2020 -# Andika Triwidada <[email protected]>, 2021 +# Andika Triwidada <[email protected]>, 2022 # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" -"Last-Translator: Andika Triwidada <[email protected]>, 2021\n" +"Last-Translator: Andika Triwidada <[email protected]>, 2022\n" "Language-Team: Indonesian (https://www.transifex.com/mate/teams/13566/id/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -28,12 +27,13 @@ msgstr "" "Ahmad Riza H Nst <[email protected]>\n" "Dirgita <[email protected]>\n" "Tim MATE Indonesia <http://id.mate.org>\n" -"Kukuh Syafaat <[email protected]>, 2017." +"Kukuh Syafaat <[email protected]>, 2017.\n" +"Andika Triwidada <[email protected]>, 2022." #. (itstool) path: articleinfo/title #: C/index.docbook:23 msgid "<application>MATE Power Manager</application> Manual" -msgstr "" +msgstr "Manual <application>Manajer Daya MATE</application>" #. (itstool) path: abstract/para #: C/index.docbook:25 @@ -53,6 +53,7 @@ msgstr "<year>2015-2021</year> <holder>Tim Dokumentasi MATE</holder>" msgid "" "<year>2006-2009</year> <holder>Richard Hughes ([email protected])</holder>" msgstr "" +"<year>2006-2009</year> <holder>Richard Hughes ([email protected])</holder>" #. (itstool) path: publisher/publishername #: C/index.docbook:52 @@ -63,13 +64,13 @@ msgstr "Tim Dokumentasi MATE" #. (itstool) path: revdescription/para #: C/index.docbook:55 C/index.docbook:98 msgid "Richard Hughes" -msgstr "" +msgstr "Richard Hughes" #. (itstool) path: authorgroup/author #: C/index.docbook:61 msgid "" "<surname>MATE Documentation Team</surname> <affiliation> </affiliation>" -msgstr "" +msgstr "<surname>Tim Dokumentasi MATE</surname> <affiliation> </affiliation>" #. (itstool) path: authorgroup/author #: C/index.docbook:71 @@ -77,17 +78,20 @@ msgid "" "<firstname>Richard</firstname> <surname>Hughes</surname> " "<email>[email protected]</email>" msgstr "" +"<firstname>Richard</firstname> <surname>Hughes</surname> " +"<email>[email protected]</email>" #. (itstool) path: revdescription/para #: C/index.docbook:95 msgid "Richard Hughes <email>[email protected]</email>" -msgstr "" +msgstr "Richard Hughes <email>[email protected]</email>" #. (itstool) path: revhistory/revision #: C/index.docbook:91 msgid "" "<revnumber>2.0</revnumber> <date>2006-08-30</date> <_:revdescription-1/>" msgstr "" +"<revnumber>2.0</revnumber> <date>2006-08-30</date> <_:revdescription-1/>" #. (itstool) path: legalnotice/title #: C/index.docbook:104 @@ -112,7 +116,7 @@ msgstr "" #. (itstool) path: article/indexterm #: C/index.docbook:118 msgid "<primary>mate-power-manager</primary>" -msgstr "" +msgstr "<primary>mate-power-manager</primary>" #. (itstool) path: section/title #: C/index.docbook:125 @@ -220,7 +224,7 @@ msgctxt "_" msgid "" "external ref='figures/gpm-charged.png' " "md5='cc83716555d07b13a3659683f96c531c'" -msgstr "" +msgstr "." #. (itstool) path: note/para #: C/index.docbook:200 @@ -264,7 +268,7 @@ msgstr "" msgctxt "_" msgid "" "external ref='figures/gpm-low.png' md5='6cd86acf26f251d78060dd2ecb6b6506'" -msgstr "" +msgstr "." #. (itstool) path: note/para #: C/index.docbook:232 @@ -302,7 +306,7 @@ msgctxt "_" msgid "" "external ref='figures/gpm-critical.png' " "md5='77b0848ed3bd0510b65f89e0d07a2fed'" -msgstr "" +msgstr "." #. (itstool) path: section/title #: C/index.docbook:259 @@ -332,7 +336,7 @@ msgctxt "_" msgid "" "external ref='figures/gpm-suspend-problem.png' " "md5='4e4c1fafda61c5ace02f957717ea7ce6'" -msgstr "" +msgstr "." #. (itstool) path: note/para #: C/index.docbook:276 @@ -377,7 +381,7 @@ msgctxt "_" msgid "" "external ref='figures/gpm-stats-graph.png' " "md5='c7cfa37ad6e96041a1c312d85236e7f6'" -msgstr "" +msgstr "." #. (itstool) path: note/para #: C/index.docbook:308 @@ -500,7 +504,7 @@ msgctxt "_" msgid "" "external ref='figures/gpm-prefs-ac.png' " "md5='dc4409a63218146e52d3e670b26785bd'" -msgstr "" +msgstr "." #. (itstool) path: section/title #: C/index.docbook:416 @@ -522,7 +526,7 @@ msgctxt "_" msgid "" "external ref='figures/gpm-prefs-battery.png' " "md5='89fe431e4f38073f7d58f38425ad1ee7'" -msgstr "" +msgstr "." #. (itstool) path: section/para #: C/index.docbook:427 @@ -551,7 +555,7 @@ msgctxt "_" msgid "" "external ref='figures/gpm-prefs-general.png' " "md5='52b7d145bd085d8af6f3194ac632c547'" -msgstr "" +msgstr "." #. (itstool) path: section/title #: C/index.docbook:448 @@ -586,7 +590,7 @@ msgstr "" msgctxt "_" msgid "" "external ref='figures/gs-prefs.png' md5='e9ce36b6ef557681ca4e8e90b71a7f46'" -msgstr "" +msgstr "." #. (itstool) path: section/para #: C/index.docbook:472 @@ -604,9 +608,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -651,7 +656,7 @@ msgstr "" #. (itstool) path: listitem/para #: C/index.docbook:519 msgid "<command>org.mate.power-manager lock-use-screensaver</command>" -msgstr "" +msgstr "<command>org.mate.power-manager lock-use-screensaver</command>" #. (itstool) path: section/para #: C/index.docbook:524 @@ -663,17 +668,17 @@ msgstr "" #. (itstool) path: listitem/para #: C/index.docbook:531 msgid "<command>org.mate.power-manager lock-blank-screen</command>" -msgstr "" +msgstr "<command>org.mate.power-manager lock-blank-screen</command>" #. (itstool) path: listitem/para #: C/index.docbook:536 msgid "<command>org.mate.power-manager lock-suspend</command>" -msgstr "" +msgstr "<command>org.mate.power-manager lock-suspend</command>" #. (itstool) path: listitem/para #: C/index.docbook:541 msgid "<command>org.mate.power-manager lock-hibernate</command>" -msgstr "" +msgstr "<command>org.mate.power-manager lock-hibernate</command>" #. (itstool) path: note/para #: C/index.docbook:548 @@ -716,7 +721,7 @@ msgctxt "_" msgid "" "external ref='figures/applet-brightness.png' " "md5='8ce34f6733215fb86009471f19850dcc'" -msgstr "" +msgstr "." #. (itstool) path: note/para #: C/index.docbook:580 @@ -752,7 +757,7 @@ msgctxt "_" msgid "" "external ref='figures/applet-inhibit.png' " "md5='7381a44dae4f17bfd47abaa54c0ca2a4'" -msgstr "" +msgstr "." #. (itstool) path: note/para #: C/index.docbook:608 @@ -801,7 +806,7 @@ msgctxt "_" msgid "" "external ref='figures/gpm-cell-capacity.png' " "md5='7635c3b846f39faf7b16a921a6ebb55c'" -msgstr "" +msgstr "." #. (itstool) path: section/title #: C/index.docbook:644 @@ -929,10 +934,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink @@ -1052,7 +1057,7 @@ msgstr "" #. (itstool) path: formalpara/title #: C/legal.xml:77 msgid "Software Licence" -msgstr "" +msgstr "Lisensi Perangkat Lunak" #. (itstool) path: formalpara/para #: C/legal.xml:78 diff --git a/help/ie/ie.po b/help/ie/ie.po index be8cfb7..281e70e 100644 --- a/help/ie/ie.po +++ b/help/ie/ie.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Caarmi, 2019\n" "Language-Team: Interlingue (https://www.transifex.com/mate/teams/13566/ie/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ig/ig.po b/help/ig/ig.po index fe7ab7b..9a40774 100644 --- a/help/ig/ig.po +++ b/help/ig/ig.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Igbo (https://www.transifex.com/mate/teams/13566/ig/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/is/is.po b/help/is/is.po index c8ddd96..10d91bc 100644 --- a/help/is/is.po +++ b/help/is/is.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Icelandic (https://www.transifex.com/mate/teams/13566/is/)\n" @@ -598,9 +598,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -923,10 +924,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/it/it.po b/help/it/it.po index c207a7a..cce387b 100644 --- a/help/it/it.po +++ b/help/it/it.po @@ -5,33 +5,32 @@ # Marco Z. <[email protected]>, 2018 # Giuseppe Pignataro <[email protected]>, 2019 # Enrico B. <[email protected]>, 2019 -# Alessandro Volturno <[email protected]>, 2021 +# Alessandro Volturno <[email protected]>, 2022 # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" -"Last-Translator: Alessandro Volturno <[email protected]>, 2021\n" +"Last-Translator: Alessandro Volturno <[email protected]>, 2022\n" "Language-Team: Italian (https://www.transifex.com/mate/teams/13566/it/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: it\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" +"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n" #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2 msgctxt "_" msgid "translator-credits" msgstr "" "Bella Enrico, 2019\n" -"Alessandro Volturno, 2020" +"Alessandro Volturno, 2020, 2022" #. (itstool) path: articleinfo/title #: C/index.docbook:23 msgid "<application>MATE Power Manager</application> Manual" -msgstr "" -"Manuale del <application>Gestore dell'alimentazione di MATE</application>" +msgstr "Manuale di <application>MATE Power Manager</application>" #. (itstool) path: abstract/para #: C/index.docbook:25 @@ -40,8 +39,8 @@ msgid "" "MATE Desktop that manages the power settings for your laptop or desktop " "computer." msgstr "" -"<application>Il Gestore dell'alimentazione di MATE </application> è un " -"demone per il Desktop MATE che gestisce le impostazioni energetiche del tuo " +"<application>MATE Power Manager </application> è un demone della sessione " +"per il Desktop MATE che gestisce le impostazioni energetiche del vostro " "computer, desktop o portatile." #. (itstool) path: articleinfo/copyright @@ -110,18 +109,16 @@ msgid "" "type=\"http\"><application>MATE Power Manager</application> Contact " "Page</ulink>." msgstr "" -"Per segnalare un malfunzionamento o un suggerimento sul Gestore " -"dell'alimentazione di MATE o su questo manuale, segui le indicazioni " -"nella<ulink url=\"https://github.com/mate-desktop/mate-power-manager/\" " -"type=\"http\">Pagina dei contatti di <application>Gestore dell'alimentazione" -" di MATE</application></ulink>." +"Per segnalare un malfunzionamento o un suggerimento su MATE Power Manager o " +"su questo manuale, seguire le indicazioni nella<ulink " +"url=\"https://github.com/mate-desktop/mate-power-manager/\" " +"type=\"http\">Pagina dei contatti di <application>MATE Power " +"Manager</application></ulink>." #. (itstool) path: article/indexterm #: C/index.docbook:115 msgid "<primary><application>MATE Power Manager</application></primary>" -msgstr "" -"<primary><application>Gestore dell'alimentazione di " -"MATE</application></primary>" +msgstr "<primary><application>MATE Power Manager</application></primary>" #. (itstool) path: article/indexterm #: C/index.docbook:118 @@ -139,9 +136,8 @@ msgid "" "<primary><application>MATE Power Manager</application></primary> " "<secondary>Manual</secondary> <tertiary>mate-power-manager</tertiary>" msgstr "" -"<primary><application>Gestore dell'alimentazione di " -"MATE</application></primary> <secondary>Manuale</secondary> <tertiary>mate-" -"power-manager</tertiary>" +"<primary><application>MATE Power Manager</application></primary> " +"<secondary>Manuale</secondary> <tertiary>mate-power-manager</tertiary>" #. (itstool) path: section/para #: C/index.docbook:135 @@ -149,13 +145,13 @@ msgid "" "The MATE Power Manager session daemon is a power management daemon for the " "<systemitem>MATE desktop</systemitem>" msgstr "" -"Il Gestore dell'alimentazione di MATE è il demone per la gestione energetica" -" del <systemitem> desktop MATE</systemitem>" +"MATE Power Manager è il demone per la gestione energetica del " +"<systemitem>desktop MATE</systemitem>" #. (itstool) path: section/title #: C/index.docbook:143 msgid "Usage" -msgstr "Uso" +msgstr "Utilizzo" #. (itstool) path: section/para #: C/index.docbook:144 @@ -164,10 +160,9 @@ msgid "" "startup, but you can manually start <application>MATE Power " "Manager</application> by doing:" msgstr "" -"Il <application>Gestore dell'alimentazione di MATE</application> viene " -"solitamente avviato all'accensione, ma si può avviare il " -"<application>Gestore dell'alimentazione di MATE</application> manualmente " -"seguendo i seguenti passaggi:" +"<application>MATE Power Manager</application> viene solitamente avviato " +"all'accensione, ma si può avviare <application>MATE Power " +"Manager</application> manualmente eseguendo i seguenti passaggi:" #. (itstool) path: varlistentry/term #: C/index.docbook:150 @@ -180,7 +175,7 @@ msgid "" "Type <command>G_MESSAGES_DEBUG=PowerManager mate-power-manager --no-" "daemon</command>, then press <keycap>Return</keycap>:" msgstr "" -"Inserire <command>G_MESSAGES_DEBUG=PowerManager mate-power-manager --no-" +"Digitare <command>G_MESSAGES_DEBUG=PowerManager mate-power-manager --no-" "daemon</command>, quindi premere <keycap>Invio</keycap>:" #. (itstool) path: section/title @@ -194,8 +189,8 @@ msgid "" "When <application>MATE Power Manager</application> has started, the " "following notifications may be displayed." msgstr "" -"Quando il <application>Gestore dell'alimentazione di MATE </application> è " -"avviato, potrebbero apparire le seguenti notifiche." +"Quando il <application>MATE Power Manager</application> è stato avviato, " +"potrebbero apparire le seguenti notifiche." #. (itstool) path: section/title #: C/index.docbook:168 @@ -206,7 +201,7 @@ msgstr "Batteria in fase di scarica" #: C/index.docbook:170 msgid "MATE Power Manager Notification when AC adapter is removed" msgstr "" -"Il Gestore dell'alimentazione di MATE notifica quando l'alimentatore viene " +"Notifica di MATE Power Manager quando l'alimentatore elettrico viene " "disconnesso" #. (itstool) path: imageobject/imagedata @@ -242,8 +237,8 @@ msgstr "Carica completa" msgid "" "MATE Power Manager Notification when laptop primary battery is fully charged" msgstr "" -"Il Gestore dell'alimentazione di MATE notifica quando la batteria del " -"portatile è completamente carica" +"Notifica di MATE Power Manager quando la batteria del portatile è " +"completamente carica" #. (itstool) path: imageobject/imagedata #. This is a reference to an external file such as an image or video. When @@ -278,8 +273,8 @@ msgid "" msgstr "" "Si otterrà una ripetizione della notifica se la carica della batteria scende" " sotto il 95% e viene poi ricaricata completamente. Questo per evitare che " -"vengano mostrate notifiche ripetute su alcune macchine che non comunicano " -"correttamente lo stato di carica al sistema." +"vengano mostrate notifiche ripetute su alcune macchine se la batteria " +"riporta al sistema lo stato di carica in modo errato." #. (itstool) path: section/title #: C/index.docbook:216 @@ -293,12 +288,12 @@ msgid "" "should consider switching to AC power really soon." msgstr "" "Quando la carica della batteria è bassa viene mostrata la seguente notifica." -" E' importante collegarsi all'alimentatore al più presto." +" E' importante collegare l'alimentatore elettrico al più presto." #. (itstool) path: figure/title #: C/index.docbook:222 msgid "MATE Power Manager Notification when battery power is low" -msgstr "Il gestore dell'alimentazione di MATE quando la carica è bassa" +msgstr "Notifica di MATE Power Manager quando la carica è bassa" #. (itstool) path: imageobject/imagedata #. This is a reference to an external file such as an image or video. When @@ -341,9 +336,7 @@ msgstr "" #: C/index.docbook:247 msgid "" "MATE Power Manager Notification when the system power is critically low" -msgstr "" -"Il Gestore dell'alimentazione di MATE notifica quando il livello di carica è" -" critico" +msgstr "Notifica di MATE Power Manager quando il livello di carica è critico" #. (itstool) path: imageobject/imagedata #. This is a reference to an external file such as an image or video. When @@ -362,7 +355,7 @@ msgstr "" #. (itstool) path: section/title #: C/index.docbook:259 msgid "Suspend Failure" -msgstr "Fallimento della sospensione" +msgstr "Sospensione fallita" #. (itstool) path: section/para #: C/index.docbook:260 @@ -373,14 +366,13 @@ msgid "" msgstr "" "Quando si verifica un errore nella sospensione è possibile che venga " "visualizzato il seguente avviso. Il motivo più comune per questa notifica è " -"che l'utente non ha il permesso di sospendere o ibernare il computer." +"che l'utente non dispone dei permessi per sospendere o ibernare il computer." #. (itstool) path: figure/title #: C/index.docbook:266 msgid "MATE Power Manager Notification when suspend failure occurs" msgstr "" -"Il Gestore dell'alimentazione di MATE notifica quando il tentativo di " -"sospensione fallisce" +"Notifica di MATE Power Manager quando il tentativo di sospensione fallisce" #. (itstool) path: imageobject/imagedata #. This is a reference to an external file such as an image or video. When @@ -427,16 +419,16 @@ msgid "" "internal IPC. This allows other applications to query and display the data " "if required." msgstr "" -"E' stato rimosso dalla finestra informativa delle versioni precedenti del " -"Gestore dell'alimentazione di MATE poiché l'interfaccia dati ora utilizza " -"DBUS al posto dell'IPC interno. Questo permette ad altre applicazioni di " -"leggere e visualizzare i dati se richeisto.." +"Questo è stato rimosso dalla finestra informativa delle versioni precedenti " +"di MATE Power Manager poiché l'interfaccia dati ora utilizza DBUS al posto " +"dell'IPC interno. Questo permette ad altre applicazioni di leggere e " +"visualizzare i dati quando richiesto.." #. (itstool) path: figure/title #: C/index.docbook:298 msgid "Power History going from battery power to AC" msgstr "" -"Cronologia di carica della batteria passando all'alimentazione da corrente " +"Cronologia di carica della batteria passando all'alimentazione dalla rete " "elettrica" #. (itstool) path: imageobject/imagedata @@ -460,10 +452,11 @@ msgid "" "required hardware. You may also see other hardware not shown here (for " "example UPS devices) but these are treated the same way as other devices." msgstr "" -"Non è possibile visualizzare alcune opzioni o grafici se il computer non " -"dispone dell'hardware necessario. Possono essere visualizzati anche altri " -"hardware non mostrati qui (ad esempio i dispositivi UPS) ma questi vengono " -"considerati allo stesso modo degli altri dispositivi." +"Potrebbe non essere possibile visualizzare alcune opzioni o grafici se il " +"vostro computer non dispone dell'hardware necessario. Possono essere " +"visualizzati anche altri hardware qui non mostrati (come ad esempio i " +"dispositivi UPS) che però vengono considerati allo stesso modo degli altri " +"dispositivi." #. (itstool) path: section/title #: C/index.docbook:317 @@ -479,8 +472,8 @@ msgid "" "with this graph." msgstr "" "Il grafico mostra la percentuale di carica disponibile per la batteria " -"principale, quindi se si dispone di una batteria principale e di una " -"ausiliaria, verrà mostrato solo il valore medio. Con questo grafico non " +"principale combinata, quindi se si dispone di una batteria principale e di " +"una ausiliaria, verrà mostrato solo il valore medio. Con questo grafico non " "viene mostrata la legenda." #. (itstool) path: section/title @@ -500,12 +493,12 @@ msgid "" "received." msgstr "" "Il grafico mostra la cronologia dell'alimentazione utilizzata dalla batteria" -" principale. Questa linea rappresenta la quantità di energia che viene " -"utilizzata per caricare le batterie o che viene prelevata dalle batterie. La" -" linea dovrebbe andare verso l'alto quando vengono eseguite attività " -"intensive per il processore e verso il basso quando il sistema è inattivo o " -"quando lo schermo è oscurato. Questo grafico mostra una legenda quando sono " -"stati ricevuti dei dati sugli eventi." +" principale composita. Questa linea rappresenta la quantità di energia che " +"viene utilizzata per caricare le batterie o quella che viene prelevata dalle" +" batterie. La linea dovrebbe andare verso l'alto quando vengono eseguite " +"attività intensive per il processore e verso il basso quando il sistema è " +"inattivo o quando lo schermo è smorzato. Questo grafico mostra una legenda " +"quando sono stati ricevuti i dati sugli eventi." #. (itstool) path: note/para #: C/index.docbook:341 @@ -536,11 +529,11 @@ msgid "" "with this graph when