tx: sync with transifex

109 files changed, 1284 insertions, 1152 deletions

diff --git a/help/af/af.po b/help/af/af.po
index 3f44f56..6d933ca 100644
--- a/help/af/af.po
+++ b/help/af/af.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Afrikaans (https://www.transifex.com/mate/teams/13566/af/)\n"
@@ -597,9 +597,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -922,10 +923,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/am/am.po b/help/am/am.po
index 602a1cb..b8fde96 100644
--- a/help/am/am.po
+++ b/help/am/am.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: samson <[email protected]>, 2018\n"
 "Language-Team: Amharic (https://www.transifex.com/mate/teams/13566/am/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ar/ar.po b/help/ar/ar.po
index fa72521..2b0f039 100644
--- a/help/ar/ar.po
+++ b/help/ar/ar.po
@@ -4,13 +4,14 @@
 # Mosaab Alzoubi <[email protected]>, 2018
 # Wolfgang Ulbrich <[email protected]>, 2018
 # مهدي السطيفي <[email protected]>, 2018
+# Ahmd go <[email protected]>, 2021
 # 
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
-"Last-Translator: مهدي السطيفي <[email protected]>, 2018\n"
+"Last-Translator: Ahmd go <[email protected]>, 2021\n"
 "Language-Team: Arabic (https://www.transifex.com/mate/teams/13566/ar/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -52,7 +53,7 @@ msgstr ""
 #. (itstool) path: publisher/publishername
 #: C/index.docbook:52
 msgid "MATE Documentation Team"
-msgstr ""
+msgstr "فريق متّة التوثيقي "
 
 #. (itstool) path: publisher/publishername
 #. (itstool) path: revdescription/para
@@ -599,9 +600,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -924,10 +926,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/as/as.po b/help/as/as.po
index 33dbce7..b053056 100644
--- a/help/as/as.po
+++ b/help/as/as.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Assamese (https://www.transifex.com/mate/teams/13566/as/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ast/ast.po b/help/ast/ast.po
index 61deb49..bd03372 100644
--- a/help/ast/ast.po
+++ b/help/ast/ast.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Ḷḷumex03, 2018\n"
 "Language-Team: Asturian (https://www.transifex.com/mate/teams/13566/ast/)\n"
@@ -595,9 +595,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -920,10 +921,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/az/az.po b/help/az/az.po
index 7d67be0..8eefedc 100644
--- a/help/az/az.po
+++ b/help/az/az.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Azerbaijani (https://www.transifex.com/mate/teams/13566/az/)\n"
@@ -598,9 +598,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -923,10 +924,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/be/be.po b/help/be/be.po
index 19d2cc6..d2aabdb 100644
--- a/help/be/be.po
+++ b/help/be/be.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Mihail Varantsou <[email protected]>, 2018\n"
 "Language-Team: Belarusian (https://www.transifex.com/mate/teams/13566/be/)\n"
@@ -597,9 +597,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -922,10 +923,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/bg/bg.po b/help/bg/bg.po
index 9116d19..d447be8 100644
--- a/help/bg/bg.po
+++ b/help/bg/bg.po
@@ -9,7 +9,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: H Bozhkov, 2020\n"
 "Language-Team: Bulgarian (https://www.transifex.com/mate/teams/13566/bg/)\n"
@@ -606,9 +606,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -931,10 +932,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/bn/bn.po b/help/bn/bn.po
index c81171b..19f7e66 100644
--- a/help/bn/bn.po
+++ b/help/bn/bn.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Bengali (https://www.transifex.com/mate/teams/13566/bn/)\n"
@@ -599,9 +599,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -924,10 +925,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/bn_IN/bn_IN.po b/help/bn_IN/bn_IN.po
index 05b19c0..fa5e2a0 100644
--- a/help/bn_IN/bn_IN.po
+++ b/help/bn_IN/bn_IN.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: umesh agarwal <[email protected]>, 2018\n"
 "Language-Team: Bengali (India) (https://www.transifex.com/mate/teams/13566/bn_IN/)\n"
@@ -598,9 +598,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -923,10 +924,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/br/br.po b/help/br/br.po
index 11ee2e4..520e9d4 100644
--- a/help/br/br.po
+++ b/help/br/br.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Alan Monfort <[email protected]>, 2018\n"
 "Language-Team: Breton (https://www.transifex.com/mate/teams/13566/br/)\n"
@@ -595,9 +595,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -920,10 +921,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/bs/bs.po b/help/bs/bs.po
index 123d8c1..fc863f5 100644
--- a/help/bs/bs.po
+++ b/help/bs/bs.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Sky Lion <[email protected]>, 2018\n"
 "Language-Team: Bosnian (https://www.transifex.com/mate/teams/13566/bs/)\n"
@@ -595,9 +595,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -920,10 +921,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ca/ca.po b/help/ca/ca.po
index bce6bac..c10c99c 100644
--- a/help/ca/ca.po
+++ b/help/ca/ca.po
@@ -627,9 +627,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -958,10 +959,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ca@valencia/[email protected] b/help/ca@valencia/[email protected]
index a41e692..c3a8194 100644
--- a/help/ca@valencia/[email protected]
+++ b/help/ca@valencia/[email protected]
@@ -8,7 +8,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Empar Montoro <[email protected]>, 2018\n"
 "Language-Team: Catalan (Valencian) (https://www.transifex.com/mate/teams/13566/ca@valencia/)\n"
@@ -603,9 +603,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -928,10 +929,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/cmn/cmn.po b/help/cmn/cmn.po
index 35afc19..f09447c 100644
--- a/help/cmn/cmn.po
+++ b/help/cmn/cmn.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: 趙惟倫 <[email protected]>, 2018\n"
 "Language-Team: Chinese (Mandarin) (https://www.transifex.com/mate/teams/13566/cmn/)\n"
@@ -597,9 +597,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -922,10 +923,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/crh/crh.po b/help/crh/crh.po
index d4fc81d..eaf38cc 100644
--- a/help/crh/crh.po
+++ b/help/crh/crh.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Crimean Turkish (https://www.transifex.com/mate/teams/13566/crh/)\n"
@@ -596,9 +596,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -921,10 +922,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/cs/cs.po b/help/cs/cs.po
index 6670b89..145c968 100644
--- a/help/cs/cs.po
+++ b/help/cs/cs.po
@@ -3,14 +3,14 @@
 # Stefano Karapetsas <[email protected]>, 2018
 # ToMáš Marný, 2018
 # Wolfgang Ulbrich <[email protected]>, 2018
-# LiberteCzech <[email protected]>, 2018
+# LiberteCzech <[email protected]>, 2018
 # Pavel Borecki <[email protected]>, 2020
 # Lukáš Lommer <[email protected]>, 2021
 # 
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Lukáš Lommer <[email protected]>, 2021\n"
 "Language-Team: Czech (https://www.transifex.com/mate/teams/13566/cs/)\n"
@@ -610,9 +610,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -935,10 +936,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/cy/cy.po b/help/cy/cy.po
index 67b69ab..d19a6cf 100644
--- a/help/cy/cy.po
+++ b/help/cy/cy.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: ciaran, 2018\n"
 "Language-Team: Welsh (https://www.transifex.com/mate/teams/13566/cy/)\n"
@@ -597,9 +597,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -922,10 +923,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/da/da.po b/help/da/da.po
index 3fe0c77..a31565f 100644
--- a/help/da/da.po
+++ b/help/da/da.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Joe Hansen <[email protected]>, 2021\n"
 "Language-Team: Danish (https://www.transifex.com/mate/teams/13566/da/)\n"
@@ -20,10 +20,10 @@ msgstr ""
 msgctxt "_"
 msgid "translator-credits"
 msgstr ""
-"\"Joe Hansen, 2012, 2013, 2014, 2015, 2016, 2017, 2018.\\n\"\n"
-"\"\\n\"\n"
-"\"Dansk-gruppen <[email protected]>\\n\"\n"
-"\"Mere info: http://www.dansk-gruppen.dk\""
+"Joe Hansen 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021.\n"
+"\n"
+"Dansk-gruppen <[email protected]>\n"
+"Mere info: http://www.dansk-gruppen.dk"
 
 #. (itstool) path: articleinfo/title
 #: C/index.docbook:23
@@ -255,8 +255,8 @@ msgid ""
 "You can disable this notification by changing the dconf key "
 "<command>org.mate.power-manager notify-fully-charged</command>."
 msgstr ""
-"Du kan ændre denne påmindelse ved at ændre dconf-nøglen  <command>org.mate"
-".power-manager notify-fully-charged</command>."
+"Du kan ændre denne påmindelse ved at ændre dconf-nøglen  "
+"<command>org.mate.power-manager notify-fully-charged</command>."
 
 #. (itstool) path: note/para
 #: C/index.docbook:206
@@ -666,9 +666,10 @@ msgstr ""
 "brugerindtastning, og hvis musen ikke har bevæget sig eller tastaturet er "
 "anvendt startes et tidsudløb. Når værdien af dette tidsudløb når værdien "
 "angivet i <command>mate-screensaver-preferences</command>, så markeres det "
-"aktuelle logind som »session ledig«. På dette tidspunkt udfører <application"
-">MATE-strømhåndtering</application> alle sessionens handlinger såsom "
-"aktivering af lav strøm-tilstand og sænkning af den bærbares panellysstyrke."
+"aktuelle logind som »session ledig«. På dette tidspunkt udfører "
+"<application>MATE-strømhåndtering</application> alle sessionens handlinger "
+"såsom aktivering af lav strøm-tilstand og sænkning af den bærbares "
+"panellysstyrke."
 
 #. (itstool) path: figure/title
 #: C/index.docbook:461
@@ -712,16 +713,17 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 "For at gøre det tydligere, skyderne i <command>mate-power-"
 "preferences</command> er angivet til at starte ved værdien for session-"
 "timeout + 1 minut, da vi logisk ikke kan udløse før sessionen er markeret "
-"som ledig. Hvis du justerer værdien for sessions-idle-tidsudløbet i <command"
-">mate-screensaver-preferences</command> så vil starten af skyderne i "
-"<command>mate-power-preferences</command> ændre sig tilsvarende."
+"som ledig. Hvis du justerer værdien for sessions-idle-tidsudløbet i "
+"<command>mate-screensaver-preferences</command> så vil starten af skyderne i"
+" <command>mate-power-preferences</command> ændre sig tilsvarende."
 
 #. (itstool) path: section/title
 #: C/index.docbook:491
@@ -1124,10 +1126,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 "Og kontroller for processen <command>hald-addon-acpi</command>. Hvis den "
 "ikke afvikles, så sikr dig at HAL afvikles med tilvalget <command>--retain-"
diff --git a/help/de/de.po b/help/de/de.po
index 791ecb8..8488615 100644
--- a/help/de/de.po
+++ b/help/de/de.po
@@ -10,7 +10,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Ettore Atalan <[email protected]>, 2019\n"
 "Language-Team: German (https://www.transifex.com/mate/teams/13566/de/)\n"
@@ -607,9 +607,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -932,10 +933,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/dz/dz.po b/help/dz/dz.po
index 4153883..75bb9f4 100644
--- a/help/dz/dz.po
+++ b/help/dz/dz.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Dzongkha (https://www.transifex.com/mate/teams/13566/dz/)\n"
@@ -597,9 +597,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -922,10 +923,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/el/el.po b/help/el/el.po
index 0a96867..ecfe504 100644
--- a/help/el/el.po
+++ b/help/el/el.po
@@ -9,7 +9,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: TheDimitris15, 2019\n"
 "Language-Team: Greek (https://www.transifex.com/mate/teams/13566/el/)\n"
@@ -602,9 +602,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -927,10 +928,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/en_AU/en_AU.po b/help/en_AU/en_AU.po
index 53d7778..524bca7 100644
--- a/help/en_AU/en_AU.po
+++ b/help/en_AU/en_AU.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Michael Findlay <[email protected]>, 2018\n"
 "Language-Team: English (Australia) (https://www.transifex.com/mate/teams/13566/en_AU/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/en_CA/en_CA.po b/help/en_CA/en_CA.po
index 4c6da12..cb8dc8b 100644
--- a/help/en_CA/en_CA.po
+++ b/help/en_CA/en_CA.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: English (Canada) (https://www.transifex.com/mate/teams/13566/en_CA/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/en_GB/en_GB.po b/help/en_GB/en_GB.po
index 878a028..b1894bb 100644
--- a/help/en_GB/en_GB.po
+++ b/help/en_GB/en_GB.po
@@ -596,9 +596,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -921,10 +922,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/eo/eo.po b/help/eo/eo.po
index cfeda32..233c3d4 100644
--- a/help/eo/eo.po
+++ b/help/eo/eo.po
@@ -8,7 +8,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Cora Loftis, 2018\n"
 "Language-Team: Esperanto (https://www.transifex.com/mate/teams/13566/eo/)\n"
@@ -605,9 +605,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -930,10 +931,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/es/es.po b/help/es/es.po
index a7c8468..4344f6a 100644
--- a/help/es/es.po
+++ b/help/es/es.po
@@ -10,7 +10,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Toni Estévez <[email protected]>, 2021\n"
 "Language-Team: Spanish (https://www.transifex.com/mate/teams/13566/es/)\n"
@@ -18,7 +18,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Language: es\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n"
 
 #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2
 msgctxt "_"
@@ -618,8 +618,8 @@ msgstr ""
 "Tan pronto como la sesión está marcada como inactiva, el <application>Gestor"
 " de energía de MATE</application> inicia su propio temporizador del sistema."
 " Cuando se alcanza el tiempo de espera configurado en <command>mate-power-"
-"preferences</command> y la carga de la CPU está inactiva, se ejecuta la "
-"acción de reposo, que normalmente consiste en apagar la pantalla o en "
+"preferences</command> y la carga del procesador está inactiva, se ejecuta la"
+" acción de reposo, que normalmente consiste en apagar la pantalla o en "
 "suspender o hibernar el sistema."
 