data events have been received." msgstr "" "Questo grafico mostra la cronologia della durata stimata per la batteria " -"principale. La linea rappresenta il tempo residuo alla carica completa o " -"alla scarica completa. Dovrebbe andare proporzionalmente verso l'alto quando" -" la durata diminuisce e verso il basso quando la durata aumenta. Con questo " -"grafico viene mostrata una legenda quando sono stati ricevuti dei dati sugli" -" eventi." +"composita principale. La linea rappresenta il tempo richiesto alla carica " +"completa o quello per la scarica completa. Questa linea dovrebbe andare " +"proporzionalmente verso l'alto quando la variazione diminuisce e verso il " +"basso quando la variazione aumenta. Questo grafico mostra una legenda quando" +" sono stati ricevuti i dati sugli eventi." #. (itstool) path: section/title #: C/index.docbook:366 @@ -557,14 +550,14 @@ msgstr "La finestra delle preferenze permette di controllare:" msgid "The LCD brightness when on AC and battery power" msgstr "" "La luminosità del display quando collegato alla rete elettrica oppure alla " -"batteria." +"batteria" #. (itstool) path: listitem/para #: C/index.docbook:377 msgid "The idle time for the screen power-down and suspend action" msgstr "" "Il tempo di inattività perché avvenga lo spegnimento dello schermo e " -"l'azione di sospensione." +"l'azione di sospensione" #. (itstool) path: listitem/para #: C/index.docbook:382 @@ -583,9 +576,9 @@ msgid "" "not writable. This allows administrators to lock-down the actions that a " "user can select." msgstr "" -"Alcuni regoli o opzioni potrebbero essere disabilitate se non è possibile " -"scrivere le chiavi in dconf. Questo permette all'amministratore di sistema " -"di limitare le azioni che l'utente può selezionare." +"Alcuni regoli o opzioni potrebbero essere disabilitati se non è possibile " +"scrivere le chiavi in dconf. Ciò permette all'amministratore di sistema di " +"limitare le azioni che un utente può selezionare." #. (itstool) path: section/title #: C/index.docbook:402 @@ -595,9 +588,7 @@ msgstr "Preferenze di alimentazione dalla rete elettrica" #. (itstool) path: figure/title #: C/index.docbook:404 msgid "MATE Power Manager AC tab" -msgstr "" -"Scheda Alimentazione da rete elettrica del Gestore dell'alimentazione di " -"MATE" +msgstr "Scheda Alimentazione da rete elettrica di MATE Power Manager" #. (itstool) path: imageobject/imagedata #. This is a reference to an external file such as an image or video. When @@ -621,7 +612,7 @@ msgstr "Preferenze con alimentazione a batteria" #. (itstool) path: figure/title #: C/index.docbook:418 msgid "MATE Power Manager battery tab" -msgstr "Scheda Alimentazione da batteria del Gestore di alimentazione" +msgstr "Scheda Alimentazione da batteria di MATE Power Manager" #. (itstool) path: imageobject/imagedata #. This is a reference to an external file such as an image or video. When @@ -643,8 +634,9 @@ msgid "" "This allows a powerful computer to reduce the power usage when idle, or when" " the full capabilities are not required." msgstr "" -"Permette ad un computer di ridurre il consumo energetico quando è inattivo o" -" quando non sono richieste tutte le potenzialità." +"Questo consente ad un computer particolarmente prestante di ridurre il " +"consumo energetico quando è inattivo o quando non sono richieste tutte le " +"sue potenzialità." #. (itstool) path: section/title #: C/index.docbook:434 @@ -654,7 +646,7 @@ msgstr "Preferenze generali" #. (itstool) path: figure/title #: C/index.docbook:436 msgid "MATE Power Manager general tab" -msgstr "Scheda Generale del Gestore dell'alimentazione di MATE" +msgstr "Scheda Generale del Gestore di MATE Power Manager" #. (itstool) path: imageobject/imagedata #. This is a reference to an external file such as an image or video. When @@ -691,10 +683,10 @@ msgstr "" "stata premuta, avvia un conteggio. Quando il valore di questo contatore " "raggiunge il valore impostato in <command>mate-screensaver-" "preferences</command>, allora il login è contrassegnato come 'sessione " -"inattiva'. A questo punto il <application>Gestore dell'alimentazione di " -"MATE</application> esegue tutte le operazioni di inattività della sessione, " -"come l'attivazione della modalità a basso consumo e la riduzione della " -"luminosità dello schermo." +"inattivà. A questo punto il <application>MATE Power Manager</application> " +"esegue tutte le operazioni di inattività della sessione, come l'attivazione " +"della modalità a basso consumo e la riduzione della luminosità dello " +"schermo." #. (itstool) path: figure/title #: C/index.docbook:461 @@ -726,12 +718,12 @@ msgid "" "idle, then the idle action is performed, which is usually to turn off the " "screen, or to suspend or hibernate." msgstr "" -"Non appena la sessione viene considerata inattiva, il <application>Gestore " -"dell'alimentazione di MATE</application> avvia il proprio timer di sistema. " -"Quando viene raggiunto il timeout impostato in <command>mate-power-" -"preferences</command> e il carico della CPU è basso, allora viene eseguita " -"l'azione di inattività che di solito consiste nello spegnere lo schermo, " -"sospendere il computer o ibernarlo." +"Non appena la sessione viene considerata inattiva, il <application>MATE " +"Power Manager</application> avvia il proprio timer di sistema. Quando viene " +"raggiunto il timeout impostato in <command>mate-power-preferences</command> " +"e il carico della CPU è basso, allora viene eseguita l'azione di inattività " +"che di solito consiste nello spegnere lo schermo, sospendere il computer o " +"ibernarlo." #. (itstool) path: section/para #: C/index.docbook:479 @@ -739,17 +731,18 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" "Per chiarezza è bene specificare che i cursori in <command>mate-power-" "preferences</command> sono impostati per avviarsi 1 minuto dopo il tempo di " "inattività della sessione, in quanto non possiamo logicamente avviarli prima" " che questa sia contrassegnata come inattiva. Se si regola il valore del " "timeout di 'sessione inattiva' in <command>mate-screensaver-" -"preferences</command>, l'avvio delle opzioni in <command>mate-power-" -"preferences</command> cambierà di conseguenza." +"preferences</command>, l'avvio dei cursori in <command>mate-power-" +"preferences</command> verrà automaticamente cambiato come conseguenza." #. (itstool) path: section/title #: C/index.docbook:491 @@ -759,7 +752,7 @@ msgstr "Preferenze avanzate" #. (itstool) path: section/title #: C/index.docbook:494 msgid "Screen Dim Brightness" -msgstr "Variazione della luminosità dello schermo" +msgstr "Luminosità dello smorzamento dello schermo" #. (itstool) path: note/para #: C/index.docbook:496 @@ -783,11 +776,11 @@ msgid "" "screen\" in mate-screensaver when the lid is closed, or the system performs " "a suspend or hibernate action." msgstr "" -"Per impostazione predefinita, il <application>Gestore dell'alimentazione di " -"MATE</application> supporta uno schema di blocco semplice. Ciò significa che" -" lo schermo si blocca se viene impostato \"Blocca schermo\" in mate-" -"screensaver, quando viene chiuso il coperchio oppure quando il sistema " -"esegue un'azione di sospensione o ibernazione." +"Per impostazione predefinita, il <application>MATE Power " +"Manager</application> supporta un semplice schema di blocco dello schermo. " +"Ciò significa che lo schermo si blocca se viene impostato \"Blocca schermo\"" +" in mate-screensaver, quando viene chiuso il coperchio oppure quando il " +"sistema esegue un'azione di sospensione o ibernazione." #. (itstool) path: section/para #: C/index.docbook:511 @@ -848,7 +841,7 @@ msgstr "MATE Power Applets" #. (itstool) path: section/title #: C/index.docbook:560 msgid "Brightness Applet" -msgstr "Applet luminosità" +msgstr "Brightness Applet" #. (itstool) path: section/para #: C/index.docbook:561 @@ -858,15 +851,15 @@ msgid "" "laptop without brightness buttons, as you can now change the brightness " "easily." msgstr "" -"L'applet luminosità consente di cambiare temporaneamente la luminosità senza" -" modificare il l'impostazione predefinita. Può essere utile se si dispone di" -" un computer portatile senza pulsanti dedicati a regolare la luminosità " +"Brightness Applet consente di cambiare temporaneamente la luminosità senza " +"modificare il l'impostazione predefinita. Può essere utile se si dispone di " +"un computer portatile senza pulsanti dedicati a regolare la luminosità " "poiché è possibile modificare facilmente la luminosità dello schermo." #. (itstool) path: figure/title #: C/index.docbook:568 msgid "Brightness applet drop-down." -msgstr "Applet a discesa per la luminosità" +msgstr "Tendina di Brightness Applet" #. (itstool) path: imageobject/imagedata #. This is a reference to an external file such as an image or video. When @@ -891,7 +884,7 @@ msgstr "" #. (itstool) path: section/title #: C/index.docbook:587 msgid "Inhibit Applet" -msgstr "Applet di inibizione" +msgstr "Inhibit Applet" #. (itstool) path: section/para #: C/index.docbook:588 @@ -901,16 +894,16 @@ msgid "" "proprietary programs such as VMWare or Matlab. Just click the icon for the " "auto-suspend to be inhibited, and click it again for normal operation." msgstr "" -"L'applet di inibizione permette di impedire l'auto-sospensione del computer " -"quando questo risulta inattivo. Può essere necessario se si utilizzano " -"programmi vecchi o proprietari come VMWare o Matlab. È sufficiente fare clic" -" sull'icona per bloccare l'auto-sospensione e fare nuovamente clic su di " -"esso per tornare al funzionamento normale." +"<application>Inhibit Applet</application> permette di impedire l'auto-" +"sospensione del computer quando questo risulta inattivo. Può essere " +"necessario se si utilizzano programmi vecchi o proprietari come VMWare o " +"Matlab. È sufficiente fare clic sull'icona per bloccare l'auto-sospensione e" +" fare nuovamente clic