 #. (itstool) path: section/para
@@ -628,9 +628,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -959,10 +960,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
@@ -1009,9 +1010,9 @@ msgid ""
 "aware of those trademarks, then the names are in capital letters or initial "
 "capital letters."
 msgstr ""
-"Muchos de los nombres utilizados por las empresas para distinguir sus "
-"productos y servicios se consideran marcas comerciales. Cuando esos nombres "
-"aparecen en cualquier documentación de MATE y los miembros del proyecto de "
+"Muchos de los nombres usados por las empresas para distinguir sus productos "
+"y servicios se consideran marcas comerciales. Cuando esos nombres aparecen "
+"en cualquier documentación de MATE y los miembros del proyecto de "
 "documentación de MATE son conscientes de que se trata de marcas registradas,"
 " dichos nombres se escriben en letras mayúsculas o con inical mayúscula."
 
diff --git a/help/es_AR/es_AR.po b/help/es_AR/es_AR.po
index 7ae620e..ff8603b 100644
--- a/help/es_AR/es_AR.po
+++ b/help/es_AR/es_AR.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Reshi Starkey <[email protected]>, 2018\n"
 "Language-Team: Spanish (Argentina) (https://www.transifex.com/mate/teams/13566/es_AR/)\n"
@@ -14,7 +14,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Language: es_AR\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n"
 
 #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2
 msgctxt "_"
@@ -597,9 +597,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -922,10 +923,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/es_CL/es_CL.po b/help/es_CL/es_CL.po
index ecc507c..87a11bd 100644
--- a/help/es_CL/es_CL.po
+++ b/help/es_CL/es_CL.po
@@ -1,14 +1,14 @@
 # 
 # Translators:
 # Stefano Karapetsas <[email protected]>, 2018
-# prflr88 <[email protected]>, 2018
+# Pablo Lezaeta Reyes <[email protected]>, 2018
 # Alejo_K <[email protected]>, 2018
 # Robert Petitpas <[email protected]>, 2018
 # 
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Robert Petitpas <[email protected]>, 2018\n"
 "Language-Team: Spanish (Chile) (https://www.transifex.com/mate/teams/13566/es_CL/)\n"
@@ -16,7 +16,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Language: es_CL\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n"
 
 #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2
 msgctxt "_"
@@ -597,9 +597,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -922,10 +923,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/es_CO/es_CO.po b/help/es_CO/es_CO.po
index 5fb97e4..1f9a00f 100644
--- a/help/es_CO/es_CO.po
+++ b/help/es_CO/es_CO.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Julian Borrero <[email protected]>, 2018\n"
 "Language-Team: Spanish (Colombia) (https://www.transifex.com/mate/teams/13566/es_CO/)\n"
@@ -15,7 +15,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Language: es_CO\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n"
 
 #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2
 msgctxt "_"
@@ -596,9 +596,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -921,10 +922,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/es_ES/es_ES.po b/help/es_ES/es_ES.po
index b49544b..e0dbbfe 100644
--- a/help/es_ES/es_ES.po
+++ b/help/es_ES/es_ES.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Jose11091 <[email protected]>, 2018\n"
 "Language-Team: Spanish (Spain) (https://www.transifex.com/mate/teams/13566/es_ES/)\n"
@@ -14,7 +14,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Language: es_ES\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n"
 
 #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2
 msgctxt "_"
@@ -597,9 +597,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -922,10 +923,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/es_MX/es_MX.po b/help/es_MX/es_MX.po
index 59ed05e..b4b6964 100644
--- a/help/es_MX/es_MX.po
+++ b/help/es_MX/es_MX.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Luis Armando Medina <[email protected]>, 2018\n"
 "Language-Team: Spanish (Mexico) (https://www.transifex.com/mate/teams/13566/es_MX/)\n"
@@ -15,7 +15,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Language: es_MX\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n"
 
 #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2
 msgctxt "_"
@@ -603,9 +603,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -928,10 +929,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/es_PR/es_PR.po b/help/es_PR/es_PR.po
index abb68f5..bc8e5c2 100644
--- a/help/es_PR/es_PR.po
+++ b/help/es_PR/es_PR.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Neverest <[email protected]>, 2018\n"
 "Language-Team: Spanish (Puerto Rico) (https://www.transifex.com/mate/teams/13566/es_PR/)\n"
@@ -14,7 +14,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Language: es_PR\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n"
 
 #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2
 msgctxt "_"
@@ -597,9 +597,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -922,10 +923,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/et/et.po b/help/et/et.po
index 8381564..d97c648 100644
--- a/help/et/et.po
+++ b/help/et/et.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Mattias Põldaru <[email protected]>, 2019\n"
 "Language-Team: Estonian (https://www.transifex.com/mate/teams/13566/et/)\n"
@@ -601,9 +601,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -926,10 +927,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/eu/eu.po b/help/eu/eu.po
index 739fd30..22cf049 100644
--- a/help/eu/eu.po
+++ b/help/eu/eu.po
@@ -8,7 +8,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Alexander Gabilondo <[email protected]>, 2020\n"
 "Language-Team: Basque (https://www.transifex.com/mate/teams/13566/eu/)\n"
@@ -599,9 +599,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -924,10 +925,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/fa/fa.po b/help/fa/fa.po
index 2d1989d..3bf029b 100644
--- a/help/fa/fa.po
+++ b/help/fa/fa.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Mahdi Pourghasem <[email protected]>, 2018\n"
 "Language-Team: Persian (https://www.transifex.com/mate/teams/13566/fa/)\n"
@@ -596,9 +596,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -921,10 +922,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/fi/fi.po b/help/fi/fi.po
index 7645758..2e96d02 100644
--- a/help/fi/fi.po
+++ b/help/fi/fi.po
@@ -9,7 +9,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Kimmo Kujansuu <[email protected]>, 2019\n"
 "Language-Team: Finnish (https://www.transifex.com/mate/teams/13566/fi/)\n"
@@ -603,9 +603,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -928,10 +929,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/fr/fr.po b/help/fr/fr.po
index 220c0c7..f964f6e 100644
--- a/help/fr/fr.po
+++ b/help/fr/fr.po
@@ -11,7 +11,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Tubuntu, 2020\n"
 "Language-Team: French (https://www.transifex.com/mate/teams/13566/fr/)\n"
@@ -19,7 +19,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Language: fr\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Plural-Forms: nplurals=3; plural=(n == 0 || n == 1) ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n"
 
 #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2
 msgctxt "_"
@@ -614,9 +614,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -939,10 +940,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/fur/fur.po b/help/fur/fur.po
index dcd326b..3740258 100644
--- a/help/fur/fur.po
+++ b/help/fur/fur.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Friulian (https://www.transifex.com/mate/teams/13566/fur/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/fy/fy.po b/help/fy/fy.po
index e0d4f6b..1cc2afd 100644
--- a/help/fy/fy.po
+++ b/help/fy/fy.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Western Frisian (https://www.transifex.com/mate/teams/13566/fy/)\n"
@@ -597,9 +597,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -922,10 +923,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ga/ga.po b/help/ga/ga.po
index afc8804..225ae4c 100644
--- a/help/ga/ga.po
+++ b/help/ga/ga.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Irish (https://www.transifex.com/mate/teams/13566/ga/)\n"
@@ -597,9 +597,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -922,10 +923,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/gl/gl.po b/help/gl/gl.po
index 8ea6bea..5567f15 100644
--- a/help/gl/gl.po
+++ b/help/gl/gl.po
@@ -8,7 +8,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Miguel Anxo Bouzada <[email protected]>, 2019\n"
 "Language-Team: Galician (https://www.transifex.com/mate/teams/13566/gl/)\n"
@@ -617,9 +617,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -948,10 +949,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/gu/gu.po b/help/gu/gu.po
index 8c99636..95a8d90 100644
--- a/help/gu/gu.po
+++ b/help/gu/gu.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Milan Savaliya <[email protected]>, 2018\n"
 "Language-Team: Gujarati (https://www.transifex.com/mate/teams/13566/gu/)\n"
@@ -595,9 +595,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -920,10 +921,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ha/ha.po b/help/ha/ha.po
index e09ae46..40fbc28 100644
--- a/help/ha/ha.po
+++ b/help/ha/ha.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Hausa (https://www.transifex.com/mate/teams/13566/ha/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/he/he.po b/help/he/he.po
index 37c8cbe..9127078 100644
--- a/help/he/he.po
+++ b/help/he/he.po
@@ -9,7 +9,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Omer I.S. <[email protected]>, 2020\n"
 "Language-Team: Hebrew (https://www.transifex.com/mate/teams/13566/he/)\n"
@@ -598,9 +598,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -923,10 +924,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/hi/hi.po b/help/hi/hi.po
index a4e2726..b7e5c63 100644
--- a/help/hi/hi.po
+++ b/help/hi/hi.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Sadgamaya <[email protected]>, 2018\n"
 "Language-Team: Hindi (https://www.transifex.com/mate/teams/13566/hi/)\n"
@@ -599,9 +599,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -924,10 +925,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/hr/hr.po b/help/hr/hr.po
index a110409..e2ef7d2 100644
--- a/help/hr/hr.po
+++ b/help/hr/hr.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Radovan Gundulić <[email protected]>, 2020\n"
 "Language-Team: Croatian (https://www.transifex.com/mate/teams/13566/hr/)\n"
@@ -619,9 +619,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -944,10 +945,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/hu/hu.po b/help/hu/hu.po
index ccb7f35..a5df596 100644
--- a/help/hu/hu.po
+++ b/help/hu/hu.po
@@ -11,7 +11,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Robert Antoni Buj i Gelonch <[email protected]>, 2019\n"
 "Language-Team: Hungarian (https://www.transifex.com/mate/teams/13566/hu/)\n"
@@ -608,9 +608,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -933,10 +934,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/hy/hy.po b/help/hy/hy.po
index bb9eddb..1df543a 100644
--- a/help/hy/hy.po
+++ b/help/hy/hy.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Avag Sayan <[email protected]>, 2020\n"
 "Language-Team: Armenian (https://www.transifex.com/mate/teams/13566/hy/)\n"
@@ -596,9 +596,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -921,10 +922,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ia/ia.po b/help/ia/ia.po
index 49f2ec3..7378a4d 100644
--- a/help/ia/ia.po
+++ b/help/ia/ia.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: SoftInterlingua <>, 2020\n"
 "Language-Team: Interlingua (https://www.transifex.com/mate/teams/13566/ia/)\n"
@@ -595,9 +595,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -920,10 +921,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/id/id.po b/help/id/id.po
index 112e262..3cbe618 100644
--- a/help/id/id.po
+++ b/help/id/id.po
@@ -3,16 +3,15 @@
 # Stefano Karapetsas <[email protected]>, 2018
 # Willy Sudiarto Raharjo <[email protected]>, 2018
 # Wolfgang Ulbrich <[email protected]>, 2018
-# Kukuh Syafaat <[email protected]>, 2018
 # Chotibul Studio <[email protected]>, 2020
-# Andika Triwidada <[email protected]>, 2021
+# Andika Triwidada <[email protected]>, 2022
 # 
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
-"Last-Translator: Andika Triwidada <[email protected]>, 2021\n"
+"Last-Translator: Andika Triwidada <[email protected]>, 2022\n"
 "Language-Team: Indonesian (https://www.transifex.com/mate/teams/13566/id/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -28,12 +27,13 @@ msgstr ""
 "Ahmad Riza H Nst  <[email protected]>\n"
 "Dirgita <[email protected]>\n"
 "Tim MATE Indonesia <http://id.mate.org>\n"
-"Kukuh Syafaat <[email protected]>, 2017."
+"Kukuh Syafaat <[email protected]>, 2017.\n"
+"Andika Triwidada <[email protected]>, 2022."
 
 #. (itstool) path: articleinfo/title
 #: C/index.docbook:23
 msgid "<application>MATE Power Manager</application> Manual"
-msgstr ""
+msgstr "Manual <application>Manajer Daya MATE</application>"
 
 #. (itstool) path: abstract/para
 #: C/index.docbook:25
@@ -53,6 +53,7 @@ msgstr "<year>2015-2021</year> <holder>Tim Dokumentasi MATE</holder>"
 msgid ""
 "<year>2006-2009</year> <holder>Richard Hughes ([email protected])</holder>"
 msgstr ""
+"<year>2006-2009</year> <holder>Richard Hughes ([email protected])</holder>"
 
 #. (itstool) path: publisher/publishername
 #: C/index.docbook:52
@@ -63,13 +64,13 @@ msgstr "Tim Dokumentasi MATE"
 #. (itstool) path: revdescription/para
 #: C/index.docbook:55 C/index.docbook:98
 msgid "Richard Hughes"
-msgstr ""
+msgstr "Richard Hughes"
 
 #. (itstool) path: authorgroup/author
 #: C/index.docbook:61
 msgid ""
 "<surname>MATE Documentation Team</surname> <affiliation> </affiliation>"
-msgstr ""
+msgstr "<surname>Tim Dokumentasi MATE</surname> <affiliation> </affiliation>"
 
 #. (itstool) path: authorgroup/author
 #: C/index.docbook:71
@@ -77,17 +78,20 @@ msgid ""
 "<firstname>Richard</firstname> <surname>Hughes</surname> "
 "<email>[email protected]</email>"
 msgstr ""
+"<firstname>Richard</firstname> <surname>Hughes</surname> "
+"<email>[email protected]</email>"
 
 #. (itstool) path: revdescription/para
 #: C/index.docbook:95
 msgid "Richard Hughes <email>[email protected]</email>"
-msgstr ""
+msgstr "Richard Hughes <email>[email protected]</email>"
 
 #. (itstool) path: revhistory/revision
 #: C/index.docbook:91
 msgid ""
 "<revnumber>2.0</revnumber> <date>2006-08-30</date> <_:revdescription-1/>"
 msgstr ""
+"<revnumber>2.0</revnumber> <date>2006-08-30</date> <_:revdescription-1/>"
 
 #. (itstool) path: legalnotice/title
 #: C/index.docbook:104
@@ -112,7 +116,7 @@ msgstr ""
 #. (itstool) path: article/indexterm
 #: C/index.docbook:118
 msgid "<primary>mate-power-manager</primary>"
-msgstr ""
+msgstr "<primary>mate-power-manager</primary>"
 
 #. (itstool) path: section/title
 #: C/index.docbook:125
@@ -220,7 +224,7 @@ msgctxt "_"
 msgid ""
 "external ref='figures/gpm-charged.png' "
 "md5='cc83716555d07b13a3659683f96c531c'"
-msgstr ""
+msgstr "."
 
 #. (itstool) path: note/para
 #: C/index.docbook:200
@@ -264,7 +268,7 @@ msgstr ""
 msgctxt "_"
 msgid ""
 "external ref='figures/gpm-low.png' md5='6cd86acf26f251d78060dd2ecb6b6506'"
-msgstr ""
+msgstr "."
 
 #. (itstool) path: note/para
 #: C/index.docbook:232
@@ -302,7 +306,7 @@ msgctxt "_"
 msgid ""
 "external ref='figures/gpm-critical.png' "
 "md5='77b0848ed3bd0510b65f89e0d07a2fed'"
-msgstr ""
+msgstr "."
 
 #. (itstool) path: section/title
 #: C/index.docbook:259
@@ -332,7 +336,7 @@ msgctxt "_"
 msgid ""
 "external ref='figures/gpm-suspend-problem.png' "
 "md5='4e4c1fafda61c5ace02f957717ea7ce6'"
-msgstr ""
+msgstr "."
 
 #. (itstool) path: note/para
 #: C/index.docbook:276
@@ -377,7 +381,7 @@ msgctxt "_"
 msgid ""
 "external ref='figures/gpm-stats-graph.png' "
 "md5='c7cfa37ad6e96041a1c312d85236e7f6'"
-msgstr ""
+msgstr "."
 
 #. (itstool) path: note/para
 #: C/index.docbook:308
@@ -500,7 +504,7 @@ msgctxt "_"
 msgid ""
 "external ref='figures/gpm-prefs-ac.png' "
 "md5='dc4409a63218146e52d3e670b26785bd'"
-msgstr ""
+msgstr "."
 
 #. (itstool) path: section/title
 #: C/index.docbook:416
@@ -522,7 +526,7 @@ msgctxt "_"
 msgid ""
 "external ref='figures/gpm-prefs-battery.png' "
 "md5='89fe431e4f38073f7d58f38425ad1ee7'"
-msgstr ""
+msgstr "."
 
 #. (itstool) path: section/para
 #: C/index.docbook:427
@@ -551,7 +555,7 @@ msgctxt "_"
 msgid ""
 "external ref='figures/gpm-prefs-general.png' "
 "md5='52b7d145bd085d8af6f3194ac632c547'"
-msgstr ""
+msgstr "."
 
 #. (itstool) path: section/title
 #: C/index.docbook:448
@@ -586,7 +590,7 @@ msgstr ""
 msgctxt "_"
 msgid ""
 "external ref='figures/gs-prefs.png' md5='e9ce36b6ef557681ca4e8e90b71a7f46'"
-msgstr ""
+msgstr "."
 
 #. (itstool) path: section/para
 #: C/index.docbook:472
@@ -604,9 +608,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -651,7 +656,7 @@ msgstr ""
 #. (itstool) path: listitem/para
 #: C/index.docbook:519
 msgid "<command>org.mate.power-manager lock-use-screensaver</command>"
-msgstr ""
+msgstr "<command>org.mate.power-manager lock-use-screensaver</command>"
 
 #. (itstool) path: section/para
 #: C/index.docbook:524
@@ -663,17 +668,17 @@ msgstr ""
 #. (itstool) path: listitem/para
 #: C/index.docbook:531
 msgid "<command>org.mate.power-manager lock-blank-screen</command>"
-msgstr ""
+msgstr "<command>org.mate.power-manager lock-blank-screen</command>"
 
 #. (itstool) path: listitem/para
 #: C/index.docbook:536
 msgid "<command>org.mate.power-manager lock-suspend</command>"
-msgstr ""
+msgstr "<command>org.mate.power-manager lock-suspend</command>"
 
 #. (itstool) path: listitem/para
 #: C/index.docbook:541
 msgid "<command>org.mate.power-manager lock-hibernate</command>"
-msgstr ""
+msgstr "<command>org.mate.power-manager lock-hibernate</command>"
 
 #. (itstool) path: note/para
 #: C/index.docbook:548
@@ -716,7 +721,7 @@ msgctxt "_"
 msgid ""
 "external ref='figures/applet-brightness.png' "
 "md5='8ce34f6733215fb86009471f19850dcc'"
-msgstr ""
+msgstr "."
 
 #. (itstool) path: note/para
 #: C/index.docbook:580
@@ -752,7 +757,7 @@ msgctxt "_"
 msgid ""
 "external ref='figures/applet-inhibit.png' "
 "md5='7381a44dae4f17bfd47abaa54c0ca2a4'"
-msgstr ""
+msgstr "."
 
 #. (itstool) path: note/para
 #: C/index.docbook:608
@@ -801,7 +806,7 @@ msgctxt "_"
 msgid ""
 "external ref='figures/gpm-cell-capacity.png' "
 "md5='7635c3b846f39faf7b16a921a6ebb55c'"
-msgstr ""
+msgstr "."
 
 #. (itstool) path: section/title
 #: C/index.docbook:644
@@ -929,10 +934,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
@@ -1052,7 +1057,7 @@ msgstr ""
 #. (itstool) path: formalpara/title
 #: C/legal.xml:77
 msgid "Software Licence"
-msgstr ""
+msgstr "Lisensi Perangkat Lunak"
 
 #. (itstool) path: formalpara/para
 #: C/legal.xml:78
diff --git a/help/ie/ie.po b/help/ie/ie.po
index be8cfb7..281e70e 100644
--- a/help/ie/ie.po
+++ b/help/ie/ie.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Caarmi, 2019\n"
 "Language-Team: Interlingue (https://www.transifex.com/mate/teams/13566/ie/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ig/ig.po b/help/ig/ig.po
index fe7ab7b..9a40774 100644
--- a/help/ig/ig.po
+++ b/help/ig/ig.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Igbo (https://www.transifex.com/mate/teams/13566/ig/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/is/is.po b/help/is/is.po
index c8ddd96..10d91bc 100644
--- a/help/is/is.po
+++ b/help/is/is.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Icelandic (https://www.transifex.com/mate/teams/13566/is/)\n"
@@ -598,9 +598,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -923,10 +924,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/it/it.po b/help/it/it.po
index c207a7a..cce387b 100644
--- a/help/it/it.po
+++ b/help/it/it.po
@@ -5,33 +5,32 @@
 # Marco Z. <[email protected]>, 2018
 # Giuseppe Pignataro <[email protected]>, 2019
 # Enrico B. <[email protected]>, 2019
-# Alessandro Volturno <[email protected]>, 2021
+# Alessandro Volturno <[email protected]>, 2022
 # 
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
-"Last-Translator: Alessandro Volturno <[email protected]>, 2021\n"
+"Last-Translator: Alessandro Volturno <[email protected]>, 2022\n"
 "Language-Team: Italian (https://www.transifex.com/mate/teams/13566/it/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Language: it\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Plural-Forms: nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n"
 
 #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2
 msgctxt "_"
 msgid "translator-credits"
 msgstr ""
 "Bella Enrico, 2019\n"
-"Alessandro Volturno, 2020"
+"Alessandro Volturno, 2020, 2022"
 
 #. (itstool) path: articleinfo/title
 #: C/index.docbook:23
 msgid "<application>MATE Power Manager</application> Manual"
-msgstr ""
-"Manuale del <application>Gestore dell'alimentazione di MATE</application>"
+msgstr "Manuale di <application>MATE Power Manager</application>"
 
 #. (itstool) path: abstract/para
 #: C/index.docbook:25
@@ -40,8 +39,8 @@ msgid ""
 "MATE Desktop that manages the power settings for your laptop or desktop "
 "computer."
 msgstr ""
-"<application>Il Gestore dell'alimentazione di MATE </application> è un "
-"demone per il Desktop MATE che gestisce le impostazioni energetiche del tuo "
+"<application>MATE Power Manager </application> è un demone della sessione "
+"per il Desktop MATE che gestisce le impostazioni energetiche del vostro "
 "computer, desktop o portatile."
 
 #. (itstool) path: articleinfo/copyright
@@ -110,18 +109,16 @@ msgid ""
 "type=\"http\"><application>MATE Power Manager</application> Contact "
 "Page</ulink>."
 msgstr ""
-"Per segnalare un malfunzionamento o un suggerimento sul Gestore "
-"dell'alimentazione di MATE o su questo manuale, segui le indicazioni "
-"nella<ulink url=\"https://github.com/mate-desktop/mate-power-manager/\" "
-"type=\"http\">Pagina dei contatti di <application>Gestore dell'alimentazione"
-" di MATE</application></ulink>."
+"Per segnalare un malfunzionamento o un suggerimento su MATE Power Manager o "
+"su questo manuale, seguire le indicazioni nella<ulink "
+"url=\"https://github.com/mate-desktop/mate-power-manager/\" "
+"type=\"http\">Pagina dei contatti di <application>MATE Power "
+"Manager</application></ulink>."
 
 #. (itstool) path: article/indexterm
 #: C/index.docbook:115
 msgid "<primary><application>MATE Power Manager</application></primary>"
-msgstr ""
-"<primary><application>Gestore dell'alimentazione di "
-"MATE</application></primary>"
+msgstr "<primary><application>MATE Power Manager</application></primary>"
 
 #. (itstool) path: article/indexterm
 #: C/index.docbook:118
@@ -139,9 +136,8 @@ msgid ""
 "<primary><application>MATE Power Manager</application></primary> "
 "<secondary>Manual</secondary> <tertiary>mate-power-manager</tertiary>"
 msgstr ""
-"<primary><application>Gestore dell'alimentazione di "
-"MATE</application></primary> <secondary>Manuale</secondary> <tertiary>mate-"
-"power-manager</tertiary>"
+"<primary><application>MATE Power Manager</application></primary> "
+"<secondary>Manuale</secondary> <tertiary>mate-power-manager</tertiary>"
 
 #. (itstool) path: section/para
 #: C/index.docbook:135
@@ -149,13 +145,13 @@ msgid ""
 "The MATE Power Manager session daemon is a power management daemon for the "
 "<systemitem>MATE desktop</systemitem>"
 msgstr ""
-"Il Gestore dell'alimentazione di MATE è il demone per la gestione energetica"
-" del <systemitem> desktop MATE</systemitem>"
+"MATE Power Manager è il demone per la gestione energetica del "
+"<systemitem>desktop MATE</systemitem>"
 
 #. (itstool) path: section/title
 #: C/index.docbook:143
 msgid "Usage"
-msgstr "Uso"
+msgstr "Utilizzo"
 
 #. (itstool) path: section/para
 #: C/index.docbook:144
@@ -164,10 +160,9 @@ msgid ""
 "startup, but you can manually start <application>MATE Power "
 "Manager</application> by doing:"
 msgstr ""
-"Il <application>Gestore dell'alimentazione di MATE</application> viene "
-"solitamente avviato all'accensione, ma si può avviare il "
-"<application>Gestore dell'alimentazione di MATE</application> manualmente "
-"seguendo i seguenti passaggi:"
+"<application>MATE Power Manager</application> viene solitamente avviato "
+"all'accensione, ma si può avviare <application>MATE Power "
+"Manager</application> manualmente eseguendo i seguenti passaggi:"
 
 #. (itstool) path: varlistentry/term
 #: C/index.docbook:150
@@ -180,7 +175,7 @@ msgid ""
 "Type <command>G_MESSAGES_DEBUG=PowerManager mate-power-manager --no-"
 "daemon</command>, then press <keycap>Return</keycap>:"
 msgstr ""
-"Inserire <command>G_MESSAGES_DEBUG=PowerManager mate-power-manager --no-"
+"Digitare <command>G_MESSAGES_DEBUG=PowerManager mate-power-manager --no-"
 "daemon</command>, quindi premere <keycap>Invio</keycap>:"
 
 #. (itstool) path: section/title
@@ -194,8 +189,8 @@ msgid ""
 "When <application>MATE Power Manager</application> has started, the "
 "following notifications may be displayed."
 msgstr ""
-"Quando il <application>Gestore dell'alimentazione di MATE </application> è "
-"avviato, potrebbero apparire le seguenti notifiche."
+"Quando il <application>MATE Power Manager</application> è stato avviato, "
+"potrebbero apparire le seguenti notifiche."
 
 #. (itstool) path: section/title
 #: C/index.docbook:168
@@ -206,7 +201,7 @@ msgstr "Batteria in fase di scarica"
 #: C/index.docbook:170
 msgid "MATE Power Manager Notification when AC adapter is removed"
 msgstr ""
-"Il Gestore dell'alimentazione di MATE notifica quando l'alimentatore viene "
+"Notifica di MATE Power Manager quando l'alimentatore elettrico viene "
 "disconnesso"
 
 #. (itstool) path: imageobject/imagedata
@@ -242,8 +237,8 @@ msgstr "Carica completa"
 msgid ""
 "MATE Power Manager Notification when laptop primary battery is fully charged"
 msgstr ""
-"Il Gestore dell'alimentazione di MATE notifica quando la batteria del "
-"portatile è completamente carica"
+"Notifica di MATE Power Manager quando la batteria del portatile è "
+"completamente carica"
 
 #. (itstool) path: imageobject/imagedata
 #. This is a reference to an external file such as an image or video. When
@@ -278,8 +273,8 @@ msgid ""
 msgstr ""
 "Si otterrà una ripetizione della notifica se la carica della batteria scende"
 " sotto il 95% e viene poi ricaricata completamente. Questo per evitare che "
-"vengano mostrate notifiche ripetute su alcune macchine che non comunicano "
-"correttamente lo stato di carica al sistema."
+"vengano mostrate notifiche ripetute su alcune macchine se la batteria "
+"riporta al sistema lo stato di carica in modo errato."
 
 #. (itstool) path: section/title
 #: C/index.docbook:216
@@ -293,12 +288,12 @@ msgid ""
 "should consider switching to AC power really soon."
 msgstr ""
 "Quando la carica della batteria è bassa viene mostrata la seguente notifica."
-" E' importante collegarsi all'alimentatore al più presto."
+" E' importante collegare l'alimentatore elettrico al più presto."
 