su di esso per tornare al funzionamento normale." #. (itstool) path: figure/title #: C/index.docbook:596 msgid "Inhibit applet in inhibited state." -msgstr "Applet di inibizione in stato Inibito." +msgstr "Inhibit Applet nello stato di inibizione." #. (itstool) path: imageobject/imagedata #. This is a reference to an external file such as an image or video. When @@ -933,10 +926,10 @@ msgid "" "make the application use the <function>Inhibit()</function> and " "<function>UnInhibit()</function> methods as this should 'just work'." msgstr "" -"Non usare questa applet se si utilizza solo software MATE, segnalare invece " -"un bug per fare in modo che l'applicazione utilizzi i metodi " -"<function>Inhibit()</function> e <function>UnInhibit()</function>, perché " -"questi dovrebbero funzionare." +"Non usare questa applet se si utilizza esclusivamente software MATE, " +"segnalare invece un bug per fare in modo che l'applicazione utilizzi i " +"metodi <function>Inhibit()</function> e <function>UnInhibit()</function>, " +"perché questi dovrebbero funzionare." #. (itstool) path: section/title #: C/index.docbook:618 @@ -1002,11 +995,11 @@ msgid "" msgstr "" "La sospensione è una funzione di risparmio energetico che garantisce il più " "basso livello di consumo energetico tale da permettere la conservazione dei " -"dati dei programmi nella memoria. Quando il computer è sospeso qualsiasi " -"operazione non verrà eseguita fino a quando non viene ripresa la normale " -"attività, la quale non riprenderà finché non avverrà un evento esterno come " -"la pressione di un tasto. Generalmente ci vogliono pochi secondi per " -"sospendere e far ripartire il computer." +"dati dei programmi nella memoria. Quando il computer è nello stato di " +"Sospensione, qualsiasi operazione di calcolo non verrà eseguita fino a " +"quando non riprende la normale attività, e ciò non accadrà finché non si " +"verifica un evento esterno come la pressione di un tasto. Generalmente ci " +"vogliono pochi secondi per sospendere e poi far ripartire il computer." #. (itstool) path: caution/para #: C/index.docbook:655 @@ -1016,9 +1009,9 @@ msgid "" "or run out of battery power on a laptop then you will lose your work." msgstr "" "In sospensione viene però ancora usata una piccola quantità di energia, " -"quindi non è consigliabile se prevedi di lasciarlo in questo stato per " -"lunghi periodi. Se rimuovi l'alimentazione su un desktop o esaurisci la " -"batteria su un portatile perderai il lavoro non salvato." +"quindi essa non è consigliabile per una azione da eseguire quando la " +"batteria è bassa. Se si rimuove l'alimentazione su un desktop o si esaurisce" +" la batteria di un portatile, si perderà tutto il lavoro non salvato." #. (itstool) path: section/para #: C/index.docbook:662 @@ -1032,12 +1025,12 @@ msgid "" "computer." msgstr "" "L'ibernazione salva lo stato completo del computer sul disco rigido e spegne" -" l'alimentazione, in modo che il computer risulti spento. Non verrà riacceso" -" finché non viene comandato da un evento esterno, come la pressione di un " -"tasto. Questo è lo stato di risparmio energetico più efficiente disponibile." -" Se si rimuove l'alimentazione su un desktop o siesaurisce la batteria di un" -" portatile il lavoro non andrà perso. Può volerci anche più di un minuto per" -" ibernare e risvegliare il computer." +" l'alimentazione, in modo che il computer risulti spento. Esso non verrà " +"riacceso finché non si verifica comandato da un evento esterno, come la " +"pressione di un tasto. Questo è lo stato di risparmio energetico più " +"efficiente disponibile. Se si rimuove l'alimentazione su un desktop o si " +"esaurisce la batteria di un portatile il lavoro non andrà perso. Può volerci" +" anche più di un minuto per ibernare o risvegliare il computer." #. (itstool) path: section/title #: C/index.docbook:675 @@ -1057,12 +1050,12 @@ msgid "" " <literal>org.mate.power-manager dpms-method-battery</literal> to one of the" " modes that work, e.g. standby, suspend or off." msgstr "" -"È necessario cambiare la modalità di sospensione del DPMS usato dal " -"<application>Gestore dell'alimentazione di MATE</application>. Aprire " -"<command>dconf-editor</command>, quindi cambiare le chiavi " -"<literal>org.mate.mate.power-manager dpms-method-ac</literal> e " -"<literal>org.mate.power-manager dpms-method-battery</literal> in una delle " -"modalità che risultano funzionanti, ad esempio standby, suspend o off." +"È necessario cambiare la modalità di sospensione del DPMS utilizzato da " +"<application>MATE Power Manager</application>. Aprire <command>dconf-" +"editor</command>, quindi modificare le chiavi <literal>org.mate.mate.power-" +"manager dpms-method-ac</literal> e <literal>org.mate.power-manager dpms-" +"method-battery</literal> in una delle modalità che risultano funzionanti, ad" +" esempio standby, suspend oppure off." #. (itstool) path: section/title #: C/index.docbook:689 @@ -1083,11 +1076,11 @@ msgid "" "use-time-for-policy false </command>" msgstr "" "Potresti essere in grado di utilizzare la carica percentuale per g-p-m da " -"utilizzare come dati della carica. Apri <command>dconf-editor</command>, " -"quindi modifica la chiave <command>org.mate.power-manager org.mate.power-" -"manager</command> a \"false\". Si può fare facilmente con il seguente " -"comando: <command>gsettings get org.mate.power-manager use-time-for-policy " -"false</command>" +"utilizzare come dati della carica. Aprire <command>dconf-editor</command>, " +"quindi modificare la chiave <command>org.mate.power-manager org.mate.power-" +"manager</command> a \"false\". Ciò può essere facilmente fatto con il " +"seguente comando: <command>gsettings get org.mate.power-manager use-time-" +"for-policy false</command>" #. (itstool) path: section/para #: C/index.docbook:703 @@ -1095,8 +1088,8 @@ msgid "" "This should get the policy actions working for you, but of course the time " "remaining will still be incorrect." msgstr "" -"Questo dovrebbe permettere l'uso delle politiche di risparmio energetico, ma" -" naturalmente il tempo rimanente sarà ancora errato." +"Ciò dovrebbe permettere il funzionamento delle politiche di risparmio " +"energetico, ma naturalmente il tempo rimanente sarà ancora incorretto." #. (itstool) path: section/title #: C/index.docbook:710 @@ -1114,10 +1107,9 @@ msgid "" "save power by hibernating or suspending." msgstr "" "Se l'applicazione sta eseguendo un'operazione lunga, potresti voler " -"disabilitare la sospensione per un po' di tempo. Dovresti usare mate-session" -" se davvero si desidera che l'utente non sia in grado di sospendere il " -"computer o che lo stesso risparmi energia con l'ibernazione o la " -"sospensione." +"disabilitare la sospensione per un po' di tempo. Si potrebbe usare mate-" +"session se si vuole veramente che l'utente non sia in grado di sospendere il" +" computer o che esso risparmi energia con l'ibernazione o la sospensione." #. (itstool) path: section/title #: C/index.docbook:723 @@ -1125,8 +1117,8 @@ msgid "" "I'm running ACPI. Why do events (such as removing the AC adapter) take so " "long to register?" msgstr "" -"Utilizzo ACPI. Perché la registrazione degli eventi (come la rimozione " -"dell'alimentatore) richiede così tanto tempo?" +"Utilizzo ACPI. Perché gli eventi (come la rimozione dell'alimentatore) " +"richiedono così tanto tempo per essere registrati?" #. (itstool) path: section/para #: C/index.docbook:727 @@ -1162,15 +1154,16 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" "Cercare il processo <command>hald-addon-acpi</command>. Se questo non è in " -"esecuzione, verificare che HAL venga eseguito con l'opzione <command" -">--retain-privileges</command> nell'initscript <command>haldaemon</command>." -" Un'alternativa può essere l'uso di acpid al posto del file proc del kernel." +"esecuzione, verificare che HAL venga eseguito con l'opzione " +"<command>--retain-privileges</command> nell'initscript " +"<command>haldaemon</command>. Un'alternativa può essere l'uso di acpid al " +"posto del file proc del kernel." #. (itstool) path: para/ulink #: C/legal.xml:9 @@ -1191,8 +1184,8 @@ msgstr "" "documento in base ai termini della GNU Free Documentation License (GFDL), " "Versione 1.1 o qualsiasi versione successiva pubblicata dalla Free Software " "Foundation senza sezioni invarianti, senza testi di copertina e nessun testo" -" di retro copertina. Puoi trovare una copia del GFDL qui <_:ulink-1/> o nel " -"file COPYING-DOCS distribuito con questo manuale." +" di retro copertina. Potete trovare una copia della GFDL qui <_:ulink-1/> o " +"nel file COPYING-DOCS distribuito con questo manuale." #. (itstool) path: legalnotice/para #: C/legal.xml:12 @@ -1202,7 +1195,7 @@ msgid "" "you can do so by adding a copy of the license to the manual, as described in" " section 6 of the license." msgstr "" -"Questo manuale fa parte di una raccolta di manuali MATE distribuita in " +"Questo manuale fa parte di una raccolta di manuali MATE distribuiti in " "conformità con la GFDL. Per poter distribuire questo manuale separatamente, " "è necessario inserirvi una copia della licenza, come descritto nella sezione" " 6 della licenza." @@ -1217,10 +1210,10 @@ msgid "" "capital letters." msgstr "" "Molti dei nomi usati dalle aziende per distinguere i propri prodotti e " -"servizi sono rivendicati come marchi. Quando questi nomi compaiono nella " -"documentazione di MATE, e i partecipanti al MATE Documentation Project sono " -"consapevoli del loro utilizzo, essi vengono scritti in lettere maiuscole o " -"con l'iniziale maiuscola." +"servizi sono rivendicati come marchi registrati. Quando questi nomi " +"compaiono nella documentazione di MATE, e i partecipanti al MATE " +"Documentation Project sono consapevoli del loro utilizzo, essi vengono " +"scritti in lettere maiuscole o con l'iniziale maiuscola." #. (itstool) path: listitem/para #: C/legal.xml:35 @@ -1237,19 +1230,19 @@ msgid "" "ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED VERSION " "OF THE DOCUMENT IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER; AND" msgstr "" -"IL DOCUMENTO VIENE FORNITO SENZA GARANZIE DI ALCUN TIPO, ESPLICITE O " -"IMPLICITE, INCLUSE, MA SENZA LIMITAZIONE, LE GARANZIE ATTESTANTI CHE IL " -"DOCUMENTO O LE SUE VERSIONI MODIFICATE SIANO PRIVI DI DIFETTI, " -"COMMERCIALIZZABILI, IDONEI A UN DETERMINATO SCOPO O CHE NON VIOLINO DIRITTI " -"DI TERZI. SI DECLINA QUALUNQUE RESPONSABILITÀ RIGUARDO AI RISCHI INERENTI LA" -" QUALITÀ, L'ACCURATEZZA E LE PRESTAZIONI DEL DOCUMENTO O DI UNA SUA VERSIONE" -" MODIFICATA. QUALORA UN DOCUMENTO O UNA SUA VERSIONE MODIFICATA DOVESSERO " -"PRESENTARE QUALUNQUE TIPO DI DIFETTO, IL COSTO DI EVENTUALI INTERVENTI DI " -"ASSISTENZA, RIPARAZIONE O CORREZIONE SARÀ A CARICO DELL'UTENTE (NON DEL " -"REDATTORE INIZIALE, DELL'AUTORE O DI ALTRI COLLABORATORI). QUESTA " +"IL DOCUMENTO VIENE FORNITO SULLA BASE DEL \"COME È\" SENZA GARANZIE DI ALCUN" +" TIPO, ESPLICITE O IMPLICITE, INCLUSE, MA SENZA LIMITAZIONE, LE GARANZIE " +"ATTESTANTI CHE IL DOCUMENTO O LE SUE VERSIONI MODIFICATE SIANO PRIVI DI " +"DIFETTI, COMMERCIALIZZABILI, IDONEI A UN DETERMINATO SCOPO O CHE NON VIOLINO" +" DIRITTI DI TERZI. SI DECLINA QUALUNQUE RESPONSABILITÀ RIGUARDO AI RISCHI " +"INERENTI LA QUALITÀ, L'ACCURATEZZA E LE PRESTAZIONI DEL DOCUMENTO O DI UNA " +"SUA VERSIONE MODIFICATA. QUALORA UN DOCUMENTO O UNA SUA VERSIONE MODIFICATA " +"DOVESSERO PRESENTARE QUALUNQUE TIPO DI DIFETTO, IL COSTO DI EVENTUALI " +"INTERVENTI DI ASSISTENZA, RIPARAZIONE O CORREZIONE SARÀ A CARICO DELL'UTENTE" +" (NON DEL REDATTORE INIZIALE, DELL'AUTORE O DI ALTRI COLLABORATORI). QUESTA " "LIMITAZIONE DELLA GARANZIA COSTITUISCE PARTE ESSENZIALE DELLA LICENZA. L'USO" " DEL DOCUMENTO O DELLE SUE VERSIONI MODIFICATE È CONSENTITO SOLO ENTRO I " -"TERMINI DI QUESTA LIMITAZIONE DELLA GARANZIA;" +"TERMINI DI QUESTA LIMITAZIONE DELLA GARANZIA; E" #. (itstool) path: listitem/para #: C/legal.xml:55 @@ -1265,17 +1258,17 @@ msgid "" "VERSIONS OF THE DOCUMENT, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE" " POSSIBILITY OF SUCH DAMAGES." msgstr "" -"IN NESSUNA CIRCOSTANZA E PER NESSUNA RAGIONE LEGALE, INCLUSI I PRINCIPI DI " -"COLPA (INCLUSA LA NEGLIGENZA), ACCORDO CONTRATTUALE O ALTRO, SARÀ POSSIBILE " -"CONSIDERARE L'AUTORE, IL REDATTORE INIZIALE, GLI ALTRI COLLABORATORI, " -"QUALUNQUE DISTRIBUTORE DEL DOCUMENTO O DI UNA SUA VERSIONE MODIFICATA O " -"QUALUNQUE FORNITORE DELLE PERSONE CITATE, RESPONSABILE NEI CONFRONTI DI " -"QUALUNQUE PERSONA PER DANNI DIRETTI, INDIRETTI, SPECIALI, INCIDENTALI O " -"CONSEGUENTI DI QUALUNQUE NATURA, INCLUSI, MA SENZA LIMITAZIONE, I DANNI PER " -"PERDITA DI AVVIAMENTO, INTERRUZIONE DEL LAVORO, GUASTO O MALFUNZIONAMENTO " -"DEL COMPUTER O QUALUNQUE ALTRO DANNO O PERDITA DERIVANTE O CORRELATA ALL'USO" -" DEL DOCUMENTO O DI UNA SUA VERSIONE MODIFICATA, ANCHE QUALORA LE PERSONE " -"CITATE FOSSERO STATE INFORMATE DELLA POSSIBILITÀ DI TALI DANNI." +"IN NESSUNA CIRCOSTANZA E PER NESSUNA RAGIONE LEGALE, SIA ESSO TORTO (INCLUSA" +" LA NEGLIGENZA), ACCORDO CONTRATTUALE O ALTRO, SARÀ POSSIBILE CONSIDERARE " +"L'AUTORE, IL REDATTORE INIZIALE, GLI ALTRI COLLABORATORI, QUALUNQUE " +"DISTRIBUTORE DEL DOCUMENTO O DI UNA SUA VERSIONE MODIFICATA O QUALUNQUE " +"FORNITORE DELLE PERSONE CITATE, RESPONSABILE NEI CONFRONTI DI QUALUNQUE " +"PERSONA PER DANNI DIRETTI, INDIRETTI, SPECIALI, INCIDENTALI O CONSEGUENTI DI" +" QUALUNQUE NATURA, INCLUSI, MA SENZA LIMITAZIONE, I DANNI PER PERDITA DI " +"AVVIAMENTO, INTERRUZIONE DEL LAVORO, GUASTO O MALFUNZIONAMENTO DEL COMPUTER " +"O QUALUNQUE ALTRO DANNO O PERDITA DERIVANTE O CORRELATA ALL'USO DEL " +"DOCUMENTO O DI UNA SUA VERSIONE MODIFICATA, ANCHE QUALORA LE PERSONE CITATE " +"FOSSERO STATE INFORMATE DELLA POSSIBILITÀ DI TALI DANNI." #. (itstool) path: legalnotice/para #: C/legal.xml:28 @@ -1301,10 +1294,10 @@ msgid "" "Free Software Foundation; either version 2 of the License, or (at your " "option) any later version." msgstr "" -"Gestore dell'alimentazione di MATE è software libero; è possibile " -"ridistribuirlo o modificarlo secondo i termini della licenza GNU General " -"Public License, come pubblicata dalla Free Software Foundation; versione 2 " -"della licenza, o (a scelta) una versione più recente." +"MATE Power Manager è software libero; è possibile ridistribuirlo o " +"modificarlo secondo i termini della licenza GNU General Public License, come" +" pubblicata dalla Free Software Foundation; versione 2 della licenza, o (a " +"scelta) una qualsiasi versione più recente." #. (itstool) path: formalpara/para #: C/legal.xml:83 @@ -1314,10 +1307,10 @@ msgid "" "or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for " "more details." msgstr "" -"Gestore dell'alimentazione di MATE è distribuito nella speranza che possa " -"risultare utile, ma SENZA ALCUNA GARANZIA, nemmeno la garanzia implicita di " -"COMMERCIABILITÀ o APPLICABILITÀ PER UNO SCOPO PARTICOLARE. Per maggiori " -"dettagli consultare la GNU General Public License." +"MATE Power Manager è distribuito nella speranza che possa risultare utile, " +"ma SENZA ALCUNA GARANZIA, nemmeno la garanzia implicita di COMMERCIABILITÀ o" +" APPLICABILITÀ PER UNO SCOPO PARTICOLARE. Per maggiori dettagli consultare " +"la GNU General Public License." #. (itstool) path: formalpara/para #: C/legal.xml:88 @@ -1326,7 +1319,6 @@ msgid "" " MATE Power Manager; if not, write to the Free Software Foundation, Inc., 51" " Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA." msgstr "" -"Una copia della GNU General Public License dovrebbe essere stata fornita con" -" Gestore dell'alimentazione di MATE. In caso contrario scrivi a Free " -"Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA " -"02110-1301, USA." +"Si dovrebbe aver ricevuto una copia della GNU General Public License MATE " +"Power Manager. In caso contrario scrivere a Free Software Foundation, Inc., " +"51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA." diff --git a/help/ja/ja.po b/help/ja/ja.po index 752acec..fcc2a57 100644 --- a/help/ja/ja.po +++ b/help/ja/ja.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Green, 2021\n" "Language-Team: Japanese (https://www.transifex.com/mate/teams/13566/ja/)\n" @@ -677,9 +677,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" "これをより明確にすると、論理的にセッションがアイドルとしてマークされる前にトリガすることはできないので、<command>mate-power-" "preferences</command> はセッション・タイムアウト +1 分の値で開始するように設定されています。<command>mate-" @@ -960,10 +961,11 @@ msgid "" " <literal>org.mate.power-manager dpms-method-battery</literal> to one of the" " modes that work, e.g. standby, suspend or off." msgstr "" -"<application>MATE 電源管理</application>が使用する DPMS サスペンドモードを変更する必要があります。<command" -">dconf-editor</command> を開き、<literal>org.mate.power-manager dpms-method-" -"ac</literal> キー と <literal>org.mate.power-manager dpms-method-" -"battery</literal> キーをスタンバイ、サスペンド、オフなどのうちで動作可能なモードに変更してください。" +"<application>MATE 電源管理</application>が使用する DPMS " +"サスペンドモードを変更する必要があります。<command>dconf-editor</command> " +"を開き、<literal>org.mate.power-manager dpms-method-ac</literal> キー と " +"<literal>org.mate.power-manager dpms-method-battery</literal> " +"キーをスタンバイ、サスペンド、オフなどのうちで動作可能なモードに変更してください。" #. (itstool) path: section/title #: C/index.docbook:689 @@ -1044,10 +1046,10 @@ msgstr "最初のケースでは、実行中のHALプロセスを検索します #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" "プロセス <command>hald-addon-acpi</command> " "をチェックしてください。もし実行されていない場合は、<command>haldaemon</command> の initscript で " diff --git a/help/ka/ka.po b/help/ka/ka.po index 1d4c79d..77626c3 100644 --- a/help/ka/ka.po +++ b/help/ka/ka.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Georgian (https://www.transifex.com/mate/teams/13566/ka/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/kab/kab.po b/help/kab/kab.po index f8c5048..babf266 100644 --- a/help/kab/kab.po +++ b/help/kab/kab.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Slimane Selyan AMIRI <[email protected]>, 2020\n" "Language-Team: Kabyle (https://www.transifex.com/mate/teams/13566/kab/)\n" @@ -597,9 +597,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -922,10 +923,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/kk/kk.po b/help/kk/kk.po index 16f2f58..a000d2a 100644 --- a/help/kk/kk.po +++ b/help/kk/kk.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Kazakh (https://www.transifex.com/mate/teams/13566/kk/)\n" @@ -595,9 +595,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -920,10 +921,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/kn/kn.po b/help/kn/kn.po index 0e9606b..9608e26 100644 --- a/help/kn/kn.po +++ b/help/kn/kn.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: karthik holla <[email protected]>, 2018\n" "Language-Team: Kannada (https://www.transifex.com/mate/teams/13566/kn/)\n" @@ -597,9 +597,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -922,10 +923,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ko/ko.po b/help/ko/ko.po index aedb776..b03e7e9 100644 --- a/help/ko/ko.po +++ b/help/ko/ko.po @@ -2,14 +2,14 @@ # Translators: # Seong-ho Cho <[email protected]>, 2018 # Stefano Karapetsas <[email protected]>, 2018 -# 박정규(Jung-Kyu Park) <[email protected]>, 2018 +# 1763f4a4329a2376c933c5e919a36cbc_341ca53 <1f851310383599d03339229d772e1290_119292>, 2018 # Wolfgang Ulbrich <[email protected]>, 2018 # JungHee Lee <[email protected]>, 2021 # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: JungHee Lee <[email protected]>, 2021\n" "Language-Team: Korean (https://www.transifex.com/mate/teams/13566/ko/)\n" @@ -628,9 +628,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -959,10 +960,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ku/ku.po b/help/ku/ku.po index 99518f2..07c8b03 100644 --- a/help/ku/ku.po +++ b/help/ku/ku.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Kurdish (https://www.transifex.com/mate/teams/13566/ku/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ky/ky.po b/help/ky/ky.po index 91c211e..e1788a6 100644 --- a/help/ky/ky.po +++ b/help/ky/ky.