 #. (itstool) path: figure/title
 #: C/index.docbook:222
 msgid "MATE Power Manager Notification when battery power is low"
-msgstr "Il gestore dell'alimentazione di MATE quando la carica è bassa"
+msgstr "Notifica di MATE Power Manager quando la carica è bassa"
 
 #. (itstool) path: imageobject/imagedata
 #. This is a reference to an external file such as an image or video. When
@@ -341,9 +336,7 @@ msgstr ""
 #: C/index.docbook:247
 msgid ""
 "MATE Power Manager Notification when the system power is critically low"
-msgstr ""
-"Il Gestore dell'alimentazione di MATE notifica quando il livello di carica è"
-" critico"
+msgstr "Notifica di MATE Power Manager quando il livello di carica è critico"
 
 #. (itstool) path: imageobject/imagedata
 #. This is a reference to an external file such as an image or video. When
@@ -362,7 +355,7 @@ msgstr ""
 #. (itstool) path: section/title
 #: C/index.docbook:259
 msgid "Suspend Failure"
-msgstr "Fallimento della sospensione"
+msgstr "Sospensione fallita"
 
 #. (itstool) path: section/para
 #: C/index.docbook:260
@@ -373,14 +366,13 @@ msgid ""
 msgstr ""
 "Quando si verifica un errore nella sospensione è possibile che venga "
 "visualizzato il seguente avviso. Il motivo più comune per questa notifica è "
-"che l'utente non ha il permesso di sospendere o ibernare il computer."
+"che l'utente non dispone dei permessi per sospendere o ibernare il computer."
 
 #. (itstool) path: figure/title
 #: C/index.docbook:266
 msgid "MATE Power Manager Notification when suspend failure occurs"
 msgstr ""
-"Il Gestore dell'alimentazione di MATE notifica quando il tentativo di "
-"sospensione fallisce"
+"Notifica di MATE Power Manager quando il tentativo di sospensione fallisce"
 
 #. (itstool) path: imageobject/imagedata
 #. This is a reference to an external file such as an image or video. When
@@ -427,16 +419,16 @@ msgid ""
 "internal IPC. This allows other applications to query and display the data "
 "if required."
 msgstr ""
-"E' stato rimosso dalla finestra informativa delle versioni precedenti del "
-"Gestore dell'alimentazione di MATE poiché l'interfaccia dati ora utilizza "
-"DBUS al posto dell'IPC interno. Questo permette ad altre applicazioni di "
-"leggere e visualizzare i dati se richeisto.."
+"Questo è stato rimosso dalla finestra informativa delle versioni precedenti "
+"di MATE Power Manager poiché l'interfaccia dati ora utilizza DBUS al posto "
+"dell'IPC interno. Questo permette ad altre applicazioni di leggere e "
+"visualizzare i dati quando richiesto.."
 
 #. (itstool) path: figure/title
 #: C/index.docbook:298
 msgid "Power History going from battery power to AC"
 msgstr ""
-"Cronologia di carica della batteria passando all'alimentazione da corrente "
+"Cronologia di carica della batteria passando all'alimentazione dalla rete "
 "elettrica"
 
 #. (itstool) path: imageobject/imagedata
@@ -460,10 +452,11 @@ msgid ""
 "required hardware. You may also see other hardware not shown here (for "
 "example UPS devices) but these are treated the same way as other devices."
 msgstr ""
-"Non è possibile visualizzare alcune opzioni o grafici se il computer non "
-"dispone dell'hardware necessario. Possono essere visualizzati anche altri "
-"hardware non mostrati qui (ad esempio i dispositivi UPS) ma questi vengono "
-"considerati allo stesso modo degli altri dispositivi."
+"Potrebbe non essere possibile visualizzare alcune opzioni o grafici se il "
+"vostro computer non dispone dell'hardware necessario. Possono essere "
+"visualizzati anche altri hardware qui non mostrati (come ad esempio i "
+"dispositivi UPS) che però vengono considerati allo stesso modo degli altri "
+"dispositivi."
 
 #. (itstool) path: section/title
 #: C/index.docbook:317
@@ -479,8 +472,8 @@ msgid ""
 "with this graph."
 msgstr ""
 "Il grafico mostra la percentuale di carica disponibile per la batteria "
-"principale, quindi se si dispone di una batteria principale e di una "
-"ausiliaria, verrà mostrato solo il valore medio. Con questo grafico non "
+"principale combinata, quindi se si dispone di una batteria principale e di "
+"una ausiliaria, verrà mostrato solo il valore medio. Con questo grafico non "
 "viene mostrata la legenda."
 
 #. (itstool) path: section/title
@@ -500,12 +493,12 @@ msgid ""
 "received."
 msgstr ""
 "Il grafico mostra la cronologia dell'alimentazione utilizzata dalla batteria"
-" principale. Questa linea rappresenta la quantità di energia che viene "
-"utilizzata per caricare le batterie o che viene prelevata dalle batterie. La"
-" linea dovrebbe andare verso l'alto quando vengono eseguite attività "
-"intensive per il processore e verso il basso quando il sistema è inattivo o "
-"quando lo schermo è oscurato. Questo grafico mostra una legenda quando sono "
-"stati ricevuti dei dati sugli eventi."
+" principale composita. Questa linea rappresenta la quantità di energia che "
+"viene utilizzata per caricare le batterie o quella che viene prelevata dalle"
+" batterie. La linea dovrebbe andare verso l'alto quando vengono eseguite "
+"attività intensive per il processore e verso il basso quando il sistema è "
+"inattivo o quando lo schermo è smorzato. Questo grafico mostra una legenda "
+"quando sono stati ricevuti i dati sugli eventi."
 
 #. (itstool) path: note/para
 #: C/index.docbook:341
@@ -536,11 +529,11 @@ msgid ""
 "with this graph when data events have been received."
 msgstr ""
 "Questo grafico mostra la cronologia della durata stimata per la batteria "
-"principale. La linea rappresenta il tempo residuo alla carica completa o "
-"alla scarica completa. Dovrebbe andare proporzionalmente verso l'alto quando"
-" la durata diminuisce e verso il basso quando la durata aumenta. Con questo "
-"grafico viene mostrata una legenda quando sono stati ricevuti dei dati sugli"
-" eventi."
+"composita principale. La linea rappresenta il tempo richiesto alla carica "
+"completa o quello per la scarica completa. Questa linea dovrebbe andare "
+"proporzionalmente verso l'alto quando la variazione diminuisce e verso il "
+"basso quando la variazione aumenta. Questo grafico mostra una legenda quando"
+" sono stati ricevuti i dati sugli eventi."
 
 #. (itstool) path: section/title
 #: C/index.docbook:366
@@ -557,14 +550,14 @@ msgstr "La finestra delle preferenze permette di controllare:"
 msgid "The LCD brightness when on AC and battery power"
 msgstr ""
 "La luminosità del display quando collegato alla rete elettrica oppure alla "
-"batteria."
+"batteria"
 
 #. (itstool) path: listitem/para
 #: C/index.docbook:377
 msgid "The idle time for the screen power-down and suspend action"
 msgstr ""
 "Il tempo di inattività perché avvenga lo spegnimento dello schermo e "
-"l'azione di sospensione."
+"l'azione di sospensione"
 
 #. (itstool) path: listitem/para
 #: C/index.docbook:382
@@ -583,9 +576,9 @@ msgid ""
 "not writable. This allows administrators to lock-down the actions that a "
 "user can select."
 msgstr ""
-"Alcuni regoli o opzioni potrebbero essere disabilitate se non è possibile "
-"scrivere le chiavi in dconf. Questo permette all'amministratore di sistema "
-"di limitare le azioni che l'utente può selezionare."
+"Alcuni regoli o opzioni potrebbero essere disabilitati se non è possibile "
+"scrivere le chiavi in dconf. Ciò permette all'amministratore di sistema di "
+"limitare le azioni che un utente può selezionare."
 
 #. (itstool) path: section/title
 #: C/index.docbook:402
@@ -595,9 +588,7 @@ msgstr "Preferenze di alimentazione dalla rete elettrica"
 #. (itstool) path: figure/title
 #: C/index.docbook:404
 msgid "MATE Power Manager AC tab"
-msgstr ""
-"Scheda Alimentazione da rete elettrica del Gestore dell'alimentazione di "
-"MATE"
+msgstr "Scheda Alimentazione da rete elettrica di MATE Power Manager"
 
 #. (itstool) path: imageobject/imagedata
 #. This is a reference to an external file such as an image or video. When
@@ -621,7 +612,7 @@ msgstr "Preferenze con alimentazione a batteria"
 #. (itstool) path: figure/title
 #: C/index.docbook:418
 msgid "MATE Power Manager battery tab"
-msgstr "Scheda Alimentazione da batteria del Gestore di alimentazione"
+msgstr "Scheda Alimentazione da batteria di MATE Power Manager"
 
 #. (itstool) path: imageobject/imagedata
 #. This is a reference to an external file such as an image or video. When
@@ -643,8 +634,9 @@ msgid ""
 "This allows a powerful computer to reduce the power usage when idle, or when"
 " the full capabilities are not required."
 msgstr ""
-"Permette ad un computer di ridurre il consumo energetico quando è inattivo o"
-" quando non sono richieste tutte le potenzialità."
+"Questo consente ad un computer particolarmente prestante di ridurre il "
+"consumo energetico quando è inattivo o quando non sono richieste tutte le "
+"sue potenzialità."
 
 #. (itstool) path: section/title
 #: C/index.docbook:434
@@ -654,7 +646,7 @@ msgstr "Preferenze generali"
 #. (itstool) path: figure/title
 #: C/index.docbook:436
 msgid "MATE Power Manager general tab"
-msgstr "Scheda Generale del Gestore dell'alimentazione di MATE"
+msgstr "Scheda Generale del Gestore di MATE Power Manager"
 
 #. (itstool) path: imageobject/imagedata
 #. This is a reference to an external file such as an image or video. When
@@ -691,10 +683,10 @@ msgstr ""
 "stata premuta, avvia un conteggio. Quando il valore di questo contatore "
 "raggiunge il valore impostato in <command>mate-screensaver-"
 "preferences</command>, allora il login è contrassegnato come 'sessione "
-"inattiva'. A questo punto il <application>Gestore dell'alimentazione di "
-"MATE</application> esegue tutte le operazioni di inattività della sessione, "
-"come l'attivazione della modalità a basso consumo e la riduzione della "
-"luminosità dello schermo."
+"inattivà. A questo punto il <application>MATE Power Manager</application> "
+"esegue tutte le operazioni di inattività della sessione, come l'attivazione "
+"della modalità a basso consumo e la riduzione della luminosità dello "
+"schermo."
 
 #. (itstool) path: figure/title
 #: C/index.docbook:461
@@ -726,12 +718,12 @@ msgid ""
 "idle, then the idle action is performed, which is usually to turn off the "
 "screen, or to suspend or hibernate."
 msgstr ""
-"Non appena la sessione viene considerata inattiva, il <application>Gestore "
-"dell'alimentazione di MATE</application> avvia il proprio timer di sistema. "
-"Quando viene raggiunto il timeout impostato in <command>mate-power-"
-"preferences</command> e il carico della CPU è basso, allora viene eseguita "
-"l'azione di inattività che di solito consiste nello spegnere lo schermo, "
-"sospendere il computer o ibernarlo."
+"Non appena la sessione viene considerata inattiva, il <application>MATE "
+"Power Manager</application> avvia il proprio timer di sistema. Quando viene "
+"raggiunto il timeout impostato in <command>mate-power-preferences</command> "
+"e il carico della CPU è basso, allora viene eseguita l'azione di inattività "
+"che di solito consiste nello spegnere lo schermo, sospendere il computer o "
+"ibernarlo."
 
 #. (itstool) path: section/para
 #: C/index.docbook:479
@@ -739,17 +731,18 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 "Per chiarezza è bene specificare che i cursori in <command>mate-power-"
 "preferences</command> sono impostati per avviarsi 1 minuto dopo il tempo di "
 "inattività della sessione, in quanto non possiamo logicamente avviarli prima"
 " che questa sia contrassegnata come inattiva. Se si regola il valore del "
 "timeout di 'sessione inattiva' in <command>mate-screensaver-"
-"preferences</command>, l'avvio delle opzioni in <command>mate-power-"
-"preferences</command> cambierà di conseguenza."
+"preferences</command>, l'avvio dei cursori in <command>mate-power-"
+"preferences</command> verrà automaticamente cambiato come conseguenza."
 
 #. (itstool) path: section/title
 #: C/index.docbook:491
@@ -759,7 +752,7 @@ msgstr "Preferenze avanzate"
 #. (itstool) path: section/title
 #: C/index.docbook:494
 msgid "Screen Dim Brightness"
-msgstr "Variazione della luminosità dello schermo"
+msgstr "Luminosità dello smorzamento dello schermo"
 
 #. (itstool) path: note/para
 #: C/index.docbook:496
@@ -783,11 +776,11 @@ msgid ""
 "screen\" in mate-screensaver when the lid is closed, or the system performs "
 "a suspend or hibernate action."
 msgstr ""
-"Per impostazione predefinita, il <application>Gestore dell'alimentazione di "
-"MATE</application> supporta uno schema di blocco semplice. Ciò significa che"
-" lo schermo si blocca se viene impostato \"Blocca schermo\" in mate-"
-"screensaver, quando viene chiuso il coperchio oppure quando il sistema "
-"esegue un'azione di sospensione o ibernazione."
+"Per impostazione predefinita, il <application>MATE Power "
+"Manager</application> supporta un semplice schema di blocco dello schermo. "
+"Ciò significa che lo schermo si blocca se viene impostato \"Blocca schermo\""
+" in mate-screensaver, quando viene chiuso il coperchio oppure quando il "
+"sistema esegue un'azione di sospensione o ibernazione."
 
 #. (itstool) path: section/para
 #: C/index.docbook:511
@@ -848,7 +841,7 @@ msgstr "MATE Power Applets"
 #. (itstool) path: section/title
 #: C/index.docbook:560
 msgid "Brightness Applet"
-msgstr "Applet luminosità"
+msgstr "Brightness Applet"
 
 #. (itstool) path: section/para
 #: C/index.docbook:561
@@ -858,15 +851,15 @@ msgid ""
 "laptop without brightness buttons, as you can now change the brightness "
 "easily."
 msgstr ""
-"L'applet luminosità consente di cambiare temporaneamente la luminosità senza"
-" modificare il l'impostazione predefinita. Può essere utile se si dispone di"
-" un computer portatile senza pulsanti dedicati a regolare la luminosità "
+"Brightness Applet consente di cambiare temporaneamente la luminosità senza "
+"modificare il l'impostazione predefinita. Può essere utile se si dispone di "
+"un computer portatile senza pulsanti dedicati a regolare la luminosità "
 "poiché è possibile modificare facilmente la luminosità dello schermo."
 
 #. (itstool) path: figure/title
 #: C/index.docbook:568
 msgid "Brightness applet drop-down."
-msgstr "Applet a discesa per la luminosità"
+msgstr "Tendina di Brightness Applet"
 
 #. (itstool) path: imageobject/imagedata
 #. This is a reference to an external file such as an image or video. When
@@ -891,7 +884,7 @@ msgstr ""
 #. (itstool) path: section/title
 #: C/index.docbook:587
 msgid "Inhibit Applet"
-msgstr "Applet di inibizione"
+msgstr "Inhibit Applet"
 
 #. (itstool) path: section/para
 #: C/index.docbook:588
@@ -901,16 +894,16 @@ msgid ""
 "proprietary programs such as VMWare or Matlab. Just click the icon for the "
 "auto-suspend to be inhibited, and click it again for normal operation."
 msgstr ""
-"L'applet di inibizione permette di impedire l'auto-sospensione del computer "
-"quando questo risulta inattivo. Può essere necessario se si utilizzano "
-"programmi vecchi o proprietari come VMWare o Matlab. È sufficiente fare clic"
-" sull'icona per bloccare l'auto-sospensione e fare nuovamente clic su di "
-"esso per tornare al funzionamento normale."
+"<application>Inhibit Applet</application> permette di impedire l'auto-"
+"sospensione del computer quando questo risulta inattivo. Può essere "
+"necessario se si utilizzano programmi vecchi o proprietari come VMWare o "
+"Matlab. È sufficiente fare clic sull'icona per bloccare l'auto-sospensione e"
+" fare nuovamente clic su di esso per tornare al funzionamento normale."
 
 #. (itstool) path: figure/title
 #: C/index.docbook:596
 msgid "Inhibit applet in inhibited state."
-msgstr "Applet di inibizione in stato Inibito."
+msgstr "Inhibit Applet nello stato di inibizione."
 
 #. (itstool) path: imageobject/imagedata
 #. This is a reference to an external file such as an image or video. When
@@ -933,10 +926,10 @@ msgid ""
 "make the application use the <function>Inhibit()</function> and "
 "<function>UnInhibit()</function> methods as this should 'just work'."
 msgstr ""
-"Non usare questa applet se si utilizza solo software MATE, segnalare invece "
-"un bug per fare in modo che l'applicazione utilizzi i metodi "
-"<function>Inhibit()</function> e <function>UnInhibit()</function>, perché "
-"questi dovrebbero funzionare."
+"Non usare questa applet se si utilizza esclusivamente software MATE, "
+"segnalare invece un bug per fare in modo che l'applicazione utilizzi i "
+"metodi <function>Inhibit()</function> e <function>UnInhibit()</function>, "
+"perché questi dovrebbero funzionare."
 
 #. (itstool) path: section/title
 #: C/index.docbook:618
@@ -1002,11 +995,11 @@ msgid ""
 msgstr ""
 "La sospensione è una funzione di risparmio energetico che garantisce il più "
 "basso livello di consumo energetico tale da permettere la conservazione dei "
-"dati dei programmi nella memoria. Quando il computer è sospeso qualsiasi "
-"operazione non verrà eseguita fino a quando non viene ripresa la normale "
-"attività, la quale non riprenderà finché non avverrà un evento esterno come "
-"la pressione di un tasto. Generalmente ci vogliono pochi secondi per "
-"sospendere e far ripartire il computer."
+"dati dei programmi nella memoria. Quando il computer è nello stato di "
+"Sospensione, qualsiasi operazione di calcolo non verrà eseguita fino a "
+"quando non riprende la normale attività, e ciò non accadrà finché non si "
+"verifica un evento esterno come la pressione di un tasto. Generalmente ci "
+"vogliono pochi secondi per sospendere e poi far ripartire il computer."
 
 #. (itstool) path: caution/para
 #: C/index.docbook:655
@@ -1016,9 +1009,9 @@ msgid ""
 "or run out of battery power on a laptop then you will lose your work."
 msgstr ""
 "In sospensione viene però ancora usata una piccola quantità di energia, "
-"quindi non è consigliabile se prevedi di lasciarlo in questo stato per "
-"lunghi periodi. Se rimuovi l'alimentazione su un desktop o esaurisci la "
-"batteria su un portatile perderai il lavoro non salvato."
+"quindi essa non è consigliabile per una azione da eseguire quando la "
+"batteria è bassa. Se si rimuove l'alimentazione su un desktop o si esaurisce"
+" la batteria di un portatile, si perderà tutto il lavoro non salvato."
 
 #. (itstool) path: section/para
 #: C/index.docbook:662
@@ -1032,12 +1025,12 @@ msgid ""
 "computer."
 msgstr ""
 "L'ibernazione salva lo stato completo del computer sul disco rigido e spegne"
-" l'alimentazione, in modo che il computer risulti spento. Non verrà riacceso"
-" finché non viene comandato da un evento esterno, come la pressione di un "
-"tasto. Questo è lo stato di risparmio energetico più efficiente disponibile."
-" Se si rimuove l'alimentazione su un desktop o siesaurisce la batteria di un"
-" portatile il lavoro non andrà perso. Può volerci anche più di un minuto per"
-" ibernare e risvegliare il computer."
+" l'alimentazione, in modo che il computer risulti spento. Esso non verrà "
+"riacceso finché non si verifica comandato da un evento esterno, come la "
+"pressione di un tasto. Questo è lo stato di risparmio energetico più "
+"efficiente disponibile. Se si rimuove l'alimentazione su un desktop o si "
+"esaurisce la batteria di un portatile il lavoro non andrà perso. Può volerci"
+" anche più di un minuto per ibernare o risvegliare il computer."
 
 #. (itstool) path: section/title
 #: C/index.docbook:675
@@ -1057,12 +1050,12 @@ msgid ""
 " <literal>org.mate.power-manager dpms-method-battery</literal> to one of the"
 " modes that work, e.g. standby, suspend or off."
 msgstr ""
-"È necessario cambiare la modalità di sospensione del DPMS usato dal "
-"<application>Gestore dell'alimentazione di MATE</application>. Aprire "
-"<command>dconf-editor</command>, quindi cambiare le chiavi "
-"<literal>org.mate.mate.power-manager dpms-method-ac</literal> e "
-"<literal>org.mate.power-manager dpms-method-battery</literal> in una delle "
-"modalità che risultano funzionanti, ad esempio standby, suspend o off."
+"È necessario cambiare la modalità di sospensione del DPMS utilizzato da "
+"<application>MATE Power Manager</application>. Aprire <command>dconf-"
+"editor</command>, quindi modificare le chiavi <literal>org.mate.mate.power-"
+"manager dpms-method-ac</literal> e <literal>org.mate.power-manager dpms-"
+"method-battery</literal> in una delle modalità che risultano funzionanti, ad"
+" esempio standby, suspend oppure off."
 
 #. (itstool) path: section/title
 #: C/index.docbook:689
@@ -1083,11 +1076,11 @@ msgid ""
 "use-time-for-policy false </command>"
 msgstr ""
 "Potresti essere in grado di utilizzare la carica percentuale per g-p-m da "
-"utilizzare come dati della carica. Apri <command>dconf-editor</command>, "
-"quindi modifica la chiave <command>org.mate.power-manager org.mate.power-"
-"manager</command> a \"false\". Si può fare facilmente con il seguente "
-"comando: <command>gsettings get org.mate.power-manager use-time-for-policy "
-"false</command>"
+"utilizzare come dati della carica. Aprire <command>dconf-editor</command>, "
+"quindi modificare la chiave <command>org.mate.power-manager org.mate.power-"
+"manager</command> a \"false\". Ciò può essere facilmente fatto con il "
+"seguente comando: <command>gsettings get org.mate.power-manager use-time-"
+"for-policy false</command>"
 
 #. (itstool) path: section/para
 #: C/index.docbook:703
@@ -1095,8 +1088,8 @@ msgid ""
 "This should get the policy actions working for you, but of course the time "
 "remaining will still be incorrect."
 msgstr ""
-"Questo dovrebbe permettere l'uso delle politiche di risparmio energetico, ma"
-" naturalmente il tempo rimanente sarà ancora errato."
+"Ciò dovrebbe permettere il funzionamento delle politiche di risparmio "
+"energetico, ma naturalmente il tempo rimanente sarà ancora incorretto."
 
 #. (itstool) path: section/title
 #: C/index.docbook:710
@@ -1114,10 +1107,9 @@ msgid ""
 "save power by hibernating or suspending."
 msgstr ""
 "Se l'applicazione sta eseguendo un'operazione lunga, potresti voler "
-"disabilitare la sospensione per un po' di tempo. Dovresti usare mate-session"
-" se davvero si desidera che l'utente non sia in grado di sospendere il "
-"computer o che lo stesso risparmi energia con l'ibernazione o la "
-"sospensione."
+"disabilitare la sospensione per un po' di tempo. Si potrebbe usare mate-"
+"session se si vuole veramente che l'utente non sia in grado di sospendere il"
+" computer o che esso risparmi energia con l'ibernazione o la sospensione."
 
 #. (itstool) path: section/title
 #: C/index.docbook:723
@@ -1125,8 +1117,8 @@ msgid ""
 "I'm running ACPI. Why do events (such as removing the AC adapter) take so "
 "long to register?"
 msgstr ""
-"Utilizzo ACPI. Perché la registrazione degli eventi (come la rimozione "
-"dell'alimentatore) richiede così tanto tempo?"
+"Utilizzo ACPI. Perché gli eventi (come la rimozione dell'alimentatore) "
+"richiedono così tanto tempo per essere registrati?"
 
 #. (itstool) path: section/para
 #: C/index.docbook:727
@@ -1162,15 +1154,16 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 "Cercare il processo <command>hald-addon-acpi</command>. Se questo non è in "
-"esecuzione, verificare che HAL venga eseguito con l'opzione <command"
-">--retain-privileges</command> nell'initscript <command>haldaemon</command>."
-" Un'alternativa può essere l'uso di acpid al posto del file proc del kernel."
+"esecuzione, verificare che HAL venga eseguito con l'opzione "
+"<command>--retain-privileges</command> nell'initscript "
+"<command>haldaemon</command>. Un'alternativa può essere l'uso di acpid al "
+"posto del file proc del kernel."
 
 #. (itstool) path: para/ulink
 #: C/legal.xml:9
@@ -1191,8 +1184,8 @@ msgstr ""
 "documento in base ai termini della GNU Free Documentation License (GFDL), "
 "Versione 1.1 o qualsiasi versione successiva pubblicata dalla Free Software "
 "Foundation senza sezioni invarianti, senza testi di copertina e nessun testo"
-" di retro copertina. Puoi trovare una copia del GFDL qui <_:ulink-1/> o nel "
-"file COPYING-DOCS distribuito con questo manuale."
+" di retro copertina. Potete trovare una copia della GFDL qui <_:ulink-1/> o "
+"nel file COPYING-DOCS distribuito con questo manuale."
 
 #. (itstool) path: legalnotice/para
 #: C/legal.xml:12
@@ -1202,7 +1195,7 @@ msgid ""
 "you can do so by adding a copy of the license to the manual, as described in"
 " section 6 of the license."
 msgstr ""
-"Questo manuale fa parte di una raccolta di manuali MATE distribuita in "
+"Questo manuale fa parte di una raccolta di manuali MATE distribuiti in "
 "conformità con la GFDL. Per poter distribuire questo manuale separatamente, "
 "è necessario inserirvi una copia della licenza, come descritto nella sezione"
 " 6 della licenza."
@@ -1217,10 +1210,10 @@ msgid ""
 "capital letters."
 msgstr ""
 "Molti dei nomi usati dalle aziende per distinguere i propri prodotti e "
-"servizi sono rivendicati come marchi. Quando questi nomi compaiono nella "
-"documentazione di MATE, e i partecipanti al MATE Documentation Project sono "
-"consapevoli del loro utilizzo, essi vengono scritti in lettere maiuscole o "
-"con l'iniziale maiuscola."
+"servizi sono rivendicati come marchi registrati. Quando questi nomi "
+"compaiono nella documentazione di MATE, e i partecipanti al MATE "
+"Documentation Project sono consapevoli del loro utilizzo, essi vengono "
+"scritti in lettere maiuscole o con l'iniziale maiuscola."
 