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: 41e38594a6ab66d45dbd71e8e44a0b16_36d21e8, 2018\n" "Language-Team: Kyrgyz (https://www.transifex.com/mate/teams/13566/ky/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/lt/lt.po b/help/lt/lt.po index ec39a50..20675f6 100644 --- a/help/lt/lt.po +++ b/help/lt/lt.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Džiugas Grėbliūnas <[email protected]>, 2020\n" "Language-Team: Lithuanian (https://www.transifex.com/mate/teams/13566/lt/)\n" @@ -607,9 +607,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -932,10 +933,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/lv/lv.po b/help/lv/lv.po index 4ef631a..d342f63 100644 --- a/help/lv/lv.po +++ b/help/lv/lv.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: duck <[email protected]>, 2018\n" "Language-Team: Latvian (https://www.transifex.com/mate/teams/13566/lv/)\n" @@ -597,9 +597,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -922,10 +923,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/mai/mai.po b/help/mai/mai.po index d109c70..5517dc4 100644 --- a/help/mai/mai.po +++ b/help/mai/mai.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Maithili (https://www.transifex.com/mate/teams/13566/mai/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/mg/mg.po b/help/mg/mg.po index bc8205c..d4f55ec 100644 --- a/help/mg/mg.po +++ b/help/mg/mg.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Malagasy (https://www.transifex.com/mate/teams/13566/mg/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/mk/mk.po b/help/mk/mk.po index db9b423..35d3f05 100644 --- a/help/mk/mk.po +++ b/help/mk/mk.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: exoos <[email protected]>, 2018\n" "Language-Team: Macedonian (https://www.transifex.com/mate/teams/13566/mk/)\n" @@ -595,9 +595,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -920,10 +921,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ml/ml.po b/help/ml/ml.po index 6e883ac..194c50f 100644 --- a/help/ml/ml.po +++ b/help/ml/ml.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Malayalam (https://www.transifex.com/mate/teams/13566/ml/)\n" @@ -596,9 +596,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -921,10 +922,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/mn/mn.po b/help/mn/mn.po index 4d827b0..8cf0439 100644 --- a/help/mn/mn.po +++ b/help/mn/mn.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Mongolian (https://www.transifex.com/mate/teams/13566/mn/)\n" @@ -596,9 +596,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -921,10 +922,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/mr/mr.po b/help/mr/mr.po index 3ff55df..3f9b154 100644 --- a/help/mr/mr.po +++ b/help/mr/mr.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Vaibhav S Dalvi <[email protected]>, 2018\n" "Language-Team: Marathi (https://www.transifex.com/mate/teams/13566/mr/)\n" @@ -595,9 +595,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -920,10 +921,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ms/ms.po b/help/ms/ms.po index 6b741e3..689482e 100644 --- a/help/ms/ms.po +++ b/help/ms/ms.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: abuyop <[email protected]>, 2021\n" "Language-Team: Malay (https://www.transifex.com/mate/teams/13566/ms/)\n" @@ -712,16 +712,17 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" "Iaitu, pelungsur dalam <command>mate-power-preferences</command> telah " "ditetapkan untuk mulakan nilai session-timeout + 1 minit, kerana secara " "logiknya tidak boleh dipicu sebelum sesi dianggap sebagai melahu. Jika anda " "melaras nilai had masa tamat 'session idle' dalam <command>mate-" -"screensaver-preferences</command> maka nilai mula pelungsur dalam <command" -">mate-power-preferences</command> juga akan berubah." +"screensaver-preferences</command> maka nilai mula pelungsur dalam " +"<command>mate-power-preferences</command> juga akan berubah." #. (itstool) path: section/title #: C/index.docbook:491 @@ -1054,10 +1055,10 @@ msgid "" "use-time-for-policy false </command>" msgstr "" "Anda boleh gunakan cas peratus bagi g-p-m to use menggunakan data dasar. " -"Buka <command>dconf-editor</command>, kemudian ubah kunci <command>org.mate" -".power-manager use-time-for-policy</command> menjadi false. Anda juga boleh " -"lakukannya dengan mudah iaitu: <command> gsettings get org.mate.power-" -"manager use-time-for-policy false </command>" +"Buka <command>dconf-editor</command>, kemudian ubah kunci " +"<command>org.mate.power-manager use-time-for-policy</command> menjadi false." +" Anda juga boleh lakukannya dengan mudah iaitu: <command> gsettings get " +"org.mate.power-manager use-time-for-policy false </command>" #. (itstool) path: section/para #: C/index.docbook:703 @@ -1127,10 +1128,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" "Dan periksa proses <command>hald-addon-acpi</command>. Jika tidak " "dijalankan, sila pastikan HAL telah dijalankan bersama-sama dengan pilihan " diff --git a/help/nb/nb.po b/help/nb/nb.po index 08e927b..15ec303 100644 --- a/help/nb/nb.po +++ b/help/nb/nb.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Jan Sherdahl, 2021\n" "Language-Team: Norwegian Bokmål (https://www.transifex.com/mate/teams/13566/nb/)\n" @@ -612,9 +612,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -937,10 +938,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/nds/nds.po b/help/nds/nds.po index 043d24c..9a6e21e 100644 --- a/help/nds/nds.po +++ b/help/nds/nds.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Low German (https://www.transifex.com/mate/teams/13566/nds/)\n" @@ -597,9 +597,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -922,10 +923,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ne/ne.po b/help/ne/ne.po index a74f41a..55ad571 100644 --- a/help/ne/ne.po +++ b/help/ne/ne.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: chautari <[email protected]>, 2018\n" "Language-Team: Nepali (https://www.transifex.com/mate/teams/13566/ne/)\n" @@ -598,9 +598,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -923,10 +924,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/nl/nl.po b/help/nl/nl.po index a9675a5..6a25800 100644 --- a/help/nl/nl.po +++ b/help/nl/nl.po @@ -4,14 +4,14 @@ # Pjotr <[email protected]>, 2018 # dragnadh, 2018 # b9b0d258fa591da5350b6e67cf68cd68_9fecbb4 <28506b9ff23f99a34b566250ce31bbad_250479>, 2018 -# Benji Leenders, 2020 +# kaasknak, 2021 # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" -"Last-Translator: Benji Leenders, 2020\n" +"Last-Translator: kaasknak, 2021\n" "Language-Team: Dutch (https://www.transifex.com/mate/teams/13566/nl/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -609,9 +609,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -934,10 +935,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink @@ -1026,6 +1027,17 @@ msgid "" "VERSIONS OF THE DOCUMENT, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE" " POSSIBILITY OF SUCH DAMAGES." msgstr "" +"ONDER GEEN ENKELE OMSTANDIGHEDEN EN ONDER GEEN JURIDISCHE THEORIE, ZIJ HET " +"WETTELIJK (INCLUSIEF NALATIGHEID), CONTRACT, OF ANDERZIJDS ZAL DE AUTEUR, " +"INITIËLE AUTEUR, ENIGE BIJDRAGER VAN HET DOCUMENT OF DE AANPASTE VERSIE VAN " +"HET DOCUMENT, NOCH ENIGE LEVERANCIER VAN EEN VAN DEZE PARTIJEN, " +"AANSPRAKELIJK GEHOUDEN WORDEN DOOR ENIG PERSOON VOOR ENIGE DIRECTE, " +"INDIRECTE, SPECIALE, INCIDENTELE, OF GEVOLG SCHADE IN ELKE VORM INCLUSIEF, " +"ZONDER BEPERKING, SCHADE DOOR VERLIES VAN GOEDE WIL, WERK ONDERBREKING, " +"COMPUTER FALEN OF STORING, OF ENIGE ANDERE VORM VAN SCHADE OF VERLIES ALS " +"GEVOLGEN VAN HET GEBRUIKT VAN HET DOCUMENT EN DE AANGEPASTE VERSIES VAN HET " +"DOCUMENT, ZELFS ALS ZO EEN PARTIJ GEÏNFORMEERD ZOU ZIJN OVER DE MOGELIJKHEID" +" VAN ZULKE SCHADES." #. (itstool) path: legalnotice/para #: C/legal.xml:28 diff --git a/help/nn/nn.po b/help/nn/nn.po index 5da7298..9d315a3 100644 --- a/help/nn/nn.po +++ b/help/nn/nn.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Andrew Rabbitt <[email protected]>, 2020\n" "Language-Team: Norwegian Nynorsk (https://www.transifex.com/mate/teams/13566/nn/)\n" @@ -598,9 +598,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -923,10 +924,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/oc/oc.po b/help/oc/oc.po index afacd1d..494bd49 100644 --- a/help/oc/oc.po +++ b/help/oc/oc.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Quentin PAGÈS, 2021\n" "Language-Team: Occitan (post 1500) (https://www.transifex.com/mate/teams/13566/oc/)\n" @@ -613,9 +613,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -942,10 +943,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/or/or.po b/help/or/or.po index 01cffa6..a412572 100644 --- a/help/or/or.po +++ b/help/or/or.po @@ -5,10 +5,10 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" -"Language-Team: Oriya (https://www.transifex.com/mate/teams/13566/or/)\n" +"Language-Team: Odia (https://www.transifex.com/mate/teams/13566/or/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/pa/pa.po b/help/pa/pa.po index deddc48..51ccb97 100644 --- a/help/pa/pa.po +++ b/help/pa/pa.