 #. (itstool) path: listitem/para
 #: C/legal.xml:35
@@ -1237,19 +1230,19 @@ msgid ""
 "ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY DOCUMENT OR MODIFIED VERSION "
 "OF THE DOCUMENT IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER; AND"
 msgstr ""
-"IL DOCUMENTO VIENE FORNITO SENZA GARANZIE DI ALCUN TIPO, ESPLICITE O "
-"IMPLICITE, INCLUSE, MA SENZA LIMITAZIONE, LE GARANZIE ATTESTANTI CHE IL "
-"DOCUMENTO O LE SUE VERSIONI MODIFICATE SIANO PRIVI DI DIFETTI, "
-"COMMERCIALIZZABILI, IDONEI A UN DETERMINATO SCOPO O CHE NON VIOLINO DIRITTI "
-"DI TERZI. SI DECLINA QUALUNQUE RESPONSABILITÀ RIGUARDO AI RISCHI INERENTI LA"
-" QUALITÀ, L'ACCURATEZZA E LE PRESTAZIONI DEL DOCUMENTO O DI UNA SUA VERSIONE"
-" MODIFICATA. QUALORA UN DOCUMENTO O UNA SUA VERSIONE MODIFICATA DOVESSERO "
-"PRESENTARE QUALUNQUE TIPO DI DIFETTO, IL COSTO DI EVENTUALI INTERVENTI DI "
-"ASSISTENZA, RIPARAZIONE O CORREZIONE SARÀ A CARICO DELL'UTENTE (NON DEL "
-"REDATTORE INIZIALE, DELL'AUTORE O DI ALTRI COLLABORATORI). QUESTA "
+"IL DOCUMENTO VIENE FORNITO SULLA BASE DEL \"COME È\" SENZA GARANZIE DI ALCUN"
+" TIPO, ESPLICITE O IMPLICITE, INCLUSE, MA SENZA LIMITAZIONE, LE GARANZIE "
+"ATTESTANTI CHE IL DOCUMENTO O LE SUE VERSIONI MODIFICATE SIANO PRIVI DI "
+"DIFETTI, COMMERCIALIZZABILI, IDONEI A UN DETERMINATO SCOPO O CHE NON VIOLINO"
+" DIRITTI DI TERZI. SI DECLINA QUALUNQUE RESPONSABILITÀ RIGUARDO AI RISCHI "
+"INERENTI LA QUALITÀ, L'ACCURATEZZA E LE PRESTAZIONI DEL DOCUMENTO O DI UNA "
+"SUA VERSIONE MODIFICATA. QUALORA UN DOCUMENTO O UNA SUA VERSIONE MODIFICATA "
+"DOVESSERO PRESENTARE QUALUNQUE TIPO DI DIFETTO, IL COSTO DI EVENTUALI "
+"INTERVENTI DI ASSISTENZA, RIPARAZIONE O CORREZIONE SARÀ A CARICO DELL'UTENTE"
+" (NON DEL REDATTORE INIZIALE, DELL'AUTORE O DI ALTRI COLLABORATORI). QUESTA "
 "LIMITAZIONE DELLA GARANZIA COSTITUISCE PARTE ESSENZIALE DELLA LICENZA. L'USO"
 " DEL DOCUMENTO O DELLE SUE VERSIONI MODIFICATE È CONSENTITO SOLO ENTRO I "
-"TERMINI DI QUESTA LIMITAZIONE DELLA GARANZIA;"
+"TERMINI DI QUESTA LIMITAZIONE DELLA GARANZIA; E"
 
 #. (itstool) path: listitem/para
 #: C/legal.xml:55
@@ -1265,17 +1258,17 @@ msgid ""
 "VERSIONS OF THE DOCUMENT, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE"
 " POSSIBILITY OF SUCH DAMAGES."
 msgstr ""
-"IN NESSUNA CIRCOSTANZA E PER NESSUNA RAGIONE LEGALE, INCLUSI I PRINCIPI DI "
-"COLPA (INCLUSA LA NEGLIGENZA), ACCORDO CONTRATTUALE O ALTRO, SARÀ POSSIBILE "
-"CONSIDERARE L'AUTORE, IL REDATTORE INIZIALE, GLI ALTRI COLLABORATORI, "
-"QUALUNQUE DISTRIBUTORE DEL DOCUMENTO O DI UNA SUA VERSIONE MODIFICATA O "
-"QUALUNQUE FORNITORE DELLE PERSONE CITATE, RESPONSABILE NEI CONFRONTI DI "
-"QUALUNQUE PERSONA PER DANNI DIRETTI, INDIRETTI, SPECIALI, INCIDENTALI O "
-"CONSEGUENTI DI QUALUNQUE NATURA, INCLUSI, MA SENZA LIMITAZIONE, I DANNI PER "
-"PERDITA DI AVVIAMENTO, INTERRUZIONE DEL LAVORO, GUASTO O MALFUNZIONAMENTO "
-"DEL COMPUTER O QUALUNQUE ALTRO DANNO O PERDITA DERIVANTE O CORRELATA ALL'USO"
-" DEL DOCUMENTO O DI UNA SUA VERSIONE MODIFICATA, ANCHE QUALORA LE PERSONE "
-"CITATE FOSSERO STATE INFORMATE DELLA POSSIBILITÀ DI TALI DANNI."
+"IN NESSUNA CIRCOSTANZA E PER NESSUNA RAGIONE LEGALE, SIA ESSO TORTO (INCLUSA"
+" LA NEGLIGENZA), ACCORDO CONTRATTUALE O ALTRO, SARÀ POSSIBILE CONSIDERARE "
+"L'AUTORE, IL REDATTORE INIZIALE, GLI ALTRI COLLABORATORI, QUALUNQUE "
+"DISTRIBUTORE DEL DOCUMENTO O DI UNA SUA VERSIONE MODIFICATA O QUALUNQUE "
+"FORNITORE DELLE PERSONE CITATE, RESPONSABILE NEI CONFRONTI DI QUALUNQUE "
+"PERSONA PER DANNI DIRETTI, INDIRETTI, SPECIALI, INCIDENTALI O CONSEGUENTI DI"
+" QUALUNQUE NATURA, INCLUSI, MA SENZA LIMITAZIONE, I DANNI PER PERDITA DI "
+"AVVIAMENTO, INTERRUZIONE DEL LAVORO, GUASTO O MALFUNZIONAMENTO DEL COMPUTER "
+"O QUALUNQUE ALTRO DANNO O PERDITA DERIVANTE O CORRELATA ALL'USO DEL "
+"DOCUMENTO O DI UNA SUA VERSIONE MODIFICATA, ANCHE QUALORA LE PERSONE CITATE "
+"FOSSERO STATE INFORMATE DELLA POSSIBILITÀ DI TALI DANNI."
 
 #. (itstool) path: legalnotice/para
 #: C/legal.xml:28
@@ -1301,10 +1294,10 @@ msgid ""
 "Free Software Foundation; either version 2 of the License, or (at your "
 "option) any later version."
 msgstr ""
-"Gestore dell'alimentazione di MATE è software libero; è possibile "
-"ridistribuirlo o modificarlo secondo i termini della licenza GNU General "
-"Public License, come pubblicata dalla Free Software Foundation; versione 2 "
-"della licenza, o (a scelta) una versione più recente."
+"MATE Power Manager è software libero; è possibile ridistribuirlo o "
+"modificarlo secondo i termini della licenza GNU General Public License, come"
+" pubblicata dalla Free Software Foundation; versione 2 della licenza, o (a "
+"scelta) una qualsiasi versione più recente."
 
 #. (itstool) path: formalpara/para
 #: C/legal.xml:83
@@ -1314,10 +1307,10 @@ msgid ""
 "or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for "
 "more details."
 msgstr ""
-"Gestore dell'alimentazione di MATE è distribuito nella speranza che possa "
-"risultare utile, ma SENZA ALCUNA GARANZIA, nemmeno la garanzia implicita di "
-"COMMERCIABILITÀ o APPLICABILITÀ PER UNO SCOPO PARTICOLARE. Per maggiori "
-"dettagli consultare la GNU General Public License."
+"MATE Power Manager è distribuito nella speranza che possa risultare utile, "
+"ma SENZA ALCUNA GARANZIA, nemmeno la garanzia implicita di COMMERCIABILITÀ o"
+" APPLICABILITÀ PER UNO SCOPO PARTICOLARE. Per maggiori dettagli consultare "
+"la GNU General Public License."
 
 #. (itstool) path: formalpara/para
 #: C/legal.xml:88
@@ -1326,7 +1319,6 @@ msgid ""
 " MATE Power Manager; if not, write to the Free Software Foundation, Inc., 51"
 " Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA."
 msgstr ""
-"Una copia della GNU General Public License dovrebbe essere stata fornita con"
-" Gestore dell'alimentazione di MATE. In caso contrario scrivi a Free "
-"Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA "
-"02110-1301, USA."
+"Si dovrebbe aver ricevuto una copia della GNU General Public License MATE "
+"Power Manager. In caso contrario scrivere a Free Software Foundation, Inc., "
+"51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA."
diff --git a/help/ja/ja.po b/help/ja/ja.po
index 752acec..fcc2a57 100644
--- a/help/ja/ja.po
+++ b/help/ja/ja.po
@@ -8,7 +8,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Green, 2021\n"
 "Language-Team: Japanese (https://www.transifex.com/mate/teams/13566/ja/)\n"
@@ -677,9 +677,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 "これをより明確にすると、論理的にセッションがアイドルとしてマークされる前にトリガすることはできないので、<command>mate-power-"
 "preferences</command> はセッション・タイムアウト +1 分の値で開始するように設定されています。<command>mate-"
@@ -960,10 +961,11 @@ msgid ""
 " <literal>org.mate.power-manager dpms-method-battery</literal> to one of the"
 " modes that work, e.g. standby, suspend or off."
 msgstr ""
-"<application>MATE 電源管理</application>が使用する DPMS サスペンドモードを変更する必要があります。<command"
-">dconf-editor</command> を開き、<literal>org.mate.power-manager dpms-method-"
-"ac</literal> キー と <literal>org.mate.power-manager dpms-method-"
-"battery</literal> キーをスタンバイ、サスペンド、オフなどのうちで動作可能なモードに変更してください。"
+"<application>MATE 電源管理</application>が使用する DPMS "
+"サスペンドモードを変更する必要があります。<command>dconf-editor</command> "
+"を開き、<literal>org.mate.power-manager dpms-method-ac</literal> キー と "
+"<literal>org.mate.power-manager dpms-method-battery</literal> "
+"キーをスタンバイ、サスペンド、オフなどのうちで動作可能なモードに変更してください。"
 
 #. (itstool) path: section/title
 #: C/index.docbook:689
@@ -1044,10 +1046,10 @@ msgstr "最初のケースでは、実行中のHALプロセスを検索します
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 "プロセス <command>hald-addon-acpi</command> "
 "をチェックしてください。もし実行されていない場合は、<command>haldaemon</command> の initscript で "
diff --git a/help/ka/ka.po b/help/ka/ka.po
index 1d4c79d..77626c3 100644
--- a/help/ka/ka.po
+++ b/help/ka/ka.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Georgian (https://www.transifex.com/mate/teams/13566/ka/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/kab/kab.po b/help/kab/kab.po
index f8c5048..babf266 100644
--- a/help/kab/kab.po
+++ b/help/kab/kab.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Slimane Selyan AMIRI <[email protected]>, 2020\n"
 "Language-Team: Kabyle (https://www.transifex.com/mate/teams/13566/kab/)\n"
@@ -597,9 +597,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -922,10 +923,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/kk/kk.po b/help/kk/kk.po
index 16f2f58..a000d2a 100644
--- a/help/kk/kk.po
+++ b/help/kk/kk.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Kazakh (https://www.transifex.com/mate/teams/13566/kk/)\n"
@@ -595,9 +595,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -920,10 +921,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/kn/kn.po b/help/kn/kn.po
index 0e9606b..9608e26 100644
--- a/help/kn/kn.po
+++ b/help/kn/kn.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: karthik holla <[email protected]>, 2018\n"
 "Language-Team: Kannada (https://www.transifex.com/mate/teams/13566/kn/)\n"
@@ -597,9 +597,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -922,10 +923,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ko/ko.po b/help/ko/ko.po
index aedb776..b03e7e9 100644
--- a/help/ko/ko.po
+++ b/help/ko/ko.po
@@ -2,14 +2,14 @@
 # Translators:
 # Seong-ho Cho <[email protected]>, 2018
 # Stefano Karapetsas <[email protected]>, 2018
-# 박정규(Jung-Kyu Park) <[email protected]>, 2018
+# 1763f4a4329a2376c933c5e919a36cbc_341ca53 <1f851310383599d03339229d772e1290_119292>, 2018
 # Wolfgang Ulbrich <[email protected]>, 2018
 # JungHee Lee <[email protected]>, 2021
 # 
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: JungHee Lee <[email protected]>, 2021\n"
 "Language-Team: Korean (https://www.transifex.com/mate/teams/13566/ko/)\n"
@@ -628,9 +628,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -959,10 +960,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ku/ku.po b/help/ku/ku.po
index 99518f2..07c8b03 100644
--- a/help/ku/ku.po
+++ b/help/ku/ku.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Kurdish (https://www.transifex.com/mate/teams/13566/ku/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ky/ky.po b/help/ky/ky.po
index 91c211e..e1788a6 100644
--- a/help/ky/ky.po
+++ b/help/ky/ky.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: 41e38594a6ab66d45dbd71e8e44a0b16_36d21e8, 2018\n"
 "Language-Team: Kyrgyz (https://www.transifex.com/mate/teams/13566/ky/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/lt/lt.po b/help/lt/lt.po
index ec39a50..20675f6 100644
--- a/help/lt/lt.po
+++ b/help/lt/lt.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Džiugas Grėbliūnas <[email protected]>, 2020\n"
 "Language-Team: Lithuanian (https://www.transifex.com/mate/teams/13566/lt/)\n"
@@ -607,9 +607,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -932,10 +933,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/lv/lv.po b/help/lv/lv.po
index 4ef631a..d342f63 100644
--- a/help/lv/lv.po
+++ b/help/lv/lv.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: duck <[email protected]>, 2018\n"
 "Language-Team: Latvian (https://www.transifex.com/mate/teams/13566/lv/)\n"
@@ -597,9 +597,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -922,10 +923,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/mai/mai.po b/help/mai/mai.po
index d109c70..5517dc4 100644
--- a/help/mai/mai.po
+++ b/help/mai/mai.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Maithili (https://www.transifex.com/mate/teams/13566/mai/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/mg/mg.po b/help/mg/mg.po
index bc8205c..d4f55ec 100644
--- a/help/mg/mg.po
+++ b/help/mg/mg.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Malagasy (https://www.transifex.com/mate/teams/13566/mg/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/mk/mk.po b/help/mk/mk.po
index db9b423..35d3f05 100644
--- a/help/mk/mk.po
+++ b/help/mk/mk.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: exoos <[email protected]>, 2018\n"
 "Language-Team: Macedonian (https://www.transifex.com/mate/teams/13566/mk/)\n"
@@ -595,9 +595,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -920,10 +921,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ml/ml.po b/help/ml/ml.po
index 6e883ac..194c50f 100644
--- a/help/ml/ml.po
+++ b/help/ml/ml.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Malayalam (https://www.transifex.com/mate/teams/13566/ml/)\n"
@@ -596,9 +596,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -921,10 +922,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/mn/mn.po b/help/mn/mn.po
index 4d827b0..8cf0439 100644
--- a/help/mn/mn.po
+++ b/help/mn/mn.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Mongolian (https://www.transifex.com/mate/teams/13566/mn/)\n"
@@ -596,9 +596,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -921,10 +922,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/mr/mr.po b/help/mr/mr.po
index 3ff55df..3f9b154 100644
--- a/help/mr/mr.po
+++ b/help/mr/mr.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Vaibhav S Dalvi <[email protected]>, 2018\n"
 "Language-Team: Marathi (https://www.transifex.com/mate/teams/13566/mr/)\n"
@@ -595,9 +595,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -920,10 +921,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ms/ms.po b/help/ms/ms.po
index 6b741e3..689482e 100644
--- a/help/ms/ms.po
+++ b/help/ms/ms.po
@@ -8,7 +8,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: abuyop <[email protected]>, 2021\n"
 "Language-Team: Malay (https://www.transifex.com/mate/teams/13566/ms/)\n"
@@ -712,16 +712,17 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 "Iaitu, pelungsur dalam <command>mate-power-preferences</command> telah "
 "ditetapkan untuk mulakan nilai session-timeout + 1 minit, kerana secara "
 "logiknya tidak boleh dipicu sebelum sesi dianggap sebagai melahu. Jika anda "
 "melaras nilai had masa tamat 'session idle'  dalam <command>mate-"
-"screensaver-preferences</command> maka nilai mula pelungsur dalam <command"
-">mate-power-preferences</command> juga akan berubah."
+"screensaver-preferences</command> maka nilai mula pelungsur dalam "
+"<command>mate-power-preferences</command> juga akan berubah."
 