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Wolfgang Ulbrich <[email protected]>, 2018\n" "Language-Team: Panjabi (Punjabi) (https://www.transifex.com/mate/teams/13566/pa/)\n" @@ -599,9 +599,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -924,10 +925,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/pl/pl.po b/help/pl/pl.po index 9781702..84f070f 100644 --- a/help/pl/pl.po +++ b/help/pl/pl.po @@ -11,7 +11,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Daniel Tokarzewski <[email protected]>, 2021\n" "Language-Team: Polish (https://www.transifex.com/mate/teams/13566/pl/)\n" @@ -604,9 +604,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -929,10 +930,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ps/ps.po b/help/ps/ps.po index 5cd5f2f..bcb78f9 100644 --- a/help/ps/ps.po +++ b/help/ps/ps.po @@ -5,10 +5,10 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" -"Language-Team: Pushto (https://www.transifex.com/mate/teams/13566/ps/)\n" +"Language-Team: Pashto (https://www.transifex.com/mate/teams/13566/ps/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" @@ -596,9 +596,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -921,10 +922,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/pt/pt.po b/help/pt/pt.po index 141275f..ee2e1dd 100644 --- a/help/pt/pt.po +++ b/help/pt/pt.po @@ -11,7 +11,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Hugo Carvalho <[email protected]>, 2020\n" "Language-Team: Portuguese (https://www.transifex.com/mate/teams/13566/pt/)\n" @@ -19,7 +19,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: pt\n" -"Plural-Forms: nplurals=2; plural=(n != 1);\n" +"Plural-Forms: nplurals=3; plural=(n == 0 || n == 1) ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n" #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2 msgctxt "_" @@ -621,9 +621,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -952,10 +953,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/pt_BR/pt_BR.po b/help/pt_BR/pt_BR.po index 2b7ee04..e6d35c4 100644 --- a/help/pt_BR/pt_BR.po +++ b/help/pt_BR/pt_BR.po @@ -15,7 +15,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: gustavo s, 2020\n" "Language-Team: Portuguese (Brazil) (https://www.transifex.com/mate/teams/13566/pt_BR/)\n" @@ -23,7 +23,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: pt_BR\n" -"Plural-Forms: nplurals=2; plural=(n > 1);\n" +"Plural-Forms: nplurals=3; plural=(n == 0 || n == 1) ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n" #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2 msgctxt "_" @@ -649,9 +649,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -980,10 +981,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ro/ro.po b/help/ro/ro.po index cf07fb0..b54b7a2 100644 --- a/help/ro/ro.po +++ b/help/ro/ro.po @@ -2,13 +2,14 @@ # Translators: # Stefano Karapetsas <[email protected]>, 2018 # Daniel <[email protected]>, 2018 +# sidro <[email protected]>, 2021 # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" -"Last-Translator: Daniel <[email protected]>, 2018\n" +"Last-Translator: sidro <[email protected]>, 2021\n" "Language-Team: Romanian (https://www.transifex.com/mate/teams/13566/ro/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -48,7 +49,7 @@ msgstr "" #. (itstool) path: publisher/publishername #: C/index.docbook:52 msgid "MATE Documentation Team" -msgstr "" +msgstr "Echipa de documentare MATE" #. (itstool) path: publisher/publishername #. (itstool) path: revdescription/para @@ -595,9 +596,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -920,10 +922,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ru/ru.po b/help/ru/ru.po index 6aece1f..1085da4 100644 --- a/help/ru/ru.po +++ b/help/ru/ru.po @@ -5,15 +5,17 @@ # AlexL <[email protected]>, 2018 # Wolfgang Ulbrich <[email protected]>, 2018 # Михаил Ильинский <[email protected]>, 2018 -# Alex Putz, 2018 +# Alex Puts, 2018 # Иван Л. <[email protected]>, 2021 +# Павел Коваленко, 2021 +# Ser82, 2022 # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" -"Last-Translator: Иван Л. <[email protected]>, 2021\n" +"Last-Translator: Ser82, 2022\n" "Language-Team: Russian (https://www.transifex.com/mate/teams/13566/ru/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -77,7 +79,7 @@ msgstr "" #. (itstool) path: articleinfo/copyright #: C/index.docbook:30 msgid "<year>2015-2021</year> <holder>MATE Documentation Team</holder>" -msgstr "" +msgstr "<year>2015-2021</year> <holder>Команда документации MATE</holder>" #. (itstool) path: articleinfo/copyright #: C/index.docbook:34 @@ -161,8 +163,8 @@ msgid "" "<secondary>Manual</secondary> <tertiary>mate-power-manager</tertiary>" msgstr "" "<primary><application>Менеджер Питания " -"MATE</application></primary><secondary>Инструкция</secondary><tertiary" -">менеджер-питания-mate</tertiary>" +"MATE</application></primary><secondary>Инструкция</secondary><tertiary>менеджер-" +"питания-mate</tertiary>" #. (itstool) path: section/para #: C/index.docbook:135 @@ -195,11 +197,13 @@ msgid "" "Type <command>G_MESSAGES_DEBUG=PowerManager mate-power-manager --no-" "daemon</command>, then press <keycap>Return</keycap>:" msgstr "" +"Наберите <command>G_MESSAGES_DEBUG=PowerManager mate-power-manager --no-" +"daemon</command> и нажмите <keycap>Enter</keycap>:" #. (itstool) path: section/title #: C/index.docbook:162 msgid "Notification Messages" -msgstr "" +msgstr "Уведомления" #. (itstool) path: section/para #: C/index.docbook:163 @@ -207,16 +211,19 @@ msgid "" "When <application>MATE Power Manager</application> has started, the " "following notifications may be displayed." msgstr "" +"При запуске <application>Менеджера питания MATE</application> могут " +"отображаться нижеуказанные уведомления." #. (itstool) path: section/title #: C/index.docbook:168 msgid "AC Adapter Unplugged" -msgstr "" +msgstr "Адаптер переменного тока отключен" #. (itstool) path: figure/title #: C/index.docbook:170 msgid "MATE Power Manager Notification when AC adapter is removed" msgstr "" +"Уведомление Менеджера питания MATE при отключении адаптера переменного тока" #. (itstool) path: imageobject/imagedata #. This is a reference to an external file such as an image or video. When @@ -236,11 +243,13 @@ msgid "" "You can disable this notification by changing the dconf key " "<command>org.mate.power-manager notify-discharging</command>." msgstr "" +"Вы можете отключить это уведомление, изменив ключ dconf " +"<command>org.mate.power-manager notify-discharging</command>." #. (itstool) path: section/title #: C/index.docbook:188 msgid "Fully Charged" -msgstr "" +msgstr "Полностью заряжено" #. (itstool) path: figure/title #: C/index.docbook:190 @@ -572,7 +581,7 @@ msgstr "" #. (itstool) path: section/title #: C/index.docbook:434 msgid "General Preferences" -msgstr "" +msgstr "Общие параметры" #. (itstool) path: figure/title #: C/index.docbook:436 @@ -642,9 +651,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -967,10 +977,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/si/si.po b/help/si/si.po index 254d7f5..63525ab 100644 --- a/help/si/si.po +++ b/help/si/si.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Sinhala (https://www.transifex.com/mate/teams/13566/si/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/sk/sk.po b/help/sk/sk.po index f2060fd..1d3b7b9 100644 --- a/help/sk/sk.po +++ b/help/sk/sk.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Ján Ďanovský <[email protected]>, 2020\n" "Language-Team: Slovak (https://www.transifex.com/mate/teams/13566/sk/)\n" @@ -602,9 +602,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -927,10 +928,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/sl/sl.po b/help/sl/sl.po index f1a6169..dfb208f 100644 --- a/help/sl/sl.po +++ b/help/sl/sl.po @@ -3,13 +3,13 @@ # Stefano Karapetsas <[email protected]>, 2018 # Helena S <[email protected]>, 2018 # jetomit <[email protected]>, 2018 -# Damir Mevkić <[email protected]>, 2019 +# Damir Mevkić 52K <[email protected]>, 2019 # Arnold Marko <[email protected]>, 2019 # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Arnold Marko <[email protected]>, 2019\n" "Language-Team: Slovenian (https://www.transifex.com/mate/teams/13566/sl/)\n" @@ -598,9 +598,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -923,10 +924,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/sq/sq.po b/help/sq/sq.po index 43dc0a6..bcd8413 100644 --- a/help/sq/sq.po +++ b/help/sq/sq.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Ardit Dani <[email protected]>, 2021\n" "Language-Team: Albanian (https://www.transifex.com/mate/teams/13566/sq/)\n" @@ -601,9 +601,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -926,10 +927,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/sr/sr.po b/help/sr/sr.po index 7776c80..13eff21 100644 --- a/help/sr/sr.po +++ b/help/sr/sr.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Мирослав Николић <[email protected]>, 2021\n" "Language-Team: Serbian (https://www.transifex.com/mate/teams/13566/sr/)\n" @@ -716,9 +716,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" "Да појаснимо, клизачи у „<command>mate-power-preferences</command>“ су " "постављени да започну на вредности „истек времена сесије + 1“ минут, јер не " @@ -1129,10 +1130,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" "И проверите процес „<command>hald-addon-acpi</command>“. Ако није покренут, " "тада се уверите да HAL ради са опцијом „<command>--retain-" diff --git a/help/sr@latin/[email protected] b/help/sr@latin/[email protected] index 8beff41..359fe49 100644 --- a/help/sr@latin/[email protected] +++ b/help/sr@latin/[email protected] @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Ivan Pejić <[email protected]>, 2018\n" "Language-Team: Serbian (Latin) (https://www.transifex.com/mate/teams/13566/sr@latin/)\n" @@ -598,9 +598,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -923,10 +924,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/sv/sv.po b/help/sv/sv.po index c0657a3..334aba0 100644 --- a/help/sv/sv.po +++ b/help/sv/sv.po @@ -11,7 +11,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Kristoffer Grundström <[email protected]>, 2021\n" "Language-Team: Swedish (https://www.transifex.com/mate/teams/13566/sv/)\n" @@ -620,9 +620,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -951,10 +952,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ta/ta.po b/help/ta/ta.po index 71a4f3d..00ba8eb 100644 --- a/help/ta/ta.po +++ b/help/ta/ta.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Mooglie <[email protected]>, 2018\n" "Language-Team: Tamil (https://www.transifex.com/mate/teams/13566/ta/)\n" @@ -598,9 +598,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -923,10 +924,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/te/te.po b/help/te/te.po index dd23ef4..ed5a3da 100644 --- a/help/te/te.po +++ b/help/te/te.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Telugu (https://www.transifex.com/mate/teams/13566/te/)\n" @@ -595,9 +595,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -920,10 +921,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/th/th.po b/help/th/th.po index 12816a8..913e485 100644 --- a/help/th/th.po +++ b/help/th/th.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Akom <[email protected]>, 2018\n" "Language-Team: Thai (https://www.transifex.com/mate/teams/13566/th/)\n" @@ -596,9 +596,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -921,10 +922,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/tr/tr.po b/help/tr/tr.po index fa955c0..8649d0b 100644 --- a/help/tr/tr.po +++ b/help/tr/tr.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: 0d1bdb3b9a0d4e8f77bc854af8bf3dfc_e6913f4, 2019\n" "Language-Team: Turkish (https://www.transifex.com/mate/teams/13566/tr/)\n" @@ -607,9 +607,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -932,10 +933,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ug/ug.po b/help/ug/ug.po index 9703c3f..5d91475 100644 --- a/help/ug/ug.po +++ b/help/ug/ug.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Uyghur (https://www.transifex.com/mate/teams/13566/ug/)\n" @@ -603,9 +603,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -928,10 +929,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/uk/uk.po b/help/uk/uk.po index 4d5ba1f..839b6c7 100644 --- a/help/uk/uk.po +++ b/help/uk/uk.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Микола Ткач <[email protected]>, 2021\n" "Language-Team: Ukrainian (https://www.transifex.com/mate/teams/13566/uk/)\n" @@ -626,9 +626,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -973,10 +974,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/ur/ur.po b/help/ur/ur.po index e324f48..5847f77 100644 --- a/help/ur/ur.po +++ b/help/ur/ur.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: mauron, 2018\n" "Language-Team: Urdu (https://www.transifex.com/mate/teams/13566/ur/)\n" @@ -600,9 +600,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -925,10 +926,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/uz/uz.po b/help/uz/uz.po index ace79c1..09170de 100644 --- a/help/uz/uz.po +++ b/help/uz/uz.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Muzaffar Habibullayev <[email protected]>, 2018\n" "Language-Team: Uzbek (https://www.transifex.com/mate/teams/13566/uz/)\n" @@ -595,9 +595,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -920,10 +921,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/vi/vi.po b/help/vi/vi.po index e1459d5..581e63a 100644 --- a/help/vi/vi.po +++ b/help/vi/vi.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Horazone Detex <[email protected]>, 2018\n" "Language-Team: Vietnamese (https://www.transifex.com/mate/teams/13566/vi/)\n" @@ -596,9 +596,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -921,10 +922,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/wa/wa.po b/help/wa/wa.po index 06a5547..896fecd 100644 --- a/help/wa/wa.po +++ b/help/wa/wa.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Walloon (https://www.transifex.com/mate/teams/13566/wa/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/xh/xh.po b/help/xh/xh.po index 8a8754b..63829ee 100644 --- a/help/xh/xh.po +++ b/help/xh/xh.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Xhosa (https://www.transifex.com/mate/teams/13566/xh/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/yo/yo.po b/help/yo/yo.po index bd44d98..ec23db4 100644 --- a/help/yo/yo.po +++ b/help/yo/yo.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n" "Language-Team: Yoruba (https://www.transifex.com/mate/teams/13566/yo/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/zh-Hans/zh-Hans.po b/help/zh-Hans/zh-Hans.po index e5ecb0c..153a260 100644 --- a/help/zh-Hans/zh-Hans.po +++ b/help/zh-Hans/zh-Hans.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: Xiaoyuan Chen <[email protected]>, 2018\n" "Language-Team: Chinese Simplified (https://www.transifex.com/mate/teams/13566/zh-Hans/)\n" @@ -594,9 +594,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -919,10 +920,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/zh_CN/zh_CN.po b/help/zh_CN/zh_CN.po index d41b238..871d08a 100644 --- a/help/zh_CN/zh_CN.po +++ b/help/zh_CN/zh_CN.po @@ -6,13 +6,14 @@ # Wolfgang Ulbrich <[email protected]>, 2018 # biqiu-ssw <[email protected]>, 2018 # CNAmira <[email protected]>, 2018 +# copi143 <[email protected]>, 2022 # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" -"Last-Translator: CNAmira <[email protected]>, 2018\n" +"Last-Translator: copi143 <[email protected]>, 2022\n" "Language-Team: Chinese (China) (https://www.transifex.com/mate/teams/13566/zh_CN/)\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -47,12 +48,12 @@ msgid "" "<application>MATE Power Manager</application> is a session daemon for the " "MATE Desktop that manages the power settings for your laptop or desktop " "computer." -msgstr "" +msgstr "<application></application>是 MATE Desktop 的会话守护进程，用于管理笔记本电脑或台式机的电源设置。" #. (itstool) path: articleinfo/copyright #: C/index.docbook:30 msgid "<year>2015-2021</year> <holder>MATE Documentation Team</holder>" -msgstr "" +msgstr "<year>2015-2021</year>MATE 文档团队" #. (itstool) path: articleinfo/copyright #: C/index.docbook:34 @@ -118,7 +119,7 @@ msgstr "" #. (itstool) path: article/indexterm #: C/index.docbook:118 msgid "<primary>mate-power-manager</primary>" -msgstr "" +msgstr "<primary>MATE 电源管理</primary>" #. (itstool) path: section/title #: C/index.docbook:125 @@ -131,13 +132,16 @@ msgid "" "<primary><application>MATE Power Manager</application></primary> " "<secondary>Manual</secondary> <tertiary>mate-power-manager</tertiary>" msgstr "" +"<primary><application>MATE " +"电源管理器</application></primary><secondary>手动</secondary><tertiary>mate-" +"电源管理器</tertiary>" #. (itstool) path: section/para #: C/index.docbook:135 msgid "" "The MATE Power Manager session daemon is a power management daemon for the " "<systemitem>MATE desktop</systemitem>" -msgstr "" +msgstr "MATE 电源管理器 会话守护进程是一个电源管理守护进程，用于<systemitem>MATE desktop</systemitem>" #. (itstool) path: section/title #: C/index.docbook:143 @@ -247,14 +251,14 @@ msgstr "" #. (itstool) path: section/title #: C/index.docbook:216 msgid "Power Low" -msgstr "" +msgstr "低能耗" #. (itstool) path: section/para #: C/index.docbook:217 msgid "" "When the battery is low, you will receive the following notification. You " "should consider switching to AC power really soon." -msgstr "" +msgstr "当电池电量不足时，您将收到以下通知。 您应该尽快切换到交流电源。 " #. (itstool) path: figure/title #: C/index.docbook:222 @@ -282,7 +286,7 @@ msgstr "" #. (itstool) path: section/title #: C/index.docbook:240 msgid "Power Critical" -msgstr "" +msgstr "电量严重不足" #. (itstool) path: section/para #: C/index.docbook:241 @@ -290,7 +294,7 @@ msgid "" "When the computer has run out of power, it will show this notification " "explaining what action is required. You can change the critical low action " "using the preferences tool." -msgstr "" +msgstr "当计算机电量耗尽时，将显示此通知，说明需要采取什么措施。 您可以使用首选项工具更改电量严重不足时的操作。 " #. (itstool) path: figure/title #: C/index.docbook:247 @@ -313,7 +317,7 @@ msgstr "" #. (itstool) path: section/title #: C/index.docbook:259 msgid "Suspend Failure" -msgstr "" +msgstr "挂起失败" #. (itstool) path: section/para #: C/index.docbook:260 @@ -610,9 +614,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -935,10 +940,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/zh_HK/zh_HK.po b/help/zh_HK/zh_HK.po index 638768f..73cac15 100644 --- a/help/zh_HK/zh_HK.po +++ b/help/zh_HK/zh_HK.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: tomoe_musashi <[email protected]>, 2018\n" "Language-Team: Chinese (Hong Kong) (https://www.transifex.com/mate/teams/13566/zh_HK/)\n" @@ -598,9 +598,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -923,10 +924,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink diff --git a/help/zh_TW/zh_TW.po b/help/zh_TW/zh_TW.po index 478d70c..bb99bba 100644 --- a/help/zh_TW/zh_TW.po +++ b/help/zh_TW/zh_TW.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-01-16 14:35+0100\n" +"POT-Creation-Date: 2022-10-29 15:32+0200\n" "PO-Revision-Date: 2018-10-04 15:52+0000\n" "Last-Translator: 黃柏諺 <[email protected]>, 2019\n" "Language-Team: Chinese (Taiwan) (https://www.transifex.com/mate/teams/13566/zh_TW/)\n" @@ -604,9 +604,10 @@ msgid "" "To make this clearer, the sliders in <command>mate-power-" "preferences</command> are set to start at the value of the session-timeout +" " 1 minute, as we cannot logically trigger before the session is marked as " -"idle. If you adjust the value of the 'session idle' timeout in <command" -">mate-screensaver-preferences</command> then the start of the sliders in " -"<command>mate-power-preferences</command> will change accordingly." +"idle. If you adjust the value of the 'session idle' timeout in " +"<command>mate-screensaver-preferences</command> then the start of the " +"sliders in <command>mate-power-preferences</command> will change " +"accordingly." msgstr "" #. (itstool) path: section/title @@ -929,10 +930,10 @@ msgstr "" #: C/index.docbook:747 msgid "" "And check for the process <command>hald-addon-acpi</command>. If it is not " -"being run, then please make sure that HAL is being run with the <command" -">--retain-privileges</command> option in the <command>haldaemon</command> " -"initscript. An alternative to this is to use acpid, rather than the kernel " -"proc file." +"being run, then please make sure that HAL is being run with the " +"<command>--retain-privileges</command> option in the " +"<command>haldaemon</command> initscript. An alternative to this is to use " +"acpid, rather than the kernel proc file." msgstr "" #. (itstool) path: para/ulink |