 #. (itstool) path: section/title
 #: C/index.docbook:491
@@ -1054,10 +1055,10 @@ msgid ""
 "use-time-for-policy false </command>"
 msgstr ""
 "Anda boleh gunakan cas peratus bagi g-p-m to use menggunakan data dasar. "
-"Buka <command>dconf-editor</command>, kemudian ubah kunci <command>org.mate"
-".power-manager use-time-for-policy</command> menjadi false. Anda juga boleh "
-"lakukannya dengan mudah iaitu: <command> gsettings get org.mate.power-"
-"manager use-time-for-policy false </command>"
+"Buka <command>dconf-editor</command>, kemudian ubah kunci "
+"<command>org.mate.power-manager use-time-for-policy</command> menjadi false."
+" Anda juga boleh lakukannya dengan mudah iaitu: <command> gsettings get "
+"org.mate.power-manager use-time-for-policy false </command>"
 
 #. (itstool) path: section/para
 #: C/index.docbook:703
@@ -1127,10 +1128,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 "Dan periksa proses <command>hald-addon-acpi</command>. Jika tidak "
 "dijalankan, sila pastikan HAL telah dijalankan bersama-sama dengan pilihan "
diff --git a/help/nb/nb.po b/help/nb/nb.po
index 08e927b..15ec303 100644
--- a/help/nb/nb.po
+++ b/help/nb/nb.po
@@ -9,7 +9,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Jan Sherdahl, 2021\n"
 "Language-Team: Norwegian Bokmål (https://www.transifex.com/mate/teams/13566/nb/)\n"
@@ -612,9 +612,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -937,10 +938,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/nds/nds.po b/help/nds/nds.po
index 043d24c..9a6e21e 100644
--- a/help/nds/nds.po
+++ b/help/nds/nds.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Low German (https://www.transifex.com/mate/teams/13566/nds/)\n"
@@ -597,9 +597,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -922,10 +923,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ne/ne.po b/help/ne/ne.po
index a74f41a..55ad571 100644
--- a/help/ne/ne.po
+++ b/help/ne/ne.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: chautari <[email protected]>, 2018\n"
 "Language-Team: Nepali (https://www.transifex.com/mate/teams/13566/ne/)\n"
@@ -598,9 +598,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -923,10 +924,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/nl/nl.po b/help/nl/nl.po
index a9675a5..6a25800 100644
--- a/help/nl/nl.po
+++ b/help/nl/nl.po
@@ -4,14 +4,14 @@
 # Pjotr <[email protected]>, 2018
 # dragnadh, 2018
 # b9b0d258fa591da5350b6e67cf68cd68_9fecbb4 <28506b9ff23f99a34b566250ce31bbad_250479>, 2018
-# Benji Leenders, 2020
+# kaasknak, 2021
 # 
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
-"Last-Translator: Benji Leenders, 2020\n"
+"Last-Translator: kaasknak, 2021\n"
 "Language-Team: Dutch (https://www.transifex.com/mate/teams/13566/nl/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -609,9 +609,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -934,10 +935,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
@@ -1026,6 +1027,17 @@ msgid ""
 "VERSIONS OF THE DOCUMENT, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE"
 " POSSIBILITY OF SUCH DAMAGES."
 msgstr ""
+"ONDER GEEN ENKELE OMSTANDIGHEDEN EN ONDER GEEN JURIDISCHE THEORIE, ZIJ HET "
+"WETTELIJK (INCLUSIEF NALATIGHEID), CONTRACT, OF ANDERZIJDS ZAL DE AUTEUR, "
+"INITIËLE AUTEUR, ENIGE BIJDRAGER VAN HET DOCUMENT OF DE AANPASTE VERSIE VAN "
+"HET DOCUMENT, NOCH ENIGE LEVERANCIER VAN EEN VAN DEZE PARTIJEN, "
+"AANSPRAKELIJK GEHOUDEN WORDEN DOOR ENIG PERSOON VOOR ENIGE DIRECTE, "
+"INDIRECTE, SPECIALE, INCIDENTELE, OF GEVOLG SCHADE IN ELKE VORM INCLUSIEF, "
+"ZONDER BEPERKING, SCHADE DOOR VERLIES VAN GOEDE WIL, WERK ONDERBREKING, "
+"COMPUTER FALEN OF STORING, OF ENIGE ANDERE VORM VAN SCHADE OF VERLIES ALS "
+"GEVOLGEN VAN HET GEBRUIKT VAN HET DOCUMENT EN DE AANGEPASTE VERSIES VAN HET "
+"DOCUMENT, ZELFS ALS ZO EEN PARTIJ GEÏNFORMEERD ZOU ZIJN OVER DE MOGELIJKHEID"
+" VAN ZULKE SCHADES."
 
 #. (itstool) path: legalnotice/para
 #: C/legal.xml:28
diff --git a/help/nn/nn.po b/help/nn/nn.po
index 5da7298..9d315a3 100644
--- a/help/nn/nn.po
+++ b/help/nn/nn.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Andrew Rabbitt <[email protected]>, 2020\n"
 "Language-Team: Norwegian Nynorsk (https://www.transifex.com/mate/teams/13566/nn/)\n"
@@ -598,9 +598,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -923,10 +924,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/oc/oc.po b/help/oc/oc.po
index afacd1d..494bd49 100644
--- a/help/oc/oc.po
+++ b/help/oc/oc.po
@@ -9,7 +9,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Quentin PAGÈS, 2021\n"
 "Language-Team: Occitan (post 1500) (https://www.transifex.com/mate/teams/13566/oc/)\n"
@@ -613,9 +613,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -942,10 +943,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/or/or.po b/help/or/or.po
index 01cffa6..a412572 100644
--- a/help/or/or.po
+++ b/help/or/or.po
@@ -5,10 +5,10 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
-"Language-Team: Oriya (https://www.transifex.com/mate/teams/13566/or/)\n"
+"Language-Team: Odia (https://www.transifex.com/mate/teams/13566/or/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/pa/pa.po b/help/pa/pa.po
index deddc48..51ccb97 100644
--- a/help/pa/pa.po
+++ b/help/pa/pa.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Wolfgang Ulbrich <[email protected]>, 2018\n"
 "Language-Team: Panjabi (Punjabi) (https://www.transifex.com/mate/teams/13566/pa/)\n"
@@ -599,9 +599,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -924,10 +925,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/pl/pl.po b/help/pl/pl.po
index 9781702..84f070f 100644
--- a/help/pl/pl.po
+++ b/help/pl/pl.po
@@ -11,7 +11,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Daniel Tokarzewski <[email protected]>, 2021\n"
 "Language-Team: Polish (https://www.transifex.com/mate/teams/13566/pl/)\n"
@@ -604,9 +604,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -929,10 +930,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ps/ps.po b/help/ps/ps.po
index 5cd5f2f..bcb78f9 100644
--- a/help/ps/ps.po
+++ b/help/ps/ps.po
@@ -5,10 +5,10 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
-"Language-Team: Pushto (https://www.transifex.com/mate/teams/13566/ps/)\n"
+"Language-Team: Pashto (https://www.transifex.com/mate/teams/13566/ps/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
@@ -596,9 +596,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -921,10 +922,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/pt/pt.po b/help/pt/pt.po
index 141275f..ee2e1dd 100644
--- a/help/pt/pt.po
+++ b/help/pt/pt.po
@@ -11,7 +11,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Hugo Carvalho <[email protected]>, 2020\n"
 "Language-Team: Portuguese (https://www.transifex.com/mate/teams/13566/pt/)\n"
@@ -19,7 +19,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Language: pt\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Plural-Forms: nplurals=3; plural=(n == 0 || n == 1) ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n"
 
 #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2
 msgctxt "_"
@@ -621,9 +621,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -952,10 +953,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/pt_BR/pt_BR.po b/help/pt_BR/pt_BR.po
index 2b7ee04..e6d35c4 100644
--- a/help/pt_BR/pt_BR.po
+++ b/help/pt_BR/pt_BR.po
@@ -15,7 +15,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: gustavo s, 2020\n"
 "Language-Team: Portuguese (Brazil) (https://www.transifex.com/mate/teams/13566/pt_BR/)\n"
@@ -23,7 +23,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Language: pt_BR\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+"Plural-Forms: nplurals=3; plural=(n == 0 || n == 1) ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;\n"
 
 #. Put one translator per line, in the form NAME <EMAIL>, YEAR1, YEAR2
 msgctxt "_"
@@ -649,9 +649,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -980,10 +981,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ro/ro.po b/help/ro/ro.po
index cf07fb0..b54b7a2 100644
--- a/help/ro/ro.po
+++ b/help/ro/ro.po
@@ -2,13 +2,14 @@
 # Translators:
 # Stefano Karapetsas <[email protected]>, 2018
 # Daniel <[email protected]>, 2018
+# sidro <[email protected]>, 2021
 # 
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
-"Last-Translator: Daniel <[email protected]>, 2018\n"
+"Last-Translator: sidro <[email protected]>, 2021\n"
 "Language-Team: Romanian (https://www.transifex.com/mate/teams/13566/ro/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -48,7 +49,7 @@ msgstr ""
 #. (itstool) path: publisher/publishername
 #: C/index.docbook:52
 msgid "MATE Documentation Team"
-msgstr ""
+msgstr "Echipa de documentare MATE"
 
 #. (itstool) path: publisher/publishername
 #. (itstool) path: revdescription/para
@@ -595,9 +596,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -920,10 +922,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ru/ru.po b/help/ru/ru.po
index 6aece1f..1085da4 100644
--- a/help/ru/ru.po
+++ b/help/ru/ru.po
@@ -5,15 +5,17 @@
 # AlexL <[email protected]>, 2018
 # Wolfgang Ulbrich <[email protected]>, 2018
 # Михаил Ильинский <[email protected]>, 2018
-# Alex Putz, 2018
+# Alex Puts, 2018
 # Иван Л. <[email protected]>, 2021
+# Павел Коваленко, 2021
+# Ser82, 2022
 # 
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
-"Last-Translator: Иван Л. <[email protected]>, 2021\n"
+"Last-Translator: Ser82, 2022\n"
 "Language-Team: Russian (https://www.transifex.com/mate/teams/13566/ru/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -77,7 +79,7 @@ msgstr ""
 #. (itstool) path: articleinfo/copyright
 #: C/index.docbook:30
 msgid "<year>2015-2021</year> <holder>MATE Documentation Team</holder>"
-msgstr ""
+msgstr "<year>2015-2021</year> <holder>Команда документации MATE</holder>"
 
 #. (itstool) path: articleinfo/copyright
 #: C/index.docbook:34
@@ -161,8 +163,8 @@ msgid ""
 "<secondary>Manual</secondary> <tertiary>mate-power-manager</tertiary>"
 msgstr ""
 "<primary><application>Менеджер Питания "
-"MATE</application></primary><secondary>Инструкция</secondary><tertiary"
-">менеджер-питания-mate</tertiary>"
+"MATE</application></primary><secondary>Инструкция</secondary><tertiary>менеджер-"
+"питания-mate</tertiary>"
 
 #. (itstool) path: section/para
 #: C/index.docbook:135
@@ -195,11 +197,13 @@ msgid ""
 "Type <command>G_MESSAGES_DEBUG=PowerManager mate-power-manager --no-"
 "daemon</command>, then press <keycap>Return</keycap>:"
 msgstr ""
+"Наберите <command>G_MESSAGES_DEBUG=PowerManager mate-power-manager --no-"
+"daemon</command> и нажмите <keycap>Enter</keycap>:"
 
 #. (itstool) path: section/title
 #: C/index.docbook:162
 msgid "Notification Messages"
-msgstr ""
+msgstr "Уведомления"
 
 #. (itstool) path: section/para
 #: C/index.docbook:163
@@ -207,16 +211,19 @@ msgid ""
 "When <application>MATE Power Manager</application> has started, the "
 "following notifications may be displayed."
 msgstr ""
+"При запуске <application>Менеджера питания MATE</application> могут "
+"отображаться нижеуказанные уведомления."
 
 #. (itstool) path: section/title
 #: C/index.docbook:168
 msgid "AC Adapter Unplugged"
-msgstr ""
+msgstr "Адаптер переменного тока отключен"
 
 #. (itstool) path: figure/title
 #: C/index.docbook:170
 msgid "MATE Power Manager Notification when AC adapter is removed"
 msgstr ""
+"Уведомление Менеджера питания MATE при отключении адаптера переменного тока"
 
 #. (itstool) path: imageobject/imagedata
 #. This is a reference to an external file such as an image or video. When
@@ -236,11 +243,13 @@ msgid ""
 "You can disable this notification by changing the dconf key "
 "<command>org.mate.power-manager notify-discharging</command>."
 msgstr ""
+"Вы можете отключить это уведомление, изменив ключ dconf "
+"<command>org.mate.power-manager notify-discharging</command>."
 
 #. (itstool) path: section/title
 #: C/index.docbook:188
 msgid "Fully Charged"
-msgstr ""
+msgstr "Полностью заряжено"
 
 #. (itstool) path: figure/title
 #: C/index.docbook:190
@@ -572,7 +581,7 @@ msgstr ""
 #. (itstool) path: section/title
 #: C/index.docbook:434
 msgid "General Preferences"
-msgstr ""
+msgstr "Общие параметры"
 
 #. (itstool) path: figure/title
 #: C/index.docbook:436
@@ -642,9 +651,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -967,10 +977,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/si/si.po b/help/si/si.po
index 254d7f5..63525ab 100644
--- a/help/si/si.po
+++ b/help/si/si.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Sinhala (https://www.transifex.com/mate/teams/13566/si/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/sk/sk.po b/help/sk/sk.po
index f2060fd..1d3b7b9 100644
--- a/help/sk/sk.po
+++ b/help/sk/sk.po
@@ -8,7 +8,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Ján Ďanovský <[email protected]>, 2020\n"
 "Language-Team: Slovak (https://www.transifex.com/mate/teams/13566/sk/)\n"
@@ -602,9 +602,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -927,10 +928,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/sl/sl.po b/help/sl/sl.po
index f1a6169..dfb208f 100644
--- a/help/sl/sl.po
+++ b/help/sl/sl.po
@@ -3,13 +3,13 @@
 # Stefano Karapetsas <[email protected]>, 2018
 # Helena S <[email protected]>, 2018
 # jetomit <[email protected]>, 2018
-# Damir Mevkić <[email protected]>, 2019
+# Damir Mevkić 52K <[email protected]>, 2019
 # Arnold Marko <[email protected]>, 2019
 # 
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Arnold Marko <[email protected]>, 2019\n"
 "Language-Team: Slovenian (https://www.transifex.com/mate/teams/13566/sl/)\n"
@@ -598,9 +598,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -923,10 +924,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/sq/sq.po b/help/sq/sq.po
index 43dc0a6..bcd8413 100644
--- a/help/sq/sq.po
+++ b/help/sq/sq.po
@@ -9,7 +9,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Ardit Dani <[email protected]>, 2021\n"
 "Language-Team: Albanian (https://www.transifex.com/mate/teams/13566/sq/)\n"
@@ -601,9 +601,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -926,10 +927,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/sr/sr.po b/help/sr/sr.po
index 7776c80..13eff21 100644
--- a/help/sr/sr.po
+++ b/help/sr/sr.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Мирослав Николић <[email protected]>, 2021\n"
 "Language-Team: Serbian (https://www.transifex.com/mate/teams/13566/sr/)\n"
@@ -716,9 +716,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 "Да појаснимо, клизачи у „<command>mate-power-preferences</command>“ су "
 "постављени да започну на вредности „истек времена сесије + 1“ минут, јер не "
@@ -1129,10 +1130,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 "И проверите процес „<command>hald-addon-acpi</command>“. Ако није покренут, "
 "тада се уверите да HAL ради са опцијом „<command>--retain-"
diff --git a/help/sr@latin/[email protected] b/help/sr@latin/[email protected]
index 8beff41..359fe49 100644
--- a/help/sr@latin/[email protected]
+++ b/help/sr@latin/[email protected]
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Ivan Pejić <[email protected]>, 2018\n"
 "Language-Team: Serbian (Latin) (https://www.transifex.com/mate/teams/13566/sr@latin/)\n"
@@ -598,9 +598,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -923,10 +924,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/sv/sv.po b/help/sv/sv.po
index c0657a3..334aba0 100644
--- a/help/sv/sv.po
+++ b/help/sv/sv.po
@@ -11,7 +11,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Kristoffer Grundström <[email protected]>, 2021\n"
 "Language-Team: Swedish (https://www.transifex.com/mate/teams/13566/sv/)\n"
@@ -620,9 +620,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -951,10 +952,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ta/ta.po b/help/ta/ta.po
index 71a4f3d..00ba8eb 100644
--- a/help/ta/ta.po
+++ b/help/ta/ta.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Mooglie <[email protected]>, 2018\n"
 "Language-Team: Tamil (https://www.transifex.com/mate/teams/13566/ta/)\n"
@@ -598,9 +598,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -923,10 +924,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/te/te.po b/help/te/te.po
index dd23ef4..ed5a3da 100644
--- a/help/te/te.po
+++ b/help/te/te.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Telugu (https://www.transifex.com/mate/teams/13566/te/)\n"
@@ -595,9 +595,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -920,10 +921,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/th/th.po b/help/th/th.po
index 12816a8..913e485 100644
--- a/help/th/th.po
+++ b/help/th/th.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Akom <[email protected]>, 2018\n"
 "Language-Team: Thai (https://www.transifex.com/mate/teams/13566/th/)\n"
@@ -596,9 +596,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -921,10 +922,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/tr/tr.po b/help/tr/tr.po
index fa955c0..8649d0b 100644
--- a/help/tr/tr.po
+++ b/help/tr/tr.po
@@ -8,7 +8,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: 0d1bdb3b9a0d4e8f77bc854af8bf3dfc_e6913f4, 2019\n"
 "Language-Team: Turkish (https://www.transifex.com/mate/teams/13566/tr/)\n"
@@ -607,9 +607,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -932,10 +933,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ug/ug.po b/help/ug/ug.po
index 9703c3f..5d91475 100644
--- a/help/ug/ug.po
+++ b/help/ug/ug.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Uyghur (https://www.transifex.com/mate/teams/13566/ug/)\n"
@@ -603,9 +603,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -928,10 +929,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/uk/uk.po b/help/uk/uk.po
index 4d5ba1f..839b6c7 100644
--- a/help/uk/uk.po
+++ b/help/uk/uk.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Микола Ткач <[email protected]>, 2021\n"
 "Language-Team: Ukrainian (https://www.transifex.com/mate/teams/13566/uk/)\n"
@@ -626,9 +626,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -973,10 +974,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/ur/ur.po b/help/ur/ur.po
index e324f48..5847f77 100644
--- a/help/ur/ur.po
+++ b/help/ur/ur.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: mauron, 2018\n"
 "Language-Team: Urdu (https://www.transifex.com/mate/teams/13566/ur/)\n"
@@ -600,9 +600,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -925,10 +926,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/uz/uz.po b/help/uz/uz.po
index ace79c1..09170de 100644
--- a/help/uz/uz.po
+++ b/help/uz/uz.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Muzaffar Habibullayev <[email protected]>, 2018\n"
 "Language-Team: Uzbek (https://www.transifex.com/mate/teams/13566/uz/)\n"
@@ -595,9 +595,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -920,10 +921,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/vi/vi.po b/help/vi/vi.po
index e1459d5..581e63a 100644
--- a/help/vi/vi.po
+++ b/help/vi/vi.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Horazone Detex <[email protected]>, 2018\n"
 "Language-Team: Vietnamese (https://www.transifex.com/mate/teams/13566/vi/)\n"
@@ -596,9 +596,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -921,10 +922,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/wa/wa.po b/help/wa/wa.po
index 06a5547..896fecd 100644
--- a/help/wa/wa.po
+++ b/help/wa/wa.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Walloon (https://www.transifex.com/mate/teams/13566/wa/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/xh/xh.po b/help/xh/xh.po
index 8a8754b..63829ee 100644
--- a/help/xh/xh.po
+++ b/help/xh/xh.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Xhosa (https://www.transifex.com/mate/teams/13566/xh/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/yo/yo.po b/help/yo/yo.po
index bd44d98..ec23db4 100644
--- a/help/yo/yo.po
+++ b/help/yo/yo.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Stefano Karapetsas <[email protected]>, 2018\n"
 "Language-Team: Yoruba (https://www.transifex.com/mate/teams/13566/yo/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/zh-Hans/zh-Hans.po b/help/zh-Hans/zh-Hans.po
index e5ecb0c..153a260 100644
--- a/help/zh-Hans/zh-Hans.po
+++ b/help/zh-Hans/zh-Hans.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: Xiaoyuan Chen <[email protected]>, 2018\n"
 "Language-Team: Chinese Simplified (https://www.transifex.com/mate/teams/13566/zh-Hans/)\n"
@@ -594,9 +594,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -919,10 +920,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/zh_CN/zh_CN.po b/help/zh_CN/zh_CN.po
index d41b238..871d08a 100644
--- a/help/zh_CN/zh_CN.po
+++ b/help/zh_CN/zh_CN.po
@@ -6,13 +6,14 @@
 # Wolfgang Ulbrich <[email protected]>, 2018
 # biqiu-ssw <[email protected]>, 2018
 # CNAmira <[email protected]>, 2018
+# copi143 <[email protected]>, 2022
 # 
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
-"Last-Translator: CNAmira <[email protected]>, 2018\n"
+"Last-Translator: copi143 <[email protected]>, 2022\n"
 "Language-Team: Chinese (China) (https://www.transifex.com/mate/teams/13566/zh_CN/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -47,12 +48,12 @@ msgid ""
 "<application>MATE Power Manager</application> is a session daemon for the "
 "MATE Desktop that manages the power settings for your laptop or desktop "
 "computer."
-msgstr ""
+msgstr "<application></application>是 MATE Desktop 的会话守护进程，用于管理笔记本电脑或台式机的电源设置。"
 
 #. (itstool) path: articleinfo/copyright
 #: C/index.docbook:30
 msgid "<year>2015-2021</year> <holder>MATE Documentation Team</holder>"
-msgstr ""
+msgstr "<year>2015-2021</year>MATE 文档团队"
 
 #. (itstool) path: articleinfo/copyright
 #: C/index.docbook:34
@@ -118,7 +119,7 @@ msgstr ""
 #. (itstool) path: article/indexterm
 #: C/index.docbook:118
 msgid "<primary>mate-power-manager</primary>"
-msgstr ""
+msgstr "<primary>MATE 电源管理</primary>"
 
 #. (itstool) path: section/title
 #: C/index.docbook:125
@@ -131,13 +132,16 @@ msgid ""
 "<primary><application>MATE Power Manager</application></primary> "
 "<secondary>Manual</secondary> <tertiary>mate-power-manager</tertiary>"
 msgstr ""
+"<primary><application>MATE "
+"电源管理器</application></primary><secondary>手动</secondary><tertiary>mate-"
+"电源管理器</tertiary>"
 
 #. (itstool) path: section/para
 #: C/index.docbook:135
 msgid ""
 "The MATE Power Manager session daemon is a power management daemon for the "
 "<systemitem>MATE desktop</systemitem>"
-msgstr ""
+msgstr "MATE 电源管理器 会话守护进程是一个电源管理守护进程，用于<systemitem>MATE desktop</systemitem>"
 
 #. (itstool) path: section/title
 #: C/index.docbook:143
@@ -247,14 +251,14 @@ msgstr ""
 #. (itstool) path: section/title
 #: C/index.docbook:216
 msgid "Power Low"
-msgstr ""
+msgstr "低能耗"
 
 #. (itstool) path: section/para
 #: C/index.docbook:217
 msgid ""
 "When the battery is low, you will receive the following notification. You "
 "should consider switching to AC power really soon."
-msgstr ""
+msgstr "当电池电量不足时，您将收到以下通知。 您应该尽快切换到交流电源。 "
 
 #. (itstool) path: figure/title
 #: C/index.docbook:222
@@ -282,7 +286,7 @@ msgstr ""
 #. (itstool) path: section/title
 #: C/index.docbook:240
 msgid "Power Critical"
-msgstr ""
+msgstr "电量严重不足"
 
 #. (itstool) path: section/para
 #: C/index.docbook:241
@@ -290,7 +294,7 @@ msgid ""
 "When the computer has run out of power, it will show this notification "
 "explaining what action is required. You can change the critical low action "
 "using the preferences tool."
-msgstr ""
+msgstr "当计算机电量耗尽时，将显示此通知，说明需要采取什么措施。 您可以使用首选项工具更改电量严重不足时的操作。 "
 
 #. (itstool) path: figure/title
 #: C/index.docbook:247
@@ -313,7 +317,7 @@ msgstr ""
 #. (itstool) path: section/title
 #: C/index.docbook:259
 msgid "Suspend Failure"
-msgstr ""
+msgstr "挂起失败"
 
 #. (itstool) path: section/para
 #: C/index.docbook:260
@@ -610,9 +614,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -935,10 +940,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/zh_HK/zh_HK.po b/help/zh_HK/zh_HK.po
index 638768f..73cac15 100644
--- a/help/zh_HK/zh_HK.po
+++ b/help/zh_HK/zh_HK.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: tomoe_musashi <[email protected]>, 2018\n"
 "Language-Team: Chinese (Hong Kong) (https://www.transifex.com/mate/teams/13566/zh_HK/)\n"
@@ -598,9 +598,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -923,10 +924,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink
diff --git a/help/zh_TW/zh_TW.po b/help/zh_TW/zh_TW.po
index 478d70c..bb99bba 100644
--- a/help/zh_TW/zh_TW.po
+++ b/help/zh_TW/zh_TW.po
@@ -9,7 +9,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2021-01-16 14:35+0100\n"
+"POT-Creation-Date: 2022-10-29 15:32+0200\n"
 "PO-Revision-Date: 2018-10-04 15:52+0000\n"
 "Last-Translator: 黃柏諺 <[email protected]>, 2019\n"
 "Language-Team: Chinese (Taiwan) (https://www.transifex.com/mate/teams/13566/zh_TW/)\n"
@@ -604,9 +604,10 @@ msgid ""
 "To make this clearer, the sliders in <command>mate-power-"
 "preferences</command> are set to start at the value of the session-timeout +"
 " 1 minute, as we cannot logically trigger before the session is marked as "
-"idle. If you adjust the value of the 'session idle' timeout in <command"
-">mate-screensaver-preferences</command> then the start of the sliders in "
-"<command>mate-power-preferences</command> will change accordingly."
+"idle. If you adjust the value of the 'session idle' timeout in "
+"<command>mate-screensaver-preferences</command> then the start of the "
+"sliders in <command>mate-power-preferences</command> will change "
+"accordingly."
 msgstr ""
 
 #. (itstool) path: section/title
@@ -929,10 +930,10 @@ msgstr ""
 #: C/index.docbook:747
 msgid ""
 "And check for the process <command>hald-addon-acpi</command>. If it is not "
-"being run, then please make sure that HAL is being run with the <command"
-">--retain-privileges</command> option in the <command>haldaemon</command> "
-"initscript. An alternative to this is to use acpid, rather than the kernel "
-"proc file."
+"being run, then please make sure that HAL is being run with the "
+"<command>--retain-privileges</command> option in the "
+"<command>haldaemon</command> initscript. An alternative to this is to use "
+"acpid, rather than the kernel proc file."
 msgstr ""
 
 #. (itstool) path: para/ulink